Backmerge tag 'v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next

Linux 6.4-rc7

Need this to pull in the msm work.

Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 46 insertions, 34 deletions

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index c0ca4d12f95d..b78599dd705c 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -198,6 +198,7 @@ static void dwc3_gadget_del_and_unmap_request(struct dwc3_ep *dep,
 	list_del(&req->list);
 	req->remaining = 0;
 	req->needs_extra_trb = false;
+	req->num_trbs = 0;
 
 	if (req->request.status == -EINPROGRESS)
 		req->request.status = status;
@@ -2440,6 +2441,7 @@ static int dwc3_gadget_func_wakeup(struct usb_gadget *g, int intf_id)
 			return -EINVAL;
 		}
 		dwc3_resume_gadget(dwc);
+		dwc->suspended = false;
 		dwc->link_state = DWC3_LINK_STATE_U0;
 	}
 
@@ -2699,6 +2701,21 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc)
 	return ret;
 }
 
+static int dwc3_gadget_soft_connect(struct dwc3 *dwc)
+{
+	/*
+	 * In the Synopsys DWC_usb31 1.90a programming guide section
+	 * 4.1.9, it specifies that for a reconnect after a
+	 * device-initiated disconnect requires a core soft reset
+	 * (DCTL.CSftRst) before enabling the run/stop bit.
+	 */
+	dwc3_core_soft_reset(dwc);
+
+	dwc3_event_buffers_setup(dwc);
+	__dwc3_gadget_start(dwc);
+	return dwc3_gadget_run_stop(dwc, true);
+}
+
 static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 {
 	struct dwc3		*dwc = gadget_to_dwc(g);
@@ -2737,21 +2754,10 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 
 	synchronize_irq(dwc->irq_gadget);
 
-	if (!is_on) {
+	if (!is_on)
 		ret = dwc3_gadget_soft_disconnect(dwc);
-	} else {
-		/*
-		 * In the Synopsys DWC_usb31 1.90a programming guide section
-		 * 4.1.9, it specifies that for a reconnect after a
-		 * device-initiated disconnect requires a core soft reset
-		 * (DCTL.CSftRst) before enabling the run/stop bit.
-		 */
-		dwc3_core_soft_reset(dwc);
-
-		dwc3_event_buffers_setup(dwc);
-		__dwc3_gadget_start(dwc);
-		ret = dwc3_gadget_run_stop(dwc, true);
-	}
+	else
+		ret = dwc3_gadget_soft_connect(dwc);
 
 	pm_runtime_put(dwc->dev);
 
@@ -3938,6 +3944,8 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
 {
 	int			reg;
 
+	dwc->suspended = false;
+
 	dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RX_DET);
 
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
@@ -3962,6 +3970,8 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 {
 	u32			reg;
 
+	dwc->suspended = false;
+
 	/*
 	 * Ideally, dwc3_reset_gadget() would trigger the function
 	 * drivers to stop any active transfers through ep disable.
@@ -4180,6 +4190,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 
 static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc, unsigned int evtinfo)
 {
+	dwc->suspended = false;
+
 	/*
 	 * TODO take core out of low power mode when that's
 	 * implemented.
@@ -4277,6 +4289,7 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
 		if (dwc->gadget->wakeup_armed) {
 			dwc3_gadget_enable_linksts_evts(dwc, false);
 			dwc3_resume_gadget(dwc);
+			dwc->suspended = false;
 		}
 		break;
 	case DWC3_LINK_STATE_U1:
@@ -4303,8 +4316,10 @@ static void dwc3_gadget_suspend_interrupt(struct dwc3 *dwc,
 {
 	enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK;
 
-	if (dwc->link_state != next && next == DWC3_LINK_STATE_U3)
+	if (!dwc->suspended && next == DWC3_LINK_STATE_U3) {
+		dwc->suspended = true;
 		dwc3_suspend_gadget(dwc);
+	}
 
 	dwc->link_state = next;
 }
@@ -4655,42 +4670,39 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
 int dwc3_gadget_suspend(struct dwc3 *dwc)
 {
 	unsigned long flags;
+	int ret;
 
 	if (!dwc->gadget_driver)
 		return 0;
 
-	dwc3_gadget_run_stop(dwc, false);
+	ret = dwc3_gadget_soft_disconnect(dwc);
+	if (ret)
+		goto err;
 
 	spin_lock_irqsave(&dwc->lock, flags);
 	dwc3_disconnect_gadget(dwc);
-	__dwc3_gadget_stop(dwc);
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return 0;
+
+err:
+	/*
+	 * Attempt to reset the controller's state. Likely no
+	 * communication can be established until the host
+	 * performs a port reset.
+	 */
+	if (dwc->softconnect)
+		dwc3_gadget_soft_connect(dwc);
+
+	return ret;
 }
 
 int dwc3_gadget_resume(struct dwc3 *dwc)
 {
-	int			ret;
-
 	if (!dwc->gadget_driver || !dwc->softconnect)
 		return 0;
 
-	ret = __dwc3_gadget_start(dwc);
-	if (ret < 0)
-		goto err0;
-
-	ret = dwc3_gadget_run_stop(dwc, true);
-	if (ret < 0)
-		goto err1;
-
-	return 0;
-
-err1:
-	__dwc3_gadget_stop(dwc);
-
-err0:
-	return ret;
+	return dwc3_gadget_soft_connect(dwc);
 }
 
 void dwc3_gadget_process_pending_events(struct dwc3 *dwc)