Merge 2.6.38-rc5 into usb-next

This is needed to resolve some merge conflicts that were found
in the USB host controller patches, and reported by Stephen Rothwell.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

65 files changed, 735 insertions, 433 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index d6ede989ff22..4ab49d4eebf4 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1607,6 +1607,7 @@ static const struct usb_device_id acm_ids[] = {
 	{ NOKIA_PCSUITE_ACM_INFO(0x0154), }, /* Nokia 5800 XpressMusic */
 	{ NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */
 	{ NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */
 	{ SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
 
 	/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 6ee4451bfe2d..47085e5879ab 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -342,7 +342,7 @@ static ssize_t wdm_write
 		goto outnp;
 	}
 
-	if (!file->f_flags && O_NONBLOCK)
+	if (!(file->f_flags & O_NONBLOCK))
 		r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE,
 								&desc->flags));
 	else
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index 9da250563027..df502a98d0df 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -192,12 +192,12 @@ int usb_create_ep_devs(struct device *parent,
 	ep_dev->dev.parent = parent;
 	ep_dev->dev.release = ep_device_release;
 	dev_set_name(&ep_dev->dev, "ep_%02x", endpoint->desc.bEndpointAddress);
-	device_enable_async_suspend(&ep_dev->dev);
 
 	retval = device_register(&ep_dev->dev);
 	if (retval)
 		goto error_register;
 
+	device_enable_async_suspend(&ep_dev->dev);
 	endpoint->ep_dev = ep_dev;
 	return retval;
 
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index b55d46070a25..f71e8e307e0f 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -405,7 +405,12 @@ static int suspend_common(struct device *dev, bool do_wakeup)
 			return retval;
 	}
 
-	synchronize_irq(pci_dev->irq);
+	/* If MSI-X is enabled, the driver will have synchronized all vectors
+	 * in pci_suspend(). If MSI or legacy PCI is enabled, that will be
+	 * synchronized here.
+	 */
+	if (!hcd->msix_enabled)
+		synchronize_irq(pci_dev->irq);
 
 	/* Downstream ports from this root hub should already be quiesced, so
 	 * there will be no DMA activity.  Now we can shut down the upstream
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index d0b782c4523a..24765fd6cf12 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1973,7 +1973,6 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 
 	dev_dbg(&rhdev->dev, "usb %s%s\n",
 			(msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume");
-	clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
 	if (!hcd->driver->bus_resume)
 		return -ENOENT;
 	if (hcd->state == HC_STATE_RUNNING)
@@ -1981,6 +1980,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 
 	hcd->state = HC_STATE_RESUMING;
 	status = hcd->driver->bus_resume(hcd);
+	clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
 	if (status == 0) {
 		/* TRSMRCY = 10 msec */
 		msleep(10);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index b98efae6a1cf..d041c6826e43 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -676,6 +676,8 @@ static void hub_init_func3(struct work_struct *ws);
 static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 {
 	struct usb_device *hdev = hub->hdev;
+	struct usb_hcd *hcd;
+	int ret;
 	int port1;
 	int status;
 	bool need_debounce_delay = false;
@@ -714,6 +716,25 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			usb_autopm_get_interface_no_resume(
 					to_usb_interface(hub->intfdev));
 			return;		/* Continues at init2: below */
+		} else if (type == HUB_RESET_RESUME) {
+			/* The internal host controller state for the hub device
+			 * may be gone after a host power loss on system resume.
+			 * Update the device's info so the HW knows it's a hub.
+			 */
+			hcd = bus_to_hcd(hdev->bus);
+			if (hcd->driver->update_hub_device) {
+				ret = hcd->driver->update_hub_device(hcd, hdev,
+						&hub->tt, GFP_NOIO);
+				if (ret < 0) {
+					dev_err(hub->intfdev, "Host not "
+							"accepting hub info "
+							"update.\n");
+					dev_err(hub->intfdev, "LS/FS devices "
+							"and hubs may not work "
+							"under this hub\n.");
+				}
+			}
+			hub_power_on(hub, true);
 		} else {
 			hub_power_on(hub, true);
 		}
@@ -2732,6 +2753,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 		udev->ttport = hdev->ttport;
 	} else if (udev->speed != USB_SPEED_HIGH
 			&& hdev->speed == USB_SPEED_HIGH) {
+		if (!hub->tt.hub) {
+			dev_err(&udev->dev, "parent hub has no TT\n");
+			retval = -EINVAL;
+			goto fail;
+		}
 		udev->tt = &hub->tt;
 		udev->ttport = port1;
 	}
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 48455397ef61..99ed91c7cdc6 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -521,7 +521,7 @@ config USB_LANGWELL
 	select USB_GADGET_SELECTED
 
 config USB_GADGET_EG20T
-	boolean "Intel EG20T(Topcliff) USB Device controller"
+	boolean "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC"
 	depends on PCI
 	select USB_GADGET_DUALSPEED
 	help
@@ -537,6 +537,11 @@ config USB_GADGET_EG20T
 	  This driver dose not support interrupt transfer or isochronous
 	  transfer modes.
 
+	  This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is
+	  for IVI(In-Vehicle Infotainment) use.
+	  ML7213 is companion chip for Intel Atom E6xx series.
+	  ML7213 is completely compatible for Intel EG20T PCH.
+
 config USB_EG20T
 	tristate
 	depends on USB_GADGET_EG20T
@@ -553,6 +558,8 @@ config USB_GADGET_CI13XXX_MSM
 	  ci13xxx_udc core.
 	  This driver depends on OTG driver for PHY initialization,
 	  clock management, powering up VBUS, and power management.
+	  This driver is not supported on boards like trout which
+	  has an external PHY.
 
 	  Say "y" to link the driver statically, or "m" to build a
 	  dynamically linked module called "ci13xxx_msm" and force all
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 31656a2b4ab4..a1c67ae1572a 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -76,10 +76,21 @@ static DEFINE_SPINLOCK(udc_lock);
 
 /* control endpoint description */
 static const struct usb_endpoint_descriptor
-ctrl_endpt_desc = {
+ctrl_endpt_out_desc = {
 	.bLength         = USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType = USB_DT_ENDPOINT,
 
+	.bEndpointAddress = USB_DIR_OUT,
+	.bmAttributes    = USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
+};
+
+static const struct usb_endpoint_descriptor
+ctrl_endpt_in_desc = {
+	.bLength         = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bEndpointAddress = USB_DIR_IN,
 	.bmAttributes    = USB_ENDPOINT_XFER_CONTROL,
 	.wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
 };
@@ -265,10 +276,10 @@ static int hw_device_init(void __iomem *base)
 	hw_bank.size /= sizeof(u32);
 
 	reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN);
-	if (reg == 0 || reg > ENDPT_MAX)
-		return -ENODEV;
+	hw_ep_max = reg * 2;   /* cache hw ENDPT_MAX */
 
-	hw_ep_max = reg;   /* cache hw ENDPT_MAX */
+	if (hw_ep_max == 0 || hw_ep_max > ENDPT_MAX)
+		return -ENODEV;
 
 	/* setup lock mode ? */
 
@@ -1197,16 +1208,17 @@ static ssize_t show_qheads(struct device *dev, struct device_attribute *attr,
 	}
 
 	spin_lock_irqsave(udc->lock, flags);
-	for (i = 0; i < hw_ep_max; i++) {
-		struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i];
+	for (i = 0; i < hw_ep_max/2; i++) {
+		struct ci13xxx_ep *mEpRx = &udc->ci13xxx_ep[i];
+		struct ci13xxx_ep *mEpTx = &udc->ci13xxx_ep[i + hw_ep_max/2];
 		n += scnprintf(buf + n, PAGE_SIZE - n,
 			       "EP=%02i: RX=%08X TX=%08X\n",
-			       i, (u32)mEp->qh[RX].dma, (u32)mEp->qh[TX].dma);
+			       i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma);
 		for (j = 0; j < (sizeof(struct ci13xxx_qh)/sizeof(u32)); j++) {
 			n += scnprintf(buf + n, PAGE_SIZE - n,
 				       " %04X:    %08X    %08X\n", j,
-				       *((u32 *)mEp->qh[RX].ptr + j),
-				       *((u32 *)mEp->qh[TX].ptr + j));
+				       *((u32 *)mEpRx->qh.ptr + j),
+				       *((u32 *)mEpTx->qh.ptr + j));
 		}
 	}
 	spin_unlock_irqrestore(udc->lock, flags);
@@ -1293,7 +1305,7 @@ static ssize_t show_requests(struct device *dev, struct device_attribute *attr,
 	unsigned long flags;
 	struct list_head   *ptr = NULL;
 	struct ci13xxx_req *req = NULL;
-	unsigned i, j, k, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32);
+	unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32);
 
 	dbg_trace("[%s] %p\n", __func__, buf);
 	if (attr == NULL || buf == NULL) {
@@ -1303,22 +1315,20 @@ static ssize_t show_requests(struct device *dev, struct device_attribute *attr,
 
 	spin_lock_irqsave(udc->lock, flags);
 	for (i = 0; i < hw_ep_max; i++)
-		for (k = RX; k <= TX; k++)
-			list_for_each(ptr, &udc->ci13xxx_ep[i].qh[k].queue)
-			{
-				req = list_entry(ptr,
-						 struct ci13xxx_req, queue);
+		list_for_each(ptr, &udc->ci13xxx_ep[i].qh.queue)
+		{
+			req = list_entry(ptr, struct ci13xxx_req, queue);
+
+			n += scnprintf(buf + n, PAGE_SIZE - n,
+					"EP=%02i: TD=%08X %s\n",
+					i % hw_ep_max/2, (u32)req->dma,
+					((i < hw_ep_max/2) ? "RX" : "TX"));
 
+			for (j = 0; j < qSize; j++)
 				n += scnprintf(buf + n, PAGE_SIZE - n,
-					       "EP=%02i: TD=%08X %s\n",
-					       i, (u32)req->dma,
-					       ((k == RX) ? "RX" : "TX"));
-
-				for (j = 0; j < qSize; j++)
-					n += scnprintf(buf + n, PAGE_SIZE - n,
-						       " %04X:    %08X\n", j,
-						       *((u32 *)req->ptr + j));
-			}
+						" %04X:    %08X\n", j,
+						*((u32 *)req->ptr + j));
+		}
 	spin_unlock_irqrestore(udc->lock, flags);
 
 	return n;
@@ -1467,12 +1477,12 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 	 *  At this point it's guaranteed exclusive access to qhead
 	 *  (endpt is not primed) so it's no need to use tripwire
 	 */
-	mEp->qh[mEp->dir].ptr->td.next   = mReq->dma;    /* TERMINATE = 0 */
-	mEp->qh[mEp->dir].ptr->td.token &= ~TD_STATUS;   /* clear status */
+	mEp->qh.ptr->td.next   = mReq->dma;    /* TERMINATE = 0 */
+	mEp->qh.ptr->td.token &= ~TD_STATUS;   /* clear status */
 	if (mReq->req.zero == 0)
-		mEp->qh[mEp->dir].ptr->cap |=  QH_ZLT;
+		mEp->qh.ptr->cap |=  QH_ZLT;
 	else
-		mEp->qh[mEp->dir].ptr->cap &= ~QH_ZLT;
+		mEp->qh.ptr->cap &= ~QH_ZLT;
 
 	wmb();   /* synchronize before ep prime */
 
@@ -1542,11 +1552,11 @@ __acquires(mEp->lock)
 
 	hw_ep_flush(mEp->num, mEp->dir);
 
-	while (!list_empty(&mEp->qh[mEp->dir].queue)) {
+	while (!list_empty(&mEp->qh.queue)) {
 
 		/* pop oldest request */
 		struct ci13xxx_req *mReq = \
-			list_entry(mEp->qh[mEp->dir].queue.next,
+			list_entry(mEp->qh.queue.next,
 				   struct ci13xxx_req, queue);
 		list_del_init(&mReq->queue);
 		mReq->req.status = -ESHUTDOWN;
@@ -1571,8 +1581,6 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
 {
 	struct usb_ep *ep;
 	struct ci13xxx    *udc = container_of(gadget, struct ci13xxx, gadget);
-	struct ci13xxx_ep *mEp = container_of(gadget->ep0,
-					      struct ci13xxx_ep, ep);
 
 	trace("%p", gadget);
 
@@ -1583,7 +1591,8 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
 	gadget_for_each_ep(ep, gadget) {
 		usb_ep_fifo_flush(ep);
 	}
-	usb_ep_fifo_flush(gadget->ep0);
+	usb_ep_fifo_flush(&udc->ep0out.ep);
+	usb_ep_fifo_flush(&udc->ep0in.ep);
 
 	udc->driver->disconnect(gadget);
 
@@ -1591,11 +1600,12 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
 	gadget_for_each_ep(ep, gadget) {
 		usb_ep_disable(ep);
 	}
-	usb_ep_disable(gadget->ep0);
+	usb_ep_disable(&udc->ep0out.ep);
+	usb_ep_disable(&udc->ep0in.ep);
 
-	if (mEp->status != NULL) {
-		usb_ep_free_request(gadget->ep0, mEp->status);
-		mEp->status = NULL;
+	if (udc->status != NULL) {
+		usb_ep_free_request(&udc->ep0in.ep, udc->status);
+		udc->status = NULL;
 	}
 
 	return 0;
@@ -1614,7 +1624,6 @@ static void isr_reset_handler(struct ci13xxx *udc)
 __releases(udc->lock)
 __acquires(udc->lock)
 {
-	struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[0];
 	int retval;
 
 	trace("%p", udc);
@@ -1635,11 +1644,15 @@ __acquires(udc->lock)
 	if (retval)
 		goto done;
 
-	retval = usb_ep_enable(&mEp->ep, &ctrl_endpt_desc);
+	retval = usb_ep_enable(&udc->ep0out.ep, &ctrl_endpt_out_desc);
+	if (retval)
+		goto done;
+
+	retval = usb_ep_enable(&udc->ep0in.ep, &ctrl_endpt_in_desc);
 	if (!retval) {
-		mEp->status = usb_ep_alloc_request(&mEp->ep, GFP_ATOMIC);
-		if (mEp->status == NULL) {
-			usb_ep_disable(&mEp->ep);
+		udc->status = usb_ep_alloc_request(&udc->ep0in.ep, GFP_ATOMIC);
+		if (udc->status == NULL) {
+			usb_ep_disable(&udc->ep0out.ep);
 			retval = -ENOMEM;
 		}
 	}
@@ -1672,16 +1685,17 @@ static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
 
 /**
  * isr_get_status_response: get_status request response
- * @ep:    endpoint
+ * @udc: udc struct
  * @setup: setup request packet
  *
  * This function returns an error code
  */
-static int isr_get_status_response(struct ci13xxx_ep *mEp,
+static int isr_get_status_response(struct ci13xxx *udc,
 				   struct usb_ctrlrequest *setup)
 __releases(mEp->lock)
 __acquires(mEp->lock)
 {
+	struct ci13xxx_ep *mEp = &udc->ep0in;
 	struct usb_request *req = NULL;
 	gfp_t gfp_flags = GFP_ATOMIC;
 	int dir, num, retval;
@@ -1736,27 +1750,23 @@ __acquires(mEp->lock)
 
 /**
  * isr_setup_status_phase: queues the status phase of a setup transation
- * @mEp: endpoint
+ * @udc: udc struct
  *
  * This function returns an error code
  */
-static int isr_setup_status_phase(struct ci13xxx_ep *mEp)
+static int isr_setup_status_phase(struct ci13xxx *udc)
 __releases(mEp->lock)
 __acquires(mEp->lock)
 {
 	int retval;
+	struct ci13xxx_ep *mEp;
 
-	trace("%p", mEp);
-
-	/* mEp is always valid & configured */
-
-	if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
-		mEp->dir = (mEp->dir == TX) ? RX : TX;
+	trace("%p", udc);
 
-	mEp->status->no_interrupt = 1;
+	mEp = (udc->ep0_dir == TX) ? &udc->ep0out : &udc->ep0in;
 
 	spin_unlock(mEp->lock);
-	retval = usb_ep_queue(&mEp->ep, mEp->status, GFP_ATOMIC);
+	retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC);
 	spin_lock(mEp->lock);
 
 	return retval;
@@ -1778,11 +1788,11 @@ __acquires(mEp->lock)
 
 	trace("%p", mEp);
 
-	if (list_empty(&mEp->qh[mEp->dir].queue))
+	if (list_empty(&mEp->qh.queue))
 		return -EINVAL;
 
 	/* pop oldest request */
-	mReq = list_entry(mEp->qh[mEp->dir].queue.next,
+	mReq = list_entry(mEp->qh.queue.next,
 			  struct ci13xxx_req, queue);
 	list_del_init(&mReq->queue);
 
@@ -1794,10 +1804,10 @@ __acquires(mEp->lock)
 
 	dbg_done(_usb_addr(mEp), mReq->ptr->token, retval);
 
-	if (!list_empty(&mEp->qh[mEp->dir].queue)) {
+	if (!list_empty(&mEp->qh.queue)) {
 		struct ci13xxx_req* mReqEnq;
 
-		mReqEnq = list_entry(mEp->qh[mEp->dir].queue.next,
+		mReqEnq = list_entry(mEp->qh.queue.next,
 				  struct ci13xxx_req, queue);
 		_hardware_enqueue(mEp, mReqEnq);
 	}
@@ -1836,16 +1846,14 @@ __acquires(udc->lock)
 		int type, num, err = -EINVAL;
 		struct usb_ctrlrequest req;
 
-
 		if (mEp->desc == NULL)
 			continue;   /* not configured */
 
-		if ((mEp->dir == RX && hw_test_and_clear_complete(i)) ||
-		    (mEp->dir == TX && hw_test_and_clear_complete(i + 16))) {
+		if (hw_test_and_clear_complete(i)) {
 			err = isr_tr_complete_low(mEp);
 			if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
 				if (err > 0)   /* needs status phase */
-					err = isr_setup_status_phase(mEp);
+					err = isr_setup_status_phase(udc);
 				if (err < 0) {
 					dbg_event(_usb_addr(mEp),
 						  "ERROR", err);
@@ -1866,15 +1874,22 @@ __acquires(udc->lock)
 			continue;
 		}
 
+		/*
+		 * Flush data and handshake transactions of previous
+		 * setup packet.
+		 */
+		_ep_nuke(&udc->ep0out);
+		_ep_nuke(&udc->ep0in);
+
 		/* read_setup_packet */
 		do {
 			hw_test_and_set_setup_guard();
-			memcpy(&req, &mEp->qh[RX].ptr->setup, sizeof(req));
+			memcpy(&req, &mEp->qh.ptr->setup, sizeof(req));
 		} while (!hw_test_and_clear_setup_guard());
 
 		type = req.bRequestType;
 
-		mEp->dir = (type & USB_DIR_IN) ? TX : RX;
+		udc->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
 
 		dbg_setup(_usb_addr(mEp), &req);
 
@@ -1895,7 +1910,7 @@ __acquires(udc->lock)
 				if (err)
 					break;
 			}
-			err = isr_setup_status_phase(mEp);
+			err = isr_setup_status_phase(udc);
 			break;
 		case USB_REQ_GET_STATUS:
 			if (type != (USB_DIR_IN|USB_RECIP_DEVICE)   &&
@@ -1905,7 +1920,7 @@ __acquires(udc->lock)
 			if (le16_to_cpu(req.wLength) != 2 ||
 			    le16_to_cpu(req.wValue)  != 0)
 				break;
-			err = isr_get_status_response(mEp, &req);
+			err = isr_get_status_response(udc, &req);
 			break;
 		case USB_REQ_SET_ADDRESS:
 			if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
@@ -1916,7 +1931,7 @@ __acquires(udc->lock)
 			err = hw_usb_set_address((u8)le16_to_cpu(req.wValue));
 			if (err)
 				break;
-			err = isr_setup_status_phase(mEp);
+			err = isr_setup_status_phase(udc);
 			break;
 		case USB_REQ_SET_FEATURE:
 			if (type != (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
@@ -1932,12 +1947,12 @@ __acquires(udc->lock)
 			spin_lock(udc->lock);
 			if (err)
 				break;
-			err = isr_setup_status_phase(mEp);
+			err = isr_setup_status_phase(udc);
 			break;
 		default:
 delegate:
 			if (req.wLength == 0)   /* no data phase */
-				mEp->dir = TX;
+				udc->ep0_dir = TX;
 
 			spin_unlock(udc->lock);
 			err = udc->driver->setup(&udc->gadget, &req);
@@ -1968,7 +1983,7 @@ static int ep_enable(struct usb_ep *ep,
 		     const struct usb_endpoint_descriptor *desc)
 {
 	struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
-	int direction, retval = 0;
+	int retval = 0;
 	unsigned long flags;
 
 	trace("%p, %p", ep, desc);
@@ -1982,7 +1997,7 @@ static int ep_enable(struct usb_ep *ep,
 
 	mEp->desc = desc;
 
-	if (!list_empty(&mEp->qh[mEp->dir].queue))
+	if (!list_empty(&mEp->qh.queue))
 		warn("enabling a non-empty endpoint!");
 
 	mEp->dir  = usb_endpoint_dir_in(desc) ? TX : RX;
@@ -1991,29 +2006,22 @@ static int ep_enable(struct usb_ep *ep,
 
 	mEp->ep.maxpacket = __constant_le16_to_cpu(desc->wMaxPacketSize);
 
-	direction = mEp->dir;
-	do {
-		dbg_event(_usb_addr(mEp), "ENABLE", 0);
+	dbg_event(_usb_addr(mEp), "ENABLE", 0);
 
-		mEp->qh[mEp->dir].ptr->cap = 0;
+	mEp->qh.ptr->cap = 0;
 
-		if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
-			mEp->qh[mEp->dir].ptr->cap |=  QH_IOS;
-		else if (mEp->type == USB_ENDPOINT_XFER_ISOC)
-			mEp->qh[mEp->dir].ptr->cap &= ~QH_MULT;
-		else
-			mEp->qh[mEp->dir].ptr->cap &= ~QH_ZLT;
-
-		mEp->qh[mEp->dir].ptr->cap |=
-			(mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT;
-		mEp->qh[mEp->dir].ptr->td.next |= TD_TERMINATE;   /* needed? */
-
-		retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type);
+	if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
+		mEp->qh.ptr->cap |=  QH_IOS;
+	else if (mEp->type == USB_ENDPOINT_XFER_ISOC)
+		mEp->qh.ptr->cap &= ~QH_MULT;
+	else
+		mEp->qh.ptr->cap &= ~QH_ZLT;
 
-		if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
-			mEp->dir = (mEp->dir == TX) ? RX : TX;
+	mEp->qh.ptr->cap |=
+		(mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT;
+	mEp->qh.ptr->td.next |= TD_TERMINATE;   /* needed? */
 
-	} while (mEp->dir != direction);
+	retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type);
 
 	spin_unlock_irqrestore(mEp->lock, flags);
 	return retval;
@@ -2146,7 +2154,7 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 	spin_lock_irqsave(mEp->lock, flags);
 
 	if (mEp->type == USB_ENDPOINT_XFER_CONTROL &&
-	    !list_empty(&mEp->qh[mEp->dir].queue)) {
+	    !list_empty(&mEp->qh.queue)) {
 		_ep_nuke(mEp);
 		retval = -EOVERFLOW;
 		warn("endpoint ctrl %X nuked", _usb_addr(mEp));
@@ -2170,9 +2178,9 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 	/* push request */
 	mReq->req.status = -EINPROGRESS;
 	mReq->req.actual = 0;
-	list_add_tail(&mReq->queue, &mEp->qh[mEp->dir].queue);
+	list_add_tail(&mReq->queue, &mEp->qh.queue);
 
-	if (list_is_singular(&mEp->qh[mEp->dir].queue))
+	if (list_is_singular(&mEp->qh.queue))
 		retval = _hardware_enqueue(mEp, mReq);
 
 	if (retval == -EALREADY) {
@@ -2199,7 +2207,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 	trace("%p, %p", ep, req);
 
 	if (ep == NULL || req == NULL || mEp->desc == NULL ||
-	    list_empty(&mReq->queue)  || list_empty(&mEp->qh[mEp->dir].queue))
+	    list_empty(&mReq->queue)  || list_empty(&mEp->qh.queue))
 		return -EINVAL;
 
 	spin_lock_irqsave(mEp->lock, flags);
@@ -2244,7 +2252,7 @@ static int ep_set_halt(struct usb_ep *ep, int value)
 #ifndef STALL_IN
 	/* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
 	if (value && mEp->type == USB_ENDPOINT_XFER_BULK && mEp->dir == TX &&
-	    !list_empty(&mEp->qh[mEp->dir].queue)) {
+	    !list_empty(&mEp->qh.queue)) {
 		spin_unlock_irqrestore(mEp->lock, flags);
 		return -EAGAIN;
 	}
@@ -2355,7 +2363,7 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
 		if (is_active) {
 			pm_runtime_get_sync(&_gadget->dev);
 			hw_device_reset(udc);
-			hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma);
+			hw_device_state(udc->ep0out.qh.dma);
 		} else {
 			hw_device_state(0);
 			if (udc->udc_driver->notify_event)
@@ -2390,7 +2398,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct ci13xxx *udc = _udc;
-	unsigned long i, k, flags;
+	unsigned long flags;
+	int i, j;
 	int retval = -ENOMEM;
 
 	trace("%p", driver);
@@ -2427,45 +2436,46 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 
 	info("hw_ep_max = %d", hw_ep_max);
 
-	udc->driver = driver;
 	udc->gadget.dev.driver = NULL;
 
 	retval = 0;
-	for (i = 0; i < hw_ep_max; i++) {
-		struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i];
+	for (i = 0; i < hw_ep_max/2; i++) {
+		for (j = RX; j <= TX; j++) {
+			int k = i + j * hw_ep_max/2;
+			struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k];
 
-		scnprintf(mEp->name, sizeof(mEp->name), "ep%i", (int)i);
+			scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i,
+					(j == TX)  ? "in" : "out");
 
-		mEp->lock         = udc->lock;
-		mEp->device       = &udc->gadget.dev;
-		mEp->td_pool      = udc->td_pool;
+			mEp->lock         = udc->lock;
+			mEp->device       = &udc->gadget.dev;
+			mEp->td_pool      = udc->td_pool;
 
-		mEp->ep.name      = mEp->name;
-		mEp->ep.ops       = &usb_ep_ops;
-		mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
+			mEp->ep.name      = mEp->name;
+			mEp->ep.ops       = &usb_ep_ops;
+			mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
 
-		/* this allocation cannot be random */
-		for (k = RX; k <= TX; k++) {
-			INIT_LIST_HEAD(&mEp->qh[k].queue);
+			INIT_LIST_HEAD(&mEp->qh.queue);
 			spin_unlock_irqrestore(udc->lock, flags);
-			mEp->qh[k].ptr = dma_pool_alloc(udc->qh_pool,
-							GFP_KERNEL,
-							&mEp->qh[k].dma);
+			mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL,
+					&mEp->qh.dma);
 			spin_lock_irqsave(udc->lock, flags);
-			if (mEp->qh[k].ptr == NULL)
+			if (mEp->qh.ptr == NULL)
 				retval = -ENOMEM;
 			else
-				memset(mEp->qh[k].ptr, 0,
-				       sizeof(*mEp->qh[k].ptr));
-		}
-		if (i == 0)
-			udc->gadget.ep0 = &mEp->ep;
-		else
+				memset(mEp->qh.ptr, 0, sizeof(*mEp->qh.ptr));
+
+			/* skip ep0 out and in endpoints */
+			if (i == 0)
+				continue;
+
 			list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list);
+		}
 	}
 	if (retval)
 		goto done;
 
+	udc->gadget.ep0 = &udc->ep0in.ep;
 	/* bind gadget */
 	driver->driver.bus     = NULL;
 	udc->gadget.dev.driver = &driver->driver;
@@ -2479,6 +2489,7 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 		goto done;
 	}
 
+	udc->driver = driver;
 	pm_runtime_get_sync(&udc->gadget.dev);
 	if (udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) {
 		if (udc->vbus_active) {
@@ -2490,14 +2501,12 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 		}
 	}
 
-	retval = hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma);
+	retval = hw_device_state(udc->ep0out.qh.dma);
 	if (retval)
 		pm_runtime_put_sync(&udc->gadget.dev);
 
  done:
 	spin_unlock_irqrestore(udc->lock, flags);
-	if (retval)
-		usb_gadget_unregister_driver(driver);
 	return retval;
 }
 EXPORT_SYMBOL(usb_gadget_probe_driver);
@@ -2510,7 +2519,7 @@ EXPORT_SYMBOL(usb_gadget_probe_driver);
 int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 {
 	struct ci13xxx *udc = _udc;
-	unsigned long i, k, flags;
+	unsigned long i, flags;
 
 	trace("%p", driver);
 
@@ -2546,17 +2555,14 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 	for (i = 0; i < hw_ep_max; i++) {
 		struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i];
 
-		if (i == 0)
-			udc->gadget.ep0 = NULL;
-		else if (!list_empty(&mEp->ep.ep_list))
+		if (!list_empty(&mEp->ep.ep_list))
 			list_del_init(&mEp->ep.ep_list);
 
-		for (k = RX; k <= TX; k++)
-			if (mEp->qh[k].ptr != NULL)
-				dma_pool_free(udc->qh_pool,
-					      mEp->qh[k].ptr, mEp->qh[k].dma);
+		if (mEp->qh.ptr != NULL)
+			dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma);
 	}
 
+	udc->gadget.ep0 = NULL;
 	udc->driver = NULL;
 
 	spin_unlock_irqrestore(udc->lock, flags);
diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h
index f61fed07f76b..a2492b65f98c 100644
--- a/drivers/usb/gadget/ci13xxx_udc.h
+++ b/drivers/usb/gadget/ci13xxx_udc.h
@@ -20,7 +20,7 @@
  * DEFINE
  *****************************************************************************/
 #define CI13XXX_PAGE_SIZE  4096ul /* page size for TD's */
-#define ENDPT_MAX          (16)
+#define ENDPT_MAX          (32)
 #define CTRL_PAYLOAD_MAX   (64)
 #define RX        (0)  /* similar to USB_DIR_OUT but can be used as an index */
 #define TX        (1)  /* similar to USB_DIR_IN  but can be used as an index */
@@ -88,8 +88,7 @@ struct ci13xxx_ep {
 		struct list_head   queue;
 		struct ci13xxx_qh *ptr;
 		dma_addr_t         dma;
-	}                                      qh[2];
-	struct usb_request                    *status;
+	}                                      qh;
 	int                                    wedge;
 
 	/* global resources */
@@ -119,9 +118,13 @@ struct ci13xxx {
 
 	struct dma_pool           *qh_pool;   /* DMA pool for queue heads */
 	struct dma_pool           *td_pool;   /* DMA pool for transfer descs */
+	struct usb_request        *status;    /* ep0 status request */
 
 	struct usb_gadget          gadget;     /* USB slave device */
 	struct ci13xxx_ep          ci13xxx_ep[ENDPT_MAX]; /* extended endpts */
+	u32                        ep0_dir;    /* ep0 direction */
+#define ep0out ci13xxx_ep[0]
+#define ep0in  ci13xxx_ep[16]
 
 	struct usb_gadget_driver  *driver;     /* 3rd party gadget driver */
 	struct ci13xxx_udc_driver *udc_driver; /* device controller driver */
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index f6ff8456d52d..1ba4befe336b 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -928,8 +928,9 @@ unknown:
 		 */
 		switch (ctrl->bRequestType & USB_RECIP_MASK) {
 		case USB_RECIP_INTERFACE:
-			if (cdev->config)
-				f = cdev->config->interface[intf];
+			if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
+				break;
+			f = cdev->config->interface[intf];
 			break;
 
 		case USB_RECIP_ENDPOINT:
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index b5dbb2308f56..6d8e533949eb 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -293,6 +293,7 @@
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/composite.h>
 
 #include "gadget_chips.h"
 
@@ -2763,7 +2764,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 			return ERR_PTR(-ENOMEM);
 		common->free_storage_on_release = 1;
 	} else {
-		memset(common, 0, sizeof common);
+		memset(common, 0, sizeof *common);
 		common->free_storage_on_release = 0;
 	}
 
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 0c8dd81dddca..b120dbb64d0f 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -198,10 +198,10 @@
 #define PCH_UDC_BRLEN		0x0F	/* Burst length */
 #define PCH_UDC_THLEN		0x1F	/* Threshold length */
 /* Value of EP Buffer Size */
-#define UDC_EP0IN_BUFF_SIZE	64
-#define UDC_EPIN_BUFF_SIZE	512
-#define UDC_EP0OUT_BUFF_SIZE	64
-#define UDC_EPOUT_BUFF_SIZE	512
+#define UDC_EP0IN_BUFF_SIZE	16
+#define UDC_EPIN_BUFF_SIZE	256
+#define UDC_EP0OUT_BUFF_SIZE	16
+#define UDC_EPOUT_BUFF_SIZE	256
 /* Value of EP maximum packet size */
 #define UDC_EP0IN_MAX_PKT_SIZE	64
 #define UDC_EP0OUT_MAX_PKT_SIZE	64
@@ -351,7 +351,7 @@ struct pch_udc_dev {
 	struct pci_pool		*data_requests;
 	struct pci_pool		*stp_requests;
 	dma_addr_t			dma_addr;
-	unsigned long			ep0out_buf[64];
+	void				*ep0out_buf;
 	struct usb_ctrlrequest		setup_data;
 	unsigned long			phys_addr;
 	void __iomem			*base_addr;
@@ -361,6 +361,8 @@ struct pch_udc_dev {
 
 #define PCH_UDC_PCI_BAR			1
 #define PCI_DEVICE_ID_INTEL_EG20T_UDC	0x8808
+#define PCI_VENDOR_ID_ROHM		0x10DB
+#define PCI_DEVICE_ID_ML7213_IOH_UDC	0x801D
 
 static const char	ep0_string[] = "ep0in";
 static DEFINE_SPINLOCK(udc_stall_spinlock);	/* stall spin lock */
@@ -1219,11 +1221,11 @@ static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req,
 	dev = ep->dev;
 	if (req->dma_mapped) {
 		if (ep->in)
-			pci_unmap_single(dev->pdev, req->req.dma,
-					 req->req.length, PCI_DMA_TODEVICE);
+			dma_unmap_single(&dev->pdev->dev, req->req.dma,
+					 req->req.length, DMA_TO_DEVICE);
 		else
-			pci_unmap_single(dev->pdev, req->req.dma,
-					 req->req.length, PCI_DMA_FROMDEVICE);
+			dma_unmap_single(&dev->pdev->dev, req->req.dma,
+					 req->req.length, DMA_FROM_DEVICE);
 		req->dma_mapped = 0;
 		req->req.dma = DMA_ADDR_INVALID;
 	}
@@ -1414,7 +1416,6 @@ static void pch_udc_start_rxrequest(struct pch_udc_ep *ep,
 
 	pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
 	td_data = req->td_data;
-	ep->td_data = req->td_data;
 	/* Set the status bits for all descriptors */
 	while (1) {
 		td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) |
@@ -1613,15 +1614,19 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
 	if (usbreq->length &&
 	    ((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) {
 		if (ep->in)
-			usbreq->dma = pci_map_single(dev->pdev, usbreq->buf,
-					usbreq->length, PCI_DMA_TODEVICE);
+			usbreq->dma = dma_map_single(&dev->pdev->dev,
+						     usbreq->buf,
+						     usbreq->length,
+						     DMA_TO_DEVICE);
 		else
-			usbreq->dma = pci_map_single(dev->pdev, usbreq->buf,
-					usbreq->length, PCI_DMA_FROMDEVICE);
+			usbreq->dma = dma_map_single(&dev->pdev->dev,
+						     usbreq->buf,
+						     usbreq->length,
+						     DMA_FROM_DEVICE);
 		req->dma_mapped = 1;
 	}
 	if (usbreq->length > 0) {
-		retval = prepare_dma(ep, req, gfp);
+		retval = prepare_dma(ep, req, GFP_ATOMIC);
 		if (retval)
 			goto probe_end;
 	}
@@ -1646,7 +1651,6 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
 			pch_udc_wait_ep_stall(ep);
 			pch_udc_ep_clear_nak(ep);
 			pch_udc_enable_ep_interrupts(ep->dev, (1 << ep->num));
-			pch_udc_set_dma(dev, DMA_DIR_TX);
 		}
 	}
 	/* Now add this request to the ep's pending requests */
@@ -1926,6 +1930,7 @@ static void pch_udc_complete_receiver(struct pch_udc_ep *ep)
 	    PCH_UDC_BS_DMA_DONE)
 		return;
 	pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
+	pch_udc_ep_set_ddptr(ep, 0);
 	if ((req->td_data_last->status & PCH_UDC_RXTX_STS) !=
 	    PCH_UDC_RTS_SUCC) {
 		dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) "
@@ -1963,7 +1968,7 @@ static void pch_udc_svc_data_in(struct pch_udc_dev *dev, int ep_num)
 	u32	epsts;
 	struct pch_udc_ep	*ep;
 
-	ep = &dev->ep[2*ep_num];
+	ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
 	epsts = ep->epsts;
 	ep->epsts = 0;
 
@@ -2008,7 +2013,7 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
 	struct pch_udc_ep		*ep;
 	struct pch_udc_request		*req = NULL;
 
-	ep = &dev->ep[2*ep_num + 1];
+	ep = &dev->ep[UDC_EPOUT_IDX(ep_num)];
 	epsts = ep->epsts;
 	ep->epsts = 0;
 
@@ -2025,10 +2030,11 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
 	}
 	if (epsts & UDC_EPSTS_HE)
 		return;
-	if (epsts & UDC_EPSTS_RSS)
+	if (epsts & UDC_EPSTS_RSS) {
 		pch_udc_ep_set_stall(ep);
 		pch_udc_enable_ep_interrupts(ep->dev,
 					     PCH_UDC_EPINT(ep->in, ep->num));
+	}
 	if (epsts & UDC_EPSTS_RCS) {
 		if (!dev->prot_stall) {
 			pch_udc_ep_clear_stall(ep);
@@ -2060,8 +2066,10 @@ static void pch_udc_svc_control_in(struct pch_udc_dev *dev)
 {
 	u32	epsts;
 	struct pch_udc_ep	*ep;
+	struct pch_udc_ep	*ep_out;
 
 	ep = &dev->ep[UDC_EP0IN_IDX];
+	ep_out = &dev->ep[UDC_EP0OUT_IDX];
 	epsts = ep->epsts;
 	ep->epsts = 0;
 
@@ -2073,8 +2081,16 @@ static void pch_udc_svc_control_in(struct pch_udc_dev *dev)
 		return;
 	if (epsts & UDC_EPSTS_HE)
 		return;
-	if ((epsts & UDC_EPSTS_TDC) && (!dev->stall))
+	if ((epsts & UDC_EPSTS_TDC) && (!dev->stall)) {
 		pch_udc_complete_transfer(ep);
+		pch_udc_clear_dma(dev, DMA_DIR_RX);
+		ep_out->td_data->status = (ep_out->td_data->status &
+					~PCH_UDC_BUFF_STS) |
+					PCH_UDC_BS_HST_RDY;
+		pch_udc_ep_clear_nak(ep_out);
+		pch_udc_set_dma(dev, DMA_DIR_RX);
+		pch_udc_ep_set_rrdy(ep_out);
+	}
 	/* On IN interrupt, provide data if we have any */
 	if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_TDC) &&
 	     !(epsts & UDC_EPSTS_TXEMPTY))
@@ -2102,11 +2118,9 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
 		dev->stall = 0;
 		dev->ep[UDC_EP0IN_IDX].halted = 0;
 		dev->ep[UDC_EP0OUT_IDX].halted = 0;
-		/* In data not ready */
-		pch_udc_ep_set_nak(&(dev->ep[UDC_EP0IN_IDX]));
 		dev->setup_data = ep->td_stp->request;
 		pch_udc_init_setup_buff(ep->td_stp);
-		pch_udc_clear_dma(dev, DMA_DIR_TX);
+		pch_udc_clear_dma(dev, DMA_DIR_RX);
 		pch_udc_ep_fifo_flush(&(dev->ep[UDC_EP0IN_IDX]),
 				      dev->ep[UDC_EP0IN_IDX].in);
 		if ((dev->setup_data.bRequestType & USB_DIR_IN))
@@ -2122,14 +2136,23 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
 		setup_supported = dev->driver->setup(&dev->gadget,
 						     &dev->setup_data);
 		spin_lock(&dev->lock);
+
+		if (dev->setup_data.bRequestType & USB_DIR_IN) {
+			ep->td_data->status = (ep->td_data->status &
+						~PCH_UDC_BUFF_STS) |
+						PCH_UDC_BS_HST_RDY;
+			pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
+		}
 		/* ep0 in returns data on IN phase */
 		if (setup_supported >= 0 && setup_supported <
 					    UDC_EP0IN_MAX_PKT_SIZE) {
 			pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX]));
 			/* Gadget would have queued a request when
 			 * we called the setup */
-			pch_udc_set_dma(dev, DMA_DIR_RX);
-			pch_udc_ep_clear_nak(ep);
+			if (!(dev->setup_data.bRequestType & USB_DIR_IN)) {
+				pch_udc_set_dma(dev, DMA_DIR_RX);
+				pch_udc_ep_clear_nak(ep);
+			}
 		} else if (setup_supported < 0) {
 			/* if unsupported request, then stall */
 			pch_udc_ep_set_stall(&(dev->ep[UDC_EP0IN_IDX]));
@@ -2142,22 +2165,13 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
 		}
 	} else if ((((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
 		     UDC_EPSTS_OUT_DATA) && !dev->stall) {
-		if (list_empty(&ep->queue)) {
-			dev_err(&dev->pdev->dev, "%s: No request\n", __func__);
-			ep->td_data->status = (ep->td_data->status &
-					       ~PCH_UDC_BUFF_STS) |
-					       PCH_UDC_BS_HST_RDY;
-			pch_udc_set_dma(dev, DMA_DIR_RX);
-		} else {
-			/* control write */
-			/* next function will pickuo an clear the status */
+		pch_udc_clear_dma(dev, DMA_DIR_RX);
+		pch_udc_ep_set_ddptr(ep, 0);
+		if (!list_empty(&ep->queue)) {
 			ep->epsts = stat;
-
-			pch_udc_svc_data_out(dev, 0);
-			/* re-program desc. pointer for possible ZLPs */
-			pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
-			pch_udc_set_dma(dev, DMA_DIR_RX);
+			pch_udc_svc_data_out(dev, PCH_UDC_EP0);
 		}
+		pch_udc_set_dma(dev, DMA_DIR_RX);
 	}
 	pch_udc_ep_set_rrdy(ep);
 }
@@ -2174,7 +2188,7 @@ static void pch_udc_postsvc_epinters(struct pch_udc_dev *dev, int ep_num)
 	struct pch_udc_ep	*ep;
 	struct pch_udc_request *req;
 
-	ep = &dev->ep[2*ep_num];
+	ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
 	if (!list_empty(&ep->queue)) {
 		req = list_entry(ep->queue.next, struct pch_udc_request, queue);
 		pch_udc_enable_ep_interrupts(ep->dev,
@@ -2196,13 +2210,13 @@ static void pch_udc_read_all_epstatus(struct pch_udc_dev *dev, u32 ep_intr)
 	for (i = 0; i < PCH_UDC_USED_EP_NUM; i++) {
 		/* IN */
 		if (ep_intr & (0x1 << i)) {
-			ep = &dev->ep[2*i];
+			ep = &dev->ep[UDC_EPIN_IDX(i)];
 			ep->epsts = pch_udc_read_ep_status(ep);
 			pch_udc_clear_ep_status(ep, ep->epsts);
 		}
 		/* OUT */
 		if (ep_intr & (0x10000 << i)) {
-			ep = &dev->ep[2*i+1];
+			ep = &dev->ep[UDC_EPOUT_IDX(i)];
 			ep->epsts = pch_udc_read_ep_status(ep);
 			pch_udc_clear_ep_status(ep, ep->epsts);
 		}
@@ -2563,9 +2577,6 @@ static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
 	dev->ep[UDC_EP0IN_IDX].ep.maxpacket = UDC_EP0IN_MAX_PKT_SIZE;
 	dev->ep[UDC_EP0OUT_IDX].ep.maxpacket = UDC_EP0OUT_MAX_PKT_SIZE;
 
-	dev->dma_addr = pci_map_single(dev->pdev, dev->ep0out_buf, 256,
-				  PCI_DMA_FROMDEVICE);
-
 	/* remove ep0 in and out from the list.  They have own pointer */
 	list_del_init(&dev->ep[UDC_EP0IN_IDX].ep.ep_list);
 	list_del_init(&dev->ep[UDC_EP0OUT_IDX].ep.ep_list);
@@ -2637,6 +2648,13 @@ static int init_dma_pools(struct pch_udc_dev *dev)
 	dev->ep[UDC_EP0IN_IDX].td_stp_phys = 0;
 	dev->ep[UDC_EP0IN_IDX].td_data = NULL;
 	dev->ep[UDC_EP0IN_IDX].td_data_phys = 0;
+
+	dev->ep0out_buf = kzalloc(UDC_EP0OUT_BUFF_SIZE * 4, GFP_KERNEL);
+	if (!dev->ep0out_buf)
+		return -ENOMEM;
+	dev->dma_addr = dma_map_single(&dev->pdev->dev, dev->ep0out_buf,
+				       UDC_EP0OUT_BUFF_SIZE * 4,
+				       DMA_FROM_DEVICE);
 	return 0;
 }
 
@@ -2700,7 +2718,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
 
-	/* Assues that there are no pending requets with this driver */
+	/* Assures that there are no pending requests with this driver */
+	driver->disconnect(&dev->gadget);
 	driver->unbind(&dev->gadget);
 	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
@@ -2750,6 +2769,11 @@ static void pch_udc_remove(struct pci_dev *pdev)
 		pci_pool_destroy(dev->stp_requests);
 	}
 
+	if (dev->dma_addr)
+		dma_unmap_single(&dev->pdev->dev, dev->dma_addr,
+				 UDC_EP0OUT_BUFF_SIZE * 4, DMA_FROM_DEVICE);
+	kfree(dev->ep0out_buf);
+
 	pch_udc_exit(dev);
 
 	if (dev->irq_registered)
@@ -2792,11 +2816,7 @@ static int pch_udc_resume(struct pci_dev *pdev)
 	int ret;
 
 	pci_set_power_state(pdev, PCI_D0);
-	ret = pci_restore_state(pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "%s: pci_restore_state failed\n", __func__);
-		return ret;
-	}
+	pci_restore_state(pdev);
 	ret = pci_enable_device(pdev);
 	if (ret) {
 		dev_err(&pdev->dev, "%s: pci_enable_device failed\n", __func__);
@@ -2914,6 +2934,11 @@ static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = {
 		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
 		.class_mask = 0xffffffff,
 	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7213_IOH_UDC),
+		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+		.class_mask = 0xffffffff,
+	},
 	{ 0 },
 };
 
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 2fc8636316c5..12ff6cffedc9 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -131,31 +131,31 @@ static struct printer_dev usb_printer_gadget;
  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
 
-static ushort __initdata idVendor;
+static ushort idVendor;
 module_param(idVendor, ushort, S_IRUGO);
 MODULE_PARM_DESC(idVendor, "USB Vendor ID");
 
-static ushort __initdata idProduct;
+static ushort idProduct;
 module_param(idProduct, ushort, S_IRUGO);
 MODULE_PARM_DESC(idProduct, "USB Product ID");
 
-static ushort __initdata bcdDevice;
+static ushort bcdDevice;
 module_param(bcdDevice, ushort, S_IRUGO);
 MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
 
-static char *__initdata iManufacturer;
+static char *iManufacturer;
 module_param(iManufacturer, charp, S_IRUGO);
 MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
 
-static char *__initdata iProduct;
+static char *iProduct;
 module_param(iProduct, charp, S_IRUGO);
 MODULE_PARM_DESC(iProduct, "USB Product string");
 
-static char *__initdata iSerialNum;
+static char *iSerialNum;
 module_param(iSerialNum, charp, S_IRUGO);
 MODULE_PARM_DESC(iSerialNum, "1");
 
-static char *__initdata iPNPstring;
+static char *iPNPstring;
 module_param(iPNPstring, charp, S_IRUGO);
 MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;");
 
@@ -1596,13 +1596,12 @@ cleanup(void)
 	int status;
 
 	mutex_lock(&usb_printer_gadget.lock_printer_io);
-	class_destroy(usb_gadget_class);
-	unregister_chrdev_region(g_printer_devno, 2);
-
 	status = usb_gadget_unregister_driver(&printer_driver);
 	if (status)
 		ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
 
+	unregister_chrdev_region(g_printer_devno, 2);
+	class_destroy(usb_gadget_class);
 	mutex_unlock(&usb_printer_gadget.lock_printer_io);
 }
 module_exit(cleanup);
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 20d43da319ae..015118535f77 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -258,7 +258,7 @@ static int pipe_buffer_setting(struct r8a66597 *r8a66597,
 		break;
 	case R8A66597_BULK:
 		/* isochronous pipes may be used as bulk pipes */
-		if (info->pipe > R8A66597_BASE_PIPENUM_BULK)
+		if (info->pipe >= R8A66597_BASE_PIPENUM_BULK)
 			bufnum = info->pipe - R8A66597_BASE_PIPENUM_BULK;
 		else
 			bufnum = info->pipe - R8A66597_BASE_PIPENUM_ISOC;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 24046c0f5878..0e6afa260ed8 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -151,6 +151,8 @@ config USB_EHCI_MSM
 	  Qualcomm chipsets. Root Hub has inbuilt TT.
 	  This driver depends on OTG driver for PHY initialization,
 	  clock management, powering up VBUS, and power management.
+	  This driver is not supported on boards like trout which
+	  has an external PHY.
 
 config USB_EHCI_HCD_PPC_OF
 	bool "EHCI support for PPC USB controller on OF platform bus"
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 2baf8a849086..a869e3c103d3 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -227,8 +227,8 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
 	 * mark HW unaccessible.  The PM and USB cores make sure that
 	 * the root hub is either suspended or stopped.
 	 */
-	spin_lock_irqsave(&ehci->lock, flags);
 	ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
+	spin_lock_irqsave(&ehci->lock, flags);
 	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
 	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
 
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 86e42892016d..5c761df7fa83 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -52,7 +52,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	struct resource *res;
 	int irq;
 	int retval;
-	unsigned int temp;
 
 	pr_debug("initializing FSL-SOC USB Controller\n");
 
@@ -126,18 +125,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
 		goto err3;
 	}
 
-	/*
-	 * Check if it is MPC5121 SoC, otherwise set pdata->have_sysif_regs
-	 * flag for 83xx or 8536 system interface registers.
-	 */
-	if (pdata->big_endian_mmio)
-		temp = in_be32(hcd->regs + FSL_SOC_USB_ID);
-	else
-		temp = in_le32(hcd->regs + FSL_SOC_USB_ID);
-
-	if ((temp & ID_MSK) != (~((temp & NID_MSK) >> 8) & ID_MSK))
-		pdata->have_sysif_regs = 1;
-
 	/* Enable USB controller, 83xx or 8536 */
 	if (pdata->have_sysif_regs)
 		setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index 2c8353795226..3fabed33d940 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -19,9 +19,6 @@
 #define _EHCI_FSL_H
 
 /* offsets for the non-ehci registers in the FSL SOC USB controller */
-#define FSL_SOC_USB_ID		0x0
-#define ID_MSK			0x3f
-#define NID_MSK			0x3f00
 #define FSL_SOC_USB_ULPIVP	0x170
 #define FSL_SOC_USB_PORTSC1	0x184
 #define PORT_PTS_MSK		(3<<30)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 6fee3cd58efe..74dcf49bd015 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -572,6 +572,8 @@ static int ehci_init(struct usb_hcd *hcd)
 	ehci->iaa_watchdog.function = ehci_iaa_watchdog;
 	ehci->iaa_watchdog.data = (unsigned long) ehci;
 
+	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
+
 	/*
 	 * hw default: 1K periodic list heads, one per frame.
 	 * periodic_size can shrink by USBCMD update if hcc_params allows.
@@ -579,11 +581,20 @@ static int ehci_init(struct usb_hcd *hcd)
 	ehci->periodic_size = DEFAULT_I_TDPS;
 	INIT_LIST_HEAD(&ehci->cached_itd_list);
 	INIT_LIST_HEAD(&ehci->cached_sitd_list);
+
+	if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
+		/* periodic schedule size can be smaller than default */
+		switch (EHCI_TUNE_FLS) {
+		case 0: ehci->periodic_size = 1024; break;
+		case 1: ehci->periodic_size = 512; break;
+		case 2: ehci->periodic_size = 256; break;
+		default:	BUG();
+		}
+	}
 	if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
 		return retval;
 
 	/* controllers may cache some of the periodic schedule ... */
-	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
 	if (HCC_ISOC_CACHE(hcc_params))		// full frame cache
 		ehci->i_thresh = 2 + 8;
 	else					// N microframes cached
@@ -637,12 +648,6 @@ static int ehci_init(struct usb_hcd *hcd)
 		/* periodic schedule size can be smaller than default */
 		temp &= ~(3 << 2);
 		temp |= (EHCI_TUNE_FLS << 2);
-		switch (EHCI_TUNE_FLS) {
-		case 0: ehci->periodic_size = 1024; break;
-		case 1: ehci->periodic_size = 512; break;
-		case 2: ehci->periodic_size = 256; break;
-		default:	BUG();
-		}
 	}
 	if (HCC_LPM(hcc_params)) {
 		/* support link power management EHCI 1.1 addendum */
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 5aa6c4947325..c0b37fedfbc2 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -111,6 +111,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 {
 	int		port;
 	u32		temp;
+	unsigned long	flags;
 
 	/* If remote wakeup is enabled for the root hub but disabled
 	 * for the controller, we must adjust all the port wakeup flags
@@ -120,6 +121,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 	if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
 		return;
 
+	spin_lock_irqsave(&ehci->lock, flags);
+
 	/* clear phy low-power mode before changing wakeup flags */
 	if (ehci->has_hostpc) {
 		port = HCS_N_PORTS(ehci->hcs_params);
@@ -131,7 +134,9 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 			temp = ehci_readl(ehci, hostpc_reg);
 			ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
 		}
+		spin_unlock_irqrestore(&ehci->lock, flags);
 		msleep(5);
+		spin_lock_irqsave(&ehci->lock, flags);
 	}
 
 	port = HCS_N_PORTS(ehci->hcs_params);
@@ -170,6 +175,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 	/* Does the root hub have a port wakeup pending? */
 	if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD))
 		usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
+
+	spin_unlock_irqrestore(&ehci->lock, flags);
 }
 
 static int ehci_bus_suspend (struct usb_hcd *hcd)
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index fa59b26fc5bc..c8e360d7d975 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -21,10 +21,13 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
 #include <linux/slab.h>
 
 #include <mach/mxc_ehci.h>
 
+#include <asm/mach-types.h>
+
 #define ULPI_VIEWPORT_OFFSET	0x170
 
 struct ehci_mxc_priv {
@@ -114,6 +117,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 	struct usb_hcd *hcd;
 	struct resource *res;
 	int irq, ret;
+	unsigned int flags;
 	struct ehci_mxc_priv *priv;
 	struct device *dev = &pdev->dev;
 	struct ehci_hcd *ehci;
@@ -177,8 +181,8 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 		clk_enable(priv->ahbclk);
 	}
 
-	/* "dr" device has its own clock */
-	if (pdev->id == 0) {
+	/* "dr" device has its own clock on i.MX51 */
+	if (cpu_is_mx51() && (pdev->id == 0)) {
 		priv->phy1clk = clk_get(dev, "usb_phy1");
 		if (IS_ERR(priv->phy1clk)) {
 			ret = PTR_ERR(priv->phy1clk);
@@ -240,6 +244,23 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_add;
 
+	if (pdata->otg) {
+		/*
+		 * efikamx and efikasb have some hardware bug which is
+		 * preventing usb to work unless CHRGVBUS is set.
+		 * It's in violation of USB specs
+		 */
+		if (machine_is_mx51_efikamx() || machine_is_mx51_efikasb()) {
+			flags = otg_io_read(pdata->otg, ULPI_OTG_CTRL);
+			flags |= ULPI_OTG_CTRL_CHRGVBUS;
+			ret = otg_io_write(pdata->otg, flags, ULPI_OTG_CTRL);
+			if (ret) {
+				dev_err(dev, "unable to set CHRVBUS\n");
+				goto err_add;
+			}
+		}
+	}
+
 	return 0;
 
 err_add:
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 680f2ef4e59f..f784ceb862a3 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -796,7 +796,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 	hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev,
 			dev_name(&pdev->dev));
 	if (!hcd) {
-		dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret);
+		dev_err(&pdev->dev, "failed to create hcd with err %d\n", ret);
 		ret = -ENOMEM;
 		goto err_create_hcd;
 	}
@@ -864,7 +864,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 
 	ret = omap_start_ehc(omap, hcd);
 	if (ret) {
-		dev_dbg(&pdev->dev, "failed to start ehci\n");
+		dev_err(&pdev->dev, "failed to start ehci with err %d\n", ret);
 		goto err_start;
 	}
 
@@ -879,7 +879,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 
 	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
 	if (ret) {
-		dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
+		dev_err(&pdev->dev, "failed to add hcd with err %d\n", ret);
 		goto err_add_hcd;
 	}
 
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 76179c39c0e3..07bb982e59f6 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -44,28 +44,35 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
 	return 0;
 }
 
-static int ehci_quirk_amd_SB800(struct ehci_hcd *ehci)
+static int ehci_quirk_amd_hudson(struct ehci_hcd *ehci)
 {
 	struct pci_dev *amd_smbus_dev;
 	u8 rev = 0;
 
 	amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
-	if (!amd_smbus_dev)
-		return 0;
-
-	pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
-	if (rev < 0x40) {
-		pci_dev_put(amd_smbus_dev);
-		amd_smbus_dev = NULL;
-		return 0;
+	if (amd_smbus_dev) {
+		pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+		if (rev < 0x40) {
+			pci_dev_put(amd_smbus_dev);
+			amd_smbus_dev = NULL;
+			return 0;
+		}
+	} else {
+		amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x780b, NULL);
+		if (!amd_smbus_dev)
+			return 0;
+		pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+		if (rev < 0x11 || rev > 0x18) {
+			pci_dev_put(amd_smbus_dev);
+			amd_smbus_dev = NULL;
+			return 0;
+		}
 	}
 
 	if (!amd_nb_dev)
 		amd_nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
-	if (!amd_nb_dev)
-		ehci_err(ehci, "QUIRK: unable to get AMD NB device\n");
 
-	ehci_info(ehci, "QUIRK: Enable AMD SB800 L1 fix\n");
+	ehci_info(ehci, "QUIRK: Enable exception for AMD Hudson ASPM\n");
 
 	pci_dev_put(amd_smbus_dev);
 	amd_smbus_dev = NULL;
@@ -131,7 +138,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 	/* cache this readonly data; minimize chip reads */
 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
 
-	if (ehci_quirk_amd_SB800(ehci))
+	if (ehci_quirk_amd_hudson(ehci))
 		ehci->amd_l1_fix = 1;
 
 	retval = ehci_halt(ehci);
@@ -360,8 +367,8 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	 * mark HW unaccessible.  The PM and USB cores make sure that
 	 * the root hub is either suspended or stopped.
 	 */
-	spin_lock_irqsave (&ehci->lock, flags);
 	ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
+	spin_lock_irqsave (&ehci->lock, flags);
 	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
 	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
 
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 574b99ea0700..79a66d622f9c 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -262,19 +262,24 @@ static void fsl_usb2_mpc5121_exit(struct platform_device *pdev)
 	}
 }
 
-struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
+static struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
 	.big_endian_desc = 1,
 	.big_endian_mmio = 1,
 	.es = 1,
+	.have_sysif_regs = 0,
 	.le_setup_buf = 1,
 	.init = fsl_usb2_mpc5121_init,
 	.exit = fsl_usb2_mpc5121_exit,
 };
 #endif /* CONFIG_PPC_MPC512x */
 
+static struct fsl_usb2_platform_data fsl_usb2_mpc8xxx_pd = {
+	.have_sysif_regs = 1,
+};
+
 static const struct of_device_id fsl_usb2_mph_dr_of_match[] = {
-	{ .compatible = "fsl-usb2-mph", },
-	{ .compatible = "fsl-usb2-dr", },
+	{ .compatible = "fsl-usb2-mph", .data = &fsl_usb2_mpc8xxx_pd, },
+	{ .compatible = "fsl-usb2-dr", .data = &fsl_usb2_mpc8xxx_pd, },
 #ifdef CONFIG_PPC_MPC512x
 	{ .compatible = "fsl,mpc5121-usb2-dr", .data = &fsl_usb2_mpc5121_pd, },
 #endif
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 990f06b89eaa..2e9602a10e9b 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -861,6 +861,7 @@ static int sl811h_urb_enqueue(
 			DBG("dev %d ep%d maxpacket %d\n",
 				udev->devnum, epnum, ep->maxpacket);
 			retval = -EINVAL;
+			kfree(ep);
 			goto fail;
 		}
 
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index df558f6f84e3..3e8211c1ce5a 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -308,11 +308,8 @@ static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
 /* Ring the host controller doorbell after placing a command on the ring */
 void xhci_ring_cmd_db(struct xhci_hcd *xhci)
 {
-	u32 temp;
-
 	xhci_dbg(xhci, "// Ding dong!\n");
-	temp = xhci_readl(xhci, &xhci->dba->doorbell[0]) & DB_MASK;
-	xhci_writel(xhci, temp | DB_TARGET_HOST, &xhci->dba->doorbell[0]);
+	xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]);
 	/* Flush PCI posted writes */
 	xhci_readl(xhci, &xhci->dba->doorbell[0]);
 }
@@ -322,26 +319,24 @@ void xhci_ring_ep_doorbell(struct xhci_hcd *xhci,
 		unsigned int ep_index,
 		unsigned int stream_id)
 {
-	struct xhci_virt_ep *ep;
-	unsigned int ep_state;
-	u32 field;
 	__u32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
+	struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
+	unsigned int ep_state = ep->ep_state;
 
-	ep = &xhci->devs[slot_id]->eps[ep_index];
-	ep_state = ep->ep_state;
 	/* Don't ring the doorbell for this endpoint if there are pending
-	 * cancellations because the we don't want to interrupt processing.
+	 * cancellations because we don't want to interrupt processing.
 	 * We don't want to restart any stream rings if there's a set dequeue
 	 * pointer command pending because the device can choose to start any
 	 * stream once the endpoint is on the HW schedule.
 	 * FIXME - check all the stream rings for pending cancellations.
 	 */
-	if (!(ep_state & EP_HALT_PENDING) && !(ep_state & SET_DEQ_PENDING)
-			&& !(ep_state & EP_HALTED)) {
-		field = xhci_readl(xhci, db_addr) & DB_MASK;
-		field |= EPI_TO_DB(ep_index) | STREAM_ID_TO_DB(stream_id);
-		xhci_writel(xhci, field, db_addr);
-	}
+	if ((ep_state & EP_HALT_PENDING) || (ep_state & SET_DEQ_PENDING) ||
+	    (ep_state & EP_HALTED))
+		return;
+	xhci_writel(xhci, DB_VALUE(ep_index, stream_id), db_addr);
+	/* The CPU has better things to do at this point than wait for a
+	 * write-posting flush.  It'll get there soon enough.
+	 */
 }
 
 /* Ring the doorbell for any rings with pending URBs */
@@ -1188,7 +1183,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 
 	addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS * (port_id - 1);
 	temp = xhci_readl(xhci, addr);
-	if ((temp & PORT_CONNECT) && (hcd->state == HC_STATE_SUSPENDED)) {
+	if (hcd->state == HC_STATE_SUSPENDED) {
 		xhci_dbg(xhci, "resume root hub\n");
 		usb_hcd_resume_root_hub(hcd);
 	}
@@ -1710,8 +1705,7 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		/* Others already handled above */
 		break;
 	}
-	dev_dbg(&td->urb->dev->dev,
-			"ep %#x - asked for %d bytes, "
+	xhci_dbg(xhci, "ep %#x - asked for %d bytes, "
 			"%d bytes untransferred\n",
 			td->urb->ep->desc.bEndpointAddress,
 			td->urb->transfer_buffer_length,
@@ -2389,7 +2383,8 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
 	}
 	xhci_dbg(xhci, "\n");
 	if (!in_interrupt())
-		dev_dbg(&urb->dev->dev, "ep %#x - urb len = %d, sglist used, num_trbs = %d\n",
+		xhci_dbg(xhci, "ep %#x - urb len = %d, sglist used, "
+				"num_trbs = %d\n",
 				urb->ep->desc.bEndpointAddress,
 				urb->transfer_buffer_length,
 				num_trbs);
@@ -2414,14 +2409,17 @@ static void check_trb_math(struct urb *urb, int num_trbs, int running_total)
 
 static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
 		unsigned int ep_index, unsigned int stream_id, int start_cycle,
-		struct xhci_generic_trb *start_trb, struct xhci_td *td)
+		struct xhci_generic_trb *start_trb)
 {
 	/*
 	 * Pass all the TRBs to the hardware at once and make sure this write
 	 * isn't reordered.
 	 */
 	wmb();
-	start_trb->field[3] |= start_cycle;
+	if (start_cycle)
+		start_trb->field[3] |= start_cycle;
+	else
+		start_trb->field[3] &= ~0x1;
 	xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
 }
 
@@ -2449,7 +2447,7 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	 * to set the polling interval (once the API is added).
 	 */
 	if (xhci_interval != ep_interval) {
-		if (!printk_ratelimit())
+		if (printk_ratelimit())
 			dev_dbg(&urb->dev->dev, "Driver uses different interval"
 					" (%d microframe%s) than xHCI "
 					"(%d microframe%s)\n",
@@ -2551,9 +2549,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		u32 remainder = 0;
 
 		/* Don't change the cycle bit of the first TRB until later */
-		if (first_trb)
+		if (first_trb) {
 			first_trb = false;
-		else
+			if (start_cycle == 0)
+				field |= 0x1;
+		} else
 			field |= ep_ring->cycle_state;
 
 		/* Chain all the TRBs together; clear the chain bit in the last
@@ -2625,7 +2625,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
 	check_trb_math(urb, num_trbs, running_total);
 	giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
-			start_cycle, start_trb, td);
+			start_cycle, start_trb);
 	return 0;
 }
 
@@ -2671,7 +2671,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	/* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
 
 	if (!in_interrupt())
-		dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d), addr = %#llx, num_trbs = %d\n",
+		xhci_dbg(xhci, "ep %#x - urb len = %#x (%d), "
+				"addr = %#llx, num_trbs = %d\n",
 				urb->ep->desc.bEndpointAddress,
 				urb->transfer_buffer_length,
 				urb->transfer_buffer_length,
@@ -2711,9 +2712,11 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		field = 0;
 
 		/* Don't change the cycle bit of the first TRB until later */
-		if (first_trb)
+		if (first_trb) {
 			first_trb = false;
-		else
+			if (start_cycle == 0)
+				field |= 0x1;
+		} else
 			field |= ep_ring->cycle_state;
 
 		/* Chain all the TRBs together; clear the chain bit in the last
@@ -2757,7 +2760,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
 	check_trb_math(urb, num_trbs, running_total);
 	giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
-			start_cycle, start_trb, td);
+			start_cycle, start_trb);
 	return 0;
 }
 
@@ -2818,13 +2821,17 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	/* Queue setup TRB - see section 6.4.1.2.1 */
 	/* FIXME better way to translate setup_packet into two u32 fields? */
 	setup = (struct usb_ctrlrequest *) urb->setup_packet;
+	field = 0;
+	field |= TRB_IDT | TRB_TYPE(TRB_SETUP);
+	if (start_cycle == 0)
+		field |= 0x1;
 	queue_trb(xhci, ep_ring, false, true,
 			/* FIXME endianness is probably going to bite my ass here. */
 			setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16,
 			setup->wIndex | setup->wLength << 16,
 			TRB_LEN(8) | TRB_INTR_TARGET(0),
 			/* Immediate data in pointer */
-			TRB_IDT | TRB_TYPE(TRB_SETUP));
+			field);
 
 	/* If there's data, queue data TRBs */
 	field = 0;
@@ -2859,7 +2866,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 			field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
 
 	giveback_first_trb(xhci, slot_id, ep_index, 0,
-			start_cycle, start_trb, td);
+			start_cycle, start_trb);
 	return 0;
 }
 
@@ -2900,6 +2907,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	int running_total, trb_buff_len, td_len, td_remain_len, ret;
 	u64 start_addr, addr;
 	int i, j;
+	bool more_trbs_coming;
 
 	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
 
@@ -2910,7 +2918,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	}
 
 	if (!in_interrupt())
-		dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d),"
+		xhci_dbg(xhci, "ep %#x - urb len = %#x (%d),"
 				" addr = %#llx, num_tds = %d\n",
 				urb->ep->desc.bEndpointAddress,
 				urb->transfer_buffer_length,
@@ -2950,7 +2958,10 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 				field |= TRB_TYPE(TRB_ISOC);
 				/* Assume URB_ISO_ASAP is set */
 				field |= TRB_SIA;
-				if (i > 0)
+				if (i == 0) {
+					if (start_cycle == 0)
+						field |= 0x1;
+				} else
 					field |= ep_ring->cycle_state;
 				first_trb = false;
 			} else {
@@ -2965,9 +2976,11 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 			 */
 			if (j < trbs_per_td - 1) {
 				field |= TRB_CHAIN;
+				more_trbs_coming = true;
 			} else {
 				td->last_trb = ep_ring->enqueue;
 				field |= TRB_IOC;
+				more_trbs_coming = false;
 			}
 
 			/* Calculate TRB length */
@@ -2980,7 +2993,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 			length_field = TRB_LEN(trb_buff_len) |
 				remainder |
 				TRB_INTR_TARGET(0);
-			queue_trb(xhci, ep_ring, false, false,
+			queue_trb(xhci, ep_ring, false, more_trbs_coming,
 				lower_32_bits(addr),
 				upper_32_bits(addr),
 				length_field,
@@ -3003,10 +3016,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		}
 	}
 
-	wmb();
-	start_trb->field[3] |= start_cycle;
-
-	xhci_ring_ep_doorbell(xhci, slot_id, ep_index, urb->stream_id);
+	giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
+			start_cycle, start_trb);
 	return 0;
 }
 
@@ -3064,7 +3075,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
 	 * to set the polling interval (once the API is added).
 	 */
 	if (xhci_interval != ep_interval) {
-		if (!printk_ratelimit())
+		if (printk_ratelimit())
 			dev_dbg(&urb->dev->dev, "Driver uses different interval"
 					" (%d microframe%s) than xHCI "
 					"(%d microframe%s)\n",
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 45e4a3108cc3..34cf4e165877 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -226,7 +226,8 @@ static int xhci_setup_msi(struct xhci_hcd *xhci)
 static int xhci_setup_msix(struct xhci_hcd *xhci)
 {
 	int i, ret = 0;
-	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
 
 	/*
 	 * calculate number of msi-x vectors supported.
@@ -265,6 +266,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci)
 			goto disable_msix;
 	}
 
+	hcd->msix_enabled = 1;
 	return ret;
 
 disable_msix:
@@ -280,7 +282,8 @@ free_entries:
 /* Free any IRQs and disable MSI-X */
 static void xhci_cleanup_msix(struct xhci_hcd *xhci)
 {
-	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
 
 	xhci_free_irq(xhci);
 
@@ -292,6 +295,7 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci)
 		pci_disable_msi(pdev);
 	}
 
+	hcd->msix_enabled = 0;
 	return;
 }
 
@@ -508,9 +512,10 @@ void xhci_stop(struct usb_hcd *hcd)
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
 	xhci_reset(xhci);
-	xhci_cleanup_msix(xhci);
 	spin_unlock_irq(&xhci->lock);
 
+	xhci_cleanup_msix(xhci);
+
 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
 	/* Tell the event ring poll function not to reschedule */
 	xhci->zombie = 1;
@@ -544,9 +549,10 @@ void xhci_shutdown(struct usb_hcd *hcd)
 
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
-	xhci_cleanup_msix(xhci);
 	spin_unlock_irq(&xhci->lock);
 
+	xhci_cleanup_msix(xhci);
+
 	xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n",
 		    xhci_readl(xhci, &xhci->op_regs->status));
 }
@@ -647,6 +653,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	int			rc = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	u32			command;
+	int			i;
 
 	spin_lock_irq(&xhci->lock);
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
@@ -677,10 +684,15 @@ int xhci_suspend(struct xhci_hcd *xhci)
 		spin_unlock_irq(&xhci->lock);
 		return -ETIMEDOUT;
 	}
-	/* step 5: remove core well power */
-	xhci_cleanup_msix(xhci);
 	spin_unlock_irq(&xhci->lock);
 
+	/* step 5: remove core well power */
+	/* synchronize irq when using MSI-X */
+	if (xhci->msix_entries) {
+		for (i = 0; i < xhci->msix_count; i++)
+			synchronize_irq(xhci->msix_entries[i].vector);
+	}
+
 	return rc;
 }
 
@@ -694,7 +706,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 {
 	u32			command, temp = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
-	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
 	int	old_state, retval;
 
 	old_state = hcd->state;
@@ -729,9 +740,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		xhci_dbg(xhci, "Stop HCD\n");
 		xhci_halt(xhci);
 		xhci_reset(xhci);
-		if (hibernated)
-			xhci_cleanup_msix(xhci);
 		spin_unlock_irq(&xhci->lock);
+		xhci_cleanup_msix(xhci);
 
 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
 		/* Tell the event ring poll function not to reschedule */
@@ -765,30 +775,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		return retval;
 	}
 
-	spin_unlock_irq(&xhci->lock);
-	/* Re-setup MSI-X */
-	if (hcd->irq)
-		free_irq(hcd->irq, hcd);
-	hcd->irq = -1;
-
-	retval = xhci_setup_msix(xhci);
-	if (retval)
-		/* fall back to msi*/
-		retval = xhci_setup_msi(xhci);
-
-	if (retval) {
-		/* fall back to legacy interrupt*/
-		retval = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
-					hcd->irq_descr, hcd);
-		if (retval) {
-			xhci_err(xhci, "request interrupt %d failed\n",
-					pdev->irq);
-			return retval;
-		}
-		hcd->irq = pdev->irq;
-	}
-
-	spin_lock_irq(&xhci->lock);
 	/* step 4: set Run/Stop bit */
 	command = xhci_readl(xhci, &xhci->op_regs->command);
 	command |= CMD_RUN;
@@ -2445,8 +2431,12 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
 		xhci_err(xhci, "Error while assigning device slot ID\n");
 		return 0;
 	}
-	/* xhci_alloc_virt_device() does not touch rings; no need to lock */
-	if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_KERNEL)) {
+	/* xhci_alloc_virt_device() does not touch rings; no need to lock.
+	 * Use GFP_NOIO, since this function can be called from
+	 * xhci_discover_or_reset_device(), which may be called as part of
+	 * mass storage driver error handling.
+	 */
+	if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) {
 		/* Disable slot, if we can do it without mem alloc */
 		xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
 		spin_lock_irqsave(&xhci->lock, flags);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 170c367112d2..7f236fd22015 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -436,22 +436,18 @@ struct xhci_run_regs {
 /**
  * struct doorbell_array
  *
+ * Bits  0 -  7: Endpoint target
+ * Bits  8 - 15: RsvdZ
+ * Bits 16 - 31: Stream ID
+ *
  * Section 5.6
  */
 struct xhci_doorbell_array {
 	u32	doorbell[256];
 };
 
-#define	DB_TARGET_MASK		0xFFFFFF00
-#define	DB_STREAM_ID_MASK	0x0000FFFF
-#define	DB_TARGET_HOST		0x0
-#define	DB_STREAM_ID_HOST	0x0
-#define	DB_MASK			(0xff << 8)
-
-/* Endpoint Target - bits 0:7 */
-#define EPI_TO_DB(p)		(((p) + 1) & 0xff)
-#define STREAM_ID_TO_DB(p)	(((p) & 0xffff) << 16)
-
+#define DB_VALUE(ep, stream)	((((ep) + 1) & 0xff) | ((stream) << 16))
+#define DB_VALUE_HOST		0x00000000
 
 /**
  * struct xhci_protocol_caps
diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
index 1732d9bc097e..1616ad1793a4 100644
--- a/drivers/usb/misc/usbled.c
+++ b/drivers/usb/misc/usbled.c
@@ -45,7 +45,7 @@ struct usb_led {
 
 static void change_color(struct usb_led *led)
 {
-	int retval;
+	int retval = 0;
 	unsigned char *buffer;
 
 	buffer = kmalloc(8, GFP_KERNEL);
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index 4ff21587ab03..f7a205738032 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -776,7 +776,6 @@ static const struct usb_device_id uss720_table[] = {
 	{ USB_DEVICE(0x0557, 0x2001) },
 	{ USB_DEVICE(0x0729, 0x1284) },
 	{ USB_DEVICE(0x1293, 0x0002) },
-	{ USB_DEVICE(0x1293, 0x0002) },
 	{ USB_DEVICE(0x050d, 0x0002) },
 	{ }						/* Terminating entry */
 };
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index eeba228eb2af..9d49d1cd7ce2 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -404,6 +404,7 @@ static int bfin_musb_init(struct musb *musb)
 		musb->xceiv->set_power = bfin_musb_set_power;
 
 	musb->isr = blackfin_interrupt;
+	musb->double_buffer_not_ok = true;
 
 	return 0;
 }
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 07cf394e491b..54a8bd1047d6 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -128,12 +128,7 @@ MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
 
 static inline struct musb *dev_to_musb(struct device *dev)
 {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-	/* usbcore insists dev->driver_data is a "struct hcd *" */
-	return hcd_to_musb(dev_get_drvdata(dev));
-#else
 	return dev_get_drvdata(dev);
-#endif
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1876,10 +1871,9 @@ allocate_instance(struct device *dev,
 	musb = kzalloc(sizeof *musb, GFP_KERNEL);
 	if (!musb)
 		return NULL;
-	dev_set_drvdata(dev, musb);
 
 #endif
-
+	dev_set_drvdata(dev, musb);
 	musb->mregs = mbase;
 	musb->ctrl_base = mbase;
 	musb->nIrq = -ENODEV;
@@ -2191,7 +2185,7 @@ static int __init musb_probe(struct platform_device *pdev)
 	void __iomem	*base;
 
 	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!iomem || irq == 0)
+	if (!iomem || irq <= 0)
 		return -ENODEV;
 
 	base = ioremap(iomem->start, resource_size(iomem));
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index d0c236f8e191..d74a8113ae74 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -488,6 +488,18 @@ struct musb {
 	unsigned		set_address:1;
 	unsigned		test_mode:1;
 	unsigned		softconnect:1;
+	/*
+	 * FIXME: Remove this flag.
+	 *
+	 * This is only added to allow Blackfin to work
+	 * with current driver. For some unknown reason
+	 * Blackfin doesn't work with double buffering
+	 * and that's enabled by default.
+	 *
+	 * We added this flag to forcefully disable double
+	 * buffering until we get it working.
+	 */
+	unsigned                double_buffer_not_ok:1 __deprecated;
 
 	u8			address;
 	u8			test_mode_nr;
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index 916065ba9e70..3a97c4e2d4f5 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h
@@ -169,6 +169,9 @@ struct dma_controller {
 							dma_addr_t dma_addr,
 							u32 length);
 	int			(*channel_abort)(struct dma_channel *);
+	int			(*is_compatible)(struct dma_channel *channel,
+							u16 maxpacket,
+							void *buf, u32 length);
 };
 
 /* called after channel_program(), may indicate a fault */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index ed58c6c8f15c..2fe304611dcf 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -92,11 +92,33 @@
 
 /* ----------------------------------------------------------------------- */
 
+#define is_buffer_mapped(req) (is_dma_capable() && \
+					(req->map_state != UN_MAPPED))
+
 /* Maps the buffer to dma  */
 
 static inline void map_dma_buffer(struct musb_request *request,
-				struct musb *musb)
+			struct musb *musb, struct musb_ep *musb_ep)
 {
+	int compatible = true;
+	struct dma_controller *dma = musb->dma_controller;
+
+	request->map_state = UN_MAPPED;
+
+	if (!is_dma_capable() || !musb_ep->dma)
+		return;
+
+	/* Check if DMA engine can handle this request.
+	 * DMA code must reject the USB request explicitly.
+	 * Default behaviour is to map the request.
+	 */
+	if (dma->is_compatible)
+		compatible = dma->is_compatible(musb_ep->dma,
+				musb_ep->packet_sz, request->request.buf,
+				request->request.length);
+	if (!compatible)
+		return;
+
 	if (request->request.dma == DMA_ADDR_INVALID) {
 		request->request.dma = dma_map_single(
 				musb->controller,
@@ -105,7 +127,7 @@ static inline void map_dma_buffer(struct musb_request *request,
 				request->tx
 					? DMA_TO_DEVICE
 					: DMA_FROM_DEVICE);
-		request->mapped = 1;
+		request->map_state = MUSB_MAPPED;
 	} else {
 		dma_sync_single_for_device(musb->controller,
 			request->request.dma,
@@ -113,7 +135,7 @@ static inline void map_dma_buffer(struct musb_request *request,
 			request->tx
 				? DMA_TO_DEVICE
 				: DMA_FROM_DEVICE);
-		request->mapped = 0;
+		request->map_state = PRE_MAPPED;
 	}
 }
 
@@ -121,11 +143,14 @@ static inline void map_dma_buffer(struct musb_request *request,
 static inline void unmap_dma_buffer(struct musb_request *request,
 				struct musb *musb)
 {
+	if (!is_buffer_mapped(request))
+		return;
+
 	if (request->request.dma == DMA_ADDR_INVALID) {
 		DBG(20, "not unmapping a never mapped buffer\n");
 		return;
 	}
-	if (request->mapped) {
+	if (request->map_state == MUSB_MAPPED) {
 		dma_unmap_single(musb->controller,
 			request->request.dma,
 			request->request.length,
@@ -133,16 +158,15 @@ static inline void unmap_dma_buffer(struct musb_request *request,
 				? DMA_TO_DEVICE
 				: DMA_FROM_DEVICE);
 		request->request.dma = DMA_ADDR_INVALID;
-		request->mapped = 0;
-	} else {
+	} else { /* PRE_MAPPED */
 		dma_sync_single_for_cpu(musb->controller,
 			request->request.dma,
 			request->request.length,
 			request->tx
 				? DMA_TO_DEVICE
 				: DMA_FROM_DEVICE);
-
 	}
+	request->map_state = UN_MAPPED;
 }
 
 /*
@@ -172,8 +196,7 @@ __acquires(ep->musb->lock)
 
 	ep->busy = 1;
 	spin_unlock(&musb->lock);
-	if (is_dma_capable() && ep->dma)
-		unmap_dma_buffer(req, musb);
+	unmap_dma_buffer(req, musb);
 	if (request->status == 0)
 		DBG(5, "%s done request %p,  %d/%d\n",
 				ep->end_point.name, request,
@@ -335,7 +358,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
 			csr);
 
 #ifndef	CONFIG_MUSB_PIO_ONLY
-	if (is_dma_capable() && musb_ep->dma) {
+	if (is_buffer_mapped(req)) {
 		struct dma_controller	*c = musb->dma_controller;
 		size_t request_size;
 
@@ -436,8 +459,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
 		 * Unmap the dma buffer back to cpu if dma channel
 		 * programming fails
 		 */
-		if (is_dma_capable() && musb_ep->dma)
-			unmap_dma_buffer(req, musb);
+		unmap_dma_buffer(req, musb);
 
 		musb_write_fifo(musb_ep->hw_ep, fifo_count,
 				(u8 *) (request->buf + request->actual));
@@ -627,7 +649,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 		return;
 	}
 
-	if (is_cppi_enabled() && musb_ep->dma) {
+	if (is_cppi_enabled() && is_buffer_mapped(req)) {
 		struct dma_controller	*c = musb->dma_controller;
 		struct dma_channel	*channel = musb_ep->dma;
 
@@ -658,7 +680,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 		len = musb_readw(epio, MUSB_RXCOUNT);
 		if (request->actual < request->length) {
 #ifdef CONFIG_USB_INVENTRA_DMA
-			if (is_dma_capable() && musb_ep->dma) {
+			if (is_buffer_mapped(req)) {
 				struct dma_controller	*c;
 				struct dma_channel	*channel;
 				int			use_dma = 0;
@@ -742,7 +764,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 			fifo_count = min_t(unsigned, len, fifo_count);
 
 #ifdef	CONFIG_USB_TUSB_OMAP_DMA
-			if (tusb_dma_omap() && musb_ep->dma) {
+			if (tusb_dma_omap() && is_buffer_mapped(req)) {
 				struct dma_controller *c = musb->dma_controller;
 				struct dma_channel *channel = musb_ep->dma;
 				u32 dma_addr = request->dma + request->actual;
@@ -762,7 +784,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 			 * programming fails. This buffer is mapped if the
 			 * channel allocation is successful
 			 */
-			 if (is_dma_capable() && musb_ep->dma) {
+			 if (is_buffer_mapped(req)) {
 				unmap_dma_buffer(req, musb);
 
 				/*
@@ -989,7 +1011,11 @@ static int musb_gadget_enable(struct usb_ep *ep,
 		/* Set TXMAXP with the FIFO size of the endpoint
 		 * to disable double buffering mode.
 		 */
-		musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
+		if (musb->double_buffer_not_ok)
+			musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
+		else
+			musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
+					| (musb_ep->hb_mult << 11));
 
 		csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
 		if (musb_readw(regs, MUSB_TXCSR)
@@ -1025,7 +1051,11 @@ static int musb_gadget_enable(struct usb_ep *ep,
 		/* Set RXMAXP with the FIFO size of the endpoint
 		 * to disable double buffering mode.
 		 */
-		musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
+		if (musb->double_buffer_not_ok)
+			musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx);
+		else
+			musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
+					| (musb_ep->hb_mult << 11));
 
 		/* force shared fifo to OUT-only mode */
 		if (hw_ep->is_shared_fifo) {
@@ -1214,10 +1244,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 	request->epnum = musb_ep->current_epnum;
 	request->tx = musb_ep->is_in;
 
-	if (is_dma_capable() && musb_ep->dma)
-		map_dma_buffer(request, musb);
-	else
-		request->mapped = 0;
+	map_dma_buffer(request, musb, musb_ep);
 
 	spin_lock_irqsave(&musb->lock, lockflags);
 
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
index dec8dc008191..a55354fbccf5 100644
--- a/drivers/usb/musb/musb_gadget.h
+++ b/drivers/usb/musb/musb_gadget.h
@@ -35,13 +35,19 @@
 #ifndef __MUSB_GADGET_H
 #define __MUSB_GADGET_H
 
+enum buffer_map_state {
+	UN_MAPPED = 0,
+	PRE_MAPPED,
+	MUSB_MAPPED
+};
+
 struct musb_request {
 	struct usb_request	request;
 	struct musb_ep		*ep;
 	struct musb		*musb;
 	u8 tx;			/* endpoint direction */
 	u8 epnum;
-	u8 mapped;
+	enum buffer_map_state map_state;
 };
 
 static inline struct musb_request *to_musb_request(struct usb_request *req)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 4d2f3f79c425..5eef4a8847db 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -609,7 +609,7 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
 	/* Set RXMAXP with the FIFO size of the endpoint
 	 * to disable double buffer mode.
 	 */
-	if (musb->hwvers < MUSB_HWVERS_2000)
+	if (musb->double_buffer_not_ok)
 		musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx);
 	else
 		musb_writew(ep->regs, MUSB_RXMAXP,
@@ -784,14 +784,13 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 		/* protocol/endpoint/interval/NAKlimit */
 		if (epnum) {
 			musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
-			if (can_bulk_split(musb, qh->type))
+			if (musb->double_buffer_not_ok)
 				musb_writew(epio, MUSB_TXMAXP,
-					packet_sz
-					| ((hw_ep->max_packet_sz_tx /
-						packet_sz) - 1) << 11);
+						hw_ep->max_packet_sz_tx);
 			else
 				musb_writew(epio, MUSB_TXMAXP,
-					packet_sz);
+						qh->maxpacket |
+						((qh->hb_mult - 1) << 11));
 			musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg);
 		} else {
 			musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg);
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index f763d62f151c..21056c924c74 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -94,24 +94,33 @@ static inline void musb_write_hsdma_addr(void __iomem *mbase,
 {
 	musb_writew(mbase,
 		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW),
-		((u16)((u32) dma_addr & 0xFFFF)));
+		dma_addr);
 	musb_writew(mbase,
 		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH),
-		((u16)(((u32) dma_addr >> 16) & 0xFFFF)));
+		(dma_addr >> 16));
 }
 
 static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel)
 {
-	return musb_readl(mbase,
+	u32 count = musb_readw(mbase,
 		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH));
+
+	count = count << 16;
+
+	count |= musb_readw(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW));
+
+	return count;
 }
 
 static inline void musb_write_hsdma_count(void __iomem *mbase,
 				u8 bchannel, u32 len)
 {
-	musb_writel(mbase,
+	musb_writew(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),len);
+	musb_writew(mbase,
 		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH),
-		len);
+		(len >> 16));
 }
 
 #endif /* CONFIG_BLACKFIN */
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 9fb875d5f09c..9ffc8237fb4b 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -103,6 +103,8 @@ config USB_MSM_OTG_72K
 	  required after resetting the hardware and power management.
 	  This driver is required even for peripheral only or host only
 	  mode configurations.
+	  This driver is not supported on boards like trout which
+	  has an external PHY.
 
 config AB8500_USB
         tristate "AB8500 USB Transceiver Driver"
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index e70014ab0976..8acf165fe13b 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -132,6 +132,8 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, nop);
 
+	BLOCKING_INIT_NOTIFIER_HEAD(&nop->otg.notifier);
+
 	return 0;
 exit:
 	kfree(nop);
diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c
index 059d9ac0ab5b..770d799d5afb 100644
--- a/drivers/usb/otg/ulpi.c
+++ b/drivers/usb/otg/ulpi.c
@@ -45,7 +45,7 @@ struct ulpi_info {
 /* ULPI hardcoded IDs, used for probing */
 static struct ulpi_info ulpi_ids[] = {
 	ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"),
-	ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB3319"),
+	ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"),
 };
 
 static int ulpi_set_otg_flags(struct otg_transceiver *otg)
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 63f7cc45bcac..7b8815ddf368 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -486,12 +486,22 @@ static void ch341_read_int_callback(struct urb *urb)
 	if (actual_length >= 4) {
 		struct ch341_private *priv = usb_get_serial_port_data(port);
 		unsigned long flags;
+		u8 prev_line_status = priv->line_status;
 
 		spin_lock_irqsave(&priv->lock, flags);
 		priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT;
 		if ((data[1] & CH341_MULT_STAT))
 			priv->multi_status_change = 1;
 		spin_unlock_irqrestore(&priv->lock, flags);
+
+		if ((priv->line_status ^ prev_line_status) & CH341_BIT_DCD) {
+			struct tty_struct *tty = tty_port_tty_get(&port->port);
+			if (tty)
+				usb_serial_handle_dcd_change(port, tty,
+					    priv->line_status & CH341_BIT_DCD);
+			tty_kref_put(tty);
+		}
+
 		wake_up_interruptible(&priv->delta_msr_wait);
 	}
 
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 8d7731dbf478..735ea03157ab 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -49,7 +49,6 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
 static void cp210x_break_ctl(struct tty_struct *, int);
 static int cp210x_startup(struct usb_serial *);
 static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
-static int cp210x_carrier_raised(struct usb_serial_port *p);
 
 static int debug;
 
@@ -87,7 +86,6 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
 	{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
 	{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
-	{ USB_DEVICE(0x10C4, 0x8149) }, /* West Mountain Radio Computerized Battery Analyzer */
 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
 	{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
@@ -110,7 +108,9 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
 	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+	{ USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
 	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
+	{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
 	{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
@@ -165,8 +165,7 @@ static struct usb_serial_driver cp210x_device = {
 	.tiocmget 		= cp210x_tiocmget,
 	.tiocmset		= cp210x_tiocmset,
 	.attach			= cp210x_startup,
-	.dtr_rts		= cp210x_dtr_rts,
-	.carrier_raised		= cp210x_carrier_raised
+	.dtr_rts		= cp210x_dtr_rts
 };
 
 /* Config request types */
@@ -765,15 +764,6 @@ static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static int cp210x_carrier_raised(struct usb_serial_port *p)
-{
-	unsigned int control;
-	cp210x_get_config(p, CP210X_GET_MDMSTS, &control, 1);
-	if (control & CONTROL_DCD)
-		return 1;
-	return 0;
-}
-
 static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index b92070c103cd..666e5a6edd82 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -455,7 +455,6 @@ static int digi_write_room(struct tty_struct *tty);
 static int digi_chars_in_buffer(struct tty_struct *tty);
 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void digi_close(struct usb_serial_port *port);
-static int digi_carrier_raised(struct usb_serial_port *port);
 static void digi_dtr_rts(struct usb_serial_port *port, int on);
 static int digi_startup_device(struct usb_serial *serial);
 static int digi_startup(struct usb_serial *serial);
@@ -511,7 +510,6 @@ static struct usb_serial_driver digi_acceleport_2_device = {
 	.open =				digi_open,
 	.close =			digi_close,
 	.dtr_rts =			digi_dtr_rts,
-	.carrier_raised =		digi_carrier_raised,
 	.write =			digi_write,
 	.write_room =			digi_write_room,
 	.write_bulk_callback = 		digi_write_bulk_callback,
@@ -1339,14 +1337,6 @@ static void digi_dtr_rts(struct usb_serial_port *port, int on)
 	digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1);
 }
 
-static int digi_carrier_raised(struct usb_serial_port *port)
-{
-	struct digi_port *priv = usb_get_serial_port_data(port);
-	if (priv->dp_modem_signals & TIOCM_CD)
-		return 1;
-	return 0;
-}
-
 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int ret;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 71a0f99023bd..5a446710fb79 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -100,6 +100,7 @@ struct ftdi_sio_quirk {
 static int   ftdi_jtag_probe(struct usb_serial *serial);
 static int   ftdi_mtxorb_hack_setup(struct usb_serial *serial);
 static int   ftdi_NDI_device_setup(struct usb_serial *serial);
+static int   ftdi_stmclite_probe(struct usb_serial *serial);
 static void  ftdi_USB_UIRT_setup(struct ftdi_private *priv);
 static void  ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
 
@@ -123,6 +124,10 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 	.port_probe = ftdi_HE_TIRA1_setup,
 };
 
+static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
+	.probe	= ftdi_stmclite_probe,
+};
+
 /*
  * The 8U232AM has the same API as the sio except for:
  * - it can support MUCH higher baudrates; up to:
@@ -616,6 +621,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
 	{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
+	{ USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
 	{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
 	{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
 	{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
@@ -676,7 +682,17 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
-	{ USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) },
+	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
@@ -800,6 +816,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
 	{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -1699,6 +1717,25 @@ static int ftdi_jtag_probe(struct usb_serial *serial)
 }
 
 /*
+ * First and second port on STMCLiteadaptors is reserved for JTAG interface
+ * and the forth port for pio
+ */
+static int ftdi_stmclite_probe(struct usb_serial *serial)
+{
+	struct usb_device *udev = serial->dev;
+	struct usb_interface *interface = serial->interface;
+
+	dbg("%s", __func__);
+
+	if (interface == udev->actconfig->interface[2])
+		return 0;
+
+	dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+
+	return -ENODEV;
+}
+
+/*
  * The Matrix Orbital VK204-25-USB has an invalid IN endpoint.
  * We have to correct it if we want to read from it.
  */
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index bf0867285481..117e8e6f93c6 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -518,6 +518,12 @@
 #define RATOC_PRODUCT_ID_USB60F	0xb020
 
 /*
+ * Acton Research Corp.
+ */
+#define ACTON_VID		0x0647	/* Vendor ID */
+#define ACTON_SPECTRAPRO_PID	0x0100
+
+/*
  * Contec products (http://www.contec.com)
  * Submitted by Daniel Sangorrin
  */
@@ -569,11 +575,23 @@
 #define OCT_US101_PID		0x0421	/* OCT US101 USB to RS-232 */
 
 /*
- * Icom ID-1 digital transceiver
+ * Definitions for Icom Inc. devices
  */
-
-#define ICOM_ID1_VID            0x0C26
-#define ICOM_ID1_PID            0x0004
+#define ICOM_VID		0x0C26 /* Icom vendor ID */
+/* Note: ID-1 is a communications tranceiver for HAM-radio operators */
+#define ICOM_ID_1_PID		0x0004 /* ID-1 USB to RS-232 */
+/* Note: OPC is an Optional cable to connect an Icom Tranceiver */
+#define ICOM_OPC_U_UC_PID	0x0018 /* OPC-478UC, OPC-1122U cloning cable */
+/* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */
+#define ICOM_ID_RP2C1_PID	0x0009 /* ID-RP2C Asset 1 to RS-232 */
+#define ICOM_ID_RP2C2_PID	0x000A /* ID-RP2C Asset 2 to RS-232 */
+#define ICOM_ID_RP2D_PID	0x000B /* ID-RP2D configuration port*/
+#define ICOM_ID_RP2VT_PID	0x000C /* ID-RP2V Transmit config port */
+#define ICOM_ID_RP2VR_PID	0x000D /* ID-RP2V Receive config port */
+#define ICOM_ID_RP4KVT_PID	0x0010 /* ID-RP4000V Transmit config port */
+#define ICOM_ID_RP4KVR_PID	0x0011 /* ID-RP4000V Receive config port */
+#define ICOM_ID_RP2KVT_PID	0x0012 /* ID-RP2000V Transmit config port */
+#define ICOM_ID_RP2KVR_PID	0x0013 /* ID-RP2000V Receive config port */
 
 /*
  * GN Otometrics (http://www.otometrics.com)
@@ -1022,6 +1040,12 @@
 #define WHT_PID			0x0004 /* Wireless Handheld Terminal */
 
 /*
+ * STMicroelectonics
+ */
+#define ST_VID			0x0483
+#define ST_STMCLT1030_PID	0x3747 /* ST Micro Connect Lite STMCLT1030 */
+
+/*
  * Papouch products (http://www.papouch.com/)
  * Submitted by Folkert van Heusden
  */
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index e6833e216fc9..e4db5ad2bc55 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -479,6 +479,26 @@ int usb_serial_handle_break(struct usb_serial_port *port)
 }
 EXPORT_SYMBOL_GPL(usb_serial_handle_break);
 
+/**
+ *	usb_serial_handle_dcd_change - handle a change of carrier detect state
+ *	@port: usb_serial_port structure for the open port
+ *	@tty: tty_struct structure for the port
+ *	@status: new carrier detect status, nonzero if active
+ */
+void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
+				struct tty_struct *tty, unsigned int status)
+{
+	struct tty_port *port = &usb_port->port;
+
+	dbg("%s - port %d, status %d", __func__, usb_port->number, status);
+
+	if (status)
+		wake_up_interruptible(&port->open_wait);
+	else if (tty && !C_CLOCAL(tty))
+		tty_hangup(tty);
+}
+EXPORT_SYMBOL_GPL(usb_serial_handle_dcd_change);
+
 int usb_serial_generic_resume(struct usb_serial *serial)
 {
 	struct usb_serial_port *port;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index cd769ef24f8a..3b246d93cf22 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2889,8 +2889,8 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
 
 	dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build);
 
-	edge_serial->product_info.FirmwareMajorVersion = fw->data[0];
-	edge_serial->product_info.FirmwareMinorVersion = fw->data[1];
+	edge_serial->product_info.FirmwareMajorVersion = rec->data[0];
+	edge_serial->product_info.FirmwareMinorVersion = rec->data[1];
 	edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build);
 
 	for (rec = ihex_next_binrec(rec); rec;
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index 6ab2a3f97fe8..178b22eb32b1 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -199,6 +199,7 @@ static struct usb_serial_driver epic_device = {
 		.name		= "epic",
 	},
 	.description		= "EPiC device",
+	.usb_driver		= &io_driver,
 	.id_table		= Epic_port_id_table,
 	.num_ports		= 1,
 	.open			= edge_open,
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 12ed594f5f80..99b97c04896f 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1275,6 +1275,7 @@ static struct usb_serial_driver iuu_device = {
 		   .name = "iuu_phoenix",
 		   },
 	.id_table = id_table,
+	.usb_driver = &iuu_driver,
 	.num_ports = 1,
 	.bulk_in_size = 512,
 	.bulk_out_size = 512,
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 2d8baf6ac472..ce134dc28ddf 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -546,6 +546,7 @@ static struct usb_serial_driver keyspan_pre_device = {
 		.name		= "keyspan_no_firm",
 	},
 	.description		= "Keyspan - (without firmware)",
+	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_pre_ids,
 	.num_ports		= 1,
 	.attach			= keyspan_fake_startup,
@@ -557,6 +558,7 @@ static struct usb_serial_driver keyspan_1port_device = {
 		.name		= "keyspan_1",
 	},
 	.description		= "Keyspan 1 port adapter",
+	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_1port_ids,
 	.num_ports		= 1,
 	.open			= keyspan_open,
@@ -579,6 +581,7 @@ static struct usb_serial_driver keyspan_2port_device = {
 		.name		= "keyspan_2",
 	},
 	.description		= "Keyspan 2 port adapter",
+	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_2port_ids,
 	.num_ports		= 2,
 	.open			= keyspan_open,
@@ -601,6 +604,7 @@ static struct usb_serial_driver keyspan_4port_device = {
 		.name		= "keyspan_4",
 	},
 	.description		= "Keyspan 4 port adapter",
+	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_4port_ids,
 	.num_ports		= 4,
 	.open			= keyspan_open,
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index a10dd5676ccc..554a8693a463 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -679,22 +679,6 @@ static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
 	}
 }
 
-static int keyspan_pda_carrier_raised(struct usb_serial_port *port)
-{
-	struct usb_serial *serial = port->serial;
-	unsigned char modembits;
-
-	/* If we can read the modem status and the DCD is low then
-	   carrier is not raised yet */
-	if (keyspan_pda_get_modem_info(serial, &modembits) >= 0) {
-		if (!(modembits & (1>>6)))
-			return 0;
-	}
-	/* Carrier raised, or we failed (eg disconnected) so
-	   progress accordingly */
-	return 1;
-}
-
 
 static int keyspan_pda_open(struct tty_struct *tty,
 					struct usb_serial_port *port)
@@ -881,7 +865,6 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.id_table =		id_table_std,
 	.num_ports =		1,
 	.dtr_rts =		keyspan_pda_dtr_rts,
-	.carrier_raised	=	keyspan_pda_carrier_raised,
 	.open =			keyspan_pda_open,
 	.close =		keyspan_pda_close,
 	.write =		keyspan_pda_write,
diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
index cf1718394e18..653465f61d4a 100644
--- a/drivers/usb/serial/moto_modem.c
+++ b/drivers/usb/serial/moto_modem.c
@@ -44,6 +44,7 @@ static struct usb_serial_driver moto_device = {
 		.name =		"moto-modem",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&moto_driver,
 	.num_ports =		1,
 };
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 748778288d94..5f46838dfee5 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -382,7 +382,16 @@ static void option_instat_callback(struct urb *urb);
 #define HAIER_VENDOR_ID				0x201e
 #define HAIER_PRODUCT_CE100			0x2009
 
-#define CINTERION_VENDOR_ID			0x0681
+/* Cinterion (formerly Siemens) products */
+#define SIEMENS_VENDOR_ID				0x0681
+#define CINTERION_VENDOR_ID				0x1e2d
+#define CINTERION_PRODUCT_HC25_MDM		0x0047
+#define CINTERION_PRODUCT_HC25_MDMNET	0x0040
+#define CINTERION_PRODUCT_HC28_MDM		0x004C
+#define CINTERION_PRODUCT_HC28_MDMNET	0x004A /* same for HC28J */
+#define CINTERION_PRODUCT_EU3_E			0x0051
+#define CINTERION_PRODUCT_EU3_P			0x0052
+#define CINTERION_PRODUCT_PH8			0x0053
 
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
@@ -944,7 +953,17 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F) },
 	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011)},
 	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)},
-	{ USB_DEVICE(CINTERION_VENDOR_ID, 0x0047) },
+	/* Cinterion */
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, 
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
+
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 5be866bb7a41..73613205be7a 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -157,6 +157,7 @@ static struct usb_serial_driver oti6858_device = {
 		.name =		"oti6858",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&oti6858_driver,
 	.num_ports =		1,
 	.open =			oti6858_open,
 	.close =		oti6858_close,
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 8ae4c6cbc38a..08c9181b8e48 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -50,6 +50,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
@@ -677,9 +678,11 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
 {
 
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	struct tty_struct *tty;
 	unsigned long flags;
 	u8 status_idx = UART_STATE;
 	u8 length = UART_STATE + 1;
+	u8 prev_line_status;
 	u16 idv, idp;
 
 	idv = le16_to_cpu(port->serial->dev->descriptor.idVendor);
@@ -701,11 +704,20 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
 
 	/* Save off the uart status for others to look at */
 	spin_lock_irqsave(&priv->lock, flags);
+	prev_line_status = priv->line_status;
 	priv->line_status = data[status_idx];
 	spin_unlock_irqrestore(&priv->lock, flags);
 	if (priv->line_status & UART_BREAK_ERROR)
 		usb_serial_handle_break(port);
 	wake_up_interruptible(&priv->delta_msr_wait);
+
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+	if ((priv->line_status ^ prev_line_status) & UART_DCD)
+		usb_serial_handle_dcd_change(port, tty,
+				priv->line_status & UART_DCD);
+	tty_kref_put(tty);
 }
 
 static void pl2303_read_int_callback(struct urb *urb)
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 43eb9bdad422..1b025f75dafd 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -21,6 +21,7 @@
 #define PL2303_PRODUCT_ID_MMX		0x0612
 #define PL2303_PRODUCT_ID_GPRS		0x0609
 #define PL2303_PRODUCT_ID_HCR331	0x331a
+#define PL2303_PRODUCT_ID_MOTOROLA	0x0307
 
 #define ATEN_VENDOR_ID		0x0557
 #define ATEN_VENDOR_ID2		0x0547
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 214a3e504292..30b73e68a904 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -36,6 +36,7 @@
 #define UTSTARCOM_PRODUCT_UM175_V1		0x3712
 #define UTSTARCOM_PRODUCT_UM175_V2		0x3714
 #define UTSTARCOM_PRODUCT_UM175_ALLTEL		0x3715
+#define PANTECH_PRODUCT_UML290_VZW		0x3718
 
 /* CMOTECH devices */
 #define CMOTECH_VENDOR_ID			0x16d8
@@ -66,6 +67,7 @@ static struct usb_device_id id_table[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -84,6 +86,7 @@ static struct usb_serial_driver qcaux_device = {
 		.name =		"qcaux",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&qcaux_driver,
 	.num_ports =		1,
 };
 
diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c
index cb8195cabfde..74cd4ccdb3fc 100644
--- a/drivers/usb/serial/siemens_mpi.c
+++ b/drivers/usb/serial/siemens_mpi.c
@@ -42,6 +42,7 @@ static struct usb_serial_driver siemens_usb_mpi_device = {
 		.name =		"siemens_mpi",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&siemens_usb_mpi_driver,
 	.num_ports =		1,
 };
 
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 765aa983bf58..cbfb70bffdd0 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -133,7 +133,7 @@ struct spcp8x5_usb_ctrl_arg {
 
 /* how come ??? */
 #define UART_STATE			0x08
-#define UART_STATE_TRANSIENT_MASK	0x74
+#define UART_STATE_TRANSIENT_MASK	0x75
 #define UART_DCD			0x01
 #define UART_DSR			0x02
 #define UART_BREAK_ERROR		0x04
@@ -525,6 +525,10 @@ static void spcp8x5_process_read_urb(struct urb *urb)
 		/* overrun is special, not associated with a char */
 		if (status & UART_OVERRUN_ERROR)
 			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+		if (status & UART_DCD)
+			usb_serial_handle_dcd_change(port, tty,
+				   priv->line_status & MSR_STATUS_LINE_DCD);
 	}
 
 	tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
@@ -645,6 +649,7 @@ static struct usb_serial_driver spcp8x5_device = {
 		.name =		"SPCP8x5",
 	},
 	.id_table		= id_table,
+	.usb_driver		= &spcp8x5_driver,
 	.num_ports		= 1,
 	.open 			= spcp8x5_open,
 	.dtr_rts		= spcp8x5_dtr_rts,
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index b2902f307b47..a910004f4079 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -369,9 +369,9 @@ failed_1port:
 
 static void __exit ti_exit(void)
 {
+	usb_deregister(&ti_usb_driver);
 	usb_serial_deregister(&ti_1port_device);
 	usb_serial_deregister(&ti_2port_device);
-	usb_deregister(&ti_usb_driver);
 }
 
 
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 6954de50c0ff..546a52179bec 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1344,11 +1344,15 @@ int usb_serial_register(struct usb_serial_driver *driver)
 		return -ENODEV;
 
 	fixup_generic(driver);
-	if (driver->usb_driver)
-		driver->usb_driver->supports_autosuspend = 1;
 
 	if (!driver->description)
 		driver->description = driver->driver.name;
+	if (!driver->usb_driver) {
+		WARN(1, "Serial driver %s has no usb_driver\n",
+				driver->description);
+		return -EINVAL;
+	}
+	driver->usb_driver->supports_autosuspend = 1;
 
 	/* Add this device to our list of devices */
 	mutex_lock(&table_lock);
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index f2ed6a31be77..95a82148ee81 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -75,6 +75,7 @@ static struct usb_serial_driver debug_device = {
 		.name =		"debug",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&debug_driver,
 	.num_ports =		1,
 	.bulk_out_size =	USB_DEBUG_MAX_PACKET_SIZE,
 	.break_ctl =		usb_debug_break_ctl,
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
index c854fdebe0ae..2c8553026222 100644
--- a/drivers/usb/storage/unusual_cypress.h
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -31,4 +31,9 @@ UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
 		"Cypress ISD-300LP",
 		USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
 
+UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x9999,
+		"Super Top",
+		"USB 2.0  SATA BRIDGE",
+		USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
+
 #endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index fcc1e32ce256..c1602b8c5594 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1044,6 +1044,15 @@ UNUSUAL_DEV(  0x084d, 0x0011, 0x0110, 0x0110,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BULK32),
 
+/* Reported by <ttkspam@free.fr>
+ * The device reports a vendor-specific device class, requiring an
+ * explicit vendor/product match.
+ */
+UNUSUAL_DEV(  0x0851, 0x1542, 0x0002, 0x0002,
+		"MagicPixel",
+		"FW_Omega2",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0),
+
 /* Andrew Lunn <andrew@lunn.ch>
  * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
  * on LUN 4.
@@ -1388,6 +1397,13 @@ UNUSUAL_DEV(  0x0f19, 0x0105, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Submitted by Nick Holloway */
+UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100,
+		"VTech",
+		"Kidizoom",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 /* Reported by Michael Stattmann <michael@stattmann.com> */
 UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
 		"Sony Ericsson",
@@ -1872,6 +1888,22 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_READ_DISC_INFO ),
 
+/* Patch by Richard Schütz <r.schtz@t-online.de>
+ * This external hard drive enclosure uses a JMicron chip which
+ * needs the US_FL_IGNORE_RESIDUE flag to work properly. */
+UNUSUAL_DEV(  0x1e68, 0x001b, 0x0000, 0x0000,
+		"TrekStor GmbH & Co. KG",
+		"DataStation maxi g.u",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
+
+/* Reported by Jasper Mackenzie <scarletpimpernal@hotmail.com> */
+UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000,
+		"Coby Electronics",
+		"MP3 Player",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
+
 UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
 		"ST",
 		"2A",