usb: musb: drop unneeded musb_debug trickery

We have a generic way of enabling/disabling
different debug messages on a driver called
DYNAMIC_PRINTK. Anyone interested in enabling
just part of the debug messages, please read
the documentation under:

Documentation/dynamic-debug-howto.txt

for information on how to use that great
infrastructure.

Signed-off-by: Felipe Balbi <balbi@ti.com>

1 files changed, 10 insertions, 10 deletions

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index b996fec84c29..c5d4c44d0ffa 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -76,7 +76,7 @@ static void musb_do_idle(unsigned long _musb)
 		if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
 			power = musb_readb(musb->mregs, MUSB_POWER);
 			power &= ~MUSB_POWER_RESUME;
-			DBG(1, "root port resume stopped, power %02x\n", power);
+			dev_dbg(musb->controller, "root port resume stopped, power %02x\n", power);
 			musb_writeb(musb->mregs, MUSB_POWER, power);
 			musb->is_active = 1;
 			musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
@@ -114,7 +114,7 @@ static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
 	/* Never idle if active, or when VBUS timeout is not set as host */
 	if (musb->is_active || ((musb->a_wait_bcon == 0)
 			&& (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
-		DBG(4, "%s active, deleting timer\n",
+		dev_dbg(musb->controller, "%s active, deleting timer\n",
 			otg_state_string(musb->xceiv->state));
 		del_timer(&musb_idle_timer);
 		last_timer = jiffies;
@@ -125,13 +125,13 @@ static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
 		if (!timer_pending(&musb_idle_timer))
 			last_timer = timeout;
 		else {
-			DBG(4, "Longer idle timer already pending, ignoring\n");
+			dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n");
 			return;
 		}
 	}
 	last_timer = timeout;
 
-	DBG(4, "%s inactive, for idle timer for %lu ms\n",
+	dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
 		otg_state_string(musb->xceiv->state),
 		(unsigned long)jiffies_to_msecs(timeout - jiffies));
 	mod_timer(&musb_idle_timer, timeout);
@@ -194,7 +194,7 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
 	}
 	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
-	DBG(1, "VBUS %s, devctl %02x "
+	dev_dbg(musb->controller, "VBUS %s, devctl %02x "
 		/* otg %3x conf %08x prcm %08x */ "\n",
 		otg_state_string(musb->xceiv->state),
 		musb_readb(musb->mregs, MUSB_DEVCTL));
@@ -240,7 +240,7 @@ static int musb_otg_notifications(struct notifier_block *nb,
 
 	switch (event) {
 	case USB_EVENT_ID:
-		DBG(4, "ID GND\n");
+		dev_dbg(musb->controller, "ID GND\n");
 
 		if (is_otg_enabled(musb)) {
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
@@ -258,7 +258,7 @@ static int musb_otg_notifications(struct notifier_block *nb,
 		break;
 
 	case USB_EVENT_VBUS:
-		DBG(4, "VBUS Connect\n");
+		dev_dbg(musb->controller, "VBUS Connect\n");
 
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
 		if (musb->gadget_driver)
@@ -268,7 +268,7 @@ static int musb_otg_notifications(struct notifier_block *nb,
 		break;
 
 	case USB_EVENT_NONE:
-		DBG(4, "VBUS Disconnect\n");
+		dev_dbg(musb->controller, "VBUS Disconnect\n");
 
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
 		if (is_otg_enabled(musb) || is_peripheral_enabled(musb))
@@ -286,7 +286,7 @@ static int musb_otg_notifications(struct notifier_block *nb,
 		otg_shutdown(musb->xceiv);
 		break;
 	default:
-		DBG(4, "ID float\n");
+		dev_dbg(musb->controller, "ID float\n");
 		return NOTIFY_DONE;
 	}
 
@@ -340,7 +340,7 @@ static int omap2430_musb_init(struct musb *musb)
 	status = otg_register_notifier(musb->xceiv, &musb->nb);
 
 	if (status)
-		DBG(1, "notification register failed\n");
+		dev_dbg(musb->controller, "notification register failed\n");
 
 	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);