Merge commit 'v3.3-rc1' into stable/for-linus-fixes-3.3

* commit 'v3.3-rc1': (9775 commits)
  Linux 3.3-rc1
  x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
  qnx4: don't leak ->BitMap on late failure exits
  qnx4: reduce the insane nesting in qnx4_checkroot()
  qnx4: di_fname is an array, for crying out loud...
  KEYS: Permit key_serial() to be called with a const key pointer
  keys: fix user_defined key sparse messages
  ima: fix cred sparse warning
  uml: fix compile for x86-64
  MPILIB: Add a missing ENOMEM check
  tpm: fix (ACPI S3) suspend regression
  nvme: fix merge error due to change of 'make_request_fn' fn type
  xen: using EXPORT_SYMBOL requires including export.h
  gpio: tps65910: Use correct offset for gpio initialization
  acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
  intel_idle: Split up and provide per CPU initialization func
  ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
  tg3: Fix single-vector MSI-X code
  openvswitch: Fix multipart datapath dumps.
  ipv6: fix per device IP snmp counters
  ...

1 files changed, 1 insertions, 59 deletions

diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 5b073bcc807b..7e0acf5c8e38 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -14,57 +14,6 @@
  *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
- *
- * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com)
- *	Upgrade to full working driver
- *
- * (05/30/2001) gkh
- *	switched from using spinlock to a semaphore, which fixes lots of
- *	problems.
- *
- * (04/08/2001) gb
- *	Identify version on module load.
- *
- * 2001_Mar_19 gkh
- *	Fixed MOD_INC and MOD_DEC logic, the ability to open a port more
- *	than once, and the got the proper usb_device_id table entries so
- *	the driver works again.
- *
- * (11/01/2000) Adam J. Richter
- *	usb_device_id table support
- *
- * (10/05/2000) gkh
- *	Fixed bug with urb->dev not being set properly, now that the usb
- *	core needs it.
- *
- * (10/03/2000) smd
- *	firmware is improved to guard against crap sent to device
- *	firmware now replies CMD_FAILURE on bad things
- *	read_callback fix you provided for private info struct
- *	command_finished now indicates success or fail
- *	setup_port struct now packed to avoid gcc padding
- *	firmware uses 1 based port numbering, driver now handles that
- *
- * (09/11/2000) gkh
- *	Removed DEBUG #ifdefs with call to usb_serial_debug_data
- *
- * (07/19/2000) gkh
- *	Added module_init and module_exit functions to handle the fact that this
- *	driver is a loadable module now.
- *	Fixed bug with port->minor that was found by Al Borchers
- *
- * (07/04/2000) gkh
- *	Added support for port settings. Baud rate can now be changed. Line
- *	signals are not transferred to and from the tty layer yet, but things
- *	seem to be working well now.
- *
- * (05/04/2000) gkh
- *	First cut at open and close commands. Data can flow through the ports at
- *	default speeds now.
- *
- * (03/26/2000) gkh
- *	Split driver up into device specific pieces.
- *
  */
 
 #include <linux/kernel.h>
@@ -87,7 +36,7 @@
 #include <linux/ihex.h>
 #include "whiteheat.h"			/* WhiteHEAT specific commands */
 
-static int debug;
+static bool debug;
 
 #ifndef CMSPAR
 #define CMSPAR 0
@@ -753,7 +702,6 @@ static void whiteheat_close(struct usb_serial_port *port)
 static int whiteheat_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
-	struct usb_serial *serial = port->serial;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	struct whiteheat_urb_wrap *wrap;
 	struct urb *urb;
@@ -789,7 +737,6 @@ static int whiteheat_write(struct tty_struct *tty,
 		usb_serial_debug_data(debug, &port->dev,
 				__func__, bytes, urb->transfer_buffer);
 
-		urb->dev = serial->dev;
 		urb->transfer_buffer_length = bytes;
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result) {
@@ -1035,7 +982,6 @@ static void command_port_read_callback(struct urb *urb)
 		dbg("%s - bad reply from firmware", __func__);
 
 	/* Continue trying to always read */
-	command_port->read_urb->dev = command_port->serial->dev;
 	result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
 	if (result)
 		dbg("%s - failed resubmitting read urb, error %d",
@@ -1141,7 +1087,6 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command,
 	transfer_buffer[0] = command;
 	memcpy(&transfer_buffer[1], data, datasize);
 	command_port->write_urb->transfer_buffer_length = datasize + 1;
-	command_port->write_urb->dev = port->serial->dev;
 	retval = usb_submit_urb(command_port->write_urb, GFP_NOIO);
 	if (retval) {
 		dbg("%s - submit urb failed", __func__);
@@ -1362,7 +1307,6 @@ static int start_command_port(struct usb_serial *serial)
 		/* Work around HCD bugs */
 		usb_clear_halt(serial->dev, command_port->read_urb->pipe);
 
-		command_port->read_urb->dev = serial->dev;
 		retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
 		if (retval) {
 			dev_err(&serial->dev->dev,
@@ -1410,7 +1354,6 @@ static int start_port_read(struct usb_serial_port *port)
 		list_del(tmp);
 		wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 		urb = wrap->urb;
-		urb->dev = port->serial->dev;
 		spin_unlock_irqrestore(&info->lock, flags);
 		retval = usb_submit_urb(urb, GFP_KERNEL);
 		if (retval) {
@@ -1490,7 +1433,6 @@ static void rx_data_softint(struct work_struct *work)
 			sent += tty_insert_flip_string(tty,
 				urb->transfer_buffer, urb->actual_length);
 
-		urb->dev = port->serial->dev;
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result) {
 			dev_err(&port->dev,