diff options
| author | Chunfeng Yun <chunfeng.yun@mediatek.com> | 2023-01-19 04:33:22 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2023-01-19 14:12:08 +0100 |
| commit | 5aba179c34291ef67206bce6fa0fe0873c8dfc4e (patch) | |
| tree | 0d151b7957eb8882ad420281f62314e4c42aba5a /drivers/usb/mtu3 | |
| parent | usb: fotg210-udc: Implement VBUS session (diff) | |
| download | linux-5aba179c34291ef67206bce6fa0fe0873c8dfc4e.tar.xz linux-5aba179c34291ef67206bce6fa0fe0873c8dfc4e.zip | |
usb: mtu3: fix the failure of qmu stop
This happens when do stress test of uvc stream on/off which will
enable/disable endpoints. uvc has four tx requests, and may disable
endpoint between queue tx requests as following:
enable ep --> start qmu
queue tx request0
queue tx request1
queue tx request2 --> resume qmu
disable ep --> stop qmu may fail [1]
queue tx request3 --> will resume qmu, may cause qmu can't work
when enable ep next time [2]
[1]: when the tx fifo has some data to transmit, and
try to stop qmu (stop ep) meanwhile resume qmu (queue tx request),
it may cause stop qmu timeout, then can be fixed by flushing fifo
when stop qmu.
[2]: it resumes qmu again, shall stop qmu again.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reported-by: Min Guo <min.guo@mediatek.com>
Link: https://lore.kernel.org/r/20230119033322.21426-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/mtu3')
| -rw-r--r-- | drivers/usb/mtu3/mtu3_gadget.c | 3 | ||||
| -rw-r--r-- | drivers/usb/mtu3/mtu3_hw_regs.h | 1 | ||||
| -rw-r--r-- | drivers/usb/mtu3/mtu3_qmu.c | 7 |
3 files changed, 9 insertions, 2 deletions
diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c index 80236e7b0895..c0264d5426bf 100644 --- a/drivers/usb/mtu3/mtu3_gadget.c +++ b/drivers/usb/mtu3/mtu3_gadget.c @@ -133,10 +133,9 @@ static int mtu3_ep_disable(struct mtu3_ep *mep) { struct mtu3 *mtu = mep->mtu; - mtu3_qmu_stop(mep); - /* abort all pending requests */ nuke(mep, -ESHUTDOWN); + mtu3_qmu_stop(mep); mtu3_deconfig_ep(mtu, mep); mtu3_gpd_ring_free(mep); diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h index 519a58301f45..ee30ae0a4b54 100644 --- a/drivers/usb/mtu3/mtu3_hw_regs.h +++ b/drivers/usb/mtu3/mtu3_hw_regs.h @@ -128,6 +128,7 @@ #define TX_FIFOEMPTY BIT(24) #define TX_SENTSTALL BIT(22) #define TX_SENDSTALL BIT(21) +#define TX_FLUSHFIFO BIT(20) #define TX_TXPKTRDY BIT(16) #define TX_TXMAXPKTSZ_MSK GENMASK(10, 0) #define TX_TXMAXPKTSZ(x) ((x) & TX_TXMAXPKTSZ_MSK) diff --git a/drivers/usb/mtu3/mtu3_qmu.c b/drivers/usb/mtu3/mtu3_qmu.c index 2ea3157ddb6e..a2fdab8b63b2 100644 --- a/drivers/usb/mtu3/mtu3_qmu.c +++ b/drivers/usb/mtu3/mtu3_qmu.c @@ -388,6 +388,9 @@ void mtu3_qmu_stop(struct mtu3_ep *mep) } mtu3_writel(mbase, qcsr, QMU_Q_STOP); + if (mep->is_in) + mtu3_setbits(mbase, MU3D_EP_TXCR0(epnum), TX_FLUSHFIFO); + ret = readl_poll_timeout_atomic(mbase + qcsr, value, !(value & QMU_Q_ACTIVE), 1, 1000); if (ret) { @@ -395,6 +398,10 @@ void mtu3_qmu_stop(struct mtu3_ep *mep) return; } + /* flush fifo again to make sure the fifo is empty */ + if (mep->is_in) + mtu3_setbits(mbase, MU3D_EP_TXCR0(epnum), TX_FLUSHFIFO); + dev_dbg(mtu->dev, "%s's qmu stop now!\n", mep->name); } |