diff options
author | Manu Gautam <mgautam@codeaurora.org> | 2013-07-03 05:13:51 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-07-25 20:49:30 +0200 |
commit | 1353aa53851e3bc7f2c6365753d9c2783c34f882 (patch) | |
tree | 55fabf3384518681635ccad23702ebe51485bf02 /drivers/usb/misc/Kconfig | |
parent | usb: clamp bInterval to allowed range (diff) | |
download | linux-1353aa53851e3bc7f2c6365753d9c2783c34f882.tar.xz linux-1353aa53851e3bc7f2c6365753d9c2783c34f882.zip |
usb: misc: EHSET Test Fixture device driver for host compliance
An Embedded Host High-Speed Electrical Test (EHSET) test fixture is
used to initiate test modes on a host controller in order to perform
the high speed electrical testing procedure for USB-IF compliance.
When this test fixture is connected to a host, it can enumerate as
one of several selectable VID/PID pairs, each corresponding to one
of the following test modes:
* TEST_SE0_NAK
* TEST_J
* TEST_K
* TEST_PACKET
* HS_HOST_PORT_SUSPEND_RESUME
* SINGLE_STEP_GET_DEV_DESC
* SINGLE_STEP_SET_FEATURE
The USB EHSET procedure can be found here:
http://www.usb.org/developers/onthego/EHSET_v1.01.pdf
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
[jackp@codeaurora.org: imported from commit 073c9409 on codeaurora.org;
minor cleanup and updated author email]
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/misc/Kconfig')
-rw-r--r-- | drivers/usb/misc/Kconfig | 13 |
1 files changed, 13 insertions, 0 deletions
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index a51e7d6afda9..ca91420f5c21 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -200,6 +200,19 @@ config USB_TEST See <http://www.linux-usb.org/usbtest/> for more information, including sample test device firmware and "how to use it". +config USB_EHSET_TEST_FIXTURE + tristate "USB EHSET Test Fixture driver" + help + Say Y here if you want to support the special test fixture device + used for the USB-IF Embedded Host High-Speed Electrical Test procedure. + + When the test fixture is connected, it can enumerate as one of several + VID/PID pairs. This driver then initiates a corresponding test mode on + the downstream port to which the test fixture is attached. + + See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more + information. + config USB_ISIGHTFW tristate "iSight firmware loading support" select FW_LOADER |