Merge tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB merge for 3.4-rc1 from Greg KH:
 "Here's the big USB merge for the 3.4-rc1 merge window.

  Lots of gadget driver reworks here, driver updates, xhci changes, some
  new drivers added, usb-serial core reworking to fix some bugs, and
  other various minor things.

  There are some patches touching arch code, but they have all been
  acked by the various arch maintainers."

* tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (302 commits)
  net: qmi_wwan: add support for ZTE MF820D
  USB: option: add ZTE MF820D
  usb: gadget: f_fs: Remove lock is held before freeing checks
  USB: option: make interface blacklist work again
  usb/ub: deprecate & schedule for removal the "Low Performance USB Block" driver
  USB: ohci-pxa27x: add clk_prepare/clk_unprepare calls
  USB: use generic platform driver on ath79
  USB: EHCI: Add a generic platform device driver
  USB: OHCI: Add a generic platform device driver
  USB: ftdi_sio: new PID: LUMEL PD12
  USB: ftdi_sio: add support for FT-X series devices
  USB: serial: mos7840: Fixed MCS7820 device attach problem
  usb: Don't make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT.
  usb gadget: fix a section mismatch when compiling g_ffs with CONFIG_USB_FUNCTIONFS_ETH
  USB: ohci-nxp: Remove i2c_write(), use smbus
  USB: ohci-nxp: Support for LPC32xx
  USB: ohci-nxp: Rename symbols from pnx4008 to nxp
  USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxp
  usb: gadget: Kconfig: fix typo for 'different'
  usb: dwc3: pci: fix another failure path in dwc3_pci_probe()
  ...

57 files changed, 1376 insertions, 1543 deletions

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 677f577c0243..7141d6599060 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -238,6 +238,15 @@ config USB_SERIAL_EDGEPORT_TI
 	  To compile this driver as a module, choose M here: the
 	  module will be called io_ti.
 
+config USB_SERIAL_F81232
+	tristate "USB Fintek F81232 Single Port Serial Driver"
+	help
+	  Say Y here if you want to use the Fintek F81232 single
+	  port usb to serial adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called f81232.
+
 config USB_SERIAL_GARMIN
        tristate "USB Garmin GPS driver"
        help
@@ -417,6 +426,14 @@ config USB_SERIAL_MCT_U232
 	  To compile this driver as a module, choose M here: the
 	  module will be called mct_u232.
 
+config USB_SERIAL_METRO
+	tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
+	---help---
+	  Say Y here if you want to use a USB POS Metrologic barcode scanner.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called metro-usb.
+
 config USB_SERIAL_MOS7720
 	tristate "USB Moschip 7720 Serial Driver"
 	---help---
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 9e536eefb32c..07f198ee0486 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_USB_SERIAL_DIGI_ACCELEPORT)	+= digi_acceleport.o
 obj-$(CONFIG_USB_SERIAL_EDGEPORT)		+= io_edgeport.o
 obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI)		+= io_ti.o
 obj-$(CONFIG_USB_SERIAL_EMPEG)			+= empeg.o
+obj-$(CONFIG_USB_SERIAL_F81232)			+= f81232.o
 obj-$(CONFIG_USB_SERIAL_FTDI_SIO)		+= ftdi_sio.o
 obj-$(CONFIG_USB_SERIAL_FUNSOFT)		+= funsoft.o
 obj-$(CONFIG_USB_SERIAL_GARMIN)			+= garmin_gps.o
@@ -36,6 +37,7 @@ obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA)		+= keyspan_pda.o
 obj-$(CONFIG_USB_SERIAL_KLSI)			+= kl5kusb105.o
 obj-$(CONFIG_USB_SERIAL_KOBIL_SCT)		+= kobil_sct.o
 obj-$(CONFIG_USB_SERIAL_MCT_U232)		+= mct_u232.o
+obj-$(CONFIG_USB_SERIAL_METRO)			+= metro-usb.o
 obj-$(CONFIG_USB_SERIAL_MOS7720)		+= mos7720.o
 obj-$(CONFIG_USB_SERIAL_MOS7840)		+= mos7840.o
 obj-$(CONFIG_USB_SERIAL_MOTOROLA)		+= moto_modem.o
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 123bf9155339..eec4fb9a35c1 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -175,7 +175,6 @@ static struct usb_driver aircable_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id =	1,
 };
 
 static struct usb_serial_driver aircable_device = {
@@ -183,7 +182,6 @@ static struct usb_serial_driver aircable_device = {
 		.owner =	THIS_MODULE,
 		.name =		"aircable",
 	},
-	.usb_driver = 		&aircable_driver,
 	.id_table = 		id_table,
 	.num_ports =		1,
 	.bulk_out_size =	HCI_COMPLETE_FRAME,
@@ -194,36 +192,16 @@ static struct usb_serial_driver aircable_device = {
 	.unthrottle =		usb_serial_generic_unthrottle,
 };
 
-static int __init aircable_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&aircable_device);
-	if (retval)
-		goto failed_serial_register;
-	retval = usb_register(&aircable_driver);
-	if (retval)
-		goto failed_usb_register;
-	return 0;
-
-failed_usb_register:
-	usb_serial_deregister(&aircable_device);
-failed_serial_register:
-	return retval;
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&aircable_device, NULL
+};
 
-static void __exit aircable_exit(void)
-{
-	usb_deregister(&aircable_driver);
-	usb_serial_deregister(&aircable_device);
-}
+module_usb_serial_driver(aircable_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
-module_init(aircable_init);
-module_exit(aircable_exit);
-
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 69328dcfd91a..f99f47100dd8 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -719,7 +719,6 @@ static struct usb_driver ark3116_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id =	1,
 };
 
 static struct usb_serial_driver ark3116_device = {
@@ -728,7 +727,6 @@ static struct usb_serial_driver ark3116_device = {
 		.name =		"ark3116",
 	},
 	.id_table =		id_table,
-	.usb_driver =		&ark3116_driver,
 	.num_ports =		1,
 	.attach =		ark3116_attach,
 	.release =		ark3116_release,
@@ -745,32 +743,12 @@ static struct usb_serial_driver ark3116_device = {
 	.process_read_urb =	ark3116_process_read_urb,
 };
 
-static int __init ark3116_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&ark3116_device);
-	if (retval)
-		return retval;
-	retval = usb_register(&ark3116_driver);
-	if (retval == 0) {
-		printk(KERN_INFO "%s:"
-		       DRIVER_VERSION ":"
-		       DRIVER_DESC "\n",
-		       KBUILD_MODNAME);
-	} else
-		usb_serial_deregister(&ark3116_device);
-	return retval;
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ark3116_device, NULL
+};
 
-static void __exit ark3116_exit(void)
-{
-	usb_deregister(&ark3116_driver);
-	usb_serial_deregister(&ark3116_device);
-}
+module_usb_serial_driver(ark3116_driver, serial_drivers);
 
-module_init(ark3116_init);
-module_exit(ark3116_exit);
 MODULE_LICENSE("GPL");
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 29ffeb6279c7..a52e0d2cec31 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -78,7 +78,6 @@ static struct usb_driver belkin_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table_combined,
-	.no_dynamic_id =	1,
 };
 
 /* All of the device info needed for the serial converters */
@@ -88,7 +87,6 @@ static struct usb_serial_driver belkin_device = {
 		.name =		"belkin",
 	},
 	.description =		"Belkin / Peracom / GoHubs USB Serial Adapter",
-	.usb_driver =		&belkin_driver,
 	.id_table =		id_table_combined,
 	.num_ports =		1,
 	.open =			belkin_sa_open,
@@ -103,6 +101,10 @@ static struct usb_serial_driver belkin_device = {
 	.release =		belkin_sa_release,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&belkin_device, NULL
+};
+
 struct belkin_sa_private {
 	spinlock_t		lock;
 	unsigned long		control_state;
@@ -522,34 +524,7 @@ exit:
 	return retval;
 }
 
-
-static int __init belkin_sa_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&belkin_device);
-	if (retval)
-		goto failed_usb_serial_register;
-	retval = usb_register(&belkin_driver);
-	if (retval)
-		goto failed_usb_register;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&belkin_device);
-failed_usb_serial_register:
-	return retval;
-}
-
-static void __exit belkin_sa_exit (void)
-{
-	usb_deregister(&belkin_driver);
-	usb_serial_deregister(&belkin_device);
-}
-
-
-module_init(belkin_sa_init);
-module_exit(belkin_sa_exit);
+module_usb_serial_driver(belkin_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 5e53cc59e652..aaab32db31d0 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -625,7 +625,6 @@ static struct usb_driver ch341_driver = {
 	.resume		= usb_serial_resume,
 	.reset_resume	= ch341_reset_resume,
 	.id_table	= id_table,
-	.no_dynamic_id	= 1,
 	.supports_autosuspend =	1,
 };
 
@@ -635,7 +634,6 @@ static struct usb_serial_driver ch341_device = {
 		.name	= "ch341-uart",
 	},
 	.id_table          = id_table,
-	.usb_driver        = &ch341_driver,
 	.num_ports         = 1,
 	.open              = ch341_open,
 	.dtr_rts	   = ch341_dtr_rts,
@@ -650,30 +648,13 @@ static struct usb_serial_driver ch341_device = {
 	.attach            = ch341_attach,
 };
 
-static int __init ch341_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&ch341_device);
-	if (retval)
-		return retval;
-	retval = usb_register(&ch341_driver);
-	if (retval)
-		usb_serial_deregister(&ch341_device);
-	return retval;
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ch341_device, NULL
+};
 
-static void __exit ch341_exit(void)
-{
-	usb_deregister(&ch341_driver);
-	usb_serial_deregister(&ch341_device);
-}
+module_usb_serial_driver(ch341_driver, serial_drivers);
 
-module_init(ch341_init);
-module_exit(ch341_exit);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
-
-/* EOF ch341.c */
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 08a5575724cd..0310e2df59f5 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -49,6 +49,7 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
 		unsigned int, unsigned int);
 static void cp210x_break_ctl(struct tty_struct *, int);
 static int cp210x_startup(struct usb_serial *);
+static void cp210x_release(struct usb_serial *);
 static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
 
 static bool debug;
@@ -121,6 +122,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
+	{ USB_DEVICE(0x10C4, 0xEA80) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
 	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
 	{ USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
@@ -149,12 +152,15 @@ static const struct usb_device_id id_table[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
+struct cp210x_port_private {
+	__u8			bInterfaceNumber;
+};
+
 static struct usb_driver cp210x_driver = {
 	.name		= "cp210x",
 	.probe		= usb_serial_probe,
 	.disconnect	= usb_serial_disconnect,
 	.id_table	= id_table,
-	.no_dynamic_id	= 	1,
 };
 
 static struct usb_serial_driver cp210x_device = {
@@ -162,7 +168,6 @@ static struct usb_serial_driver cp210x_device = {
 		.owner =	THIS_MODULE,
 		.name = 	"cp210x",
 	},
-	.usb_driver		= &cp210x_driver,
 	.id_table		= id_table,
 	.num_ports		= 1,
 	.bulk_in_size		= 256,
@@ -174,9 +179,14 @@ static struct usb_serial_driver cp210x_device = {
 	.tiocmget 		= cp210x_tiocmget,
 	.tiocmset		= cp210x_tiocmset,
 	.attach			= cp210x_startup,
+	.release		= cp210x_release,
 	.dtr_rts		= cp210x_dtr_rts
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&cp210x_device, NULL
+};
+
 /* Config request types */
 #define REQTYPE_HOST_TO_DEVICE	0x41
 #define REQTYPE_DEVICE_TO_HOST	0xc1
@@ -261,6 +271,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 	__le32 *buf;
 	int result, i, length;
 
@@ -276,7 +287,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				request, REQTYPE_DEVICE_TO_HOST, 0x0000,
-				0, buf, size, 300);
+				port_priv->bInterfaceNumber, buf, size, 300);
 
 	/* Convert data into an array of integers */
 	for (i = 0; i < length; i++)
@@ -286,7 +297,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 
 	if (result != size) {
 		dbg("%s - Unable to send config request, "
-				"request=0x%x size=%d result=%d\n",
+				"request=0x%x size=%d result=%d",
 				__func__, request, size, result);
 		if (result > 0)
 			result = -EPROTO;
@@ -307,6 +318,7 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 	__le32 *buf;
 	int result, i, length;
 
@@ -328,19 +340,19 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
 				request, REQTYPE_HOST_TO_DEVICE, 0x0000,
-				0, buf, size, 300);
+				port_priv->bInterfaceNumber, buf, size, 300);
 	} else {
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
 				request, REQTYPE_HOST_TO_DEVICE, data[0],
-				0, NULL, 0, 300);
+				port_priv->bInterfaceNumber, NULL, 0, 300);
 	}
 
 	kfree(buf);
 
 	if ((size > 2 && result != size) || result < 0) {
 		dbg("%s - Unable to send request, "
-				"request=0x%x size=%d result=%d\n",
+				"request=0x%x size=%d result=%d",
 				__func__, request, size, result);
 		if (result > 0)
 			result = -EPROTO;
@@ -683,13 +695,13 @@ static void cp210x_set_termios(struct tty_struct *tty,
 		default:
 			dbg("cp210x driver does not "
 					"support the number of bits requested,"
-					" using 8 bit mode\n");
+					" using 8 bit mode");
 				bits |= BITS_DATA_8;
 				break;
 		}
 		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
 			dbg("Number of data bits requested "
-					"not supported by device\n");
+					"not supported by device");
 	}
 
 	if ((cflag     & (PARENB|PARODD|CMSPAR)) !=
@@ -716,8 +728,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
 			}
 		}
 		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
-			dbg("Parity mode not supported "
-					"by device\n");
+			dbg("Parity mode not supported by device");
 	}
 
 	if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
@@ -732,7 +743,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
 		}
 		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
 			dbg("Number of stop bits requested "
-					"not supported by device\n");
+					"not supported by device");
 	}
 
 	if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
@@ -844,40 +855,40 @@ static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
 
 static int cp210x_startup(struct usb_serial *serial)
 {
+	struct cp210x_port_private *port_priv;
+	int i;
+
 	/* cp210x buffers behave strangely unless device is reset */
 	usb_reset_device(serial->dev);
-	return 0;
-}
 
-static int __init cp210x_init(void)
-{
-	int retval;
+	for (i = 0; i < serial->num_ports; i++) {
+		port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
+		if (!port_priv)
+			return -ENOMEM;
 
-	retval = usb_serial_register(&cp210x_device);
-	if (retval)
-		return retval; /* Failed to register */
+		memset(port_priv, 0x00, sizeof(*port_priv));
+		port_priv->bInterfaceNumber =
+		    serial->interface->cur_altsetting->desc.bInterfaceNumber;
 
-	retval = usb_register(&cp210x_driver);
-	if (retval) {
-		/* Failed to register */
-		usb_serial_deregister(&cp210x_device);
-		return retval;
+		usb_set_serial_port_data(serial->port[i], port_priv);
 	}
 
-	/* Success */
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
 	return 0;
 }
 
-static void __exit cp210x_exit(void)
+static void cp210x_release(struct usb_serial *serial)
 {
-	usb_deregister(&cp210x_driver);
-	usb_serial_deregister(&cp210x_device);
+	struct cp210x_port_private *port_priv;
+	int i;
+
+	for (i = 0; i < serial->num_ports; i++) {
+		port_priv = usb_get_serial_port_data(serial->port[i]);
+		kfree(port_priv);
+		usb_set_serial_port_data(serial->port[i], NULL);
+	}
 }
 
-module_init(cp210x_init);
-module_exit(cp210x_exit);
+module_usb_serial_driver(cp210x_driver, serial_drivers);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 6bc3802a581a..d39b9418f2fb 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -82,7 +82,6 @@ static struct usb_driver cyberjack_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
 };
 
 static struct usb_serial_driver cyberjack_device = {
@@ -91,7 +90,6 @@ static struct usb_serial_driver cyberjack_device = {
 		.name =		"cyberjack",
 	},
 	.description =		"Reiner SCT Cyberjack USB card reader",
-	.usb_driver = 		&cyberjack_driver,
 	.id_table =		id_table,
 	.num_ports =		1,
 	.attach =		cyberjack_startup,
@@ -106,6 +104,10 @@ static struct usb_serial_driver cyberjack_device = {
 	.write_bulk_callback =	cyberjack_write_bulk_callback,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&cyberjack_device, NULL
+};
+
 struct cyberjack_private {
 	spinlock_t	lock;		/* Lock for SMP */
 	short		rdtodo;		/* Bytes still to read */
@@ -473,35 +475,7 @@ exit:
 	usb_serial_port_softint(port);
 }
 
-static int __init cyberjack_init(void)
-{
-	int retval;
-	retval  = usb_serial_register(&cyberjack_device);
-	if (retval)
-		goto failed_usb_serial_register;
-	retval = usb_register(&cyberjack_driver);
-	if (retval)
-		goto failed_usb_register;
-
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION " "
-	       DRIVER_AUTHOR "\n");
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
-
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&cyberjack_device);
-failed_usb_serial_register:
-	return retval;
-}
-
-static void __exit cyberjack_exit(void)
-{
-	usb_deregister(&cyberjack_driver);
-	usb_serial_deregister(&cyberjack_device);
-}
-
-module_init(cyberjack_init);
-module_exit(cyberjack_exit);
+module_usb_serial_driver(cyberjack_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 3bdeafa29c24..afc886c75d2f 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -94,7 +94,6 @@ static struct usb_driver cypress_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table_combined,
-	.no_dynamic_id = 	1,
 };
 
 enum packet_format {
@@ -163,7 +162,6 @@ static struct usb_serial_driver cypress_earthmate_device = {
 		.name =			"earthmate",
 	},
 	.description =			"DeLorme Earthmate USB",
-	.usb_driver = 			&cypress_driver,
 	.id_table =			id_table_earthmate,
 	.num_ports =			1,
 	.attach =			cypress_earthmate_startup,
@@ -190,7 +188,6 @@ static struct usb_serial_driver cypress_hidcom_device = {
 		.name =			"cyphidcom",
 	},
 	.description =			"HID->COM RS232 Adapter",
-	.usb_driver = 			&cypress_driver,
 	.id_table =			id_table_cyphidcomrs232,
 	.num_ports =			1,
 	.attach =			cypress_hidcom_startup,
@@ -217,7 +214,6 @@ static struct usb_serial_driver cypress_ca42v2_device = {
 		.name =			"nokiaca42v2",
 	},
 	.description =			"Nokia CA-42 V2 Adapter",
-	.usb_driver = 			&cypress_driver,
 	.id_table =			id_table_nokiaca42v2,
 	.num_ports =			1,
 	.attach =			cypress_ca42v2_startup,
@@ -238,6 +234,11 @@ static struct usb_serial_driver cypress_ca42v2_device = {
 	.write_int_callback =		cypress_write_int_callback,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&cypress_earthmate_device, &cypress_hidcom_device,
+	&cypress_ca42v2_device, NULL
+};
+
 /*****************************************************************************
  * Cypress serial helper functions
  *****************************************************************************/
@@ -800,7 +801,7 @@ send:
 		cypress_write_int_callback, port, priv->write_urb_interval);
 	result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
 	if (result) {
-		dev_err(&port->dev,
+		dev_err_console(port,
 				"%s - failed submitting write urb, error %d\n",
 							__func__, result);
 		priv->write_urb_in_use = 0;
@@ -1345,58 +1346,7 @@ static void cypress_write_int_callback(struct urb *urb)
 	cypress_send(port);
 }
 
-
-/*****************************************************************************
- * Module functions
- *****************************************************************************/
-
-static int __init cypress_init(void)
-{
-	int retval;
-
-	dbg("%s", __func__);
-
-	retval = usb_serial_register(&cypress_earthmate_device);
-	if (retval)
-		goto failed_em_register;
-	retval = usb_serial_register(&cypress_hidcom_device);
-	if (retval)
-		goto failed_hidcom_register;
-	retval = usb_serial_register(&cypress_ca42v2_device);
-	if (retval)
-		goto failed_ca42v2_register;
-	retval = usb_register(&cypress_driver);
-	if (retval)
-		goto failed_usb_register;
-
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-
-failed_usb_register:
-	usb_serial_deregister(&cypress_ca42v2_device);
-failed_ca42v2_register:
-	usb_serial_deregister(&cypress_hidcom_device);
-failed_hidcom_register:
-	usb_serial_deregister(&cypress_earthmate_device);
-failed_em_register:
-	return retval;
-}
-
-
-static void __exit cypress_exit(void)
-{
-	dbg("%s", __func__);
-
-	usb_deregister(&cypress_driver);
-	usb_serial_deregister(&cypress_earthmate_device);
-	usb_serial_deregister(&cypress_hidcom_device);
-	usb_serial_deregister(&cypress_ca42v2_device);
-}
-
-
-module_init(cypress_init);
-module_exit(cypress_exit);
+module_usb_serial_driver(cypress_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index b23bebd721a1..999f91bf70de 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -276,7 +276,6 @@ static struct usb_driver digi_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table_combined,
-	.no_dynamic_id = 	1,
 };
 
 
@@ -288,7 +287,6 @@ static struct usb_serial_driver digi_acceleport_2_device = {
 		.name =			"digi_2",
 	},
 	.description =			"Digi 2 port USB adapter",
-	.usb_driver = 			&digi_driver,
 	.id_table =			id_table_2,
 	.num_ports =			3,
 	.open =				digi_open,
@@ -316,7 +314,6 @@ static struct usb_serial_driver digi_acceleport_4_device = {
 		.name =			"digi_4",
 	},
 	.description =			"Digi 4 port USB adapter",
-	.usb_driver = 			&digi_driver,
 	.id_table =			id_table_4,
 	.num_ports =			4,
 	.open =				digi_open,
@@ -337,6 +334,9 @@ static struct usb_serial_driver digi_acceleport_4_device = {
 	.release =			digi_release,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&digi_acceleport_2_device, &digi_acceleport_4_device, NULL
+};
 
 /* Functions */
 
@@ -995,7 +995,7 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	/* return length of new data written, or error */
 	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 	if (ret < 0)
-		dev_err(&port->dev,
+		dev_err_console(port,
 			"%s: usb_submit_urb failed, ret=%d, port=%d\n",
 			__func__, ret, priv->dp_port_num);
 	dbg("digi_write: returning %d", ret);
@@ -1065,7 +1065,7 @@ static void digi_write_bulk_callback(struct urb *urb)
 
 	spin_unlock(&priv->dp_port_lock);
 	if (ret && ret != -EPERM)
-		dev_err(&port->dev,
+		dev_err_console(port,
 			"%s: usb_submit_urb failed, ret=%d, port=%d\n",
 			__func__, ret, priv->dp_port_num);
 }
@@ -1580,40 +1580,7 @@ static int digi_read_oob_callback(struct urb *urb)
 
 }
 
-static int __init digi_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&digi_acceleport_2_device);
-	if (retval)
-		goto failed_acceleport_2_device;
-	retval = usb_serial_register(&digi_acceleport_4_device);
-	if (retval)
-		goto failed_acceleport_4_device;
-	retval = usb_register(&digi_driver);
-	if (retval)
-		goto failed_usb_register;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&digi_acceleport_4_device);
-failed_acceleport_4_device:
-	usb_serial_deregister(&digi_acceleport_2_device);
-failed_acceleport_2_device:
-	return retval;
-}
-
-static void __exit digi_exit (void)
-{
-	usb_deregister(&digi_driver);
-	usb_serial_deregister(&digi_acceleport_2_device);
-	usb_serial_deregister(&digi_acceleport_4_device);
-}
-
-
-module_init(digi_init);
-module_exit(digi_exit);
-
+module_usb_serial_driver(digi_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index aced6817bf95..5b99fc09e327 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -56,7 +56,6 @@ static struct usb_driver empeg_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id =	1,
 };
 
 static struct usb_serial_driver empeg_device = {
@@ -65,7 +64,6 @@ static struct usb_serial_driver empeg_device = {
 		.name =		"empeg",
 	},
 	.id_table =		id_table,
-	.usb_driver =		&empeg_driver,
 	.num_ports =		1,
 	.bulk_out_size =	256,
 	.throttle =		usb_serial_generic_throttle,
@@ -74,6 +72,10 @@ static struct usb_serial_driver empeg_device = {
 	.init_termios =		empeg_init_termios,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&empeg_device, NULL
+};
+
 static int empeg_startup(struct usb_serial *serial)
 {
 	int r;
@@ -136,33 +138,7 @@ static void empeg_init_termios(struct tty_struct *tty)
 	tty_encode_baud_rate(tty, 115200, 115200);
 }
 
-static int __init empeg_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&empeg_device);
-	if (retval)
-		return retval;
-	retval = usb_register(&empeg_driver);
-	if (retval) {
-		usb_serial_deregister(&empeg_device);
-		return retval;
-	}
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-
-	return 0;
-}
-
-static void __exit empeg_exit(void)
-{
-	usb_deregister(&empeg_driver);
-	usb_serial_deregister(&empeg_device);
-}
-
-
-module_init(empeg_init);
-module_exit(empeg_exit);
+module_usb_serial_driver(empeg_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
new file mode 100644
index 000000000000..88c0b1963920
--- /dev/null
+++ b/drivers/usb/serial/f81232.c
@@ -0,0 +1,405 @@
+/*
+ * Fintek F81232 USB to serial adaptor driver
+ *
+ * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org)
+ * Copyright (C) 2012 Linux Foundation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static bool debug;
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x1934, 0x0706) },
+	{ }					/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+#define CONTROL_DTR			0x01
+#define CONTROL_RTS			0x02
+
+#define UART_STATE			0x08
+#define UART_STATE_TRANSIENT_MASK	0x74
+#define UART_DCD			0x01
+#define UART_DSR			0x02
+#define UART_BREAK_ERROR		0x04
+#define UART_RING			0x08
+#define UART_FRAME_ERROR		0x10
+#define UART_PARITY_ERROR		0x20
+#define UART_OVERRUN_ERROR		0x40
+#define UART_CTS			0x80
+
+struct f81232_private {
+	spinlock_t lock;
+	wait_queue_head_t delta_msr_wait;
+	u8 line_control;
+	u8 line_status;
+};
+
+static void f81232_update_line_status(struct usb_serial_port *port,
+				      unsigned char *data,
+				      unsigned int actual_length)
+{
+}
+
+static void f81232_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port =  urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	unsigned int actual_length = urb->actual_length;
+	int status = urb->status;
+	int retval;
+
+	dbg("%s (%d)", __func__, port->number);
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d", __func__,
+		    status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d", __func__,
+		    status);
+		goto exit;
+	}
+
+	usb_serial_debug_data(debug, &port->dev, __func__,
+			      urb->actual_length, urb->transfer_buffer);
+
+	f81232_update_line_status(port, data, actual_length);
+
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&urb->dev->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
+}
+
+static void f81232_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+	struct tty_struct *tty;
+	unsigned char *data = urb->transfer_buffer;
+	char tty_flag = TTY_NORMAL;
+	unsigned long flags;
+	u8 line_status;
+	int i;
+
+	/* update line status */
+	spin_lock_irqsave(&priv->lock, flags);
+	line_status = priv->line_status;
+	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	wake_up_interruptible(&priv->delta_msr_wait);
+
+	if (!urb->actual_length)
+		return;
+
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+
+	/* break takes precedence over parity, */
+	/* which takes precedence over framing errors */
+	if (line_status & UART_BREAK_ERROR)
+		tty_flag = TTY_BREAK;
+	else if (line_status & UART_PARITY_ERROR)
+		tty_flag = TTY_PARITY;
+	else if (line_status & UART_FRAME_ERROR)
+		tty_flag = TTY_FRAME;
+	dbg("%s - tty_flag = %d", __func__, tty_flag);
+
+	/* overrun is special, not associated with a char */
+	if (line_status & UART_OVERRUN_ERROR)
+		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+	if (port->port.console && port->sysrq) {
+		for (i = 0; i < urb->actual_length; ++i)
+			if (!usb_serial_handle_sysrq_char(port, data[i]))
+				tty_insert_flip_char(tty, data[i], tty_flag);
+	} else {
+		tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
+							urb->actual_length);
+	}
+
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+}
+
+static int set_control_lines(struct usb_device *dev, u8 value)
+{
+	/* FIXME - Stubbed out for now */
+	return 0;
+}
+
+static void f81232_break_ctl(struct tty_struct *tty, int break_state)
+{
+	/* FIXME - Stubbed out for now */
+
+	/*
+	 * break_state = -1 to turn on break, and 0 to turn off break
+	 * see drivers/char/tty_io.c to see it used.
+	 * last_set_data_urb_value NEVER has the break bit set in it.
+	 */
+}
+
+static void f81232_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
+{
+	/* FIXME - Stubbed out for now */
+
+	/* Don't change anything if nothing has changed */
+	if (!tty_termios_hw_change(tty->termios, old_termios))
+		return;
+
+	/* Do the real work here... */
+}
+
+static int f81232_tiocmget(struct tty_struct *tty)
+{
+	/* FIXME - Stubbed out for now */
+	return 0;
+}
+
+static int f81232_tiocmset(struct tty_struct *tty,
+			unsigned int set, unsigned int clear)
+{
+	/* FIXME - Stubbed out for now */
+	return 0;
+}
+
+static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct ktermios tmp_termios;
+	int result;
+
+	/* Setup termios */
+	if (tty)
+		f81232_set_termios(tty, port, &tmp_termios);
+
+	dbg("%s - submitting interrupt urb", __func__);
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (result) {
+		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
+			" error %d\n", __func__, result);
+		return result;
+	}
+
+	result = usb_serial_generic_open(tty, port);
+	if (result) {
+		usb_kill_urb(port->interrupt_in_urb);
+		return result;
+	}
+
+	port->port.drain_delay = 256;
+	return 0;
+}
+
+static void f81232_close(struct usb_serial_port *port)
+{
+	usb_serial_generic_close(port);
+	usb_kill_urb(port->interrupt_in_urb);
+}
+
+static void f81232_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	/* Change DTR and RTS */
+	if (on)
+		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+	else
+		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	set_control_lines(port->serial->dev, control);
+}
+
+static int f81232_carrier_raised(struct usb_serial_port *port)
+{
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+	if (priv->line_status & UART_DCD)
+		return 1;
+	return 0;
+}
+
+static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
+{
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned int prevstatus;
+	unsigned int status;
+	unsigned int changed;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	prevstatus = priv->line_status;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	while (1) {
+		interruptible_sleep_on(&priv->delta_msr_wait);
+		/* see if a signal did it */
+		if (signal_pending(current))
+			return -ERESTARTSYS;
+
+		spin_lock_irqsave(&priv->lock, flags);
+		status = priv->line_status;
+		spin_unlock_irqrestore(&priv->lock, flags);
+
+		changed = prevstatus ^ status;
+
+		if (((arg & TIOCM_RNG) && (changed & UART_RING)) ||
+		    ((arg & TIOCM_DSR) && (changed & UART_DSR)) ||
+		    ((arg & TIOCM_CD)  && (changed & UART_DCD)) ||
+		    ((arg & TIOCM_CTS) && (changed & UART_CTS))) {
+			return 0;
+		}
+		prevstatus = status;
+	}
+	/* NOTREACHED */
+	return 0;
+}
+
+static int f81232_ioctl(struct tty_struct *tty,
+			unsigned int cmd, unsigned long arg)
+{
+	struct serial_struct ser;
+	struct usb_serial_port *port = tty->driver_data;
+	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
+
+	switch (cmd) {
+	case TIOCGSERIAL:
+		memset(&ser, 0, sizeof ser);
+		ser.type = PORT_16654;
+		ser.line = port->serial->minor;
+		ser.port = port->number;
+		ser.baud_base = 460800;
+
+		if (copy_to_user((void __user *)arg, &ser, sizeof ser))
+			return -EFAULT;
+
+		return 0;
+
+	case TIOCMIWAIT:
+		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+		return wait_modem_info(port, arg);
+	default:
+		dbg("%s not supported = 0x%04x", __func__, cmd);
+		break;
+	}
+	return -ENOIOCTLCMD;
+}
+
+static int f81232_startup(struct usb_serial *serial)
+{
+	struct f81232_private *priv;
+	int i;
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		priv = kzalloc(sizeof(struct f81232_private), GFP_KERNEL);
+		if (!priv)
+			goto cleanup;
+		spin_lock_init(&priv->lock);
+		init_waitqueue_head(&priv->delta_msr_wait);
+		usb_set_serial_port_data(serial->port[i], priv);
+	}
+	return 0;
+
+cleanup:
+	for (--i; i >= 0; --i) {
+		priv = usb_get_serial_port_data(serial->port[i]);
+		kfree(priv);
+		usb_set_serial_port_data(serial->port[i], NULL);
+	}
+	return -ENOMEM;
+}
+
+static void f81232_release(struct usb_serial *serial)
+{
+	int i;
+	struct f81232_private *priv;
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		priv = usb_get_serial_port_data(serial->port[i]);
+		kfree(priv);
+	}
+}
+
+static struct usb_driver f81232_driver = {
+	.name =		"f81232",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+	.suspend =      usb_serial_suspend,
+	.resume =       usb_serial_resume,
+	.no_dynamic_id = 	1,
+	.supports_autosuspend =	1,
+};
+
+static struct usb_serial_driver f81232_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"f81232",
+	},
+	.id_table =		id_table,
+	.usb_driver = 		&f81232_driver,
+	.num_ports =		1,
+	.bulk_in_size =		256,
+	.bulk_out_size =	256,
+	.open =			f81232_open,
+	.close =		f81232_close,
+	.dtr_rts = 		f81232_dtr_rts,
+	.carrier_raised =	f81232_carrier_raised,
+	.ioctl =		f81232_ioctl,
+	.break_ctl =		f81232_break_ctl,
+	.set_termios =		f81232_set_termios,
+	.tiocmget =		f81232_tiocmget,
+	.tiocmset =		f81232_tiocmset,
+	.process_read_urb =	f81232_process_read_urb,
+	.read_int_callback =	f81232_read_int_callback,
+	.attach =		f81232_startup,
+	.release =		f81232_release,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&f81232_device,
+	NULL,
+};
+
+module_usb_serial_driver(f81232_driver, serial_drivers);
+
+MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver");
+MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org");
+MODULE_LICENSE("GPL v2");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f770415305f8..7c229d304684 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -188,6 +188,7 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_FTX_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
@@ -536,6 +537,10 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_1_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_2_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_3_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_4_PID) },
 	{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
 	{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
 	{ USB_DEVICE(OCT_VID, OCT_DK201_PID) },
@@ -797,7 +802,7 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(HORNBY_VID, HORNBY_ELITE_PID) },
+	{ USB_DEVICE(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID) },
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
 	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
@@ -846,6 +851,9 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -857,7 +865,6 @@ static struct usb_driver ftdi_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table_combined,
-	.no_dynamic_id =	1,
 };
 
 static const char *ftdi_chip_name[] = {
@@ -868,7 +875,8 @@ static const char *ftdi_chip_name[] = {
 	[FT232RL] = "FT232RL",
 	[FT2232H] = "FT2232H",
 	[FT4232H] = "FT4232H",
-	[FT232H]  = "FT232H"
+	[FT232H]  = "FT232H",
+	[FTX]     = "FT-X"
 };
 
 
@@ -915,7 +923,6 @@ static struct usb_serial_driver ftdi_sio_device = {
 		.name =		"ftdi_sio",
 	},
 	.description =		"FTDI USB Serial Device",
-	.usb_driver = 		&ftdi_driver,
 	.id_table =		id_table_combined,
 	.num_ports =		1,
 	.bulk_in_size =		512,
@@ -938,6 +945,10 @@ static struct usb_serial_driver ftdi_sio_device = {
 	.break_ctl =		ftdi_break_ctl,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ftdi_sio_device, NULL
+};
+
 
 #define WDR_TIMEOUT 5000 /* default urb timeout */
 #define WDR_SHORT_TIMEOUT 1000	/* shorter urb timeout */
@@ -1169,7 +1180,8 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
 		break;
 	case FT232BM: /* FT232BM chip */
 	case FT2232C: /* FT2232C chip */
-	case FT232RL:
+	case FT232RL: /* FT232RL chip */
+	case FTX:     /* FT-X series */
 		if (baud <= 3000000) {
 			__u16 product_id = le16_to_cpu(
 				port->serial->dev->descriptor.idProduct);
@@ -1458,10 +1470,14 @@ static void ftdi_determine_type(struct usb_serial_port *port)
 	} else if (version < 0x900) {
 		/* Assume it's an FT232RL */
 		priv->chip_type = FT232RL;
-	} else {
+	} else if (version < 0x1000) {
 		/* Assume it's an FT232H */
 		priv->chip_type = FT232H;
+	} else {
+		/* Assume it's an FT-X series device */
+		priv->chip_type = FTX;
 	}
+
 	dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
 }
 
@@ -1589,7 +1605,8 @@ static int create_sysfs_attrs(struct usb_serial_port *port)
 		     priv->chip_type == FT232RL ||
 		     priv->chip_type == FT2232H ||
 		     priv->chip_type == FT4232H ||
-		     priv->chip_type == FT232H)) {
+		     priv->chip_type == FT232H ||
+		     priv->chip_type == FTX)) {
 			retval = device_create_file(&port->dev,
 						    &dev_attr_latency_timer);
 		}
@@ -1611,7 +1628,8 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
 		    priv->chip_type == FT232RL ||
 		    priv->chip_type == FT2232H ||
 		    priv->chip_type == FT4232H ||
-                    priv->chip_type == FT232H) {
+		    priv->chip_type == FT232H ||
+		    priv->chip_type == FTX) {
 			device_remove_file(&port->dev, &dev_attr_latency_timer);
 		}
 	}
@@ -1763,7 +1781,8 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
 
 	dbg("%s", __func__);
 
-	if (strcmp(udev->manufacturer, "CALAO Systems") == 0)
+	if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
+	    (udev->product && !strcmp(udev->product, "BeagleBone/XDS100")))
 		return ftdi_jtag_probe(serial);
 
 	return 0;
@@ -2288,6 +2307,7 @@ static int ftdi_tiocmget(struct tty_struct *tty)
 	case FT2232H:
 	case FT4232H:
 	case FT232H:
+	case FTX:
 		len = 2;
 		break;
 	default:
@@ -2420,19 +2440,10 @@ static int __init ftdi_init(void)
 		id_table_combined[i].idVendor = vendor;
 		id_table_combined[i].idProduct = product;
 	}
-	retval = usb_serial_register(&ftdi_sio_device);
-	if (retval)
-		goto failed_sio_register;
-	retval = usb_register(&ftdi_driver);
-	if (retval)
-		goto failed_usb_register;
-
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&ftdi_sio_device);
-failed_sio_register:
+	retval = usb_serial_register_drivers(&ftdi_driver, serial_drivers);
+	if (retval == 0)
+		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+			       DRIVER_DESC "\n");
 	return retval;
 }
 
@@ -2440,8 +2451,7 @@ static void __exit ftdi_exit(void)
 {
 	dbg("%s", __func__);
 
-	usb_deregister(&ftdi_driver);
-	usb_serial_deregister(&ftdi_sio_device);
+	usb_serial_deregister_drivers(&ftdi_driver, serial_drivers);
 }
 
 
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 19584faa86f9..ed58c6fa8dbe 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -157,7 +157,8 @@ enum ftdi_chip_type {
 	FT232RL = 5,
 	FT2232H = 6,
 	FT4232H = 7,
-	FT232H  = 8
+	FT232H  = 8,
+	FTX     = 9,
 };
 
 enum ftdi_sio_baudrate {
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 6f6058f0db1b..0838baf892f3 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -23,12 +23,15 @@
 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
 #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
 #define FTDI_232H_PID  0x6014 /* Single channel hi-speed device */
+#define FTDI_FTX_PID   0x6015 /* FT-X series (FT201X, FT230X, FT231X, etc) */
 #define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX */
 #define FTDI_232RL_PID  0xFBFA  /* Product ID for FT232RL */
 
 
 /*** third-party PIDs (using FTDI_VID) ***/
 
+#define FTDI_LUMEL_PD12_PID	0x6002
+
 /*
  * Marvell OpenRD Base, Client
  * http://www.open-rd.org
@@ -97,6 +100,8 @@
 #define FTDI_TACTRIX_OPENPORT_13S_PID	0xCC49	/* OpenPort 1.3 Subaru */
 #define FTDI_TACTRIX_OPENPORT_13U_PID	0xCC4A	/* OpenPort 1.3 Universal */
 
+#define FTDI_DISTORTEC_JTAG_LOCK_PICK_PID	0xCFF8
+
 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
 /* the VID is the standard ftdi vid (FTDI_VID) */
 #define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
@@ -532,10 +537,14 @@
 #define ADI_GNICEPLUS_PID	0xF001
 
 /*
- * Hornby Elite
+ * Microchip Technology, Inc.
+ *
+ * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are also used by:
+ * Hornby Elite - Digital Command Control Console
+ * http://www.hornby.com/hornby-dcc/controllers/
  */
-#define HORNBY_VID		0x04D8
-#define HORNBY_ELITE_PID	0x000A
+#define MICROCHIP_VID		0x04D8
+#define MICROCHIP_USB_BOARD_PID	0x000A /* CDC RS-232 Emulation Demo */
 
 /*
  * RATOC REX-USB60F
@@ -680,6 +689,10 @@
 #define SEALEVEL_2803_6_PID	0X2863	/* SeaLINK+8 (2803) Port 6 */
 #define SEALEVEL_2803_7_PID	0X2873	/* SeaLINK+8 (2803) Port 7 */
 #define SEALEVEL_2803_8_PID	0X2883	/* SeaLINK+8 (2803) Port 8 */
+#define SEALEVEL_2803R_1_PID	0Xa02a	/* SeaLINK+8 (2803-ROHS) Port 1+2 */
+#define SEALEVEL_2803R_2_PID	0Xa02b	/* SeaLINK+8 (2803-ROHS) Port 3+4 */
+#define SEALEVEL_2803R_3_PID	0Xa02c	/* SeaLINK+8 (2803-ROHS) Port 5+6 */
+#define SEALEVEL_2803R_4_PID	0Xa02d	/* SeaLINK+8 (2803-ROHS) Port 7+8 */
 
 /*
  * JETI SPECTROMETER SPECBOS 1201
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
index 5d4b099dcf8b..4577b3607922 100644
--- a/drivers/usb/serial/funsoft.c
+++ b/drivers/usb/serial/funsoft.c
@@ -29,7 +29,6 @@ static struct usb_driver funsoft_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
 };
 
 static struct usb_serial_driver funsoft_device = {
@@ -38,31 +37,15 @@ static struct usb_serial_driver funsoft_device = {
 		.name =		"funsoft",
 	},
 	.id_table =		id_table,
-	.usb_driver = 		&funsoft_driver,
 	.num_ports =		1,
 };
 
-static int __init funsoft_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&funsoft_device);
-	if (retval)
-		return retval;
-	retval = usb_register(&funsoft_driver);
-	if (retval)
-		usb_serial_deregister(&funsoft_device);
-	return retval;
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&funsoft_device, NULL
+};
 
-static void __exit funsoft_exit(void)
-{
-	usb_deregister(&funsoft_driver);
-	usb_serial_deregister(&funsoft_device);
-}
+module_usb_serial_driver(funsoft_driver, serial_drivers);
 
-module_init(funsoft_init);
-module_exit(funsoft_exit);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 21343378c322..e8eb6347bf3a 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -224,7 +224,6 @@ static struct usb_driver garmin_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 1,
 };
 
 
@@ -1497,7 +1496,6 @@ static struct usb_serial_driver garmin_device = {
 		.name        = "garmin_gps",
 	},
 	.description         = "Garmin GPS usb/tty",
-	.usb_driver          = &garmin_driver,
 	.id_table            = id_table,
 	.num_ports           = 1,
 	.open                = garmin_open,
@@ -1514,40 +1512,11 @@ static struct usb_serial_driver garmin_device = {
 	.read_int_callback   = garmin_read_int_callback,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&garmin_device, NULL
+};
 
-
-static int __init garmin_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&garmin_device);
-	if (retval)
-		goto failed_garmin_register;
-	retval = usb_register(&garmin_driver);
-	if (retval)
-		goto failed_usb_register;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&garmin_device);
-failed_garmin_register:
-	return retval;
-}
-
-
-static void __exit garmin_exit(void)
-{
-	usb_deregister(&garmin_driver);
-	usb_serial_deregister(&garmin_device);
-}
-
-
-
-
-module_init(garmin_init);
-module_exit(garmin_exit);
+module_usb_serial_driver(garmin_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
@@ -1557,4 +1526,3 @@ module_param(debug, bool, S_IWUSR | S_IRUGO);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
 module_param(initial_mode, int, S_IRUGO);
 MODULE_PARM_DESC(initial_mode, "Initial mode");
-
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index f7403576f99f..664deb63807c 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -54,7 +54,6 @@ static struct usb_driver generic_driver = {
 	.probe =	generic_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	generic_serial_ids,
-	.no_dynamic_id =	1,
 };
 
 /* All of the device info needed for the Generic Serial Converter */
@@ -64,7 +63,6 @@ struct usb_serial_driver usb_serial_generic_device = {
 		.name =		"generic",
 	},
 	.id_table =		generic_device_ids,
-	.usb_driver = 		&generic_driver,
 	.num_ports =		1,
 	.disconnect =		usb_serial_generic_disconnect,
 	.release =		usb_serial_generic_release,
@@ -73,6 +71,10 @@ struct usb_serial_driver usb_serial_generic_device = {
 	.resume =		usb_serial_generic_resume,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&usb_serial_generic_device, NULL
+};
+
 static int generic_probe(struct usb_interface *interface,
 			       const struct usb_device_id *id)
 {
@@ -97,13 +99,7 @@ int usb_serial_generic_register(int _debug)
 		USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT;
 
 	/* register our generic driver with ourselves */
-	retval = usb_serial_register(&usb_serial_generic_device);
-	if (retval)
-		goto exit;
-	retval = usb_register(&generic_driver);
-	if (retval)
-		usb_serial_deregister(&usb_serial_generic_device);
-exit:
+	retval = usb_serial_register_drivers(&generic_driver, serial_drivers);
 #endif
 	return retval;
 }
@@ -112,8 +108,7 @@ void usb_serial_generic_deregister(void)
 {
 #ifdef CONFIG_USB_SERIAL_GENERIC
 	/* remove our generic driver */
-	usb_deregister(&generic_driver);
-	usb_serial_deregister(&usb_serial_generic_device);
+	usb_serial_deregister_drivers(&generic_driver, serial_drivers);
 #endif
 }
 
@@ -217,7 +212,7 @@ retry:
 	clear_bit(i, &port->write_urbs_free);
 	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result) {
-		dev_err(&port->dev, "%s - error submitting urb: %d\n",
+		dev_err_console(port, "%s - error submitting urb: %d\n",
 						__func__, result);
 		set_bit(i, &port->write_urbs_free);
 		spin_lock_irqsave(&port->lock, flags);
diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index 809379159b0e..2563e788c9b3 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -41,7 +41,6 @@ static struct usb_driver hp49gp_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
 };
 
 static struct usb_serial_driver hp49gp_device = {
@@ -50,36 +49,14 @@ static struct usb_serial_driver hp49gp_device = {
 		.name =		"hp4X",
 	},
 	.id_table =		id_table,
-	.usb_driver = 		&hp49gp_driver,
 	.num_ports =		1,
 };
 
-static int __init hp49gp_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&hp49gp_device);
-	if (retval)
-		goto failed_usb_serial_register;
-	retval = usb_register(&hp49gp_driver);
-	if (retval)
-		goto failed_usb_register;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&hp49gp_device);
-failed_usb_serial_register:
-	return retval;
-}
-
-static void __exit hp49gp_exit(void)
-{
-	usb_deregister(&hp49gp_driver);
-	usb_serial_deregister(&hp49gp_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&hp49gp_device, NULL
+};
 
-module_init(hp49gp_init);
-module_exit(hp49gp_exit);
+module_usb_serial_driver(hp49gp_driver, serial_drivers);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 0497575e4799..323e87235711 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -193,7 +193,8 @@ static const struct divisor_table_entry divisor_table[] = {
 /* local variables */
 static bool debug;
 
-static atomic_t CmdUrbs;	/* Number of outstanding Command Write Urbs */
+/* Number of outstanding Command Write Urbs */
+static atomic_t CmdUrbs = ATOMIC_INIT(0);
 
 
 /* local function prototypes */
@@ -1286,7 +1287,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
 	count = fifo->count;
 	buffer = kmalloc(count+2, GFP_ATOMIC);
 	if (buffer == NULL) {
-		dev_err(&edge_port->port->dev,
+		dev_err_console(edge_port->port,
 				"%s - no more kernel memory...\n", __func__);
 		edge_port->write_in_progress = false;
 		goto exit_send;
@@ -1331,7 +1332,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
 		/* something went wrong */
-		dev_err(&edge_port->port->dev,
+		dev_err_console(edge_port->port,
 			"%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n",
 				__func__, status);
 		edge_port->write_in_progress = false;
@@ -3180,65 +3181,8 @@ static void edge_release(struct usb_serial *serial)
 	kfree(edge_serial);
 }
 
+module_usb_serial_driver(io_driver, serial_drivers);
 
-/****************************************************************************
- * edgeport_init
- *	This is called by the module subsystem, or on startup to initialize us
- ****************************************************************************/
-static int __init edgeport_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&edgeport_2port_device);
-	if (retval)
-		goto failed_2port_device_register;
-	retval = usb_serial_register(&edgeport_4port_device);
-	if (retval)
-		goto failed_4port_device_register;
-	retval = usb_serial_register(&edgeport_8port_device);
-	if (retval)
-		goto failed_8port_device_register;
-	retval = usb_serial_register(&epic_device);
-	if (retval)
-		goto failed_epic_device_register;
-	retval = usb_register(&io_driver);
-	if (retval)
-		goto failed_usb_register;
-	atomic_set(&CmdUrbs, 0);
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-
-failed_usb_register:
-	usb_serial_deregister(&epic_device);
-failed_epic_device_register:
-	usb_serial_deregister(&edgeport_8port_device);
-failed_8port_device_register:
-	usb_serial_deregister(&edgeport_4port_device);
-failed_4port_device_register:
-	usb_serial_deregister(&edgeport_2port_device);
-failed_2port_device_register:
-	return retval;
-}
-
-
-/****************************************************************************
- * edgeport_exit
- *	Called when the driver is about to be unloaded.
- ****************************************************************************/
-static void __exit edgeport_exit (void)
-{
-	usb_deregister(&io_driver);
-	usb_serial_deregister(&edgeport_2port_device);
-	usb_serial_deregister(&edgeport_4port_device);
-	usb_serial_deregister(&edgeport_8port_device);
-	usb_serial_deregister(&epic_device);
-}
-
-module_init(edgeport_init);
-module_exit(edgeport_exit);
-
-/* Module information */
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index 178b22eb32b1..d0e7c9affb6f 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -100,7 +100,6 @@ static struct usb_driver io_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table_combined,
-	.no_dynamic_id = 	1,
 };
 
 static struct usb_serial_driver edgeport_2port_device = {
@@ -109,7 +108,6 @@ static struct usb_serial_driver edgeport_2port_device = {
 		.name		= "edgeport_2",
 	},
 	.description		= "Edgeport 2 port adapter",
-	.usb_driver		= &io_driver,
 	.id_table		= edgeport_2port_id_table,
 	.num_ports		= 2,
 	.open			= edge_open,
@@ -139,7 +137,6 @@ static struct usb_serial_driver edgeport_4port_device = {
 		.name		= "edgeport_4",
 	},
 	.description		= "Edgeport 4 port adapter",
-	.usb_driver		= &io_driver,
 	.id_table		= edgeport_4port_id_table,
 	.num_ports		= 4,
 	.open			= edge_open,
@@ -169,7 +166,6 @@ static struct usb_serial_driver edgeport_8port_device = {
 		.name		= "edgeport_8",
 	},
 	.description		= "Edgeport 8 port adapter",
-	.usb_driver		= &io_driver,
 	.id_table		= edgeport_8port_id_table,
 	.num_ports		= 8,
 	.open			= edge_open,
@@ -199,7 +195,6 @@ static struct usb_serial_driver epic_device = {
 		.name		= "epic",
 	},
 	.description		= "EPiC device",
-	.usb_driver		= &io_driver,
 	.id_table		= Epic_port_id_table,
 	.num_ports		= 1,
 	.open			= edge_open,
@@ -223,5 +218,10 @@ static struct usb_serial_driver epic_device = {
 	.write_bulk_callback	= edge_bulk_out_data_callback,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&edgeport_2port_device, &edgeport_4port_device,
+	&edgeport_8port_device, &epic_device, NULL
+};
+
 #endif
 
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 5818bfc3261e..40a95a7fe383 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -202,7 +202,6 @@ static struct usb_driver io_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table_combined,
-	.no_dynamic_id = 	1,
 };
 
 
@@ -1817,7 +1816,7 @@ static void edge_bulk_out_callback(struct urb *urb)
 		    __func__, status);
 		return;
 	default:
-		dev_err(&urb->dev->dev, "%s - nonzero write bulk status "
+		dev_err_console(port, "%s - nonzero write bulk status "
 			"received: %d\n", __func__, status);
 	}
 
@@ -2111,7 +2110,7 @@ static void edge_send(struct tty_struct *tty)
 	/* send the data out the bulk port */
 	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 	if (result) {
-		dev_err(&port->dev,
+		dev_err_console(port,
 			"%s - failed submitting write urb, error %d\n",
 				__func__, result);
 		edge_port->ep_write_urb_in_use = 0;
@@ -2725,7 +2724,6 @@ static struct usb_serial_driver edgeport_1port_device = {
 		.name		= "edgeport_ti_1",
 	},
 	.description		= "Edgeport TI 1 port adapter",
-	.usb_driver		= &io_driver,
 	.id_table		= edgeport_1port_id_table,
 	.num_ports		= 1,
 	.open			= edge_open,
@@ -2757,7 +2755,6 @@ static struct usb_serial_driver edgeport_2port_device = {
 		.name		= "edgeport_ti_2",
 	},
 	.description		= "Edgeport TI 2 port adapter",
-	.usb_driver		= &io_driver,
 	.id_table		= edgeport_2port_id_table,
 	.num_ports		= 2,
 	.open			= edge_open,
@@ -2782,41 +2779,12 @@ static struct usb_serial_driver edgeport_2port_device = {
 	.write_bulk_callback	= edge_bulk_out_callback,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&edgeport_1port_device, &edgeport_2port_device, NULL
+};
 
-static int __init edgeport_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&edgeport_1port_device);
-	if (retval)
-		goto failed_1port_device_register;
-	retval = usb_serial_register(&edgeport_2port_device);
-	if (retval)
-		goto failed_2port_device_register;
-	retval = usb_register(&io_driver);
-	if (retval)
-		goto failed_usb_register;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&edgeport_2port_device);
-failed_2port_device_register:
-	usb_serial_deregister(&edgeport_1port_device);
-failed_1port_device_register:
-	return retval;
-}
-
-static void __exit edgeport_exit(void)
-{
-	usb_deregister(&io_driver);
-	usb_serial_deregister(&edgeport_1port_device);
-	usb_serial_deregister(&edgeport_2port_device);
-}
-
-module_init(edgeport_init);
-module_exit(edgeport_exit);
+module_usb_serial_driver(io_driver, serial_drivers);
 
-/* Module information */
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 06053a920dd8..10c02b8b5664 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -510,7 +510,6 @@ static struct usb_driver ipaq_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	ipaq_id_table,
-	.no_dynamic_id =	1,
 };
 
 
@@ -521,7 +520,6 @@ static struct usb_serial_driver ipaq_device = {
 		.name =		"ipaq",
 	},
 	.description =		"PocketPC PDA",
-	.usb_driver =		&ipaq_driver,
 	.id_table =		ipaq_id_table,
 	.bulk_in_size =		256,
 	.bulk_out_size =	256,
@@ -530,6 +528,10 @@ static struct usb_serial_driver ipaq_device = {
 	.calc_num_ports =	ipaq_calc_num_ports,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ipaq_device, NULL
+};
+
 static int ipaq_open(struct tty_struct *tty,
 			struct usb_serial_port *port)
 {
@@ -624,30 +626,22 @@ static int ipaq_startup(struct usb_serial *serial)
 static int __init ipaq_init(void)
 {
 	int retval;
-	retval = usb_serial_register(&ipaq_device);
-	if (retval)
-		goto failed_usb_serial_register;
+
 	if (vendor) {
 		ipaq_id_table[0].idVendor = vendor;
 		ipaq_id_table[0].idProduct = product;
 	}
-	retval = usb_register(&ipaq_driver);
-	if (retval)
-		goto failed_usb_register;
-
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&ipaq_device);
-failed_usb_serial_register:
+
+	retval = usb_serial_register_drivers(&ipaq_driver, serial_drivers);
+	if (retval == 0)
+		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+			       DRIVER_DESC "\n");
 	return retval;
 }
 
 static void __exit ipaq_exit(void)
 {
-	usb_deregister(&ipaq_driver);
-	usb_serial_deregister(&ipaq_device);
+	usb_serial_deregister_drivers(&ipaq_driver, serial_drivers);
 }
 
 
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 6f9356f3f99e..76a06406e26a 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -144,7 +144,6 @@ static struct usb_driver usb_ipw_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	usb_ipw_ids,
-	.no_dynamic_id = 	1,
 };
 
 static bool debug;
@@ -318,7 +317,6 @@ static struct usb_serial_driver ipw_device = {
 		.name =		"ipw",
 	},
 	.description =		"IPWireless converter",
-	.usb_driver =		&usb_ipw_driver,
 	.id_table =		usb_ipw_ids,
 	.num_ports =		1,
 	.disconnect =		usb_wwan_disconnect,
@@ -331,33 +329,11 @@ static struct usb_serial_driver ipw_device = {
 	.write =		usb_wwan_write,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ipw_device, NULL
+};
 
-
-static int __init usb_ipw_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&ipw_device);
-	if (retval)
-		return retval;
-	retval = usb_register(&usb_ipw_driver);
-	if (retval) {
-		usb_serial_deregister(&ipw_device);
-		return retval;
-	}
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-}
-
-static void __exit usb_ipw_exit(void)
-{
-	usb_deregister(&usb_ipw_driver);
-	usb_serial_deregister(&ipw_device);
-}
-
-module_init(usb_ipw_init);
-module_exit(usb_ipw_exit);
+module_usb_serial_driver(usb_ipw_driver, serial_drivers);
 
 /* Module information */
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 84a396e83671..84965cd65c76 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -82,7 +82,6 @@ static struct usb_driver ir_driver = {
 	.probe		= usb_serial_probe,
 	.disconnect	= usb_serial_disconnect,
 	.id_table	= ir_id_table,
-	.no_dynamic_id	= 1,
 };
 
 static struct usb_serial_driver ir_device = {
@@ -91,7 +90,6 @@ static struct usb_serial_driver ir_device = {
 		.name	= "ir-usb",
 	},
 	.description		= "IR Dongle",
-	.usb_driver		= &ir_driver,
 	.id_table		= ir_id_table,
 	.num_ports		= 1,
 	.set_termios		= ir_set_termios,
@@ -101,6 +99,10 @@ static struct usb_serial_driver ir_device = {
 	.process_read_urb	= ir_process_read_urb,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ir_device, NULL
+};
+
 static inline void irda_usb_dump_class_desc(struct usb_irda_cs_descriptor *desc)
 {
 	dbg("bLength=%x", desc->bLength);
@@ -445,30 +447,16 @@ static int __init ir_init(void)
 		ir_device.bulk_out_size = buffer_size;
 	}
 
-	retval = usb_serial_register(&ir_device);
-	if (retval)
-		goto failed_usb_serial_register;
-
-	retval = usb_register(&ir_driver);
-	if (retval)
-		goto failed_usb_register;
-
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-
-	return 0;
-
-failed_usb_register:
-	usb_serial_deregister(&ir_device);
-
-failed_usb_serial_register:
+	retval = usb_serial_register_drivers(&ir_driver, serial_drivers);
+	if (retval == 0)
+		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+			       DRIVER_DESC "\n");
 	return retval;
 }
 
 static void __exit ir_exit(void)
 {
-	usb_deregister(&ir_driver);
-	usb_serial_deregister(&ir_device);
+	usb_serial_deregister_drivers(&ir_driver, serial_drivers);
 }
 
 
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 3077a4436976..f2192d527db0 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -56,7 +56,6 @@ static struct usb_driver iuu_driver = {
 	.probe = usb_serial_probe,
 	.disconnect = usb_serial_disconnect,
 	.id_table = id_table,
-	.no_dynamic_id = 1,
 };
 
 /* turbo parameter */
@@ -1274,7 +1273,6 @@ static struct usb_serial_driver iuu_device = {
 		   .name = "iuu_phoenix",
 		   },
 	.id_table = id_table,
-	.usb_driver = &iuu_driver,
 	.num_ports = 1,
 	.bulk_in_size = 512,
 	.bulk_out_size = 512,
@@ -1292,32 +1290,11 @@ static struct usb_serial_driver iuu_device = {
 	.release = iuu_release,
 };
 
-static int __init iuu_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&iuu_device);
-	if (retval)
-		goto failed_usb_serial_register;
-	retval = usb_register(&iuu_driver);
-	if (retval)
-		goto failed_usb_register;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&iuu_device);
-failed_usb_serial_register:
-	return retval;
-}
-
-static void __exit iuu_exit(void)
-{
-	usb_deregister(&iuu_driver);
-	usb_serial_deregister(&iuu_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&iuu_device, NULL
+};
 
-module_init(iuu_init);
-module_exit(iuu_exit);
+module_usb_serial_driver(iuu_driver, serial_drivers);
 
 MODULE_AUTHOR("Alain Degreffe eczema@ecze.com");
 
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 4cc36c761801..a39ddd1b0dca 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -130,53 +130,7 @@ struct keyspan_port_private {
 #include "keyspan_usa67msg.h"
 
 
-/* Functions used by new usb-serial code. */
-static int __init keyspan_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&keyspan_pre_device);
-	if (retval)
-		goto failed_pre_device_register;
-	retval = usb_serial_register(&keyspan_1port_device);
-	if (retval)
-		goto failed_1port_device_register;
-	retval = usb_serial_register(&keyspan_2port_device);
-	if (retval)
-		goto failed_2port_device_register;
-	retval = usb_serial_register(&keyspan_4port_device);
-	if (retval)
-		goto failed_4port_device_register;
-	retval = usb_register(&keyspan_driver);
-	if (retval)
-		goto failed_usb_register;
-
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&keyspan_4port_device);
-failed_4port_device_register:
-	usb_serial_deregister(&keyspan_2port_device);
-failed_2port_device_register:
-	usb_serial_deregister(&keyspan_1port_device);
-failed_1port_device_register:
-	usb_serial_deregister(&keyspan_pre_device);
-failed_pre_device_register:
-	return retval;
-}
-
-static void __exit keyspan_exit(void)
-{
-	usb_deregister(&keyspan_driver);
-	usb_serial_deregister(&keyspan_pre_device);
-	usb_serial_deregister(&keyspan_1port_device);
-	usb_serial_deregister(&keyspan_2port_device);
-	usb_serial_deregister(&keyspan_4port_device);
-}
-
-module_init(keyspan_init);
-module_exit(keyspan_exit);
+module_usb_serial_driver(keyspan_driver, serial_drivers);
 
 static void keyspan_break_ctl(struct tty_struct *tty, int break_state)
 {
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 13fa1d1cc900..622853c9e384 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -492,7 +492,6 @@ static struct usb_driver keyspan_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	keyspan_ids_combined,
-	.no_dynamic_id = 	1,
 };
 
 /* usb_device_id table for the pre-firmware download keyspan devices */
@@ -545,7 +544,6 @@ static struct usb_serial_driver keyspan_pre_device = {
 		.name		= "keyspan_no_firm",
 	},
 	.description		= "Keyspan - (without firmware)",
-	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_pre_ids,
 	.num_ports		= 1,
 	.attach			= keyspan_fake_startup,
@@ -557,7 +555,6 @@ static struct usb_serial_driver keyspan_1port_device = {
 		.name		= "keyspan_1",
 	},
 	.description		= "Keyspan 1 port adapter",
-	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_1port_ids,
 	.num_ports		= 1,
 	.open			= keyspan_open,
@@ -580,7 +577,6 @@ static struct usb_serial_driver keyspan_2port_device = {
 		.name		= "keyspan_2",
 	},
 	.description		= "Keyspan 2 port adapter",
-	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_2port_ids,
 	.num_ports		= 2,
 	.open			= keyspan_open,
@@ -603,7 +599,6 @@ static struct usb_serial_driver keyspan_4port_device = {
 		.name		= "keyspan_4",
 	},
 	.description		= "Keyspan 4 port adapter",
-	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_4port_ids,
 	.num_ports		= 4,
 	.open			= keyspan_open,
@@ -620,4 +615,9 @@ static struct usb_serial_driver keyspan_4port_device = {
 	.release		= keyspan_release,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&keyspan_pre_device, &keyspan_1port_device,
+	&keyspan_2port_device, &keyspan_4port_device, NULL
+};
+
 #endif
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 7c62a7048302..693bcdfcb3d5 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -91,7 +91,6 @@ static struct usb_driver keyspan_pda_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table_combined,
-	.no_dynamic_id = 	1,
 };
 
 static const struct usb_device_id id_table_std[] = {
@@ -779,7 +778,6 @@ static struct usb_serial_driver keyspan_pda_fake_device = {
 		.name =		"keyspan_pda_pre",
 	},
 	.description =		"Keyspan PDA - (prerenumeration)",
-	.usb_driver = 		&keyspan_pda_driver,
 	.id_table =		id_table_fake,
 	.num_ports =		1,
 	.attach =		keyspan_pda_fake_startup,
@@ -793,7 +791,6 @@ static struct usb_serial_driver xircom_pgs_fake_device = {
 		.name =		"xircom_no_firm",
 	},
 	.description =		"Xircom / Entregra PGS - (prerenumeration)",
-	.usb_driver = 		&keyspan_pda_driver,
 	.id_table =		id_table_fake_xircom,
 	.num_ports =		1,
 	.attach =		keyspan_pda_fake_startup,
@@ -806,7 +803,6 @@ static struct usb_serial_driver keyspan_pda_device = {
 		.name =		"keyspan_pda",
 	},
 	.description =		"Keyspan PDA",
-	.usb_driver = 		&keyspan_pda_driver,
 	.id_table =		id_table_std,
 	.num_ports =		1,
 	.dtr_rts =		keyspan_pda_dtr_rts,
@@ -827,61 +823,18 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.release =		keyspan_pda_release,
 };
 
-
-static int __init keyspan_pda_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&keyspan_pda_device);
-	if (retval)
-		goto failed_pda_register;
+static struct usb_serial_driver * const serial_drivers[] = {
+	&keyspan_pda_device,
 #ifdef KEYSPAN
-	retval = usb_serial_register(&keyspan_pda_fake_device);
-	if (retval)
-		goto failed_pda_fake_register;
+	&keyspan_pda_fake_device,
 #endif
 #ifdef XIRCOM
-	retval = usb_serial_register(&xircom_pgs_fake_device);
-	if (retval)
-		goto failed_xircom_register;
-#endif
-	retval = usb_register(&keyspan_pda_driver);
-	if (retval)
-		goto failed_usb_register;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-failed_usb_register:
-#ifdef XIRCOM
-	usb_serial_deregister(&xircom_pgs_fake_device);
-failed_xircom_register:
-#endif /* XIRCOM */
-#ifdef KEYSPAN
-	usb_serial_deregister(&keyspan_pda_fake_device);
-#endif
-#ifdef KEYSPAN
-failed_pda_fake_register:
+	&xircom_pgs_fake_device,
 #endif
-	usb_serial_deregister(&keyspan_pda_device);
-failed_pda_register:
-	return retval;
-}
-
-
-static void __exit keyspan_pda_exit(void)
-{
-	usb_deregister(&keyspan_pda_driver);
-	usb_serial_deregister(&keyspan_pda_device);
-#ifdef KEYSPAN
-	usb_serial_deregister(&keyspan_pda_fake_device);
-#endif
-#ifdef XIRCOM
-	usb_serial_deregister(&xircom_pgs_fake_device);
-#endif
-}
-
+	NULL
+};
 
-module_init(keyspan_pda_init);
-module_exit(keyspan_pda_exit);
+module_usb_serial_driver(keyspan_pda_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
@@ -889,4 +842,3 @@ MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
-
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index fc064e1442ca..10f05407e535 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -91,7 +91,6 @@ static struct usb_driver kl5kusb105d_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id =	1,
 };
 
 static struct usb_serial_driver kl5kusb105d_device = {
@@ -100,7 +99,6 @@ static struct usb_serial_driver kl5kusb105d_device = {
 		.name =		"kl5kusb105d",
 	},
 	.description =		"KL5KUSB105D / PalmConnect",
-	.usb_driver =		&kl5kusb105d_driver,
 	.id_table =		id_table,
 	.num_ports =		1,
 	.bulk_out_size =	64,
@@ -118,6 +116,10 @@ static struct usb_serial_driver kl5kusb105d_device = {
 	.prepare_write_buffer =	klsi_105_prepare_write_buffer,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&kl5kusb105d_device, NULL
+};
+
 struct klsi_105_port_settings {
 	__u8	pktlen;		/* always 5, it seems */
 	__u8	baudrate;
@@ -690,40 +692,11 @@ static int klsi_105_tiocmset(struct tty_struct *tty,
 	return retval;
 }
 
-
-static int __init klsi_105_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&kl5kusb105d_device);
-	if (retval)
-		goto failed_usb_serial_register;
-	retval = usb_register(&kl5kusb105d_driver);
-	if (retval)
-		goto failed_usb_register;
-
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&kl5kusb105d_device);
-failed_usb_serial_register:
-	return retval;
-}
-
-static void __exit klsi_105_exit(void)
-{
-	usb_deregister(&kl5kusb105d_driver);
-	usb_serial_deregister(&kl5kusb105d_device);
-}
-
-
-module_init(klsi_105_init);
-module_exit(klsi_105_exit);
+module_usb_serial_driver(kl5kusb105d_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
-
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "enable extensive debugging messages");
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index a92a3efb507b..4a9a75eb9b95 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -90,7 +90,6 @@ static struct usb_driver kobil_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
 };
 
 
@@ -100,7 +99,6 @@ static struct usb_serial_driver kobil_device = {
 		.name =		"kobil",
 	},
 	.description =		"KOBIL USB smart card terminal",
-	.usb_driver = 		&kobil_driver,
 	.id_table =		id_table,
 	.num_ports =		1,
 	.attach =		kobil_startup,
@@ -117,6 +115,9 @@ static struct usb_serial_driver kobil_device = {
 	.read_int_callback =	kobil_read_int_callback,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&kobil_device, NULL
+};
 
 struct kobil_private {
 	int write_int_endpoint_address;
@@ -682,35 +683,7 @@ static int kobil_ioctl(struct tty_struct *tty,
 	}
 }
 
-static int __init kobil_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&kobil_device);
-	if (retval)
-		goto failed_usb_serial_register;
-	retval = usb_register(&kobil_driver);
-	if (retval)
-		goto failed_usb_register;
-
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&kobil_device);
-failed_usb_serial_register:
-	return retval;
-}
-
-
-static void __exit kobil_exit(void)
-{
-	usb_deregister(&kobil_driver);
-	usb_serial_deregister(&kobil_device);
-}
-
-module_init(kobil_init);
-module_exit(kobil_exit);
+module_usb_serial_driver(kobil_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 27fa9c8a77b0..6edd26130e25 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -88,7 +88,6 @@ static struct usb_driver mct_u232_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table_combined,
-	.no_dynamic_id = 	1,
 };
 
 static struct usb_serial_driver mct_u232_device = {
@@ -97,7 +96,6 @@ static struct usb_serial_driver mct_u232_device = {
 		.name =		"mct_u232",
 	},
 	.description =	     "MCT U232",
-	.usb_driver = 	     &mct_u232_driver,
 	.id_table =	     id_table_combined,
 	.num_ports =	     1,
 	.open =		     mct_u232_open,
@@ -116,6 +114,10 @@ static struct usb_serial_driver mct_u232_device = {
 	.get_icount =        mct_u232_get_icount,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&mct_u232_device, NULL
+};
+
 struct mct_u232_private {
 	spinlock_t lock;
 	unsigned int	     control_state; /* Modem Line Setting (TIOCM) */
@@ -904,33 +906,7 @@ static int  mct_u232_get_icount(struct tty_struct *tty,
 	return 0;
 }
 
-static int __init mct_u232_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&mct_u232_device);
-	if (retval)
-		goto failed_usb_serial_register;
-	retval = usb_register(&mct_u232_driver);
-	if (retval)
-		goto failed_usb_register;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&mct_u232_device);
-failed_usb_serial_register:
-	return retval;
-}
-
-
-static void __exit mct_u232_exit(void)
-{
-	usb_deregister(&mct_u232_driver);
-	usb_serial_deregister(&mct_u232_device);
-}
-
-module_init(mct_u232_init);
-module_exit(mct_u232_exit);
+module_usb_serial_driver(mct_u232_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
new file mode 100644
index 000000000000..6e1622f2a297
--- /dev/null
+++ b/drivers/usb/serial/metro-usb.c
@@ -0,0 +1,402 @@
+/*
+  Some of this code is credited to Linux USB open source files that are
+  distributed with Linux.
+
+  Copyright:	2007 Metrologic Instruments. All rights reserved.
+  Copyright:	2011 Azimut Ltd. <http://azimutrzn.ru/>
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/uaccess.h>
+#include <linux/usb/serial.h>
+
+/* Version Information */
+#define DRIVER_VERSION "v1.2.0.0"
+#define DRIVER_DESC "Metrologic Instruments Inc. - USB-POS driver"
+
+/* Product information. */
+#define FOCUS_VENDOR_ID			0x0C2E
+#define FOCUS_PRODUCT_ID		0x0720
+#define FOCUS_PRODUCT_ID_UNI		0x0710
+
+#define METROUSB_SET_REQUEST_TYPE	0x40
+#define METROUSB_SET_MODEM_CTRL_REQUEST	10
+#define METROUSB_SET_BREAK_REQUEST	0x40
+#define METROUSB_MCR_NONE		0x08	/* Deactivate DTR and RTS. */
+#define METROUSB_MCR_RTS		0x0a	/* Activate RTS. */
+#define METROUSB_MCR_DTR		0x09	/* Activate DTR. */
+#define WDR_TIMEOUT			5000	/* default urb timeout. */
+
+/* Private data structure. */
+struct metrousb_private {
+	spinlock_t lock;
+	int throttled;
+	unsigned long control_state;
+};
+
+/* Device table list. */
+static struct usb_device_id id_table[] = {
+	{ USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID) },
+	{ USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) },
+	{ }, /* Terminating entry. */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* Input parameter constants. */
+static bool debug;
+
+static void metrousb_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+	struct tty_struct *tty;
+	unsigned char *data = urb->transfer_buffer;
+	int throttled = 0;
+	int result = 0;
+	unsigned long flags = 0;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	switch (urb->status) {
+	case 0:
+		/* Success status, read from the port. */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* urb has been terminated. */
+		dev_dbg(&port->dev,
+			"%s - urb shutting down, error code=%d\n",
+			__func__, result);
+		return;
+	default:
+		dev_dbg(&port->dev,
+			"%s - non-zero urb received, error code=%d\n",
+			__func__, result);
+		goto exit;
+	}
+
+
+	/* Set the data read from the usb port into the serial port buffer. */
+	tty = tty_port_tty_get(&port->port);
+	if (!tty) {
+		dev_dbg(&port->dev, "%s - bad tty pointer - exiting\n",
+			__func__);
+		return;
+	}
+
+	if (tty && urb->actual_length) {
+		/* Loop through the data copying each byte to the tty layer. */
+		tty_insert_flip_string(tty, data, urb->actual_length);
+
+		/* Force the data to the tty layer. */
+		tty_flip_buffer_push(tty);
+	}
+	tty_kref_put(tty);
+
+	/* Set any port variables. */
+	spin_lock_irqsave(&metro_priv->lock, flags);
+	throttled = metro_priv->throttled;
+	spin_unlock_irqrestore(&metro_priv->lock, flags);
+
+	/* Continue trying to read if set. */
+	if (!throttled) {
+		usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
+				 usb_rcvintpipe(port->serial->dev, port->interrupt_in_endpointAddress),
+				 port->interrupt_in_urb->transfer_buffer,
+				 port->interrupt_in_urb->transfer_buffer_length,
+				 metrousb_read_int_callback, port, 1);
+
+		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+
+		if (result)
+			dev_dbg(&port->dev,
+				"%s - failed submitting interrupt in urb, error code=%d\n",
+				__func__, result);
+	}
+	return;
+
+exit:
+	/* Try to resubmit the urb. */
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result)
+		dev_dbg(&port->dev,
+			"%s - failed submitting interrupt in urb, error code=%d\n",
+			__func__, result);
+}
+
+static void metrousb_cleanup(struct usb_serial_port *port)
+{
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	if (port->serial->dev) {
+		/* Shutdown any interrupt in urbs. */
+		if (port->interrupt_in_urb) {
+			usb_unlink_urb(port->interrupt_in_urb);
+			usb_kill_urb(port->interrupt_in_urb);
+		}
+	}
+}
+
+static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+	unsigned long flags = 0;
+	int result = 0;
+
+	dev_dbg(&port->dev, "%s\n", __func__);
+
+	/* Make sure the urb is initialized. */
+	if (!port->interrupt_in_urb) {
+		dev_dbg(&port->dev, "%s - interrupt urb not initialized\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	/* Set the private data information for the port. */
+	spin_lock_irqsave(&metro_priv->lock, flags);
+	metro_priv->control_state = 0;
+	metro_priv->throttled = 0;
+	spin_unlock_irqrestore(&metro_priv->lock, flags);
+
+	/*
+	 * Force low_latency on so that our tty_push actually forces the data
+	 * through, otherwise it is scheduled, and with high data rates (like
+	 * with OHCI) data can get lost.
+	 */
+	if (tty)
+		tty->low_latency = 1;
+
+	/* Clear the urb pipe. */
+	usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe);
+
+	/* Start reading from the device */
+	usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
+			  usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
+			   port->interrupt_in_urb->transfer_buffer,
+			   port->interrupt_in_urb->transfer_buffer_length,
+			   metrousb_read_int_callback, port, 1);
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+
+	if (result) {
+		dev_dbg(&port->dev,
+			"%s - failed submitting interrupt in urb, error code=%d\n",
+			__func__, result);
+		goto exit;
+	}
+
+	dev_dbg(&port->dev, "%s - port open\n", __func__);
+exit:
+	return result;
+}
+
+static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int control_state)
+{
+	int retval = 0;
+	unsigned char mcr = METROUSB_MCR_NONE;
+
+	dev_dbg(&serial->dev->dev, "%s - control state = %d\n",
+		__func__, control_state);
+
+	/* Set the modem control value. */
+	if (control_state & TIOCM_DTR)
+		mcr |= METROUSB_MCR_DTR;
+	if (control_state & TIOCM_RTS)
+		mcr |= METROUSB_MCR_RTS;
+
+	/* Send the command to the usb port. */
+	retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+				METROUSB_SET_REQUEST_TYPE, METROUSB_SET_MODEM_CTRL_REQUEST,
+				control_state, 0, NULL, 0, WDR_TIMEOUT);
+	if (retval < 0)
+		dev_dbg(&serial->dev->dev,
+			"%s - set modem ctrl=0x%x failed, error code=%d\n",
+			__func__, mcr, retval);
+
+	return retval;
+}
+
+static void metrousb_shutdown(struct usb_serial *serial)
+{
+	int i = 0;
+
+	dev_dbg(&serial->dev->dev, "%s\n", __func__);
+
+	/* Stop reading and writing on all ports. */
+	for (i = 0; i < serial->num_ports; ++i) {
+		/* Close any open urbs. */
+		metrousb_cleanup(serial->port[i]);
+
+		/* Free memory. */
+		kfree(usb_get_serial_port_data(serial->port[i]));
+		usb_set_serial_port_data(serial->port[i], NULL);
+
+		dev_dbg(&serial->dev->dev, "%s - freed port number=%d\n",
+			__func__, serial->port[i]->number);
+	}
+}
+
+static int metrousb_startup(struct usb_serial *serial)
+{
+	struct metrousb_private *metro_priv;
+	struct usb_serial_port *port;
+	int i = 0;
+
+	dev_dbg(&serial->dev->dev, "%s\n", __func__);
+
+	/* Loop through the serial ports setting up the private structures.
+	 * Currently we only use one port. */
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+
+		/* Declare memory. */
+		metro_priv = kzalloc(sizeof(struct metrousb_private), GFP_KERNEL);
+		if (!metro_priv)
+			return -ENOMEM;
+
+		/* Initialize memory. */
+		spin_lock_init(&metro_priv->lock);
+		usb_set_serial_port_data(port, metro_priv);
+
+		dev_dbg(&serial->dev->dev, "%s - port number=%d\n ",
+			__func__, port->number);
+	}
+
+	return 0;
+}
+
+static void metrousb_throttle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+	unsigned long flags = 0;
+
+	dev_dbg(tty->dev, "%s\n", __func__);
+
+	/* Set the private information for the port to stop reading data. */
+	spin_lock_irqsave(&metro_priv->lock, flags);
+	metro_priv->throttled = 1;
+	spin_unlock_irqrestore(&metro_priv->lock, flags);
+}
+
+static int metrousb_tiocmget(struct tty_struct *tty)
+{
+	unsigned long control_state = 0;
+	struct usb_serial_port *port = tty->driver_data;
+	struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+	unsigned long flags = 0;
+
+	dev_dbg(tty->dev, "%s\n", __func__);
+
+	spin_lock_irqsave(&metro_priv->lock, flags);
+	control_state = metro_priv->control_state;
+	spin_unlock_irqrestore(&metro_priv->lock, flags);
+
+	return control_state;
+}
+
+static int metrousb_tiocmset(struct tty_struct *tty,
+			     unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
+	struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+	unsigned long flags = 0;
+	unsigned long control_state = 0;
+
+	dev_dbg(tty->dev, "%s - set=%d, clear=%d\n", __func__, set, clear);
+
+	spin_lock_irqsave(&metro_priv->lock, flags);
+	control_state = metro_priv->control_state;
+
+	/* Set the RTS and DTR values. */
+	if (set & TIOCM_RTS)
+		control_state |= TIOCM_RTS;
+	if (set & TIOCM_DTR)
+		control_state |= TIOCM_DTR;
+	if (clear & TIOCM_RTS)
+		control_state &= ~TIOCM_RTS;
+	if (clear & TIOCM_DTR)
+		control_state &= ~TIOCM_DTR;
+
+	metro_priv->control_state = control_state;
+	spin_unlock_irqrestore(&metro_priv->lock, flags);
+	return metrousb_set_modem_ctrl(serial, control_state);
+}
+
+static void metrousb_unthrottle(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
+	unsigned long flags = 0;
+	int result = 0;
+
+	dev_dbg(tty->dev, "%s\n", __func__);
+
+	/* Set the private information for the port to resume reading data. */
+	spin_lock_irqsave(&metro_priv->lock, flags);
+	metro_priv->throttled = 0;
+	spin_unlock_irqrestore(&metro_priv->lock, flags);
+
+	/* Submit the urb to read from the port. */
+	port->interrupt_in_urb->dev = port->serial->dev;
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+	if (result)
+		dev_dbg(tty->dev,
+			"failed submitting interrupt in urb error code=%d\n",
+			result);
+}
+
+static struct usb_driver metrousb_driver = {
+	.name =		"metro-usb",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table
+};
+
+static struct usb_serial_driver metrousb_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"metro-usb",
+	},
+	.description		= "Metrologic USB to serial converter.",
+	.id_table		= id_table,
+	.num_ports		= 1,
+	.open			= metrousb_open,
+	.close			= metrousb_cleanup,
+	.read_int_callback	= metrousb_read_int_callback,
+	.attach			= metrousb_startup,
+	.release		= metrousb_shutdown,
+	.throttle		= metrousb_throttle,
+	.unthrottle		= metrousb_unthrottle,
+	.tiocmget		= metrousb_tiocmget,
+	.tiocmset		= metrousb_tiocmset,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&metrousb_device,
+	NULL,
+};
+
+module_usb_serial_driver(metrousb_driver, serial_drivers);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Philip Nicastro");
+MODULE_AUTHOR("Aleksey Babahin <tamerlan311@gmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+
+/* Module input parameters */
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Print debug info (bool 1=on, 0=off)");
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 4554ee49e635..bdce82034122 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1294,7 +1294,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
 		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
 					       GFP_KERNEL);
 		if (urb->transfer_buffer == NULL) {
-			dev_err(&port->dev, "%s no more kernel memory...\n",
+			dev_err_console(port, "%s no more kernel memory...\n",
 				__func__);
 			goto exit;
 		}
@@ -1315,7 +1315,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
 	/* send it down the pipe */
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
-		dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
+		dev_err_console(port, "%s - usb_submit_urb(write bulk) failed "
 			"with status = %d\n", __func__, status);
 		bytes_sent = status;
 		goto exit;
@@ -2169,7 +2169,6 @@ static struct usb_driver usb_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	moschip_port_id_table,
-	.no_dynamic_id =	1,
 };
 
 static struct usb_serial_driver moschip7720_2port_driver = {
@@ -2178,7 +2177,6 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 		.name =		"moschip7720",
 	},
 	.description		= "Moschip 2 port adapter",
-	.usb_driver		= &usb_driver,
 	.id_table		= moschip_port_id_table,
 	.calc_num_ports		= mos77xx_calc_num_ports,
 	.open			= mos7720_open,
@@ -2201,44 +2199,12 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.read_int_callback	= NULL  /* dynamically assigned in probe() */
 };
 
-static int __init moschip7720_init(void)
-{
-	int retval;
-
-	dbg("%s: Entering ..........", __func__);
-
-	/* Register with the usb serial */
-	retval = usb_serial_register(&moschip7720_2port_driver);
-	if (retval)
-		goto failed_port_device_register;
-
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-
-	/* Register with the usb */
-	retval = usb_register(&usb_driver);
-	if (retval)
-		goto failed_usb_register;
-
-	return 0;
-
-failed_usb_register:
-	usb_serial_deregister(&moschip7720_2port_driver);
-
-failed_port_device_register:
-	return retval;
-}
-
-static void __exit moschip7720_exit(void)
-{
-	usb_deregister(&usb_driver);
-	usb_serial_deregister(&moschip7720_2port_driver);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&moschip7720_2port_driver, NULL
+};
 
-module_init(moschip7720_init);
-module_exit(moschip7720_exit);
+module_usb_serial_driver(usb_driver, serial_drivers);
 
-/* Module information */
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 03b5e249e95e..c526550694a0 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -174,6 +174,7 @@
 
 #define CLK_MULTI_REGISTER         ((__u16)(0x02))
 #define CLK_START_VALUE_REGISTER   ((__u16)(0x03))
+#define GPIO_REGISTER              ((__u16)(0x07))
 
 #define SERIAL_LCR_DLAB            ((__u16)(0x0080))
 
@@ -1101,14 +1102,25 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	mos7840_port->read_urb = port->read_urb;
 
 	/* set up our bulk in urb */
-
-	usb_fill_bulk_urb(mos7840_port->read_urb,
-			  serial->dev,
-			  usb_rcvbulkpipe(serial->dev,
-					  port->bulk_in_endpointAddress),
-			  port->bulk_in_buffer,
-			  mos7840_port->read_urb->transfer_buffer_length,
-			  mos7840_bulk_in_callback, mos7840_port);
+	if ((serial->num_ports == 2)
+		&& ((((__u16)port->number -
+			(__u16)(port->serial->minor)) % 2) != 0)) {
+		usb_fill_bulk_urb(mos7840_port->read_urb,
+			serial->dev,
+			usb_rcvbulkpipe(serial->dev,
+				(port->bulk_in_endpointAddress) + 2),
+			port->bulk_in_buffer,
+			mos7840_port->read_urb->transfer_buffer_length,
+			mos7840_bulk_in_callback, mos7840_port);
+	} else {
+		usb_fill_bulk_urb(mos7840_port->read_urb,
+			serial->dev,
+			usb_rcvbulkpipe(serial->dev,
+				port->bulk_in_endpointAddress),
+			port->bulk_in_buffer,
+			mos7840_port->read_urb->transfer_buffer_length,
+			mos7840_bulk_in_callback, mos7840_port);
+	}
 
 	dbg("mos7840_open: bulkin endpoint is %d",
 	    port->bulk_in_endpointAddress);
@@ -1509,7 +1521,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 		    kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
 
 		if (urb->transfer_buffer == NULL) {
-			dev_err(&port->dev, "%s no more kernel memory...\n",
+			dev_err_console(port, "%s no more kernel memory...\n",
 				__func__);
 			goto exit;
 		}
@@ -1519,13 +1531,25 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	memcpy(urb->transfer_buffer, current_position, transfer_size);
 
 	/* fill urb with data and submit  */
-	usb_fill_bulk_urb(urb,
-			  serial->dev,
-			  usb_sndbulkpipe(serial->dev,
-					  port->bulk_out_endpointAddress),
-			  urb->transfer_buffer,
-			  transfer_size,
-			  mos7840_bulk_out_data_callback, mos7840_port);
+	if ((serial->num_ports == 2)
+		&& ((((__u16)port->number -
+			(__u16)(port->serial->minor)) % 2) != 0)) {
+		usb_fill_bulk_urb(urb,
+			serial->dev,
+			usb_sndbulkpipe(serial->dev,
+				(port->bulk_out_endpointAddress) + 2),
+			urb->transfer_buffer,
+			transfer_size,
+			mos7840_bulk_out_data_callback, mos7840_port);
+	} else {
+		usb_fill_bulk_urb(urb,
+			serial->dev,
+			usb_sndbulkpipe(serial->dev,
+				port->bulk_out_endpointAddress),
+			urb->transfer_buffer,
+			transfer_size,
+			mos7840_bulk_out_data_callback, mos7840_port);
+	}
 
 	data1 = urb->transfer_buffer;
 	dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
@@ -1535,7 +1559,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	if (status) {
 		mos7840_port->busy[i] = 0;
-		dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
+		dev_err_console(port, "%s - usb_submit_urb(write bulk) failed "
 			"with status = %d\n", __func__, status);
 		bytes_sent = status;
 		goto exit;
@@ -1838,7 +1862,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 
 	} else {
 #ifdef HW_flow_control
-		/ *setting h/w flow control bit to 0 */
+		/* setting h/w flow control bit to 0 */
 		Data = 0xb;
 		mos7840_port->shadowMCR = Data;
 		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
@@ -2305,19 +2329,26 @@ static int mos7840_ioctl(struct tty_struct *tty,
 
 static int mos7840_calc_num_ports(struct usb_serial *serial)
 {
-	int mos7840_num_ports = 0;
-
-	dbg("numberofendpoints: cur %d, alt %d",
-	    (int)serial->interface->cur_altsetting->desc.bNumEndpoints,
-	    (int)serial->interface->altsetting->desc.bNumEndpoints);
-	if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) {
-		mos7840_num_ports = serial->num_ports = 2;
-	} else if (serial->interface->cur_altsetting->desc.bNumEndpoints == 9) {
+	__u16 Data = 0x00;
+	int ret = 0;
+	int mos7840_num_ports;
+
+	ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+		MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &Data,
+		VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+
+	if ((Data & 0x01) == 0) {
+		mos7840_num_ports = 2;
+		serial->num_bulk_in = 2;
+		serial->num_bulk_out = 2;
+		serial->num_ports = 2;
+	} else {
+		mos7840_num_ports = 4;
 		serial->num_bulk_in = 4;
 		serial->num_bulk_out = 4;
-		mos7840_num_ports = serial->num_ports = 4;
+		serial->num_ports = 4;
 	}
-	dbg ("mos7840_num_ports = %d", mos7840_num_ports);
+
 	return mos7840_num_ports;
 }
 
@@ -2638,7 +2669,6 @@ static struct usb_driver io_driver = {
 	.probe = usb_serial_probe,
 	.disconnect = usb_serial_disconnect,
 	.id_table = moschip_id_table_combined,
-	.no_dynamic_id = 1,
 };
 
 static struct usb_serial_driver moschip7840_4port_device = {
@@ -2647,7 +2677,6 @@ static struct usb_serial_driver moschip7840_4port_device = {
 		   .name = "mos7840",
 		   },
 	.description = DRIVER_DESC,
-	.usb_driver = &io_driver,
 	.id_table = moschip_port_id_table,
 	.num_ports = 4,
 	.open = mos7840_open,
@@ -2674,57 +2703,12 @@ static struct usb_serial_driver moschip7840_4port_device = {
 	.read_int_callback = mos7840_interrupt_callback,
 };
 
-/****************************************************************************
- * moschip7840_init
- *	This is called by the module subsystem, or on startup to initialize us
- ****************************************************************************/
-static int __init moschip7840_init(void)
-{
-	int retval;
-
-	dbg("%s", " mos7840_init :entering..........");
-
-	/* Register with the usb serial */
-	retval = usb_serial_register(&moschip7840_4port_device);
-
-	if (retval)
-		goto failed_port_device_register;
-
-	dbg("%s", "Entering...");
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-
-	/* Register with the usb */
-	retval = usb_register(&io_driver);
-	if (retval == 0) {
-		dbg("%s", "Leaving...");
-		return 0;
-	}
-	usb_serial_deregister(&moschip7840_4port_device);
-failed_port_device_register:
-	return retval;
-}
-
-/****************************************************************************
- * moschip7840_exit
- *	Called when the driver is about to be unloaded.
- ****************************************************************************/
-static void __exit moschip7840_exit(void)
-{
-
-	dbg("%s", " mos7840_exit :entering..........");
-
-	usb_deregister(&io_driver);
-
-	usb_serial_deregister(&moschip7840_4port_device);
-
-	dbg("%s", "Entering...");
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&moschip7840_4port_device, NULL
+};
 
-module_init(moschip7840_init);
-module_exit(moschip7840_exit);
+module_usb_serial_driver(io_driver, serial_drivers);
 
-/* Module information */
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
index e2bfecc46402..3ab6214b4bbf 100644
--- a/drivers/usb/serial/moto_modem.c
+++ b/drivers/usb/serial/moto_modem.c
@@ -36,7 +36,6 @@ static struct usb_driver moto_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
 };
 
 static struct usb_serial_driver moto_device = {
@@ -45,29 +44,12 @@ static struct usb_serial_driver moto_device = {
 		.name =		"moto-modem",
 	},
 	.id_table =		id_table,
-	.usb_driver =		&moto_driver,
 	.num_ports =		1,
 };
 
-static int __init moto_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&moto_device);
-	if (retval)
-		return retval;
-	retval = usb_register(&moto_driver);
-	if (retval)
-		usb_serial_deregister(&moto_device);
-	return retval;
-}
-
-static void __exit moto_exit(void)
-{
-	usb_deregister(&moto_driver);
-	usb_serial_deregister(&moto_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&moto_device, NULL
+};
 
-module_init(moto_init);
-module_exit(moto_exit);
+module_usb_serial_driver(moto_driver, serial_drivers);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index b28f1db0195f..29ab6eb5b536 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -35,7 +35,6 @@ static struct usb_driver navman_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
 };
 
 static void navman_read_int_callback(struct urb *urb)
@@ -122,7 +121,6 @@ static struct usb_serial_driver navman_device = {
 		.name =		"navman",
 	},
 	.id_table =		id_table,
-	.usb_driver =		&navman_driver,
 	.num_ports =		1,
 	.open =			navman_open,
 	.close = 		navman_close,
@@ -130,27 +128,12 @@ static struct usb_serial_driver navman_device = {
 	.read_int_callback =	navman_read_int_callback,
 };
 
-static int __init navman_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&navman_device);
-	if (retval)
-		return retval;
-	retval = usb_register(&navman_driver);
-	if (retval)
-		usb_serial_deregister(&navman_device);
-	return retval;
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&navman_device, NULL
+};
 
-static void __exit navman_exit(void)
-{
-	usb_deregister(&navman_driver);
-	usb_serial_deregister(&navman_device);
-}
+module_usb_serial_driver(navman_driver, serial_drivers);
 
-module_init(navman_init);
-module_exit(navman_exit);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 8b8d58a2ac12..88dc785bb298 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -62,7 +62,6 @@ static struct usb_driver omninet_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
 };
 
 
@@ -72,7 +71,6 @@ static struct usb_serial_driver zyxel_omninet_device = {
 		.name =		"omninet",
 	},
 	.description =		"ZyXEL - omni.net lcd plus usb",
-	.usb_driver =		&omninet_driver,
 	.id_table =		id_table,
 	.num_ports =		1,
 	.attach =		omninet_attach,
@@ -86,6 +84,10 @@ static struct usb_serial_driver zyxel_omninet_device = {
 	.release =		omninet_release,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&zyxel_omninet_device, NULL
+};
+
 
 /* The protocol.
  *
@@ -254,7 +256,7 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 	result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
 	if (result) {
 		set_bit(0, &wport->write_urbs_free);
-		dev_err(&port->dev,
+		dev_err_console(port,
 			"%s - failed submitting write urb, error %d\n",
 			__func__, result);
 	} else
@@ -319,35 +321,7 @@ static void omninet_release(struct usb_serial *serial)
 	kfree(usb_get_serial_port_data(port));
 }
 
-
-static int __init omninet_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&zyxel_omninet_device);
-	if (retval)
-		goto failed_usb_serial_register;
-	retval = usb_register(&omninet_driver);
-	if (retval)
-		goto failed_usb_register;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&zyxel_omninet_device);
-failed_usb_serial_register:
-	return retval;
-}
-
-
-static void __exit omninet_exit(void)
-{
-	usb_deregister(&omninet_driver);
-	usb_serial_deregister(&zyxel_omninet_device);
-}
-
-
-module_init(omninet_init);
-module_exit(omninet_exit);
+module_usb_serial_driver(omninet_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 262ded9e076b..82cc9d202b83 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -604,7 +604,6 @@ static struct usb_driver opticon_driver = {
 	.suspend =	opticon_suspend,
 	.resume =	opticon_resume,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
 };
 
 static struct usb_serial_driver opticon_device = {
@@ -613,7 +612,6 @@ static struct usb_serial_driver opticon_device = {
 		.name =		"opticon",
 	},
 	.id_table =		id_table,
-	.usb_driver = 		&opticon_driver,
 	.num_ports =		1,
 	.attach =		opticon_startup,
 	.open =			opticon_open,
@@ -629,27 +627,12 @@ static struct usb_serial_driver opticon_device = {
 	.tiocmset =		opticon_tiocmset,
 };
 
-static int __init opticon_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&opticon_device);
-	if (retval)
-		return retval;
-	retval = usb_register(&opticon_driver);
-	if (retval)
-		usb_serial_deregister(&opticon_device);
-	return retval;
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&opticon_device, NULL
+};
 
-static void __exit opticon_exit(void)
-{
-	usb_deregister(&opticon_driver);
-	usb_serial_deregister(&opticon_device);
-}
+module_usb_serial_driver(opticon_driver, serial_drivers);
 
-module_init(opticon_init);
-module_exit(opticon_exit);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index b54afceb9611..6815701cf656 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -307,6 +307,9 @@ static void option_instat_callback(struct urb *urb);
 #define TELIT_VENDOR_ID				0x1bc7
 #define TELIT_PRODUCT_UC864E			0x1003
 #define TELIT_PRODUCT_UC864G			0x1004
+#define TELIT_PRODUCT_CC864_DUAL		0x1005
+#define TELIT_PRODUCT_CC864_SINGLE		0x1006
+#define TELIT_PRODUCT_DE910_DUAL		0x1010
 
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
@@ -484,6 +487,9 @@ static void option_instat_callback(struct urb *urb);
 #define LG_VENDOR_ID				0x1004
 #define LG_PRODUCT_L02C				0x618f
 
+/* MediaTek products */
+#define MEDIATEK_VENDOR_ID			0x0e8d
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -768,6 +774,9 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
@@ -892,6 +901,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
@@ -1198,6 +1209,10 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) },        /* MediaTek MT6276M modem & app port */
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -1212,7 +1227,6 @@ static struct usb_driver option_driver = {
 	.supports_autosuspend =	1,
 #endif
 	.id_table   = option_ids,
-	.no_dynamic_id = 	1,
 };
 
 /* The card has three separate interfaces, which the serial driver
@@ -1225,7 +1239,6 @@ static struct usb_serial_driver option_1port_device = {
 		.name =		"option1",
 	},
 	.description       = "GSM modem (1-port)",
-	.usb_driver        = &option_driver,
 	.id_table          = option_ids,
 	.num_ports         = 1,
 	.probe             = option_probe,
@@ -1249,6 +1262,10 @@ static struct usb_serial_driver option_1port_device = {
 #endif
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&option_1port_device, NULL
+};
+
 static bool debug;
 
 /* per port private data */
@@ -1280,36 +1297,7 @@ struct option_port_private {
 	unsigned long tx_start_time[N_OUT_URB];
 };
 
-/* Functions used by new usb-serial code. */
-static int __init option_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&option_1port_device);
-	if (retval)
-		goto failed_1port_device_register;
-	retval = usb_register(&option_driver);
-	if (retval)
-		goto failed_driver_register;
-
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-
-	return 0;
-
-failed_driver_register:
-	usb_serial_deregister(&option_1port_device);
-failed_1port_device_register:
-	return retval;
-}
-
-static void __exit option_exit(void)
-{
-	usb_deregister(&option_driver);
-	usb_serial_deregister(&option_1port_device);
-}
-
-module_init(option_init);
-module_exit(option_exit);
+module_usb_serial_driver(option_driver, serial_drivers);
 
 static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,
 			   const struct option_blacklist_info *blacklist)
@@ -1360,6 +1348,7 @@ static int option_probe(struct usb_serial *serial,
 		serial->interface->cur_altsetting->desc.bInterfaceNumber,
 		OPTION_BLACKLIST_RESERVED_IF,
 		(const struct option_blacklist_info *) id->driver_info))
+		return -ENODEV;
 
 	/* Don't bind network interface on Samsung GT-B3730, it is handled by a separate module */
 	if (serial->dev->descriptor.idVendor == SAMSUNG_VENDOR_ID &&
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index e287fd32682c..5fdc33c6a3c0 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -71,7 +71,6 @@ static struct usb_driver oti6858_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
 };
 
 static bool debug;
@@ -157,7 +156,6 @@ static struct usb_serial_driver oti6858_device = {
 		.name =		"oti6858",
 	},
 	.id_table =		id_table,
-	.usb_driver =		&oti6858_driver,
 	.num_ports =		1,
 	.open =			oti6858_open,
 	.close =		oti6858_close,
@@ -176,6 +174,10 @@ static struct usb_serial_driver oti6858_device = {
 	.release =		oti6858_release,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&oti6858_device, NULL
+};
+
 struct oti6858_private {
 	spinlock_t lock;
 
@@ -302,7 +304,7 @@ static void send_data(struct work_struct *work)
 	if (count != 0) {
 		allow = kmalloc(1, GFP_KERNEL);
 		if (!allow) {
-			dev_err(&port->dev, "%s(): kmalloc failed\n",
+			dev_err_console(port, "%s(): kmalloc failed\n",
 					__func__);
 			return;
 		}
@@ -334,7 +336,7 @@ static void send_data(struct work_struct *work)
 	port->write_urb->transfer_buffer_length = count;
 	result = usb_submit_urb(port->write_urb, GFP_NOIO);
 	if (result != 0) {
-		dev_err(&port->dev, "%s(): usb_submit_urb() failed"
+		dev_err_console(port, "%s(): usb_submit_urb() failed"
 			       " with error %d\n", __func__, result);
 		priv->flags.write_urb_in_use = 0;
 	}
@@ -938,7 +940,7 @@ static void oti6858_write_bulk_callback(struct urb *urb)
 		port->write_urb->transfer_buffer_length = 1;
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (result) {
-			dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
+			dev_err_console(port, "%s(): usb_submit_urb() failed,"
 					" error %d\n", __func__, result);
 		} else {
 			return;
@@ -956,29 +958,7 @@ static void oti6858_write_bulk_callback(struct urb *urb)
 	}
 }
 
-/* module description and (de)initialization */
-
-static int __init oti6858_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&oti6858_device);
-	if (retval == 0) {
-		retval = usb_register(&oti6858_driver);
-		if (retval)
-			usb_serial_deregister(&oti6858_device);
-	}
-	return retval;
-}
-
-static void __exit oti6858_exit(void)
-{
-	usb_deregister(&oti6858_driver);
-	usb_serial_deregister(&oti6858_device);
-}
-
-module_init(oti6858_init);
-module_exit(oti6858_exit);
+module_usb_serial_driver(oti6858_driver, serial_drivers);
 
 MODULE_DESCRIPTION(OTI6858_DESCRIPTION);
 MODULE_AUTHOR(OTI6858_AUTHOR);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 3d8cda57ce7a..ff4a174fa5de 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -104,7 +104,6 @@ static struct usb_driver pl2303_driver = {
 	.id_table =	id_table,
 	.suspend =      usb_serial_suspend,
 	.resume =       usb_serial_resume,
-	.no_dynamic_id = 	1,
 	.supports_autosuspend =	1,
 };
 
@@ -834,7 +833,6 @@ static struct usb_serial_driver pl2303_device = {
 		.name =		"pl2303",
 	},
 	.id_table =		id_table,
-	.usb_driver = 		&pl2303_driver,
 	.num_ports =		1,
 	.bulk_in_size =		256,
 	.bulk_out_size =	256,
@@ -853,32 +851,11 @@ static struct usb_serial_driver pl2303_device = {
 	.release =		pl2303_release,
 };
 
-static int __init pl2303_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&pl2303_device);
-	if (retval)
-		goto failed_usb_serial_register;
-	retval = usb_register(&pl2303_driver);
-	if (retval)
-		goto failed_usb_register;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&pl2303_device);
-failed_usb_serial_register:
-	return retval;
-}
-
-static void __exit pl2303_exit(void)
-{
-	usb_deregister(&pl2303_driver);
-	usb_serial_deregister(&pl2303_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&pl2303_device, NULL
+};
 
-module_init(pl2303_init);
-module_exit(pl2303_exit);
+module_usb_serial_driver(pl2303_driver, serial_drivers);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index a34819884c1a..966245680f55 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -82,7 +82,6 @@ static struct usb_driver qcaux_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
 };
 
 static struct usb_serial_driver qcaux_device = {
@@ -91,29 +90,12 @@ static struct usb_serial_driver qcaux_device = {
 		.name =		"qcaux",
 	},
 	.id_table =		id_table,
-	.usb_driver =		&qcaux_driver,
 	.num_ports =		1,
 };
 
-static int __init qcaux_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&qcaux_device);
-	if (retval)
-		return retval;
-	retval = usb_register(&qcaux_driver);
-	if (retval)
-		usb_serial_deregister(&qcaux_device);
-	return retval;
-}
-
-static void __exit qcaux_exit(void)
-{
-	usb_deregister(&qcaux_driver);
-	usb_serial_deregister(&qcaux_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&qcaux_device, NULL
+};
 
-module_init(qcaux_init);
-module_exit(qcaux_exit);
+module_usb_serial_driver(qcaux_driver, serial_drivers);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index f98800f2324c..0206b10c9e6e 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -24,39 +24,44 @@
 
 static bool debug;
 
+#define DEVICE_G1K(v, p) \
+	USB_DEVICE(v, p), .driver_info = 1
+
 static const struct usb_device_id id_table[] = {
-	{USB_DEVICE(0x05c6, 0x9211)},	/* Acer Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
-	{USB_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
-	{USB_DEVICE(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
-	{USB_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Mobile Broadband Module */
-	{USB_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
-	{USB_DEVICE(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
-	{USB_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */
-	{USB_DEVICE(0x413c, 0x8171)},	/* Dell Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
-	{USB_DEVICE(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa010)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa011)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa012)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa013)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa014)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
-	{USB_DEVICE(0x0b05, 0x1774)},	/* Asus Gobi QDL device */
-	{USB_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
-	{USB_DEVICE(0x19d2, 0xfff2)},	/* ONDA Gobi QDL device */
-	{USB_DEVICE(0x1557, 0x0a80)},	/* OQO Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9008)},	/* Generic Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9009)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9201)},	/* Generic Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
-	{USB_DEVICE(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
+	/* Gobi 1000 devices */
+	{DEVICE_G1K(0x05c6, 0x9211)},	/* Acer Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
+	{DEVICE_G1K(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
+	{DEVICE_G1K(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
+	{DEVICE_G1K(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
+	{DEVICE_G1K(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
+	{DEVICE_G1K(0x413c, 0x8172)},	/* Dell Gobi Modem device */
+	{DEVICE_G1K(0x413c, 0x8171)},	/* Dell Gobi QDL device */
+	{DEVICE_G1K(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
+	{DEVICE_G1K(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
+	{DEVICE_G1K(0x0b05, 0x1774)},	/* Asus Gobi QDL device */
+	{DEVICE_G1K(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
+	{DEVICE_G1K(0x19d2, 0xfff2)},	/* ONDA Gobi QDL device */
+	{DEVICE_G1K(0x1557, 0x0a80)},	/* OQO Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9008)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9009)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9201)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
+
+	/* Gobi 2000 devices */
+	{USB_DEVICE(0x1410, 0xa010)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa011)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa012)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa013)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa014)},	/* Novatel Gobi 2000 QDL device */
 	{USB_DEVICE(0x413c, 0x8185)},	/* Dell Gobi 2000 QDL device (N0218, VU936) */
 	{USB_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */
 	{USB_DEVICE(0x05c6, 0x9208)},	/* Generic Gobi 2000 QDL device */
@@ -92,6 +97,8 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x05c6, 0x9204)},	/* Gobi 2000 QDL device */
 	{USB_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */
 
+	/* Gobi 3000 devices */
+	{USB_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Gobi 3000 QDL */
 	{USB_DEVICE(0x05c6, 0x920c)},	/* Gobi 3000 QDL */
 	{USB_DEVICE(0x05c6, 0x920d)},	/* Gobi 3000 Composite */
 	{USB_DEVICE(0x1410, 0xa020)},   /* Novatel Gobi 3000 QDL */
@@ -122,8 +129,10 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 	int retval = -ENODEV;
 	__u8 nintf;
 	__u8 ifnum;
+	bool is_gobi1k = id->driver_info ? true : false;
 
 	dbg("%s", __func__);
+	dbg("Is Gobi 1000 = %d", is_gobi1k);
 
 	nintf = serial->dev->actconfig->desc.bNumInterfaces;
 	dbg("Num Interfaces = %d", nintf);
@@ -169,15 +178,25 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 
 	case 3:
 	case 4:
-		/* Composite mode */
-		/* ifnum == 0 is a broadband network adapter */
-		if (ifnum == 1) {
-			/*
-			 * Diagnostics Monitor (serial line 9600 8N1)
-			 * Qualcomm DM protocol
-			 * use "libqcdm" (ModemManager) for communication
-			 */
-			dbg("Diagnostics Monitor found");
+		/* Composite mode; don't bind to the QMI/net interface as that
+		 * gets handled by other drivers.
+		 */
+
+		/* Gobi 1K USB layout:
+		 * 0: serial port (doesn't respond)
+		 * 1: serial port (doesn't respond)
+		 * 2: AT-capable modem port
+		 * 3: QMI/net
+		 *
+		 * Gobi 2K+ USB layout:
+		 * 0: QMI/net
+		 * 1: DM/DIAG (use libqcdm from ModemManager for communication)
+		 * 2: AT-capable modem port
+		 * 3: NMEA
+		 */
+
+		if (ifnum == 1 && !is_gobi1k) {
+			dbg("Gobi 2K+ DM/DIAG interface found");
 			retval = usb_set_interface(serial->dev, ifnum, 0);
 			if (retval < 0) {
 				dev_err(&serial->dev->dev,
@@ -196,13 +215,13 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 				retval = -ENODEV;
 				kfree(data);
 			}
-		} else if (ifnum==3) {
+		} else if (ifnum==3 && !is_gobi1k) {
 			/*
 			 * NMEA (serial line 9600 8N1)
 			 * # echo "\$GPS_START" > /dev/ttyUSBx
 			 * # echo "\$GPS_STOP"  > /dev/ttyUSBx
 			 */
-			dbg("NMEA GPS interface found");
+			dbg("Gobi 2K+ NMEA GPS interface found");
 			retval = usb_set_interface(serial->dev, ifnum, 0);
 			if (retval < 0) {
 				dev_err(&serial->dev->dev,
@@ -246,7 +265,6 @@ static struct usb_serial_driver qcdevice = {
 	},
 	.description         = "Qualcomm USB modem",
 	.id_table            = id_table,
-	.usb_driver          = &qcdriver,
 	.num_ports           = 1,
 	.probe               = qcprobe,
 	.open		     = usb_wwan_open,
@@ -263,31 +281,11 @@ static struct usb_serial_driver qcdevice = {
 #endif
 };
 
-static int __init qcinit(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&qcdevice);
-	if (retval)
-		return retval;
-
-	retval = usb_register(&qcdriver);
-	if (retval) {
-		usb_serial_deregister(&qcdevice);
-		return retval;
-	}
-
-	return 0;
-}
-
-static void __exit qcexit(void)
-{
-	usb_deregister(&qcdriver);
-	usb_serial_deregister(&qcdevice);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&qcdevice, NULL
+};
 
-module_init(qcinit);
-module_exit(qcexit);
+module_usb_serial_driver(qcdriver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index d074b3740dcb..ae4ee30c7411 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -156,7 +156,6 @@ static struct usb_driver safe_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
 };
 
 static const __u16 crc10_table[256] = {
@@ -309,16 +308,19 @@ static struct usb_serial_driver safe_device = {
 		.name =		"safe_serial",
 	},
 	.id_table =		id_table,
-	.usb_driver =		&safe_driver,
 	.num_ports =		1,
 	.process_read_urb =	safe_process_read_urb,
 	.prepare_write_buffer =	safe_prepare_write_buffer,
 	.attach =		safe_startup,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&safe_device, NULL
+};
+
 static int __init safe_init(void)
 {
-	int i, retval;
+	int i;
 
 	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
 	       DRIVER_DESC "\n");
@@ -337,24 +339,12 @@ static int __init safe_init(void)
 		}
 	}
 
-	retval = usb_serial_register(&safe_device);
-	if (retval)
-		goto failed_usb_serial_register;
-	retval = usb_register(&safe_driver);
-	if (retval)
-		goto failed_usb_register;
-
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&safe_device);
-failed_usb_serial_register:
-	return retval;
+	return usb_serial_register_drivers(&safe_driver, serial_drivers);
 }
 
 static void __exit safe_exit(void)
 {
-	usb_deregister(&safe_driver);
-	usb_serial_deregister(&safe_device);
+	usb_serial_deregister_drivers(&safe_driver, serial_drivers);
 }
 
 module_init(safe_init);
diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c
index 74cd4ccdb3fc..46c0430fd38b 100644
--- a/drivers/usb/serial/siemens_mpi.c
+++ b/drivers/usb/serial/siemens_mpi.c
@@ -42,37 +42,15 @@ static struct usb_serial_driver siemens_usb_mpi_device = {
 		.name =		"siemens_mpi",
 	},
 	.id_table =		id_table,
-	.usb_driver =		&siemens_usb_mpi_driver,
 	.num_ports =		1,
 };
 
-static int __init siemens_usb_mpi_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&siemens_usb_mpi_device);
-	if (retval)
-		goto failed_usb_serial_register;
-	retval = usb_register(&siemens_usb_mpi_driver);
-	if (retval)
-		goto failed_usb_register;
-	printk(KERN_INFO DRIVER_DESC "\n");
-	printk(KERN_INFO DRIVER_VERSION " " DRIVER_AUTHOR "\n");
-	return retval;
-failed_usb_register:
-	usb_serial_deregister(&siemens_usb_mpi_device);
-failed_usb_serial_register:
-	return retval;
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&siemens_usb_mpi_device, NULL
+};
 
-static void __exit siemens_usb_mpi_exit(void)
-{
-	usb_deregister(&siemens_usb_mpi_driver);
-	usb_serial_deregister(&siemens_usb_mpi_device);
-}
+module_usb_serial_driver(siemens_usb_mpi_driver, serial_drivers);
 
-module_init(siemens_usb_mpi_init);
-module_exit(siemens_usb_mpi_exit);
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index fdae0a4407cb..f14465a83dd1 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -1084,7 +1084,6 @@ static struct usb_driver sierra_driver = {
 	.resume     = usb_serial_resume,
 	.reset_resume = sierra_reset_resume,
 	.id_table   = id_table,
-	.no_dynamic_id = 	1,
 	.supports_autosuspend =	1,
 };
 
@@ -1095,7 +1094,6 @@ static struct usb_serial_driver sierra_device = {
 	},
 	.description       = "Sierra USB modem",
 	.id_table          = id_table,
-	.usb_driver        = &sierra_driver,
 	.calc_num_ports	   = sierra_calc_num_ports,
 	.probe		   = sierra_probe,
 	.open              = sierra_open,
@@ -1113,38 +1111,11 @@ static struct usb_serial_driver sierra_device = {
 	.read_int_callback = sierra_instat_callback,
 };
 
-/* Functions used by new usb-serial code. */
-static int __init sierra_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&sierra_device);
-	if (retval)
-		goto failed_device_register;
-
-
-	retval = usb_register(&sierra_driver);
-	if (retval)
-		goto failed_driver_register;
-
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-
-	return 0;
-
-failed_driver_register:
-	usb_serial_deregister(&sierra_device);
-failed_device_register:
-	return retval;
-}
-
-static void __exit sierra_exit(void)
-{
-	usb_deregister(&sierra_driver);
-	usb_serial_deregister(&sierra_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&sierra_device, NULL
+};
 
-module_init(sierra_init);
-module_exit(sierra_exit);
+module_usb_serial_driver(sierra_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index d7f5eee18f00..f06c9a8f3d37 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -156,7 +156,6 @@ static struct usb_driver spcp8x5_driver = {
 	.probe =		usb_serial_probe,
 	.disconnect =		usb_serial_disconnect,
 	.id_table =		id_table,
-	.no_dynamic_id =	1,
 };
 
 
@@ -649,7 +648,6 @@ static struct usb_serial_driver spcp8x5_device = {
 		.name =		"SPCP8x5",
 	},
 	.id_table		= id_table,
-	.usb_driver		= &spcp8x5_driver,
 	.num_ports		= 1,
 	.open 			= spcp8x5_open,
 	.dtr_rts		= spcp8x5_dtr_rts,
@@ -664,32 +662,11 @@ static struct usb_serial_driver spcp8x5_device = {
 	.process_read_urb	= spcp8x5_process_read_urb,
 };
 
-static int __init spcp8x5_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&spcp8x5_device);
-	if (retval)
-		goto failed_usb_serial_register;
-	retval = usb_register(&spcp8x5_driver);
-	if (retval)
-		goto failed_usb_register;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&spcp8x5_device);
-failed_usb_serial_register:
-	return retval;
-}
-
-static void __exit spcp8x5_exit(void)
-{
-	usb_deregister(&spcp8x5_driver);
-	usb_serial_deregister(&spcp8x5_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&spcp8x5_device, NULL
+};
 
-module_init(spcp8x5_init);
-module_exit(spcp8x5_exit);
+module_usb_serial_driver(spcp8x5_driver, serial_drivers);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 7697858d8858..3cdc8a52de44 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -70,7 +70,6 @@ static struct usb_driver ssu100_driver = {
 	.id_table		       = id_table,
 	.suspend		       = usb_serial_suspend,
 	.resume			       = usb_serial_resume,
-	.no_dynamic_id		       = 1,
 	.supports_autosuspend	       = 1,
 };
 
@@ -677,7 +676,6 @@ static struct usb_serial_driver ssu100_device = {
 	},
 	.description	     = DRIVER_DESC,
 	.id_table	     = id_table,
-	.usb_driver	     = &ssu100_driver,
 	.num_ports	     = 1,
 	.open		     = ssu100_open,
 	.close		     = ssu100_close,
@@ -693,41 +691,11 @@ static struct usb_serial_driver ssu100_device = {
 	.disconnect          = usb_serial_generic_disconnect,
 };
 
-static int __init ssu100_init(void)
-{
-	int retval;
-
-	dbg("%s", __func__);
-
-	/* register with usb-serial */
-	retval = usb_serial_register(&ssu100_device);
-
-	if (retval)
-		goto failed_usb_sio_register;
-
-	retval = usb_register(&ssu100_driver);
-	if (retval)
-		goto failed_usb_register;
-
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-
-	return 0;
-
-failed_usb_register:
-	usb_serial_deregister(&ssu100_device);
-failed_usb_sio_register:
-	return retval;
-}
-
-static void __exit ssu100_exit(void)
-{
-	usb_deregister(&ssu100_driver);
-	usb_serial_deregister(&ssu100_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ssu100_device, NULL
+};
 
-module_init(ssu100_init);
-module_exit(ssu100_exit);
+module_usb_serial_driver(ssu100_driver, serial_drivers);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 50651cf4fc61..1a5be136e6cf 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -287,7 +287,6 @@ static struct usb_driver symbol_driver = {
 	.probe =		usb_serial_probe,
 	.disconnect =		usb_serial_disconnect,
 	.id_table =		id_table,
-	.no_dynamic_id = 	1,
 };
 
 static struct usb_serial_driver symbol_device = {
@@ -296,7 +295,6 @@ static struct usb_serial_driver symbol_device = {
 		.name =		"symbol",
 	},
 	.id_table =		id_table,
-	.usb_driver = 		&symbol_driver,
 	.num_ports =		1,
 	.attach =		symbol_startup,
 	.open =			symbol_open,
@@ -307,27 +305,12 @@ static struct usb_serial_driver symbol_device = {
 	.unthrottle =		symbol_unthrottle,
 };
 
-static int __init symbol_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&symbol_device);
-	if (retval)
-		return retval;
-	retval = usb_register(&symbol_driver);
-	if (retval)
-		usb_serial_deregister(&symbol_device);
-	return retval;
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&symbol_device, NULL
+};
 
-static void __exit symbol_exit(void)
-{
-	usb_deregister(&symbol_driver);
-	usb_serial_deregister(&symbol_device);
-}
+module_usb_serial_driver(symbol_driver, serial_drivers);
 
-module_init(symbol_init);
-module_exit(symbol_exit);
 MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 75b838eff178..ab74123d658e 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -216,7 +216,6 @@ static struct usb_driver ti_usb_driver = {
 	.probe			= usb_serial_probe,
 	.disconnect		= usb_serial_disconnect,
 	.id_table		= ti_id_table_combined,
-	.no_dynamic_id = 	1,
 };
 
 static struct usb_serial_driver ti_1port_device = {
@@ -225,7 +224,6 @@ static struct usb_serial_driver ti_1port_device = {
 		.name		= "ti_usb_3410_5052_1",
 	},
 	.description		= "TI USB 3410 1 port adapter",
-	.usb_driver		= &ti_usb_driver,
 	.id_table		= ti_id_table_3410,
 	.num_ports		= 1,
 	.attach			= ti_startup,
@@ -254,7 +252,6 @@ static struct usb_serial_driver ti_2port_device = {
 		.name		= "ti_usb_3410_5052_2",
 	},
 	.description		= "TI USB 5052 2 port adapter",
-	.usb_driver		= &ti_usb_driver,
 	.id_table		= ti_id_table_5052,
 	.num_ports		= 2,
 	.attach			= ti_startup,
@@ -277,6 +274,9 @@ static struct usb_serial_driver ti_2port_device = {
 	.write_bulk_callback	= ti_bulk_out_callback,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ti_1port_device, &ti_2port_device, NULL
+};
 
 /* Module */
 
@@ -344,36 +344,17 @@ static int __init ti_init(void)
 		ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 	}
 
-	ret = usb_serial_register(&ti_1port_device);
-	if (ret)
-		goto failed_1port;
-	ret = usb_serial_register(&ti_2port_device);
-	if (ret)
-		goto failed_2port;
-
-	ret = usb_register(&ti_usb_driver);
-	if (ret)
-		goto failed_usb;
-
-	printk(KERN_INFO KBUILD_MODNAME ": " TI_DRIVER_VERSION ":"
-	       TI_DRIVER_DESC "\n");
-
-	return 0;
-
-failed_usb:
-	usb_serial_deregister(&ti_2port_device);
-failed_2port:
-	usb_serial_deregister(&ti_1port_device);
-failed_1port:
+	ret = usb_serial_register_drivers(&ti_usb_driver, serial_drivers);
+	if (ret == 0)
+		printk(KERN_INFO KBUILD_MODNAME ": " TI_DRIVER_VERSION ":"
+			       TI_DRIVER_DESC "\n");
 	return ret;
 }
 
 
 static void __exit ti_exit(void)
 {
-	usb_deregister(&ti_usb_driver);
-	usb_serial_deregister(&ti_1port_device);
-	usb_serial_deregister(&ti_2port_device);
+	usb_serial_deregister_drivers(&ti_usb_driver, serial_drivers);
 }
 
 
@@ -1250,7 +1231,6 @@ static void ti_bulk_out_callback(struct urb *urb)
 {
 	struct ti_port *tport = urb->context;
 	struct usb_serial_port *port = tport->tp_port;
-	struct device *dev = &urb->dev->dev;
 	int status = urb->status;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -1268,7 +1248,7 @@ static void ti_bulk_out_callback(struct urb *urb)
 		wake_up_interruptible(&tport->tp_write_wait);
 		return;
 	default:
-		dev_err(dev, "%s - nonzero urb status, %d\n",
+		dev_err_console(port, "%s - nonzero urb status, %d\n",
 			__func__, status);
 		tport->tp_tdev->td_urb_error = 1;
 		wake_up_interruptible(&tport->tp_write_wait);
@@ -1337,7 +1317,7 @@ static void ti_send(struct ti_port *tport)
 
 	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 	if (result) {
-		dev_err(&port->dev, "%s - submit write urb failed, %d\n",
+		dev_err_console(port, "%s - submit write urb failed, %d\n",
 							__func__, result);
 		tport->tp_write_urb_in_use = 0;
 		/* TODO: reschedule ti_send */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index d4e724d9b1f4..69230f01056a 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1333,7 +1333,7 @@ static void fixup_generic(struct usb_serial_driver *device)
 	set_to_generic_if_null(device, prepare_write_buffer);
 }
 
-int usb_serial_register(struct usb_serial_driver *driver)
+static int usb_serial_register(struct usb_serial_driver *driver)
 {
 	int retval;
 
@@ -1367,10 +1367,8 @@ int usb_serial_register(struct usb_serial_driver *driver)
 	mutex_unlock(&table_lock);
 	return retval;
 }
-EXPORT_SYMBOL_GPL(usb_serial_register);
 
-
-void usb_serial_deregister(struct usb_serial_driver *device)
+static void usb_serial_deregister(struct usb_serial_driver *device)
 {
 	printk(KERN_INFO "USB Serial deregistering driver %s\n",
 	       device->description);
@@ -1379,7 +1377,76 @@ void usb_serial_deregister(struct usb_serial_driver *device)
 	usb_serial_bus_deregister(device);
 	mutex_unlock(&table_lock);
 }
-EXPORT_SYMBOL_GPL(usb_serial_deregister);
+
+/**
+ * usb_serial_register_drivers - register drivers for a usb-serial module
+ * @udriver: usb_driver used for matching devices/interfaces
+ * @serial_drivers: NULL-terminated array of pointers to drivers to be registered
+ *
+ * Registers @udriver and all the drivers in the @serial_drivers array.
+ * Automatically fills in the .no_dynamic_id field in @udriver and
+ * the .usb_driver field in each serial driver.
+ */
+int usb_serial_register_drivers(struct usb_driver *udriver,
+		struct usb_serial_driver * const serial_drivers[])
+{
+	int rc;
+	const struct usb_device_id *saved_id_table;
+	struct usb_serial_driver * const *sd;
+
+	/*
+	 * udriver must be registered before any of the serial drivers,
+	 * because the store_new_id() routine for the serial drivers (in
+	 * bus.c) probes udriver.
+	 *
+	 * Performance hack: We don't want udriver to be probed until
+	 * the serial drivers are registered, because the probe would
+	 * simply fail for lack of a matching serial driver.
+	 * Therefore save off udriver's id_table until we are all set.
+	 */
+	saved_id_table = udriver->id_table;
+	udriver->id_table = NULL;
+
+	udriver->no_dynamic_id = 1;
+	rc = usb_register(udriver);
+	if (rc)
+		return rc;
+
+	for (sd = serial_drivers; *sd; ++sd) {
+		(*sd)->usb_driver = udriver;
+		rc = usb_serial_register(*sd);
+		if (rc)
+			goto failed;
+	}
+
+	/* Now restore udriver's id_table and look for matches */
+	udriver->id_table = saved_id_table;
+	rc = driver_attach(&udriver->drvwrap.driver);
+	return 0;
+
+ failed:
+	while (sd-- > serial_drivers)
+		usb_serial_deregister(*sd);
+	usb_deregister(udriver);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(usb_serial_register_drivers);
+
+/**
+ * usb_serial_deregister_drivers - deregister drivers for a usb-serial module
+ * @udriver: usb_driver to unregister
+ * @serial_drivers: NULL-terminated array of pointers to drivers to be deregistered
+ *
+ * Deregisters @udriver and all the drivers in the @serial_drivers array.
+ */
+void usb_serial_deregister_drivers(struct usb_driver *udriver,
+		struct usb_serial_driver * const serial_drivers[])
+{
+	for (; *serial_drivers; ++serial_drivers)
+		usb_serial_deregister(*serial_drivers);
+	usb_deregister(udriver);
+}
+EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers);
 
 /* Module information */
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 9b632e753210..e3e8995a4739 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -40,7 +40,6 @@ static struct usb_driver debug_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id =	1,
 };
 
 /* This HW really does not support a serial break, so one will be
@@ -74,32 +73,15 @@ static struct usb_serial_driver debug_device = {
 		.name =		"debug",
 	},
 	.id_table =		id_table,
-	.usb_driver =		&debug_driver,
 	.num_ports =		1,
 	.bulk_out_size =	USB_DEBUG_MAX_PACKET_SIZE,
 	.break_ctl =		usb_debug_break_ctl,
 	.process_read_urb =	usb_debug_process_read_urb,
 };
 
-static int __init debug_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&debug_device);
-	if (retval)
-		return retval;
-	retval = usb_register(&debug_driver);
-	if (retval)
-		usb_serial_deregister(&debug_device);
-	return retval;
-}
-
-static void __exit debug_exit(void)
-{
-	usb_deregister(&debug_driver);
-	usb_serial_deregister(&debug_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&debug_device, NULL
+};
 
-module_init(debug_init);
-module_exit(debug_exit);
+module_usb_serial_driver(debug_driver, serial_drivers);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 210e4b10dc11..71d696474f24 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -173,7 +173,6 @@ static struct usb_driver visor_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table_combined,
-	.no_dynamic_id = 	1,
 };
 
 /* All of the device info needed for the Handspring Visor,
@@ -184,7 +183,6 @@ static struct usb_serial_driver handspring_device = {
 		.name =		"visor",
 	},
 	.description =		"Handspring Visor / Palm OS",
-	.usb_driver =		&visor_driver,
 	.id_table =		id_table,
 	.num_ports =		2,
 	.bulk_out_size =	256,
@@ -205,7 +203,6 @@ static struct usb_serial_driver clie_5_device = {
 		.name =		"clie_5",
 	},
 	.description =		"Sony Clie 5.0",
-	.usb_driver =		&visor_driver,
 	.id_table =		clie_id_5_table,
 	.num_ports =		2,
 	.bulk_out_size =	256,
@@ -226,7 +223,6 @@ static struct usb_serial_driver clie_3_5_device = {
 		.name =		"clie_3.5",
 	},
 	.description =		"Sony Clie 3.5",
-	.usb_driver =		&visor_driver,
 	.id_table =		clie_id_3_5_table,
 	.num_ports =		1,
 	.bulk_out_size =	256,
@@ -237,6 +233,10 @@ static struct usb_serial_driver clie_3_5_device = {
 	.attach =		clie_3_5_startup,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&handspring_device, &clie_5_device, &clie_3_5_device, NULL
+};
+
 /******************************************************************************
  * Handspring Visor specific driver functions
  ******************************************************************************/
@@ -685,38 +685,17 @@ static int __init visor_init(void)
 		       ": Adding Palm OS protocol 4.x support for unknown device: 0x%x/0x%x\n",
 			vendor, product);
 	}
-	retval = usb_serial_register(&handspring_device);
-	if (retval)
-		goto failed_handspring_register;
-	retval = usb_serial_register(&clie_3_5_device);
-	if (retval)
-		goto failed_clie_3_5_register;
-	retval = usb_serial_register(&clie_5_device);
-	if (retval)
-		goto failed_clie_5_register;
-	retval = usb_register(&visor_driver);
-	if (retval)
-		goto failed_usb_register;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
 
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&clie_5_device);
-failed_clie_5_register:
-	usb_serial_deregister(&clie_3_5_device);
-failed_clie_3_5_register:
-	usb_serial_deregister(&handspring_device);
-failed_handspring_register:
+	retval = usb_serial_register_drivers(&visor_driver, serial_drivers);
+	if (retval == 0)
+		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
 	return retval;
 }
 
 
 static void __exit visor_exit (void)
 {
-	usb_deregister(&visor_driver);
-	usb_serial_deregister(&handspring_device);
-	usb_serial_deregister(&clie_3_5_device);
-	usb_serial_deregister(&clie_5_device);
+	usb_serial_deregister_drivers(&visor_driver, serial_drivers);
 }
 
 
diff --git a/drivers/usb/serial/vivopay-serial.c b/drivers/usb/serial/vivopay-serial.c
index f719d00972fc..078f338b5feb 100644
--- a/drivers/usb/serial/vivopay-serial.c
+++ b/drivers/usb/serial/vivopay-serial.c
@@ -30,7 +30,6 @@ static struct usb_driver vivopay_serial_driver = {
 	.probe =		usb_serial_probe,
 	.disconnect =		usb_serial_disconnect,
 	.id_table =		id_table,
-	.no_dynamic_id =	1,
 };
 
 static struct usb_serial_driver vivopay_serial_device = {
@@ -39,36 +38,14 @@ static struct usb_serial_driver vivopay_serial_device = {
 		.name =		"vivopay-serial",
 	},
 	.id_table =		id_table,
-	.usb_driver =		&vivopay_serial_driver,
 	.num_ports =		1,
 };
 
-static int __init vivopay_serial_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&vivopay_serial_device);
-	if (retval)
-		goto failed_usb_serial_register;
-	retval = usb_register(&vivopay_serial_driver);
-	if (retval)
-		goto failed_usb_register;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	    DRIVER_DESC "\n");
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&vivopay_serial_device);
-failed_usb_serial_register:
-	return retval;
-}
-
-static void __exit vivopay_serial_exit(void)
-{
-	usb_deregister(&vivopay_serial_driver);
-	usb_serial_deregister(&vivopay_serial_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&vivopay_serial_device, NULL
+};
 
-module_init(vivopay_serial_init);
-module_exit(vivopay_serial_exit);
+module_usb_serial_driver(vivopay_serial_driver, serial_drivers);
 
 MODULE_AUTHOR("Forest Bond <forest.bond@outpostembedded.com>");
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 7e0acf5c8e38..407e23c87946 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -83,7 +83,6 @@ static struct usb_driver whiteheat_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table_combined,
-	.no_dynamic_id = 	1,
 };
 
 /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
@@ -121,7 +120,6 @@ static struct usb_serial_driver whiteheat_fake_device = {
 		.name =		"whiteheatnofirm",
 	},
 	.description =		"Connect Tech - WhiteHEAT - (prerenumeration)",
-	.usb_driver =		&whiteheat_driver,
 	.id_table =		id_table_prerenumeration,
 	.num_ports =		1,
 	.probe =		whiteheat_firmware_download,
@@ -134,7 +132,6 @@ static struct usb_serial_driver whiteheat_device = {
 		.name =		"whiteheat",
 	},
 	.description =		"Connect Tech - WhiteHEAT",
-	.usb_driver =		&whiteheat_driver,
 	.id_table =		id_table_std,
 	.num_ports =		4,
 	.attach =		whiteheat_attach,
@@ -155,6 +152,9 @@ static struct usb_serial_driver whiteheat_device = {
 	.write_bulk_callback =	whiteheat_write_callback,
 };
 
+static struct usb_serial_driver * const serial_drivers[] = {
+	&whiteheat_fake_device, &whiteheat_device, NULL
+};
 
 struct whiteheat_command_private {
 	struct mutex		mutex;
@@ -740,7 +740,7 @@ static int whiteheat_write(struct tty_struct *tty,
 		urb->transfer_buffer_length = bytes;
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result) {
-			dev_err(&port->dev,
+			dev_err_console(port,
 				"%s - failed submitting write urb, error %d\n",
 				__func__, result);
 			sent = result;
@@ -1454,44 +1454,7 @@ out:
 	tty_kref_put(tty);
 }
 
-
-/*****************************************************************************
- * Connect Tech's White Heat module functions
- *****************************************************************************/
-static int __init whiteheat_init(void)
-{
-	int retval;
-	retval = usb_serial_register(&whiteheat_fake_device);
-	if (retval)
-		goto failed_fake_register;
-	retval = usb_serial_register(&whiteheat_device);
-	if (retval)
-		goto failed_device_register;
-	retval = usb_register(&whiteheat_driver);
-	if (retval)
-		goto failed_usb_register;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	return 0;
-failed_usb_register:
-	usb_serial_deregister(&whiteheat_device);
-failed_device_register:
-	usb_serial_deregister(&whiteheat_fake_device);
-failed_fake_register:
-	return retval;
-}
-
-
-static void __exit whiteheat_exit(void)
-{
-	usb_deregister(&whiteheat_driver);
-	usb_serial_deregister(&whiteheat_fake_device);
-	usb_serial_deregister(&whiteheat_device);
-}
-
-
-module_init(whiteheat_init);
-module_exit(whiteheat_exit);
+module_usb_serial_driver(whiteheat_driver, serial_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/zio.c b/drivers/usb/serial/zio.c
index f57967278833..9d0bb3752cd4 100644
--- a/drivers/usb/serial/zio.c
+++ b/drivers/usb/serial/zio.c
@@ -27,7 +27,6 @@ static struct usb_driver zio_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id =	1,
 };
 
 static struct usb_serial_driver zio_device = {
@@ -36,29 +35,12 @@ static struct usb_serial_driver zio_device = {
 		.name =		"zio",
 	},
 	.id_table =		id_table,
-	.usb_driver =		&zio_driver,
 	.num_ports =		1,
 };
 
-static int __init zio_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&zio_device);
-	if (retval)
-		return retval;
-	retval = usb_register(&zio_driver);
-	if (retval)
-		usb_serial_deregister(&zio_device);
-	return retval;
-}
-
-static void __exit zio_exit(void)
-{
-	usb_deregister(&zio_driver);
-	usb_serial_deregister(&zio_device);
-}
+static struct usb_serial_driver * const serial_drivers[] = {
+	&zio_device, NULL
+};
 
-module_init(zio_init);
-module_exit(zio_exit);
+module_usb_serial_driver(zio_driver, serial_drivers);
 MODULE_LICENSE("GPL");