diff options
| author | Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> | 2014-12-15 23:42:13 +0100 |
|---|---|---|
| committer | Felipe Balbi <balbi@ti.com> | 2015-01-12 22:36:28 +0100 |
| commit | d7b3968dbcbb620acf92164752031fa276917db9 (patch) | |
| tree | d0be8a758d4d321643680beb331e91cf8dcf9bae /drivers/usb/renesas_usbhs/common.c | |
| parent | usb: dwc2: gadget: report disconnection after reset (diff) | |
| download | linux-d7b3968dbcbb620acf92164752031fa276917db9.tar.xz linux-d7b3968dbcbb620acf92164752031fa276917db9.zip | |
usb: renesas_usbhs: add OTG ID signal sensing
On the Renesas R8A7791 SoC based boards there's MAX3355 USB OTG chip and mini-AB
USB connector corresponding to USB port 0 driven either by EHCI/OHCI or Renesas
USBHS gadget controller. And we'd like the host/gadget drivers to work based on
the cable type connected. An 'extcon' driver for MAX3355 has been written, so we
only need to bind to it via device tree which I'm doing in this patch.
(Perhaps, it would also make sense to use OTG HNP when the USBHS host mode is
active and a B-cable is connected but I don't have access to host-capable USBHS,
so wouldn't be able to test it.)
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers/usb/renesas_usbhs/common.c')
| -rw-r--r-- | drivers/usb/renesas_usbhs/common.c | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 76d14f5d246a..4cf77d3c3bd2 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -363,6 +363,7 @@ static void usbhsc_hotplug(struct usbhs_priv *priv) struct usbhs_mod *mod = usbhs_mod_get_current(priv); int id; int enable; + int cable; int ret; /* @@ -376,6 +377,16 @@ static void usbhsc_hotplug(struct usbhs_priv *priv) id = usbhs_platform_call(priv, get_id, pdev); if (enable && !mod) { + if (priv->edev) { + cable = extcon_get_cable_state(priv->edev, "USB-HOST"); + if ((cable > 0 && id != USBHS_HOST) || + (!cable && id != USBHS_GADGET)) { + dev_info(&pdev->dev, + "USB cable plugged in doesn't match the selected role!\n"); + return; + } + } + ret = usbhs_mod_change(priv, id); if (ret < 0) return; @@ -514,6 +525,12 @@ static int usbhs_probe(struct platform_device *pdev) if (IS_ERR(priv->base)) return PTR_ERR(priv->base); + if (of_property_read_bool(pdev->dev.of_node, "extcon")) { + priv->edev = extcon_get_edev_by_phandle(&pdev->dev, 0); + if (IS_ERR(priv->edev)) + return PTR_ERR(priv->edev); + } + /* * care platform info */ |