Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 123 insertions, 0 deletions

diff --git a/drivers/usb/serial/belkin_sa.h b/drivers/usb/serial/belkin_sa.h
new file mode 100644
index 000000000000..9116b92f4622
--- /dev/null
+++ b/drivers/usb/serial/belkin_sa.h
@@ -0,0 +1,123 @@
+/*
+ * Definitions for Belkin USB Serial Adapter Driver
+ *
+ *  Copyright (C) 2000
+ *      William Greathouse (wgreathouse@smva.com)
+ *
+ *  This program is largely derived from work by the linux-usb group
+ *  and associated source files.  Please see the usb/serial files for
+ *  individual credits and copyrights.
+ *  
+ * 	This program is free software; you can redistribute it and/or modify
+ * 	it under the terms of the GNU General Public License as published by
+ * 	the Free Software Foundation; either version 2 of the License, or
+ * 	(at your option) any later version.
+ *
+ * See Documentation/usb/usb-serial.txt for more information on using this driver
+ *
+ * 12-Mar-2001 gkh
+ *	Added GoHubs GO-COM232 device id.
+ *
+ * 06-Nov-2000 gkh
+ *	Added old Belkin and Peracom device ids, which this driver supports
+ *
+ * 12-Oct-2000 William Greathouse
+ *    First cut at supporting Belkin USB Serial Adapter F5U103
+ *    I did not have a copy of the original work to support this
+ *    adapter, so pardon any stupid mistakes.  All of the information
+ *    I am using to write this driver was acquired by using a modified
+ *    UsbSnoop on Windows2000.
+ *    
+ */
+
+#ifndef __LINUX_USB_SERIAL_BSA_H
+#define __LINUX_USB_SERIAL_BSA_H
+
+#define BELKIN_DOCKSTATION_VID	0x050d	/* Vendor Id */
+#define BELKIN_DOCKSTATION_PID	0x1203	/* Product Id */
+
+#define BELKIN_SA_VID	0x050d	/* Vendor Id */
+#define BELKIN_SA_PID	0x0103	/* Product Id */
+
+#define BELKIN_OLD_VID	0x056c	/* Belkin's "old" vendor id */
+#define BELKIN_OLD_PID	0x8007	/* Belkin's "old" single port serial converter's id */
+
+#define PERACOM_VID	0x0565	/* Peracom's vendor id */
+#define PERACOM_PID	0x0001	/* Peracom's single port serial converter's id */
+
+#define GOHUBS_VID	0x0921	/* GoHubs vendor id */
+#define GOHUBS_PID	0x1000	/* GoHubs single port serial converter's id (identical to the Peracom device) */
+#define HANDYLINK_PID	0x1200	/* HandyLink USB's id (identical to the Peracom device) */
+
+/* Vendor Request Interface */
+#define BELKIN_SA_SET_BAUDRATE_REQUEST	0  /* Set baud rate */
+#define BELKIN_SA_SET_STOP_BITS_REQUEST	1  /* Set stop bits (1,2) */
+#define BELKIN_SA_SET_DATA_BITS_REQUEST	2  /* Set data bits (5,6,7,8) */
+#define BELKIN_SA_SET_PARITY_REQUEST	3  /* Set parity (None, Even, Odd) */
+
+#define BELKIN_SA_SET_DTR_REQUEST	10 /* Set DTR state */
+#define BELKIN_SA_SET_RTS_REQUEST	11 /* Set RTS state */
+#define BELKIN_SA_SET_BREAK_REQUEST	12 /* Set BREAK state */
+
+#define BELKIN_SA_SET_FLOW_CTRL_REQUEST	16 /* Set flow control mode */
+
+
+#ifdef WHEN_I_LEARN_THIS
+#define BELKIN_SA_SET_MAGIC_REQUEST	17 /* I don't know, possibly flush */
+					   /* (always in Wininit sequence before flow control) */
+#define BELKIN_SA_RESET 		xx /* Reset the port */
+#define BELKIN_SA_GET_MODEM_STATUS	xx /* Force return of modem status register */
+#endif
+
+#define BELKIN_SA_SET_REQUEST_TYPE	0x40
+
+#define BELKIN_SA_BAUD(b)		(230400/b)
+
+#define BELKIN_SA_STOP_BITS(b)		(b-1)
+
+#define BELKIN_SA_DATA_BITS(b)		(b-5)
+
+#define BELKIN_SA_PARITY_NONE		0
+#define BELKIN_SA_PARITY_EVEN		1
+#define BELKIN_SA_PARITY_ODD		2
+#define BELKIN_SA_PARITY_MARK		3
+#define BELKIN_SA_PARITY_SPACE		4
+
+#define BELKIN_SA_FLOW_NONE		0x0000	/* No flow control */
+#define BELKIN_SA_FLOW_OCTS		0x0001	/* use CTS input to throttle output */
+#define BELKIN_SA_FLOW_ODSR		0x0002	/* use DSR input to throttle output */
+#define BELKIN_SA_FLOW_IDSR		0x0004	/* use DSR input to enable receive */
+#define BELKIN_SA_FLOW_IDTR		0x0008	/* use DTR output for input flow control */
+#define BELKIN_SA_FLOW_IRTS		0x0010	/* use RTS output for input flow control */
+#define BELKIN_SA_FLOW_ORTS		0x0020	/* use RTS to indicate data available to send */
+#define BELKIN_SA_FLOW_ERRSUB		0x0040	/* ???? guess ???? substitute inline errors */
+#define BELKIN_SA_FLOW_OXON		0x0080	/* use XON/XOFF for output flow control */
+#define BELKIN_SA_FLOW_IXON		0x0100	/* use XON/XOFF for input flow control */
+
+/*
+ * It seems that the interrupt pipe is closely modelled after the
+ * 16550 register layout.  This is probably because the adapter can 
+ * be used in a "DOS" environment to simulate a standard hardware port.
+ */
+#define BELKIN_SA_LSR_INDEX		2		/* Line Status Register */
+#define BELKIN_SA_LSR_RDR		0x01	/* receive data ready */
+#define BELKIN_SA_LSR_OE		0x02	/* overrun error */
+#define BELKIN_SA_LSR_PE		0x04	/* parity error */
+#define BELKIN_SA_LSR_FE		0x08	/* framing error */
+#define BELKIN_SA_LSR_BI		0x10	/* break indicator */
+#define BELKIN_SA_LSR_THE		0x20	/* transmit holding register empty */
+#define BELKIN_SA_LSR_TE		0x40	/* transmit register empty */
+#define BELKIN_SA_LSR_ERR		0x80	/* OE | PE | FE | BI */
+
+#define BELKIN_SA_MSR_INDEX		3		/* Modem Status Register */
+#define BELKIN_SA_MSR_DCTS		0x01	/* Delta CTS */
+#define BELKIN_SA_MSR_DDSR		0x02	/* Delta DSR */
+#define BELKIN_SA_MSR_DRI		0x04	/* Delta RI */
+#define BELKIN_SA_MSR_DCD		0x08	/* Delta CD */
+#define BELKIN_SA_MSR_CTS		0x10	/* Current CTS */
+#define BELKIN_SA_MSR_DSR		0x20	/* Current DSR */
+#define BELKIN_SA_MSR_RI		0x40	/* Current RI */
+#define BELKIN_SA_MSR_CD		0x80	/* Current CD */
+
+#endif /* __LINUX_USB_SERIAL_BSA_H */
+