USB: add ehci-ppc-of bus glue (device-tree aware)

This adds device-tree-aware ehci-ppc-of driver.
The code is based on the ehci-ppc-soc driver by
Stefan Roese <sr@denx.de>.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 238 insertions, 0 deletions

diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
new file mode 100644
index 000000000000..ee305b1f99ff
--- /dev/null
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -0,0 +1,238 @@
+/*
+ * EHCI HCD (Host Controller Driver) for USB.
+ *
+ * Bus Glue for PPC On-Chip EHCI driver on the of_platform bus
+ * Tested on AMCC PPC 440EPx
+ *
+ * Valentine Barshak <vbarshak@ru.mvista.com>
+ *
+ * Based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de>
+ * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com>
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/signal.h>
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+/* called during probe() after chip reset completes */
+static int ehci_ppc_of_setup(struct usb_hcd *hcd)
+{
+	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
+	int		retval;
+
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	ehci->sbrn = 0x20;
+	return ehci_reset(ehci);
+}
+
+
+static const struct hc_driver ehci_ppc_of_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "OF EHCI",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset			= ehci_ppc_of_setup,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+#endif
+};
+
+
+/*
+ * 440EPx Errata USBH_3
+ * Fix: Enable Break Memory Transfer (BMT) in INSNREG3
+ */
+#define PPC440EPX_EHCI0_INSREG_BMT	(0x1 << 0)
+static int __devinit
+ppc44x_enable_bmt(struct device_node *dn)
+{
+	__iomem u32 *insreg_virt;
+
+	insreg_virt = of_iomap(dn, 1);
+	if (!insreg_virt)
+		return  -EINVAL;
+
+	out_be32(insreg_virt + 3, PPC440EPX_EHCI0_INSREG_BMT);
+
+	iounmap(insreg_virt);
+	return 0;
+}
+
+
+static int __devinit
+ehci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
+{
+	struct device_node *dn = op->node;
+	struct usb_hcd *hcd;
+	struct ehci_hcd	*ehci;
+	struct resource res;
+	int irq;
+	int rv;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
+
+	rv = of_address_to_resource(dn, 0, &res);
+	if (rv)
+		return rv;
+
+	hcd = usb_create_hcd(&ehci_ppc_of_hc_driver, &op->dev, "PPC-OF USB");
+	if (!hcd)
+		return -ENOMEM;
+
+	hcd->rsrc_start = res.start;
+	hcd->rsrc_len = res.end - res.start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		printk(KERN_ERR __FILE__ ": request_mem_region failed\n");
+		rv = -EBUSY;
+		goto err_rmr;
+	}
+
+	irq = irq_of_parse_and_map(dn, 0);
+	if (irq == NO_IRQ) {
+		printk(KERN_ERR __FILE__ ": irq_of_parse_and_map failed\n");
+		rv = -EBUSY;
+		goto err_irq;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		printk(KERN_ERR __FILE__ ": ioremap failed\n");
+		rv = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	ehci = hcd_to_ehci(hcd);
+
+	if (of_get_property(dn, "big-endian", NULL)) {
+		ehci->big_endian_mmio = 1;
+		ehci->big_endian_desc = 1;
+	}
+	if (of_get_property(dn, "big-endian-regs", NULL))
+		ehci->big_endian_mmio = 1;
+	if (of_get_property(dn, "big-endian-desc", NULL))
+		ehci->big_endian_desc = 1;
+
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs +
+			HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	if (of_device_is_compatible(dn, "ibm,usb-ehci-440epx")) {
+		rv = ppc44x_enable_bmt(dn);
+		ehci_dbg(ehci, "Break Memory Transfer (BMT) is %senabled!\n",
+				rv ? "NOT ": "");
+	}
+
+	rv = usb_add_hcd(hcd, irq, 0);
+	if (rv == 0)
+		return 0;
+
+	iounmap(hcd->regs);
+err_ioremap:
+	irq_dispose_mapping(irq);
+err_irq:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err_rmr:
+	usb_put_hcd(hcd);
+
+	return rv;
+}
+
+
+static int ehci_hcd_ppc_of_remove(struct of_device *op)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+	dev_set_drvdata(&op->dev, NULL);
+
+	dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
+
+	usb_remove_hcd(hcd);
+
+	iounmap(hcd->regs);
+	irq_dispose_mapping(hcd->irq);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+
+static int ehci_hcd_ppc_of_shutdown(struct of_device *op)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
+
+	return 0;
+}
+
+
+static struct of_device_id ehci_hcd_ppc_of_match[] = {
+	{
+		.compatible = "usb-ehci",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ehci_hcd_ppc_of_match);
+
+
+static struct of_platform_driver ehci_hcd_ppc_of_driver = {
+	.name		= "ppc-of-ehci",
+	.match_table	= ehci_hcd_ppc_of_match,
+	.probe		= ehci_hcd_ppc_of_probe,
+	.remove		= ehci_hcd_ppc_of_remove,
+	.shutdown	= ehci_hcd_ppc_of_shutdown,
+	.driver		= {
+		.name	= "ppc-of-ehci",
+		.owner	= THIS_MODULE,
+	},
+};