[PATCH] USB: usbnet (5/9) module for genesys gl620a cables

This moves the GeneSys GL620USB-A support into its own driver file.
It also fixes a "return wrong skb" glitch in the rx unbatching, as
recently reported, and adds some missing byteswaps in the special
"genelink" headers (so it might now work on big-endian Linux).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 1 insertions, 349 deletions

diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 590bf31ae1f4..d52480aced80 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -156,9 +156,6 @@
 // us (it polls at HZ/4 usually) before we report too many false errors.
 #define THROTTLE_JIFFIES	(HZ/8)
 
-// for vendor-specific control operations
-#define	CONTROL_TIMEOUT_MS	USB_CTRL_GET_TIMEOUT
-
 // between wakeups
 #define UNLINK_TIMEOUT_MS	3
 
@@ -690,341 +687,6 @@ static const struct driver_info	cdc_info = {
 
 
 
-#ifdef CONFIG_USB_GENESYS
-#define	HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * GeneSys GL620USB-A (www.genesyslogic.com.tw)
- *
- * ... should partially interop with the Win32 driver for this hardware
- * The GeneSys docs imply there's some NDIS issue motivating this framing.
- *
- * Some info from GeneSys:
- *  - GL620USB-A is full duplex; GL620USB is only half duplex for bulk.
- *    (Some cables, like the BAFO-100c, use the half duplex version.)
- *  - For the full duplex model, the low bit of the version code says
- *    which side is which ("left/right").
- *  - For the half duplex type, a control/interrupt handshake settles
- *    the transfer direction.  (That's disabled here, partially coded.)
- *    A control URB would block until other side writes an interrupt.
- *
- * Original code from Jiun-Jie Huang <huangjj@genesyslogic.com.tw>
- * and merged into "usbnet" by Stanislav Brabec <utx@penguin.cz>.
- *
- *-------------------------------------------------------------------------*/
-
-// control msg write command
-#define GENELINK_CONNECT_WRITE			0xF0
-// interrupt pipe index
-#define GENELINK_INTERRUPT_PIPE			0x03
-// interrupt read buffer size
-#define INTERRUPT_BUFSIZE			0x08
-// interrupt pipe interval value
-#define GENELINK_INTERRUPT_INTERVAL		0x10
-// max transmit packet number per transmit
-#define GL_MAX_TRANSMIT_PACKETS			32
-// max packet length
-#define GL_MAX_PACKET_LEN			1514
-// max receive buffer size 
-#define GL_RCV_BUF_SIZE		\
-	(((GL_MAX_PACKET_LEN + 4) * GL_MAX_TRANSMIT_PACKETS) + 4)
-
-struct gl_packet {
-	u32		packet_length;
-	char		packet_data [1];
-};
-
-struct gl_header {
-	u32			packet_count;
-	struct gl_packet	packets;
-};
-
-#ifdef	GENELINK_ACK
-
-// FIXME:  this code is incomplete, not debugged; it doesn't
-// handle interrupts correctly.  interrupts should be generic
-// code like all other device I/O, anyway.
-
-struct gl_priv { 
-	struct urb	*irq_urb;
-	char		irq_buf [INTERRUPT_BUFSIZE];
-};
-
-static inline int gl_control_write (struct usbnet *dev, u8 request, u16 value)
-{
-	int retval;
-
-	retval = usb_control_msg (dev->udev,
-		      usb_sndctrlpipe (dev->udev, 0),
-		      request,
-		      USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-		      value, 
-		      0,			// index
-		      0,			// data buffer
-		      0,			// size
-		      CONTROL_TIMEOUT_MS);
-	return retval;
-}
-
-static void gl_interrupt_complete (struct urb *urb, struct pt_regs *regs)
-{
-	int status = urb->status;
-	
-	switch (status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-				__FUNCTION__, status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d",
-				__FUNCTION__, urb->status);
-	}
-
-	status = usb_submit_urb (urb, GFP_ATOMIC);
-	if (status)
-		err ("%s - usb_submit_urb failed with result %d",
-		     __FUNCTION__, status);
-}
-
-static int gl_interrupt_read (struct usbnet *dev)
-{
-	struct gl_priv	*priv = dev->priv_data;
-	int		retval;
-
-	// issue usb interrupt read
-	if (priv && priv->irq_urb) {
-		// submit urb
-		if ((retval = usb_submit_urb (priv->irq_urb, GFP_KERNEL)) != 0)
-			dbg ("gl_interrupt_read: submit fail - %X...", retval);
-		else
-			dbg ("gl_interrupt_read: submit success...");
-	}
-
-	return 0;
-}
-
-// check whether another side is connected
-static int genelink_check_connect (struct usbnet *dev)
-{
-	int			retval;
-
-	dbg ("genelink_check_connect...");
-
-	// detect whether another side is connected
-	if ((retval = gl_control_write (dev, GENELINK_CONNECT_WRITE, 0)) != 0) {
-		dbg ("%s: genelink_check_connect write fail - %X",
-			dev->net->name, retval);
-		return retval;
-	}
-
-	// usb interrupt read to ack another side 
-	if ((retval = gl_interrupt_read (dev)) != 0) {
-		dbg ("%s: genelink_check_connect read fail - %X",
-			dev->net->name, retval);
-		return retval;
-	}
-
-	dbg ("%s: genelink_check_connect read success", dev->net->name);
-	return 0;
-}
-
-// allocate and initialize the private data for genelink
-static int genelink_init (struct usbnet *dev)
-{
-	struct gl_priv *priv;
-
-	// allocate the private data structure
-	if ((priv = kmalloc (sizeof *priv, GFP_KERNEL)) == 0) {
-		dbg ("%s: cannot allocate private data per device",
-			dev->net->name);
-		return -ENOMEM;
-	}
-
-	// allocate irq urb
-	if ((priv->irq_urb = usb_alloc_urb (0, GFP_KERNEL)) == 0) {
-		dbg ("%s: cannot allocate private irq urb per device",
-			dev->net->name);
-		kfree (priv);
-		return -ENOMEM;
-	}
-
-	// fill irq urb
-	usb_fill_int_urb (priv->irq_urb, dev->udev,
-		usb_rcvintpipe (dev->udev, GENELINK_INTERRUPT_PIPE),
-		priv->irq_buf, INTERRUPT_BUFSIZE,
-		gl_interrupt_complete, 0,
-		GENELINK_INTERRUPT_INTERVAL);
-
-	// set private data pointer
-	dev->priv_data = priv;
-
-	return 0;
-}
-
-// release the private data
-static int genelink_free (struct usbnet *dev)
-{
-	struct gl_priv	*priv = dev->priv_data;
-
-	if (!priv) 
-		return 0;
-
-// FIXME:  can't cancel here; it's synchronous, and
-// should have happened earlier in any case (interrupt
-// handling needs to be generic)
-
-	// cancel irq urb first
-	usb_kill_urb (priv->irq_urb);
-
-	// free irq urb
-	usb_free_urb (priv->irq_urb);
-
-	// free the private data structure
-	kfree (priv);
-
-	return 0;
-}
-
-#endif
-
-static int genelink_rx_fixup (struct usbnet *dev, struct sk_buff *skb)
-{
-	struct gl_header	*header;
-	struct gl_packet	*packet;
-	struct sk_buff		*gl_skb;
-	u32			size;
-
-	header = (struct gl_header *) skb->data;
-
-	// get the packet count of the received skb
-	le32_to_cpus (&header->packet_count);
-	if ((header->packet_count > GL_MAX_TRANSMIT_PACKETS)
-			|| (header->packet_count < 0)) {
-		dbg ("genelink: invalid received packet count %d",
-			header->packet_count);
-		return 0;
-	}
-
-	// set the current packet pointer to the first packet
-	packet = &header->packets;
-
-	// decrement the length for the packet count size 4 bytes
-	skb_pull (skb, 4);
-
-	while (header->packet_count > 1) {
-		// get the packet length
-		size = packet->packet_length;
-
-		// this may be a broken packet
-		if (size > GL_MAX_PACKET_LEN) {
-			dbg ("genelink: invalid rx length %d", size);
-			return 0;
-		}
-
-		// allocate the skb for the individual packet
-		gl_skb = alloc_skb (size, GFP_ATOMIC);
-		if (gl_skb) {
-
-			// copy the packet data to the new skb
-			memcpy(skb_put(gl_skb, size), packet->packet_data, size);
-			usbnet_skb_return (dev, gl_skb);
-		}
-
-		// advance to the next packet
-		packet = (struct gl_packet *)
-			&packet->packet_data [size];
-		header->packet_count--;
-
-		// shift the data pointer to the next gl_packet
-		skb_pull (skb, size + 4);
-	}
-
-	// skip the packet length field 4 bytes
-	skb_pull (skb, 4);
-
-	if (skb->len > GL_MAX_PACKET_LEN) {
-		dbg ("genelink: invalid rx length %d", skb->len);
-		return 0;
-	}
-	return 1;
-}
-
-static struct sk_buff *
-genelink_tx_fixup (struct usbnet *dev, struct sk_buff *skb, unsigned flags)
-{
-	int 	padlen;
-	int	length = skb->len;
-	int	headroom = skb_headroom (skb);
-	int	tailroom = skb_tailroom (skb);
-	u32	*packet_count;
-	u32	*packet_len;
-
-	// FIXME:  magic numbers, bleech
-	padlen = ((skb->len + (4 + 4*1)) % 64) ? 0 : 1;
-
-	if ((!skb_cloned (skb))
-			&& ((headroom + tailroom) >= (padlen + (4 + 4*1)))) {
-		if ((headroom < (4 + 4*1)) || (tailroom < padlen)) {
-			skb->data = memmove (skb->head + (4 + 4*1),
-					     skb->data, skb->len);
-			skb->tail = skb->data + skb->len;
-		}
-	} else {
-		struct sk_buff	*skb2;
-		skb2 = skb_copy_expand (skb, (4 + 4*1) , padlen, flags);
-		dev_kfree_skb_any (skb);
-		skb = skb2;
-		if (!skb)
-			return NULL;
-	}
-
-	// attach the packet count to the header
-	packet_count = (u32 *) skb_push (skb, (4 + 4*1));
-	packet_len = packet_count + 1;
-
-	// FIXME little endian?
-	*packet_count = 1;
-	*packet_len = length;
-
-	// add padding byte
-	if ((skb->len % dev->maxpacket) == 0)
-		skb_put (skb, 1);
-
-	return skb;
-}
-
-static int genelink_bind (struct usbnet *dev, struct usb_interface *intf)
-{
-	dev->hard_mtu = GL_RCV_BUF_SIZE;
-	dev->net->hard_header_len += 4;
-	return 0;
-}
-
-static const struct driver_info	genelink_info = {
-	.description =	"Genesys GeneLink",
-	.flags =	FLAG_FRAMING_GL | FLAG_NO_SETINT,
-	.bind =		genelink_bind,
-	.rx_fixup =	genelink_rx_fixup,
-	.tx_fixup =	genelink_tx_fixup,
-
-	.in = 1, .out = 2,
-
-#ifdef	GENELINK_ACK
-	.check_connect =genelink_check_connect,
-#endif
-};
-
-#endif /* CONFIG_USB_GENESYS */
-
-
-
 #ifdef CONFIG_USB_PL2301
 #define	HAVE_HARDWARE
 
@@ -1059,7 +721,7 @@ pl_vendor_req (struct usbnet *dev, u8 req, u8 val, u8 index)
 		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		val, index,
 		NULL, 0,
-		CONTROL_TIMEOUT_MS);
+		USB_CTRL_GET_TIMEOUT);
 }
 
 static inline int
@@ -2323,16 +1985,6 @@ EXPORT_SYMBOL_GPL(usbnet_resume);
 
 static const struct usb_device_id	products [] = {
 
-#ifdef	CONFIG_USB_GENESYS
-{
-	USB_DEVICE (0x05e3, 0x0502),	// GL620USB-A
-	.driver_info =	(unsigned long) &genelink_info,
-},
-	/* NOT: USB_DEVICE (0x05e3, 0x0501),	// GL620USB
-	 * that's half duplex, not currently supported
-	 */
-#endif
-
 #ifdef CONFIG_USB_PL2301
 {
 	USB_DEVICE (0x067b, 0x0000),	// PL-2301