Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

90 files changed, 1606 insertions, 1253 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 7fdbc5dad5fd..005043197527 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -23,7 +23,8 @@ config USB_ARCH_HAS_OHCI
 	default y if ARCH_LH7A404
 	default y if ARCH_S3C2410
 	default y if PXA27x
-	default y if ARCH_AT91RM9200
+	default y if ARCH_EP93XX
+	default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261)
 	# PPC:
 	default y if STB03xxx
 	default y if PPC_MPC52xx
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index c7123bf71c58..4710eb02ed64 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -48,7 +48,7 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
 obj-$(CONFIG_USB_SERIAL)	+= serial/
 
 obj-$(CONFIG_USB_AUERSWALD)	+= misc/
-obj-$(CONFIG_USB_CY7C63)	+= misc/
+obj-$(CONFIG_USB_CYPRESS_CY7C63)+= misc/
 obj-$(CONFIG_USB_CYTHERM)	+= misc/
 obj-$(CONFIG_USB_EMI26)		+= misc/
 obj-$(CONFIG_USB_EMI62)		+= misc/
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 3670d77e912c..ca90326f2f5c 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -291,13 +291,13 @@ static void acm_read_bulk(struct urb *urb, struct pt_regs *regs)
 	struct acm_ru *rcv = urb->context;
 	struct acm *acm = rcv->instance;
 	int status = urb->status;
-	dbg("Entering acm_read_bulk with status %d\n", urb->status);
+	dbg("Entering acm_read_bulk with status %d", urb->status);
 
 	if (!ACM_READY(acm))
 		return;
 
 	if (status)
-		dev_dbg(&acm->data->dev, "bulk rx status %d\n", status);
+		dev_dbg(&acm->data->dev, "bulk rx status %d", status);
 
 	buf = rcv->buffer;
 	buf->size = urb->actual_length;
@@ -343,7 +343,7 @@ next_buffer:
 	list_del(&buf->list);
 	spin_unlock(&acm->read_lock);
 
-	dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d\n", buf, buf->size);
+	dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size);
 
 	tty_buffer_request_room(tty, buf->size);
 	if (!acm->throttle)
@@ -394,7 +394,7 @@ urbs:
 		rcv->urb->transfer_dma = buf->dma;
 		rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
-		dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p\n", rcv->urb, rcv, buf);
+		dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p", rcv->urb, rcv, buf);
 
 		/* This shouldn't kill the driver as unsuccessful URBs are returned to the
 		   free-urbs-pool and resubmited ASAP */
@@ -413,7 +413,7 @@ static void acm_write_bulk(struct urb *urb, struct pt_regs *regs)
 {
 	struct acm *acm = (struct acm *)urb->context;
 
-	dbg("Entering acm_write_bulk with status %d\n", urb->status);
+	dbg("Entering acm_write_bulk with status %d", urb->status);
 
 	acm_write_done(acm);
 	acm_write_start(acm);
@@ -424,7 +424,7 @@ static void acm_write_bulk(struct urb *urb, struct pt_regs *regs)
 static void acm_softint(void *private)
 {
 	struct acm *acm = private;
-	dbg("Entering acm_softint.\n");
+	dbg("Entering acm_softint.");
 	
 	if (!ACM_READY(acm))
 		return;
@@ -440,7 +440,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 	struct acm *acm;
 	int rv = -EINVAL;
 	int i;
-	dbg("Entering acm_tty_open.\n");
+	dbg("Entering acm_tty_open.");
 
 	mutex_lock(&open_mutex);
 
@@ -541,7 +541,7 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c
 	int wbn;
 	struct acm_wb *wb;
 
-	dbg("Entering acm_tty_write to write %d bytes,\n", count);
+	dbg("Entering acm_tty_write to write %d bytes,", count);
 
 	if (!ACM_READY(acm))
 		return -EINVAL;
@@ -793,7 +793,7 @@ static int acm_probe (struct usb_interface *intf,
 
 	if (!buflen) {
 		if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) {
-			dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n");
+			dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint");
 			buflen = intf->cur_altsetting->endpoint->extralen;
 			buffer = intf->cur_altsetting->endpoint->extra;
 		} else {
@@ -842,24 +842,24 @@ next_desc:
 
 	if (!union_header) {
 		if (call_interface_num > 0) {
-			dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n");
+			dev_dbg(&intf->dev,"No union descriptor, using call management descriptor");
 			data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
 			control_interface = intf;
 		} else {
-			dev_dbg(&intf->dev,"No union descriptor, giving up\n");
+			dev_dbg(&intf->dev,"No union descriptor, giving up");
 			return -ENODEV;
 		}
 	} else {
 		control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
 		data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
 		if (!control_interface || !data_interface) {
-			dev_dbg(&intf->dev,"no interfaces\n");
+			dev_dbg(&intf->dev,"no interfaces");
 			return -ENODEV;
 		}
 	}
 	
 	if (data_interface_num != call_interface_num)
-		dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.\n");
+		dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.");
 
 skip_normal_probe:
 
@@ -867,7 +867,7 @@ skip_normal_probe:
 	if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) {
 		if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) {
 			struct usb_interface *t;
-			dev_dbg(&intf->dev,"Your device has switched interfaces.\n");
+			dev_dbg(&intf->dev,"Your device has switched interfaces.");
 
 			t = control_interface;
 			control_interface = data_interface;
@@ -878,7 +878,7 @@ skip_normal_probe:
 	}
 	
 	if (usb_interface_claimed(data_interface)) { /* valid in this context */
-		dev_dbg(&intf->dev,"The data interface isn't available\n");
+		dev_dbg(&intf->dev,"The data interface isn't available");
 		return -EBUSY;
 	}
 
@@ -895,7 +895,7 @@ skip_normal_probe:
 	if ((epread->bEndpointAddress & USB_DIR_IN) != USB_DIR_IN) {
 		/* descriptors are swapped */
 		struct usb_endpoint_descriptor *t;
-		dev_dbg(&intf->dev,"The data interface has switched endpoints\n");
+		dev_dbg(&intf->dev,"The data interface has switched endpoints");
 		
 		t = epread;
 		epread = epwrite;
@@ -910,7 +910,7 @@ skip_normal_probe:
 	}
 
 	if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) {
-		dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n");
+		dev_dbg(&intf->dev, "out of memory (acm kzalloc)");
 		goto alloc_fail;
 	}
 
@@ -936,26 +936,26 @@ skip_normal_probe:
 
 	buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
 	if (!buf) {
-		dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)\n");
+		dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)");
 		goto alloc_fail2;
 	}
 	acm->ctrl_buffer = buf;
 
 	if (acm_write_buffers_alloc(acm) < 0) {
-		dev_dbg(&intf->dev, "out of memory (write buffer alloc)\n");
+		dev_dbg(&intf->dev, "out of memory (write buffer alloc)");
 		goto alloc_fail4;
 	}
 
 	acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!acm->ctrlurb) {
-		dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)\n");
+		dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)");
 		goto alloc_fail5;
 	}
 	for (i = 0; i < num_rx_buf; i++) {
 		struct acm_ru *rcv = &(acm->ru[i]);
 
 		if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) {
-			dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n");
+			dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)");
 			goto alloc_fail7;
 		}
 
@@ -966,13 +966,13 @@ skip_normal_probe:
 		struct acm_rb *buf = &(acm->rb[i]);
 
 		if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) {
-			dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
+			dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)");
 			goto alloc_fail7;
 		}
 	}
 	acm->writeurb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!acm->writeurb) {
-		dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)\n");
+		dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)");
 		goto alloc_fail7;
 	}
 
@@ -1086,6 +1086,9 @@ static struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0ace, 0x1608), /* ZyDAS 56K USB MODEM */
 	.driver_info = SINGLE_RX_URB, /* firmware bug */
 	},
+	{ USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */
+	.driver_info = SINGLE_RX_URB, /* firmware bug */
+	},
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_V25TER) },
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index a08787e253aa..6e3b5358a760 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -31,9 +31,6 @@ config USB_DEVICEFS
 	  For the format of the various /proc/bus/usb/ files, please read
 	  <file:Documentation/usb/proc_usb_info.txt>.
 
-	  Please note that this code is completely unrelated to devfs, the
-	  "/dev file system support".
-
 	  Most users want to say Y here.
 
 config USB_BANDWIDTH
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index f7bdd94b3aa8..218621b9958e 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -517,19 +517,19 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, unsig
 
 static struct usb_device *usbdev_lookup_minor(int minor)
 {
-	struct device *device;
-	struct usb_device *udev = NULL;
+	struct class_device *class_dev;
+	struct usb_device *dev = NULL;
 
 	down(&usb_device_class->sem);
-	list_for_each_entry(device, &usb_device_class->devices, node) {
-		if (device->devt == MKDEV(USB_DEVICE_MAJOR, minor)) {
-			udev = device->platform_data;
+	list_for_each_entry(class_dev, &usb_device_class->children, node) {
+		if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) {
+			dev = class_dev->class_data;
 			break;
 		}
 	}
 	up(&usb_device_class->sem);
 
-	return udev;
+	return dev;
 };
 
 /*
@@ -1580,16 +1580,16 @@ static void usbdev_add(struct usb_device *dev)
 {
 	int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1);
 
-	dev->usbfs_dev = device_create(usb_device_class, &dev->dev,
-				MKDEV(USB_DEVICE_MAJOR, minor),
+	dev->class_dev = class_device_create(usb_device_class, NULL,
+				MKDEV(USB_DEVICE_MAJOR, minor), &dev->dev,
 				"usbdev%d.%d", dev->bus->busnum, dev->devnum);
 
-	dev->usbfs_dev->platform_data = dev;
+	dev->class_dev->class_data = dev;
 }
 
 static void usbdev_remove(struct usb_device *dev)
 {
-	device_unregister(dev->usbfs_dev);
+	class_device_unregister(dev->class_dev);
 }
 
 static int usbdev_notify(struct notifier_block *self, unsigned long action,
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index abee0f5b6a66..8de4f8c99d61 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -194,13 +194,14 @@ int usb_register_dev(struct usb_interface *intf,
 		++temp;
 	else
 		temp = name;
-	intf->usb_dev = device_create(usb_class->class, &intf->dev,
-				      MKDEV(USB_MAJOR, minor), "%s", temp);
-	if (IS_ERR(intf->usb_dev)) {
+	intf->class_dev = class_device_create(usb_class->class, NULL,
+					      MKDEV(USB_MAJOR, minor),
+					      &intf->dev, "%s", temp);
+	if (IS_ERR(intf->class_dev)) {
 		spin_lock (&minor_lock);
 		usb_minors[intf->minor] = NULL;
 		spin_unlock (&minor_lock);
-		retval = PTR_ERR(intf->usb_dev);
+		retval = PTR_ERR(intf->class_dev);
 	}
 exit:
 	return retval;
@@ -241,8 +242,8 @@ void usb_deregister_dev(struct usb_interface *intf,
 	spin_unlock (&minor_lock);
 
 	snprintf(name, BUS_ID_SIZE, class_driver->name, intf->minor - minor_base);
-	device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor));
-	intf->usb_dev = NULL;
+	class_device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor));
+	intf->class_dev = NULL;
 	intf->minor = -1;
 	destroy_usb_class();
 }
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 875596e98e42..26c8cb5f3e67 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1790,7 +1790,10 @@ static int finish_device_resume(struct usb_device *udev)
 	 * and device drivers will know about any resume quirks.
 	 */
 	status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
-	if (status < 2)
+	if (status >= 0)
+		status = (status == 2 ? 0 : -ENODEV);
+
+	if (status)
 		dev_dbg(&udev->dev,
 			"gone after usb resume? status %d\n",
 			status);
@@ -1879,7 +1882,12 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
 			dev_dbg(hub->intfdev,
 				"port %d status %04x.%04x after resume, %d\n",
 				port1, portchange, devstatus, status);
+			if (status >= 0)
+				status = -ENODEV;
 		} else {
+			if (portchange & USB_PORT_STAT_C_SUSPEND)
+				clear_port_feature(hub->hdev, port1,
+						USB_PORT_FEAT_C_SUSPEND);
 			/* TRSMRCY = 10 msec */
 			msleep(10);
 			if (udev)
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index f48c3dbc367a..3182c2224ba2 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -695,7 +695,7 @@ static void usbfs_remove_device(struct usb_device *dev)
 		wake_up_all(&ds->wait);
 		list_del_init(&ds->list);
 		if (ds->discsignr) {
-			sinfo.si_signo = SIGPIPE;
+			sinfo.si_signo = ds->discsignr;
 			sinfo.si_errno = EPIPE;
 			sinfo.si_code = SI_ASYNCIO;
 			sinfo.si_addr = ds->disccontext;
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 363b2ad74ae6..1a32d96774b4 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -207,7 +207,7 @@ config USB_AT91
 
 config USB_GADGET_DUMMY_HCD
 	boolean "Dummy HCD (DEVELOPMENT)"
-	depends on USB && EXPERIMENTAL
+	depends on (USB=y || (USB=m && USB_GADGET=m)) && EXPERIMENTAL
 	select USB_GADGET_DUALSPEED
 	help
 	  This host controller driver emulates USB, looping all data transfer
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 1c459ff037ce..cfebca05ead5 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -57,19 +57,23 @@
 
 /*
  * This controller is simple and PIO-only.  It's used in many AT91-series
- * ARMv4T controllers, including the at91rm9200 (arm920T, with MMU),
- * at91sam9261 (arm926ejs, with MMU), and several no-mmu versions.
+ * full speed USB controllers, including the at91rm9200 (arm920T, with MMU),
+ * at91sam926x (arm926ejs, with MMU), and several no-mmu versions.
  *
  * This driver expects the board has been wired with two GPIOs suppporting
  * a VBUS sensing IRQ, and a D+ pullup.  (They may be omitted, but the
- * testing hasn't covered such cases.)  The pullup is most important; it
+ * testing hasn't covered such cases.)
+ *
+ * The pullup is most important (so it's integrated on sam926x parts).  It
  * provides software control over whether the host enumerates the device.
+ *
  * The VBUS sensing helps during enumeration, and allows both USB clocks
  * (and the transceiver) to stay gated off until they're necessary, saving
- * power.  During USB suspend, the 48 MHz clock is gated off.
+ * power.  During USB suspend, the 48 MHz clock is gated off in hardware;
+ * it may also be gated off by software during some Linux sleep states.
  */
 
-#define	DRIVER_VERSION	"8 March 2005"
+#define	DRIVER_VERSION	"3 May 2006"
 
 static const char driver_name [] = "at91_udc";
 static const char ep0name[] = "ep0";
@@ -316,9 +320,15 @@ static void done(struct at91_ep *ep, struct at91_request *req, int status)
  *
  * There are also state bits like FORCESTALL, EPEDS, DIR, and EPTYPE
  * that shouldn't normally be changed.
+ *
+ * NOTE at91sam9260 docs mention synch between UDPCK and MCK clock domains,
+ * implying a need to wait for one write to complete (test relevant bits)
+ * before starting the next write.  This shouldn't be an issue given how
+ * infrequently we write, except maybe for write-then-read idioms.
  */
 #define	SET_FX	(AT91_UDP_TXPKTRDY)
-#define	CLR_FX	(RX_DATA_READY | AT91_UDP_RXSETUP | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP)
+#define	CLR_FX	(RX_DATA_READY | AT91_UDP_RXSETUP \
+		| AT91_UDP_STALLSENT | AT91_UDP_TXCOMP)
 
 /* pull OUT packet data from the endpoint's fifo */
 static int read_fifo (struct at91_ep *ep, struct at91_request *req)
@@ -472,7 +482,8 @@ static void nuke(struct at91_ep *ep, int status)
 
 /*-------------------------------------------------------------------------*/
 
-static int at91_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+static int at91_ep_enable(struct usb_ep *_ep,
+				const struct usb_endpoint_descriptor *desc)
 {
 	struct at91_ep	*ep = container_of(_ep, struct at91_ep, ep);
 	struct at91_udc	*dev = ep->udc;
@@ -582,11 +593,12 @@ static int at91_ep_disable (struct usb_ep * _ep)
  * interesting for request or buffer allocation.
  */
 
-static struct usb_request *at91_ep_alloc_request (struct usb_ep *_ep, unsigned int gfp_flags)
+static struct usb_request *
+at91_ep_alloc_request(struct usb_ep *_ep, unsigned int gfp_flags)
 {
 	struct at91_request *req;
 
-	req = kcalloc(1, sizeof (struct at91_request), SLAB_KERNEL);
+	req = kcalloc(1, sizeof (struct at91_request), gfp_flags);
 	if (!req)
 		return NULL;
 
@@ -862,6 +874,7 @@ static void stop_activity(struct at91_udc *udc)
 	if (udc->gadget.speed == USB_SPEED_UNKNOWN)
 		driver = NULL;
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->suspended = 0;
 
 	for (i = 0; i < NUM_ENDPOINTS; i++) {
 		struct at91_ep *ep = &udc->ep[i];
@@ -889,8 +902,8 @@ static void clk_off(struct at91_udc *udc)
 		return;
 	udc->clocked = 0;
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	clk_disable(udc->iclk);
 	clk_disable(udc->fclk);
+	clk_disable(udc->iclk);
 }
 
 /*
@@ -911,9 +924,6 @@ static void pullup(struct at91_udc *udc, int is_on)
 		at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
 		at91_set_gpio_value(udc->board.pullup_pin, 0);
 		clk_off(udc);
-
-		// REVISIT:  with transceiver disabled, will D- float
-		// so that a host would falsely detect a device?
 	}
 }
 
@@ -1290,7 +1300,8 @@ static void handle_ep0(struct at91_udc *udc)
 			if (udc->wait_for_addr_ack) {
 				u32	tmp;
 
-				at91_udp_write(AT91_UDP_FADDR, AT91_UDP_FEN | udc->addr);
+				at91_udp_write(AT91_UDP_FADDR,
+						AT91_UDP_FEN | udc->addr);
 				tmp = at91_udp_read(AT91_UDP_GLB_STAT);
 				tmp &= ~AT91_UDP_FADDEN;
 				if (udc->addr)
@@ -1361,9 +1372,10 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc, struct pt_regs *r)
 	u32			rescans = 5;
 
 	while (rescans--) {
-		u32	status = at91_udp_read(AT91_UDP_ISR);
+		u32 status;
 
-		status &= at91_udp_read(AT91_UDP_IMR);
+		status = at91_udp_read(AT91_UDP_ISR)
+			& at91_udp_read(AT91_UDP_IMR);
 		if (!status)
 			break;
 
@@ -1379,18 +1391,17 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc, struct pt_regs *r)
 			stop_activity(udc);
 
 			/* enable ep0 */
-			at91_udp_write(AT91_UDP_CSR(0), AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL);
+			at91_udp_write(AT91_UDP_CSR(0),
+					AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL);
 			udc->gadget.speed = USB_SPEED_FULL;
 			udc->suspended = 0;
 			at91_udp_write(AT91_UDP_IER, AT91_UDP_EP(0));
 
 			/*
 			 * NOTE:  this driver keeps clocks off unless the
-			 * USB host is present.  That saves power, and also
-			 * eliminates IRQs (reset, resume, suspend) that can
-			 * otherwise flood from the controller.  If your
-			 * board doesn't support VBUS detection, suspend and
-			 * resume irq logic may need more attention...
+			 * USB host is present.  That saves power, but for
+			 * boards that don't support VBUS detection, both
+			 * clocks need to be active most of the time.
 			 */
 
 		/* host initiated suspend (3+ms bus idle) */
@@ -1452,13 +1463,19 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc, struct pt_regs *r)
 
 /*-------------------------------------------------------------------------*/
 
+static void nop_release(struct device *dev)
+{
+	/* nothing to free */
+}
+
 static struct at91_udc controller = {
 	.gadget = {
-		.ops = &at91_udc_ops,
-		.ep0 = &controller.ep[0].ep,
-		.name = driver_name,
-		.dev = {
-			.bus_id = "gadget"
+		.ops	= &at91_udc_ops,
+		.ep0	= &controller.ep[0].ep,
+		.name	= driver_name,
+		.dev	= {
+			.bus_id = "gadget",
+			.release = nop_release,
 		}
 	},
 	.ep[0] = {
@@ -1468,7 +1485,8 @@ static struct at91_udc controller = {
 		},
 		.udc		= &controller,
 		.maxpacket	= 8,
-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(0)),
+		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+					+ AT91_UDP_CSR(0)),
 		.int_mask	= 1 << 0,
 	},
 	.ep[1] = {
@@ -1479,7 +1497,8 @@ static struct at91_udc controller = {
 		.udc		= &controller,
 		.is_pingpong	= 1,
 		.maxpacket	= 64,
-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(1)),
+		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+					+ AT91_UDP_CSR(1)),
 		.int_mask	= 1 << 1,
 	},
 	.ep[2] = {
@@ -1490,7 +1509,8 @@ static struct at91_udc controller = {
 		.udc		= &controller,
 		.is_pingpong	= 1,
 		.maxpacket	= 64,
-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(2)),
+		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+					+ AT91_UDP_CSR(2)),
 		.int_mask	= 1 << 2,
 	},
 	.ep[3] = {
@@ -1501,7 +1521,8 @@ static struct at91_udc controller = {
 		},
 		.udc		= &controller,
 		.maxpacket	= 8,
-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(3)),
+		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+					+ AT91_UDP_CSR(3)),
 		.int_mask	= 1 << 3,
 	},
 	.ep[4] = {
@@ -1512,7 +1533,8 @@ static struct at91_udc controller = {
 		.udc		= &controller,
 		.is_pingpong	= 1,
 		.maxpacket	= 256,
-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(4)),
+		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+					+ AT91_UDP_CSR(4)),
 		.int_mask	= 1 << 4,
 	},
 	.ep[5] = {
@@ -1523,10 +1545,11 @@ static struct at91_udc controller = {
 		.udc		= &controller,
 		.is_pingpong	= 1,
 		.maxpacket	= 256,
-		.creg		= (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(5)),
+		.creg		= (void __iomem *)(AT91_VA_BASE_UDP
+					+ AT91_UDP_CSR(5)),
 		.int_mask	= 1 << 5,
 	},
-	/* ep6 and ep7 are also reserved */
+	/* ep6 and ep7 are also reserved (custom silicon might use them) */
 };
 
 static irqreturn_t at91_vbus_irq(int irq, void *_udc, struct pt_regs *r)
@@ -1593,6 +1616,7 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
 
 	local_irq_disable();
 	udc->enabled = 0;
+	at91_udp_write(AT91_UDP_IDR, ~0);
 	pullup(udc, 0);
 	local_irq_enable();
 
@@ -1624,6 +1648,16 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	if (pdev->num_resources != 2) {
+		DBG("invalid num_resources");
+		return -ENODEV;
+	}
+	if ((pdev->resource[0].flags != IORESOURCE_MEM)
+			|| (pdev->resource[1].flags != IORESOURCE_IRQ)) {
+		DBG("invalid resource type");
+		return -ENODEV;
+	}
+
 	if (!request_mem_region(AT91_BASE_UDP, SZ_16K, driver_name)) {
 		DBG("someone's using UDC memory\n");
 		return -EBUSY;
@@ -1649,19 +1683,26 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
 	if (retval < 0)
 		goto fail0;
 
-	/* disable everything until there's a gadget driver and vbus */
-	pullup(udc, 0);
+	/* don't do anything until we have both gadget driver and VBUS */
+	clk_enable(udc->iclk);
+	at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
+	at91_udp_write(AT91_UDP_IDR, 0xffffffff);
+	clk_disable(udc->iclk);
 
 	/* request UDC and maybe VBUS irqs */
-	if (request_irq(AT91_ID_UDP, at91_udc_irq, IRQF_DISABLED, driver_name, udc)) {
-		DBG("request irq %d failed\n", AT91_ID_UDP);
+	udc->udp_irq = platform_get_irq(pdev, 0);
+	if (request_irq(udc->udp_irq, at91_udc_irq,
+			IRQF_DISABLED, driver_name, udc)) {
+		DBG("request irq %d failed\n", udc->udp_irq);
 		retval = -EBUSY;
 		goto fail1;
 	}
 	if (udc->board.vbus_pin > 0) {
-		if (request_irq(udc->board.vbus_pin, at91_vbus_irq, IRQF_DISABLED, driver_name, udc)) {
-			DBG("request vbus irq %d failed\n", udc->board.vbus_pin);
-			free_irq(AT91_ID_UDP, udc);
+		if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
+				IRQF_DISABLED, driver_name, udc)) {
+			DBG("request vbus irq %d failed\n",
+					udc->board.vbus_pin);
+			free_irq(udc->udp_irq, udc);
 			retval = -EBUSY;
 			goto fail1;
 		}
@@ -1670,6 +1711,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
 		udc->vbus = 1;
 	}
 	dev_set_drvdata(dev, udc);
+	device_init_wakeup(dev, 1);
 	create_debug_file(udc);
 
 	INFO("%s version %s\n", driver_name, DRIVER_VERSION);
@@ -1678,14 +1720,14 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
 fail1:
 	device_unregister(&udc->gadget.dev);
 fail0:
-	release_mem_region(AT91_VA_BASE_UDP, SZ_16K);
+	release_mem_region(AT91_BASE_UDP, SZ_16K);
 	DBG("%s probe failed, %d\n", driver_name, retval);
 	return retval;
 }
 
-static int __devexit at91udc_remove(struct platform_device *dev)
+static int __devexit at91udc_remove(struct platform_device *pdev)
 {
-	struct at91_udc *udc = platform_get_drvdata(dev);
+	struct at91_udc *udc = platform_get_drvdata(pdev);
 
 	DBG("remove\n");
 
@@ -1694,10 +1736,11 @@ static int __devexit at91udc_remove(struct platform_device *dev)
 	if (udc->driver != 0)
 		usb_gadget_unregister_driver(udc->driver);
 
+	device_init_wakeup(&pdev->dev, 0);
 	remove_debug_file(udc);
 	if (udc->board.vbus_pin > 0)
 		free_irq(udc->board.vbus_pin, udc);
-	free_irq(AT91_ID_UDP, udc);
+	free_irq(udc->udp_irq, udc);
 	device_unregister(&udc->gadget.dev);
 	release_mem_region(AT91_BASE_UDP, SZ_16K);
 
@@ -1708,31 +1751,36 @@ static int __devexit at91udc_remove(struct platform_device *dev)
 }
 
 #ifdef CONFIG_PM
-static int at91udc_suspend(struct platform_device *dev, pm_message_t mesg)
+static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
-	struct at91_udc *udc = platform_get_drvdata(dev);
+	struct at91_udc *udc = platform_get_drvdata(pdev);
+	int		wake = udc->driver && device_may_wakeup(&pdev->dev);
 
-	/*
-	 * The "safe" suspend transitions are opportunistic ... e.g. when
-	 * the USB link is suspended (48MHz clock autogated off), or when
-	 * it's disconnected (programmatically gated off, elsewhere).
-	 * Then we can suspend, and the chip can enter slow clock mode.
-	 *
-	 * The problem case is some component (user mode?) suspending this
-	 * device while it's active, with the 48 MHz clock in use.  There
-	 * are two basic approaches:  (a) veto suspend levels involving slow
-	 * clock mode, (b) disconnect, so 48 MHz will no longer be in use
-	 * and we can enter slow clock mode.  This uses (b) for now, since
-	 * it's simplest until AT91 PM exists and supports the other option.
+	/* Unless we can act normally to the host (letting it wake us up
+	 * whenever it has work for us) force disconnect.  Wakeup requires
+	 * PLLB for USB events (signaling for reset, wakeup, or incoming
+	 * tokens) and VBUS irqs (on systems which support them).
 	 */
-	if (udc->vbus && !udc->suspended)
+	if ((!udc->suspended && udc->addr)
+			|| !wake
+			|| at91_suspend_entering_slow_clock()) {
 		pullup(udc, 0);
+		disable_irq_wake(udc->udp_irq);
+	} else
+		enable_irq_wake(udc->udp_irq);
+
+	if (udc->board.vbus_pin > 0) {
+		if (wake)
+			enable_irq_wake(udc->board.vbus_pin);
+		else
+			disable_irq_wake(udc->board.vbus_pin);
+	}
 	return 0;
 }
 
-static int at91udc_resume(struct platform_device *dev)
+static int at91udc_resume(struct platform_device *pdev)
 {
-	struct at91_udc *udc = platform_get_drvdata(dev);
+	struct at91_udc *udc = platform_get_drvdata(pdev);
 
 	/* maybe reconnect to host; if so, clocks on */
 	pullup(udc, 1);
@@ -1748,7 +1796,7 @@ static struct platform_driver at91_udc = {
 	.remove		= __devexit_p(at91udc_remove),
 	.shutdown	= at91udc_shutdown,
 	.suspend	= at91udc_suspend,
-	.resume 	= at91udc_resume,
+	.resume		= at91udc_resume,
 	.driver		= {
 		.name	= (char *) driver_name,
 		.owner	= THIS_MODULE,
@@ -1767,6 +1815,6 @@ static void __devexit udc_exit_module(void)
 }
 module_exit(udc_exit_module);
 
-MODULE_DESCRIPTION("AT91RM9200 udc driver");
+MODULE_DESCRIPTION("AT91 udc driver");
 MODULE_AUTHOR("Thomas Rathbone, David Brownell");
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index 5a4799cedd19..882af42e86cc 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -141,6 +141,7 @@ struct at91_udc {
 	struct clk			*iclk, *fclk;
 	struct platform_device		*pdev;
 	struct proc_dir_entry		*pde;
+	int				udp_irq;
 };
 
 static inline struct at91_udc *to_udc(struct usb_gadget *g)
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 4be47195bd38..7d1c22c34957 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -609,7 +609,8 @@ static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req)
 	if (!dum->driver)
 		return -ESHUTDOWN;
 
-	spin_lock_irqsave (&dum->lock, flags);
+	local_irq_save (flags);
+	spin_lock (&dum->lock);
 	list_for_each_entry (req, &ep->queue, queue) {
 		if (&req->req == _req) {
 			list_del_init (&req->queue);
@@ -618,7 +619,7 @@ static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req)
 			break;
 		}
 	}
-	spin_unlock_irqrestore (&dum->lock, flags);
+	spin_unlock (&dum->lock);
 
 	if (retval == 0) {
 		dev_dbg (udc_dev(dum),
@@ -626,6 +627,7 @@ static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req)
 				req, _ep->name, _req->length, _req->buf);
 		_req->complete (_ep, _req);
 	}
+	local_irq_restore (flags);
 	return retval;
 }
 
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index f7c6d758e1b0..53d584589c26 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -34,12 +34,12 @@
 
 
 /* we must assign addresses for configurable endpoints (like net2280) */
-static __initdata unsigned epnum;
+static __devinitdata unsigned epnum;
 
 // #define MANY_ENDPOINTS
 #ifdef MANY_ENDPOINTS
 /* more than 15 configurable endpoints */
-static __initdata unsigned in_epnum;
+static __devinitdata unsigned in_epnum;
 #endif
 
 
@@ -59,7 +59,7 @@ static __initdata unsigned in_epnum;
  * NOTE:  each endpoint is unidirectional, as specified by its USB
  * descriptor; and isn't specific to a configuration or altsetting.
  */
-static int __init
+static int __devinit
 ep_matches (
 	struct usb_gadget		*gadget,
 	struct usb_ep			*ep,
@@ -73,7 +73,7 @@ ep_matches (
 	/* endpoint already claimed? */
 	if (0 != ep->driver_data)
 		return 0;
-		
+
 	/* only support ep0 for portable CONTROL traffic */
 	type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
 	if (USB_ENDPOINT_XFER_CONTROL == type)
@@ -186,7 +186,7 @@ ep_matches (
 	return 1;
 }
 
-static struct usb_ep * __init
+static struct usb_ep * __devinit
 find_ep (struct usb_gadget *gadget, const char *name)
 {
 	struct usb_ep	*ep;
@@ -228,7 +228,7 @@ find_ep (struct usb_gadget *gadget, const char *name)
  *
  * On failure, this returns a null endpoint descriptor.
  */
-struct usb_ep * __init usb_ep_autoconfig (
+struct usb_ep * __devinit usb_ep_autoconfig (
 	struct usb_gadget		*gadget,
 	struct usb_endpoint_descriptor	*desc
 )
@@ -276,7 +276,7 @@ struct usb_ep * __init usb_ep_autoconfig (
 			return ep;
 	}
 
-	/* Second, look at endpoints until an unclaimed one looks usable */ 
+	/* Second, look at endpoints until an unclaimed one looks usable */
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
 		if (ep_matches (gadget, ep, desc))
 			return ep;
@@ -295,7 +295,7 @@ struct usb_ep * __init usb_ep_autoconfig (
  * state such as ep->driver_data and the record of assigned endpoints
  * used by usb_ep_autoconfig().
  */
-void __init usb_ep_autoconfig_reset (struct usb_gadget *gadget)
+void __devinit usb_ep_autoconfig_reset (struct usb_gadget *gadget)
 {
 	struct usb_ep	*ep;
 
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 8320fcef0425..30299c620d97 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -117,6 +117,8 @@ struct eth_dev {
 	struct usb_ep		*in_ep, *out_ep, *status_ep;
 	const struct usb_endpoint_descriptor
 				*in, *out, *status;
+
+	spinlock_t		req_lock;
 	struct list_head	tx_reqs, rx_reqs;
 
 	struct net_device	*net;
@@ -1066,21 +1068,31 @@ static void eth_reset_config (struct eth_dev *dev)
 	 */
 	if (dev->in) {
 		usb_ep_disable (dev->in_ep);
+		spin_lock(&dev->req_lock);
 		while (likely (!list_empty (&dev->tx_reqs))) {
 			req = container_of (dev->tx_reqs.next,
 						struct usb_request, list);
 			list_del (&req->list);
+
+			spin_unlock(&dev->req_lock);
 			usb_ep_free_request (dev->in_ep, req);
+			spin_lock(&dev->req_lock);
 		}
+		spin_unlock(&dev->req_lock);
 	}
 	if (dev->out) {
 		usb_ep_disable (dev->out_ep);
+		spin_lock(&dev->req_lock);
 		while (likely (!list_empty (&dev->rx_reqs))) {
 			req = container_of (dev->rx_reqs.next,
 						struct usb_request, list);
 			list_del (&req->list);
+
+			spin_unlock(&dev->req_lock);
 			usb_ep_free_request (dev->out_ep, req);
+			spin_lock(&dev->req_lock);
 		}
+		spin_unlock(&dev->req_lock);
 	}
 
 	if (dev->status) {
@@ -1659,9 +1671,9 @@ enomem:
 	if (retval) {
 		DEBUG (dev, "rx submit --> %d\n", retval);
 		dev_kfree_skb_any (skb);
-		spin_lock (&dev->lock);
+		spin_lock(&dev->req_lock);
 		list_add (&req->list, &dev->rx_reqs);
-		spin_unlock (&dev->lock);
+		spin_unlock(&dev->req_lock);
 	}
 	return retval;
 }
@@ -1730,8 +1742,9 @@ quiesce:
 		dev_kfree_skb_any (skb);
 	if (!netif_running (dev->net)) {
 clean:
-		/* nobody reading rx_reqs, so no dev->lock */
+		spin_lock(&dev->req_lock);
 		list_add (&req->list, &dev->rx_reqs);
+		spin_unlock(&dev->req_lock);
 		req = NULL;
 	}
 	if (req)
@@ -1782,15 +1795,18 @@ static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags)
 {
 	int status;
 
+	spin_lock(&dev->req_lock);
 	status = prealloc (&dev->tx_reqs, dev->in_ep, n, gfp_flags);
 	if (status < 0)
 		goto fail;
 	status = prealloc (&dev->rx_reqs, dev->out_ep, n, gfp_flags);
 	if (status < 0)
 		goto fail;
-	return 0;
+	goto done;
 fail:
 	DEBUG (dev, "can't alloc requests\n");
+done:
+	spin_unlock(&dev->req_lock);
 	return status;
 }
 
@@ -1800,21 +1816,21 @@ static void rx_fill (struct eth_dev *dev, gfp_t gfp_flags)
 	unsigned long		flags;
 
 	/* fill unused rxq slots with some skb */
-	spin_lock_irqsave (&dev->lock, flags);
+	spin_lock_irqsave(&dev->req_lock, flags);
 	while (!list_empty (&dev->rx_reqs)) {
 		req = container_of (dev->rx_reqs.next,
 				struct usb_request, list);
 		list_del_init (&req->list);
-		spin_unlock_irqrestore (&dev->lock, flags);
+		spin_unlock_irqrestore(&dev->req_lock, flags);
 
 		if (rx_submit (dev, req, gfp_flags) < 0) {
 			defer_kevent (dev, WORK_RX_MEMORY);
 			return;
 		}
 
-		spin_lock_irqsave (&dev->lock, flags);
+		spin_lock_irqsave(&dev->req_lock, flags);
 	}
-	spin_unlock_irqrestore (&dev->lock, flags);
+	spin_unlock_irqrestore(&dev->req_lock, flags);
 }
 
 static void eth_work (void *_dev)
@@ -1848,9 +1864,9 @@ static void tx_complete (struct usb_ep *ep, struct usb_request *req)
 	}
 	dev->stats.tx_packets++;
 
-	spin_lock (&dev->lock);
+	spin_lock(&dev->req_lock);
 	list_add (&req->list, &dev->tx_reqs);
-	spin_unlock (&dev->lock);
+	spin_unlock(&dev->req_lock);
 	dev_kfree_skb_any (skb);
 
 	atomic_dec (&dev->tx_qlen);
@@ -1896,12 +1912,12 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
 		/* ignores USB_CDC_PACKET_TYPE_DIRECTED */
 	}
 
-	spin_lock_irqsave (&dev->lock, flags);
+	spin_lock_irqsave(&dev->req_lock, flags);
 	req = container_of (dev->tx_reqs.next, struct usb_request, list);
 	list_del (&req->list);
 	if (list_empty (&dev->tx_reqs))
 		netif_stop_queue (net);
-	spin_unlock_irqrestore (&dev->lock, flags);
+	spin_unlock_irqrestore(&dev->req_lock, flags);
 
 	/* no buffer copies needed, unless the network stack did it
 	 * or the hardware can't use skb buffers.
@@ -1955,11 +1971,11 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
 drop:
 		dev->stats.tx_dropped++;
 		dev_kfree_skb_any (skb);
-		spin_lock_irqsave (&dev->lock, flags);
+		spin_lock_irqsave(&dev->req_lock, flags);
 		if (list_empty (&dev->tx_reqs))
 			netif_start_queue (net);
 		list_add (&req->list, &dev->tx_reqs);
-		spin_unlock_irqrestore (&dev->lock, flags);
+		spin_unlock_irqrestore(&dev->req_lock, flags);
 	}
 	return 0;
 }
@@ -2131,7 +2147,7 @@ eth_req_free (struct usb_ep *ep, struct usb_request *req)
 }
 
 
-static void __exit
+static void /* __init_or_exit */
 eth_unbind (struct usb_gadget *gadget)
 {
 	struct eth_dev		*dev = get_gadget_data (gadget);
@@ -2158,7 +2174,7 @@ eth_unbind (struct usb_gadget *gadget)
 	set_gadget_data (gadget, NULL);
 }
 
-static u8 __init nibble (unsigned char c)
+static u8 __devinit nibble (unsigned char c)
 {
 	if (likely (isdigit (c)))
 		return c - '0';
@@ -2168,7 +2184,7 @@ static u8 __init nibble (unsigned char c)
 	return 0;
 }
 
-static int __init get_ether_addr(const char *str, u8 *dev_addr)
+static int __devinit get_ether_addr(const char *str, u8 *dev_addr)
 {
 	if (str) {
 		unsigned	i;
@@ -2189,7 +2205,7 @@ static int __init get_ether_addr(const char *str, u8 *dev_addr)
 	return 1;
 }
 
-static int __init
+static int __devinit
 eth_bind (struct usb_gadget *gadget)
 {
 	struct eth_dev		*dev;
@@ -2378,6 +2394,7 @@ autoconf_fail:
 		return status;
 	dev = netdev_priv(net);
 	spin_lock_init (&dev->lock);
+	spin_lock_init (&dev->req_lock);
 	INIT_WORK (&dev->work, eth_work, dev);
 	INIT_LIST_HEAD (&dev->tx_reqs);
 	INIT_LIST_HEAD (&dev->rx_reqs);
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index b1a9cf06f3e6..8d7f1e84cd7b 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3691,7 +3691,7 @@ static void lun_release(struct device *dev)
 	kref_put(&fsg->ref, fsg_release);
 }
 
-static void __exit fsg_unbind(struct usb_gadget *gadget)
+static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
 {
 	struct fsg_dev		*fsg = get_gadget_data(gadget);
 	int			i;
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index 354670d12308..408c3380d602 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -1398,7 +1398,7 @@ static struct proc_dir_entry *rndis_connect_state [RNDIS_MAX_CONFIGS];
 #endif	/* CONFIG_USB_GADGET_DEBUG_FILES */
 
 
-int __init rndis_init (void)
+int __devinit rndis_init (void)
 {
 	u8 i;
 
diff --git a/drivers/usb/gadget/rndis.h b/drivers/usb/gadget/rndis.h
index 2956608be751..4c3c7259f019 100644
--- a/drivers/usb/gadget/rndis.h
+++ b/drivers/usb/gadget/rndis.h
@@ -264,7 +264,7 @@ int  rndis_signal_disconnect (int configNr);
 int  rndis_state (int configNr);
 extern void rndis_set_host_mac (int configNr, const u8 *addr);
 
-int __init rndis_init (void);
+int __devinit rndis_init (void);
 void rndis_exit (void);
 
 #endif  /* _LINUX_RNDIS_H */
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 30d7664d449d..e762aa19ab0a 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -1473,7 +1473,7 @@ autoconf_fail:
  * Called on module unload.  Frees the control request and device
  * structure.
  */
-static void __exit gs_unbind(struct usb_gadget *gadget)
+static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
 {
 	struct gs_dev *dev = get_gadget_data(gadget);
 
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 3a08a7ab4ce0..b7018ee487ea 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -1121,7 +1121,7 @@ zero_autoresume (unsigned long _dev)
 
 /*-------------------------------------------------------------------------*/
 
-static void __exit
+static void /* __init_or_exit */
 zero_unbind (struct usb_gadget *gadget)
 {
 	struct zero_dev		*dev = get_gadget_data (gadget);
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index d66867aa527e..26ed757d22a6 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -41,8 +41,6 @@
 #endif
 #define USBH_DISABLE      (USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
 
-#endif				/* Au1200 */
-
 extern int usb_disabled(void);
 
 /*-------------------------------------------------------------------------*/
@@ -107,9 +105,9 @@ int usb_ehci_au1xxx_probe(const struct hc_driver *driver,
 
 	/* Au1200 AB USB does not support coherent memory */
 	if (!(read_c0_prid() & 0xff)) {
-		pr_info("%s: this is chip revision AB!\n", dev->dev.name);
+		pr_info("%s: this is chip revision AB!\n", dev->name);
 		pr_info("%s: update your board or re-configure the kernel\n",
-			dev->dev.name);
+			dev->name);
 		return -ENODEV;
 	}
 #endif
@@ -228,9 +226,8 @@ static const struct hc_driver ehci_au1xxx_hc_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-static int ehci_hcd_au1xxx_drv_probe(struct device *dev)
+static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
 	struct usb_hcd *hcd = NULL;
 	int ret;
 
@@ -243,10 +240,9 @@ static int ehci_hcd_au1xxx_drv_probe(struct device *dev)
 	return ret;
 }
 
-static int ehci_hcd_au1xxx_drv_remove(struct device *dev)
+static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
 	usb_ehci_au1xxx_remove(hcd, pdev);
 	return 0;
@@ -269,12 +265,13 @@ static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
 }
 */
 MODULE_ALIAS("au1xxx-ehci");
-/* FIXME use "struct platform_driver" */
-static struct device_driver ehci_hcd_au1xxx_driver = {
-	.name = "au1xxx-ehci",
-	.bus = &platform_bus_type,
+static struct platform_driver ehci_hcd_au1xxx_driver = {
 	.probe = ehci_hcd_au1xxx_drv_probe,
 	.remove = ehci_hcd_au1xxx_drv_remove,
 	/*.suspend      = ehci_hcd_au1xxx_drv_suspend, */
 	/*.resume       = ehci_hcd_au1xxx_drv_resume, */
+	.driver = {
+		.name = "au1xxx-ehci",
+		.bus = &platform_bus_type
+	}
 };
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index cee6f538de0a..d63177a8eaea 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -625,10 +625,11 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs)
 			writel (status | CMD_RUN, &ehci->regs->command);
 
 		while (i--) {
-			status = readl (&ehci->regs->port_status [i]);
-			if (status & PORT_OWNER)
+			int pstatus = readl (&ehci->regs->port_status [i]);
+
+			if (pstatus & PORT_OWNER)
 				continue;
-			if (!(status & PORT_RESUME)
+			if (!(pstatus & PORT_RESUME)
 					|| ehci->reset_done [i] != 0)
 				continue;
 
@@ -891,7 +892,7 @@ MODULE_LICENSE ("GPL");
 #define	PCI_DRIVER		ehci_pci_driver
 #endif
 
-#ifdef CONFIG_PPC_83xx
+#ifdef CONFIG_MPC834x
 #include "ehci-fsl.c"
 #define	PLATFORM_DRIVER		ehci_fsl_driver
 #endif
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index cdbafb710000..85cc059705a6 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -4,7 +4,7 @@
  *  Copyright (C) 2004 SAN People (Pty) Ltd.
  *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
  *
- * AT91RM9200 Bus Glue
+ * AT91 Bus Glue
  *
  * Based on fragments of 2.4 driver by Rick Bronson.
  * Based on ohci-omap.c
@@ -19,12 +19,13 @@
 #include <asm/hardware.h>
 #include <asm/arch/board.h>
 
-#ifndef CONFIG_ARCH_AT91RM9200
-#error "CONFIG_ARCH_AT91RM9200 must be defined."
+#ifndef CONFIG_ARCH_AT91
+#error "CONFIG_ARCH_AT91 must be defined."
 #endif
 
 /* interface and function clocks */
 static struct clk *iclk, *fclk;
+static int clocked;
 
 extern int usb_disabled(void);
 
@@ -35,13 +36,14 @@ static void at91_start_hc(struct platform_device *pdev)
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 	struct ohci_regs __iomem *regs = hcd->regs;
 
-	dev_dbg(&pdev->dev, "starting AT91RM9200 OHCI USB Controller\n");
+	dev_dbg(&pdev->dev, "start\n");
 
 	/*
 	 * Start the USB clocks.
 	 */
 	clk_enable(iclk);
 	clk_enable(fclk);
+	clocked = 1;
 
 	/*
 	 * The USB host controller must remain in reset.
@@ -54,7 +56,7 @@ static void at91_stop_hc(struct platform_device *pdev)
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 	struct ohci_regs __iomem *regs = hcd->regs;
 
-	dev_dbg(&pdev->dev, "stopping AT91RM9200 OHCI USB Controller\n");
+	dev_dbg(&pdev->dev, "stop\n");
 
 	/*
 	 * Put the USB host controller into reset.
@@ -66,6 +68,7 @@ static void at91_stop_hc(struct platform_device *pdev)
 	 */
 	clk_disable(fclk);
 	clk_disable(iclk);
+	clocked = 0;
 }
 
 
@@ -78,14 +81,15 @@ static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
 
 
 /**
- * usb_hcd_at91_probe - initialize AT91RM9200-based HCDs
+ * usb_hcd_at91_probe - initialize AT91-based HCDs
  * Context: !in_interrupt()
  *
  * Allocates basic resources for this USB host controller, and
  * then invokes the start() method for the HCD associated with it
  * through the hotplug entry's driver_data.
  */
-int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *pdev)
+static int usb_hcd_at91_probe(const struct hc_driver *driver,
+			struct platform_device *pdev)
 {
 	int retval;
 	struct usb_hcd *hcd = NULL;
@@ -95,12 +99,13 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *
 		return -ENODEV;
 	}
 
-	if ((pdev->resource[0].flags != IORESOURCE_MEM) || (pdev->resource[1].flags != IORESOURCE_IRQ)) {
+	if ((pdev->resource[0].flags != IORESOURCE_MEM)
+			|| (pdev->resource[1].flags != IORESOURCE_IRQ)) {
 		pr_debug("hcd probe: invalid resource type\n");
 		return -ENODEV;
 	}
 
-	hcd = usb_create_hcd(driver, &pdev->dev, "at91rm9200");
+	hcd = usb_create_hcd(driver, &pdev->dev, "at91");
 	if (!hcd)
 		return -ENOMEM;
 	hcd->rsrc_start = pdev->resource[0].start;
@@ -149,21 +154,23 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *
 /* may be called with controller, bus, and devices active */
 
 /**
- * usb_hcd_at91_remove - shutdown processing for AT91RM9200-based HCDs
+ * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs
  * @dev: USB Host Controller being removed
  * Context: !in_interrupt()
  *
  * Reverses the effect of usb_hcd_at91_probe(), first invoking
  * the HCD's stop() method.  It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
+ * context, "rmmod" or something similar.
  *
  */
-static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pdev)
+static int usb_hcd_at91_remove(struct usb_hcd *hcd,
+				struct platform_device *pdev)
 {
 	usb_remove_hcd(hcd);
 	at91_stop_hc(pdev);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	disable_irq_wake(hcd->irq);
 
 	clk_put(fclk);
 	clk_put(iclk);
@@ -178,19 +185,21 @@ static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pde
 static int __devinit
 ohci_at91_start (struct usb_hcd *hcd)
 {
-//	struct at91_ohci_data	*board = hcd->self.controller->platform_data;
+	struct at91_usbh_data	*board = hcd->self.controller->platform_data;
 	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+	struct usb_device	*root = hcd->self.root_hub;
 	int			ret;
 
 	if ((ret = ohci_init(ohci)) < 0)
 		return ret;
 
+	root->maxchild = board->ports;
+
 	if ((ret = ohci_run(ohci)) < 0) {
 		err("can't start %s", hcd->self.bus_name);
 		ohci_stop(hcd);
 		return ret;
 	}
-//	hcd->self.root_hub->maxchild = board->ports;
 	return 0;
 }
 
@@ -198,7 +207,7 @@ ohci_at91_start (struct usb_hcd *hcd)
 
 static const struct hc_driver ohci_at91_hc_driver = {
 	.description =		hcd_name,
-	.product_desc =		"AT91RM9200 OHCI",
+	.product_desc =		"AT91 OHCI",
 	.hcd_priv_size =	sizeof(struct ohci_hcd),
 
 	/*
@@ -240,33 +249,54 @@ static const struct hc_driver ohci_at91_hc_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-static int ohci_hcd_at91_drv_probe(struct platform_device *dev)
+static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 {
-	return usb_hcd_at91_probe(&ohci_at91_hc_driver, dev);
+	device_init_wakeup(&pdev->dev, 1);
+	return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
 }
 
-static int ohci_hcd_at91_drv_remove(struct platform_device *dev)
+static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
 {
-	return usb_hcd_at91_remove(platform_get_drvdata(dev), dev);
+	device_init_wakeup(&pdev->dev, 0);
+	return usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev);
 }
 
 #ifdef CONFIG_PM
 
-/* REVISIT suspend/resume look "too" simple here */
-
 static int
-ohci_hcd_at91_drv_suspend(struct platform_device *dev, pm_message_t mesg)
+ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
-	clk_disable(fclk);
-	clk_disable(iclk);
+	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(hcd->irq);
+	else
+		disable_irq_wake(hcd->irq);
+
+	/*
+	 * The integrated transceivers seem unable to notice disconnect,
+	 * reconnect, or wakeup without the 48 MHz clock active.  so for
+	 * correctness, always discard connection state (using reset).
+	 *
+	 * REVISIT: some boards will be able to turn VBUS off...
+	 */
+	if (at91_suspend_entering_slow_clock()) {
+		ohci_usb_reset (ohci);
+		clk_disable(fclk);
+		clk_disable(iclk);
+		clocked = 0;
+	}
 
 	return 0;
 }
 
-static int ohci_hcd_at91_drv_resume(struct platform_device *dev)
+static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
 {
-	clk_enable(iclk);
-	clk_enable(fclk);
+	if (!clocked) {
+		clk_enable(iclk);
+		clk_enable(fclk);
+	}
 
 	return 0;
 }
@@ -275,7 +305,7 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *dev)
 #define ohci_hcd_at91_drv_resume  NULL
 #endif
 
-MODULE_ALIAS("at91rm9200-ohci");
+MODULE_ALIAS("at91_ohci");
 
 static struct platform_driver ohci_hcd_at91_driver = {
 	.probe		= ohci_hcd_at91_drv_probe,
@@ -283,7 +313,7 @@ static struct platform_driver ohci_hcd_at91_driver = {
 	.suspend	= ohci_hcd_at91_drv_suspend,
 	.resume		= ohci_hcd_at91_drv_resume,
 	.driver		= {
-		.name	= "at91rm9200-ohci",
+		.name	= "at91_ohci",
 		.owner	= THIS_MODULE,
 	},
 };
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 689261e44018..f7a975d5db09 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -101,9 +101,11 @@ static void au1xxx_start_ohc(struct platform_device *dev)
 
 #endif  /* Au1200 */
 
+#ifndef CONFIG_SOC_AU1200
 	/* wait for reset complete (read register twice; see au1500 errata) */
 	while (au_readl(USB_HOST_CONFIG),
 		!(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
+#endif
 		udelay(1000);
 
 	printk(KERN_DEBUG __FILE__
@@ -157,9 +159,9 @@ static int usb_ohci_au1xxx_probe(const struct hc_driver *driver,
 	/* Au1200 AB USB does not support coherent memory */
 	if (!(read_c0_prid() & 0xff)) {
 		pr_info("%s: this is chip revision AB !!\n",
-			dev->dev.name);
+			dev->name);
 		pr_info("%s: update your board or re-configure the kernel\n",
-			dev->dev.name);
+			dev->name);
 		return -ENODEV;
 	}
 #endif
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
new file mode 100644
index 000000000000..6531c4d26527
--- /dev/null
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -0,0 +1,225 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ *
+ * Bus Glue for ep93xx.
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Russell King et al.
+ *
+ * Modified for LH7A404 from ohci-sa1111.c
+ *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
+ *
+ * Modified for pxa27x from ohci-lh7a404.c
+ *  by Nick Bane <nick@cecomputing.co.uk> 26-8-2004
+ *
+ * Modified for ep93xx from ohci-pxa27x.c
+ *  by Lennert Buytenhek <buytenh@wantstofly.org> 28-2-2006
+ *  Based on an earlier driver by Ray Lehtiniemi
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/signal.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+static struct clk *usb_host_clock;
+
+static void ep93xx_start_hc(struct device *dev)
+{
+	clk_enable(usb_host_clock);
+}
+
+static void ep93xx_stop_hc(struct device *dev)
+{
+	clk_disable(usb_host_clock);
+}
+
+static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
+			 struct platform_device *pdev)
+{
+	int retval;
+	struct usb_hcd *hcd;
+
+	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
+		pr_debug("resource[1] is not IORESOURCE_IRQ");
+		return -ENOMEM;
+	}
+
+	hcd = usb_create_hcd(driver, &pdev->dev, "ep93xx");
+	if (hcd == NULL)
+		return -ENOMEM;
+
+	hcd->rsrc_start = pdev->resource[0].start;
+	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		usb_put_hcd(hcd);
+		retval = -EBUSY;
+		goto err1;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		pr_debug("ioremap failed");
+		retval = -ENOMEM;
+		goto err2;
+	}
+
+	usb_host_clock = clk_get(&pdev->dev, "usb_host");
+	ep93xx_start_hc(&pdev->dev);
+
+	ohci_hcd_init(hcd_to_ohci(hcd));
+
+	retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT);
+	if (retval == 0)
+		return retval;
+
+	ep93xx_stop_hc(&pdev->dev);
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+	usb_put_hcd(hcd);
+
+	return retval;
+}
+
+static void usb_hcd_ep93xx_remove(struct usb_hcd *hcd,
+			struct platform_device *pdev)
+{
+	usb_remove_hcd(hcd);
+	ep93xx_stop_hc(&pdev->dev);
+	clk_put(usb_host_clock);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+}
+
+static int __devinit ohci_ep93xx_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	int ret;
+
+	if ((ret = ohci_init(ohci)) < 0)
+		return ret;
+
+	if ((ret = ohci_run(ohci)) < 0) {
+		err("can't start %s", hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct hc_driver ohci_ep93xx_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "EP93xx OHCI",
+	.hcd_priv_size		= sizeof(struct ohci_hcd),
+	.irq			= ohci_irq,
+	.flags			= HCD_USB11 | HCD_MEMORY,
+	.start			= ohci_ep93xx_start,
+	.stop			= ohci_stop,
+	.urb_enqueue		= ohci_urb_enqueue,
+	.urb_dequeue		= ohci_urb_dequeue,
+	.endpoint_disable	= ohci_endpoint_disable,
+	.get_frame_number	= ohci_get_frame,
+	.hub_status_data	= ohci_hub_status_data,
+	.hub_control		= ohci_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend		= ohci_bus_suspend,
+	.bus_resume		= ohci_bus_resume,
+#endif
+	.start_port_reset	= ohci_start_port_reset,
+};
+
+extern int usb_disabled(void);
+
+static int ohci_hcd_ep93xx_drv_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = -ENODEV;
+	if (!usb_disabled())
+		ret = usb_hcd_ep93xx_probe(&ohci_ep93xx_hc_driver, pdev);
+
+	return ret;
+}
+
+static int ohci_hcd_ep93xx_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_hcd_ep93xx_remove(hcd, pdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ochi_hcd *ohci = hcd_to_ohci(hcd);
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ep93xx_stop_hc(&pdev->dev);
+	hcd->state = HC_STATE_SUSPENDED;
+	pdev->dev.power.power_state = PMSG_SUSPEND;
+
+	return 0;
+}
+
+static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	int status;
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ep93xx_start_hc(&pdev->dev);
+	pdev->dev.power.power_state = PMSG_ON;
+	usb_hcd_resume_root_hub(hcd);
+
+	return 0;
+}
+#endif
+
+
+static struct platform_driver ohci_hcd_ep93xx_driver = {
+	.probe		= ohci_hcd_ep93xx_drv_probe,
+	.remove		= ohci_hcd_ep93xx_drv_remove,
+#ifdef CONFIG_PM
+	.suspend	= ohci_hcd_ep93xx_drv_suspend,
+	.resume		= ohci_hcd_ep93xx_drv_resume,
+#endif
+	.driver		= {
+		.name	= "ep93xx-ohci",
+	},
+};
+
+static int __init ohci_hcd_ep93xx_init(void)
+{
+	return platform_driver_register(&ohci_hcd_ep93xx_driver);
+}
+
+static void __exit ohci_hcd_ep93xx_cleanup(void)
+{
+	platform_driver_unregister(&ohci_hcd_ep93xx_driver);
+}
+
+module_init(ohci_hcd_ep93xx_init);
+module_exit(ohci_hcd_ep93xx_cleanup);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 8fb842ed5f6e..94d8cf4b36c1 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -901,6 +901,10 @@ MODULE_LICENSE ("GPL");
 #include "ohci-pxa27x.c"
 #endif
 
+#ifdef CONFIG_ARCH_EP93XX
+#include "ohci-ep93xx.c"
+#endif
+
 #ifdef CONFIG_SOC_AU1X00
 #include "ohci-au1xxx.c"
 #endif
@@ -909,7 +913,7 @@ MODULE_LICENSE ("GPL");
 #include "ohci-ppc-soc.c"
 #endif
 
-#ifdef CONFIG_ARCH_AT91RM9200
+#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261)
 #include "ohci-at91.c"
 #endif
 
@@ -919,9 +923,11 @@ MODULE_LICENSE ("GPL");
       || defined(CONFIG_ARCH_OMAP) \
       || defined (CONFIG_ARCH_LH7A404) \
       || defined (CONFIG_PXA27x) \
+      || defined (CONFIG_ARCH_EP93XX) \
       || defined (CONFIG_SOC_AU1X00) \
       || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
       || defined (CONFIG_ARCH_AT91RM9200) \
+      || defined (CONFIG_ARCH_AT91SAM9261) \
 	)
 #error "missing bus glue for ohci-hcd"
 #endif
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 0bb972b58336..5b0a23fd798b 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -581,14 +581,14 @@ static int ohci_hub_control (
 		break;
 	case GetHubStatus:
 		temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE);
-		*(__le32 *) buf = cpu_to_le32 (temp);
+		put_unaligned(cpu_to_le32 (temp), (__le32 *) buf);
 		break;
 	case GetPortStatus:
 		if (!wIndex || wIndex > ports)
 			goto error;
 		wIndex--;
 		temp = roothub_portstatus (ohci, wIndex);
-		*(__le32 *) buf = cpu_to_le32 (temp);
+		put_unaligned(cpu_to_le32 (temp), (__le32 *) buf);
 
 #ifndef	OHCI_VERBOSE_DEBUG
 	if (*(u16*)(buf+2))	/* only if wPortChange is interesting */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index dff60568b4a1..20861650905e 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -167,8 +167,6 @@ static int __devinit mmio_resource_enabled(struct pci_dev *pdev, int idx)
 static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 {
 	void __iomem *base;
-	int wait_time;
-	u32 control;
 
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
@@ -179,9 +177,10 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 
 /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
 #ifndef __hppa__
-	control = readl(base + OHCI_CONTROL);
+{
+	u32 control = readl(base + OHCI_CONTROL);
 	if (control & OHCI_CTRL_IR) {
-		wait_time = 500; /* arbitrary; 5 seconds */
+		int wait_time = 500; /* arbitrary; 5 seconds */
 		writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
 		writel(OHCI_OCR, base + OHCI_CMDSTATUS);
 		while (wait_time > 0 &&
@@ -198,6 +197,7 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 		/* reset controller, preserving RWC */
 		writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL);
 	}
+}
 #endif
 
 	/*
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index c9d72ac0a1d7..431e8f31f1a9 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -372,7 +372,7 @@ static void uhci_fixup_toggles(struct uhci_qh *qh, int skip_first)
 		 * need to change any toggles in this URB */
 		td = list_entry(urbp->td_list.next, struct uhci_td, list);
 		if (toggle > 1 || uhci_toggle(td_token(td)) == toggle) {
-			td = list_entry(urbp->td_list.next, struct uhci_td,
+			td = list_entry(urbp->td_list.prev, struct uhci_td,
 					list);
 			toggle = uhci_toggle(td_token(td)) ^ 1;
 
@@ -943,7 +943,9 @@ static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb)
 			/* We received a short packet */
 			if (urb->transfer_flags & URB_SHORT_NOT_OK)
 				ret = -EREMOTEIO;
-			else if (ctrlstat & TD_CTRL_SPD)
+
+			/* Fixup needed only if this isn't the URB's last TD */
+			else if (&td->list != urbp->td_list.prev)
 				ret = 1;
 		}
 
@@ -1346,7 +1348,7 @@ static void uhci_scan_qh(struct uhci_hcd *uhci, struct uhci_qh *qh,
 		}
 
 		uhci_giveback_urb(uhci, qh, urb, regs);
-		if (status < 0)
+		if (status < 0 && qh->type != USB_ENDPOINT_XFER_ISOC)
 			break;
 	}
 
diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c
index 9e3f13903371..044faa07e297 100644
--- a/drivers/usb/input/appletouch.c
+++ b/drivers/usb/input/appletouch.c
@@ -597,9 +597,9 @@ static void atp_disconnect(struct usb_interface *iface)
 	if (dev) {
 		usb_kill_urb(dev->urb);
 		input_unregister_device(dev->input);
-		usb_free_urb(dev->urb);
 		usb_buffer_free(dev->udev, dev->datalen,
 				dev->data, dev->urb->transfer_dma);
+		usb_free_urb(dev->urb);
 		kfree(dev);
 	}
 	printk(KERN_INFO "input: appletouch disconnected\n");
diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c
index 05d2d6012eb2..3719fcb04b8f 100644
--- a/drivers/usb/input/ati_remote.c
+++ b/drivers/usb/input/ati_remote.c
@@ -111,14 +111,28 @@
 #define NAME_BUFSIZE      80    /* size of product name, path buffers */
 #define DATA_BUFSIZE      63    /* size of URB data buffers */
 
+/*
+ * Duplicate event filtering time.
+ * Sequential, identical KIND_FILTERED inputs with less than
+ * FILTER_TIME milliseconds between them are considered as repeat
+ * events. The hardware generates 5 events for the first keypress
+ * and we have to take this into account for an accurate repeat
+ * behaviour.
+ */
+#define FILTER_TIME	60 /* msec */
+
 static unsigned long channel_mask;
-module_param(channel_mask, ulong, 0444);
+module_param(channel_mask, ulong, 0644);
 MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore");
 
 static int debug;
-module_param(debug, int, 0444);
+module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
 
+static int repeat_filter = FILTER_TIME;
+module_param(repeat_filter, int, 0644);
+MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec");
+
 #define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
 #undef err
 #define err(format, arg...) printk(KERN_ERR format , ## arg)
@@ -143,19 +157,6 @@ MODULE_DEVICE_TABLE(usb, ati_remote_table);
 static char init1[] = { 0x01, 0x00, 0x20, 0x14 };
 static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 };
 
-/* Acceleration curve for directional control pad */
-static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
-
-/* Duplicate event filtering time.
- * Sequential, identical KIND_FILTERED inputs with less than
- * FILTER_TIME jiffies between them are considered as repeat
- * events. The hardware generates 5 events for the first keypress
- * and we have to take this into account for an accurate repeat
- * behaviour.
- * (HZ / 20) == 50 ms and works well for me.
- */
-#define FILTER_TIME (HZ / 20)
-
 struct ati_remote {
 	struct input_dev *idev;
 	struct usb_device *udev;
@@ -413,6 +414,43 @@ static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
 }
 
 /*
+ *	ati_remote_compute_accel
+ *
+ * Implements acceleration curve for directional control pad
+ * If elapsed time since last event is > 1/4 second, user "stopped",
+ * so reset acceleration. Otherwise, user is probably holding the control
+ * pad down, so we increase acceleration, ramping up over two seconds to
+ * a maximum speed.
+ */
+static int ati_remote_compute_accel(struct ati_remote *ati_remote)
+{
+	static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
+	unsigned long now = jiffies;
+	int acc;
+
+	if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) {
+		acc = 1;
+		ati_remote->acc_jiffies = now;
+	}
+	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125)))
+		acc = accel[0];
+	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250)))
+		acc = accel[1];
+	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500)))
+		acc = accel[2];
+	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000)))
+		acc = accel[3];
+	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500)))
+		acc = accel[4];
+	else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000)))
+		acc = accel[5];
+	else
+		acc = accel[6];
+
+	return acc;
+}
+
+/*
  *	ati_remote_report_input
  */
 static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs)
@@ -465,9 +503,9 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs)
 
 	if (ati_remote_tbl[index].kind == KIND_FILTERED) {
 		/* Filter duplicate events which happen "too close" together. */
-		if ((ati_remote->old_data[0] == data[1]) &&
-			(ati_remote->old_data[1] == data[2]) &&
-			time_before(jiffies, ati_remote->old_jiffies + FILTER_TIME)) {
+		if (ati_remote->old_data[0] == data[1] &&
+		    ati_remote->old_data[1] == data[2] &&
+		    time_before(jiffies, ati_remote->old_jiffies + msecs_to_jiffies(repeat_filter))) {
 			ati_remote->repeat_count++;
 		} else {
 			ati_remote->repeat_count = 0;
@@ -477,75 +515,61 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs)
 		ati_remote->old_data[1] = data[2];
 		ati_remote->old_jiffies = jiffies;
 
-		if ((ati_remote->repeat_count > 0)
-		    && (ati_remote->repeat_count < 5))
+		if (ati_remote->repeat_count > 0 &&
+		    ati_remote->repeat_count < 5)
 			return;
 
 
 		input_regs(dev, regs);
 		input_event(dev, ati_remote_tbl[index].type,
 			ati_remote_tbl[index].code, 1);
+		input_sync(dev);
 		input_event(dev, ati_remote_tbl[index].type,
 			ati_remote_tbl[index].code, 0);
 		input_sync(dev);
 
-		return;
-	}
+	} else {
 
-	/*
-	 * Other event kinds are from the directional control pad, and have an
-	 * acceleration factor applied to them.  Without this acceleration, the
-	 * control pad is mostly unusable.
-	 *
-	 * If elapsed time since last event is > 1/4 second, user "stopped",
-	 * so reset acceleration. Otherwise, user is probably holding the control
-	 * pad down, so we increase acceleration, ramping up over two seconds to
-	 * a maximum speed.  The acceleration curve is #defined above.
-	 */
-	if (time_after(jiffies, ati_remote->old_jiffies + (HZ >> 2))) {
-		acc = 1;
-		ati_remote->acc_jiffies = jiffies;
-	}
-	else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 3)))  acc = accel[0];
-	else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 2)))  acc = accel[1];
-	else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 1)))  acc = accel[2];
-	else if (time_before(jiffies, ati_remote->acc_jiffies + HZ))         acc = accel[3];
-	else if (time_before(jiffies, ati_remote->acc_jiffies + HZ+(HZ>>1))) acc = accel[4];
-	else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ << 1)))  acc = accel[5];
-	else acc = accel[6];
-
-	input_regs(dev, regs);
-	switch (ati_remote_tbl[index].kind) {
-	case KIND_ACCEL:
-		input_event(dev, ati_remote_tbl[index].type,
-			ati_remote_tbl[index].code,
-			ati_remote_tbl[index].value * acc);
-		break;
-	case KIND_LU:
-		input_report_rel(dev, REL_X, -acc);
-		input_report_rel(dev, REL_Y, -acc);
-		break;
-	case KIND_RU:
-		input_report_rel(dev, REL_X, acc);
-		input_report_rel(dev, REL_Y, -acc);
-		break;
-	case KIND_LD:
-		input_report_rel(dev, REL_X, -acc);
-		input_report_rel(dev, REL_Y, acc);
-		break;
-	case KIND_RD:
-		input_report_rel(dev, REL_X, acc);
-		input_report_rel(dev, REL_Y, acc);
-		break;
-	default:
-		dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n",
-			ati_remote_tbl[index].kind);
-	}
-	input_sync(dev);
+		/*
+		 * Other event kinds are from the directional control pad, and have an
+		 * acceleration factor applied to them.  Without this acceleration, the
+		 * control pad is mostly unusable.
+		 */
+		acc = ati_remote_compute_accel(ati_remote);
+
+		input_regs(dev, regs);
+		switch (ati_remote_tbl[index].kind) {
+		case KIND_ACCEL:
+			input_event(dev, ati_remote_tbl[index].type,
+				ati_remote_tbl[index].code,
+				ati_remote_tbl[index].value * acc);
+			break;
+		case KIND_LU:
+			input_report_rel(dev, REL_X, -acc);
+			input_report_rel(dev, REL_Y, -acc);
+			break;
+		case KIND_RU:
+			input_report_rel(dev, REL_X, acc);
+			input_report_rel(dev, REL_Y, -acc);
+			break;
+		case KIND_LD:
+			input_report_rel(dev, REL_X, -acc);
+			input_report_rel(dev, REL_Y, acc);
+			break;
+		case KIND_RD:
+			input_report_rel(dev, REL_X, acc);
+			input_report_rel(dev, REL_Y, acc);
+			break;
+		default:
+			dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n",
+				ati_remote_tbl[index].kind);
+		}
+		input_sync(dev);
 
-	ati_remote->old_jiffies = jiffies;
-	ati_remote->old_data[0] = data[1];
-	ati_remote->old_data[1] = data[2];
+		ati_remote->old_jiffies = jiffies;
+		ati_remote->old_data[0] = data[1];
+		ati_remote->old_data[1] = data[2];
+	}
 }
 
 /*
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index e3cd0321c59c..bfa267722f1b 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1410,17 +1410,54 @@ void hid_init_reports(struct hid_device *hid)
 		warn("timeout initializing reports");
 }
 
+#define USB_VENDOR_ID_GTCO		0x078c
+#define USB_DEVICE_ID_GTCO_90		0x0090
+#define USB_DEVICE_ID_GTCO_100		0x0100
+#define USB_DEVICE_ID_GTCO_101		0x0101
+#define USB_DEVICE_ID_GTCO_103		0x0103
+#define USB_DEVICE_ID_GTCO_104		0x0104
+#define USB_DEVICE_ID_GTCO_105		0x0105
+#define USB_DEVICE_ID_GTCO_106		0x0106
+#define USB_DEVICE_ID_GTCO_107		0x0107
+#define USB_DEVICE_ID_GTCO_108		0x0108
+#define USB_DEVICE_ID_GTCO_200		0x0200
+#define USB_DEVICE_ID_GTCO_201		0x0201
+#define USB_DEVICE_ID_GTCO_202		0x0202
+#define USB_DEVICE_ID_GTCO_203		0x0203
+#define USB_DEVICE_ID_GTCO_204		0x0204
+#define USB_DEVICE_ID_GTCO_205		0x0205
+#define USB_DEVICE_ID_GTCO_206		0x0206
+#define USB_DEVICE_ID_GTCO_207		0x0207
+#define USB_DEVICE_ID_GTCO_300		0x0300
+#define USB_DEVICE_ID_GTCO_301		0x0301
+#define USB_DEVICE_ID_GTCO_302		0x0302
+#define USB_DEVICE_ID_GTCO_303		0x0303
+#define USB_DEVICE_ID_GTCO_304		0x0304
+#define USB_DEVICE_ID_GTCO_305		0x0305
+#define USB_DEVICE_ID_GTCO_306		0x0306
+#define USB_DEVICE_ID_GTCO_307		0x0307
+#define USB_DEVICE_ID_GTCO_308		0x0308
+#define USB_DEVICE_ID_GTCO_309		0x0309
+#define USB_DEVICE_ID_GTCO_400		0x0400
+#define USB_DEVICE_ID_GTCO_401		0x0401
+#define USB_DEVICE_ID_GTCO_402		0x0402
+#define USB_DEVICE_ID_GTCO_403		0x0403
+#define USB_DEVICE_ID_GTCO_404		0x0404
+#define USB_DEVICE_ID_GTCO_405		0x0405
+#define USB_DEVICE_ID_GTCO_500		0x0500
+#define USB_DEVICE_ID_GTCO_501		0x0501
+#define USB_DEVICE_ID_GTCO_502		0x0502
+#define USB_DEVICE_ID_GTCO_503		0x0503
+#define USB_DEVICE_ID_GTCO_504		0x0504
+#define USB_DEVICE_ID_GTCO_1000		0x1000
+#define USB_DEVICE_ID_GTCO_1001		0x1001
+#define USB_DEVICE_ID_GTCO_1002		0x1002
+#define USB_DEVICE_ID_GTCO_1003		0x1003
+#define USB_DEVICE_ID_GTCO_1004		0x1004
+#define USB_DEVICE_ID_GTCO_1005		0x1005
+#define USB_DEVICE_ID_GTCO_1006		0x1006
+
 #define USB_VENDOR_ID_WACOM		0x056a
-#define USB_DEVICE_ID_WACOM_PENPARTNER	0x0000
-#define USB_DEVICE_ID_WACOM_GRAPHIRE	0x0010
-#define USB_DEVICE_ID_WACOM_INTUOS	0x0020
-#define USB_DEVICE_ID_WACOM_PL		0x0030
-#define USB_DEVICE_ID_WACOM_INTUOS2	0x0040
-#define USB_DEVICE_ID_WACOM_VOLITO	0x0060
-#define USB_DEVICE_ID_WACOM_PTU		0x0003
-#define USB_DEVICE_ID_WACOM_INTUOS3	0x00B0
-#define USB_DEVICE_ID_WACOM_CINTIQ	0x003F
-#define USB_DEVICE_ID_WACOM_DTF         0x00C0
 
 #define USB_VENDOR_ID_ACECAD		0x0460
 #define USB_DEVICE_ID_ACECAD_FLAIR	0x0004
@@ -1506,6 +1543,9 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_DEVICE_ID_4_PHIDGETSERVO_20	0x8104
 #define USB_DEVICE_ID_DUAL_USB_JOYPAD   0x8866
 
+#define USB_VENDOR_ID_WISEGROUP_LTD	0x6677
+#define USB_DEVICE_ID_SMARTJOY_DUAL_PLUS 0x8802
+
 #define USB_VENDOR_ID_CODEMERCS		0x07c0
 #define USB_DEVICE_ID_CODEMERCS_IOW40	0x1500
 #define USB_DEVICE_ID_CODEMERCS_IOW24	0x1501
@@ -1584,6 +1624,51 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_8_IF_KIT, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_90, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_100, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_101, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_103, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_104, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_105, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_106, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_107, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_108, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_200, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_201, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_202, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_203, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_204, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_205, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_206, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_207, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_300, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_301, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_302, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_303, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_304, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_305, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_306, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_307, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_308, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_309, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_400, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_401, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_402, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_403, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_405, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_500, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_501, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_502, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_503, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_504, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1000, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1001, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1002, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1003, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1004, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1005, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE },
@@ -1613,49 +1698,6 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PENPARTNER, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 1, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 2, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 3, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 4, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 1, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 2, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 3, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 4, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 1, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 2, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 3, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 4, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 5, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 7, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 8, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 9, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 1, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 2, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 3, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 4, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 5, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 1, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 2, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 3, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 4, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 5, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 6, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 3, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 4, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 5, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF + 3, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K, HID_QUIRK_IGNORE },
@@ -1669,6 +1711,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
 
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL },
 	{ USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
@@ -1773,6 +1816,10 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
 	char *rdesc;
 	int n, len, insize = 0;
 
+        /* Ignore all Wacom devices */
+        if (dev->descriptor.idVendor == USB_VENDOR_ID_WACOM)
+                return NULL;
+
 	for (n = 0; hid_blacklist[n].idVendor; n++)
 		if ((hid_blacklist[n].idVendor == le16_to_cpu(dev->descriptor.idVendor)) &&
 			(hid_blacklist[n].idProduct == le16_to_cpu(dev->descriptor.idProduct)))
diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c
index 3b175aa482cd..a338bf4c2d78 100644
--- a/drivers/usb/input/usbtouchscreen.c
+++ b/drivers/usb/input/usbtouchscreen.c
@@ -286,7 +286,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
 static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
 {
 	*x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
-	*x = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
+	*y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
 	*press = ((pkt[2] & 0x1F) << 7) | (pkt[5] & 0x7F);
 	*touch = ~pkt[7] & 0x20;
 
diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c
index 575a4e672e96..7b45fd3de911 100644
--- a/drivers/usb/input/yealink.c
+++ b/drivers/usb/input/yealink.c
@@ -810,12 +810,9 @@ static int usb_cleanup(struct yealink_dev *yld, int err)
 	if (yld == NULL)
 		return err;
 
-        if (yld->urb_irq) {
-		usb_kill_urb(yld->urb_irq);
-		usb_free_urb(yld->urb_irq);
-	}
-        if (yld->urb_ctl)
-		usb_free_urb(yld->urb_ctl);
+	usb_kill_urb(yld->urb_irq);	/* parameter validation in core/urb */
+	usb_kill_urb(yld->urb_ctl);	/* parameter validation in core/urb */
+
         if (yld->idev) {
 		if (err)
 			input_free_device(yld->idev);
@@ -831,6 +828,9 @@ static int usb_cleanup(struct yealink_dev *yld, int err)
 	if (yld->irq_data)
 		usb_buffer_free(yld->udev, USB_PKT_LEN,
 				yld->irq_data, yld->irq_dma);
+
+	usb_free_urb(yld->urb_irq);	/* parameter validation in core/urb */
+	usb_free_urb(yld->urb_ctl);	/* parameter validation in core/urb */
 	kfree(yld);
 	return err;
 }
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index daa486dde8cf..88928a4be805 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -88,19 +88,19 @@ config USB_LED
 	  To compile this driver as a module, choose M here: the
 	  module will be called usbled.
 
-config USB_CY7C63
+config USB_CYPRESS_CY7C63
 	tristate "Cypress CY7C63xxx USB driver support"
 	depends on USB
 	help
 	  Say Y here if you want to connect a Cypress CY7C63xxx
-	  micro controller to your computer's USB port. This driver
-	  supports the pre-programmed devices (incl. firmware) by
-	  AK Modul-Bus Computer GmbH.
+	  micro controller to your computer's USB port. Currently this
+	  driver supports the pre-programmed devices (incl. firmware)
+	  by AK Modul-Bus Computer GmbH.
 
 	  Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called cy7c63.
+	  module will be called cypress_cy7c63.
 
 config USB_CYTHERM
 	tristate "Cypress USB thermometer driver support"
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index f25a97227297..2927260c5812 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -4,7 +4,7 @@
 #
 
 obj-$(CONFIG_USB_AUERSWALD)	+= auerswald.o
-obj-$(CONFIG_USB_CY7C63)	+= cy7c63.o
+obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
 obj-$(CONFIG_USB_CYTHERM)	+= cytherm.o
 obj-$(CONFIG_USB_EMI26)		+= emi26.o
 obj-$(CONFIG_USB_EMI62)		+= emi62.o
diff --git a/drivers/usb/misc/cy7c63.c b/drivers/usb/misc/cy7c63.c
deleted file mode 100644
index 8a1c10b89b76..000000000000
--- a/drivers/usb/misc/cy7c63.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
-* cy7c63.c
-*
-* Copyright (c) 2006 Oliver Bock (bock@fh-wolfenbuettel.de)
-*
-*	This driver is based on the Cypress Thermometer USB Driver by
-*	Marcus Maul and the 2.0 version of Greg Kroah-Hartman's
-*	USB Skeleton driver.
-*
-*	Is is a generic driver for the Cypress CY7C63000 family.
-*	For the time being it enables you to toggle the single I/O ports
-*	of the device.
-*
-*	Supported vendors:	AK Modul-Bus Computer GmbH
-*	Supported devices:	CY7C63001A-PC (to be continued...)
-*	Supported functions:	Read/Write Ports (to be continued...)
-*
-*	Chipsets families:	CY7C63000, CY7C63001, CY7C63100, CY7C63101
-*
-*
-*	This program is free software; you can redistribute it and/or
-*	modify it under the terms of the GNU General Public License as
-*	published by the Free Software Foundation, version 2.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/usb.h>
-
-#define DRIVER_AUTHOR		"Oliver Bock (bock@fh-wolfenbuettel.de)"
-#define DRIVER_DESC		"Cypress CY7C63xxx USB driver"
-
-#define CY7C63_VENDOR_ID	0xa2c
-#define CY7C63_PRODUCT_ID	0x8
-
-#define CY7C63_READ_PORT	0x4
-#define CY7C63_WRITE_PORT	0x5
-#define CY7C63_READ_RAM		0x2
-#define CY7C63_WRITE_RAM	0x3
-#define CY7C63_READ_ROM		0x1
-
-#define CY7C63_READ_PORT_ID0	0
-#define CY7C63_WRITE_PORT_ID0	0
-#define CY7C63_READ_PORT_ID1	0x2
-#define CY7C63_WRITE_PORT_ID1	1
-
-#define CY7C63_MAX_REQSIZE	8
-
-
-/* table of devices that work with this driver */
-static struct usb_device_id cy7c63_table [] = {
-	{ USB_DEVICE(CY7C63_VENDOR_ID, CY7C63_PRODUCT_ID) },
-	{ }
-};
-MODULE_DEVICE_TABLE(usb, cy7c63_table);
-
-/* structure to hold all of our device specific stuff */
-struct cy7c63 {
-	struct usb_device *	udev;
-	char 			port0;
-	char			port1;
-};
-
-/* used to send usb control messages to device */
-int vendor_command(struct cy7c63 *dev, unsigned char request,
-			 unsigned char address, unsigned char data) {
-
-	int retval = 0;
-	unsigned int pipe;
-	unsigned char *iobuf;
-
-	/* allocate some memory for the i/o buffer*/
-	iobuf = kzalloc(CY7C63_MAX_REQSIZE, GFP_KERNEL);
-	if (!iobuf) {
-		dev_err(&dev->udev->dev, "Out of memory!\n");
-		retval = -ENOMEM;
-		goto error;
-	}
-
-	dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data);
-
-	/* prepare usb control message and send it upstream */
-	pipe = usb_rcvctrlpipe(dev->udev, 0);
-	retval = usb_control_msg(dev->udev, pipe, request,
-				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
-				address, data, iobuf, CY7C63_MAX_REQSIZE,
-				USB_CTRL_GET_TIMEOUT);
-
-	/* store returned data (more READs to be added!) */
-	switch (request) {
-		case CY7C63_READ_PORT:
-			if (address == CY7C63_READ_PORT_ID0) {
-				dev->port0 = iobuf[1];
-				dev_dbg(&dev->udev->dev,
-					"READ_PORT0 returned: %d\n",dev->port0);
-			}
-			else if (address == CY7C63_READ_PORT_ID1) {
-				dev->port1 = iobuf[1];
-				dev_dbg(&dev->udev->dev,
-					"READ_PORT1 returned: %d\n",dev->port1);
-			}
-			break;
-	}
-
-	kfree(iobuf);
-error:
-	return retval;
-}
-
-#define get_set_port(num,read_id,write_id) \
-static ssize_t set_port##num(struct device *dev, struct device_attribute *attr,	\
-					const char *buf, size_t count) {	\
-										\
-	int value;								\
-	int result = 0;								\
-										\
-	struct usb_interface *intf = to_usb_interface(dev);			\
-	struct cy7c63 *cyp = usb_get_intfdata(intf);				\
-										\
-	dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", num);			\
-										\
-	/* validate input data */						\
-	if (sscanf(buf, "%d", &value) < 1) {					\
-		result = -EINVAL;						\
-		goto error;							\
-	}									\
-	if (value>255 || value<0) {						\
-		result = -EINVAL;						\
-		goto error;							\
-	}									\
-										\
-	result = vendor_command(cyp, CY7C63_WRITE_PORT, write_id,		\
-					 (unsigned char)value);			\
-										\
-	dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n",result);	\
-error:										\
-	return result < 0 ? result : count;					\
-}										\
-										\
-static ssize_t get_port##num(struct device *dev,				\
-				 struct device_attribute *attr, char *buf) {	\
-										\
-	int result = 0;								\
-										\
-	struct usb_interface *intf = to_usb_interface(dev);			\
-	struct cy7c63 *cyp = usb_get_intfdata(intf);				\
-										\
-	dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", num);			\
-										\
-	result = vendor_command(cyp, CY7C63_READ_PORT, read_id, 0);		\
-										\
-	dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);	\
-										\
-	return sprintf(buf, "%d", cyp->port##num);				\
-}										\
-static DEVICE_ATTR(port##num, S_IWUGO | S_IRUGO, get_port##num, set_port##num);
-
-get_set_port(0, CY7C63_READ_PORT_ID0, CY7C63_WRITE_PORT_ID0);
-get_set_port(1, CY7C63_READ_PORT_ID1, CY7C63_WRITE_PORT_ID1);
-
-static int cy7c63_probe(struct usb_interface *interface,
-			const struct usb_device_id *id) {
-
-	struct cy7c63 *dev = NULL;
-	int retval = -ENOMEM;
-
-	/* allocate memory for our device state and initialize it */
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (dev == NULL) {
-		dev_err(&dev->udev->dev, "Out of memory!\n");
-		goto error;
-	}
-
-	dev->udev = usb_get_dev(interface_to_usbdev(interface));
-
-	/* save our data pointer in this interface device */
-	usb_set_intfdata(interface, dev);
-
-	/* create device attribute files */
-	device_create_file(&interface->dev, &dev_attr_port0);
-	device_create_file(&interface->dev, &dev_attr_port1);
-
-	/* let the user know what node this device is now attached to */
-	dev_info(&interface->dev,
-		"Cypress CY7C63xxx device now attached\n");
-
-	retval = 0;
-error:
-	return retval;
-}
-
-static void cy7c63_disconnect(struct usb_interface *interface) {
-
-	struct cy7c63 *dev;
-
-	dev = usb_get_intfdata(interface);
-	usb_set_intfdata(interface, NULL);
-
-	/* remove device attribute files */
-	device_remove_file(&interface->dev, &dev_attr_port0);
-	device_remove_file(&interface->dev, &dev_attr_port1);
-
-	usb_put_dev(dev->udev);
-
-	dev_info(&interface->dev,
-		"Cypress CY7C63xxx device now disconnected\n");
-
-	kfree(dev);
-}
-
-static struct usb_driver cy7c63_driver = {
-	.name = "cy7c63",
-	.probe = cy7c63_probe,
-	.disconnect = cy7c63_disconnect,
-	.id_table = cy7c63_table,
-};
-
-static int __init cy7c63_init(void) {
-
-	int result;
-
-	/* register this driver with the USB subsystem */
-	result = usb_register(&cy7c63_driver);
-	if (result) {
-		err("Function usb_register failed! Error number: %d\n", result);
-	}
-
-	return result;
-}
-
-static void __exit cy7c63_exit(void) {
-
-	/* deregister this driver with the USB subsystem */
-	usb_deregister(&cy7c63_driver);
-}
-
-module_init(cy7c63_init);
-module_exit(cy7c63_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
new file mode 100644
index 000000000000..9c46746d5d00
--- /dev/null
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -0,0 +1,284 @@
+/*
+* cypress_cy7c63.c
+*
+* Copyright (c) 2006 Oliver Bock (o.bock@fh-wolfenbuettel.de)
+*
+*	This driver is based on the Cypress USB Driver by Marcus Maul
+*	(cyport) and the 2.0 version of Greg Kroah-Hartman's
+*	USB Skeleton driver.
+*
+*	This is a generic driver for the Cypress CY7C63xxx family.
+*	For the time being it enables you to read from and write to
+*	the single I/O ports of the device.
+*
+*	Supported vendors:	AK Modul-Bus Computer GmbH
+*				(Firmware "Port-Chip")
+*
+*	Supported devices:	CY7C63001A-PC
+*				CY7C63001C-PXC
+*				CY7C63001C-SXC
+*
+*	Supported functions:	Read/Write Ports
+*
+*
+*	This program is free software; you can redistribute it and/or
+*	modify it under the terms of the GNU General Public License as
+*	published by the Free Software Foundation, version 2.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+
+#define DRIVER_AUTHOR		"Oliver Bock (o.bock@fh-wolfenbuettel.de)"
+#define DRIVER_DESC		"Cypress CY7C63xxx USB driver"
+
+#define CYPRESS_VENDOR_ID	0xa2c
+#define CYPRESS_PRODUCT_ID	0x8
+
+#define CYPRESS_READ_PORT	0x4
+#define CYPRESS_WRITE_PORT	0x5
+
+#define CYPRESS_READ_RAM	0x2
+#define CYPRESS_WRITE_RAM	0x3
+#define CYPRESS_READ_ROM	0x1
+
+#define CYPRESS_READ_PORT_ID0	0
+#define CYPRESS_WRITE_PORT_ID0	0
+#define CYPRESS_READ_PORT_ID1	0x2
+#define CYPRESS_WRITE_PORT_ID1	1
+
+#define CYPRESS_MAX_REQSIZE	8
+
+
+/* table of devices that work with this driver */
+static struct usb_device_id cypress_table [] = {
+	{ USB_DEVICE(CYPRESS_VENDOR_ID, CYPRESS_PRODUCT_ID) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, cypress_table);
+
+/* structure to hold all of our device specific stuff */
+struct cypress {
+	struct usb_device *	udev;
+	unsigned char		port[2];
+};
+
+/* used to send usb control messages to device */
+static int vendor_command(struct cypress *dev, unsigned char request,
+			  unsigned char address, unsigned char data)
+{
+	int retval = 0;
+	unsigned int pipe;
+	unsigned char *iobuf;
+
+	/* allocate some memory for the i/o buffer*/
+	iobuf = kzalloc(CYPRESS_MAX_REQSIZE, GFP_KERNEL);
+	if (!iobuf) {
+		dev_err(&dev->udev->dev, "Out of memory!\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data);
+
+	/* prepare usb control message and send it upstream */
+	pipe = usb_rcvctrlpipe(dev->udev, 0);
+	retval = usb_control_msg(dev->udev, pipe, request,
+				 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+				 address, data, iobuf, CYPRESS_MAX_REQSIZE,
+				 USB_CTRL_GET_TIMEOUT);
+
+	/* store returned data (more READs to be added) */
+	switch (request) {
+		case CYPRESS_READ_PORT:
+			if (address == CYPRESS_READ_PORT_ID0) {
+				dev->port[0] = iobuf[1];
+				dev_dbg(&dev->udev->dev,
+					"READ_PORT0 returned: %d\n",
+					dev->port[0]);
+			}
+			else if (address == CYPRESS_READ_PORT_ID1) {
+				dev->port[1] = iobuf[1];
+				dev_dbg(&dev->udev->dev,
+					"READ_PORT1 returned: %d\n",
+					dev->port[1]);
+			}
+			break;
+	}
+
+	kfree(iobuf);
+error:
+	return retval;
+}
+
+/* write port value */
+static ssize_t write_port(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count,
+			  int port_num, int write_id)
+{
+	int value = -1;
+	int result = 0;
+
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct cypress *cyp = usb_get_intfdata(intf);
+
+	dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", port_num);
+
+	/* validate input data */
+	if (sscanf(buf, "%d", &value) < 1) {
+		result = -EINVAL;
+		goto error;
+	}
+	if (value < 0 || value > 255) {
+		result = -EINVAL;
+		goto error;
+	}
+
+	result = vendor_command(cyp, CYPRESS_WRITE_PORT, write_id,
+				(unsigned char)value);
+
+	dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
+error:
+	return result < 0 ? result : count;
+}
+
+/* attribute callback handler (write) */
+static ssize_t set_port0_handler(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	return write_port(dev, attr, buf, count, 0, CYPRESS_WRITE_PORT_ID0);
+}
+
+/* attribute callback handler (write) */
+static ssize_t set_port1_handler(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	return write_port(dev, attr, buf, count, 1, CYPRESS_WRITE_PORT_ID1);
+}
+
+/* read port value */
+static ssize_t read_port(struct device *dev, struct device_attribute *attr,
+			 char *buf, int port_num, int read_id)
+{
+	int result = 0;
+
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct cypress *cyp = usb_get_intfdata(intf);
+
+	dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", port_num);
+
+	result = vendor_command(cyp, CYPRESS_READ_PORT, read_id, 0);
+
+	dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
+
+	return sprintf(buf, "%d", cyp->port[port_num]);
+}
+
+/* attribute callback handler (read) */
+static ssize_t get_port0_handler(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	return read_port(dev, attr, buf, 0, CYPRESS_READ_PORT_ID0);
+}
+
+/* attribute callback handler (read) */
+static ssize_t get_port1_handler(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
+}
+
+static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO,
+		   get_port0_handler, set_port0_handler);
+
+static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO,
+		   get_port1_handler, set_port1_handler);
+
+
+static int cypress_probe(struct usb_interface *interface,
+			 const struct usb_device_id *id)
+{
+	struct cypress *dev = NULL;
+	int retval = -ENOMEM;
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL) {
+		dev_err(&interface->dev, "Out of memory!\n");
+		goto error;
+	}
+
+	dev->udev = usb_get_dev(interface_to_usbdev(interface));
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, dev);
+
+	/* create device attribute files */
+	device_create_file(&interface->dev, &dev_attr_port0);
+	device_create_file(&interface->dev, &dev_attr_port1);
+
+	/* let the user know that the device is now attached */
+	dev_info(&interface->dev,
+		 "Cypress CY7C63xxx device now attached\n");
+
+	retval = 0;
+error:
+	return retval;
+}
+
+static void cypress_disconnect(struct usb_interface *interface)
+{
+	struct cypress *dev;
+
+	dev = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
+
+	/* remove device attribute files */
+	device_remove_file(&interface->dev, &dev_attr_port0);
+	device_remove_file(&interface->dev, &dev_attr_port1);
+
+	usb_put_dev(dev->udev);
+
+	dev_info(&interface->dev,
+		 "Cypress CY7C63xxx device now disconnected\n");
+
+	kfree(dev);
+}
+
+static struct usb_driver cypress_driver = {
+	.name = "cypress_cy7c63",
+	.probe = cypress_probe,
+	.disconnect = cypress_disconnect,
+	.id_table = cypress_table,
+};
+
+static int __init cypress_init(void)
+{
+	int result;
+
+	/* register this driver with the USB subsystem */
+	result = usb_register(&cypress_driver);
+	if (result) {
+		err("Function usb_register failed! Error number: %d\n", result);
+	}
+
+	return result;
+}
+
+static void __exit cypress_exit(void)
+{
+	/* deregister this driver with the USB subsystem */
+	usb_deregister(&cypress_driver);
+}
+
+module_init(cypress_init);
+module_exit(cypress_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 738bd7c7451f..e16582f3733c 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3435,6 +3435,8 @@ static void sisusb_disconnect(struct usb_interface *intf)
 
 static struct usb_device_id sisusb_table [] = {
 	{ USB_DEVICE(0x0711, 0x0900) },
+	{ USB_DEVICE(0x0711, 0x0901) },
+	{ USB_DEVICE(0x0711, 0x0902) },
 	{ USB_DEVICE(0x182d, 0x021c) },
 	{ USB_DEVICE(0x182d, 0x0269) },
 	{ }
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index c82c402285a0..e095772dd8e9 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -200,10 +200,8 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, siz
 
 	/* create a urb, and a buffer for it, and copy the data to the urb */
 	urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!urb) {
-		retval = -ENOMEM;
-		goto error;
-	}
+	if (!urb)
+		return -ENOMEM;
 	
 	buf = usb_buffer_alloc(dev->udev, count, GFP_KERNEL, &urb->transfer_dma);
 	if (!buf) {
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 786e1dbe88ec..983e104dd452 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1242,11 +1242,12 @@ done:
 static int ctrl_out (struct usbtest_dev *dev,
 		unsigned count, unsigned length, unsigned vary)
 {
-	unsigned		i, j, len, retval;
+	unsigned		i, j, len;
+	int			retval;
 	u8			*buf;
 	char			*what = "?";
 	struct usb_device	*udev;
-	
+
 	if (length < 1 || length > 0xffff || vary >= length)
 		return -EINVAL;
 
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index e02c1a30c4cd..f961a770cee2 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -64,7 +64,6 @@ struct mon_reader_text {
 };
 
 static void mon_text_ctor(void *, kmem_cache_t *, unsigned long);
-static void mon_text_dtor(void *, kmem_cache_t *, unsigned long);
 
 /*
  * mon_text_submit
@@ -268,7 +267,7 @@ static int mon_text_open(struct inode *inode, struct file *file)
 	    (long)rp);
 	rp->e_slab = kmem_cache_create(rp->slab_name,
 	    sizeof(struct mon_event_text), sizeof(long), 0,
-	    mon_text_ctor, mon_text_dtor);
+	    mon_text_ctor, NULL);
 	if (rp->e_slab == NULL) {
 		rc = -ENOMEM;
 		goto err_slab;
@@ -459,7 +458,3 @@ static void mon_text_ctor(void *mem, kmem_cache_t *slab, unsigned long sflags)
 	memset(mem, 0xe5, sizeof(struct mon_event_text));
 }
 
-static void mon_text_dtor(void *mem, kmem_cache_t *slab, unsigned long sflags)
-{
-	;
-}
diff --git a/drivers/usb/net/pegasus.h b/drivers/usb/net/pegasus.h
index a54752ce1493..006438069b66 100644
--- a/drivers/usb/net/pegasus.h
+++ b/drivers/usb/net/pegasus.h
@@ -131,6 +131,7 @@ struct usb_eth_dev {
 #define	VENDOR_COREGA		0x07aa
 #define	VENDOR_DLINK		0x2001
 #define	VENDOR_ELCON		0x0db7
+#define	VENDOR_ELECOM		0x056e
 #define	VENDOR_ELSA		0x05cc
 #define	VENDOR_GIGABYTE		0x1044
 #define	VENDOR_HAWKING		0x0e66
@@ -233,6 +234,8 @@ PEGASUS_DEV( "D-Link DSB-650", VENDOR_DLINK, 0xabc1,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002,
 		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
+PEGASUS_DEV( "ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM,  0x4010,
+		DEFAULT_GPIO_RESET  | PEGASUS_II )
 PEGASUS_DEV( "EasiDock Ethernet", VENDOR_MOBILITY, 0x0304,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000,
diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c
index 718f8e2b552b..a72685b96061 100644
--- a/drivers/usb/net/rtl8150.c
+++ b/drivers/usb/net/rtl8150.c
@@ -128,11 +128,13 @@
 #define	VENDOR_ID_MELCO			0x0411
 #define VENDOR_ID_MICRONET		0x3980
 #define	VENDOR_ID_LONGSHINE		0x07b8
+#define	VENDOR_ID_ZYXEL			0x0586
 
 #define PRODUCT_ID_RTL8150		0x8150
 #define	PRODUCT_ID_LUAKTX		0x0012
 #define	PRODUCT_ID_LCS8138TX		0x401a
 #define PRODUCT_ID_SP128AR		0x0003
+#define	PRODUCT_ID_PRESTIGE		0x401a
 
 #undef	EEPROM_WRITE
 
@@ -142,6 +144,7 @@ static struct usb_device_id rtl8150_table[] = {
 	{USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
 	{USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
 	{USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
+	{USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)},
 	{}
 };
 
@@ -172,6 +175,8 @@ static inline struct sk_buff *pull_skb(rtl8150_t *);
 static void rtl8150_disconnect(struct usb_interface *intf);
 static int rtl8150_probe(struct usb_interface *intf,
 			   const struct usb_device_id *id);
+static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message);
+static int rtl8150_resume(struct usb_interface *intf);
 
 static const char driver_name [] = "rtl8150";
 
@@ -180,6 +185,8 @@ static struct usb_driver rtl8150_driver = {
 	.probe =	rtl8150_probe,
 	.disconnect =	rtl8150_disconnect,
 	.id_table =	rtl8150_table,
+	.suspend =	rtl8150_suspend,
+	.resume =	rtl8150_resume
 };
 
 /*
@@ -235,9 +242,11 @@ static int async_set_registers(rtl8150_t * dev, u16 indx, u16 size)
 	usb_fill_control_urb(dev->ctrl_urb, dev->udev,
 			 usb_sndctrlpipe(dev->udev, 0), (char *) &dev->dr,
 			 &dev->rx_creg, size, ctrl_callback, dev);
-	if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC)))
+	if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) {
+		if (ret == -ENODEV)
+			netif_device_detach(dev->netdev);
 		err("control request submission failed: %d", ret);
-	else
+	} else
 		set_bit(RX_REG_SET, &dev->flags);
 
 	return ret;
@@ -413,6 +422,7 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs)
 	struct sk_buff *skb;
 	struct net_device *netdev;
 	u16 rx_stat;
+	int status;
 
 	dev = urb->context;
 	if (!dev)
@@ -462,7 +472,10 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs)
 goon:
 	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
 		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
-	if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) {
+	status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
+	if (status == -ENODEV)
+		netif_device_detach(dev->netdev);
+	else if (status) {
 		set_bit(RX_URB_FAIL, &dev->flags);
 		goto resched;
 	} else {
@@ -478,6 +491,7 @@ static void rx_fixup(unsigned long data)
 {
 	rtl8150_t *dev;
 	struct sk_buff *skb;
+	int status;
 
 	dev = (rtl8150_t *)data;
 
@@ -496,10 +510,13 @@ static void rx_fixup(unsigned long data)
 	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
 		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
 try_again:
-	if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) {
+	status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
+	if (status == -ENODEV) {
+		netif_device_detach(dev->netdev);
+	} else if (status) {
 		set_bit(RX_URB_FAIL, &dev->flags);
 		goto tlsched;
-	 } else {
+	} else {
 		clear_bit(RX_URB_FAIL, &dev->flags);
 	}
 
@@ -571,12 +588,43 @@ static void intr_callback(struct urb *urb, struct pt_regs *regs)
 
 resubmit:
 	status = usb_submit_urb (urb, SLAB_ATOMIC);
-	if (status)
+	if (status == -ENODEV)
+		netif_device_detach(dev->netdev);
+	else if (status)
 		err ("can't resubmit intr, %s-%s/input0, status %d",
 				dev->udev->bus->bus_name,
 				dev->udev->devpath, status);
 }
 
+static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	rtl8150_t *dev = usb_get_intfdata(intf);
+
+	netif_device_detach(dev->netdev);
+
+	if (netif_running(dev->netdev)) {
+		usb_kill_urb(dev->rx_urb);
+		usb_kill_urb(dev->intr_urb);
+	}
+	return 0;
+}
+
+static int rtl8150_resume(struct usb_interface *intf)
+{
+	rtl8150_t *dev = usb_get_intfdata(intf);
+
+	netif_device_attach(dev->netdev);
+	if (netif_running(dev->netdev)) {
+		dev->rx_urb->status = 0;
+		dev->rx_urb->actual_length = 0;
+		read_bulk_callback(dev->rx_urb, NULL);
+
+		dev->intr_urb->status = 0;
+		dev->intr_urb->actual_length = 0;
+		intr_callback(dev->intr_urb, NULL);
+	}
+	return 0;
+}
 
 /*
 **
@@ -687,9 +735,14 @@ static int rtl8150_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 	usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2),
 		      skb->data, count, write_bulk_callback, dev);
 	if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) {
-		warn("failed tx_urb %d\n", res);
-		dev->stats.tx_errors++;
-		netif_start_queue(netdev);
+		/* Can we get/handle EPIPE here? */
+		if (res == -ENODEV)
+			netif_device_detach(dev->netdev);
+		else {
+			warn("failed tx_urb %d\n", res);
+			dev->stats.tx_errors++;
+			netif_start_queue(netdev);
+		}
 	} else {
 		dev->stats.tx_packets++;
 		dev->stats.tx_bytes += skb->len;
@@ -726,16 +779,25 @@ static int rtl8150_open(struct net_device *netdev)
 	
 	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
 		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
-	if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL)))
+	if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) {
+		if (res == -ENODEV)
+			netif_device_detach(dev->netdev);
 		warn("%s: rx_urb submit failed: %d", __FUNCTION__, res);
+		return res;
+	}
 	usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3),
 		     dev->intr_buff, INTBUFSIZE, intr_callback,
 		     dev, dev->intr_interval);
-	if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL)))
+	if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) {
+		if (res == -ENODEV)
+			netif_device_detach(dev->netdev);
 		warn("%s: intr_urb submit failed: %d", __FUNCTION__, res);
-	netif_start_queue(netdev);
+		usb_kill_urb(dev->rx_urb);
+		return res;
+	}
 	enable_net_traffic(dev);
 	set_carrier(netdev);
+	netif_start_queue(netdev);
 
 	return res;
 }
@@ -910,6 +972,7 @@ static void rtl8150_disconnect(struct usb_interface *intf)
 	if (dev) {
 		set_bit(RTL8150_UNPLUG, &dev->flags);
 		tasklet_disable(&dev->tl);
+		tasklet_kill(&dev->tl);
 		unregister_netdev(dev->netdev);
 		unlink_all_urbs(dev);
 		free_all_urbs(dev);
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 8bd44fda5eaf..f5b9438c94f0 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -62,15 +62,6 @@ config USB_SERIAL_AIRPRIME
 	  To compile this driver as a module, choose M here: the
 	  module will be called airprime.
 
-config USB_SERIAL_ANYDATA
-	tristate "USB AnyData CDMA Wireless Driver"
-	depends on USB_SERIAL
-	help
-	  Say Y here if you want to use a AnyData CDMA device.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called anydata.
-
 config USB_SERIAL_ARK3116
 	tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)"
 	depends on USB_SERIAL && EXPERIMENTAL
@@ -456,6 +447,17 @@ config USB_SERIAL_SAFE_PADDED
 	bool "USB Secure Encapsulated Driver - Padded"
 	depends on USB_SERIAL_SAFE
 
+config USB_SERIAL_SIERRAWIRELESS
+	tristate "USB Sierra Wireless Driver"
+	depends on USB_SERIAL
+	help
+	  Say M here if you want to use a Sierra Wireless device (if
+	  using an PC 5220 or AC580 please use the Airprime driver
+	  instead).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sierra.
+
 config USB_SERIAL_TI
 	tristate "USB TI 3410/5052 Serial Driver"
 	depends on USB_SERIAL
@@ -491,15 +493,18 @@ config USB_SERIAL_XIRCOM
 	  module will be called keyspan_pda.
 
 config USB_SERIAL_OPTION
-	tristate "USB driver for GSM modems"
+	tristate "USB driver for GSM and CDMA modems"
 	depends on USB_SERIAL
 	help
-	  Say Y here if you have an "Option" GSM PCMCIA card
-	  (or an OEM version: branded Huawei, Audiovox, or Novatel).
+	  Say Y here if you have a GSM or CDMA modem that's connected to USB.
+
+	  This driver also supports several PCMCIA cards which have a
+	  built-in OHCI-USB adapter and an internally-connected GSM modem.
+	  The USB bus on these cards is not accessible externally.
 
-	  These cards feature a built-in OHCI-USB adapter and an
-	  internally-connected GSM modem. The USB bus is not
-	  accessible externally.
+	  Supported devices include (some of?) those made by:
+	  Option, Huawei, Audiovox, Sierra Wireless, Novatel Wireless, or
+	  Anydata.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called option.
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 5a0960fc9d3e..8efed2ce1ba3 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -12,7 +12,6 @@ usbserial-obj-$(CONFIG_USB_EZUSB)		+= ezusb.o
 usbserial-objs	:= usb-serial.o generic.o bus.o $(usbserial-obj-y)
 
 obj-$(CONFIG_USB_SERIAL_AIRPRIME)		+= airprime.o
-obj-$(CONFIG_USB_SERIAL_ANYDATA)		+= anydata.o
 obj-$(CONFIG_USB_SERIAL_ARK3116)		+= ark3116.o
 obj-$(CONFIG_USB_SERIAL_BELKIN)			+= belkin_sa.o
 obj-$(CONFIG_USB_SERIAL_CP2101)			+= cp2101.o
@@ -39,6 +38,7 @@ obj-$(CONFIG_USB_SERIAL_OMNINET)		+= omninet.o
 obj-$(CONFIG_USB_SERIAL_OPTION)			+= option.o
 obj-$(CONFIG_USB_SERIAL_PL2303)			+= pl2303.o
 obj-$(CONFIG_USB_SERIAL_SAFE)			+= safe_serial.o
+obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)		+= sierra.o
 obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
 obj-$(CONFIG_USB_SERIAL_VISOR)			+= visor.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 94b9ba0ff875..62082532a8b3 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -13,7 +13,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
diff --git a/drivers/usb/serial/anydata.c b/drivers/usb/serial/anydata.c
deleted file mode 100644
index 343f6f228220..000000000000
--- a/drivers/usb/serial/anydata.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * AnyData CDMA Serial USB driver
- *
- * Copyright (C) 2005 Greg Kroah-Hartman <gregkh@suse.de>
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include "usb-serial.h"
-
-static struct usb_device_id id_table [] = {
-	{ USB_DEVICE(0x16d5, 0x6501) },	/* AirData CDMA device */
-	{ },
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-/* if overridden by the user, then use their value for the size of the
- * read and write urbs */
-static int buffer_size;
-static int debug;
-
-static struct usb_driver anydata_driver = {
-	.name =		"anydata",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-	.no_dynamic_id = 	1,
-};
-
-static int anydata_open(struct usb_serial_port *port, struct file *filp)
-{
-	char *buffer;
-	int result = 0;
-
-	dbg("%s - port %d", __FUNCTION__, port->number);
-
-	if (buffer_size) {
-		/* override the default buffer sizes */
-		buffer = kmalloc(buffer_size, GFP_KERNEL);
-		if (!buffer) {
-			dev_err(&port->dev, "%s - out of memory.\n",
-				__FUNCTION__);
-			return -ENOMEM;
-		}
-		kfree (port->read_urb->transfer_buffer);
-		port->read_urb->transfer_buffer = buffer;
-		port->read_urb->transfer_buffer_length = buffer_size;
-
-		buffer = kmalloc(buffer_size, GFP_KERNEL);
-		if (!buffer) {
-			dev_err(&port->dev, "%s - out of memory.\n",
-				__FUNCTION__);
-			return -ENOMEM;
-		}
-		kfree (port->write_urb->transfer_buffer);
-		port->write_urb->transfer_buffer = buffer;
-		port->write_urb->transfer_buffer_length = buffer_size;
-		port->bulk_out_size = buffer_size;
-	}
-
-	/* Start reading from the device */
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-			  usb_rcvbulkpipe(port->serial->dev,
-				  	  port->bulk_in_endpointAddress),
-			  port->read_urb->transfer_buffer,
-			  port->read_urb->transfer_buffer_length,
-			  usb_serial_generic_write_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-			__FUNCTION__, result);
-
-	return result;
-}
-
-static struct usb_serial_driver anydata_device = {
-	.driver = {
-		.owner =	THIS_MODULE,
-		.name =		"anydata",
-	},
-	.id_table =		id_table,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		NUM_DONT_CARE,
-	.num_bulk_out =		NUM_DONT_CARE,
-	.num_ports =		1,
-	.open =			anydata_open,
-};
-
-static int __init anydata_init(void)
-{
-	int retval;
-
-	retval = usb_serial_register(&anydata_device);
-	if (retval)
-		return retval;
-	retval = usb_register(&anydata_driver);
-	if (retval)
-		usb_serial_deregister(&anydata_device);
-	return retval;
-}
-
-static void __exit anydata_exit(void)
-{
-	usb_deregister(&anydata_driver);
-	usb_serial_deregister(&anydata_device);
-}
-
-module_init(anydata_init);
-module_exit(anydata_exit);
-MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");
-module_param(buffer_size, int, 0);
-MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers");
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 8dec796222a0..970d9ef0a7a5 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -21,7 +21,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 
 static int debug;
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 3faa7aa0111a..70ece9e01ce4 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -74,7 +74,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "belkin_sa.h"
 
 static int debug;
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index f2d993b70c18..6542f220468f 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -13,7 +13,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static int usb_serial_device_match (struct device *dev, struct device_driver *drv)
 {
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 3d456b32c316..3a9073dbfe6a 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -17,11 +17,10 @@
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
 static int debug;
 
-#include "usb-serial.h"
-
 struct usbcons_info {
 	int			magic;
 	int			break_flag;
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index df0a4f98b4ae..486c7411b9a7 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -26,7 +26,7 @@
 #include <linux/moduleparam.h>
 #include <linux/usb.h>
 #include <asm/uaccess.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /*
  * Version Information
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 49b51ab0d4cb..6286aba86fae 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -39,7 +39,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 #define CYBERJACK_LOCAL_BUF_SIZE 32
 
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 4ff2dfb299bd..ee70fddcab60 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -59,11 +59,11 @@
 #include <linux/moduleparam.h>
 #include <linux/spinlock.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 #include <linux/serial.h>
 #include <linux/delay.h>
 #include <asm/uaccess.h>
 
-#include "usb-serial.h"
 #include "cypress_m8.h"
 
 
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 6953d3ef5738..9b225183fc7a 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -246,7 +246,7 @@
 #include <asm/uaccess.h>
 #include <linux/usb.h>
 #include <linux/wait.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /* Defines */
 
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 1e2b31eeb497..daafe405d86d 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -62,7 +62,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static int debug;
 
diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c
index debc3b0f9662..5169c2d154ab 100644
--- a/drivers/usb/serial/ezusb.c
+++ b/drivers/usb/serial/ezusb.c
@@ -15,7 +15,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /* EZ-USB Control and Status Register.  Bit 0 controls 8051 reset */
 #define CPUCS_REG    0x7F92
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8a74b19f1283..c6115aa1b445 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -257,7 +257,7 @@
 #include <asm/uaccess.h>
 #include <linux/usb.h>
 #include <linux/serial.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "ftdi_sio.h"
 
 /*
@@ -306,6 +306,8 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 
 
 static struct usb_device_id id_table_combined [] = {
+	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
@@ -313,6 +315,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
@@ -336,6 +339,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) },
@@ -500,6 +504,9 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
+	{ USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -548,11 +555,17 @@ struct ftdi_private {
 	spinlock_t rx_lock;	/* spinlock for receive state */
 	struct work_struct rx_work;
 	int rx_processed;
+	unsigned long rx_bytes;
 
 	__u16 interface;	/* FT2232C port interface (0 for FT232/245) */
 
 	int force_baud;		/* if non-zero, force the baud rate to this value */
 	int force_rtscts;	/* if non-zero, force RTS-CTS to always be enabled */
+
+	spinlock_t tx_lock;	/* spinlock for transmit state */
+	unsigned long tx_bytes;
+	unsigned long tx_outstanding_bytes;
+	unsigned long tx_outstanding_urbs;
 };
 
 /* Used for TIOCMIWAIT */
@@ -626,6 +639,9 @@ static struct usb_serial_driver ftdi_sio_device = {
 #define HIGH 1
 #define LOW 0
 
+/* number of outstanding urbs to prevent userspace DoS from happening */
+#define URB_UPPER_LIMIT	42
+
 /*
  * ***************************************************************************
  * Utlity functions
@@ -1156,6 +1172,7 @@ static int ftdi_sio_attach (struct usb_serial *serial)
 	}
 
 	spin_lock_init(&priv->rx_lock);
+	spin_lock_init(&priv->tx_lock);
         init_waitqueue_head(&priv->delta_msr_wait);
 	/* This will push the characters through immediately rather
 	   than queue a task to deliver them */
@@ -1270,6 +1287,13 @@ static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
 
 	dbg("%s", __FUNCTION__);
 
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	priv->tx_bytes = 0;
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+	spin_lock_irqsave(&priv->rx_lock, flags);
+	priv->rx_bytes = 0;
+	spin_unlock_irqrestore(&priv->rx_lock, flags);
+
 	if (port->tty)
 		port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
@@ -1372,6 +1396,7 @@ static int ftdi_write (struct usb_serial_port *port,
 	int data_offset ;       /* will be 1 for the SIO and 0 otherwise */
 	int status;
 	int transfer_size;
+	unsigned long flags;
 
 	dbg("%s port %d, %d bytes", __FUNCTION__, port->number, count);
 
@@ -1379,6 +1404,13 @@ static int ftdi_write (struct usb_serial_port *port,
 		dbg("write request of 0 bytes");
 		return 0;
 	}
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
+		spin_unlock_irqrestore(&priv->tx_lock, flags);
+		dbg("%s - write limit hit\n", __FUNCTION__);
+		return 0;
+	}
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
 	
 	data_offset = priv->write_offset;
         dbg("data_offset set to %d",data_offset);
@@ -1445,6 +1477,12 @@ static int ftdi_write (struct usb_serial_port *port,
 		err("%s - failed submitting write urb, error %d", __FUNCTION__, status);
 		count = status;
 		kfree (buffer);
+	} else {
+		spin_lock_irqsave(&priv->tx_lock, flags);
+		++priv->tx_outstanding_urbs;
+		priv->tx_outstanding_bytes += count;
+		priv->tx_bytes += count;
+		spin_unlock_irqrestore(&priv->tx_lock, flags);
 	}
 
 	/* we are done with this urb, so let the host driver
@@ -1460,7 +1498,11 @@ static int ftdi_write (struct usb_serial_port *port,
 
 static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
 {
+	unsigned long flags;
 	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+	struct ftdi_private *priv;
+	int data_offset;       /* will be 1 for the SIO and 0 otherwise */
+	unsigned long countback;
 
 	/* free up the transfer buffer, as usb_free_urb() does not do this */
 	kfree (urb->transfer_buffer);
@@ -1472,34 +1514,67 @@ static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
 		return;
 	}
 
+	priv = usb_get_serial_port_data(port);
+	if (!priv) {
+		dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
+		return;
+	}
+	/* account for transferred data */
+	countback = urb->actual_length;
+	data_offset = priv->write_offset;
+	if (data_offset > 0) {
+		/* Subtract the control bytes */
+		countback -= (data_offset * ((countback + (PKTSZ - 1)) / PKTSZ));
+	}
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	--priv->tx_outstanding_urbs;
+	priv->tx_outstanding_bytes -= countback;
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+
 	usb_serial_port_softint(port);
 } /* ftdi_write_bulk_callback */
 
 
 static int ftdi_write_room( struct usb_serial_port *port )
 {
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	int room;
+	unsigned long flags;
+
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	/*
-	 * We really can take anything the user throws at us
-	 * but let's pick a nice big number to tell the tty
-	 * layer that we have lots of free space
-	 */
-	return 2048;
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	if (priv->tx_outstanding_urbs < URB_UPPER_LIMIT) {
+		/*
+		 * We really can take anything the user throws at us
+		 * but let's pick a nice big number to tell the tty
+		 * layer that we have lots of free space
+		 */
+		room = 2048;
+	} else {
+		room = 0;
+	}
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+	return room;
 } /* ftdi_write_room */
 
 
 static int ftdi_chars_in_buffer (struct usb_serial_port *port)
 { /* ftdi_chars_in_buffer */
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	int buffered;
+	unsigned long flags;
+
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	/* 
-	 * We can't really account for how much data we
-	 * have sent out, but hasn't made it through to the
-	 * device, so just tell the tty layer that everything
-	 * is flushed.
-	 */
-	return 0;
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	buffered = (int)priv->tx_outstanding_bytes;
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+	if (buffered < 0) {
+		err("%s outstanding tx bytes is negative!", __FUNCTION__);
+		buffered = 0;
+	}
+	return buffered;
 } /* ftdi_chars_in_buffer */
 
 
@@ -1509,6 +1584,8 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
 	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
 	struct tty_struct *tty;
 	struct ftdi_private *priv;
+	unsigned long countread;
+	unsigned long flags;
 
 	if (urb->number_of_packets > 0) {
 		err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__,
@@ -1543,6 +1620,13 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
 		return;
 	}
 
+	/* count data bytes, but not status bytes */
+	countread = urb->actual_length;
+	countread -= 2 * ((countread + (PKTSZ - 1)) / PKTSZ);
+	spin_lock_irqsave(&priv->rx_lock, flags);
+	priv->rx_bytes += countread;
+	spin_unlock_irqrestore(&priv->rx_lock, flags);
+
 	ftdi_process_read(port);
 
 } /* ftdi_read_bulk_callback */
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 6ab2ac845bd7..77299996f7ee 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -32,10 +32,19 @@
 #define FTDI_NF_RIC_PID	0x0001	/* Product Id */
 
 
+/* www.canusb.com Lawicel CANUSB device */
+#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
+
+/* AlphaMicro Components AMC-232USB01 device */
+#define FTDI_AMC232_PID 0xFF00 /* Product Id */
+
 /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
 #define FTDI_ACTZWAVE_PID	0xF2D0
 
 
+/* www.starting-point-systems.com µChameleon device */
+#define FTDI_MICRO_CHAMELEON_PID	0xCAA0	/* Product Id */
+
 /* www.irtrans.de device */
 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
 
@@ -179,6 +188,10 @@
 /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
 #define FTDI_USB_UIRT_PID	0xF850	/* Product Id */
 
+/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
+
+#define FTDI_TNC_X_PID		0xEBE0
+
 /*
  * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
  * All of these devices use FTDI's vendor ID (0x0403).
@@ -442,6 +455,23 @@
  */
 #define FTDI_YEI_SERVOCENTER31_PID	0xE050	/* YEI ServoCenter3.1 USB */
 
+/*
+ * ThorLabs USB motor drivers
+ */
+#define FTDI_THORLABS_PID		0xfaf0 /* ThorLabs USB motor drivers */
+
+/*
+ * Testo products (http://www.testo.com/)
+ * Submitted by Colin Leroy
+ */
+#define TESTO_VID			0x128D
+#define TESTO_USB_INTERFACE_PID		0x0001
+
+/*
+ * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
+ */
+#define FTDI_GAMMA_SCOUT_PID		0xD678	/* Gamma Scout online */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
index 803721b97e2e..77b977206a8c 100644
--- a/drivers/usb/serial/funsoft.c
+++ b/drivers/usb/serial/funsoft.c
@@ -13,7 +13,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1404, 0xcddc) },
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 1f5d1620baa1..727852634be9 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -35,6 +35,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
 /* the mode to be set when the port ist opened */
 static int initial_mode = 1;
@@ -42,8 +43,6 @@ static int initial_mode = 1;
 /* debug flag */
 static int debug = 0;
 
-#include "usb-serial.h"
-
 #define GARMIN_VENDOR_ID             0x091E
 
 /*
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 945b8bb38c92..172713556393 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -17,8 +17,8 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 #include <asm/uaccess.h>
-#include "usb-serial.h"
 
 static int debug;
 
@@ -285,6 +285,7 @@ void usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *reg
 	if (result)
 		dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
 
 void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
 {
diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index 7e06358b0310..ebcac701b069 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -17,7 +17,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /*
  * Version Information
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index bd2c05dac2a9..c49976c3ad52 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -44,7 +44,7 @@
 #include <linux/wait.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "io_edgeport.h"
 #include "io_ionsp.h"		/* info for the iosp messages */
 #include "io_16654.h"		/* 16654 UART defines */
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 723a12ae87b5..17c5b1d2311a 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -39,8 +39,8 @@
 #include <asm/uaccess.h>
 #include <asm/semaphore.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
-#include "usb-serial.h"
 #include "io_16654.h"
 #include "io_usbvend.h"
 #include "io_ti.h"
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index dbcfe172a5cc..9840bade79f9 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -55,7 +55,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "ipaq.h"
 
 #define KP_RETRIES	100
@@ -70,6 +70,8 @@
 
 static __u16 product, vendor;
 static int debug;
+static int connect_retries = KP_RETRIES;
+static int initial_wait;
 
 /* Function prototypes for an ipaq */
 static int  ipaq_open (struct usb_serial_port *port, struct file *filp);
@@ -248,6 +250,9 @@ static struct usb_device_id ipaq_id_table [] = {
 	{ USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */
 	{ USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */
 	{ USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */
+	{ USB_DEVICE(0x04DD, 0x9102) }, /* SHARP WS003SH USB Modem */
+	{ USB_DEVICE(0x04DD, 0x9121) }, /* SHARP WS004SH USB Modem */
+	{ USB_DEVICE(0x04DD, 0x9123) }, /* SHARP WS007SH USB Modem */
 	{ USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */
 	{ USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */
 	{ USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */
@@ -582,7 +587,7 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp)
 	struct ipaq_private	*priv;
 	struct ipaq_packet	*pkt;
 	int			i, result = 0;
-	int			retries = KP_RETRIES;
+	int			retries = connect_retries;
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
@@ -646,16 +651,12 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp)
 	port->read_urb->transfer_buffer_length = URBDATA_SIZE;
 	port->bulk_out_size = port->write_urb->transfer_buffer_length = URBDATA_SIZE;
 	
+	msleep(1000*initial_wait);
 	/* Start reading from the device */
 	usb_fill_bulk_urb(port->read_urb, serial->dev, 
 		      usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
 		      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
 		      ipaq_read_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result) {
-		err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
-		goto error;
-	}
 
 	/*
 	 * Send out control message observed in win98 sniffs. Not sure what
@@ -670,8 +671,14 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp)
 				usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21,
 				0x1, 0, NULL, 0, 100);
 		if (result == 0) {
+			result = usb_submit_urb(port->read_urb, GFP_KERNEL);
+			if (result) {
+				err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
+				goto error;
+			}
 			return 0;
 		}
+		msleep(1000);
 	}
 	err("%s - failed doing control urb, error %d", __FUNCTION__, result);
 	goto error;
@@ -854,6 +861,7 @@ static void ipaq_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
 	
 	if (urb->status) {
 		dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
+		return;
 	}
 
 	spin_lock_irqsave(&write_list_lock, flags);
@@ -966,3 +974,9 @@ MODULE_PARM_DESC(vendor, "User specified USB idVendor");
 
 module_param(product, ushort, 0);
 MODULE_PARM_DESC(product, "User specified USB idProduct");
+
+module_param(connect_retries, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(connect_retries, "Maximum number of connect retries (one second each)");
+
+module_param(initial_wait, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(initial_wait, "Time to wait before attempting a connection (in seconds)");
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index a4a0bfeaab00..87306cb6f9f5 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -46,8 +46,8 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 #include <asm/uaccess.h>
-#include "usb-serial.h"
 
 /*
  * Version Information
@@ -373,6 +373,8 @@ static void ipw_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
 
 	dbg("%s", __FUNCTION__);
 
+	port->write_urb_busy = 0;
+
 	if (urb->status)
 		dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
 
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 2cf1fed3de43..1738b0b6a376 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -57,7 +57,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /*
  * Version Information
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index d7c58f1bc960..015ad6cc1bbb 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -107,7 +107,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "keyspan.h"
 
 static int debug;
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 03ab3c0f3cce..49b8dc039d1f 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -78,6 +78,7 @@
 #include <linux/workqueue.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
 static int debug;
 
@@ -107,8 +108,6 @@ struct ezusb_hex_record {
 #include "xircom_pgs_fw.h"
 #endif
 
-#include "usb-serial.h"
-
 /*
  * Version Information
  */
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index b45ff3e7ab40..2a2f3e2da055 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -55,7 +55,7 @@
 #include <linux/module.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "kl5kusb105.h"
 
 static int debug;
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 457733374772..d50dce034958 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -46,8 +46,8 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 #include <linux/ioctl.h>
-#include "usb-serial.h"
 #include "kobil_sct.h"
 
 static int debug;
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index ca05d3275f3e..f4d4305c2c02 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -75,7 +75,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "mct_u232.h"
 
 /*
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index 7f544081032e..ac3f8b5d2c49 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -14,7 +14,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static int debug;
 
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index cfb711a21a45..e49f40913c27 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -46,7 +46,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static int debug;
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 78ad4b3126a6..c856e6f40e22 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -9,39 +9,14 @@
 
   Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 
-  History:
-
-  2005-05-19  v0.1   Initial version, based on incomplete docs
-                     and analysis of misbehavior with the standard driver
-  2005-05-20  v0.2   Extended the input buffer to avoid losing
-                     random 64-byte chunks of data
-  2005-05-21  v0.3   implemented chars_in_buffer()
-                     turned on low_latency
-                     simplified the code somewhat
-  2005-05-24  v0.4   option_write() sometimes deadlocked under heavy load
-                     removed some dead code
-                     added sponsor notice
-                     coding style clean-up
-  2005-06-20  v0.4.1 add missing braces :-/
-                     killed end-of-line whitespace
-  2005-07-15  v0.4.2 rename WLAN product to FUSION, add FUSION2
-  2005-09-10  v0.4.3 added HUAWEI E600 card and Audiovox AirCard
-  2005-09-20  v0.4.4 increased recv buffer size: the card sometimes
-                     wants to send >2000 bytes.
-  2006-04-10  v0.5   fixed two array overrun errors :-/
-  2006-04-21  v0.5.1 added support for Sierra Wireless MC8755
-  2006-05-15  v0.6   re-enable multi-port support
-  2006-06-01  v0.6.1 add COBRA
-  2006-06-01  v0.6.2 add backwards-compatibility stuff
-  2006-06-01  v0.6.3 add Novatel Wireless
-  2006-06-01  v0.7   Option => GSM
+  History: see the git log.
 
   Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
 
   This driver exists because the "normal" serial driver doesn't work too well
   with GSM modems. Issues:
   - data loss -- one single Receive URB is not nearly enough
-  - nonstandard flow (Option devices) and multiplex (Sierra) control
+  - nonstandard flow (Option devices) control
   - controlling the baud rate doesn't make sense
 
   This driver is named "option" because the most common device it's
@@ -53,7 +28,7 @@
   device features.
 */
 
-#define DRIVER_VERSION "v0.7.0"
+#define DRIVER_VERSION "v0.7.1"
 #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
 #define DRIVER_DESC "USB Driver for GSM modems"
 
@@ -64,7 +39,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /* Function prototypes */
 static int  option_open(struct usb_serial_port *port, struct file *filp);
@@ -95,27 +70,29 @@ static int  option_send_setup(struct usb_serial_port *port);
 #define OPTION_VENDOR_ID                0x0AF0
 #define HUAWEI_VENDOR_ID                0x12D1
 #define AUDIOVOX_VENDOR_ID              0x0F3D
-#define SIERRAWIRELESS_VENDOR_ID        0x1199
 #define NOVATELWIRELESS_VENDOR_ID       0x1410
+#define ANYDATA_VENDOR_ID               0x16d5
 
 #define OPTION_PRODUCT_OLD              0x5000
 #define OPTION_PRODUCT_FUSION           0x6000
 #define OPTION_PRODUCT_FUSION2          0x6300
 #define OPTION_PRODUCT_COBRA            0x6500
+#define OPTION_PRODUCT_COBRA2           0x6600
 #define HUAWEI_PRODUCT_E600             0x1001
 #define AUDIOVOX_PRODUCT_AIRCARD        0x0112
-#define SIERRAWIRELESS_PRODUCT_MC8755   0x6802
 #define NOVATELWIRELESS_PRODUCT_U740    0x1400
+#define ANYDATA_PRODUCT_ID              0x6501
 
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
 	{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
-	{ USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
+	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
 	{ } /* Terminating entry */
 };
 
@@ -124,13 +101,11 @@ static struct usb_device_id option_ids1[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
 	{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
-	{ } /* Terminating entry */
-};
-static struct usb_device_id option_ids3[] = {
-	{ USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) },
+	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
 	{ } /* Terminating entry */
 };
 
@@ -147,37 +122,11 @@ static struct usb_driver option_driver = {
 /* The card has three separate interfaces, which the serial driver
  * recognizes separately, thus num_port=1.
  */
-static struct usb_serial_driver option_3port_device = {
-	.driver = {
-		.owner =	THIS_MODULE,
-		.name =		"option",
-	},
-	.description       = "GSM modem (3-port)",
-	.id_table          = option_ids3,
-	.num_interrupt_in  = NUM_DONT_CARE,
-	.num_bulk_in       = NUM_DONT_CARE,
-	.num_bulk_out      = NUM_DONT_CARE,
-	.num_ports         = 3,
-	.open              = option_open,
-	.close             = option_close,
-	.write             = option_write,
-	.write_room        = option_write_room,
-	.chars_in_buffer   = option_chars_in_buffer,
-	.throttle          = option_rx_throttle,
-	.unthrottle        = option_rx_unthrottle,
-	.set_termios       = option_set_termios,
-	.break_ctl         = option_break_ctl,
-	.tiocmget          = option_tiocmget,
-	.tiocmset          = option_tiocmset,
-	.attach            = option_startup,
-	.shutdown          = option_shutdown,
-	.read_int_callback = option_instat_callback,
-};
 
 static struct usb_serial_driver option_1port_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
-		.name =		"option",
+		.name =		"option1",
 	},
 	.description       = "GSM modem (1-port)",
 	.id_table          = option_ids1,
@@ -241,9 +190,6 @@ static int __init option_init(void)
 	retval = usb_serial_register(&option_1port_device);
 	if (retval)
 		goto failed_1port_device_register;
-	retval = usb_serial_register(&option_3port_device);
-	if (retval)
-		goto failed_3port_device_register;
 	retval = usb_register(&option_driver);
 	if (retval)
 		goto failed_driver_register;
@@ -253,8 +199,6 @@ static int __init option_init(void)
 	return 0;
 
 failed_driver_register:
-	usb_serial_deregister (&option_3port_device);
-failed_3port_device_register:
 	usb_serial_deregister (&option_1port_device);
 failed_1port_device_register:
 	return retval;
@@ -263,7 +207,6 @@ failed_1port_device_register:
 static void __exit option_exit(void)
 {
 	usb_deregister (&option_driver);
-	usb_serial_deregister (&option_3port_device);
 	usb_serial_deregister (&option_1port_device);
 }
 
@@ -652,7 +595,6 @@ static void option_setup_urbs(struct usb_serial *serial)
 
 	dbg("%s", __FUNCTION__);
 
-
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
 		portdata = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index de93a2b909e7..65e4d046951a 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -27,7 +27,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "pl2303.h"
 
 /*
@@ -52,6 +52,7 @@ struct pl2303_buf {
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
@@ -78,7 +79,8 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
 	{ USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
 	{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
-	{ USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) },
+	{ USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
+	{ USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 7f29e81d3e35..55195e76eb6f 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -10,6 +10,7 @@
 #define PL2303_VENDOR_ID	0x067b
 #define PL2303_PRODUCT_ID	0x2303
 #define PL2303_PRODUCT_ID_RSAQ2		0x04bb
+#define PL2303_PRODUCT_ID_DCU11		0x1234
 #define PL2303_PRODUCT_ID_PHAROS	0xaaa0
 #define PL2303_PRODUCT_ID_RSAQ3		0xaaa2
 
@@ -81,6 +82,10 @@
 #define SPEEDDRAGON_VENDOR_ID	0x0e55
 #define SPEEDDRAGON_PRODUCT_ID	0x110b
 
-/* Ours Technology Inc DKU-5 clone, chipset: Prolific Technology Inc */
-#define OTI_VENDOR_ID	0x0ea0
-#define OTI_PRODUCT_ID	0x6858
+/* DATAPILOT Universal-2 Phone Cable */
+#define DATAPILOT_U2_VENDOR_ID	0x0731
+#define DATAPILOT_U2_PRODUCT_ID	0x2003
+
+/* Belkin "F5U257" Serial Adapter */
+#define BELKIN_VENDOR_ID	0x050d
+#define BELKIN_PRODUCT_ID	0x0257
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 897d8447252b..789771ecdb11 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -71,7 +71,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 
 #ifndef CONFIG_USB_SAFE_PADDED
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
new file mode 100644
index 000000000000..d29638daa987
--- /dev/null
+++ b/drivers/usb/serial/sierra.c
@@ -0,0 +1,75 @@
+/*
+ * Sierra Wireless CDMA Wireless Serial USB driver
+ *
+ * Current Copy modified by: Kevin Lloyd <linux@sierrawireless.com>
+ * Original Copyright (C) 2005-2006 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License version
+ *	2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static struct usb_device_id id_table [] = {
+	{ USB_DEVICE(0x1199, 0x0018) },	/* Sierra Wireless MC5720 */
+	{ USB_DEVICE(0x1199, 0x0020) },	/* Sierra Wireless MC5725 */
+	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
+	{ USB_DEVICE(0x1199, 0x0019) },	/* Sierra Wireless AirCard 595 */
+	{ USB_DEVICE(0x1199, 0x6802) },	/* Sierra Wireless MC8755 */
+	{ USB_DEVICE(0x1199, 0x6803) },	/* Sierra Wireless MC8765 */
+	{ USB_DEVICE(0x1199, 0x6812) },	/* Sierra Wireless MC8775 */
+	{ USB_DEVICE(0x1199, 0x6820) },	/* Sierra Wireless AirCard 875 */
+	/* Following devices are supported in the airprime.c driver */
+	/* { USB_DEVICE(0x1199, 0x0112) }, */	/* Sierra Wireless AirCard 580 */
+	/* { USB_DEVICE(0x0F3D, 0x0112) }, */	/* AirPrime/Sierra PC 5220 */
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver sierra_driver = {
+	.name =		"sierra_wireless",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+};
+
+static struct usb_serial_driver sierra_device = {
+	.driver = {
+	.owner =		THIS_MODULE,
+	.name =			"Sierra_Wireless",
+	},
+	.id_table =		id_table,
+	.num_interrupt_in =	NUM_DONT_CARE,
+	.num_bulk_in =		NUM_DONT_CARE,
+	.num_bulk_out =		NUM_DONT_CARE,
+	.num_ports =		3,
+};
+
+static int __init sierra_init(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&sierra_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&sierra_driver);
+	if (retval)
+		usb_serial_deregister(&sierra_device);
+	return retval;
+}
+
+static void __exit sierra_exit(void)
+{
+	usb_deregister(&sierra_driver);
+	usb_serial_deregister(&sierra_device);
+}
+
+module_init(sierra_init);
+module_exit(sierra_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index a9afff31a921..ac9b8ee52d44 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -83,8 +83,8 @@
 #include <asm/uaccess.h>
 #include <asm/semaphore.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
-#include "usb-serial.h"
 #include "ti_usb_3410_5052.h"
 #include "ti_fw_3410.h"		/* firmware image for 3410 */
 #include "ti_fw_5052.h"		/* firmware image for 5052 */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index b59a0536ea5c..e06a41bd0f3b 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -31,7 +31,7 @@
 #include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "pl2303.h"
 
 /*
@@ -40,6 +40,8 @@
 #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/"
 #define DRIVER_DESC "USB Serial Driver core"
 
+static void port_free(struct usb_serial_port *port);
+
 /* Driver structure we register with the USB core */
 static struct usb_driver usb_serial_driver = {
 	.name =		"usbserial",
@@ -146,23 +148,10 @@ static void destroy_serial(struct kref *kref)
 			port = serial->port[i];
 			if (!port)
 				continue;
-			usb_kill_urb(port->read_urb);
-			usb_free_urb(port->read_urb);
-			usb_kill_urb(port->write_urb);
-			usb_free_urb(port->write_urb);
-			usb_kill_urb(port->interrupt_in_urb);
-			usb_free_urb(port->interrupt_in_urb);
-			usb_kill_urb(port->interrupt_out_urb);
-			usb_free_urb(port->interrupt_out_urb);
-			kfree(port->bulk_in_buffer);
-			kfree(port->bulk_out_buffer);
-			kfree(port->interrupt_in_buffer);
-			kfree(port->interrupt_out_buffer);
+			port_free(port);
 		}
 	}
 
-	flush_scheduled_work();		/* port->work */
-
 	usb_put_dev(serial->dev);
 
 	/* free up any memory that we allocated */
@@ -475,8 +464,10 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int
 		length += sprintf (page+length, " path:%s", tmp);
 			
 		length += sprintf (page+length, "\n");
-		if ((length + begin) > (off + count))
+		if ((length + begin) > (off + count)) {
+			usb_serial_put(serial);
 			goto done;
+		}
 		if ((length + begin) < off) {
 			begin += length;
 			length = 0;
@@ -564,6 +555,11 @@ static void port_release(struct device *dev)
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 
 	dbg ("%s - %s", __FUNCTION__, dev->bus_id);
+	port_free(port);
+}
+
+static void port_free(struct usb_serial_port *port)
+{
 	usb_kill_urb(port->read_urb);
 	usb_free_urb(port->read_urb);
 	usb_kill_urb(port->write_urb);
@@ -576,6 +572,7 @@ static void port_release(struct device *dev)
 	kfree(port->bulk_out_buffer);
 	kfree(port->interrupt_in_buffer);
 	kfree(port->interrupt_out_buffer);
+	flush_scheduled_work();		/* port->work */
 	kfree(port);
 }
 
diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h
deleted file mode 100644
index 0f2802a60194..000000000000
--- a/drivers/usb/serial/usb-serial.h
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * USB Serial Converter driver
- *
- *	Copyright (C) 1999 - 2005
- *	    Greg Kroah-Hartman (greg@kroah.com)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License.
- *
- */
-
-
-#ifndef __LINUX_USB_SERIAL_H
-#define __LINUX_USB_SERIAL_H
-
-#include <linux/kref.h>
-#include <linux/mutex.h>
-
-#define SERIAL_TTY_MAJOR	188	/* Nice legal number now */
-#define SERIAL_TTY_MINORS	255	/* loads of devices :) */
-
-#define MAX_NUM_PORTS		8	/* The maximum number of ports one device can grab at once */
-
-/* parity check flag */
-#define RELEVANT_IFLAG(iflag)	(iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
-/**
- * usb_serial_port: structure for the specific ports of a device.
- * @serial: pointer back to the struct usb_serial owner of this port.
- * @tty: pointer to the corresponding tty for this port.
- * @lock: spinlock to grab when updating portions of this structure.
- * @mutex: mutex used to synchronize serial_open() and serial_close()
- *	access for this port.
- * @number: the number of the port (the minor number).
- * @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
- * @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
- * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe
- *	for this port.
- * @interrupt_out_buffer: pointer to the interrupt out buffer for this port.
- * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes.
- * @interrupt_out_urb: pointer to the interrupt out struct urb for this port.
- * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
- * 	for this port.
- * @bulk_in_buffer: pointer to the bulk in buffer for this port.
- * @read_urb: pointer to the bulk in struct urb for this port.
- * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
- *	port.
- * @bulk_out_buffer: pointer to the bulk out buffer for this port.
- * @bulk_out_size: the size of the bulk_out_buffer, in bytes.
- * @write_urb: pointer to the bulk out struct urb for this port.
- * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
- *	port.
- * @write_wait: a wait_queue_head_t used by the port.
- * @work: work queue entry for the line discipline waking up.
- * @open_count: number of times this port has been opened.
- *
- * This structure is used by the usb-serial core and drivers for the specific
- * ports of a device.
- */
-struct usb_serial_port {
-	struct usb_serial *	serial;
-	struct tty_struct *	tty;
-	spinlock_t		lock;
-	struct mutex            mutex;
-	unsigned char		number;
-
-	unsigned char *		interrupt_in_buffer;
-	struct urb *		interrupt_in_urb;
-	__u8			interrupt_in_endpointAddress;
-
-	unsigned char *		interrupt_out_buffer;
-	int			interrupt_out_size;
-	struct urb *		interrupt_out_urb;
-	__u8			interrupt_out_endpointAddress;
-
-	unsigned char *		bulk_in_buffer;
-	int			bulk_in_size;
-	struct urb *		read_urb;
-	__u8			bulk_in_endpointAddress;
-
-	unsigned char *		bulk_out_buffer;
-	int			bulk_out_size;
-	struct urb *		write_urb;
-	int			write_urb_busy;
-	__u8			bulk_out_endpointAddress;
-
-	wait_queue_head_t	write_wait;
-	struct work_struct	work;
-	int			open_count;
-	struct device		dev;
-};
-#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
-
-/* get and set the port private data pointer helper functions */
-static inline void *usb_get_serial_port_data (struct usb_serial_port *port)
-{
-	return dev_get_drvdata(&port->dev);
-}
-
-static inline void usb_set_serial_port_data (struct usb_serial_port *port, void *data)
-{
-	dev_set_drvdata(&port->dev, data);
-}
-
-/**
- * usb_serial - structure used by the usb-serial core for a device
- * @dev: pointer to the struct usb_device for this device
- * @type: pointer to the struct usb_serial_driver for this device
- * @interface: pointer to the struct usb_interface for this device
- * @minor: the starting minor number for this device
- * @num_ports: the number of ports this device has
- * @num_interrupt_in: number of interrupt in endpoints we have
- * @num_interrupt_out: number of interrupt out endpoints we have
- * @num_bulk_in: number of bulk in endpoints we have
- * @num_bulk_out: number of bulk out endpoints we have
- * @port: array of struct usb_serial_port structures for the different ports.
- * @private: place to put any driver specific information that is needed.  The
- *	usb-serial driver is required to manage this data, the usb-serial core
- *	will not touch this.  Use usb_get_serial_data() and
- *	usb_set_serial_data() to access this.
- */
-struct usb_serial {
-	struct usb_device *		dev;
-	struct usb_serial_driver *	type;
-	struct usb_interface *		interface;
-	unsigned char			minor;
-	unsigned char			num_ports;
-	unsigned char			num_port_pointers;
-	char				num_interrupt_in;
-	char				num_interrupt_out;
-	char				num_bulk_in;
-	char				num_bulk_out;
-	struct usb_serial_port *	port[MAX_NUM_PORTS];
-	struct kref			kref;
-	void *				private;
-};
-#define to_usb_serial(d) container_of(d, struct usb_serial, kref)
-
-#define NUM_DONT_CARE	(-1)
-
-/* get and set the serial private data pointer helper functions */
-static inline void *usb_get_serial_data (struct usb_serial *serial)
-{
-	return serial->private;
-}
-
-static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
-{
-	serial->private = data;
-}
-
-/**
- * usb_serial_driver - describes a usb serial driver
- * @description: pointer to a string that describes this driver.  This string used
- *	in the syslog messages when a device is inserted or removed.
- * @id_table: pointer to a list of usb_device_id structures that define all
- *	of the devices this structure can support.
- * @num_interrupt_in: the number of interrupt in endpoints this device will
- *	have.
- * @num_interrupt_out: the number of interrupt out endpoints this device will
- *	have.
- * @num_bulk_in: the number of bulk in endpoints this device will have.
- * @num_bulk_out: the number of bulk out endpoints this device will have.
- * @num_ports: the number of different ports this device will have.
- * @calc_num_ports: pointer to a function to determine how many ports this
- *	device has dynamically.  It will be called after the probe()
- *	callback is called, but before attach()
- * @probe: pointer to the driver's probe function.
- *	This will be called when the device is inserted into the system,
- *	but before the device has been fully initialized by the usb_serial
- *	subsystem.  Use this function to download any firmware to the device,
- *	or any other early initialization that might be needed.
- *	Return 0 to continue on with the initialization sequence.  Anything 
- *	else will abort it.
- * @attach: pointer to the driver's attach function.
- *	This will be called when the struct usb_serial structure is fully set
- *	set up.  Do any local initialization of the device, or any private
- *	memory structure allocation at this point in time.
- * @shutdown: pointer to the driver's shutdown function.  This will be
- *	called when the device is removed from the system.
- *
- * This structure is defines a USB Serial driver.  It provides all of
- * the information that the USB serial core code needs.  If the function
- * pointers are defined, then the USB serial core code will call them when
- * the corresponding tty port functions are called.  If they are not
- * called, the generic serial function will be used instead.
- *
- * The driver.owner field should be set to the module owner of this driver.
- * The driver.name field should be set to the name of this driver (remember
- * it will show up in sysfs, so it needs to be short and to the point.
- * Useing the module name is a good idea.)
- */
-struct usb_serial_driver {
-	const char *description;
-	const struct usb_device_id *id_table;
-	char	num_interrupt_in;
-	char	num_interrupt_out;
-	char	num_bulk_in;
-	char	num_bulk_out;
-	char	num_ports;
-
-	struct list_head	driver_list;
-	struct device_driver	driver;
-
-	int (*probe) (struct usb_serial *serial, const struct usb_device_id *id);
-	int (*attach) (struct usb_serial *serial);
-	int (*calc_num_ports) (struct usb_serial *serial);
-
-	void (*shutdown) (struct usb_serial *serial);
-
-	int (*port_probe) (struct usb_serial_port *port);
-	int (*port_remove) (struct usb_serial_port *port);
-
-	/* serial function calls */
-	int  (*open)		(struct usb_serial_port *port, struct file * filp);
-	void (*close)		(struct usb_serial_port *port, struct file * filp);
-	int  (*write)		(struct usb_serial_port *port, const unsigned char *buf, int count);
-	int  (*write_room)	(struct usb_serial_port *port);
-	int  (*ioctl)		(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-	void (*set_termios)	(struct usb_serial_port *port, struct termios * old);
-	void (*break_ctl)	(struct usb_serial_port *port, int break_state);
-	int  (*chars_in_buffer)	(struct usb_serial_port *port);
-	void (*throttle)	(struct usb_serial_port *port);
-	void (*unthrottle)	(struct usb_serial_port *port);
-	int  (*tiocmget)	(struct usb_serial_port *port, struct file *file);
-	int  (*tiocmset)	(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
-
-	void (*read_int_callback)(struct urb *urb, struct pt_regs *regs);
-	void (*write_int_callback)(struct urb *urb, struct pt_regs *regs);
-	void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs);
-	void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs);
-};
-#define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver)
-
-extern int  usb_serial_register(struct usb_serial_driver *driver);
-extern void usb_serial_deregister(struct usb_serial_driver *driver);
-extern void usb_serial_port_softint(struct usb_serial_port *port);
-
-extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id);
-extern void usb_serial_disconnect(struct usb_interface *iface);
-
-extern int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *data, int length, __u8 bRequest);
-extern int ezusb_set_reset (struct usb_serial *serial, unsigned char reset_bit);
-
-/* USB Serial console functions */
-#ifdef CONFIG_USB_SERIAL_CONSOLE
-extern void usb_serial_console_init (int debug, int minor);
-extern void usb_serial_console_exit (void);
-extern void usb_serial_console_disconnect(struct usb_serial *serial);
-#else
-static inline void usb_serial_console_init (int debug, int minor) { }
-static inline void usb_serial_console_exit (void) { }
-static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
-#endif
-
-/* Functions needed by other parts of the usbserial core */
-extern struct usb_serial *usb_serial_get_by_index (unsigned int minor);
-extern void usb_serial_put(struct usb_serial *serial);
-extern int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp);
-extern int usb_serial_generic_write (struct usb_serial_port *port, const unsigned char *buf, int count);
-extern void usb_serial_generic_close (struct usb_serial_port *port, struct file *filp);
-extern int usb_serial_generic_write_room (struct usb_serial_port *port);
-extern int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port);
-extern void usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
-extern void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
-extern void usb_serial_generic_shutdown (struct usb_serial *serial);
-extern int usb_serial_generic_register (int debug);
-extern void usb_serial_generic_deregister (void);
-
-extern int usb_serial_bus_register (struct usb_serial_driver *device);
-extern void usb_serial_bus_deregister (struct usb_serial_driver *device);
-
-extern struct usb_serial_driver usb_serial_generic_device;
-extern struct bus_type usb_serial_bus_type;
-extern struct tty_driver *usb_serial_tty_driver;
-
-static inline void usb_serial_debug_data(int debug,
-					 struct device *dev,
-					 const char *function, int size,
-					 const unsigned char *data)
-{
-	int i;
-
-	if (debug) {
-		dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ", function, size);
-		for (i = 0; i < size; ++i)
-			printk ("%.2x ", data[i]);
-		printk ("\n");
-	}
-}
-
-/* Use our own dbg macro */
-#undef dbg
-#define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg); } while (0)
-
-
-
-#endif	/* ifdef __LINUX_USB_SERIAL_H */
-
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 95a2936e902e..88949f7884ca 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -25,7 +25,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "visor.h"
 
 /*
@@ -302,7 +302,6 @@ static int visor_open (struct usb_serial_port *port, struct file *filp)
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->bytes_in = 0;
 	priv->bytes_out = 0;
-	priv->outstanding_urbs = 0;
 	priv->throttled = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
@@ -435,13 +434,25 @@ static int visor_write (struct usb_serial_port *port, const unsigned char *buf,
 
 static int visor_write_room (struct usb_serial_port *port)
 {
+	struct visor_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
 	/*
 	 * We really can take anything the user throws at us
 	 * but let's pick a nice big number to tell the tty
-	 * layer that we have lots of free space
+	 * layer that we have lots of free space, unless we don't.
 	 */
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		dbg("%s - write limit hit\n", __FUNCTION__);
+		return 0;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	return 2048;
 }
 
@@ -758,15 +769,22 @@ static int visor_calc_num_ports (struct usb_serial *serial)
 
 static int generic_startup(struct usb_serial *serial)
 {
+	struct usb_serial_port **ports = serial->port;
 	struct visor_private *priv;
 	int i;
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		priv = kzalloc (sizeof(*priv), GFP_KERNEL);
-		if (!priv)
+		if (!priv) {
+			while (i-- != 0) {
+				priv = usb_get_serial_port_data(ports[i]);
+				usb_set_serial_port_data(ports[i], NULL);
+				kfree(priv);
+			}
 			return -ENOMEM;
+		}
 		spin_lock_init(&priv->lock);
-		usb_set_serial_port_data(serial->port[i], priv);
+		usb_set_serial_port_data(ports[i], priv);
 	}
 	return 0;
 }
@@ -876,7 +894,18 @@ static int clie_5_attach (struct usb_serial *serial)
 
 static void visor_shutdown (struct usb_serial *serial)
 {
+	struct visor_private *priv;
+	int i;
+
 	dbg("%s", __FUNCTION__);
+
+	for (i = 0; i < serial->num_ports; i++) {
+		priv = usb_get_serial_port_data(serial->port[i]);
+		if (priv) {
+			usb_set_serial_port_data(serial->port[i], NULL);
+			kfree(priv);
+		}
+	}
 }
 
 static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 540438c3f381..6e6c7934be32 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -79,7 +79,7 @@
 #include <linux/usb.h>
 #include <linux/serial_reg.h>
 #include <linux/serial.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "whiteheat_fw.h"		/* firmware for the ConnectTech WhiteHEAT device */
 #include "whiteheat.h"			/* WhiteHEAT specific commands */
 
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 5715291ba540..a4b7df9ff8c1 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -112,13 +112,11 @@ static int slave_configure(struct scsi_device *sdev)
 	if (sdev->scsi_level < SCSI_2)
 		sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;
 
-	/* According to the technical support people at Genesys Logic,
-	 * devices using their chips have problems transferring more than
-	 * 32 KB at a time.  In practice people have found that 64 KB
-	 * works okay and that's what Windows does.  But we'll be
-	 * conservative; people can always use the sysfs interface to
-	 * increase max_sectors. */
-	if (le16_to_cpu(us->pusb_dev->descriptor.idVendor) == USB_VENDOR_ID_GENESYS &&
+	/* Many devices have trouble transfering more than 32KB at a time,
+	 * while others have trouble with more than 64K. At this time we
+	 * are limiting both to 32K (64 sectores).
+	 */
+	if ((us->flags & US_FL_MAX_SECTORS_64) &&
 			sdev->request_queue->max_sectors > 64)
 		blk_queue_max_sectors(sdev->request_queue, 64);
 
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index eb7188b3565c..d6acc92a4ae3 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -180,7 +180,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
 	if (timeleft <= 0) {
 		US_DEBUGP("%s -- cancelling URB\n",
 			  timeleft == 0 ? "Timeout" : "Signal");
-		usb_unlink_urb(us->current_urb);
+		usb_kill_urb(us->current_urb);
 	}
 
 	/* return the URB status */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index c7e84e653df9..b130e170b4a8 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -112,6 +112,19 @@ UNUSUAL_DEV(  0x0411, 0x001c, 0x0113, 0x0113,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
+/* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */
+UNUSUAL_DEV(  0x0419, 0x0100, 0x0100, 0x0100,
+                "Samsung Info. Systems America, Inc.",
+                "MP3 Player",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Orgad Shaneh <orgads@gmail.com> */
+UNUSUAL_DEV(  0x0419, 0xaace, 0x0100, 0x0100,
+		"Samsung", "MP3 Player",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /* Reported by Christian Leber <christian@leber.de> */
 UNUSUAL_DEV(  0x0419, 0xaaf5, 0x0100, 0x0100,
 		"TrekStor",
@@ -132,6 +145,21 @@ UNUSUAL_DEV(  0x0420, 0x0001, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Mario Rettig <mariorettig@web.de> */
+UNUSUAL_DEV(  0x0421, 0x042e, 0x0100, 0x0100,
+		"Nokia",
+		"Nokia 3250",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
+/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
+ * Einar Th. Einarsson <einarthered@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x0444, 0x0100, 0x0100,
+		"Nokia",
+		"N91",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
 /* Reported by Jiri Slaby <jirislaby@gmail.com> and
  * Rene C. Castberg <Rene@Castberg.org> */
 UNUSUAL_DEV(  0x0421, 0x0446, 0x0100, 0x0100,
@@ -140,6 +168,13 @@ UNUSUAL_DEV(  0x0421, 0x0446, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 
+/* Reported by Matthew Bloch <matthew@bytemark.co.uk> */
+UNUSUAL_DEV(  0x0421, 0x044e, 0x0100, 0x0100,
+		"Nokia",
+		"E61",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
 /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
 UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
 		"SMSC",
@@ -206,16 +241,6 @@ UNUSUAL_DEV(  0x0482, 0x0103, 0x0100, 0x0100,
 		"Finecam S5",
 		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
 
-/* Patch for Kyocera Finecam L3
- * Submitted by Michael Krauth <michael.krauth@web.de>
- * and Alessandro Fracchetti <al.fracchetti@tin.it>
- */
-UNUSUAL_DEV(  0x0482, 0x0105, 0x0100, 0x0100,
-		"Kyocera",
-		"Finecam L3",
-		US_SC_SCSI, US_PR_BULK, NULL,
-		US_FL_FIX_INQUIRY),
-
 /* Reported by Paul Stewart <stewart@wetlogic.net>
  * This entry is needed because the device reports Sub=ff */
 UNUSUAL_DEV(  0x04a4, 0x0004, 0x0001, 0x0001,
@@ -473,10 +498,11 @@ UNUSUAL_DEV(  0x054c, 0x0010, 0x0106, 0x0450,
 		US_SC_SCSI, US_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
 
-/* This entry is needed because the device reports Sub=ff */
-UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0600,
+/* Submitted by Lars Jacob <jacob.lars@googlemail.com>
+ * This entry is needed because the device reports Sub=ff */
+UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0610,
 		"Sony",
-		"DSC-T1/T5",
+		"DSC-T1/T5/H5",
 		US_SC_8070, US_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
@@ -563,6 +589,13 @@ UNUSUAL_DEV(  0x054c, 0x0099, 0x0000, 0x9999,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_INQUIRY ),
 
+/* floppy reports multiple luns */
+UNUSUAL_DEV(  0x055d, 0x2020, 0x0000, 0x0210,
+               "SAMSUNG",
+               "SFD-321U [FW 0C]",
+               US_SC_DEVICE, US_PR_DEVICE, NULL,
+               US_FL_SINGLE_LUN ),
+
 		
 UNUSUAL_DEV(  0x057b, 0x0000, 0x0000, 0x0299, 
 		"Y-E Data",
@@ -598,18 +631,6 @@ UNUSUAL_DEV(  0x0595, 0x4343, 0x0000, 0x2210,
 		"Digital Camera EX-20 DSC",
 		US_SC_8070, US_PR_DEVICE, NULL, 0 ),
 
-/* The entry was here before I took over, and had US_SC_RBC. It turns
- * out that isn't needed. Additionally, Torsten Eriksson
- * <Torsten.Eriksson@bergianska.se> is able to use his device fine
- * without this entry at all - but I don't suspect that will be true
- * for all users (the protocol is likely needed), so is staying at
- * this time. - Phil Dibowitz <phil@ipom.com>
- */
-UNUSUAL_DEV(  0x059f, 0xa601, 0x0200, 0x0200, 
-		"LaCie",
-		"USB Hard Disk",
-		US_SC_DEVICE, US_PR_CB, NULL, 0 ),
-
 /* Submitted by Joel Bourquard <numlock@freesurf.ch>
  * Some versions of this device need the SubClass and Protocol overrides
  * while others don't.
@@ -708,18 +729,22 @@ UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
  * They were originally reported by Alexander Oltu
  * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com>
  * respectively.
+ *
+ * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz
+ * <phil@ipom.com> as these flags were made and hard-coded
+ * special-cases were pulled from scsiglue.c.
  */
 UNUSUAL_DEV(  0x05e3, 0x0701, 0x0000, 0xffff,
 		"Genesys Logic",
 		"USB to IDE Optical",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_GO_SLOW ),
+		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
 
 UNUSUAL_DEV(  0x05e3, 0x0702, 0x0000, 0xffff,
 		"Genesys Logic",
 		"USB to IDE Disk",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_GO_SLOW ),
+		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
 
 /* Reported by Hanno Boeck <hanno@gmx.de>
  * Taken from the Lycoris Kernel */
@@ -1073,7 +1098,15 @@ UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff,
                 "Optio S/S4",
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_INQUIRY ),
-		
+
+/* This is a virtual windows driver CD, which the zd1211rw driver automatically
+ * converts into a WLAN device. */
+UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
+                "ZyXEL",
+                "G-220F USB-WLAN Install",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_DEVICE ),
+
 #ifdef CONFIG_USB_STORAGE_ISD200
 UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
 		"ATI",
@@ -1196,6 +1229,24 @@ UNUSUAL_DEV(  0x0ea0, 0x6828, 0x0110, 0x0110,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Benjamin Schiller <sbenni@gmx.de>
+ * It is also sold by Easylite as DJ 20 */
+UNUSUAL_DEV(  0x0ed1, 0x7636, 0x0103, 0x0103,
+		"Typhoon",
+		"My DJ 1820",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
+
+/* David Kuehling <dvdkhlng@gmx.de>:
+ * for MP3-Player AVOX WSX-300ER (bought in Japan).  Reports lots of SCSI
+ * errors when trying to write.
+ */
+UNUSUAL_DEV(  0x0f19, 0x0105, 0x0100, 0x0100,
+		"C-MEX",
+		"A-VOX",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /* Reported by Michael Stattmann <michael@stattmann.com> */
 UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
 		"Sony Ericsson",
@@ -1203,11 +1254,18 @@ UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT ),
 
+/* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
+UNUSUAL_DEV(  0x0fce, 0xe031, 0x0000, 0x0000,
+		"Sony Ericsson",
+		"M600i",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
  * Tested on hardware version 1.10.
  * Entry is needed only for the initializer function override.
  */
-UNUSUAL_DEV(  0x1019, 0x0c55, 0x0000, 0x9999,
+UNUSUAL_DEV(  0x1019, 0x0c55, 0x0110, 0x0110,
 		"Desknote",
 		"UCR-61S2B",
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
@@ -1227,6 +1285,15 @@ UNUSUAL_DEV(  0x1370, 0x6828, 0x0110, 0x0110,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
+ * and Renato Perini <rperini@email.it>
+ */
+UNUSUAL_DEV(  0x22b8, 0x3010, 0x0001, 0x0001,
+		"Motorola",
+		"RAZR V3x",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
+
 /* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
 UNUSUAL_DEV(  0x2735, 0x100b, 0x0000, 0x9999,
 		"MPIO",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 1185acac4b21..8d7bdcb5924d 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -55,6 +55,7 @@
 #include <linux/slab.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
+#include <linux/utsrelease.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
@@ -373,8 +374,12 @@ static int usb_stor_control_thread(void * __us)
 		/* lock access to the state */
 		scsi_lock(host);
 
+		/* did the command already complete because of a disconnect? */
+		if (!us->srb)
+			;		/* nothing to do */
+
 		/* indicate that the command is done */
-		if (us->srb->result != DID_ABORT << 16) {
+		else if (us->srb->result != DID_ABORT << 16) {
 			US_DEBUGP("scsi cmd done, result=0x%x\n", 
 				   us->srb->result);
 			us->srb->scsi_done(us->srb);
@@ -478,7 +483,7 @@ static struct us_unusual_dev *find_unusual(const struct usb_device_id *id)
 }
 
 /* Get the unusual_devs entries and the string descriptors */
-static void get_device_info(struct us_data *us, const struct usb_device_id *id)
+static int get_device_info(struct us_data *us, const struct usb_device_id *id)
 {
 	struct usb_device *dev = us->pusb_dev;
 	struct usb_interface_descriptor *idesc =
@@ -495,6 +500,11 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id)
 			unusual_dev->useTransport;
 	us->flags = USB_US_ORIG_FLAGS(id->driver_info);
 
+	if (us->flags & US_FL_IGNORE_DEVICE) {
+		printk(KERN_INFO USB_STORAGE "device ignored\n");
+		return -ENODEV;
+	}
+
 	/*
 	 * This flag is only needed when we're in high-speed, so let's
 	 * disable it if we're in full-speed
@@ -524,7 +534,8 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id)
 		if (msg >= 0 && !(us->flags & US_FL_NEED_OVERRIDE))
 			printk(KERN_NOTICE USB_STORAGE "This device "
 				"(%04x,%04x,%04x S %02x P %02x)"
-				" has %s in unusual_devs.h\n"
+				" has %s in unusual_devs.h (kernel"
+				" %s)\n"
 				"   Please send a copy of this message to "
 				"<linux-usb-devel@lists.sourceforge.net>\n",
 				le16_to_cpu(ddesc->idVendor),
@@ -532,8 +543,11 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id)
 				le16_to_cpu(ddesc->bcdDevice),
 				idesc->bInterfaceSubClass,
 				idesc->bInterfaceProtocol,
-				msgs[msg]);
+				msgs[msg],
+				UTS_RELEASE);
 	}
+
+	return 0;
 }
 
 /* Get the transport settings */
@@ -836,32 +850,34 @@ static void dissociate_dev(struct us_data *us)
  * the host */
 static void quiesce_and_remove_host(struct us_data *us)
 {
+	struct Scsi_Host *host = us_to_host(us);
+
 	/* Prevent new USB transfers, stop the current command, and
 	 * interrupt a SCSI-scan or device-reset delay */
+	scsi_lock(host);
 	set_bit(US_FLIDX_DISCONNECTING, &us->flags);
+	scsi_unlock(host);
 	usb_stor_stop_transport(us);
 	wake_up(&us->delay_wait);
 
 	/* It doesn't matter if the SCSI-scanning thread is still running.
 	 * The thread will exit when it sees the DISCONNECTING flag. */
 
-	/* Wait for the current command to finish, then remove the host */
-	mutex_lock(&us->dev_mutex);
-	mutex_unlock(&us->dev_mutex);
-
 	/* queuecommand won't accept any new commands and the control
 	 * thread won't execute a previously-queued command.  If there
 	 * is such a command pending, complete it with an error. */
+	mutex_lock(&us->dev_mutex);
 	if (us->srb) {
 		us->srb->result = DID_NO_CONNECT << 16;
-		scsi_lock(us_to_host(us));
+		scsi_lock(host);
 		us->srb->scsi_done(us->srb);
 		us->srb = NULL;
-		scsi_unlock(us_to_host(us));
+		scsi_unlock(host);
 	}
+	mutex_unlock(&us->dev_mutex);
 
 	/* Now we own no commands so it's safe to remove the SCSI host */
-	scsi_remove_host(us_to_host(us));
+	scsi_remove_host(host);
 }
 
 /* Second stage of disconnect processing: deallocate all resources */
@@ -960,7 +976,9 @@ static int storage_probe(struct usb_interface *intf,
 	 * of the match from the usb_device_id table, so we can find the
 	 * corresponding entry in the private table.
 	 */
-	get_device_info(us, id);
+	result = get_device_info(us, id);
+	if (result)
+		goto BadDevice;
 
 	/* Get the transport, protocol, and pipe settings */
 	result = get_transport(us);
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 5284abe1b5eb..21f3ddbc9080 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -176,8 +176,4 @@ extern void fill_inquiry_response(struct us_data *us,
 #define scsi_unlock(host)	spin_unlock_irq(host->host_lock)
 #define scsi_lock(host)		spin_lock_irq(host->host_lock)
 
-
-/* Vendor ID list for devices that require special handling */
-#define USB_VENDOR_ID_GENESYS		0x05e3	/* Genesys Logic */
-
 #endif