Merge tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.6-rc1.

  The normal mess is here, gadget and xhci fixes and updates, and lots
  of other driver updates and cleanups as well.  Full details are in the
  shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (266 commits)
  USB: core: let USB device know device node
  usb: devio: Add ioctl to disallow detaching kernel USB drivers.
  usb: gadget: f_acm: Fix configfs attr name
  usb: udc: lpc32xx: remove USB PLL and USB OTG clock management
  usb: udc: lpc32xx: remove direct access to clock controller registers
  usb: udc: lpc32xx: switch to clock prepare/unprepare model
  usb: renesas_usbhs: gadget: fix giveback status code in usbhsg_pipe_disable()
  usb: gadget: renesas_usb3: Use ARCH_RENESAS
  usb: dwc2: Fix issues in dwc2_complete_non_isoc_xfer_ddma()
  usb: dwc2: Add support for Lantiq ARX and XRX SoCs
  usb: phy: generic: Handle late registration of gadget
  usb: gadget: bdc_udc: fix race condition in bdc_udc_exit()
  usb: musb: core: added missing const qualifier to musb_hdrc_platform_data::config
  usb: dwc2: Move host-specific core functions into hcd.c
  usb: dwc2: Move register save and restore functions
  usb: dwc2: Use kmem_cache_free()
  usb: dwc2: host: If using uframe scheduler, end splits better
  usb: dwc2: host: Totally redo the microframe scheduler
  usb: dwc2: host: Properly set even/odd frame
  usb: dwc2: host: Add dwc2_hcd_get_future_frame_number() call
  ...

12 files changed, 228 insertions, 178 deletions

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index c73808f095bb..f139488d0816 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -370,7 +370,7 @@ static void ch341_set_termios(struct tty_struct *tty,
 static void ch341_break_ctl(struct tty_struct *tty, int break_state)
 {
 	const uint16_t ch341_break_reg =
-		CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8);
+			((uint16_t) CH341_REG_BREAK2 << 8) | CH341_REG_BREAK1;
 	struct usb_serial_port *port = tty->driver_data;
 	int r;
 	uint16_t reg_contents;
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 73a366de5102..fbfe761c7fba 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -327,113 +327,169 @@ struct cp210x_comm_status {
 #define PURGE_ALL		0x000f
 
 /*
- * cp210x_get_config
- * Reads from the CP210x configuration registers
- * 'size' is specified in bytes.
- * 'data' is a pointer to a pre-allocated array of integers large
- * enough to hold 'size' bytes (with 4 bytes to each integer)
+ * Reads a variable-sized block of CP210X_ registers, identified by req.
+ * Returns data into buf in native USB byte order.
  */
-static int cp210x_get_config(struct usb_serial_port *port, u8 request,
-		unsigned int *data, int size)
+static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
+		void *buf, int bufsize)
 {
 	struct usb_serial *serial = port->serial;
 	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
-	__le32 *buf;
-	int result, i, length;
-
-	/* Number of integers required to contain the array */
-	length = (((size - 1) | 3) + 1) / 4;
+	void *dmabuf;
+	int result;
 
-	buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
-	if (!buf)
+	dmabuf = kmalloc(bufsize, GFP_KERNEL);
+	if (!dmabuf) {
+		/*
+		 * FIXME Some callers don't bother to check for error,
+		 * at least give them consistent junk until they are fixed
+		 */
+		memset(buf, 0, bufsize);
 		return -ENOMEM;
+	}
 
-	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-				request, REQTYPE_INTERFACE_TO_HOST, 0x0000,
-				port_priv->bInterfaceNumber, buf, size,
-				USB_CTRL_GET_TIMEOUT);
+			req, REQTYPE_INTERFACE_TO_HOST, 0,
+			port_priv->bInterfaceNumber, dmabuf, bufsize,
+			USB_CTRL_SET_TIMEOUT);
+	if (result == bufsize) {
+		memcpy(buf, dmabuf, bufsize);
+		result = 0;
+	} else {
+		dev_err(&port->dev, "failed get req 0x%x size %d status: %d\n",
+				req, bufsize, result);
+		if (result >= 0)
+			result = -EPROTO;
 
-	/* Convert data into an array of integers */
-	for (i = 0; i < length; i++)
-		data[i] = le32_to_cpu(buf[i]);
+		/*
+		 * FIXME Some callers don't bother to check for error,
+		 * at least give them consistent junk until they are fixed
+		 */
+		memset(buf, 0, bufsize);
+	}
 
-	kfree(buf);
+	kfree(dmabuf);
 
-	if (result != size) {
-		dev_dbg(&port->dev, "%s - Unable to send config request, request=0x%x size=%d result=%d\n",
-			__func__, request, size, result);
-		if (result > 0)
-			result = -EPROTO;
+	return result;
+}
 
-		return result;
+/*
+ * Reads any 32-bit CP210X_ register identified by req.
+ */
+static int cp210x_read_u32_reg(struct usb_serial_port *port, u8 req, u32 *val)
+{
+	__le32 le32_val;
+	int err;
+
+	err = cp210x_read_reg_block(port, req, &le32_val, sizeof(le32_val));
+	if (err) {
+		/*
+		 * FIXME Some callers don't bother to check for error,
+		 * at least give them consistent junk until they are fixed
+		 */
+		*val = 0;
+		return err;
 	}
 
+	*val = le32_to_cpu(le32_val);
+
+	return 0;
+}
+
+/*
+ * Reads any 16-bit CP210X_ register identified by req.
+ */
+static int cp210x_read_u16_reg(struct usb_serial_port *port, u8 req, u16 *val)
+{
+	__le16 le16_val;
+	int err;
+
+	err = cp210x_read_reg_block(port, req, &le16_val, sizeof(le16_val));
+	if (err)
+		return err;
+
+	*val = le16_to_cpu(le16_val);
+
 	return 0;
 }
 
 /*
- * cp210x_set_config
- * Writes to the CP210x configuration registers
- * Values less than 16 bits wide are sent directly
- * 'size' is specified in bytes.
+ * Reads any 8-bit CP210X_ register identified by req.
+ */
+static int cp210x_read_u8_reg(struct usb_serial_port *port, u8 req, u8 *val)
+{
+	return cp210x_read_reg_block(port, req, val, sizeof(*val));
+}
+
+/*
+ * Writes any 16-bit CP210X_ register (req) whose value is passed
+ * entirely in the wValue field of the USB request.
  */
-static int cp210x_set_config(struct usb_serial_port *port, u8 request,
-		unsigned int *data, int size)
+static int cp210x_write_u16_reg(struct usb_serial_port *port, u8 req, u16 val)
 {
 	struct usb_serial *serial = port->serial;
 	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
-	__le32 *buf;
-	int result, i, length;
+	int result;
+
+	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			req, REQTYPE_HOST_TO_INTERFACE, val,
+			port_priv->bInterfaceNumber, NULL, 0,
+			USB_CTRL_SET_TIMEOUT);
+	if (result < 0) {
+		dev_err(&port->dev, "failed set request 0x%x status: %d\n",
+				req, result);
+	}
+
+	return result;
+}
 
-	/* Number of integers required to contain the array */
-	length = (((size - 1) | 3) + 1) / 4;
+/*
+ * Writes a variable-sized block of CP210X_ registers, identified by req.
+ * Data in buf must be in native USB byte order.
+ */
+static int cp210x_write_reg_block(struct usb_serial_port *port, u8 req,
+		void *buf, int bufsize)
+{
+	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	void *dmabuf;
+	int result;
 
-	buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
-	if (!buf)
+	dmabuf = kmalloc(bufsize, GFP_KERNEL);
+	if (!dmabuf)
 		return -ENOMEM;
 
-	/* Array of integers into bytes */
-	for (i = 0; i < length; i++)
-		buf[i] = cpu_to_le32(data[i]);
+	memcpy(dmabuf, buf, bufsize);
 
-	if (size > 2) {
-		result = usb_control_msg(serial->dev,
-				usb_sndctrlpipe(serial->dev, 0),
-				request, REQTYPE_HOST_TO_INTERFACE, 0x0000,
-				port_priv->bInterfaceNumber, buf, size,
-				USB_CTRL_SET_TIMEOUT);
-	} else {
-		result = usb_control_msg(serial->dev,
-				usb_sndctrlpipe(serial->dev, 0),
-				request, REQTYPE_HOST_TO_INTERFACE, data[0],
-				port_priv->bInterfaceNumber, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
-	}
+	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			req, REQTYPE_HOST_TO_INTERFACE, 0,
+			port_priv->bInterfaceNumber, dmabuf, bufsize,
+			USB_CTRL_SET_TIMEOUT);
 
-	kfree(buf);
+	kfree(dmabuf);
 
-	if ((size > 2 && result != size) || result < 0) {
-		dev_dbg(&port->dev, "%s - Unable to send request, request=0x%x size=%d result=%d\n",
-			__func__, request, size, result);
-		if (result > 0)
+	if (result == bufsize) {
+		result = 0;
+	} else {
+		dev_err(&port->dev, "failed set req 0x%x size %d status: %d\n",
+				req, bufsize, result);
+		if (result >= 0)
 			result = -EPROTO;
-
-		return result;
 	}
 
-	return 0;
+	return result;
 }
 
 /*
- * cp210x_set_config_single
- * Convenience function for calling cp210x_set_config on single data values
- * without requiring an integer pointer
+ * Writes any 32-bit CP210X_ register identified by req.
  */
-static inline int cp210x_set_config_single(struct usb_serial_port *port,
-		u8 request, unsigned int data)
+static int cp210x_write_u32_reg(struct usb_serial_port *port, u8 req, u32 val)
 {
-	return cp210x_set_config(port, request, &data, 2);
+	__le32 le32_val;
+
+	le32_val = cpu_to_le32(val);
+
+	return cp210x_write_reg_block(port, req, &le32_val, sizeof(le32_val));
 }
 
 /*
@@ -445,47 +501,46 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port,
 static int cp210x_detect_swapped_line_ctl(struct usb_serial_port *port)
 {
 	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
-	unsigned int line_ctl_save;
-	unsigned int line_ctl_test;
+	u16 line_ctl_save;
+	u16 line_ctl_test;
 	int err;
 
-	err = cp210x_get_config(port, CP210X_GET_LINE_CTL, &line_ctl_save, 2);
+	err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_save);
 	if (err)
 		return err;
 
-	line_ctl_test = 0x800;
-	err = cp210x_set_config(port, CP210X_SET_LINE_CTL, &line_ctl_test, 2);
+	err = cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, 0x800);
 	if (err)
 		return err;
 
-	err = cp210x_get_config(port, CP210X_GET_LINE_CTL, &line_ctl_test, 2);
+	err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_test);
 	if (err)
 		return err;
 
 	if (line_ctl_test == 8) {
 		port_priv->has_swapped_line_ctl = true;
-		line_ctl_save = swab16((u16)line_ctl_save);
+		line_ctl_save = swab16(line_ctl_save);
 	}
 
-	return cp210x_set_config(port, CP210X_SET_LINE_CTL, &line_ctl_save, 2);
+	return cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, line_ctl_save);
 }
 
 /*
- * Must always be called instead of cp210x_get_config(CP210X_GET_LINE_CTL)
+ * Must always be called instead of cp210x_read_u16_reg(CP210X_GET_LINE_CTL)
  * to workaround cp2108 bug and get correct value.
  */
-static int cp210x_get_line_ctl(struct usb_serial_port *port, unsigned int *ctl)
+static int cp210x_get_line_ctl(struct usb_serial_port *port, u16 *ctl)
 {
 	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 	int err;
 
-	err = cp210x_get_config(port, CP210X_GET_LINE_CTL, ctl, 2);
+	err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, ctl);
 	if (err)
 		return err;
 
 	/* Workaround swapped bytes in 16-bit value from CP210X_GET_LINE_CTL */
 	if (port_priv->has_swapped_line_ctl)
-		*ctl = swab16((u16)(*ctl));
+		*ctl = swab16(*ctl);
 
 	return 0;
 }
@@ -536,8 +591,7 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int result;
 
-	result = cp210x_set_config_single(port, CP210X_IFC_ENABLE,
-								UART_ENABLE);
+	result = cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_ENABLE);
 	if (result) {
 		dev_err(&port->dev, "%s - Unable to enable UART\n", __func__);
 		return result;
@@ -555,15 +609,12 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 static void cp210x_close(struct usb_serial_port *port)
 {
-	unsigned int purge_ctl;
-
 	usb_serial_generic_close(port);
 
 	/* Clear both queues; cp2108 needs this to avoid an occasional hang */
-	purge_ctl = PURGE_ALL;
-	cp210x_set_config(port, CP210X_PURGE, &purge_ctl, 2);
+	cp210x_write_u16_reg(port, CP210X_PURGE, PURGE_ALL);
 
-	cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
+	cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE);
 }
 
 /*
@@ -641,11 +692,12 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 	unsigned int *cflagp, unsigned int *baudp)
 {
 	struct device *dev = &port->dev;
-	unsigned int cflag, modem_ctl[4];
-	unsigned int baud;
-	unsigned int bits;
+	unsigned int cflag;
+	u8 modem_ctl[16];
+	u32 baud;
+	u16 bits;
 
-	cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
+	cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);
 
 	dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
 	*baudp = baud;
@@ -676,14 +728,14 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 		cflag |= CS8;
 		bits &= ~BITS_DATA_MASK;
 		bits |= BITS_DATA_8;
-		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+		cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
 		break;
 	default:
 		dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__);
 		cflag |= CS8;
 		bits &= ~BITS_DATA_MASK;
 		bits |= BITS_DATA_8;
-		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+		cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
 		break;
 	}
 
@@ -714,7 +766,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 		dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__);
 		cflag &= ~PARENB;
 		bits &= ~BITS_PARITY_MASK;
-		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+		cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
 		break;
 	}
 
@@ -726,7 +778,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 	case BITS_STOP_1_5:
 		dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__);
 		bits &= ~BITS_STOP_MASK;
-		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+		cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
 		break;
 	case BITS_STOP_2:
 		dev_dbg(dev, "%s - stop bits = 2\n", __func__);
@@ -735,12 +787,13 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 	default:
 		dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__);
 		bits &= ~BITS_STOP_MASK;
-		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+		cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
 		break;
 	}
 
-	cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
-	if (modem_ctl[0] & 0x0008) {
+	cp210x_read_reg_block(port, CP210X_GET_FLOW, modem_ctl,
+			sizeof(modem_ctl));
+	if (modem_ctl[0] & 0x08) {
 		dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
 		cflag |= CRTSCTS;
 	} else {
@@ -792,8 +845,7 @@ static void cp210x_change_speed(struct tty_struct *tty,
 	baud = cp210x_quantise_baudrate(baud);
 
 	dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
-	if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
-							sizeof(baud))) {
+	if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) {
 		dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
 		if (old_termios)
 			baud = old_termios->c_ospeed;
@@ -809,8 +861,8 @@ static void cp210x_set_termios(struct tty_struct *tty,
 {
 	struct device *dev = &port->dev;
 	unsigned int cflag, old_cflag;
-	unsigned int bits;
-	unsigned int modem_ctl[4];
+	u16 bits;
+	u8 modem_ctl[16];
 
 	cflag = tty->termios.c_cflag;
 	old_cflag = old_termios->c_cflag;
@@ -848,7 +900,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
 			bits |= BITS_DATA_8;
 			break;
 		}
-		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+		if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
 			dev_dbg(dev, "Number of data bits requested not supported by device\n");
 	}
 
@@ -875,7 +927,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
 				}
 			}
 		}
-		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+		if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
 			dev_dbg(dev, "Parity mode not supported by device\n");
 	}
 
@@ -889,32 +941,40 @@ static void cp210x_set_termios(struct tty_struct *tty,
 			bits |= BITS_STOP_1;
 			dev_dbg(dev, "%s - stop bits = 1\n", __func__);
 		}
-		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+		if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
 			dev_dbg(dev, "Number of stop bits requested not supported by device\n");
 	}
 
 	if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
-		cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
-		dev_dbg(dev, "%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n",
-			__func__, modem_ctl[0], modem_ctl[1],
-			modem_ctl[2], modem_ctl[3]);
+
+		/* Only bytes 0, 4 and 7 out of first 8 have functional bits */
+
+		cp210x_read_reg_block(port, CP210X_GET_FLOW, modem_ctl,
+				sizeof(modem_ctl));
+		dev_dbg(dev, "%s - read modem controls = %02x .. .. .. %02x .. .. %02x\n",
+			__func__, modem_ctl[0], modem_ctl[4], modem_ctl[7]);
 
 		if (cflag & CRTSCTS) {
 			modem_ctl[0] &= ~0x7B;
 			modem_ctl[0] |= 0x09;
-			modem_ctl[1] = 0x80;
+			modem_ctl[4] = 0x80;
+			/* FIXME - why clear reserved bits just read? */
+			modem_ctl[5] = 0;
+			modem_ctl[6] = 0;
+			modem_ctl[7] = 0;
 			dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
 		} else {
 			modem_ctl[0] &= ~0x7B;
 			modem_ctl[0] |= 0x01;
-			modem_ctl[1] |= 0x40;
+			/* FIXME - OR here instead of assignment looks wrong */
+			modem_ctl[4] |= 0x40;
 			dev_dbg(dev, "%s - flow control = NONE\n", __func__);
 		}
 
-		dev_dbg(dev, "%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n",
-			__func__, modem_ctl[0], modem_ctl[1],
-			modem_ctl[2], modem_ctl[3]);
-		cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16);
+		dev_dbg(dev, "%s - write modem controls = %02x .. .. .. %02x .. .. %02x\n",
+			__func__, modem_ctl[0], modem_ctl[4], modem_ctl[7]);
+		cp210x_write_reg_block(port, CP210X_SET_FLOW, modem_ctl,
+				sizeof(modem_ctl));
 	}
 
 }
@@ -929,7 +989,7 @@ static int cp210x_tiocmset(struct tty_struct *tty,
 static int cp210x_tiocmset_port(struct usb_serial_port *port,
 		unsigned int set, unsigned int clear)
 {
-	unsigned int control = 0;
+	u16 control = 0;
 
 	if (set & TIOCM_RTS) {
 		control |= CONTROL_RTS;
@@ -950,7 +1010,7 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
 
 	dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control);
 
-	return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
+	return cp210x_write_u16_reg(port, CP210X_SET_MHS, control);
 }
 
 static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
@@ -964,10 +1024,10 @@ static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
 static int cp210x_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	unsigned int control;
+	u8 control;
 	int result;
 
-	cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
+	cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
 
 	result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
 		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
@@ -984,7 +1044,7 @@ static int cp210x_tiocmget(struct tty_struct *tty)
 static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	unsigned int state;
+	u16 state;
 
 	if (break_state == 0)
 		state = BREAK_OFF;
@@ -992,7 +1052,7 @@ static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
 		state = BREAK_ON;
 	dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
 		state == BREAK_OFF ? "off" : "on");
-	cp210x_set_config(port, CP210X_SET_BREAK, &state, 2);
+	cp210x_write_u16_reg(port, CP210X_SET_BREAK, state);
 }
 
 static int cp210x_port_probe(struct usb_serial_port *port)
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 2916dea3ede8..5f17a3b9916d 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -140,7 +140,6 @@ static int  cyberjack_open(struct tty_struct *tty,
 {
 	struct cyberjack_private *priv;
 	unsigned long flags;
-	int result = 0;
 
 	dev_dbg(&port->dev, "%s - usb_clear_halt\n", __func__);
 	usb_clear_halt(port->serial->dev, port->write_urb->pipe);
@@ -152,7 +151,7 @@ static int  cyberjack_open(struct tty_struct *tty,
 	priv->wrsent = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return result;
+	return 0;
 }
 
 static void cyberjack_close(struct usb_serial_port *port)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8c660ae401d8..427ae43ee898 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1320,11 +1320,11 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
 		if (baud <= 3000000) {
 			__u16 product_id = le16_to_cpu(
 				port->serial->dev->descriptor.idProduct);
-			if (((FTDI_NDI_HUC_PID == product_id) ||
-			     (FTDI_NDI_SPECTRA_SCU_PID == product_id) ||
-			     (FTDI_NDI_FUTURE_2_PID == product_id) ||
-			     (FTDI_NDI_FUTURE_3_PID == product_id) ||
-			     (FTDI_NDI_AURORA_SCU_PID == product_id)) &&
+			if (((product_id == FTDI_NDI_HUC_PID)		||
+			     (product_id == FTDI_NDI_SPECTRA_SCU_PID)	||
+			     (product_id == FTDI_NDI_FUTURE_2_PID)	||
+			     (product_id == FTDI_NDI_FUTURE_3_PID)	||
+			     (product_id == FTDI_NDI_AURORA_SCU_PID))	&&
 			    (baud == 19200)) {
 				baud = 1200000;
 			}
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index ed58c6fa8dbe..bbcc13df11ac 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -239,11 +239,11 @@ enum ftdi_sio_baudrate {
  */
 
 #define FTDI_SIO_SET_DTR_MASK 0x1
-#define FTDI_SIO_SET_DTR_HIGH (1 | (FTDI_SIO_SET_DTR_MASK  << 8))
-#define FTDI_SIO_SET_DTR_LOW  (0 | (FTDI_SIO_SET_DTR_MASK  << 8))
+#define FTDI_SIO_SET_DTR_HIGH ((FTDI_SIO_SET_DTR_MASK  << 8) | 1)
+#define FTDI_SIO_SET_DTR_LOW  ((FTDI_SIO_SET_DTR_MASK  << 8) | 0)
 #define FTDI_SIO_SET_RTS_MASK 0x2
-#define FTDI_SIO_SET_RTS_HIGH (2 | (FTDI_SIO_SET_RTS_MASK << 8))
-#define FTDI_SIO_SET_RTS_LOW (0 | (FTDI_SIO_SET_RTS_MASK << 8))
+#define FTDI_SIO_SET_RTS_HIGH ((FTDI_SIO_SET_RTS_MASK << 8) | 2)
+#define FTDI_SIO_SET_RTS_LOW  ((FTDI_SIO_SET_RTS_MASK << 8) | 0)
 
 /*
  * ControlValue
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index db591d19d416..97cabf803c2f 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -237,10 +237,10 @@ static inline int getDataLength(const __u8 *usbPacket)
  */
 static inline int isAbortTrfCmnd(const unsigned char *buf)
 {
-	if (0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ,
-					sizeof(GARMIN_STOP_TRANSFER_REQ)) ||
-	    0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2,
-					sizeof(GARMIN_STOP_TRANSFER_REQ_V2)))
+	if (memcmp(buf, GARMIN_STOP_TRANSFER_REQ,
+			sizeof(GARMIN_STOP_TRANSFER_REQ)) == 0 ||
+	    memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2,
+			sizeof(GARMIN_STOP_TRANSFER_REQ_V2)) == 0)
 		return 1;
 	else
 		return 0;
@@ -350,7 +350,7 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id)
 	unsigned  l = 0;
 
 	dev_dbg(&garmin_data_p->port->dev, "%s - pkt-id: 0x%X.\n", __func__,
-		0xFF & pkt_id);
+			pkt_id);
 
 	*ptr++ = DLE;
 	*ptr++ = ACK;
@@ -366,7 +366,7 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id)
 		*ptr++ = DLE;
 
 	*ptr++ = 0;
-	*ptr++ = 0xFF & (-cksum);
+	*ptr++ = (-cksum) & 0xFF;
 	*ptr++ = DLE;
 	*ptr++ = ETX;
 
@@ -423,9 +423,9 @@ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count)
 		n++;
 	}
 
-	if ((0xff & (cksum + *recpkt)) != 0) {
+	if (((cksum + *recpkt) & 0xff) != 0) {
 		dev_dbg(dev, "%s - invalid checksum, expected %02x, got %02x\n",
-			__func__, 0xff & -cksum, 0xff & *recpkt);
+			__func__, -cksum & 0xff, *recpkt);
 		return -EINVPKT;
 	}
 
@@ -528,7 +528,7 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
 					dev_dbg(dev, "NAK packet complete.\n");
 				} else {
 					dev_dbg(dev, "packet complete - id=0x%X.\n",
-						0xFF & data);
+							data);
 					gsp_rec_packet(garmin_data_p, size);
 				}
 
@@ -636,7 +636,7 @@ static int gsp_send(struct garmin_data *garmin_data_p,
 
 	garmin_data_p->outsize = 0;
 
-	if (GARMIN_LAYERID_APPL != getLayerId(garmin_data_p->outbuffer)) {
+	if (getLayerId(garmin_data_p->outbuffer) != GARMIN_LAYERID_APPL) {
 		dev_dbg(dev, "not an application packet (%d)\n",
 				getLayerId(garmin_data_p->outbuffer));
 		return -1;
@@ -688,7 +688,7 @@ static int gsp_send(struct garmin_data *garmin_data_p,
 			*dst++ = DLE;
 	}
 
-	cksum = 0xFF & -cksum;
+	cksum = -cksum & 0xFF;
 	*dst++ = cksum;
 	if (cksum == DLE)
 		*dst++ = DLE;
@@ -860,7 +860,6 @@ static int process_resetdev_request(struct usb_serial_port *port)
 static int garmin_clear(struct garmin_data *garmin_data_p)
 {
 	unsigned long flags;
-	int status = 0;
 
 	/* flush all queued data */
 	pkt_clear(garmin_data_p);
@@ -870,7 +869,7 @@ static int garmin_clear(struct garmin_data *garmin_data_p)
 	garmin_data_p->outsize = 0;
 	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
-	return status;
+	return 0;
 }
 
 
@@ -970,7 +969,7 @@ static void garmin_write_bulk_callback(struct urb *urb)
 		struct garmin_data *garmin_data_p =
 					usb_get_serial_port_data(port);
 
-		if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)) {
+		if (getLayerId(urb->transfer_buffer) == GARMIN_LAYERID_APPL) {
 
 			if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
 				gsp_send_ack(garmin_data_p,
@@ -1025,7 +1024,7 @@ static int garmin_write_bulk(struct usb_serial_port *port,
 				dismiss_ack ? NULL : port);
 	urb->transfer_flags |= URB_ZERO_PACKET;
 
-	if (GARMIN_LAYERID_APPL == getLayerId(buffer)) {
+	if (getLayerId(buffer) == GARMIN_LAYERID_APPL) {
 
 		spin_lock_irqsave(&garmin_data_p->lock, flags);
 		garmin_data_p->flags |= APP_REQ_SEEN;
@@ -1077,9 +1076,9 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
 		pktsiz = getDataLength(garmin_data_p->privpkt);
 		pktid  = getPacketId(garmin_data_p->privpkt);
 
-		if (count == (GARMIN_PKTHDR_LENGTH+pktsiz)
-		    && GARMIN_LAYERID_PRIVATE ==
-				getLayerId(garmin_data_p->privpkt)) {
+		if (count == (GARMIN_PKTHDR_LENGTH + pktsiz) &&
+				getLayerId(garmin_data_p->privpkt) ==
+						GARMIN_LAYERID_PRIVATE) {
 
 			dev_dbg(dev, "%s - processing private request %d\n",
 				__func__, pktid);
@@ -1192,7 +1191,7 @@ static void garmin_read_bulk_callback(struct urb *urb)
 	garmin_read_process(garmin_data_p, data, urb->actual_length, 1);
 
 	if (urb->actual_length == 0 &&
-			0 != (garmin_data_p->flags & FLAGS_BULK_IN_RESTART)) {
+			(garmin_data_p->flags & FLAGS_BULK_IN_RESTART) != 0) {
 		spin_lock_irqsave(&garmin_data_p->lock, flags);
 		garmin_data_p->flags &= ~FLAGS_BULK_IN_RESTART;
 		spin_unlock_irqrestore(&garmin_data_p->lock, flags);
@@ -1203,7 +1202,7 @@ static void garmin_read_bulk_callback(struct urb *urb)
 				__func__, retval);
 	} else if (urb->actual_length > 0) {
 		/* Continue trying to read until nothing more is received  */
-		if (0 == (garmin_data_p->flags & FLAGS_THROTTLED)) {
+		if ((garmin_data_p->flags & FLAGS_THROTTLED) == 0) {
 			retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 			if (retval)
 				dev_err(&port->dev,
@@ -1249,12 +1248,12 @@ static void garmin_read_int_callback(struct urb *urb)
 			      urb->transfer_buffer);
 
 	if (urb->actual_length == sizeof(GARMIN_BULK_IN_AVAIL_REPLY) &&
-	    0 == memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY,
-				sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) {
+		memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY,
+				sizeof(GARMIN_BULK_IN_AVAIL_REPLY)) == 0) {
 
 		dev_dbg(&port->dev, "%s - bulk data available.\n", __func__);
 
-		if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
+		if ((garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE) == 0) {
 
 			/* bulk data available */
 			retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
@@ -1276,8 +1275,8 @@ static void garmin_read_int_callback(struct urb *urb)
 		}
 
 	} else if (urb->actual_length == (4+sizeof(GARMIN_START_SESSION_REPLY))
-			 && 0 == memcmp(data, GARMIN_START_SESSION_REPLY,
-					sizeof(GARMIN_START_SESSION_REPLY))) {
+			 && memcmp(data, GARMIN_START_SESSION_REPLY,
+				 sizeof(GARMIN_START_SESSION_REPLY)) == 0) {
 
 		spin_lock_irqsave(&garmin_data_p->lock, flags);
 		garmin_data_p->flags |= FLAGS_SESSION_REPLY1_SEEN;
@@ -1356,7 +1355,7 @@ static void garmin_unthrottle(struct tty_struct *tty)
 	if (garmin_data_p->mode == MODE_NATIVE)
 		garmin_flush_queue(garmin_data_p);
 
-	if (0 != (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
+	if ((garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE) != 0) {
 		status = usb_submit_urb(port->read_urb, GFP_KERNEL);
 		if (status)
 			dev_err(&port->dev,
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 5ad4a0fb4b26..344b4eea4bd5 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -360,7 +360,7 @@ static void iuu_led_activity_on(struct urb *urb)
 	int result;
 	char *buf_ptr = port->write_urb->transfer_buffer;
 	*buf_ptr++ = IUU_SET_LED;
-	if (xmas == 1) {
+	if (xmas) {
 		get_random_bytes(buf_ptr, 6);
 		*(buf_ptr+7) = 1;
 	} else {
@@ -380,7 +380,7 @@ static void iuu_led_activity_off(struct urb *urb)
 	struct usb_serial_port *port = urb->context;
 	int result;
 	char *buf_ptr = port->write_urb->transfer_buffer;
-	if (xmas == 1) {
+	if (xmas) {
 		iuu_rxcmd(urb);
 		return;
 	} else {
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index e07b15ed5814..b6bd8e4a6486 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1963,7 +1963,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 	if (d_details->product_id == keyspan_usa49wg_product_id) {
 		dr = (void *)(s_priv->ctrl_buf);
 		dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT;
-		dr->bRequest = 0xB0;	/* 49wg control message */;
+		dr->bRequest = 0xB0;	/* 49wg control message */
 		dr->wValue = 0;
 		dr->wIndex = 0;
 		dr->wLength = cpu_to_le16(sizeof(msg));
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index e020ad28a00c..fc5d3a791e08 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -472,7 +472,6 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 		/* maybe this should be simulated by sending read
 		 * disable and read enable messages?
 		 */
-		;
 #if 0
 		priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
 		mct_u232_set_modem_ctrl(serial, priv->control_state);
@@ -527,7 +526,6 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 
 		mct_u232_set_line_ctrl(serial, priv->last_lcr);
 #endif
-		;
 	}
 	/*
 	 * Set flow control: well, I do not really now how to handle DTR/RTS.
@@ -546,7 +544,6 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 			priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
 		mct_u232_set_modem_ctrl(serial, priv->control_state);
 #endif
-		;
 	}
 	memcpy(cfg, &priv->cfg, sizeof(*cfg));
 	spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 02ea975754f5..ed378fb232e7 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1842,7 +1842,7 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 	Data = 0x0c;
 	mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
 
-	if (mos7840_port->read_urb_busy == false) {
+	if (!mos7840_port->read_urb_busy) {
 		mos7840_port->read_urb_busy = true;
 		status = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
 		if (status) {
@@ -1906,7 +1906,7 @@ static void mos7840_set_termios(struct tty_struct *tty,
 		return;
 	}
 
-	if (mos7840_port->read_urb_busy == false) {
+	if (!mos7840_port->read_urb_busy) {
 		mos7840_port->read_urb_busy = true;
 		status = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
 		if (status) {
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 504f5bff79c0..2df8ad5ede89 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -973,7 +973,7 @@ static int qt2_write(struct tty_struct *tty,
 
 	data = write_urb->transfer_buffer;
 	spin_lock_irqsave(&port_priv->urb_lock, flags);
-	if (port_priv->urb_in_use == true) {
+	if (port_priv->urb_in_use) {
 		dev_err(&port->dev, "qt2_write - urb is in use\n");
 		goto write_out;
 	}
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index b2dff0f14743..93c6c9b08daa 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -76,13 +76,8 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-
-#ifndef CONFIG_USB_SERIAL_SAFE_PADDED
-#define CONFIG_USB_SERIAL_SAFE_PADDED 0
-#endif
-
-static bool safe = 1;
-static bool padded = CONFIG_USB_SERIAL_SAFE_PADDED;
+static bool safe = true;
+static bool padded = IS_ENABLED(CONFIG_USB_SERIAL_SAFE_PADDED);
 
 #define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com, Johan Hovold <jhovold@gmail.com>"
 #define DRIVER_DESC "USB Safe Encapsulated Serial"
@@ -278,7 +273,7 @@ static int safe_startup(struct usb_serial *serial)
 	case LINEO_SAFESERIAL_CRC:
 		break;
 	case LINEO_SAFESERIAL_CRC_PADDED:
-		padded = 1;
+		padded = true;
 		break;
 	default:
 		return -EINVAL;