diff options
| author | Stephen Boyd <stephen.boyd@linaro.org> | 2017-01-25 23:32:43 +0100 |
|---|---|---|
| committer | Peter Chen <peter.chen@nxp.com> | 2017-02-03 09:48:33 +0100 |
| commit | 490b63e6de63d13e82110f4cb5f1aa31dd27245a (patch) | |
| tree | 1d45dd8d07addd4a1ea85de080197f1f93b4ca43 /drivers/usb/chipidea | |
| parent | usb: chipidea: usb2: delete the redundant setting default DMA mask code (diff) | |
| download | linux-490b63e6de63d13e82110f4cb5f1aa31dd27245a.tar.xz linux-490b63e6de63d13e82110f4cb5f1aa31dd27245a.zip | |
usb: chipidea: Configure phy for appropriate mode
When the qcom chipidea controller is used with an extcon, we need
to signal device mode or host mode to the phy so it can configure
itself for the correct mode. This should be done after the phy is
powered up, so that the register writes work correctly. Add in
the appropriate phy_set_mode() call here.
Cc: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Diffstat (limited to 'drivers/usb/chipidea')
| -rw-r--r-- | drivers/usb/chipidea/core.c | 20 |
1 files changed, 14 insertions, 6 deletions
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index bcb3a9c360d4..79ad8e91632e 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -427,13 +427,21 @@ void ci_platform_configure(struct ci_hdrc *ci) is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC; is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC; - if (is_device_mode && - (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING)) - hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS); + if (is_device_mode) { + phy_set_mode(ci->phy, PHY_MODE_USB_DEVICE); - if (is_host_mode && - (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING)) - hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS); + if (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING) + hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, + USBMODE_CI_SDIS); + } + + if (is_host_mode) { + phy_set_mode(ci->phy, PHY_MODE_USB_HOST); + + if (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING) + hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, + USBMODE_CI_SDIS); + } if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) { if (ci->hw_bank.lpm) |