Merge 6.4-rc4 into usb-next

We need the USB fixes in here and this resolves merge conflicts in:
	drivers/usb/dwc3/gadget.c
	drivers/usb/gadget/udc/core.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 files changed, 45 insertions, 8 deletions

diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c
index 5df4a1832b09..5edf6a08cf82 100644
--- a/drivers/usb/host/uhci-pci.c
+++ b/drivers/usb/host/uhci-pci.c
@@ -119,11 +119,13 @@ static int uhci_pci_init(struct usb_hcd *hcd)
 
 	uhci->rh_numports = uhci_count_ports(hcd);
 
-	/* Intel controllers report the OverCurrent bit active on.
-	 * VIA controllers report it active off, so we'll adjust the
-	 * bit value.  (It's not standardized in the UHCI spec.)
+	/*
+	 * Intel controllers report the OverCurrent bit active on.  VIA
+	 * and ZHAOXIN controllers report it active off, so we'll adjust
+	 * the bit value.  (It's not standardized in the UHCI spec.)
 	 */
-	if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA)
+	if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA ||
+			to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_ZHAOXIN)
 		uhci->oc_low = 1;
 
 	/* HP's server management chip requires a longer port reset delay. */
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index e834c77e188e..69a5cb7eba38 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/acpi.h>
 #include <linux/reset.h>
+#include <linux/suspend.h>
 
 #include "xhci.h"
 #include "xhci-trace.h"
@@ -387,7 +388,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 
 	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
 		pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI)
-		xhci->quirks |= XHCI_BROKEN_D3COLD;
+		xhci->quirks |= XHCI_BROKEN_D3COLD_S2I;
 
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
 		xhci->quirks |= XHCI_LPM_SUPPORT;
@@ -801,9 +802,16 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	 * Systems with the TI redriver that loses port status change events
 	 * need to have the registers polled during D3, so avoid D3cold.
 	 */
-	if (xhci->quirks & (XHCI_COMP_MODE_QUIRK | XHCI_BROKEN_D3COLD))
+	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
 		pci_d3cold_disable(pdev);
 
+#ifdef CONFIG_SUSPEND
+	/* d3cold is broken, but only when s2idle is used */
+	if (pm_suspend_target_state == PM_SUSPEND_TO_IDLE &&
+	    xhci->quirks & (XHCI_BROKEN_D3COLD_S2I))
+		pci_d3cold_disable(pdev);
+#endif
+
 	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
 		xhci_pme_quirk(hcd);
 
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 1ad12d5a4857..2bc82b3a2f98 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -276,6 +276,26 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
 	trace_xhci_inc_enq(ring);
 }
 
+static int xhci_num_trbs_to(struct xhci_segment *start_seg, union xhci_trb *start,
+			    struct xhci_segment *end_seg, union xhci_trb *end,
+			    unsigned int num_segs)
+{
+	union xhci_trb *last_on_seg;
+	int num = 0;
+	int i = 0;
+
+	do {
+		if (start_seg == end_seg && end >= start)
+			return num + (end - start);
+		last_on_seg = &start_seg->trbs[TRBS_PER_SEGMENT - 1];
+		num += last_on_seg - start;
+		start_seg = start_seg->next;
+		start = start_seg->trbs;
+	} while (i++ <= num_segs);
+
+	return -EINVAL;
+}
+
 /*
  * Check to see if there's room to enqueue num_trbs on the ring and make sure
  * enqueue pointer will not advance into dequeue segment. See rules above.
@@ -2140,6 +2160,7 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
 		     u32 trb_comp_code)
 {
 	struct xhci_ep_ctx *ep_ctx;
+	int trbs_freed;
 
 	ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep->ep_index);
 
@@ -2209,9 +2230,15 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
 	}
 
 	/* Update ring dequeue pointer */
+	trbs_freed = xhci_num_trbs_to(ep_ring->deq_seg, ep_ring->dequeue,
+				      td->last_trb_seg, td->last_trb,
+				      ep_ring->num_segs);
+	if (trbs_freed < 0)
+		xhci_dbg(xhci, "Failed to count freed trbs at TD finish\n");
+	else
+		ep_ring->num_trbs_free += trbs_freed;
 	ep_ring->dequeue = td->last_trb;
 	ep_ring->deq_seg = td->last_trb_seg;
-	ep_ring->num_trbs_free += td->num_trbs - 1;
 	inc_deq(xhci, ep_ring);
 
 	return xhci_td_cleanup(xhci, td, ep_ring, td->status);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 047b290404b4..f845c15073ba 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1901,7 +1901,7 @@ struct xhci_hcd {
 #define XHCI_DISABLE_SPARSE	BIT_ULL(38)
 #define XHCI_SG_TRB_CACHE_SIZE_QUIRK	BIT_ULL(39)
 #define XHCI_NO_SOFT_RETRY	BIT_ULL(40)
-#define XHCI_BROKEN_D3COLD	BIT_ULL(41)
+#define XHCI_BROKEN_D3COLD_S2I	BIT_ULL(41)
 #define XHCI_EP_CTX_BROKEN_DCS	BIT_ULL(42)
 #define XHCI_SUSPEND_RESUME_CLKS	BIT_ULL(43)
 #define XHCI_RESET_TO_DEFAULT	BIT_ULL(44)