usb: musb: drop unneeded musb_debug trickery

We have a generic way of enabling/disabling
different debug messages on a driver called
DYNAMIC_PRINTK. Anyone interested in enabling
just part of the debug messages, please read
the documentation under:

Documentation/dynamic-debug-howto.txt

for information on how to use that great
infrastructure.

Signed-off-by: Felipe Balbi <balbi@ti.com>

1 files changed, 16 insertions, 16 deletions

diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 99cb541e4ef0..c784e6c03aac 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -65,7 +65,7 @@ static int tusb_omap_dma_start(struct dma_controller *c)
 
 	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
 
-	/* DBG(3, "ep%i ch: %i\n", chdat->epnum, chdat->ch); */
+	/* dev_dbg(musb->controller, "ep%i ch: %i\n", chdat->epnum, chdat->ch); */
 
 	return 0;
 }
@@ -76,7 +76,7 @@ static int tusb_omap_dma_stop(struct dma_controller *c)
 
 	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
 
-	/* DBG(3, "ep%i ch: %i\n", chdat->epnum, chdat->ch); */
+	/* dev_dbg(musb->controller, "ep%i ch: %i\n", chdat->epnum, chdat->ch); */
 
 	return 0;
 }
@@ -89,7 +89,7 @@ static inline int tusb_omap_use_shared_dmareq(struct tusb_omap_dma_ch *chdat)
 	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
 
 	if (reg != 0) {
-		DBG(3, "ep%i dmareq0 is busy for ep%i\n",
+		dev_dbg(musb->controller, "ep%i dmareq0 is busy for ep%i\n",
 			chdat->epnum, reg & 0xf);
 		return -EAGAIN;
 	}
@@ -143,7 +143,7 @@ static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data)
 	if (ch_status != OMAP_DMA_BLOCK_IRQ)
 		printk(KERN_ERR "TUSB DMA error status: %i\n", ch_status);
 
-	DBG(3, "ep%i %s dma callback ch: %i status: %x\n",
+	dev_dbg(musb->controller, "ep%i %s dma callback ch: %i status: %x\n",
 		chdat->epnum, chdat->tx ? "tx" : "rx",
 		ch, ch_status);
 
@@ -156,7 +156,7 @@ static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data)
 
 	/* HW issue #10: XFR_SIZE may get corrupt on DMA (both async & sync) */
 	if (unlikely(remaining > chdat->transfer_len)) {
-		DBG(2, "Corrupt %s dma ch%i XFR_SIZE: 0x%08lx\n",
+		dev_dbg(musb->controller, "Corrupt %s dma ch%i XFR_SIZE: 0x%08lx\n",
 			chdat->tx ? "tx" : "rx", chdat->ch,
 			remaining);
 		remaining = 0;
@@ -165,13 +165,13 @@ static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data)
 	channel->actual_len = chdat->transfer_len - remaining;
 	pio = chdat->len - channel->actual_len;
 
-	DBG(3, "DMA remaining %lu/%u\n", remaining, chdat->transfer_len);
+	dev_dbg(musb->controller, "DMA remaining %lu/%u\n", remaining, chdat->transfer_len);
 
 	/* Transfer remaining 1 - 31 bytes */
 	if (pio > 0 && pio < 32) {
 		u8	*buf;
 
-		DBG(3, "Using PIO for remaining %lu bytes\n", pio);
+		dev_dbg(musb->controller, "Using PIO for remaining %lu bytes\n", pio);
 		buf = phys_to_virt((u32)chdat->dma_addr) + chdat->transfer_len;
 		if (chdat->tx) {
 			dma_unmap_single(dev, chdat->dma_addr,
@@ -209,7 +209,7 @@ static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data)
 		u16	csr;
 
 		if (chdat->tx) {
-			DBG(3, "terminating short tx packet\n");
+			dev_dbg(musb->controller, "terminating short tx packet\n");
 			musb_ep_select(mbase, chdat->epnum);
 			csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
 			csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY
@@ -264,7 +264,7 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
 
 	dma_remaining = TUSB_EP_CONFIG_XFR_SIZE(dma_remaining);
 	if (dma_remaining) {
-		DBG(2, "Busy %s dma ch%i, not using: %08x\n",
+		dev_dbg(musb->controller, "Busy %s dma ch%i, not using: %08x\n",
 			chdat->tx ? "tx" : "rx", chdat->ch,
 			dma_remaining);
 		return false;
@@ -283,7 +283,7 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
 		sync_dev = chdat->sync_dev;
 	} else {
 		if (tusb_omap_use_shared_dmareq(chdat) != 0) {
-			DBG(3, "could not get dma for ep%i\n", chdat->epnum);
+			dev_dbg(musb->controller, "could not get dma for ep%i\n", chdat->epnum);
 			return false;
 		}
 		if (tusb_dma->ch < 0) {
@@ -326,7 +326,7 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
 
 	dma_params.frame_count	= chdat->transfer_len / 32; /* Burst sz frame */
 
-	DBG(3, "ep%i %s dma ch%i dma: %08x len: %u(%u) packet_sz: %i(%i)\n",
+	dev_dbg(musb->controller, "ep%i %s dma ch%i dma: %08x len: %u(%u) packet_sz: %i(%i)\n",
 		chdat->epnum, chdat->tx ? "tx" : "rx",
 		ch, dma_addr, chdat->transfer_len, len,
 		chdat->transfer_packet_sz, packet_sz);
@@ -370,7 +370,7 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
 		dst_burst = OMAP_DMA_DATA_BURST_16;	/* 16x32 write */
 	}
 
-	DBG(3, "ep%i %s using %i-bit %s dma from 0x%08lx to 0x%08lx\n",
+	dev_dbg(musb->controller, "ep%i %s using %i-bit %s dma from 0x%08lx to 0x%08lx\n",
 		chdat->epnum, chdat->tx ? "tx" : "rx",
 		(dma_params.data_type == OMAP_DMA_DATA_TYPE_S32) ? 32 : 16,
 		((dma_addr & 0x3) == 0) ? "sync" : "async",
@@ -525,7 +525,7 @@ tusb_omap_dma_allocate(struct dma_controller *c,
 
 	/* REVISIT: Why does dmareq5 not work? */
 	if (hw_ep->epnum == 0) {
-		DBG(3, "Not allowing DMA for ep0 %s\n", tx ? "tx" : "rx");
+		dev_dbg(musb->controller, "Not allowing DMA for ep0 %s\n", tx ? "tx" : "rx");
 		return NULL;
 	}
 
@@ -585,7 +585,7 @@ tusb_omap_dma_allocate(struct dma_controller *c,
 		chdat->ch = -1;
 	}
 
-	DBG(3, "ep%i %s dma: %s dma%i dmareq%i sync%i\n",
+	dev_dbg(musb->controller, "ep%i %s dma: %s dma%i dmareq%i sync%i\n",
 		chdat->epnum,
 		chdat->tx ? "tx" : "rx",
 		chdat->ch >= 0 ? "dedicated" : "shared",
@@ -598,7 +598,7 @@ tusb_omap_dma_allocate(struct dma_controller *c,
 free_dmareq:
 	tusb_omap_dma_free_dmareq(chdat);
 
-	DBG(3, "ep%i: Could not get a DMA channel\n", chdat->epnum);
+	dev_dbg(musb->controller, "ep%i: Could not get a DMA channel\n", chdat->epnum);
 	channel->status = MUSB_DMA_STATUS_UNKNOWN;
 
 	return NULL;
@@ -611,7 +611,7 @@ static void tusb_omap_dma_release(struct dma_channel *channel)
 	void __iomem		*tbase = musb->ctrl_base;
 	u32			reg;
 
-	DBG(3, "ep%i ch%i\n", chdat->epnum, chdat->ch);
+	dev_dbg(musb->controller, "ep%i ch%i\n", chdat->epnum, chdat->ch);
 
 	reg = musb_readl(tbase, TUSB_DMA_INT_MASK);
 	if (chdat->tx)