Merge tag 'omap-for-v4.1/wl12xx-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "wireless wl12xx and omap device tree changes for v4.1" from Tony
Lindgren:

Wireless and omap changes to make wl12xx driver to use device tree
data instead of platform data from Eliad Peller <eliad@wizery.com>:

- Add device-tree support to the wlcore (wl12xx/wl18xx) driver.

- Update the current users to use the bindings instead of pdata-quirks.

- Finally, remove the deprecated wl12xx_platform_data struct

Note that da850 board file code that still uses the platform data,
but we have da850.dtsi that can be used instead. So it was decided
that we should try to remove the wl12xx support from the da850
board file as suggested by Sekhar Nori <nsekhar@ti.com>. As it's
the last patch in the series, the last patch can be simply reverted
if needed.

As this series touches quite a bit of arch code, it was suggested
by Kalle Valo <kvalo@codeaurora.org> that the whole series should
be merged via the arm-soc tree.

* tag 'omap-for-v4.1/wl12xx-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  wlcore: remove wl12xx_platform_data
  ARM: dts: add wl12xx/wl18xx bindings
  wlcore: add device-tree support
  dt: bindings: add TI's wilink wireless device
  wl12xx: use frequency instead of enumerations for pdata clocks
  wlcore: set irq_trigger in board files instead of hiding behind a quirk
  + Linux 4.0-rc4

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 30 insertions, 0 deletions

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 7f76c8a12f89..fd53c9ebd662 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -37,6 +37,9 @@
 
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI	0x8c31
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
+#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI		0x22b5
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI		0xa12f
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI	0x9d2f
 
 static const char hcd_name[] = "xhci_hcd";
 
@@ -133,6 +136,12 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
 		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
 	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) {
+		xhci->quirks |= XHCI_PME_STUCK_QUIRK;
+	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_EJ168) {
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
@@ -159,6 +168,21 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 				"QUIRK: Resetting on resume");
 }
 
+/*
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct xhci_hcd *xhci)
+{
+	u32 val;
+	void __iomem *reg;
+
+	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
+	val = readl(reg);
+	writel(val | BIT(28), reg);
+	readl(reg);
+}
+
 /* called during probe() after chip reset completes */
 static int xhci_pci_setup(struct usb_hcd *hcd)
 {
@@ -283,6 +307,9 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
 		pdev->no_d3cold = true;
 
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_quirk(xhci);
+
 	return xhci_suspend(xhci, do_wakeup);
 }
 
@@ -313,6 +340,9 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
 		usb_enable_intel_xhci_ports(pdev);
 
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_quirk(xhci);
+
 	retval = xhci_resume(xhci, hibernated);
 	return retval;
 }