Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 123 insertions, 0 deletions

diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h
new file mode 100644
index 000000000000..5b8e867e2ae5
--- /dev/null
+++ b/drivers/usb/storage/shuttle_usbat.h
@@ -0,0 +1,123 @@
+/* Driver for SCM Microsystems USB-ATAPI cable
+ * Header File
+ *
+ * $Id: shuttle_usbat.h,v 1.5 2000/09/17 14:44:52 groovyjava Exp $
+ *
+ * Current development and maintenance by:
+ *   (c) 2000 Robert Baruch (autophile@dol.net)
+ *   (c) 2004, 2005 Daniel Drake <dsd@gentoo.org>
+ *
+ * See shuttle_usbat.c for more explanation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _USB_SHUTTLE_USBAT_H
+#define _USB_SHUTTLE_USBAT_H
+
+/* Supported device types */
+#define USBAT_DEV_HP8200	0x01
+#define USBAT_DEV_FLASH		0x02
+
+#define USBAT_EPP_PORT		0x10
+#define USBAT_EPP_REGISTER	0x30
+#define USBAT_ATA		0x40
+#define USBAT_ISA		0x50
+
+/* Commands (need to be logically OR'd with an access type */
+#define USBAT_CMD_READ_REG		0x00
+#define USBAT_CMD_WRITE_REG		0x01
+#define USBAT_CMD_READ_BLOCK	0x02
+#define USBAT_CMD_WRITE_BLOCK	0x03
+#define USBAT_CMD_COND_READ_BLOCK	0x04
+#define USBAT_CMD_COND_WRITE_BLOCK	0x05
+#define USBAT_CMD_WRITE_REGS	0x07
+
+/* Commands (these don't need an access type) */
+#define USBAT_CMD_EXEC_CMD	0x80
+#define USBAT_CMD_SET_FEAT	0x81
+#define USBAT_CMD_UIO		0x82
+
+/* Methods of accessing UIO register */
+#define USBAT_UIO_READ	1
+#define USBAT_UIO_WRITE	0
+
+/* Qualifier bits */
+#define USBAT_QUAL_FCQ	0x20 // full compare
+#define USBAT_QUAL_ALQ	0x10 // auto load subcount
+
+/* USBAT Flash Media status types */
+#define USBAT_FLASH_MEDIA_NONE	0
+#define USBAT_FLASH_MEDIA_CF	1
+
+/* USBAT Flash Media change types */
+#define USBAT_FLASH_MEDIA_SAME	0
+#define USBAT_FLASH_MEDIA_CHANGED	1
+
+/* USBAT ATA registers */
+#define USBAT_ATA_DATA      0x10  // read/write data (R/W)
+#define USBAT_ATA_FEATURES  0x11  // set features (W)
+#define USBAT_ATA_ERROR     0x11  // error (R)
+#define USBAT_ATA_SECCNT    0x12  // sector count (R/W)
+#define USBAT_ATA_SECNUM    0x13  // sector number (R/W)
+#define USBAT_ATA_LBA_ME    0x14  // cylinder low (R/W)
+#define USBAT_ATA_LBA_HI    0x15  // cylinder high (R/W)
+#define USBAT_ATA_DEVICE    0x16  // head/device selection (R/W)
+#define USBAT_ATA_STATUS    0x17  // device status (R)
+#define USBAT_ATA_CMD       0x17  // device command (W)
+#define USBAT_ATA_ALTSTATUS 0x0E  // status (no clear IRQ) (R)
+
+/* USBAT User I/O Data registers */
+#define USBAT_UIO_EPAD		0x80 // Enable Peripheral Control Signals
+#define USBAT_UIO_CDT		0x40 // Card Detect (Read Only)
+				     // CDT = ACKD & !UI1 & !UI0
+#define USBAT_UIO_1		0x20 // I/O 1
+#define USBAT_UIO_0		0x10 // I/O 0
+#define USBAT_UIO_EPP_ATA	0x08 // 1=EPP mode, 0=ATA mode
+#define USBAT_UIO_UI1		0x04 // Input 1
+#define USBAT_UIO_UI0		0x02 // Input 0
+#define USBAT_UIO_INTR_ACK	0x01 // Interrupt (ATA & ISA)/Acknowledge (EPP)
+
+/* USBAT User I/O Enable registers */
+#define USBAT_UIO_DRVRST	0x80 // Reset Peripheral
+#define USBAT_UIO_ACKD		0x40 // Enable Card Detect
+#define USBAT_UIO_OE1		0x20 // I/O 1 set=output/clr=input
+				     // If ACKD=1, set OE1 to 1 also.
+#define USBAT_UIO_OE0		0x10 // I/O 0 set=output/clr=input
+#define USBAT_UIO_ADPRST	0x01 // Reset SCM chip
+
+/* USBAT Features */
+#define USBAT_FEAT_ETEN	0x80 // External trigger enable
+#define USBAT_FEAT_U1	0x08
+#define USBAT_FEAT_U0	0x04
+#define USBAT_FEAT_ET1	0x02
+#define USBAT_FEAT_ET2	0x01
+
+extern int usbat_transport(struct scsi_cmnd *srb, struct us_data *us);
+extern int init_usbat(struct us_data *us);
+
+struct usbat_info {
+	int devicetype;
+
+	/* Used for Flash readers only */
+	unsigned long sectors;     // total sector count
+	unsigned long ssize;       // sector size in bytes
+
+	unsigned char sense_key;
+	unsigned long sense_asc;   // additional sense code
+	unsigned long sense_ascq;  // additional sense code qualifier
+};
+
+#endif