usb: phy: remove phy-isp1301-omap driver

With the H2 and H3 board support removed from the driver, there
are actually no other users, so the entire driver can go away.

Link: https://lore.kernel.org/linux-arm-kernel/20221019173437.GB41568@darkstar.musicnaut.iki.fi/
Suggested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3 files changed, 0 insertions, 1568 deletions

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 915df5726a5c..5f629d7cad64 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -28,23 +28,6 @@ config FSL_USB2_OTG
 	help
 	  Enable this to support Freescale USB OTG transceiver.
 
-config ISP1301_OMAP
-	tristate "Philips ISP1301 with OMAP OTG"
-	depends on I2C
-	depends on ARCH_OMAP_OTG || (ARM && COMPILE_TEST)
-	depends on USB
-	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
-	select USB_PHY
-	help
-	  If you say yes here you get support for the Philips ISP1301
-	  USB-On-The-Go transceiver working with the OMAP OTG controller.
-	  The ISP1301 is a full speed USB  transceiver which is used in
-	  products including H2, H3, and H4 development boards for Texas
-	  Instruments OMAP processors.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called phy-isp1301-omap.
-
 config KEYSTONE_USB_PHY
 	tristate "Keystone USB PHY Driver"
 	depends on ARCH_KEYSTONE || COMPILE_TEST
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index df1d99010079..e5d619b4d8f6 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_OF)			+= of.o
 
 obj-$(CONFIG_AB8500_USB)		+= phy-ab8500-usb.o
 obj-$(CONFIG_FSL_USB2_OTG)		+= phy-fsl-usb.o
-obj-$(CONFIG_ISP1301_OMAP)		+= phy-isp1301-omap.o
 obj-$(CONFIG_NOP_USB_XCEIV)		+= phy-generic.o
 obj-$(CONFIG_TAHVO_USB)			+= phy-tahvo.o
 obj-$(CONFIG_AM335X_CONTROL_USB)	+= phy-am335x-control.o
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
deleted file mode 100644
index 57cf9d88814b..000000000000
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ /dev/null
@@ -1,1550 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * isp1301_omap - ISP 1301 USB transceiver, talking to OMAP OTG controller
- *
- * Copyright (C) 2004 Texas Instruments
- * Copyright (C) 2004 David Brownell
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/consumer.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/i2c.h>
-#include <linux/workqueue.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/soc/ti/omap1-mux.h>
-#include <linux/soc/ti/omap1-usb.h>
-#include <linux/soc/ti/omap1-io.h>
-
-#undef VERBOSE
-
-
-#define	DRIVER_VERSION	"24 August 2004"
-#define	DRIVER_NAME	(isp1301_driver.driver.name)
-
-MODULE_DESCRIPTION("ISP1301 USB OTG Transceiver Driver");
-MODULE_LICENSE("GPL");
-
-struct isp1301 {
-	struct usb_phy		phy;
-	struct i2c_client	*client;
-	void			(*i2c_release)(struct device *dev);
-
-	int			irq_type;
-
-	u32			last_otg_ctrl;
-	unsigned		working:1;
-
-	struct timer_list	timer;
-
-	/* use keventd context to change the state for us */
-	struct work_struct	work;
-
-	unsigned long		todo;
-#		define WORK_UPDATE_ISP	0	/* update ISP from OTG */
-#		define WORK_UPDATE_OTG	1	/* update OTG from ISP */
-#		define WORK_HOST_RESUME	4	/* resume host */
-#		define WORK_TIMER	6	/* timer fired */
-#		define WORK_STOP	7	/* don't resubmit */
-};
-
-
-/* bits in OTG_CTRL */
-
-#define	OTG_XCEIV_OUTPUTS \
-	(OTG_ASESSVLD|OTG_BSESSEND|OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID)
-#define	OTG_XCEIV_INPUTS \
-	(OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID)
-#define	OTG_CTRL_BITS \
-	(OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|OTG_B_HNPEN|OTG_BUSDROP)
-	/* and OTG_PULLUP is sometimes written */
-
-#define	OTG_CTRL_MASK	(OTG_DRIVER_SEL| \
-	OTG_XCEIV_OUTPUTS|OTG_XCEIV_INPUTS| \
-	OTG_CTRL_BITS)
-
-
-/*-------------------------------------------------------------------------*/
-
-/* products will deliver OTG messages with LEDs, GUI, etc */
-static inline void notresponding(struct isp1301 *isp)
-{
-	printk(KERN_NOTICE "OTG device not responding.\n");
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static struct i2c_driver isp1301_driver;
-
-/* smbus apis are used for portability */
-
-static inline u8
-isp1301_get_u8(struct isp1301 *isp, u8 reg)
-{
-	return i2c_smbus_read_byte_data(isp->client, reg + 0);
-}
-
-static inline int
-isp1301_get_u16(struct isp1301 *isp, u8 reg)
-{
-	return i2c_smbus_read_word_data(isp->client, reg);
-}
-
-static inline int
-isp1301_set_bits(struct isp1301 *isp, u8 reg, u8 bits)
-{
-	return i2c_smbus_write_byte_data(isp->client, reg + 0, bits);
-}
-
-static inline int
-isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits)
-{
-	return i2c_smbus_write_byte_data(isp->client, reg + 1, bits);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* identification */
-#define	ISP1301_VENDOR_ID		0x00	/* u16 read */
-#define	ISP1301_PRODUCT_ID		0x02	/* u16 read */
-#define	ISP1301_BCD_DEVICE		0x14	/* u16 read */
-
-#define	I2C_VENDOR_ID_PHILIPS		0x04cc
-#define	I2C_PRODUCT_ID_PHILIPS_1301	0x1301
-
-/* operational registers */
-#define	ISP1301_MODE_CONTROL_1		0x04	/* u8 read, set, +1 clear */
-#	define	MC1_SPEED		(1 << 0)
-#	define	MC1_SUSPEND		(1 << 1)
-#	define	MC1_DAT_SE0		(1 << 2)
-#	define	MC1_TRANSPARENT		(1 << 3)
-#	define	MC1_BDIS_ACON_EN	(1 << 4)
-#	define	MC1_OE_INT_EN		(1 << 5)
-#	define	MC1_UART_EN		(1 << 6)
-#	define	MC1_MASK		0x7f
-#define	ISP1301_MODE_CONTROL_2		0x12	/* u8 read, set, +1 clear */
-#	define	MC2_GLOBAL_PWR_DN	(1 << 0)
-#	define	MC2_SPD_SUSP_CTRL	(1 << 1)
-#	define	MC2_BI_DI		(1 << 2)
-#	define	MC2_TRANSP_BDIR0	(1 << 3)
-#	define	MC2_TRANSP_BDIR1	(1 << 4)
-#	define	MC2_AUDIO_EN		(1 << 5)
-#	define	MC2_PSW_EN		(1 << 6)
-#	define	MC2_EN2V7		(1 << 7)
-#define	ISP1301_OTG_CONTROL_1		0x06	/* u8 read, set, +1 clear */
-#	define	OTG1_DP_PULLUP		(1 << 0)
-#	define	OTG1_DM_PULLUP		(1 << 1)
-#	define	OTG1_DP_PULLDOWN	(1 << 2)
-#	define	OTG1_DM_PULLDOWN	(1 << 3)
-#	define	OTG1_ID_PULLDOWN	(1 << 4)
-#	define	OTG1_VBUS_DRV		(1 << 5)
-#	define	OTG1_VBUS_DISCHRG	(1 << 6)
-#	define	OTG1_VBUS_CHRG		(1 << 7)
-#define	ISP1301_OTG_STATUS		0x10	/* u8 readonly */
-#	define	OTG_B_SESS_END		(1 << 6)
-#	define	OTG_B_SESS_VLD		(1 << 7)
-
-#define	ISP1301_INTERRUPT_SOURCE	0x08	/* u8 read */
-#define	ISP1301_INTERRUPT_LATCH		0x0A	/* u8 read, set, +1 clear */
-
-#define	ISP1301_INTERRUPT_FALLING	0x0C	/* u8 read, set, +1 clear */
-#define	ISP1301_INTERRUPT_RISING	0x0E	/* u8 read, set, +1 clear */
-
-/* same bitfields in all interrupt registers */
-#	define	INTR_VBUS_VLD		(1 << 0)
-#	define	INTR_SESS_VLD		(1 << 1)
-#	define	INTR_DP_HI		(1 << 2)
-#	define	INTR_ID_GND		(1 << 3)
-#	define	INTR_DM_HI		(1 << 4)
-#	define	INTR_ID_FLOAT		(1 << 5)
-#	define	INTR_BDIS_ACON		(1 << 6)
-#	define	INTR_CR_INT		(1 << 7)
-
-/*-------------------------------------------------------------------------*/
-
-static inline const char *state_name(struct isp1301 *isp)
-{
-	return usb_otg_state_string(isp->phy.otg->state);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* NOTE:  some of this ISP1301 setup is specific to H2 boards;
- * not everything is guarded by board-specific checks, or even using
- * omap_usb_config data to deduce MC1_DAT_SE0 and MC2_BI_DI.
- *
- * ALSO:  this currently doesn't use ISP1301 low-power modes
- * while OTG is running.
- */
-
-static void power_down(struct isp1301 *isp)
-{
-	isp->phy.otg->state = OTG_STATE_UNDEFINED;
-
-	// isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
-	isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND);
-
-	isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_ID_PULLDOWN);
-	isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
-}
-
-static void __maybe_unused power_up(struct isp1301 *isp)
-{
-	// isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
-	isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND);
-
-	/* do this only when cpu is driving transceiver,
-	 * so host won't see a low speed device...
-	 */
-	isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
-}
-
-#define	NO_HOST_SUSPEND
-
-static int host_suspend(struct isp1301 *isp)
-{
-#ifdef	NO_HOST_SUSPEND
-	return 0;
-#else
-	struct device	*dev;
-
-	if (!isp->phy.otg->host)
-		return -ENODEV;
-
-	/* Currently ASSUMES only the OTG port matters;
-	 * other ports could be active...
-	 */
-	dev = isp->phy.otg->host->controller;
-	return dev->driver->suspend(dev, 3, 0);
-#endif
-}
-
-static int host_resume(struct isp1301 *isp)
-{
-#ifdef	NO_HOST_SUSPEND
-	return 0;
-#else
-	struct device	*dev;
-
-	if (!isp->phy.otg->host)
-		return -ENODEV;
-
-	dev = isp->phy.otg->host->controller;
-	return dev->driver->resume(dev, 0);
-#endif
-}
-
-static int gadget_suspend(struct isp1301 *isp)
-{
-	isp->phy.otg->gadget->b_hnp_enable = 0;
-	isp->phy.otg->gadget->a_hnp_support = 0;
-	isp->phy.otg->gadget->a_alt_hnp_support = 0;
-	return usb_gadget_vbus_disconnect(isp->phy.otg->gadget);
-}
-
-/*-------------------------------------------------------------------------*/
-
-#define	TIMER_MINUTES	10
-#define	TIMER_JIFFIES	(TIMER_MINUTES * 60 * HZ)
-
-/* Almost all our I2C messaging comes from a work queue's task context.
- * NOTE: guaranteeing certain response times might mean we shouldn't
- * share keventd's work queue; a realtime task might be safest.
- */
-static void isp1301_defer_work(struct isp1301 *isp, int work)
-{
-	int status;
-
-	if (isp && !test_and_set_bit(work, &isp->todo)) {
-		(void) get_device(&isp->client->dev);
-		status = schedule_work(&isp->work);
-		if (!status && !isp->working)
-			dev_vdbg(&isp->client->dev,
-				"work item %d may be lost\n", work);
-	}
-}
-
-/* called from irq handlers */
-static void a_idle(struct isp1301 *isp, const char *tag)
-{
-	u32 l;
-
-	if (isp->phy.otg->state == OTG_STATE_A_IDLE)
-		return;
-
-	isp->phy.otg->default_a = 1;
-	if (isp->phy.otg->host) {
-		isp->phy.otg->host->is_b_host = 0;
-		host_suspend(isp);
-	}
-	if (isp->phy.otg->gadget) {
-		isp->phy.otg->gadget->is_a_peripheral = 1;
-		gadget_suspend(isp);
-	}
-	isp->phy.otg->state = OTG_STATE_A_IDLE;
-	l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
-	omap_writel(l, OTG_CTRL);
-	isp->last_otg_ctrl = l;
-	pr_debug("  --> %s/%s\n", state_name(isp), tag);
-}
-
-/* called from irq handlers */
-static void b_idle(struct isp1301 *isp, const char *tag)
-{
-	u32 l;
-
-	if (isp->phy.otg->state == OTG_STATE_B_IDLE)
-		return;
-
-	isp->phy.otg->default_a = 0;
-	if (isp->phy.otg->host) {
-		isp->phy.otg->host->is_b_host = 1;
-		host_suspend(isp);
-	}
-	if (isp->phy.otg->gadget) {
-		isp->phy.otg->gadget->is_a_peripheral = 0;
-		gadget_suspend(isp);
-	}
-	isp->phy.otg->state = OTG_STATE_B_IDLE;
-	l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
-	omap_writel(l, OTG_CTRL);
-	isp->last_otg_ctrl = l;
-	pr_debug("  --> %s/%s\n", state_name(isp), tag);
-}
-
-static void
-dump_regs(struct isp1301 *isp, const char *label)
-{
-	u8	ctrl = isp1301_get_u8(isp, ISP1301_OTG_CONTROL_1);
-	u8	status = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
-	u8	src = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
-
-	pr_debug("otg: %06x, %s %s, otg/%02x stat/%02x.%02x\n",
-		omap_readl(OTG_CTRL), label, state_name(isp),
-		ctrl, status, src);
-	/* mode control and irq enables don't change much */
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef	CONFIG_USB_OTG
-
-/*
- * The OMAP OTG controller handles most of the OTG state transitions.
- *
- * We translate isp1301 outputs (mostly voltage comparator status) into
- * OTG inputs; OTG outputs (mostly pullup/pulldown controls) and HNP state
- * flags into isp1301 inputs ... and infer state transitions.
- */
-
-#ifdef	VERBOSE
-
-static void check_state(struct isp1301 *isp, const char *tag)
-{
-	enum usb_otg_state	state = OTG_STATE_UNDEFINED;
-	u8			fsm = omap_readw(OTG_TEST) & 0x0ff;
-	unsigned		extra = 0;
-
-	switch (fsm) {
-
-	/* default-b */
-	case 0x0:
-		state = OTG_STATE_B_IDLE;
-		break;
-	case 0x3:
-	case 0x7:
-		extra = 1;
-	case 0x1:
-		state = OTG_STATE_B_PERIPHERAL;
-		break;
-	case 0x11:
-		state = OTG_STATE_B_SRP_INIT;
-		break;
-
-	/* extra dual-role default-b states */
-	case 0x12:
-	case 0x13:
-	case 0x16:
-		extra = 1;
-	case 0x17:
-		state = OTG_STATE_B_WAIT_ACON;
-		break;
-	case 0x34:
-		state = OTG_STATE_B_HOST;
-		break;
-
-	/* default-a */
-	case 0x36:
-		state = OTG_STATE_A_IDLE;
-		break;
-	case 0x3c:
-		state = OTG_STATE_A_WAIT_VFALL;
-		break;
-	case 0x7d:
-		state = OTG_STATE_A_VBUS_ERR;
-		break;
-	case 0x9e:
-	case 0x9f:
-		extra = 1;
-	case 0x89:
-		state = OTG_STATE_A_PERIPHERAL;
-		break;
-	case 0xb7:
-		state = OTG_STATE_A_WAIT_VRISE;
-		break;
-	case 0xb8:
-		state = OTG_STATE_A_WAIT_BCON;
-		break;
-	case 0xb9:
-		state = OTG_STATE_A_HOST;
-		break;
-	case 0xba:
-		state = OTG_STATE_A_SUSPEND;
-		break;
-	default:
-		break;
-	}
-	if (isp->phy.otg->state == state && !extra)
-		return;
-	pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag,
-		usb_otg_state_string(state), fsm, state_name(isp),
-		omap_readl(OTG_CTRL));
-}
-
-#else
-
-static inline void check_state(struct isp1301 *isp, const char *tag) { }
-
-#endif
-
-/* outputs from ISP1301_INTERRUPT_SOURCE */
-static void update_otg1(struct isp1301 *isp, u8 int_src)
-{
-	u32	otg_ctrl;
-
-	otg_ctrl = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
-	otg_ctrl &= ~OTG_XCEIV_INPUTS;
-	otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD);
-
-	if (int_src & INTR_SESS_VLD)
-		otg_ctrl |= OTG_ASESSVLD;
-	else if (isp->phy.otg->state == OTG_STATE_A_WAIT_VFALL) {
-		a_idle(isp, "vfall");
-		otg_ctrl &= ~OTG_CTRL_BITS;
-	}
-	if (int_src & INTR_VBUS_VLD)
-		otg_ctrl |= OTG_VBUSVLD;
-	if (int_src & INTR_ID_GND) {		/* default-A */
-		if (isp->phy.otg->state == OTG_STATE_B_IDLE
-				|| isp->phy.otg->state
-					== OTG_STATE_UNDEFINED) {
-			a_idle(isp, "init");
-			return;
-		}
-	} else {				/* default-B */
-		otg_ctrl |= OTG_ID;
-		if (isp->phy.otg->state == OTG_STATE_A_IDLE
-			|| isp->phy.otg->state == OTG_STATE_UNDEFINED) {
-			b_idle(isp, "init");
-			return;
-		}
-	}
-	omap_writel(otg_ctrl, OTG_CTRL);
-}
-
-/* outputs from ISP1301_OTG_STATUS */
-static void update_otg2(struct isp1301 *isp, u8 otg_status)
-{
-	u32	otg_ctrl;
-
-	otg_ctrl = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
-	otg_ctrl &= ~OTG_XCEIV_INPUTS;
-	otg_ctrl &= ~(OTG_BSESSVLD | OTG_BSESSEND);
-	if (otg_status & OTG_B_SESS_VLD)
-		otg_ctrl |= OTG_BSESSVLD;
-	else if (otg_status & OTG_B_SESS_END)
-		otg_ctrl |= OTG_BSESSEND;
-	omap_writel(otg_ctrl, OTG_CTRL);
-}
-
-/* inputs going to ISP1301 */
-static void otg_update_isp(struct isp1301 *isp)
-{
-	u32	otg_ctrl, otg_change;
-	u8	set = OTG1_DM_PULLDOWN, clr = OTG1_DM_PULLUP;
-
-	otg_ctrl = omap_readl(OTG_CTRL);
-	otg_change = otg_ctrl ^ isp->last_otg_ctrl;
-	isp->last_otg_ctrl = otg_ctrl;
-	otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS;
-
-	switch (isp->phy.otg->state) {
-	case OTG_STATE_B_IDLE:
-	case OTG_STATE_B_PERIPHERAL:
-	case OTG_STATE_B_SRP_INIT:
-		if (!(otg_ctrl & OTG_PULLUP)) {
-			// if (otg_ctrl & OTG_B_HNPEN) {
-			if (isp->phy.otg->gadget->b_hnp_enable) {
-				isp->phy.otg->state = OTG_STATE_B_WAIT_ACON;
-				pr_debug("  --> b_wait_acon\n");
-			}
-			goto pulldown;
-		}
-pullup:
-		set |= OTG1_DP_PULLUP;
-		clr |= OTG1_DP_PULLDOWN;
-		break;
-	case OTG_STATE_A_SUSPEND:
-	case OTG_STATE_A_PERIPHERAL:
-		if (otg_ctrl & OTG_PULLUP)
-			goto pullup;
-		fallthrough;
-	// case OTG_STATE_B_WAIT_ACON:
-	default:
-pulldown:
-		set |= OTG1_DP_PULLDOWN;
-		clr |= OTG1_DP_PULLUP;
-		break;
-	}
-
-#	define toggle(OTG,ISP) do { \
-		if (otg_ctrl & OTG) set |= ISP; \
-		else clr |= ISP; \
-		} while (0)
-
-	if (!(isp->phy.otg->host))
-		otg_ctrl &= ~OTG_DRV_VBUS;
-
-	switch (isp->phy.otg->state) {
-	case OTG_STATE_A_SUSPEND:
-		if (otg_ctrl & OTG_DRV_VBUS) {
-			set |= OTG1_VBUS_DRV;
-			break;
-		}
-		/* HNP failed for some reason (A_AIDL_BDIS timeout) */
-		notresponding(isp);
-
-		fallthrough;
-	case OTG_STATE_A_VBUS_ERR:
-		isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
-		pr_debug("  --> a_wait_vfall\n");
-		fallthrough;
-	case OTG_STATE_A_WAIT_VFALL:
-		/* FIXME usbcore thinks port power is still on ... */
-		clr |= OTG1_VBUS_DRV;
-		break;
-	case OTG_STATE_A_IDLE:
-		if (otg_ctrl & OTG_DRV_VBUS) {
-			isp->phy.otg->state = OTG_STATE_A_WAIT_VRISE;
-			pr_debug("  --> a_wait_vrise\n");
-		}
-		fallthrough;
-	default:
-		toggle(OTG_DRV_VBUS, OTG1_VBUS_DRV);
-	}
-
-	toggle(OTG_PU_VBUS, OTG1_VBUS_CHRG);
-	toggle(OTG_PD_VBUS, OTG1_VBUS_DISCHRG);
-
-#	undef toggle
-
-	isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, set);
-	isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, clr);
-
-	/* HNP switch to host or peripheral; and SRP */
-	if (otg_change & OTG_PULLUP) {
-		u32 l;
-
-		switch (isp->phy.otg->state) {
-		case OTG_STATE_B_IDLE:
-			if (clr & OTG1_DP_PULLUP)
-				break;
-			isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
-			pr_debug("  --> b_peripheral\n");
-			break;
-		case OTG_STATE_A_SUSPEND:
-			if (clr & OTG1_DP_PULLUP)
-				break;
-			isp->phy.otg->state = OTG_STATE_A_PERIPHERAL;
-			pr_debug("  --> a_peripheral\n");
-			break;
-		default:
-			break;
-		}
-		l = omap_readl(OTG_CTRL);
-		l |= OTG_PULLUP;
-		omap_writel(l, OTG_CTRL);
-	}
-
-	check_state(isp, __func__);
-	dump_regs(isp, "otg->isp1301");
-}
-
-static irqreturn_t omap_otg_irq(int irq, void *_isp)
-{
-	u16		otg_irq = omap_readw(OTG_IRQ_SRC);
-	u32		otg_ctrl;
-	int		ret = IRQ_NONE;
-	struct isp1301	*isp = _isp;
-	struct usb_otg	*otg = isp->phy.otg;
-
-	/* update ISP1301 transceiver from OTG controller */
-	if (otg_irq & OPRT_CHG) {
-		omap_writew(OPRT_CHG, OTG_IRQ_SRC);
-		isp1301_defer_work(isp, WORK_UPDATE_ISP);
-		ret = IRQ_HANDLED;
-
-	/* SRP to become b_peripheral failed */
-	} else if (otg_irq & B_SRP_TMROUT) {
-		pr_debug("otg: B_SRP_TIMEOUT, %06x\n", omap_readl(OTG_CTRL));
-		notresponding(isp);
-
-		/* gadget drivers that care should monitor all kinds of
-		 * remote wakeup (SRP, normal) using their own timer
-		 * to give "check cable and A-device" messages.
-		 */
-		if (isp->phy.otg->state == OTG_STATE_B_SRP_INIT)
-			b_idle(isp, "srp_timeout");
-
-		omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC);
-		ret = IRQ_HANDLED;
-
-	/* HNP to become b_host failed */
-	} else if (otg_irq & B_HNP_FAIL) {
-		pr_debug("otg: %s B_HNP_FAIL, %06x\n",
-				state_name(isp), omap_readl(OTG_CTRL));
-		notresponding(isp);
-
-		otg_ctrl = omap_readl(OTG_CTRL);
-		otg_ctrl |= OTG_BUSDROP;
-		otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
-		omap_writel(otg_ctrl, OTG_CTRL);
-
-		/* subset of b_peripheral()... */
-		isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
-		pr_debug("  --> b_peripheral\n");
-
-		omap_writew(B_HNP_FAIL, OTG_IRQ_SRC);
-		ret = IRQ_HANDLED;
-
-	/* detect SRP from B-device ... */
-	} else if (otg_irq & A_SRP_DETECT) {
-		pr_debug("otg: %s SRP_DETECT, %06x\n",
-				state_name(isp), omap_readl(OTG_CTRL));
-
-		isp1301_defer_work(isp, WORK_UPDATE_OTG);
-		switch (isp->phy.otg->state) {
-		case OTG_STATE_A_IDLE:
-			if (!otg->host)
-				break;
-			isp1301_defer_work(isp, WORK_HOST_RESUME);
-			otg_ctrl = omap_readl(OTG_CTRL);
-			otg_ctrl |= OTG_A_BUSREQ;
-			otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ)
-					& ~OTG_XCEIV_INPUTS
-					& OTG_CTRL_MASK;
-			omap_writel(otg_ctrl, OTG_CTRL);
-			break;
-		default:
-			break;
-		}
-
-		omap_writew(A_SRP_DETECT, OTG_IRQ_SRC);
-		ret = IRQ_HANDLED;
-
-	/* timer expired:  T(a_wait_bcon) and maybe T(a_wait_vrise)
-	 * we don't track them separately
-	 */
-	} else if (otg_irq & A_REQ_TMROUT) {
-		otg_ctrl = omap_readl(OTG_CTRL);
-		pr_info("otg: BCON_TMOUT from %s, %06x\n",
-				state_name(isp), otg_ctrl);
-		notresponding(isp);
-
-		otg_ctrl |= OTG_BUSDROP;
-		otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
-		omap_writel(otg_ctrl, OTG_CTRL);
-		isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
-
-		omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC);
-		ret = IRQ_HANDLED;
-
-	/* A-supplied voltage fell too low; overcurrent */
-	} else if (otg_irq & A_VBUS_ERR) {
-		otg_ctrl = omap_readl(OTG_CTRL);
-		printk(KERN_ERR "otg: %s, VBUS_ERR %04x ctrl %06x\n",
-			state_name(isp), otg_irq, otg_ctrl);
-
-		otg_ctrl |= OTG_BUSDROP;
-		otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
-		omap_writel(otg_ctrl, OTG_CTRL);
-		isp->phy.otg->state = OTG_STATE_A_VBUS_ERR;
-
-		omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
-		ret = IRQ_HANDLED;
-
-	/* switch driver; the transceiver code activates it,
-	 * ungating the udc clock or resuming OHCI.
-	 */
-	} else if (otg_irq & DRIVER_SWITCH) {
-		int	kick = 0;
-
-		otg_ctrl = omap_readl(OTG_CTRL);
-		printk(KERN_NOTICE "otg: %s, SWITCH to %s, ctrl %06x\n",
-				state_name(isp),
-				(otg_ctrl & OTG_DRIVER_SEL)
-					? "gadget" : "host",
-				otg_ctrl);
-		isp1301_defer_work(isp, WORK_UPDATE_ISP);
-
-		/* role is peripheral */
-		if (otg_ctrl & OTG_DRIVER_SEL) {
-			switch (isp->phy.otg->state) {
-			case OTG_STATE_A_IDLE:
-				b_idle(isp, __func__);
-				break;
-			default:
-				break;
-			}
-			isp1301_defer_work(isp, WORK_UPDATE_ISP);
-
-		/* role is host */
-		} else {
-			if (!(otg_ctrl & OTG_ID)) {
-				otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
-				omap_writel(otg_ctrl | OTG_A_BUSREQ, OTG_CTRL);
-			}
-
-			if (otg->host) {
-				switch (isp->phy.otg->state) {
-				case OTG_STATE_B_WAIT_ACON:
-					isp->phy.otg->state = OTG_STATE_B_HOST;
-					pr_debug("  --> b_host\n");
-					kick = 1;
-					break;
-				case OTG_STATE_A_WAIT_BCON:
-					isp->phy.otg->state = OTG_STATE_A_HOST;
-					pr_debug("  --> a_host\n");
-					break;
-				case OTG_STATE_A_PERIPHERAL:
-					isp->phy.otg->state = OTG_STATE_A_WAIT_BCON;
-					pr_debug("  --> a_wait_bcon\n");
-					break;
-				default:
-					break;
-				}
-				isp1301_defer_work(isp, WORK_HOST_RESUME);
-			}
-		}
-
-		omap_writew(DRIVER_SWITCH, OTG_IRQ_SRC);
-		ret = IRQ_HANDLED;
-
-		if (kick)
-			usb_bus_start_enum(otg->host, otg->host->otg_port);
-	}
-
-	check_state(isp, __func__);
-	return ret;
-}
-
-static struct platform_device *otg_dev;
-
-static int isp1301_otg_init(struct isp1301 *isp)
-{
-	u32 l;
-
-	if (!otg_dev)
-		return -ENODEV;
-
-	dump_regs(isp, __func__);
-	/* some of these values are board-specific... */
-	l = omap_readl(OTG_SYSCON_2);
-	l |= OTG_EN
-		/* for B-device: */
-		| SRP_GPDATA		/* 9msec Bdev D+ pulse */
-		| SRP_GPDVBUS		/* discharge after VBUS pulse */
-		// | (3 << 24)		/* 2msec VBUS pulse */
-		/* for A-device: */
-		| (0 << 20)		/* 200ms nominal A_WAIT_VRISE timer */
-		| SRP_DPW		/* detect 167+ns SRP pulses */
-		| SRP_DATA | SRP_VBUS	/* accept both kinds of SRP pulse */
-		;
-	omap_writel(l, OTG_SYSCON_2);
-
-	update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE));
-	update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS));
-
-	check_state(isp, __func__);
-	pr_debug("otg: %s, %s %06x\n",
-			state_name(isp), __func__, omap_readl(OTG_CTRL));
-
-	omap_writew(DRIVER_SWITCH | OPRT_CHG
-			| B_SRP_TMROUT | B_HNP_FAIL
-			| A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT, OTG_IRQ_EN);
-
-	l = omap_readl(OTG_SYSCON_2);
-	l |= OTG_EN;
-	omap_writel(l, OTG_SYSCON_2);
-
-	return 0;
-}
-
-static int otg_probe(struct platform_device *dev)
-{
-	// struct omap_usb_config *config = dev->platform_data;
-
-	otg_dev = dev;
-	return 0;
-}
-
-static int otg_remove(struct platform_device *dev)
-{
-	otg_dev = NULL;
-	return 0;
-}
-
-static struct platform_driver omap_otg_driver = {
-	.probe		= otg_probe,
-	.remove		= otg_remove,
-	.driver		= {
-		.name	= "omap_otg",
-	},
-};
-
-static int otg_bind(struct isp1301 *isp)
-{
-	int	status;
-
-	if (otg_dev)
-		return -EBUSY;
-
-	status = platform_driver_register(&omap_otg_driver);
-	if (status < 0)
-		return status;
-
-	if (otg_dev)
-		status = request_irq(otg_dev->resource[1].start, omap_otg_irq,
-				0, DRIVER_NAME, isp);
-	else
-		status = -ENODEV;
-
-	if (status < 0)
-		platform_driver_unregister(&omap_otg_driver);
-	return status;
-}
-
-static void otg_unbind(struct isp1301 *isp)
-{
-	if (!otg_dev)
-		return;
-	free_irq(otg_dev->resource[1].start, isp);
-}
-
-#else
-
-/* OTG controller isn't clocked */
-
-#endif	/* CONFIG_USB_OTG */
-
-/*-------------------------------------------------------------------------*/
-
-static void b_peripheral(struct isp1301 *isp)
-{
-	u32 l;
-
-	l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
-	omap_writel(l, OTG_CTRL);
-
-	usb_gadget_vbus_connect(isp->phy.otg->gadget);
-
-#ifdef	CONFIG_USB_OTG
-	otg_update_isp(isp);
-#else
-	/* UDC driver just set OTG_BSESSVLD */
-	isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLUP);
-	isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLDOWN);
-	isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
-	pr_debug("  --> b_peripheral\n");
-	dump_regs(isp, "2periph");
-#endif
-}
-
-static void isp_update_otg(struct isp1301 *isp, u8 stat)
-{
-	struct usb_otg		*otg = isp->phy.otg;
-	u8			isp_stat, isp_bstat;
-	enum usb_otg_state	state = isp->phy.otg->state;
-
-	if (stat & INTR_BDIS_ACON)
-		pr_debug("OTG:  BDIS_ACON, %s\n", state_name(isp));
-
-	/* start certain state transitions right away */
-	isp_stat = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
-	if (isp_stat & INTR_ID_GND) {
-		if (otg->default_a) {
-			switch (state) {
-			case OTG_STATE_B_IDLE:
-				a_idle(isp, "idle");
-				fallthrough;
-			case OTG_STATE_A_IDLE:
-				fallthrough;
-			case OTG_STATE_A_WAIT_VRISE:
-				/* we skip over OTG_STATE_A_WAIT_BCON, since
-				 * the HC will transition to A_HOST (or
-				 * A_SUSPEND!) without our noticing except
-				 * when HNP is used.
-				 */
-				if (isp_stat & INTR_VBUS_VLD)
-					isp->phy.otg->state = OTG_STATE_A_HOST;
-				break;
-			case OTG_STATE_A_WAIT_VFALL:
-				if (!(isp_stat & INTR_SESS_VLD))
-					a_idle(isp, "vfell");
-				break;
-			default:
-				if (!(isp_stat & INTR_VBUS_VLD))
-					isp->phy.otg->state = OTG_STATE_A_VBUS_ERR;
-				break;
-			}
-			isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
-		} else {
-			switch (state) {
-			case OTG_STATE_B_PERIPHERAL:
-			case OTG_STATE_B_HOST:
-			case OTG_STATE_B_WAIT_ACON:
-				usb_gadget_vbus_disconnect(otg->gadget);
-				break;
-			default:
-				break;
-			}
-			if (state != OTG_STATE_A_IDLE)
-				a_idle(isp, "id");
-			if (otg->host && state == OTG_STATE_A_IDLE)
-				isp1301_defer_work(isp, WORK_HOST_RESUME);
-			isp_bstat = 0;
-		}
-	} else {
-		u32 l;
-
-		/* if user unplugged mini-A end of cable,
-		 * don't bypass A_WAIT_VFALL.
-		 */
-		if (otg->default_a) {
-			switch (state) {
-			default:
-				isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
-				break;
-			case OTG_STATE_A_WAIT_VFALL:
-				state = OTG_STATE_A_IDLE;
-				/* hub_wq may take a while to notice and
-				 * handle this disconnect, so don't go
-				 * to B_IDLE quite yet.
-				 */
-				break;
-			case OTG_STATE_A_IDLE:
-				host_suspend(isp);
-				isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1,
-						MC1_BDIS_ACON_EN);
-				isp->phy.otg->state = OTG_STATE_B_IDLE;
-				l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
-				l &= ~OTG_CTRL_BITS;
-				omap_writel(l, OTG_CTRL);
-				break;
-			case OTG_STATE_B_IDLE:
-				break;
-			}
-		}
-		isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
-
-		switch (isp->phy.otg->state) {
-		case OTG_STATE_B_PERIPHERAL:
-		case OTG_STATE_B_WAIT_ACON:
-		case OTG_STATE_B_HOST:
-			if (likely(isp_bstat & OTG_B_SESS_VLD))
-				break;
-#ifndef	CONFIG_USB_OTG
-			/* UDC driver will clear OTG_BSESSVLD */
-			isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1,
-						OTG1_DP_PULLDOWN);
-			isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1,
-						OTG1_DP_PULLUP);
-			dump_regs(isp, __func__);
-#endif
-			fallthrough;
-		case OTG_STATE_B_SRP_INIT:
-			b_idle(isp, __func__);
-			l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
-			omap_writel(l, OTG_CTRL);
-			fallthrough;
-		case OTG_STATE_B_IDLE:
-			if (otg->gadget && (isp_bstat & OTG_B_SESS_VLD)) {
-#ifdef	CONFIG_USB_OTG
-				update_otg1(isp, isp_stat);
-				update_otg2(isp, isp_bstat);
-#endif
-				b_peripheral(isp);
-			} else if (!(isp_stat & (INTR_VBUS_VLD|INTR_SESS_VLD)))
-				isp_bstat |= OTG_B_SESS_END;
-			break;
-		case OTG_STATE_A_WAIT_VFALL:
-			break;
-		default:
-			pr_debug("otg: unsupported b-device %s\n",
-				state_name(isp));
-			break;
-		}
-	}
-
-	if (state != isp->phy.otg->state)
-		pr_debug("  isp, %s -> %s\n",
-				usb_otg_state_string(state), state_name(isp));
-
-#ifdef	CONFIG_USB_OTG
-	/* update the OTG controller state to match the isp1301; may
-	 * trigger OPRT_CHG irqs for changes going to the isp1301.
-	 */
-	update_otg1(isp, isp_stat);
-	update_otg2(isp, isp_bstat);
-	check_state(isp, __func__);
-#endif
-
-	dump_regs(isp, "isp1301->otg");
-}
-
-/*-------------------------------------------------------------------------*/
-
-static u8 isp1301_clear_latch(struct isp1301 *isp)
-{
-	u8 latch = isp1301_get_u8(isp, ISP1301_INTERRUPT_LATCH);
-	isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, latch);
-	return latch;
-}
-
-static void
-isp1301_work(struct work_struct *work)
-{
-	struct isp1301	*isp = container_of(work, struct isp1301, work);
-	int		stop;
-
-	/* implicit lock:  we're the only task using this device */
-	isp->working = 1;
-	do {
-		stop = test_bit(WORK_STOP, &isp->todo);
-
-#ifdef	CONFIG_USB_OTG
-		/* transfer state from otg engine to isp1301 */
-		if (test_and_clear_bit(WORK_UPDATE_ISP, &isp->todo)) {
-			otg_update_isp(isp);
-			put_device(&isp->client->dev);
-		}
-#endif
-		/* transfer state from isp1301 to otg engine */
-		if (test_and_clear_bit(WORK_UPDATE_OTG, &isp->todo)) {
-			u8		stat = isp1301_clear_latch(isp);
-
-			isp_update_otg(isp, stat);
-			put_device(&isp->client->dev);
-		}
-
-		if (test_and_clear_bit(WORK_HOST_RESUME, &isp->todo)) {
-			u32	otg_ctrl;
-
-			/*
-			 * skip A_WAIT_VRISE; hc transitions invisibly
-			 * skip A_WAIT_BCON; same.
-			 */
-			switch (isp->phy.otg->state) {
-			case OTG_STATE_A_WAIT_BCON:
-			case OTG_STATE_A_WAIT_VRISE:
-				isp->phy.otg->state = OTG_STATE_A_HOST;
-				pr_debug("  --> a_host\n");
-				otg_ctrl = omap_readl(OTG_CTRL);
-				otg_ctrl |= OTG_A_BUSREQ;
-				otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ)
-						& OTG_CTRL_MASK;
-				omap_writel(otg_ctrl, OTG_CTRL);
-				break;
-			case OTG_STATE_B_WAIT_ACON:
-				isp->phy.otg->state = OTG_STATE_B_HOST;
-				pr_debug("  --> b_host (acon)\n");
-				break;
-			case OTG_STATE_B_HOST:
-			case OTG_STATE_B_IDLE:
-			case OTG_STATE_A_IDLE:
-				break;
-			default:
-				pr_debug("  host resume in %s\n",
-						state_name(isp));
-			}
-			host_resume(isp);
-			// mdelay(10);
-			put_device(&isp->client->dev);
-		}
-
-		if (test_and_clear_bit(WORK_TIMER, &isp->todo)) {
-#ifdef	VERBOSE
-			dump_regs(isp, "timer");
-			if (!stop)
-				mod_timer(&isp->timer, jiffies + TIMER_JIFFIES);
-#endif
-			put_device(&isp->client->dev);
-		}
-
-		if (isp->todo)
-			dev_vdbg(&isp->client->dev,
-				"work done, todo = 0x%lx\n",
-				isp->todo);
-		if (stop) {
-			dev_dbg(&isp->client->dev, "stop\n");
-			break;
-		}
-	} while (isp->todo);
-	isp->working = 0;
-}
-
-static irqreturn_t isp1301_irq(int irq, void *isp)
-{
-	isp1301_defer_work(isp, WORK_UPDATE_OTG);
-	return IRQ_HANDLED;
-}
-
-static void isp1301_timer(struct timer_list *t)
-{
-	struct isp1301 *isp = from_timer(isp, t, timer);
-
-	isp1301_defer_work(isp, WORK_TIMER);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void isp1301_release(struct device *dev)
-{
-	struct isp1301	*isp;
-
-	isp = dev_get_drvdata(dev);
-
-	/* FIXME -- not with a "new style" driver, it doesn't!! */
-
-	/* ugly -- i2c hijacks our memory hook to wait_for_completion() */
-	if (isp->i2c_release)
-		isp->i2c_release(dev);
-	kfree(isp->phy.otg);
-	kfree (isp);
-}
-
-static struct isp1301 *the_transceiver;
-
-static void isp1301_remove(struct i2c_client *i2c)
-{
-	struct isp1301	*isp;
-
-	isp = i2c_get_clientdata(i2c);
-
-	isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0);
-	isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0);
-	free_irq(i2c->irq, isp);
-#ifdef	CONFIG_USB_OTG
-	otg_unbind(isp);
-#endif
-	set_bit(WORK_STOP, &isp->todo);
-	del_timer_sync(&isp->timer);
-	flush_work(&isp->work);
-
-	put_device(&i2c->dev);
-	the_transceiver = NULL;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* NOTE:  three modes are possible here, only one of which
- * will be standards-conformant on any given system:
- *
- *  - OTG mode (dual-role), required if there's a Mini-AB connector
- *  - HOST mode, for when there's one or more A (host) connectors
- *  - DEVICE mode, for when there's a B/Mini-B (device) connector
- *
- * As a rule, you won't have an isp1301 chip unless it's there to
- * support the OTG mode.  Other modes help testing USB controllers
- * in isolation from (full) OTG support, or maybe so later board
- * revisions can help to support those feature.
- */
-
-#ifdef	CONFIG_USB_OTG
-
-static int isp1301_otg_enable(struct isp1301 *isp)
-{
-	power_up(isp);
-	isp1301_otg_init(isp);
-
-	/* NOTE:  since we don't change this, this provides
-	 * a few more interrupts than are strictly needed.
-	 */
-	isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
-		INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
-	isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
-		INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
-
-	dev_info(&isp->client->dev, "ready for dual-role USB ...\n");
-
-	return 0;
-}
-
-#endif
-
-/* add or disable the host device+driver */
-static int
-isp1301_set_host(struct usb_otg *otg, struct usb_bus *host)
-{
-	struct isp1301	*isp = container_of(otg->usb_phy, struct isp1301, phy);
-
-	if (isp != the_transceiver)
-		return -ENODEV;
-
-	if (!host) {
-		omap_writew(0, OTG_IRQ_EN);
-		power_down(isp);
-		otg->host = NULL;
-		return 0;
-	}
-
-#ifdef	CONFIG_USB_OTG
-	otg->host = host;
-	dev_dbg(&isp->client->dev, "registered host\n");
-	host_suspend(isp);
-	if (otg->gadget)
-		return isp1301_otg_enable(isp);
-	return 0;
-
-#elif !IS_ENABLED(CONFIG_USB_OMAP)
-	// FIXME update its refcount
-	otg->host = host;
-
-	power_up(isp);
-
-	dev_info(&isp->client->dev, "A-Host sessions ok\n");
-	isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
-		INTR_ID_GND);
-	isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
-		INTR_ID_GND);
-
-	/* If this has a Mini-AB connector, this mode is highly
-	 * nonstandard ... but can be handy for testing, especially with
-	 * the Mini-A end of an OTG cable.  (Or something nonstandard
-	 * like MiniB-to-StandardB, maybe built with a gender mender.)
-	 */
-	isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_VBUS_DRV);
-
-	dump_regs(isp, __func__);
-
-	return 0;
-
-#else
-	dev_dbg(&isp->client->dev, "host sessions not allowed\n");
-	return -EINVAL;
-#endif
-
-}
-
-static int
-isp1301_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
-{
-	struct isp1301	*isp = container_of(otg->usb_phy, struct isp1301, phy);
-
-	if (isp != the_transceiver)
-		return -ENODEV;
-
-	if (!gadget) {
-		omap_writew(0, OTG_IRQ_EN);
-		usb_gadget_vbus_disconnect(otg->gadget);
-		otg->gadget = NULL;
-		power_down(isp);
-		return 0;
-	}
-
-#ifdef	CONFIG_USB_OTG
-	otg->gadget = gadget;
-	dev_dbg(&isp->client->dev, "registered gadget\n");
-	/* gadget driver may be suspended until vbus_connect () */
-	if (otg->host)
-		return isp1301_otg_enable(isp);
-	return 0;
-
-#elif	!defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OHCI_HCD_MODULE)
-	otg->gadget = gadget;
-	// FIXME update its refcount
-
-	{
-		u32 l;
-
-		l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
-		l &= ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS);
-		l |= OTG_ID;
-		omap_writel(l, OTG_CTRL);
-	}
-
-	power_up(isp);
-	isp->phy.otg->state = OTG_STATE_B_IDLE;
-
-	isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
-		INTR_SESS_VLD);
-	isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
-		INTR_VBUS_VLD);
-	dev_info(&isp->client->dev, "B-Peripheral sessions ok\n");
-	dump_regs(isp, __func__);
-
-	/* If this has a Mini-AB connector, this mode is highly
-	 * nonstandard ... but can be handy for testing, so long
-	 * as you don't plug a Mini-A cable into the jack.
-	 */
-	if (isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE) & INTR_VBUS_VLD)
-		b_peripheral(isp);
-
-	return 0;
-
-#else
-	dev_dbg(&isp->client->dev, "peripheral sessions not allowed\n");
-	return -EINVAL;
-#endif
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int
-isp1301_start_srp(struct usb_otg *otg)
-{
-	struct isp1301	*isp = container_of(otg->usb_phy, struct isp1301, phy);
-	u32		otg_ctrl;
-
-	if (isp != the_transceiver || isp->phy.otg->state != OTG_STATE_B_IDLE)
-		return -ENODEV;
-
-	otg_ctrl = omap_readl(OTG_CTRL);
-	if (!(otg_ctrl & OTG_BSESSEND))
-		return -EINVAL;
-
-	otg_ctrl |= OTG_B_BUSREQ;
-	otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK;
-	omap_writel(otg_ctrl, OTG_CTRL);
-	isp->phy.otg->state = OTG_STATE_B_SRP_INIT;
-
-	pr_debug("otg: SRP, %s ... %06x\n", state_name(isp),
-			omap_readl(OTG_CTRL));
-#ifdef	CONFIG_USB_OTG
-	check_state(isp, __func__);
-#endif
-	return 0;
-}
-
-static int
-isp1301_start_hnp(struct usb_otg *otg)
-{
-#ifdef	CONFIG_USB_OTG
-	struct isp1301	*isp = container_of(otg->usb_phy, struct isp1301, phy);
-	u32 l;
-
-	if (isp != the_transceiver)
-		return -ENODEV;
-	if (otg->default_a && (otg->host == NULL || !otg->host->b_hnp_enable))
-		return -ENOTCONN;
-	if (!otg->default_a && (otg->gadget == NULL
-			|| !otg->gadget->b_hnp_enable))
-		return -ENOTCONN;
-
-	/* We want hardware to manage most HNP protocol timings.
-	 * So do this part as early as possible...
-	 */
-	switch (isp->phy.otg->state) {
-	case OTG_STATE_B_HOST:
-		isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
-		/* caller will suspend next */
-		break;
-	case OTG_STATE_A_HOST:
-#if 0
-		/* autoconnect mode avoids irq latency bugs */
-		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1,
-				MC1_BDIS_ACON_EN);
-#endif
-		/* caller must suspend then clear A_BUSREQ */
-		usb_gadget_vbus_connect(otg->gadget);
-		l = omap_readl(OTG_CTRL);
-		l |= OTG_A_SETB_HNPEN;
-		omap_writel(l, OTG_CTRL);
-
-		break;
-	case OTG_STATE_A_PERIPHERAL:
-		/* initiated by B-Host suspend */
-		break;
-	default:
-		return -EILSEQ;
-	}
-	pr_debug("otg: HNP %s, %06x ...\n",
-		state_name(isp), omap_readl(OTG_CTRL));
-	check_state(isp, __func__);
-	return 0;
-#else
-	/* srp-only */
-	return -EINVAL;
-#endif
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int
-isp1301_probe(struct i2c_client *i2c)
-{
-	int			status;
-	struct isp1301		*isp;
-	int irq;
-
-	if (the_transceiver)
-		return 0;
-
-	isp = kzalloc(sizeof *isp, GFP_KERNEL);
-	if (!isp)
-		return 0;
-
-	isp->phy.otg = kzalloc(sizeof *isp->phy.otg, GFP_KERNEL);
-	if (!isp->phy.otg) {
-		kfree(isp);
-		return 0;
-	}
-
-	INIT_WORK(&isp->work, isp1301_work);
-	timer_setup(&isp->timer, isp1301_timer, 0);
-
-	i2c_set_clientdata(i2c, isp);
-	isp->client = i2c;
-
-	/* verify the chip (shouldn't be necessary) */
-	status = isp1301_get_u16(isp, ISP1301_VENDOR_ID);
-	if (status != I2C_VENDOR_ID_PHILIPS) {
-		dev_dbg(&i2c->dev, "not philips id: %d\n", status);
-		goto fail;
-	}
-	status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID);
-	if (status != I2C_PRODUCT_ID_PHILIPS_1301) {
-		dev_dbg(&i2c->dev, "not isp1301, %d\n", status);
-		goto fail;
-	}
-	isp->i2c_release = i2c->dev.release;
-	i2c->dev.release = isp1301_release;
-
-	/* initial development used chiprev 2.00 */
-	status = i2c_smbus_read_word_data(i2c, ISP1301_BCD_DEVICE);
-	dev_info(&i2c->dev, "chiprev %x.%02x, driver " DRIVER_VERSION "\n",
-		status >> 8, status & 0xff);
-
-	/* make like power-on reset */
-	isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_MASK);
-
-	isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_BI_DI);
-	isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, ~MC2_BI_DI);
-
-	isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1,
-				OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN);
-	isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1,
-				~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
-
-	isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, ~0);
-	isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0);
-	isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0);
-
-#ifdef	CONFIG_USB_OTG
-	status = otg_bind(isp);
-	if (status < 0) {
-		dev_dbg(&i2c->dev, "can't bind OTG\n");
-		goto fail;
-	}
-#endif
-
-	irq = i2c->irq;
-
-	status = request_irq(irq, isp1301_irq,
-			isp->irq_type, DRIVER_NAME, isp);
-	if (status < 0) {
-		dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n",
-				i2c->irq, status);
-		goto fail;
-	}
-
-	isp->phy.dev = &i2c->dev;
-	isp->phy.label = DRIVER_NAME;
-	isp->phy.otg->usb_phy = &isp->phy;
-	isp->phy.otg->set_host = isp1301_set_host;
-	isp->phy.otg->set_peripheral = isp1301_set_peripheral;
-	isp->phy.otg->start_srp = isp1301_start_srp;
-	isp->phy.otg->start_hnp = isp1301_start_hnp;
-
-	power_down(isp);
-	the_transceiver = isp;
-
-#ifdef	CONFIG_USB_OTG
-	update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE));
-	update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS));
-#endif
-
-	dump_regs(isp, __func__);
-
-#ifdef	VERBOSE
-	mod_timer(&isp->timer, jiffies + TIMER_JIFFIES);
-	dev_dbg(&i2c->dev, "scheduled timer, %d min\n", TIMER_MINUTES);
-#endif
-
-	status = usb_add_phy(&isp->phy, USB_PHY_TYPE_USB2);
-	if (status < 0)
-		dev_err(&i2c->dev, "can't register transceiver, %d\n",
-			status);
-
-	return 0;
-
-fail:
-	kfree(isp->phy.otg);
-	kfree(isp);
-	return -ENODEV;
-}
-
-static const struct i2c_device_id isp1301_id[] = {
-	{ "isp1301_omap", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, isp1301_id);
-
-static struct i2c_driver isp1301_driver = {
-	.driver = {
-		.name	= "isp1301_omap",
-	},
-	.probe_new	= isp1301_probe,
-	.remove		= isp1301_remove,
-	.id_table	= isp1301_id,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int __init isp_init(void)
-{
-	return i2c_add_driver(&isp1301_driver);
-}
-subsys_initcall(isp_init);
-
-static void __exit isp_exit(void)
-{
-	if (the_transceiver)
-		usb_remove_phy(&the_transceiver->phy);
-	i2c_del_driver(&isp1301_driver);
-}
-module_exit(isp_exit);
-