USB: Allow USB 3.0 ports to be disabled.

If hot and warm reset fails, or a port remains in the Compliance Mode,
the USB core needs to be able to disable a USB 3.0 port.  Unlike USB 2.0
ports, once the port is placed into the Disabled link state, it will not
report any new device connects.  To get device connect notifications, we
need to put the link into the Disabled state, and then the RxDetect
state.

The xHCI driver needs to atomically clear all change bits on USB 3.0
port disable, so that we get Port Status Change Events for future port
changes.  We could technically do this in the USB core instead of in the
xHCI roothub code, since the port state machine can't advance out of the
disabled state until we set the link state to RxDetect.  However,
external USB 3.0 hubs don't need this code.  They are level-triggered,
not edge-triggered like xHCI, so they will continue to send interrupt
events when any change bit is set.  Therefore it doesn't make sense to
put this code in the USB core.

This patch is part of a series to fix several reports of infinite loops
on device enumeration failure.  This includes John, when he boots with
a USB 3.0 device (Roseweil eusb3 enclosure) attached to his NEC 0.96
host controller.  The fix requires warm reset support, so it does not
make sense to backport this patch to stable kernels without warm reset
support.

This patch should be backported to kernels as old as 3.2, contain the
commit ID 75d7cf72ab9fa01dc70877aa5c68e8ef477229dc "usbcore: refine warm
reset logic"

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: John Covici <covici@ccs.covici.com>
Cc: stable@vger.kernel.org

1 files changed, 61 insertions, 2 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 3bc50fc110eb..968ec37a0f02 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -877,6 +877,60 @@ static int hub_hub_status(struct usb_hub *hub,
 	return ret;
 }
 
+static int hub_set_port_link_state(struct usb_hub *hub, int port1,
+			unsigned int link_status)
+{
+	return set_port_feature(hub->hdev,
+			port1 | (link_status << 3),
+			USB_PORT_FEAT_LINK_STATE);
+}
+
+/*
+ * If USB 3.0 ports are placed into the Disabled state, they will no longer
+ * detect any device connects or disconnects.  This is generally not what the
+ * USB core wants, since it expects a disabled port to produce a port status
+ * change event when a new device connects.
+ *
+ * Instead, set the link state to Disabled, wait for the link to settle into
+ * that state, clear any change bits, and then put the port into the RxDetect
+ * state.
+ */
+static int hub_usb3_port_disable(struct usb_hub *hub, int port1)
+{
+	int ret;
+	int total_time;
+	u16 portchange, portstatus;
+
+	if (!hub_is_superspeed(hub->hdev))
+		return -EINVAL;
+
+	ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED);
+	if (ret) {
+		dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
+				port1, ret);
+		return ret;
+	}
+
+	/* Wait for the link to enter the disabled state. */
+	for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
+		ret = hub_port_status(hub, port1, &portstatus, &portchange);
+		if (ret < 0)
+			return ret;
+
+		if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+				USB_SS_PORT_LS_SS_DISABLED)
+			break;
+		if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+			break;
+		msleep(HUB_DEBOUNCE_STEP);
+	}
+	if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+		dev_warn(hub->intfdev, "Could not disable port %d after %d ms\n",
+				port1, total_time);
+
+	return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT);
+}
+
 static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
 {
 	struct usb_device *hdev = hub->hdev;
@@ -885,8 +939,13 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
 	if (hub->ports[port1 - 1]->child && set_state)
 		usb_set_device_state(hub->ports[port1 - 1]->child,
 				USB_STATE_NOTATTACHED);
-	if (!hub->error && !hub_is_superspeed(hub->hdev))
-		ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
+	if (!hub->error) {
+		if (hub_is_superspeed(hub->hdev))
+			ret = hub_usb3_port_disable(hub, port1);
+		else
+			ret = clear_port_feature(hdev, port1,
+					USB_PORT_FEAT_ENABLE);
+	}
 	if (ret)
 		dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
 				port1, ret);