Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (260 commits)
  usb: renesas_usbhs: fixup inconsistent return from usbhs_pkt_push()
  usb/isp1760: Allow to optionally trigger low-level chip reset via GPIOLIB.
  USB: gadget: midi: memory leak in f_midi_bind_config()
  USB: gadget: midi: fix range check in f_midi_out_open()
  QE/FHCI: fixed the CONTROL bug
  usb: renesas_usbhs: tidyup for smatch warnings
  USB: Fix USB Kconfig dependency problem on 85xx/QoirQ platforms
  EHCI: workaround for MosChip controller bug
  usb: gadget: file_storage: fix race on unloading
  USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers
  USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structure
  USB: ftdi_sio.c: Fill LSR fields of the ftdi async_icount structure
  USB: ftdi_sio.c:Fill TX field of the ftdi async_icount structure
  USB: ftdi_sio.c: Fill the RX field of the ftdi async_icount structure
  USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sio
  usb/isp1760: Let OF bindings depend on general CONFIG_OF instead of PPC_OF .
  USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board
  USB: Fix runtime wakeup on OHCI
  xHCI/USB: Make xHCI driver have a BOS descriptor.
  usb: gadget: add new usb gadget for ACM and mass storage
  ...

67 files changed, 3010 insertions, 646 deletions

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index ab085f12d570..060e0e2b1ae6 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -19,7 +19,7 @@ config USB_C67X00_HCD
 
 config USB_XHCI_HCD
 	tristate "xHCI HCD (USB 3.0) support (EXPERIMENTAL)"
-	depends on USB && PCI && EXPERIMENTAL
+	depends on USB && USB_ARCH_HAS_XHCI && EXPERIMENTAL
 	---help---
 	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
 	  "SuperSpeed" host controller hardware.
@@ -515,6 +515,19 @@ config USB_R8A66597_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called r8a66597-hcd.
 
+config USB_RENESAS_USBHS_HCD
+	tristate "Renesas USBHS HCD support"
+	depends on USB
+	depends on USB_RENESAS_USBHS
+	help
+	  The Renesas USBHS is a USB 2.0 host and peripheral controller.
+
+	  Enable this option if your board has this chip, and you want
+	  to use it as a host controller.  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called renesas-usbhs.
+
 config USB_WHCI_HCD
 	tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
@@ -544,11 +557,11 @@ config USB_HWA_HCD
 	  will be called "hwa-hc".
 
 config USB_IMX21_HCD
-       tristate "iMX21 HCD support"
-       depends on USB && ARM && MACH_MX21
+       tristate "i.MX21 HCD support"
+       depends on USB && ARM && ARCH_MXC
        help
          This driver enables support for the on-chip USB host in the
-         iMX21 processor.
+         i.MX21 processor.
 
          To compile this driver as a module, choose M here: the
          module will be called "imx21-hcd".
@@ -578,3 +591,10 @@ config USB_OCTEON_OHCI
 config USB_OCTEON2_COMMON
 	bool
 	default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
+
+config USB_PXA168_EHCI
+	bool "Marvell PXA168 on-chip EHCI HCD support"
+	depends on USB_EHCI_HCD && ARCH_MMP
+	help
+	  Enable support for Marvell PXA168 SoC's on-chip EHCI
+	  host controller
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 624a362f2fee..ed48a5d79e16 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -11,8 +11,9 @@ fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o
 
 fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o
 
-xhci-hcd-y := xhci.o xhci-mem.o xhci-pci.o
+xhci-hcd-y := xhci.o xhci-mem.o
 xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
+xhci-hcd-$(CONFIG_PCI)	+= xhci-pci.o
 
 obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
 
diff --git a/drivers/usb/host/ehci-ath79.c b/drivers/usb/host/ehci-ath79.c
index 4d2e88d04dab..afb6743cf094 100644
--- a/drivers/usb/host/ehci-ath79.c
+++ b/drivers/usb/host/ehci-ath79.c
@@ -163,7 +163,7 @@ static int ehci_ath79_probe(struct platform_device *pdev)
 		goto err_release_region;
 	}
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret)
 		goto err_iounmap;
 
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 42ae57409908..65719e8d24e4 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -181,7 +181,7 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 	ehci->hcs_params = readl(&ehci->caps->hcs_params);
 
 	ret = usb_add_hcd(hcd, pdev->resource[1].start,
-			  IRQF_DISABLED | IRQF_SHARED);
+			  IRQF_SHARED);
 	if (ret == 0) {
 		platform_set_drvdata(pdev, hcd);
 		return ret;
@@ -293,7 +293,7 @@ static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
 	/* here we "know" root ports should always stay powered */
 	ehci_port_power(ehci, 1);
 
-	hcd->state = HC_STATE_SUSPENDED;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
 
 	return 0;
 }
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 40a844c1dbb4..d6d74d2e09f4 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -697,6 +697,19 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
 }
 #undef DBG_SCHED_LIMIT
 
+static const char *rh_state_string(struct ehci_hcd *ehci)
+{
+	switch (ehci->rh_state) {
+	case EHCI_RH_HALTED:
+		return "halted";
+	case EHCI_RH_SUSPENDED:
+		return "suspended";
+	case EHCI_RH_RUNNING:
+		return "running";
+	}
+	return "?";
+}
+
 static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 {
 	struct usb_hcd		*hcd;
@@ -730,11 +743,11 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 	temp = scnprintf (next, size,
 		"bus %s, device %s\n"
 		"%s\n"
-		"EHCI %x.%02x, hcd state %d\n",
+		"EHCI %x.%02x, rh state %s\n",
 		hcd->self.controller->bus->name,
 		dev_name(hcd->self.controller),
 		hcd->product_desc,
-		i >> 8, i & 0x0ff, hcd->state);
+		i >> 8, i & 0x0ff, rh_state_string(ehci));
 	size -= temp;
 	next += temp;
 
@@ -808,7 +821,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 	next += temp;
 
 	temp = scnprintf (next, size, "uframe %04x\n",
-			ehci_readl(ehci, &ehci->regs->frame_index));
+			ehci_read_frame_index(ehci));
 	size -= temp;
 	next += temp;
 
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 34a3140d1e5f..e90344a17631 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -134,7 +134,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
 
 	/* Don't need to set host mode here. It will be done by tdi_reset() */
 
-	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (retval != 0)
 		goto err4;
 
@@ -392,7 +392,7 @@ static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
 
 	dev_dbg(dev, "suspending...\n");
 
-	hcd->state = HC_STATE_SUSPENDED;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
 	dev->power.power_state = PMSG_SUSPEND;
 
 	/* ignore non-host interrupts */
@@ -481,7 +481,7 @@ static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
 	ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
 
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-	hcd->state = HC_STATE_RUNNING;
+	ehci->rh_state = EHCI_RH_RUNNING;
 	dev->power.power_state = PMSG_ON;
 
 	tmp = ehci_readl(ehci, &ehci->regs->command);
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index f72ae0b6ee7f..59e81615e09c 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -95,7 +95,7 @@ static const char	hcd_name [] = "ehci_hcd";
 #define EHCI_IO_JIFFIES		(HZ/10)		/* io watchdog > irq_thresh */
 #define EHCI_ASYNC_JIFFIES	(HZ/20)		/* async idle timeout */
 #define EHCI_SHRINK_JIFFIES	(DIV_ROUND_UP(HZ, 200) + 1)
-						/* 200-ms async qh unlink delay */
+						/* 5-ms async qh unlink delay */
 
 /* Initial IRQ latency:  faster than hw default */
 static int log2_irq_thresh = 0;		// 0 to 6
@@ -238,7 +238,7 @@ static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
 	error = handshake(ehci, ptr, mask, done, usec);
 	if (error) {
 		ehci_halt(ehci);
-		ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+		ehci->rh_state = EHCI_RH_HALTED;
 		ehci_err(ehci, "force halt; handshake %p %08x %08x -> %d\n",
 			ptr, mask, done, error);
 	}
@@ -278,7 +278,7 @@ static int ehci_reset (struct ehci_hcd *ehci)
 	command |= CMD_RESET;
 	dbg_cmd (ehci, "reset", command);
 	ehci_writel(ehci, command, &ehci->regs->command);
-	ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+	ehci->rh_state = EHCI_RH_HALTED;
 	ehci->next_statechange = jiffies;
 	retval = handshake (ehci, &ehci->regs->command,
 			    CMD_RESET, 0, 250 * 1000);
@@ -307,7 +307,7 @@ static void ehci_quiesce (struct ehci_hcd *ehci)
 	u32	temp;
 
 #ifdef DEBUG
-	if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
+	if (ehci->rh_state != EHCI_RH_RUNNING)
 		BUG ();
 #endif
 
@@ -356,7 +356,7 @@ static void ehci_iaa_watchdog(unsigned long param)
 	 */
 	if (ehci->reclaim
 			&& !timer_pending(&ehci->iaa_watchdog)
-			&& HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
+			&& ehci->rh_state == EHCI_RH_RUNNING) {
 		u32 cmd, status;
 
 		/* If we get here, IAA is *REALLY* late.  It's barely
@@ -496,7 +496,7 @@ static void ehci_work (struct ehci_hcd *ehci)
 	 * misplace IRQs, and should let us run completely without IRQs.
 	 * such lossage has been observed on both VT6202 and VT8235.
 	 */
-	if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) &&
+	if (ehci->rh_state == EHCI_RH_RUNNING &&
 			(ehci->async->qh_next.ptr != NULL ||
 			 ehci->periodic_sched != 0))
 		timer_action (ehci, TIMER_IO_WATCHDOG);
@@ -516,7 +516,7 @@ static void ehci_stop (struct usb_hcd *hcd)
 	del_timer_sync(&ehci->iaa_watchdog);
 
 	spin_lock_irq(&ehci->lock);
-	if (HC_IS_RUNNING (hcd->state))
+	if (ehci->rh_state == EHCI_RH_RUNNING)
 		ehci_quiesce (ehci);
 
 	ehci_silence_controller(ehci);
@@ -741,7 +741,7 @@ static int ehci_run (struct usb_hcd *hcd)
 	 * be started before the port switching actions could complete.
 	 */
 	down_write(&ehci_cf_port_reset_rwsem);
-	hcd->state = HC_STATE_RUNNING;
+	ehci->rh_state = EHCI_RH_RUNNING;
 	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
 	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
 	msleep(5);
@@ -768,6 +768,35 @@ static int ehci_run (struct usb_hcd *hcd)
 	return 0;
 }
 
+static int __maybe_unused ehci_setup (struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+
+	ehci->regs = (void __iomem *)ehci->caps +
+	    HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	ehci->sbrn = HCD_USB2;
+
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	/* data structure init */
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	ehci_reset(ehci);
+
+	return 0;
+}
+
 /*-------------------------------------------------------------------------*/
 
 static irqreturn_t ehci_irq (struct usb_hcd *hcd)
@@ -788,7 +817,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 
 	/* Shared IRQ? */
 	masked_status = status & INTR_MASK;
-	if (!masked_status || unlikely(hcd->state == HC_STATE_HALT)) {
+	if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) {
 		spin_unlock(&ehci->lock);
 		return IRQ_NONE;
 	}
@@ -952,7 +981,7 @@ static int ehci_urb_enqueue (
 static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 {
 	/* failfast */
-	if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state) && ehci->reclaim)
+	if (ehci->rh_state != EHCI_RH_RUNNING && ehci->reclaim)
 		end_unlink_async(ehci);
 
 	/* If the QH isn't linked then there's nothing we can do
@@ -1079,7 +1108,7 @@ rescan:
 		goto idle_timeout;
 	}
 
-	if (!HC_IS_RUNNING (hcd->state))
+	if (ehci->rh_state != EHCI_RH_RUNNING)
 		qh->qh_state = QH_STATE_IDLE;
 	switch (qh->qh_state) {
 	case QH_STATE_LINKED:
@@ -1166,8 +1195,7 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
 static int ehci_get_frame (struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
-	return (ehci_readl(ehci, &ehci->regs->frame_index) >> 3) %
-		ehci->periodic_size;
+	return (ehci_read_frame_index(ehci) >> 3) % ehci->periodic_size;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1291,6 +1319,16 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_grlib_driver
 #endif
 
+#ifdef CONFIG_USB_PXA168_EHCI
+#include "ehci-pxa168.c"
+#define PLATFORM_DRIVER		ehci_pxa168_driver
+#endif
+
+#ifdef CONFIG_NLM_XLR
+#include "ehci-xls.c"
+#define PLATFORM_DRIVER		ehci_xls_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
     !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 4c32cb19b405..77bbb2357e47 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -236,10 +236,8 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	}
 
 	/* stop schedules, clean any completed work */
-	if (HC_IS_RUNNING(hcd->state)) {
+	if (ehci->rh_state == EHCI_RH_RUNNING)
 		ehci_quiesce (ehci);
-		hcd->state = HC_STATE_QUIESCING;
-	}
 	ehci->command = ehci_readl(ehci, &ehci->regs->command);
 	ehci_work(ehci);
 
@@ -313,7 +311,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 
 	/* turn off now-idle HC */
 	ehci_halt (ehci);
-	hcd->state = HC_STATE_SUSPENDED;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
 
 	if (ehci->reclaim)
 		end_unlink_async(ehci);
@@ -382,6 +380,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 
 	/* restore CMD_RUN, framelist size, and irq threshold */
 	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	ehci->rh_state = EHCI_RH_RUNNING;
 
 	/* Some controller/firmware combinations need a delay during which
 	 * they set up the port statuses.  See Bugzilla #8190. */
@@ -451,7 +450,6 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 	}
 
 	ehci->next_statechange = jiffies + msecs_to_jiffies(5);
-	hcd->state = HC_STATE_RUNNING;
 
 	/* Now we can safely re-enable irqs */
 	ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
@@ -563,7 +561,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 	u32		ppcd = 0;
 
 	/* if !USB_SUSPEND, root hub timers won't get shut down ... */
-	if (!HC_IS_RUNNING(hcd->state))
+	if (ehci->rh_state != EHCI_RH_RUNNING)
 		return 0;
 
 	/* init status to no-changes */
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 555a73c864b5..55978fcfa4b2 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -236,7 +236,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 	priv->hcd = hcd;
 	platform_set_drvdata(pdev, priv);
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret)
 		goto err_add;
 
diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c
index c3ba3ed5f3a6..ba1f51361134 100644
--- a/drivers/usb/host/ehci-octeon.c
+++ b/drivers/usb/host/ehci-octeon.c
@@ -155,7 +155,7 @@ static int ehci_octeon_drv_probe(struct platform_device *pdev)
 	/* cache this readonly data; minimize chip reads */
 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret) {
 		dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
 		goto err3;
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 45240321ca09..e39b0297bad1 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -228,7 +228,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 	/* cache this readonly data; minimize chip reads */
 	omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params);
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret) {
 		dev_err(dev, "failed to add hcd with err %d\n", ret);
 		goto err_add_hcd;
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 395bdb0248d5..a68a2a5c4b83 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -277,7 +277,7 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
 		printk(KERN_WARNING "Orion ehci -USB phy version isn't supported.\n");
 	}
 
-	err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (err)
 		goto err4;
 
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 1102ce65a3a9..f4b627d343ac 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -224,6 +224,11 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			pci_dev_put(p_smbus);
 		}
 		break;
+	case PCI_VENDOR_ID_NETMOS:
+		/* MosChip frame-index-register bug */
+		ehci_info(ehci, "applying MosChip frame-index workaround\n");
+		ehci->frame_index_bug = 1;
+		break;
 	}
 
 	/* optional debug port, normally in the first BAR */
@@ -439,7 +444,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 	/* here we "know" root ports should always stay powered */
 	ehci_port_power(ehci, 1);
 
-	hcd->state = HC_STATE_SUSPENDED;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
 	return 0;
 }
 #endif
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 64626a777d61..2dc32da75cfc 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -167,7 +167,7 @@ static int __devinit ps3_ehci_probe(struct ps3_system_bus_device *dev)
 
 	ps3_system_bus_set_drvdata(dev, hcd);
 
-	result = usb_add_hcd(hcd, virq, IRQF_DISABLED);
+	result = usb_add_hcd(hcd, virq, 0);
 
 	if (result) {
 		dev_dbg(&dev->core, "%s:%d: usb_add_hcd failed (%d)\n",
diff --git a/drivers/usb/host/ehci-pxa168.c b/drivers/usb/host/ehci-pxa168.c
new file mode 100644
index 000000000000..ac0c16e8f539
--- /dev/null
+++ b/drivers/usb/host/ehci-pxa168.c
@@ -0,0 +1,363 @@
+/*
+ * drivers/usb/host/ehci-pxa168.c
+ *
+ * Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
+ *
+ * Based on drivers/usb/host/ehci-orion.c
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <mach/pxa168.h>
+
+#define USB_PHY_CTRL_REG 0x4
+#define USB_PHY_PLL_REG  0x8
+#define USB_PHY_TX_REG   0xc
+
+#define FBDIV_SHIFT      4
+
+#define ICP_SHIFT        12
+#define ICP_15            2
+#define ICP_20            3
+#define ICP_25            4
+
+#define KVCO_SHIFT       15
+
+#define PLLCALI12_SHIFT  25
+#define CALI12_VDD        0
+#define CALI12_09         1
+#define CALI12_10         2
+#define CALI12_11         3
+
+#define PLLVDD12_SHIFT   27
+#define VDD12_VDD         0
+#define VDD12_10          1
+#define VDD12_11          2
+#define VDD12_12          3
+
+#define PLLVDD18_SHIFT   29
+#define VDD18_19          0
+#define VDD18_20          1
+#define VDD18_21          2
+#define VDD18_22          3
+
+
+#define PLL_READY        (1 << 23)
+#define VCOCAL_START     (1 << 21)
+#define REG_RCAL_START   (1 << 12)
+
+struct pxa168_usb_drv_data {
+	struct ehci_hcd ehci;
+	struct clk	*pxa168_usb_clk;
+	struct resource	*usb_phy_res;
+	void __iomem	*usb_phy_reg_base;
+};
+
+static int ehci_pxa168_setup(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+
+	ehci_reset(ehci);
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	/*
+	 * data structure init
+	 */
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	hcd->has_tt = 1;
+
+	ehci_port_power(ehci, 0);
+
+	return retval;
+}
+
+static const struct hc_driver ehci_pxa168_hc_driver = {
+	.description = hcd_name,
+	.product_desc = "Marvell PXA168 EHCI",
+	.hcd_priv_size = sizeof(struct pxa168_usb_drv_data),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq = ehci_irq,
+	.flags = HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset = ehci_pxa168_setup,
+	.start = ehci_run,
+	.stop = ehci_stop,
+	.shutdown = ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue = ehci_urb_enqueue,
+	.urb_dequeue = ehci_urb_dequeue,
+	.endpoint_disable = ehci_endpoint_disable,
+	.endpoint_reset = ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number = ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data = ehci_hub_status_data,
+	.hub_control = ehci_hub_control,
+	.bus_suspend = ehci_bus_suspend,
+	.bus_resume = ehci_bus_resume,
+	.relinquish_port = ehci_relinquish_port,
+	.port_handed_over = ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int pxa168_usb_phy_init(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *usb_phy_reg_base;
+	struct pxa168_usb_pdata *pdata;
+	struct pxa168_usb_drv_data *drv_data;
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	unsigned long reg_val;
+	int pll_retry_cont = 10000, err = 0;
+
+	drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv;
+	pdata = (struct pxa168_usb_pdata *)pdev->dev.platform_data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Found HC with no PHY register addr. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res),
+				ehci_pxa168_hc_driver.description)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		return -EBUSY;
+	}
+
+	usb_phy_reg_base = ioremap(res->start, resource_size(res));
+	if (usb_phy_reg_base == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		err = -EFAULT;
+		goto err1;
+	}
+	drv_data->usb_phy_reg_base = usb_phy_reg_base;
+	drv_data->usb_phy_res = res;
+
+	/* If someone wants to init USB phy in board specific way */
+	if (pdata && pdata->phy_init)
+		return pdata->phy_init(usb_phy_reg_base);
+
+	/* Power up the PHY and PLL */
+	writel(readl(usb_phy_reg_base + USB_PHY_CTRL_REG) | 0x3,
+		usb_phy_reg_base + USB_PHY_CTRL_REG);
+
+	/* Configure PHY PLL */
+	reg_val = readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~(0x7e03ffff);
+	reg_val |= (VDD18_22 << PLLVDD18_SHIFT | VDD12_12 << PLLVDD12_SHIFT |
+		CALI12_11 << PLLCALI12_SHIFT | 3 << KVCO_SHIFT |
+		ICP_15 << ICP_SHIFT | 0xee << FBDIV_SHIFT | 0xb);
+	writel(reg_val, usb_phy_reg_base + USB_PHY_PLL_REG);
+
+	/* Make sure PHY PLL is ready */
+	while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) {
+		if (!(pll_retry_cont--)) {
+			dev_dbg(&pdev->dev, "USB PHY PLL not ready\n");
+			err = -EIO;
+			goto err2;
+		}
+	}
+
+	/* Toggle VCOCAL_START bit of U2PLL for PLL calibration */
+	udelay(200);
+	writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) | VCOCAL_START,
+		usb_phy_reg_base + USB_PHY_PLL_REG);
+	udelay(40);
+	writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~VCOCAL_START,
+		usb_phy_reg_base + USB_PHY_PLL_REG);
+
+	/* Toggle REG_RCAL_START bit of U2PTX for impedance calibration */
+	udelay(400);
+	writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) | REG_RCAL_START,
+		usb_phy_reg_base + USB_PHY_TX_REG);
+	udelay(40);
+	writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) & ~REG_RCAL_START,
+		usb_phy_reg_base + USB_PHY_TX_REG);
+
+	/* Make sure PHY PLL is ready again */
+	pll_retry_cont = 0;
+	while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) {
+		if (!(pll_retry_cont--)) {
+			dev_dbg(&pdev->dev, "USB PHY PLL not ready\n");
+			err = -EIO;
+			goto err2;
+		}
+	}
+
+	return 0;
+err2:
+	iounmap(usb_phy_reg_base);
+err1:
+	release_mem_region(res->start, resource_size(res));
+	return err;
+}
+
+static int __devinit ehci_pxa168_drv_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct usb_hcd *hcd;
+	struct ehci_hcd *ehci;
+	struct pxa168_usb_drv_data *drv_data;
+	void __iomem *regs;
+	int irq, err = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_debug("Initializing pxa168-SoC USB Host Controller\n");
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(&pdev->dev,
+			"Found HC with no IRQ. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		err = -ENODEV;
+		goto err1;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Found HC with no register addr. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		err = -ENODEV;
+		goto err1;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res),
+				ehci_pxa168_hc_driver.description)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		err = -EBUSY;
+		goto err1;
+	}
+
+	regs = ioremap(res->start, resource_size(res));
+	if (regs == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		err = -EFAULT;
+		goto err2;
+	}
+
+	hcd = usb_create_hcd(&ehci_pxa168_hc_driver,
+			&pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		err = -ENOMEM;
+		goto err3;
+	}
+
+	drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv;
+
+	/* Enable USB clock */
+	drv_data->pxa168_usb_clk = clk_get(&pdev->dev, "PXA168-USBCLK");
+	if (IS_ERR(drv_data->pxa168_usb_clk)) {
+		dev_err(&pdev->dev, "Couldn't get USB clock\n");
+		err = PTR_ERR(drv_data->pxa168_usb_clk);
+		goto err4;
+	}
+	clk_enable(drv_data->pxa168_usb_clk);
+
+	err = pxa168_usb_phy_init(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "USB PHY initialization failed\n");
+		goto err5;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+	hcd->regs = regs;
+
+	ehci = hcd_to_ehci(hcd);
+	ehci->caps = hcd->regs + 0x100;
+	ehci->regs = hcd->regs + 0x100 +
+		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+	hcd->has_tt = 1;
+	ehci->sbrn = 0x20;
+
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
+	if (err)
+		goto err5;
+
+	return 0;
+
+err5:
+	clk_disable(drv_data->pxa168_usb_clk);
+	clk_put(drv_data->pxa168_usb_clk);
+err4:
+	usb_put_hcd(hcd);
+err3:
+	iounmap(regs);
+err2:
+	release_mem_region(res->start, resource_size(res));
+err1:
+	dev_err(&pdev->dev, "init %s fail, %d\n",
+		dev_name(&pdev->dev), err);
+
+	return err;
+}
+
+static int __exit ehci_pxa168_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct pxa168_usb_drv_data *drv_data =
+		(struct pxa168_usb_drv_data *)hcd->hcd_priv;
+
+	usb_remove_hcd(hcd);
+
+	/* Power down PHY & PLL */
+	writel(readl(drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG) & (~0x3),
+		drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG);
+
+	clk_disable(drv_data->pxa168_usb_clk);
+	clk_put(drv_data->pxa168_usb_clk);
+
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+	iounmap(drv_data->usb_phy_reg_base);
+	release_mem_region(drv_data->usb_phy_res->start,
+			resource_size(drv_data->usb_phy_res));
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:pxa168-ehci");
+
+static struct platform_driver ehci_pxa168_driver = {
+	.probe		= ehci_pxa168_drv_probe,
+	.remove		= __exit_p(ehci_pxa168_drv_remove),
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver.name	= "pxa168-ehci",
+};
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 0917e3a32465..4e4066c35a09 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -111,8 +111,6 @@ qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd)
 		}
 	}
 
-	/* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
-	wmb ();
 	hw->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
 }
 
@@ -153,7 +151,7 @@ static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd,
 	spin_lock_irqsave(&ehci->lock, flags);
 	qh->clearing_tt = 0;
 	if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list)
-			&& HC_IS_RUNNING(hcd->state))
+			&& ehci->rh_state == EHCI_RH_RUNNING)
 		qh_link_async(ehci, qh);
 	spin_unlock_irqrestore(&ehci->lock, flags);
 }
@@ -425,7 +423,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 		/* stop scanning when we reach qtds the hc is using */
 		} else if (likely (!stopped
-				&& HC_IS_RUNNING (ehci_to_hcd(ehci)->state))) {
+				&& ehci->rh_state == EHCI_RH_RUNNING)) {
 			break;
 
 		/* scan the whole queue for unlinks whenever it stops */
@@ -433,7 +431,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 			stopped = 1;
 
 			/* cancel everything if we halt, suspend, etc */
-			if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state))
+			if (ehci->rh_state != EHCI_RH_RUNNING)
 				last_status = -ESHUTDOWN;
 
 			/* this qtd is active; skip it unless a previous qtd
@@ -724,7 +722,8 @@ qh_urb_transaction (
 
 	/*
 	 * control requests may need a terminating data "status" ack;
-	 * bulk ones may need a terminating short packet (zero length).
+	 * other OUT ones may need a terminating short packet
+	 * (zero length).
 	 */
 	if (likely (urb->transfer_buffer_length != 0)) {
 		int	one_more = 0;
@@ -733,7 +732,7 @@ qh_urb_transaction (
 			one_more = 1;
 			token ^= 0x0100;	/* "in" <--> "out"  */
 			token |= QTD_TOGGLE;	/* force DATA1 */
-		} else if (usb_pipebulk (urb->pipe)
+		} else if (usb_pipeout(urb->pipe)
 				&& (urb->transfer_flags & URB_ZERO_PACKET)
 				&& !(urb->transfer_buffer_length % maxpacket)) {
 			one_more = 1;
@@ -977,9 +976,8 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 			/* in case a clear of CMD_ASE didn't take yet */
 			(void)handshake(ehci, &ehci->regs->status,
 					STS_ASS, 0, 150);
-			cmd |= CMD_ASE | CMD_RUN;
+			cmd |= CMD_ASE;
 			ehci_writel(ehci, cmd, &ehci->regs->command);
-			ehci_to_hcd(ehci)->state = HC_STATE_RUNNING;
 			/* posted write need not be known to HC yet ... */
 		}
 	}
@@ -1058,7 +1056,7 @@ static struct ehci_qh *qh_append_tds (
 			 */
 			token = qtd->hw_token;
 			qtd->hw_token = HALT_BIT(ehci);
-			wmb ();
+
 			dummy = qh->dummy;
 
 			dma = dummy->qtd_dma;
@@ -1168,14 +1166,13 @@ static void end_unlink_async (struct ehci_hcd *ehci)
 
 	qh_completions (ehci, qh);
 
-	if (!list_empty (&qh->qtd_list)
-			&& HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
+	if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) {
 		qh_link_async (ehci, qh);
-	else {
+	} else {
 		/* it's not free to turn the async schedule on/off; leave it
 		 * active but idle for a while once it empties.
 		 */
-		if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state)
+		if (ehci->rh_state == EHCI_RH_RUNNING
 				&& ehci->async->qh_next.qh == NULL)
 			timer_action (ehci, TIMER_ASYNC_OFF);
 	}
@@ -1211,7 +1208,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	/* stop async schedule right now? */
 	if (unlikely (qh == ehci->async)) {
 		/* can't get here without STS_ASS set */
-		if (ehci_to_hcd(ehci)->state != HC_STATE_HALT
+		if (ehci->rh_state != EHCI_RH_HALTED
 				&& !ehci->reclaim) {
 			/* ... and CMD_IAAD clear */
 			ehci_writel(ehci, cmd & ~CMD_ASE,
@@ -1237,7 +1234,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	wmb ();
 
 	/* If the controller isn't running, we don't have to wait for it */
-	if (unlikely(!HC_IS_RUNNING(ehci_to_hcd(ehci)->state))) {
+	if (unlikely(ehci->rh_state != EHCI_RH_RUNNING)) {
 		/* if (unlikely (qh->reclaim != 0))
 		 *	this will recurse, probably not much
 		 */
@@ -1260,7 +1257,7 @@ static void scan_async (struct ehci_hcd *ehci)
 	enum ehci_timer_action	action = TIMER_IO_WATCHDOG;
 
 	timer_action_done (ehci, TIMER_ASYNC_SHRINK);
-	stopped = !HC_IS_RUNNING(ehci_to_hcd(ehci)->state);
+	stopped = (ehci->rh_state != EHCI_RH_RUNNING);
 
 	ehci->qh_scan_next = ehci->async->qh_next.qh;
 	while (ehci->qh_scan_next) {
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 9e77f1c8bdbd..024b65c4990d 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -136,7 +136,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev)
 	/* cache this readonly data; minimize chip reads */
 	ehci->hcs_params = readl(&ehci->caps->hcs_params);
 
-	err = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to add USB HCD\n");
 		goto fail;
@@ -270,7 +270,7 @@ static int s5p_ehci_resume(struct device *dev)
 	/* here we "know" root ports should always stay powered */
 	ehci_port_power(ehci, 1);
 
-	hcd->state = HC_STATE_SUSPENDED;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
 
 	return 0;
 }
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 2abf8543f083..2e829fae6482 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -36,6 +36,27 @@
 
 static int ehci_get_frame (struct usb_hcd *hcd);
 
+#ifdef CONFIG_PCI
+
+static unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
+{
+	unsigned uf;
+
+	/*
+	 * The MosChip MCS9990 controller updates its microframe counter
+	 * a little before the frame counter, and occasionally we will read
+	 * the invalid intermediate value.  Avoid problems by checking the
+	 * microframe number (the low-order 3 bits); if they are 0 then
+	 * re-read the register to get the correct value.
+	 */
+	uf = ehci_readl(ehci, &ehci->regs->frame_index);
+	if (unlikely(ehci->frame_index_bug && ((uf & 7) == 0)))
+		uf = ehci_readl(ehci, &ehci->regs->frame_index);
+	return uf;
+}
+
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -479,10 +500,9 @@ static int enable_periodic (struct ehci_hcd *ehci)
 	cmd = ehci_readl(ehci, &ehci->regs->command) | CMD_PSE;
 	ehci_writel(ehci, cmd, &ehci->regs->command);
 	/* posted write ... PSS happens later */
-	ehci_to_hcd(ehci)->state = HC_STATE_RUNNING;
 
 	/* make sure ehci_work scans these */
-	ehci->next_uframe = ehci_readl(ehci, &ehci->regs->frame_index)
+	ehci->next_uframe = ehci_read_frame_index(ehci)
 		% (ehci->periodic_size << 3);
 	if (unlikely(ehci->broken_periodic))
 		ehci->last_periodic_enable = ktime_get_real();
@@ -677,7 +697,7 @@ static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 	/* reschedule QH iff another request is queued */
 	if (!list_empty(&qh->qtd_list) &&
-			HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
+			ehci->rh_state == EHCI_RH_RUNNING) {
 		rc = qh_schedule(ehci, qh);
 
 		/* An error here likely indicates handshake failure
@@ -1409,7 +1429,7 @@ iso_stream_schedule (
 		goto fail;
 	}
 
-	now = ehci_readl(ehci, &ehci->regs->frame_index) & (mod - 1);
+	now = ehci_read_frame_index(ehci) & (mod - 1);
 
 	/* Typical case: reuse current schedule, stream is still active.
 	 * Hopefully there are no gaps from the host falling behind
@@ -2275,8 +2295,8 @@ scan_periodic (struct ehci_hcd *ehci)
 	 * Touches as few pages as possible:  cache-friendly.
 	 */
 	now_uframe = ehci->next_uframe;
-	if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
-		clock = ehci_readl(ehci, &ehci->regs->frame_index);
+	if (ehci->rh_state == EHCI_RH_RUNNING) {
+		clock = ehci_read_frame_index(ehci);
 		clock_frame = (clock >> 3) & (ehci->periodic_size - 1);
 	} else  {
 		clock = now_uframe + mod - 1;
@@ -2310,7 +2330,7 @@ restart:
 			union ehci_shadow	temp;
 			int			live;
 
-			live = HC_IS_RUNNING (ehci_to_hcd(ehci)->state);
+			live = (ehci->rh_state == EHCI_RH_RUNNING);
 			switch (hc32_to_cpu(ehci, type)) {
 			case Q_TYPE_QH:
 				/* handle any completions */
@@ -2435,7 +2455,7 @@ restart:
 		 * We can't advance our scan without collecting the ISO
 		 * transfers that are still pending in this frame.
 		 */
-		if (incomplete && HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
+		if (incomplete && ehci->rh_state == EHCI_RH_RUNNING) {
 			ehci->next_uframe = now_uframe;
 			break;
 		}
@@ -2451,12 +2471,11 @@ restart:
 		if (now_uframe == clock) {
 			unsigned	now;
 
-			if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state)
+			if (ehci->rh_state != EHCI_RH_RUNNING
 					|| ehci->periodic_sched == 0)
 				break;
 			ehci->next_uframe = now_uframe;
-			now = ehci_readl(ehci, &ehci->regs->frame_index) &
-					(mod - 1);
+			now = ehci_read_frame_index(ehci) & (mod - 1);
 			if (now_uframe == now)
 				break;
 
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
index 86a95bb80a61..9d9cf47d80da 100644
--- a/drivers/usb/host/ehci-sh.c
+++ b/drivers/usb/host/ehci-sh.c
@@ -168,7 +168,7 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev)
 	clk_enable(priv->fclk);
 	clk_enable(priv->iclk);
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to add hcd");
 		goto fail_add_hcd;
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index dbf1e4ef3c17..b115b0b76e33 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -154,7 +154,7 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
 	ehci->clk = usbh_clk;
 
 	spear_start_ehci(ehci);
-	retval = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (retval)
 		goto fail_add_hcd;
 
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 02b2bfd49a10..db9d1b4bfbdc 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -674,7 +674,7 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 	}
 #endif
 
-	err = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to add USB HCD\n");
 		goto fail;
diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c
index 47d749631bc7..54d1ab8aec49 100644
--- a/drivers/usb/host/ehci-vt8500.c
+++ b/drivers/usb/host/ehci-vt8500.c
@@ -133,7 +133,7 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev)
 	ehci_port_power(ehci, 1);
 
 	ret = usb_add_hcd(hcd, pdev->resource[1].start,
-			  IRQF_DISABLED | IRQF_SHARED);
+			  IRQF_SHARED);
 	if (ret == 0) {
 		platform_set_drvdata(pdev, hcd);
 		return ret;
diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c
new file mode 100644
index 000000000000..fe74bd676018
--- /dev/null
+++ b/drivers/usb/host/ehci-xls.c
@@ -0,0 +1,161 @@
+/*
+ * EHCI HCD for Netlogic XLS processors.
+ *
+ * (C) Copyright 2011 Netlogic Microsystems Inc.
+ *
+ *  Based on various ehci-*.c drivers
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/platform_device.h>
+
+static int ehci_xls_setup(struct usb_hcd *hcd)
+{
+	int	retval;
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs +
+		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	/* data structure init */
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	ehci_reset(ehci);
+
+	return retval;
+}
+
+int ehci_xls_probe_internal(const struct hc_driver *driver,
+	struct platform_device *pdev)
+{
+	struct usb_hcd  *hcd;
+	struct resource *res;
+	int retval, irq;
+
+	/* Get our IRQ from an earlier registered Platform Resource */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n",
+				dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+
+	/* Get our Memory Handle */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Error: MMIO Handle %s setup!\n",
+				dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err1;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+				driver->description)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		retval = -EBUSY;
+		goto err2;
+	}
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+
+	if (hcd->regs == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		retval = -EFAULT;
+		goto err3;
+	}
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval != 0)
+		goto err4;
+	return retval;
+
+err4:
+	iounmap(hcd->regs);
+err3:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err2:
+	usb_put_hcd(hcd);
+err1:
+	dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev),
+			retval);
+	return retval;
+}
+
+static struct hc_driver ehci_xls_hc_driver = {
+	.description	= hcd_name,
+	.product_desc	= "XLS EHCI Host Controller",
+	.hcd_priv_size	= sizeof(struct ehci_hcd),
+	.irq		= ehci_irq,
+	.flags		= HCD_USB2 | HCD_MEMORY,
+	.reset		= ehci_xls_setup,
+	.start		= ehci_run,
+	.stop		= ehci_stop,
+	.shutdown	= ehci_shutdown,
+
+	.urb_enqueue	= ehci_urb_enqueue,
+	.urb_dequeue	= ehci_urb_dequeue,
+	.endpoint_disable = ehci_endpoint_disable,
+	.endpoint_reset	= ehci_endpoint_reset,
+
+	.get_frame_number = ehci_get_frame,
+
+	.hub_status_data = ehci_hub_status_data,
+	.hub_control	= ehci_hub_control,
+	.bus_suspend	= ehci_bus_suspend,
+	.bus_resume	= ehci_bus_resume,
+	.relinquish_port = ehci_relinquish_port,
+	.port_handed_over = ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_xls_probe(struct platform_device *pdev)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	return ehci_xls_probe_internal(&ehci_xls_hc_driver, pdev);
+}
+
+static int ehci_xls_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+MODULE_ALIAS("ehci-xls");
+
+static struct platform_driver ehci_xls_driver = {
+	.probe		= ehci_xls_probe,
+	.remove		= ehci_xls_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name = "ehci-xls",
+	},
+};
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index cc7d337ec355..0a5fda73b3f2 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -62,6 +62,12 @@ struct ehci_stats {
 
 #define	EHCI_MAX_ROOT_PORTS	15		/* see HCS_N_PORTS */
 
+enum ehci_rh_state {
+	EHCI_RH_HALTED,
+	EHCI_RH_SUSPENDED,
+	EHCI_RH_RUNNING
+};
+
 struct ehci_hcd {			/* one per controller */
 	/* glue to PCI and HCD framework */
 	struct ehci_caps __iomem *caps;
@@ -70,6 +76,7 @@ struct ehci_hcd {			/* one per controller */
 
 	__u32			hcs_params;	/* cached register copy */
 	spinlock_t		lock;
+	enum ehci_rh_state	rh_state;
 
 	/* async schedule support */
 	struct ehci_qh		*async;
@@ -139,6 +146,7 @@ struct ehci_hcd {			/* one per controller */
 	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
 	unsigned		use_dummy_qh:1;	/* AMD Frame List table quirk*/
 	unsigned		has_synopsys_hc_bug:1; /* Synopsys HC */
+	unsigned		frame_index_bug:1; /* MosChip (AKA NetMos) */
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)
@@ -740,6 +748,22 @@ static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x)
 
 /*-------------------------------------------------------------------------*/
 
+#ifdef CONFIG_PCI
+
+/* For working around the MosChip frame-index-register bug */
+static unsigned ehci_read_frame_index(struct ehci_hcd *ehci);
+
+#else
+
+static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
+{
+	return ehci_readl(ehci, &ehci->regs->frame_index);
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
 #ifndef DEBUG
 #define STUB_DEBUG_FILES
 #endif	/* DEBUG */
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 572ea53b0226..4ed6d19f2a54 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -621,12 +621,15 @@ static int __devinit of_fhci_probe(struct platform_device *ofdev)
 		goto err_pram;
 	}
 
-	pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE);
+	pram_addr = cpm_muram_alloc(FHCI_PRAM_SIZE, 64);
 	if (IS_ERR_VALUE(pram_addr)) {
 		dev_err(dev, "failed to allocate usb pram\n");
 		ret = -ENOMEM;
 		goto err_pram;
 	}
+
+	qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, QE_CR_SUBBLOCK_USB,
+		     QE_CR_PROTOCOL_UNSPECIFIED, pram_addr);
 	fhci->pram = cpm_muram_addr(pram_addr);
 
 	/* GPIOs and pins */
@@ -686,7 +689,7 @@ static int __devinit of_fhci_probe(struct platform_device *ofdev)
 	}
 
 	ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq,
-			  IRQF_DISABLED, "qe timer (usb)", hcd);
+			  0, "qe timer (usb)", hcd);
 	if (ret) {
 		dev_err(dev, "failed to request timer irq");
 		goto err_timer_irq;
@@ -745,7 +748,7 @@ static int __devinit of_fhci_probe(struct platform_device *ofdev)
 	out_be16(&fhci->regs->usb_event, 0xffff);
 	out_be16(&fhci->regs->usb_mask, 0);
 
-	ret = usb_add_hcd(hcd, usb_irq, IRQF_DISABLED);
+	ret = usb_add_hcd(hcd, usb_irq, 0);
 	if (ret < 0)
 		goto err_add_hcd;
 
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index a42ef380e917..2df851b4bc7c 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -1,7 +1,7 @@
 /*
  * Freescale QUICC Engine USB Host Controller Driver
  *
- * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Copyright (c) Freescale Semicondutor, Inc. 2006, 2011.
  *               Shlomi Gridish <gridish@freescale.com>
  *               Jerry Huang <Chang-Ming.Huang@freescale.com>
  * Copyright (c) Logic Product Development, Inc. 2007
@@ -810,9 +810,11 @@ void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb)
 		ed->dev_addr = usb_pipedevice(urb->pipe);
 		ed->max_pkt_size = usb_maxpacket(urb->dev, urb->pipe,
 			usb_pipeout(urb->pipe));
+		/* setup stage */
 		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, FHCI_TA_SETUP,
 			USB_TD_TOGGLE_DATA0, urb->setup_packet, 8, 0, 0, true);
 
+		/* data stage */
 		if (data_len > 0) {
 			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
 				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
@@ -820,9 +822,18 @@ void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb)
 				USB_TD_TOGGLE_DATA1, data, data_len, 0, 0,
 				true);
 		}
-		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
-			usb_pipeout(urb->pipe) ? FHCI_TA_IN : FHCI_TA_OUT,
-			USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+
+		/* status stage */
+		if (data_len > 0)
+			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+				(usb_pipeout(urb->pipe) ? FHCI_TA_IN :
+							  FHCI_TA_OUT),
+				USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+		else
+			 td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+				FHCI_TA_IN,
+				USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+
 		urb_state = US_CTRL_SETUP;
 		break;
 	case FHCI_TF_ISO:
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index af05718bdc73..2ee18cfa1efe 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1891,7 +1891,7 @@ static int imx21_probe(struct platform_device *pdev)
 	dev_info(imx21->dev, "Hardware HC revision: 0x%02X\n",
 		(readl(imx21->regs + USBOTG_HWMODE) >> 16) & 0xFF);
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	ret = usb_add_hcd(hcd, irq, 0);
 	if (ret != 0) {
 		dev_err(imx21->dev, "usb_add_hcd() returned %d\n", ret);
 		goto failed_add_hcd;
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index baae4ccd16ac..d91e5f211a76 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1639,7 +1639,7 @@ static int __devinit isp116x_probe(struct platform_device *pdev)
 		goto err6;
 	}
 
-	ret = usb_add_hcd(hcd, irq, irqflags | IRQF_DISABLED);
+	ret = usb_add_hcd(hcd, irq, irqflags);
 	if (ret)
 		goto err6;
 
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 9c37dad3e816..e5fd8aa57af1 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2358,7 +2358,7 @@ static int isp1362_hc_reset(struct usb_hcd *hcd)
 	unsigned long flags;
 	int clkrdy = 0;
 
-	pr_info("%s:\n", __func__);
+	pr_debug("%s:\n", __func__);
 
 	if (isp1362_hcd->board && isp1362_hcd->board->reset) {
 		isp1362_hcd->board->reset(hcd->self.controller, 1);
@@ -2395,7 +2395,7 @@ static void isp1362_hc_stop(struct usb_hcd *hcd)
 	unsigned long flags;
 	u32 tmp;
 
-	pr_info("%s:\n", __func__);
+	pr_debug("%s:\n", __func__);
 
 	del_timer_sync(&hcd->rh_timer);
 
@@ -2523,7 +2523,7 @@ static int isp1362_hc_start(struct usb_hcd *hcd)
 	u16 chipid;
 	unsigned long flags;
 
-	pr_info("%s:\n", __func__);
+	pr_debug("%s:\n", __func__);
 
 	spin_lock_irqsave(&isp1362_hcd->lock, flags);
 	chipid = isp1362_read_reg16(isp1362_hcd, HCCHIPID);
@@ -2773,7 +2773,7 @@ static int __devinit isp1362_probe(struct platform_device *pdev)
 	if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL)
 		irq_flags |= IRQF_TRIGGER_LOW;
 
-	retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_DISABLED | IRQF_SHARED);
+	retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_SHARED);
 	if (retval != 0)
 		goto err6;
 	pr_info("%s, irq %d\n", hcd->product_desc, irq);
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 840beda66dd9..27dfab80ed8f 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -21,8 +21,10 @@
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <linux/mm.h>
+#include <linux/timer.h>
 #include <asm/unaligned.h>
 #include <asm/cacheflush.h>
+#include <linux/gpio.h>
 
 #include "isp1760-hcd.h"
 
@@ -39,7 +41,6 @@ struct isp1760_hcd {
 	int			int_done_map;
 	struct memory_chunk memory_pool[BLOCKS];
 	struct list_head	controlqhs, bulkqhs, interruptqhs;
-	int active_ptds;
 
 	/* periodic schedule support */
 #define	DEFAULT_I_TDPS		1024
@@ -48,6 +49,8 @@ struct isp1760_hcd {
 	unsigned long		reset_done;
 	unsigned long		next_statechange;
 	unsigned int		devflags;
+
+	int			rst_gpio;
 };
 
 static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd)
@@ -114,6 +117,7 @@ struct isp1760_qh {
 	u32 toggle;
 	u32 ping;
 	int slot;
+	int tt_buffer_dirty;	/* See USB2.0 spec section 11.17.5 */
 };
 
 struct urb_listitem {
@@ -432,6 +436,18 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
 	int result;
 	u32 scratch, hwmode;
 
+	/* low-level chip reset */
+	if (gpio_is_valid(priv->rst_gpio)) {
+		unsigned int rst_lvl;
+
+		rst_lvl = (priv->devflags &
+			   ISP1760_FLAG_RESET_ACTIVE_HIGH) ? 1 : 0;
+
+		gpio_set_value(priv->rst_gpio, rst_lvl);
+		mdelay(50);
+		gpio_set_value(priv->rst_gpio, !rst_lvl);
+	}
+
 	/* Setup HW Mode Control: This assumes a level active-low interrupt */
 	hwmode = HW_DATA_BUS_32BIT;
 
@@ -489,10 +505,6 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
 			   16 : 32, (priv->devflags & ISP1760_FLAG_ANALOG_OC) ?
 			   "analog" : "digital");
 
-	/* This is weird: at the first plug-in of a device there seems to be
-	   one packet queued that never gets returned? */
-	priv->active_ptds = -1;
-
 	/* ATL reset */
 	reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode | ALL_ATX_RESET);
 	mdelay(10);
@@ -514,83 +526,6 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
 	return priv_init(hcd);
 }
 
-static void isp1760_init_maps(struct usb_hcd *hcd)
-{
-	/*set last maps, for iso its only 1, else 32 tds bitmap*/
-	reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000);
-	reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000);
-	reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001);
-
-	reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff);
-
-	reg_write32(hcd->regs, HC_BUFFER_STATUS_REG,
-						ATL_BUF_FILL | INT_BUF_FILL);
-}
-
-static void isp1760_enable_interrupts(struct usb_hcd *hcd)
-{
-	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0);
-	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0);
-	reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0);
-	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff);
-	/* step 23 passed */
-}
-
-static int isp1760_run(struct usb_hcd *hcd)
-{
-	int retval;
-	u32 temp;
-	u32 command;
-	u32 chipid;
-
-	hcd->uses_new_polling = 1;
-
-	hcd->state = HC_STATE_RUNNING;
-	isp1760_enable_interrupts(hcd);
-	temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
-	reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN);
-
-	command = reg_read32(hcd->regs, HC_USBCMD);
-	command &= ~(CMD_LRESET|CMD_RESET);
-	command |= CMD_RUN;
-	reg_write32(hcd->regs, HC_USBCMD, command);
-
-	retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000);
-	if (retval)
-		return retval;
-
-	/*
-	 * XXX
-	 * Spec says to write FLAG_CF as last config action, priv code grabs
-	 * the semaphore while doing so.
-	 */
-	down_write(&ehci_cf_port_reset_rwsem);
-	reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF);
-
-	retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000);
-	up_write(&ehci_cf_port_reset_rwsem);
-	if (retval)
-		return retval;
-
-	chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG);
-	dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n",
-					chipid & 0xffff, chipid >> 16);
-
-	/* PTD Register Init Part 2, Step 28 */
-	/* enable INTs */
-	isp1760_init_maps(hcd);
-
-	/* GRR this is run-once init(), being done every time the HC starts.
-	 * So long as they're part of class devices, we can't do it init()
-	 * since the class device isn't created that early.
-	 */
-	return 0;
-}
-
 static u32 base_to_chip(u32 base)
 {
 	return ((base - 0x400) >> 3);
@@ -813,28 +748,29 @@ static void start_bus_transfer(struct usb_hcd *hcd, u32 ptd_offset, int slot,
 	WARN_ON(slots[slot].qh);
 	WARN_ON(qtd->status != QTD_PAYLOAD_ALLOC);
 
-	slots[slot].qtd = qtd;
-	slots[slot].qh = qh;
-	qh->slot = slot;
-	qtd->status = QTD_XFER_STARTED; /* Set this before writing ptd, since
-		interrupt routine may preempt and expects this value. */
-	ptd_write(hcd->regs, ptd_offset, slot, ptd);
-	priv->active_ptds++;
-
 	/* Make sure done map has not triggered from some unlinked transfer */
 	if (ptd_offset == ATL_PTD_OFFSET) {
 		priv->atl_done_map |= reg_read32(hcd->regs,
 						HC_ATL_PTD_DONEMAP_REG);
-		priv->atl_done_map &= ~(1 << qh->slot);
+		priv->atl_done_map &= ~(1 << slot);
+	} else {
+		priv->int_done_map |= reg_read32(hcd->regs,
+						HC_INT_PTD_DONEMAP_REG);
+		priv->int_done_map &= ~(1 << slot);
+	}
+
+	qh->slot = slot;
+	qtd->status = QTD_XFER_STARTED;
+	slots[slot].timestamp = jiffies;
+	slots[slot].qtd = qtd;
+	slots[slot].qh = qh;
+	ptd_write(hcd->regs, ptd_offset, slot, ptd);
 
+	if (ptd_offset == ATL_PTD_OFFSET) {
 		skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
 		skip_map &= ~(1 << qh->slot);
 		reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map);
 	} else {
-		priv->int_done_map |= reg_read32(hcd->regs,
-						HC_INT_PTD_DONEMAP_REG);
-		priv->int_done_map &= ~(1 << qh->slot);
-
 		skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
 		skip_map &= ~(1 << qh->slot);
 		reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map);
@@ -858,10 +794,7 @@ static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh,
 		if (qtd->status < QTD_XFER_COMPLETE)
 			break;
 
-		if (list_is_last(&qtd->qtd_list, &qh->qtd_list))
-			last_qtd = 1;
-		else
-			last_qtd = qtd->urb != qtd_next->urb;
+		last_qtd = last_qtd_of_urb(qtd, qh);
 
 		if ((!last_qtd) && (qtd->status == QTD_RETIRE))
 			qtd_next->status = QTD_RETIRE;
@@ -902,7 +835,7 @@ static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh,
 			urb_listitem = kmem_cache_zalloc(urb_listitem_cachep,
 								GFP_ATOMIC);
 			if (unlikely(!urb_listitem))
-				break;
+				break; /* Try again on next call */
 			urb_listitem->urb = qtd->urb;
 			list_add_tail(&urb_listitem->urb_list, urb_list);
 		}
@@ -928,6 +861,10 @@ static void enqueue_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh)
 		return;
 	}
 
+	/* Make sure this endpoint's TT buffer is clean before queueing ptds */
+	if (qh->tt_buffer_dirty)
+		return;
+
 	if (usb_pipeint(list_entry(qh->qtd_list.next, struct isp1760_qtd,
 							qtd_list)->urb->pipe)) {
 		ptd_offset = INT_PTD_OFFSET;
@@ -1168,11 +1105,9 @@ static int check_atl_transfer(struct usb_hcd *hcd, struct ptd *ptd,
 	return PTD_STATE_QTD_DONE;
 }
 
-static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
+static void handle_done_ptds(struct usb_hcd *hcd)
 {
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	u32 imask;
-	irqreturn_t irqret = IRQ_NONE;
 	struct ptd ptd;
 	struct isp1760_qh *qh;
 	int slot;
@@ -1181,27 +1116,14 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
 	u32 ptd_offset;
 	struct isp1760_qtd *qtd;
 	int modified;
-	static int last_active_ptds;
-	int int_skip_map, atl_skip_map;
-
-	spin_lock(&priv->lock);
-
-	if (!(hcd->state & HC_STATE_RUNNING))
-		goto leave;
-
-	imask = reg_read32(hcd->regs, HC_INTERRUPT_REG);
-	if (unlikely(!imask))
-		goto leave;
-	reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); /* Clear */
+	int skip_map;
 
-	int_skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
-	atl_skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
-	priv->int_done_map |= reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG);
-	priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG);
-	priv->int_done_map &= ~int_skip_map;
-	priv->atl_done_map &= ~atl_skip_map;
+	skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
+	priv->int_done_map &= ~skip_map;
+	skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
+	priv->atl_done_map &= ~skip_map;
 
-	modified = priv->int_done_map | priv->atl_done_map;
+	modified = priv->int_done_map || priv->atl_done_map;
 
 	while (priv->int_done_map || priv->atl_done_map) {
 		if (priv->int_done_map) {
@@ -1240,7 +1162,6 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
 		slots[slot].qtd = NULL;
 		qh = slots[slot].qh;
 		slots[slot].qh = NULL;
-		priv->active_ptds--;
 		qh->slot = -1;
 
 		WARN_ON(qtd->status != QTD_XFER_STARTED);
@@ -1281,6 +1202,15 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
 
 		case PTD_STATE_URB_RETIRE:
 			qtd->status = QTD_RETIRE;
+			if ((qtd->urb->dev->speed != USB_SPEED_HIGH) &&
+					(qtd->urb->status != -EPIPE) &&
+					(qtd->urb->status != -EREMOTEIO)) {
+				qh->tt_buffer_dirty = 1;
+				if (usb_hub_clear_tt_buffer(qtd->urb))
+					/* Clear failed; let's hope things work
+					   anyway */
+					qh->tt_buffer_dirty = 0;
+			}
 			qtd = NULL;
 			qh->toggle = 0;
 			qh->ping = 0;
@@ -1311,22 +1241,28 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
 
 	if (modified)
 		schedule_ptds(hcd);
+}
 
-	/* ISP1760 Errata 2 explains that interrupts may be missed (or not
-	   happen?) if two USB devices are running simultaneously. Perhaps
-	   this happens when a PTD is finished during interrupt handling;
-	   enable SOF interrupts if PTDs are still scheduled when exiting this
-	   interrupt handler, just to be safe. */
+static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 imask;
+	irqreturn_t irqret = IRQ_NONE;
 
-	if (priv->active_ptds != last_active_ptds) {
-		if (priv->active_ptds > 0)
-			reg_write32(hcd->regs, HC_INTERRUPT_ENABLE,
-						INTERRUPT_ENABLE_SOT_MASK);
-		else
-			reg_write32(hcd->regs, HC_INTERRUPT_ENABLE,
-						INTERRUPT_ENABLE_MASK);
-		last_active_ptds = priv->active_ptds;
-	}
+	spin_lock(&priv->lock);
+
+	if (!(hcd->state & HC_STATE_RUNNING))
+		goto leave;
+
+	imask = reg_read32(hcd->regs, HC_INTERRUPT_REG);
+	if (unlikely(!imask))
+		goto leave;
+	reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); /* Clear */
+
+	priv->int_done_map |= reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG);
+	priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG);
+
+	handle_done_ptds(hcd);
 
 	irqret = IRQ_HANDLED;
 leave:
@@ -1335,6 +1271,138 @@ leave:
 	return irqret;
 }
 
+/*
+ * Workaround for problem described in chip errata 2:
+ *
+ * Sometimes interrupts are not generated when ATL (not INT?) completion occurs.
+ * One solution suggested in the errata is to use SOF interrupts _instead_of_
+ * ATL done interrupts (the "instead of" might be important since it seems
+ * enabling ATL interrupts also causes the chip to sometimes - rarely - "forget"
+ * to set the PTD's done bit in addition to not generating an interrupt!).
+ *
+ * So if we use SOF + ATL interrupts, we sometimes get stale PTDs since their
+ * done bit is not being set. This is bad - it blocks the endpoint until reboot.
+ *
+ * If we use SOF interrupts only, we get latency between ptd completion and the
+ * actual handling. This is very noticeable in testusb runs which takes several
+ * minutes longer without ATL interrupts.
+ *
+ * A better solution is to run the code below every SLOT_CHECK_PERIOD ms. If it
+ * finds active ATL slots which are older than SLOT_TIMEOUT ms, it checks the
+ * slot's ACTIVE and VALID bits. If these are not set, the ptd is considered
+ * completed and its done map bit is set.
+ *
+ * The values of SLOT_TIMEOUT and SLOT_CHECK_PERIOD have been arbitrarily chosen
+ * not to cause too much lag when this HW bug occurs, while still hopefully
+ * ensuring that the check does not falsely trigger.
+ */
+#define SLOT_TIMEOUT 300
+#define SLOT_CHECK_PERIOD 200
+static struct timer_list errata2_timer;
+
+void errata2_function(unsigned long data)
+{
+	struct usb_hcd *hcd = (struct usb_hcd *) data;
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	int slot;
+	struct ptd ptd;
+	unsigned long spinflags;
+
+	spin_lock_irqsave(&priv->lock, spinflags);
+
+	for (slot = 0; slot < 32; slot++)
+		if (priv->atl_slots[slot].qh && time_after(jiffies,
+					priv->atl_slots[slot].timestamp +
+					SLOT_TIMEOUT * HZ / 1000)) {
+			ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd);
+			if (!FROM_DW0_VALID(ptd.dw0) &&
+					!FROM_DW3_ACTIVE(ptd.dw3))
+				priv->atl_done_map |= 1 << slot;
+		}
+
+	if (priv->atl_done_map)
+		handle_done_ptds(hcd);
+
+	spin_unlock_irqrestore(&priv->lock, spinflags);
+
+	errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000;
+	add_timer(&errata2_timer);
+}
+
+static int isp1760_run(struct usb_hcd *hcd)
+{
+	int retval;
+	u32 temp;
+	u32 command;
+	u32 chipid;
+
+	hcd->uses_new_polling = 1;
+
+	hcd->state = HC_STATE_RUNNING;
+
+	/* Set PTD interrupt AND & OR maps */
+	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0);
+	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0);
+	reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0);
+	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff);
+	/* step 23 passed */
+
+	temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
+	reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN);
+
+	command = reg_read32(hcd->regs, HC_USBCMD);
+	command &= ~(CMD_LRESET|CMD_RESET);
+	command |= CMD_RUN;
+	reg_write32(hcd->regs, HC_USBCMD, command);
+
+	retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000);
+	if (retval)
+		return retval;
+
+	/*
+	 * XXX
+	 * Spec says to write FLAG_CF as last config action, priv code grabs
+	 * the semaphore while doing so.
+	 */
+	down_write(&ehci_cf_port_reset_rwsem);
+	reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF);
+
+	retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000);
+	up_write(&ehci_cf_port_reset_rwsem);
+	if (retval)
+		return retval;
+
+	init_timer(&errata2_timer);
+	errata2_timer.function = errata2_function;
+	errata2_timer.data = (unsigned long) hcd;
+	errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000;
+	add_timer(&errata2_timer);
+
+	chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG);
+	dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n",
+					chipid & 0xffff, chipid >> 16);
+
+	/* PTD Register Init Part 2, Step 28 */
+
+	/* Setup registers controlling PTD checking */
+	reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000);
+	reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000);
+	reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001);
+	reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_BUFFER_STATUS_REG,
+						ATL_BUF_FILL | INT_BUF_FILL);
+
+	/* GRR this is run-once init(), being done every time the HC starts.
+	 * So long as they're part of class devices, we can't do it init()
+	 * since the class device isn't created that early.
+	 */
+	return 0;
+}
+
 static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len)
 {
 	qtd->data_buffer = databuffer;
@@ -1503,7 +1571,6 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 	packetize_urb(hcd, urb, &new_qtds, mem_flags);
 	if (list_empty(&new_qtds))
 		return -ENOMEM;
-	urb->hcpriv = NULL; /* Used to signal unlink to interrupt handler */
 
 	retval = 0;
 	spin_lock_irqsave(&priv->lock, spinflags);
@@ -1531,6 +1598,7 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 		qh = qh_alloc(GFP_ATOMIC);
 		if (!qh) {
 			retval = -ENOMEM;
+			usb_hcd_unlink_urb_from_ep(hcd, urb);
 			goto out;
 		}
 		list_add_tail(&qh->qh_list, ep_queue);
@@ -1570,7 +1638,41 @@ static void kill_transfer(struct usb_hcd *hcd, struct urb *urb,
 	}
 
 	qh->slot = -1;
-	priv->active_ptds--;
+}
+
+/*
+ * Retire the qtds beginning at 'qtd' and belonging all to the same urb, killing
+ * any active transfer belonging to the urb in the process.
+ */
+static void dequeue_urb_from_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh,
+						struct isp1760_qtd *qtd)
+{
+	struct urb *urb;
+	int urb_was_running;
+
+	urb = qtd->urb;
+	urb_was_running = 0;
+	list_for_each_entry_from(qtd, &qh->qtd_list, qtd_list) {
+		if (qtd->urb != urb)
+			break;
+
+		if (qtd->status >= QTD_XFER_STARTED)
+			urb_was_running = 1;
+		if (last_qtd_of_urb(qtd, qh) &&
+					(qtd->status >= QTD_XFER_COMPLETE))
+			urb_was_running = 0;
+
+		if (qtd->status == QTD_XFER_STARTED)
+			kill_transfer(hcd, urb, qh);
+		qtd->status = QTD_RETIRE;
+	}
+
+	if ((urb->dev->speed != USB_SPEED_HIGH) && urb_was_running) {
+		qh->tt_buffer_dirty = 1;
+		if (usb_hub_clear_tt_buffer(urb))
+			/* Clear failed; let's hope things work anyway */
+			qh->tt_buffer_dirty = 0;
+	}
 }
 
 static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
@@ -1595,9 +1697,8 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 
 	list_for_each_entry(qtd, &qh->qtd_list, qtd_list)
 		if (qtd->urb == urb) {
-			if (qtd->status == QTD_XFER_STARTED)
-				kill_transfer(hcd, urb, qh);
-			qtd->status = QTD_RETIRE;
+			dequeue_urb_from_qtd(hcd, qh, qtd);
+			break;
 		}
 
 	urb->status = status;
@@ -1622,12 +1723,11 @@ static void isp1760_endpoint_disable(struct usb_hcd *hcd,
 	if (!qh)
 		goto out;
 
-	list_for_each_entry(qtd, &qh->qtd_list, qtd_list) {
-		if (qtd->status == QTD_XFER_STARTED)
-			kill_transfer(hcd, qtd->urb, qh);
-		qtd->status = QTD_RETIRE;
-		qtd->urb->status = -ECONNRESET;
-	}
+	list_for_each_entry(qtd, &qh->qtd_list, qtd_list)
+		if (qtd->status != QTD_RETIRE) {
+			dequeue_urb_from_qtd(hcd, qh, qtd);
+			qtd->urb->status = -ECONNRESET;
+		}
 
 	ep->hcpriv = NULL;
 	/* Cannot free qh here since it will be parsed by schedule_ptds() */
@@ -2021,6 +2121,8 @@ static void isp1760_stop(struct usb_hcd *hcd)
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	u32 temp;
 
+	del_timer(&errata2_timer);
+
 	isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER,	1,
 			NULL, 0);
 	mdelay(20);
@@ -2048,6 +2150,23 @@ static void isp1760_shutdown(struct usb_hcd *hcd)
 	reg_write32(hcd->regs, HC_USBCMD, command);
 }
 
+static void isp1760_clear_tt_buffer_complete(struct usb_hcd *hcd,
+						struct usb_host_endpoint *ep)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	struct isp1760_qh *qh = ep->hcpriv;
+	unsigned long spinflags;
+
+	if (!qh)
+		return;
+
+	spin_lock_irqsave(&priv->lock, spinflags);
+	qh->tt_buffer_dirty = 0;
+	schedule_ptds(hcd);
+	spin_unlock_irqrestore(&priv->lock, spinflags);
+}
+
+
 static const struct hc_driver isp1760_hc_driver = {
 	.description		= "isp1760-hcd",
 	.product_desc		= "NXP ISP1760 USB Host Controller",
@@ -2064,6 +2183,7 @@ static const struct hc_driver isp1760_hc_driver = {
 	.get_frame_number	= isp1760_get_frame,
 	.hub_status_data	= isp1760_hub_status_data,
 	.hub_control		= isp1760_hub_control,
+	.clear_tt_buffer_complete	= isp1760_clear_tt_buffer_complete,
 };
 
 int __init init_kmem_once(void)
@@ -2102,6 +2222,7 @@ void deinit_kmem_cache(void)
 
 struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len,
 				 int irq, unsigned long irqflags,
+				 int rst_gpio,
 				 struct device *dev, const char *busname,
 				 unsigned int devflags)
 {
@@ -2121,6 +2242,7 @@ struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len,
 
 	priv = hcd_to_priv(hcd);
 	priv->devflags = devflags;
+	priv->rst_gpio = rst_gpio;
 	init_memory(priv);
 	hcd->regs = ioremap(res_start, res_len);
 	if (!hcd->regs) {
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
index 014a7dfadf91..33dc79ccaa6b 100644
--- a/drivers/usb/host/isp1760-hcd.h
+++ b/drivers/usb/host/isp1760-hcd.h
@@ -4,6 +4,7 @@
 /* exports for if */
 struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len,
 				 int irq, unsigned long irqflags,
+				 int rst_gpio,
 				 struct device *dev, const char *busname,
 				 unsigned int devflags);
 int init_kmem_once(void);
@@ -73,7 +74,6 @@ void deinit_kmem_cache(void);
 #define HC_EOT_INT		(1 << 3)
 #define HC_SOT_INT		(1 << 1)
 #define INTERRUPT_ENABLE_MASK	(HC_INTL_INT | HC_ATL_INT)
-#define INTERRUPT_ENABLE_SOT_MASK	(HC_SOT_INT)
 
 #define HC_ISO_IRQ_MASK_OR_REG	0x318
 #define HC_INT_IRQ_MASK_OR_REG	0x31C
@@ -107,6 +107,7 @@ struct ptd {
 struct slotinfo {
 	struct isp1760_qh *qh;
 	struct isp1760_qtd *qtd;
+	unsigned long timestamp;
 };
 
 
@@ -126,6 +127,7 @@ typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
 #define ISP1760_FLAG_ISP1761		0x00000040 /* Chip is ISP1761 */
 #define ISP1760_FLAG_INTR_POL_HIGH	0x00000080 /* Interrupt polarity active high */
 #define ISP1760_FLAG_INTR_EDGE_TRIG	0x00000100 /* Interrupt edge triggered */
+#define ISP1760_FLAG_RESET_ACTIVE_HIGH	0x80000000 /* RESET GPIO active high */
 
 /* chip memory management */
 struct memory_chunk {
@@ -188,6 +190,7 @@ struct memory_chunk {
 #define DW3_BABBLE_BIT			(1 << 29)
 #define DW3_HALT_BIT			(1 << 30)
 #define DW3_ACTIVE_BIT			(1 << 31)
+#define FROM_DW3_ACTIVE(x)		(((x) >> 31) & 0x01)
 
 #define INT_UNDERRUN			(1 << 2)
 #define INT_BABBLE			(1 << 1)
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 7ee30056f373..2c7fc830c9e4 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -17,19 +17,28 @@
 
 #include "isp1760-hcd.h"
 
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_OF
+#include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
 #endif
 
 #ifdef CONFIG_PCI
 #include <linux/pci.h>
 #endif
 
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_OF
+struct isp1760 {
+	struct usb_hcd *hcd;
+	int rst_gpio;
+};
+
 static int of_isp1760_probe(struct platform_device *dev)
 {
-	struct usb_hcd *hcd;
+	struct isp1760 *drvdata;
 	struct device_node *dp = dev->dev.of_node;
 	struct resource *res;
 	struct resource memory;
@@ -39,6 +48,11 @@ static int of_isp1760_probe(struct platform_device *dev)
 	int ret;
 	const unsigned int *prop;
 	unsigned int devflags = 0;
+	enum of_gpio_flags gpio_flags;
+
+	drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
 
 	ret = of_address_to_resource(dp, 0, &memory);
 	if (ret)
@@ -78,32 +92,57 @@ static int of_isp1760_probe(struct platform_device *dev)
 	if (of_get_property(dp, "dreq-polarity", NULL) != NULL)
 		devflags |= ISP1760_FLAG_DREQ_POL_HIGH;
 
-	hcd = isp1760_register(memory.start, res_len, virq,
-		IRQF_SHARED | IRQF_DISABLED, &dev->dev, dev_name(&dev->dev),
-		devflags);
-	if (IS_ERR(hcd)) {
-		ret = PTR_ERR(hcd);
-		goto release_reg;
+	drvdata->rst_gpio = of_get_gpio_flags(dp, 0, &gpio_flags);
+	if (gpio_is_valid(drvdata->rst_gpio)) {
+		ret = gpio_request(drvdata->rst_gpio, dev_name(&dev->dev));
+		if (!ret) {
+			if (!(gpio_flags & OF_GPIO_ACTIVE_LOW)) {
+				devflags |= ISP1760_FLAG_RESET_ACTIVE_HIGH;
+				gpio_direction_output(drvdata->rst_gpio, 0);
+			} else {
+				gpio_direction_output(drvdata->rst_gpio, 1);
+			}
+		} else {
+			drvdata->rst_gpio = ret;
+		}
 	}
 
-	dev_set_drvdata(&dev->dev, hcd);
+	drvdata->hcd = isp1760_register(memory.start, res_len, virq,
+					IRQF_SHARED, drvdata->rst_gpio,
+					&dev->dev, dev_name(&dev->dev),
+					devflags);
+	if (IS_ERR(drvdata->hcd)) {
+		ret = PTR_ERR(drvdata->hcd);
+		goto free_gpio;
+	}
+
+	dev_set_drvdata(&dev->dev, drvdata);
 	return ret;
 
+free_gpio:
+	if (gpio_is_valid(drvdata->rst_gpio))
+		gpio_free(drvdata->rst_gpio);
 release_reg:
 	release_mem_region(memory.start, res_len);
+	kfree(drvdata);
 	return ret;
 }
 
 static int of_isp1760_remove(struct platform_device *dev)
 {
-	struct usb_hcd *hcd = dev_get_drvdata(&dev->dev);
+	struct isp1760 *drvdata = dev_get_drvdata(&dev->dev);
 
 	dev_set_drvdata(&dev->dev, NULL);
 
-	usb_remove_hcd(hcd);
-	iounmap(hcd->regs);
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-	usb_put_hcd(hcd);
+	usb_remove_hcd(drvdata->hcd);
+	iounmap(drvdata->hcd->regs);
+	release_mem_region(drvdata->hcd->rsrc_start, drvdata->hcd->rsrc_len);
+	usb_put_hcd(drvdata->hcd);
+
+	if (gpio_is_valid(drvdata->rst_gpio))
+		gpio_free(drvdata->rst_gpio);
+
+	kfree(drvdata);
 	return 0;
 }
 
@@ -240,7 +279,7 @@ static int __devinit isp1761_pci_probe(struct pci_dev *dev,
 
 	dev->dev.dma_mask = NULL;
 	hcd = isp1760_register(pci_mem_phy0, memlength, dev->irq,
-		IRQF_SHARED | IRQF_DISABLED, &dev->dev, dev_name(&dev->dev),
+		IRQF_SHARED, -ENOENT, &dev->dev, dev_name(&dev->dev),
 		devflags);
 	if (IS_ERR(hcd)) {
 		ret_status = -ENODEV;
@@ -313,7 +352,7 @@ static int __devinit isp1760_plat_probe(struct platform_device *pdev)
 	resource_size_t mem_size;
 	struct isp1760_platform_data *priv = pdev->dev.platform_data;
 	unsigned int devflags = 0;
-	unsigned long irqflags = IRQF_SHARED | IRQF_DISABLED;
+	unsigned long irqflags = IRQF_SHARED;
 
 	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!mem_res) {
@@ -351,7 +390,8 @@ static int __devinit isp1760_plat_probe(struct platform_device *pdev)
 	}
 
 	hcd = isp1760_register(mem_res->start, mem_size, irq_res->start,
-			       irqflags, &pdev->dev, dev_name(&pdev->dev), devflags);
+			       irqflags, -ENOENT,
+			       &pdev->dev, dev_name(&pdev->dev), devflags);
 	if (IS_ERR(hcd)) {
 		pr_warning("isp1760: Failed to register the HCD device\n");
 		ret = -ENODEV;
@@ -396,7 +436,7 @@ static int __init isp1760_init(void)
 	ret = platform_driver_register(&isp1760_plat_driver);
 	if (!ret)
 		any_ret = 0;
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_OF
 	ret = platform_driver_register(&isp1760_of_driver);
 	if (!ret)
 		any_ret = 0;
@@ -416,7 +456,7 @@ module_init(isp1760_init);
 static void __exit isp1760_exit(void)
 {
 	platform_driver_unregister(&isp1760_plat_driver);
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_OF
 	platform_driver_unregister(&isp1760_of_driver);
 #endif
 #ifdef CONFIG_PCI
diff --git a/drivers/usb/host/ohci-ath79.c b/drivers/usb/host/ohci-ath79.c
index c620c50f6770..18d574d6958b 100644
--- a/drivers/usb/host/ohci-ath79.c
+++ b/drivers/usb/host/ohci-ath79.c
@@ -111,7 +111,7 @@ static int ohci_ath79_probe(struct platform_device *pdev)
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	ret = usb_add_hcd(hcd, irq, 0);
 	if (ret)
 		goto err_stop_hcd;
 
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 958d985f2951..6b7bc50dfeaa 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -218,7 +218,7 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
 	ret = usb_add_hcd(hcd, pdev->resource[1].start,
-			  IRQF_DISABLED | IRQF_SHARED);
+			  IRQF_SHARED);
 	if (ret == 0) {
 		platform_set_drvdata(pdev, hcd);
 		return ret;
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 6aca2c4453f7..843509778a33 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -344,7 +344,7 @@ static int usb_hcd_da8xx_probe(const struct hc_driver *driver,
 		error = -ENODEV;
 		goto err4;
 	}
-	error = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	error = usb_add_hcd(hcd, irq, 0);
 	if (error)
 		goto err4;
 
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 4e681613e7ae..dc45d489d00e 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -81,7 +81,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, pdev->resource[1].start, 0);
 	if (retval == 0)
 		return retval;
 
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index f9cf3f04b742..34efd479e068 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1114,6 +1114,11 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ohci_hcd_ath79_driver
 #endif
 
+#ifdef CONFIG_NLM_XLR
+#include "ohci-xls.c"
+#define PLATFORM_DRIVER		ohci_xls_driver
+#endif
+
 #if	!defined(PCI_DRIVER) &&		\
 	!defined(PLATFORM_DRIVER) &&	\
 	!defined(OMAP1_PLATFORM_DRIVER) &&	\
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 9154615292db..2f00040fc408 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -356,10 +356,7 @@ static void ohci_finish_controller_resume(struct usb_hcd *hcd)
 		msleep(20);
 	}
 
-	/* Does the root hub have a port wakeup pending? */
-	if (ohci_readl(ohci, &ohci->regs->intrstatus) &
-			(OHCI_INTR_RD | OHCI_INTR_RHSC))
-		usb_hcd_resume_root_hub(hcd);
+	usb_hcd_resume_root_hub(hcd);
 }
 
 /* Carry out polling-, autostop-, and autoresume-related state changes */
diff --git a/drivers/usb/host/ohci-octeon.c b/drivers/usb/host/ohci-octeon.c
index d8b45647d1dc..d469bf9b9e54 100644
--- a/drivers/usb/host/ohci-octeon.c
+++ b/drivers/usb/host/ohci-octeon.c
@@ -164,7 +164,7 @@ static int ohci_octeon_drv_probe(struct platform_device *pdev)
 
 	ohci_hcd_init(ohci);
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret) {
 		dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
 		goto err3;
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 5645f70b9214..e4b8782cc6e2 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -14,7 +14,7 @@
  * This file is licenced under the GPL.
  */
 
-#include <linux/signal.h>	/* IRQF_DISABLED */
+#include <linux/signal.h>
 #include <linux/jiffies.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
@@ -363,7 +363,7 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver,
 		retval = -ENXIO;
 		goto err3;
 	}
-	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, irq, 0);
 	if (retval)
 		goto err3;
 
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 6048f2f64f73..516ebc4d6cc2 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -149,7 +149,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
 
 	res = platform_get_resource_byname(pdev,
 				IORESOURCE_MEM, "ohci");
-	if (!ret) {
+	if (!res) {
 		dev_err(dev, "UHH OHCI get resource failed\n");
 		return -ENOMEM;
 	}
@@ -180,7 +180,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	ret = usb_add_hcd(hcd, irq, 0);
 	if (ret) {
 		dev_dbg(dev, "failed to add hcd with err %d\n", ret);
 		goto err_add_hcd;
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 653d6a60edb5..9ad8bee22c15 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -398,7 +398,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
 	ohci_hcd_init(ohci);
 
 	dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	ret = usb_add_hcd(hcd, irq, 0);
 	if (ret == 0)
 		return ret;
 
diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c
index 28467e288a93..f13d08f94d6b 100644
--- a/drivers/usb/host/ohci-pnx8550.c
+++ b/drivers/usb/host/ohci-pnx8550.c
@@ -107,7 +107,7 @@ int usb_hcd_pnx8550_probe (const struct hc_driver *driver,
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, dev->resource[1].start, 0);
 	if (retval == 0)
 		return retval;
 
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index 0c12f4e14dcd..d24cc89de16f 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -143,7 +143,7 @@ static int __devinit ohci_hcd_ppc_of_probe(struct platform_device *op)
 
 	ohci_hcd_init(ohci);
 
-	rv = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	rv = usb_add_hcd(hcd, irq, 0);
 	if (rv == 0)
 		return 0;
 
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index c0f595c44487..1514b7067470 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -80,7 +80,7 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
 #endif
 	ohci_hcd_init(ohci);
 
-	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, irq, 0);
 	if (retval == 0)
 		return retval;
 
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 700950455f4d..6fd4fa1f19bb 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -164,7 +164,7 @@ static int __devinit ps3_ohci_probe(struct ps3_system_bus_device *dev)
 
 	ps3_system_bus_set_drvdata(dev, hcd);
 
-	result = usb_add_hcd(hcd, virq, IRQF_DISABLED);
+	result = usb_add_hcd(hcd, virq, 0);
 
 	if (result) {
 		dev_dbg(&dev->core, "%s:%d: usb_add_hcd failed (%d)\n",
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 80be5472783a..29dfefe1c726 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -359,7 +359,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, irq, 0);
 	if (retval == 0)
 		return retval;
 
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index dd24fc115e48..15dc51ded61a 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -428,7 +428,7 @@ static struct ed *ed_get (
 		ed->type = usb_pipetype(pipe);
 
 		info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << 7;
-		info |= le16_to_cpu(ep->desc.wMaxPacketSize) << 16;
+		info |= usb_endpoint_maxp(&ep->desc) << 16;
 		if (udev->speed == USB_SPEED_LOW)
 			info |= ED_LOWSPEED;
 		/* only control transfers store pids in tds */
@@ -444,7 +444,7 @@ static struct ed *ed_get (
 				ed->load = usb_calc_bus_time (
 					udev->speed, !is_out,
 					ed->type == PIPE_ISOCHRONOUS,
-					le16_to_cpu(ep->desc.wMaxPacketSize))
+					usb_endpoint_maxp(&ep->desc))
 						/ 1000;
 			}
 		}
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 7c9a4d55526b..a1877c47601e 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -384,7 +384,7 @@ static int usb_hcd_s3c2410_probe(const struct hc_driver *driver,
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, dev->resource[1].start, 0);
 	if (retval != 0)
 		goto err_ioremap;
 
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 4204d9720d23..4bde4f9821ba 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -143,7 +143,7 @@ int usb_hcd_sa1111_probe (const struct hc_driver *driver,
 	sa1111_start_hc(dev);
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, dev->irq[1], IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, dev->irq[1], 0);
 	if (retval == 0)
 		return retval;
 
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index 14cecb52a9fe..afc4eb6bb9d0 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -109,7 +109,7 @@ static int ohci_hcd_sh_probe(struct platform_device *pdev)
 	hcd->regs = (void __iomem *)res->start;
 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret != 0) {
 		err("Failed to add hcd");
 		usb_put_hcd(hcd);
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index 78918ca0da23..968cea2b6d4e 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -165,7 +165,7 @@ static int ohci_hcd_sm501_drv_probe(struct platform_device *pdev)
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (retval)
 		goto err5;
 
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index 4fd4bea9ac7a..69874654f3b5 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -152,7 +152,7 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
 	spear_start_ohci(ohci_p);
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), 0);
 	if (retval == 0)
 		return retval;
 
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
index c4aea3b8315e..5ba18595d6f7 100644
--- a/drivers/usb/host/ohci-ssb.c
+++ b/drivers/usb/host/ohci-ssb.c
@@ -169,7 +169,7 @@ static int ssb_ohci_attach(struct ssb_device *dev)
 	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
 	if (!hcd->regs)
 		goto err_put_hcd;
-	err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
+	err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
 	if (err)
 		goto err_iounmap;
 
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index 57ad1271fc9b..06331d931171 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -244,7 +244,7 @@ static int __devinit ohci_hcd_tmio_drv_probe(struct platform_device *dev)
 	ohci = hcd_to_ohci(hcd);
 	ohci_hcd_init(ohci);
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	ret = usb_add_hcd(hcd, irq, 0);
 	if (ret)
 		goto err_add_hcd;
 
diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c
new file mode 100644
index 000000000000..a3a9c6f45b91
--- /dev/null
+++ b/drivers/usb/host/ohci-xls.c
@@ -0,0 +1,151 @@
+/*
+ * OHCI HCD for Netlogic XLS processors.
+ *
+ * (C) Copyright 2011 Netlogic Microsystems Inc.
+ *
+ *  Based on ohci-au1xxx.c, and other Linux OHCI drivers.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/signal.h>
+
+static int ohci_xls_probe_internal(const struct hc_driver *driver,
+			struct platform_device *dev)
+{
+	struct resource *res;
+	struct usb_hcd *hcd;
+	int retval, irq;
+
+	/* Get our IRQ from an earlier registered Platform Resource */
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		dev_err(&dev->dev, "Found HC with no IRQ\n");
+		return -ENODEV;
+	}
+
+	/* Get our Memory Handle */
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&dev->dev, "MMIO Handle incorrect!\n");
+		return -ENODEV;
+	}
+
+	hcd = usb_create_hcd(driver, &dev->dev, "XLS");
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err1;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+			driver->description)) {
+		dev_dbg(&dev->dev, "Controller already in use\n");
+		retval = -EBUSY;
+		goto err2;
+	}
+
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_dbg(&dev->dev, "error mapping memory\n");
+		retval = -EFAULT;
+		goto err3;
+	}
+
+	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	if (retval != 0)
+		goto err4;
+	return retval;
+
+err4:
+	iounmap(hcd->regs);
+err3:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err2:
+	usb_put_hcd(hcd);
+err1:
+	dev_err(&dev->dev, "init fail, %d\n", retval);
+	return retval;
+}
+
+static int ohci_xls_reset(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+	ohci_hcd_init(ohci);
+	return ohci_init(ohci);
+}
+
+static int __devinit ohci_xls_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci;
+	int ret;
+
+	ohci = hcd_to_ohci(hcd);
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		err("can't start %s", hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+	return 0;
+}
+
+static struct hc_driver ohci_xls_hc_driver = {
+	.description	= hcd_name,
+	.product_desc	= "XLS OHCI Host Controller",
+	.hcd_priv_size	= sizeof(struct ohci_hcd),
+	.irq		= ohci_irq,
+	.flags		= HCD_MEMORY | HCD_USB11,
+	.reset		= ohci_xls_reset,
+	.start		= ohci_xls_start,
+	.stop		= ohci_stop,
+	.shutdown	= ohci_shutdown,
+	.urb_enqueue	= ohci_urb_enqueue,
+	.urb_dequeue	= ohci_urb_dequeue,
+	.endpoint_disable = ohci_endpoint_disable,
+	.get_frame_number = ohci_get_frame,
+	.hub_status_data = ohci_hub_status_data,
+	.hub_control	= ohci_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend	= ohci_bus_suspend,
+	.bus_resume	= ohci_bus_resume,
+#endif
+	.start_port_reset = ohci_start_port_reset,
+};
+
+static int ohci_xls_probe(struct platform_device *dev)
+{
+	int ret;
+
+	pr_debug("In ohci_xls_probe");
+	if (usb_disabled())
+		return -ENODEV;
+	ret = ohci_xls_probe_internal(&ohci_xls_hc_driver, dev);
+	return ret;
+}
+
+static int ohci_xls_remove(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+static struct platform_driver ohci_xls_driver = {
+	.probe		= ohci_xls_probe,
+	.remove		= ohci_xls_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "ohci-xls-0",
+		.owner	= THIS_MODULE,
+	},
+};
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 40a0d8b03ad7..e84ca1928dbf 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -959,7 +959,7 @@ static void init_pipe_info(struct r8a66597 *r8a66597, struct urb *urb,
 	info.pipenum = get_empty_pipenum(r8a66597, ep);
 	info.address = get_urb_to_r8a66597_addr(r8a66597, urb);
 	info.epnum = usb_endpoint_num(ep);
-	info.maxpacket = le16_to_cpu(ep->wMaxPacketSize);
+	info.maxpacket = usb_endpoint_maxp(ep);
 	info.type = get_r8a66597_type(usb_endpoint_type(ep));
 	info.bufnum = get_bufnum(info.pipenum);
 	info.buf_bsize = get_buf_bsize(info.pipenum);
@@ -2519,7 +2519,7 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
 	hcd->rsrc_start = res->start;
 	hcd->has_tt = 1;
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger);
+	ret = usb_add_hcd(hcd, irq, irq_trigger);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to add hcd\n");
 		goto clean_up3;
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 1a996245ab98..961d6638d8f9 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1729,7 +1729,7 @@ sl811h_probe(struct platform_device *dev)
 	 * Use resource IRQ flags if set by platform device setup.
 	 */
 	irqflags |= IRQF_SHARED;
-	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | irqflags);
+	retval = usb_add_hcd(hcd, irq, irqflags);
 	if (retval != 0)
 		goto err6;
 
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index fba99b120588..c8ae199cfbb8 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -294,50 +294,50 @@ __acquires(uhci->lock)
 	 * and that remote wakeups should be enabled.
 	 */
 	egsm_enable = USBCMD_EGSM;
-	uhci->RD_enable = 1;
 	int_enable = USBINTR_RESUME;
 	wakeup_enable = 1;
 
-	/* In auto-stop mode wakeups must always be detected, but
-	 * Resume-Detect interrupts may be prohibited.  (In the absence
-	 * of CONFIG_PM, they are always disallowed.)
+	/*
+	 * In auto-stop mode, we must be able to detect new connections.
+	 * The user can force us to poll by disabling remote wakeup;
+	 * otherwise we will use the EGSM/RD mechanism.
 	 */
 	if (auto_stop) {
 		if (!device_may_wakeup(&rhdev->dev))
-			int_enable = 0;
+			egsm_enable = int_enable = 0;
+	}
 
-	/* In bus-suspend mode wakeups may be disabled, but if they are
-	 * allowed then so are Resume-Detect interrupts.
-	 */
-	} else {
 #ifdef CONFIG_PM
+	/*
+	 * In bus-suspend mode, we use the wakeup setting specified
+	 * for the root hub.
+	 */
+	else {
 		if (!rhdev->do_remote_wakeup)
 			wakeup_enable = 0;
-#endif
 	}
+#endif
 
-	/* EGSM causes the root hub to echo a 'K' signal (resume) out any
-	 * port which requests a remote wakeup.  According to the USB spec,
-	 * every hub is supposed to do this.  But if we are ignoring
-	 * remote-wakeup requests anyway then there's no point to it.
-	 * We also shouldn't enable EGSM if it's broken.
-	 */
-	if (!wakeup_enable || global_suspend_mode_is_broken(uhci))
-		egsm_enable = 0;
-
-	/* If we're ignoring wakeup events then there's no reason to
-	 * enable Resume-Detect interrupts.  We also shouldn't enable
-	 * them if they are broken or disallowed.
+	/*
+	 * UHCI doesn't distinguish between wakeup requests from downstream
+	 * devices and local connect/disconnect events.  There's no way to
+	 * enable one without the other; both are controlled by EGSM.  Thus
+	 * if wakeups are disallowed then EGSM must be turned off -- in which
+	 * case remote wakeup requests from downstream during system sleep
+	 * will be lost.
+	 *
+	 * In addition, if EGSM is broken then we can't use it.  Likewise,
+	 * if Resume-Detect interrupts are broken then we can't use them.
 	 *
-	 * This logic may lead us to enabling RD but not EGSM.  The UHCI
-	 * spec foolishly says that RD works only when EGSM is on, but
-	 * there's no harm in enabling it anyway -- perhaps some chips
-	 * will implement it!
+	 * Finally, neither EGSM nor RD is useful by itself.  Without EGSM,
+	 * the RD status bit will never get set.  Without RD, the controller
+	 * won't generate interrupts to tell the system about wakeup events.
 	 */
-	if (!wakeup_enable || resume_detect_interrupts_are_broken(uhci) ||
-			!int_enable)
-		uhci->RD_enable = int_enable = 0;
+	if (!wakeup_enable || global_suspend_mode_is_broken(uhci) ||
+			resume_detect_interrupts_are_broken(uhci))
+		egsm_enable = int_enable = 0;
 
+	uhci->RD_enable = !!int_enable;
 	uhci_writew(uhci, int_enable, USBINTR);
 	uhci_writew(uhci, egsm_enable | USBCMD_CF, USBCMD);
 	mb();
@@ -364,10 +364,12 @@ __acquires(uhci->lock)
 	uhci->rh_state = new_state;
 	uhci->is_stopped = UHCI_IS_STOPPED;
 
-	/* If interrupts don't work and remote wakeup is enabled then
-	 * the suspended root hub needs to be polled.
+	/*
+	 * If remote wakeup is enabled but either EGSM or RD interrupts
+	 * doesn't work, then we won't get an interrupt when a wakeup event
+	 * occurs.  Thus the suspended root hub needs to be polled.
 	 */
-	if (!int_enable && wakeup_enable)
+	if (wakeup_enable && (!int_enable || !egsm_enable))
 		set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
 	else
 		clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 84ed28b34f93..f6ca80ee4cec 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -280,7 +280,7 @@ static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci,
 			qh->load = usb_calc_bus_time(udev->speed,
 					usb_endpoint_dir_in(&hep->desc),
 					qh->type == USB_ENDPOINT_XFER_ISOC,
-					le16_to_cpu(hep->desc.wMaxPacketSize))
+					usb_endpoint_maxp(&hep->desc))
 				/ 1000 + 1;
 
 	} else {		/* Skeleton QH */
@@ -792,7 +792,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
 {
 	struct uhci_td *td;
 	unsigned long destination, status;
-	int maxsze = le16_to_cpu(qh->hep->desc.wMaxPacketSize);
+	int maxsze = usb_endpoint_maxp(&qh->hep->desc);
 	int len = urb->transfer_buffer_length;
 	dma_addr_t data = urb->transfer_dma;
 	__hc32 *plink;
@@ -918,7 +918,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb,
 {
 	struct uhci_td *td;
 	unsigned long destination, status;
-	int maxsze = le16_to_cpu(qh->hep->desc.wMaxPacketSize);
+	int maxsze = usb_endpoint_maxp(&qh->hep->desc);
 	int len = urb->transfer_buffer_length;
 	int this_sg_len;
 	dma_addr_t data;
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index ce5c9e51748e..c7f33123d4c0 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -65,6 +65,12 @@
 /* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
 #define	XHCI_LEGACY_DISABLE_SMI		((0x3 << 1) + (0xff << 5) + (0x7 << 17))
 
+/* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */
+#define XHCI_L1C               (1 << 16)
+
+/* USB 2.0 xHCI 1.0 hardware LMP capability - section 7.2.2.1.3.2 */
+#define XHCI_HLC               (1 << 19)
+
 /* command register values to disable interrupts and halt the HC */
 /* start/stop HC execution - do not write unless HC is halted*/
 #define XHCI_CMD_RUN		(1 << 0)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 723f8231193d..431efe72b1f7 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -28,6 +28,25 @@
 #define	PORT_RWC_BITS	(PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
 			 PORT_RC | PORT_PLC | PORT_PE)
 
+/* usb 1.1 root hub device descriptor */
+static u8 usb_bos_descriptor [] = {
+	USB_DT_BOS_SIZE,		/*  __u8 bLength, 5 bytes */
+	USB_DT_BOS,			/*  __u8 bDescriptorType */
+	0x0F, 0x00,			/*  __le16 wTotalLength, 15 bytes */
+	0x1,				/*  __u8 bNumDeviceCaps */
+	/* First device capability */
+	USB_DT_USB_SS_CAP_SIZE,		/*  __u8 bLength, 10 bytes */
+	USB_DT_DEVICE_CAPABILITY,	/* Device Capability */
+	USB_SS_CAP_TYPE,		/* bDevCapabilityType, SUPERSPEED_USB */
+	0x00,				/* bmAttributes, LTM off by default */
+	USB_5GBPS_OPERATION, 0x00,	/* wSpeedsSupported, 5Gbps only */
+	0x03,				/* bFunctionalitySupport,
+					   USB 3.0 speed only */
+	0x00,				/* bU1DevExitLat, set later. */
+	0x00, 0x00			/* __le16 bU2DevExitLat, set later. */
+};
+
+
 static void xhci_common_hub_descriptor(struct xhci_hcd *xhci,
 		struct usb_hub_descriptor *desc, int ports)
 {
@@ -232,7 +251,7 @@ int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 			continue;
 		speed = xhci->devs[i]->udev->speed;
 		if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3))
-				&& xhci->devs[i]->port == port) {
+				&& xhci->devs[i]->fake_port == port) {
 			slot_id = i;
 			break;
 		}
@@ -392,13 +411,39 @@ static int xhci_get_ports(struct usb_hcd *hcd, __le32 __iomem ***port_array)
 	return max_ports;
 }
 
+void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
+				int port_id, u32 link_state)
+{
+	u32 temp;
+
+	temp = xhci_readl(xhci, port_array[port_id]);
+	temp = xhci_port_state_to_neutral(temp);
+	temp &= ~PORT_PLS_MASK;
+	temp |= PORT_LINK_STROBE | link_state;
+	xhci_writel(xhci, temp, port_array[port_id]);
+}
+
+/* Test and clear port RWC bit */
+void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
+				int port_id, u32 port_bit)
+{
+	u32 temp;
+
+	temp = xhci_readl(xhci, port_array[port_id]);
+	if (temp & port_bit) {
+		temp = xhci_port_state_to_neutral(temp);
+		temp |= port_bit;
+		xhci_writel(xhci, temp, port_array[port_id]);
+	}
+}
+
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		u16 wIndex, char *buf, u16 wLength)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	int max_ports;
 	unsigned long flags;
-	u32 temp, temp1, status;
+	u32 temp, status;
 	int retval = 0;
 	__le32 __iomem **port_array;
 	int slot_id;
@@ -429,6 +474,21 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		xhci_hub_descriptor(hcd, xhci,
 				(struct usb_hub_descriptor *) buf);
 		break;
+	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+		if ((wValue & 0xff00) != (USB_DT_BOS << 8))
+			goto error;
+
+		if (hcd->speed != HCD_USB3)
+			goto error;
+
+		memcpy(buf, &usb_bos_descriptor,
+				USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE);
+		temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
+		buf[12] = HCS_U1_LATENCY(temp);
+		put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
+
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE;
 	case GetPortStatus:
 		if (!wIndex || wIndex > max_ports)
 			goto error;
@@ -472,11 +532,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				xhci_dbg(xhci, "Resume USB2 port %d\n",
 					wIndex + 1);
 				bus_state->resume_done[wIndex] = 0;
-				temp1 = xhci_port_state_to_neutral(temp);
-				temp1 &= ~PORT_PLS_MASK;
-				temp1 |= PORT_LINK_STROBE | XDEV_U0;
-				xhci_writel(xhci, temp1, port_array[wIndex]);
-
+				xhci_set_link_state(xhci, port_array, wIndex,
+							XDEV_U0);
 				xhci_dbg(xhci, "set port %d resume\n",
 					wIndex + 1);
 				slot_id = xhci_find_slot_id_by_port(hcd, xhci,
@@ -551,10 +608,19 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		switch (wValue) {
 		case USB_PORT_FEAT_SUSPEND:
 			temp = xhci_readl(xhci, port_array[wIndex]);
+			if ((temp & PORT_PLS_MASK) != XDEV_U0) {
+				/* Resume the port to U0 first */
+				xhci_set_link_state(xhci, port_array, wIndex,
+							XDEV_U0);
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				msleep(10);
+				spin_lock_irqsave(&xhci->lock, flags);
+			}
 			/* In spec software should not attempt to suspend
 			 * a port unless the port reports that it is in the
 			 * enabled (PED = ‘1’,PLS < ‘3’) state.
 			 */
+			temp = xhci_readl(xhci, port_array[wIndex]);
 			if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
 				|| (temp & PORT_PLS_MASK) >= XDEV_U3) {
 				xhci_warn(xhci, "USB core suspending device "
@@ -573,10 +639,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			xhci_stop_device(xhci, slot_id, 1);
 			spin_lock_irqsave(&xhci->lock, flags);
 
-			temp = xhci_port_state_to_neutral(temp);
-			temp &= ~PORT_PLS_MASK;
-			temp |= PORT_LINK_STROBE | XDEV_U3;
-			xhci_writel(xhci, temp, port_array[wIndex]);
+			xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3);
 
 			spin_unlock_irqrestore(&xhci->lock, flags);
 			msleep(10); /* wait device to enter */
@@ -610,10 +673,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				}
 			}
 
-			temp = xhci_port_state_to_neutral(temp);
-			temp &= ~PORT_PLS_MASK;
-			temp |= PORT_LINK_STROBE | link_state;
-			xhci_writel(xhci, temp, port_array[wIndex]);
+			xhci_set_link_state(xhci, port_array, wIndex,
+						link_state);
 
 			spin_unlock_irqrestore(&xhci->lock, flags);
 			msleep(20); /* wait device to enter */
@@ -677,24 +738,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				if ((temp & PORT_PE) == 0)
 					goto error;
 
-				temp = xhci_port_state_to_neutral(temp);
-				temp &= ~PORT_PLS_MASK;
-				temp |= PORT_LINK_STROBE | XDEV_RESUME;
-				xhci_writel(xhci, temp,
-						port_array[wIndex]);
-
-				spin_unlock_irqrestore(&xhci->lock,
-						       flags);
+				xhci_set_link_state(xhci, port_array, wIndex,
+							XDEV_RESUME);
+				spin_unlock_irqrestore(&xhci->lock, flags);
 				msleep(20);
 				spin_lock_irqsave(&xhci->lock, flags);
-
-				temp = xhci_readl(xhci,
-						port_array[wIndex]);
-				temp = xhci_port_state_to_neutral(temp);
-				temp &= ~PORT_PLS_MASK;
-				temp |= PORT_LINK_STROBE | XDEV_U0;
-				xhci_writel(xhci, temp,
-						port_array[wIndex]);
+				xhci_set_link_state(xhci, port_array, wIndex,
+							XDEV_U0);
 			}
 			bus_state->port_c_suspend |= 1 << wIndex;
 
@@ -910,25 +960,18 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 		if (test_bit(port_index, &bus_state->bus_suspended) &&
 		    (temp & PORT_PLS_MASK)) {
 			if (DEV_SUPERSPEED(temp)) {
-				temp = xhci_port_state_to_neutral(temp);
-				temp &= ~PORT_PLS_MASK;
-				temp |= PORT_LINK_STROBE | XDEV_U0;
-				xhci_writel(xhci, temp, port_array[port_index]);
+				xhci_set_link_state(xhci, port_array,
+							port_index, XDEV_U0);
 			} else {
-				temp = xhci_port_state_to_neutral(temp);
-				temp &= ~PORT_PLS_MASK;
-				temp |= PORT_LINK_STROBE | XDEV_RESUME;
-				xhci_writel(xhci, temp, port_array[port_index]);
+				xhci_set_link_state(xhci, port_array,
+						port_index, XDEV_RESUME);
 
 				spin_unlock_irqrestore(&xhci->lock, flags);
 				msleep(20);
 				spin_lock_irqsave(&xhci->lock, flags);
 
-				temp = xhci_readl(xhci, port_array[port_index]);
-				temp = xhci_port_state_to_neutral(temp);
-				temp &= ~PORT_PLS_MASK;
-				temp |= PORT_LINK_STROBE | XDEV_U0;
-				xhci_writel(xhci, temp, port_array[port_index]);
+				xhci_set_link_state(xhci, port_array,
+							port_index, XDEV_U0);
 			}
 			/* wait for the port to enter U0 and report port link
 			 * state change.
@@ -938,12 +981,8 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 			spin_lock_irqsave(&xhci->lock, flags);
 
 			/* Clear PLC */
-			temp = xhci_readl(xhci, port_array[port_index]);
-			if (temp & PORT_PLC) {
-				temp = xhci_port_state_to_neutral(temp);
-				temp |= PORT_PLC;
-				xhci_writel(xhci, temp, port_array[port_index]);
-			}
+			xhci_test_and_clear_bit(xhci, port_array, port_index,
+						PORT_PLC);
 
 			slot_id = xhci_find_slot_id_by_port(hcd,
 					xhci, port_index + 1);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index d446886b22b0..42a22b8e6922 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -61,8 +61,6 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, gfp_t flag
 
 static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
 {
-	if (!seg)
-		return;
 	if (seg->trbs) {
 		xhci_dbg(xhci, "Freeing DMA segment at %p (virtual) 0x%llx (DMA)\n",
 				seg->trbs, (unsigned long long)seg->dma);
@@ -81,7 +79,7 @@ static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
  * related flags, such as End TRB, Toggle Cycle, and no snoop.
  */
 static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
-		struct xhci_segment *next, bool link_trbs)
+		struct xhci_segment *next, bool link_trbs, bool isoc)
 {
 	u32 val;
 
@@ -97,7 +95,9 @@ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
 		val &= ~TRB_TYPE_BITMASK;
 		val |= TRB_TYPE(TRB_LINK);
 		/* Always set the chain bit with 0.95 hardware */
-		if (xhci_link_trb_quirk(xhci))
+		/* Set chain bit for isoc rings on AMD 0.96 host */
+		if (xhci_link_trb_quirk(xhci) ||
+				(isoc && (xhci->quirks & XHCI_AMD_0x96_HOST)))
 			val |= TRB_CHAIN;
 		prev->trbs[TRBS_PER_SEGMENT-1].link.control = cpu_to_le32(val);
 	}
@@ -112,18 +112,20 @@ void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring)
 	struct xhci_segment *seg;
 	struct xhci_segment *first_seg;
 
-	if (!ring || !ring->first_seg)
+	if (!ring)
 		return;
-	first_seg = ring->first_seg;
-	seg = first_seg->next;
-	xhci_dbg(xhci, "Freeing ring at %p\n", ring);
-	while (seg != first_seg) {
-		struct xhci_segment *next = seg->next;
-		xhci_segment_free(xhci, seg);
-		seg = next;
+	if (ring->first_seg) {
+		first_seg = ring->first_seg;
+		seg = first_seg->next;
+		xhci_dbg(xhci, "Freeing ring at %p\n", ring);
+		while (seg != first_seg) {
+			struct xhci_segment *next = seg->next;
+			xhci_segment_free(xhci, seg);
+			seg = next;
+		}
+		xhci_segment_free(xhci, first_seg);
+		ring->first_seg = NULL;
 	}
-	xhci_segment_free(xhci, first_seg);
-	ring->first_seg = NULL;
 	kfree(ring);
 }
 
@@ -152,7 +154,7 @@ static void xhci_initialize_ring_info(struct xhci_ring *ring)
  * See section 4.9.1 and figures 15 and 16.
  */
 static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
-		unsigned int num_segs, bool link_trbs, gfp_t flags)
+		unsigned int num_segs, bool link_trbs, bool isoc, gfp_t flags)
 {
 	struct xhci_ring	*ring;
 	struct xhci_segment	*prev;
@@ -178,12 +180,12 @@ static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
 		next = xhci_segment_alloc(xhci, flags);
 		if (!next)
 			goto fail;
-		xhci_link_segments(xhci, prev, next, link_trbs);
+		xhci_link_segments(xhci, prev, next, link_trbs, isoc);
 
 		prev = next;
 		num_segs--;
 	}
-	xhci_link_segments(xhci, prev, ring->first_seg, link_trbs);
+	xhci_link_segments(xhci, prev, ring->first_seg, link_trbs, isoc);
 
 	if (link_trbs) {
 		/* See section 4.9.2.1 and 6.4.4.1 */
@@ -229,14 +231,14 @@ void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci,
  * pointers to the beginning of the ring.
  */
 static void xhci_reinit_cached_ring(struct xhci_hcd *xhci,
-		struct xhci_ring *ring)
+		struct xhci_ring *ring, bool isoc)
 {
 	struct xhci_segment	*seg = ring->first_seg;
 	do {
 		memset(seg->trbs, 0,
 				sizeof(union xhci_trb)*TRBS_PER_SEGMENT);
 		/* All endpoint rings have link TRBs */
-		xhci_link_segments(xhci, seg, seg->next, 1);
+		xhci_link_segments(xhci, seg, seg->next, 1, isoc);
 		seg = seg->next;
 	} while (seg != ring->first_seg);
 	xhci_initialize_ring_info(ring);
@@ -315,7 +317,7 @@ static void xhci_free_stream_ctx(struct xhci_hcd *xhci,
 	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 
 	if (num_stream_ctxs > MEDIUM_STREAM_ARRAY_SIZE)
-		pci_free_consistent(pdev,
+		dma_free_coherent(&pdev->dev,
 				sizeof(struct xhci_stream_ctx)*num_stream_ctxs,
 				stream_ctx, dma);
 	else if (num_stream_ctxs <= SMALL_STREAM_ARRAY_SIZE)
@@ -343,9 +345,9 @@ static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci,
 	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 
 	if (num_stream_ctxs > MEDIUM_STREAM_ARRAY_SIZE)
-		return pci_alloc_consistent(pdev,
+		return dma_alloc_coherent(&pdev->dev,
 				sizeof(struct xhci_stream_ctx)*num_stream_ctxs,
-				dma);
+				dma, mem_flags);
 	else if (num_stream_ctxs <= SMALL_STREAM_ARRAY_SIZE)
 		return dma_pool_alloc(xhci->small_streams_pool,
 				mem_flags, dma);
@@ -540,7 +542,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 	 */
 	for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
 		stream_info->stream_rings[cur_stream] =
-			xhci_ring_alloc(xhci, 1, true, mem_flags);
+			xhci_ring_alloc(xhci, 1, true, false, mem_flags);
 		cur_ring = stream_info->stream_rings[cur_stream];
 		if (!cur_ring)
 			goto cleanup_rings;
@@ -687,11 +689,103 @@ static void xhci_init_endpoint_timer(struct xhci_hcd *xhci,
 	ep->xhci = xhci;
 }
 
-/* All the xhci_tds in the ring's TD list should be freed at this point */
+static void xhci_free_tt_info(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int slot_id)
+{
+	struct list_head *tt;
+	struct list_head *tt_list_head;
+	struct list_head *tt_next;
+	struct xhci_tt_bw_info *tt_info;
+
+	/* If the device never made it past the Set Address stage,
+	 * it may not have the real_port set correctly.
+	 */
+	if (virt_dev->real_port == 0 ||
+			virt_dev->real_port > HCS_MAX_PORTS(xhci->hcs_params1)) {
+		xhci_dbg(xhci, "Bad real port.\n");
+		return;
+	}
+
+	tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts);
+	if (list_empty(tt_list_head))
+		return;
+
+	list_for_each(tt, tt_list_head) {
+		tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
+		if (tt_info->slot_id == slot_id)
+			break;
+	}
+	/* Cautionary measure in case the hub was disconnected before we
+	 * stored the TT information.
+	 */
+	if (tt_info->slot_id != slot_id)
+		return;
+
+	tt_next = tt->next;
+	tt_info = list_entry(tt, struct xhci_tt_bw_info,
+			tt_list);
+	/* Multi-TT hubs will have more than one entry */
+	do {
+		list_del(tt);
+		kfree(tt_info);
+		tt = tt_next;
+		if (list_empty(tt_list_head))
+			break;
+		tt_next = tt->next;
+		tt_info = list_entry(tt, struct xhci_tt_bw_info,
+				tt_list);
+	} while (tt_info->slot_id == slot_id);
+}
+
+int xhci_alloc_tt_info(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		struct usb_device *hdev,
+		struct usb_tt *tt, gfp_t mem_flags)
+{
+	struct xhci_tt_bw_info		*tt_info;
+	unsigned int			num_ports;
+	int				i, j;
+
+	if (!tt->multi)
+		num_ports = 1;
+	else
+		num_ports = hdev->maxchild;
+
+	for (i = 0; i < num_ports; i++, tt_info++) {
+		struct xhci_interval_bw_table *bw_table;
+
+		tt_info = kzalloc(sizeof(*tt_info), mem_flags);
+		if (!tt_info)
+			goto free_tts;
+		INIT_LIST_HEAD(&tt_info->tt_list);
+		list_add(&tt_info->tt_list,
+				&xhci->rh_bw[virt_dev->real_port - 1].tts);
+		tt_info->slot_id = virt_dev->udev->slot_id;
+		if (tt->multi)
+			tt_info->ttport = i+1;
+		bw_table = &tt_info->bw_table;
+		for (j = 0; j < XHCI_MAX_INTERVAL; j++)
+			INIT_LIST_HEAD(&bw_table->interval_bw[j].endpoints);
+	}
+	return 0;
+
+free_tts:
+	xhci_free_tt_info(xhci, virt_dev, virt_dev->udev->slot_id);
+	return -ENOMEM;
+}
+
+
+/* All the xhci_tds in the ring's TD list should be freed at this point.
+ * Should be called with xhci->lock held if there is any chance the TT lists
+ * will be manipulated by the configure endpoint, allocate device, or update
+ * hub functions while this function is removing the TT entries from the list.
+ */
 void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 {
 	struct xhci_virt_device *dev;
 	int i;
+	int old_active_eps = 0;
 
 	/* Slot ID 0 is reserved */
 	if (slot_id == 0 || !xhci->devs[slot_id])
@@ -702,13 +796,29 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 	if (!dev)
 		return;
 
+	if (dev->tt_info)
+		old_active_eps = dev->tt_info->active_eps;
+
 	for (i = 0; i < 31; ++i) {
 		if (dev->eps[i].ring)
 			xhci_ring_free(xhci, dev->eps[i].ring);
 		if (dev->eps[i].stream_info)
 			xhci_free_stream_info(xhci,
 					dev->eps[i].stream_info);
+		/* Endpoints on the TT/root port lists should have been removed
+		 * when usb_disable_device() was called for the device.
+		 * We can't drop them anyway, because the udev might have gone
+		 * away by this point, and we can't tell what speed it was.
+		 */
+		if (!list_empty(&dev->eps[i].bw_endpoint_list))
+			xhci_warn(xhci, "Slot %u endpoint %u "
+					"not removed from BW list!\n",
+					slot_id, i);
 	}
+	/* If this is a hub, free the TT(s) from the TT list */
+	xhci_free_tt_info(xhci, dev, slot_id);
+	/* If necessary, update the number of active TTs on this root port */
+	xhci_update_tt_active_eps(xhci, dev, old_active_eps);
 
 	if (dev->ring_cache) {
 		for (i = 0; i < dev->num_rings_cached; i++)
@@ -762,10 +872,11 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
 	for (i = 0; i < 31; i++) {
 		xhci_init_endpoint_timer(xhci, &dev->eps[i]);
 		INIT_LIST_HEAD(&dev->eps[i].cancelled_td_list);
+		INIT_LIST_HEAD(&dev->eps[i].bw_endpoint_list);
 	}
 
 	/* Allocate endpoint 0 ring */
-	dev->eps[0].ring = xhci_ring_alloc(xhci, 1, true, flags);
+	dev->eps[0].ring = xhci_ring_alloc(xhci, 1, true, false, flags);
 	if (!dev->eps[0].ring)
 		goto fail;
 
@@ -921,9 +1032,40 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
 			top_dev = top_dev->parent)
 		/* Found device below root hub */;
-	dev->port = top_dev->portnum;
+	dev->fake_port = top_dev->portnum;
+	dev->real_port = port_num;
 	xhci_dbg(xhci, "Set root hub portnum to %d\n", port_num);
-	xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->port);
+	xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->fake_port);
+
+	/* Find the right bandwidth table that this device will be a part of.
+	 * If this is a full speed device attached directly to a root port (or a
+	 * decendent of one), it counts as a primary bandwidth domain, not a
+	 * secondary bandwidth domain under a TT.  An xhci_tt_info structure
+	 * will never be created for the HS root hub.
+	 */
+	if (!udev->tt || !udev->tt->hub->parent) {
+		dev->bw_table = &xhci->rh_bw[port_num - 1].bw_table;
+	} else {
+		struct xhci_root_port_bw_info *rh_bw;
+		struct xhci_tt_bw_info *tt_bw;
+
+		rh_bw = &xhci->rh_bw[port_num - 1];
+		/* Find the right TT. */
+		list_for_each_entry(tt_bw, &rh_bw->tts, tt_list) {
+			if (tt_bw->slot_id != udev->tt->hub->slot_id)
+				continue;
+
+			if (!dev->udev->tt->multi ||
+					(udev->tt->multi &&
+					 tt_bw->ttport == dev->udev->ttport)) {
+				dev->bw_table = &tt_bw->bw_table;
+				dev->tt_info = tt_bw;
+				break;
+			}
+		}
+		if (!dev->tt_info)
+			xhci_warn(xhci, "WARN: Didn't find a matching TT\n");
+	}
 
 	/* Is this a LS/FS device under an external HS hub? */
 	if (udev->tt && udev->tt->hub->parent) {
@@ -1141,8 +1283,8 @@ static u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
 	if (udev->speed == USB_SPEED_SUPER)
 		return le16_to_cpu(ep->ss_ep_comp.wBytesPerInterval);
 
-	max_packet = GET_MAX_PACKET(le16_to_cpu(ep->desc.wMaxPacketSize));
-	max_burst = (le16_to_cpu(ep->desc.wMaxPacketSize) & 0x1800) >> 11;
+	max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
+	max_burst = (usb_endpoint_maxp(&ep->desc) & 0x1800) >> 11;
 	/* A 0 in max burst means 1 transfer per ESIT */
 	return max_packet * (max_burst + 1);
 }
@@ -1175,10 +1317,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	 */
 	if (usb_endpoint_xfer_isoc(&ep->desc))
 		virt_dev->eps[ep_index].new_ring =
-			xhci_ring_alloc(xhci, 8, true, mem_flags);
+			xhci_ring_alloc(xhci, 8, true, true, mem_flags);
 	else
 		virt_dev->eps[ep_index].new_ring =
-			xhci_ring_alloc(xhci, 1, true, mem_flags);
+			xhci_ring_alloc(xhci, 1, true, false, mem_flags);
 	if (!virt_dev->eps[ep_index].new_ring) {
 		/* Attempt to use the ring cache */
 		if (virt_dev->num_rings_cached == 0)
@@ -1187,7 +1329,8 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 			virt_dev->ring_cache[virt_dev->num_rings_cached];
 		virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
 		virt_dev->num_rings_cached--;
-		xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring);
+		xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring,
+			usb_endpoint_xfer_isoc(&ep->desc) ? true : false);
 	}
 	virt_dev->eps[ep_index].skip = false;
 	ep_ring = virt_dev->eps[ep_index].new_ring;
@@ -1211,7 +1354,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	/* Set the max packet size and max burst */
 	switch (udev->speed) {
 	case USB_SPEED_SUPER:
-		max_packet = le16_to_cpu(ep->desc.wMaxPacketSize);
+		max_packet = usb_endpoint_maxp(&ep->desc);
 		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
 		/* dig out max burst from ep companion desc */
 		max_packet = ep->ss_ep_comp.bMaxBurst;
@@ -1223,14 +1366,14 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 		 */
 		if (usb_endpoint_xfer_isoc(&ep->desc) ||
 				usb_endpoint_xfer_int(&ep->desc)) {
-			max_burst = (le16_to_cpu(ep->desc.wMaxPacketSize)
+			max_burst = (usb_endpoint_maxp(&ep->desc)
 				     & 0x1800) >> 11;
 			ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_burst));
 		}
 		/* Fall through */
 	case USB_SPEED_FULL:
 	case USB_SPEED_LOW:
-		max_packet = GET_MAX_PACKET(le16_to_cpu(ep->desc.wMaxPacketSize));
+		max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
 		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
 		break;
 	default:
@@ -1286,6 +1429,70 @@ void xhci_endpoint_zero(struct xhci_hcd *xhci,
 	 */
 }
 
+void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info)
+{
+	bw_info->ep_interval = 0;
+	bw_info->mult = 0;
+	bw_info->num_packets = 0;
+	bw_info->max_packet_size = 0;
+	bw_info->type = 0;
+	bw_info->max_esit_payload = 0;
+}
+
+void xhci_update_bw_info(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_input_control_ctx *ctrl_ctx,
+		struct xhci_virt_device *virt_dev)
+{
+	struct xhci_bw_info *bw_info;
+	struct xhci_ep_ctx *ep_ctx;
+	unsigned int ep_type;
+	int i;
+
+	for (i = 1; i < 31; ++i) {
+		bw_info = &virt_dev->eps[i].bw_info;
+
+		/* We can't tell what endpoint type is being dropped, but
+		 * unconditionally clearing the bandwidth info for non-periodic
+		 * endpoints should be harmless because the info will never be
+		 * set in the first place.
+		 */
+		if (!EP_IS_ADDED(ctrl_ctx, i) && EP_IS_DROPPED(ctrl_ctx, i)) {
+			/* Dropped endpoint */
+			xhci_clear_endpoint_bw_info(bw_info);
+			continue;
+		}
+
+		if (EP_IS_ADDED(ctrl_ctx, i)) {
+			ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, i);
+			ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2));
+
+			/* Ignore non-periodic endpoints */
+			if (ep_type != ISOC_OUT_EP && ep_type != INT_OUT_EP &&
+					ep_type != ISOC_IN_EP &&
+					ep_type != INT_IN_EP)
+				continue;
+
+			/* Added or changed endpoint */
+			bw_info->ep_interval = CTX_TO_EP_INTERVAL(
+					le32_to_cpu(ep_ctx->ep_info));
+			/* Number of packets and mult are zero-based in the
+			 * input context, but we want one-based for the
+			 * interval table.
+			 */
+			bw_info->mult = CTX_TO_EP_MULT(
+					le32_to_cpu(ep_ctx->ep_info)) + 1;
+			bw_info->num_packets = CTX_TO_MAX_BURST(
+					le32_to_cpu(ep_ctx->ep_info2)) + 1;
+			bw_info->max_packet_size = MAX_PACKET_DECODED(
+					le32_to_cpu(ep_ctx->ep_info2));
+			bw_info->type = ep_type;
+			bw_info->max_esit_payload = CTX_TO_MAX_ESIT_PAYLOAD(
+					le32_to_cpu(ep_ctx->tx_info));
+		}
+	}
+}
+
 /* Copy output xhci_ep_ctx to the input xhci_ep_ctx copy.
  * Useful when you want to change one particular aspect of the endpoint and then
  * issue a configure endpoint command.
@@ -1344,10 +1551,9 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
 	if (!xhci->scratchpad)
 		goto fail_sp;
 
-	xhci->scratchpad->sp_array =
-		pci_alloc_consistent(to_pci_dev(dev),
+	xhci->scratchpad->sp_array = dma_alloc_coherent(dev,
 				     num_sp * sizeof(u64),
-				     &xhci->scratchpad->sp_dma);
+				     &xhci->scratchpad->sp_dma, flags);
 	if (!xhci->scratchpad->sp_array)
 		goto fail_sp2;
 
@@ -1364,8 +1570,8 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
 	xhci->dcbaa->dev_context_ptrs[0] = cpu_to_le64(xhci->scratchpad->sp_dma);
 	for (i = 0; i < num_sp; i++) {
 		dma_addr_t dma;
-		void *buf = pci_alloc_consistent(to_pci_dev(dev),
-						 xhci->page_size, &dma);
+		void *buf = dma_alloc_coherent(dev, xhci->page_size, &dma,
+				flags);
 		if (!buf)
 			goto fail_sp5;
 
@@ -1378,7 +1584,7 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
 
  fail_sp5:
 	for (i = i - 1; i >= 0; i--) {
-		pci_free_consistent(to_pci_dev(dev), xhci->page_size,
+		dma_free_coherent(dev, xhci->page_size,
 				    xhci->scratchpad->sp_buffers[i],
 				    xhci->scratchpad->sp_dma_buffers[i]);
 	}
@@ -1388,7 +1594,7 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
 	kfree(xhci->scratchpad->sp_buffers);
 
  fail_sp3:
-	pci_free_consistent(to_pci_dev(dev), num_sp * sizeof(u64),
+	dma_free_coherent(dev, num_sp * sizeof(u64),
 			    xhci->scratchpad->sp_array,
 			    xhci->scratchpad->sp_dma);
 
@@ -1412,13 +1618,13 @@ static void scratchpad_free(struct xhci_hcd *xhci)
 	num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
 
 	for (i = 0; i < num_sp; i++) {
-		pci_free_consistent(pdev, xhci->page_size,
+		dma_free_coherent(&pdev->dev, xhci->page_size,
 				    xhci->scratchpad->sp_buffers[i],
 				    xhci->scratchpad->sp_dma_buffers[i]);
 	}
 	kfree(xhci->scratchpad->sp_dma_buffers);
 	kfree(xhci->scratchpad->sp_buffers);
-	pci_free_consistent(pdev, num_sp * sizeof(u64),
+	dma_free_coherent(&pdev->dev, num_sp * sizeof(u64),
 			    xhci->scratchpad->sp_array,
 			    xhci->scratchpad->sp_dma);
 	kfree(xhci->scratchpad);
@@ -1463,18 +1669,10 @@ struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
 
 void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv)
 {
-	int last;
-
-	if (!urb_priv)
-		return;
-
-	last = urb_priv->length - 1;
-	if (last >= 0) {
-		int	i;
-		for (i = 0; i <= last; i++)
-			kfree(urb_priv->td[i]);
+	if (urb_priv) {
+		kfree(urb_priv->td[0]);
+		kfree(urb_priv);
 	}
-	kfree(urb_priv);
 }
 
 void xhci_free_command(struct xhci_hcd *xhci,
@@ -1489,6 +1687,8 @@ void xhci_free_command(struct xhci_hcd *xhci,
 void xhci_mem_cleanup(struct xhci_hcd *xhci)
 {
 	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+	struct dev_info	*dev_info, *next;
+	unsigned long	flags;
 	int size;
 	int i;
 
@@ -1500,7 +1700,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	}
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
 	if (xhci->erst.entries)
-		pci_free_consistent(pdev, size,
+		dma_free_coherent(&pdev->dev, size,
 				xhci->erst.entries, xhci->erst.erst_dma_addr);
 	xhci->erst.entries = NULL;
 	xhci_dbg(xhci, "Freed ERST\n");
@@ -1540,17 +1740,25 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 
 	xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
 	if (xhci->dcbaa)
-		pci_free_consistent(pdev, sizeof(*xhci->dcbaa),
+		dma_free_coherent(&pdev->dev, sizeof(*xhci->dcbaa),
 				xhci->dcbaa, xhci->dcbaa->dma);
 	xhci->dcbaa = NULL;
 
 	scratchpad_free(xhci);
 
+	spin_lock_irqsave(&xhci->lock, flags);
+	list_for_each_entry_safe(dev_info, next, &xhci->lpm_failed_devs, list) {
+		list_del(&dev_info->list);
+		kfree(dev_info);
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
 	xhci->num_usb2_ports = 0;
 	xhci->num_usb3_ports = 0;
 	kfree(xhci->usb2_ports);
 	kfree(xhci->usb3_ports);
 	kfree(xhci->port_array);
+	kfree(xhci->rh_bw);
 
 	xhci->page_size = 0;
 	xhci->page_shift = 0;
@@ -1762,6 +1970,23 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
 	if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
 		/* WTF? "Valid values are ‘1’ to MaxPorts" */
 		return;
+
+	/* Check the host's USB2 LPM capability */
+	if ((xhci->hci_version == 0x96) && (major_revision != 0x03) &&
+			(temp & XHCI_L1C)) {
+		xhci_dbg(xhci, "xHCI 0.96: support USB2 software lpm\n");
+		xhci->sw_lpm_support = 1;
+	}
+
+	if ((xhci->hci_version >= 0x100) && (major_revision != 0x03)) {
+		xhci_dbg(xhci, "xHCI 1.0: support USB2 software lpm\n");
+		xhci->sw_lpm_support = 1;
+		if (temp & XHCI_HLC) {
+			xhci_dbg(xhci, "xHCI 1.0: support USB2 hardware lpm\n");
+			xhci->hw_lpm_support = 1;
+		}
+	}
+
 	port_offset--;
 	for (i = port_offset; i < (port_offset + port_count); i++) {
 		/* Duplicate entry.  Ignore the port if the revisions differ. */
@@ -1806,7 +2031,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 	__le32 __iomem *addr;
 	u32 offset;
 	unsigned int num_ports;
-	int i, port_index;
+	int i, j, port_index;
 
 	addr = &xhci->cap_regs->hcc_params;
 	offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
@@ -1821,6 +2046,18 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 	if (!xhci->port_array)
 		return -ENOMEM;
 
+	xhci->rh_bw = kzalloc(sizeof(*xhci->rh_bw)*num_ports, flags);
+	if (!xhci->rh_bw)
+		return -ENOMEM;
+	for (i = 0; i < num_ports; i++) {
+		struct xhci_interval_bw_table *bw_table;
+
+		INIT_LIST_HEAD(&xhci->rh_bw[i].tts);
+		bw_table = &xhci->rh_bw[i].bw_table;
+		for (j = 0; j < XHCI_MAX_INTERVAL; j++)
+			INIT_LIST_HEAD(&bw_table->interval_bw[j].endpoints);
+	}
+
 	/*
 	 * For whatever reason, the first capability offset is from the
 	 * capability register base, not from the HCCPARAMS register.
@@ -1959,8 +2196,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	 * Section 5.4.8 - doorbell array must be
 	 * "physically contiguous and 64-byte (cache line) aligned".
 	 */
-	xhci->dcbaa = pci_alloc_consistent(to_pci_dev(dev),
-			sizeof(*xhci->dcbaa), &dma);
+	xhci->dcbaa = dma_alloc_coherent(dev, sizeof(*xhci->dcbaa), &dma,
+			GFP_KERNEL);
 	if (!xhci->dcbaa)
 		goto fail;
 	memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa));
@@ -1994,14 +2231,14 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 		dma_pool_create("xHCI 1KB stream ctx arrays",
 			dev, MEDIUM_STREAM_ARRAY_SIZE, 16, 0);
 	/* Any stream context array bigger than MEDIUM_STREAM_ARRAY_SIZE
-	 * will be allocated with pci_alloc_consistent()
+	 * will be allocated with dma_alloc_coherent()
 	 */
 
 	if (!xhci->small_streams_pool || !xhci->medium_streams_pool)
 		goto fail;
 
 	/* Set up the command ring to have one segments for now. */
-	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, true, flags);
+	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, true, false, flags);
 	if (!xhci->cmd_ring)
 		goto fail;
 	xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
@@ -2032,14 +2269,16 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	 * the event ring segment table (ERST).  Section 4.9.3.
 	 */
 	xhci_dbg(xhci, "// Allocating event ring\n");
-	xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, false, flags);
+	xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, false, false,
+						flags);
 	if (!xhci->event_ring)
 		goto fail;
 	if (xhci_check_trb_in_td_math(xhci, flags) < 0)
 		goto fail;
 
-	xhci->erst.entries = pci_alloc_consistent(to_pci_dev(dev),
-			sizeof(struct xhci_erst_entry)*ERST_NUM_SEGS, &dma);
+	xhci->erst.entries = dma_alloc_coherent(dev,
+			sizeof(struct xhci_erst_entry) * ERST_NUM_SEGS, &dma,
+			GFP_KERNEL);
 	if (!xhci->erst.entries)
 		goto fail;
 	xhci_dbg(xhci, "// Allocated event ring segment table at 0x%llx\n",
@@ -2102,6 +2341,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	if (xhci_setup_port_arrays(xhci, flags))
 		goto fail;
 
+	INIT_LIST_HEAD(&xhci->lpm_failed_devs);
+
 	return 0;
 
 fail:
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index cb16de213f64..9f51f88cc0f5 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -51,61 +51,9 @@ static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
 	return 0;
 }
 
-/* called during probe() after chip reset completes */
-static int xhci_pci_setup(struct usb_hcd *hcd)
+static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 {
-	struct xhci_hcd		*xhci;
-	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
-	int			retval;
-	u32			temp;
-
-	hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2;
-
-	if (usb_hcd_is_primary_hcd(hcd)) {
-		xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
-		if (!xhci)
-			return -ENOMEM;
-		*((struct xhci_hcd **) hcd->hcd_priv) = xhci;
-		xhci->main_hcd = hcd;
-		/* Mark the first roothub as being USB 2.0.
-		 * The xHCI driver will register the USB 3.0 roothub.
-		 */
-		hcd->speed = HCD_USB2;
-		hcd->self.root_hub->speed = USB_SPEED_HIGH;
-		/*
-		 * USB 2.0 roothub under xHCI has an integrated TT,
-		 * (rate matching hub) as opposed to having an OHCI/UHCI
-		 * companion controller.
-		 */
-		hcd->has_tt = 1;
-	} else {
-		/* xHCI private pointer was set in xhci_pci_probe for the second
-		 * registered roothub.
-		 */
-		xhci = hcd_to_xhci(hcd);
-		temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
-		if (HCC_64BIT_ADDR(temp)) {
-			xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
-			dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
-		} else {
-			dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
-		}
-		return 0;
-	}
-
-	xhci->cap_regs = hcd->regs;
-	xhci->op_regs = hcd->regs +
-		HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
-	xhci->run_regs = hcd->regs +
-		(xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
-	/* Cache read-only capability registers */
-	xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
-	xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
-	xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
-	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
-	xhci->hci_version = HC_VERSION(xhci->hcc_params);
-	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
-	xhci_print_registers(xhci);
+	struct pci_dev		*pdev = to_pci_dev(dev);
 
 	/* Look for vendor-specific quirks */
 	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
@@ -128,6 +76,9 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 	if (pdev->vendor == PCI_VENDOR_ID_NEC)
 		xhci->quirks |= XHCI_NEC_HOST;
 
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
+		xhci->quirks |= XHCI_AMD_0x96_HOST;
+
 	/* AMD PLL quirk */
 	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
 		xhci->quirks |= XHCI_AMD_PLL_FIX;
@@ -136,39 +87,29 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
 		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
 		xhci->limit_active_eps = 64;
+		xhci->quirks |= XHCI_SW_BW_CHECKING;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 		xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
 	}
+}
 
-	/* Make sure the HC is halted. */
-	retval = xhci_halt(xhci);
-	if (retval)
-		goto error;
+/* called during probe() after chip reset completes */
+static int xhci_pci_setup(struct usb_hcd *hcd)
+{
+	struct xhci_hcd		*xhci;
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+	int			retval;
 
-	xhci_dbg(xhci, "Resetting HCD\n");
-	/* Reset the internal HC memory state and registers. */
-	retval = xhci_reset(xhci);
+	retval = xhci_gen_setup(hcd, xhci_pci_quirks);
 	if (retval)
-		goto error;
-	xhci_dbg(xhci, "Reset complete\n");
-
-	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
-	if (HCC_64BIT_ADDR(temp)) {
-		xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
-		dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
-	} else {
-		dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
-	}
+		return retval;
 
-	xhci_dbg(xhci, "Calling HCD init\n");
-	/* Initialize HCD and host controller data structures. */
-	retval = xhci_init(hcd);
-	if (retval)
-		goto error;
-	xhci_dbg(xhci, "Called HCD init\n");
+	xhci = hcd_to_xhci(hcd);
+	if (!usb_hcd_is_primary_hcd(hcd))
+		return 0;
 
 	pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
 	xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
@@ -178,7 +119,6 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 	if (!retval)
 		return retval;
 
-error:
 	kfree(xhci);
 	return retval;
 }
@@ -222,7 +162,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	*((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;
 
 	retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
-			IRQF_DISABLED | IRQF_SHARED);
+			IRQF_SHARED);
 	if (retval)
 		goto put_usb3_hcd;
 	/* Roothub already marked as USB 3.0 speed */
@@ -344,6 +284,11 @@ static const struct hc_driver xhci_pci_hc_driver = {
 	.hub_status_data =	xhci_hub_status_data,
 	.bus_suspend =		xhci_bus_suspend,
 	.bus_resume =		xhci_bus_resume,
+	/*
+	 * call back when device connected and addressed
+	 */
+	.update_device =        xhci_update_device,
+	.set_usb2_hw_lpm =	xhci_set_usb2_hardware_lpm,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -375,12 +320,12 @@ static struct pci_driver xhci_pci_driver = {
 #endif
 };
 
-int xhci_register_pci(void)
+int __init xhci_register_pci(void)
 {
 	return pci_register_driver(&xhci_pci_driver);
 }
 
-void xhci_unregister_pci(void)
+void __exit xhci_unregister_pci(void)
 {
 	pci_unregister_driver(&xhci_pci_driver);
 }
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 952e2ded61af..940321b3ec68 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -185,7 +185,7 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
  *			prepare_transfer()?
  */
 static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
-		bool consumer, bool more_trbs_coming)
+		bool consumer, bool more_trbs_coming, bool isoc)
 {
 	u32 chain;
 	union xhci_trb *next;
@@ -212,11 +212,13 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
 				if (!chain && !more_trbs_coming)
 					break;
 
-				/* If we're not dealing with 0.95 hardware,
+				/* If we're not dealing with 0.95 hardware or
+				 * isoc rings on AMD 0.96 host,
 				 * carry over the chain bit of the previous TRB
 				 * (which may mean the chain bit is cleared).
 				 */
-				if (!xhci_link_trb_quirk(xhci)) {
+				if (!(isoc && (xhci->quirks & XHCI_AMD_0x96_HOST))
+						&& !xhci_link_trb_quirk(xhci)) {
 					next->link.control &=
 						cpu_to_le32(~TRB_CHAIN);
 					next->link.control |=
@@ -1329,10 +1331,8 @@ static void handle_port_status(struct xhci_hcd *xhci,
 
 		if (DEV_SUPERSPEED(temp)) {
 			xhci_dbg(xhci, "resume SS port %d\n", port_id);
-			temp = xhci_port_state_to_neutral(temp);
-			temp &= ~PORT_PLS_MASK;
-			temp |= PORT_LINK_STROBE | XDEV_U0;
-			xhci_writel(xhci, temp, port_array[faked_port_index]);
+			xhci_set_link_state(xhci, port_array, faked_port_index,
+						XDEV_U0);
 			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 					faked_port_index);
 			if (!slot_id) {
@@ -1342,10 +1342,8 @@ static void handle_port_status(struct xhci_hcd *xhci,
 			xhci_ring_device(xhci, slot_id);
 			xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
 			/* Clear PORT_PLC */
-			temp = xhci_readl(xhci, port_array[faked_port_index]);
-			temp = xhci_port_state_to_neutral(temp);
-			temp |= PORT_PLC;
-			xhci_writel(xhci, temp, port_array[faked_port_index]);
+			xhci_test_and_clear_bit(xhci, port_array,
+						faked_port_index, PORT_PLC);
 		} else {
 			xhci_dbg(xhci, "resume HS port %d\n", port_id);
 			bus_state->resume_done[faked_port_index] = jiffies +
@@ -1356,6 +1354,10 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		}
 	}
 
+	if (hcd->speed != HCD_USB3)
+		xhci_test_and_clear_bit(xhci, port_array, faked_port_index,
+					PORT_PLC);
+
 cleanup:
 	/* Update event ring dequeue pointer before dropping the lock */
 	inc_deq(xhci, xhci->event_ring, true);
@@ -2192,7 +2194,8 @@ cleanup:
 			if ((urb->actual_length != urb->transfer_buffer_length &&
 						(urb->transfer_flags &
 						 URB_SHORT_NOT_OK)) ||
-					status != 0)
+					(status != 0 &&
+					 !usb_endpoint_xfer_isoc(&urb->ep->desc)))
 				xhci_dbg(xhci, "Giveback URB %p, len = %d, "
 						"expected = %x, status = %d\n",
 						urb, urb->actual_length,
@@ -2409,7 +2412,7 @@ irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
  *			prepare_transfer()?
  */
 static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
-		bool consumer, bool more_trbs_coming,
+		bool consumer, bool more_trbs_coming, bool isoc,
 		u32 field1, u32 field2, u32 field3, u32 field4)
 {
 	struct xhci_generic_trb *trb;
@@ -2419,7 +2422,7 @@ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
 	trb->field[1] = cpu_to_le32(field2);
 	trb->field[2] = cpu_to_le32(field3);
 	trb->field[3] = cpu_to_le32(field4);
-	inc_enq(xhci, ring, consumer, more_trbs_coming);
+	inc_enq(xhci, ring, consumer, more_trbs_coming, isoc);
 }
 
 /*
@@ -2427,7 +2430,7 @@ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
  * FIXME allocate segments if the ring is full.
  */
 static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
-		u32 ep_state, unsigned int num_trbs, gfp_t mem_flags)
+		u32 ep_state, unsigned int num_trbs, bool isoc, gfp_t mem_flags)
 {
 	/* Make sure the endpoint has been added to xHC schedule */
 	switch (ep_state) {
@@ -2469,10 +2472,11 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
 		next = ring->enqueue;
 
 		while (last_trb(xhci, ring, ring->enq_seg, next)) {
-			/* If we're not dealing with 0.95 hardware,
-			 * clear the chain bit.
+			/* If we're not dealing with 0.95 hardware or isoc rings
+			 * on AMD 0.96 host, clear the chain bit.
 			 */
-			if (!xhci_link_trb_quirk(xhci))
+			if (!xhci_link_trb_quirk(xhci) && !(isoc &&
+					(xhci->quirks & XHCI_AMD_0x96_HOST)))
 				next->link.control &= cpu_to_le32(~TRB_CHAIN);
 			else
 				next->link.control |= cpu_to_le32(TRB_CHAIN);
@@ -2505,6 +2509,7 @@ static int prepare_transfer(struct xhci_hcd *xhci,
 		unsigned int num_trbs,
 		struct urb *urb,
 		unsigned int td_index,
+		bool isoc,
 		gfp_t mem_flags)
 {
 	int ret;
@@ -2522,7 +2527,7 @@ static int prepare_transfer(struct xhci_hcd *xhci,
 
 	ret = prepare_ring(xhci, ep_ring,
 			   le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK,
-			   num_trbs, mem_flags);
+			   num_trbs, isoc, mem_flags);
 	if (ret)
 		return ret;
 
@@ -2711,7 +2716,7 @@ static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len,
 	 * running_total.
 	 */
 	packets_transferred = (running_total + trb_buff_len) /
-		le16_to_cpu(urb->ep->desc.wMaxPacketSize);
+		usb_endpoint_maxp(&urb->ep->desc);
 
 	return xhci_td_remainder(total_packet_count - packets_transferred);
 }
@@ -2741,11 +2746,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	num_trbs = count_sg_trbs_needed(xhci, urb);
 	num_sgs = urb->num_sgs;
 	total_packet_count = roundup(urb->transfer_buffer_length,
-			le16_to_cpu(urb->ep->desc.wMaxPacketSize));
+			usb_endpoint_maxp(&urb->ep->desc));
 
 	trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
 			ep_index, urb->stream_id,
-			num_trbs, urb, 0, mem_flags);
+			num_trbs, urb, 0, false, mem_flags);
 	if (trb_buff_len < 0)
 		return trb_buff_len;
 
@@ -2840,7 +2845,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 			more_trbs_coming = true;
 		else
 			more_trbs_coming = false;
-		queue_trb(xhci, ep_ring, false, more_trbs_coming,
+		queue_trb(xhci, ep_ring, false, more_trbs_coming, false,
 				lower_32_bits(addr),
 				upper_32_bits(addr),
 				length_field,
@@ -2931,7 +2936,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
 	ret = prepare_transfer(xhci, xhci->devs[slot_id],
 			ep_index, urb->stream_id,
-			num_trbs, urb, 0, mem_flags);
+			num_trbs, urb, 0, false, mem_flags);
 	if (ret < 0)
 		return ret;
 
@@ -2948,7 +2953,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
 	running_total = 0;
 	total_packet_count = roundup(urb->transfer_buffer_length,
-			le16_to_cpu(urb->ep->desc.wMaxPacketSize));
+			usb_endpoint_maxp(&urb->ep->desc));
 	/* How much data is in the first TRB? */
 	addr = (u64) urb->transfer_dma;
 	trb_buff_len = TRB_MAX_BUFF_SIZE -
@@ -3003,7 +3008,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 			more_trbs_coming = true;
 		else
 			more_trbs_coming = false;
-		queue_trb(xhci, ep_ring, false, more_trbs_coming,
+		queue_trb(xhci, ep_ring, false, more_trbs_coming, false,
 				lower_32_bits(addr),
 				upper_32_bits(addr),
 				length_field,
@@ -3063,7 +3068,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		num_trbs++;
 	ret = prepare_transfer(xhci, xhci->devs[slot_id],
 			ep_index, urb->stream_id,
-			num_trbs, urb, 0, mem_flags);
+			num_trbs, urb, 0, false, mem_flags);
 	if (ret < 0)
 		return ret;
 
@@ -3096,7 +3101,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		}
 	}
 
-	queue_trb(xhci, ep_ring, false, true,
+	queue_trb(xhci, ep_ring, false, true, false,
 		  setup->bRequestType | setup->bRequest << 8 | le16_to_cpu(setup->wValue) << 16,
 		  le16_to_cpu(setup->wIndex) | le16_to_cpu(setup->wLength) << 16,
 		  TRB_LEN(8) | TRB_INTR_TARGET(0),
@@ -3116,7 +3121,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	if (urb->transfer_buffer_length > 0) {
 		if (setup->bRequestType & USB_DIR_IN)
 			field |= TRB_DIR_IN;
-		queue_trb(xhci, ep_ring, false, true,
+		queue_trb(xhci, ep_ring, false, true, false,
 				lower_32_bits(urb->transfer_dma),
 				upper_32_bits(urb->transfer_dma),
 				length_field,
@@ -3132,7 +3137,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		field = 0;
 	else
 		field = TRB_DIR_IN;
-	queue_trb(xhci, ep_ring, false, false,
+	queue_trb(xhci, ep_ring, false, false, false,
 			0,
 			0,
 			TRB_INTR_TARGET(0),
@@ -3269,7 +3274,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		td_len = urb->iso_frame_desc[i].length;
 		td_remain_len = td_len;
 		total_packet_count = roundup(td_len,
-				le16_to_cpu(urb->ep->desc.wMaxPacketSize));
+				usb_endpoint_maxp(&urb->ep->desc));
 		/* A zero-length transfer still involves at least one packet. */
 		if (total_packet_count == 0)
 			total_packet_count++;
@@ -3281,7 +3286,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		trbs_per_td = count_isoc_trbs_needed(xhci, urb, i);
 
 		ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
-				urb->stream_id, trbs_per_td, urb, i, mem_flags);
+				urb->stream_id, trbs_per_td, urb, i, true,
+				mem_flags);
 		if (ret < 0) {
 			if (i == 0)
 				return ret;
@@ -3351,7 +3357,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 				remainder |
 				TRB_INTR_TARGET(0);
 
-			queue_trb(xhci, ep_ring, false, more_trbs_coming,
+			queue_trb(xhci, ep_ring, false, more_trbs_coming, true,
 				lower_32_bits(addr),
 				upper_32_bits(addr),
 				length_field,
@@ -3433,7 +3439,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
 	 * Do not insert any td of the urb to the ring if the check failed.
 	 */
 	ret = prepare_ring(xhci, ep_ring, le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK,
-			   num_trbs, mem_flags);
+			   num_trbs, true, mem_flags);
 	if (ret)
 		return ret;
 
@@ -3492,7 +3498,7 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
 		reserved_trbs++;
 
 	ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
-			reserved_trbs, GFP_ATOMIC);
+			reserved_trbs, false, GFP_ATOMIC);
 	if (ret < 0) {
 		xhci_err(xhci, "ERR: No room for command on command ring\n");
 		if (command_must_succeed)
@@ -3500,8 +3506,8 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
 					"unfailable commands failed.\n");
 		return ret;
 	}
-	queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3,
-			field4 | xhci->cmd_ring->cycle_state);
+	queue_trb(xhci, xhci->cmd_ring, false, false, false, field1, field2,
+			field3,	field4 | xhci->cmd_ring->cycle_state);
 	return 0;
 }
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3a0f695138f4..1ff95a0df576 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -175,28 +175,19 @@ int xhci_reset(struct xhci_hcd *xhci)
 	return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
 }
 
-/*
- * Free IRQs
- * free all IRQs request
- */
-static void xhci_free_irq(struct xhci_hcd *xhci)
+#ifdef CONFIG_PCI
+static int xhci_free_msi(struct xhci_hcd *xhci)
 {
 	int i;
-	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 
-	/* return if using legacy interrupt */
-	if (xhci_to_hcd(xhci)->irq >= 0)
-		return;
-
-	if (xhci->msix_entries) {
-		for (i = 0; i < xhci->msix_count; i++)
-			if (xhci->msix_entries[i].vector)
-				free_irq(xhci->msix_entries[i].vector,
-						xhci_to_hcd(xhci));
-	} else if (pdev->irq >= 0)
-		free_irq(pdev->irq, xhci_to_hcd(xhci));
+	if (!xhci->msix_entries)
+		return -EINVAL;
 
-	return;
+	for (i = 0; i < xhci->msix_count; i++)
+		if (xhci->msix_entries[i].vector)
+			free_irq(xhci->msix_entries[i].vector,
+					xhci_to_hcd(xhci));
+	return 0;
 }
 
 /*
@@ -224,6 +215,28 @@ static int xhci_setup_msi(struct xhci_hcd *xhci)
 }
 
 /*
+ * Free IRQs
+ * free all IRQs request
+ */
+static void xhci_free_irq(struct xhci_hcd *xhci)
+{
+	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+	int ret;
+
+	/* return if using legacy interrupt */
+	if (xhci_to_hcd(xhci)->irq >= 0)
+		return;
+
+	ret = xhci_free_msi(xhci);
+	if (!ret)
+		return;
+	if (pdev->irq >= 0)
+		free_irq(pdev->irq, xhci_to_hcd(xhci));
+
+	return;
+}
+
+/*
  * Set up MSI-X
  */
 static int xhci_setup_msix(struct xhci_hcd *xhci)
@@ -302,6 +315,72 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci)
 	return;
 }
 
+static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+{
+	int i;
+
+	if (xhci->msix_entries) {
+		for (i = 0; i < xhci->msix_count; i++)
+			synchronize_irq(xhci->msix_entries[i].vector);
+	}
+}
+
+static int xhci_try_enable_msi(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct pci_dev  *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+	int ret;
+
+	/*
+	 * Some Fresco Logic host controllers advertise MSI, but fail to
+	 * generate interrupts.  Don't even try to enable MSI.
+	 */
+	if (xhci->quirks & XHCI_BROKEN_MSI)
+		return 0;
+
+	/* unregister the legacy interrupt */
+	if (hcd->irq)
+		free_irq(hcd->irq, hcd);
+	hcd->irq = -1;
+
+	ret = xhci_setup_msix(xhci);
+	if (ret)
+		/* fall back to msi*/
+		ret = xhci_setup_msi(xhci);
+
+	if (!ret)
+		/* hcd->irq is -1, we have MSI */
+		return 0;
+
+	/* fall back to legacy interrupt*/
+	ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
+			hcd->irq_descr, hcd);
+	if (ret) {
+		xhci_err(xhci, "request interrupt %d failed\n",
+				pdev->irq);
+		return ret;
+	}
+	hcd->irq = pdev->irq;
+	return 0;
+}
+
+#else
+
+static int xhci_try_enable_msi(struct usb_hcd *hcd)
+{
+	return 0;
+}
+
+static void xhci_cleanup_msix(struct xhci_hcd *xhci)
+{
+}
+
+static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+{
+}
+
+#endif
+
 /*
  * Initialize memory for HCD and xHC (one-time init).
  *
@@ -316,7 +395,7 @@ int xhci_init(struct usb_hcd *hcd)
 
 	xhci_dbg(xhci, "xhci_init\n");
 	spin_lock_init(&xhci->lock);
-	if (link_quirk) {
+	if (xhci->hci_version == 0x95 && link_quirk) {
 		xhci_dbg(xhci, "QUIRK: Not clearing Link TRB chain bits.\n");
 		xhci->quirks |= XHCI_LINK_TRB_QUIRK;
 	} else {
@@ -413,9 +492,8 @@ int xhci_run(struct usb_hcd *hcd)
 {
 	u32 temp;
 	u64 temp_64;
-	u32 ret;
+	int ret;
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-	struct pci_dev  *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 
 	/* Start the xHCI host controller running only after the USB 2.0 roothub
 	 * is setup.
@@ -426,34 +504,10 @@ int xhci_run(struct usb_hcd *hcd)
 		return xhci_run_finished(xhci);
 
 	xhci_dbg(xhci, "xhci_run\n");
-	/* unregister the legacy interrupt */
-	if (hcd->irq)
-		free_irq(hcd->irq, hcd);
-	hcd->irq = -1;
-
-	/* Some Fresco Logic host controllers advertise MSI, but fail to
-	 * generate interrupts.  Don't even try to enable MSI.
-	 */
-	if (xhci->quirks & XHCI_BROKEN_MSI)
-		goto legacy_irq;
 
-	ret = xhci_setup_msix(xhci);
+	ret = xhci_try_enable_msi(hcd);
 	if (ret)
-		/* fall back to msi*/
-		ret = xhci_setup_msi(xhci);
-
-	if (ret) {
-legacy_irq:
-		/* fall back to legacy interrupt*/
-		ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
-					hcd->irq_descr, hcd);
-		if (ret) {
-			xhci_err(xhci, "request interrupt %d failed\n",
-					pdev->irq);
-			return ret;
-		}
-		hcd->irq = pdev->irq;
-	}
+		return ret;
 
 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
 	init_timer(&xhci->event_ring_timer);
@@ -694,7 +748,6 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	int			rc = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	u32			command;
-	int			i;
 
 	spin_lock_irq(&xhci->lock);
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
@@ -730,10 +783,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
 
 	/* step 5: remove core well power */
 	/* synchronize irq when using MSI-X */
-	if (xhci->msix_entries) {
-		for (i = 0; i < xhci->msix_count; i++)
-			synchronize_irq(xhci->msix_entries[i].vector);
-	}
+	xhci_msix_sync_irqs(xhci);
 
 	return rc;
 }
@@ -945,8 +995,7 @@ static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
 		return -ENODEV;
 
 	if (check_virt_dev) {
-		if (!udev->slot_id || !xhci->devs
-			|| !xhci->devs[udev->slot_id]) {
+		if (!udev->slot_id || !xhci->devs[udev->slot_id]) {
 			printk(KERN_DEBUG "xHCI %s called with unaddressed "
 						"device\n", func);
 			return -EINVAL;
@@ -987,7 +1036,7 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
 	out_ctx = xhci->devs[slot_id]->out_ctx;
 	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
 	hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2));
-	max_packet_size = le16_to_cpu(urb->dev->ep0.desc.wMaxPacketSize);
+	max_packet_size = usb_endpoint_maxp(&urb->dev->ep0.desc);
 	if (hw_max_packet_size != max_packet_size) {
 		xhci_dbg(xhci, "Max Packet Size for ep 0 changed.\n");
 		xhci_dbg(xhci, "Max packet size in usb_device = %d\n",
@@ -1035,6 +1084,7 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
 int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct xhci_td *buffer;
 	unsigned long flags;
 	int ret = 0;
 	unsigned int slot_id, ep_index;
@@ -1065,13 +1115,15 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 	if (!urb_priv)
 		return -ENOMEM;
 
+	buffer = kzalloc(size * sizeof(struct xhci_td), mem_flags);
+	if (!buffer) {
+		kfree(urb_priv);
+		return -ENOMEM;
+	}
+
 	for (i = 0; i < size; i++) {
-		urb_priv->td[i] = kzalloc(sizeof(struct xhci_td), mem_flags);
-		if (!urb_priv->td[i]) {
-			urb_priv->length = i;
-			xhci_urb_free_priv(xhci, urb_priv);
-			return -ENOMEM;
-		}
+		urb_priv->td[i] = buffer;
+		buffer++;
 	}
 
 	urb_priv->length = size;
@@ -1747,6 +1799,564 @@ static void xhci_finish_resource_reservation(struct xhci_hcd *xhci,
 				xhci->num_active_eps);
 }
 
+unsigned int xhci_get_block_size(struct usb_device *udev)
+{
+	switch (udev->speed) {
+	case USB_SPEED_LOW:
+	case USB_SPEED_FULL:
+		return FS_BLOCK;
+	case USB_SPEED_HIGH:
+		return HS_BLOCK;
+	case USB_SPEED_SUPER:
+		return SS_BLOCK;
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_WIRELESS:
+	default:
+		/* Should never happen */
+		return 1;
+	}
+}
+
+unsigned int xhci_get_largest_overhead(struct xhci_interval_bw *interval_bw)
+{
+	if (interval_bw->overhead[LS_OVERHEAD_TYPE])
+		return LS_OVERHEAD;
+	if (interval_bw->overhead[FS_OVERHEAD_TYPE])
+		return FS_OVERHEAD;
+	return HS_OVERHEAD;
+}
+
+/* If we are changing a LS/FS device under a HS hub,
+ * make sure (if we are activating a new TT) that the HS bus has enough
+ * bandwidth for this new TT.
+ */
+static int xhci_check_tt_bw_table(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int old_active_eps)
+{
+	struct xhci_interval_bw_table *bw_table;
+	struct xhci_tt_bw_info *tt_info;
+
+	/* Find the bandwidth table for the root port this TT is attached to. */
+	bw_table = &xhci->rh_bw[virt_dev->real_port - 1].bw_table;
+	tt_info = virt_dev->tt_info;
+	/* If this TT already had active endpoints, the bandwidth for this TT
+	 * has already been added.  Removing all periodic endpoints (and thus
+	 * making the TT enactive) will only decrease the bandwidth used.
+	 */
+	if (old_active_eps)
+		return 0;
+	if (old_active_eps == 0 && tt_info->active_eps != 0) {
+		if (bw_table->bw_used + TT_HS_OVERHEAD > HS_BW_LIMIT)
+			return -ENOMEM;
+		return 0;
+	}
+	/* Not sure why we would have no new active endpoints...
+	 *
+	 * Maybe because of an Evaluate Context change for a hub update or a
+	 * control endpoint 0 max packet size change?
+	 * FIXME: skip the bandwidth calculation in that case.
+	 */
+	return 0;
+}
+
+static int xhci_check_ss_bw(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev)
+{
+	unsigned int bw_reserved;
+
+	bw_reserved = DIV_ROUND_UP(SS_BW_RESERVED*SS_BW_LIMIT_IN, 100);
+	if (virt_dev->bw_table->ss_bw_in > (SS_BW_LIMIT_IN - bw_reserved))
+		return -ENOMEM;
+
+	bw_reserved = DIV_ROUND_UP(SS_BW_RESERVED*SS_BW_LIMIT_OUT, 100);
+	if (virt_dev->bw_table->ss_bw_out > (SS_BW_LIMIT_OUT - bw_reserved))
+		return -ENOMEM;
+
+	return 0;
+}
+
+/*
+ * This algorithm is a very conservative estimate of the worst-case scheduling
+ * scenario for any one interval.  The hardware dynamically schedules the
+ * packets, so we can't tell which microframe could be the limiting factor in
+ * the bandwidth scheduling.  This only takes into account periodic endpoints.
+ *
+ * Obviously, we can't solve an NP complete problem to find the minimum worst
+ * case scenario.  Instead, we come up with an estimate that is no less than
+ * the worst case bandwidth used for any one microframe, but may be an
+ * over-estimate.
+ *
+ * We walk the requirements for each endpoint by interval, starting with the
+ * smallest interval, and place packets in the schedule where there is only one
+ * possible way to schedule packets for that interval.  In order to simplify
+ * this algorithm, we record the largest max packet size for each interval, and
+ * assume all packets will be that size.
+ *
+ * For interval 0, we obviously must schedule all packets for each interval.
+ * The bandwidth for interval 0 is just the amount of data to be transmitted
+ * (the sum of all max ESIT payload sizes, plus any overhead per packet times
+ * the number of packets).
+ *
+ * For interval 1, we have two possible microframes to schedule those packets
+ * in.  For this algorithm, if we can schedule the same number of packets for
+ * each possible scheduling opportunity (each microframe), we will do so.  The
+ * remaining number of packets will be saved to be transmitted in the gaps in
+ * the next interval's scheduling sequence.
+ *
+ * As we move those remaining packets to be scheduled with interval 2 packets,
+ * we have to double the number of remaining packets to transmit.  This is
+ * because the intervals are actually powers of 2, and we would be transmitting
+ * the previous interval's packets twice in this interval.  We also have to be
+ * sure that when we look at the largest max packet size for this interval, we
+ * also look at the largest max packet size for the remaining packets and take
+ * the greater of the two.
+ *
+ * The algorithm continues to evenly distribute packets in each scheduling
+ * opportunity, and push the remaining packets out, until we get to the last
+ * interval.  Then those packets and their associated overhead are just added
+ * to the bandwidth used.
+ */
+static int xhci_check_bw_table(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int old_active_eps)
+{
+	unsigned int bw_reserved;
+	unsigned int max_bandwidth;
+	unsigned int bw_used;
+	unsigned int block_size;
+	struct xhci_interval_bw_table *bw_table;
+	unsigned int packet_size = 0;
+	unsigned int overhead = 0;
+	unsigned int packets_transmitted = 0;
+	unsigned int packets_remaining = 0;
+	unsigned int i;
+
+	if (virt_dev->udev->speed == USB_SPEED_SUPER)
+		return xhci_check_ss_bw(xhci, virt_dev);
+
+	if (virt_dev->udev->speed == USB_SPEED_HIGH) {
+		max_bandwidth = HS_BW_LIMIT;
+		/* Convert percent of bus BW reserved to blocks reserved */
+		bw_reserved = DIV_ROUND_UP(HS_BW_RESERVED * max_bandwidth, 100);
+	} else {
+		max_bandwidth = FS_BW_LIMIT;
+		bw_reserved = DIV_ROUND_UP(FS_BW_RESERVED * max_bandwidth, 100);
+	}
+
+	bw_table = virt_dev->bw_table;
+	/* We need to translate the max packet size and max ESIT payloads into
+	 * the units the hardware uses.
+	 */
+	block_size = xhci_get_block_size(virt_dev->udev);
+
+	/* If we are manipulating a LS/FS device under a HS hub, double check
+	 * that the HS bus has enough bandwidth if we are activing a new TT.
+	 */
+	if (virt_dev->tt_info) {
+		xhci_dbg(xhci, "Recalculating BW for rootport %u\n",
+				virt_dev->real_port);
+		if (xhci_check_tt_bw_table(xhci, virt_dev, old_active_eps)) {
+			xhci_warn(xhci, "Not enough bandwidth on HS bus for "
+					"newly activated TT.\n");
+			return -ENOMEM;
+		}
+		xhci_dbg(xhci, "Recalculating BW for TT slot %u port %u\n",
+				virt_dev->tt_info->slot_id,
+				virt_dev->tt_info->ttport);
+	} else {
+		xhci_dbg(xhci, "Recalculating BW for rootport %u\n",
+				virt_dev->real_port);
+	}
+
+	/* Add in how much bandwidth will be used for interval zero, or the
+	 * rounded max ESIT payload + number of packets * largest overhead.
+	 */
+	bw_used = DIV_ROUND_UP(bw_table->interval0_esit_payload, block_size) +
+		bw_table->interval_bw[0].num_packets *
+		xhci_get_largest_overhead(&bw_table->interval_bw[0]);
+
+	for (i = 1; i < XHCI_MAX_INTERVAL; i++) {
+		unsigned int bw_added;
+		unsigned int largest_mps;
+		unsigned int interval_overhead;
+
+		/*
+		 * How many packets could we transmit in this interval?
+		 * If packets didn't fit in the previous interval, we will need
+		 * to transmit that many packets twice within this interval.
+		 */
+		packets_remaining = 2 * packets_remaining +
+			bw_table->interval_bw[i].num_packets;
+
+		/* Find the largest max packet size of this or the previous
+		 * interval.
+		 */
+		if (list_empty(&bw_table->interval_bw[i].endpoints))
+			largest_mps = 0;
+		else {
+			struct xhci_virt_ep *virt_ep;
+			struct list_head *ep_entry;
+
+			ep_entry = bw_table->interval_bw[i].endpoints.next;
+			virt_ep = list_entry(ep_entry,
+					struct xhci_virt_ep, bw_endpoint_list);
+			/* Convert to blocks, rounding up */
+			largest_mps = DIV_ROUND_UP(
+					virt_ep->bw_info.max_packet_size,
+					block_size);
+		}
+		if (largest_mps > packet_size)
+			packet_size = largest_mps;
+
+		/* Use the larger overhead of this or the previous interval. */
+		interval_overhead = xhci_get_largest_overhead(
+				&bw_table->interval_bw[i]);
+		if (interval_overhead > overhead)
+			overhead = interval_overhead;
+
+		/* How many packets can we evenly distribute across
+		 * (1 << (i + 1)) possible scheduling opportunities?
+		 */
+		packets_transmitted = packets_remaining >> (i + 1);
+
+		/* Add in the bandwidth used for those scheduled packets */
+		bw_added = packets_transmitted * (overhead + packet_size);
+
+		/* How many packets do we have remaining to transmit? */
+		packets_remaining = packets_remaining % (1 << (i + 1));
+
+		/* What largest max packet size should those packets have? */
+		/* If we've transmitted all packets, don't carry over the
+		 * largest packet size.
+		 */
+		if (packets_remaining == 0) {
+			packet_size = 0;
+			overhead = 0;
+		} else if (packets_transmitted > 0) {
+			/* Otherwise if we do have remaining packets, and we've
+			 * scheduled some packets in this interval, take the
+			 * largest max packet size from endpoints with this
+			 * interval.
+			 */
+			packet_size = largest_mps;
+			overhead = interval_overhead;
+		}
+		/* Otherwise carry over packet_size and overhead from the last
+		 * time we had a remainder.
+		 */
+		bw_used += bw_added;
+		if (bw_used > max_bandwidth) {
+			xhci_warn(xhci, "Not enough bandwidth. "
+					"Proposed: %u, Max: %u\n",
+				bw_used, max_bandwidth);
+			return -ENOMEM;
+		}
+	}
+	/*
+	 * Ok, we know we have some packets left over after even-handedly
+	 * scheduling interval 15.  We don't know which microframes they will
+	 * fit into, so we over-schedule and say they will be scheduled every
+	 * microframe.
+	 */
+	if (packets_remaining > 0)
+		bw_used += overhead + packet_size;
+
+	if (!virt_dev->tt_info && virt_dev->udev->speed == USB_SPEED_HIGH) {
+		unsigned int port_index = virt_dev->real_port - 1;
+
+		/* OK, we're manipulating a HS device attached to a
+		 * root port bandwidth domain.  Include the number of active TTs
+		 * in the bandwidth used.
+		 */
+		bw_used += TT_HS_OVERHEAD *
+			xhci->rh_bw[port_index].num_active_tts;
+	}
+
+	xhci_dbg(xhci, "Final bandwidth: %u, Limit: %u, Reserved: %u, "
+		"Available: %u " "percent\n",
+		bw_used, max_bandwidth, bw_reserved,
+		(max_bandwidth - bw_used - bw_reserved) * 100 /
+		max_bandwidth);
+
+	bw_used += bw_reserved;
+	if (bw_used > max_bandwidth) {
+		xhci_warn(xhci, "Not enough bandwidth. Proposed: %u, Max: %u\n",
+				bw_used, max_bandwidth);
+		return -ENOMEM;
+	}
+
+	bw_table->bw_used = bw_used;
+	return 0;
+}
+
+static bool xhci_is_async_ep(unsigned int ep_type)
+{
+	return (ep_type != ISOC_OUT_EP && ep_type != INT_OUT_EP &&
+					ep_type != ISOC_IN_EP &&
+					ep_type != INT_IN_EP);
+}
+
+static bool xhci_is_sync_in_ep(unsigned int ep_type)
+{
+	return (ep_type == ISOC_IN_EP || ep_type != INT_IN_EP);
+}
+
+static unsigned int xhci_get_ss_bw_consumed(struct xhci_bw_info *ep_bw)
+{
+	unsigned int mps = DIV_ROUND_UP(ep_bw->max_packet_size, SS_BLOCK);
+
+	if (ep_bw->ep_interval == 0)
+		return SS_OVERHEAD_BURST +
+			(ep_bw->mult * ep_bw->num_packets *
+					(SS_OVERHEAD + mps));
+	return DIV_ROUND_UP(ep_bw->mult * ep_bw->num_packets *
+				(SS_OVERHEAD + mps + SS_OVERHEAD_BURST),
+				1 << ep_bw->ep_interval);
+
+}
+
+void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci,
+		struct xhci_bw_info *ep_bw,
+		struct xhci_interval_bw_table *bw_table,
+		struct usb_device *udev,
+		struct xhci_virt_ep *virt_ep,
+		struct xhci_tt_bw_info *tt_info)
+{
+	struct xhci_interval_bw	*interval_bw;
+	int normalized_interval;
+
+	if (xhci_is_async_ep(ep_bw->type))
+		return;
+
+	if (udev->speed == USB_SPEED_SUPER) {
+		if (xhci_is_sync_in_ep(ep_bw->type))
+			xhci->devs[udev->slot_id]->bw_table->ss_bw_in -=
+				xhci_get_ss_bw_consumed(ep_bw);
+		else
+			xhci->devs[udev->slot_id]->bw_table->ss_bw_out -=
+				xhci_get_ss_bw_consumed(ep_bw);
+		return;
+	}
+
+	/* SuperSpeed endpoints never get added to intervals in the table, so
+	 * this check is only valid for HS/FS/LS devices.
+	 */
+	if (list_empty(&virt_ep->bw_endpoint_list))
+		return;
+	/* For LS/FS devices, we need to translate the interval expressed in
+	 * microframes to frames.
+	 */
+	if (udev->speed == USB_SPEED_HIGH)
+		normalized_interval = ep_bw->ep_interval;
+	else
+		normalized_interval = ep_bw->ep_interval - 3;
+
+	if (normalized_interval == 0)
+		bw_table->interval0_esit_payload -= ep_bw->max_esit_payload;
+	interval_bw = &bw_table->interval_bw[normalized_interval];
+	interval_bw->num_packets -= ep_bw->num_packets;
+	switch (udev->speed) {
+	case USB_SPEED_LOW:
+		interval_bw->overhead[LS_OVERHEAD_TYPE] -= 1;
+		break;
+	case USB_SPEED_FULL:
+		interval_bw->overhead[FS_OVERHEAD_TYPE] -= 1;
+		break;
+	case USB_SPEED_HIGH:
+		interval_bw->overhead[HS_OVERHEAD_TYPE] -= 1;
+		break;
+	case USB_SPEED_SUPER:
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_WIRELESS:
+		/* Should never happen because only LS/FS/HS endpoints will get
+		 * added to the endpoint list.
+		 */
+		return;
+	}
+	if (tt_info)
+		tt_info->active_eps -= 1;
+	list_del_init(&virt_ep->bw_endpoint_list);
+}
+
+static void xhci_add_ep_to_interval_table(struct xhci_hcd *xhci,
+		struct xhci_bw_info *ep_bw,
+		struct xhci_interval_bw_table *bw_table,
+		struct usb_device *udev,
+		struct xhci_virt_ep *virt_ep,
+		struct xhci_tt_bw_info *tt_info)
+{
+	struct xhci_interval_bw	*interval_bw;
+	struct xhci_virt_ep *smaller_ep;
+	int normalized_interval;
+
+	if (xhci_is_async_ep(ep_bw->type))
+		return;
+
+	if (udev->speed == USB_SPEED_SUPER) {
+		if (xhci_is_sync_in_ep(ep_bw->type))
+			xhci->devs[udev->slot_id]->bw_table->ss_bw_in +=
+				xhci_get_ss_bw_consumed(ep_bw);
+		else
+			xhci->devs[udev->slot_id]->bw_table->ss_bw_out +=
+				xhci_get_ss_bw_consumed(ep_bw);
+		return;
+	}
+
+	/* For LS/FS devices, we need to translate the interval expressed in
+	 * microframes to frames.
+	 */
+	if (udev->speed == USB_SPEED_HIGH)
+		normalized_interval = ep_bw->ep_interval;
+	else
+		normalized_interval = ep_bw->ep_interval - 3;
+
+	if (normalized_interval == 0)
+		bw_table->interval0_esit_payload += ep_bw->max_esit_payload;
+	interval_bw = &bw_table->interval_bw[normalized_interval];
+	interval_bw->num_packets += ep_bw->num_packets;
+	switch (udev->speed) {
+	case USB_SPEED_LOW:
+		interval_bw->overhead[LS_OVERHEAD_TYPE] += 1;
+		break;
+	case USB_SPEED_FULL:
+		interval_bw->overhead[FS_OVERHEAD_TYPE] += 1;
+		break;
+	case USB_SPEED_HIGH:
+		interval_bw->overhead[HS_OVERHEAD_TYPE] += 1;
+		break;
+	case USB_SPEED_SUPER:
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_WIRELESS:
+		/* Should never happen because only LS/FS/HS endpoints will get
+		 * added to the endpoint list.
+		 */
+		return;
+	}
+
+	if (tt_info)
+		tt_info->active_eps += 1;
+	/* Insert the endpoint into the list, largest max packet size first. */
+	list_for_each_entry(smaller_ep, &interval_bw->endpoints,
+			bw_endpoint_list) {
+		if (ep_bw->max_packet_size >=
+				smaller_ep->bw_info.max_packet_size) {
+			/* Add the new ep before the smaller endpoint */
+			list_add_tail(&virt_ep->bw_endpoint_list,
+					&smaller_ep->bw_endpoint_list);
+			return;
+		}
+	}
+	/* Add the new endpoint at the end of the list. */
+	list_add_tail(&virt_ep->bw_endpoint_list,
+			&interval_bw->endpoints);
+}
+
+void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int old_active_eps)
+{
+	struct xhci_root_port_bw_info *rh_bw_info;
+	if (!virt_dev->tt_info)
+		return;
+
+	rh_bw_info = &xhci->rh_bw[virt_dev->real_port - 1];
+	if (old_active_eps == 0 &&
+				virt_dev->tt_info->active_eps != 0) {
+		rh_bw_info->num_active_tts += 1;
+		rh_bw_info->bw_table.bw_used += TT_HS_OVERHEAD;
+	} else if (old_active_eps != 0 &&
+				virt_dev->tt_info->active_eps == 0) {
+		rh_bw_info->num_active_tts -= 1;
+		rh_bw_info->bw_table.bw_used -= TT_HS_OVERHEAD;
+	}
+}
+
+static int xhci_reserve_bandwidth(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		struct xhci_container_ctx *in_ctx)
+{
+	struct xhci_bw_info ep_bw_info[31];
+	int i;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	int old_active_eps = 0;
+
+	if (virt_dev->tt_info)
+		old_active_eps = virt_dev->tt_info->active_eps;
+
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+
+	for (i = 0; i < 31; i++) {
+		if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i))
+			continue;
+
+		/* Make a copy of the BW info in case we need to revert this */
+		memcpy(&ep_bw_info[i], &virt_dev->eps[i].bw_info,
+				sizeof(ep_bw_info[i]));
+		/* Drop the endpoint from the interval table if the endpoint is
+		 * being dropped or changed.
+		 */
+		if (EP_IS_DROPPED(ctrl_ctx, i))
+			xhci_drop_ep_from_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					virt_dev->udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+	}
+	/* Overwrite the information stored in the endpoints' bw_info */
+	xhci_update_bw_info(xhci, virt_dev->in_ctx, ctrl_ctx, virt_dev);
+	for (i = 0; i < 31; i++) {
+		/* Add any changed or added endpoints to the interval table */
+		if (EP_IS_ADDED(ctrl_ctx, i))
+			xhci_add_ep_to_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					virt_dev->udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+	}
+
+	if (!xhci_check_bw_table(xhci, virt_dev, old_active_eps)) {
+		/* Ok, this fits in the bandwidth we have.
+		 * Update the number of active TTs.
+		 */
+		xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps);
+		return 0;
+	}
+
+	/* We don't have enough bandwidth for this, revert the stored info. */
+	for (i = 0; i < 31; i++) {
+		if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i))
+			continue;
+
+		/* Drop the new copies of any added or changed endpoints from
+		 * the interval table.
+		 */
+		if (EP_IS_ADDED(ctrl_ctx, i)) {
+			xhci_drop_ep_from_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					virt_dev->udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+		}
+		/* Revert the endpoint back to its old information */
+		memcpy(&virt_dev->eps[i].bw_info, &ep_bw_info[i],
+				sizeof(ep_bw_info[i]));
+		/* Add any changed or dropped endpoints back into the table */
+		if (EP_IS_DROPPED(ctrl_ctx, i))
+			xhci_add_ep_to_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					virt_dev->udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+	}
+	return -ENOMEM;
+}
+
+
 /* Issue a configure endpoint command or evaluate context command
  * and wait for it to finish.
  */
@@ -1765,17 +2375,30 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 
 	spin_lock_irqsave(&xhci->lock, flags);
 	virt_dev = xhci->devs[udev->slot_id];
-	if (command) {
+
+	if (command)
 		in_ctx = command->in_ctx;
-		if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
-				xhci_reserve_host_resources(xhci, in_ctx)) {
-			spin_unlock_irqrestore(&xhci->lock, flags);
-			xhci_warn(xhci, "Not enough host resources, "
-					"active endpoint contexts = %u\n",
-					xhci->num_active_eps);
-			return -ENOMEM;
-		}
+	else
+		in_ctx = virt_dev->in_ctx;
+
+	if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
+			xhci_reserve_host_resources(xhci, in_ctx)) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_warn(xhci, "Not enough host resources, "
+				"active endpoint contexts = %u\n",
+				xhci->num_active_eps);
+		return -ENOMEM;
+	}
+	if ((xhci->quirks & XHCI_SW_BW_CHECKING) &&
+			xhci_reserve_bandwidth(xhci, virt_dev, in_ctx)) {
+		if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
+			xhci_free_host_resources(xhci, in_ctx);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_warn(xhci, "Not enough bandwidth\n");
+		return -ENOMEM;
+	}
 
+	if (command) {
 		cmd_completion = command->completion;
 		cmd_status = &command->status;
 		command->command_trb = xhci->cmd_ring->enqueue;
@@ -1789,15 +2412,6 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 
 		list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
 	} else {
-		in_ctx = virt_dev->in_ctx;
-		if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
-				xhci_reserve_host_resources(xhci, in_ctx)) {
-			spin_unlock_irqrestore(&xhci->lock, flags);
-			xhci_warn(xhci, "Not enough host resources, "
-					"active endpoint contexts = %u\n",
-					xhci->num_active_eps);
-			return -ENOMEM;
-		}
 		cmd_completion = &virt_dev->cmd_completion;
 		cmd_status = &virt_dev->cmd_status;
 	}
@@ -1888,6 +2502,12 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
 	ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG);
 	ctrl_ctx->drop_flags &= cpu_to_le32(~(SLOT_FLAG | EP0_FLAG));
+
+	/* Don't issue the command if there's no endpoints to update. */
+	if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) &&
+			ctrl_ctx->drop_flags == 0)
+		return 0;
+
 	xhci_dbg(xhci, "New Input Control Context:\n");
 	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
 	xhci_dbg_ctx(xhci, virt_dev->in_ctx,
@@ -2525,6 +3145,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 	int timeleft;
 	int last_freed_endpoint;
 	struct xhci_slot_ctx *slot_ctx;
+	int old_active_eps = 0;
 
 	ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__);
 	if (ret <= 0)
@@ -2666,7 +3287,18 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 			xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
 			last_freed_endpoint = i;
 		}
-	}
+		if (!list_empty(&virt_dev->eps[i].bw_endpoint_list))
+			xhci_drop_ep_from_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+		xhci_clear_endpoint_bw_info(&virt_dev->eps[i].bw_info);
+	}
+	/* If necessary, update the number of active TTs on this root port */
+	xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps);
+
 	xhci_dbg(xhci, "Output context after successful reset device cmd:\n");
 	xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint);
 	ret = 0;
@@ -2704,6 +3336,11 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
 		del_timer_sync(&virt_dev->eps[i].stop_cmd_timer);
 	}
 
+	if (udev->usb2_hw_lpm_enabled) {
+		xhci_set_usb2_hardware_lpm(hcd, udev, 0);
+		udev->usb2_hw_lpm_enabled = 0;
+	}
+
 	spin_lock_irqsave(&xhci->lock, flags);
 	/* Don't disable the slot if the host controller is dead. */
 	state = xhci_readl(xhci, &xhci->op_regs->status);
@@ -2889,7 +3526,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	 * command on a timeout.
 	 */
 	if (timeleft <= 0) {
-		xhci_warn(xhci, "%s while waiting for a slot\n",
+		xhci_warn(xhci, "%s while waiting for address device command\n",
 				timeleft == 0 ? "Timeout" : "Signal");
 		/* FIXME cancel the address device command */
 		return -ETIME;
@@ -2957,6 +3594,254 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	return 0;
 }
 
+#ifdef CONFIG_USB_SUSPEND
+
+/* BESL to HIRD Encoding array for USB2 LPM */
+static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000,
+	3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000};
+
+/* Calculate HIRD/BESL for USB2 PORTPMSC*/
+static int xhci_calculate_hird_besl(int u2del, bool use_besl)
+{
+	int hird;
+
+	if (use_besl) {
+		for (hird = 0; hird < 16; hird++) {
+			if (xhci_besl_encoding[hird] >= u2del)
+				break;
+		}
+	} else {
+		if (u2del <= 50)
+			hird = 0;
+		else
+			hird = (u2del - 51) / 75 + 1;
+
+		if (hird > 15)
+			hird = 15;
+	}
+
+	return hird;
+}
+
+static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
+					struct usb_device *udev)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct dev_info	*dev_info;
+	__le32 __iomem	**port_array;
+	__le32 __iomem	*addr, *pm_addr;
+	u32		temp, dev_id;
+	unsigned int	port_num;
+	unsigned long	flags;
+	int		u2del, hird;
+	int		ret;
+
+	if (hcd->speed == HCD_USB3 || !xhci->sw_lpm_support ||
+			!udev->lpm_capable)
+		return -EINVAL;
+
+	/* we only support lpm for non-hub device connected to root hub yet */
+	if (!udev->parent || udev->parent->parent ||
+			udev->descriptor.bDeviceClass == USB_CLASS_HUB)
+		return -EINVAL;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	/* Look for devices in lpm_failed_devs list */
+	dev_id = le16_to_cpu(udev->descriptor.idVendor) << 16 |
+			le16_to_cpu(udev->descriptor.idProduct);
+	list_for_each_entry(dev_info, &xhci->lpm_failed_devs, list) {
+		if (dev_info->dev_id == dev_id) {
+			ret = -EINVAL;
+			goto finish;
+		}
+	}
+
+	port_array = xhci->usb2_ports;
+	port_num = udev->portnum - 1;
+
+	if (port_num > HCS_MAX_PORTS(xhci->hcs_params1)) {
+		xhci_dbg(xhci, "invalid port number %d\n", udev->portnum);
+		ret = -EINVAL;
+		goto finish;
+	}
+
+	/*
+	 * Test USB 2.0 software LPM.
+	 * FIXME: some xHCI 1.0 hosts may implement a new register to set up
+	 * hardware-controlled USB 2.0 LPM. See section 5.4.11 and 4.23.5.1.1.1
+	 * in the June 2011 errata release.
+	 */
+	xhci_dbg(xhci, "test port %d software LPM\n", port_num);
+	/*
+	 * Set L1 Device Slot and HIRD/BESL.
+	 * Check device's USB 2.0 extension descriptor to determine whether
+	 * HIRD or BESL shoule be used. See USB2.0 LPM errata.
+	 */
+	pm_addr = port_array[port_num] + 1;
+	u2del = HCS_U2_LATENCY(xhci->hcs_params3);
+	if (le32_to_cpu(udev->bos->ext_cap->bmAttributes) & (1 << 2))
+		hird = xhci_calculate_hird_besl(u2del, 1);
+	else
+		hird = xhci_calculate_hird_besl(u2del, 0);
+
+	temp = PORT_L1DS(udev->slot_id) | PORT_HIRD(hird);
+	xhci_writel(xhci, temp, pm_addr);
+
+	/* Set port link state to U2(L1) */
+	addr = port_array[port_num];
+	xhci_set_link_state(xhci, port_array, port_num, XDEV_U2);
+
+	/* wait for ACK */
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	msleep(10);
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	/* Check L1 Status */
+	ret = handshake(xhci, pm_addr, PORT_L1S_MASK, PORT_L1S_SUCCESS, 125);
+	if (ret != -ETIMEDOUT) {
+		/* enter L1 successfully */
+		temp = xhci_readl(xhci, addr);
+		xhci_dbg(xhci, "port %d entered L1 state, port status 0x%x\n",
+				port_num, temp);
+		ret = 0;
+	} else {
+		temp = xhci_readl(xhci, pm_addr);
+		xhci_dbg(xhci, "port %d software lpm failed, L1 status %d\n",
+				port_num, temp & PORT_L1S_MASK);
+		ret = -EINVAL;
+	}
+
+	/* Resume the port */
+	xhci_set_link_state(xhci, port_array, port_num, XDEV_U0);
+
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	msleep(10);
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	/* Clear PLC */
+	xhci_test_and_clear_bit(xhci, port_array, port_num, PORT_PLC);
+
+	/* Check PORTSC to make sure the device is in the right state */
+	if (!ret) {
+		temp = xhci_readl(xhci, addr);
+		xhci_dbg(xhci, "resumed port %d status 0x%x\n",	port_num, temp);
+		if (!(temp & PORT_CONNECT) || !(temp & PORT_PE) ||
+				(temp & PORT_PLS_MASK) != XDEV_U0) {
+			xhci_dbg(xhci, "port L1 resume fail\n");
+			ret = -EINVAL;
+		}
+	}
+
+	if (ret) {
+		/* Insert dev to lpm_failed_devs list */
+		xhci_warn(xhci, "device LPM test failed, may disconnect and "
+				"re-enumerate\n");
+		dev_info = kzalloc(sizeof(struct dev_info), GFP_ATOMIC);
+		if (!dev_info) {
+			ret = -ENOMEM;
+			goto finish;
+		}
+		dev_info->dev_id = dev_id;
+		INIT_LIST_HEAD(&dev_info->list);
+		list_add(&dev_info->list, &xhci->lpm_failed_devs);
+	} else {
+		xhci_ring_device(xhci, udev->slot_id);
+	}
+
+finish:
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return ret;
+}
+
+int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
+			struct usb_device *udev, int enable)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	__le32 __iomem	**port_array;
+	__le32 __iomem	*pm_addr;
+	u32		temp;
+	unsigned int	port_num;
+	unsigned long	flags;
+	int		u2del, hird;
+
+	if (hcd->speed == HCD_USB3 || !xhci->hw_lpm_support ||
+			!udev->lpm_capable)
+		return -EPERM;
+
+	if (!udev->parent || udev->parent->parent ||
+			udev->descriptor.bDeviceClass == USB_CLASS_HUB)
+		return -EPERM;
+
+	if (udev->usb2_hw_lpm_capable != 1)
+		return -EPERM;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	port_array = xhci->usb2_ports;
+	port_num = udev->portnum - 1;
+	pm_addr = port_array[port_num] + 1;
+	temp = xhci_readl(xhci, pm_addr);
+
+	xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
+			enable ? "enable" : "disable", port_num);
+
+	u2del = HCS_U2_LATENCY(xhci->hcs_params3);
+	if (le32_to_cpu(udev->bos->ext_cap->bmAttributes) & (1 << 2))
+		hird = xhci_calculate_hird_besl(u2del, 1);
+	else
+		hird = xhci_calculate_hird_besl(u2del, 0);
+
+	if (enable) {
+		temp &= ~PORT_HIRD_MASK;
+		temp |= PORT_HIRD(hird) | PORT_RWE;
+		xhci_writel(xhci, temp, pm_addr);
+		temp = xhci_readl(xhci, pm_addr);
+		temp |= PORT_HLE;
+		xhci_writel(xhci, temp, pm_addr);
+	} else {
+		temp &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK);
+		xhci_writel(xhci, temp, pm_addr);
+	}
+
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return 0;
+}
+
+int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int		ret;
+
+	ret = xhci_usb2_software_lpm_test(hcd, udev);
+	if (!ret) {
+		xhci_dbg(xhci, "software LPM test succeed\n");
+		if (xhci->hw_lpm_support == 1) {
+			udev->usb2_hw_lpm_capable = 1;
+			ret = xhci_set_usb2_hardware_lpm(hcd, udev, 1);
+			if (!ret)
+				udev->usb2_hw_lpm_enabled = 1;
+		}
+	}
+
+	return 0;
+}
+
+#else
+
+int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
+				struct usb_device *udev, int enable)
+{
+	return 0;
+}
+
+int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	return 0;
+}
+
+#endif /* CONFIG_USB_SUSPEND */
+
 /* Once a hub descriptor is fetched for a device, we need to update the xHC's
  * internal data structures for the device.
  */
@@ -2988,6 +3873,14 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
 	}
 
 	spin_lock_irqsave(&xhci->lock, flags);
+	if (hdev->speed == USB_SPEED_HIGH &&
+			xhci_alloc_tt_info(xhci, vdev, hdev, tt, GFP_ATOMIC)) {
+		xhci_dbg(xhci, "Could not allocate xHCI TT structure.\n");
+		xhci_free_command(xhci, config_cmd);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return -ENOMEM;
+	}
+
 	xhci_slot_copy(xhci, config_cmd->in_ctx, vdev->out_ctx);
 	ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx);
 	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
@@ -3051,22 +3944,108 @@ int xhci_get_frame(struct usb_hcd *hcd)
 	return xhci_readl(xhci, &xhci->run_regs->microframe_index) >> 3;
 }
 
+int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
+{
+	struct xhci_hcd		*xhci;
+	struct device		*dev = hcd->self.controller;
+	int			retval;
+	u32			temp;
+
+	hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2;
+
+	if (usb_hcd_is_primary_hcd(hcd)) {
+		xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
+		if (!xhci)
+			return -ENOMEM;
+		*((struct xhci_hcd **) hcd->hcd_priv) = xhci;
+		xhci->main_hcd = hcd;
+		/* Mark the first roothub as being USB 2.0.
+		 * The xHCI driver will register the USB 3.0 roothub.
+		 */
+		hcd->speed = HCD_USB2;
+		hcd->self.root_hub->speed = USB_SPEED_HIGH;
+		/*
+		 * USB 2.0 roothub under xHCI has an integrated TT,
+		 * (rate matching hub) as opposed to having an OHCI/UHCI
+		 * companion controller.
+		 */
+		hcd->has_tt = 1;
+	} else {
+		/* xHCI private pointer was set in xhci_pci_probe for the second
+		 * registered roothub.
+		 */
+		xhci = hcd_to_xhci(hcd);
+		temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+		if (HCC_64BIT_ADDR(temp)) {
+			xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
+			dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
+		} else {
+			dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
+		}
+		return 0;
+	}
+
+	xhci->cap_regs = hcd->regs;
+	xhci->op_regs = hcd->regs +
+		HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
+	xhci->run_regs = hcd->regs +
+		(xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
+	/* Cache read-only capability registers */
+	xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
+	xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
+	xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
+	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+	xhci->hci_version = HC_VERSION(xhci->hcc_params);
+	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+	xhci_print_registers(xhci);
+
+	get_quirks(dev, xhci);
+
+	/* Make sure the HC is halted. */
+	retval = xhci_halt(xhci);
+	if (retval)
+		goto error;
+
+	xhci_dbg(xhci, "Resetting HCD\n");
+	/* Reset the internal HC memory state and registers. */
+	retval = xhci_reset(xhci);
+	if (retval)
+		goto error;
+	xhci_dbg(xhci, "Reset complete\n");
+
+	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+	if (HCC_64BIT_ADDR(temp)) {
+		xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
+		dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
+	} else {
+		dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
+	}
+
+	xhci_dbg(xhci, "Calling HCD init\n");
+	/* Initialize HCD and host controller data structures. */
+	retval = xhci_init(hcd);
+	if (retval)
+		goto error;
+	xhci_dbg(xhci, "Called HCD init\n");
+	return 0;
+error:
+	kfree(xhci);
+	return retval;
+}
+
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_LICENSE("GPL");
 
 static int __init xhci_hcd_init(void)
 {
-#ifdef CONFIG_PCI
-	int retval = 0;
+	int retval;
 
 	retval = xhci_register_pci();
-
 	if (retval < 0) {
 		printk(KERN_DEBUG "Problem registering PCI driver.");
 		return retval;
 	}
-#endif
 	/*
 	 * Check the compiler generated sizes of structures that must be laid
 	 * out in specific ways for hardware access.
@@ -3091,8 +4070,6 @@ module_init(xhci_hcd_init);
 
 static void __exit xhci_hcd_cleanup(void)
 {
-#ifdef CONFIG_PCI
 	xhci_unregister_pci();
-#endif
 }
 module_exit(xhci_hcd_cleanup);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index cae8e23308bf..3c8fbd2772ea 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -272,6 +272,7 @@ struct xhci_op_regs {
  */
 #define PORT_PLS_MASK	(0xf << 5)
 #define XDEV_U0		(0x0 << 5)
+#define XDEV_U2		(0x2 << 5)
 #define XDEV_U3		(0x3 << 5)
 #define XDEV_RESUME	(0xf << 5)
 /* true: port has power (see HCC_PPC) */
@@ -362,7 +363,13 @@ struct xhci_op_regs {
 /* Bits 24:31 for port testing */
 
 /* USB2 Protocol PORTSPMSC */
-#define PORT_RWE	(1 << 0x3)
+#define	PORT_L1S_MASK		7
+#define	PORT_L1S_SUCCESS	1
+#define	PORT_RWE		(1 << 3)
+#define	PORT_HIRD(p)		(((p) & 0xf) << 4)
+#define	PORT_HIRD_MASK		(0xf << 4)
+#define	PORT_L1DS(p)		(((p) & 0xff) << 8)
+#define	PORT_HLE		(1 << 16)
 
 /**
  * struct xhci_intr_reg - Interrupt Register Set
@@ -611,11 +618,13 @@ struct xhci_ep_ctx {
 #define EP_STATE_ERROR		4
 /* Mult - Max number of burtst within an interval, in EP companion desc. */
 #define EP_MULT(p)		(((p) & 0x3) << 8)
+#define CTX_TO_EP_MULT(p)	(((p) >> 8) & 0x3)
 /* bits 10:14 are Max Primary Streams */
 /* bit 15 is Linear Stream Array */
 /* Interval - period between requests to an endpoint - 125u increments. */
 #define EP_INTERVAL(p)		(((p) & 0xff) << 16)
 #define EP_INTERVAL_TO_UFRAMES(p)		(1 << (((p) >> 16) & 0xff))
+#define CTX_TO_EP_INTERVAL(p)	(((p) >> 16) & 0xff)
 #define EP_MAXPSTREAMS_MASK	(0x1f << 10)
 #define EP_MAXPSTREAMS(p)	(((p) << 10) & EP_MAXPSTREAMS_MASK)
 /* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
@@ -640,6 +649,7 @@ struct xhci_ep_ctx {
 /* bit 6 reserved */
 /* bit 7 is Host Initiate Disable - for disabling stream selection */
 #define MAX_BURST(p)	(((p)&0xff) << 8)
+#define CTX_TO_MAX_BURST(p)	(((p) >> 8) & 0xff)
 #define MAX_PACKET(p)	(((p)&0xffff) << 16)
 #define MAX_PACKET_MASK		(0xffff << 16)
 #define MAX_PACKET_DECODED(p)	(((p) >> 16) & 0xffff)
@@ -652,6 +662,7 @@ struct xhci_ep_ctx {
 /* tx_info bitmasks */
 #define AVG_TRB_LENGTH_FOR_EP(p)	((p) & 0xffff)
 #define MAX_ESIT_PAYLOAD_FOR_EP(p)	(((p) & 0xffff) << 16)
+#define CTX_TO_MAX_ESIT_PAYLOAD(p)	(((p) >> 16) & 0xffff)
 
 /* deq bitmasks */
 #define EP_CTX_CYCLE_MASK		(1 << 0)
@@ -670,6 +681,11 @@ struct xhci_input_control_ctx {
 	__le32	rsvd2[6];
 };
 
+#define	EP_IS_ADDED(ctrl_ctx, i) \
+	(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))
+#define	EP_IS_DROPPED(ctrl_ctx, i)       \
+	(le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1)))
+
 /* Represents everything that is needed to issue a command on the command ring.
  * It's useful to pre-allocate these for commands that cannot fail due to
  * out-of-memory errors, like freeing streams.
@@ -731,6 +747,67 @@ struct xhci_stream_info {
 #define	SMALL_STREAM_ARRAY_SIZE		256
 #define	MEDIUM_STREAM_ARRAY_SIZE	1024
 
+/* Some Intel xHCI host controllers need software to keep track of the bus
+ * bandwidth.  Keep track of endpoint info here.  Each root port is allocated
+ * the full bus bandwidth.  We must also treat TTs (including each port under a
+ * multi-TT hub) as a separate bandwidth domain.  The direct memory interface
+ * (DMI) also limits the total bandwidth (across all domains) that can be used.
+ */
+struct xhci_bw_info {
+	/* ep_interval is zero-based */
+	unsigned int		ep_interval;
+	/* mult and num_packets are one-based */
+	unsigned int		mult;
+	unsigned int		num_packets;
+	unsigned int		max_packet_size;
+	unsigned int		max_esit_payload;
+	unsigned int		type;
+};
+
+/* "Block" sizes in bytes the hardware uses for different device speeds.
+ * The logic in this part of the hardware limits the number of bits the hardware
+ * can use, so must represent bandwidth in a less precise manner to mimic what
+ * the scheduler hardware computes.
+ */
+#define	FS_BLOCK	1
+#define	HS_BLOCK	4
+#define	SS_BLOCK	16
+#define	DMI_BLOCK	32
+
+/* Each device speed has a protocol overhead (CRC, bit stuffing, etc) associated
+ * with each byte transferred.  SuperSpeed devices have an initial overhead to
+ * set up bursts.  These are in blocks, see above.  LS overhead has already been
+ * translated into FS blocks.
+ */
+#define DMI_OVERHEAD 8
+#define DMI_OVERHEAD_BURST 4
+#define SS_OVERHEAD 8
+#define SS_OVERHEAD_BURST 32
+#define HS_OVERHEAD 26
+#define FS_OVERHEAD 20
+#define LS_OVERHEAD 128
+/* The TTs need to claim roughly twice as much bandwidth (94 bytes per
+ * microframe ~= 24Mbps) of the HS bus as the devices can actually use because
+ * of overhead associated with split transfers crossing microframe boundaries.
+ * 31 blocks is pure protocol overhead.
+ */
+#define TT_HS_OVERHEAD (31 + 94)
+#define TT_DMI_OVERHEAD (25 + 12)
+
+/* Bandwidth limits in blocks */
+#define FS_BW_LIMIT		1285
+#define TT_BW_LIMIT		1320
+#define HS_BW_LIMIT		1607
+#define SS_BW_LIMIT_IN		3906
+#define DMI_BW_LIMIT_IN		3906
+#define SS_BW_LIMIT_OUT		3906
+#define DMI_BW_LIMIT_OUT	3906
+
+/* Percentage of bus bandwidth reserved for non-periodic transfers */
+#define FS_BW_RESERVED		10
+#define HS_BW_RESERVED		20
+#define SS_BW_RESERVED		10
+
 struct xhci_virt_ep {
 	struct xhci_ring		*ring;
 	/* Related to endpoints that are configured to use stream IDs only */
@@ -772,8 +849,39 @@ struct xhci_virt_ep {
 	 * process the missed tds on the endpoint ring.
 	 */
 	bool			skip;
+	/* Bandwidth checking storage */
+	struct xhci_bw_info	bw_info;
+	struct list_head	bw_endpoint_list;
+};
+
+enum xhci_overhead_type {
+	LS_OVERHEAD_TYPE = 0,
+	FS_OVERHEAD_TYPE,
+	HS_OVERHEAD_TYPE,
+};
+
+struct xhci_interval_bw {
+	unsigned int		num_packets;
+	/* Sorted by max packet size.
+	 * Head of the list is the greatest max packet size.
+	 */
+	struct list_head	endpoints;
+	/* How many endpoints of each speed are present. */
+	unsigned int		overhead[3];
+};
+
+#define	XHCI_MAX_INTERVAL	16
+
+struct xhci_interval_bw_table {
+	unsigned int		interval0_esit_payload;
+	struct xhci_interval_bw	interval_bw[XHCI_MAX_INTERVAL];
+	/* Includes reserved bandwidth for async endpoints */
+	unsigned int		bw_used;
+	unsigned int		ss_bw_in;
+	unsigned int		ss_bw_out;
 };
 
+
 struct xhci_virt_device {
 	struct usb_device		*udev;
 	/*
@@ -798,7 +906,32 @@ struct xhci_virt_device {
 	/* Status of the last command issued for this device */
 	u32				cmd_status;
 	struct list_head		cmd_list;
-	u8				port;
+	u8				fake_port;
+	u8				real_port;
+	struct xhci_interval_bw_table	*bw_table;
+	struct xhci_tt_bw_info		*tt_info;
+};
+
+/*
+ * For each roothub, keep track of the bandwidth information for each periodic
+ * interval.
+ *
+ * If a high speed hub is attached to the roothub, each TT associated with that
+ * hub is a separate bandwidth domain.  The interval information for the
+ * endpoints on the devices under that TT will appear in the TT structure.
+ */
+struct xhci_root_port_bw_info {
+	struct list_head		tts;
+	unsigned int			num_active_tts;
+	struct xhci_interval_bw_table	bw_table;
+};
+
+struct xhci_tt_bw_info {
+	struct list_head		tt_list;
+	int				slot_id;
+	int				ttport;
+	struct xhci_interval_bw_table	bw_table;
+	int				active_eps;
 };
 
 
@@ -1198,6 +1331,12 @@ struct s3_save {
 	u64	erst_dequeue;
 };
 
+/* Use for lpm */
+struct dev_info {
+	u32			dev_id;
+	struct	list_head	list;
+};
+
 struct xhci_bus_state {
 	unsigned long		bus_suspended;
 	unsigned long		next_statechange;
@@ -1261,12 +1400,16 @@ struct xhci_hcd {
 	struct xhci_erst	erst;
 	/* Scratchpad */
 	struct xhci_scratchpad  *scratchpad;
+	/* Store LPM test failed devices' information */
+	struct list_head	lpm_failed_devs;
 
 	/* slot enabling and address device helpers */
 	struct completion	addr_dev;
 	int slot_id;
 	/* Internal mirror of the HW's dcbaa */
 	struct xhci_virt_device	*devs[MAX_HC_SLOTS];
+	/* For keeping track of bandwidth domains per roothub. */
+	struct xhci_root_port_bw_info	*rh_bw;
 
 	/* DMA pools */
 	struct dma_pool	*device_pool;
@@ -1318,6 +1461,8 @@ struct xhci_hcd {
 #define XHCI_EP_LIMIT_QUIRK	(1 << 5)
 #define XHCI_BROKEN_MSI		(1 << 6)
 #define XHCI_RESET_ON_RESUME	(1 << 7)
+#define	XHCI_SW_BW_CHECKING	(1 << 8)
+#define XHCI_AMD_0x96_HOST	(1 << 9)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */
@@ -1330,6 +1475,10 @@ struct xhci_hcd {
 	/* Array of pointers to USB 2.0 PORTSC registers */
 	__le32 __iomem		**usb2_ports;
 	unsigned int		num_usb2_ports;
+	/* support xHCI 0.96 spec USB2 software LPM */
+	unsigned		sw_lpm_support:1;
+	/* support xHCI 1.0 spec USB2 hardware LPM */
+	unsigned		hw_lpm_support:1;
 };
 
 /* convert between an HCD pointer and the corresponding EHCI_HCD */
@@ -1401,9 +1550,7 @@ static inline void xhci_write_64(struct xhci_hcd *xhci,
 
 static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
 {
-	u32 temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
-	return ((HC_VERSION(temp) == 0x95) &&
-			(xhci->quirks & XHCI_LINK_TRB_QUIRK));
+	return xhci->quirks & XHCI_LINK_TRB_QUIRK;
 }
 
 /* xHCI debugging */
@@ -1438,6 +1585,20 @@ unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
 unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
 unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
 void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
+void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci,
+		struct xhci_bw_info *ep_bw,
+		struct xhci_interval_bw_table *bw_table,
+		struct usb_device *udev,
+		struct xhci_virt_ep *virt_ep,
+		struct xhci_tt_bw_info *tt_info);
+void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int old_active_eps);
+void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info);
+void xhci_update_bw_info(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_input_control_ctx *ctrl_ctx,
+		struct xhci_virt_device *virt_dev);
 void xhci_endpoint_copy(struct xhci_hcd *xhci,
 		struct xhci_container_ctx *in_ctx,
 		struct xhci_container_ctx *out_ctx,
@@ -1483,9 +1644,13 @@ void xhci_free_command(struct xhci_hcd *xhci,
 /* xHCI PCI glue */
 int xhci_register_pci(void);
 void xhci_unregister_pci(void);
+#else
+static inline int xhci_register_pci(void) { return 0; }
+static inline void xhci_unregister_pci(void) {}
 #endif
 
 /* xHCI host controller glue */
+typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
 void xhci_quiesce(struct xhci_hcd *xhci);
 int xhci_halt(struct xhci_hcd *xhci);
 int xhci_reset(struct xhci_hcd *xhci);
@@ -1493,6 +1658,7 @@ int xhci_init(struct usb_hcd *hcd);
 int xhci_run(struct usb_hcd *hcd);
 void xhci_stop(struct usb_hcd *hcd);
 void xhci_shutdown(struct usb_hcd *hcd);
+int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
 
 #ifdef	CONFIG_PM
 int xhci_suspend(struct xhci_hcd *xhci);
@@ -1507,6 +1673,10 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd);
 irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd);
 int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
 void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_alloc_tt_info(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		struct usb_device *hdev,
+		struct usb_tt *tt, gfp_t mem_flags);
 int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
 		struct usb_host_endpoint **eps, unsigned int num_eps,
 		unsigned int num_streams, gfp_t mem_flags);
@@ -1514,6 +1684,9 @@ int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
 		struct usb_host_endpoint **eps, unsigned int num_eps,
 		gfp_t mem_flags);
 int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
+				struct usb_device *udev, int enable);
 int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
 			struct usb_tt *tt, gfp_t mem_flags);
 int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
@@ -1572,6 +1745,10 @@ void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
 		unsigned int ep_index, unsigned int stream_id);
 
 /* xHCI roothub code */
+void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
+				int port_id, u32 link_state);
+void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
+				int port_id, u32 port_bit);
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
 		char *buf, u16 wLength);
 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);