USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h header

This is a strictly move-only patch to relocate all FTDI device
product ID definitions to their own ftdi_sio_ids.h header
(following the usual *_ids.h kernel tree convention, too),
thus correcting the slightly too messy appearance
(crucial driver defines were stuck somewhere in the decaying middle swamp
of the huge existing header).

Compile-tested, based on latest mainline git.

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 4 insertions, 955 deletions

diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 4586a24fafb0..b0e0d64f822e 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -1,7 +1,10 @@
 /*
- * Definitions for the FTDI USB Single Port Serial Converter -
+ * Driver definitions for the FTDI USB Single Port Serial Converter -
  * known as FTDI_SIO (Serial Input/Output application of the chipset)
  *
+ * For USB vendor/product IDs (VID/PID), please see ftdi_sio_ids.h
+ *
+ *
  * The example I have is known as the USC-1000 which is available from
  * http://www.dse.co.nz - cat no XH4214 It looks similar to this:
  * http://www.dansdata.com/usbser.htm but I can't be sure There are other
@@ -17,880 +20,7 @@
  * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the
  * FTDI_SIO implementation.
  *
- * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
- * from Rudolf Gugler
- *
- */
-
-#define FTDI_VID	0x0403	/* Vendor Id */
-#define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX  */
-#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
-#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
-#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
-#define FTDI_232RL_PID  0xFBFA  /* Product ID for FT232RL */
-#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
-#define FTDI_RELAIS_PID	0xFA10  /* Relais device from Rudolf Gugler */
-#define FTDI_NF_RIC_VID	0x0DCD	/* Vendor Id */
-#define FTDI_NF_RIC_PID	0x0001	/* Product Id */
-#define FTDI_USBX_707_PID 0xF857	/* ADSTech IR Blaster USBX-707 */
-
-/* Larsen and Brusgaard AltiTrack/USBtrack  */
-#define LARSENBRUSGAARD_VID		0x0FD8
-#define LB_ALTITRACK_PID		0x0001
-
-/* www.canusb.com Lawicel CANUSB device */
-#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
-
-/* AlphaMicro Components AMC-232USB01 device */
-#define FTDI_AMC232_PID 0xFF00 /* Product Id */
-
-/* www.candapter.com Ewert Energy Systems CANdapter device */
-#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
-
-/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
-/* the VID is the standard ftdi vid (FTDI_VID) */
-#define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
-#define FTDI_SCS_DEVICE_1_PID 0xD011    /* SCS Tracker / DSP TNC */
-#define FTDI_SCS_DEVICE_2_PID 0xD012
-#define FTDI_SCS_DEVICE_3_PID 0xD013
-#define FTDI_SCS_DEVICE_4_PID 0xD014
-#define FTDI_SCS_DEVICE_5_PID 0xD015
-#define FTDI_SCS_DEVICE_6_PID 0xD016
-#define FTDI_SCS_DEVICE_7_PID 0xD017
-
-/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
-#define FTDI_ACTZWAVE_PID	0xF2D0
-
-
-/* www.starting-point-systems.com µChameleon device */
-#define FTDI_MICRO_CHAMELEON_PID	0xCAA0	/* Product Id */
-
-/* www.irtrans.de device */
-#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
-
-
-/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
-#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
-
-/* iPlus device */
-#define FTDI_IPLUS_PID 0xD070 /* Product Id */
-#define FTDI_IPLUS2_PID 0xD071 /* Product Id */
-
-/* DMX4ALL DMX Interfaces */
-#define FTDI_DMX4ALL 0xC850
-
-/* OpenDCC (www.opendcc.de) product id */
-#define FTDI_OPENDCC_PID	0xBFD8
-#define FTDI_OPENDCC_SNIFFER_PID	0xBFD9
-#define FTDI_OPENDCC_THROTTLE_PID	0xBFDA
-#define FTDI_OPENDCC_GATEWAY_PID	0xBFDB
-
-/* Sprog II (Andrew Crosland's SprogII DCC interface) */
-#define FTDI_SPROG_II		0xF0C8
-
-/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
-/* they use the ftdi chipset for the USB interface and the vendor id is the same */
-#define FTDI_XF_632_PID 0xFC08	/* 632: 16x2 Character Display */
-#define FTDI_XF_634_PID 0xFC09	/* 634: 20x4 Character Display */
-#define FTDI_XF_547_PID 0xFC0A	/* 547: Two line Display */
-#define FTDI_XF_633_PID 0xFC0B	/* 633: 16x2 Character Display with Keys */
-#define FTDI_XF_631_PID 0xFC0C	/* 631: 20x2 Character Display */
-#define FTDI_XF_635_PID 0xFC0D	/* 635: 20x4 Character Display */
-#define FTDI_XF_640_PID 0xFC0E	/* 640: Two line Display */
-#define FTDI_XF_642_PID 0xFC0F	/* 642: Two line Display */
-
-/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */
-/* broadband internet service.  The following PID is exhibited by the usb device supplied */
-/* (the VID is the standard ftdi vid (FTDI_VID) */
-#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
-
-/*
- * PCDJ use ftdi based dj-controllers.  The following PID is for their DAC-2 device
- * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen)
- * (the VID is the standard ftdi vid (FTDI_VID) */
-#define FTDI_PCDJ_DAC2_PID 0xFA88
-
-/*
- * The following are the values for the Matrix Orbital LCD displays,
- * which are the FT232BM ( similar to the 8U232AM )
- */
-#define FTDI_MTXORB_0_PID      0xFA00  /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_1_PID      0xFA01  /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_2_PID      0xFA02  /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_3_PID      0xFA03  /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_4_PID      0xFA04  /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_5_PID      0xFA05  /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_6_PID      0xFA06  /* Matrix Orbital Product Id */
-
-/* OOCDlink by Joern Kaipf <joernk@web.de>
- * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
-#define FTDI_OOCDLINK_PID	0xbaf8	/* Amontec JTAGkey */
-
-/*
- * The following are the values for the Matrix Orbital FTDI Range
- * Anything in this range will use an FT232RL.
- */
-#define MTXORB_VID			0x1B3D
-#define MTXORB_FTDI_RANGE_0100_PID	0x0100
-#define MTXORB_FTDI_RANGE_0101_PID	0x0101
-#define MTXORB_FTDI_RANGE_0102_PID	0x0102
-#define MTXORB_FTDI_RANGE_0103_PID	0x0103
-#define MTXORB_FTDI_RANGE_0104_PID	0x0104
-#define MTXORB_FTDI_RANGE_0105_PID	0x0105
-#define MTXORB_FTDI_RANGE_0106_PID	0x0106
-#define MTXORB_FTDI_RANGE_0107_PID	0x0107
-#define MTXORB_FTDI_RANGE_0108_PID	0x0108
-#define MTXORB_FTDI_RANGE_0109_PID	0x0109
-#define MTXORB_FTDI_RANGE_010A_PID	0x010A
-#define MTXORB_FTDI_RANGE_010B_PID	0x010B
-#define MTXORB_FTDI_RANGE_010C_PID	0x010C
-#define MTXORB_FTDI_RANGE_010D_PID	0x010D
-#define MTXORB_FTDI_RANGE_010E_PID	0x010E
-#define MTXORB_FTDI_RANGE_010F_PID	0x010F
-#define MTXORB_FTDI_RANGE_0110_PID	0x0110
-#define MTXORB_FTDI_RANGE_0111_PID	0x0111
-#define MTXORB_FTDI_RANGE_0112_PID	0x0112
-#define MTXORB_FTDI_RANGE_0113_PID	0x0113
-#define MTXORB_FTDI_RANGE_0114_PID	0x0114
-#define MTXORB_FTDI_RANGE_0115_PID	0x0115
-#define MTXORB_FTDI_RANGE_0116_PID	0x0116
-#define MTXORB_FTDI_RANGE_0117_PID	0x0117
-#define MTXORB_FTDI_RANGE_0118_PID	0x0118
-#define MTXORB_FTDI_RANGE_0119_PID	0x0119
-#define MTXORB_FTDI_RANGE_011A_PID	0x011A
-#define MTXORB_FTDI_RANGE_011B_PID	0x011B
-#define MTXORB_FTDI_RANGE_011C_PID	0x011C
-#define MTXORB_FTDI_RANGE_011D_PID	0x011D
-#define MTXORB_FTDI_RANGE_011E_PID	0x011E
-#define MTXORB_FTDI_RANGE_011F_PID	0x011F
-#define MTXORB_FTDI_RANGE_0120_PID	0x0120
-#define MTXORB_FTDI_RANGE_0121_PID	0x0121
-#define MTXORB_FTDI_RANGE_0122_PID	0x0122
-#define MTXORB_FTDI_RANGE_0123_PID	0x0123
-#define MTXORB_FTDI_RANGE_0124_PID	0x0124
-#define MTXORB_FTDI_RANGE_0125_PID	0x0125
-#define MTXORB_FTDI_RANGE_0126_PID	0x0126
-#define MTXORB_FTDI_RANGE_0127_PID	0x0127
-#define MTXORB_FTDI_RANGE_0128_PID	0x0128
-#define MTXORB_FTDI_RANGE_0129_PID	0x0129
-#define MTXORB_FTDI_RANGE_012A_PID	0x012A
-#define MTXORB_FTDI_RANGE_012B_PID	0x012B
-#define MTXORB_FTDI_RANGE_012C_PID	0x012C
-#define MTXORB_FTDI_RANGE_012D_PID	0x012D
-#define MTXORB_FTDI_RANGE_012E_PID	0x012E
-#define MTXORB_FTDI_RANGE_012F_PID	0x012F
-#define MTXORB_FTDI_RANGE_0130_PID	0x0130
-#define MTXORB_FTDI_RANGE_0131_PID	0x0131
-#define MTXORB_FTDI_RANGE_0132_PID	0x0132
-#define MTXORB_FTDI_RANGE_0133_PID	0x0133
-#define MTXORB_FTDI_RANGE_0134_PID	0x0134
-#define MTXORB_FTDI_RANGE_0135_PID	0x0135
-#define MTXORB_FTDI_RANGE_0136_PID	0x0136
-#define MTXORB_FTDI_RANGE_0137_PID	0x0137
-#define MTXORB_FTDI_RANGE_0138_PID	0x0138
-#define MTXORB_FTDI_RANGE_0139_PID	0x0139
-#define MTXORB_FTDI_RANGE_013A_PID	0x013A
-#define MTXORB_FTDI_RANGE_013B_PID	0x013B
-#define MTXORB_FTDI_RANGE_013C_PID	0x013C
-#define MTXORB_FTDI_RANGE_013D_PID	0x013D
-#define MTXORB_FTDI_RANGE_013E_PID	0x013E
-#define MTXORB_FTDI_RANGE_013F_PID	0x013F
-#define MTXORB_FTDI_RANGE_0140_PID	0x0140
-#define MTXORB_FTDI_RANGE_0141_PID	0x0141
-#define MTXORB_FTDI_RANGE_0142_PID	0x0142
-#define MTXORB_FTDI_RANGE_0143_PID	0x0143
-#define MTXORB_FTDI_RANGE_0144_PID	0x0144
-#define MTXORB_FTDI_RANGE_0145_PID	0x0145
-#define MTXORB_FTDI_RANGE_0146_PID	0x0146
-#define MTXORB_FTDI_RANGE_0147_PID	0x0147
-#define MTXORB_FTDI_RANGE_0148_PID	0x0148
-#define MTXORB_FTDI_RANGE_0149_PID	0x0149
-#define MTXORB_FTDI_RANGE_014A_PID	0x014A
-#define MTXORB_FTDI_RANGE_014B_PID	0x014B
-#define MTXORB_FTDI_RANGE_014C_PID	0x014C
-#define MTXORB_FTDI_RANGE_014D_PID	0x014D
-#define MTXORB_FTDI_RANGE_014E_PID	0x014E
-#define MTXORB_FTDI_RANGE_014F_PID	0x014F
-#define MTXORB_FTDI_RANGE_0150_PID	0x0150
-#define MTXORB_FTDI_RANGE_0151_PID	0x0151
-#define MTXORB_FTDI_RANGE_0152_PID	0x0152
-#define MTXORB_FTDI_RANGE_0153_PID	0x0153
-#define MTXORB_FTDI_RANGE_0154_PID	0x0154
-#define MTXORB_FTDI_RANGE_0155_PID	0x0155
-#define MTXORB_FTDI_RANGE_0156_PID	0x0156
-#define MTXORB_FTDI_RANGE_0157_PID	0x0157
-#define MTXORB_FTDI_RANGE_0158_PID	0x0158
-#define MTXORB_FTDI_RANGE_0159_PID	0x0159
-#define MTXORB_FTDI_RANGE_015A_PID	0x015A
-#define MTXORB_FTDI_RANGE_015B_PID	0x015B
-#define MTXORB_FTDI_RANGE_015C_PID	0x015C
-#define MTXORB_FTDI_RANGE_015D_PID	0x015D
-#define MTXORB_FTDI_RANGE_015E_PID	0x015E
-#define MTXORB_FTDI_RANGE_015F_PID	0x015F
-#define MTXORB_FTDI_RANGE_0160_PID	0x0160
-#define MTXORB_FTDI_RANGE_0161_PID	0x0161
-#define MTXORB_FTDI_RANGE_0162_PID	0x0162
-#define MTXORB_FTDI_RANGE_0163_PID	0x0163
-#define MTXORB_FTDI_RANGE_0164_PID	0x0164
-#define MTXORB_FTDI_RANGE_0165_PID	0x0165
-#define MTXORB_FTDI_RANGE_0166_PID	0x0166
-#define MTXORB_FTDI_RANGE_0167_PID	0x0167
-#define MTXORB_FTDI_RANGE_0168_PID	0x0168
-#define MTXORB_FTDI_RANGE_0169_PID	0x0169
-#define MTXORB_FTDI_RANGE_016A_PID	0x016A
-#define MTXORB_FTDI_RANGE_016B_PID	0x016B
-#define MTXORB_FTDI_RANGE_016C_PID	0x016C
-#define MTXORB_FTDI_RANGE_016D_PID	0x016D
-#define MTXORB_FTDI_RANGE_016E_PID	0x016E
-#define MTXORB_FTDI_RANGE_016F_PID	0x016F
-#define MTXORB_FTDI_RANGE_0170_PID	0x0170
-#define MTXORB_FTDI_RANGE_0171_PID	0x0171
-#define MTXORB_FTDI_RANGE_0172_PID	0x0172
-#define MTXORB_FTDI_RANGE_0173_PID	0x0173
-#define MTXORB_FTDI_RANGE_0174_PID	0x0174
-#define MTXORB_FTDI_RANGE_0175_PID	0x0175
-#define MTXORB_FTDI_RANGE_0176_PID	0x0176
-#define MTXORB_FTDI_RANGE_0177_PID	0x0177
-#define MTXORB_FTDI_RANGE_0178_PID	0x0178
-#define MTXORB_FTDI_RANGE_0179_PID	0x0179
-#define MTXORB_FTDI_RANGE_017A_PID	0x017A
-#define MTXORB_FTDI_RANGE_017B_PID	0x017B
-#define MTXORB_FTDI_RANGE_017C_PID	0x017C
-#define MTXORB_FTDI_RANGE_017D_PID	0x017D
-#define MTXORB_FTDI_RANGE_017E_PID	0x017E
-#define MTXORB_FTDI_RANGE_017F_PID	0x017F
-#define MTXORB_FTDI_RANGE_0180_PID	0x0180
-#define MTXORB_FTDI_RANGE_0181_PID	0x0181
-#define MTXORB_FTDI_RANGE_0182_PID	0x0182
-#define MTXORB_FTDI_RANGE_0183_PID	0x0183
-#define MTXORB_FTDI_RANGE_0184_PID	0x0184
-#define MTXORB_FTDI_RANGE_0185_PID	0x0185
-#define MTXORB_FTDI_RANGE_0186_PID	0x0186
-#define MTXORB_FTDI_RANGE_0187_PID	0x0187
-#define MTXORB_FTDI_RANGE_0188_PID	0x0188
-#define MTXORB_FTDI_RANGE_0189_PID	0x0189
-#define MTXORB_FTDI_RANGE_018A_PID	0x018A
-#define MTXORB_FTDI_RANGE_018B_PID	0x018B
-#define MTXORB_FTDI_RANGE_018C_PID	0x018C
-#define MTXORB_FTDI_RANGE_018D_PID	0x018D
-#define MTXORB_FTDI_RANGE_018E_PID	0x018E
-#define MTXORB_FTDI_RANGE_018F_PID	0x018F
-#define MTXORB_FTDI_RANGE_0190_PID	0x0190
-#define MTXORB_FTDI_RANGE_0191_PID	0x0191
-#define MTXORB_FTDI_RANGE_0192_PID	0x0192
-#define MTXORB_FTDI_RANGE_0193_PID	0x0193
-#define MTXORB_FTDI_RANGE_0194_PID	0x0194
-#define MTXORB_FTDI_RANGE_0195_PID	0x0195
-#define MTXORB_FTDI_RANGE_0196_PID	0x0196
-#define MTXORB_FTDI_RANGE_0197_PID	0x0197
-#define MTXORB_FTDI_RANGE_0198_PID	0x0198
-#define MTXORB_FTDI_RANGE_0199_PID	0x0199
-#define MTXORB_FTDI_RANGE_019A_PID	0x019A
-#define MTXORB_FTDI_RANGE_019B_PID	0x019B
-#define MTXORB_FTDI_RANGE_019C_PID	0x019C
-#define MTXORB_FTDI_RANGE_019D_PID	0x019D
-#define MTXORB_FTDI_RANGE_019E_PID	0x019E
-#define MTXORB_FTDI_RANGE_019F_PID	0x019F
-#define MTXORB_FTDI_RANGE_01A0_PID	0x01A0
-#define MTXORB_FTDI_RANGE_01A1_PID	0x01A1
-#define MTXORB_FTDI_RANGE_01A2_PID	0x01A2
-#define MTXORB_FTDI_RANGE_01A3_PID	0x01A3
-#define MTXORB_FTDI_RANGE_01A4_PID	0x01A4
-#define MTXORB_FTDI_RANGE_01A5_PID	0x01A5
-#define MTXORB_FTDI_RANGE_01A6_PID	0x01A6
-#define MTXORB_FTDI_RANGE_01A7_PID	0x01A7
-#define MTXORB_FTDI_RANGE_01A8_PID	0x01A8
-#define MTXORB_FTDI_RANGE_01A9_PID	0x01A9
-#define MTXORB_FTDI_RANGE_01AA_PID	0x01AA
-#define MTXORB_FTDI_RANGE_01AB_PID	0x01AB
-#define MTXORB_FTDI_RANGE_01AC_PID	0x01AC
-#define MTXORB_FTDI_RANGE_01AD_PID	0x01AD
-#define MTXORB_FTDI_RANGE_01AE_PID	0x01AE
-#define MTXORB_FTDI_RANGE_01AF_PID	0x01AF
-#define MTXORB_FTDI_RANGE_01B0_PID	0x01B0
-#define MTXORB_FTDI_RANGE_01B1_PID	0x01B1
-#define MTXORB_FTDI_RANGE_01B2_PID	0x01B2
-#define MTXORB_FTDI_RANGE_01B3_PID	0x01B3
-#define MTXORB_FTDI_RANGE_01B4_PID	0x01B4
-#define MTXORB_FTDI_RANGE_01B5_PID	0x01B5
-#define MTXORB_FTDI_RANGE_01B6_PID	0x01B6
-#define MTXORB_FTDI_RANGE_01B7_PID	0x01B7
-#define MTXORB_FTDI_RANGE_01B8_PID	0x01B8
-#define MTXORB_FTDI_RANGE_01B9_PID	0x01B9
-#define MTXORB_FTDI_RANGE_01BA_PID	0x01BA
-#define MTXORB_FTDI_RANGE_01BB_PID	0x01BB
-#define MTXORB_FTDI_RANGE_01BC_PID	0x01BC
-#define MTXORB_FTDI_RANGE_01BD_PID	0x01BD
-#define MTXORB_FTDI_RANGE_01BE_PID	0x01BE
-#define MTXORB_FTDI_RANGE_01BF_PID	0x01BF
-#define MTXORB_FTDI_RANGE_01C0_PID	0x01C0
-#define MTXORB_FTDI_RANGE_01C1_PID	0x01C1
-#define MTXORB_FTDI_RANGE_01C2_PID	0x01C2
-#define MTXORB_FTDI_RANGE_01C3_PID	0x01C3
-#define MTXORB_FTDI_RANGE_01C4_PID	0x01C4
-#define MTXORB_FTDI_RANGE_01C5_PID	0x01C5
-#define MTXORB_FTDI_RANGE_01C6_PID	0x01C6
-#define MTXORB_FTDI_RANGE_01C7_PID	0x01C7
-#define MTXORB_FTDI_RANGE_01C8_PID	0x01C8
-#define MTXORB_FTDI_RANGE_01C9_PID	0x01C9
-#define MTXORB_FTDI_RANGE_01CA_PID	0x01CA
-#define MTXORB_FTDI_RANGE_01CB_PID	0x01CB
-#define MTXORB_FTDI_RANGE_01CC_PID	0x01CC
-#define MTXORB_FTDI_RANGE_01CD_PID	0x01CD
-#define MTXORB_FTDI_RANGE_01CE_PID	0x01CE
-#define MTXORB_FTDI_RANGE_01CF_PID	0x01CF
-#define MTXORB_FTDI_RANGE_01D0_PID	0x01D0
-#define MTXORB_FTDI_RANGE_01D1_PID	0x01D1
-#define MTXORB_FTDI_RANGE_01D2_PID	0x01D2
-#define MTXORB_FTDI_RANGE_01D3_PID	0x01D3
-#define MTXORB_FTDI_RANGE_01D4_PID	0x01D4
-#define MTXORB_FTDI_RANGE_01D5_PID	0x01D5
-#define MTXORB_FTDI_RANGE_01D6_PID	0x01D6
-#define MTXORB_FTDI_RANGE_01D7_PID	0x01D7
-#define MTXORB_FTDI_RANGE_01D8_PID	0x01D8
-#define MTXORB_FTDI_RANGE_01D9_PID	0x01D9
-#define MTXORB_FTDI_RANGE_01DA_PID	0x01DA
-#define MTXORB_FTDI_RANGE_01DB_PID	0x01DB
-#define MTXORB_FTDI_RANGE_01DC_PID	0x01DC
-#define MTXORB_FTDI_RANGE_01DD_PID	0x01DD
-#define MTXORB_FTDI_RANGE_01DE_PID	0x01DE
-#define MTXORB_FTDI_RANGE_01DF_PID	0x01DF
-#define MTXORB_FTDI_RANGE_01E0_PID	0x01E0
-#define MTXORB_FTDI_RANGE_01E1_PID	0x01E1
-#define MTXORB_FTDI_RANGE_01E2_PID	0x01E2
-#define MTXORB_FTDI_RANGE_01E3_PID	0x01E3
-#define MTXORB_FTDI_RANGE_01E4_PID	0x01E4
-#define MTXORB_FTDI_RANGE_01E5_PID	0x01E5
-#define MTXORB_FTDI_RANGE_01E6_PID	0x01E6
-#define MTXORB_FTDI_RANGE_01E7_PID	0x01E7
-#define MTXORB_FTDI_RANGE_01E8_PID	0x01E8
-#define MTXORB_FTDI_RANGE_01E9_PID	0x01E9
-#define MTXORB_FTDI_RANGE_01EA_PID	0x01EA
-#define MTXORB_FTDI_RANGE_01EB_PID	0x01EB
-#define MTXORB_FTDI_RANGE_01EC_PID	0x01EC
-#define MTXORB_FTDI_RANGE_01ED_PID	0x01ED
-#define MTXORB_FTDI_RANGE_01EE_PID	0x01EE
-#define MTXORB_FTDI_RANGE_01EF_PID	0x01EF
-#define MTXORB_FTDI_RANGE_01F0_PID	0x01F0
-#define MTXORB_FTDI_RANGE_01F1_PID	0x01F1
-#define MTXORB_FTDI_RANGE_01F2_PID	0x01F2
-#define MTXORB_FTDI_RANGE_01F3_PID	0x01F3
-#define MTXORB_FTDI_RANGE_01F4_PID	0x01F4
-#define MTXORB_FTDI_RANGE_01F5_PID	0x01F5
-#define MTXORB_FTDI_RANGE_01F6_PID	0x01F6
-#define MTXORB_FTDI_RANGE_01F7_PID	0x01F7
-#define MTXORB_FTDI_RANGE_01F8_PID	0x01F8
-#define MTXORB_FTDI_RANGE_01F9_PID	0x01F9
-#define MTXORB_FTDI_RANGE_01FA_PID	0x01FA
-#define MTXORB_FTDI_RANGE_01FB_PID	0x01FB
-#define MTXORB_FTDI_RANGE_01FC_PID	0x01FC
-#define MTXORB_FTDI_RANGE_01FD_PID	0x01FD
-#define MTXORB_FTDI_RANGE_01FE_PID	0x01FE
-#define MTXORB_FTDI_RANGE_01FF_PID	0x01FF
-
-
-
-/* Interbiometrics USB I/O Board */
-/* Developed for Interbiometrics by Rudolf Gugler */
-#define INTERBIOMETRICS_VID              0x1209
-#define INTERBIOMETRICS_IOBOARD_PID      0x1002
-#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
-
-/*
- * The following are the values for the Perle Systems
- * UltraPort USB serial converters
- */
-#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0	/* Perle UltraPort Product Id */
-
-/*
- * The following are the values for the Sealevel SeaLINK+ adapters.
- * (Original list sent by Tuan Hoang.  Ian Abbott renamed the macros and
- * removed some PIDs that don't seem to match any existing products.)
- */
-#define SEALEVEL_VID		0x0c52	/* Sealevel Vendor ID */
-#define SEALEVEL_2101_PID	0x2101	/* SeaLINK+232 (2101/2105) */
-#define SEALEVEL_2102_PID	0x2102	/* SeaLINK+485 (2102) */
-#define SEALEVEL_2103_PID	0x2103	/* SeaLINK+232I (2103) */
-#define SEALEVEL_2104_PID	0x2104	/* SeaLINK+485I (2104) */
-#define SEALEVEL_2106_PID	0x9020	/* SeaLINK+422 (2106) */
-#define SEALEVEL_2201_1_PID	0x2211	/* SeaPORT+2/232 (2201) Port 1 */
-#define SEALEVEL_2201_2_PID	0x2221	/* SeaPORT+2/232 (2201) Port 2 */
-#define SEALEVEL_2202_1_PID	0x2212	/* SeaPORT+2/485 (2202) Port 1 */
-#define SEALEVEL_2202_2_PID	0x2222	/* SeaPORT+2/485 (2202) Port 2 */
-#define SEALEVEL_2203_1_PID	0x2213	/* SeaPORT+2 (2203) Port 1 */
-#define SEALEVEL_2203_2_PID	0x2223	/* SeaPORT+2 (2203) Port 2 */
-#define SEALEVEL_2401_1_PID	0x2411	/* SeaPORT+4/232 (2401) Port 1 */
-#define SEALEVEL_2401_2_PID	0x2421	/* SeaPORT+4/232 (2401) Port 2 */
-#define SEALEVEL_2401_3_PID	0x2431	/* SeaPORT+4/232 (2401) Port 3 */
-#define SEALEVEL_2401_4_PID	0x2441	/* SeaPORT+4/232 (2401) Port 4 */
-#define SEALEVEL_2402_1_PID	0x2412	/* SeaPORT+4/485 (2402) Port 1 */
-#define SEALEVEL_2402_2_PID	0x2422	/* SeaPORT+4/485 (2402) Port 2 */
-#define SEALEVEL_2402_3_PID	0x2432	/* SeaPORT+4/485 (2402) Port 3 */
-#define SEALEVEL_2402_4_PID	0x2442	/* SeaPORT+4/485 (2402) Port 4 */
-#define SEALEVEL_2403_1_PID	0x2413	/* SeaPORT+4 (2403) Port 1 */
-#define SEALEVEL_2403_2_PID	0x2423	/* SeaPORT+4 (2403) Port 2 */
-#define SEALEVEL_2403_3_PID	0x2433	/* SeaPORT+4 (2403) Port 3 */
-#define SEALEVEL_2403_4_PID	0x2443	/* SeaPORT+4 (2403) Port 4 */
-#define SEALEVEL_2801_1_PID	0X2811	/* SeaLINK+8/232 (2801) Port 1 */
-#define SEALEVEL_2801_2_PID	0X2821	/* SeaLINK+8/232 (2801) Port 2 */
-#define SEALEVEL_2801_3_PID	0X2831	/* SeaLINK+8/232 (2801) Port 3 */
-#define SEALEVEL_2801_4_PID	0X2841	/* SeaLINK+8/232 (2801) Port 4 */
-#define SEALEVEL_2801_5_PID	0X2851	/* SeaLINK+8/232 (2801) Port 5 */
-#define SEALEVEL_2801_6_PID	0X2861	/* SeaLINK+8/232 (2801) Port 6 */
-#define SEALEVEL_2801_7_PID	0X2871	/* SeaLINK+8/232 (2801) Port 7 */
-#define SEALEVEL_2801_8_PID	0X2881	/* SeaLINK+8/232 (2801) Port 8 */
-#define SEALEVEL_2802_1_PID	0X2812	/* SeaLINK+8/485 (2802) Port 1 */
-#define SEALEVEL_2802_2_PID	0X2822	/* SeaLINK+8/485 (2802) Port 2 */
-#define SEALEVEL_2802_3_PID	0X2832	/* SeaLINK+8/485 (2802) Port 3 */
-#define SEALEVEL_2802_4_PID	0X2842	/* SeaLINK+8/485 (2802) Port 4 */
-#define SEALEVEL_2802_5_PID	0X2852	/* SeaLINK+8/485 (2802) Port 5 */
-#define SEALEVEL_2802_6_PID	0X2862	/* SeaLINK+8/485 (2802) Port 6 */
-#define SEALEVEL_2802_7_PID	0X2872	/* SeaLINK+8/485 (2802) Port 7 */
-#define SEALEVEL_2802_8_PID	0X2882	/* SeaLINK+8/485 (2802) Port 8 */
-#define SEALEVEL_2803_1_PID	0X2813	/* SeaLINK+8 (2803) Port 1 */
-#define SEALEVEL_2803_2_PID	0X2823 	/* SeaLINK+8 (2803) Port 2 */
-#define SEALEVEL_2803_3_PID	0X2833 	/* SeaLINK+8 (2803) Port 3 */
-#define SEALEVEL_2803_4_PID	0X2843 	/* SeaLINK+8 (2803) Port 4 */
-#define SEALEVEL_2803_5_PID	0X2853 	/* SeaLINK+8 (2803) Port 5 */
-#define SEALEVEL_2803_6_PID	0X2863 	/* SeaLINK+8 (2803) Port 6 */
-#define SEALEVEL_2803_7_PID	0X2873 	/* SeaLINK+8 (2803) Port 7 */
-#define SEALEVEL_2803_8_PID	0X2883 	/* SeaLINK+8 (2803) Port 8 */
-
-/*
- * The following are the values for two KOBIL chipcard terminals.
- */
-#define KOBIL_VID		0x0d46	/* KOBIL Vendor ID */
-#define KOBIL_CONV_B1_PID	0x2020	/* KOBIL Konverter for B1 */
-#define KOBIL_CONV_KAAN_PID	0x2021	/* KOBIL_Konverter for KAAN */
-
-/*
- * Icom ID-1 digital transceiver
- */
-
-#define ICOM_ID1_VID            0x0C26
-#define ICOM_ID1_PID            0x0004
-
-/*
- * ASK.fr devices
- */
-#define FTDI_ASK_RDR400_PID	0xC991	/* ASK RDR 400 series card reader */
-
-/*
- * FTDI USB UART chips used in construction projects from the
- * Elektor Electronics magazine (http://elektor-electronics.co.uk)
- */
-#define ELEKTOR_VID		0x0C7D
-#define ELEKTOR_FT323R_PID	0x0005	/* RFID-Reader, issue 09-2006 */
-
-/*
- * DSS-20 Sync Station for Sony Ericsson P800
- */
-#define FTDI_DSS20_PID          0xFC82
-
-/*
- * Home Electronics (www.home-electro.com) USB gadgets
- */
-#define FTDI_HE_TIRA1_PID	0xFA78	/* Tira-1 IR transceiver */
-
-/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
-/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
-#define FTDI_USB_UIRT_PID	0xF850	/* Product Id */
-
-/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
-
-#define FTDI_TNC_X_PID		0xEBE0
-
-/*
- * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
- * All of these devices use FTDI's vendor ID (0x0403).
- *
- * The previously included PID for the UO 100 module was incorrect.
- * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
- *
- * Armin Laeuger originally sent the PID for the UM 100 module.
- */
-#define FTDI_R2000KU_TRUE_RNG	0xFB80  /* R2000KU TRUE RNG */
-#define FTDI_ELV_UR100_PID	0xFB58	/* USB-RS232-Umsetzer (UR 100) */
-#define FTDI_ELV_UM100_PID	0xFB5A	/* USB-Modul UM 100 */
-#define FTDI_ELV_UO100_PID	0xFB5B	/* USB-Modul UO 100 */
-#define FTDI_ELV_ALC8500_PID	0xF06E	/* ALC 8500 Expert */
-/* Additional ELV PIDs that default to using the FTDI D2XX drivers on
- * MS Windows, rather than the FTDI Virtual Com Port drivers.
- * Maybe these will be easier to use with the libftdi/libusb user-space
- * drivers, or possibly the Comedi drivers in some cases. */
-#define FTDI_ELV_CLI7000_PID	0xFB59	/* Computer-Light-Interface (CLI 7000) */
-#define FTDI_ELV_PPS7330_PID	0xFB5C	/* Processor-Power-Supply (PPS 7330) */
-#define FTDI_ELV_TFM100_PID	0xFB5D	/* Temperartur-Feuchte Messgeraet (TFM 100) */
-#define FTDI_ELV_UDF77_PID	0xFB5E	/* USB DCF Funkurh (UDF 77) */
-#define FTDI_ELV_UIO88_PID	0xFB5F	/* USB-I/O Interface (UIO 88) */
-#define FTDI_ELV_UAD8_PID	0xF068	/* USB-AD-Wandler (UAD 8) */
-#define FTDI_ELV_UDA7_PID	0xF069	/* USB-DA-Wandler (UDA 7) */
-#define FTDI_ELV_USI2_PID	0xF06A	/* USB-Schrittmotoren-Interface (USI 2) */
-#define FTDI_ELV_T1100_PID	0xF06B	/* Thermometer (T 1100) */
-#define FTDI_ELV_PCD200_PID	0xF06C	/* PC-Datenlogger (PCD 200) */
-#define FTDI_ELV_ULA200_PID	0xF06D	/* USB-LCD-Ansteuerung (ULA 200) */
-#define FTDI_ELV_FHZ1000PC_PID	0xF06F	/* FHZ 1000 PC */
-#define FTDI_ELV_CSI8_PID	0xE0F0	/* Computer-Schalt-Interface (CSI 8) */
-#define FTDI_ELV_EM1000DL_PID	0xE0F1	/* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
-#define FTDI_ELV_PCK100_PID	0xE0F2	/* PC-Kabeltester (PCK 100) */
-#define FTDI_ELV_RFP500_PID	0xE0F3	/* HF-Leistungsmesser (RFP 500) */
-#define FTDI_ELV_FS20SIG_PID	0xE0F4	/* Signalgeber (FS 20 SIG) */
-#define FTDI_ELV_WS300PC_PID	0xE0F6	/* PC-Wetterstation (WS 300 PC) */
-#define FTDI_ELV_FHZ1300PC_PID	0xE0E8	/* FHZ 1300 PC */
-#define FTDI_ELV_WS500_PID	0xE0E9	/* PC-Wetterstation (WS 500) */
-#define FTDI_ELV_HS485_PID	0xE0EA	/* USB to RS-485 adapter */
-#define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Engery monitor EM 1010 PC */
-#define FTDI_PHI_FISCO_PID      0xE40B  /* PHI Fisco USB to Serial cable */
-
-/*
- * Definitions for ID TECH (www.idt-net.com) devices
- */
-#define IDTECH_VID		0x0ACD	/* ID TECH Vendor ID */
-#define IDTECH_IDT1221U_PID	0x0300	/* IDT1221U USB to RS-232 adapter */
-
-/*
- * Definitions for Omnidirectional Control Technology, Inc. devices
- */
-#define OCT_VID			0x0B39	/* OCT vendor ID */
-/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
-/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
-/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
-#define OCT_US101_PID		0x0421	/* OCT US101 USB to RS-232 */
-
-/* an infrared receiver for user access control with IR tags */
-#define FTDI_PIEGROUP_PID	0xF208	/* Product Id */
-
-/*
- * Definitions for Artemis astronomical USB based cameras
- * Check it at http://www.artemisccd.co.uk/
- */
-#define FTDI_ARTEMIS_PID	0xDF28	/* All Artemis Cameras */
-
-/*
- * Definitions for ATIK Instruments astronomical USB based cameras
- * Check it at http://www.atik-instruments.com/
- */
-#define FTDI_ATIK_ATK16_PID	0xDF30	/* ATIK ATK-16 Grayscale Camera */
-#define FTDI_ATIK_ATK16C_PID	0xDF32	/* ATIK ATK-16C Colour Camera */
-#define FTDI_ATIK_ATK16HR_PID	0xDF31	/* ATIK ATK-16HR Grayscale Camera */
-#define FTDI_ATIK_ATK16HRC_PID	0xDF33	/* ATIK ATK-16HRC Colour Camera */
-#define FTDI_ATIK_ATK16IC_PID   0xDF35  /* ATIK ATK-16IC Grayscale Camera */
-
-/*
- * Protego product ids
- */
-#define PROTEGO_SPECIAL_1	0xFC70	/* special/unknown device */
-#define PROTEGO_R2X0		0xFC71	/* R200-USB TRNG unit (R210, R220, and R230) */
-#define PROTEGO_SPECIAL_3	0xFC72	/* special/unknown device */
-#define PROTEGO_SPECIAL_4	0xFC73	/* special/unknown device */
-
-/*
- * Gude Analog- und Digitalsysteme GmbH
- */
-#define FTDI_GUDEADS_E808_PID    0xE808
-#define FTDI_GUDEADS_E809_PID    0xE809
-#define FTDI_GUDEADS_E80A_PID    0xE80A
-#define FTDI_GUDEADS_E80B_PID    0xE80B
-#define FTDI_GUDEADS_E80C_PID    0xE80C
-#define FTDI_GUDEADS_E80D_PID    0xE80D
-#define FTDI_GUDEADS_E80E_PID    0xE80E
-#define FTDI_GUDEADS_E80F_PID    0xE80F
-#define FTDI_GUDEADS_E888_PID    0xE888  /* Expert ISDN Control USB */
-#define FTDI_GUDEADS_E889_PID    0xE889  /* USB RS-232 OptoBridge */
-#define FTDI_GUDEADS_E88A_PID    0xE88A
-#define FTDI_GUDEADS_E88B_PID    0xE88B
-#define FTDI_GUDEADS_E88C_PID    0xE88C
-#define FTDI_GUDEADS_E88D_PID    0xE88D
-#define FTDI_GUDEADS_E88E_PID    0xE88E
-#define FTDI_GUDEADS_E88F_PID    0xE88F
-
-/*
- * Linx Technologies product ids
- */
-#define LINX_SDMUSBQSS_PID	0xF448	/* Linx SDM-USB-QS-S */
-#define LINX_MASTERDEVEL2_PID   0xF449   /* Linx Master Development 2.0 */
-#define LINX_FUTURE_0_PID   0xF44A   /* Linx future device */
-#define LINX_FUTURE_1_PID   0xF44B   /* Linx future device */
-#define LINX_FUTURE_2_PID   0xF44C   /* Linx future device */
-
-/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */
-/* unit for PIC16's/PIC18's */
-#define FTDI_CCSICDU20_0_PID    0xF9D0
-#define FTDI_CCSICDU40_1_PID    0xF9D1
-#define FTDI_CCSMACHX_2_PID     0xF9D2
-#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
-#define FTDI_CCSICDU64_4_PID    0xF9D4
-#define FTDI_CCSPRIME8_5_PID    0xF9D5
-
-/* Inside Accesso contactless reader (http://www.insidefr.com) */
-#define INSIDE_ACCESSO		0xFAD0
-
-/*
- * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
- */
-#define INTREPID_VID		0x093C
-#define INTREPID_VALUECAN_PID	0x0601
-#define INTREPID_NEOVI_PID	0x0701
-
-/*
- * Falcom Wireless Communications GmbH
- */
-#define FALCOM_VID		0x0F94	/* Vendor Id */
-#define FALCOM_TWIST_PID	0x0001	/* Falcom Twist USB GPRS modem */
-#define FALCOM_SAMBA_PID	0x0005	/* Falcom Samba USB GPRS modem */
-
-/*
- * SUUNTO product ids
- */
-#define FTDI_SUUNTO_SPORTS_PID	0xF680	/* Suunto Sports instrument */
-
-/*
- * Oceanic product ids
- */
-#define FTDI_OCEANIC_PID	0xF460  /* Oceanic dive instrument */
-
-/*
- * TTi (Thurlby Thandar Instruments)
- */
-#define TTI_VID			0x103E	/* Vendor Id */
-#define TTI_QL355P_PID		0x03E8	/* TTi QL355P power supply */
-
-/*
- * Definitions for B&B Electronics products.
- */
-#define BANDB_VID		0x0856	/* B&B Electronics Vendor ID */
-#define BANDB_USOTL4_PID	0xAC01	/* USOTL4 Isolated RS-485 Converter */
-#define BANDB_USTL4_PID		0xAC02	/* USTL4 RS-485 Converter */
-#define BANDB_USO9ML2_PID	0xAC03	/* USO9ML2 Isolated RS-232 Converter */
-#define BANDB_USOPTL4_PID	0xAC11
-#define BANDB_USPTL4_PID	0xAC12
-#define BANDB_USO9ML2DR_2_PID	0xAC16
-#define BANDB_USO9ML2DR_PID	0xAC17
-#define BANDB_USOPTL4DR2_PID	0xAC18	/* USOPTL4R-2 2-port Isolated RS-232 Converter */
-#define BANDB_USOPTL4DR_PID	0xAC19
-#define BANDB_485USB9F_2W_PID	0xAC25
-#define BANDB_485USB9F_4W_PID	0xAC26
-#define BANDB_232USB9M_PID	0xAC27
-#define BANDB_485USBTB_2W_PID	0xAC33
-#define BANDB_485USBTB_4W_PID	0xAC34
-#define BANDB_TTL5USB9M_PID	0xAC49
-#define BANDB_TTL3USB9M_PID	0xAC50
-#define BANDB_ZZ_PROG1_USB_PID	0xBA02
-
-/*
- * RM Michaelides CANview USB (http://www.rmcan.com)
- * CAN fieldbus interface adapter, added by port GmbH www.port.de)
- * Ian Abbott changed the macro names for consistency.
- */
-#define FTDI_RM_CANVIEW_PID	0xfd60	/* Product Id */
-
-/*
- * EVER Eco Pro UPS (http://www.ever.com.pl/)
- */
-
-#define	EVER_ECO_PRO_CDS	0xe520	/* RS-232 converter */
-
-/*
- * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
- * USB-TTY activ, USB-TTY passiv.  Some PIDs are used by several devices
- * and I'm not entirely sure which are used by which.
- */
-#define FTDI_4N_GALAXY_DE_1_PID	0xF3C0
-#define FTDI_4N_GALAXY_DE_2_PID	0xF3C1
-
-/*
- * Mobility Electronics products.
- */
-#define MOBILITY_VID			0x1342
-#define MOBILITY_USB_SERIAL_PID		0x0202	/* EasiDock USB 200 serial */
-
-/*
- * microHAM product IDs (http://www.microham.com).
- * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
- * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
- * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
- */
-#define FTDI_MHAM_KW_PID 0xEEE8		/* USB-KW interface */
-#define FTDI_MHAM_YS_PID 0xEEE9		/* USB-YS interface */
-#define FTDI_MHAM_Y6_PID 0xEEEA		/* USB-Y6 interface */
-#define FTDI_MHAM_Y8_PID 0xEEEB		/* USB-Y8 interface */
-#define FTDI_MHAM_IC_PID 0xEEEC		/* USB-IC interface */
-#define FTDI_MHAM_DB9_PID 0xEEED	/* USB-DB9 interface */
-#define FTDI_MHAM_RS232_PID 0xEEEE	/* USB-RS232 interface */
-#define FTDI_MHAM_Y9_PID 0xEEEF		/* USB-Y9 interface */
-
-/*
- * Active Robots product ids.
- */
-#define FTDI_ACTIVE_ROBOTS_PID	0xE548	/* USB comms board */
-
-/*
- * Xsens Technologies BV products (http://www.xsens.com).
- */
-#define XSENS_CONVERTER_0_PID	0xD388
-#define XSENS_CONVERTER_1_PID	0xD389
-#define XSENS_CONVERTER_2_PID	0xD38A
-#define XSENS_CONVERTER_3_PID	0xD38B
-#define XSENS_CONVERTER_4_PID	0xD38C
-#define XSENS_CONVERTER_5_PID	0xD38D
-#define XSENS_CONVERTER_6_PID	0xD38E
-#define XSENS_CONVERTER_7_PID	0xD38F
-
-/*
- * Teratronik product ids.
- * Submitted by O. Wölfelschneider.
- */
-#define FTDI_TERATRONIK_VCP_PID	 0xEC88	/* Teratronik device (preferring VCP driver on windows) */
-#define FTDI_TERATRONIK_D2XX_PID 0xEC89	/* Teratronik device (preferring D2XX driver on windows) */
-
-/*
- * Evolution Robotics products (http://www.evolution.com/).
- * Submitted by Shawn M. Lavelle.
- */
-#define EVOLUTION_VID		0xDEEE	/* Vendor ID */
-#define EVOLUTION_ER1_PID	0x0300	/* ER1 Control Module */
-#define EVO_8U232AM_PID	0x02FF	/* Evolution robotics RCM2 (FT232AM)*/
-#define EVO_HYBRID_PID		0x0302	/* Evolution robotics RCM4 PID (FT232BM)*/
-#define EVO_RCM4_PID		0x0303	/* Evolution robotics RCM4 PID */
-
-/* Pyramid Computer GmbH */
-#define FTDI_PYRAMID_PID	0xE6C8	/* Pyramid Appliance Display */
-
-/*
- * NDI (www.ndigital.com) product ids
- */
-#define FTDI_NDI_HUC_PID		0xDA70	/* NDI Host USB Converter */
-#define FTDI_NDI_SPECTRA_SCU_PID	0xDA71	/* NDI Spectra SCU */
-#define FTDI_NDI_FUTURE_2_PID		0xDA72	/* NDI future device #2 */
-#define FTDI_NDI_FUTURE_3_PID		0xDA73	/* NDI future device #3 */
-#define FTDI_NDI_AURORA_SCU_PID		0xDA74	/* NDI Aurora SCU */
-
-/*
- * Posiflex inc retail equipment (http://www.posiflex.com.tw)
- */
-#define POSIFLEX_VID		0x0d3a  /* Vendor ID */
-#define POSIFLEX_PP7000_PID	0x0300  /* PP-7000II thermal printer */
-
-/*
- * Westrex International devices submitted by Cory Lee
- */
-#define FTDI_WESTREX_MODEL_777_PID	0xDC00	/* Model 777 */
-#define FTDI_WESTREX_MODEL_8900F_PID	0xDC01	/* Model 8900F */
-
-/*
- * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
- */
-#define FTDI_RRCIRKITS_LOCOBUFFER_PID	0xc7d0	/* LocoBuffer USB */
-
-/*
- * Eclo (http://www.eclo.pt/) product IDs.
- * PID 0xEA90 submitted by Martin Grill.
- */
-#define FTDI_ECLO_COM_1WIRE_PID	0xEA90	/* COM to 1-Wire USB adaptor */
-
-/*
- * Papouch products (http://www.papouch.com/)
- * Submitted by Folkert van Heusden
- */
-
-#define PAPOUCH_VID			0x5050	/* Vendor ID */
-#define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
-#define PAPOUCH_QUIDO4x4_PID		0x0900	/* Quido 4/4 Module */
-
-/*
- * ACG Identification Technologies GmbH products (http://www.acg.de/).
- * Submitted by anton -at- goto10 -dot- org.
  */
-#define FTDI_ACG_HFDUAL_PID		0xDD20	/* HF Dual ISO Reader (RFID) */
-
-/*
- * Yost Engineering, Inc. products (www.yostengineering.com).
- * PID 0xE050 submitted by Aaron Prose.
- */
-#define FTDI_YEI_SERVOCENTER31_PID	0xE050	/* YEI ServoCenter3.1 USB */
-
-/*
- * ThorLabs USB motor drivers
- */
-#define FTDI_THORLABS_PID		0xfaf0 /* ThorLabs USB motor drivers */
-
-/*
- * Testo products (http://www.testo.com/)
- * Submitted by Colin Leroy
- */
-#define TESTO_VID			0x128D
-#define TESTO_USB_INTERFACE_PID		0x0001
-
-/*
- * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
- */
-#define FTDI_GAMMA_SCOUT_PID		0xD678	/* Gamma Scout online */
-
-/*
- * Tactrix OpenPort (ECU) devices.
- * OpenPort 1.3M submitted by Donour Sizemore.
- * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
- */
-#define FTDI_TACTRIX_OPENPORT_13M_PID	0xCC48	/* OpenPort 1.3 Mitsubishi */
-#define FTDI_TACTRIX_OPENPORT_13S_PID	0xCC49	/* OpenPort 1.3 Subaru */
-#define FTDI_TACTRIX_OPENPORT_13U_PID	0xCC4A	/* OpenPort 1.3 Universal */
-
-/*
- * Telldus Technologies
- */
-#define TELLDUS_VID			0x1781	/* Vendor ID */
-#define TELLDUS_TELLSTICK_PID		0x0C30	/* RF control dongle 433 MHz using FT232RL */
-
-/*
- * IBS elektronik product ids
- * Submitted by Thomas Schleusener
- */
-#define FTDI_IBS_US485_PID	0xff38  /* IBS US485 (USB<-->RS422/485 interface) */
-#define FTDI_IBS_PICPRO_PID	0xff39  /* IBS PIC-Programmer */
-#define FTDI_IBS_PCMCIA_PID	0xff3a  /* IBS Card reader for PCMCIA SRAM-cards */
-#define FTDI_IBS_PK1_PID	0xff3b  /* IBS PK1 - Particel counter */
-#define FTDI_IBS_RS232MON_PID	0xff3c  /* IBS RS232 - Monitor */
-#define FTDI_IBS_APP70_PID	0xff3d  /* APP 70 (dust monitoring system) */
-#define FTDI_IBS_PEDO_PID	0xff3e  /* IBS PEDO-Modem (RF modem 868.35 MHz) */
-#define FTDI_IBS_PROD_PID	0xff3f  /* future device */
-
-/*
- *  MaxStream devices	www.maxstream.net
- */
-#define FTDI_MAXSTREAM_PID	0xEE18	/* Xbee PKG-U Module */
-
-/* Olimex */
-#define OLIMEX_VID			0x15BA
-#define OLIMEX_ARM_USB_OCD_PID		0x0003
-
-/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
-/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
-#define LMI_LM3S_DEVEL_BOARD_PID	0xbcd8
-#define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
-
-/* www.elsterelectricity.com Elster Unicom III Optical Probe */
-#define FTDI_ELSTER_UNICOM_PID		0xE700 /* Product Id */
-
-/*
- * The Mobility Lab (TML)
- * Submitted by Pierre Castella
- */
-#define TML_VID			0x1B91	/* Vendor ID */
-#define TML_USB_SERIAL_PID	0x0064	/* USB - Serial Converter */
-
-/* Propox devices */
-#define FTDI_PROPOX_JTAGCABLEII_PID	0xD738
-
-/* Rig Expert Ukraine devices */
-#define FTDI_REU_TINY_PID		0xED22	/* RigExpert Tiny */
-
-/* Domintell products  http://www.domintell.com */
-#define FTDI_DOMINTELL_DGQG_PID	0xEF50	/* Master */
-#define FTDI_DOMINTELL_DUSB_PID	0xEF51	/* DUSB01 module */
-
-/* Alti-2 products  http://www.alti-2.com */
-#define ALTI2_VID	0x1BC9
-#define ALTI2_N3_PID	0x6001	/* Neptune 3 */
 
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
@@ -910,86 +40,6 @@
 #define INTERFACE_C		3
 #define INTERFACE_D		4
 
-/*
- * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
- * Submitted by Harald Welte <laforge@openmoko.org>
- */
-#define	FIC_VID			0x1457
-#define	FIC_NEO1973_DEBUG_PID	0x5118
-
-/*
- * RATOC REX-USB60F
- */
-#define RATOC_VENDOR_ID		0x0584
-#define RATOC_PRODUCT_ID_USB60F	0xb020
-
-/*
- * DIEBOLD BCS SE923
- */
-#define DIEBOLD_BCS_SE923_PID	0xfb99
-
-/*
- * Atmel STK541
- */
-#define ATMEL_VID		0x03eb /* Vendor ID */
-#define STK541_PID		0x2109 /* Zigbee Controller */
-
-/*
- * Dresden Elektronic Sensor Terminal Board
- */
-#define DE_VID			0x1cf1 /* Vendor ID */
-#define STB_PID			0x0001 /* Sensor Terminal Board */
-#define WHT_PID			0x0004 /* Wireless Handheld Terminal */
-
-/*
- * Blackfin gnICE JTAG
- * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
- */
-#define ADI_VID 		0x0456
-#define ADI_GNICE_PID 		0xF000
-#define ADI_GNICEPLUS_PID 	0xF001
-
-/*
- * JETI SPECTROMETER SPECBOS 1201
- * http://www.jeti.com/products/sys/scb/scb1201.php
- */
-#define JETI_VID		0x0c6c
-#define JETI_SPC1201_PID	0x04b2
-
-/*
- * Marvell SheevaPlug
- */
-#define MARVELL_VID		0x9e88
-#define MARVELL_SHEEVAPLUG_PID	0x9e8f
-
-#define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
-
-/*
- * GN Otometrics (http://www.otometrics.com)
- * Submitted by Ville Sundberg.
- */
-#define GN_OTOMETRICS_VID	0x0c33	/* Vendor ID */
-#define AURICAL_USB_PID		0x0010	/* Aurical USB Audiometer */
-
-/*
- * Bayer Ascensia Contour blood glucose meter USB-converter cable.
- * http://winglucofacts.com/cables/
- */
-#define BAYER_VID                      0x1A79
-#define BAYER_CONTOUR_CABLE_PID        0x6001
-
-/*
- * Marvell OpenRD Base, Client
- * http://www.open-rd.org
- * OpenRD Base, Client use VID 0x0403
- */
-#define MARVELL_OPENRD_PID	0x9e90
-
-/*
- * Hameg HO820 and HO870 interface (using VID 0x0403)
- */
-#define        HAMEG_HO820_PID         0xed74
-#define        HAMEG_HO870_PID         0xed71
 
 /*
  *   BmRequestType:  1100 0000b
@@ -1504,4 +554,3 @@ typedef enum {
  * B2..7	Length of message - (not including Byte 0)
  *
  */
-