Merge tag 'usb-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.20 merge window

Here's the big pull request for Gadgets and PHYs. It's
a total of 217 non-merge commits with pretty much everything
being touched.

The most important bits are a ton of new documentation for
almost all usb gadget functions, a new isp1760 UDC driver,
several improvements to the old net2280 UDC driver, and
some minor tracepoint improvements to dwc3.

Other than that, a big list of minor cleanups, smaller bugfixes
and new features all over the place.

Signed-off-by: Felipe Balbi <balbi@ti.com>

4 files changed, 199 insertions, 82 deletions

diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index ab38aa32a6c1..94eb2923afed 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -107,19 +107,6 @@ static void (*_fsl_writel)(u32 v, unsigned __iomem *p);
 #define fsl_writel(val, addr)	writel(val, addr)
 #endif /* CONFIG_PPC32 */
 
-/* Routines to access transceiver ULPI registers */
-u8 view_ulpi(u8 addr)
-{
-	u32 temp;
-
-	temp = 0x40000000 | (addr << 16);
-	fsl_writel(temp, &usb_dr_regs->ulpiview);
-	udelay(1000);
-	while (temp & 0x40)
-		temp = fsl_readl(&usb_dr_regs->ulpiview);
-	return (le32_to_cpu(temp) & 0x0000ff00) >> 8;
-}
-
 int write_ulpi(u8 addr, u8 data)
 {
 	u32 temp;
@@ -460,28 +447,6 @@ static void fsl_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
 	fsl_otg_del_timer(fsm, timer);
 }
 
-/*
- * Reduce timer count by 1, and find timeout conditions.
- * Called by fsl_otg 1ms timer interrupt
- */
-int fsl_otg_tick_timer(void)
-{
-	struct fsl_otg_timer *tmp_timer, *del_tmp;
-	int expired = 0;
-
-	list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
-		tmp_timer->count--;
-		/* check if timer expires */
-		if (!tmp_timer->count) {
-			list_del(&tmp_timer->list);
-			tmp_timer->function(tmp_timer->data);
-			expired = 1;
-		}
-	}
-
-	return expired;
-}
-
 /* Reset controller, not reset the bus */
 void otg_reset_controller(void)
 {
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index f1b719b45a53..70be50b734b2 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -27,6 +27,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/usb_phy_generic.h>
 #include <linux/slab.h>
@@ -39,6 +40,10 @@
 
 #include "phy-generic.h"
 
+#define VBUS_IRQ_FLAGS \
+	(IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | \
+		IRQF_ONESHOT)
+
 struct platform_device *usb_phy_generic_register(void)
 {
 	return platform_device_register_simple("usb_phy_generic",
@@ -59,19 +64,79 @@ static int nop_set_suspend(struct usb_phy *x, int suspend)
 
 static void nop_reset_set(struct usb_phy_generic *nop, int asserted)
 {
-	int value;
+	if (!nop->gpiod_reset)
+		return;
+
+	gpiod_direction_output(nop->gpiod_reset, !asserted);
+	usleep_range(10000, 20000);
+	gpiod_set_value(nop->gpiod_reset, asserted);
+}
+
+/* interface to regulator framework */
+static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA)
+{
+	struct regulator *vbus_draw = nop->vbus_draw;
+	int enabled;
+	int ret;
 
-	if (!gpio_is_valid(nop->gpio_reset))
+	if (!vbus_draw)
 		return;
 
-	value = asserted;
-	if (nop->reset_active_low)
-		value = !value;
+	enabled = nop->vbus_draw_enabled;
+	if (mA) {
+		regulator_set_current_limit(vbus_draw, 0, 1000 * mA);
+		if (!enabled) {
+			ret = regulator_enable(vbus_draw);
+			if (ret < 0)
+				return;
+			nop->vbus_draw_enabled = 1;
+		}
+	} else {
+		if (enabled) {
+			ret = regulator_disable(vbus_draw);
+			if (ret < 0)
+				return;
+			nop->vbus_draw_enabled = 0;
+		}
+	}
+	nop->mA = mA;
+}
+
+
+static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
+{
+	struct usb_phy_generic *nop = data;
+	struct usb_otg *otg = nop->phy.otg;
+	int vbus, status;
+
+	vbus = gpiod_get_value(nop->gpiod_vbus);
+	if ((vbus ^ nop->vbus) == 0)
+		return IRQ_HANDLED;
+	nop->vbus = vbus;
+
+	if (vbus) {
+		status = USB_EVENT_VBUS;
+		otg->state = OTG_STATE_B_PERIPHERAL;
+		nop->phy.last_event = status;
+		usb_gadget_vbus_connect(otg->gadget);
+
+		/* drawing a "unit load" is *always* OK, except for OTG */
+		nop_set_vbus_draw(nop, 100);
+
+		atomic_notifier_call_chain(&nop->phy.notifier, status,
+					   otg->gadget);
+	} else {
+		nop_set_vbus_draw(nop, 0);
 
-	gpio_set_value_cansleep(nop->gpio_reset, value);
+		usb_gadget_vbus_disconnect(otg->gadget);
+		status = USB_EVENT_NONE;
+		otg->state = OTG_STATE_B_IDLE;
+		nop->phy.last_event = status;
 
-	if (!asserted)
-		usleep_range(10000, 20000);
+		atomic_notifier_call_chain(&nop->phy.notifier, status,
+					   otg->gadget);
+	}
+	return IRQ_HANDLED;
 }
 
 int usb_gen_phy_init(struct usb_phy *phy)
@@ -143,36 +208,47 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
 		struct usb_phy_generic_platform_data *pdata)
 {
 	enum usb_phy_type type = USB_PHY_TYPE_USB2;
-	int err;
+	int err = 0;
 
 	u32 clk_rate = 0;
 	bool needs_vcc = false;
 
-	nop->reset_active_low = true;	/* default behaviour */
-
 	if (dev->of_node) {
 		struct device_node *node = dev->of_node;
-		enum of_gpio_flags flags = 0;
 
 		if (of_property_read_u32(node, "clock-frequency", &clk_rate))
 			clk_rate = 0;
 
 		needs_vcc = of_property_read_bool(node, "vcc-supply");
-		nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios",
-								0, &flags);
-		if (nop->gpio_reset == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-
-		nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
-
+		nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset");
+		err = PTR_ERR_OR_ZERO(nop->gpiod_reset);
+		if (!err) {
+			nop->gpiod_vbus = devm_gpiod_get_optional(dev,
+							 "vbus-detect");
+			err = PTR_ERR_OR_ZERO(nop->gpiod_vbus);
+		}
 	} else if (pdata) {
 		type = pdata->type;
 		clk_rate = pdata->clk_rate;
 		needs_vcc = pdata->needs_vcc;
-		nop->gpio_reset = pdata->gpio_reset;
-	} else {
-		nop->gpio_reset = -1;
+		if (gpio_is_valid(pdata->gpio_reset)) {
+			err = devm_gpio_request_one(dev, pdata->gpio_reset, 0,
+						    dev_name(dev));
+			if (!err)
+				nop->gpiod_reset =
+					gpio_to_desc(pdata->gpio_reset);
+		}
+		nop->gpiod_vbus = pdata->gpiod_vbus;
+	}
+
+	if (err == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (err) {
+		dev_err(dev, "Error requesting RESET or VBUS GPIO\n");
+		return err;
 	}
+	if (nop->gpiod_reset)
+		gpiod_direction_output(nop->gpiod_reset, 1);
 
 	nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg),
 			GFP_KERNEL);
@@ -201,24 +277,6 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
 			return -EPROBE_DEFER;
 	}
 
-	if (gpio_is_valid(nop->gpio_reset)) {
-		unsigned long gpio_flags;
-
-		/* Assert RESET */
-		if (nop->reset_active_low)
-			gpio_flags = GPIOF_OUT_INIT_LOW;
-		else
-			gpio_flags = GPIOF_OUT_INIT_HIGH;
-
-		err = devm_gpio_request_one(dev, nop->gpio_reset,
-						gpio_flags, dev_name(dev));
-		if (err) {
-			dev_err(dev, "Error requesting RESET GPIO %d\n",
-					nop->gpio_reset);
-			return err;
-		}
-	}
-
 	nop->dev		= dev;
 	nop->phy.dev		= nop->dev;
 	nop->phy.label		= "nop-xceiv";
@@ -247,6 +305,18 @@ static int usb_phy_generic_probe(struct platform_device *pdev)
 	err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev));
 	if (err)
 		return err;
+	if (nop->gpiod_vbus) {
+		err = devm_request_threaded_irq(&pdev->dev,
+						gpiod_to_irq(nop->gpiod_vbus),
+						NULL, nop_gpio_vbus_thread,
+						VBUS_IRQ_FLAGS, "vbus_detect",
+						nop);
+		if (err) {
+			dev_err(&pdev->dev, "can't request irq %i, err: %d\n",
+				gpiod_to_irq(nop->gpiod_vbus), err);
+			return err;
+		}
+	}
 
 	nop->phy.init		= usb_gen_phy_init;
 	nop->phy.shutdown	= usb_gen_phy_shutdown;
diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h
index d8feacc0b7fb..0d0eadd54ed9 100644
--- a/drivers/usb/phy/phy-generic.h
+++ b/drivers/usb/phy/phy-generic.h
@@ -2,14 +2,20 @@
 #define _PHY_GENERIC_H_
 
 #include <linux/usb/usb_phy_generic.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
 
 struct usb_phy_generic {
 	struct usb_phy phy;
 	struct device *dev;
 	struct clk *clk;
 	struct regulator *vcc;
-	int gpio_reset;
-	bool reset_active_low;
+	struct gpio_desc *gpiod_reset;
+	struct gpio_desc *gpiod_vbus;
+	struct regulator *vbus_draw;
+	bool vbus_draw_enabled;
+	unsigned long mA;
+	unsigned int vbus;
 };
 
 int usb_gen_phy_init(struct usb_phy *phy);
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index b9589f663683..8f7cb068d29b 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -40,6 +40,7 @@
 
 #define BM_USBPHY_CTRL_SFTRST			BIT(31)
 #define BM_USBPHY_CTRL_CLKGATE			BIT(30)
+#define BM_USBPHY_CTRL_OTG_ID_VALUE		BIT(27)
 #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS	BIT(26)
 #define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE	BIT(25)
 #define BM_USBPHY_CTRL_ENVBUSCHG_WKUP		BIT(23)
@@ -69,6 +70,9 @@
 #define ANADIG_USB2_LOOPBACK_SET		0x244
 #define ANADIG_USB2_LOOPBACK_CLR		0x248
 
+#define ANADIG_USB1_MISC			0x1f0
+#define ANADIG_USB2_MISC			0x250
+
 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	BIT(12)
 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
 
@@ -80,6 +84,11 @@
 #define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1	BIT(2)
 #define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN	BIT(5)
 
+#define BM_ANADIG_USB1_MISC_RX_VPIN_FS		BIT(29)
+#define BM_ANADIG_USB1_MISC_RX_VMIN_FS		BIT(28)
+#define BM_ANADIG_USB2_MISC_RX_VPIN_FS		BIT(29)
+#define BM_ANADIG_USB2_MISC_RX_VMIN_FS		BIT(28)
+
 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
 
 /* Do disconnection between PHY and controller without vbus */
@@ -131,8 +140,7 @@ static const struct mxs_phy_data vf610_phy_data = {
 };
 
 static const struct mxs_phy_data imx6sx_phy_data = {
-	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
-		MXS_PHY_NEED_IP_FIX,
+	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
 };
 
 static const struct of_device_id mxs_phy_dt_ids[] = {
@@ -256,6 +264,18 @@ static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect)
 		usleep_range(500, 1000);
 }
 
+static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy)
+{
+	void __iomem *base = mxs_phy->phy.io_priv;
+	u32 phyctrl = readl(base + HW_USBPHY_CTRL);
+
+	if (IS_ENABLED(CONFIG_USB_OTG) &&
+			!(phyctrl & BM_USBPHY_CTRL_OTG_ID_VALUE))
+		return true;
+
+	return false;
+}
+
 static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
 {
 	bool vbus_is_on = false;
@@ -270,7 +290,7 @@ static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
 
 	vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
 
-	if (on && !vbus_is_on)
+	if (on && !vbus_is_on && !mxs_phy_is_otg_host(mxs_phy))
 		__mxs_phy_disconnect_line(mxs_phy, true);
 	else
 		__mxs_phy_disconnect_line(mxs_phy, false);
@@ -293,6 +313,17 @@ static int mxs_phy_init(struct usb_phy *phy)
 static void mxs_phy_shutdown(struct usb_phy *phy)
 {
 	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+	u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
+			BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
+			BM_USBPHY_CTRL_ENIDCHG_WKUP |
+			BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
+			BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
+			BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
+			BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
+			BM_USBPHY_CTRL_ENAUTO_PWRON_PLL;
+
+	writel(value, phy->io_priv + HW_USBPHY_CTRL_CLR);
+	writel(0xffffffff, phy->io_priv + HW_USBPHY_PWD);
 
 	writel(BM_USBPHY_CTRL_CLKGATE,
 	       phy->io_priv + HW_USBPHY_CTRL_SET);
@@ -300,13 +331,56 @@ static void mxs_phy_shutdown(struct usb_phy *phy)
 	clk_disable_unprepare(mxs_phy->clk);
 }
 
+static bool mxs_phy_is_low_speed_connection(struct mxs_phy *mxs_phy)
+{
+	unsigned int line_state;
+	/* bit definition is the same for all controllers */
+	unsigned int dp_bit = BM_ANADIG_USB1_MISC_RX_VPIN_FS,
+		     dm_bit = BM_ANADIG_USB1_MISC_RX_VMIN_FS;
+	unsigned int reg = ANADIG_USB1_MISC;
+
+	/* If the SoCs don't have anatop, quit */
+	if (!mxs_phy->regmap_anatop)
+		return false;
+
+	if (mxs_phy->port_id == 0)
+		reg = ANADIG_USB1_MISC;
+	else if (mxs_phy->port_id == 1)
+		reg = ANADIG_USB2_MISC;
+
+	regmap_read(mxs_phy->regmap_anatop, reg, &line_state);
+
+	if ((line_state & (dp_bit | dm_bit)) ==  dm_bit)
+		return true;
+	else
+		return false;
+}
+
 static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 {
 	int ret;
 	struct mxs_phy *mxs_phy = to_mxs_phy(x);
+	bool low_speed_connection, vbus_is_on;
+
+	low_speed_connection = mxs_phy_is_low_speed_connection(mxs_phy);
+	vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
 
 	if (suspend) {
-		writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
+		/*
+		 * FIXME: Do not power down RXPWD1PT1 bit for low speed
+		 * connect. The low speed connection will have problem at
+		 * very rare cases during usb suspend and resume process.
+		 */
+		if (low_speed_connection & vbus_is_on) {
+			/*
+			 * If value to be set as pwd value is not 0xffffffff,
+			 * several 32Khz cycles are needed.
+			 */
+			mxs_phy_clock_switch_delay();
+			writel(0xffbfffff, x->io_priv + HW_USBPHY_PWD);
+		} else {
+			writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
+		}
 		writel(BM_USBPHY_CTRL_CLKGATE,
 		       x->io_priv + HW_USBPHY_CTRL_SET);
 		clk_disable_unprepare(mxs_phy->clk);
@@ -359,7 +433,9 @@ static int mxs_phy_on_disconnect(struct usb_phy *phy,
 	dev_dbg(phy->dev, "%s device has disconnected\n",
 		(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
 
-	if (speed == USB_SPEED_HIGH)
+	/* Sometimes, the speed is not high speed when the error occurs */
+	if (readl(phy->io_priv + HW_USBPHY_CTRL) &
+			BM_USBPHY_CTRL_ENHOSTDISCONDETECT)
 		writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
 		       phy->io_priv + HW_USBPHY_CTRL_CLR);