Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 2167 insertions, 0 deletions

diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
new file mode 100644
index 000000000000..0def9f70e889
--- /dev/null
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -0,0 +1,2167 @@
+/*
+ * linux/drivers/usb/gadget/lh7a40x_udc.c
+ * Sharp LH7A40x on-chip full speed USB device controllers
+ *
+ * Copyright (C) 2004 Mikko Lahteenmaki, Nordic ID
+ * Copyright (C) 2004 Bo Henriksen, Nordic ID
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include "lh7a40x_udc.h"
+
+//#define DEBUG printk
+//#define DEBUG_EP0 printk
+//#define DEBUG_SETUP printk
+
+#ifndef DEBUG_EP0
+# define DEBUG_EP0(fmt,args...)
+#endif
+#ifndef DEBUG_SETUP
+# define DEBUG_SETUP(fmt,args...)
+#endif
+#ifndef DEBUG
+# define NO_STATES
+# define DEBUG(fmt,args...)
+#endif
+
+#define	DRIVER_DESC			"LH7A40x USB Device Controller"
+#define	DRIVER_VERSION		__DATE__
+
+#ifndef _BIT			/* FIXME - what happended to _BIT in 2.6.7bk18? */
+#define _BIT(x) (1<<(x))
+#endif
+
+struct lh7a40x_udc *the_controller;
+
+static const char driver_name[] = "lh7a40x_udc";
+static const char driver_desc[] = DRIVER_DESC;
+static const char ep0name[] = "ep0-control";
+
+/*
+  Local definintions.
+*/
+
+#ifndef NO_STATES
+static char *state_names[] = {
+	"WAIT_FOR_SETUP",
+	"DATA_STATE_XMIT",
+	"DATA_STATE_NEED_ZLP",
+	"WAIT_FOR_OUT_STATUS",
+	"DATA_STATE_RECV"
+};
+#endif
+
+/*
+  Local declarations.
+*/
+static int lh7a40x_ep_enable(struct usb_ep *ep,
+			     const struct usb_endpoint_descriptor *);
+static int lh7a40x_ep_disable(struct usb_ep *ep);
+static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, int);
+static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *);
+static void *lh7a40x_alloc_buffer(struct usb_ep *ep, unsigned, dma_addr_t *,
+				  int);
+static void lh7a40x_free_buffer(struct usb_ep *ep, void *, dma_addr_t,
+				unsigned);
+static int lh7a40x_queue(struct usb_ep *ep, struct usb_request *, int);
+static int lh7a40x_dequeue(struct usb_ep *ep, struct usb_request *);
+static int lh7a40x_set_halt(struct usb_ep *ep, int);
+static int lh7a40x_fifo_status(struct usb_ep *ep);
+static int lh7a40x_fifo_status(struct usb_ep *ep);
+static void lh7a40x_fifo_flush(struct usb_ep *ep);
+static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep);
+static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr);
+
+static void done(struct lh7a40x_ep *ep, struct lh7a40x_request *req,
+		 int status);
+static void pio_irq_enable(int bEndpointAddress);
+static void pio_irq_disable(int bEndpointAddress);
+static void stop_activity(struct lh7a40x_udc *dev,
+			  struct usb_gadget_driver *driver);
+static void flush(struct lh7a40x_ep *ep);
+static void udc_enable(struct lh7a40x_udc *dev);
+static void udc_set_address(struct lh7a40x_udc *dev, unsigned char address);
+
+static struct usb_ep_ops lh7a40x_ep_ops = {
+	.enable = lh7a40x_ep_enable,
+	.disable = lh7a40x_ep_disable,
+
+	.alloc_request = lh7a40x_alloc_request,
+	.free_request = lh7a40x_free_request,
+
+	.alloc_buffer = lh7a40x_alloc_buffer,
+	.free_buffer = lh7a40x_free_buffer,
+
+	.queue = lh7a40x_queue,
+	.dequeue = lh7a40x_dequeue,
+
+	.set_halt = lh7a40x_set_halt,
+	.fifo_status = lh7a40x_fifo_status,
+	.fifo_flush = lh7a40x_fifo_flush,
+};
+
+/* Inline code */
+
+static __inline__ int write_packet(struct lh7a40x_ep *ep,
+				   struct lh7a40x_request *req, int max)
+{
+	u8 *buf;
+	int length, count;
+	volatile u32 *fifo = (volatile u32 *)ep->fifo;
+
+	buf = req->req.buf + req->req.actual;
+	prefetch(buf);
+
+	length = req->req.length - req->req.actual;
+	length = min(length, max);
+	req->req.actual += length;
+
+	DEBUG("Write %d (max %d), fifo %p\n", length, max, fifo);
+
+	count = length;
+	while (count--) {
+		*fifo = *buf++;
+	}
+
+	return length;
+}
+
+static __inline__ void usb_set_index(u32 ep)
+{
+	*(volatile u32 *)io_p2v(USB_INDEX) = ep;
+}
+
+static __inline__ u32 usb_read(u32 port)
+{
+	return *(volatile u32 *)io_p2v(port);
+}
+
+static __inline__ void usb_write(u32 val, u32 port)
+{
+	*(volatile u32 *)io_p2v(port) = val;
+}
+
+static __inline__ void usb_set(u32 val, u32 port)
+{
+	volatile u32 *ioport = (volatile u32 *)io_p2v(port);
+	u32 after = (*ioport) | val;
+	*ioport = after;
+}
+
+static __inline__ void usb_clear(u32 val, u32 port)
+{
+	volatile u32 *ioport = (volatile u32 *)io_p2v(port);
+	u32 after = (*ioport) & ~val;
+	*ioport = after;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define GPIO_PORTC_DR 	(0x80000E08)
+#define GPIO_PORTC_DDR 	(0x80000E18)
+#define GPIO_PORTC_PDR 	(0x80000E70)
+
+/* get port C pin data register */
+#define get_portc_pdr(bit) 		((usb_read(GPIO_PORTC_PDR) & _BIT(bit)) != 0)
+/* get port C data direction register */
+#define get_portc_ddr(bit) 		((usb_read(GPIO_PORTC_DDR) & _BIT(bit)) != 0)
+/* set port C data register */
+#define set_portc_dr(bit, val) 	(val ? usb_set(_BIT(bit), GPIO_PORTC_DR) : usb_clear(_BIT(bit), GPIO_PORTC_DR))
+/* set port C data direction register */
+#define set_portc_ddr(bit, val) (val ? usb_set(_BIT(bit), GPIO_PORTC_DDR) : usb_clear(_BIT(bit), GPIO_PORTC_DDR))
+
+/*
+ * LPD7A404 GPIO's:
+ * Port C bit 1 = USB Port 1 Power Enable
+ * Port C bit 2 = USB Port 1 Data Carrier Detect
+ */
+#define is_usb_connected() 		get_portc_pdr(2)
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static const char proc_node_name[] = "driver/udc";
+
+static int
+udc_proc_read(char *page, char **start, off_t off, int count,
+	      int *eof, void *_dev)
+{
+	char *buf = page;
+	struct lh7a40x_udc *dev = _dev;
+	char *next = buf;
+	unsigned size = count;
+	unsigned long flags;
+	int t;
+
+	if (off != 0)
+		return 0;
+
+	local_irq_save(flags);
+
+	/* basic device status */
+	t = scnprintf(next, size,
+		      DRIVER_DESC "\n"
+		      "%s version: %s\n"
+		      "Gadget driver: %s\n"
+		      "Host: %s\n\n",
+		      driver_name, DRIVER_VERSION,
+		      dev->driver ? dev->driver->driver.name : "(none)",
+		      is_usb_connected()? "full speed" : "disconnected");
+	size -= t;
+	next += t;
+
+	t = scnprintf(next, size,
+		      "GPIO:\n"
+		      " Port C bit 1: %d, dir %d\n"
+		      " Port C bit 2: %d, dir %d\n\n",
+		      get_portc_pdr(1), get_portc_ddr(1),
+		      get_portc_pdr(2), get_portc_ddr(2)
+	    );
+	size -= t;
+	next += t;
+
+	t = scnprintf(next, size,
+		      "DCP pullup: %d\n\n",
+		      (usb_read(USB_PM) & PM_USB_DCP) != 0);
+	size -= t;
+	next += t;
+
+	local_irq_restore(flags);
+	*eof = 1;
+	return count - size;
+}
+
+#define create_proc_files() 	create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev)
+#define remove_proc_files() 	remove_proc_entry(proc_node_name, NULL)
+
+#else	/* !CONFIG_USB_GADGET_DEBUG_FILES */
+
+#define create_proc_files() do {} while (0)
+#define remove_proc_files() do {} while (0)
+
+#endif	/* CONFIG_USB_GADGET_DEBUG_FILES */
+
+/*
+ * 	udc_disable - disable USB device controller
+ */
+static void udc_disable(struct lh7a40x_udc *dev)
+{
+	DEBUG("%s, %p\n", __FUNCTION__, dev);
+
+	udc_set_address(dev, 0);
+
+	/* Disable interrupts */
+	usb_write(0, USB_IN_INT_EN);
+	usb_write(0, USB_OUT_INT_EN);
+	usb_write(0, USB_INT_EN);
+
+	/* Disable the USB */
+	usb_write(0, USB_PM);
+
+#ifdef CONFIG_ARCH_LH7A404
+	/* Disable USB power */
+	set_portc_dr(1, 0);
+#endif
+
+	/* if hardware supports it, disconnect from usb */
+	/* make_usb_disappear(); */
+
+	dev->ep0state = WAIT_FOR_SETUP;
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+	dev->usb_address = 0;
+}
+
+/*
+ * 	udc_reinit - initialize software state
+ */
+static void udc_reinit(struct lh7a40x_udc *dev)
+{
+	u32 i;
+
+	DEBUG("%s, %p\n", __FUNCTION__, dev);
+
+	/* device/ep0 records init */
+	INIT_LIST_HEAD(&dev->gadget.ep_list);
+	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+	dev->ep0state = WAIT_FOR_SETUP;
+
+	/* basic endpoint records init */
+	for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
+		struct lh7a40x_ep *ep = &dev->ep[i];
+
+		if (i != 0)
+			list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
+
+		ep->desc = 0;
+		ep->stopped = 0;
+		INIT_LIST_HEAD(&ep->queue);
+		ep->pio_irqs = 0;
+	}
+
+	/* the rest was statically initialized, and is read-only */
+}
+
+#define BYTES2MAXP(x)	(x / 8)
+#define MAXP2BYTES(x)	(x * 8)
+
+/* until it's enabled, this UDC should be completely invisible
+ * to any USB host.
+ */
+static void udc_enable(struct lh7a40x_udc *dev)
+{
+	int ep;
+
+	DEBUG("%s, %p\n", __FUNCTION__, dev);
+
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+
+#ifdef CONFIG_ARCH_LH7A404
+	/* Set Port C bit 1 & 2 as output */
+	set_portc_ddr(1, 1);
+	set_portc_ddr(2, 1);
+
+	/* Enable USB power */
+	set_portc_dr(1, 0);
+#endif
+
+	/*
+	 * C.f Chapter 18.1.3.1 Initializing the USB
+	 */
+
+	/* Disable the USB */
+	usb_clear(PM_USB_ENABLE, USB_PM);
+
+	/* Reset APB & I/O sides of the USB */
+	usb_set(USB_RESET_APB | USB_RESET_IO, USB_RESET);
+	mdelay(5);
+	usb_clear(USB_RESET_APB | USB_RESET_IO, USB_RESET);
+
+	/* Set MAXP values for each */
+	for (ep = 0; ep < UDC_MAX_ENDPOINTS; ep++) {
+		struct lh7a40x_ep *ep_reg = &dev->ep[ep];
+		u32 csr;
+
+		usb_set_index(ep);
+
+		switch (ep_reg->ep_type) {
+		case ep_bulk_in:
+		case ep_interrupt:
+			usb_clear(USB_IN_CSR2_USB_DMA_EN | USB_IN_CSR2_AUTO_SET,
+				  ep_reg->csr2);
+			/* Fall through */
+		case ep_control:
+			usb_write(BYTES2MAXP(ep_maxpacket(ep_reg)),
+				  USB_IN_MAXP);
+			break;
+		case ep_bulk_out:
+			usb_clear(USB_OUT_CSR2_USB_DMA_EN |
+				  USB_OUT_CSR2_AUTO_CLR, ep_reg->csr2);
+			usb_write(BYTES2MAXP(ep_maxpacket(ep_reg)),
+				  USB_OUT_MAXP);
+			break;
+		}
+
+		/* Read & Write CSR1, just in case */
+		csr = usb_read(ep_reg->csr1);
+		usb_write(csr, ep_reg->csr1);
+
+		flush(ep_reg);
+	}
+
+	/* Disable interrupts */
+	usb_write(0, USB_IN_INT_EN);
+	usb_write(0, USB_OUT_INT_EN);
+	usb_write(0, USB_INT_EN);
+
+	/* Enable interrupts */
+	usb_set(USB_IN_INT_EP0, USB_IN_INT_EN);
+	usb_set(USB_INT_RESET_INT | USB_INT_RESUME_INT, USB_INT_EN);
+	/* Dont enable rest of the interrupts */
+	/* usb_set(USB_IN_INT_EP3 | USB_IN_INT_EP1 | USB_IN_INT_EP0, USB_IN_INT_EN);
+	   usb_set(USB_OUT_INT_EP2, USB_OUT_INT_EN); */
+
+	/* Enable SUSPEND */
+	usb_set(PM_ENABLE_SUSPEND, USB_PM);
+
+	/* Enable the USB */
+	usb_set(PM_USB_ENABLE, USB_PM);
+
+#ifdef CONFIG_ARCH_LH7A404
+	/* NOTE: DOES NOT WORK! */
+	/* Let host detect UDC:
+	 * Software must write a 0 to the PMR:DCP_CTRL bit to turn this
+	 * transistor on and pull the USBDP pin HIGH.
+	 */
+	/* usb_clear(PM_USB_DCP, USB_PM);
+	   usb_set(PM_USB_DCP, USB_PM); */
+#endif
+}
+
+/*
+  Register entry point for the peripheral controller driver.
+*/
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+	struct lh7a40x_udc *dev = the_controller;
+	int retval;
+
+	DEBUG("%s: %s\n", __FUNCTION__, driver->driver.name);
+
+	if (!driver
+	    || driver->speed != USB_SPEED_FULL
+	    || !driver->bind
+	    || !driver->unbind || !driver->disconnect || !driver->setup)
+		return -EINVAL;
+	if (!dev)
+		return -ENODEV;
+	if (dev->driver)
+		return -EBUSY;
+
+	/* first hook up the driver ... */
+	dev->driver = driver;
+	dev->gadget.dev.driver = &driver->driver;
+
+	device_add(&dev->gadget.dev);
+	retval = driver->bind(&dev->gadget);
+	if (retval) {
+		printk("%s: bind to driver %s --> error %d\n", dev->gadget.name,
+		       driver->driver.name, retval);
+		device_del(&dev->gadget.dev);
+
+		dev->driver = 0;
+		dev->gadget.dev.driver = 0;
+		return retval;
+	}
+
+	/* ... then enable host detection and ep0; and we're ready
+	 * for set_configuration as well as eventual disconnect.
+	 * NOTE:  this shouldn't power up until later.
+	 */
+	printk("%s: registered gadget driver '%s'\n", dev->gadget.name,
+	       driver->driver.name);
+
+	udc_enable(dev);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+/*
+  Unregister entry point for the peripheral controller driver.
+*/
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct lh7a40x_udc *dev = the_controller;
+	unsigned long flags;
+
+	if (!dev)
+		return -ENODEV;
+	if (!driver || driver != dev->driver)
+		return -EINVAL;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	dev->driver = 0;
+	stop_activity(dev, driver);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	driver->unbind(&dev->gadget);
+	device_del(&dev->gadget.dev);
+
+	udc_disable(dev);
+
+	DEBUG("unregistered gadget driver '%s'\n", driver->driver.name);
+	return 0;
+}
+
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+/*-------------------------------------------------------------------------*/
+
+/** Write request to FIFO (max write == maxp size)
+ *  Return:  0 = still running, 1 = completed, negative = errno
+ *  NOTE: INDEX register must be set for EP
+ */
+static int write_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
+{
+	u32 max;
+	u32 csr;
+
+	max = le16_to_cpu(ep->desc->wMaxPacketSize);
+
+	csr = usb_read(ep->csr1);
+	DEBUG("CSR: %x %d\n", csr, csr & USB_IN_CSR1_FIFO_NOT_EMPTY);
+
+	if (!(csr & USB_IN_CSR1_FIFO_NOT_EMPTY)) {
+		unsigned count;
+		int is_last, is_short;
+
+		count = write_packet(ep, req, max);
+		usb_set(USB_IN_CSR1_IN_PKT_RDY, ep->csr1);
+
+		/* last packet is usually short (or a zlp) */
+		if (unlikely(count != max))
+			is_last = is_short = 1;
+		else {
+			if (likely(req->req.length != req->req.actual)
+			    || req->req.zero)
+				is_last = 0;
+			else
+				is_last = 1;
+			/* interrupt/iso maxpacket may not fill the fifo */
+			is_short = unlikely(max < ep_maxpacket(ep));
+		}
+
+		DEBUG("%s: wrote %s %d bytes%s%s %d left %p\n", __FUNCTION__,
+		      ep->ep.name, count,
+		      is_last ? "/L" : "", is_short ? "/S" : "",
+		      req->req.length - req->req.actual, req);
+
+		/* requests complete when all IN data is in the FIFO */
+		if (is_last) {
+			done(ep, req, 0);
+			if (list_empty(&ep->queue)) {
+				pio_irq_disable(ep_index(ep));
+			}
+			return 1;
+		}
+	} else {
+		DEBUG("Hmm.. %d ep FIFO is not empty!\n", ep_index(ep));
+	}
+
+	return 0;
+}
+
+/** Read to request from FIFO (max read == bytes in fifo)
+ *  Return:  0 = still running, 1 = completed, negative = errno
+ *  NOTE: INDEX register must be set for EP
+ */
+static int read_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
+{
+	u32 csr;
+	u8 *buf;
+	unsigned bufferspace, count, is_short;
+	volatile u32 *fifo = (volatile u32 *)ep->fifo;
+
+	/* make sure there's a packet in the FIFO. */
+	csr = usb_read(ep->csr1);
+	if (!(csr & USB_OUT_CSR1_OUT_PKT_RDY)) {
+		DEBUG("%s: Packet NOT ready!\n", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	buf = req->req.buf + req->req.actual;
+	prefetchw(buf);
+	bufferspace = req->req.length - req->req.actual;
+
+	/* read all bytes from this packet */
+	count = usb_read(USB_OUT_FIFO_WC1);
+	req->req.actual += min(count, bufferspace);
+
+	is_short = (count < ep->ep.maxpacket);
+	DEBUG("read %s %02x, %d bytes%s req %p %d/%d\n",
+	      ep->ep.name, csr, count,
+	      is_short ? "/S" : "", req, req->req.actual, req->req.length);
+
+	while (likely(count-- != 0)) {
+		u8 byte = (u8) (*fifo & 0xff);
+
+		if (unlikely(bufferspace == 0)) {
+			/* this happens when the driver's buffer
+			 * is smaller than what the host sent.
+			 * discard the extra data.
+			 */
+			if (req->req.status != -EOVERFLOW)
+				printk("%s overflow %d\n", ep->ep.name, count);
+			req->req.status = -EOVERFLOW;
+		} else {
+			*buf++ = byte;
+			bufferspace--;
+		}
+	}
+
+	usb_clear(USB_OUT_CSR1_OUT_PKT_RDY, ep->csr1);
+
+	/* completion */
+	if (is_short || req->req.actual == req->req.length) {
+		done(ep, req, 0);
+		usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1);
+
+		if (list_empty(&ep->queue))
+			pio_irq_disable(ep_index(ep));
+		return 1;
+	}
+
+	/* finished that packet.  the next one may be waiting... */
+	return 0;
+}
+
+/*
+ *	done - retire a request; caller blocked irqs
+ *  INDEX register is preserved to keep same
+ */
+static void done(struct lh7a40x_ep *ep, struct lh7a40x_request *req, int status)
+{
+	unsigned int stopped = ep->stopped;
+	u32 index;
+
+	DEBUG("%s, %p\n", __FUNCTION__, ep);
+	list_del_init(&req->queue);
+
+	if (likely(req->req.status == -EINPROGRESS))
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	if (status && status != -ESHUTDOWN)
+		DEBUG("complete %s req %p stat %d len %u/%u\n",
+		      ep->ep.name, &req->req, status,
+		      req->req.actual, req->req.length);
+
+	/* don't modify queue heads during completion callback */
+	ep->stopped = 1;
+	/* Read current index (completion may modify it) */
+	index = usb_read(USB_INDEX);
+
+	spin_unlock(&ep->dev->lock);
+	req->req.complete(&ep->ep, &req->req);
+	spin_lock(&ep->dev->lock);
+
+	/* Restore index */
+	usb_set_index(index);
+	ep->stopped = stopped;
+}
+
+/** Enable EP interrupt */
+static void pio_irq_enable(int ep)
+{
+	DEBUG("%s: %d\n", __FUNCTION__, ep);
+
+	switch (ep) {
+	case 1:
+		usb_set(USB_IN_INT_EP1, USB_IN_INT_EN);
+		break;
+	case 2:
+		usb_set(USB_OUT_INT_EP2, USB_OUT_INT_EN);
+		break;
+	case 3:
+		usb_set(USB_IN_INT_EP3, USB_IN_INT_EN);
+		break;
+	default:
+		DEBUG("Unknown endpoint: %d\n", ep);
+		break;
+	}
+}
+
+/** Disable EP interrupt */
+static void pio_irq_disable(int ep)
+{
+	DEBUG("%s: %d\n", __FUNCTION__, ep);
+
+	switch (ep) {
+	case 1:
+		usb_clear(USB_IN_INT_EP1, USB_IN_INT_EN);
+		break;
+	case 2:
+		usb_clear(USB_OUT_INT_EP2, USB_OUT_INT_EN);
+		break;
+	case 3:
+		usb_clear(USB_IN_INT_EP3, USB_IN_INT_EN);
+		break;
+	default:
+		DEBUG("Unknown endpoint: %d\n", ep);
+		break;
+	}
+}
+
+/*
+ * 	nuke - dequeue ALL requests
+ */
+void nuke(struct lh7a40x_ep *ep, int status)
+{
+	struct lh7a40x_request *req;
+
+	DEBUG("%s, %p\n", __FUNCTION__, ep);
+
+	/* Flush FIFO */
+	flush(ep);
+
+	/* called with irqs blocked */
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
+		done(ep, req, status);
+	}
+
+	/* Disable IRQ if EP is enabled (has decriptor) */
+	if (ep->desc)
+		pio_irq_disable(ep_index(ep));
+}
+
+/*
+void nuke_all(struct lh7a40x_udc *dev)
+{
+	int n;
+	for(n=0; n<UDC_MAX_ENDPOINTS; n++) {
+		struct lh7a40x_ep *ep = &dev->ep[n];
+		usb_set_index(n);
+		nuke(ep, 0);
+	}
+}*/
+
+/*
+static void flush_all(struct lh7a40x_udc *dev)
+{
+	int n;
+    for (n = 0; n < UDC_MAX_ENDPOINTS; n++)
+    {
+		struct lh7a40x_ep *ep = &dev->ep[n];
+		flush(ep);
+    }
+}
+*/
+
+/** Flush EP
+ * NOTE: INDEX register must be set before this call
+ */
+static void flush(struct lh7a40x_ep *ep)
+{
+	DEBUG("%s, %p\n", __FUNCTION__, ep);
+
+	switch (ep->ep_type) {
+	case ep_control:
+		/* check, by implication c.f. 15.1.2.11 */
+		break;
+
+	case ep_bulk_in:
+	case ep_interrupt:
+		/* if(csr & USB_IN_CSR1_IN_PKT_RDY) */
+		usb_set(USB_IN_CSR1_FIFO_FLUSH, ep->csr1);
+		break;
+
+	case ep_bulk_out:
+		/* if(csr & USB_OUT_CSR1_OUT_PKT_RDY) */
+		usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1);
+		break;
+	}
+}
+
+/**
+ * lh7a40x_in_epn - handle IN interrupt
+ */
+static void lh7a40x_in_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr)
+{
+	u32 csr;
+	struct lh7a40x_ep *ep = &dev->ep[ep_idx];
+	struct lh7a40x_request *req;
+
+	usb_set_index(ep_idx);
+
+	csr = usb_read(ep->csr1);
+	DEBUG("%s: %d, csr %x\n", __FUNCTION__, ep_idx, csr);
+
+	if (csr & USB_IN_CSR1_SENT_STALL) {
+		DEBUG("USB_IN_CSR1_SENT_STALL\n");
+		usb_set(USB_IN_CSR1_SENT_STALL /*|USB_IN_CSR1_SEND_STALL */ ,
+			ep->csr1);
+		return;
+	}
+
+	if (!ep->desc) {
+		DEBUG("%s: NO EP DESC\n", __FUNCTION__);
+		return;
+	}
+
+	if (list_empty(&ep->queue))
+		req = 0;
+	else
+		req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
+
+	DEBUG("req: %p\n", req);
+
+	if (!req)
+		return;
+
+	write_fifo(ep, req);
+}
+
+/* ********************************************************************************************* */
+/* Bulk OUT (recv)
+ */
+
+static void lh7a40x_out_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr)
+{
+	struct lh7a40x_ep *ep = &dev->ep[ep_idx];
+	struct lh7a40x_request *req;
+
+	DEBUG("%s: %d\n", __FUNCTION__, ep_idx);
+
+	usb_set_index(ep_idx);
+
+	if (ep->desc) {
+		u32 csr;
+		csr = usb_read(ep->csr1);
+
+		while ((csr =
+			usb_read(ep->
+				 csr1)) & (USB_OUT_CSR1_OUT_PKT_RDY |
+					   USB_OUT_CSR1_SENT_STALL)) {
+			DEBUG("%s: %x\n", __FUNCTION__, csr);
+
+			if (csr & USB_OUT_CSR1_SENT_STALL) {
+				DEBUG("%s: stall sent, flush fifo\n",
+				      __FUNCTION__);
+				/* usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); */
+				flush(ep);
+			} else if (csr & USB_OUT_CSR1_OUT_PKT_RDY) {
+				if (list_empty(&ep->queue))
+					req = 0;
+				else
+					req =
+					    list_entry(ep->queue.next,
+						       struct lh7a40x_request,
+						       queue);
+
+				if (!req) {
+					printk("%s: NULL REQ %d\n",
+					       __FUNCTION__, ep_idx);
+					flush(ep);
+					break;
+				} else {
+					read_fifo(ep, req);
+				}
+			}
+
+		}
+
+	} else {
+		/* Throw packet away.. */
+		printk("%s: No descriptor?!?\n", __FUNCTION__);
+		flush(ep);
+	}
+}
+
+static void stop_activity(struct lh7a40x_udc *dev,
+			  struct usb_gadget_driver *driver)
+{
+	int i;
+
+	/* don't disconnect drivers more than once */
+	if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+		driver = 0;
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+
+	/* prevent new request submissions, kill any outstanding requests  */
+	for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
+		struct lh7a40x_ep *ep = &dev->ep[i];
+		ep->stopped = 1;
+
+		usb_set_index(i);
+		nuke(ep, -ESHUTDOWN);
+	}
+
+	/* report disconnect; the driver is already quiesced */
+	if (driver) {
+		spin_unlock(&dev->lock);
+		driver->disconnect(&dev->gadget);
+		spin_lock(&dev->lock);
+	}
+
+	/* re-init driver-visible data structures */
+	udc_reinit(dev);
+}
+
+/** Handle USB RESET interrupt
+ */
+static void lh7a40x_reset_intr(struct lh7a40x_udc *dev)
+{
+#if 0				/* def CONFIG_ARCH_LH7A404 */
+	/* Does not work always... */
+
+	DEBUG("%s: %d\n", __FUNCTION__, dev->usb_address);
+
+	if (!dev->usb_address) {
+		/*usb_set(USB_RESET_IO, USB_RESET);
+		   mdelay(5);
+		   usb_clear(USB_RESET_IO, USB_RESET); */
+		return;
+	}
+	/* Put the USB controller into reset. */
+	usb_set(USB_RESET_IO, USB_RESET);
+
+	/* Set Device ID to 0 */
+	udc_set_address(dev, 0);
+
+	/* Let PLL2 settle down */
+	mdelay(5);
+
+	/* Release the USB controller from reset */
+	usb_clear(USB_RESET_IO, USB_RESET);
+
+	/* Re-enable UDC */
+	udc_enable(dev);
+
+#endif
+	dev->gadget.speed = USB_SPEED_FULL;
+}
+
+/*
+ *	lh7a40x usb client interrupt handler.
+ */
+static irqreturn_t lh7a40x_udc_irq(int irq, void *_dev, struct pt_regs *r)
+{
+	struct lh7a40x_udc *dev = _dev;
+
+	DEBUG("\n\n");
+
+	spin_lock(&dev->lock);
+
+	for (;;) {
+		u32 intr_in = usb_read(USB_IN_INT);
+		u32 intr_out = usb_read(USB_OUT_INT);
+		u32 intr_int = usb_read(USB_INT);
+
+		/* Test also against enable bits.. (lh7a40x errata).. Sigh.. */
+		u32 in_en = usb_read(USB_IN_INT_EN);
+		u32 out_en = usb_read(USB_OUT_INT_EN);
+
+		if (!intr_out && !intr_in && !intr_int)
+			break;
+
+		DEBUG("%s (on state %s)\n", __FUNCTION__,
+		      state_names[dev->ep0state]);
+		DEBUG("intr_out = %x\n", intr_out);
+		DEBUG("intr_in  = %x\n", intr_in);
+		DEBUG("intr_int = %x\n", intr_int);
+
+		if (intr_in) {
+			usb_write(intr_in, USB_IN_INT);
+
+			if ((intr_in & USB_IN_INT_EP1)
+			    && (in_en & USB_IN_INT_EP1)) {
+				DEBUG("USB_IN_INT_EP1\n");
+				lh7a40x_in_epn(dev, 1, intr_in);
+			}
+			if ((intr_in & USB_IN_INT_EP3)
+			    && (in_en & USB_IN_INT_EP3)) {
+				DEBUG("USB_IN_INT_EP3\n");
+				lh7a40x_in_epn(dev, 3, intr_in);
+			}
+			if (intr_in & USB_IN_INT_EP0) {
+				DEBUG("USB_IN_INT_EP0 (control)\n");
+				lh7a40x_handle_ep0(dev, intr_in);
+			}
+		}
+
+		if (intr_out) {
+			usb_write(intr_out, USB_OUT_INT);
+
+			if ((intr_out & USB_OUT_INT_EP2)
+			    && (out_en & USB_OUT_INT_EP2)) {
+				DEBUG("USB_OUT_INT_EP2\n");
+				lh7a40x_out_epn(dev, 2, intr_out);
+			}
+		}
+
+		if (intr_int) {
+			usb_write(intr_int, USB_INT);
+
+			if (intr_int & USB_INT_RESET_INT) {
+				lh7a40x_reset_intr(dev);
+			}
+
+			if (intr_int & USB_INT_RESUME_INT) {
+				DEBUG("USB resume\n");
+
+				if (dev->gadget.speed != USB_SPEED_UNKNOWN
+				    && dev->driver
+				    && dev->driver->resume
+				    && is_usb_connected()) {
+					dev->driver->resume(&dev->gadget);
+				}
+			}
+
+			if (intr_int & USB_INT_SUSPEND_INT) {
+				DEBUG("USB suspend%s\n",
+				      is_usb_connected()? "" : "+disconnect");
+				if (!is_usb_connected()) {
+					stop_activity(dev, dev->driver);
+				} else if (dev->gadget.speed !=
+					   USB_SPEED_UNKNOWN && dev->driver
+					   && dev->driver->suspend) {
+					dev->driver->suspend(&dev->gadget);
+				}
+			}
+
+		}
+	}
+
+	spin_unlock(&dev->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int lh7a40x_ep_enable(struct usb_ep *_ep,
+			     const struct usb_endpoint_descriptor *desc)
+{
+	struct lh7a40x_ep *ep;
+	struct lh7a40x_udc *dev;
+	unsigned long flags;
+
+	DEBUG("%s, %p\n", __FUNCTION__, _ep);
+
+	ep = container_of(_ep, struct lh7a40x_ep, ep);
+	if (!_ep || !desc || ep->desc || _ep->name == ep0name
+	    || desc->bDescriptorType != USB_DT_ENDPOINT
+	    || ep->bEndpointAddress != desc->bEndpointAddress
+	    || ep_maxpacket(ep) < le16_to_cpu(desc->wMaxPacketSize)) {
+		DEBUG("%s, bad ep or descriptor\n", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	/* xfer types must match, except that interrupt ~= bulk */
+	if (ep->bmAttributes != desc->bmAttributes
+	    && ep->bmAttributes != USB_ENDPOINT_XFER_BULK
+	    && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
+		DEBUG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
+		return -EINVAL;
+	}
+
+	/* hardware _could_ do smaller, but driver doesn't */
+	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
+	     && le16_to_cpu(desc->wMaxPacketSize) != ep_maxpacket(ep))
+	    || !desc->wMaxPacketSize) {
+		DEBUG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name);
+		return -ERANGE;
+	}
+
+	dev = ep->dev;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		DEBUG("%s, bogus device state\n", __FUNCTION__);
+		return -ESHUTDOWN;
+	}
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+
+	ep->stopped = 0;
+	ep->desc = desc;
+	ep->pio_irqs = 0;
+	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+
+	/* Reset halt state (does flush) */
+	lh7a40x_set_halt(_ep, 0);
+
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+
+	DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name);
+	return 0;
+}
+
+/** Disable EP
+ *  NOTE: Sets INDEX register
+ */
+static int lh7a40x_ep_disable(struct usb_ep *_ep)
+{
+	struct lh7a40x_ep *ep;
+	unsigned long flags;
+
+	DEBUG("%s, %p\n", __FUNCTION__, _ep);
+
+	ep = container_of(_ep, struct lh7a40x_ep, ep);
+	if (!_ep || !ep->desc) {
+		DEBUG("%s, %s not enabled\n", __FUNCTION__,
+		      _ep ? ep->ep.name : NULL);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+
+	usb_set_index(ep_index(ep));
+
+	/* Nuke all pending requests (does flush) */
+	nuke(ep, -ESHUTDOWN);
+
+	/* Disable ep IRQ */
+	pio_irq_disable(ep_index(ep));
+
+	ep->desc = 0;
+	ep->stopped = 1;
+
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+
+	DEBUG("%s: disabled %s\n", __FUNCTION__, _ep->name);
+	return 0;
+}
+
+static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep,
+						 int gfp_flags)
+{
+	struct lh7a40x_request *req;
+
+	DEBUG("%s, %p\n", __FUNCTION__, ep);
+
+	req = kmalloc(sizeof *req, gfp_flags);
+	if (!req)
+		return 0;
+
+	memset(req, 0, sizeof *req);
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *_req)
+{
+	struct lh7a40x_request *req;
+
+	DEBUG("%s, %p\n", __FUNCTION__, ep);
+
+	req = container_of(_req, struct lh7a40x_request, req);
+	WARN_ON(!list_empty(&req->queue));
+	kfree(req);
+}
+
+static void *lh7a40x_alloc_buffer(struct usb_ep *ep, unsigned bytes,
+				  dma_addr_t * dma, int gfp_flags)
+{
+	char *retval;
+
+	DEBUG("%s (%p, %d, %d)\n", __FUNCTION__, ep, bytes, gfp_flags);
+
+	retval = kmalloc(bytes, gfp_flags & ~(__GFP_DMA | __GFP_HIGHMEM));
+	if (retval)
+		*dma = virt_to_bus(retval);
+	return retval;
+}
+
+static void lh7a40x_free_buffer(struct usb_ep *ep, void *buf, dma_addr_t dma,
+				unsigned bytes)
+{
+	DEBUG("%s, %p\n", __FUNCTION__, ep);
+	kfree(buf);
+}
+
+/** Queue one request
+ *  Kickstart transfer if needed
+ *  NOTE: Sets INDEX register
+ */
+static int lh7a40x_queue(struct usb_ep *_ep, struct usb_request *_req,
+			 int gfp_flags)
+{
+	struct lh7a40x_request *req;
+	struct lh7a40x_ep *ep;
+	struct lh7a40x_udc *dev;
+	unsigned long flags;
+
+	DEBUG("\n\n\n%s, %p\n", __FUNCTION__, _ep);
+
+	req = container_of(_req, struct lh7a40x_request, req);
+	if (unlikely
+	    (!_req || !_req->complete || !_req->buf
+	     || !list_empty(&req->queue))) {
+		DEBUG("%s, bad params\n", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	ep = container_of(_ep, struct lh7a40x_ep, ep);
+	if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
+		DEBUG("%s, bad ep\n", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	dev = ep->dev;
+	if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
+		DEBUG("%s, bogus device state %p\n", __FUNCTION__, dev->driver);
+		return -ESHUTDOWN;
+	}
+
+	DEBUG("%s queue req %p, len %d buf %p\n", _ep->name, _req, _req->length,
+	      _req->buf);
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	/* kickstart this i/o queue? */
+	DEBUG("Add to %d Q %d %d\n", ep_index(ep), list_empty(&ep->queue),
+	      ep->stopped);
+	if (list_empty(&ep->queue) && likely(!ep->stopped)) {
+		u32 csr;
+
+		if (unlikely(ep_index(ep) == 0)) {
+			/* EP0 */
+			list_add_tail(&req->queue, &ep->queue);
+			lh7a40x_ep0_kick(dev, ep);
+			req = 0;
+		} else if (ep_is_in(ep)) {
+			/* EP1 & EP3 */
+			usb_set_index(ep_index(ep));
+			csr = usb_read(ep->csr1);
+			pio_irq_enable(ep_index(ep));
+			if ((csr & USB_IN_CSR1_FIFO_NOT_EMPTY) == 0) {
+				if (write_fifo(ep, req) == 1)
+					req = 0;
+			}
+		} else {
+			/* EP2 */
+			usb_set_index(ep_index(ep));
+			csr = usb_read(ep->csr1);
+			pio_irq_enable(ep_index(ep));
+			if (!(csr & USB_OUT_CSR1_FIFO_FULL)) {
+				if (read_fifo(ep, req) == 1)
+					req = 0;
+			}
+		}
+	}
+
+	/* pio or dma irq handler advances the queue. */
+	if (likely(req != 0))
+		list_add_tail(&req->queue, &ep->queue);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+/* dequeue JUST ONE request */
+static int lh7a40x_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct lh7a40x_ep *ep;
+	struct lh7a40x_request *req;
+	unsigned long flags;
+
+	DEBUG("%s, %p\n", __FUNCTION__, _ep);
+
+	ep = container_of(_ep, struct lh7a40x_ep, ep);
+	if (!_ep || ep->ep.name == ep0name)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == _req)
+			break;
+	}
+	if (&req->req != _req) {
+		spin_unlock_irqrestore(&ep->dev->lock, flags);
+		return -EINVAL;
+	}
+
+	done(ep, req, -ECONNRESET);
+
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+	return 0;
+}
+
+/** Halt specific EP
+ *  Return 0 if success
+ *  NOTE: Sets INDEX register to EP !
+ */
+static int lh7a40x_set_halt(struct usb_ep *_ep, int value)
+{
+	struct lh7a40x_ep *ep;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct lh7a40x_ep, ep);
+	if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
+		DEBUG("%s, bad ep\n", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	usb_set_index(ep_index(ep));
+
+	DEBUG("%s, ep %d, val %d\n", __FUNCTION__, ep_index(ep), value);
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+
+	if (ep_index(ep) == 0) {
+		/* EP0 */
+		usb_set(EP0_SEND_STALL, ep->csr1);
+	} else if (ep_is_in(ep)) {
+		u32 csr = usb_read(ep->csr1);
+		if (value && ((csr & USB_IN_CSR1_FIFO_NOT_EMPTY)
+			      || !list_empty(&ep->queue))) {
+			/*
+			 * Attempts to halt IN endpoints will fail (returning -EAGAIN)
+			 * if any transfer requests are still queued, or if the controller
+			 * FIFO still holds bytes that the host hasn’t collected.
+			 */
+			spin_unlock_irqrestore(&ep->dev->lock, flags);
+			DEBUG
+			    ("Attempt to halt IN endpoint failed (returning -EAGAIN) %d %d\n",
+			     (csr & USB_IN_CSR1_FIFO_NOT_EMPTY),
+			     !list_empty(&ep->queue));
+			return -EAGAIN;
+		}
+		flush(ep);
+		if (value)
+			usb_set(USB_IN_CSR1_SEND_STALL, ep->csr1);
+		else {
+			usb_clear(USB_IN_CSR1_SEND_STALL, ep->csr1);
+			usb_set(USB_IN_CSR1_CLR_DATA_TOGGLE, ep->csr1);
+		}
+
+	} else {
+
+		flush(ep);
+		if (value)
+			usb_set(USB_OUT_CSR1_SEND_STALL, ep->csr1);
+		else {
+			usb_clear(USB_OUT_CSR1_SEND_STALL, ep->csr1);
+			usb_set(USB_OUT_CSR1_CLR_DATA_REG, ep->csr1);
+		}
+	}
+
+	if (value) {
+		ep->stopped = 1;
+	} else {
+		ep->stopped = 0;
+	}
+
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+
+	DEBUG("%s %s halted\n", _ep->name, value == 0 ? "NOT" : "IS");
+
+	return 0;
+}
+
+/** Return bytes in EP FIFO
+ *  NOTE: Sets INDEX register to EP
+ */
+static int lh7a40x_fifo_status(struct usb_ep *_ep)
+{
+	u32 csr;
+	int count = 0;
+	struct lh7a40x_ep *ep;
+
+	ep = container_of(_ep, struct lh7a40x_ep, ep);
+	if (!_ep) {
+		DEBUG("%s, bad ep\n", __FUNCTION__);
+		return -ENODEV;
+	}
+
+	DEBUG("%s, %d\n", __FUNCTION__, ep_index(ep));
+
+	/* LPD can't report unclaimed bytes from IN fifos */
+	if (ep_is_in(ep))
+		return -EOPNOTSUPP;
+
+	usb_set_index(ep_index(ep));
+
+	csr = usb_read(ep->csr1);
+	if (ep->dev->gadget.speed != USB_SPEED_UNKNOWN ||
+	    csr & USB_OUT_CSR1_OUT_PKT_RDY) {
+		count = usb_read(USB_OUT_FIFO_WC1);
+	}
+
+	return count;
+}
+
+/** Flush EP FIFO
+ *  NOTE: Sets INDEX register to EP
+ */
+static void lh7a40x_fifo_flush(struct usb_ep *_ep)
+{
+	struct lh7a40x_ep *ep;
+
+	ep = container_of(_ep, struct lh7a40x_ep, ep);
+	if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
+		DEBUG("%s, bad ep\n", __FUNCTION__);
+		return;
+	}
+
+	usb_set_index(ep_index(ep));
+	flush(ep);
+}
+
+/****************************************************************/
+/* End Point 0 related functions                                */
+/****************************************************************/
+
+/* return:  0 = still running, 1 = completed, negative = errno */
+static int write_fifo_ep0(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
+{
+	u32 max;
+	unsigned count;
+	int is_last;
+
+	max = ep_maxpacket(ep);
+
+	DEBUG_EP0("%s\n", __FUNCTION__);
+
+	count = write_packet(ep, req, max);
+
+	/* last packet is usually short (or a zlp) */
+	if (unlikely(count != max))
+		is_last = 1;
+	else {
+		if (likely(req->req.length != req->req.actual) || req->req.zero)
+			is_last = 0;
+		else
+			is_last = 1;
+	}
+
+	DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __FUNCTION__,
+		  ep->ep.name, count,
+		  is_last ? "/L" : "", req->req.length - req->req.actual, req);
+
+	/* requests complete when all IN data is in the FIFO */
+	if (is_last) {
+		done(ep, req, 0);
+		return 1;
+	}
+
+	return 0;
+}
+
+static __inline__ int lh7a40x_fifo_read(struct lh7a40x_ep *ep,
+					unsigned char *cp, int max)
+{
+	int bytes;
+	int count = usb_read(USB_OUT_FIFO_WC1);
+	volatile u32 *fifo = (volatile u32 *)ep->fifo;
+
+	if (count > max)
+		count = max;
+	bytes = count;
+	while (count--)
+		*cp++ = *fifo & 0xFF;
+	return bytes;
+}
+
+static __inline__ void lh7a40x_fifo_write(struct lh7a40x_ep *ep,
+					  unsigned char *cp, int count)
+{
+	volatile u32 *fifo = (volatile u32 *)ep->fifo;
+	DEBUG_EP0("fifo_write: %d %d\n", ep_index(ep), count);
+	while (count--)
+		*fifo = *cp++;
+}
+
+static int read_fifo_ep0(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
+{
+	u32 csr;
+	u8 *buf;
+	unsigned bufferspace, count, is_short;
+	volatile u32 *fifo = (volatile u32 *)ep->fifo;
+
+	DEBUG_EP0("%s\n", __FUNCTION__);
+
+	csr = usb_read(USB_EP0_CSR);
+	if (!(csr & USB_OUT_CSR1_OUT_PKT_RDY))
+		return 0;
+
+	buf = req->req.buf + req->req.actual;
+	prefetchw(buf);
+	bufferspace = req->req.length - req->req.actual;
+
+	/* read all bytes from this packet */
+	if (likely(csr & EP0_OUT_PKT_RDY)) {
+		count = usb_read(USB_OUT_FIFO_WC1);
+		req->req.actual += min(count, bufferspace);
+	} else			/* zlp */
+		count = 0;
+
+	is_short = (count < ep->ep.maxpacket);
+	DEBUG_EP0("read %s %02x, %d bytes%s req %p %d/%d\n",
+		  ep->ep.name, csr, count,
+		  is_short ? "/S" : "", req, req->req.actual, req->req.length);
+
+	while (likely(count-- != 0)) {
+		u8 byte = (u8) (*fifo & 0xff);
+
+		if (unlikely(bufferspace == 0)) {
+			/* this happens when the driver's buffer
+			 * is smaller than what the host sent.
+			 * discard the extra data.
+			 */
+			if (req->req.status != -EOVERFLOW)
+				DEBUG_EP0("%s overflow %d\n", ep->ep.name,
+					  count);
+			req->req.status = -EOVERFLOW;
+		} else {
+			*buf++ = byte;
+			bufferspace--;
+		}
+	}
+
+	/* completion */
+	if (is_short || req->req.actual == req->req.length) {
+		done(ep, req, 0);
+		return 1;
+	}
+
+	/* finished that packet.  the next one may be waiting... */
+	return 0;
+}
+
+/**
+ * udc_set_address - set the USB address for this device
+ * @address:
+ *
+ * Called from control endpoint function after it decodes a set address setup packet.
+ */
+static void udc_set_address(struct lh7a40x_udc *dev, unsigned char address)
+{
+	DEBUG_EP0("%s: %d\n", __FUNCTION__, address);
+	/* c.f. 15.1.2.2 Table 15-4 address will be used after DATA_END is set */
+	dev->usb_address = address;
+	usb_set((address & USB_FA_FUNCTION_ADDR), USB_FA);
+	usb_set(USB_FA_ADDR_UPDATE | (address & USB_FA_FUNCTION_ADDR), USB_FA);
+	/* usb_read(USB_FA); */
+}
+
+/*
+ * DATA_STATE_RECV (OUT_PKT_RDY)
+ *      - if error
+ *              set EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL bits
+ *      - else
+ *              set EP0_CLR_OUT bit
+ 				if last set EP0_DATA_END bit
+ */
+static void lh7a40x_ep0_out(struct lh7a40x_udc *dev, u32 csr)
+{
+	struct lh7a40x_request *req;
+	struct lh7a40x_ep *ep = &dev->ep[0];
+	int ret;
+
+	DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
+
+	if (list_empty(&ep->queue))
+		req = 0;
+	else
+		req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
+
+	if (req) {
+
+		if (req->req.length == 0) {
+			DEBUG_EP0("ZERO LENGTH OUT!\n");
+			usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR);
+			dev->ep0state = WAIT_FOR_SETUP;
+			return;
+		}
+		ret = read_fifo_ep0(ep, req);
+		if (ret) {
+			/* Done! */
+			DEBUG_EP0("%s: finished, waiting for status\n",
+				  __FUNCTION__);
+
+			usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR);
+			dev->ep0state = WAIT_FOR_SETUP;
+		} else {
+			/* Not done yet.. */
+			DEBUG_EP0("%s: not finished\n", __FUNCTION__);
+			usb_set(EP0_CLR_OUT, USB_EP0_CSR);
+		}
+	} else {
+		DEBUG_EP0("NO REQ??!\n");
+	}
+}
+
+/*
+ * DATA_STATE_XMIT
+ */
+static int lh7a40x_ep0_in(struct lh7a40x_udc *dev, u32 csr)
+{
+	struct lh7a40x_request *req;
+	struct lh7a40x_ep *ep = &dev->ep[0];
+	int ret, need_zlp = 0;
+
+	DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
+
+	if (list_empty(&ep->queue))
+		req = 0;
+	else
+		req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
+
+	if (!req) {
+		DEBUG_EP0("%s: NULL REQ\n", __FUNCTION__);
+		return 0;
+	}
+
+	if (req->req.length == 0) {
+
+		usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
+		dev->ep0state = WAIT_FOR_SETUP;
+		return 1;
+	}
+
+	if (req->req.length - req->req.actual == EP0_PACKETSIZE) {
+		/* Next write will end with the packet size, */
+		/* so we need Zero-length-packet */
+		need_zlp = 1;
+	}
+
+	ret = write_fifo_ep0(ep, req);
+
+	if (ret == 1 && !need_zlp) {
+		/* Last packet */
+		DEBUG_EP0("%s: finished, waiting for status\n", __FUNCTION__);
+
+		usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
+		dev->ep0state = WAIT_FOR_SETUP;
+	} else {
+		DEBUG_EP0("%s: not finished\n", __FUNCTION__);
+		usb_set(EP0_IN_PKT_RDY, USB_EP0_CSR);
+	}
+
+	if (need_zlp) {
+		DEBUG_EP0("%s: Need ZLP!\n", __FUNCTION__);
+		usb_set(EP0_IN_PKT_RDY, USB_EP0_CSR);
+		dev->ep0state = DATA_STATE_NEED_ZLP;
+	}
+
+	return 1;
+}
+
+static int lh7a40x_handle_get_status(struct lh7a40x_udc *dev,
+				     struct usb_ctrlrequest *ctrl)
+{
+	struct lh7a40x_ep *ep0 = &dev->ep[0];
+	struct lh7a40x_ep *qep;
+	int reqtype = (ctrl->bRequestType & USB_RECIP_MASK);
+	u16 val = 0;
+
+	if (reqtype == USB_RECIP_INTERFACE) {
+		/* This is not supported.
+		 * And according to the USB spec, this one does nothing..
+		 * Just return 0
+		 */
+		DEBUG_SETUP("GET_STATUS: USB_RECIP_INTERFACE\n");
+	} else if (reqtype == USB_RECIP_DEVICE) {
+		DEBUG_SETUP("GET_STATUS: USB_RECIP_DEVICE\n");
+		val |= (1 << 0);	/* Self powered */
+		/*val |= (1<<1); *//* Remote wakeup */
+	} else if (reqtype == USB_RECIP_ENDPOINT) {
+		int ep_num = (ctrl->wIndex & ~USB_DIR_IN);
+
+		DEBUG_SETUP
+		    ("GET_STATUS: USB_RECIP_ENDPOINT (%d), ctrl->wLength = %d\n",
+		     ep_num, ctrl->wLength);
+
+		if (ctrl->wLength > 2 || ep_num > 3)
+			return -EOPNOTSUPP;
+
+		qep = &dev->ep[ep_num];
+		if (ep_is_in(qep) != ((ctrl->wIndex & USB_DIR_IN) ? 1 : 0)
+		    && ep_index(qep) != 0) {
+			return -EOPNOTSUPP;
+		}
+
+		usb_set_index(ep_index(qep));
+
+		/* Return status on next IN token */
+		switch (qep->ep_type) {
+		case ep_control:
+			val =
+			    (usb_read(qep->csr1) & EP0_SEND_STALL) ==
+			    EP0_SEND_STALL;
+			break;
+		case ep_bulk_in:
+		case ep_interrupt:
+			val =
+			    (usb_read(qep->csr1) & USB_IN_CSR1_SEND_STALL) ==
+			    USB_IN_CSR1_SEND_STALL;
+			break;
+		case ep_bulk_out:
+			val =
+			    (usb_read(qep->csr1) & USB_OUT_CSR1_SEND_STALL) ==
+			    USB_OUT_CSR1_SEND_STALL;
+			break;
+		}
+
+		/* Back to EP0 index */
+		usb_set_index(0);
+
+		DEBUG_SETUP("GET_STATUS, ep: %d (%x), val = %d\n", ep_num,
+			    ctrl->wIndex, val);
+	} else {
+		DEBUG_SETUP("Unknown REQ TYPE: %d\n", reqtype);
+		return -EOPNOTSUPP;
+	}
+
+	/* Clear "out packet ready" */
+	usb_set((EP0_CLR_OUT), USB_EP0_CSR);
+	/* Put status to FIFO */
+	lh7a40x_fifo_write(ep0, (u8 *) & val, sizeof(val));
+	/* Issue "In packet ready" */
+	usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
+
+	return 0;
+}
+
+/*
+ * WAIT_FOR_SETUP (OUT_PKT_RDY)
+ *      - read data packet from EP0 FIFO
+ *      - decode command
+ *      - if error
+ *              set EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL bits
+ *      - else
+ *              set EP0_CLR_OUT | EP0_DATA_END bits
+ */
+static void lh7a40x_ep0_setup(struct lh7a40x_udc *dev, u32 csr)
+{
+	struct lh7a40x_ep *ep = &dev->ep[0];
+	struct usb_ctrlrequest ctrl;
+	int i, bytes, is_in;
+
+	DEBUG_SETUP("%s: %x\n", __FUNCTION__, csr);
+
+	/* Nuke all previous transfers */
+	nuke(ep, -EPROTO);
+
+	/* read control req from fifo (8 bytes) */
+	bytes = lh7a40x_fifo_read(ep, (unsigned char *)&ctrl, 8);
+
+	DEBUG_SETUP("Read CTRL REQ %d bytes\n", bytes);
+	DEBUG_SETUP("CTRL.bRequestType = %d (is_in %d)\n", ctrl.bRequestType,
+		    ctrl.bRequestType == USB_DIR_IN);
+	DEBUG_SETUP("CTRL.bRequest = %d\n", ctrl.bRequest);
+	DEBUG_SETUP("CTRL.wLength = %d\n", ctrl.wLength);
+	DEBUG_SETUP("CTRL.wValue = %d (%d)\n", ctrl.wValue, ctrl.wValue >> 8);
+	DEBUG_SETUP("CTRL.wIndex = %d\n", ctrl.wIndex);
+
+	/* Set direction of EP0 */
+	if (likely(ctrl.bRequestType & USB_DIR_IN)) {
+		ep->bEndpointAddress |= USB_DIR_IN;
+		is_in = 1;
+	} else {
+		ep->bEndpointAddress &= ~USB_DIR_IN;
+		is_in = 0;
+	}
+
+	dev->req_pending = 1;
+
+	/* Handle some SETUP packets ourselves */
+	switch (ctrl.bRequest) {
+	case USB_REQ_SET_ADDRESS:
+		if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
+			break;
+
+		DEBUG_SETUP("USB_REQ_SET_ADDRESS (%d)\n", ctrl.wValue);
+		udc_set_address(dev, ctrl.wValue);
+		usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR);
+		return;
+
+	case USB_REQ_GET_STATUS:{
+			if (lh7a40x_handle_get_status(dev, &ctrl) == 0)
+				return;
+
+	case USB_REQ_CLEAR_FEATURE:
+	case USB_REQ_SET_FEATURE:
+			if (ctrl.bRequestType == USB_RECIP_ENDPOINT) {
+				struct lh7a40x_ep *qep;
+				int ep_num = (ctrl.wIndex & 0x0f);
+
+				/* Support only HALT feature */
+				if (ctrl.wValue != 0 || ctrl.wLength != 0
+				    || ep_num > 3 || ep_num < 1)
+					break;
+
+				qep = &dev->ep[ep_num];
+				if (ctrl.bRequest == USB_REQ_SET_FEATURE) {
+					DEBUG_SETUP("SET_FEATURE (%d)\n",
+						    ep_num);
+					lh7a40x_set_halt(&qep->ep, 1);
+				} else {
+					DEBUG_SETUP("CLR_FEATURE (%d)\n",
+						    ep_num);
+					lh7a40x_set_halt(&qep->ep, 0);
+				}
+				usb_set_index(0);
+
+				/* Reply with a ZLP on next IN token */
+				usb_set((EP0_CLR_OUT | EP0_DATA_END),
+					USB_EP0_CSR);
+				return;
+			}
+			break;
+		}
+
+	default:
+		break;
+	}
+
+	if (likely(dev->driver)) {
+		/* device-2-host (IN) or no data setup command, process immediately */
+		spin_unlock(&dev->lock);
+		i = dev->driver->setup(&dev->gadget, &ctrl);
+		spin_lock(&dev->lock);
+
+		if (i < 0) {
+			/* setup processing failed, force stall */
+			DEBUG_SETUP
+			    ("  --> ERROR: gadget setup FAILED (stalling), setup returned %d\n",
+			     i);
+			usb_set_index(0);
+			usb_set((EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL),
+				USB_EP0_CSR);
+
+			/* ep->stopped = 1; */
+			dev->ep0state = WAIT_FOR_SETUP;
+		}
+	}
+}
+
+/*
+ * DATA_STATE_NEED_ZLP
+ */
+static void lh7a40x_ep0_in_zlp(struct lh7a40x_udc *dev, u32 csr)
+{
+	DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
+
+	/* c.f. Table 15-14 */
+	usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
+	dev->ep0state = WAIT_FOR_SETUP;
+}
+
+/*
+ * handle ep0 interrupt
+ */
+static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr)
+{
+	struct lh7a40x_ep *ep = &dev->ep[0];
+	u32 csr;
+
+	/* Set index 0 */
+	usb_set_index(0);
+ 	csr = usb_read(USB_EP0_CSR);
+
+	DEBUG_EP0("%s: csr = %x\n", __FUNCTION__, csr);
+
+	/*
+	 * For overview of what we should be doing see c.f. Chapter 18.1.2.4
+	 * We will follow that outline here modified by our own global state
+	 * indication which provides hints as to what we think should be
+	 * happening..
+	 */
+
+	/*
+	 * if SENT_STALL is set
+	 *      - clear the SENT_STALL bit
+	 */
+	if (csr & EP0_SENT_STALL) {
+		DEBUG_EP0("%s: EP0_SENT_STALL is set: %x\n", __FUNCTION__, csr);
+		usb_clear((EP0_SENT_STALL | EP0_SEND_STALL), USB_EP0_CSR);
+		nuke(ep, -ECONNABORTED);
+		dev->ep0state = WAIT_FOR_SETUP;
+		return;
+	}
+
+	/*
+	 * if a transfer is in progress && IN_PKT_RDY and OUT_PKT_RDY are clear
+	 *      - fill EP0 FIFO
+	 *      - if last packet
+	 *      -       set IN_PKT_RDY | DATA_END
+	 *      - else
+	 *              set IN_PKT_RDY
+	 */
+	if (!(csr & (EP0_IN_PKT_RDY | EP0_OUT_PKT_RDY))) {
+		DEBUG_EP0("%s: IN_PKT_RDY and OUT_PKT_RDY are clear\n",
+			  __FUNCTION__);
+
+		switch (dev->ep0state) {
+		case DATA_STATE_XMIT:
+			DEBUG_EP0("continue with DATA_STATE_XMIT\n");
+			lh7a40x_ep0_in(dev, csr);
+			return;
+		case DATA_STATE_NEED_ZLP:
+			DEBUG_EP0("continue with DATA_STATE_NEED_ZLP\n");
+			lh7a40x_ep0_in_zlp(dev, csr);
+			return;
+		default:
+			/* Stall? */
+			DEBUG_EP0("Odd state!! state = %s\n",
+				  state_names[dev->ep0state]);
+			dev->ep0state = WAIT_FOR_SETUP;
+			/* nuke(ep, 0); */
+			/* usb_set(EP0_SEND_STALL, ep->csr1); */
+			break;
+		}
+	}
+
+	/*
+	 * if SETUP_END is set
+	 *      - abort the last transfer
+	 *      - set SERVICED_SETUP_END_BIT
+	 */
+	if (csr & EP0_SETUP_END) {
+		DEBUG_EP0("%s: EP0_SETUP_END is set: %x\n", __FUNCTION__, csr);
+
+		usb_set(EP0_CLR_SETUP_END, USB_EP0_CSR);
+
+		nuke(ep, 0);
+		dev->ep0state = WAIT_FOR_SETUP;
+	}
+
+	/*
+	 * if EP0_OUT_PKT_RDY is set
+	 *      - read data packet from EP0 FIFO
+	 *      - decode command
+	 *      - if error
+	 *              set SERVICED_OUT_PKT_RDY | DATA_END bits | SEND_STALL
+	 *      - else
+	 *              set SERVICED_OUT_PKT_RDY | DATA_END bits
+	 */
+	if (csr & EP0_OUT_PKT_RDY) {
+
+		DEBUG_EP0("%s: EP0_OUT_PKT_RDY is set: %x\n", __FUNCTION__,
+			  csr);
+
+		switch (dev->ep0state) {
+		case WAIT_FOR_SETUP:
+			DEBUG_EP0("WAIT_FOR_SETUP\n");
+			lh7a40x_ep0_setup(dev, csr);
+			break;
+
+		case DATA_STATE_RECV:
+			DEBUG_EP0("DATA_STATE_RECV\n");
+			lh7a40x_ep0_out(dev, csr);
+			break;
+
+		default:
+			/* send stall? */
+			DEBUG_EP0("strange state!! 2. send stall? state = %d\n",
+				  dev->ep0state);
+			break;
+		}
+	}
+}
+
+static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep)
+{
+	u32 csr;
+
+	usb_set_index(0);
+	csr = usb_read(USB_EP0_CSR);
+
+	DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
+
+	/* Clear "out packet ready" */
+	usb_set(EP0_CLR_OUT, USB_EP0_CSR);
+
+	if (ep_is_in(ep)) {
+		dev->ep0state = DATA_STATE_XMIT;
+		lh7a40x_ep0_in(dev, csr);
+	} else {
+		dev->ep0state = DATA_STATE_RECV;
+		lh7a40x_ep0_out(dev, csr);
+	}
+}
+
+/* ---------------------------------------------------------------------------
+ * 	device-scoped parts of the api to the usb controller hardware
+ * ---------------------------------------------------------------------------
+ */
+
+static int lh7a40x_udc_get_frame(struct usb_gadget *_gadget)
+{
+	u32 frame1 = usb_read(USB_FRM_NUM1);	/* Least significant 8 bits */
+	u32 frame2 = usb_read(USB_FRM_NUM2);	/* Most significant 3 bits */
+	DEBUG("%s, %p\n", __FUNCTION__, _gadget);
+	return ((frame2 & 0x07) << 8) | (frame1 & 0xff);
+}
+
+static int lh7a40x_udc_wakeup(struct usb_gadget *_gadget)
+{
+	/* host may not have enabled remote wakeup */
+	/*if ((UDCCS0 & UDCCS0_DRWF) == 0)
+	   return -EHOSTUNREACH;
+	   udc_set_mask_UDCCR(UDCCR_RSM); */
+	return -ENOTSUPP;
+}
+
+static const struct usb_gadget_ops lh7a40x_udc_ops = {
+	.get_frame = lh7a40x_udc_get_frame,
+	.wakeup = lh7a40x_udc_wakeup,
+	/* current versions must always be self-powered */
+};
+
+static void nop_release(struct device *dev)
+{
+	DEBUG("%s %s\n", __FUNCTION__, dev->bus_id);
+}
+
+static struct lh7a40x_udc memory = {
+	.usb_address = 0,
+
+	.gadget = {
+		   .ops = &lh7a40x_udc_ops,
+		   .ep0 = &memory.ep[0].ep,
+		   .name = driver_name,
+		   .dev = {
+			   .bus_id = "gadget",
+			   .release = nop_release,
+			   },
+		   },
+
+	/* control endpoint */
+	.ep[0] = {
+		  .ep = {
+			 .name = ep0name,
+			 .ops = &lh7a40x_ep_ops,
+			 .maxpacket = EP0_PACKETSIZE,
+			 },
+		  .dev = &memory,
+
+		  .bEndpointAddress = 0,
+		  .bmAttributes = 0,
+
+		  .ep_type = ep_control,
+		  .fifo = io_p2v(USB_EP0_FIFO),
+		  .csr1 = USB_EP0_CSR,
+		  .csr2 = USB_EP0_CSR,
+		  },
+
+	/* first group of endpoints */
+	.ep[1] = {
+		  .ep = {
+			 .name = "ep1in-bulk",
+			 .ops = &lh7a40x_ep_ops,
+			 .maxpacket = 64,
+			 },
+		  .dev = &memory,
+
+		  .bEndpointAddress = USB_DIR_IN | 1,
+		  .bmAttributes = USB_ENDPOINT_XFER_BULK,
+
+		  .ep_type = ep_bulk_in,
+		  .fifo = io_p2v(USB_EP1_FIFO),
+		  .csr1 = USB_IN_CSR1,
+		  .csr2 = USB_IN_CSR2,
+		  },
+
+	.ep[2] = {
+		  .ep = {
+			 .name = "ep2out-bulk",
+			 .ops = &lh7a40x_ep_ops,
+			 .maxpacket = 64,
+			 },
+		  .dev = &memory,
+
+		  .bEndpointAddress = 2,
+		  .bmAttributes = USB_ENDPOINT_XFER_BULK,
+
+		  .ep_type = ep_bulk_out,
+		  .fifo = io_p2v(USB_EP2_FIFO),
+		  .csr1 = USB_OUT_CSR1,
+		  .csr2 = USB_OUT_CSR2,
+		  },
+
+	.ep[3] = {
+		  .ep = {
+			 .name = "ep3in-int",
+			 .ops = &lh7a40x_ep_ops,
+			 .maxpacket = 64,
+			 },
+		  .dev = &memory,
+
+		  .bEndpointAddress = USB_DIR_IN | 3,
+		  .bmAttributes = USB_ENDPOINT_XFER_INT,
+
+		  .ep_type = ep_interrupt,
+		  .fifo = io_p2v(USB_EP3_FIFO),
+		  .csr1 = USB_IN_CSR1,
+		  .csr2 = USB_IN_CSR2,
+		  },
+};
+
+/*
+ * 	probe - binds to the platform device
+ */
+static int lh7a40x_udc_probe(struct device *_dev)
+{
+	struct lh7a40x_udc *dev = &memory;
+	int retval;
+
+	DEBUG("%s: %p\n", __FUNCTION__, _dev);
+
+	spin_lock_init(&dev->lock);
+	dev->dev = _dev;
+
+	device_initialize(&dev->gadget.dev);
+	dev->gadget.dev.parent = _dev;
+
+	the_controller = dev;
+	dev_set_drvdata(_dev, dev);
+
+	udc_disable(dev);
+	udc_reinit(dev);
+
+	/* irq setup after old hardware state is cleaned up */
+	retval =
+	    request_irq(IRQ_USBINTR, lh7a40x_udc_irq, SA_INTERRUPT, driver_name,
+			dev);
+	if (retval != 0) {
+		DEBUG(KERN_ERR "%s: can't get irq %i, err %d\n", driver_name,
+		      IRQ_USBINTR, retval);
+		return -EBUSY;
+	}
+
+	create_proc_files();
+
+	return retval;
+}
+
+static int lh7a40x_udc_remove(struct device *_dev)
+{
+	struct lh7a40x_udc *dev = _dev->driver_data;
+
+	DEBUG("%s: %p\n", __FUNCTION__, dev);
+
+	udc_disable(dev);
+	remove_proc_files();
+	usb_gadget_unregister_driver(dev->driver);
+
+	free_irq(IRQ_USBINTR, dev);
+
+	dev_set_drvdata(_dev, 0);
+
+	the_controller = 0;
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct device_driver udc_driver = {
+	.name = (char *)driver_name,
+	.bus = &platform_bus_type,
+	.probe = lh7a40x_udc_probe,
+	.remove = lh7a40x_udc_remove
+	    /* FIXME power management support */
+	    /* .suspend = ... disable UDC */
+	    /* .resume = ... re-enable UDC */
+};
+
+static int __init udc_init(void)
+{
+	DEBUG("%s: %s version %s\n", __FUNCTION__, driver_name, DRIVER_VERSION);
+	return driver_register(&udc_driver);
+}
+
+static void __exit udc_exit(void)
+{
+	driver_unregister(&udc_driver);
+}
+
+module_init(udc_init);
+module_exit(udc_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Mikko Lahteenmaki, Bo Henriksen");
+MODULE_LICENSE("GPL");