USB: EHCI: use hrtimer for async schedule

This patch (as1576) adds hrtimer support for managing ehci-hcd's
async schedule.  Just as with the earlier change to the periodic
schedule management, two new hrtimer events take care of everything.

One event polls at 1-ms intervals to see when the Asynchronous
Schedule Status (ASS) flag matches the Asynchronous Schedule Enable
(ASE) value; the schedule's state must not be changed until it does.
The other event delays for 15 ms after the async schedule becomes
empty before turning it off.

The new events replace a busy-wait poll and a kernel timer usage.
They also replace the rather illogical method currently used for
indicating the async schedule should be turned off: attempting to
unlink the dedicated QH at the head of the async list.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 49 insertions, 0 deletions

diff --git a/drivers/usb/host/ehci-timer.c b/drivers/usb/host/ehci-timer.c
index ecd3296157c6..1e907dd3bb1b 100644
--- a/drivers/usb/host/ehci-timer.c
+++ b/drivers/usb/host/ehci-timer.c
@@ -67,8 +67,10 @@ static void ehci_clear_command_bit(struct ehci_hcd *ehci, u32 bit)
  * the event types indexed by enum ehci_hrtimer_event in ehci.h.
  */
 static unsigned event_delays_ns[] = {
+	1 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_POLL_ASS */
 	1 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_POLL_PSS */
 	10 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_DISABLE_PERIODIC */
+	15 * NSEC_PER_MSEC,	/* EHCI_HRTIMER_DISABLE_ASYNC */
 };
 
 /* Enable a pending hrtimer event */
@@ -91,6 +93,51 @@ static void ehci_enable_event(struct ehci_hcd *ehci, unsigned event,
 }
 
 
+/* Poll the STS_ASS status bit; see when it agrees with CMD_ASE */
+static void ehci_poll_ASS(struct ehci_hcd *ehci)
+{
+	unsigned	actual, want;
+
+	/* Don't enable anything if the controller isn't running (e.g., died) */
+	if (ehci->rh_state != EHCI_RH_RUNNING)
+		return;
+
+	want = (ehci->command & CMD_ASE) ? STS_ASS : 0;
+	actual = ehci_readl(ehci, &ehci->regs->status) & STS_ASS;
+
+	if (want != actual) {
+
+		/* Poll again later, but give up after about 20 ms */
+		if (ehci->ASS_poll_count++ < 20) {
+			ehci_enable_event(ehci, EHCI_HRTIMER_POLL_ASS, true);
+			return;
+		}
+		ehci_warn(ehci, "Waited too long for the async schedule status, giving up\n");
+	}
+	ehci->ASS_poll_count = 0;
+
+	/* The status is up-to-date; restart or stop the schedule as needed */
+	if (want == 0) {	/* Stopped */
+		if (ehci->async_count > 0)
+			ehci_set_command_bit(ehci, CMD_ASE);
+
+	} else {		/* Running */
+		if (ehci->async_count == 0) {
+
+			/* Turn off the schedule after a while */
+			ehci_enable_event(ehci, EHCI_HRTIMER_DISABLE_ASYNC,
+					true);
+		}
+	}
+}
+
+/* Turn off the async schedule after a brief delay */
+static void ehci_disable_ASE(struct ehci_hcd *ehci)
+{
+	ehci_clear_command_bit(ehci, CMD_ASE);
+}
+
+
 /* Poll the STS_PSS status bit; see when it agrees with CMD_PSE */
 static void ehci_poll_PSS(struct ehci_hcd *ehci)
 {
@@ -151,8 +198,10 @@ static void ehci_disable_PSE(struct ehci_hcd *ehci)
  * enum ehci_hrtimer_event in ehci.h.
  */
 static void (*event_handlers[])(struct ehci_hcd *) = {
+	ehci_poll_ASS,			/* EHCI_HRTIMER_POLL_ASS */
 	ehci_poll_PSS,			/* EHCI_HRTIMER_POLL_PSS */
 	ehci_disable_PSE,		/* EHCI_HRTIMER_DISABLE_PERIODIC */
+	ehci_disable_ASE,		/* EHCI_HRTIMER_DISABLE_ASYNC */
 };
 
 static enum hrtimer_restart ehci_hrtimer_func(struct hrtimer *t)