usb: phy: Remove the phy-rcar-gen2-usb driver

The phy-rcar-gen2-usb driver, which supports legacy platform data only,
is no longer used since commit a483dcbfa21f919c ("ARM: shmobile: lager:
Remove legacy board support").

This driver was superseded by the DT-only phy-rcar-gen2 driver, which
was introduced in commit 1233f59f745b237d ("phy: Renesas R-Car Gen2 PHY
driver").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 0 insertions, 260 deletions

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 2175678e674e..3cd3bee54ca6 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -186,19 +186,6 @@ config USB_RCAR_PHY
 	  To compile this driver as a module, choose M here: the
 	  module will be called phy-rcar-usb.
 
-config USB_RCAR_GEN2_PHY
-	tristate "Renesas R-Car Gen2 USB PHY support"
-	depends on ARCH_R8A7790 || ARCH_R8A7791 || COMPILE_TEST
-	select USB_PHY
-	help
-	  Say Y here to add support for the Renesas R-Car Gen2 USB PHY driver.
-	  It is typically used to control internal USB PHY for USBHS,
-	  and to configure shared USB channels 0 and 2.
-	  This driver supports R8A7790 and R8A7791.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called phy-rcar-gen2-usb.
-
 config USB_ULPI
 	bool "Generic ULPI Transceiver Driver"
 	depends on ARM || ARM64
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 75f2bba58c84..e36ab1d46d8b 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_USB_MSM_OTG)		+= phy-msm-usb.o
 obj-$(CONFIG_USB_MV_OTG)		+= phy-mv-usb.o
 obj-$(CONFIG_USB_MXS_PHY)		+= phy-mxs-usb.o
 obj-$(CONFIG_USB_RCAR_PHY)		+= phy-rcar-usb.o
-obj-$(CONFIG_USB_RCAR_GEN2_PHY)		+= phy-rcar-gen2-usb.o
 obj-$(CONFIG_USB_ULPI)			+= phy-ulpi.o
 obj-$(CONFIG_USB_ULPI_VIEWPORT)		+= phy-ulpi-viewport.o
 obj-$(CONFIG_KEYSTONE_USB_PHY)		+= phy-keystone.o
diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c
deleted file mode 100644
index f81800b6562a..000000000000
--- a/drivers/usb/phy/phy-rcar-gen2-usb.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Renesas R-Car Gen2 USB phy driver
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/platform_data/usb-rcar-gen2-phy.h>
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/usb/otg.h>
-
-struct rcar_gen2_usb_phy_priv {
-	struct usb_phy phy;
-	void __iomem *base;
-	struct clk *clk;
-	spinlock_t lock;
-	int usecount;
-	u32 ugctrl2;
-};
-
-#define usb_phy_to_priv(p) container_of(p, struct rcar_gen2_usb_phy_priv, phy)
-
-/* Low Power Status register */
-#define USBHS_LPSTS_REG			0x02
-#define USBHS_LPSTS_SUSPM		(1 << 14)
-
-/* USB General control register */
-#define USBHS_UGCTRL_REG		0x80
-#define USBHS_UGCTRL_CONNECT		(1 << 2)
-#define USBHS_UGCTRL_PLLRESET		(1 << 0)
-
-/* USB General control register 2 */
-#define USBHS_UGCTRL2_REG		0x84
-#define USBHS_UGCTRL2_USB0_PCI		(1 << 4)
-#define USBHS_UGCTRL2_USB0_HS		(3 << 4)
-#define USBHS_UGCTRL2_USB2_PCI		(0 << 31)
-#define USBHS_UGCTRL2_USB2_SS		(1 << 31)
-
-/* USB General status register */
-#define USBHS_UGSTS_REG			0x88
-#define USBHS_UGSTS_LOCK		(1 << 8)
-
-/* Enable USBHS internal phy */
-static int __rcar_gen2_usbhs_phy_enable(void __iomem *base)
-{
-	u32 val;
-	int i;
-
-	/* USBHS PHY power on */
-	val = ioread32(base + USBHS_UGCTRL_REG);
-	val &= ~USBHS_UGCTRL_PLLRESET;
-	iowrite32(val, base + USBHS_UGCTRL_REG);
-
-	val = ioread16(base + USBHS_LPSTS_REG);
-	val |= USBHS_LPSTS_SUSPM;
-	iowrite16(val, base + USBHS_LPSTS_REG);
-
-	for (i = 0; i < 20; i++) {
-		val = ioread32(base + USBHS_UGSTS_REG);
-		if ((val & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) {
-			val = ioread32(base + USBHS_UGCTRL_REG);
-			val |= USBHS_UGCTRL_CONNECT;
-			iowrite32(val, base + USBHS_UGCTRL_REG);
-			return 0;
-		}
-		udelay(1);
-	}
-
-	/* Timed out waiting for the PLL lock */
-	return -ETIMEDOUT;
-}
-
-/* Disable USBHS internal phy */
-static int __rcar_gen2_usbhs_phy_disable(void __iomem *base)
-{
-	u32 val;
-
-	/* USBHS PHY power off */
-	val = ioread32(base + USBHS_UGCTRL_REG);
-	val &= ~USBHS_UGCTRL_CONNECT;
-	iowrite32(val, base + USBHS_UGCTRL_REG);
-
-	val = ioread16(base + USBHS_LPSTS_REG);
-	val &= ~USBHS_LPSTS_SUSPM;
-	iowrite16(val, base + USBHS_LPSTS_REG);
-
-	val = ioread32(base + USBHS_UGCTRL_REG);
-	val |= USBHS_UGCTRL_PLLRESET;
-	iowrite32(val, base + USBHS_UGCTRL_REG);
-	return 0;
-}
-
-/* Setup USB channels */
-static void __rcar_gen2_usb_phy_init(struct rcar_gen2_usb_phy_priv *priv)
-{
-	u32 val;
-
-	clk_prepare_enable(priv->clk);
-
-	/* Set USB channels in the USBHS UGCTRL2 register */
-	val = ioread32(priv->base + USBHS_UGCTRL2_REG);
-	val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS);
-	val |= priv->ugctrl2;
-	iowrite32(val, priv->base + USBHS_UGCTRL2_REG);
-}
-
-/* Shutdown USB channels */
-static void __rcar_gen2_usb_phy_shutdown(struct rcar_gen2_usb_phy_priv *priv)
-{
-	__rcar_gen2_usbhs_phy_disable(priv->base);
-	clk_disable_unprepare(priv->clk);
-}
-
-static int rcar_gen2_usb_phy_set_suspend(struct usb_phy *phy, int suspend)
-{
-	struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
-	unsigned long flags;
-	int retval;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	retval = suspend ? __rcar_gen2_usbhs_phy_disable(priv->base) :
-			   __rcar_gen2_usbhs_phy_enable(priv->base);
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return retval;
-}
-
-static int rcar_gen2_usb_phy_init(struct usb_phy *phy)
-{
-	struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	/*
-	 * Enable the clock and setup USB channels
-	 * if it's the first user
-	 */
-	if (!priv->usecount++)
-		__rcar_gen2_usb_phy_init(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return 0;
-}
-
-static void rcar_gen2_usb_phy_shutdown(struct usb_phy *phy)
-{
-	struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!priv->usecount) {
-		dev_warn(phy->dev, "Trying to disable phy with 0 usecount\n");
-		goto out;
-	}
-
-	/* Disable everything if it's the last user */
-	if (!--priv->usecount)
-		__rcar_gen2_usb_phy_shutdown(priv);
-out:
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static int rcar_gen2_usb_phy_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct rcar_gen2_phy_platform_data *pdata;
-	struct rcar_gen2_usb_phy_priv *priv;
-	struct resource *res;
-	void __iomem *base;
-	struct clk *clk;
-	int retval;
-
-	pdata = dev_get_platdata(dev);
-	if (!pdata) {
-		dev_err(dev, "No platform data\n");
-		return -EINVAL;
-	}
-
-	clk = devm_clk_get(dev, "usbhs");
-	if (IS_ERR(clk)) {
-		dev_err(dev, "Can't get the clock\n");
-		return PTR_ERR(clk);
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
-
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	spin_lock_init(&priv->lock);
-	priv->clk = clk;
-	priv->base = base;
-	priv->ugctrl2 = pdata->chan0_pci ?
-			USBHS_UGCTRL2_USB0_PCI : USBHS_UGCTRL2_USB0_HS;
-	priv->ugctrl2 |= pdata->chan2_pci ?
-			USBHS_UGCTRL2_USB2_PCI : USBHS_UGCTRL2_USB2_SS;
-	priv->phy.dev = dev;
-	priv->phy.label = dev_name(dev);
-	priv->phy.init = rcar_gen2_usb_phy_init;
-	priv->phy.shutdown = rcar_gen2_usb_phy_shutdown;
-	priv->phy.set_suspend = rcar_gen2_usb_phy_set_suspend;
-
-	retval = usb_add_phy_dev(&priv->phy);
-	if (retval < 0) {
-		dev_err(dev, "Failed to add USB phy\n");
-		return retval;
-	}
-
-	platform_set_drvdata(pdev, priv);
-
-	return retval;
-}
-
-static int rcar_gen2_usb_phy_remove(struct platform_device *pdev)
-{
-	struct rcar_gen2_usb_phy_priv *priv = platform_get_drvdata(pdev);
-
-	usb_remove_phy(&priv->phy);
-
-	return 0;
-}
-
-static struct platform_driver rcar_gen2_usb_phy_driver = {
-	.driver = {
-		.name = "usb_phy_rcar_gen2",
-	},
-	.probe = rcar_gen2_usb_phy_probe,
-	.remove = rcar_gen2_usb_phy_remove,
-};
-
-module_platform_driver(rcar_gen2_usb_phy_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Renesas R-Car Gen2 USB phy");
-MODULE_AUTHOR("Valentine Barshak <valentine.barshak@cogentembedded.com>");