[SCSI] Merge branch 'linus'

Conflicts:
	drivers/message/fusion/mptsas.c

fixed up conflict between req->data_len accessors and mptsas driver updates.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

45 files changed, 1194 insertions, 1091 deletions

diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 0716cdb44cd8..0a3dc5ece634 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_USB_MON)		+= mon/
 obj-$(CONFIG_PCI)		+= host/
 obj-$(CONFIG_USB_EHCI_HCD)	+= host/
 obj-$(CONFIG_USB_ISP116X_HCD)	+= host/
-obj-$(CONFIG_USB_ISP1760_HCD)	+= host/
 obj-$(CONFIG_USB_OHCI_HCD)	+= host/
 obj-$(CONFIG_USB_UHCI_HCD)	+= host/
 obj-$(CONFIG_USB_FHCI_HCD)	+= host/
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 0a69c0977e3f..ddeb69192537 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -16,7 +16,8 @@
  *	v0.9  - thorough cleaning, URBification, almost a rewrite
  *	v0.10 - some more cleanups
  *	v0.11 - fixed flow control, read error doesn't stop reads
- *	v0.12 - added TIOCM ioctls, added break handling, made struct acm kmalloced
+ *	v0.12 - added TIOCM ioctls, added break handling, made struct acm
+ *		kmalloced
  *	v0.13 - added termios, added hangup
  *	v0.14 - sized down struct acm
  *	v0.15 - fixed flow control again - characters could be lost
@@ -62,7 +63,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/cdc.h>
 #include <asm/byteorder.h>
@@ -87,7 +88,10 @@ static struct acm *acm_table[ACM_TTY_MINORS];
 
 static DEFINE_MUTEX(open_mutex);
 
-#define ACM_READY(acm)	(acm && acm->dev && acm->used)
+#define ACM_READY(acm)	(acm && acm->dev && acm->port.count)
+
+static const struct tty_port_operations acm_port_ops = {
+};
 
 #ifdef VERBOSE_DEBUG
 #define verbose	1
@@ -99,13 +103,15 @@ static DEFINE_MUTEX(open_mutex);
  * Functions for ACM control messages.
  */
 
-static int acm_ctrl_msg(struct acm *acm, int request, int value, void *buf, int len)
+static int acm_ctrl_msg(struct acm *acm, int request, int value,
+							void *buf, int len)
 {
 	int retval = usb_control_msg(acm->dev, usb_sndctrlpipe(acm->dev, 0),
 		request, USB_RT_ACM, value,
 		acm->control->altsetting[0].desc.bInterfaceNumber,
 		buf, len, 5000);
-	dbg("acm_control_msg: rq: 0x%02x val: %#x len: %#x result: %d", request, value, len, retval);
+	dbg("acm_control_msg: rq: 0x%02x val: %#x len: %#x result: %d",
+						request, value, len, retval);
 	return retval < 0 ? retval : 0;
 }
 
@@ -150,9 +156,8 @@ static int acm_wb_is_avail(struct acm *acm)
 
 	n = ACM_NW;
 	spin_lock_irqsave(&acm->write_lock, flags);
-	for (i = 0; i < ACM_NW; i++) {
+	for (i = 0; i < ACM_NW; i++)
 		n -= acm->wb[i].use;
-	}
 	spin_unlock_irqrestore(&acm->write_lock, flags);
 	return n;
 }
@@ -183,7 +188,8 @@ static int acm_start_wb(struct acm *acm, struct acm_wb *wb)
 	wb->urb->transfer_buffer_length = wb->len;
 	wb->urb->dev = acm->dev;
 
-	if ((rc = usb_submit_urb(wb->urb, GFP_ATOMIC)) < 0) {
+	rc = usb_submit_urb(wb->urb, GFP_ATOMIC);
+	if (rc < 0) {
 		dbg("usb_submit_urb(write bulk) failed: %d", rc);
 		acm_write_done(acm, wb);
 	}
@@ -262,6 +268,7 @@ static void acm_ctrl_irq(struct urb *urb)
 {
 	struct acm *acm = urb->context;
 	struct usb_cdc_notification *dr = urb->transfer_buffer;
+	struct tty_struct *tty;
 	unsigned char *data;
 	int newctrl;
 	int retval;
@@ -287,40 +294,45 @@ static void acm_ctrl_irq(struct urb *urb)
 
 	data = (unsigned char *)(dr + 1);
 	switch (dr->bNotificationType) {
+	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+		dbg("%s network", dr->wValue ?
+					"connected to" : "disconnected from");
+		break;
 
-		case USB_CDC_NOTIFY_NETWORK_CONNECTION:
-
-			dbg("%s network", dr->wValue ? "connected to" : "disconnected from");
-			break;
-
-		case USB_CDC_NOTIFY_SERIAL_STATE:
-
-			newctrl = get_unaligned_le16(data);
+	case USB_CDC_NOTIFY_SERIAL_STATE:
+		tty = tty_port_tty_get(&acm->port);
+		newctrl = get_unaligned_le16(data);
 
-			if (acm->tty && !acm->clocal && (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) {
+		if (tty) {
+			if (!acm->clocal &&
+				(acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) {
 				dbg("calling hangup");
-				tty_hangup(acm->tty);
+				tty_hangup(tty);
 			}
+			tty_kref_put(tty);
+		}
 
-			acm->ctrlin = newctrl;
-
-			dbg("input control lines: dcd%c dsr%c break%c ring%c framing%c parity%c overrun%c",
-				acm->ctrlin & ACM_CTRL_DCD ? '+' : '-',	acm->ctrlin & ACM_CTRL_DSR ? '+' : '-',
-				acm->ctrlin & ACM_CTRL_BRK ? '+' : '-',	acm->ctrlin & ACM_CTRL_RI  ? '+' : '-',
-				acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-',	acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-',
-				acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-');
+		acm->ctrlin = newctrl;
 
+		dbg("input control lines: dcd%c dsr%c break%c ring%c framing%c parity%c overrun%c",
+			acm->ctrlin & ACM_CTRL_DCD ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_DSR ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_BRK ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_RI  ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-');
 			break;
 
-		default:
-			dbg("unknown notification %d received: index %d len %d data0 %d data1 %d",
-				dr->bNotificationType, dr->wIndex,
-				dr->wLength, data[0], data[1]);
-			break;
+	default:
+		dbg("unknown notification %d received: index %d len %d data0 %d data1 %d",
+			dr->bNotificationType, dr->wIndex,
+			dr->wLength, data[0], data[1]);
+		break;
 	}
 exit:
 	usb_mark_last_busy(acm->dev);
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
 		dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with "
 			"result %d", __func__, retval);
@@ -371,15 +383,14 @@ static void acm_rx_tasklet(unsigned long _acm)
 {
 	struct acm *acm = (void *)_acm;
 	struct acm_rb *buf;
-	struct tty_struct *tty = acm->tty;
+	struct tty_struct *tty;
 	struct acm_ru *rcv;
 	unsigned long flags;
 	unsigned char throttled;
 
 	dbg("Entering acm_rx_tasklet");
 
-	if (!ACM_READY(acm))
-	{
+	if (!ACM_READY(acm)) {
 		dbg("acm_rx_tasklet: ACM not ready");
 		return;
 	}
@@ -387,12 +398,13 @@ static void acm_rx_tasklet(unsigned long _acm)
 	spin_lock_irqsave(&acm->throttle_lock, flags);
 	throttled = acm->throttle;
 	spin_unlock_irqrestore(&acm->throttle_lock, flags);
-	if (throttled)
-	{
+	if (throttled) {
 		dbg("acm_rx_tasklet: throttled");
 		return;
 	}
 
+	tty = tty_port_tty_get(&acm->port);
+
 next_buffer:
 	spin_lock_irqsave(&acm->read_lock, flags);
 	if (list_empty(&acm->filled_read_bufs)) {
@@ -406,20 +418,22 @@ next_buffer:
 
 	dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size);
 
-	tty_buffer_request_room(tty, buf->size);
-	spin_lock_irqsave(&acm->throttle_lock, flags);
-	throttled = acm->throttle;
-	spin_unlock_irqrestore(&acm->throttle_lock, flags);
-	if (!throttled)
-		tty_insert_flip_string(tty, buf->base, buf->size);
-	tty_flip_buffer_push(tty);
-
-	if (throttled) {
-		dbg("Throttling noticed");
-		spin_lock_irqsave(&acm->read_lock, flags);
-		list_add(&buf->list, &acm->filled_read_bufs);
-		spin_unlock_irqrestore(&acm->read_lock, flags);
-		return;
+	if (tty) {
+		spin_lock_irqsave(&acm->throttle_lock, flags);
+		throttled = acm->throttle;
+		spin_unlock_irqrestore(&acm->throttle_lock, flags);
+		if (!throttled) {
+			tty_buffer_request_room(tty, buf->size);
+			tty_insert_flip_string(tty, buf->base, buf->size);
+			tty_flip_buffer_push(tty);
+		} else {
+			tty_kref_put(tty);
+			dbg("Throttling noticed");
+			spin_lock_irqsave(&acm->read_lock, flags);
+			list_add(&buf->list, &acm->filled_read_bufs);
+			spin_unlock_irqrestore(&acm->read_lock, flags);
+			return;
+		}
 	}
 
 	spin_lock_irqsave(&acm->read_lock, flags);
@@ -428,6 +442,8 @@ next_buffer:
 	goto next_buffer;
 
 urbs:
+	tty_kref_put(tty);
+
 	while (!list_empty(&acm->spare_read_bufs)) {
 		spin_lock_irqsave(&acm->read_lock, flags);
 		if (list_empty(&acm->spare_read_urbs)) {
@@ -454,10 +470,11 @@ urbs:
 		rcv->urb->transfer_dma = buf->dma;
 		rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
-		/* This shouldn't kill the driver as unsuccessful URBs are returned to the
-		   free-urbs-pool and resubmited ASAP */
+		/* This shouldn't kill the driver as unsuccessful URBs are
+		   returned to the free-urbs-pool and resubmited ASAP */
 		spin_lock_irqsave(&acm->read_lock, flags);
-		if (acm->susp_count || usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) {
+		if (acm->susp_count ||
+				usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) {
 			list_add(&buf->list, &acm->spare_read_bufs);
 			list_add(&rcv->list, &acm->spare_read_urbs);
 			acm->processing = 0;
@@ -499,11 +516,14 @@ static void acm_write_bulk(struct urb *urb)
 static void acm_softint(struct work_struct *work)
 {
 	struct acm *acm = container_of(work, struct acm, work);
+	struct tty_struct *tty;
 
 	dev_vdbg(&acm->data->dev, "tx work\n");
 	if (!ACM_READY(acm))
 		return;
-	tty_wakeup(acm->tty);
+	tty = tty_port_tty_get(&acm->port);
+	tty_wakeup(tty);
+	tty_kref_put(tty);
 }
 
 static void acm_waker(struct work_struct *waker)
@@ -543,8 +563,9 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 		rv = 0;
 
 	set_bit(TTY_NO_WRITE_SPLIT, &tty->flags);
+
 	tty->driver_data = acm;
-	acm->tty = tty;
+	tty_port_tty_set(&acm->port, tty);
 
 	if (usb_autopm_get_interface(acm->control) < 0)
 		goto early_bail;
@@ -552,11 +573,10 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 		acm->control->needs_remote_wakeup = 1;
 
 	mutex_lock(&acm->mutex);
-	if (acm->used++) {
+	if (acm->port.count++) {
 		usb_autopm_put_interface(acm->control);
 		goto done;
-        }
-
+	}
 
 	acm->ctrlurb->dev = acm->dev;
 	if (usb_submit_urb(acm->ctrlurb, GFP_KERNEL)) {
@@ -567,22 +587,22 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 	if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS) &&
 	    (acm->ctrl_caps & USB_CDC_CAP_LINE))
 		goto full_bailout;
+
 	usb_autopm_put_interface(acm->control);
 
 	INIT_LIST_HEAD(&acm->spare_read_urbs);
 	INIT_LIST_HEAD(&acm->spare_read_bufs);
 	INIT_LIST_HEAD(&acm->filled_read_bufs);
-	for (i = 0; i < acm->rx_buflimit; i++) {
+
+	for (i = 0; i < acm->rx_buflimit; i++)
 		list_add(&(acm->ru[i].list), &acm->spare_read_urbs);
-	}
-	for (i = 0; i < acm->rx_buflimit; i++) {
+	for (i = 0; i < acm->rx_buflimit; i++)
 		list_add(&(acm->rb[i].list), &acm->spare_read_bufs);
-	}
 
 	acm->throttle = 0;
 
 	tasklet_schedule(&acm->urb_task);
-
+	rv = tty_port_block_til_ready(&acm->port, tty, filp);
 done:
 	mutex_unlock(&acm->mutex);
 err_out:
@@ -593,16 +613,17 @@ full_bailout:
 	usb_kill_urb(acm->ctrlurb);
 bail_out:
 	usb_autopm_put_interface(acm->control);
-	acm->used--;
+	acm->port.count--;
 	mutex_unlock(&acm->mutex);
 early_bail:
 	mutex_unlock(&open_mutex);
+	tty_port_tty_set(&acm->port, NULL);
 	return -EIO;
 }
 
 static void acm_tty_unregister(struct acm *acm)
 {
-	int i,nr;
+	int i, nr;
 
 	nr = acm->rx_buflimit;
 	tty_unregister_device(acm_tty_driver, acm->minor);
@@ -619,41 +640,56 @@ static void acm_tty_unregister(struct acm *acm)
 
 static int acm_tty_chars_in_buffer(struct tty_struct *tty);
 
+static void acm_port_down(struct acm *acm, int drain)
+{
+	int i, nr = acm->rx_buflimit;
+	mutex_lock(&open_mutex);
+	if (acm->dev) {
+		usb_autopm_get_interface(acm->control);
+		acm_set_control(acm, acm->ctrlout = 0);
+		/* try letting the last writes drain naturally */
+		if (drain) {
+			wait_event_interruptible_timeout(acm->drain_wait,
+				(ACM_NW == acm_wb_is_avail(acm)) || !acm->dev,
+					ACM_CLOSE_TIMEOUT * HZ);
+		}
+		usb_kill_urb(acm->ctrlurb);
+		for (i = 0; i < ACM_NW; i++)
+			usb_kill_urb(acm->wb[i].urb);
+		for (i = 0; i < nr; i++)
+			usb_kill_urb(acm->ru[i].urb);
+		acm->control->needs_remote_wakeup = 0;
+		usb_autopm_put_interface(acm->control);
+	}
+	mutex_unlock(&open_mutex);
+}
+
+static void acm_tty_hangup(struct tty_struct *tty)
+{
+	struct acm *acm = tty->driver_data;
+	tty_port_hangup(&acm->port);
+	acm_port_down(acm, 0);
+}
+
 static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 {
 	struct acm *acm = tty->driver_data;
-	int i,nr;
 
-	if (!acm || !acm->used)
+	/* Perform the closing process and see if we need to do the hardware
+	   shutdown */
+	if (tty_port_close_start(&acm->port, tty, filp) == 0)
 		return;
-
-	nr = acm->rx_buflimit;
+	acm_port_down(acm, 0);
+	tty_port_close_end(&acm->port, tty);
 	mutex_lock(&open_mutex);
-	if (!--acm->used) {
-		if (acm->dev) {
-			usb_autopm_get_interface(acm->control);
-			acm_set_control(acm, acm->ctrlout = 0);
-
-			/* try letting the last writes drain naturally */
-			wait_event_interruptible_timeout(acm->drain_wait,
-					(ACM_NW == acm_wb_is_avail(acm))
-						|| !acm->dev,
-					ACM_CLOSE_TIMEOUT * HZ);
-
-			usb_kill_urb(acm->ctrlurb);
-			for (i = 0; i < ACM_NW; i++)
-				usb_kill_urb(acm->wb[i].urb);
-			for (i = 0; i < nr; i++)
-				usb_kill_urb(acm->ru[i].urb);
-			acm->control->needs_remote_wakeup = 0;
-			usb_autopm_put_interface(acm->control);
-		} else
-			acm_tty_unregister(acm);
-	}
+	tty_port_tty_set(&acm->port, NULL);
+	if (!acm->dev)
+		acm_tty_unregister(acm);
 	mutex_unlock(&open_mutex);
 }
 
-static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int count)
+static int acm_tty_write(struct tty_struct *tty,
+					const unsigned char *buf, int count)
 {
 	struct acm *acm = tty->driver_data;
 	int stat;
@@ -669,7 +705,8 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c
 		return 0;
 
 	spin_lock_irqsave(&acm->write_lock, flags);
-	if ((wbn = acm_wb_alloc(acm)) < 0) {
+	wbn = acm_wb_alloc(acm);
+	if (wbn < 0) {
 		spin_unlock_irqrestore(&acm->write_lock, flags);
 		return 0;
 	}
@@ -681,7 +718,8 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c
 	wb->len = count;
 	spin_unlock_irqrestore(&acm->write_lock, flags);
 
-	if ((stat = acm_write_start(acm, wbn)) < 0)
+	stat = acm_write_start(acm, wbn);
+	if (stat < 0)
 		return stat;
 	return count;
 }
@@ -767,8 +805,10 @@ static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file,
 		return -EINVAL;
 
 	newctrl = acm->ctrlout;
-	set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) | (set & TIOCM_RTS ? ACM_CTRL_RTS : 0);
-	clear = (clear & TIOCM_DTR ? ACM_CTRL_DTR : 0) | (clear & TIOCM_RTS ? ACM_CTRL_RTS : 0);
+	set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) |
+					(set & TIOCM_RTS ? ACM_CTRL_RTS : 0);
+	clear = (clear & TIOCM_DTR ? ACM_CTRL_DTR : 0) |
+					(clear & TIOCM_RTS ? ACM_CTRL_RTS : 0);
 
 	newctrl = (newctrl & ~clear) | set;
 
@@ -777,7 +817,8 @@ static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file,
 	return acm_set_control(acm, acm->ctrlout = newctrl);
 }
 
-static int acm_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
+static int acm_tty_ioctl(struct tty_struct *tty, struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	struct acm *acm = tty->driver_data;
 
@@ -799,7 +840,8 @@ static const __u8 acm_tty_size[] = {
 	5, 6, 7, 8
 };
 
-static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios_old)
+static void acm_tty_set_termios(struct tty_struct *tty,
+						struct ktermios *termios_old)
 {
 	struct acm *acm = tty->driver_data;
 	struct ktermios *termios = tty->termios;
@@ -809,19 +851,23 @@ static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios
 	if (!ACM_READY(acm))
 		return;
 
+	/* FIXME: Needs to support the tty_baud interface */
+	/* FIXME: Broken on sparc */
 	newline.dwDTERate = cpu_to_le32p(acm_tty_speed +
 		(termios->c_cflag & CBAUD & ~CBAUDEX) + (termios->c_cflag & CBAUDEX ? 15 : 0));
 	newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0;
 	newline.bParityType = termios->c_cflag & PARENB ?
-		(termios->c_cflag & PARODD ? 1 : 2) + (termios->c_cflag & CMSPAR ? 2 : 0) : 0;
+				(termios->c_cflag & PARODD ? 1 : 2) +
+				(termios->c_cflag & CMSPAR ? 2 : 0) : 0;
 	newline.bDataBits = acm_tty_size[(termios->c_cflag & CSIZE) >> 4];
-
+	/* FIXME: Needs to clear unsupported bits in the termios */
 	acm->clocal = ((termios->c_cflag & CLOCAL) != 0);
 
 	if (!newline.dwDTERate) {
 		newline.dwDTERate = acm->line.dwDTERate;
 		newctrl &= ~ACM_CTRL_DTR;
-	} else  newctrl |=  ACM_CTRL_DTR;
+	} else
+		newctrl |=  ACM_CTRL_DTR;
 
 	if (newctrl != acm->ctrlout)
 		acm_set_control(acm, acm->ctrlout = newctrl);
@@ -846,9 +892,8 @@ static void acm_write_buffers_free(struct acm *acm)
 	struct acm_wb *wb;
 	struct usb_device *usb_dev = interface_to_usbdev(acm->control);
 
-	for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) {
+	for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++)
 		usb_buffer_free(usb_dev, acm->writesize, wb->buf, wb->dmah);
-	}
 }
 
 static void acm_read_buffers_free(struct acm *acm)
@@ -857,7 +902,8 @@ static void acm_read_buffers_free(struct acm *acm)
 	int i, n = acm->rx_buflimit;
 
 	for (i = 0; i < n; i++)
-		usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma);
+		usb_buffer_free(usb_dev, acm->readsize,
+					acm->rb[i].base, acm->rb[i].dma);
 }
 
 /* Little helper: write buffers allocate */
@@ -882,8 +928,8 @@ static int acm_write_buffers_alloc(struct acm *acm)
 	return 0;
 }
 
-static int acm_probe (struct usb_interface *intf,
-		      const struct usb_device_id *id)
+static int acm_probe(struct usb_interface *intf,
+		     const struct usb_device_id *id)
 {
 	struct usb_cdc_union_desc *union_header = NULL;
 	struct usb_cdc_country_functional_desc *cfd = NULL;
@@ -897,7 +943,7 @@ static int acm_probe (struct usb_interface *intf,
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
 	struct acm *acm;
 	int minor;
-	int ctrlsize,readsize;
+	int ctrlsize, readsize;
 	u8 *buf;
 	u8 ac_management_function = 0;
 	u8 call_management_function = 0;
@@ -917,7 +963,7 @@ static int acm_probe (struct usb_interface *intf,
 		control_interface = usb_ifnum_to_if(usb_dev, 0);
 		goto skip_normal_probe;
 	}
-	
+
 	/* normal probing*/
 	if (!buffer) {
 		dev_err(&intf->dev, "Weird descriptor references\n");
@@ -925,8 +971,10 @@ static int acm_probe (struct usb_interface *intf,
 	}
 
 	if (!buflen) {
-		if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) {
-			dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n");
+		if (intf->cur_altsetting->endpoint->extralen &&
+				intf->cur_altsetting->endpoint->extra) {
+			dev_dbg(&intf->dev,
+				"Seeking extra descriptors on endpoint\n");
 			buflen = intf->cur_altsetting->endpoint->extralen;
 			buffer = intf->cur_altsetting->endpoint->extra;
 		} else {
@@ -937,47 +985,43 @@ static int acm_probe (struct usb_interface *intf,
 	}
 
 	while (buflen > 0) {
-		if (buffer [1] != USB_DT_CS_INTERFACE) {
+		if (buffer[1] != USB_DT_CS_INTERFACE) {
 			dev_err(&intf->dev, "skipping garbage\n");
 			goto next_desc;
 		}
 
-		switch (buffer [2]) {
-			case USB_CDC_UNION_TYPE: /* we've found it */
-				if (union_header) {
-					dev_err(&intf->dev, "More than one "
-						"union descriptor, "
-						"skipping ...\n");
-					goto next_desc;
-				}
-				union_header = (struct usb_cdc_union_desc *)
-							buffer;
-				break;
-			case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/
-				cfd = (struct usb_cdc_country_functional_desc *)buffer;
-				break;
-			case USB_CDC_HEADER_TYPE: /* maybe check version */ 
-				break; /* for now we ignore it */ 
-			case USB_CDC_ACM_TYPE:
-				ac_management_function = buffer[3];
-				break;
-			case USB_CDC_CALL_MANAGEMENT_TYPE:
-				call_management_function = buffer[3];
-				call_interface_num = buffer[4];
-				if ((call_management_function & 3) != 3)
-					dev_err(&intf->dev, "This device "
-						"cannot do calls on its own. "
-						"It is no modem.\n");
-				break;
-			default:
-				/* there are LOTS more CDC descriptors that
-				 * could legitimately be found here.
-				 */
-				dev_dbg(&intf->dev, "Ignoring descriptor: "
-						"type %02x, length %d\n",
-						buffer[2], buffer[0]);
-				break;
+		switch (buffer[2]) {
+		case USB_CDC_UNION_TYPE: /* we've found it */
+			if (union_header) {
+				dev_err(&intf->dev, "More than one "
+					"union descriptor, skipping ...\n");
+				goto next_desc;
 			}
+			union_header = (struct usb_cdc_union_desc *)buffer;
+			break;
+		case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/
+			cfd = (struct usb_cdc_country_functional_desc *)buffer;
+			break;
+		case USB_CDC_HEADER_TYPE: /* maybe check version */
+			break; /* for now we ignore it */
+		case USB_CDC_ACM_TYPE:
+			ac_management_function = buffer[3];
+			break;
+		case USB_CDC_CALL_MANAGEMENT_TYPE:
+			call_management_function = buffer[3];
+			call_interface_num = buffer[4];
+			if ((call_management_function & 3) != 3)
+				dev_err(&intf->dev, "This device cannot do calls on its own. It is not a modem.\n");
+			break;
+		default:
+			/* there are LOTS more CDC descriptors that
+			 * could legitimately be found here.
+			 */
+			dev_dbg(&intf->dev, "Ignoring descriptor: "
+					"type %02x, length %d\n",
+					buffer[2], buffer[0]);
+			break;
+		}
 next_desc:
 		buflen -= buffer[0];
 		buffer += buffer[0];
@@ -985,33 +1029,36 @@ next_desc:
 
 	if (!union_header) {
 		if (call_interface_num > 0) {
-			dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n");
+			dev_dbg(&intf->dev, "No union descriptor, using call management descriptor\n");
 			data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
 			control_interface = intf;
 		} else {
-			dev_dbg(&intf->dev,"No union descriptor, giving up\n");
+			dev_dbg(&intf->dev,
+					"No union descriptor, giving up\n");
 			return -ENODEV;
 		}
 	} else {
 		control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
 		data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
 		if (!control_interface || !data_interface) {
-			dev_dbg(&intf->dev,"no interfaces\n");
+			dev_dbg(&intf->dev, "no interfaces\n");
 			return -ENODEV;
 		}
 	}
-	
+
 	if (data_interface_num != call_interface_num)
-		dev_dbg(&intf->dev,"Separate call control interface. That is not fully supported.\n");
+		dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n");
 
 skip_normal_probe:
 
 	/*workaround for switched interfaces */
-	if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) {
-		if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) {
+	if (data_interface->cur_altsetting->desc.bInterfaceClass
+						!= CDC_DATA_INTERFACE_TYPE) {
+		if (control_interface->cur_altsetting->desc.bInterfaceClass
+						== CDC_DATA_INTERFACE_TYPE) {
 			struct usb_interface *t;
-			dev_dbg(&intf->dev,"Your device has switched interfaces.\n");
-
+			dev_dbg(&intf->dev,
+				"Your device has switched interfaces.\n");
 			t = control_interface;
 			control_interface = data_interface;
 			data_interface = t;
@@ -1023,9 +1070,9 @@ skip_normal_probe:
 	/* Accept probe requests only for the control interface */
 	if (intf != control_interface)
 		return -ENODEV;
-	
+
 	if (usb_interface_claimed(data_interface)) { /* valid in this context */
-		dev_dbg(&intf->dev,"The data interface isn't available\n");
+		dev_dbg(&intf->dev, "The data interface isn't available\n");
 		return -EBUSY;
 	}
 
@@ -1042,8 +1089,8 @@ skip_normal_probe:
 	if (!usb_endpoint_dir_in(epread)) {
 		/* descriptors are swapped */
 		struct usb_endpoint_descriptor *t;
-		dev_dbg(&intf->dev,"The data interface has switched endpoints\n");
-		
+		dev_dbg(&intf->dev,
+			"The data interface has switched endpoints\n");
 		t = epread;
 		epread = epwrite;
 		epwrite = t;
@@ -1056,13 +1103,15 @@ skip_normal_probe:
 		return -ENODEV;
 	}
 
-	if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) {
+	acm = kzalloc(sizeof(struct acm), GFP_KERNEL);
+	if (acm == NULL) {
 		dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n");
 		goto alloc_fail;
 	}
 
 	ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize);
-	readsize = le16_to_cpu(epread->wMaxPacketSize)* ( quirks == SINGLE_RX_URB ? 1 : 2);
+	readsize = le16_to_cpu(epread->wMaxPacketSize) *
+				(quirks == SINGLE_RX_URB ? 1 : 2);
 	acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize) * 20;
 	acm->control = control_interface;
 	acm->data = data_interface;
@@ -1082,6 +1131,8 @@ skip_normal_probe:
 	spin_lock_init(&acm->read_lock);
 	mutex_init(&acm->mutex);
 	acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
+	tty_port_init(&acm->port);
+	acm->port.ops = &acm_port_ops;
 
 	buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
 	if (!buf) {
@@ -1103,8 +1154,10 @@ skip_normal_probe:
 	for (i = 0; i < num_rx_buf; i++) {
 		struct acm_ru *rcv = &(acm->ru[i]);
 
-		if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) {
-			dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n");
+		rcv->urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (rcv->urb == NULL) {
+			dev_dbg(&intf->dev,
+				"out of memory (read urbs usb_alloc_urb)\n");
 			goto alloc_fail7;
 		}
 
@@ -1117,26 +1170,29 @@ skip_normal_probe:
 		rb->base = usb_buffer_alloc(acm->dev, readsize,
 				GFP_KERNEL, &rb->dma);
 		if (!rb->base) {
-			dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
+			dev_dbg(&intf->dev,
+				"out of memory (read bufs usb_buffer_alloc)\n");
 			goto alloc_fail7;
 		}
 	}
-	for(i = 0; i < ACM_NW; i++)
-	{
+	for (i = 0; i < ACM_NW; i++) {
 		struct acm_wb *snd = &(acm->wb[i]);
 
-		if (!(snd->urb = usb_alloc_urb(0, GFP_KERNEL))) {
-			dev_dbg(&intf->dev, "out of memory (write urbs usb_alloc_urb)");
+		snd->urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (snd->urb == NULL) {
+			dev_dbg(&intf->dev,
+				"out of memory (write urbs usb_alloc_urb)");
 			goto alloc_fail7;
 		}
 
-		usb_fill_bulk_urb(snd->urb, usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
-				NULL, acm->writesize, acm_write_bulk, snd);
+		usb_fill_bulk_urb(snd->urb, usb_dev,
+			usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+			NULL, acm->writesize, acm_write_bulk, snd);
 		snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 		snd->instance = acm;
 	}
 
-	usb_set_intfdata (intf, acm);
+	usb_set_intfdata(intf, acm);
 
 	i = device_create_file(&intf->dev, &dev_attr_bmCapabilities);
 	if (i < 0)
@@ -1147,7 +1203,8 @@ skip_normal_probe:
 		if (!acm->country_codes)
 			goto skip_countries;
 		acm->country_code_size = cfd->bLength - 4;
-		memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0, cfd->bLength - 4);
+		memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0,
+							cfd->bLength - 4);
 		acm->country_rel_date = cfd->iCountryCodeRelDate;
 
 		i = device_create_file(&intf->dev, &dev_attr_wCountryCodes);
@@ -1156,7 +1213,8 @@ skip_normal_probe:
 			goto skip_countries;
 		}
 
-		i = device_create_file(&intf->dev, &dev_attr_iCountryCodeRelDate);
+		i = device_create_file(&intf->dev,
+						&dev_attr_iCountryCodeRelDate);
 		if (i < 0) {
 			kfree(acm->country_codes);
 			goto skip_countries;
@@ -1164,8 +1222,10 @@ skip_normal_probe:
 	}
 
 skip_countries:
-	usb_fill_int_urb(acm->ctrlurb, usb_dev, usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
-			 acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm, epctrl->bInterval);
+	usb_fill_int_urb(acm->ctrlurb, usb_dev,
+			usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
+			acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm,
+			epctrl->bInterval);
 	acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	acm->ctrlurb->transfer_dma = acm->ctrl_dma;
 
@@ -1212,7 +1272,7 @@ static void stop_data_traffic(struct acm *acm)
 	tasklet_disable(&acm->urb_task);
 
 	usb_kill_urb(acm->ctrlurb);
-	for(i = 0; i < ACM_NW; i++)
+	for (i = 0; i < ACM_NW; i++)
 		usb_kill_urb(acm->wb[i].urb);
 	for (i = 0; i < acm->rx_buflimit; i++)
 		usb_kill_urb(acm->ru[i].urb);
@@ -1227,13 +1287,14 @@ static void acm_disconnect(struct usb_interface *intf)
 {
 	struct acm *acm = usb_get_intfdata(intf);
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	struct tty_struct *tty;
 
 	/* sibling interface is already cleaning up */
 	if (!acm)
 		return;
 
 	mutex_lock(&open_mutex);
-	if (acm->country_codes){
+	if (acm->country_codes) {
 		device_remove_file(&acm->control->dev,
 				&dev_attr_wCountryCodes);
 		device_remove_file(&acm->control->dev,
@@ -1247,22 +1308,25 @@ static void acm_disconnect(struct usb_interface *intf)
 	stop_data_traffic(acm);
 
 	acm_write_buffers_free(acm);
-	usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
+	usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer,
+								acm->ctrl_dma);
 	acm_read_buffers_free(acm);
 
 	usb_driver_release_interface(&acm_driver, intf == acm->control ?
 					acm->data : acm->control);
 
-	if (!acm->used) {
+	if (acm->port.count == 0) {
 		acm_tty_unregister(acm);
 		mutex_unlock(&open_mutex);
 		return;
 	}
 
 	mutex_unlock(&open_mutex);
-
-	if (acm->tty)
-		tty_hangup(acm->tty);
+	tty = tty_port_tty_get(&acm->port);
+	if (tty) {
+		tty_hangup(tty);
+		tty_kref_put(tty);
+	}
 }
 
 #ifdef CONFIG_PM
@@ -1297,7 +1361,7 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message)
 	*/
 	mutex_lock(&acm->mutex);
 
-	if (acm->used)
+	if (acm->port.count)
 		stop_data_traffic(acm);
 
 	mutex_unlock(&acm->mutex);
@@ -1319,7 +1383,7 @@ static int acm_resume(struct usb_interface *intf)
 		return 0;
 
 	mutex_lock(&acm->mutex);
-	if (acm->used) {
+	if (acm->port.count) {
 		rv = usb_submit_urb(acm->ctrlurb, GFP_NOIO);
 		if (rv < 0)
 			goto err_out;
@@ -1375,6 +1439,9 @@ static struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
 	{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
 	},
 	{ USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
@@ -1395,7 +1462,7 @@ static struct usb_device_id acm_ids[] = {
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_GSM) },
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
-		USB_CDC_ACM_PROTO_AT_3G	) },
+		USB_CDC_ACM_PROTO_AT_3G) },
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_CDMA) },
 
@@ -1403,7 +1470,7 @@ static struct usb_device_id acm_ids[] = {
 	{ }
 };
 
-MODULE_DEVICE_TABLE (usb, acm_ids);
+MODULE_DEVICE_TABLE(usb, acm_ids);
 
 static struct usb_driver acm_driver = {
 	.name =		"cdc_acm",
@@ -1426,6 +1493,7 @@ static struct usb_driver acm_driver = {
 static const struct tty_operations acm_ops = {
 	.open =			acm_tty_open,
 	.close =		acm_tty_close,
+	.hangup =		acm_tty_hangup,
 	.write =		acm_tty_write,
 	.write_room =		acm_tty_write_room,
 	.ioctl =		acm_tty_ioctl,
@@ -1457,7 +1525,8 @@ static int __init acm_init(void)
 	acm_tty_driver->subtype = SERIAL_TYPE_NORMAL,
 	acm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
 	acm_tty_driver->init_termios = tty_std_termios;
-	acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD |
+								HUPCL | CLOCAL;
 	tty_set_operations(acm_tty_driver, &acm_ops);
 
 	retval = tty_register_driver(acm_tty_driver);
@@ -1489,7 +1558,7 @@ static void __exit acm_exit(void)
 module_init(acm_init);
 module_exit(acm_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_CHARDEV_MAJOR(ACM_TTY_MAJOR);
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 1f95e7aa1b66..4c3856420add 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -89,8 +89,8 @@ struct acm {
 	struct usb_device *dev;				/* the corresponding usb device */
 	struct usb_interface *control;			/* control interface */
 	struct usb_interface *data;			/* data interface */
-	struct tty_struct *tty;				/* the corresponding tty */
-	struct urb *ctrlurb;			/* urbs */
+	struct tty_port port;			 	/* our tty port data */
+	struct urb *ctrlurb;				/* urbs */
 	u8 *ctrl_buffer;				/* buffers of urbs */
 	dma_addr_t ctrl_dma;				/* dma handles of buffers */
 	u8 *country_codes;				/* country codes from device */
@@ -120,7 +120,6 @@ struct acm {
 	unsigned int ctrlout;				/* output control lines (DTR, RTS) */
 	unsigned int writesize;				/* max packet size for the output bulk endpoint */
 	unsigned int readsize,ctrlsize;			/* buffer sizes for freeing */
-	unsigned int used;				/* someone has this acm's device open */
 	unsigned int minor;				/* acm minor number */
 	unsigned char throttle;				/* throttled by tty layer */
 	unsigned char clocal;				/* termios CLOCAL */
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index dff5760a37f6..ffe75e83787c 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -39,6 +39,7 @@
 #include <linux/parser.h>
 #include <linux/notifier.h>
 #include <linux/seq_file.h>
+#include <linux/smp_lock.h>
 #include <asm/byteorder.h>
 #include "usb.h"
 #include "hcd.h"
@@ -265,9 +266,13 @@ static int remount(struct super_block *sb, int *flags, char *data)
 		return -EINVAL;
 	}
 
+	lock_kernel();
+
 	if (usbfs_mount && usbfs_mount->mnt_sb)
 		update_sb(usbfs_mount->mnt_sb);
 
+	unlock_kernel();
+
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 563d57275448..05c913cc3658 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -794,7 +794,8 @@ usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	if (ep->desc) {
 		list_add_tail(&req->queue, &ep->queue);
 
-		if (ep->is_in || (ep_is_control(ep)
+		if ((!ep_is_control(ep) && ep->is_in) ||
+			(ep_is_control(ep)
 				&& (ep->state == DATA_STAGE_IN
 					|| ep->state == STATUS_STAGE_IN)))
 			usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
@@ -1940,7 +1941,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
 	clk_disable(pclk);
 
-	usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep,
+	usba_ep = kzalloc(sizeof(struct usba_ep) * pdata->num_ep,
 			  GFP_KERNEL);
 	if (!usba_ep)
 		goto err_alloc_ep;
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index cd07ea3f0c63..15438469f21a 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1658,6 +1658,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 	u32 reg_base, or_reg, skip_reg;
 	unsigned long flags;
 	struct ptd ptd;
+	packet_enqueue *pe;
 
 	switch (usb_pipetype(urb->pipe)) {
 	case PIPE_ISOCHRONOUS:
@@ -1669,6 +1670,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 		reg_base = INT_REGS_OFFSET;
 		or_reg = HC_INT_IRQ_MASK_OR_REG;
 		skip_reg = HC_INT_PTD_SKIPMAP_REG;
+		pe = enqueue_an_INT_packet;
 		break;
 
 	default:
@@ -1676,6 +1678,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 		reg_base = ATL_REGS_OFFSET;
 		or_reg = HC_ATL_IRQ_MASK_OR_REG;
 		skip_reg = HC_ATL_PTD_SKIPMAP_REG;
+		pe =  enqueue_an_ATL_packet;
 		break;
 	}
 
@@ -1687,6 +1690,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 			u32 skip_map;
 			u32 or_map;
 			struct isp1760_qtd *qtd;
+			struct isp1760_qh *qh = ints->qh;
 
 			skip_map = isp1760_readl(hcd->regs + skip_reg);
 			skip_map |= 1 << i;
@@ -1699,8 +1703,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 			priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base
 					+ i * sizeof(ptd), sizeof(ptd));
 			qtd = ints->qtd;
-
-			clean_up_qtdlist(qtd);
+			qtd = clean_up_qtdlist(qtd);
 
 			free_mem(priv, ints->payload);
 
@@ -1711,7 +1714,24 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 			ints->payload = 0;
 
 			isp1760_urb_done(priv, urb, status);
+			if (qtd)
+				pe(hcd, qh, qtd);
 			break;
+
+		} else if (ints->qtd) {
+			struct isp1760_qtd *qtd, *prev_qtd = ints->qtd;
+
+			for (qtd = ints->qtd->hw_next; qtd; qtd = qtd->hw_next) {
+				if (qtd->urb == urb) {
+					prev_qtd->hw_next = clean_up_qtdlist(qtd);
+					isp1760_urb_done(priv, urb, status);
+					break;
+				}
+				prev_qtd = qtd;
+			}
+			/* we found the urb before the end of the list */
+			if (qtd)
+				break;
 		}
 		ints++;
 	}
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index b7eacad4d48c..2bfd6dd85b5a 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -93,8 +93,7 @@ static int  belkin_sa_startup(struct usb_serial *serial);
 static void belkin_sa_shutdown(struct usb_serial *serial);
 static int  belkin_sa_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void belkin_sa_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void belkin_sa_close(struct usb_serial_port *port);
 static void belkin_sa_read_int_callback(struct urb *urb);
 static void belkin_sa_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios * old);
@@ -244,8 +243,7 @@ exit:
 } /* belkin_sa_open */
 
 
-static void belkin_sa_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void belkin_sa_close(struct usb_serial_port *port)
 {
 	dbg("%s port %d", __func__, port->number);
 
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index ab4cc277aa65..2830766f5b39 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -262,32 +262,40 @@ error:	kfree(priv);
 	return r;
 }
 
-static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int ch341_carrier_raised(struct usb_serial_port *port)
+{
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	if (priv->line_status & CH341_BIT_DCD)
+		return 1;
+	return 0;
+}
+
+static void ch341_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct ch341_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	unsigned int c_cflag;
 
 	dbg("%s - port %d", __func__, port->number);
+	/* drop DTR and RTS */
+	spin_lock_irqsave(&priv->lock, flags);
+	if (on)
+		priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR;
+	else
+		priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	ch341_set_handshake(port->serial->dev, priv->line_control);
+	wake_up_interruptible(&priv->delta_msr_wait);
+}
+
+static void ch341_close(struct usb_serial_port *port)
+{
+	dbg("%s - port %d", __func__, port->number);
 
 	/* shutdown our urbs */
 	dbg("%s - shutting down urbs", __func__);
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->interrupt_in_urb);
-
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		if (c_cflag & HUPCL) {
-			/* drop DTR and RTS */
-			spin_lock_irqsave(&priv->lock, flags);
-			priv->line_control = 0;
-			spin_unlock_irqrestore(&priv->lock, flags);
-			ch341_set_handshake(port->serial->dev, 0);
-		}
-	}
-	wake_up_interruptible(&priv->delta_msr_wait);
 }
 
 
@@ -302,7 +310,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 	dbg("ch341_open()");
 
 	priv->baud_rate = DEFAULT_BAUD_RATE;
-	priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
 
 	r = ch341_configure(serial->dev, priv);
 	if (r)
@@ -322,7 +329,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 	if (r) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
 			" error %d\n", __func__, r);
-		ch341_close(tty, port, NULL);
+		ch341_close(port);
 		return -EPROTO;
 	}
 
@@ -343,9 +350,6 @@ static void ch341_set_termios(struct tty_struct *tty,
 
 	dbg("ch341_set_termios()");
 
-	if (!tty || !tty->termios)
-		return;
-
 	baud_rate = tty_get_baud_rate(tty);
 
 	priv->baud_rate = baud_rate;
@@ -568,6 +572,8 @@ static struct usb_serial_driver ch341_device = {
 	.usb_driver        = &ch341_driver,
 	.num_ports         = 1,
 	.open              = ch341_open,
+	.dtr_rts	   = ch341_dtr_rts,
+	.carrier_raised	   = ch341_carrier_raised,
 	.close             = ch341_close,
 	.ioctl             = ch341_ioctl,
 	.set_termios       = ch341_set_termios,
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 19e24045b137..247b61bfb7f4 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -169,7 +169,9 @@ static int usb_console_setup(struct console *co, char *options)
 			kfree(tty);
 		}
 	}
-
+	/* So we know not to kill the hardware on a hangup on this
+	   port. We have also bumped the use count by one so it won't go
+	   idle */
 	port->console = 1;
 	retval = 0;
 
@@ -182,7 +184,7 @@ free_tty:
 	kfree(tty);
 reset_open_count:
 	port->port.count = 0;
-goto out;
+	goto out;
 }
 
 static void usb_console_write(struct console *co,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index e8d5133ce9c8..16a154d3b2fe 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -1,5 +1,5 @@
 /*
- * Silicon Laboratories CP2101/CP2102 USB to RS232 serial adaptor driver
+ * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
  *
  * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
  *
@@ -27,44 +27,46 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.08"
-#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
+#define DRIVER_VERSION "v0.09"
+#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
 
 /*
  * Function Prototypes
  */
-static int cp2101_open(struct tty_struct *, struct usb_serial_port *,
+static int cp210x_open(struct tty_struct *, struct usb_serial_port *,
 							struct file *);
-static void cp2101_cleanup(struct usb_serial_port *);
-static void cp2101_close(struct tty_struct *, struct usb_serial_port *,
-							struct file*);
-static void cp2101_get_termios(struct tty_struct *,
+static void cp210x_cleanup(struct usb_serial_port *);
+static void cp210x_close(struct usb_serial_port *);
+static void cp210x_get_termios(struct tty_struct *,
 	struct usb_serial_port *port);
-static void cp2101_get_termios_port(struct usb_serial_port *port,
+static void cp210x_get_termios_port(struct usb_serial_port *port,
 	unsigned int *cflagp, unsigned int *baudp);
-static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *,
+static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
 							struct ktermios*);
-static int cp2101_tiocmget(struct tty_struct *, struct file *);
-static int cp2101_tiocmset(struct tty_struct *, struct file *,
+static int cp210x_tiocmget(struct tty_struct *, struct file *);
+static int cp210x_tiocmset(struct tty_struct *, struct file *,
 		unsigned int, unsigned int);
-static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *,
+static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
 		unsigned int, unsigned int);
-static void cp2101_break_ctl(struct tty_struct *, int);
-static int cp2101_startup(struct usb_serial *);
-static void cp2101_shutdown(struct usb_serial *);
+static void cp210x_break_ctl(struct tty_struct *, int);
+static int cp210x_startup(struct usb_serial *);
+static void cp210x_shutdown(struct usb_serial *);
 
 static int debug;
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
 	{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
+	{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
 	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
+	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
 	{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
 	{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
 	{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
 	{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
 	{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
 	{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
+	{ USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
 	{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
 	{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
 	{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
@@ -85,10 +87,12 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
 	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
+	{ USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
 	{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
 	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
 	{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
+	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
@@ -99,7 +103,9 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
 	{ USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
 	{ USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
+	{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
 	{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
+	{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
 	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
@@ -108,53 +114,70 @@ static struct usb_device_id id_table [] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver cp2101_driver = {
-	.name		= "cp2101",
+static struct usb_driver cp210x_driver = {
+	.name		= "cp210x",
 	.probe		= usb_serial_probe,
 	.disconnect	= usb_serial_disconnect,
 	.id_table	= id_table,
 	.no_dynamic_id	= 	1,
 };
 
-static struct usb_serial_driver cp2101_device = {
+static struct usb_serial_driver cp210x_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
-		.name = 	"cp2101",
+		.name = 	"cp210x",
 	},
-	.usb_driver		= &cp2101_driver,
+	.usb_driver		= &cp210x_driver,
 	.id_table		= id_table,
 	.num_ports		= 1,
-	.open			= cp2101_open,
-	.close			= cp2101_close,
-	.break_ctl		= cp2101_break_ctl,
-	.set_termios		= cp2101_set_termios,
-	.tiocmget 		= cp2101_tiocmget,
-	.tiocmset		= cp2101_tiocmset,
-	.attach			= cp2101_startup,
-	.shutdown		= cp2101_shutdown,
+	.open			= cp210x_open,
+	.close			= cp210x_close,
+	.break_ctl		= cp210x_break_ctl,
+	.set_termios		= cp210x_set_termios,
+	.tiocmget 		= cp210x_tiocmget,
+	.tiocmset		= cp210x_tiocmset,
+	.attach			= cp210x_startup,
+	.shutdown		= cp210x_shutdown,
 };
 
 /* Config request types */
 #define REQTYPE_HOST_TO_DEVICE	0x41
 #define REQTYPE_DEVICE_TO_HOST	0xc1
 
-/* Config SET requests. To GET, add 1 to the request number */
-#define CP2101_UART 		0x00	/* Enable / Disable */
-#define CP2101_BAUDRATE		0x01	/* (BAUD_RATE_GEN_FREQ / baudrate) */
-#define CP2101_BITS		0x03	/* 0x(0)(databits)(parity)(stopbits) */
-#define CP2101_BREAK		0x05	/* On / Off */
-#define CP2101_CONTROL		0x07	/* Flow control line states */
-#define CP2101_MODEMCTL		0x13	/* Modem controls */
-#define CP2101_CONFIG_6		0x19	/* 6 bytes of config data ??? */
-
-/* CP2101_UART */
+/* Config request codes */
+#define CP210X_IFC_ENABLE	0x00
+#define CP210X_SET_BAUDDIV	0x01
+#define CP210X_GET_BAUDDIV	0x02
+#define CP210X_SET_LINE_CTL	0x03
+#define CP210X_GET_LINE_CTL	0x04
+#define CP210X_SET_BREAK	0x05
+#define CP210X_IMM_CHAR		0x06
+#define CP210X_SET_MHS		0x07
+#define CP210X_GET_MDMSTS	0x08
+#define CP210X_SET_XON		0x09
+#define CP210X_SET_XOFF		0x0A
+#define CP210X_SET_EVENTMASK	0x0B
+#define CP210X_GET_EVENTMASK	0x0C
+#define CP210X_SET_CHAR		0x0D
+#define CP210X_GET_CHARS	0x0E
+#define CP210X_GET_PROPS	0x0F
+#define CP210X_GET_COMM_STATUS	0x10
+#define CP210X_RESET		0x11
+#define CP210X_PURGE		0x12
+#define CP210X_SET_FLOW		0x13
+#define CP210X_GET_FLOW		0x14
+#define CP210X_EMBED_EVENTS	0x15
+#define CP210X_GET_EVENTSTATE	0x16
+#define CP210X_SET_CHARS	0x19
+
+/* CP210X_IFC_ENABLE */
 #define UART_ENABLE		0x0001
 #define UART_DISABLE		0x0000
 
-/* CP2101_BAUDRATE */
+/* CP210X_(SET|GET)_BAUDDIV */
 #define BAUD_RATE_GEN_FREQ	0x384000
 
-/* CP2101_BITS */
+/* CP210X_(SET|GET)_LINE_CTL */
 #define BITS_DATA_MASK		0X0f00
 #define BITS_DATA_5		0X0500
 #define BITS_DATA_6		0X0600
@@ -174,11 +197,11 @@ static struct usb_serial_driver cp2101_device = {
 #define BITS_STOP_1_5		0x0001
 #define BITS_STOP_2		0x0002
 
-/* CP2101_BREAK */
+/* CP210X_SET_BREAK */
 #define BREAK_ON		0x0000
 #define BREAK_OFF		0x0001
 
-/* CP2101_CONTROL */
+/* CP210X_(SET_MHS|GET_MDMSTS) */
 #define CONTROL_DTR		0x0001
 #define CONTROL_RTS		0x0002
 #define CONTROL_CTS		0x0010
@@ -189,13 +212,13 @@ static struct usb_serial_driver cp2101_device = {
 #define CONTROL_WRITE_RTS	0x0200
 
 /*
- * cp2101_get_config
- * Reads from the CP2101 configuration registers
+ * cp210x_get_config
+ * Reads from the CP210x configuration registers
  * 'size' is specified in bytes.
  * 'data' is a pointer to a pre-allocated array of integers large
  * enough to hold 'size' bytes (with 4 bytes to each integer)
  */
-static int cp2101_get_config(struct usb_serial_port *port, u8 request,
+static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
@@ -211,9 +234,6 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request,
 		return -ENOMEM;
 	}
 
-	/* For get requests, the request number must be incremented */
-	request++;
-
 	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				request, REQTYPE_DEVICE_TO_HOST, 0x0000,
@@ -236,12 +256,12 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request,
 }
 
 /*
- * cp2101_set_config
- * Writes to the CP2101 configuration registers
+ * cp210x_set_config
+ * Writes to the CP210x configuration registers
  * Values less than 16 bits wide are sent directly
  * 'size' is specified in bytes.
  */
-static int cp2101_set_config(struct usb_serial_port *port, u8 request,
+static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
@@ -292,21 +312,21 @@ static int cp2101_set_config(struct usb_serial_port *port, u8 request,
 }
 
 /*
- * cp2101_set_config_single
- * Convenience function for calling cp2101_set_config on single data values
+ * cp210x_set_config_single
+ * Convenience function for calling cp210x_set_config on single data values
  * without requiring an integer pointer
  */
-static inline int cp2101_set_config_single(struct usb_serial_port *port,
+static inline int cp210x_set_config_single(struct usb_serial_port *port,
 		u8 request, unsigned int data)
 {
-	return cp2101_set_config(port, request, &data, 2);
+	return cp210x_set_config(port, request, &data, 2);
 }
 
 /*
- * cp2101_quantise_baudrate
+ * cp210x_quantise_baudrate
  * Quantises the baud rate as per AN205 Table 1
  */
-static unsigned int cp2101_quantise_baudrate(unsigned int baud) {
+static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
 	if      (baud <= 56)       baud = 0;
 	else if (baud <= 300)      baud = 300;
 	else if (baud <= 600)      baud = 600;
@@ -343,7 +363,7 @@ static unsigned int cp2101_quantise_baudrate(unsigned int baud) {
 	return baud;
 }
 
-static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port,
 				struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
@@ -351,7 +371,7 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) {
+	if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) {
 		dev_err(&port->dev, "%s - Unable to enable UART\n",
 				__func__);
 		return -EPROTO;
@@ -373,17 +393,17 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
 	}
 
 	/* Configure the termios structure */
-	cp2101_get_termios(tty, port);
+	cp210x_get_termios(tty, port);
 
 	/* Set the DTR and RTS pins low */
-	cp2101_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
+	cp210x_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
 			: port,
 		NULL, TIOCM_DTR | TIOCM_RTS, 0);
 
 	return 0;
 }
 
-static void cp2101_cleanup(struct usb_serial_port *port)
+static void cp210x_cleanup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 
@@ -398,8 +418,7 @@ static void cp2101_cleanup(struct usb_serial_port *port)
 	}
 }
 
-static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp)
+static void cp210x_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
@@ -410,23 +429,23 @@ static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port,
 
 	mutex_lock(&port->serial->disc_mutex);
 	if (!port->serial->disconnected)
-		cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
+		cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
 	mutex_unlock(&port->serial->disc_mutex);
 }
 
 /*
- * cp2101_get_termios
+ * cp210x_get_termios
  * Reads the baud rate, data bits, parity, stop bits and flow control mode
  * from the device, corrects any unsupported values, and configures the
  * termios structure to reflect the state of the device
  */
-static void cp2101_get_termios(struct tty_struct *tty,
+static void cp210x_get_termios(struct tty_struct *tty,
 	struct usb_serial_port *port)
 {
 	unsigned int baud;
 
 	if (tty) {
-		cp2101_get_termios_port(tty->driver_data,
+		cp210x_get_termios_port(tty->driver_data,
 			&tty->termios->c_cflag, &baud);
 		tty_encode_baud_rate(tty, baud, baud);
 	}
@@ -434,15 +453,15 @@ static void cp2101_get_termios(struct tty_struct *tty,
 	else {
 		unsigned int cflag;
 		cflag = 0;
-		cp2101_get_termios_port(port, &cflag, &baud);
+		cp210x_get_termios_port(port, &cflag, &baud);
 	}
 }
 
 /*
- * cp2101_get_termios_port
- * This is the heart of cp2101_get_termios which always uses a &usb_serial_port.
+ * cp210x_get_termios_port
+ * This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
  */
-static void cp2101_get_termios_port(struct usb_serial_port *port,
+static void cp210x_get_termios_port(struct usb_serial_port *port,
 	unsigned int *cflagp, unsigned int *baudp)
 {
 	unsigned int cflag, modem_ctl[4];
@@ -451,17 +470,17 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
+	cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2);
 	/* Convert to baudrate */
 	if (baud)
-		baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
+		baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
 
 	dbg("%s - baud rate = %d", __func__, baud);
 	*baudp = baud;
 
 	cflag = *cflagp;
 
-	cp2101_get_config(port, CP2101_BITS, &bits, 2);
+	cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 	cflag &= ~CSIZE;
 	switch (bits & BITS_DATA_MASK) {
 	case BITS_DATA_5:
@@ -486,14 +505,14 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 		cflag |= CS8;
 		bits &= ~BITS_DATA_MASK;
 		bits |= BITS_DATA_8;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	default:
 		dbg("%s - Unknown number of data bits, using 8", __func__);
 		cflag |= CS8;
 		bits &= ~BITS_DATA_MASK;
 		bits |= BITS_DATA_8;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	}
 
@@ -516,20 +535,20 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 				__func__);
 		cflag &= ~PARENB;
 		bits &= ~BITS_PARITY_MASK;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	case BITS_PARITY_SPACE:
 		dbg("%s - parity = SPACE (not supported, disabling parity)",
 				__func__);
 		cflag &= ~PARENB;
 		bits &= ~BITS_PARITY_MASK;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	default:
 		dbg("%s - Unknown parity mode, disabling parity", __func__);
 		cflag &= ~PARENB;
 		bits &= ~BITS_PARITY_MASK;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	}
 
@@ -542,7 +561,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 		dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)",
 								__func__);
 		bits &= ~BITS_STOP_MASK;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	case BITS_STOP_2:
 		dbg("%s - stop bits = 2", __func__);
@@ -552,11 +571,11 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 		dbg("%s - Unknown number of stop bits, using 1 stop bit",
 								__func__);
 		bits &= ~BITS_STOP_MASK;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	}
 
-	cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+	cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
 	if (modem_ctl[0] & 0x0008) {
 		dbg("%s - flow control = CRTSCTS", __func__);
 		cflag |= CRTSCTS;
@@ -568,7 +587,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 	*cflagp = cflag;
 }
 
-static void cp2101_set_termios(struct tty_struct *tty,
+static void cp210x_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	unsigned int cflag, old_cflag;
@@ -583,13 +602,13 @@ static void cp2101_set_termios(struct tty_struct *tty,
 	tty->termios->c_cflag &= ~CMSPAR;
 	cflag = tty->termios->c_cflag;
 	old_cflag = old_termios->c_cflag;
-	baud = cp2101_quantise_baudrate(tty_get_baud_rate(tty));
+	baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
 
 	/* If the baud rate is to be updated*/
 	if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
 		dbg("%s - Setting baud rate to %d baud", __func__,
 				baud);
-		if (cp2101_set_config_single(port, CP2101_BAUDRATE,
+		if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
 					((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
 			dbg("Baud rate requested not supported by device\n");
 			baud = tty_termios_baud_rate(old_termios);
@@ -600,7 +619,7 @@ static void cp2101_set_termios(struct tty_struct *tty,
 
 	/* If the number of data bits is to be updated */
 	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
-		cp2101_get_config(port, CP2101_BITS, &bits, 2);
+		cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 		bits &= ~BITS_DATA_MASK;
 		switch (cflag & CSIZE) {
 		case CS5:
@@ -624,19 +643,19 @@ static void cp2101_set_termios(struct tty_struct *tty,
 			dbg("%s - data bits = 9", __func__);
 			break;*/
 		default:
-			dbg("cp2101 driver does not "
+			dbg("cp210x driver does not "
 					"support the number of bits requested,"
 					" using 8 bit mode\n");
 				bits |= BITS_DATA_8;
 				break;
 		}
-		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
+		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
 			dbg("Number of data bits requested "
 					"not supported by device\n");
 	}
 
 	if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
-		cp2101_get_config(port, CP2101_BITS, &bits, 2);
+		cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 		bits &= ~BITS_PARITY_MASK;
 		if (cflag & PARENB) {
 			if (cflag & PARODD) {
@@ -647,13 +666,13 @@ static void cp2101_set_termios(struct tty_struct *tty,
 				dbg("%s - parity = EVEN", __func__);
 			}
 		}
-		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
+		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
 			dbg("Parity mode not supported "
 					"by device\n");
 	}
 
 	if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
-		cp2101_get_config(port, CP2101_BITS, &bits, 2);
+		cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 		bits &= ~BITS_STOP_MASK;
 		if (cflag & CSTOPB) {
 			bits |= BITS_STOP_2;
@@ -662,13 +681,13 @@ static void cp2101_set_termios(struct tty_struct *tty,
 			bits |= BITS_STOP_1;
 			dbg("%s - stop bits = 1", __func__);
 		}
-		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
+		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
 			dbg("Number of stop bits requested "
 					"not supported by device\n");
 	}
 
 	if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
-		cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+		cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
 		dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
 				__func__, modem_ctl[0], modem_ctl[1],
 				modem_ctl[2], modem_ctl[3]);
@@ -688,19 +707,19 @@ static void cp2101_set_termios(struct tty_struct *tty,
 		dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
 				__func__, modem_ctl[0], modem_ctl[1],
 				modem_ctl[2], modem_ctl[3]);
-		cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+		cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16);
 	}
 
 }
 
-static int cp2101_tiocmset (struct tty_struct *tty, struct file *file,
+static int cp210x_tiocmset (struct tty_struct *tty, struct file *file,
 		unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	return cp2101_tiocmset_port(port, file, set, clear);
+	return cp210x_tiocmset_port(port, file, set, clear);
 }
 
-static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file,
+static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file,
 		unsigned int set, unsigned int clear)
 {
 	unsigned int control = 0;
@@ -726,10 +745,10 @@ static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file,
 
 	dbg("%s - control = 0x%.4x", __func__, control);
 
-	return cp2101_set_config(port, CP2101_CONTROL, &control, 2);
+	return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
 }
 
-static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
+static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	unsigned int control;
@@ -737,7 +756,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	cp2101_get_config(port, CP2101_CONTROL, &control, 1);
+	cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
 
 	result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
 		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
@@ -751,7 +770,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static void cp2101_break_ctl (struct tty_struct *tty, int break_state)
+static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	unsigned int state;
@@ -763,17 +782,17 @@ static void cp2101_break_ctl (struct tty_struct *tty, int break_state)
 		state = BREAK_ON;
 	dbg("%s - turning break %s", __func__,
 			state == BREAK_OFF ? "off" : "on");
-	cp2101_set_config(port, CP2101_BREAK, &state, 2);
+	cp210x_set_config(port, CP210X_SET_BREAK, &state, 2);
 }
 
-static int cp2101_startup(struct usb_serial *serial)
+static int cp210x_startup(struct usb_serial *serial)
 {
-	/* CP2101 buffers behave strangely unless device is reset */
+	/* cp210x buffers behave strangely unless device is reset */
 	usb_reset_device(serial->dev);
 	return 0;
 }
 
-static void cp2101_shutdown(struct usb_serial *serial)
+static void cp210x_shutdown(struct usb_serial *serial)
 {
 	int i;
 
@@ -781,21 +800,21 @@ static void cp2101_shutdown(struct usb_serial *serial)
 
 	/* Stop reads and writes on all ports */
 	for (i = 0; i < serial->num_ports; ++i)
-		cp2101_cleanup(serial->port[i]);
+		cp210x_cleanup(serial->port[i]);
 }
 
-static int __init cp2101_init(void)
+static int __init cp210x_init(void)
 {
 	int retval;
 
-	retval = usb_serial_register(&cp2101_device);
+	retval = usb_serial_register(&cp210x_device);
 	if (retval)
 		return retval; /* Failed to register */
 
-	retval = usb_register(&cp2101_driver);
+	retval = usb_register(&cp210x_driver);
 	if (retval) {
 		/* Failed to register */
-		usb_serial_deregister(&cp2101_device);
+		usb_serial_deregister(&cp210x_device);
 		return retval;
 	}
 
@@ -805,14 +824,14 @@ static int __init cp2101_init(void)
 	return 0;
 }
 
-static void __exit cp2101_exit(void)
+static void __exit cp210x_exit(void)
 {
-	usb_deregister(&cp2101_driver);
-	usb_serial_deregister(&cp2101_device);
+	usb_deregister(&cp210x_driver);
+	usb_serial_deregister(&cp210x_device);
 }
 
-module_init(cp2101_init);
-module_exit(cp2101_exit);
+module_init(cp210x_init);
+module_exit(cp210x_exit);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index dd501bb63ed6..933ba913e66c 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -61,8 +61,7 @@ static int cyberjack_startup(struct usb_serial *serial);
 static void cyberjack_shutdown(struct usb_serial *serial);
 static int  cyberjack_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void cyberjack_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void cyberjack_close(struct usb_serial_port *port);
 static int cyberjack_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
 static int cyberjack_write_room(struct tty_struct *tty);
@@ -185,8 +184,7 @@ static int  cyberjack_open(struct tty_struct *tty,
 	return result;
 }
 
-static void cyberjack_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void cyberjack_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index e568710b263f..669f93848539 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -174,8 +174,8 @@ static int  cypress_ca42v2_startup(struct usb_serial *serial);
 static void cypress_shutdown(struct usb_serial *serial);
 static int  cypress_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void cypress_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void cypress_close(struct usb_serial_port *port);
+static void cypress_dtr_rts(struct usb_serial_port *port, int on);
 static int  cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
 static void cypress_send(struct usb_serial_port *port);
@@ -218,6 +218,7 @@ static struct usb_serial_driver cypress_earthmate_device = {
 	.shutdown =			cypress_shutdown,
 	.open =				cypress_open,
 	.close =			cypress_close,
+	.dtr_rts =			cypress_dtr_rts,
 	.write =			cypress_write,
 	.write_room =			cypress_write_room,
 	.ioctl =			cypress_ioctl,
@@ -244,6 +245,7 @@ static struct usb_serial_driver cypress_hidcom_device = {
 	.shutdown =			cypress_shutdown,
 	.open =				cypress_open,
 	.close =			cypress_close,
+	.dtr_rts =			cypress_dtr_rts,
 	.write =			cypress_write,
 	.write_room =			cypress_write_room,
 	.ioctl =			cypress_ioctl,
@@ -270,6 +272,7 @@ static struct usb_serial_driver cypress_ca42v2_device = {
 	.shutdown =			cypress_shutdown,
 	.open =				cypress_open,
 	.close =			cypress_close,
+	.dtr_rts =			cypress_dtr_rts,
 	.write =			cypress_write,
 	.write_room =			cypress_write_room,
 	.ioctl =			cypress_ioctl,
@@ -656,11 +659,7 @@ static int cypress_open(struct tty_struct *tty,
 	priv->rx_flags = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* raise both lines and set termios */
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->line_control = CONTROL_DTR | CONTROL_RTS;
-	priv->cmd_ctrl = 1;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	/* Set termios */
 	result = cypress_write(tty, port, NULL, 0);
 
 	if (result) {
@@ -694,76 +693,42 @@ static int cypress_open(struct tty_struct *tty,
 							__func__, result);
 		cypress_set_dead(port);
 	}
-
+	port->port.drain_delay = 256;
 	return result;
 } /* cypress_open */
 
+static void cypress_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+	/* drop dtr and rts */
+	priv = usb_get_serial_port_data(port);
+	spin_lock_irq(&priv->lock);
+	if (on == 0)
+		priv->line_control = 0;
+	else 
+		priv->line_control = CONTROL_DTR | CONTROL_RTS;
+	priv->cmd_ctrl = 1;
+	spin_unlock_irq(&priv->lock);
+	cypress_write(NULL, port, NULL, 0);
+}
 
-static void cypress_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void cypress_close(struct usb_serial_port *port)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
-	unsigned int c_cflag;
-	int bps;
-	long timeout;
-	wait_queue_t wait;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* wait for data to drain from buffer */
-	spin_lock_irq(&priv->lock);
-	timeout = CYPRESS_CLOSING_WAIT;
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&tty->write_wait, &wait);
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (cypress_buf_data_avail(priv->buf) == 0
-		|| timeout == 0 || signal_pending(current)
-		/* without mutex, allowed due to harmless failure mode */
-		|| port->serial->disconnected)
-			break;
-		spin_unlock_irq(&priv->lock);
-		timeout = schedule_timeout(timeout);
-		spin_lock_irq(&priv->lock);
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&tty->write_wait, &wait);
-	/* clear out any remaining data in the buffer */
-	cypress_buf_clear(priv->buf);
-	spin_unlock_irq(&priv->lock);
-
 	/* writing is potentially harmful, lock must be taken */
 	mutex_lock(&port->serial->disc_mutex);
 	if (port->serial->disconnected) {
 		mutex_unlock(&port->serial->disc_mutex);
 		return;
 	}
-	/* wait for characters to drain from device */
-	if (tty) {
-		bps = tty_get_baud_rate(tty);
-		if (bps > 1200)
-			timeout = max((HZ * 2560) / bps, HZ / 10);
-		else
-			timeout = 2 * HZ;
-		schedule_timeout_interruptible(timeout);
-	}
-
+	cypress_buf_clear(priv->buf);
 	dbg("%s - stopping urbs", __func__);
 	usb_kill_urb(port->interrupt_in_urb);
 	usb_kill_urb(port->interrupt_out_urb);
 
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		if (c_cflag & HUPCL) {
-			/* drop dtr and rts */
-			priv = usb_get_serial_port_data(port);
-			spin_lock_irq(&priv->lock);
-			priv->line_control = 0;
-			priv->cmd_ctrl = 1;
-			spin_unlock_irq(&priv->lock);
-			cypress_write(tty, port, NULL, 0);
-		}
-	}
 
 	if (stats)
 		dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 38ba4ea8b6bf..30f5140eff03 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -422,7 +422,6 @@ struct digi_port {
 	int dp_throttled;
 	int dp_throttle_restart;
 	wait_queue_head_t dp_flush_wait;
-	int dp_in_close;			/* close in progress */
 	wait_queue_head_t dp_close_wait;	/* wait queue for close */
 	struct work_struct dp_wakeup_work;
 	struct usb_serial_port *dp_port;
@@ -456,8 +455,9 @@ static int digi_write_room(struct tty_struct *tty);
 static int digi_chars_in_buffer(struct tty_struct *tty);
 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 	struct file *filp);
-static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
-	struct file *filp);
+static void digi_close(struct usb_serial_port *port);
+static int digi_carrier_raised(struct usb_serial_port *port);
+static void digi_dtr_rts(struct usb_serial_port *port, int on);
 static int digi_startup_device(struct usb_serial *serial);
 static int digi_startup(struct usb_serial *serial);
 static void digi_shutdown(struct usb_serial *serial);
@@ -510,6 +510,8 @@ static struct usb_serial_driver digi_acceleport_2_device = {
 	.num_ports =			3,
 	.open =				digi_open,
 	.close =			digi_close,
+	.dtr_rts =			digi_dtr_rts,
+	.carrier_raised =		digi_carrier_raised,
 	.write =			digi_write,
 	.write_room =			digi_write_room,
 	.write_bulk_callback = 		digi_write_bulk_callback,
@@ -1328,6 +1330,19 @@ static int digi_chars_in_buffer(struct tty_struct *tty)
 
 }
 
+static void digi_dtr_rts(struct usb_serial_port *port, int on)
+{
+	/* Adjust DTR and RTS */
+	digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1);
+}
+
+static int digi_carrier_raised(struct usb_serial_port *port)
+{
+	struct digi_port *priv = usb_get_serial_port_data(port);
+	if (priv->dp_modem_signals & TIOCM_CD)
+		return 1;
+	return 0;
+}
 
 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 				struct file *filp)
@@ -1336,7 +1351,6 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 	unsigned char buf[32];
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	struct ktermios not_termios;
-	unsigned long flags = 0;
 
 	dbg("digi_open: TOP: port=%d, open_count=%d",
 		priv->dp_port_num, port->port.count);
@@ -1345,26 +1359,6 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 	if (digi_startup_device(port->serial) != 0)
 		return -ENXIO;
 
-	spin_lock_irqsave(&priv->dp_port_lock, flags);
-
-	/* don't wait on a close in progress for non-blocking opens */
-	if (priv->dp_in_close && (filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) {
-		spin_unlock_irqrestore(&priv->dp_port_lock, flags);
-		return -EAGAIN;
-	}
-
-	/* wait for a close in progress to finish */
-	while (priv->dp_in_close) {
-		cond_wait_interruptible_timeout_irqrestore(
-			&priv->dp_close_wait, DIGI_RETRY_TIMEOUT,
-			&priv->dp_port_lock, flags);
-		if (signal_pending(current))
-			return -EINTR;
-		spin_lock_irqsave(&priv->dp_port_lock, flags);
-	}
-
-	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
-
 	/* read modem signals automatically whenever they change */
 	buf[0] = DIGI_CMD_READ_INPUT_SIGNALS;
 	buf[1] = priv->dp_port_num;
@@ -1387,16 +1381,11 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 		not_termios.c_iflag = ~tty->termios->c_iflag;
 		digi_set_termios(tty, port, &not_termios);
 	}
-
-	/* set DTR and RTS */
-	digi_set_modem_signals(port, TIOCM_DTR|TIOCM_RTS, 1);
-
 	return 0;
 }
 
 
-static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static void digi_close(struct usb_serial_port *port)
 {
 	DEFINE_WAIT(wait);
 	int ret;
@@ -1411,28 +1400,9 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
 	if (port->serial->disconnected)
 		goto exit;
 
-	/* do cleanup only after final close on this port */
-	spin_lock_irq(&priv->dp_port_lock);
-	priv->dp_in_close = 1;
-	spin_unlock_irq(&priv->dp_port_lock);
-
-	/* tell line discipline to process only XON/XOFF */
-	tty->closing = 1;
-
-	/* wait for output to drain */
-	if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0)
-		tty_wait_until_sent(tty, DIGI_CLOSE_TIMEOUT);
-
-	/* flush driver and line discipline buffers */
-	tty_driver_flush_buffer(tty);
-	tty_ldisc_flush(tty);
-
 	if (port->serial->dev) {
-		/* wait for transmit idle */
-		if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0)
-			digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
-		/* drop DTR and RTS */
-		digi_set_modem_signals(port, 0, 0);
+		/* FIXME: Transmit idle belongs in the wait_unti_sent path */
+		digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
 
 		/* disable input flow control */
 		buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
@@ -1477,11 +1447,9 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
 		/* shutdown any outstanding bulk writes */
 		usb_kill_urb(port->write_urb);
 	}
-	tty->closing = 0;
 exit:
 	spin_lock_irq(&priv->dp_port_lock);
 	priv->dp_write_urb_in_use = 0;
-	priv->dp_in_close = 0;
 	wake_up_interruptible(&priv->dp_close_wait);
 	spin_unlock_irq(&priv->dp_port_lock);
 	mutex_unlock(&port->serial->disc_mutex);
@@ -1560,7 +1528,6 @@ static int digi_startup(struct usb_serial *serial)
 		priv->dp_throttled = 0;
 		priv->dp_throttle_restart = 0;
 		init_waitqueue_head(&priv->dp_flush_wait);
-		priv->dp_in_close = 0;
 		init_waitqueue_head(&priv->dp_close_wait);
 		INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
 		priv->dp_port = serial->port[i];
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index c709ec474a80..2b141ccb0cd9 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -81,8 +81,7 @@ static int debug;
 /* function prototypes for an empeg-car player */
 static int  empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
 						struct file *filp);
-static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
-						struct file *filp);
+static void empeg_close(struct usb_serial_port *port);
 static int  empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
 						const unsigned char *buf,
 						int count);
@@ -181,8 +180,7 @@ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
 }
 
 
-static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static void empeg_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index d9fcdaedf389..683304d60615 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -89,6 +89,7 @@ struct ftdi_private {
 	int force_rtscts;	/* if non-zero, force RTS-CTS to always
 				   be enabled */
 
+	unsigned int latency;		/* latency setting in use */
 	spinlock_t tx_lock;	/* spinlock for transmit state */
 	unsigned long tx_bytes;
 	unsigned long tx_outstanding_bytes;
@@ -719,8 +720,8 @@ static int  ftdi_sio_port_probe(struct usb_serial_port *port);
 static int  ftdi_sio_port_remove(struct usb_serial_port *port);
 static int  ftdi_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void ftdi_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void ftdi_close(struct usb_serial_port *port);
+static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
 static int  ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
 static int  ftdi_write_room(struct tty_struct *tty);
@@ -758,6 +759,7 @@ static struct usb_serial_driver ftdi_sio_device = {
 	.port_remove =		ftdi_sio_port_remove,
 	.open =			ftdi_open,
 	.close =		ftdi_close,
+	.dtr_rts =		ftdi_dtr_rts,
 	.throttle =		ftdi_throttle,
 	.unthrottle =		ftdi_unthrottle,
 	.write =		ftdi_write,
@@ -1037,7 +1039,54 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
 	return rv;
 }
 
+static int write_latency_timer(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *udev = port->serial->dev;
+	char buf[1];
+	int rv = 0;
+	int l = priv->latency;
+
+	if (priv->flags & ASYNC_LOW_LATENCY)
+		l = 1;
+
+	dbg("%s: setting latency timer = %i", __func__, l);
+
+	rv = usb_control_msg(udev,
+			     usb_sndctrlpipe(udev, 0),
+			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+			     l, priv->interface,
+			     buf, 0, WDR_TIMEOUT);
+
+	if (rv < 0)
+		dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
+	return rv;
+}
+
+static int read_latency_timer(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *udev = port->serial->dev;
+	unsigned short latency = 0;
+	int rv = 0;
+
 
+	dbg("%s", __func__);
+
+	rv = usb_control_msg(udev,
+			     usb_rcvctrlpipe(udev, 0),
+			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
+			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
+			     0, priv->interface,
+			     (char *) &latency, 1, WDR_TIMEOUT);
+
+	if (rv < 0) {
+		dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
+		return -EIO;
+	}
+	return latency;
+}
 
 static int get_serial_info(struct usb_serial_port *port,
 				struct serial_struct __user *retinfo)
@@ -1097,6 +1146,7 @@ static int set_serial_info(struct tty_struct *tty,
 	priv->custom_divisor = new_serial.custom_divisor;
 
 	tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	write_latency_timer(port);
 
 check_and_exit:
 	if ((old_priv.flags & ASYNC_SPD_MASK) !=
@@ -1192,27 +1242,13 @@ static ssize_t show_latency_timer(struct device *dev,
 {
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	struct usb_device *udev = port->serial->dev;
-	unsigned short latency = 0;
-	int rv = 0;
-
-
-	dbg("%s", __func__);
-
-	rv = usb_control_msg(udev,
-			     usb_rcvctrlpipe(udev, 0),
-			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
-			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
-			     0, priv->interface,
-			     (char *) &latency, 1, WDR_TIMEOUT);
-
-	if (rv < 0) {
-		dev_err(dev, "Unable to read latency timer: %i\n", rv);
-		return -EIO;
-	}
-	return sprintf(buf, "%i\n", latency);
+	if (priv->flags & ASYNC_LOW_LATENCY)
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "%i\n", priv->latency);
 }
 
+
 /* Write a new value of the latency timer, in units of milliseconds. */
 static ssize_t store_latency_timer(struct device *dev,
 			struct device_attribute *attr, const char *valbuf,
@@ -1220,25 +1256,13 @@ static ssize_t store_latency_timer(struct device *dev,
 {
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	struct usb_device *udev = port->serial->dev;
-	char buf[1];
 	int v = simple_strtoul(valbuf, NULL, 10);
 	int rv = 0;
 
-	dbg("%s: setting latency timer = %i", __func__, v);
-
-	rv = usb_control_msg(udev,
-			     usb_sndctrlpipe(udev, 0),
-			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
-			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
-			     v, priv->interface,
-			     buf, 0, WDR_TIMEOUT);
-
-	if (rv < 0) {
-		dev_err(dev, "Unable to write latency timer: %i\n", rv);
+	priv->latency = v;
+	rv = write_latency_timer(port);
+	if (rv < 0)
 		return -EIO;
-	}
-
 	return count;
 }
 
@@ -1392,6 +1416,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	usb_set_serial_port_data(port, priv);
 
 	ftdi_determine_type(port);
+	read_latency_timer(port);
 	create_sysfs_attrs(port);
 	return 0;
 }
@@ -1514,6 +1539,8 @@ static int ftdi_open(struct tty_struct *tty,
 	if (tty)
 		tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
+	write_latency_timer(port);
+
 	/* No error checking for this (will get errors later anyway) */
 	/* See ftdi_sio.h for description of what is reset */
 	usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -1529,11 +1556,6 @@ static int ftdi_open(struct tty_struct *tty,
 	if (tty)
 		ftdi_set_termios(tty, port, tty->termios);
 
-	/* FIXME: Flow control might be enabled, so it should be checked -
-	   we have no control of defaults! */
-	/* Turn on RTS and DTR since we are not flow controlling by default */
-	set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
-
 	/* Not throttled */
 	spin_lock_irqsave(&priv->rx_lock, flags);
 	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
@@ -1558,6 +1580,30 @@ static int ftdi_open(struct tty_struct *tty,
 } /* ftdi_open */
 
 
+static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	char buf[1];
+
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected) {
+		/* Disable flow control */
+		if (!on && usb_control_msg(port->serial->dev,
+			    usb_sndctrlpipe(port->serial->dev, 0),
+			    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
+			    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
+			    0, priv->interface, buf, 0,
+			    WDR_TIMEOUT) < 0) {
+			    dev_err(&port->dev, "error from flowcontrol urb\n");
+		}
+		/* drop RTS and DTR */
+		if (on)
+			set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+		else
+			clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+	}
+	mutex_unlock(&port->serial->disc_mutex);
+}
 
 /*
  * usbserial:__serial_close  only calls ftdi_close if the point is open
@@ -1567,31 +1613,12 @@ static int ftdi_open(struct tty_struct *tty,
  *
  */
 
-static void ftdi_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void ftdi_close(struct usb_serial_port *port)
 { /* ftdi_close */
-	unsigned int c_cflag = tty->termios->c_cflag;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	char buf[1];
 
 	dbg("%s", __func__);
 
-	mutex_lock(&port->serial->disc_mutex);
-	if (c_cflag & HUPCL && !port->serial->disconnected) {
-		/* Disable flow control */
-		if (usb_control_msg(port->serial->dev,
-				    usb_sndctrlpipe(port->serial->dev, 0),
-				    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
-				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
-				    0, priv->interface, buf, 0,
-				    WDR_TIMEOUT) < 0) {
-			dev_err(&port->dev, "error from flowcontrol urb\n");
-		}
-
-		/* drop RTS and DTR */
-		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
-	} /* Note change no line if hupcl is off */
-	mutex_unlock(&port->serial->disc_mutex);
 
 	/* cancel any scheduled reading */
 	cancel_delayed_work_sync(&priv->rx_work);
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 586d30ff450b..ee25a3fe3b09 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -993,8 +993,7 @@ static int garmin_open(struct tty_struct *tty,
 }
 
 
-static void garmin_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void garmin_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 4cec9906ccf3..be82ea956720 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -184,8 +184,7 @@ int usb_serial_generic_resume(struct usb_serial *serial)
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_resume);
 
-void usb_serial_generic_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+void usb_serial_generic_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 	generic_cleanup(port);
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index fb4a73d090f6..53ef5996e33d 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -207,8 +207,7 @@ static void edge_bulk_out_cmd_callback(struct urb *urb);
 /* function prototypes for the usbserial callbacks */
 static int edge_open(struct tty_struct *tty, struct usb_serial_port *port,
 					struct file *filp);
-static void edge_close(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp);
+static void edge_close(struct usb_serial_port *port);
 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
 static int edge_write_room(struct tty_struct *tty);
@@ -965,7 +964,7 @@ static int edge_open(struct tty_struct *tty,
 
 	if (!edge_port->txfifo.fifo) {
 		dbg("%s - no memory", __func__);
-		edge_close(tty, port, filp);
+		edge_close(port);
 		return -ENOMEM;
 	}
 
@@ -975,7 +974,7 @@ static int edge_open(struct tty_struct *tty,
 
 	if (!edge_port->write_urb) {
 		dbg("%s - no memory", __func__);
-		edge_close(tty, port, filp);
+		edge_close(port);
 		return -ENOMEM;
 	}
 
@@ -1099,8 +1098,7 @@ static void block_until_tx_empty(struct edgeport_port *edge_port)
  * edge_close
  *	this function is called by the tty driver when a port is closed
  *****************************************************************************/
-static void edge_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void edge_close(struct usb_serial_port *port)
 {
 	struct edgeport_serial *edge_serial;
 	struct edgeport_port *edge_port;
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 513b25e044c1..eabf20eeb370 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2009,8 +2009,7 @@ release_es_lock:
 	return status;
 }
 
-static void edge_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void edge_close(struct usb_serial_port *port)
 {
 	struct edgeport_serial *edge_serial;
 	struct edgeport_port *edge_port;
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index cd62825a9ac3..c610a99fa477 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -76,8 +76,7 @@ static int initial_wait;
 /* Function prototypes for an ipaq */
 static int  ipaq_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void ipaq_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void ipaq_close(struct usb_serial_port *port);
 static int  ipaq_calc_num_ports(struct usb_serial *serial);
 static int  ipaq_startup(struct usb_serial *serial);
 static void ipaq_shutdown(struct usb_serial *serial);
@@ -714,8 +713,7 @@ error:
 }
 
 
-static void ipaq_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void ipaq_close(struct usb_serial_port *port)
 {
 	struct ipaq_private	*priv = usb_get_serial_port_data(port);
 
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index da2a2b46644a..29ad038b9c8d 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -302,23 +302,17 @@ static int ipw_open(struct tty_struct *tty,
 	return 0;
 }
 
-static void ipw_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void ipw_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct usb_device *dev = port->serial->dev;
 	int result;
 
-	if (tty_hung_up_p(filp)) {
-		dbg("%s: tty_hung_up_p ...", __func__);
-		return;
-	}
-
 	/*--1: drop the dtr */
 	dbg("%s:dropping dtr", __func__);
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			 IPW_SIO_SET_PIN,
 			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-			 IPW_PIN_CLRDTR,
+			 on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR,
 			 0,
 			 NULL,
 			 0,
@@ -332,7 +326,7 @@ static void ipw_close(struct tty_struct *tty,
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			 IPW_SIO_SET_PIN, USB_TYPE_VENDOR |
 			 		USB_RECIP_INTERFACE | USB_DIR_OUT,
-			 IPW_PIN_CLRRTS,
+			 on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS,
 			 0,
 			 NULL,
 			 0,
@@ -340,7 +334,12 @@ static void ipw_close(struct tty_struct *tty,
 	if (result < 0)
 		dev_err(&port->dev,
 				"dropping rts failed (error = %d)\n", result);
+}
 
+static void ipw_close(struct usb_serial_port *port)
+{
+	struct usb_device *dev = port->serial->dev;
+	int result;
 
 	/*--3: purge */
 	dbg("%s:sending purge", __func__);
@@ -461,6 +460,7 @@ static struct usb_serial_driver ipw_device = {
 	.num_ports =		1,
 	.open =			ipw_open,
 	.close =		ipw_close,
+	.dtr_rts =		ipw_dtr_rts,
 	.port_probe = 		ipw_probe,
 	.port_remove =		ipw_disconnect,
 	.write =		ipw_write,
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 4e2cda93da59..66009b6b763a 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -88,8 +88,7 @@ static int xbof = -1;
 static int  ir_startup (struct usb_serial *serial);
 static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port,
 					struct file *filep);
-static void ir_close(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filep);
+static void ir_close(struct usb_serial_port *port);
 static int  ir_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
 static void ir_write_bulk_callback (struct urb *urb);
@@ -346,8 +345,7 @@ static int ir_open(struct tty_struct *tty,
 	return result;
 }
 
-static void ir_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file * filp)
+static void ir_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 4473d442b2aa..76a3cc327bb9 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -40,7 +40,7 @@ static int debug;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.5"
+#define DRIVER_VERSION "v0.10"
 #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
 
 static struct usb_device_id id_table[] = {
@@ -70,7 +70,6 @@ static void read_rxcmd_callback(struct urb *urb);
 struct iuu_private {
 	spinlock_t lock;	/* store irq state */
 	wait_queue_head_t delta_msr_wait;
-	u8 line_control;
 	u8 line_status;
 	u8 termios_initialized;
 	int tiostatus;		/* store IUART SIGNAL for tiocmget call */
@@ -651,32 +650,33 @@ static int iuu_bulk_write(struct usb_serial_port *port)
 	unsigned long flags;
 	int result;
 	int i;
+	int buf_len;
 	char *buf_ptr = port->write_urb->transfer_buffer;
 	dbg("%s - enter", __func__);
 
+	spin_lock_irqsave(&priv->lock, flags);
 	*buf_ptr++ = IUU_UART_ESC;
 	*buf_ptr++ = IUU_UART_TX;
 	*buf_ptr++ = priv->writelen;
 
-	memcpy(buf_ptr, priv->writebuf,
-	       priv->writelen);
+	memcpy(buf_ptr, priv->writebuf, priv->writelen);
+	buf_len = priv->writelen;
+	priv->writelen = 0;
+	spin_unlock_irqrestore(&priv->lock, flags);
 	if (debug == 1) {
-		for (i = 0; i < priv->writelen; i++)
+		for (i = 0; i < buf_len; i++)
 			sprintf(priv->dbgbuf + i*2 ,
 				"%02X", priv->writebuf[i]);
-		priv->dbgbuf[priv->writelen+i*2] = 0;
+		priv->dbgbuf[buf_len+i*2] = 0;
 		dbg("%s - writing %i chars : %s", __func__,
-		    priv->writelen, priv->dbgbuf);
+		    buf_len, priv->dbgbuf);
 	}
 	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
 			  usb_sndbulkpipe(port->serial->dev,
 					  port->bulk_out_endpointAddress),
-			  port->write_urb->transfer_buffer, priv->writelen + 3,
+			  port->write_urb->transfer_buffer, buf_len + 3,
 			  iuu_rxcmd, port);
 	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->writelen = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
 	usb_serial_port_softint(port);
 	return result;
 }
@@ -770,14 +770,10 @@ static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port,
 		return -ENOMEM;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	if (priv->writelen > 0) {
-		/* buffer already filled but not commited */
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return 0;
-	}
+
 	/* fill the buffer */
-	memcpy(priv->writebuf, buf, count);
-	priv->writelen = count;
+	memcpy(priv->writebuf + priv->writelen, buf, count);
+	priv->writelen += count;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return count;
@@ -819,7 +815,7 @@ static int iuu_uart_on(struct usb_serial_port *port)
 	buf[0] = IUU_UART_ENABLE;
 	buf[1] = (u8) ((IUU_BAUD_9600 >> 8) & 0x00FF);
 	buf[2] = (u8) (0x00FF & IUU_BAUD_9600);
-	buf[3] = (u8) (0x0F0 & IUU_TWO_STOP_BITS) | (0x07 & IUU_PARITY_EVEN);
+	buf[3] = (u8) (0x0F0 & IUU_ONE_STOP_BIT) | (0x07 & IUU_PARITY_EVEN);
 
 	status = bulk_immediate(port, buf, 4);
 	if (status != IUU_OPERATION_OK) {
@@ -946,19 +942,59 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud,
 	return status;
 }
 
-static int set_control_lines(struct usb_device *dev, u8 value)
+static void iuu_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	return 0;
+	const u32 supported_mask = CMSPAR|PARENB|PARODD;
+
+	unsigned int cflag = tty->termios->c_cflag;
+	int status;
+	u32 actual;
+	u32 parity;
+	int csize = CS7;
+	int baud = 9600;	/* Fixed for the moment */
+	u32 newval = cflag & supported_mask;
+
+	/* compute the parity parameter */
+	parity = 0;
+	if (cflag & CMSPAR) {	/* Using mark space */
+		if (cflag & PARODD)
+			parity |= IUU_PARITY_SPACE;
+		else
+			parity |= IUU_PARITY_MARK;
+	} else if (!(cflag & PARENB)) {
+		parity |= IUU_PARITY_NONE;
+		csize = CS8;
+	} else if (cflag & PARODD)
+		parity |= IUU_PARITY_ODD;
+	else
+		parity |= IUU_PARITY_EVEN;
+
+	parity |= (cflag & CSTOPB ? IUU_TWO_STOP_BITS : IUU_ONE_STOP_BIT);
+
+	/* set it */
+	status = iuu_uart_baud(port,
+			(clockmode == 2) ? 16457 : 9600 * boost / 100,
+			&actual, parity);
+
+	/* set the termios value to the real one, so the user now what has
+	 * changed. We support few fields so its easies to copy the old hw
+	 * settings back over and then adjust them
+	 */
+ 	if (old_termios)
+ 		tty_termios_copy_hw(tty->termios, old_termios);
+	if (status != 0)	/* Set failed - return old bits */
+		return;
+	/* Re-encode speed, parity and csize */
+	tty_encode_baud_rate(tty, baud, baud);
+	tty->termios->c_cflag &= ~(supported_mask|CSIZE);
+	tty->termios->c_cflag |= newval | csize;
 }
 
-static void iuu_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void iuu_close(struct usb_serial_port *port)
 {
 	/* iuu_led (port,255,0,0,0); */
 	struct usb_serial *serial;
-	struct iuu_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-	unsigned int c_cflag;
 
 	serial = port->serial;
 	if (!serial)
@@ -968,17 +1004,6 @@ static void iuu_close(struct tty_struct *tty,
 
 	iuu_uart_off(port);
 	if (serial->dev) {
-		if (tty) {
-			c_cflag = tty->termios->c_cflag;
-			if (c_cflag & HUPCL) {
-				/* drop DTR and RTS */
-				priv = usb_get_serial_port_data(port);
-				spin_lock_irqsave(&priv->lock, flags);
-				priv->line_control = 0;
-				spin_unlock_irqrestore(&priv->lock, flags);
-				set_control_lines(port->serial->dev, 0);
-			}
-		}
 		/* free writebuf */
 		/* shutdown our urbs */
 		dbg("%s - shutting down urbs", __func__);
@@ -1154,7 +1179,7 @@ static int iuu_open(struct tty_struct *tty,
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting read urb,"
 			" error %d\n", __func__, result);
-		iuu_close(tty, port, NULL);
+		iuu_close(port);
 		return -EPROTO;
 	} else {
 		dbg("%s - rxcmd OK", __func__);
@@ -1175,6 +1200,7 @@ static struct usb_serial_driver iuu_device = {
 	.read_bulk_callback = iuu_uart_read_callback,
 	.tiocmget = iuu_tiocmget,
 	.tiocmset = iuu_tiocmset,
+	.set_termios = iuu_set_termios,
 	.attach = iuu_startup,
 	.shutdown = iuu_shutdown,
 };
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 00daa8f7759a..f1195a98f316 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1298,8 +1298,16 @@ static inline void stop_urb(struct urb *urb)
 		usb_kill_urb(urb);
 }
 
-static void keyspan_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void keyspan_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
+
+	p_priv->rts_state = on;
+	p_priv->dtr_state = on;
+	keyspan_send_setup(port, 0);
+}
+
+static void keyspan_close(struct usb_serial_port *port)
 {
 	int			i;
 	struct usb_serial	*serial = port->serial;
@@ -1336,7 +1344,6 @@ static void keyspan_close(struct tty_struct *tty,
 			stop_urb(p_priv->out_urbs[i]);
 		}
 	}
-	tty_port_tty_set(&port->port, NULL);
 }
 
 /* download the firmware to a pre-renumeration device */
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 38b4582e0734..0d4569b60768 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -38,9 +38,8 @@
 static int  keyspan_open		(struct tty_struct *tty,
 					 struct usb_serial_port *port,
 					 struct file *filp);
-static void keyspan_close		(struct tty_struct *tty,
-					 struct usb_serial_port *port,
-					 struct file *filp);
+static void keyspan_close		(struct usb_serial_port *port);
+static void keyspan_dtr_rts		(struct usb_serial_port *port, int on);
 static int  keyspan_startup		(struct usb_serial *serial);
 static void keyspan_shutdown		(struct usb_serial *serial);
 static int  keyspan_write_room		(struct tty_struct *tty);
@@ -562,6 +561,7 @@ static struct usb_serial_driver keyspan_1port_device = {
 	.num_ports		= 1,
 	.open			= keyspan_open,
 	.close			= keyspan_close,
+	.dtr_rts		= keyspan_dtr_rts,
 	.write			= keyspan_write,
 	.write_room		= keyspan_write_room,
 	.set_termios		= keyspan_set_termios,
@@ -582,6 +582,7 @@ static struct usb_serial_driver keyspan_2port_device = {
 	.num_ports		= 2,
 	.open			= keyspan_open,
 	.close			= keyspan_close,
+	.dtr_rts		= keyspan_dtr_rts,
 	.write			= keyspan_write,
 	.write_room		= keyspan_write_room,
 	.set_termios		= keyspan_set_termios,
@@ -602,6 +603,7 @@ static struct usb_serial_driver keyspan_4port_device = {
 	.num_ports		= 4,
 	.open			= keyspan_open,
 	.close			= keyspan_close,
+	.dtr_rts		= keyspan_dtr_rts,
 	.write			= keyspan_write,
 	.write_room		= keyspan_write_room,
 	.set_termios		= keyspan_set_termios,
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index bf1ae247da66..ab769dbea1b3 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -651,6 +651,35 @@ static int keyspan_pda_chars_in_buffer(struct tty_struct *tty)
 }
 
 
+static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_serial *serial = port->serial;
+
+	if (serial->dev) {
+		if (on)
+			keyspan_pda_set_modem_info(serial, (1<<7) | (1<< 2));
+		else
+			keyspan_pda_set_modem_info(serial, 0);
+	}
+}
+
+static int keyspan_pda_carrier_raised(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	unsigned char modembits;
+
+	/* If we can read the modem status and the DCD is low then
+	   carrier is not raised yet */
+	if (keyspan_pda_get_modem_info(serial, &modembits) >= 0) {
+		if (!(modembits & (1>>6)))
+			return 0;
+	}
+	/* Carrier raised, or we failed (eg disconnected) so
+	   progress accordingly */
+	return 1;
+}
+
+
 static int keyspan_pda_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp)
 {
@@ -682,13 +711,6 @@ static int keyspan_pda_open(struct tty_struct *tty,
 	priv->tx_room = room;
 	priv->tx_throttled = room ? 0 : 1;
 
-	/* the normal serial device seems to always turn on DTR and RTS here,
-	   so do the same */
-	if (tty && (tty->termios->c_cflag & CBAUD))
-		keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2));
-	else
-		keyspan_pda_set_modem_info(serial, 0);
-
 	/*Start reading from the device*/
 	port->interrupt_in_urb->dev = serial->dev;
 	rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
@@ -700,19 +722,11 @@ static int keyspan_pda_open(struct tty_struct *tty,
 error:
 	return rc;
 }
-
-
-static void keyspan_pda_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void keyspan_pda_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 
 	if (serial->dev) {
-		/* the normal serial device seems to always shut
-		   off DTR and RTS now */
-		if (tty->termios->c_cflag & HUPCL)
-			keyspan_pda_set_modem_info(serial, 0);
-
 		/* shutdown our bulk reads and writes */
 		usb_kill_urb(port->write_urb);
 		usb_kill_urb(port->interrupt_in_urb);
@@ -839,6 +853,8 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.usb_driver = 		&keyspan_pda_driver,
 	.id_table =		id_table_std,
 	.num_ports =		1,
+	.dtr_rts =		keyspan_pda_dtr_rts,
+	.carrier_raised	=	keyspan_pda_carrier_raised,
 	.open =			keyspan_pda_open,
 	.close =		keyspan_pda_close,
 	.write =		keyspan_pda_write,
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index fcd9082f3e7f..fa817c66b3e8 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -76,8 +76,7 @@ static int  klsi_105_startup(struct usb_serial *serial);
 static void klsi_105_shutdown(struct usb_serial *serial);
 static int  klsi_105_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void klsi_105_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void klsi_105_close(struct usb_serial_port *port);
 static int  klsi_105_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
 static void klsi_105_write_bulk_callback(struct urb *urb);
@@ -447,8 +446,7 @@ exit:
 } /* klsi_105_open */
 
 
-static void klsi_105_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void klsi_105_close(struct usb_serial_port *port)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int rc;
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index c148544953b3..6b570498287f 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -72,8 +72,7 @@ static int  kobil_startup(struct usb_serial *serial);
 static void kobil_shutdown(struct usb_serial *serial);
 static int  kobil_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void kobil_close(struct tty_struct *tty, struct usb_serial_port *port,
-			struct file *filp);
+static void kobil_close(struct usb_serial_port *port);
 static int  kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 			 const unsigned char *buf, int count);
 static int  kobil_write_room(struct tty_struct *tty);
@@ -209,7 +208,7 @@ static void kobil_shutdown(struct usb_serial *serial)
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		while (serial->port[i]->port.count > 0)
-			kobil_close(NULL, serial->port[i], NULL);
+			kobil_close(serial->port[i]);
 		kfree(usb_get_serial_port_data(serial->port[i]));
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
@@ -346,11 +345,11 @@ static int kobil_open(struct tty_struct *tty,
 }
 
 
-static void kobil_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void kobil_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
+	/* FIXME: Add rts/dtr methods */
 	if (port->write_urb) {
 		usb_kill_urb(port->write_urb);
 		usb_free_urb(port->write_urb);
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 82930a7d5093..873795548fc0 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -95,8 +95,8 @@ static int  mct_u232_startup(struct usb_serial *serial);
 static void mct_u232_shutdown(struct usb_serial *serial);
 static int  mct_u232_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void mct_u232_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void mct_u232_close(struct usb_serial_port *port);
+static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
 static void mct_u232_read_int_callback(struct urb *urb);
 static void mct_u232_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
@@ -140,6 +140,7 @@ static struct usb_serial_driver mct_u232_device = {
 	.num_ports =	     1,
 	.open =		     mct_u232_open,
 	.close =	     mct_u232_close,
+	.dtr_rts =	     mct_u232_dtr_rts,
 	.throttle =	     mct_u232_throttle,
 	.unthrottle =	     mct_u232_unthrottle,
 	.read_int_callback = mct_u232_read_int_callback,
@@ -496,29 +497,29 @@ error:
 	return retval;
 } /* mct_u232_open */
 
-
-static void mct_u232_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void mct_u232_dtr_rts(struct usb_serial_port *port, int on)
 {
-	unsigned int c_cflag;
 	unsigned int control_state;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
-	dbg("%s port %d", __func__, port->number);
 
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		mutex_lock(&port->serial->disc_mutex);
-		if (c_cflag & HUPCL && !port->serial->disconnected) {
-			/* drop DTR and RTS */
-			spin_lock_irq(&priv->lock);
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected) {
+		/* drop DTR and RTS */
+		spin_lock_irq(&priv->lock);
+		if (on)
+			priv->control_state |= TIOCM_DTR | TIOCM_RTS;
+		else
 			priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
-			control_state = priv->control_state;
-			spin_unlock_irq(&priv->lock);
-			mct_u232_set_modem_ctrl(port->serial, control_state);
-		}
-		mutex_unlock(&port->serial->disc_mutex);
+		control_state = priv->control_state;
+		spin_unlock_irq(&priv->lock);
+		mct_u232_set_modem_ctrl(port->serial, control_state);
 	}
+	mutex_unlock(&port->serial->disc_mutex);
+}
 
+static void mct_u232_close(struct usb_serial_port *port)
+{
+	dbg("%s port %d", __func__, port->number);
 
 	if (port->serial->dev) {
 		/* shutdown our urbs */
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 24e3b5d4b4d4..9e1a013ee7f6 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -533,8 +533,7 @@ static int mos7720_chars_in_buffer(struct tty_struct *tty)
 	return chars;
 }
 
-static void mos7720_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void mos7720_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
 	struct moschip_port *mos7720_port;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 84fb1dcd30dc..10b78a37214f 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1135,54 +1135,12 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty)
 
 }
 
-/************************************************************************
- *
- * mos7840_block_until_tx_empty
- *
- *	This function will block the close until one of the following:
- *		1. TX count are 0
- *		2. The mos7840 has stopped
- *		3. A timeout of 3 seconds without activity has expired
- *
- ************************************************************************/
-static void mos7840_block_until_tx_empty(struct tty_struct *tty,
-				struct moschip_port *mos7840_port)
-{
-	int timeout = HZ / 10;
-	int wait = 30;
-	int count;
-
-	while (1) {
-
-		count = mos7840_chars_in_buffer(tty);
-
-		/* Check for Buffer status */
-		if (count <= 0)
-			return;
-
-		/* Block the thread for a while */
-		interruptible_sleep_on_timeout(&mos7840_port->wait_chase,
-					       timeout);
-
-		/* No activity.. count down section */
-		wait--;
-		if (wait == 0) {
-			dbg("%s - TIMEOUT", __func__);
-			return;
-		} else {
-			/* Reset timeout value back to seconds */
-			wait = 30;
-		}
-	}
-}
-
 /*****************************************************************************
  * mos7840_close
  *	this function is called by the tty driver when a port is closed
  *****************************************************************************/
 
-static void mos7840_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void mos7840_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
 	struct moschip_port *mos7840_port;
@@ -1223,10 +1181,6 @@ static void mos7840_close(struct tty_struct *tty,
 		}
 	}
 
-	if (serial->dev)
-		/* flush and block until tx is empty */
-		mos7840_block_until_tx_empty(tty, mos7840_port);
-
 	/* While closing port, shutdown all bulk read, write  *
 	 * and interrupt read if they exists                  */
 	if (serial->dev) {
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index bcdcbb822705..f5f3751a888c 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -98,8 +98,7 @@ static int navman_open(struct tty_struct *tty,
 	return result;
 }
 
-static void navman_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void navman_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index df6539712726..1104617334f5 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -66,8 +66,7 @@ static int debug;
 /* function prototypes */
 static int  omninet_open(struct tty_struct *tty, struct usb_serial_port *port,
 							struct file *filp);
-static void omninet_close(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp);
+static void omninet_close(struct usb_serial_port *port);
 static void omninet_read_bulk_callback(struct urb *urb);
 static void omninet_write_bulk_callback(struct urb *urb);
 static int  omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -189,8 +188,7 @@ static int omninet_open(struct tty_struct *tty,
 	return result;
 }
 
-static void omninet_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void omninet_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 	usb_kill_urb(port->read_urb);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index b500ad10b758..c20480aa9755 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -173,8 +173,7 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port,
 	return result;
 }
 
-static void opticon_close(struct tty_struct *tty, struct usb_serial_port *port,
-			  struct file *filp)
+static void opticon_close(struct usb_serial_port *port)
 {
 	struct opticon_private *priv = usb_get_serial_data(port->serial);
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 7817b82889ca..a16d69fadba1 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -45,8 +45,9 @@
 /* Function prototypes */
 static int  option_open(struct tty_struct *tty, struct usb_serial_port *port,
 							struct file *filp);
-static void option_close(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp);
+static void option_close(struct usb_serial_port *port);
+static void option_dtr_rts(struct usb_serial_port *port, int on);
+
 static int  option_startup(struct usb_serial *serial);
 static void option_shutdown(struct usb_serial *serial);
 static int  option_write_room(struct tty_struct *tty);
@@ -61,7 +62,7 @@ static void option_set_termios(struct tty_struct *tty,
 static int  option_tiocmget(struct tty_struct *tty, struct file *file);
 static int  option_tiocmset(struct tty_struct *tty, struct file *file,
 				unsigned int set, unsigned int clear);
-static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *port);
+static int  option_send_setup(struct usb_serial_port *port);
 static int  option_suspend(struct usb_serial *serial, pm_message_t message);
 static int  option_resume(struct usb_serial *serial);
 
@@ -551,6 +552,7 @@ static struct usb_serial_driver option_1port_device = {
 	.num_ports         = 1,
 	.open              = option_open,
 	.close             = option_close,
+	.dtr_rts	   = option_dtr_rts,
 	.write             = option_write,
 	.write_room        = option_write_room,
 	.chars_in_buffer   = option_chars_in_buffer,
@@ -630,7 +632,7 @@ static void option_set_termios(struct tty_struct *tty,
 	dbg("%s", __func__);
 	/* Doesn't support option setting */
 	tty_termios_copy_hw(tty->termios, old_termios);
-	option_send_setup(tty, port);
+	option_send_setup(port);
 }
 
 static int option_tiocmget(struct tty_struct *tty, struct file *file)
@@ -669,7 +671,7 @@ static int option_tiocmset(struct tty_struct *tty, struct file *file,
 		portdata->rts_state = 0;
 	if (clear & TIOCM_DTR)
 		portdata->dtr_state = 0;
-	return option_send_setup(tty, port);
+	return option_send_setup(port);
 }
 
 /* Write */
@@ -897,10 +899,6 @@ static int option_open(struct tty_struct *tty,
 
 	dbg("%s", __func__);
 
-	/* Set some sane defaults */
-	portdata->rts_state = 1;
-	portdata->dtr_state = 1;
-
 	/* Reset low level data toggle and start reading from endpoints */
 	for (i = 0; i < N_IN_URB; i++) {
 		urb = portdata->in_urbs[i];
@@ -936,37 +934,43 @@ static int option_open(struct tty_struct *tty,
 				usb_pipeout(urb->pipe), 0); */
 	}
 
-	option_send_setup(tty, port);
+	option_send_setup(port);
 
 	return 0;
 }
 
-static void option_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void option_dtr_rts(struct usb_serial_port *port, int on)
 {
-	int i;
 	struct usb_serial *serial = port->serial;
 	struct option_port_private *portdata;
 
 	dbg("%s", __func__);
 	portdata = usb_get_serial_port_data(port);
+	mutex_lock(&serial->disc_mutex);
+	portdata->rts_state = on;
+	portdata->dtr_state = on;
+	if (serial->dev)
+		option_send_setup(port);
+	mutex_unlock(&serial->disc_mutex);
+}
 
-	portdata->rts_state = 0;
-	portdata->dtr_state = 0;
 
-	if (serial->dev) {
-		mutex_lock(&serial->disc_mutex);
-		if (!serial->disconnected)
-			option_send_setup(tty, port);
-		mutex_unlock(&serial->disc_mutex);
+static void option_close(struct usb_serial_port *port)
+{
+	int i;
+	struct usb_serial *serial = port->serial;
+	struct option_port_private *portdata;
+
+	dbg("%s", __func__);
+	portdata = usb_get_serial_port_data(port);
 
+	if (serial->dev) {
 		/* Stop reading/writing urbs */
 		for (i = 0; i < N_IN_URB; i++)
 			usb_kill_urb(portdata->in_urbs[i]);
 		for (i = 0; i < N_OUT_URB; i++)
 			usb_kill_urb(portdata->out_urbs[i]);
 	}
-	tty_port_tty_set(&port->port, NULL);
 }
 
 /* Helper functions used by option_setup_urbs */
@@ -1032,28 +1036,24 @@ static void option_setup_urbs(struct usb_serial *serial)
  * This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN
  * CDC.
 */
-static int option_send_setup(struct tty_struct *tty,
-						struct usb_serial_port *port)
+static int option_send_setup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct option_port_private *portdata;
 	int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+	int val = 0;
 	dbg("%s", __func__);
 
 	portdata = usb_get_serial_port_data(port);
 
-	if (tty) {
-		int val = 0;
-		if (portdata->dtr_state)
-			val |= 0x01;
-		if (portdata->rts_state)
-			val |= 0x02;
+	if (portdata->dtr_state)
+		val |= 0x01;
+	if (portdata->rts_state)
+		val |= 0x02;
 
-		return usb_control_msg(serial->dev,
-			usb_rcvctrlpipe(serial->dev, 0),
-			0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
-	}
-	return 0;
+	return usb_control_msg(serial->dev,
+		usb_rcvctrlpipe(serial->dev, 0),
+		0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
 }
 
 static int option_startup(struct usb_serial *serial)
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index ba551f00f16f..7de54781fe61 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -143,8 +143,7 @@ struct oti6858_control_pkt {
 /* function prototypes */
 static int oti6858_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void oti6858_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void oti6858_close(struct usb_serial_port *port);
 static void oti6858_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
 static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
@@ -622,67 +621,30 @@ static int oti6858_open(struct tty_struct *tty,
 	if (result != 0) {
 		dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 			       " with error %d\n", __func__, result);
-		oti6858_close(tty, port, NULL);
+		oti6858_close(port);
 		return -EPROTO;
 	}
 
 	/* setup termios */
 	if (tty)
 		oti6858_set_termios(tty, port, &tmp_termios);
-
+	port->port.drain_delay = 256;	/* FIXME: check the FIFO length */
 	return 0;
 }
 
-static void oti6858_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void oti6858_close(struct usb_serial_port *port)
 {
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	long timeout;
-	wait_queue_t wait;
 
 	dbg("%s(port = %d)", __func__, port->number);
 
-	/* wait for data to drain from the buffer */
 	spin_lock_irqsave(&priv->lock, flags);
-	timeout = 30 * HZ;	/* PL2303_CLOSING_WAIT */
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&tty->write_wait, &wait);
-	dbg("%s(): entering wait loop", __func__);
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (oti6858_buf_data_avail(priv->buf) == 0
-		|| timeout == 0 || signal_pending(current)
-		|| port->serial->disconnected)
-			break;
-		spin_unlock_irqrestore(&priv->lock, flags);
-		timeout = schedule_timeout(timeout);
-		spin_lock_irqsave(&priv->lock, flags);
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&tty->write_wait, &wait);
-	dbg("%s(): after wait loop", __func__);
-
 	/* clear out any remaining data in the buffer */
 	oti6858_buf_clear(priv->buf);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* wait for characters to drain from the device */
-	/* (this is long enough for the entire 256 byte */
-	/* pl2303 hardware buffer to drain with no flow */
-	/* control for data rates of 1200 bps or more, */
-	/* for lower rates we should really know how much */
-	/* data is in the buffer to compute a delay */
-	/* that is not unnecessarily long) */
-	/* FIXME
-	bps = tty_get_baud_rate(tty);
-	if (bps > 1200)
-		timeout = max((HZ*2560)/bps,HZ/10);
-	else
-	*/
-		timeout = 2*HZ;
-	schedule_timeout_interruptible(timeout);
-	dbg("%s(): after schedule_timeout_interruptible()", __func__);
+	dbg("%s(): after buf_clear()", __func__);
 
 	/* cancel scheduled setup */
 	cancel_delayed_work(&priv->delayed_setup_work);
@@ -694,15 +656,6 @@ static void oti6858_close(struct tty_struct *tty,
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->interrupt_in_urb);
-
-	/*
-	if (tty && (tty->termios->c_cflag) & HUPCL) {
-		// drop DTR and RTS
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->pending_setup.control &= ~CONTROL_MASK;
-		spin_unlock_irqrestore(&priv->lock, flags);
-	}
-	*/
 }
 
 static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 751a533a4347..e02dc3d643c7 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -652,69 +652,41 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	kfree(buf);
 }
 
-static void pl2303_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	/* Change DTR and RTS */
+	if (on)
+		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+	else
+		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	set_control_lines(port->serial->dev, control);
+}
+
+static void pl2303_close(struct usb_serial_port *port)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	unsigned int c_cflag;
-	int bps;
-	long timeout;
-	wait_queue_t wait;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* wait for data to drain from the buffer */
 	spin_lock_irqsave(&priv->lock, flags);
-	timeout = PL2303_CLOSING_WAIT;
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&tty->write_wait, &wait);
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (pl2303_buf_data_avail(priv->buf) == 0 ||
-		    timeout == 0 || signal_pending(current) ||
-		    port->serial->disconnected)
-			break;
-		spin_unlock_irqrestore(&priv->lock, flags);
-		timeout = schedule_timeout(timeout);
-		spin_lock_irqsave(&priv->lock, flags);
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&tty->write_wait, &wait);
 	/* clear out any remaining data in the buffer */
 	pl2303_buf_clear(priv->buf);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* wait for characters to drain from the device */
-	/* (this is long enough for the entire 256 byte */
-	/* pl2303 hardware buffer to drain with no flow */
-	/* control for data rates of 1200 bps or more, */
-	/* for lower rates we should really know how much */
-	/* data is in the buffer to compute a delay */
-	/* that is not unnecessarily long) */
-	bps = tty_get_baud_rate(tty);
-	if (bps > 1200)
-		timeout = max((HZ*2560)/bps, HZ/10);
-	else
-		timeout = 2*HZ;
-	schedule_timeout_interruptible(timeout);
-
 	/* shutdown our urbs */
 	dbg("%s - shutting down urbs", __func__);
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->interrupt_in_urb);
 
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		if (c_cflag & HUPCL) {
-			/* drop DTR and RTS */
-			spin_lock_irqsave(&priv->lock, flags);
-			priv->line_control = 0;
-			spin_unlock_irqrestore(&priv->lock, flags);
-			set_control_lines(port->serial->dev, 0);
-		}
-	}
 }
 
 static int pl2303_open(struct tty_struct *tty,
@@ -748,7 +720,7 @@ static int pl2303_open(struct tty_struct *tty,
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting read urb,"
 			" error %d\n", __func__, result);
-		pl2303_close(tty, port, NULL);
+		pl2303_close(port);
 		return -EPROTO;
 	}
 
@@ -758,9 +730,10 @@ static int pl2303_open(struct tty_struct *tty,
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
 			" error %d\n", __func__, result);
-		pl2303_close(tty, port, NULL);
+		pl2303_close(port);
 		return -EPROTO;
 	}
+	port->port.drain_delay = 256;
 	return 0;
 }
 
@@ -821,6 +794,14 @@ static int pl2303_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
+static int pl2303_carrier_raised(struct usb_serial_port *port)
+{
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	if (priv->line_status & UART_DCD)
+		return 1;
+	return 0;
+}
+
 static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -1125,6 +1106,8 @@ static struct usb_serial_driver pl2303_device = {
 	.num_ports =		1,
 	.open =			pl2303_open,
 	.close =		pl2303_close,
+	.dtr_rts = 		pl2303_dtr_rts,
+	.carrier_raised =	pl2303_carrier_raised,
 	.write =		pl2303_write,
 	.ioctl =		pl2303_ioctl,
 	.break_ctl =		pl2303_break_ctl,
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 913225c61610..17ac34f4d668 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -26,12 +26,10 @@
 #include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
-#include <linux/usb/ch9.h>
 
 #define SWIMS_USB_REQUEST_SetPower	0x00
 #define SWIMS_USB_REQUEST_SetNmea	0x07
 
-/* per port private data */
 #define N_IN_URB	4
 #define N_OUT_URB	4
 #define IN_BUFLEN	4096
@@ -39,6 +37,12 @@
 static int debug;
 static int nmea;
 
+/* Used in interface blacklisting */
+struct sierra_iface_info {
+	const u32 infolen;	/* number of interface numbers on blacklist */
+	const u8  *ifaceinfo;	/* pointer to the array holding the numbers */
+};
+
 static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 {
 	int result;
@@ -85,6 +89,23 @@ static int sierra_calc_num_ports(struct usb_serial *serial)
 	return result;
 }
 
+static int is_blacklisted(const u8 ifnum,
+				const struct sierra_iface_info *blacklist)
+{
+	const u8  *info;
+	int i;
+
+	if (blacklist) {
+		info = blacklist->ifaceinfo;
+
+		for (i = 0; i < blacklist->infolen; i++) {
+			if (info[i] == ifnum)
+				return 1;
+		}
+	}
+	return 0;
+}
+
 static int sierra_calc_interface(struct usb_serial *serial)
 {
 	int interface;
@@ -153,9 +174,25 @@ static int sierra_probe(struct usb_serial *serial,
 	 */
 	usb_set_serial_data(serial, (void *)num_ports);
 
+	/* ifnum could have changed - by calling usb_set_interface */
+	ifnum = sierra_calc_interface(serial);
+
+	if (is_blacklisted(ifnum,
+				(struct sierra_iface_info *)id->driver_info)) {
+		dev_dbg(&serial->dev->dev,
+			"Ignoring blacklisted interface #%d\n", ifnum);
+		return -ENODEV;
+	}
+
 	return result;
 }
 
+static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 };
+static const struct sierra_iface_info direct_ip_interface_blacklist = {
+	.infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces),
+	.ifaceinfo = direct_ip_non_serial_ifaces,
+};
+
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
 	{ USB_DEVICE(0x1199, 0x0018) },	/* Sierra Wireless MC5720 */
@@ -188,9 +225,11 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x6833) },	/* Sierra Wireless MC8781 */
 	{ USB_DEVICE(0x1199, 0x683A) },	/* Sierra Wireless MC8785 */
 	{ USB_DEVICE(0x1199, 0x683B) },	/* Sierra Wireless MC8785 Composite */
-	{ USB_DEVICE(0x1199, 0x683C) },	/* Sierra Wireless MC8790 */
-	{ USB_DEVICE(0x1199, 0x683D) },	/* Sierra Wireless MC8790 */
-	{ USB_DEVICE(0x1199, 0x683E) },	/* Sierra Wireless MC8790 */
+	/* Sierra Wireless MC8790, MC8791, MC8792 Composite */
+	{ USB_DEVICE(0x1199, 0x683C) },
+	{ USB_DEVICE(0x1199, 0x683D) },	/* Sierra Wireless MC8791 Composite */
+	/* Sierra Wireless MC8790, MC8791, MC8792 */
+	{ USB_DEVICE(0x1199, 0x683E) },
 	{ USB_DEVICE(0x1199, 0x6850) },	/* Sierra Wireless AirCard 880 */
 	{ USB_DEVICE(0x1199, 0x6851) },	/* Sierra Wireless AirCard 881 */
 	{ USB_DEVICE(0x1199, 0x6852) },	/* Sierra Wireless AirCard 880 E */
@@ -211,6 +250,10 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
 	{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
 
+	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+	},
+
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -229,7 +272,6 @@ struct sierra_port_private {
 
 	/* Input endpoints and buffers for this port */
 	struct urb *in_urbs[N_IN_URB];
-	char *in_buffer[N_IN_URB];
 
 	/* Settings for the port */
 	int rts_state;	/* Handshaking pins (outputs) */
@@ -240,57 +282,50 @@ struct sierra_port_private {
 	int ri_state;
 };
 
-static int sierra_send_setup(struct tty_struct *tty,
-						struct usb_serial_port *port)
+static int sierra_send_setup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct sierra_port_private *portdata;
 	__u16 interface = 0;
+	int val = 0;
 
 	dev_dbg(&port->dev, "%s", __func__);
 
 	portdata = usb_get_serial_port_data(port);
 
-	if (tty) {
-		int val = 0;
-		if (portdata->dtr_state)
-			val |= 0x01;
-		if (portdata->rts_state)
-			val |= 0x02;
-
-		/* If composite device then properly report interface */
-		if (serial->num_ports == 1) {
-			interface = sierra_calc_interface(serial);
-
-			/* Control message is sent only to interfaces with
-			 * interrupt_in endpoints
-			 */
-			if (port->interrupt_in_urb) {
-				/* send control message */
-				return usb_control_msg(serial->dev,
-					usb_rcvctrlpipe(serial->dev, 0),
-					0x22, 0x21, val, interface,
-					NULL, 0, USB_CTRL_SET_TIMEOUT);
-			}
-		}
-
-		/* Otherwise the need to do non-composite mapping */
-		else {
-			if (port->bulk_out_endpointAddress == 2)
-				interface = 0;
-			else if (port->bulk_out_endpointAddress == 4)
-				interface = 1;
-			else if (port->bulk_out_endpointAddress == 5)
-				interface = 2;
+	if (portdata->dtr_state)
+		val |= 0x01;
+	if (portdata->rts_state)
+		val |= 0x02;
 
+	/* If composite device then properly report interface */
+	if (serial->num_ports == 1) {
+		interface = sierra_calc_interface(serial);
+		/* Control message is sent only to interfaces with
+		 * interrupt_in endpoints
+		 */
+		if (port->interrupt_in_urb) {
+			/* send control message */
 			return usb_control_msg(serial->dev,
 				usb_rcvctrlpipe(serial->dev, 0),
 				0x22, 0x21, val, interface,
 				NULL, 0, USB_CTRL_SET_TIMEOUT);
-
 		}
 	}
 
+	/* Otherwise the need to do non-composite mapping */
+	else {
+		if (port->bulk_out_endpointAddress == 2)
+			interface = 0;
+		else if (port->bulk_out_endpointAddress == 4)
+			interface = 1;
+		else if (port->bulk_out_endpointAddress == 5)
+			interface = 2;
+		return usb_control_msg(serial->dev,
+			usb_rcvctrlpipe(serial->dev, 0),
+			0x22, 0x21, val, interface,
+			NULL, 0, USB_CTRL_SET_TIMEOUT);
+	}
 	return 0;
 }
 
@@ -299,7 +334,7 @@ static void sierra_set_termios(struct tty_struct *tty,
 {
 	dev_dbg(&port->dev, "%s", __func__);
 	tty_termios_copy_hw(tty->termios, old_termios);
-	sierra_send_setup(tty, port);
+	sierra_send_setup(port);
 }
 
 static int sierra_tiocmget(struct tty_struct *tty, struct file *file)
@@ -338,7 +373,18 @@ static int sierra_tiocmset(struct tty_struct *tty, struct file *file,
 		portdata->rts_state = 0;
 	if (clear & TIOCM_DTR)
 		portdata->dtr_state = 0;
-	return sierra_send_setup(tty, port);
+	return sierra_send_setup(port);
+}
+
+static void sierra_release_urb(struct urb *urb)
+{
+	struct usb_serial_port *port;
+	if (urb) {
+		port =  urb->context;
+		dev_dbg(&port->dev, "%s: %p\n", __func__, urb);
+		kfree(urb->transfer_buffer);
+		usb_free_urb(urb);
+	}
 }
 
 static void sierra_outdat_callback(struct urb *urb)
@@ -465,7 +511,7 @@ static void sierra_indat_callback(struct urb *urb)
 				" received", __func__);
 
 		/* Resubmit urb so we continue receiving */
-		if (port->port.count && status != -ESHUTDOWN) {
+		if (port->port.count && status != -ESHUTDOWN && status != -EPERM) {
 			err = usb_submit_urb(urb, GFP_ATOMIC);
 			if (err)
 				dev_err(&port->dev, "resubmit read urb failed."
@@ -557,67 +603,99 @@ static int sierra_write_room(struct tty_struct *tty)
 	return 2048;
 }
 
-static int sierra_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void sierra_stop_rx_urbs(struct usb_serial_port *port)
 {
-	struct sierra_port_private *portdata;
-	struct usb_serial *serial = port->serial;
 	int i;
-	struct urb *urb;
-	int result;
+	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
 
-	portdata = usb_get_serial_port_data(port);
+	for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++)
+		usb_kill_urb(portdata->in_urbs[i]);
 
-	dev_dbg(&port->dev, "%s", __func__);
+	usb_kill_urb(port->interrupt_in_urb);
+}
 
-	/* Set some sane defaults */
-	portdata->rts_state = 1;
-	portdata->dtr_state = 1;
+static int sierra_submit_rx_urbs(struct usb_serial_port *port, gfp_t mem_flags)
+{
+	int ok_cnt;
+	int err = -EINVAL;
+	int i;
+	struct urb *urb;
+	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
 
-	/* Reset low level data toggle and start reading from endpoints */
-	for (i = 0; i < N_IN_URB; i++) {
+	ok_cnt = 0;
+	for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) {
 		urb = portdata->in_urbs[i];
 		if (!urb)
 			continue;
-		if (urb->dev != serial->dev) {
-			dev_dbg(&port->dev, "%s: dev %p != %p",
-				 __func__, urb->dev, serial->dev);
-			continue;
+		err = usb_submit_urb(urb, mem_flags);
+		if (err) {
+			dev_err(&port->dev, "%s: submit urb failed: %d\n",
+				__func__, err);
+		} else {
+			ok_cnt++;
 		}
+	}
 
-		/*
-		 * make sure endpoint data toggle is synchronized with the
-		 * device
-		 */
-		usb_clear_halt(urb->dev, urb->pipe);
-
-		result = usb_submit_urb(urb, GFP_KERNEL);
-		if (result) {
-			dev_err(&port->dev, "submit urb %d failed (%d) %d\n",
-				i, result, urb->transfer_buffer_length);
+	if (ok_cnt && port->interrupt_in_urb) {
+		err = usb_submit_urb(port->interrupt_in_urb, mem_flags);
+		if (err) {
+			dev_err(&port->dev, "%s: submit intr urb failed: %d\n",
+				__func__, err);
 		}
 	}
 
-	sierra_send_setup(tty, port);
+	if (ok_cnt > 0) /* at least one rx urb submitted */
+		return 0;
+	else
+		return err;
+}
+
+static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint,
+					int dir, void *ctx, int len,
+					gfp_t mem_flags,
+					usb_complete_t callback)
+{
+	struct urb	*urb;
+	u8		*buf;
+
+	if (endpoint == -1)
+		return NULL;
 
-	/* start up the interrupt endpoint if we have one */
-	if (port->interrupt_in_urb) {
-		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
-		if (result)
-			dev_err(&port->dev, "submit irq_in urb failed %d\n",
-				result);
+	urb = usb_alloc_urb(0, mem_flags);
+	if (urb == NULL) {
+		dev_dbg(&serial->dev->dev, "%s: alloc for endpoint %d failed\n",
+			__func__, endpoint);
+		return NULL;
 	}
-	return 0;
+
+	buf = kmalloc(len, mem_flags);
+	if (buf) {
+		/* Fill URB using supplied data */
+		usb_fill_bulk_urb(urb, serial->dev,
+			usb_sndbulkpipe(serial->dev, endpoint) | dir,
+			buf, len, callback, ctx);
+
+		/* debug */
+		dev_dbg(&serial->dev->dev, "%s %c u : %p d:%p\n", __func__,
+				dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
+	} else {
+		dev_dbg(&serial->dev->dev, "%s %c u:%p d:%p\n", __func__,
+				dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
+
+		sierra_release_urb(urb);
+		urb = NULL;
+	}
+
+	return urb;
 }
 
-static void sierra_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void sierra_close(struct usb_serial_port *port)
 {
 	int i;
 	struct usb_serial *serial = port->serial;
 	struct sierra_port_private *portdata;
 
-	dev_dbg(&port->dev, "%s", __func__);
+	dev_dbg(&port->dev, "%s\n", __func__);
 	portdata = usb_get_serial_port_data(port);
 
 	portdata->rts_state = 0;
@@ -626,25 +704,83 @@ static void sierra_close(struct tty_struct *tty,
 	if (serial->dev) {
 		mutex_lock(&serial->disc_mutex);
 		if (!serial->disconnected)
-			sierra_send_setup(tty, port);
+			sierra_send_setup(port);
 		mutex_unlock(&serial->disc_mutex);
 
-		/* Stop reading/writing urbs */
-		for (i = 0; i < N_IN_URB; i++)
-			usb_kill_urb(portdata->in_urbs[i]);
+		/* Stop reading urbs */
+		sierra_stop_rx_urbs(port);
+		/* .. and release them */
+		for (i = 0; i < N_IN_URB; i++) {
+			sierra_release_urb(portdata->in_urbs[i]);
+			portdata->in_urbs[i] = NULL;
+		}
 	}
+}
 
-	usb_kill_urb(port->interrupt_in_urb);
-	tty_port_tty_set(&port->port, NULL);
+static int sierra_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
+{
+	struct sierra_port_private *portdata;
+	struct usb_serial *serial = port->serial;
+	int i;
+	int err;
+	int endpoint;
+	struct urb *urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	dev_dbg(&port->dev, "%s", __func__);
+
+	/* Set some sane defaults */
+	portdata->rts_state = 1;
+	portdata->dtr_state = 1;
+
+
+	endpoint = port->bulk_in_endpointAddress;
+	for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) {
+		urb = sierra_setup_urb(serial, endpoint, USB_DIR_IN, port,
+					IN_BUFLEN, GFP_KERNEL,
+					sierra_indat_callback);
+		portdata->in_urbs[i] = urb;
+	}
+	/* clear halt condition */
+	usb_clear_halt(serial->dev,
+			usb_sndbulkpipe(serial->dev, endpoint) | USB_DIR_IN);
+
+	err = sierra_submit_rx_urbs(port, GFP_KERNEL);
+	if (err) {
+		/* get rid of everything as in close */
+		sierra_close(port);
+		return err;
+	}
+	sierra_send_setup(port);
+
+	return 0;
+}
+
+
+static void sierra_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_serial *serial = port->serial;
+	struct sierra_port_private *portdata;
+
+	portdata = usb_get_serial_port_data(port);
+	portdata->rts_state = on;
+	portdata->dtr_state = on;
+
+	if (serial->dev) {
+		mutex_lock(&serial->disc_mutex);
+		if (!serial->disconnected)
+			sierra_send_setup(port);
+		mutex_unlock(&serial->disc_mutex);
+	}
 }
 
 static int sierra_startup(struct usb_serial *serial)
 {
 	struct usb_serial_port *port;
 	struct sierra_port_private *portdata;
-	struct urb *urb;
 	int i;
-	int j;
 
 	dev_dbg(&serial->dev->dev, "%s", __func__);
 
@@ -666,34 +802,8 @@ static int sierra_startup(struct usb_serial *serial)
 			return -ENOMEM;
 		}
 		spin_lock_init(&portdata->lock);
-		for (j = 0; j < N_IN_URB; j++) {
-			portdata->in_buffer[j] = kmalloc(IN_BUFLEN, GFP_KERNEL);
-			if (!portdata->in_buffer[j]) {
-				for (--j; j >= 0; j--)
-					kfree(portdata->in_buffer[j]);
-				kfree(portdata);
-				return -ENOMEM;
-			}
-		}
-
+		/* Set the port private data pointer */
 		usb_set_serial_port_data(port, portdata);
-
-		/* initialize the in urbs */
-		for (j = 0; j < N_IN_URB; ++j) {
-			urb = usb_alloc_urb(0, GFP_KERNEL);
-			if (urb == NULL) {
-				dev_dbg(&port->dev, "%s: alloc for in "
-					"port failed.", __func__);
-				continue;
-			}
-			/* Fill URB using supplied data. */
-			usb_fill_bulk_urb(urb, serial->dev,
-					  usb_rcvbulkpipe(serial->dev,
-						port->bulk_in_endpointAddress),
-					  portdata->in_buffer[j], IN_BUFLEN,
-					  sierra_indat_callback, port);
-			portdata->in_urbs[j] = urb;
-		}
 	}
 
 	return 0;
@@ -701,7 +811,7 @@ static int sierra_startup(struct usb_serial *serial)
 
 static void sierra_shutdown(struct usb_serial *serial)
 {
-	int i, j;
+	int i;
 	struct usb_serial_port *port;
 	struct sierra_port_private *portdata;
 
@@ -714,12 +824,6 @@ static void sierra_shutdown(struct usb_serial *serial)
 		portdata = usb_get_serial_port_data(port);
 		if (!portdata)
 			continue;
-
-		for (j = 0; j < N_IN_URB; j++) {
-			usb_kill_urb(portdata->in_urbs[j]);
-			usb_free_urb(portdata->in_urbs[j]);
-			kfree(portdata->in_buffer[j]);
-		}
 		kfree(portdata);
 		usb_set_serial_port_data(port, NULL);
 	}
@@ -737,6 +841,7 @@ static struct usb_serial_driver sierra_device = {
 	.probe		   = sierra_probe,
 	.open              = sierra_open,
 	.close             = sierra_close,
+	.dtr_rts	   = sierra_dtr_rts,
 	.write             = sierra_write,
 	.write_room        = sierra_write_room,
 	.set_termios       = sierra_set_termios,
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 5e7528cc81a8..8f7ed8f13996 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -446,66 +446,47 @@ static void spcp8x5_set_workMode(struct usb_device *dev, u16 value,
 			"RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret);
 }
 
+static int spcp8x5_carrier_raised(struct usb_serial_port *port)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	if (priv->line_status & MSR_STATUS_LINE_DCD)
+		return 1;
+	return 0;
+}
+
+static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (on)
+		priv->line_control = MCR_CONTROL_LINE_DTR
+						| MCR_CONTROL_LINE_RTS;
+	else
+		priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
+						| MCR_CONTROL_LINE_RTS);
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
+}
+
 /* close the serial port. We should wait for data sending to device 1st and
  * then kill all urb. */
-static void spcp8x5_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void spcp8x5_close(struct usb_serial_port *port)
 {
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	unsigned int c_cflag;
-	int bps;
-	long timeout;
-	wait_queue_t wait;
 	int result;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* wait for data to drain from the buffer */
 	spin_lock_irqsave(&priv->lock, flags);
-	timeout = SPCP8x5_CLOSING_WAIT;
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&tty->write_wait, &wait);
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (ringbuf_avail_data(priv->buf) == 0 ||
-		    timeout == 0 || signal_pending(current))
-			break;
-		spin_unlock_irqrestore(&priv->lock, flags);
-		timeout = schedule_timeout(timeout);
-		spin_lock_irqsave(&priv->lock, flags);
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&tty->write_wait, &wait);
-
 	/* clear out any remaining data in the buffer */
 	clear_ringbuf(priv->buf);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* wait for characters to drain from the device (this is long enough
-	 * for the entire all byte spcp8x5 hardware buffer to drain with no
-	 * flow control for data rates of 1200 bps or more, for lower rates we
-	 * should really know how much data is in the buffer to compute a delay
-	 * that is not unnecessarily long) */
-	bps = tty_get_baud_rate(tty);
-	if (bps > 1200)
-		timeout = max((HZ*2560) / bps, HZ/10);
-	else
-		timeout = 2*HZ;
-	set_current_state(TASK_INTERRUPTIBLE);
-	schedule_timeout(timeout);
-
-	/* clear control lines */
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		if (c_cflag & HUPCL) {
-			spin_lock_irqsave(&priv->lock, flags);
-			priv->line_control = 0;
-			spin_unlock_irqrestore(&priv->lock, flags);
-			spcp8x5_set_ctrlLine(port->serial->dev, 0 , priv->type);
-		}
-	}
-
 	/* kill urb */
 	if (port->write_urb != NULL) {
 		result = usb_unlink_urb(port->write_urb);
@@ -665,13 +646,6 @@ static int spcp8x5_open(struct tty_struct *tty,
 	if (ret)
 		return ret;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (tty && (tty->termios->c_cflag & CBAUD))
-		priv->line_control = MCR_DTR | MCR_RTS;
-	else
-		priv->line_control = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
 
 	/* Setup termios */
@@ -691,9 +665,10 @@ static int spcp8x5_open(struct tty_struct *tty,
 	port->read_urb->dev = serial->dev;
 	ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (ret) {
-		spcp8x5_close(tty, port, NULL);
+		spcp8x5_close(port);
 		return -EPROTO;
 	}
+	port->port.drain_delay = 256;
 	return 0;
 }
 
@@ -1033,6 +1008,8 @@ static struct usb_serial_driver spcp8x5_device = {
 	.num_ports		= 1,
 	.open 			= spcp8x5_open,
 	.close 			= spcp8x5_close,
+	.dtr_rts		= spcp8x5_dtr_rts,
+	.carrier_raised		= spcp8x5_carrier_raised,
 	.write 			= spcp8x5_write,
 	.set_termios 		= spcp8x5_set_termios,
 	.ioctl 			= spcp8x5_ioctl,
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 69879e437940..8b07ebc6baeb 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -152,8 +152,7 @@ static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port,
 	return result;
 }
 
-static void symbol_close(struct tty_struct *tty, struct usb_serial_port *port,
-			  struct file *filp)
+static void symbol_close(struct usb_serial_port *port)
 {
 	struct symbol_private *priv = usb_get_serial_data(port->serial);
 
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 0a64bac306ee..42cb04c403be 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -100,8 +100,7 @@ static int ti_startup(struct usb_serial *serial);
 static void ti_shutdown(struct usb_serial *serial);
 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
 		struct file *file);
-static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
-		struct file *file);
+static void ti_close(struct usb_serial_port *port);
 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 		const unsigned char *data, int count);
 static int ti_write_room(struct tty_struct *tty);
@@ -647,8 +646,7 @@ release_lock:
 }
 
 
-static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *file)
+static void ti_close(struct usb_serial_port *port)
 {
 	struct ti_device *tdev;
 	struct ti_port *tport;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 0a566eea49c0..1967a7edc10c 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -238,9 +238,11 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 			goto bailout_interface_put;
 		mutex_unlock(&serial->disc_mutex);
 	}
-
 	mutex_unlock(&port->mutex);
-	return 0;
+	/* Now do the correct tty layer semantics */
+	retval = tty_port_block_til_ready(&port->port, tty, filp);
+	if (retval == 0)
+		return 0;
 
 bailout_interface_put:
 	usb_autopm_put_interface(serial->interface);
@@ -259,64 +261,89 @@ bailout_serial_put:
 	return retval;
 }
 
-static void serial_close(struct tty_struct *tty, struct file *filp)
+/**
+ *	serial_do_down		-	shut down hardware
+ *	@port: port to shut down
+ *
+ *	Shut down a USB port unless it is the console. We never shut down the
+ *	console hardware as it will always be in use.
+ *
+ *	Don't free any resources at this point
+ */
+static void serial_do_down(struct usb_serial_port *port)
 {
-	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial_driver *drv = port->serial->type;
 	struct usb_serial *serial;
 	struct module *owner;
-	int count;
 
-	if (!port)
+	/* The console is magical, do not hang up the console hardware
+	   or there will be tears */
+	if (port->console)
 		return;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	mutex_lock(&port->mutex);
 	serial = port->serial;
 	owner = serial->type->driver.owner;
 
-	if (port->port.count == 0) {
-		mutex_unlock(&port->mutex);
-		return;
-	}
-
-	if (port->port.count == 1)
-		/* only call the device specific close if this
-		 * port is being closed by the last owner. Ensure we do
-		 * this before we drop the port count. The call is protected
-		 * by the port mutex
-		 */
-		serial->type->close(tty, port, filp);
-
-	if (port->port.count == (port->console ? 2 : 1)) {
-		struct tty_struct *tty = tty_port_tty_get(&port->port);
-		if (tty) {
-			/* We must do this before we drop the port count to
-			   zero. */
-			if (tty->driver_data)
-				tty->driver_data = NULL;
-			tty_port_tty_set(&port->port, NULL);
-			tty_kref_put(tty);
-		}
-	}
+	if (drv->close)
+		drv->close(port);
 
-	--port->port.count;
-	count = port->port.count;
 	mutex_unlock(&port->mutex);
-	put_device(&port->dev);
+}
+
+/**
+ *	serial_do_free		-	free resources post close/hangup
+ *	@port: port to free up
+ *
+ *	Do the resource freeing and refcount dropping for the port. We must
+ *	be careful about ordering and we must avoid freeing up the console.
+ */
 
+static void serial_do_free(struct usb_serial_port *port)
+{
+	struct usb_serial *serial;
+	struct module *owner;
+
+	/* The console is magical, do not hang up the console hardware
+	   or there will be tears */
+	if (port->console)
+		return;
+
+	serial = port->serial;
+	owner = serial->type->driver.owner;
+	put_device(&port->dev);
 	/* Mustn't dereference port any more */
-	if (count == 0) {
-		mutex_lock(&serial->disc_mutex);
-		if (!serial->disconnected)
-			usb_autopm_put_interface(serial->interface);
-		mutex_unlock(&serial->disc_mutex);
-	}
+	mutex_lock(&serial->disc_mutex);
+	if (!serial->disconnected)
+		usb_autopm_put_interface(serial->interface);
+	mutex_unlock(&serial->disc_mutex);
 	usb_serial_put(serial);
-
 	/* Mustn't dereference serial any more */
-	if (count == 0)
-		module_put(owner);
+	module_put(owner);
+}
+
+static void serial_close(struct tty_struct *tty, struct file *filp)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dbg("%s - port %d", __func__, port->number);
+
+
+	if (tty_port_close_start(&port->port, tty, filp) == 0)
+		return;
+
+	serial_do_down(port);		
+	tty_port_close_end(&port->port, tty);
+	tty_port_tty_set(&port->port, NULL);
+	serial_do_free(port);
+}
+
+static void serial_hangup(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	serial_do_down(port);
+	tty_port_hangup(&port->port);
+	serial_do_free(port);
 }
 
 static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -648,6 +675,29 @@ static struct usb_serial_driver *search_serial_device(
 	return NULL;
 }
 
+static int serial_carrier_raised(struct tty_port *port)
+{
+	struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
+	struct usb_serial_driver *drv = p->serial->type;
+	if (drv->carrier_raised)
+		return drv->carrier_raised(p);
+	/* No carrier control - don't block */
+	return 1;	
+}
+
+static void serial_dtr_rts(struct tty_port *port, int on)
+{
+	struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
+	struct usb_serial_driver *drv = p->serial->type;
+	if (drv->dtr_rts)
+		drv->dtr_rts(p, on);
+}
+
+static const struct tty_port_operations serial_port_ops = {
+	.carrier_raised = serial_carrier_raised,
+	.dtr_rts = serial_dtr_rts,
+};
+
 int usb_serial_probe(struct usb_interface *interface,
 			       const struct usb_device_id *id)
 {
@@ -841,6 +891,7 @@ int usb_serial_probe(struct usb_interface *interface,
 		if (!port)
 			goto probe_error;
 		tty_port_init(&port->port);
+		port->port.ops = &serial_port_ops;
 		port->serial = serial;
 		spin_lock_init(&port->lock);
 		mutex_init(&port->mutex);
@@ -974,6 +1025,7 @@ int usb_serial_probe(struct usb_interface *interface,
 		if (retval > 0) {
 			/* quietly accept this device, but don't bind to a
 			   serial port as it's about to disappear */
+			serial->num_ports = 0;
 			goto exit;
 		}
 	}
@@ -1070,6 +1122,9 @@ void usb_serial_disconnect(struct usb_interface *interface)
 		if (port) {
 			struct tty_struct *tty = tty_port_tty_get(&port->port);
 			if (tty) {
+				/* The hangup will occur asynchronously but
+				   the object refcounts will sort out all the
+				   cleanup */
 				tty_hangup(tty);
 				tty_kref_put(tty);
 			}
@@ -1134,6 +1189,7 @@ static const struct tty_operations serial_ops = {
 	.open =			serial_open,
 	.close =		serial_close,
 	.write =		serial_write,
+	.hangup = 		serial_hangup,
 	.write_room =		serial_write_room,
 	.ioctl =		serial_ioctl,
 	.set_termios =		serial_set_termios,
@@ -1146,6 +1202,7 @@ static const struct tty_operations serial_ops = {
 	.proc_fops =		&serial_proc_fops,
 };
 
+
 struct tty_driver *usb_serial_tty_driver;
 
 static int __init usb_serial_init(void)
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 5ac414bda718..b15f1c0e1d4a 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -38,8 +38,7 @@
 /* function prototypes for a handspring visor */
 static int  visor_open(struct tty_struct *tty, struct usb_serial_port *port,
 					struct file *filp);
-static void visor_close(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp);
+static void visor_close(struct usb_serial_port *port);
 static int  visor_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
 static int  visor_write_room(struct tty_struct *tty);
@@ -324,8 +323,7 @@ exit:
 }
 
 
-static void visor_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void visor_close(struct usb_serial_port *port)
 {
 	struct visor_private *priv = usb_get_serial_port_data(port);
 	unsigned char *transfer_buffer;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 5335d3211c07..7c7295d09f34 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -147,8 +147,7 @@ static int  whiteheat_attach(struct usb_serial *serial);
 static void whiteheat_shutdown(struct usb_serial *serial);
 static int  whiteheat_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void whiteheat_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void whiteheat_close(struct usb_serial_port *port);
 static int  whiteheat_write(struct tty_struct *tty,
 			struct usb_serial_port *port,
 			const unsigned char *buf, int count);
@@ -712,8 +711,7 @@ exit:
 }
 
 
-static void whiteheat_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void whiteheat_close(struct usb_serial_port *port)
 {
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	struct whiteheat_urb_wrap *wrap;
@@ -723,31 +721,7 @@ static void whiteheat_close(struct tty_struct *tty,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	mutex_lock(&port->serial->disc_mutex);
-	/* filp is NULL when called from usb_serial_disconnect */
-	if ((filp && (tty_hung_up_p(filp))) || port->serial->disconnected) {
-		mutex_unlock(&port->serial->disc_mutex);
-		return;
-	}
-	mutex_unlock(&port->serial->disc_mutex);
-
-	tty->closing = 1;
-
-/*
- * Not currently in use; tty_wait_until_sent() calls
- * serial_chars_in_buffer() which deadlocks on the second semaphore
- * acquisition. This should be fixed at some point. Greg's been
- * notified.
-	if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) {
-		tty_wait_until_sent(tty, CLOSING_DELAY);
-	}
-*/
-
-	tty_driver_flush_buffer(tty);
-	tty_ldisc_flush(tty);
-
 	firm_report_tx_done(port);
-
 	firm_close(port);
 
 	/* shutdown our bulk reads and writes */
@@ -775,10 +749,7 @@ static void whiteheat_close(struct tty_struct *tty,
 	}
 	spin_unlock_irq(&info->lock);
 	mutex_unlock(&info->deathwarrant);
-
 	stop_command_port(port->serial);
-
-	tty->closing = 0;
 }
 
 
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 4ca3b5860643..cfa26d56ce60 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -132,7 +132,7 @@ static int slave_configure(struct scsi_device *sdev)
 
 		if (us->fflags & US_FL_MAX_SECTORS_MIN)
 			max_sectors = PAGE_CACHE_SIZE >> 9;
-		if (sdev->request_queue->max_sectors > max_sectors)
+		if (queue_max_sectors(sdev->request_queue) > max_sectors)
 			blk_queue_max_sectors(sdev->request_queue,
 					      max_sectors);
 	} else if (sdev->type == TYPE_TAPE) {
@@ -483,7 +483,7 @@ static ssize_t show_max_sectors(struct device *dev, struct device_attribute *att
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
 
-	return sprintf(buf, "%u\n", sdev->request_queue->max_sectors);
+	return sprintf(buf, "%u\n", queue_max_sectors(sdev->request_queue));
 }
 
 /* Input routine for the sysfs max_sectors file */