USB: UHCI: Support non-PCI host controllers

This patch is part of a series that extend the UHCI HCD to support
non-PCI host controllers.

This patch also extends the uhci_{read,write}* functions to allow accesses
to registers not mapped into PCI I/O space. This extension also includes
the addition of a void __iomem pointer to the uhci structure.

A new Kconfig option is added to signal that the system has a non-PCI HC.
If this Kconfig option is set, uhci-hcd.c will include generic reset functions
for systems that do not make use of keyboard and mouse legacy support. PCI
controllers will still always use the reset functions from pci-quirks

This patch is followed by a patch that adds bus glue for the first non-PCI
UHCI HC.

Signed-off-by: Jan Andersson <jan@gaisler.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 65 insertions, 0 deletions

diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index a6de241bf966..a4e64d08f020 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -380,6 +380,9 @@ struct uhci_hcd {
 	/* Grabbed from PCI */
 	unsigned long io_addr;
 
+	/* Used when registers are memory mapped */
+	void __iomem *regs;
+
 	struct dma_pool *qh_pool;
 	struct dma_pool *td_pool;
 
@@ -481,6 +484,14 @@ struct urb_priv {
 #define PCI_VENDOR_ID_GENESYS		0x17a0
 #define PCI_DEVICE_ID_GL880S_UHCI	0x8083
 
+/*
+ * Functions used to access controller registers. The UCHI spec says that host
+ * controller I/O registers are mapped into PCI I/O space. For non-PCI hosts
+ * we use memory mapped registers.
+ */
+
+#if !defined(CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC)
+/* Support PCI only */
 static inline u32 uhci_readl(struct uhci_hcd *uhci, int reg)
 {
 	return inl(uhci->io_addr + reg);
@@ -511,4 +522,58 @@ static inline void uhci_writeb(struct uhci_hcd *uhci, u8 val, int reg)
 	outb(val, uhci->io_addr + reg);
 }
 
+#else
+/* Support PCI and non-PCI host controllers */
+
+#define uhci_has_pci_registers(u)	((u)->io_addr != 0)
+
+static inline u32 uhci_readl(struct uhci_hcd *uhci, int reg)
+{
+	if (uhci_has_pci_registers(uhci))
+		return inl(uhci->io_addr + reg);
+	else
+		return readl(uhci->regs + reg);
+}
+
+static inline void uhci_writel(struct uhci_hcd *uhci, u32 val, int reg)
+{
+	if (uhci_has_pci_registers(uhci))
+		outl(val, uhci->io_addr + reg);
+	else
+		writel(val, uhci->regs + reg);
+}
+
+static inline u16 uhci_readw(struct uhci_hcd *uhci, int reg)
+{
+	if (uhci_has_pci_registers(uhci))
+		return inw(uhci->io_addr + reg);
+	else
+		return readw(uhci->regs + reg);
+}
+
+static inline void uhci_writew(struct uhci_hcd *uhci, u16 val, int reg)
+{
+	if (uhci_has_pci_registers(uhci))
+		outw(val, uhci->io_addr + reg);
+	else
+		writew(val, uhci->regs + reg);
+}
+
+static inline u8 uhci_readb(struct uhci_hcd *uhci, int reg)
+{
+	if (uhci_has_pci_registers(uhci))
+		return inb(uhci->io_addr + reg);
+	else
+		return readb(uhci->regs + reg);
+}
+
+static inline void uhci_writeb(struct uhci_hcd *uhci, u8 val, int reg)
+{
+	if (uhci_has_pci_registers(uhci))
+		outb(val, uhci->io_addr + reg);
+	else
+		writeb(val, uhci->regs + reg);
+}
+#endif /* !defined(CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC) */
+
 #endif