Merge branch 'master' into for-next

Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.

100 files changed, 638 insertions, 444 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 41b6e51188e4..006489d82dc3 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -66,6 +66,7 @@ config USB_ARCH_HAS_EHCI
 	default y if ARCH_VT8500
 	default y if PLAT_SPEAR
 	default y if ARCH_MSM
+	default y if MICROBLAZE
 	default PCI
 
 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index b268e9fccb47..e71521ce3010 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -1283,7 +1283,7 @@ static void uea_set_bulk_timeout(struct uea_softc *sc, u32 dsrate)
 
 	/* in bulk mode the modem have problem with high rate
 	 * changing internal timing could improve things, but the
-	 * value is misterious.
+	 * value is mysterious.
 	 * ADI930 don't support it (-EPIPE error).
 	 */
 
@@ -1743,7 +1743,7 @@ static int uea_send_cmvs_e1(struct uea_softc *sc)
 				goto out;
 		}
 	} else {
-		/* This realy should not happen */
+		/* This really should not happen */
 		uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
 		goto out;
 	}
@@ -1798,7 +1798,7 @@ static int uea_send_cmvs_e4(struct uea_softc *sc)
 				goto out;
 		}
 	} else {
-		/* This realy should not happen */
+		/* This really should not happen */
 		uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
 		goto out;
 	}
@@ -1829,7 +1829,7 @@ static int uea_start_reset(struct uea_softc *sc)
 
 	/* mask interrupt */
 	sc->booting = 1;
-	/* We need to set this here because, a ack timeout could have occured,
+	/* We need to set this here because, a ack timeout could have occurred,
 	 * but before we start the reboot, the ack occurs and set this to 1.
 	 * So we will failed to wait Ready CMV.
 	 */
diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c
index b6d49234e521..62050f7a4f97 100644
--- a/drivers/usb/c67x00/c67x00-drv.c
+++ b/drivers/usb/c67x00/c67x00-drv.c
@@ -27,7 +27,7 @@
  * the link between the common hardware parts and the subdrivers (e.g.
  * interrupt handling).
  *
- * The c67x00 has 2 SIE's (serial interface engine) wich can be configured
+ * The c67x00 has 2 SIE's (serial interface engine) which can be configured
  * to be host, device or OTG (with some limitations, E.G. only SIE1 can be OTG).
  *
  * Depending on the platform configuration, the SIE's are created and
diff --git a/drivers/usb/c67x00/c67x00-hcd.h b/drivers/usb/c67x00/c67x00-hcd.h
index 74e44621e313..e3d493d4d61a 100644
--- a/drivers/usb/c67x00/c67x00-hcd.h
+++ b/drivers/usb/c67x00/c67x00-hcd.h
@@ -34,7 +34,7 @@
 /*
  * The following parameters depend on the CPU speed, bus speed, ...
  * These can be tuned for specific use cases, e.g. if isochronous transfers
- * are very important, bandwith can be sacrificed to guarantee that the
+ * are very important, bandwidth can be sacrificed to guarantee that the
  * 1ms deadline will be met.
  * If bulk transfers are important, the MAX_FRAME_BW can be increased,
  * but some (or many) isochronous deadlines might not be met.
diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c
index f6b3c253f3fa..a03fbc15fa9c 100644
--- a/drivers/usb/c67x00/c67x00-sched.c
+++ b/drivers/usb/c67x00/c67x00-sched.c
@@ -907,7 +907,7 @@ static inline int c67x00_end_of_data(struct c67x00_td *td)
 
 /* Remove all td's from the list which come
  * after last_td and are meant for the same pipe.
- * This is used when a short packet has occured */
+ * This is used when a short packet has occurred */
 static inline void c67x00_clear_pipe(struct c67x00_hcd *c67x00,
 				     struct c67x00_td *last_td)
 {
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index f492a7f2b6ee..e057e5381465 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -297,6 +297,8 @@ static void acm_ctrl_irq(struct urb *urb)
 	if (!ACM_READY(acm))
 		goto exit;
 
+	usb_mark_last_busy(acm->dev);
+
 	data = (unsigned char *)(dr + 1);
 	switch (dr->bNotificationType) {
 	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
@@ -336,7 +338,6 @@ static void acm_ctrl_irq(struct urb *urb)
 		break;
 	}
 exit:
-	usb_mark_last_busy(acm->dev);
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
 		dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with "
@@ -533,6 +534,8 @@ static void acm_softint(struct work_struct *work)
 	if (!ACM_READY(acm))
 		return;
 	tty = tty_port_tty_get(&acm->port);
+	if (!tty)
+		return;
 	tty_wakeup(tty);
 	tty_kref_put(tty);
 }
@@ -646,8 +649,10 @@ static void acm_port_down(struct acm *acm)
 		usb_kill_urb(acm->ctrlurb);
 		for (i = 0; i < ACM_NW; i++)
 			usb_kill_urb(acm->wb[i].urb);
+		tasklet_disable(&acm->urb_task);
 		for (i = 0; i < nr; i++)
 			usb_kill_urb(acm->ru[i].urb);
+		tasklet_enable(&acm->urb_task);
 		acm->control->needs_remote_wakeup = 0;
 		usb_autopm_put_interface(acm->control);
 	}
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 5eeb570b9a61..b4ea54dbf323 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -52,7 +52,7 @@
  */
 
 /*
- * The only reason to have several buffers is to accomodate assumptions
+ * The only reason to have several buffers is to accommodate assumptions
  * in line disciplines. They ask for empty space amount, receive our URB size,
  * and proceed to issue several 1-character writes, assuming they will fit.
  * The very first write takes a complete URB. Fortunately, this only happens
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 47085e5879ab..a97c018dd419 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -281,7 +281,7 @@ static void cleanup(struct wdm_device *desc)
 			  desc->sbuf,
 			  desc->validity->transfer_dma);
 	usb_free_coherent(interface_to_usbdev(desc->intf),
-			  desc->wMaxCommand,
+			  desc->bMaxPacketSize0,
 			  desc->inbuf,
 			  desc->response->transfer_dma);
 	kfree(desc->orq);
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 6a54634ab823..385acb895ab3 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -483,7 +483,7 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf,
 		}
 
 		done += n_characters;
-		/* Terminate if end-of-message bit recieved from device */
+		/* Terminate if end-of-message bit received from device */
 		if ((buffer[8] &  0x01) && (actual >= n_characters + 12))
 			remaining = 0;
 		else
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index a3d2e2399655..96fdfb815f89 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -221,7 +221,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
 		break;
 	case USB_ENDPOINT_XFER_INT:
 		type = "Int.";
-		if (speed == USB_SPEED_HIGH)
+		if (speed == USB_SPEED_HIGH || speed == USB_SPEED_SUPER)
 			interval = 1 << (desc->bInterval - 1);
 		else
 			interval = desc->bInterval;
@@ -229,7 +229,8 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
 	default:	/* "can't happen" */
 		return start;
 	}
-	interval *= (speed == USB_SPEED_HIGH) ? 125 : 1000;
+	interval *= (speed == USB_SPEED_HIGH ||
+		     speed == USB_SPEED_SUPER) ? 125 : 1000;
 	if (interval % 1000)
 		unit = 'u';
 	else {
@@ -542,8 +543,9 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes,
 	if (level == 0) {
 		int	max;
 
-		/* high speed reserves 80%, full/low reserves 90% */
-		if (usbdev->speed == USB_SPEED_HIGH)
+		/* super/high speed reserves 80%, full/low reserves 90% */
+		if (usbdev->speed == USB_SPEED_HIGH ||
+		    usbdev->speed == USB_SPEED_SUPER)
 			max = 800;
 		else
 			max = FRAME_TIME_MAX_USECS_ALLOC;
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index a7131ad630f9..37518dfdeb98 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -802,7 +802,7 @@ static int proc_control(struct dev_state *ps, void __user *arg)
 				    tbuf, ctrl.wLength, tmo);
 		usb_lock_device(dev);
 		snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE,
-			tbuf, i);
+			  tbuf, max(i, 0));
 		if ((i > 0) && ctrl.wLength) {
 			if (copy_to_user(ctrl.data, tbuf, i)) {
 				free_page((unsigned long)tbuf);
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 38072e4e74bd..e35a17687c05 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1646,7 +1646,7 @@ static int autosuspend_check(struct usb_device *udev)
 	return 0;
 }
 
-static int usb_runtime_suspend(struct device *dev)
+int usb_runtime_suspend(struct device *dev)
 {
 	struct usb_device	*udev = to_usb_device(dev);
 	int			status;
@@ -1667,7 +1667,7 @@ static int usb_runtime_suspend(struct device *dev)
 	return status;
 }
 
-static int usb_runtime_resume(struct device *dev)
+int usb_runtime_resume(struct device *dev)
 {
 	struct usb_device	*udev = to_usb_device(dev);
 	int			status;
@@ -1679,7 +1679,7 @@ static int usb_runtime_resume(struct device *dev)
 	return status;
 }
 
-static int usb_runtime_idle(struct device *dev)
+int usb_runtime_idle(struct device *dev)
 {
 	struct usb_device	*udev = to_usb_device(dev);
 
@@ -1691,19 +1691,10 @@ static int usb_runtime_idle(struct device *dev)
 	return 0;
 }
 
-static const struct dev_pm_ops usb_bus_pm_ops = {
-	.runtime_suspend =	usb_runtime_suspend,
-	.runtime_resume =	usb_runtime_resume,
-	.runtime_idle =		usb_runtime_idle,
-};
-
 #endif /* CONFIG_USB_SUSPEND */
 
 struct bus_type usb_bus_type = {
 	.name =		"usb",
 	.match =	usb_device_match,
 	.uevent =	usb_uevent,
-#ifdef CONFIG_USB_SUSPEND
-	.pm =		&usb_bus_pm_ops,
-#endif
 };
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 02b4dbfa488a..77a7faec8d78 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -700,7 +700,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
 	/* The USB 2.0 spec says 256 ms.  This is close enough and won't
 	 * exceed that limit if HZ is 100. The math is more clunky than
 	 * maybe expected, this is to make sure that all timers for USB devices
-	 * fire at the same time to give the CPU a break inbetween */
+	 * fire at the same time to give the CPU a break in between */
 	if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
 			(length == 0 && hcd->status_urb != NULL))
 		mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
@@ -1908,7 +1908,7 @@ void usb_free_streams(struct usb_interface *interface,
 
 	/* Streams only apply to bulk endpoints. */
 	for (i = 0; i < num_eps; i++)
-		if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
+		if (!eps[i] || !usb_endpoint_xfer_bulk(&eps[i]->desc))
 			return;
 
 	hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 564eaa5525d7..93720bdc9efd 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1649,7 +1649,7 @@ void usb_disconnect(struct usb_device **pdev)
 
 	/* mark the device as inactive, so any further urb submissions for
 	 * this device (and any of its children) will fail immediately.
-	 * this quiesces everyting except pending urbs.
+	 * this quiesces everything except pending urbs.
 	 */
 	usb_set_device_state(udev, USB_STATE_NOTATTACHED);
 	dev_info(&udev->dev, "USB disconnect, device number %d\n",
@@ -2285,7 +2285,17 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 	}
 
 	/* see 7.1.7.6 */
-	status = set_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND);
+	/* Clear PORT_POWER if it's a USB3.0 device connected to USB 3.0
+	 * external hub.
+	 * FIXME: this is a temporary workaround to make the system able
+	 * to suspend/resume.
+	 */
+	if ((hub->hdev->parent != NULL) && hub_is_superspeed(hub->hdev))
+		status = clear_port_feature(hub->hdev, port1,
+						USB_PORT_FEAT_POWER);
+	else
+		status = set_port_feature(hub->hdev, port1,
+						USB_PORT_FEAT_SUSPEND);
 	if (status) {
 		dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n",
 				port1, status);
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 079cb57bab4f..d9d4b169404f 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -315,6 +315,11 @@ static const struct dev_pm_ops usb_device_pm_ops = {
 	.thaw =		usb_dev_thaw,
 	.poweroff =	usb_dev_poweroff,
 	.restore =	usb_dev_restore,
+#ifdef CONFIG_USB_SUSPEND
+	.runtime_suspend =	usb_runtime_suspend,
+	.runtime_resume =	usb_runtime_resume,
+	.runtime_idle =		usb_runtime_idle,
+#endif
 };
 
 #endif	/* CONFIG_PM */
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index a9cf484ecae4..d450b742137e 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -77,6 +77,9 @@ static inline int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 extern void usb_autosuspend_device(struct usb_device *udev);
 extern int usb_autoresume_device(struct usb_device *udev);
 extern int usb_remote_wakeup(struct usb_device *dev);
+extern int usb_runtime_suspend(struct device *dev);
+extern int usb_runtime_resume(struct device *dev);
+extern int usb_runtime_idle(struct device *dev);
 
 #else
 
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index 0bc06e2bcfcb..a6a350f5827b 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -648,7 +648,7 @@ static int ehci_reset_port(int port)
 		if (!(portsc & PORT_CONNECT))
 			return -ENOTCONN;
 
-		/* bomb out completely if something weird happend */
+		/* bomb out completely if something weird happened */
 		if ((portsc & PORT_CSC))
 			return -EINVAL;
 
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index f8dd7269d79c..6e42aab75806 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -278,7 +278,7 @@ static int udc_enable_dev_setup_interrupts(struct udc *dev)
 	return 0;
 }
 
-/* Calculates fifo start of endpoint based on preceeding endpoints */
+/* Calculates fifo start of endpoint based on preceding endpoints */
 static int udc_set_txfifo_addr(struct udc_ep *ep)
 {
 	struct udc	*dev;
@@ -2137,7 +2137,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
 	if (use_dma) {
 		/* BNA event ? */
 		if (tmp & AMD_BIT(UDC_EPSTS_BNA)) {
-			DBG(dev, "BNA ep%dout occured - DESPTR = %x \n",
+			DBG(dev, "BNA ep%dout occurred - DESPTR = %x \n",
 					ep->num, readl(&ep->regs->desptr));
 			/* clear BNA */
 			writel(tmp | AMD_BIT(UDC_EPSTS_BNA), &ep->regs->sts);
@@ -2151,7 +2151,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
 	}
 	/* HE event ? */
 	if (tmp & AMD_BIT(UDC_EPSTS_HE)) {
-		dev_err(&dev->pdev->dev, "HE ep%dout occured\n", ep->num);
+		dev_err(&dev->pdev->dev, "HE ep%dout occurred\n", ep->num);
 
 		/* clear HE */
 		writel(tmp | AMD_BIT(UDC_EPSTS_HE), &ep->regs->sts);
@@ -2354,7 +2354,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
 		/* BNA ? */
 		if (epsts & AMD_BIT(UDC_EPSTS_BNA)) {
 			dev_err(&dev->pdev->dev,
-				"BNA ep%din occured - DESPTR = %08lx \n",
+				"BNA ep%din occurred - DESPTR = %08lx \n",
 				ep->num,
 				(unsigned long) readl(&ep->regs->desptr));
 
@@ -2367,7 +2367,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
 	/* HE event ? */
 	if (epsts & AMD_BIT(UDC_EPSTS_HE)) {
 		dev_err(&dev->pdev->dev,
-			"HE ep%dn occured - DESPTR = %08lx \n",
+			"HE ep%dn occurred - DESPTR = %08lx \n",
 			ep->num, (unsigned long) readl(&ep->regs->desptr));
 
 		/* clear HE */
@@ -2384,7 +2384,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
 			req = list_entry(ep->queue.next,
 					struct udc_request, queue);
 			/*
-			 * length bytes transfered
+			 * length bytes transferred
 			 * check dma done of last desc. in PPBDU mode
 			 */
 			if (use_dma_ppb_du) {
@@ -2784,7 +2784,7 @@ static irqreturn_t udc_control_in_isr(struct udc *dev)
 					/* write fifo */
 					udc_txfifo_write(ep, &req->req);
 
-					/* lengh bytes transfered */
+					/* lengh bytes transferred */
 					len = req->req.length - req->req.actual;
 					if (len > ep->ep.maxpacket)
 						len = ep->ep.maxpacket;
diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h
index 4bbabbbfc93f..1d1c7543468e 100644
--- a/drivers/usb/gadget/amd5536udc.h
+++ b/drivers/usb/gadget/amd5536udc.h
@@ -584,7 +584,7 @@ union udc_setup_data {
  * SET and GET bitfields in u32 values
  * via constants for mask/offset:
  * <bit_field_stub_name> is the text between
- * UDC_ and _MASK|_OFS of appropiate
+ * UDC_ and _MASK|_OFS of appropriate
  * constant
  *
  * set bitfield value in u32 u32Val
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index bb8ddf0469f9..9b7cdb16f26b 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -826,7 +826,7 @@ done:
 	return status;
 }
 
-/* reinit == restore inital software state */
+/* reinit == restore initial software state */
 static void udc_reinit(struct at91_udc *udc)
 {
 	u32 i;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index c2251c40a205..82314ed22506 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -42,7 +42,7 @@
 static struct usb_composite_driver *composite;
 static int (*composite_gadget_bind)(struct usb_composite_dev *cdev);
 
-/* Some systems will need runtime overrides for the  product identifers
+/* Some systems will need runtime overrides for the  product identifiers
  * published in the device descriptor, either numbers or strings or both.
  * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
@@ -205,14 +205,14 @@ int usb_function_activate(struct usb_function *function)
  * usb_interface_id() is called from usb_function.bind() callbacks to
  * allocate new interface IDs.  The function driver will then store that
  * ID in interface, association, CDC union, and other descriptors.  It
- * will also handle any control requests targetted at that interface,
+ * will also handle any control requests targeted at that interface,
  * particularly changing its altsetting via set_alt().  There may
  * also be class-specific or vendor-specific requests to handle.
  *
  * All interface identifier should be allocated using this routine, to
  * ensure that for example different functions don't wrongly assign
  * different meanings to the same identifier.  Note that since interface
- * identifers are configuration-specific, functions used in more than
+ * identifiers are configuration-specific, functions used in more than
  * one configuration (or more than once in a given configuration) need
  * multiple versions of the relevant descriptors.
  *
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index 00975ed903d1..0111f8a9cf7f 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -706,6 +706,7 @@ f_audio_unbind(struct usb_configuration *c, struct usb_function *f)
 	struct f_audio		*audio = func_to_audio(f);
 
 	usb_free_descriptors(f->descriptors);
+	usb_free_descriptors(f->hs_descriptors);
 	kfree(audio);
 }
 
@@ -742,7 +743,7 @@ int __init control_selector_init(struct f_audio *audio)
 }
 
 /**
- * audio_bind_config - add USB audio fucntion to a configuration
+ * audio_bind_config - add USB audio function to a configuration
  * @c: the configuration to supcard the USB audio function
  * Context: single threaded during gadget setup
  *
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index 95dd4662d6a8..b3c304290150 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -314,6 +314,9 @@ eem_unbind(struct usb_configuration *c, struct usb_function *f)
 
 static void eem_cmd_complete(struct usb_ep *ep, struct usb_request *req)
 {
+	struct sk_buff *skb = (struct sk_buff *)req->context;
+
+	dev_kfree_skb_any(skb);
 }
 
 /*
@@ -428,10 +431,11 @@ static int eem_unwrap(struct gether *port,
 				skb_trim(skb2, len);
 				put_unaligned_le16(BIT(15) | BIT(11) | len,
 							skb_push(skb2, 2));
-				skb_copy_bits(skb, 0, req->buf, skb->len);
-				req->length = skb->len;
+				skb_copy_bits(skb2, 0, req->buf, skb2->len);
+				req->length = skb2->len;
 				req->complete = eem_cmd_complete;
 				req->zero = 1;
+				req->context = skb2;
 				if (usb_ep_queue(port->in_ep, req, GFP_ATOMIC))
 					DBG(cdev, "echo response queue fail\n");
 				break;
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index 130eee678c8b..86902a60bcdb 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -111,7 +111,7 @@ static inline unsigned ncm_bitrate(struct usb_gadget *g)
 #define NTB_OUT_SIZE		16384
 
 /*
- * skbs of size less than that will not be alligned
+ * skbs of size less than that will not be aligned
  * to NCM's dwNtbInMaxSize to save bus bandwidth
  */
 
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index aee7e3c53c38..36613b37c504 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -1148,6 +1148,12 @@ static int qe_ep_tx(struct qe_ep *ep, struct qe_frame *frame)
 static int txcomplete(struct qe_ep *ep, unsigned char restart)
 {
 	if (ep->tx_req != NULL) {
+		struct qe_req *req = ep->tx_req;
+		unsigned zlp = 0, last_len = 0;
+
+		last_len = min_t(unsigned, req->req.length - ep->sent,
+				ep->ep.maxpacket);
+
 		if (!restart) {
 			int asent = ep->last;
 			ep->sent += asent;
@@ -1156,9 +1162,18 @@ static int txcomplete(struct qe_ep *ep, unsigned char restart)
 			ep->last = 0;
 		}
 
+		/* zlp needed when req->re.zero is set */
+		if (req->req.zero) {
+			if (last_len == 0 ||
+				(req->req.length % ep->ep.maxpacket) != 0)
+				zlp = 0;
+			else
+				zlp = 1;
+		} else
+			zlp = 0;
+
 		/* a request already were transmitted completely */
-		if ((ep->tx_req->req.length - ep->sent) <= 0) {
-			ep->tx_req->req.actual = (unsigned int)ep->sent;
+		if (((ep->tx_req->req.length - ep->sent) <= 0) && !zlp) {
 			done(ep, ep->tx_req, 0);
 			ep->tx_req = NULL;
 			ep->last = 0;
@@ -1191,6 +1206,7 @@ static int qe_usb_senddata(struct qe_ep *ep, struct qe_frame *frame)
 	buf = (u8 *)ep->tx_req->req.buf + ep->sent;
 	if (buf && size) {
 		ep->last = size;
+		ep->tx_req->req.actual += size;
 		frame_set_data(frame, buf);
 		frame_set_length(frame, size);
 		frame_set_status(frame, FRAME_OK);
diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h
index bea5b827bebe..e35e24fd64bb 100644
--- a/drivers/usb/gadget/fsl_qe_udc.h
+++ b/drivers/usb/gadget/fsl_qe_udc.h
@@ -208,14 +208,14 @@ struct qe_frame{
 /* Frame status field */
 /* Receive side */
 #define FRAME_OK               0x00000000 /* Frame tranmitted or received OK */
-#define FRAME_ERROR            0x80000000 /* Error occured on frame */
+#define FRAME_ERROR            0x80000000 /* Error occurred on frame */
 #define START_FRAME_LOST       0x40000000 /* START_FRAME_LOST */
 #define END_FRAME_LOST         0x20000000 /* END_FRAME_LOST */
 #define RX_ER_NONOCT           0x10000000 /* Rx Non Octet Aligned Packet */
 #define RX_ER_BITSTUFF         0x08000000 /* Frame Aborted --Received packet
 					     with bit stuff error */
 #define RX_ER_CRC              0x04000000 /* Received packet with CRC error */
-#define RX_ER_OVERUN           0x02000000 /* Over-run occured on reception */
+#define RX_ER_OVERUN           0x02000000 /* Over-run occurred on reception */
 #define RX_ER_PID              0x01000000 /* Wrong PID received */
 /* Tranmit side */
 #define TX_ER_NAK              0x00800000 /* Received NAK handshake */
@@ -379,7 +379,7 @@ struct qe_udc {
 #define T_LSP         0x01000000         /* Low-speed transaction */
 #define T_PID         0x00c00000         /* packet id */
 #define T_NAK         0x00100000         /* No ack. */
-#define T_STAL        0x00080000         /* Stall recieved */
+#define T_STAL        0x00080000         /* Stall received */
 #define T_TO          0x00040000         /* time out */
 #define T_UN          0x00020000         /* underrun */
 
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 912cb8e63fe3..07499c1cdcc4 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -464,7 +464,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
 
 	max = le16_to_cpu(desc->wMaxPacketSize);
 
-	/* Disable automatic zlp generation.  Driver is reponsible to indicate
+	/* Disable automatic zlp generation.  Driver is responsible to indicate
 	 * explicitly through req->req.zero.  This is needed to enable multi-td
 	 * request. */
 	zlt = 1;
@@ -648,7 +648,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
 			| EP_QUEUE_HEAD_STATUS_HALT));
 	dQH->size_ioc_int_sts &= temp;
 
-	/* Ensure that updates to the QH will occure before priming. */
+	/* Ensure that updates to the QH will occur before priming. */
 	wmb();
 
 	/* Prime endpoint by writing 1 to ENDPTPRIME */
@@ -1459,7 +1459,7 @@ static int process_ep_req(struct fsl_udc *udc, int pipe,
 				status = -EILSEQ;
 				break;
 			} else
-				ERR("Unknown error has occured (0x%x)!\n",
+				ERR("Unknown error has occurred (0x%x)!\n",
 					errors);
 
 		} else if (le32_to_cpu(curr_td->size_ioc_sts)
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index 20aeceed48c7..e88cce5c2c0d 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -15,7 +15,7 @@ struct usb_dr_device {
 	u8 res1[256];
 	u16 caplength;		/* Capability Register Length */
 	u16 hciversion;		/* Host Controller Interface Version */
-	u32 hcsparams;		/* Host Controller Structual Parameters */
+	u32 hcsparams;		/* Host Controller Structural Parameters */
 	u32 hccparams;		/* Host Controller Capability Parameters */
 	u8 res2[20];
 	u32 dciversion;		/* Device Controller Interface Version */
@@ -52,7 +52,7 @@ struct usb_dr_host {
 	u8 res1[256];
 	u16 caplength;		/* Capability Register Length */
 	u16 hciversion;		/* Host Controller Interface Version */
-	u32 hcsparams;		/* Host Controller Structual Parameters */
+	u32 hcsparams;		/* Host Controller Structural Parameters */
 	u32 hccparams;		/* Host Controller Capability Parameters */
 	u8 res2[20];
 	u32 dciversion;		/* Device Controller Interface Version */
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 0ab7e141d494..47b86b99d449 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -67,7 +67,7 @@ MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter.");
 module_param(id, charp, 0444);
 MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter.");
 
-/* Some systems will want different product identifers published in the
+/* Some systems will want different product identifiers published in the
  * device descriptor, either numbers or strings or both.  These string
  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 3ed73f49cf18..a01383f71f38 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -386,8 +386,10 @@ ep_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 
 	/* halt any endpoint by doing a "wrong direction" i/o call */
 	if (usb_endpoint_dir_in(&data->desc)) {
-		if (usb_endpoint_xfer_isoc(&data->desc))
+		if (usb_endpoint_xfer_isoc(&data->desc)) {
+			mutex_unlock(&data->lock);
 			return -EINVAL;
+		}
 		DBG (data->dev, "%s halt\n", data->name);
 		spin_lock_irq (&data->dev->lock);
 		if (likely (data->ep != NULL))
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 1eca8b47ce3c..9cee88a43a73 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -642,7 +642,7 @@ static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
 	dqh->dtd_status &= dtd_status;
 	dev_vdbg(&dev->pdev->dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
 
-	/* ensure that updates to the dQH will occure before priming */
+	/* ensure that updates to the dQH will occur before priming */
 	wmb();
 
 	/* write 1 to endptprime register to PRIME endpoint */
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index d5468a7f38e0..b62b2640deb0 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -325,7 +325,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 
 			/*
 			 * Ensure that updates to the QH will
-			 * occure before priming.
+			 * occur before priming.
 			 */
 			wmb();
 
@@ -338,7 +338,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 			& EP_QUEUE_HEAD_NEXT_POINTER_MASK;;
 		dqh->size_ioc_int_sts = 0;
 
-		/* Ensure that updates to the QH will occure before priming. */
+		/* Ensure that updates to the QH will occur before priming. */
 		wmb();
 
 		/* Prime the Endpoint */
@@ -1845,7 +1845,7 @@ static irqreturn_t mv_udc_irq(int irq, void *dev)
 		return IRQ_NONE;
 	}
 
-	/* Clear all the interrupts occured */
+	/* Clear all the interrupts occurred */
 	writel(status, &udc->op_regs->usbsts);
 
 	if (status & USBSTS_ERR)
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index d09155b25d73..24696f7fa6a9 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -117,7 +117,7 @@ module_param (fifo_mode, ushort, 0644);
 
 /* enable_suspend -- When enabled, the driver will respond to
  * USB suspend requests by powering down the NET2280.  Otherwise,
- * USB suspend requests will be ignored.  This is acceptible for
+ * USB suspend requests will be ignored.  This is acceptable for
  * self-powered devices
  */
 static int enable_suspend = 0;
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index b5364f9d7cd2..55ca63ad3506 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -203,7 +203,7 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
 		goto err_usb;
 	}
 
-	/* finaly register the configuration */
+	/* finally register the configuration */
 	status = usb_add_config(cdev, &nokia_config_500ma_driver,
 			nokia_bind_config);
 	if (status < 0)
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 3e4b35e50c24..68dbcc3e4cc2 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -1608,7 +1608,7 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
 		return -EINVAL;
 	if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN))
 		return -ESHUTDOWN;
-	spin_lock_irqsave(&ep->dev->lock, iflags);
+	spin_lock_irqsave(&dev->lock, iflags);
 	/* map the buffer for dma */
 	if (usbreq->length &&
 	    ((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) {
@@ -1625,8 +1625,10 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
 							     DMA_FROM_DEVICE);
 		} else {
 			req->buf = kzalloc(usbreq->length, GFP_ATOMIC);
-			if (!req->buf)
-				return -ENOMEM;
+			if (!req->buf) {
+				retval = -ENOMEM;
+				goto probe_end;
+			}
 			if (ep->in) {
 				memcpy(req->buf, usbreq->buf, usbreq->length);
 				req->dma = dma_map_single(&dev->pdev->dev,
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 12ff6cffedc9..c3f2bd42bd5a 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -126,7 +126,7 @@ static struct printer_dev usb_printer_gadget;
 #define PRINTER_VENDOR_NUM	0x0525		/* NetChip */
 #define PRINTER_PRODUCT_NUM	0xa4a8		/* Linux-USB Printer Gadget */
 
-/* Some systems will want different product identifers published in the
+/* Some systems will want different product identifiers published in the
  * device descriptor, either numbers or strings or both.  These string
  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index b37f92cb71bc..444b60aa15e9 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -139,24 +139,6 @@ static const char ep0name [] = "ep0";
 static void pxa25x_ep_fifo_flush (struct usb_ep *ep);
 static void nuke (struct pxa25x_ep *, int status);
 
-/* one GPIO should be used to detect VBUS from the host */
-static int is_vbus_present(void)
-{
-	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
-
-	if (gpio_is_valid(mach->gpio_vbus)) {
-		int value = gpio_get_value(mach->gpio_vbus);
-
-		if (mach->gpio_vbus_inverted)
-			return !value;
-		else
-			return !!value;
-	}
-	if (mach->udc_is_connected)
-		return mach->udc_is_connected();
-	return 1;
-}
-
 /* one GPIO should control a D+ pullup, so host sees this device (or not) */
 static void pullup_off(void)
 {
@@ -1055,7 +1037,7 @@ udc_seq_show(struct seq_file *m, void *_d)
 		"%s version: %s\nGadget driver: %s\nHost %s\n\n",
 		driver_name, DRIVER_VERSION SIZE_STR "(pio)",
 		dev->driver ? dev->driver->driver.name : "(none)",
-		is_vbus_present() ? "full speed" : "disconnected");
+		dev->gadget.speed == USB_SPEED_FULL ? "full speed" : "disconnected");
 
 	/* registers for device and ep0 */
 	seq_printf(m,
@@ -1094,7 +1076,7 @@ udc_seq_show(struct seq_file *m, void *_d)
 			(tmp & UDCCFR_ACM) ? " acm" : "");
 	}
 
-	if (!is_vbus_present() || !dev->driver)
+	if (dev->gadget.speed != USB_SPEED_FULL || !dev->driver)
 		goto done;
 
 	seq_printf(m, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
@@ -1435,14 +1417,6 @@ lubbock_vbus_irq(int irq, void *_dev)
 
 #endif
 
-static irqreturn_t udc_vbus_irq(int irq, void *_dev)
-{
-	struct pxa25x_udc	*dev = _dev;
-
-	pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present());
-	return IRQ_HANDLED;
-}
-
 
 /*-------------------------------------------------------------------------*/
 
@@ -1766,12 +1740,9 @@ pxa25x_udc_irq(int irq, void *_dev)
 		if (unlikely(udccr & UDCCR_SUSIR)) {
 			udc_ack_int_UDCCR(UDCCR_SUSIR);
 			handled = 1;
-			DBG(DBG_VERBOSE, "USB suspend%s\n", is_vbus_present()
-				? "" : "+disconnect");
+			DBG(DBG_VERBOSE, "USB suspend\n");
 
-			if (!is_vbus_present())
-				stop_activity(dev, dev->driver);
-			else if (dev->gadget.speed != USB_SPEED_UNKNOWN
+			if (dev->gadget.speed != USB_SPEED_UNKNOWN
 					&& dev->driver
 					&& dev->driver->suspend)
 				dev->driver->suspend(&dev->gadget);
@@ -1786,8 +1757,7 @@ pxa25x_udc_irq(int irq, void *_dev)
 
 			if (dev->gadget.speed != USB_SPEED_UNKNOWN
 					&& dev->driver
-					&& dev->driver->resume
-					&& is_vbus_present())
+					&& dev->driver->resume)
 				dev->driver->resume(&dev->gadget);
 		}
 
@@ -2137,7 +2107,7 @@ static struct pxa25x_udc memory = {
 static int __init pxa25x_udc_probe(struct platform_device *pdev)
 {
 	struct pxa25x_udc *dev = &memory;
-	int retval, vbus_irq, irq;
+	int retval, irq;
 	u32 chiprev;
 
 	/* insist on Intel/ARM/XScale */
@@ -2199,19 +2169,6 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 
 	dev->transceiver = otg_get_transceiver();
 
-	if (gpio_is_valid(dev->mach->gpio_vbus)) {
-		if ((retval = gpio_request(dev->mach->gpio_vbus,
-				"pxa25x_udc GPIO VBUS"))) {
-			dev_dbg(&pdev->dev,
-				"can't get vbus gpio %d, err: %d\n",
-				dev->mach->gpio_vbus, retval);
-			goto err_gpio_vbus;
-		}
-		gpio_direction_input(dev->mach->gpio_vbus);
-		vbus_irq = gpio_to_irq(dev->mach->gpio_vbus);
-	} else
-		vbus_irq = 0;
-
 	if (gpio_is_valid(dev->mach->gpio_pullup)) {
 		if ((retval = gpio_request(dev->mach->gpio_pullup,
 				"pca25x_udc GPIO PULLUP"))) {
@@ -2237,7 +2194,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	udc_disable(dev);
 	udc_reinit(dev);
 
-	dev->vbus = !!is_vbus_present();
+	dev->vbus = 0;
 
 	/* irq setup after old hardware state is cleaned up */
 	retval = request_irq(irq, pxa25x_udc_irq,
@@ -2273,22 +2230,10 @@ lubbock_fail0:
 		}
 	} else
 #endif
-	if (vbus_irq) {
-		retval = request_irq(vbus_irq, udc_vbus_irq,
-				IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				driver_name, dev);
-		if (retval != 0) {
-			pr_err("%s: can't get irq %i, err %d\n",
-				driver_name, vbus_irq, retval);
-			goto err_vbus_irq;
-		}
-	}
 	create_debug_files(dev);
 
 	return 0;
 
- err_vbus_irq:
 #ifdef	CONFIG_ARCH_LUBBOCK
 	free_irq(LUBBOCK_USB_DISC_IRQ, dev);
  err_irq_lub:
@@ -2298,9 +2243,6 @@ lubbock_fail0:
 	if (gpio_is_valid(dev->mach->gpio_pullup))
 		gpio_free(dev->mach->gpio_pullup);
  err_gpio_pullup:
-	if (gpio_is_valid(dev->mach->gpio_vbus))
-		gpio_free(dev->mach->gpio_vbus);
- err_gpio_vbus:
 	if (dev->transceiver) {
 		otg_put_transceiver(dev->transceiver);
 		dev->transceiver = NULL;
@@ -2337,10 +2279,6 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
 		free_irq(LUBBOCK_USB_IRQ, dev);
 	}
 #endif
-	if (gpio_is_valid(dev->mach->gpio_vbus)) {
-		free_irq(gpio_to_irq(dev->mach->gpio_vbus), dev);
-		gpio_free(dev->mach->gpio_vbus);
-	}
 	if (gpio_is_valid(dev->mach->gpio_pullup))
 		gpio_free(dev->mach->gpio_pullup);
 
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 2efd6732d130..78a39a41547d 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -602,7 +602,7 @@ static void inc_ep_stats_reqs(struct pxa_ep *ep, int is_in)
 /**
  * inc_ep_stats_bytes - Update ep stats counts
  * @ep: physical endpoint
- * @count: bytes transfered on endpoint
+ * @count: bytes transferred on endpoint
  * @is_in: ep direction (USB_DIR_IN or 0)
  */
 static void inc_ep_stats_bytes(struct pxa_ep *ep, int count, int is_in)
@@ -877,7 +877,7 @@ static void nuke(struct pxa_ep *ep, int status)
  * If there is less space in request than bytes received in OUT endpoint,
  * bytes are left in the OUT endpoint.
  *
- * Returns how many bytes were actually transfered
+ * Returns how many bytes were actually transferred
  */
 static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
 {
@@ -914,7 +914,7 @@ static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
  * endpoint. If there are no bytes to transfer, doesn't write anything
  * to physical endpoint.
  *
- * Returns how many bytes were actually transfered.
+ * Returns how many bytes were actually transferred.
  */
 static int write_packet(struct pxa_ep *ep, struct pxa27x_request *req,
 			unsigned int max)
@@ -991,7 +991,7 @@ static int read_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
  * caller guarantees at least one packet buffer is ready (or a zlp).
  * Doesn't complete the request, that's the caller's job
  *
- * Returns 1 if request fully transfered, 0 if partial transfer
+ * Returns 1 if request fully transferred, 0 if partial transfer
  */
 static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
 {
@@ -1094,7 +1094,7 @@ static int read_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
  * Sends a request (or a part of the request) to the control endpoint (ep0 in).
  * If the request doesn't fit, the remaining part will be sent from irq.
  * The request is considered fully written only if either :
- *   - last write transfered all remaining bytes, but fifo was not fully filled
+ *   - last write transferred all remaining bytes, but fifo was not fully filled
  *   - last write was a 0 length write
  *
  * Returns 1 if request fully written, 0 if request only partially sent
@@ -1548,7 +1548,7 @@ static int pxa_udc_get_frame(struct usb_gadget *_gadget)
  * pxa_udc_wakeup - Force udc device out of suspend
  * @_gadget: usb gadget
  *
- * Returns 0 if successfull, error code otherwise
+ * Returns 0 if successful, error code otherwise
  */
 static int pxa_udc_wakeup(struct usb_gadget *_gadget)
 {
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 015118535f77..6dcc1f68fa60 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1083,7 +1083,9 @@ static void irq_device_state(struct r8a66597 *r8a66597)
 
 	if (dvsq == DS_DFLT) {
 		/* bus reset */
+		spin_unlock(&r8a66597->lock);
 		r8a66597->driver->disconnect(&r8a66597->gadget);
+		spin_lock(&r8a66597->lock);
 		r8a66597_update_usb_speed(r8a66597);
 	}
 	if (r8a66597->old_dvsq == DS_CNFG && dvsq != DS_CNFG)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index ef825c3baed9..0912679de99a 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -41,8 +41,8 @@
 /* EP0_MPS_LIMIT
  *
  * Unfortunately there seems to be a limit of the amount of data that can
- * be transfered by IN transactions on EP0. This is either 127 bytes or 3
- * packets (which practially means 1 packet and 63 bytes of data) when the
+ * be transferred by IN transactions on EP0. This is either 127 bytes or 3
+ * packets (which practically means 1 packet and 63 bytes of data) when the
  * MPS is set to 64.
  *
  * This means if we are wanting to move >127 bytes of data, we need to
@@ -783,7 +783,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
 		       hsotg->regs + S3C_DIEPINT(index));
 
 	/* Note, trying to clear the NAK here causes problems with transmit
-	 * on the S3C6400 ending up with the TXFIFO becomming full. */
+	 * on the S3C6400 ending up with the TXFIFO becoming full. */
 
 	/* check ep is enabled */
 	if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna))
@@ -1176,10 +1176,10 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
 		writel(ctrl, hsotg->regs + reg);
 
 		dev_dbg(hsotg->dev,
-			"writen DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
+			"written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
 			ctrl, reg, readl(hsotg->regs + reg));
 
-		/* don't belive we need to anything more to get the EP
+		/* don't believe we need to anything more to get the EP
 		 * to reply with a STALL packet */
 	}
 }
@@ -1416,7 +1416,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
  * transaction.
  *
  * Note, since we don't write any data to the TxFIFO, then it is
- * currently belived that we do not need to wait for any space in
+ * currently believed that we do not need to wait for any space in
  * the TxFIFO.
  */
 static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
@@ -1540,7 +1540,7 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
  * that requires processing, so find out what is in there and do the
  * appropriate read.
  *
- * The RXFIFO is a true FIFO, the packets comming out are still in packet
+ * The RXFIFO is a true FIFO, the packets coming out are still in packet
  * chunks, so if you have x packets received on an endpoint you'll get x
  * FIFO events delivered, each with a packet's worth of data in it.
  *
@@ -2188,7 +2188,7 @@ irq_retry:
 
 	/* these next two seem to crop-up occasionally causing the core
 	 * to shutdown the USB transfer, so try clearing them and logging
-	 * the occurence. */
+	 * the occurrence. */
 
 	if (gintsts & S3C_GINTSTS_GOUTNakEff) {
 		dev_info(hsotg->dev, "GOUTNakEff triggered\n");
@@ -2469,7 +2469,7 @@ static struct usb_ep_ops s3c_hsotg_ep_ops = {
 	.queue		= s3c_hsotg_ep_queue,
 	.dequeue	= s3c_hsotg_ep_dequeue,
 	.set_halt	= s3c_hsotg_ep_sethalt,
-	/* note, don't belive we have any call for the fifo routines */
+	/* note, don't believe we have any call for the fifo routines */
 };
 
 /**
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 9483acdf2e9e..e0e0787b724b 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -402,7 +402,7 @@ config FHCI_DEBUG
 	depends on USB_FHCI_HCD && DEBUG_FS
 	help
 	  Say "y" to see some FHCI debug information and statistics
-	  throught debugfs.
+	  through debugfs.
 
 config USB_U132_HCD
 	tristate "Elan U132 Adapter Host Controller"
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index fe99895fb098..42abd0f603bf 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -315,7 +315,6 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	int			stopped;
 	unsigned		count = 0;
 	u8			state;
-	const __le32		halt = HALT_BIT(ehci);
 	struct ehci_qh_hw	*hw = qh->hw;
 
 	if (unlikely (list_empty (&qh->qtd_list)))
@@ -422,7 +421,6 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 					&& !(qtd->hw_alt_next
 						& EHCI_LIST_END(ehci))) {
 				stopped = 1;
-				goto halt;
 			}
 
 		/* stop scanning when we reach qtds the hc is using */
@@ -456,16 +454,6 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 				 */
 				ehci_clear_tt_buffer(ehci, qh, urb, token);
 			}
-
-			/* force halt for unlinked or blocked qh, so we'll
-			 * patch the qh later and so that completions can't
-			 * activate it while we "know" it's stopped.
-			 */
-			if ((halt & hw->hw_token) == 0) {
-halt:
-				hw->hw_token |= halt;
-				wmb ();
-			}
 		}
 
 		/* unless we already know the urb's status, collect qtd status
@@ -1259,24 +1247,27 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 static void scan_async (struct ehci_hcd *ehci)
 {
+	bool			stopped;
 	struct ehci_qh		*qh;
 	enum ehci_timer_action	action = TIMER_IO_WATCHDOG;
 
 	ehci->stamp = ehci_readl(ehci, &ehci->regs->frame_index);
 	timer_action_done (ehci, TIMER_ASYNC_SHRINK);
 rescan:
+	stopped = !HC_IS_RUNNING(ehci_to_hcd(ehci)->state);
 	qh = ehci->async->qh_next.qh;
 	if (likely (qh != NULL)) {
 		do {
 			/* clean any finished work for this qh */
-			if (!list_empty (&qh->qtd_list)
-					&& qh->stamp != ehci->stamp) {
+			if (!list_empty(&qh->qtd_list) && (stopped ||
+					qh->stamp != ehci->stamp)) {
 				int temp;
 
 				/* unlinks could happen here; completion
 				 * reporting drops the lock.  rescan using
 				 * the latest schedule, but don't rescan
-				 * qhs we already finished (no looping).
+				 * qhs we already finished (no looping)
+				 * unless the controller is stopped.
 				 */
 				qh = qh_get (qh);
 				qh->stamp = ehci->stamp;
@@ -1297,9 +1288,9 @@ rescan:
 			 */
 			if (list_empty(&qh->qtd_list)
 					&& qh->qh_state == QH_STATE_LINKED) {
-				if (!ehci->reclaim
-					&& ((ehci->stamp - qh->stamp) & 0x1fff)
-						>= (EHCI_SHRINK_FRAMES * 8))
+				if (!ehci->reclaim && (stopped ||
+					((ehci->stamp - qh->stamp) & 0x1fff)
+						>= EHCI_SHRINK_FRAMES * 8))
 					start_unlink_async(ehci, qh);
 				else
 					action = TIMER_ASYNC_SHRINK;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index f86d3fa20214..333ddc156919 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -644,7 +644,7 @@ static inline void ehci_writel(const struct ehci_hcd *ehci,
 /*
  * On certain ppc-44x SoC there is a HW issue, that could only worked around with
  * explicit suspend/operate of OHCI. This function hereby makes sense only on that arch.
- * Other common bits are dependant on has_amcc_usb23 quirk flag.
+ * Other common bits are dependent on has_amcc_usb23 quirk flag.
  */
 #ifdef CONFIG_44x
 static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index b84ff7e51896..19223c7449e1 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -401,7 +401,7 @@ static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 		/* 1 td fro setup,1 for ack */
 		size = 2;
 	case PIPE_BULK:
-		/* one td for every 4096 bytes(can be upto 8k) */
+		/* one td for every 4096 bytes(can be up to 8k) */
 		size += urb->transfer_buffer_length / 4096;
 		/* ...add for any remaining bytes... */
 		if ((urb->transfer_buffer_length % 4096) != 0)
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index 38fe058fbe61..0ea577bfca2a 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -40,7 +40,7 @@
 #define TD_RXER		0x0020 /* Rx error or not */
 
 #define TD_NAK		0x0010 /* No ack. */
-#define TD_STAL		0x0008 /* Stall recieved */
+#define TD_STAL		0x0008 /* Stall received */
 #define TD_TO		0x0004 /* time out */
 #define TD_UN		0x0002 /* underrun */
 #define TD_NO		0x0010 /* Rx Non Octet Aligned Packet */
@@ -274,7 +274,7 @@ void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
  * It is also preparing the TDs for new frames. If the Tx interrupts
  * are disabled, the application should call that routine to get
  * confirmation about the submitted frames. Otherwise, the routine is
- * called frome the interrupt service routine during the Tx interrupt.
+ * called from the interrupt service routine during the Tx interrupt.
  * In that case the application is informed by calling the application
  * specific 'fhci_transaction_confirm' routine
  */
@@ -337,7 +337,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb)
 					pkt->status = USB_TD_RX_ER_NONOCT;
 				else
 					fhci_err(usb->fhci, "illegal error "
-						 "occured\n");
+						 "occurred\n");
 			} else if (td_status & TD_NAK)
 				pkt->status = USB_TD_TX_ER_NAK;
 			else if (td_status & TD_TO)
@@ -347,7 +347,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb)
 			else if (td_status & TD_STAL)
 				pkt->status = USB_TD_TX_ER_STALL;
 			else
-				fhci_err(usb->fhci, "illegal error occured\n");
+				fhci_err(usb->fhci, "illegal error occurred\n");
 		} else if ((extra_data & TD_TOK_IN) &&
 				pkt->len > td_length - CRC_SIZE) {
 			pkt->status = USB_TD_RX_DATA_UNDERUN;
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
index 71c3caaea4c1..dc6939a44a1a 100644
--- a/drivers/usb/host/fhci.h
+++ b/drivers/usb/host/fhci.h
@@ -82,7 +82,7 @@
 #define USB_TD_RX_ER_NONOCT	0x40000000 /* Tx Non Octet Aligned Packet */
 #define USB_TD_RX_ER_BITSTUFF	0x20000000 /* Frame Aborted-Received pkt */
 #define USB_TD_RX_ER_CRC	0x10000000 /* CRC error */
-#define USB_TD_RX_ER_OVERUN	0x08000000 /* Over - run occured */
+#define USB_TD_RX_ER_OVERUN	0x08000000 /* Over - run occurred */
 #define USB_TD_RX_ER_PID	0x04000000 /* wrong PID received */
 #define USB_TD_RX_DATA_UNDERUN	0x02000000 /* shorter than expected */
 #define USB_TD_RX_DATA_OVERUN	0x01000000 /* longer than expected */
@@ -363,7 +363,7 @@ struct ed {
 struct td {
 	void *data;		 /* a pointer to the data buffer */
 	unsigned int len;	 /* length of the data to be submitted */
-	unsigned int actual_len; /* actual bytes transfered on this td */
+	unsigned int actual_len; /* actual bytes transferred on this td */
 	enum fhci_ta_type type;	 /* transaction type */
 	u8 toggle;		 /* toggle for next trans. within this TD */
 	u16 iso_index;		 /* ISO transaction index */
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index 2562e92e3178..af05718bdc73 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1323,7 +1323,7 @@ static void process_etds(struct usb_hcd *hcd, struct imx21 *imx21, int sof)
  * (and hence no interrupt occurs).
  * This causes the transfer in question to hang.
  * The kludge below checks for this condition at each SOF and processes any
- * blocked ETDs (after an arbitary 10 frame wait)
+ * blocked ETDs (after an arbitrary 10 frame wait)
  *
  * With a single active transfer the usbtest test suite will run for days
  * without the kludge.
diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
index 12db961acdfb..9a2c400e6090 100644
--- a/drivers/usb/host/isp116x.h
+++ b/drivers/usb/host/isp116x.h
@@ -13,7 +13,7 @@
 
 /* Full speed: max # of bytes to transfer for a single urb
    at a time must be < 1024 && must be multiple of 64.
-   832 allows transfering 4kiB within 5 frames. */
+   832 allows transferring 4kiB within 5 frames. */
 #define MAX_TRANSFER_SIZE_FULLSPEED	832
 
 /* Low speed: there is no reason to schedule in very big
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 662cd002adfc..f97570a847ca 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -546,7 +546,7 @@ static void postproc_ep(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep)
 			if (usb_pipecontrol(urb->pipe)) {
 				ep->nextpid = USB_PID_ACK;
 				/* save the data underrun error code for later and
-				 * procede with the status stage
+				 * proceed with the status stage
 				 */
 				urb->actual_length += PTD_GET_COUNT(ptd);
 				BUG_ON(urb->actual_length > urb->transfer_buffer_length);
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index f50e84ac570a..795345ad45e6 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -295,7 +295,7 @@ static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
 	}
 
 	dev_err(hcd->self.controller,
-				"%s: Can not allocate %lu bytes of memory\n"
+				"%s: Cannot allocate %zu bytes of memory\n"
 				"Current memory map:\n",
 				__func__, qtd->length);
 	for (i = 0; i < BLOCKS; i++) {
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 17a6043c1fa0..958d985f2951 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -33,7 +33,7 @@
 
 #ifdef __LITTLE_ENDIAN
 #define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
-#elif __BIG_ENDIAN
+#elif defined(__BIG_ENDIAN)
 #define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | \
 			  USBH_ENABLE_BE)
 #else
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index e7288639edb0..d55723514860 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -162,7 +162,7 @@ static int ohci_urb_enqueue (
 		// case PIPE_INTERRUPT:
 		// case PIPE_BULK:
 		default:
-			/* one TD for every 4096 Bytes (can be upto 8K) */
+			/* one TD for every 4096 Bytes (can be up to 8K) */
 			size += urb->transfer_buffer_length / 4096;
 			/* ... and for any remaining bytes ... */
 			if ((urb->transfer_buffer_length % 4096) != 0)
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index 8dabe8e31d8c..3558491dd87d 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -185,7 +185,7 @@ static struct platform_driver ohci_hcd_tmio_driver;
 
 static int __devinit ohci_hcd_tmio_drv_probe(struct platform_device *dev)
 {
-	struct mfd_cell *cell = dev->dev.platform_data;
+	const struct mfd_cell *cell = mfd_get_cell(dev);
 	struct resource *regs = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	struct resource *config = platform_get_resource(dev, IORESOURCE_MEM, 1);
 	struct resource *sram = platform_get_resource(dev, IORESOURCE_MEM, 2);
@@ -274,7 +274,7 @@ static int __devexit ohci_hcd_tmio_drv_remove(struct platform_device *dev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct tmio_hcd *tmio = hcd_to_tmio(hcd);
-	struct mfd_cell *cell = dev->dev.platform_data;
+	const struct mfd_cell *cell = mfd_get_cell(dev);
 
 	usb_remove_hcd(hcd);
 	tmio_stop_hc(dev);
@@ -293,7 +293,7 @@ static int __devexit ohci_hcd_tmio_drv_remove(struct platform_device *dev)
 #ifdef CONFIG_PM
 static int ohci_hcd_tmio_drv_suspend(struct platform_device *dev, pm_message_t state)
 {
-	struct mfd_cell *cell = dev->dev.platform_data;
+	const struct mfd_cell *cell = mfd_get_cell(dev);
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 	struct tmio_hcd *tmio = hcd_to_tmio(hcd);
@@ -326,7 +326,7 @@ static int ohci_hcd_tmio_drv_suspend(struct platform_device *dev, pm_message_t s
 
 static int ohci_hcd_tmio_drv_resume(struct platform_device *dev)
 {
-	struct mfd_cell *cell = dev->dev.platform_data;
+	const struct mfd_cell *cell = mfd_get_cell(dev);
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 	struct tmio_hcd *tmio = hcd_to_tmio(hcd);
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 38193f4e980e..4a771f6cc822 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -2879,7 +2879,7 @@ static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 	/* Ok, we have more job to do! :) */
 
 	for (i = 0; i < num - 1; i++) {
-		/* Get free micro URB poll till a free urb is recieved */
+		/* Get free micro URB poll till a free urb is received */
 
 		do {
 			murb = (struct urb *) oxu_murb_alloc(oxu);
@@ -2911,7 +2911,7 @@ static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 
 	/* Last urb requires special handling  */
 
-	/* Get free micro URB poll till a free urb is recieved */
+	/* Get free micro URB poll till a free urb is received */
 	do {
 		murb = (struct urb *) oxu_murb_alloc(oxu);
 		if (!murb)
@@ -3832,7 +3832,7 @@ static int oxu_drv_probe(struct platform_device *pdev)
 		return -EBUSY;
 	}
 
-	ret = set_irq_type(irq, IRQF_TRIGGER_FALLING);
+	ret = irq_set_irq_type(irq, IRQF_TRIGGER_FALLING);
 	if (ret) {
 		dev_err(&pdev->dev, "error setting irq type\n");
 		ret = -EFAULT;
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 1d586d4f7b56..9b166d70ae91 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -84,65 +84,92 @@ int usb_amd_find_chipset_info(void)
 {
 	u8 rev = 0;
 	unsigned long flags;
+	struct amd_chipset_info info;
+	int ret;
 
 	spin_lock_irqsave(&amd_lock, flags);
 
-	amd_chipset.probe_count++;
 	/* probe only once */
-	if (amd_chipset.probe_count > 1) {
+	if (amd_chipset.probe_count > 0) {
+		amd_chipset.probe_count++;
 		spin_unlock_irqrestore(&amd_lock, flags);
 		return amd_chipset.probe_result;
 	}
+	memset(&info, 0, sizeof(info));
+	spin_unlock_irqrestore(&amd_lock, flags);
 
-	amd_chipset.smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
-	if (amd_chipset.smbus_dev) {
-		rev = amd_chipset.smbus_dev->revision;
+	info.smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
+	if (info.smbus_dev) {
+		rev = info.smbus_dev->revision;
 		if (rev >= 0x40)
-			amd_chipset.sb_type = 1;
+			info.sb_type = 1;
 		else if (rev >= 0x30 && rev <= 0x3b)
-			amd_chipset.sb_type = 3;
+			info.sb_type = 3;
 	} else {
-		amd_chipset.smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
-							0x780b, NULL);
-		if (!amd_chipset.smbus_dev) {
-			spin_unlock_irqrestore(&amd_lock, flags);
-			return 0;
+		info.smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+						0x780b, NULL);
+		if (!info.smbus_dev) {
+			ret = 0;
+			goto commit;
 		}
-		rev = amd_chipset.smbus_dev->revision;
+
+		rev = info.smbus_dev->revision;
 		if (rev >= 0x11 && rev <= 0x18)
-			amd_chipset.sb_type = 2;
+			info.sb_type = 2;
 	}
 
-	if (amd_chipset.sb_type == 0) {
-		if (amd_chipset.smbus_dev) {
-			pci_dev_put(amd_chipset.smbus_dev);
-			amd_chipset.smbus_dev = NULL;
+	if (info.sb_type == 0) {
+		if (info.smbus_dev) {
+			pci_dev_put(info.smbus_dev);
+			info.smbus_dev = NULL;
 		}
-		spin_unlock_irqrestore(&amd_lock, flags);
-		return 0;
+		ret = 0;
+		goto commit;
 	}
 
-	amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL);
-	if (amd_chipset.nb_dev) {
-		amd_chipset.nb_type = 1;
+	info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL);
+	if (info.nb_dev) {
+		info.nb_type = 1;
 	} else {
-		amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
-							0x1510, NULL);
-		if (amd_chipset.nb_dev) {
-			amd_chipset.nb_type = 2;
-		} else  {
-			amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
-								0x9600, NULL);
-			if (amd_chipset.nb_dev)
-				amd_chipset.nb_type = 3;
+		info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
+		if (info.nb_dev) {
+			info.nb_type = 2;
+		} else {
+			info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+						     0x9600, NULL);
+			if (info.nb_dev)
+				info.nb_type = 3;
 		}
 	}
 
-	amd_chipset.probe_result = 1;
+	ret = info.probe_result = 1;
 	printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n");
 
-	spin_unlock_irqrestore(&amd_lock, flags);
-	return amd_chipset.probe_result;
+commit:
+
+	spin_lock_irqsave(&amd_lock, flags);
+	if (amd_chipset.probe_count > 0) {
+		/* race - someone else was faster - drop devices */
+
+		/* Mark that we where here */
+		amd_chipset.probe_count++;
+		ret = amd_chipset.probe_result;
+
+		spin_unlock_irqrestore(&amd_lock, flags);
+
+		if (info.nb_dev)
+			pci_dev_put(info.nb_dev);
+		if (info.smbus_dev)
+			pci_dev_put(info.smbus_dev);
+
+	} else {
+		/* no race - commit the result */
+		info.probe_count++;
+		amd_chipset = info;
+		spin_unlock_irqrestore(&amd_lock, flags);
+	}
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info);
 
@@ -284,6 +311,7 @@ EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_enable);
 
 void usb_amd_dev_put(void)
 {
+	struct pci_dev *nb, *smbus;
 	unsigned long flags;
 
 	spin_lock_irqsave(&amd_lock, flags);
@@ -294,20 +322,23 @@ void usb_amd_dev_put(void)
 		return;
 	}
 
-	if (amd_chipset.nb_dev) {
-		pci_dev_put(amd_chipset.nb_dev);
-		amd_chipset.nb_dev = NULL;
-	}
-	if (amd_chipset.smbus_dev) {
-		pci_dev_put(amd_chipset.smbus_dev);
-		amd_chipset.smbus_dev = NULL;
-	}
+	/* save them to pci_dev_put outside of spinlock */
+	nb    = amd_chipset.nb_dev;
+	smbus = amd_chipset.smbus_dev;
+
+	amd_chipset.nb_dev = NULL;
+	amd_chipset.smbus_dev = NULL;
 	amd_chipset.nb_type = 0;
 	amd_chipset.sb_type = 0;
 	amd_chipset.isoc_reqs = 0;
 	amd_chipset.probe_result = 0;
 
 	spin_unlock_irqrestore(&amd_lock, flags);
+
+	if (nb)
+		pci_dev_put(nb);
+	if (smbus)
+		pci_dev_put(smbus);
 }
 EXPORT_SYMBOL_GPL(usb_amd_dev_put);
 
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index dc0ab8382f5d..d6e175428618 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -739,7 +739,7 @@ static int get_urb_status_from_qtd(struct urb *urb, u32 status)
  * process_inactive_qtd - process an inactive (but not halted) qTD.
  *
  * Update the urb with the transfer bytes from the qTD, if the urb is
- * completely transfered or (in the case of an IN only) the LPF is
+ * completely transferred or (in the case of an IN only) the LPF is
  * set, then the transfer is complete and the urb should be returned
  * to the system.
  */
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index a003e79aacdc..627f3438028c 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -846,7 +846,7 @@ static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
 		 * Skip ports that don't have known speeds, or have duplicate
 		 * Extended Capabilities port speed entries.
 		 */
-		if (port_speed == 0 || port_speed == -1)
+		if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
 			continue;
 
 		/*
@@ -974,6 +974,47 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	return 0;
 }
 
+/*
+ * Convert interval expressed as 2^(bInterval - 1) == interval into
+ * straight exponent value 2^n == interval.
+ *
+ */
+static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	unsigned int interval;
+
+	interval = clamp_val(ep->desc.bInterval, 1, 16) - 1;
+	if (interval != ep->desc.bInterval - 1)
+		dev_warn(&udev->dev,
+			 "ep %#x - rounding interval to %d microframes\n",
+			 ep->desc.bEndpointAddress,
+			 1 << interval);
+
+	return interval;
+}
+
+/*
+ * Convert bInterval expressed in frames (in 1-255 range) to exponent of
+ * microframes, rounded down to nearest power of 2.
+ */
+static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	unsigned int interval;
+
+	interval = fls(8 * ep->desc.bInterval) - 1;
+	interval = clamp_val(interval, 3, 10);
+	if ((1 << interval) != 8 * ep->desc.bInterval)
+		dev_warn(&udev->dev,
+			 "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
+			 ep->desc.bEndpointAddress,
+			 1 << interval,
+			 8 * ep->desc.bInterval);
+
+	return interval;
+}
+
 /* Return the polling or NAK interval.
  *
  * The polling interval is expressed in "microframes".  If xHCI's Interval field
@@ -982,7 +1023,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
  * The NAK interval is one NAK per 1 to 255 microframes, or no NAKs if interval
  * is set to 0.
  */
-static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
+static unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
 	unsigned int interval = 0;
@@ -991,45 +1032,38 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 	case USB_SPEED_HIGH:
 		/* Max NAK rate */
 		if (usb_endpoint_xfer_control(&ep->desc) ||
-				usb_endpoint_xfer_bulk(&ep->desc))
+		    usb_endpoint_xfer_bulk(&ep->desc)) {
 			interval = ep->desc.bInterval;
+			break;
+		}
 		/* Fall through - SS and HS isoc/int have same decoding */
+
 	case USB_SPEED_SUPER:
 		if (usb_endpoint_xfer_int(&ep->desc) ||
-				usb_endpoint_xfer_isoc(&ep->desc)) {
-			if (ep->desc.bInterval == 0)
-				interval = 0;
-			else
-				interval = ep->desc.bInterval - 1;
-			if (interval > 15)
-				interval = 15;
-			if (interval != ep->desc.bInterval + 1)
-				dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n",
-						ep->desc.bEndpointAddress, 1 << interval);
+		    usb_endpoint_xfer_isoc(&ep->desc)) {
+			interval = xhci_parse_exponent_interval(udev, ep);
 		}
 		break;
-	/* Convert bInterval (in 1-255 frames) to microframes and round down to
-	 * nearest power of 2.
-	 */
+
 	case USB_SPEED_FULL:
+		if (usb_endpoint_xfer_int(&ep->desc)) {
+			interval = xhci_parse_exponent_interval(udev, ep);
+			break;
+		}
+		/*
+		 * Fall through for isochronous endpoint interval decoding
+		 * since it uses the same rules as low speed interrupt
+		 * endpoints.
+		 */
+
 	case USB_SPEED_LOW:
 		if (usb_endpoint_xfer_int(&ep->desc) ||
-				usb_endpoint_xfer_isoc(&ep->desc)) {
-			interval = fls(8*ep->desc.bInterval) - 1;
-			if (interval > 10)
-				interval = 10;
-			if (interval < 3)
-				interval = 3;
-			if ((1 << interval) != 8*ep->desc.bInterval)
-				dev_warn(&udev->dev,
-						"ep %#x - rounding interval"
-						" to %d microframes, "
-						"ep desc says %d microframes\n",
-						ep->desc.bEndpointAddress,
-						1 << interval,
-						8*ep->desc.bInterval);
+		    usb_endpoint_xfer_isoc(&ep->desc)) {
+
+			interval = xhci_parse_frame_interval(udev, ep);
 		}
 		break;
+
 	default:
 		BUG();
 	}
@@ -1041,7 +1075,7 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
  * transaction opportunities per microframe", but that goes in the Max Burst
  * endpoint context field.
  */
-static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
+static u32 xhci_get_endpoint_mult(struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
 	if (udev->speed != USB_SPEED_SUPER ||
@@ -1050,7 +1084,7 @@ static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
 	return ep->ss_ep_comp.bmAttributes;
 }
 
-static inline u32 xhci_get_endpoint_type(struct usb_device *udev,
+static u32 xhci_get_endpoint_type(struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
 	int in;
@@ -1084,7 +1118,7 @@ static inline u32 xhci_get_endpoint_type(struct usb_device *udev,
  * Basically, this is the maxpacket size, multiplied by the burst size
  * and mult size.
  */
-static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
+static u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
 		struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
@@ -1727,12 +1761,12 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
 			 * found a similar duplicate.
 			 */
 			if (xhci->port_array[i] != major_revision &&
-				xhci->port_array[i] != (u8) -1) {
+				xhci->port_array[i] != DUPLICATE_ENTRY) {
 				if (xhci->port_array[i] == 0x03)
 					xhci->num_usb3_ports--;
 				else
 					xhci->num_usb2_ports--;
-				xhci->port_array[i] = (u8) -1;
+				xhci->port_array[i] = DUPLICATE_ENTRY;
 			}
 			/* FIXME: Should we disable the port? */
 			continue;
@@ -1831,7 +1865,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 		for (i = 0; i < num_ports; i++) {
 			if (xhci->port_array[i] == 0x03 ||
 					xhci->port_array[i] == 0 ||
-					xhci->port_array[i] == -1)
+					xhci->port_array[i] == DUPLICATE_ENTRY)
 				continue;
 
 			xhci->usb2_ports[port_index] =
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index ceea9f33491c..a10494c2f3c7 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -114,6 +114,10 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 	if (pdev->vendor == PCI_VENDOR_ID_NEC)
 		xhci->quirks |= XHCI_NEC_HOST;
 
+	/* AMD PLL quirk */
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
+		xhci->quirks |= XHCI_AMD_PLL_FIX;
+
 	/* Make sure the HC is halted. */
 	retval = xhci_halt(xhci);
 	if (retval)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index cfc1ad92473f..7437386a9a50 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -93,7 +93,7 @@ dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
 /* Does this link TRB point to the first segment in a ring,
  * or was the previous TRB the last TRB on the last segment in the ERST?
  */
-static inline bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring,
+static bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring,
 		struct xhci_segment *seg, union xhci_trb *trb)
 {
 	if (ring == xhci->event_ring)
@@ -107,7 +107,7 @@ static inline bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring
  * segment?  I.e. would the updated event TRB pointer step off the end of the
  * event seg?
  */
-static inline int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
+static int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
 		struct xhci_segment *seg, union xhci_trb *trb)
 {
 	if (ring == xhci->event_ring)
@@ -116,7 +116,7 @@ static inline int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
 		return (trb->link.control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK);
 }
 
-static inline int enqueue_is_link_trb(struct xhci_ring *ring)
+static int enqueue_is_link_trb(struct xhci_ring *ring)
 {
 	struct xhci_link_trb *link = &ring->enqueue->link;
 	return ((link->control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK));
@@ -592,7 +592,7 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
 	ep->ep_state |= SET_DEQ_PENDING;
 }
 
-static inline void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci,
+static void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci,
 		struct xhci_virt_ep *ep)
 {
 	ep->ep_state &= ~EP_HALT_PENDING;
@@ -619,6 +619,13 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
 
 	/* Only giveback urb when this is the last td in urb */
 	if (urb_priv->td_cnt == urb_priv->length) {
+		if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+			xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
+			if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs	== 0) {
+				if (xhci->quirks & XHCI_AMD_PLL_FIX)
+					usb_amd_quirk_pll_enable();
+			}
+		}
 		usb_hcd_unlink_urb_from_ep(hcd, urb);
 		xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, urb);
 
@@ -1209,7 +1216,7 @@ static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
 		 * Skip ports that don't have known speeds, or have duplicate
 		 * Extended Capabilities port speed entries.
 		 */
-		if (port_speed == 0 || port_speed == -1)
+		if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
 			continue;
 
 		/*
@@ -1235,6 +1242,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 	u8 major_revision;
 	struct xhci_bus_state *bus_state;
 	u32 __iomem **port_array;
+	bool bogus_port_status = false;
 
 	/* Port status change events always have a successful completion code */
 	if (GET_COMP_CODE(event->generic.field[2]) != COMP_SUCCESS) {
@@ -1247,6 +1255,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 	max_ports = HCS_MAX_PORTS(xhci->hcs_params1);
 	if ((port_id <= 0) || (port_id > max_ports)) {
 		xhci_warn(xhci, "Invalid port id %d\n", port_id);
+		bogus_port_status = true;
 		goto cleanup;
 	}
 
@@ -1258,12 +1267,14 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		xhci_warn(xhci, "Event for port %u not in "
 				"Extended Capabilities, ignoring.\n",
 				port_id);
+		bogus_port_status = true;
 		goto cleanup;
 	}
-	if (major_revision == (u8) -1) {
+	if (major_revision == DUPLICATE_ENTRY) {
 		xhci_warn(xhci, "Event for port %u duplicated in"
 				"Extended Capabilities, ignoring.\n",
 				port_id);
+		bogus_port_status = true;
 		goto cleanup;
 	}
 
@@ -1335,6 +1346,13 @@ cleanup:
 	/* Update event ring dequeue pointer before dropping the lock */
 	inc_deq(xhci, xhci->event_ring, true);
 
+	/* Don't make the USB core poll the roothub if we got a bad port status
+	 * change event.  Besides, at that point we can't tell which roothub
+	 * (USB 2.0 or USB 3.0) to kick.
+	 */
+	if (bogus_port_status)
+		return;
+
 	spin_unlock(&xhci->lock);
 	/* Pass this up to the core */
 	usb_hcd_poll_rh_status(hcd);
@@ -1554,8 +1572,17 @@ td_cleanup:
 
 		urb_priv->td_cnt++;
 		/* Giveback the urb when all the tds are completed */
-		if (urb_priv->td_cnt == urb_priv->length)
+		if (urb_priv->td_cnt == urb_priv->length) {
 			ret = 1;
+			if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+				xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
+				if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs
+					== 0) {
+					if (xhci->quirks & XHCI_AMD_PLL_FIX)
+						usb_amd_quirk_pll_enable();
+				}
+			}
+		}
 	}
 
 	return ret;
@@ -1675,71 +1702,52 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	struct urb_priv *urb_priv;
 	int idx;
 	int len = 0;
-	int skip_td = 0;
 	union xhci_trb *cur_trb;
 	struct xhci_segment *cur_seg;
+	struct usb_iso_packet_descriptor *frame;
 	u32 trb_comp_code;
+	bool skip_td = false;
 
 	ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
 	trb_comp_code = GET_COMP_CODE(event->transfer_len);
 	urb_priv = td->urb->hcpriv;
 	idx = urb_priv->td_cnt;
+	frame = &td->urb->iso_frame_desc[idx];
 
-	if (ep->skip) {
-		/* The transfer is partly done */
-		*status = -EXDEV;
-		td->urb->iso_frame_desc[idx].status = -EXDEV;
-	} else {
-		/* handle completion code */
-		switch (trb_comp_code) {
-		case COMP_SUCCESS:
-			td->urb->iso_frame_desc[idx].status = 0;
-			xhci_dbg(xhci, "Successful isoc transfer!\n");
-			break;
-		case COMP_SHORT_TX:
-			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
-				td->urb->iso_frame_desc[idx].status =
-					 -EREMOTEIO;
-			else
-				td->urb->iso_frame_desc[idx].status = 0;
-			break;
-		case COMP_BW_OVER:
-			td->urb->iso_frame_desc[idx].status = -ECOMM;
-			skip_td = 1;
-			break;
-		case COMP_BUFF_OVER:
-		case COMP_BABBLE:
-			td->urb->iso_frame_desc[idx].status = -EOVERFLOW;
-			skip_td = 1;
-			break;
-		case COMP_STALL:
-			td->urb->iso_frame_desc[idx].status = -EPROTO;
-			skip_td = 1;
-			break;
-		case COMP_STOP:
-		case COMP_STOP_INVAL:
-			break;
-		default:
-			td->urb->iso_frame_desc[idx].status = -1;
-			break;
-		}
-	}
-
-	/* calc actual length */
-	if (ep->skip) {
-		td->urb->iso_frame_desc[idx].actual_length = 0;
-		/* Update ring dequeue pointer */
-		while (ep_ring->dequeue != td->last_trb)
-			inc_deq(xhci, ep_ring, false);
-		inc_deq(xhci, ep_ring, false);
-		return finish_td(xhci, td, event_trb, event, ep, status, true);
+	/* handle completion code */
+	switch (trb_comp_code) {
+	case COMP_SUCCESS:
+		frame->status = 0;
+		xhci_dbg(xhci, "Successful isoc transfer!\n");
+		break;
+	case COMP_SHORT_TX:
+		frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ?
+				-EREMOTEIO : 0;
+		break;
+	case COMP_BW_OVER:
+		frame->status = -ECOMM;
+		skip_td = true;
+		break;
+	case COMP_BUFF_OVER:
+	case COMP_BABBLE:
+		frame->status = -EOVERFLOW;
+		skip_td = true;
+		break;
+	case COMP_STALL:
+		frame->status = -EPROTO;
+		skip_td = true;
+		break;
+	case COMP_STOP:
+	case COMP_STOP_INVAL:
+		break;
+	default:
+		frame->status = -1;
+		break;
 	}
 
-	if (trb_comp_code == COMP_SUCCESS || skip_td == 1) {
-		td->urb->iso_frame_desc[idx].actual_length =
-			td->urb->iso_frame_desc[idx].length;
-		td->urb->actual_length +=
-			td->urb->iso_frame_desc[idx].length;
+	if (trb_comp_code == COMP_SUCCESS || skip_td) {
+		frame->actual_length = frame->length;
+		td->urb->actual_length += frame->length;
 	} else {
 		for (cur_trb = ep_ring->dequeue,
 		     cur_seg = ep_ring->deq_seg; cur_trb != event_trb;
@@ -1755,7 +1763,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 			TRB_LEN(event->transfer_len);
 
 		if (trb_comp_code != COMP_STOP_INVAL) {
-			td->urb->iso_frame_desc[idx].actual_length = len;
+			frame->actual_length = len;
 			td->urb->actual_length += len;
 		}
 	}
@@ -1766,6 +1774,35 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	return finish_td(xhci, td, event_trb, event, ep, status, false);
 }
 
+static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
+			struct xhci_transfer_event *event,
+			struct xhci_virt_ep *ep, int *status)
+{
+	struct xhci_ring *ep_ring;
+	struct urb_priv *urb_priv;
+	struct usb_iso_packet_descriptor *frame;
+	int idx;
+
+	ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+	urb_priv = td->urb->hcpriv;
+	idx = urb_priv->td_cnt;
+	frame = &td->urb->iso_frame_desc[idx];
+
+	/* The transfer is partly done */
+	*status = -EXDEV;
+	frame->status = -EXDEV;
+
+	/* calc actual length */
+	frame->actual_length = 0;
+
+	/* Update ring dequeue pointer */
+	while (ep_ring->dequeue != td->last_trb)
+		inc_deq(xhci, ep_ring, false);
+	inc_deq(xhci, ep_ring, false);
+
+	return finish_td(xhci, td, NULL, event, ep, status, true);
+}
+
 /*
  * Process bulk and interrupt tds, update urb status and actual_length.
  */
@@ -2024,36 +2061,42 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		}
 
 		td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
+
 		/* Is this a TRB in the currently executing TD? */
 		event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
 				td->last_trb, event_dma);
-		if (event_seg && ep->skip) {
+		if (!event_seg) {
+			if (!ep->skip ||
+			    !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) {
+				/* HC is busted, give up! */
+				xhci_err(xhci,
+					"ERROR Transfer event TRB DMA ptr not "
+					"part of current TD\n");
+				return -ESHUTDOWN;
+			}
+
+			ret = skip_isoc_td(xhci, td, event, ep, &status);
+			goto cleanup;
+		}
+
+		if (ep->skip) {
 			xhci_dbg(xhci, "Found td. Clear skip flag.\n");
 			ep->skip = false;
 		}
-		if (!event_seg &&
-		   (!ep->skip || !usb_endpoint_xfer_isoc(&td->urb->ep->desc))) {
-			/* HC is busted, give up! */
-			xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not "
-					"part of current TD\n");
-			return -ESHUTDOWN;
-		}
 
-		if (event_seg) {
-			event_trb = &event_seg->trbs[(event_dma -
-					 event_seg->dma) / sizeof(*event_trb)];
-			/*
-			 * No-op TRB should not trigger interrupts.
-			 * If event_trb is a no-op TRB, it means the
-			 * corresponding TD has been cancelled. Just ignore
-			 * the TD.
-			 */
-			if ((event_trb->generic.field[3] & TRB_TYPE_BITMASK)
-					 == TRB_TYPE(TRB_TR_NOOP)) {
-				xhci_dbg(xhci, "event_trb is a no-op TRB. "
-						"Skip it\n");
-				goto cleanup;
-			}
+		event_trb = &event_seg->trbs[(event_dma - event_seg->dma) /
+						sizeof(*event_trb)];
+		/*
+		 * No-op TRB should not trigger interrupts.
+		 * If event_trb is a no-op TRB, it means the
+		 * corresponding TD has been cancelled. Just ignore
+		 * the TD.
+		 */
+		if ((event_trb->generic.field[3] & TRB_TYPE_BITMASK)
+				 == TRB_TYPE(TRB_TR_NOOP)) {
+			xhci_dbg(xhci,
+				 "event_trb is a no-op TRB. Skip it\n");
+			goto cleanup;
 		}
 
 		/* Now update the urb's actual_length and give back to
@@ -3126,6 +3169,12 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		}
 	}
 
+	if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
+		if (xhci->quirks & XHCI_AMD_PLL_FIX)
+			usb_amd_quirk_pll_disable();
+	}
+	xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs++;
+
 	giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
 			start_cycle, start_trb);
 	return 0;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 9a3645fd759b..81b976e45880 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -550,6 +550,9 @@ void xhci_stop(struct usb_hcd *hcd)
 	del_timer_sync(&xhci->event_ring_timer);
 #endif
 
+	if (xhci->quirks & XHCI_AMD_PLL_FIX)
+		usb_amd_dev_put();
+
 	xhci_dbg(xhci, "// Disabling event ring interrupts\n");
 	temp = xhci_readl(xhci, &xhci->op_regs->status);
 	xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
@@ -741,7 +744,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	int			retval;
 
 	/* Wait a bit if either of the roothubs need to settle from the
-	 * transistion into bus suspend.
+	 * transition into bus suspend.
 	 */
 	if (time_before(jiffies, xhci->bus_state[0].next_statechange) ||
 			time_before(jiffies,
@@ -771,7 +774,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 
 	/* If restore operation fails, re-initialize the HC during resume */
 	if ((temp & STS_SRE) || hibernated) {
-		usb_root_hub_lost_power(hcd->self.root_hub);
+		/* Let the USB core know _both_ roothubs lost power. */
+		usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
+		usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
 
 		xhci_dbg(xhci, "Stop HCD\n");
 		xhci_halt(xhci);
@@ -2072,7 +2077,7 @@ int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
 		return -EINVAL;
 	}
 	vdev = xhci->devs[udev->slot_id];
-	/* Mark each endpoint as being in transistion, so
+	/* Mark each endpoint as being in transition, so
 	 * xhci_urb_enqueue() will reject all URBs.
 	 */
 	for (i = 0; i < num_eps; i++) {
@@ -2386,10 +2391,18 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 	/* Everything but endpoint 0 is disabled, so free or cache the rings. */
 	last_freed_endpoint = 1;
 	for (i = 1; i < 31; ++i) {
-		if (!virt_dev->eps[i].ring)
-			continue;
-		xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
-		last_freed_endpoint = i;
+		struct xhci_virt_ep *ep = &virt_dev->eps[i];
+
+		if (ep->ep_state & EP_HAS_STREAMS) {
+			xhci_free_stream_info(xhci, ep->stream_info);
+			ep->stream_info = NULL;
+			ep->ep_state &= ~EP_HAS_STREAMS;
+		}
+
+		if (ep->ring) {
+			xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
+			last_freed_endpoint = i;
+		}
 	}
 	xhci_dbg(xhci, "Output context after successful reset device cmd:\n");
 	xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 711de253bc0f..ba1be6b7cc6d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -30,6 +30,7 @@
 
 /* Code sharing between pci-quirks and xhci hcd */
 #include	"xhci-ext-caps.h"
+#include "pci-quirks.h"
 
 /* xHCI PCI Configuration Registers */
 #define XHCI_SBRN_OFFSET	(0x60)
@@ -232,7 +233,7 @@ struct xhci_op_regs {
  * notification type that matches a bit set in this bit field.
  */
 #define	DEV_NOTE_MASK		(0xffff)
-#define ENABLE_DEV_NOTE(x)	(1 << x)
+#define ENABLE_DEV_NOTE(x)	(1 << (x))
 /* Most of the device notification types should only be used for debug.
  * SW does need to pay attention to function wake notifications.
  */
@@ -348,6 +349,9 @@ struct xhci_op_regs {
 /* Initiate a warm port reset - complete when PORT_WRC is '1' */
 #define PORT_WR		(1 << 31)
 
+/* We mark duplicate entries with -1 */
+#define DUPLICATE_ENTRY ((u8)(-1))
+
 /* Port Power Management Status and Control - port_power_base bitmasks */
 /* Inactivity timer value for transitions into U1, in microseconds.
  * Timeout can be up to 127us.  0xFF means an infinite timeout.
@@ -601,11 +605,11 @@ struct xhci_ep_ctx {
 #define EP_STATE_STOPPED	3
 #define EP_STATE_ERROR		4
 /* Mult - Max number of burtst within an interval, in EP companion desc. */
-#define EP_MULT(p)		((p & 0x3) << 8)
+#define EP_MULT(p)		(((p) & 0x3) << 8)
 /* bits 10:14 are Max Primary Streams */
 /* bit 15 is Linear Stream Array */
 /* Interval - period between requests to an endpoint - 125u increments. */
-#define EP_INTERVAL(p)		((p & 0xff) << 16)
+#define EP_INTERVAL(p)		(((p) & 0xff) << 16)
 #define EP_INTERVAL_TO_UFRAMES(p)		(1 << (((p) >> 16) & 0xff))
 #define EP_MAXPSTREAMS_MASK	(0x1f << 10)
 #define EP_MAXPSTREAMS(p)	(((p) << 10) & EP_MAXPSTREAMS_MASK)
@@ -873,7 +877,7 @@ struct xhci_transfer_event {
 #define COMP_CMD_ABORT	25
 /* Stopped - transfer was terminated by a stop endpoint command */
 #define COMP_STOP	26
-/* Same as COMP_EP_STOPPED, but the transfered length in the event is invalid */
+/* Same as COMP_EP_STOPPED, but the transferred length in the event is invalid */
 #define COMP_STOP_INVAL	27
 /* Control Abort Error - Debug Capability - control pipe aborted */
 #define COMP_DBG_ABORT	28
@@ -1276,6 +1280,7 @@ struct xhci_hcd {
 #define	XHCI_LINK_TRB_QUIRK	(1 << 0)
 #define XHCI_RESET_EP_QUIRK	(1 << 1)
 #define XHCI_NEC_HOST		(1 << 2)
+#define XHCI_AMD_PLL_FIX	(1 << 3)
 	/* There are two roothubs to keep track of bus suspend info for */
 	struct xhci_bus_state   bus_state[2];
 	/* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index c90c89dc0003..a0037961e5bd 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -69,7 +69,7 @@
  *	20000513 added IDs for all products supported by Windows driver (john)
  *	20000514 Rewrote mts_scsi_queuecommand to use URBs (john)
  *	20000514 Version 0.0.8j
- *      20000514 Fix reporting of non-existant devices to SCSI layer (john)
+ *      20000514 Fix reporting of non-existent devices to SCSI layer (john)
  *	20000514 Added MTS_DEBUG_INT (john)
  *	20000514 Changed "usb-microtek" to "microtek" for consistency (john)
  *	20000514 Stupid bug fixes (john)
@@ -557,14 +557,14 @@ mts_build_transfer_context(struct scsi_cmnd *srb, struct mts_desc* desc)
 
 	if ( !memcmp( srb->cmnd, mts_read_image_sig, mts_read_image_sig_len )
 ) { 		pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_image);
-		MTS_DEBUG( "transfering from desc->ep_image == %d\n",
+		MTS_DEBUG( "transferring from desc->ep_image == %d\n",
 			   (int)desc->ep_image );
 	} else if ( MTS_DIRECTION_IS_IN(srb->cmnd[0]) ) {
 			pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_response);
-			MTS_DEBUG( "transfering from desc->ep_response == %d\n",
+			MTS_DEBUG( "transferring from desc->ep_response == %d\n",
 				   (int)desc->ep_response);
 	} else {
-		MTS_DEBUG("transfering to desc->ep_out == %d\n",
+		MTS_DEBUG("transferring to desc->ep_out == %d\n",
 			  (int)desc->ep_out);
 		pipe = usb_sndbulkpipe(desc->usb_dev,desc->ep_out);
 	}
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index 1fa6ce3e4a23..68ab460a735c 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -282,6 +282,7 @@ static int appledisplay_probe(struct usb_interface *iface,
 	snprintf(bl_name, sizeof(bl_name), "appledisplay%d",
 		atomic_inc_return(&count_displays) - 1);
 	memset(&props, 0, sizeof(struct backlight_properties));
+	props.type = BACKLIGHT_RAW;
 	props.max_brightness = 0xff;
 	pdata->bd = backlight_device_register(bl_name, NULL, pdata,
 					      &appledisplay_bl_data, &props);
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index e573e4704015..a2190b983f52 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -40,7 +40,7 @@
 #ifdef CONFIG_USB_DYNAMIC_MINORS
 #define IOWARRIOR_MINOR_BASE	0
 #else
-#define IOWARRIOR_MINOR_BASE	208	// SKELETON_MINOR_BASE 192 + 16, not offical yet
+#define IOWARRIOR_MINOR_BASE	208	// SKELETON_MINOR_BASE 192 + 16, not official yet
 #endif
 
 /* interrupt input queue size */
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index f7a205738032..8b1d94a76914 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -177,12 +177,11 @@ static struct uss720_async_request *submit_async_request(struct parport_uss720_p
 	spin_lock_irqsave(&priv->asynclock, flags);
 	list_add_tail(&rq->asynclist, &priv->asynclist);
 	spin_unlock_irqrestore(&priv->asynclock, flags);
+	kref_get(&rq->ref_count);
 	ret = usb_submit_urb(rq->urb, mem_flags);
-	if (!ret) {
-		kref_get(&rq->ref_count);
+	if (!ret)
 		return rq;
-	}
-	kref_put(&rq->ref_count, destroy_async);
+	destroy_async(&rq->ref_count);
 	err("submit_async_request submit_urb failed with %d", ret);
 	return NULL;
 }
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 4cbb7e4b368d..74073b363c30 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -14,7 +14,7 @@ config USB_MUSB_HDRC
 	select TWL4030_USB if MACH_OMAP_3430SDP
 	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 	select USB_OTG_UTILS
-	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
+	bool 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	help
 	  Say Y here if your system has a dual role high speed USB
 	  controller based on the Mentor Graphics silicon IP.  Then
@@ -30,8 +30,8 @@ config USB_MUSB_HDRC
 
 	  If you do not know what this is, please say N.
 
-	  To compile this driver as a module, choose M here; the
-	  module will be called "musb-hdrc".
+#	  To compile this driver as a module, choose M here; the
+#	  module will be called "musb-hdrc".
 
 choice
 	prompt "Platform Glue Layer"
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 9d49d1cd7ce2..8e2a1ff8a35a 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -21,6 +21,7 @@
 #include <asm/cacheflush.h>
 
 #include "musb_core.h"
+#include "musbhsdma.h"
 #include "blackfin.h"
 
 struct bfin_glue {
@@ -322,7 +323,7 @@ static void bfin_musb_try_idle(struct musb *musb, unsigned long timeout)
 		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
 }
 
-static int bfin_musb_get_vbus_status(struct musb *musb)
+static int bfin_musb_vbus_status(struct musb *musb)
 {
 	return 0;
 }
@@ -332,6 +333,27 @@ static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode)
 	return -EIO;
 }
 
+static int bfin_musb_adjust_channel_params(struct dma_channel *channel,
+				u16 packet_sz, u8 *mode,
+				dma_addr_t *dma_addr, u32 *len)
+{
+	struct musb_dma_channel *musb_channel = channel->private_data;
+
+	/*
+	 * Anomaly 05000450 might cause data corruption when using DMA
+	 * MODE 1 transmits with short packet.  So to work around this,
+	 * we truncate all MODE 1 transfers down to a multiple of the
+	 * max packet size, and then do the last short packet transfer
+	 * (if there is any) using MODE 0.
+	 */
+	if (ANOMALY_05000450) {
+		if (musb_channel->transmit && *mode == 1)
+			*len = *len - (*len % packet_sz);
+	}
+
+	return 0;
+}
+
 static void bfin_musb_reg_init(struct musb *musb)
 {
 	if (ANOMALY_05000346) {
@@ -430,6 +452,8 @@ static const struct musb_platform_ops bfin_ops = {
 
 	.vbus_status	= bfin_musb_vbus_status,
 	.set_vbus	= bfin_musb_set_vbus,
+
+	.adjust_channel_params = bfin_musb_adjust_channel_params,
 };
 
 static u64 bfin_dmamask = DMA_BIT_MASK(32);
@@ -540,7 +564,7 @@ static struct dev_pm_ops bfin_pm_ops = {
 	.resume		= bfin_resume,
 };
 
-#define DEV_PM_OPS	&bfin_pm_op,
+#define DEV_PM_OPS	&bfin_pm_ops
 #else
 #define DEV_PM_OPS	NULL
 #endif
@@ -548,7 +572,7 @@ static struct dev_pm_ops bfin_pm_ops = {
 static struct platform_driver bfin_driver = {
 	.remove		= __exit_p(bfin_remove),
 	.driver		= {
-		.name	= "musb-bfin",
+		.name	= "musb-blackfin",
 		.pm	= DEV_PM_OPS,
 	},
 };
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index de55a3c3259a..ab434fbd8c35 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -597,12 +597,12 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx)
 		length = min(n_bds * maxpacket, length);
 	}
 
-	DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%x len %u\n",
+	DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%llx len %u\n",
 			tx->index,
 			maxpacket,
 			rndis ? "rndis" : "transparent",
 			n_bds,
-			addr, length);
+			(unsigned long long)addr, length);
 
 	cppi_rndis_update(tx, 0, musb->ctrl_base, rndis);
 
@@ -820,7 +820,7 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
 	length = min(n_bds * maxpacket, length);
 
 	DBG(4, "RX DMA%d seg, maxp %d %s bds %d (cnt %d) "
-			"dma 0x%x len %u %u/%u\n",
+			"dma 0x%llx len %u %u/%u\n",
 			rx->index, maxpacket,
 			onepacket
 				? (is_rndis ? "rndis" : "onepacket")
@@ -829,7 +829,8 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
 			musb_readl(tibase,
 				DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
 					& 0xffff,
-			addr, length, rx->channel.actual_len, rx->buf_len);
+			(unsigned long long)addr, length,
+			rx->channel.actual_len, rx->buf_len);
 
 	/* only queue one segment at a time, since the hardware prevents
 	 * correct queue shutdown after unexpected short packets
@@ -1039,9 +1040,9 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
 		if (!completed && (bd->hw_options & CPPI_OWN_SET))
 			break;
 
-		DBG(5, "C/RXBD %08x: nxt %08x buf %08x "
+		DBG(5, "C/RXBD %llx: nxt %08x buf %08x "
 			"off.len %08x opt.len %08x (%d)\n",
-			bd->dma, bd->hw_next, bd->hw_bufp,
+			(unsigned long long)bd->dma, bd->hw_next, bd->hw_bufp,
 			bd->hw_off_len, bd->hw_options,
 			rx->channel.actual_len);
 
@@ -1111,11 +1112,12 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
 		musb_ep_select(cppi->mregs, rx->index + 1);
 		csr = musb_readw(regs, MUSB_RXCSR);
 		if (csr & MUSB_RXCSR_DMAENAB) {
-			DBG(4, "list%d %p/%p, last %08x%s, csr %04x\n",
+			DBG(4, "list%d %p/%p, last %llx%s, csr %04x\n",
 				rx->index,
 				rx->head, rx->tail,
 				rx->last_processed
-					? rx->last_processed->dma
+					? (unsigned long long)
+						rx->last_processed->dma
 					: 0,
 				completed ? ", completed" : "",
 				csr);
@@ -1167,8 +1169,11 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id)
 	tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
 	rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
 
-	if (!tx && !rx)
+	if (!tx && !rx) {
+		if (cppi->irq)
+			spin_unlock_irqrestore(&musb->lock, flags);
 		return IRQ_NONE;
+	}
 
 	DBG(4, "CPPI IRQ Tx%x Rx%x\n", tx, rx);
 
@@ -1199,7 +1204,7 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id)
 		 */
 		if (NULL == bd) {
 			DBG(1, "null BD\n");
-			tx_ram->tx_complete = 0;
+			musb_writel(&tx_ram->tx_complete, 0, 0);
 			continue;
 		}
 
@@ -1452,7 +1457,7 @@ static int cppi_channel_abort(struct dma_channel *channel)
 		 *    compare mode by writing 1 to the tx_complete register.
 		 */
 		cppi_reset_tx(tx_ram, 1);
-		cppi_ch->head = 0;
+		cppi_ch->head = NULL;
 		musb_writel(&tx_ram->tx_complete, 0, 1);
 		cppi_dump_tx(5, cppi_ch, " (done teardown)");
 
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 630ae7f3cd4c..f10ff00ca09e 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1030,6 +1030,7 @@ static void musb_shutdown(struct platform_device *pdev)
 	struct musb	*musb = dev_to_musb(&pdev->dev);
 	unsigned long	flags;
 
+	pm_runtime_get_sync(musb->controller);
 	spin_lock_irqsave(&musb->lock, flags);
 	musb_platform_disable(musb);
 	musb_generic_disable(musb);
@@ -1040,6 +1041,7 @@ static void musb_shutdown(struct platform_device *pdev)
 	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 	musb_platform_exit(musb);
 
+	pm_runtime_put(musb->controller);
 	/* FIXME power down */
 }
 
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 4bd9e2145ee4..0e053b587960 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -261,6 +261,7 @@ enum musb_g_ep0_state {
  * @try_ilde:	tries to idle the IP
  * @vbus_status: returns vbus status if possible
  * @set_vbus:	forces vbus status
+ * @channel_program: pre check for standard dma channel_program func
  */
 struct musb_platform_ops {
 	int	(*init)(struct musb *musb);
@@ -274,6 +275,10 @@ struct musb_platform_ops {
 
 	int	(*vbus_status)(struct musb *musb);
 	void	(*set_vbus)(struct musb *musb, int on);
+
+	int	(*adjust_channel_params)(struct dma_channel *channel,
+				u16 packet_sz, u8 *mode,
+				dma_addr_t *dma_addr, u32 *len);
 };
 
 /*
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 5c7b321d3959..6dfbf9ffd7a6 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -535,7 +535,7 @@ void musb_g_tx(struct musb *musb, u8 epnum)
 			is_dma = 1;
 			csr |= MUSB_TXCSR_P_WZC_BITS;
 			csr &= ~(MUSB_TXCSR_DMAENAB | MUSB_TXCSR_P_UNDERRUN |
-				 MUSB_TXCSR_TXPKTRDY);
+				 MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_AUTOSET);
 			musb_writew(epio, MUSB_TXCSR, csr);
 			/* Ensure writebuffer is empty. */
 			csr = musb_readw(epio, MUSB_TXCSR);
@@ -1296,7 +1296,7 @@ static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
 	}
 
 	/* if the hardware doesn't have the request, easy ... */
-	if (musb_ep->req_list.next != &request->list || musb_ep->busy)
+	if (musb_ep->req_list.next != &req->list || musb_ep->busy)
 		musb_g_giveback(musb_ep, request, -ECONNRESET);
 
 	/* ... else abort the dma transfer ... */
@@ -1880,12 +1880,12 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 		if (retval < 0) {
 			DBG(1, "add_hcd failed, %d\n", retval);
 			goto err2;
-
-			if ((musb->xceiv->last_event == USB_EVENT_ID)
-						&& musb->xceiv->set_vbus)
-				otg_set_vbus(musb->xceiv, 1);
 		}
 
+		if ((musb->xceiv->last_event == USB_EVENT_ID)
+					&& musb->xceiv->set_vbus)
+			otg_set_vbus(musb->xceiv, 1);
+
 		hcd->self.uses_pio_for_control = 1;
 
 		if (musb->xceiv->last_event == USB_EVENT_NONE)
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 0144a2d481fd..d281792db05c 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -169,6 +169,14 @@ static int dma_channel_program(struct dma_channel *channel,
 	BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
 		channel->status == MUSB_DMA_STATUS_BUSY);
 
+	/* Let targets check/tweak the arguments */
+	if (musb->ops->adjust_channel_params) {
+		int ret = musb->ops->adjust_channel_params(channel,
+			packet_sz, &mode, &dma_addr, &len);
+		if (ret)
+			return ret;
+	}
+
 	/*
 	 * The DMA engine in RTL1.8 and above cannot handle
 	 * DMA addresses that are not aligned to a 4 byte boundary.
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 25cb8b0003b1..57a27fa954b4 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -259,9 +259,10 @@ static int musb_otg_notifications(struct notifier_block *nb,
 	case USB_EVENT_VBUS:
 		DBG(4, "VBUS Connect\n");
 
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 		if (musb->gadget_driver)
 			pm_runtime_get_sync(musb->controller);
-
+#endif
 		otg_init(musb->xceiv);
 		break;
 
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 2ba3b070ed0b..c47aac4a1f98 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -943,7 +943,7 @@ static void tusb_musb_enable(struct musb *musb)
 	musb_writel(tbase, TUSB_INT_CTRL_CONF,
 			TUSB_INT_CTRL_CONF_INT_RELCYC(0));
 
-	set_irq_type(musb->nIrq, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(musb->nIrq, IRQ_TYPE_LEVEL_LOW);
 
 	/* maybe force into the Default-A OTG state machine */
 	if (!(musb_readl(tbase, TUSB_DEV_OTG_STAT)
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index d6384e4aeef9..f7e04bf34a13 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -93,6 +93,8 @@ static int __init ux500_probe(struct platform_device *pdev)
 	}
 
 	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= pdev->dev.dma_mask;
+	musb->dev.coherent_dma_mask	= pdev->dev.coherent_dma_mask;
 
 	glue->dev			= &pdev->dev;
 	glue->musb			= musb;
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 8c6fdef61d1c..e25700f44b6f 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -1531,7 +1531,7 @@ isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	i2c_set_clientdata(i2c, isp);
 	isp->client = i2c;
 
-	/* verify the chip (shouldn't be necesary) */
+	/* verify the chip (shouldn't be necessary) */
 	status = isp1301_get_u16(isp, ISP1301_VENDOR_ID);
 	if (status != I2C_VENDOR_ID_PHILIPS) {
 		dev_dbg(&i2c->dev, "not philips id: %d\n", status);
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
index 7f9b8cd4514b..e973ff19c55a 100644
--- a/drivers/usb/otg/langwell_otg.c
+++ b/drivers/usb/otg/langwell_otg.c
@@ -580,7 +580,7 @@ static void langwell_otg_add_ktimer(enum langwell_otg_timer_type timers)
 		time = TB_BUS_SUSPEND;
 		break;
 	default:
-		dev_dbg(lnw->dev, "unkown timer, cannot enable it\n");
+		dev_dbg(lnw->dev, "unknown timer, cannot enable it\n");
 		return;
 	}
 
@@ -1381,7 +1381,7 @@ static void langwell_otg_work(struct work_struct *work)
 			} else if (!iotg->hsm.a_bus_req && iotg->otg.host &&
 					iotg->otg.host->b_hnp_enable) {
 				/* It is not safe enough to do a fast
-				 * transistion from A_WAIT_BCON to
+				 * transition from A_WAIT_BCON to
 				 * A_SUSPEND */
 				msleep(10000);
 				if (iotg->hsm.a_bus_req)
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 0db6ace16f7b..aba201cb872c 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -16,7 +16,7 @@
  * When reading the process is almost equal except that the header starts with
  * 0x00 0x20.
  *
- * The device simply need some stuff to understand data comming from the usb
+ * The device simply need some stuff to understand data coming from the usb
  * buffer: The First and Second byte is used for a Header, the Third and Fourth
  * tells the  device the amount of information the package holds.
  * Packages are 60 bytes long Header Stuff.
@@ -30,7 +30,7 @@
  * one.
  *
  * The driver registers himself with the USB-serial core and the USB Core. I had
- * to implement a probe function agains USB-serial, because other way, the
+ * to implement a probe function against USB-serial, because other way, the
  * driver was attaching himself to both interfaces. I have tryed with different
  * configurations of usb_serial_driver with out exit, only the probe function
  * could handle this correctly.
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 4df3e0cecbae..0f11afdda134 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -101,7 +101,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
 	{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
-	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
+	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
 	{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesys ETRX2USB */
 	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 987e9bf7bd02..d9906eb9d16a 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -35,7 +35,7 @@
  *
  *  Lonnie Mendez <dignome@gmail.com>
  *  04-10-2004
- *	Driver modified to support dynamic line settings.  Various improvments
+ *	Driver modified to support dynamic line settings.  Various improvements
  *      and features.
  *
  *  Neil Whelchel
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 65967b36365f..4de6ef0ae52a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -17,7 +17,7 @@
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
  *
- * See http://ftdi-usb-sio.sourceforge.net for upto date testing info
+ * See http://ftdi-usb-sio.sourceforge.net for up to date testing info
  *	and extra documentation
  *
  * Change entries from 2004 and earlier can be found in versions of this
@@ -151,6 +151,8 @@ static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
  * /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
  */
 static struct usb_device_id id_table_combined [] = {
+	{ USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
@@ -525,6 +527,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
 	{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
 	{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
+	{ USB_DEVICE(OCT_VID, OCT_DK201_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
@@ -787,6 +790,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
+	{ USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
+	{ USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
 	{ USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
 	{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index c543e55bafba..efffc23723bd 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -300,6 +300,8 @@
  * Hameg HO820 and HO870 interface (using VID 0x0403)
  */
 #define HAMEG_HO820_PID			0xed74
+#define HAMEG_HO730_PID			0xed73
+#define HAMEG_HO720_PID			0xed72
 #define HAMEG_HO870_PID			0xed71
 
 /*
@@ -572,6 +574,7 @@
 /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
 /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
 /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
+#define OCT_DK201_PID		0x0103	/* OCT DK201 USB docking station */
 #define OCT_US101_PID		0x0421	/* OCT US101 USB to RS-232 */
 
 /*
@@ -1141,3 +1144,12 @@
 #define QIHARDWARE_VID			0x20B7
 #define MILKYMISTONE_JTAGSERIAL_PID	0x0713
 
+/*
+ * CTI GmbH RS485 Converter http://www.cti-lean.com/
+ */
+/* USB-485-Mini*/
+#define FTDI_CTI_MINI_PID	0xF608
+/* USB-Nano-485*/
+#define FTDI_CTI_NANO_PID	0xF60B
+
+
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index f1aedfa7c420..abf095be5753 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1981,7 +1981,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 	if (code == IOSP_STATUS_OPEN_RSP) {
 		edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
 		edge_port->maxTxCredits = edge_port->txCredits;
-		dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
+		dbg("%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
 		handle_new_msr(edge_port, byte2);
 
 		/* send the current line settings to the port so we are
diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h
index dced7ec65470..ad9c1d47a619 100644
--- a/drivers/usb/serial/io_edgeport.h
+++ b/drivers/usb/serial/io_edgeport.h
@@ -68,7 +68,7 @@ struct comMapper {
 #define PROC_SET_COM_ENTRY		2
 
 
-/* The following sturcture is passed to the write */
+/* The following structure is passed to the write */
 struct procWrite {
 	int	Command;
 	union {
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index d8434910fa7b..0aac00afb5c8 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -433,7 +433,7 @@ static int write_i2c_mem(struct edgeport_serial *serial,
 
 	/* We can only send a maximum of 1 aligned byte page at a time */
 
-	/* calulate the number of bytes left in the first page */
+	/* calculate the number of bytes left in the first page */
 	write_length = EPROM_PAGE_SIZE -
 				(start_address & (EPROM_PAGE_SIZE - 1));
 
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index d2c019637e45..ba0d28727ccb 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -106,7 +106,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state);
 static int  mct_u232_tiocmget(struct tty_struct *tty);
 static int  mct_u232_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear);
-static int  mct_u232_ioctl(struct tty_struct *tty, struct file *file,
+static int  mct_u232_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg);
 static int  mct_u232_get_icount(struct tty_struct *tty,
 			struct serial_icounter_struct *icount);
@@ -874,7 +874,7 @@ static void mct_u232_unthrottle(struct tty_struct *tty)
 	}
 }
 
-static int  mct_u232_ioctl(struct tty_struct *tty, struct file *file,
+static int  mct_u232_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg)
 {
 	DEFINE_WAIT(wait);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 201f6096844b..1b5633f46984 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -116,7 +116,7 @@ static void opticon_read_bulk_callback(struct urb *urb)
 		} else {
 			if ((data[0] == 0x00) && (data[1] == 0x01)) {
 				spin_lock_irqsave(&priv->lock, flags);
-				/* CTS status infomation package */
+				/* CTS status information package */
 				if (data[2] == 0x00)
 					priv->cts = false;
 				else
@@ -413,7 +413,7 @@ static int opticon_tiocmget(struct tty_struct *tty)
 	return result;
 }
 
-static int opticon_tiocmset(struct tty_struct *tty, struct file *file,
+static int opticon_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 75c7f456eed5..d77ff0435896 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -407,6 +407,10 @@ static void option_instat_callback(struct urb *urb);
 /* ONDA MT825UP HSDPA 14.2 modem */
 #define ONDA_MT825UP         0x000b
 
+/* Samsung products */
+#define SAMSUNG_VENDOR_ID                       0x04e8
+#define SAMSUNG_PRODUCT_GT_B3730                0x6889
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -968,6 +972,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
+	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730/GT-B3710 LTE USB modem.*/
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 8858201eb1d3..54a9dab1f33b 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -111,7 +111,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 	ifnum = intf->desc.bInterfaceNumber;
 	dbg("This Interface = %d", ifnum);
 
-	data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private),
+	data = kzalloc(sizeof(struct usb_wwan_intf_private),
 					 GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -134,8 +134,10 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 		    usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
 			dbg("QDL port found");
 
-			if (serial->interface->num_altsetting == 1)
-				return 0;
+			if (serial->interface->num_altsetting == 1) {
+				retval = 0; /* Success */
+				break;
+			}
 
 			retval = usb_set_interface(serial->dev, ifnum, 1);
 			if (retval < 0) {
@@ -145,7 +147,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 				retval = -ENODEV;
 				kfree(data);
 			}
-			return retval;
 		}
 		break;
 
@@ -166,6 +167,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 					"Could not set interface, error %d\n",
 					retval);
 				retval = -ENODEV;
+				kfree(data);
 			}
 		} else if (ifnum == 2) {
 			dbg("Modem port found");
@@ -177,7 +179,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 				retval = -ENODEV;
 				kfree(data);
 			}
-			return retval;
 		} else if (ifnum==3) {
 			/*
 			 * NMEA (serial line 9600 8N1)
@@ -191,6 +192,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 					"Could not set interface, error %d\n",
 					retval);
 				retval = -ENODEV;
+				kfree(data);
 			}
 		}
 		break;
@@ -199,12 +201,27 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 		dev_err(&serial->dev->dev,
 			"unknown number of interfaces: %d\n", nintf);
 		kfree(data);
-		return -ENODEV;
+		retval = -ENODEV;
 	}
 
+	/* Set serial->private if not returning -ENODEV */
+	if (retval != -ENODEV)
+		usb_set_serial_data(serial, data);
 	return retval;
 }
 
+static void qc_release(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
+
+	dbg("%s", __func__);
+
+	/* Call usb_wwan release & free the private data allocated in qcprobe */
+	usb_wwan_release(serial);
+	usb_set_serial_data(serial, NULL);
+	kfree(priv);
+}
+
 static struct usb_serial_driver qcdevice = {
 	.driver = {
 		.owner     = THIS_MODULE,
@@ -222,7 +239,7 @@ static struct usb_serial_driver qcdevice = {
 	.chars_in_buffer     = usb_wwan_chars_in_buffer,
 	.attach		     = usb_wwan_startup,
 	.disconnect	     = usb_wwan_disconnect,
-	.release	     = usb_wwan_release,
+	.release	     = qc_release,
 #ifdef CONFIG_PM
 	.suspend	     = usb_wwan_suspend,
 	.resume		     = usb_wwan_resume,
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index a65ddd543869..e4fad5e643d7 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -698,8 +698,7 @@ static void play_delayed(struct usb_serial_port *port)
 			/* we have to throw away the rest */
 			do {
 				unbusy_queued_urb(urb, portdata);
-				//extremely dirty
-				atomic_dec(&port->serial->interface->dev.power.usage_count);
+				usb_autopm_put_interface_no_suspend(port->serial->interface);
 			} while ((urb = usb_get_from_anchor(&portdata->delayed)));
 			break;
 		}
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index 08e03745e251..0e5aafda4537 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -562,7 +562,7 @@ static int ene_sd_init(struct us_data *us)
 
 	result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0);
 	if (result != USB_STOR_XFER_GOOD) {
-		US_DEBUGP("Exection SD Init Code Fail !!\n");
+		US_DEBUGP("Execution SD Init Code Fail !!\n");
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
@@ -581,7 +581,7 @@ static int ene_sd_init(struct us_data *us)
 
 	result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
 	if (result != USB_STOR_XFER_GOOD) {
-		US_DEBUGP("Exection SD Init Code Fail !!\n");
+		US_DEBUGP("Execution SD Init Code Fail !!\n");
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 6b9982cd5423..09e52ba47ddf 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1510,7 +1510,7 @@ static int isd200_Initialization(struct us_data *us)
  * Protocol and Transport for the ISD200 ASIC
  *
  * This protocol and transport are for ATA devices connected to an ISD200
- * ASIC.  An ATAPI device that is conected as a slave device will be
+ * ASIC.  An ATAPI device that is connected as a slave device will be
  * detected in the driver initialization function and the protocol will
  * be changed to an ATAPI protocol (Transparent SCSI).
  *
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 689ee1fb702a..13b8bcdf3dba 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -123,7 +123,7 @@ static int slave_configure(struct scsi_device *sdev)
 {
 	struct us_data *us = host_to_us(sdev->host);
 
-	/* Many devices have trouble transfering more than 32KB at a time,
+	/* Many devices have trouble transferring more than 32KB at a time,
 	 * while others have trouble with more than 64K. At this time we
 	 * are limiting both to 32K (64 sectores).
 	 */
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index bd3f415893d8..0b00091d2ae9 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -340,7 +340,7 @@ static int usbat_check_status(struct us_data *us)
 }
 
 /*
- * Stores critical information in internal registers in prepartion for the execution
+ * Stores critical information in internal registers in preparation for the execution
  * of a conditional usbat_read_blocks or usbat_write_blocks call.
  */
 static int usbat_set_shuttle_features(struct us_data *us,
diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c
index 827c87f10cc5..7e4bf95f8f7b 100644
--- a/drivers/usb/wusbcore/crypto.c
+++ b/drivers/usb/wusbcore/crypto.c
@@ -180,7 +180,7 @@ static void bytewise_xor(void *_bo, const void *_bi1, const void *_bi2,
  *     using the 14 bytes of @a to fill up
  *     b1.{mac_header,e0,security_reserved,padding}.
  *
- * NOTE: The definiton of l(a) in WUSB1.0[6.5] vs the definition of
+ * NOTE: The definition of l(a) in WUSB1.0[6.5] vs the definition of
  *       l(m) is orthogonal, they bear no relationship, so it is not
  *       in conflict with the parameter's relation that
  *       WUSB1.0[6.4.2]) defines.
@@ -272,7 +272,7 @@ static int wusb_ccm_mac(struct crypto_blkcipher *tfm_cbc,
 
 	/* Now we crypt the MIC Tag (*iv) with Ax -- values per WUSB1.0[6.5]
 	 * The procedure is to AES crypt the A0 block and XOR the MIC
-	 * Tag agains it; we only do the first 8 bytes and place it
+	 * Tag against it; we only do the first 8 bytes and place it
 	 * directly in the destination buffer.
 	 *
 	 * POS Crypto API: size is assumed to be AES's block size.
diff --git a/drivers/usb/wusbcore/reservation.c b/drivers/usb/wusbcore/reservation.c
index 4ed97360c046..6f4fafdc2401 100644
--- a/drivers/usb/wusbcore/reservation.c
+++ b/drivers/usb/wusbcore/reservation.c
@@ -71,7 +71,7 @@ static void wusbhc_rsv_complete_cb(struct uwb_rsv *rsv)
 
 /**
  * wusbhc_rsv_establish - establish a reservation for the cluster
- * @wusbhc: the WUSB HC requesting a bandwith reservation
+ * @wusbhc: the WUSB HC requesting a bandwidth reservation
  */
 int wusbhc_rsv_establish(struct wusbhc *wusbhc)
 {
diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c
index c175b7300c73..39de3900ad20 100644
--- a/drivers/usb/wusbcore/rh.c
+++ b/drivers/usb/wusbcore/rh.c
@@ -133,7 +133,7 @@ static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx)
  *           big of a problem [and we can't make it an spinlock
  *           because other parts need to take it and sleep] .
  *
- *           @usb_hcd is refcounted, so it won't dissapear under us
+ *           @usb_hcd is refcounted, so it won't disappear under us
  *           and before killing a host, the polling of the root hub
  *           would be stopped anyway.
  */
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c
index 8cb9d80207fa..ca80171f42c6 100644
--- a/drivers/usb/wusbcore/wa-rpipe.c
+++ b/drivers/usb/wusbcore/wa-rpipe.c
@@ -24,7 +24,7 @@
  *
  * RPIPE
  *
- *   Targetted at different downstream endpoints
+ *   Targeted at different downstream endpoints
  *
  *   Descriptor: use to config the remote pipe.
  *
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 84b744c428a4..6ccd93a9b909 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -61,7 +61,7 @@
  *
  *     Two methods it could be done:
  *
- *     (a) set up a timer everytime an rpipe's use count drops to 1
+ *     (a) set up a timer every time an rpipe's use count drops to 1
  *         (which means unused) or when a transfer ends. Reset the
  *         timer when a xfer is queued. If the timer expires, release
  *         the rpipe [see rpipe_ep_disable()].
@@ -140,7 +140,7 @@ struct wa_xfer {
 
 	struct wahc *wa;		/* Wire adapter we are plugged to */
 	struct usb_host_endpoint *ep;
-	struct urb *urb;		/* URB we are transfering for */
+	struct urb *urb;		/* URB we are transferring for */
 	struct wa_seg **seg;		/* transfer segments */
 	u8 segs, segs_submitted, segs_done;
 	unsigned is_inbound:1;
@@ -161,7 +161,7 @@ static inline void wa_xfer_init(struct wa_xfer *xfer)
 }
 
 /*
- * Destory a transfer structure
+ * Destroy a transfer structure
  *
  * Note that the xfer->seg[index] thingies follow the URB life cycle,
  * so we need to put them, not free them.
@@ -494,7 +494,7 @@ static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer,
  * function does almost the same thing and they work closely
  * together.
  *
- * If the seg request has failed but this DTO phase has suceeded,
+ * If the seg request has failed but this DTO phase has succeeded,
  * wa_seg_cb() has already failed the segment and moved the
  * status to WA_SEG_ERROR, so this will go through 'case 0' and
  * effectively do nothing.
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
index 6bd426b7ec07..3a2d09162e70 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -231,7 +231,7 @@ struct wusb_port {
  *
  *    Most of the times when you need to use it, it will be non-NULL,
  *    so there is no real need to check for it (wusb_dev will
- *    dissapear before usb_dev).
+ *    disappear before usb_dev).
  *
  *  - The following fields need to be filled out before calling
  *    wusbhc_create(): ports_max, mmcies_max, mmcie_{add,rm}.