[PATCH] USB: Add isp116x-hcd USB host controller driver

This patch provides an "isp116x-hcd" driver for Philips'
ISP1160/ISP1161 USB host controllers.

The driver:
 - is relatively small, meant for use on embedded platforms.
 - runs usbtests 1-14 without problems for days.
 - has been in use by 6-7 different people on ARM and PPC platforms,
   running a range of devices including USB hubs.
 - supports suspend/resume of both the platform device and the root hub;
   supports remote wakeup of the root hub (but NOT the platform device)
   by USB devices.
 - does NOT support ISO transfers (nobody has asked for them).
 - is PIO-only.

Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

4 files changed, 2479 insertions, 0 deletions

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 19e598c9641f..ed1899d307db 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -49,6 +49,19 @@ config USB_EHCI_ROOT_HUB_TT
 
 	  This supports the EHCI implementation from TransDimension Inc.
 
+config USB_ISP116X_HCD
+	tristate "ISP116X HCD support"
+	depends on USB
+	default N
+	---help---
+	  The ISP1160 and ISP1161 chips are USB host controllers. Enable this
+	  option if your board has this chip. If unsure, say N.
+
+	  This driver does not support isochronous transfers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called isp116x-hcd.
+
 config USB_OHCI_HCD
 	tristate "OHCI HCD support"
 	depends on USB && USB_ARCH_HAS_OHCI
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 5dbd3e7a27c7..350d14fc1cc9 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -4,6 +4,7 @@
 #
 
 obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
+obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
 obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
 obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
 obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
new file mode 100644
index 000000000000..69e7433d9ce8
--- /dev/null
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -0,0 +1,1882 @@
+/*
+ * ISP116x HCD (Host Controller Driver) for USB.
+ *
+ * Derived from the SL811 HCD, rewritten for ISP116x.
+ * Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee>
+ *
+ * Portions:
+ * Copyright (C) 2004 Psion Teklogix (for NetBook PRO)
+ * Copyright (C) 2004 David Brownell
+ *
+ * Periodic scheduling is based on Roman's OHCI code
+ * Copyright (C) 1999 Roman Weissgaerber
+ *
+ */
+
+/*
+ * The driver basically works. A number of people have used it with a range
+ * of devices.
+ *
+ *The driver passes all usbtests 1-14.
+ *
+ * Suspending/resuming of root hub via sysfs works. Remote wakeup works too.
+ * And suspending/resuming of platform device works too. Suspend/resume
+ * via HCD operations vector is not implemented.
+ *
+ * Iso transfer support is not implemented. Adding this would include
+ * implementing recovery from the failure to service the processed ITL
+ * fifo ram in time, which will involve chip reset.
+ *
+ * TODO:
+ + More testing of suspend/resume.
+*/
+
+/*
+  ISP116x chips require certain delays between accesses to its
+  registers. The following timing options exist.
+
+  1. Configure your memory controller (the best)
+  2. Implement platform-specific delay function possibly
+  combined with configuring the memory controller; see
+  include/linux/usb-isp116x.h for more info. Some broken
+  memory controllers line LH7A400 SMC need this. Also,
+  uncomment for that to work the following
+  USE_PLATFORM_DELAY macro.
+  3. Use ndelay (easiest, poorest). For that, uncomment
+  the following USE_NDELAY macro.
+*/
+#define USE_PLATFORM_DELAY
+//#define USE_NDELAY
+
+//#define DEBUG
+//#define VERBOSE
+/* Transfer descriptors. See dump_ptd() for printout format  */
+//#define PTD_TRACE
+/* enqueuing/finishing log of urbs */
+//#define URB_TRACE
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/usb_isp116x.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/byteorder.h>
+
+#ifndef DEBUG
+#	define	STUB_DEBUG_FILE
+#endif
+
+#include "../core/hcd.h"
+#include "isp116x.h"
+
+#define DRIVER_VERSION	"08 Apr 2005"
+#define DRIVER_DESC	"ISP116x USB Host Controller Driver"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static const char hcd_name[] = "isp116x-hcd";
+
+/*-----------------------------------------------------------------*/
+
+/*
+  Write len bytes to fifo, pad till 32-bit boundary
+ */
+static void write_ptddata_to_fifo(struct isp116x *isp116x, void *buf, int len)
+{
+	u8 *dp = (u8 *) buf;
+	u16 *dp2 = (u16 *) buf;
+	u16 w;
+	int quot = len % 4;
+
+	if ((unsigned long)dp2 & 1) {
+		/* not aligned */
+		for (; len > 1; len -= 2) {
+			w = *dp++;
+			w |= *dp++ << 8;
+			isp116x_raw_write_data16(isp116x, w);
+		}
+		if (len)
+			isp116x_write_data16(isp116x, (u16) * dp);
+	} else {
+		/* aligned */
+		for (; len > 1; len -= 2)
+			isp116x_raw_write_data16(isp116x, *dp2++);
+		if (len)
+			isp116x_write_data16(isp116x, 0xff & *((u8 *) dp2));
+	}
+	if (quot == 1 || quot == 2)
+		isp116x_raw_write_data16(isp116x, 0);
+}
+
+/*
+  Read len bytes from fifo and then read till 32-bit boundary.
+ */
+static void read_ptddata_from_fifo(struct isp116x *isp116x, void *buf, int len)
+{
+	u8 *dp = (u8 *) buf;
+	u16 *dp2 = (u16 *) buf;
+	u16 w;
+	int quot = len % 4;
+
+	if ((unsigned long)dp2 & 1) {
+		/* not aligned */
+		for (; len > 1; len -= 2) {
+			w = isp116x_raw_read_data16(isp116x);
+			*dp++ = w & 0xff;
+			*dp++ = (w >> 8) & 0xff;
+		}
+		if (len)
+			*dp = 0xff & isp116x_read_data16(isp116x);
+	} else {
+		/* aligned */
+		for (; len > 1; len -= 2)
+			*dp2++ = isp116x_raw_read_data16(isp116x);
+		if (len)
+			*(u8 *) dp2 = 0xff & isp116x_read_data16(isp116x);
+	}
+	if (quot == 1 || quot == 2)
+		isp116x_raw_read_data16(isp116x);
+}
+
+/*
+  Write ptd's and data for scheduled transfers into
+  the fifo ram. Fifo must be empty and ready.
+*/
+static void pack_fifo(struct isp116x *isp116x)
+{
+	struct isp116x_ep *ep;
+	struct ptd *ptd;
+	int buflen = isp116x->atl_last_dir == PTD_DIR_IN
+	    ? isp116x->atl_bufshrt : isp116x->atl_buflen;
+	int ptd_count = 0;
+
+	isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT);
+	isp116x_write_reg16(isp116x, HCXFERCTR, buflen);
+	isp116x_write_addr(isp116x, HCATLPORT | ISP116x_WRITE_OFFSET);
+	for (ep = isp116x->atl_active; ep; ep = ep->active) {
+		++ptd_count;
+		ptd = &ep->ptd;
+		dump_ptd(ptd);
+		dump_ptd_out_data(ptd, ep->data);
+		isp116x_write_data16(isp116x, ptd->count);
+		isp116x_write_data16(isp116x, ptd->mps);
+		isp116x_write_data16(isp116x, ptd->len);
+		isp116x_write_data16(isp116x, ptd->faddr);
+		buflen -= sizeof(struct ptd);
+		/* Skip writing data for last IN PTD */
+		if (ep->active || (isp116x->atl_last_dir != PTD_DIR_IN)) {
+			write_ptddata_to_fifo(isp116x, ep->data, ep->length);
+			buflen -= ALIGN(ep->length, 4);
+		}
+	}
+	BUG_ON(buflen);
+}
+
+/*
+  Read the processed ptd's and data from fifo ram back to
+  URBs' buffers. Fifo must be full and done
+*/
+static void unpack_fifo(struct isp116x *isp116x)
+{
+	struct isp116x_ep *ep;
+	struct ptd *ptd;
+	int buflen = isp116x->atl_last_dir == PTD_DIR_IN
+	    ? isp116x->atl_buflen : isp116x->atl_bufshrt;
+
+	isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT);
+	isp116x_write_reg16(isp116x, HCXFERCTR, buflen);
+	isp116x_write_addr(isp116x, HCATLPORT);
+	for (ep = isp116x->atl_active; ep; ep = ep->active) {
+		ptd = &ep->ptd;
+		ptd->count = isp116x_read_data16(isp116x);
+		ptd->mps = isp116x_read_data16(isp116x);
+		ptd->len = isp116x_read_data16(isp116x);
+		ptd->faddr = isp116x_read_data16(isp116x);
+		buflen -= sizeof(struct ptd);
+		/* Skip reading data for last Setup or Out PTD */
+		if (ep->active || (isp116x->atl_last_dir == PTD_DIR_IN)) {
+			read_ptddata_from_fifo(isp116x, ep->data, ep->length);
+			buflen -= ALIGN(ep->length, 4);
+		}
+		dump_ptd(ptd);
+		dump_ptd_in_data(ptd, ep->data);
+	}
+	BUG_ON(buflen);
+}
+
+/*---------------------------------------------------------------*/
+
+/*
+  Set up PTD's.
+*/
+static void preproc_atl_queue(struct isp116x *isp116x)
+{
+	struct isp116x_ep *ep;
+	struct urb *urb;
+	struct ptd *ptd;
+	u16 toggle, dir, len;
+
+	for (ep = isp116x->atl_active; ep; ep = ep->active) {
+		BUG_ON(list_empty(&ep->hep->urb_list));
+		urb = container_of(ep->hep->urb_list.next,
+				   struct urb, urb_list);
+		ptd = &ep->ptd;
+		len = ep->length;
+		spin_lock(&urb->lock);
+		ep->data = (unsigned char *)urb->transfer_buffer
+		    + urb->actual_length;
+
+		switch (ep->nextpid) {
+		case USB_PID_IN:
+			toggle = usb_gettoggle(urb->dev, ep->epnum, 0);
+			dir = PTD_DIR_IN;
+			break;
+		case USB_PID_OUT:
+			toggle = usb_gettoggle(urb->dev, ep->epnum, 1);
+			dir = PTD_DIR_OUT;
+			break;
+		case USB_PID_SETUP:
+			toggle = 0;
+			dir = PTD_DIR_SETUP;
+			len = sizeof(struct usb_ctrlrequest);
+			ep->data = urb->setup_packet;
+			break;
+		case USB_PID_ACK:
+			toggle = 1;
+			len = 0;
+			dir = (urb->transfer_buffer_length
+			       && usb_pipein(urb->pipe))
+			    ? PTD_DIR_OUT : PTD_DIR_IN;
+			break;
+		default:
+			/* To please gcc */
+			toggle = dir = 0;
+			ERR("%s %d: ep->nextpid %d\n", __func__, __LINE__,
+			    ep->nextpid);
+			BUG_ON(1);
+		}
+
+		ptd->count = PTD_CC_MSK | PTD_ACTIVE_MSK | PTD_TOGGLE(toggle);
+		ptd->mps = PTD_MPS(ep->maxpacket)
+		    | PTD_SPD(urb->dev->speed == USB_SPEED_LOW)
+		    | PTD_EP(ep->epnum);
+		ptd->len = PTD_LEN(len) | PTD_DIR(dir);
+		ptd->faddr = PTD_FA(usb_pipedevice(urb->pipe));
+		spin_unlock(&urb->lock);
+		if (!ep->active) {
+			ptd->mps |= PTD_LAST_MSK;
+			isp116x->atl_last_dir = dir;
+		}
+		isp116x->atl_bufshrt = sizeof(struct ptd) + isp116x->atl_buflen;
+		isp116x->atl_buflen = isp116x->atl_bufshrt + ALIGN(len, 4);
+	}
+}
+
+/*
+  Analyze transfer results, handle partial transfers and errors
+*/
+static void postproc_atl_queue(struct isp116x *isp116x)
+{
+	struct isp116x_ep *ep;
+	struct urb *urb;
+	struct usb_device *udev;
+	struct ptd *ptd;
+	int short_not_ok;
+	u8 cc;
+
+	for (ep = isp116x->atl_active; ep; ep = ep->active) {
+		BUG_ON(list_empty(&ep->hep->urb_list));
+		urb =
+		    container_of(ep->hep->urb_list.next, struct urb, urb_list);
+		udev = urb->dev;
+		ptd = &ep->ptd;
+		cc = PTD_GET_CC(ptd);
+
+		spin_lock(&urb->lock);
+		short_not_ok = 1;
+
+		/* Data underrun is special. For allowed underrun
+		   we clear the error and continue as normal. For
+		   forbidden underrun we finish the DATA stage
+		   immediately while for control transfer,
+		   we do a STATUS stage. */
+		if (cc == TD_DATAUNDERRUN) {
+			if (!(urb->transfer_flags & URB_SHORT_NOT_OK)) {
+				DBG("Allowed data underrun\n");
+				cc = TD_CC_NOERROR;
+				short_not_ok = 0;
+			} else {
+				ep->error_count = 1;
+				if (usb_pipecontrol(urb->pipe))
+					ep->nextpid = USB_PID_ACK;
+				else
+					usb_settoggle(udev, ep->epnum,
+						      ep->nextpid ==
+						      USB_PID_OUT,
+						      PTD_GET_TOGGLE(ptd) ^ 1);
+				urb->status = cc_to_error[TD_DATAUNDERRUN];
+				spin_unlock(&urb->lock);
+				continue;
+			}
+		}
+		/* Keep underrun error through the STATUS stage */
+		if (urb->status == cc_to_error[TD_DATAUNDERRUN])
+			cc = TD_DATAUNDERRUN;
+
+		if (cc != TD_CC_NOERROR && cc != TD_NOTACCESSED
+		    && (++ep->error_count >= 3 || cc == TD_CC_STALL
+			|| cc == TD_DATAOVERRUN)) {
+			if (urb->status == -EINPROGRESS)
+				urb->status = cc_to_error[cc];
+			if (ep->nextpid == USB_PID_ACK)
+				ep->nextpid = 0;
+			spin_unlock(&urb->lock);
+			continue;
+		}
+		/* According to usb spec, zero-length Int transfer signals
+		   finishing of the urb. Hey, does this apply only
+		   for IN endpoints? */
+		if (usb_pipeint(urb->pipe) && !PTD_GET_LEN(ptd)) {
+			if (urb->status == -EINPROGRESS)
+				urb->status = 0;
+			spin_unlock(&urb->lock);
+			continue;
+		}
+
+		/* Relax after previously failed, but later succeeded
+		   or correctly NAK'ed retransmission attempt */
+		if (ep->error_count
+		    && (cc == TD_CC_NOERROR || cc == TD_NOTACCESSED))
+			ep->error_count = 0;
+
+		/* Take into account idiosyncracies of the isp116x chip
+		   regarding toggle bit for failed transfers */
+		if (ep->nextpid == USB_PID_OUT)
+			usb_settoggle(udev, ep->epnum, 1, PTD_GET_TOGGLE(ptd)
+				      ^ (ep->error_count > 0));
+		else if (ep->nextpid == USB_PID_IN)
+			usb_settoggle(udev, ep->epnum, 0, PTD_GET_TOGGLE(ptd)
+				      ^ (ep->error_count > 0));
+
+		switch (ep->nextpid) {
+		case USB_PID_IN:
+		case USB_PID_OUT:
+			urb->actual_length += PTD_GET_COUNT(ptd);
+			if (PTD_GET_ACTIVE(ptd)
+			    || (cc != TD_CC_NOERROR && cc < 0x0E))
+				break;
+			if (urb->transfer_buffer_length != urb->actual_length) {
+				if (short_not_ok)
+					break;
+			} else {
+				if (urb->transfer_flags & URB_ZERO_PACKET
+				    && ep->nextpid == USB_PID_OUT
+				    && !(PTD_GET_COUNT(ptd) % ep->maxpacket)) {
+					DBG("Zero packet requested\n");
+					break;
+				}
+			}
+			/* All data for this URB is transferred, let's finish */
+			if (usb_pipecontrol(urb->pipe))
+				ep->nextpid = USB_PID_ACK;
+			else if (urb->status == -EINPROGRESS)
+				urb->status = 0;
+			break;
+		case USB_PID_SETUP:
+			if (PTD_GET_ACTIVE(ptd)
+			    || (cc != TD_CC_NOERROR && cc < 0x0E))
+				break;
+			if (urb->transfer_buffer_length == urb->actual_length)
+				ep->nextpid = USB_PID_ACK;
+			else if (usb_pipeout(urb->pipe)) {
+				usb_settoggle(udev, 0, 1, 1);
+				ep->nextpid = USB_PID_OUT;
+			} else {
+				usb_settoggle(udev, 0, 0, 1);
+				ep->nextpid = USB_PID_IN;
+			}
+			break;
+		case USB_PID_ACK:
+			if (PTD_GET_ACTIVE(ptd)
+			    || (cc != TD_CC_NOERROR && cc < 0x0E))
+				break;
+			if (urb->status == -EINPROGRESS)
+				urb->status = 0;
+			ep->nextpid = 0;
+			break;
+		default:
+			BUG_ON(1);
+		}
+		spin_unlock(&urb->lock);
+	}
+}
+
+/*
+  Take done or failed requests out of schedule. Give back
+  processed urbs.
+*/
+static void finish_request(struct isp116x *isp116x, struct isp116x_ep *ep,
+			   struct urb *urb, struct pt_regs *regs)
+__releases(isp116x->lock) __acquires(isp116x->lock)
+{
+	unsigned i;
+
+	urb->hcpriv = NULL;
+	ep->error_count = 0;
+
+	if (usb_pipecontrol(urb->pipe))
+		ep->nextpid = USB_PID_SETUP;
+
+	urb_dbg(urb, "Finish");
+
+	spin_unlock(&isp116x->lock);
+	usb_hcd_giveback_urb(isp116x_to_hcd(isp116x), urb, regs);
+	spin_lock(&isp116x->lock);
+
+	/* take idle endpoints out of the schedule */
+	if (!list_empty(&ep->hep->urb_list))
+		return;
+
+	/* async deschedule */
+	if (!list_empty(&ep->schedule)) {
+		list_del_init(&ep->schedule);
+		return;
+	}
+
+	/* periodic deschedule */
+	DBG("deschedule qh%d/%p branch %d\n", ep->period, ep, ep->branch);
+	for (i = ep->branch; i < PERIODIC_SIZE; i += ep->period) {
+		struct isp116x_ep *temp;
+		struct isp116x_ep **prev = &isp116x->periodic[i];
+
+		while (*prev && ((temp = *prev) != ep))
+			prev = &temp->next;
+		if (*prev)
+			*prev = ep->next;
+		isp116x->load[i] -= ep->load;
+	}
+	ep->branch = PERIODIC_SIZE;
+	isp116x_to_hcd(isp116x)->self.bandwidth_allocated -=
+	    ep->load / ep->period;
+
+	/* switch irq type? */
+	if (!--isp116x->periodic_count) {
+		isp116x->irqenb &= ~HCuPINT_SOF;
+		isp116x->irqenb |= HCuPINT_ATL;
+	}
+}
+
+/*
+  Scan transfer lists, schedule transfers, send data off
+  to chip.
+ */
+static void start_atl_transfers(struct isp116x *isp116x)
+{
+	struct isp116x_ep *last_ep = NULL, *ep;
+	struct urb *urb;
+	u16 load = 0;
+	int len, index, speed, byte_time;
+
+	if (atomic_read(&isp116x->atl_finishing))
+		return;
+
+	if (!HC_IS_RUNNING(isp116x_to_hcd(isp116x)->state))
+		return;
+
+	/* FIFO not empty? */
+	if (isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_FULL)
+		return;
+
+	isp116x->atl_active = NULL;
+	isp116x->atl_buflen = isp116x->atl_bufshrt = 0;
+
+	/* Schedule int transfers */
+	if (isp116x->periodic_count) {
+		isp116x->fmindex = index =
+		    (isp116x->fmindex + 1) & (PERIODIC_SIZE - 1);
+		if ((load = isp116x->load[index])) {
+			/* Bring all int transfers for this frame
+			   into the active queue */
+			isp116x->atl_active = last_ep =
+			    isp116x->periodic[index];
+			while (last_ep->next)
+				last_ep = (last_ep->active = last_ep->next);
+			last_ep->active = NULL;
+		}
+	}
+
+	/* Schedule control/bulk transfers */
+	list_for_each_entry(ep, &isp116x->async, schedule) {
+		urb = container_of(ep->hep->urb_list.next,
+				   struct urb, urb_list);
+		speed = urb->dev->speed;
+		byte_time = speed == USB_SPEED_LOW
+		    ? BYTE_TIME_LOWSPEED : BYTE_TIME_FULLSPEED;
+
+		if (ep->nextpid == USB_PID_SETUP) {
+			len = sizeof(struct usb_ctrlrequest);
+		} else if (ep->nextpid == USB_PID_ACK) {
+			len = 0;
+		} else {
+			/* Find current free length ... */
+			len = (MAX_LOAD_LIMIT - load) / byte_time;
+
+			/* ... then limit it to configured max size ... */
+			len = min(len, speed == USB_SPEED_LOW ?
+				  MAX_TRANSFER_SIZE_LOWSPEED :
+				  MAX_TRANSFER_SIZE_FULLSPEED);
+
+			/* ... and finally cut to the multiple of MaxPacketSize,
+			   or to the real length if there's enough room. */
+			if (len <
+			    (urb->transfer_buffer_length -
+			     urb->actual_length)) {
+				len -= len % ep->maxpacket;
+				if (!len)
+					continue;
+			} else
+				len = urb->transfer_buffer_length -
+				    urb->actual_length;
+			BUG_ON(len < 0);
+		}
+
+		load += len * byte_time;
+		if (load > MAX_LOAD_LIMIT)
+			break;
+
+		ep->active = NULL;
+		ep->length = len;
+		if (last_ep)
+			last_ep->active = ep;
+		else
+			isp116x->atl_active = ep;
+		last_ep = ep;
+	}
+
+	/* Avoid starving of endpoints */
+	if ((&isp116x->async)->next != (&isp116x->async)->prev)
+		list_move(&isp116x->async, (&isp116x->async)->next);
+
+	if (isp116x->atl_active) {
+		preproc_atl_queue(isp116x);
+		pack_fifo(isp116x);
+	}
+}
+
+/*
+  Finish the processed transfers
+*/
+static void finish_atl_transfers(struct isp116x *isp116x, struct pt_regs *regs)
+{
+	struct isp116x_ep *ep;
+	struct urb *urb;
+
+	if (!isp116x->atl_active)
+		return;
+	/* Fifo not ready? */
+	if (!(isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_DONE))
+		return;
+
+	atomic_inc(&isp116x->atl_finishing);
+	unpack_fifo(isp116x);
+	postproc_atl_queue(isp116x);
+	for (ep = isp116x->atl_active; ep; ep = ep->active) {
+		urb =
+		    container_of(ep->hep->urb_list.next, struct urb, urb_list);
+		/* USB_PID_ACK check here avoids finishing of
+		   control transfers, for which TD_DATAUNDERRUN
+		   occured, while URB_SHORT_NOT_OK was set */
+		if (urb && urb->status != -EINPROGRESS
+		    && ep->nextpid != USB_PID_ACK)
+			finish_request(isp116x, ep, urb, regs);
+	}
+	atomic_dec(&isp116x->atl_finishing);
+}
+
+static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	u16 irqstat;
+	irqreturn_t ret = IRQ_NONE;
+
+	spin_lock(&isp116x->lock);
+	isp116x_write_reg16(isp116x, HCuPINTENB, 0);
+	irqstat = isp116x_read_reg16(isp116x, HCuPINT);
+	isp116x_write_reg16(isp116x, HCuPINT, irqstat);
+
+	if (irqstat & (HCuPINT_ATL | HCuPINT_SOF)) {
+		ret = IRQ_HANDLED;
+		finish_atl_transfers(isp116x, regs);
+	}
+
+	if (irqstat & HCuPINT_OPR) {
+		u32 intstat = isp116x_read_reg32(isp116x, HCINTSTAT);
+		isp116x_write_reg32(isp116x, HCINTSTAT, intstat);
+		if (intstat & HCINT_UE) {
+			ERR("Unrecoverable error\n");
+			/* What should we do here? Reset?  */
+		}
+		if (intstat & HCINT_RHSC) {
+			isp116x->rhstatus =
+			    isp116x_read_reg32(isp116x, HCRHSTATUS);
+			isp116x->rhport[0] =
+			    isp116x_read_reg32(isp116x, HCRHPORT1);
+			isp116x->rhport[1] =
+			    isp116x_read_reg32(isp116x, HCRHPORT2);
+		}
+		if (intstat & HCINT_RD) {
+			DBG("---- remote wakeup\n");
+			schedule_work(&isp116x->rh_resume);
+			ret = IRQ_HANDLED;
+		}
+		irqstat &= ~HCuPINT_OPR;
+		ret = IRQ_HANDLED;
+	}
+
+	if (irqstat & (HCuPINT_ATL | HCuPINT_SOF)) {
+		start_atl_transfers(isp116x);
+	}
+
+	isp116x_write_reg16(isp116x, HCuPINTENB, isp116x->irqenb);
+	spin_unlock(&isp116x->lock);
+	return ret;
+}
+
+/*-----------------------------------------------------------------*/
+
+/* usb 1.1 says max 90% of a frame is available for periodic transfers.
+ * this driver doesn't promise that much since it's got to handle an
+ * IRQ per packet; irq handling latencies also use up that time.
+ */
+
+/* out of 1000 us */
+#define	MAX_PERIODIC_LOAD	600
+static int balance(struct isp116x *isp116x, u16 period, u16 load)
+{
+	int i, branch = -ENOSPC;
+
+	/* search for the least loaded schedule branch of that period
+	   which has enough bandwidth left unreserved. */
+	for (i = 0; i < period; i++) {
+		if (branch < 0 || isp116x->load[branch] > isp116x->load[i]) {
+			int j;
+
+			for (j = i; j < PERIODIC_SIZE; j += period) {
+				if ((isp116x->load[j] + load)
+				    > MAX_PERIODIC_LOAD)
+					break;
+			}
+			if (j < PERIODIC_SIZE)
+				continue;
+			branch = i;
+		}
+	}
+	return branch;
+}
+
+/* NB! ALL the code above this point runs with isp116x->lock
+   held, irqs off
+*/
+
+/*-----------------------------------------------------------------*/
+
+static int isp116x_urb_enqueue(struct usb_hcd *hcd,
+			       struct usb_host_endpoint *hep, struct urb *urb,
+			       int mem_flags)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	struct usb_device *udev = urb->dev;
+	unsigned int pipe = urb->pipe;
+	int is_out = !usb_pipein(pipe);
+	int type = usb_pipetype(pipe);
+	int epnum = usb_pipeendpoint(pipe);
+	struct isp116x_ep *ep = NULL;
+	unsigned long flags;
+	int i;
+	int ret = 0;
+
+	urb_dbg(urb, "Enqueue");
+
+	if (type == PIPE_ISOCHRONOUS) {
+		ERR("Isochronous transfers not supported\n");
+		urb_dbg(urb, "Refused to enqueue");
+		return -ENXIO;
+	}
+	/* avoid all allocations within spinlocks: request or endpoint */
+	if (!hep->hcpriv) {
+		ep = kcalloc(1, sizeof *ep, (__force unsigned)mem_flags);
+		if (!ep)
+			return -ENOMEM;
+	}
+
+	spin_lock_irqsave(&isp116x->lock, flags);
+	if (!HC_IS_RUNNING(hcd->state)) {
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	if (hep->hcpriv)
+		ep = hep->hcpriv;
+	else {
+		INIT_LIST_HEAD(&ep->schedule);
+		ep->udev = usb_get_dev(udev);
+		ep->epnum = epnum;
+		ep->maxpacket = usb_maxpacket(udev, urb->pipe, is_out);
+		usb_settoggle(udev, epnum, is_out, 0);
+
+		if (type == PIPE_CONTROL) {
+			ep->nextpid = USB_PID_SETUP;
+		} else if (is_out) {
+			ep->nextpid = USB_PID_OUT;
+		} else {
+			ep->nextpid = USB_PID_IN;
+		}
+
+		if (urb->interval) {
+			/*
+			   With INT URBs submitted, the driver works with SOF
+			   interrupt enabled and ATL interrupt disabled. After
+			   the PTDs are written to fifo ram, the chip starts
+			   fifo processing and usb transfers after the next
+			   SOF and continues until the transfers are finished
+			   (succeeded or failed) or the frame ends. Therefore,
+			   the transfers occur only in every second frame,
+			   while fifo reading/writing and data processing
+			   occur in every other second frame. */
+			if (urb->interval < 2)
+				urb->interval = 2;
+			if (urb->interval > 2 * PERIODIC_SIZE)
+				urb->interval = 2 * PERIODIC_SIZE;
+			ep->period = urb->interval >> 1;
+			ep->branch = PERIODIC_SIZE;
+			ep->load = usb_calc_bus_time(udev->speed,
+						     !is_out,
+						     (type == PIPE_ISOCHRONOUS),
+						     usb_maxpacket(udev, pipe,
+								   is_out)) /
+			    1000;
+		}
+		hep->hcpriv = ep;
+		ep->hep = hep;
+	}
+
+	/* maybe put endpoint into schedule */
+	switch (type) {
+	case PIPE_CONTROL:
+	case PIPE_BULK:
+		if (list_empty(&ep->schedule))
+			list_add_tail(&ep->schedule, &isp116x->async);
+		break;
+	case PIPE_INTERRUPT:
+		urb->interval = ep->period;
+		ep->length = min((int)ep->maxpacket,
+				 urb->transfer_buffer_length);
+
+		/* urb submitted for already existing endpoint */
+		if (ep->branch < PERIODIC_SIZE)
+			break;
+
+		ret = ep->branch = balance(isp116x, ep->period, ep->load);
+		if (ret < 0)
+			goto fail;
+		ret = 0;
+
+		urb->start_frame = (isp116x->fmindex & (PERIODIC_SIZE - 1))
+		    + ep->branch;
+
+		/* sort each schedule branch by period (slow before fast)
+		   to share the faster parts of the tree without needing
+		   dummy/placeholder nodes */
+		DBG("schedule qh%d/%p branch %d\n", ep->period, ep, ep->branch);
+		for (i = ep->branch; i < PERIODIC_SIZE; i += ep->period) {
+			struct isp116x_ep **prev = &isp116x->periodic[i];
+			struct isp116x_ep *here = *prev;
+
+			while (here && ep != here) {
+				if (ep->period > here->period)
+					break;
+				prev = &here->next;
+				here = *prev;
+			}
+			if (ep != here) {
+				ep->next = here;
+				*prev = ep;
+			}
+			isp116x->load[i] += ep->load;
+		}
+		hcd->self.bandwidth_allocated += ep->load / ep->period;
+
+		/* switch over to SOFint */
+		if (!isp116x->periodic_count++) {
+			isp116x->irqenb &= ~HCuPINT_ATL;
+			isp116x->irqenb |= HCuPINT_SOF;
+			isp116x_write_reg16(isp116x, HCuPINTENB,
+					    isp116x->irqenb);
+		}
+	}
+
+	/* in case of unlink-during-submit */
+	spin_lock(&urb->lock);
+	if (urb->status != -EINPROGRESS) {
+		spin_unlock(&urb->lock);
+		finish_request(isp116x, ep, urb, NULL);
+		ret = 0;
+		goto fail;
+	}
+	urb->hcpriv = hep;
+	spin_unlock(&urb->lock);
+	start_atl_transfers(isp116x);
+
+      fail:
+	spin_unlock_irqrestore(&isp116x->lock, flags);
+	return ret;
+}
+
+/*
+   Dequeue URBs.
+*/
+static int isp116x_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	struct usb_host_endpoint *hep;
+	struct isp116x_ep *ep, *ep_act;
+	unsigned long flags;
+
+	spin_lock_irqsave(&isp116x->lock, flags);
+	hep = urb->hcpriv;
+	/* URB already unlinked (or never linked)? */
+	if (!hep) {
+		spin_unlock_irqrestore(&isp116x->lock, flags);
+		return 0;
+	}
+	ep = hep->hcpriv;
+	WARN_ON(hep != ep->hep);
+
+	/* In front of queue? */
+	if (ep->hep->urb_list.next == &urb->urb_list)
+		/* active? */
+		for (ep_act = isp116x->atl_active; ep_act;
+		     ep_act = ep_act->active)
+			if (ep_act == ep) {
+				VDBG("dequeue, urb %p active; wait for irq\n",
+				     urb);
+				urb = NULL;
+				break;
+			}
+
+	if (urb)
+		finish_request(isp116x, ep, urb, NULL);
+
+	spin_unlock_irqrestore(&isp116x->lock, flags);
+	return 0;
+}
+
+static void isp116x_endpoint_disable(struct usb_hcd *hcd,
+				     struct usb_host_endpoint *hep)
+{
+	int i;
+	struct isp116x_ep *ep = hep->hcpriv;;
+
+	if (!ep)
+		return;
+
+	/* assume we'd just wait for the irq */
+	for (i = 0; i < 100 && !list_empty(&hep->urb_list); i++)
+		msleep(3);
+	if (!list_empty(&hep->urb_list))
+		WARN("ep %p not empty?\n", ep);
+
+	usb_put_dev(ep->udev);
+	kfree(ep);
+	hep->hcpriv = NULL;
+}
+
+static int isp116x_get_frame(struct usb_hcd *hcd)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	u32 fmnum;
+	unsigned long flags;
+
+	spin_lock_irqsave(&isp116x->lock, flags);
+	fmnum = isp116x_read_reg32(isp116x, HCFMNUM);
+	spin_unlock_irqrestore(&isp116x->lock, flags);
+	return (int)fmnum;
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+  Adapted from ohci-hub.c. Currently we don't support autosuspend.
+*/
+static int isp116x_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	int ports, i, changed = 0;
+
+	if (!HC_IS_RUNNING(hcd->state))
+		return -ESHUTDOWN;
+
+	ports = isp116x->rhdesca & RH_A_NDP;
+
+	/* init status */
+	if (isp116x->rhstatus & (RH_HS_LPSC | RH_HS_OCIC))
+		buf[0] = changed = 1;
+	else
+		buf[0] = 0;
+
+	for (i = 0; i < ports; i++) {
+		u32 status = isp116x->rhport[i];
+
+		if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
+			      | RH_PS_OCIC | RH_PS_PRSC)) {
+			changed = 1;
+			buf[0] |= 1 << (i + 1);
+			continue;
+		}
+	}
+	return changed;
+}
+
+static void isp116x_hub_descriptor(struct isp116x *isp116x,
+				   struct usb_hub_descriptor *desc)
+{
+	u32 reg = isp116x->rhdesca;
+
+	desc->bDescriptorType = 0x29;
+	desc->bDescLength = 9;
+	desc->bHubContrCurrent = 0;
+	desc->bNbrPorts = (u8) (reg & 0x3);
+	/* Power switching, device type, overcurrent. */
+	desc->wHubCharacteristics =
+	    (__force __u16) cpu_to_le16((u16) ((reg >> 8) & 0x1f));
+	desc->bPwrOn2PwrGood = (u8) ((reg >> 24) & 0xff);
+	/* two bitmaps:  ports removable, and legacy PortPwrCtrlMask */
+	desc->bitmap[0] = desc->bNbrPorts == 1 ? 1 << 1 : 3 << 1;
+	desc->bitmap[1] = ~0;
+}
+
+/* Perform reset of a given port.
+   It would be great to just start the reset and let the
+   USB core to clear the reset in due time. However,
+   root hub ports should be reset for at least 50 ms, while
+   our chip stays in reset for about 10 ms. I.e., we must
+   repeatedly reset it ourself here.
+*/
+static inline void root_port_reset(struct isp116x *isp116x, unsigned port)
+{
+	u32 tmp;
+	unsigned long flags, t;
+
+	/* Root hub reset should be 50 ms, but some devices
+	   want it even longer. */
+	t = jiffies + msecs_to_jiffies(100);
+
+	while (time_before(jiffies, t)) {
+		spin_lock_irqsave(&isp116x->lock, flags);
+		/* spin until any current reset finishes */
+		for (;;) {
+			tmp = isp116x_read_reg32(isp116x, port ?
+						 HCRHPORT2 : HCRHPORT1);
+			if (!(tmp & RH_PS_PRS))
+				break;
+			udelay(500);
+		}
+		/* Don't reset a disconnected port */
+		if (!(tmp & RH_PS_CCS)) {
+			spin_unlock_irqrestore(&isp116x->lock, flags);
+			break;
+		}
+		/* Reset lasts 10ms (claims datasheet) */
+		isp116x_write_reg32(isp116x, port ? HCRHPORT2 :
+				    HCRHPORT1, (RH_PS_PRS));
+		spin_unlock_irqrestore(&isp116x->lock, flags);
+		msleep(10);
+	}
+}
+
+/* Adapted from ohci-hub.c */
+static int isp116x_hub_control(struct usb_hcd *hcd,
+			       u16 typeReq,
+			       u16 wValue, u16 wIndex, char *buf, u16 wLength)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	int ret = 0;
+	unsigned long flags;
+	int ports = isp116x->rhdesca & RH_A_NDP;
+	u32 tmp = 0;
+
+	switch (typeReq) {
+	case ClearHubFeature:
+		DBG("ClearHubFeature: ");
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+			DBG("C_HUB_OVER_CURRENT\n");
+			spin_lock_irqsave(&isp116x->lock, flags);
+			isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_OCIC);
+			spin_unlock_irqrestore(&isp116x->lock, flags);
+		case C_HUB_LOCAL_POWER:
+			DBG("C_HUB_LOCAL_POWER\n");
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetHubFeature:
+		DBG("SetHubFeature: ");
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			DBG("C_HUB_OVER_CURRENT or C_HUB_LOCAL_POWER\n");
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case GetHubDescriptor:
+		DBG("GetHubDescriptor\n");
+		isp116x_hub_descriptor(isp116x,
+				       (struct usb_hub_descriptor *)buf);
+		break;
+	case GetHubStatus:
+		DBG("GetHubStatus\n");
+		*(__le32 *) buf = cpu_to_le32(0);
+		break;
+	case GetPortStatus:
+		DBG("GetPortStatus\n");
+		if (!wIndex || wIndex > ports)
+			goto error;
+		tmp = isp116x->rhport[--wIndex];
+		*(__le32 *) buf = cpu_to_le32(tmp);
+		DBG("GetPortStatus: port[%d]  %08x\n", wIndex + 1, tmp);
+		break;
+	case ClearPortFeature:
+		DBG("ClearPortFeature: ");
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			DBG("USB_PORT_FEAT_ENABLE\n");
+			tmp = RH_PS_CCS;
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			DBG("USB_PORT_FEAT_C_ENABLE\n");
+			tmp = RH_PS_PESC;
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			DBG("USB_PORT_FEAT_SUSPEND\n");
+			tmp = RH_PS_POCI;
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			DBG("USB_PORT_FEAT_C_SUSPEND\n");
+			tmp = RH_PS_PSSC;
+			break;
+		case USB_PORT_FEAT_POWER:
+			DBG("USB_PORT_FEAT_POWER\n");
+			tmp = RH_PS_LSDA;
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			DBG("USB_PORT_FEAT_C_CONNECTION\n");
+			tmp = RH_PS_CSC;
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			DBG("USB_PORT_FEAT_C_OVER_CURRENT\n");
+			tmp = RH_PS_OCIC;
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			DBG("USB_PORT_FEAT_C_RESET\n");
+			tmp = RH_PS_PRSC;
+			break;
+		default:
+			goto error;
+		}
+		spin_lock_irqsave(&isp116x->lock, flags);
+		isp116x_write_reg32(isp116x, wIndex
+				    ? HCRHPORT2 : HCRHPORT1, tmp);
+		isp116x->rhport[wIndex] =
+		    isp116x_read_reg32(isp116x, wIndex ? HCRHPORT2 : HCRHPORT1);
+		spin_unlock_irqrestore(&isp116x->lock, flags);
+		break;
+	case SetPortFeature:
+		DBG("SetPortFeature: ");
+		if (!wIndex || wIndex > ports)
+			goto error;
+		wIndex--;
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			DBG("USB_PORT_FEAT_SUSPEND\n");
+			spin_lock_irqsave(&isp116x->lock, flags);
+			isp116x_write_reg32(isp116x, wIndex
+					    ? HCRHPORT2 : HCRHPORT1, RH_PS_PSS);
+			break;
+		case USB_PORT_FEAT_POWER:
+			DBG("USB_PORT_FEAT_POWER\n");
+			spin_lock_irqsave(&isp116x->lock, flags);
+			isp116x_write_reg32(isp116x, wIndex
+					    ? HCRHPORT2 : HCRHPORT1, RH_PS_PPS);
+			break;
+		case USB_PORT_FEAT_RESET:
+			DBG("USB_PORT_FEAT_RESET\n");
+			root_port_reset(isp116x, wIndex);
+			spin_lock_irqsave(&isp116x->lock, flags);
+			break;
+		default:
+			goto error;
+		}
+		isp116x->rhport[wIndex] =
+		    isp116x_read_reg32(isp116x, wIndex ? HCRHPORT2 : HCRHPORT1);
+		spin_unlock_irqrestore(&isp116x->lock, flags);
+		break;
+
+	default:
+	      error:
+		/* "protocol stall" on error */
+		DBG("PROTOCOL STALL\n");
+		ret = -EPIPE;
+	}
+	return ret;
+}
+
+#ifdef	CONFIG_PM
+
+static int isp116x_hub_suspend(struct usb_hcd *hcd)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	unsigned long flags;
+	u32 val;
+	int ret = 0;
+
+	spin_lock_irqsave(&isp116x->lock, flags);
+
+	val = isp116x_read_reg32(isp116x, HCCONTROL);
+	switch (val & HCCONTROL_HCFS) {
+	case HCCONTROL_USB_OPER:
+		hcd->state = HC_STATE_QUIESCING;
+		val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE);
+		val |= HCCONTROL_USB_SUSPEND;
+		if (hcd->remote_wakeup)
+			val |= HCCONTROL_RWE;
+		/* Wait for usb transfers to finish */
+		mdelay(2);
+		isp116x_write_reg32(isp116x, HCCONTROL, val);
+		hcd->state = HC_STATE_SUSPENDED;
+		/* Wait for devices to suspend */
+		mdelay(5);
+	case HCCONTROL_USB_SUSPEND:
+		break;
+	case HCCONTROL_USB_RESUME:
+		isp116x_write_reg32(isp116x, HCCONTROL,
+				    (val & ~HCCONTROL_HCFS) |
+				    HCCONTROL_USB_RESET);
+	case HCCONTROL_USB_RESET:
+		ret = -EBUSY;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	spin_unlock_irqrestore(&isp116x->lock, flags);
+	return ret;
+}
+
+static int isp116x_hub_resume(struct usb_hcd *hcd)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	u32 val;
+	int ret = -EINPROGRESS;
+
+	msleep(5);
+	spin_lock_irq(&isp116x->lock);
+
+	val = isp116x_read_reg32(isp116x, HCCONTROL);
+	switch (val & HCCONTROL_HCFS) {
+	case HCCONTROL_USB_SUSPEND:
+		val &= ~HCCONTROL_HCFS;
+		val |= HCCONTROL_USB_RESUME;
+		isp116x_write_reg32(isp116x, HCCONTROL, val);
+	case HCCONTROL_USB_RESUME:
+		break;
+	case HCCONTROL_USB_OPER:
+		/* Without setting power_state here the
+		   SUSPENDED state won't be removed from
+		   sysfs/usbN/power.state as a response to remote
+		   wakeup. Maybe in the future. */
+		hcd->self.root_hub->dev.power.power_state = PMSG_ON;
+		ret = 0;
+		break;
+	default:
+		ret = -EBUSY;
+	}
+
+	if (ret != -EINPROGRESS) {
+		spin_unlock_irq(&isp116x->lock);
+		return ret;
+	}
+
+	val = isp116x->rhdesca & RH_A_NDP;
+	while (val--) {
+		u32 stat =
+		    isp116x_read_reg32(isp116x, val ? HCRHPORT2 : HCRHPORT1);
+		/* force global, not selective, resume */
+		if (!(stat & RH_PS_PSS))
+			continue;
+		DBG("%s: Resuming port %d\n", __func__, val);
+		isp116x_write_reg32(isp116x, RH_PS_POCI, val
+				    ? HCRHPORT2 : HCRHPORT1);
+	}
+	spin_unlock_irq(&isp116x->lock);
+
+	hcd->state = HC_STATE_RESUMING;
+	mdelay(20);
+
+	/* Go operational */
+	spin_lock_irq(&isp116x->lock);
+	val = isp116x_read_reg32(isp116x, HCCONTROL);
+	isp116x_write_reg32(isp116x, HCCONTROL,
+			    (val & ~HCCONTROL_HCFS) | HCCONTROL_USB_OPER);
+	spin_unlock_irq(&isp116x->lock);
+	/* see analogous comment above */
+	hcd->self.root_hub->dev.power.power_state = PMSG_ON;
+	hcd->state = HC_STATE_RUNNING;
+
+	return 0;
+}
+
+static void isp116x_rh_resume(void *_hcd)
+{
+	struct usb_hcd *hcd = _hcd;
+
+	usb_resume_device(hcd->self.root_hub);
+}
+
+#else
+
+#define	isp116x_hub_suspend	NULL
+#define	isp116x_hub_resume	NULL
+
+static void isp116x_rh_resume(void *_hcd)
+{
+}
+
+#endif
+
+/*-----------------------------------------------------------------*/
+
+#ifdef STUB_DEBUG_FILE
+
+static inline void create_debug_file(struct isp116x *isp116x)
+{
+}
+
+static inline void remove_debug_file(struct isp116x *isp116x)
+{
+}
+
+#else
+
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
+static void dump_irq(struct seq_file *s, char *label, u16 mask)
+{
+	seq_printf(s, "%s %04x%s%s%s%s%s%s\n", label, mask,
+		   mask & HCuPINT_CLKRDY ? " clkrdy" : "",
+		   mask & HCuPINT_SUSP ? " susp" : "",
+		   mask & HCuPINT_OPR ? " opr" : "",
+		   mask & HCuPINT_AIIEOT ? " eot" : "",
+		   mask & HCuPINT_ATL ? " atl" : "",
+		   mask & HCuPINT_SOF ? " sof" : "");
+}
+
+static void dump_int(struct seq_file *s, char *label, u32 mask)
+{
+	seq_printf(s, "%s %08x%s%s%s%s%s%s%s\n", label, mask,
+		   mask & HCINT_MIE ? " MIE" : "",
+		   mask & HCINT_RHSC ? " rhsc" : "",
+		   mask & HCINT_FNO ? " fno" : "",
+		   mask & HCINT_UE ? " ue" : "",
+		   mask & HCINT_RD ? " rd" : "",
+		   mask & HCINT_SF ? " sof" : "", mask & HCINT_SO ? " so" : "");
+}
+
+static int proc_isp116x_show(struct seq_file *s, void *unused)
+{
+	struct isp116x *isp116x = s->private;
+	struct isp116x_ep *ep;
+	struct urb *urb;
+	unsigned i;
+	char *str;
+
+	seq_printf(s, "%s\n%s version %s\n",
+		   isp116x_to_hcd(isp116x)->product_desc, hcd_name,
+		   DRIVER_VERSION);
+
+	if (HC_IS_SUSPENDED(isp116x_to_hcd(isp116x)->state)) {
+		seq_printf(s, "HCD is suspended\n");
+		return 0;
+	}
+	if (!HC_IS_RUNNING(isp116x_to_hcd(isp116x)->state)) {
+		seq_printf(s, "HCD not running\n");
+		return 0;
+	}
+
+	spin_lock_irq(&isp116x->lock);
+
+	dump_irq(s, "hc_irq_enable", isp116x_read_reg16(isp116x, HCuPINTENB));
+	dump_irq(s, "hc_irq_status", isp116x_read_reg16(isp116x, HCuPINT));
+	dump_int(s, "hc_int_enable", isp116x_read_reg32(isp116x, HCINTENB));
+	dump_int(s, "hc_int_status", isp116x_read_reg32(isp116x, HCINTSTAT));
+
+	list_for_each_entry(ep, &isp116x->async, schedule) {
+
+		switch (ep->nextpid) {
+		case USB_PID_IN:
+			str = "in";
+			break;
+		case USB_PID_OUT:
+			str = "out";
+			break;
+		case USB_PID_SETUP:
+			str = "setup";
+			break;
+		case USB_PID_ACK:
+			str = "status";
+			break;
+		default:
+			str = "?";
+			break;
+		};
+		seq_printf(s, "%p, ep%d%s, maxpacket %d:\n", ep,
+			   ep->epnum, str, ep->maxpacket);
+		list_for_each_entry(urb, &ep->hep->urb_list, urb_list) {
+			seq_printf(s, "  urb%p, %d/%d\n", urb,
+				   urb->actual_length,
+				   urb->transfer_buffer_length);
+		}
+	}
+	if (!list_empty(&isp116x->async))
+		seq_printf(s, "\n");
+
+	seq_printf(s, "periodic size= %d\n", PERIODIC_SIZE);
+
+	for (i = 0; i < PERIODIC_SIZE; i++) {
+		ep = isp116x->periodic[i];
+		if (!ep)
+			continue;
+		seq_printf(s, "%2d [%3d]:\n", i, isp116x->load[i]);
+
+		/* DUMB: prints shared entries multiple times */
+		do {
+			seq_printf(s, "   %d/%p (%sdev%d ep%d%s max %d)\n",
+				   ep->period, ep,
+				   (ep->udev->speed ==
+				    USB_SPEED_FULL) ? "" : "ls ",
+				   ep->udev->devnum, ep->epnum,
+				   (ep->epnum ==
+				    0) ? "" : ((ep->nextpid ==
+						USB_PID_IN) ? "in" : "out"),
+				   ep->maxpacket);
+			ep = ep->next;
+		} while (ep);
+	}
+	spin_unlock_irq(&isp116x->lock);
+	seq_printf(s, "\n");
+
+	return 0;
+}
+
+static int proc_isp116x_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, proc_isp116x_show, PDE(inode)->data);
+}
+
+static struct file_operations proc_ops = {
+	.open = proc_isp116x_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+/* expect just one isp116x per system */
+static const char proc_filename[] = "driver/isp116x";
+
+static void create_debug_file(struct isp116x *isp116x)
+{
+	struct proc_dir_entry *pde;
+
+	pde = create_proc_entry(proc_filename, 0, NULL);
+	if (pde == NULL)
+		return;
+
+	pde->proc_fops = &proc_ops;
+	pde->data = isp116x;
+	isp116x->pde = pde;
+}
+
+static void remove_debug_file(struct isp116x *isp116x)
+{
+	if (isp116x->pde)
+		remove_proc_entry(proc_filename, NULL);
+}
+
+#endif
+
+/*-----------------------------------------------------------------*/
+
+/*
+  Software reset - can be called from any contect.
+*/
+static int isp116x_sw_reset(struct isp116x *isp116x)
+{
+	int retries = 15;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&isp116x->lock, flags);
+	isp116x_write_reg16(isp116x, HCSWRES, HCSWRES_MAGIC);
+	isp116x_write_reg32(isp116x, HCCMDSTAT, HCCMDSTAT_HCR);
+	while (--retries) {
+		/* It usually resets within 1 ms */
+		mdelay(1);
+		if (!(isp116x_read_reg32(isp116x, HCCMDSTAT) & HCCMDSTAT_HCR))
+			break;
+	}
+	if (!retries) {
+		ERR("Software reset timeout\n");
+		ret = -ETIME;
+	}
+	spin_unlock_irqrestore(&isp116x->lock, flags);
+	return ret;
+}
+
+/*
+  Reset. Tries to perform platform-specific hardware
+  reset first; falls back to software reset.
+*/
+static int isp116x_reset(struct usb_hcd *hcd)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	unsigned long t;
+	u16 clkrdy = 0;
+	int ret = 0, timeout = 15 /* ms */ ;
+
+	if (isp116x->board && isp116x->board->reset) {
+		/* Hardware reset */
+		isp116x->board->reset(hcd->self.controller, 1);
+		msleep(10);
+		if (isp116x->board->clock)
+			isp116x->board->clock(hcd->self.controller, 1);
+		msleep(1);
+		isp116x->board->reset(hcd->self.controller, 0);
+	} else
+		ret = isp116x_sw_reset(isp116x);
+
+	if (ret)
+		return ret;
+
+	t = jiffies + msecs_to_jiffies(timeout);
+	while (time_before_eq(jiffies, t)) {
+		msleep(4);
+		spin_lock_irq(&isp116x->lock);
+		clkrdy = isp116x_read_reg16(isp116x, HCuPINT) & HCuPINT_CLKRDY;
+		spin_unlock_irq(&isp116x->lock);
+		if (clkrdy)
+			break;
+	}
+	if (!clkrdy) {
+		ERR("Clock not ready after 20ms\n");
+		ret = -ENODEV;
+	}
+	return ret;
+}
+
+static void isp116x_stop(struct usb_hcd *hcd)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&isp116x->lock, flags);
+	isp116x_write_reg16(isp116x, HCuPINTENB, 0);
+
+	/* Switch off ports' power, some devices don't come up
+	   after next 'insmod' without this */
+	val = isp116x_read_reg32(isp116x, HCRHDESCA);
+	val &= ~(RH_A_NPS | RH_A_PSM);
+	isp116x_write_reg32(isp116x, HCRHDESCA, val);
+	isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPS);
+	spin_unlock_irqrestore(&isp116x->lock, flags);
+
+	/* Put the chip into reset state */
+	if (isp116x->board && isp116x->board->reset)
+		isp116x->board->reset(hcd->self.controller, 0);
+	else
+		isp116x_sw_reset(isp116x);
+
+	/* Stop the clock */
+	if (isp116x->board && isp116x->board->clock)
+		isp116x->board->clock(hcd->self.controller, 0);
+}
+
+/*
+  Configure the chip. The chip must be successfully reset by now.
+*/
+static int isp116x_start(struct usb_hcd *hcd)
+{
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	struct isp116x_platform_data *board = isp116x->board;
+	struct usb_device *udev;
+	u32 val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&isp116x->lock, flags);
+
+	/* clear interrupt status and disable all interrupt sources */
+	isp116x_write_reg16(isp116x, HCuPINT, 0xff);
+	isp116x_write_reg16(isp116x, HCuPINTENB, 0);
+
+	val = isp116x_read_reg16(isp116x, HCCHIPID);
+	if ((val & HCCHIPID_MASK) != HCCHIPID_MAGIC) {
+		ERR("Invalid chip ID %04x\n", val);
+		spin_unlock_irqrestore(&isp116x->lock, flags);
+		return -ENODEV;
+	}
+
+	isp116x_write_reg16(isp116x, HCITLBUFLEN, ISP116x_ITL_BUFSIZE);
+	isp116x_write_reg16(isp116x, HCATLBUFLEN, ISP116x_ATL_BUFSIZE);
+
+	/* ----- HW conf */
+	val = HCHWCFG_INT_ENABLE | HCHWCFG_DBWIDTH(1);
+	if (board->sel15Kres)
+		val |= HCHWCFG_15KRSEL;
+	/* Remote wakeup won't work without working clock */
+	if (board->clknotstop || board->remote_wakeup_enable)
+		val |= HCHWCFG_CLKNOTSTOP;
+	if (board->oc_enable)
+		val |= HCHWCFG_ANALOG_OC;
+	if (board->int_act_high)
+		val |= HCHWCFG_INT_POL;
+	if (board->int_edge_triggered)
+		val |= HCHWCFG_INT_TRIGGER;
+	isp116x_write_reg16(isp116x, HCHWCFG, val);
+
+	/* ----- Root hub conf */
+	val = 0;
+	/* AN10003_1.pdf recommends NPS to be always 1 */
+	if (board->no_power_switching)
+		val |= RH_A_NPS;
+	if (board->power_switching_mode)
+		val |= RH_A_PSM;
+	if (board->potpg)
+		val |= (board->potpg << 24) & RH_A_POTPGT;
+	else
+		val |= (25 << 24) & RH_A_POTPGT;
+	isp116x_write_reg32(isp116x, HCRHDESCA, val);
+	isp116x->rhdesca = isp116x_read_reg32(isp116x, HCRHDESCA);
+
+	val = RH_B_PPCM;
+	isp116x_write_reg32(isp116x, HCRHDESCB, val);
+	isp116x->rhdescb = isp116x_read_reg32(isp116x, HCRHDESCB);
+
+	val = 0;
+	if (board->remote_wakeup_enable) {
+		hcd->can_wakeup = 1;
+		val |= RH_HS_DRWE;
+	}
+	isp116x_write_reg32(isp116x, HCRHSTATUS, val);
+	isp116x->rhstatus = isp116x_read_reg32(isp116x, HCRHSTATUS);
+
+	isp116x_write_reg32(isp116x, HCFMINTVL, 0x27782edf);
+	spin_unlock_irqrestore(&isp116x->lock, flags);
+
+	udev = usb_alloc_dev(NULL, &hcd->self, 0);
+	if (!udev) {
+		isp116x_stop(hcd);
+		return -ENOMEM;
+	}
+
+	udev->speed = USB_SPEED_FULL;
+	hcd->state = HC_STATE_RUNNING;
+
+	if (usb_hcd_register_root_hub(udev, hcd) != 0) {
+		isp116x_stop(hcd);
+		usb_put_dev(udev);
+		return -ENODEV;
+	}
+
+	spin_lock_irqsave(&isp116x->lock, flags);
+	/* Set up interrupts */
+	isp116x->intenb = HCINT_MIE | HCINT_RHSC | HCINT_UE;
+	if (board->remote_wakeup_enable)
+		isp116x->intenb |= HCINT_RD;
+	isp116x->irqenb = HCuPINT_ATL | HCuPINT_OPR;	/* | HCuPINT_SUSP; */
+	isp116x_write_reg32(isp116x, HCINTENB, isp116x->intenb);
+	isp116x_write_reg16(isp116x, HCuPINTENB, isp116x->irqenb);
+
+	/* Go operational */
+	val = HCCONTROL_USB_OPER;
+	/* Remote wakeup connected - NOT SUPPORTED */
+	/*  if (board->remote_wakeup_connected)
+	   val |= HCCONTROL_RWC;  */
+	if (board->remote_wakeup_enable)
+		val |= HCCONTROL_RWE;
+	isp116x_write_reg32(isp116x, HCCONTROL, val);
+
+	/* Disable ports to avoid race in device enumeration */
+	isp116x_write_reg32(isp116x, HCRHPORT1, RH_PS_CCS);
+	isp116x_write_reg32(isp116x, HCRHPORT2, RH_PS_CCS);
+
+	isp116x_show_regs(isp116x);
+	spin_unlock_irqrestore(&isp116x->lock, flags);
+	return 0;
+}
+
+/*-----------------------------------------------------------------*/
+
+static struct hc_driver isp116x_hc_driver = {
+	.description = hcd_name,
+	.product_desc = "ISP116x Host Controller",
+	.hcd_priv_size = sizeof(struct isp116x),
+
+	.irq = isp116x_irq,
+	.flags = HCD_USB11,
+
+	.reset = isp116x_reset,
+	.start = isp116x_start,
+	.stop = isp116x_stop,
+
+	.urb_enqueue = isp116x_urb_enqueue,
+	.urb_dequeue = isp116x_urb_dequeue,
+	.endpoint_disable = isp116x_endpoint_disable,
+
+	.get_frame_number = isp116x_get_frame,
+
+	.hub_status_data = isp116x_hub_status_data,
+	.hub_control = isp116x_hub_control,
+	.hub_suspend = isp116x_hub_suspend,
+	.hub_resume = isp116x_hub_resume,
+};
+
+/*----------------------------------------------------------------*/
+
+static int __init_or_module isp116x_remove(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct isp116x *isp116x = hcd_to_isp116x(hcd);
+	struct platform_device *pdev;
+	struct resource *res;
+
+	pdev = container_of(dev, struct platform_device, dev);
+	remove_debug_file(isp116x);
+	usb_remove_hcd(hcd);
+
+	iounmap(isp116x->data_reg);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	release_mem_region(res->start, 2);
+	iounmap(isp116x->addr_reg);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, 2);
+
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+#define resource_len(r) (((r)->end - (r)->start) + 1)
+
+static int __init isp116x_probe(struct device *dev)
+{
+	struct usb_hcd *hcd;
+	struct isp116x *isp116x;
+	struct platform_device *pdev;
+	struct resource *addr, *data;
+	void __iomem *addr_reg;
+	void __iomem *data_reg;
+	int irq;
+	int ret = 0;
+
+	pdev = container_of(dev, struct platform_device, dev);
+	if (pdev->num_resources < 3) {
+		ret = -ENODEV;
+		goto err1;
+	}
+
+	data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	addr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	irq = platform_get_irq(pdev, 0);
+	if (!addr || !data || irq < 0) {
+		ret = -ENODEV;
+		goto err1;
+	}
+
+	if (dev->dma_mask) {
+		DBG("DMA not supported\n");
+		ret = -EINVAL;
+		goto err1;
+	}
+
+	if (!request_mem_region(addr->start, 2, hcd_name)) {
+		ret = -EBUSY;
+		goto err1;
+	}
+	addr_reg = ioremap(addr->start, resource_len(addr));
+	if (addr_reg == NULL) {
+		ret = -ENOMEM;
+		goto err2;
+	}
+	if (!request_mem_region(data->start, 2, hcd_name)) {
+		ret = -EBUSY;
+		goto err3;
+	}
+	data_reg = ioremap(data->start, resource_len(data));
+	if (data_reg == NULL) {
+		ret = -ENOMEM;
+		goto err4;
+	}
+
+	/* allocate and initialize hcd */
+	hcd = usb_create_hcd(&isp116x_hc_driver, dev, dev->bus_id);
+	if (!hcd) {
+		ret = -ENOMEM;
+		goto err5;
+	}
+	/* this rsrc_start is bogus */
+	hcd->rsrc_start = addr->start;
+	isp116x = hcd_to_isp116x(hcd);
+	isp116x->data_reg = data_reg;
+	isp116x->addr_reg = addr_reg;
+	spin_lock_init(&isp116x->lock);
+	INIT_LIST_HEAD(&isp116x->async);
+	INIT_WORK(&isp116x->rh_resume, isp116x_rh_resume, hcd);
+	isp116x->board = dev->platform_data;
+
+	if (!isp116x->board) {
+		ERR("Platform data structure not initialized\n");
+		ret = -ENODEV;
+		goto err6;
+	}
+	if (isp116x_check_platform_delay(isp116x)) {
+		ERR("USE_PLATFORM_DELAY defined, but delay function not "
+		    "implemented.\n");
+		ERR("See comments in drivers/usb/host/isp116x-hcd.c\n");
+		ret = -ENODEV;
+		goto err6;
+	}
+
+	ret = usb_add_hcd(hcd, irq, SA_INTERRUPT);
+	if (ret != 0)
+		goto err6;
+
+	create_debug_file(isp116x);
+	return 0;
+
+      err6:
+	usb_put_hcd(hcd);
+      err5:
+	iounmap(data_reg);
+      err4:
+	release_mem_region(data->start, 2);
+      err3:
+	iounmap(addr_reg);
+      err2:
+	release_mem_region(addr->start, 2);
+      err1:
+	ERR("init error, %d\n", ret);
+	return ret;
+}
+
+#ifdef	CONFIG_PM
+/*
+  Suspend of platform device
+*/
+static int isp116x_suspend(struct device *dev, pm_message_t state, u32 phase)
+{
+	int ret = 0;
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	VDBG("%s: state %x, phase %x\n", __func__, state, phase);
+
+	if (phase != SUSPEND_DISABLE && phase != SUSPEND_POWER_DOWN)
+		return 0;
+
+	ret = usb_suspend_device(hcd->self.root_hub, state);
+	if (!ret) {
+		dev->power.power_state = state;
+		INFO("%s suspended\n", (char *)hcd_name);
+	} else
+		ERR("%s suspend failed\n", (char *)hcd_name);
+
+	return ret;
+}
+
+/*
+  Resume platform device
+*/
+static int isp116x_resume(struct device *dev, u32 phase)
+{
+	int ret = 0;
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	VDBG("%s:  state %x, phase %x\n", __func__, dev->power.power_state,
+	     phase);
+	if (phase != RESUME_POWER_ON)
+		return 0;
+
+	ret = usb_resume_device(hcd->self.root_hub);
+	if (!ret) {
+		dev->power.power_state = PMSG_ON;
+		VDBG("%s resumed\n", (char *)hcd_name);
+	}
+	return ret;
+}
+
+#else
+
+#define	isp116x_suspend    NULL
+#define	isp116x_resume     NULL
+
+#endif
+
+static struct device_driver isp116x_driver = {
+	.name = (char *)hcd_name,
+	.bus = &platform_bus_type,
+	.probe = isp116x_probe,
+	.remove = isp116x_remove,
+	.suspend = isp116x_suspend,
+	.resume = isp116x_resume,
+};
+
+/*-----------------------------------------------------------------*/
+
+static int __init isp116x_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	INFO("driver %s, %s\n", hcd_name, DRIVER_VERSION);
+	return driver_register(&isp116x_driver);
+}
+
+module_init(isp116x_init);
+
+static void __exit isp116x_cleanup(void)
+{
+	driver_unregister(&isp116x_driver);
+}
+
+module_exit(isp116x_cleanup);
diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
new file mode 100644
index 000000000000..58873470dcf5
--- /dev/null
+++ b/drivers/usb/host/isp116x.h
@@ -0,0 +1,583 @@
+/*
+ * ISP116x register declarations and HCD data structures
+ *
+ * Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee>
+ * Portions:
+ * Copyright (C) 2004 Lothar Wassmann
+ * Copyright (C) 2004 Psion Teklogix
+ * Copyright (C) 2004 David Brownell
+ */
+
+/* us of 1ms frame */
+#define  MAX_LOAD_LIMIT		850
+
+/* Full speed: max # of bytes to transfer for a single urb
+   at a time must be < 1024 && must be multiple of 64.
+   832 allows transfering 4kiB within 5 frames. */
+#define MAX_TRANSFER_SIZE_FULLSPEED	832
+
+/* Low speed: there is no reason to schedule in very big
+   chunks; often the requested long transfers are for
+   string descriptors containing short strings. */
+#define MAX_TRANSFER_SIZE_LOWSPEED	64
+
+/* Bytetime (us), a rough indication of how much time it
+   would take to transfer a byte of useful data over USB */
+#define BYTE_TIME_FULLSPEED	1
+#define BYTE_TIME_LOWSPEED	20
+
+/* Buffer sizes */
+#define ISP116x_BUF_SIZE	4096
+#define ISP116x_ITL_BUFSIZE	0
+#define ISP116x_ATL_BUFSIZE	((ISP116x_BUF_SIZE) - 2*(ISP116x_ITL_BUFSIZE))
+
+#define ISP116x_WRITE_OFFSET	0x80
+
+/*------------ ISP116x registers/bits ------------*/
+#define	HCREVISION	0x00
+#define	HCCONTROL	0x01
+#define		HCCONTROL_HCFS	(3 << 6)	/* host controller
+						   functional state */
+#define		HCCONTROL_USB_RESET	(0 << 6)
+#define		HCCONTROL_USB_RESUME	(1 << 6)
+#define		HCCONTROL_USB_OPER	(2 << 6)
+#define		HCCONTROL_USB_SUSPEND	(3 << 6)
+#define		HCCONTROL_RWC	(1 << 9)	/* remote wakeup connected */
+#define		HCCONTROL_RWE	(1 << 10)	/* remote wakeup enable */
+#define	HCCMDSTAT	0x02
+#define		HCCMDSTAT_HCR	(1 << 0)	/* host controller reset */
+#define		HCCMDSTAT_SOC	(3 << 16)	/* scheduling overrun count */
+#define	HCINTSTAT	0x03
+#define		HCINT_SO	(1 << 0)	/* scheduling overrun */
+#define		HCINT_WDH	(1 << 1)	/* writeback of done_head */
+#define		HCINT_SF	(1 << 2)	/* start frame */
+#define		HCINT_RD	(1 << 3)	/* resume detect */
+#define		HCINT_UE	(1 << 4)	/* unrecoverable error */
+#define		HCINT_FNO	(1 << 5)	/* frame number overflow */
+#define		HCINT_RHSC	(1 << 6)	/* root hub status change */
+#define		HCINT_OC	(1 << 30)	/* ownership change */
+#define		HCINT_MIE	(1 << 31)	/* master interrupt enable */
+#define	HCINTENB	0x04
+#define	HCINTDIS	0x05
+#define	HCFMINTVL	0x0d
+#define	HCFMREM		0x0e
+#define	HCFMNUM		0x0f
+#define	HCLSTHRESH	0x11
+#define	HCRHDESCA	0x12
+#define		RH_A_NDP	(0x3 << 0)	/* # downstream ports */
+#define		RH_A_PSM	(1 << 8)	/* power switching mode */
+#define		RH_A_NPS	(1 << 9)	/* no power switching */
+#define		RH_A_DT		(1 << 10)	/* device type (mbz) */
+#define		RH_A_OCPM	(1 << 11)	/* overcurrent protection
+						   mode */
+#define		RH_A_NOCP	(1 << 12)	/* no overcurrent protection */
+#define		RH_A_POTPGT	(0xff << 24)	/* power on -> power good
+						   time */
+#define	HCRHDESCB	0x13
+#define		RH_B_DR		(0xffff << 0)	/* device removable flags */
+#define		RH_B_PPCM	(0xffff << 16)	/* port power control mask */
+#define	HCRHSTATUS	0x14
+#define		RH_HS_LPS	(1 << 0)	/* local power status */
+#define		RH_HS_OCI	(1 << 1)	/* over current indicator */
+#define		RH_HS_DRWE	(1 << 15)	/* device remote wakeup
+						   enable */
+#define		RH_HS_LPSC	(1 << 16)	/* local power status change */
+#define		RH_HS_OCIC	(1 << 17)	/* over current indicator
+						   change */
+#define		RH_HS_CRWE	(1 << 31)	/* clear remote wakeup
+						   enable */
+#define	HCRHPORT1	0x15
+#define		RH_PS_CCS	(1 << 0)	/* current connect status */
+#define		RH_PS_PES	(1 << 1)	/* port enable status */
+#define		RH_PS_PSS	(1 << 2)	/* port suspend status */
+#define		RH_PS_POCI	(1 << 3)	/* port over current
+						   indicator */
+#define		RH_PS_PRS	(1 << 4)	/* port reset status */
+#define		RH_PS_PPS	(1 << 8)	/* port power status */
+#define		RH_PS_LSDA	(1 << 9)	/* low speed device attached */
+#define		RH_PS_CSC	(1 << 16)	/* connect status change */
+#define		RH_PS_PESC	(1 << 17)	/* port enable status change */
+#define		RH_PS_PSSC	(1 << 18)	/* port suspend status
+						   change */
+#define		RH_PS_OCIC	(1 << 19)	/* over current indicator
+						   change */
+#define		RH_PS_PRSC	(1 << 20)	/* port reset status change */
+#define		HCRHPORT_CLRMASK	(0x1f << 16)
+#define	HCRHPORT2	0x16
+#define	HCHWCFG		0x20
+#define		HCHWCFG_15KRSEL		(1 << 12)
+#define		HCHWCFG_CLKNOTSTOP	(1 << 11)
+#define		HCHWCFG_ANALOG_OC	(1 << 10)
+#define		HCHWCFG_DACK_MODE	(1 << 8)
+#define		HCHWCFG_EOT_POL		(1 << 7)
+#define		HCHWCFG_DACK_POL	(1 << 6)
+#define		HCHWCFG_DREQ_POL	(1 << 5)
+#define		HCHWCFG_DBWIDTH_MASK	(0x03 << 3)
+#define		HCHWCFG_DBWIDTH(n)	(((n) << 3) & HCHWCFG_DBWIDTH_MASK)
+#define		HCHWCFG_INT_POL		(1 << 2)
+#define		HCHWCFG_INT_TRIGGER	(1 << 1)
+#define		HCHWCFG_INT_ENABLE	(1 << 0)
+#define	HCDMACFG	0x21
+#define		HCDMACFG_BURST_LEN_MASK	(0x03 << 5)
+#define		HCDMACFG_BURST_LEN(n)	(((n) << 5) & HCDMACFG_BURST_LEN_MASK)
+#define		HCDMACFG_BURST_LEN_1	HCDMACFG_BURST_LEN(0)
+#define		HCDMACFG_BURST_LEN_4	HCDMACFG_BURST_LEN(1)
+#define		HCDMACFG_BURST_LEN_8	HCDMACFG_BURST_LEN(2)
+#define		HCDMACFG_DMA_ENABLE	(1 << 4)
+#define		HCDMACFG_BUF_TYPE_MASK	(0x07 << 1)
+#define		HCDMACFG_CTR_SEL	(1 << 2)
+#define		HCDMACFG_ITLATL_SEL	(1 << 1)
+#define		HCDMACFG_DMA_RW_SELECT	(1 << 0)
+#define	HCXFERCTR	0x22
+#define	HCuPINT		0x24
+#define		HCuPINT_SOF		(1 << 0)
+#define		HCuPINT_ATL		(1 << 1)
+#define		HCuPINT_AIIEOT		(1 << 2)
+#define		HCuPINT_OPR		(1 << 4)
+#define		HCuPINT_SUSP		(1 << 5)
+#define		HCuPINT_CLKRDY		(1 << 6)
+#define	HCuPINTENB	0x25
+#define	HCCHIPID	0x27
+#define		HCCHIPID_MASK		0xff00
+#define		HCCHIPID_MAGIC		0x6100
+#define	HCSCRATCH	0x28
+#define	HCSWRES		0x29
+#define		HCSWRES_MAGIC		0x00f6
+#define	HCITLBUFLEN	0x2a
+#define	HCATLBUFLEN	0x2b
+#define	HCBUFSTAT	0x2c
+#define		HCBUFSTAT_ITL0_FULL	(1 << 0)
+#define		HCBUFSTAT_ITL1_FULL	(1 << 1)
+#define		HCBUFSTAT_ATL_FULL	(1 << 2)
+#define		HCBUFSTAT_ITL0_DONE	(1 << 3)
+#define		HCBUFSTAT_ITL1_DONE	(1 << 4)
+#define		HCBUFSTAT_ATL_DONE	(1 << 5)
+#define	HCRDITL0LEN	0x2d
+#define	HCRDITL1LEN	0x2e
+#define	HCITLPORT	0x40
+#define	HCATLPORT	0x41
+
+/* Philips transfer descriptor */
+struct ptd {
+	u16 count;
+#define	PTD_COUNT_MSK	(0x3ff << 0)
+#define	PTD_TOGGLE_MSK	(1 << 10)
+#define	PTD_ACTIVE_MSK	(1 << 11)
+#define	PTD_CC_MSK	(0xf << 12)
+	u16 mps;
+#define	PTD_MPS_MSK	(0x3ff << 0)
+#define	PTD_SPD_MSK	(1 << 10)
+#define	PTD_LAST_MSK	(1 << 11)
+#define	PTD_EP_MSK	(0xf << 12)
+	u16 len;
+#define	PTD_LEN_MSK	(0x3ff << 0)
+#define	PTD_DIR_MSK	(3 << 10)
+#define	PTD_DIR_SETUP	(0)
+#define	PTD_DIR_OUT	(1)
+#define	PTD_DIR_IN	(2)
+#define	PTD_B5_5_MSK	(1 << 13)
+	u16 faddr;
+#define	PTD_FA_MSK	(0x7f << 0)
+#define	PTD_FMT_MSK	(1 << 7)
+} __attribute__ ((packed, aligned(2)));
+
+/* PTD accessor macros. */
+#define PTD_GET_COUNT(p)	(((p)->count & PTD_COUNT_MSK) >> 0)
+#define PTD_COUNT(v)		(((v) << 0) & PTD_COUNT_MSK)
+#define PTD_GET_TOGGLE(p)	(((p)->count & PTD_TOGGLE_MSK) >> 10)
+#define PTD_TOGGLE(v)		(((v) << 10) & PTD_TOGGLE_MSK)
+#define PTD_GET_ACTIVE(p)	(((p)->count & PTD_ACTIVE_MSK) >> 11)
+#define PTD_ACTIVE(v)		(((v) << 11) & PTD_ACTIVE_MSK)
+#define PTD_GET_CC(p)		(((p)->count & PTD_CC_MSK) >> 12)
+#define PTD_CC(v)		(((v) << 12) & PTD_CC_MSK)
+#define PTD_GET_MPS(p)		(((p)->mps & PTD_MPS_MSK) >> 0)
+#define PTD_MPS(v)		(((v) << 0) & PTD_MPS_MSK)
+#define PTD_GET_SPD(p)		(((p)->mps & PTD_SPD_MSK) >> 10)
+#define PTD_SPD(v)		(((v) << 10) & PTD_SPD_MSK)
+#define PTD_GET_LAST(p)		(((p)->mps & PTD_LAST_MSK) >> 11)
+#define PTD_LAST(v)		(((v) << 11) & PTD_LAST_MSK)
+#define PTD_GET_EP(p)		(((p)->mps & PTD_EP_MSK) >> 12)
+#define PTD_EP(v)		(((v) << 12) & PTD_EP_MSK)
+#define PTD_GET_LEN(p)		(((p)->len & PTD_LEN_MSK) >> 0)
+#define PTD_LEN(v)		(((v) << 0) & PTD_LEN_MSK)
+#define PTD_GET_DIR(p)		(((p)->len & PTD_DIR_MSK) >> 10)
+#define PTD_DIR(v)		(((v) << 10) & PTD_DIR_MSK)
+#define PTD_GET_B5_5(p)		(((p)->len & PTD_B5_5_MSK) >> 13)
+#define PTD_B5_5(v)		(((v) << 13) & PTD_B5_5_MSK)
+#define PTD_GET_FA(p)		(((p)->faddr & PTD_FA_MSK) >> 0)
+#define PTD_FA(v)		(((v) << 0) & PTD_FA_MSK)
+#define PTD_GET_FMT(p)		(((p)->faddr & PTD_FMT_MSK) >> 7)
+#define PTD_FMT(v)		(((v) << 7) & PTD_FMT_MSK)
+
+/*  Hardware transfer status codes -- CC from ptd->count */
+#define TD_CC_NOERROR      0x00
+#define TD_CC_CRC          0x01
+#define TD_CC_BITSTUFFING  0x02
+#define TD_CC_DATATOGGLEM  0x03
+#define TD_CC_STALL        0x04
+#define TD_DEVNOTRESP      0x05
+#define TD_PIDCHECKFAIL    0x06
+#define TD_UNEXPECTEDPID   0x07
+#define TD_DATAOVERRUN     0x08
+#define TD_DATAUNDERRUN    0x09
+    /* 0x0A, 0x0B reserved for hardware */
+#define TD_BUFFEROVERRUN   0x0C
+#define TD_BUFFERUNDERRUN  0x0D
+    /* 0x0E, 0x0F reserved for HCD */
+#define TD_NOTACCESSED     0x0F
+
+/* map PTD status codes (CC) to errno values */
+static const int cc_to_error[16] = {
+	/* No  Error  */ 0,
+	/* CRC Error  */ -EILSEQ,
+	/* Bit Stuff  */ -EPROTO,
+	/* Data Togg  */ -EILSEQ,
+	/* Stall      */ -EPIPE,
+	/* DevNotResp */ -ETIMEDOUT,
+	/* PIDCheck   */ -EPROTO,
+	/* UnExpPID   */ -EPROTO,
+	/* DataOver   */ -EOVERFLOW,
+	/* DataUnder  */ -EREMOTEIO,
+	/* (for hw)   */ -EIO,
+	/* (for hw)   */ -EIO,
+	/* BufferOver */ -ECOMM,
+	/* BuffUnder  */ -ENOSR,
+	/* (for HCD)  */ -EALREADY,
+	/* (for HCD)  */ -EALREADY
+};
+
+/*--------------------------------------------------------------*/
+
+#define	LOG2_PERIODIC_SIZE	5	/* arbitrary; this matches OHCI */
+#define	PERIODIC_SIZE		(1 << LOG2_PERIODIC_SIZE)
+
+struct isp116x {
+	spinlock_t lock;
+	struct work_struct rh_resume;
+
+	void __iomem *addr_reg;
+	void __iomem *data_reg;
+
+	struct isp116x_platform_data *board;
+
+	struct proc_dir_entry *pde;
+	unsigned long stat1, stat2, stat4, stat8, stat16;
+
+	/* HC registers */
+	u32 intenb;		/* "OHCI" interrupts */
+	u16 irqenb;		/* uP interrupts */
+
+	/* Root hub registers */
+	u32 rhdesca;
+	u32 rhdescb;
+	u32 rhstatus;
+	u32 rhport[2];
+
+	/* async schedule: control, bulk */
+	struct list_head async;
+
+	/* periodic schedule: int */
+	u16 load[PERIODIC_SIZE];
+	struct isp116x_ep *periodic[PERIODIC_SIZE];
+	unsigned periodic_count;
+	u16 fmindex;
+
+	/* Schedule for the current frame */
+	struct isp116x_ep *atl_active;
+	int atl_buflen;
+	int atl_bufshrt;
+	int atl_last_dir;
+	atomic_t atl_finishing;
+};
+
+static inline struct isp116x *hcd_to_isp116x(struct usb_hcd *hcd)
+{
+	return (struct isp116x *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *isp116x_to_hcd(struct isp116x *isp116x)
+{
+	return container_of((void *)isp116x, struct usb_hcd, hcd_priv);
+}
+
+struct isp116x_ep {
+	struct usb_host_endpoint *hep;
+	struct usb_device *udev;
+	struct ptd ptd;
+
+	u8 maxpacket;
+	u8 epnum;
+	u8 nextpid;
+	u16 error_count;
+	u16 length;		/* of current packet */
+	unsigned char *data;	/* to databuf */
+	/* queue of active EP's (the ones scheduled for the
+	   current frame) */
+	struct isp116x_ep *active;
+
+	/* periodic schedule */
+	u16 period;
+	u16 branch;
+	u16 load;
+	struct isp116x_ep *next;
+
+	/* async schedule */
+	struct list_head schedule;
+};
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+#define DBG(stuff...)		printk(KERN_DEBUG "116x: " stuff)
+#else
+#define DBG(stuff...)		do{}while(0)
+#endif
+
+#ifdef VERBOSE
+#    define VDBG		DBG
+#else
+#    define VDBG(stuff...)	do{}while(0)
+#endif
+
+#define ERR(stuff...)		printk(KERN_ERR "116x: " stuff)
+#define WARN(stuff...)		printk(KERN_WARNING "116x: " stuff)
+#define INFO(stuff...)		printk(KERN_INFO "116x: " stuff)
+
+/* ------------------------------------------------- */
+
+#if defined(USE_PLATFORM_DELAY)
+#if defined(USE_NDELAY)
+#error USE_PLATFORM_DELAY and USE_NDELAY simultaneously defined.
+#endif
+#define	isp116x_delay(h,d)	(h)->board->delay(	\
+				isp116x_to_hcd(h)->self.controller,d)
+#define isp116x_check_platform_delay(h)	((h)->board->delay == NULL)
+#elif defined(USE_NDELAY)
+#define	isp116x_delay(h,d)	ndelay(d)
+#define isp116x_check_platform_delay(h)	0
+#else
+#define	isp116x_delay(h,d)	do{}while(0)
+#define isp116x_check_platform_delay(h)	0
+#endif
+
+#if defined(DEBUG)
+#define	IRQ_TEST()	BUG_ON(!irqs_disabled())
+#else
+#define	IRQ_TEST()	do{}while(0)
+#endif
+
+static inline void isp116x_write_addr(struct isp116x *isp116x, unsigned reg)
+{
+	IRQ_TEST();
+	writew(reg & 0xff, isp116x->addr_reg);
+	isp116x_delay(isp116x, 300);
+}
+
+static inline void isp116x_write_data16(struct isp116x *isp116x, u16 val)
+{
+	writew(val, isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+}
+
+static inline void isp116x_raw_write_data16(struct isp116x *isp116x, u16 val)
+{
+	__raw_writew(val, isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+}
+
+static inline u16 isp116x_read_data16(struct isp116x *isp116x)
+{
+	u16 val;
+
+	val = readw(isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+	return val;
+}
+
+static inline u16 isp116x_raw_read_data16(struct isp116x *isp116x)
+{
+	u16 val;
+
+	val = __raw_readw(isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+	return val;
+}
+
+static inline void isp116x_write_data32(struct isp116x *isp116x, u32 val)
+{
+	writew(val & 0xffff, isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+	writew(val >> 16, isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+}
+
+static inline u32 isp116x_read_data32(struct isp116x *isp116x)
+{
+	u32 val;
+
+	val = (u32) readw(isp116x->data_reg);
+	isp116x_delay(isp116x, 150);
+	val |= ((u32) readw(isp116x->data_reg)) << 16;
+	isp116x_delay(isp116x, 150);
+	return val;
+}
+
+/* Let's keep register access functions out of line. Hint:
+   we wait at least 150 ns at every access.
+*/
+static u16 isp116x_read_reg16(struct isp116x *isp116x, unsigned reg)
+{
+	isp116x_write_addr(isp116x, reg);
+	return isp116x_read_data16(isp116x);
+}
+
+static u32 isp116x_read_reg32(struct isp116x *isp116x, unsigned reg)
+{
+	isp116x_write_addr(isp116x, reg);
+	return isp116x_read_data32(isp116x);
+}
+
+static void isp116x_write_reg16(struct isp116x *isp116x, unsigned reg,
+				unsigned val)
+{
+	isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET);
+	isp116x_write_data16(isp116x, (u16) (val & 0xffff));
+}
+
+static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg,
+				unsigned val)
+{
+	isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET);
+	isp116x_write_data32(isp116x, (u32) val);
+}
+
+#define isp116x_show_reg(d,r) {					\
+	if ((r) < 0x20) {			                \
+		DBG("%-12s[%02x]: %08x\n", #r,			\
+			r, isp116x_read_reg32(d, r));		\
+	} else {						\
+		DBG("%-12s[%02x]:     %04x\n", #r,		\
+			r, isp116x_read_reg16(d, r));	    	\
+	}							\
+}
+
+static inline void isp116x_show_regs(struct isp116x *isp116x)
+{
+	isp116x_show_reg(isp116x, HCREVISION);
+	isp116x_show_reg(isp116x, HCCONTROL);
+	isp116x_show_reg(isp116x, HCCMDSTAT);
+	isp116x_show_reg(isp116x, HCINTSTAT);
+	isp116x_show_reg(isp116x, HCINTENB);
+	isp116x_show_reg(isp116x, HCFMINTVL);
+	isp116x_show_reg(isp116x, HCFMREM);
+	isp116x_show_reg(isp116x, HCFMNUM);
+	isp116x_show_reg(isp116x, HCLSTHRESH);
+	isp116x_show_reg(isp116x, HCRHDESCA);
+	isp116x_show_reg(isp116x, HCRHDESCB);
+	isp116x_show_reg(isp116x, HCRHSTATUS);
+	isp116x_show_reg(isp116x, HCRHPORT1);
+	isp116x_show_reg(isp116x, HCRHPORT2);
+	isp116x_show_reg(isp116x, HCHWCFG);
+	isp116x_show_reg(isp116x, HCDMACFG);
+	isp116x_show_reg(isp116x, HCXFERCTR);
+	isp116x_show_reg(isp116x, HCuPINT);
+	isp116x_show_reg(isp116x, HCuPINTENB);
+	isp116x_show_reg(isp116x, HCCHIPID);
+	isp116x_show_reg(isp116x, HCSCRATCH);
+	isp116x_show_reg(isp116x, HCITLBUFLEN);
+	isp116x_show_reg(isp116x, HCATLBUFLEN);
+	isp116x_show_reg(isp116x, HCBUFSTAT);
+	isp116x_show_reg(isp116x, HCRDITL0LEN);
+	isp116x_show_reg(isp116x, HCRDITL1LEN);
+}
+
+#if defined(URB_TRACE)
+
+#define PIPETYPE(pipe)  ({ char *__s;			\
+	if (usb_pipecontrol(pipe))	__s = "ctrl";	\
+	else if (usb_pipeint(pipe))	__s = "int";	\
+	else if (usb_pipebulk(pipe))	__s = "bulk";	\
+	else				__s = "iso";	\
+	__s;})
+#define PIPEDIR(pipe)   ({ usb_pipein(pipe) ? "in" : "out"; })
+#define URB_NOTSHORT(urb) ({ (urb)->transfer_flags & URB_SHORT_NOT_OK ? \
+	"short_not_ok" : ""; })
+
+/* print debug info about the URB */
+static void urb_dbg(struct urb *urb, char *msg)
+{
+	unsigned int pipe;
+
+	if (!urb) {
+		DBG("%s: zero urb\n", msg);
+		return;
+	}
+	pipe = urb->pipe;
+	DBG("%s: FA %d ep%d%s %s: len %d/%d %s\n", msg,
+	    usb_pipedevice(pipe), usb_pipeendpoint(pipe),
+	    PIPEDIR(pipe), PIPETYPE(pipe),
+	    urb->transfer_buffer_length, urb->actual_length, URB_NOTSHORT(urb));
+}
+
+#else
+
+#define  urb_dbg(urb,msg)   do{}while(0)
+
+#endif				/* ! defined(URB_TRACE) */
+
+#if defined(PTD_TRACE)
+
+#define PTD_DIR_STR(ptd)  ({char __c;		\
+	switch(PTD_GET_DIR(ptd)){		\
+	case 0:  __c = 's'; break;		\
+	case 1:  __c = 'o'; break;		\
+	default: __c = 'i'; break;		\
+	}; __c;})
+
+/*
+  Dump PTD info. The code documents the format
+  perfectly, right :)
+*/
+static inline void dump_ptd(struct ptd *ptd)
+{
+	printk("td: %x %d%c%d %d,%d,%d  %x %x%x%x\n",
+	       PTD_GET_CC(ptd), PTD_GET_FA(ptd),
+	       PTD_DIR_STR(ptd), PTD_GET_EP(ptd),
+	       PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd),
+	       PTD_GET_TOGGLE(ptd), PTD_GET_ACTIVE(ptd),
+	       PTD_GET_SPD(ptd), PTD_GET_LAST(ptd));
+}
+
+static inline void dump_ptd_out_data(struct ptd *ptd, u8 * buf)
+{
+	int k;
+
+	if (PTD_GET_DIR(ptd) != PTD_DIR_IN && PTD_GET_LEN(ptd)) {
+		printk("-> ");
+		for (k = 0; k < PTD_GET_LEN(ptd); ++k)
+			printk("%02x ", ((u8 *) buf)[k]);
+		printk("\n");
+	}
+}
+
+static inline void dump_ptd_in_data(struct ptd *ptd, u8 * buf)
+{
+	int k;
+
+	if (PTD_GET_DIR(ptd) == PTD_DIR_IN && PTD_GET_COUNT(ptd)) {
+		printk("<- ");
+		for (k = 0; k < PTD_GET_COUNT(ptd); ++k)
+			printk("%02x ", ((u8 *) buf)[k]);
+		printk("\n");
+	}
+	if (PTD_GET_LAST(ptd))
+		printk("-\n");
+}
+
+#else
+
+#define dump_ptd(ptd)               do{}while(0)
+#define dump_ptd_in_data(ptd,buf)   do{}while(0)
+#define dump_ptd_out_data(ptd,buf)  do{}while(0)
+
+#endif				/* ! defined(PTD_TRACE) */