diff options
| author | Peter Chen <peter.chen@nxp.com> | 2020-09-02 11:57:32 +0200 |
|---|---|---|
| committer | Felipe Balbi <balbi@kernel.org> | 2020-10-02 08:57:38 +0200 |
| commit | b1234e3b3b265588bab1e7a28508621045b87efa (patch) | |
| tree | f20257a026b57cf81525bea8b1433d5df5d9c6f9 /drivers/usb/cdns3/gadget.c | |
| parent | usb: cdns3: introduce set_phy_power_on{off} APIs (diff) | |
| download | linux-b1234e3b3b265588bab1e7a28508621045b87efa.tar.xz linux-b1234e3b3b265588bab1e7a28508621045b87efa.zip | |
usb: cdns3: add runtime PM support
Introduce runtime PM and wakeup interrupt handler for cdns3,
the runtime PM is default off since other cdns3 may not
implement glue layer support for runtime PM.
One typical wakeup event use case is xHCI runtime suspend will clear
USBCMD.RS bit, after that the xHCI will not trigger any interrupts,
so its parent (cdns core device) needs to resume xHCI device when
any (wakeup) events occurs at host port.
When the controller is in low power mode, the lpm flag will be set.
The interrupt triggered later than lpm flag is set considers as
wakeup interrupt and handled at cdns_wakeup_irq. Once the wakeup
occurs, it first disables interrupt to avoid later interrupt
occurrence since the controller is in low power mode at that
time, and access registers may be invalid at that time. At wakeup
handler, it will call pm_request_resume to wakeup xHCI device, and
at runtime resume handler, it will enable interrupt again.
The API platform_suspend is introduced for glue layer to implement
platform specific PM sequence.
Reviewed-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Diffstat (limited to 'drivers/usb/cdns3/gadget.c')
| -rw-r--r-- | drivers/usb/cdns3/gadget.c | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index 02a69e20014b..9e6ff7d00784 100644 --- a/drivers/usb/cdns3/gadget.c +++ b/drivers/usb/cdns3/gadget.c @@ -1769,9 +1769,13 @@ static void cdns3_check_usb_interrupt_proceed(struct cdns3_device *priv_dev, static irqreturn_t cdns3_device_irq_handler(int irq, void *data) { struct cdns3_device *priv_dev = data; + struct cdns3 *cdns = dev_get_drvdata(priv_dev->dev); irqreturn_t ret = IRQ_NONE; u32 reg; + if (cdns->in_lpm) + return ret; + /* check USB device interrupt */ reg = readl(&priv_dev->regs->usb_ists); if (reg) { |