Merge branch 'fixes' into for-linus

Conflicts:

	arch/arm/mach-versatile/core.c

40 files changed, 332 insertions, 446 deletions

diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index 07228721cafe..0da2c25bab3b 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -640,14 +640,13 @@ static void usbatm_cancel_send(struct usbatm_data *instance,
 
 	atm_dbg(instance, "%s entered\n", __func__);
 	spin_lock_irq(&instance->sndqueue.lock);
-	for (skb = instance->sndqueue.next, n = skb->next;
-	     skb != (struct sk_buff *)&instance->sndqueue;
-	     skb = n, n = skb->next)
+	skb_queue_walk_safe(&instance->sndqueue, skb, n) {
 		if (UDSL_SKB(skb)->atm.vcc == vcc) {
 			atm_dbg(instance, "%s: popping skb 0x%p\n", __func__, skb);
 			__skb_unlink(skb, &instance->sndqueue);
 			usbatm_pop(vcc, skb);
 		}
+	}
 	spin_unlock_irq(&instance->sndqueue.lock);
 
 	tasklet_disable(&instance->tx_channel.tasklet);
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index db410e92c80d..77fa7a080801 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -97,7 +97,7 @@ enum {
 	Opt_err,
 };
 
-static match_table_t tokens = {
+static const match_table_t tokens = {
 	{Opt_devuid, "devuid=%u"},
 	{Opt_devgid, "devgid=%u"},
 	{Opt_devmode, "devmode=%o"},
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
index f9575c409124..9c32063a0c2f 100644
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ b/drivers/usb/host/ehci-ixp4xx.c
@@ -1,7 +1,7 @@
 /*
  * IXP4XX EHCI Host Controller Driver
  *
- * Author: Vladimir Barinov <vbarinov@ru.mvista.com>
+ * Author: Vladimir Barinov <vbarinov@embeddedalley.com>
  *
  * Based on "ehci-fsl.c" by Randy Vinson <rvinson@mvista.com>
  *
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 5799298364fb..b697a13364ec 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -210,143 +210,7 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
 
 /*-------------------------------------------------------------------------*/
 
-/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
-
-/* Section 2.2 Host Controller Capability Registers */
-struct ehci_caps {
-	/* these fields are specified as 8 and 16 bit registers,
-	 * but some hosts can't perform 8 or 16 bit PCI accesses.
-	 */
-	u32		hc_capbase;
-#define HC_LENGTH(p)		(((p)>>00)&0x00ff)	/* bits 7:0 */
-#define HC_VERSION(p)		(((p)>>16)&0xffff)	/* bits 31:16 */
-	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
-#define HCS_DEBUG_PORT(p)	(((p)>>20)&0xf)	/* bits 23:20, debug port? */
-#define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */
-#define HCS_N_CC(p)		(((p)>>12)&0xf)	/* bits 15:12, #companion HCs */
-#define HCS_N_PCC(p)		(((p)>>8)&0xf)	/* bits 11:8, ports per CC */
-#define HCS_PORTROUTED(p)	((p)&(1 << 7))	/* true: port routing */
-#define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
-#define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
-
-	u32		hcc_params;      /* HCCPARAMS - offset 0x8 */
-#define HCC_EXT_CAPS(p)		(((p)>>8)&0xff)	/* for pci extended caps */
-#define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
-#define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
-#define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
-#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
-#define HCC_64BIT_ADDR(p)       ((p)&(1))       /* true: can use 64-bit addr */
-	u8		portroute [8];	 /* nibbles for routing - offset 0xC */
-} __attribute__ ((packed));
-
-
-/* Section 2.3 Host Controller Operational Registers */
-struct ehci_regs {
-
-	/* USBCMD: offset 0x00 */
-	u32		command;
-/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
-#define CMD_PARK	(1<<11)		/* enable "park" on async qh */
-#define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
-#define CMD_LRESET	(1<<7)		/* partial reset (no ports, etc) */
-#define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
-#define CMD_ASE		(1<<5)		/* async schedule enable */
-#define CMD_PSE		(1<<4)		/* periodic schedule enable */
-/* 3:2 is periodic frame list size */
-#define CMD_RESET	(1<<1)		/* reset HC not bus */
-#define CMD_RUN		(1<<0)		/* start/stop HC */
-
-	/* USBSTS: offset 0x04 */
-	u32		status;
-#define STS_ASS		(1<<15)		/* Async Schedule Status */
-#define STS_PSS		(1<<14)		/* Periodic Schedule Status */
-#define STS_RECL	(1<<13)		/* Reclamation */
-#define STS_HALT	(1<<12)		/* Not running (any reason) */
-/* some bits reserved */
-	/* these STS_* flags are also intr_enable bits (USBINTR) */
-#define STS_IAA		(1<<5)		/* Interrupted on async advance */
-#define STS_FATAL	(1<<4)		/* such as some PCI access errors */
-#define STS_FLR		(1<<3)		/* frame list rolled over */
-#define STS_PCD		(1<<2)		/* port change detect */
-#define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
-#define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
-
-	/* USBINTR: offset 0x08 */
-	u32		intr_enable;
-
-	/* FRINDEX: offset 0x0C */
-	u32		frame_index;	/* current microframe number */
-	/* CTRLDSSEGMENT: offset 0x10 */
-	u32		segment;	/* address bits 63:32 if needed */
-	/* PERIODICLISTBASE: offset 0x14 */
-	u32		frame_list;	/* points to periodic list */
-	/* ASYNCLISTADDR: offset 0x18 */
-	u32		async_next;	/* address of next async queue head */
-
-	u32		reserved [9];
-
-	/* CONFIGFLAG: offset 0x40 */
-	u32		configured_flag;
-#define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
-
-	/* PORTSC: offset 0x44 */
-	u32		port_status [0];	/* up to N_PORTS */
-/* 31:23 reserved */
-#define PORT_WKOC_E	(1<<22)		/* wake on overcurrent (enable) */
-#define PORT_WKDISC_E	(1<<21)		/* wake on disconnect (enable) */
-#define PORT_WKCONN_E	(1<<20)		/* wake on connect (enable) */
-/* 19:16 for port testing */
-#define PORT_LED_OFF	(0<<14)
-#define PORT_LED_AMBER	(1<<14)
-#define PORT_LED_GREEN	(2<<14)
-#define PORT_LED_MASK	(3<<14)
-#define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
-#define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
-#define PORT_USB11(x) (((x)&(3<<10))==(1<<10))	/* USB 1.1 device */
-/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
-/* 9 reserved */
-#define PORT_RESET	(1<<8)		/* reset port */
-#define PORT_SUSPEND	(1<<7)		/* suspend port */
-#define PORT_RESUME	(1<<6)		/* resume it */
-#define PORT_OCC	(1<<5)		/* over current change */
-#define PORT_OC		(1<<4)		/* over current active */
-#define PORT_PEC	(1<<3)		/* port enable change */
-#define PORT_PE		(1<<2)		/* port enable */
-#define PORT_CSC	(1<<1)		/* connect status change */
-#define PORT_CONNECT	(1<<0)		/* device connected */
-#define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
-} __attribute__ ((packed));
-
-#define USBMODE		0x68		/* USB Device mode */
-#define USBMODE_SDIS	(1<<3)		/* Stream disable */
-#define USBMODE_BE	(1<<2)		/* BE/LE endianness select */
-#define USBMODE_CM_HC	(3<<0)		/* host controller mode */
-#define USBMODE_CM_IDLE	(0<<0)		/* idle state */
-
-/* Appendix C, Debug port ... intended for use with special "debug devices"
- * that can help if there's no serial console.  (nonstandard enumeration.)
- */
-struct ehci_dbg_port {
-	u32	control;
-#define DBGP_OWNER	(1<<30)
-#define DBGP_ENABLED	(1<<28)
-#define DBGP_DONE	(1<<16)
-#define DBGP_INUSE	(1<<10)
-#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
-#	define DBGP_ERR_BAD	1
-#	define DBGP_ERR_SIGNAL	2
-#define DBGP_ERROR	(1<<6)
-#define DBGP_GO		(1<<5)
-#define DBGP_OUT	(1<<4)
-#define DBGP_LEN(x)	(((x)>>0)&0x0f)
-	u32	pids;
-#define DBGP_PID_GET(x)		(((x)>>16)&0xff)
-#define DBGP_PID_SET(data,tok)	(((data)<<8)|(tok))
-	u32	data03;
-	u32	data47;
-	u32	address;
-#define DBGP_EPADDR(dev,ep)	(((dev)<<8)|(ep))
-} __attribute__ ((packed));
+#include <linux/usb/ehci_def.h>
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 5da63f535005..516848dd9b48 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -112,7 +112,8 @@ static struct platform_device platform_dev = {
 	.num_resources		= ARRAY_SIZE(resources),
 };
 
-static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq)
+static int sl811_hc_init(struct device *parent, resource_size_t base_addr,
+			 int irq)
 {
 	if (platform_dev.dev.parent)
 		return -EBUSY;
@@ -155,97 +156,72 @@ static void sl811_cs_release(struct pcmcia_device * link)
 	platform_device_unregister(&platform_dev);
 }
 
+static int sl811_cs_config_check(struct pcmcia_device *p_dev,
+				 cistpl_cftable_entry_t *cfg,
+				 cistpl_cftable_entry_t *dflt,
+				 unsigned int vcc,
+				 void *priv_data)
+{
+	if (cfg->index == 0)
+		return -ENODEV;
+
+	/* Use power settings for Vcc and Vpp if present */
+	/*  Note that the CIS values need to be rescaled */
+	if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+		if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc)
+			return -ENODEV;
+	} else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+		if (dflt->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc)
+			return -ENODEV;
+		}
+
+	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp =
+			cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp =
+			dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+	/* we need an interrupt */
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+	/* IO window settings */
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+
+		return pcmcia_request_io(p_dev, &p_dev->io);
+	}
+	pcmcia_disable_device(p_dev);
+	return -ENODEV;
+}
+
+
 static int sl811_cs_config(struct pcmcia_device *link)
 {
 	struct device		*parent = &handle_to_dev(link);
 	local_info_t		*dev = link->priv;
-	tuple_t			tuple;
-	cisparse_t		parse;
 	int			last_fn, last_ret;
-	u_char			buf[64];
-	config_info_t		conf;
-	cistpl_cftable_entry_t	dflt = { 0 };
 
 	DBG(0, "sl811_cs_config(0x%p)\n", link);
 
-	/* Look up the current Vcc */
-	CS_CHECK(GetConfigurationInfo,
-			pcmcia_get_configuration_info(link, &conf));
-
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-	while (1) {
-		cistpl_cftable_entry_t	*cfg = &(parse.cftable_entry);
-
-		if (pcmcia_get_tuple_data(link, &tuple) != 0
-				|| pcmcia_parse_tuple(link, &tuple, &parse)
-						!= 0)
-			goto next_entry;
-
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT) {
-			dflt = *cfg;
-		}
-
-		if (cfg->index == 0)
-			goto next_entry;
-
-		link->conf.ConfigIndex = cfg->index;
-
-		/* Use power settings for Vcc and Vpp if present */
-		/*  Note that the CIS values need to be rescaled */
-		if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
-			if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000
-					!= conf.Vcc)
-				goto next_entry;
-		} else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
-			if (dflt.vcc.param[CISTPL_POWER_VNOM]/10000
-					!= conf.Vcc)
-				goto next_entry;
-		}
-
-		if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-			link->conf.Vpp =
-				cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-		else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-			link->conf.Vpp =
-				dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-
-		/* we need an interrupt */
-		if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-			link->conf.Attributes |= CONF_ENABLE_IRQ;
-
-		/* IO window settings */
-		link->io.NumPorts1 = link->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-
-			link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-			link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-			link->io.BasePort1 = io->win[0].base;
-			link->io.NumPorts1 = io->win[0].len;
-
-			if (pcmcia_request_io(link, &link->io) != 0)
-				goto next_entry;
-		}
-		break;
-
-next_entry:
-		pcmcia_disable_device(link);
-		last_ret = pcmcia_get_next_tuple(link, &tuple);
-	}
+	if (pcmcia_loop_config(link, sl811_cs_config_check, NULL))
+		goto failed;
 
 	/* require an IRQ and two registers */
 	if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
-		goto cs_failed;
+		goto failed;
 	if (link->conf.Attributes & CONF_ENABLE_IRQ)
 		CS_CHECK(RequestIRQ,
 			pcmcia_request_irq(link, &link->irq));
 	else
-		goto cs_failed;
+		goto failed;
 
 	CS_CHECK(RequestConfiguration,
 		pcmcia_request_configuration(link, &link->conf));
@@ -266,8 +242,9 @@ next_entry:
 	if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ)
 			< 0) {
 cs_failed:
-		printk("sl811_cs_config failed\n");
 		cs_error(link, last_fn, last_ret);
+failed:
+		printk(KERN_WARNING "sl811_cs_config failed\n");
 		sl811_cs_release(link);
 		return  -ENODEV;
 	}
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 79ea98c66fa8..99fb7dc59c45 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -272,7 +272,7 @@ static void aircable_read(struct work_struct *work)
 	 * 64 bytes, to ensure I do not get throttled.
 	 * Ask USB mailing list for better aproach.
 	 */
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 
 	if (!tty) {
 		schedule_work(&priv->rx_work);
@@ -283,12 +283,13 @@ static void aircable_read(struct work_struct *work)
 	count = min(64, serial_buf_data_avail(priv->rx_buf));
 
 	if (count <= 0)
-		return; /* We have finished sending everything. */
+		goto out; /* We have finished sending everything. */
 
 	tty_prepare_flip_string(tty, &data, count);
 	if (!data) {
-		err("%s- kzalloc(%d) failed.", __func__, count);
-		return;
+		dev_err(&port->dev, "%s- kzalloc(%d) failed.",
+							__func__, count);
+		goto out;
 	}
 
 	serial_buf_get(priv->rx_buf, data, count);
@@ -297,7 +298,8 @@ static void aircable_read(struct work_struct *work)
 
 	if (serial_buf_data_avail(priv->rx_buf))
 		schedule_work(&priv->rx_work);
-
+out:		
+	tty_kref_put(tty);
 	return;
 }
 /* End of private methods */
@@ -495,7 +497,7 @@ static void aircable_read_bulk_callback(struct urb *urb)
 	usb_serial_debug_data(debug, &port->dev, __func__,
 				urb->actual_length, urb->transfer_buffer);
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		if (urb->actual_length <= 2) {
 			/* This is an incomplete package */
@@ -527,6 +529,7 @@ static void aircable_read_bulk_callback(struct urb *urb)
 		}
 		aircable_read(&priv->rx_work);
 	}
+	tty_kref_put(tty);
 
 	/* Schedule the next read _if_ we are still open */
 	if (port->port.count) {
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 2ebe06c3405a..1913bc7c5f0b 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -322,7 +322,7 @@ static void belkin_sa_read_int_callback(struct urb *urb)
 	 * to look in to this before committing any code.
 	 */
 	if (priv->last_lsr & BELKIN_SA_LSR_ERR) {
-		tty = port->port.tty;
+		tty = tty_port_tty_get(&port->port);
 		/* Overrun Error */
 		if (priv->last_lsr & BELKIN_SA_LSR_OE) {
 		}
@@ -335,6 +335,7 @@ static void belkin_sa_read_int_callback(struct urb *urb)
 		/* Break Indicator */
 		if (priv->last_lsr & BELKIN_SA_LSR_BI) {
 		}
+		tty_kref_put(tty);
 	}
 #endif
 	spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index e980766bb84b..5b20de130e08 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -117,7 +117,7 @@ static int usb_console_setup(struct console *co, char *options)
 	}
 
 	port = serial->port[0];
-	port->port.tty = NULL;
+	tty_port_tty_set(&port->port, NULL);
 
 	info->port = port;
 
@@ -143,7 +143,7 @@ static int usb_console_setup(struct console *co, char *options)
 			}
 			memset(&dummy, 0, sizeof(struct ktermios));
 			tty->termios = termios;
-			port->port.tty = tty;
+			tty_port_tty_set(&port->port, tty);
 		}
 
 		/* only call the device specific open if this
@@ -163,7 +163,7 @@ static int usb_console_setup(struct console *co, char *options)
 			tty_termios_encode_baud_rate(termios, baud, baud);
 			serial->type->set_termios(tty, port, &dummy);
 
-			port->port.tty = NULL;
+			tty_port_tty_set(&port->port, NULL);
 			kfree(termios);
 			kfree(tty);
 		}
@@ -176,7 +176,7 @@ out:
 	return retval;
 free_termios:
 	kfree(termios);
-	port->port.tty = NULL;
+	tty_port_tty_set(&port->port, NULL);
 free_tty:
 	kfree(tty);
 reset_open_count:
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index b4d72351cb96..94ef36c4764b 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -384,7 +384,7 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
 		return;
 	}
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (!tty) {
 		dbg("%s - ignoring since device not open\n", __func__);
 		return;
@@ -394,6 +394,7 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 	spin_lock(&priv->lock);
 
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 22837a3f2f89..f3514a91f915 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1286,7 +1286,7 @@ static void cypress_read_int_callback(struct urb *urb)
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (!tty) {
 		dbg("%s - bad tty pointer - exiting", __func__);
 		return;
@@ -1362,7 +1362,7 @@ static void cypress_read_int_callback(struct urb *urb)
 					data[i]);
 			tty_insert_flip_char(tty, data[i], tty_flag);
 		}
-		tty_flip_buffer_push(port->port.tty);
+		tty_flip_buffer_push(tty);
 	}
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -1371,6 +1371,7 @@ static void cypress_read_int_callback(struct urb *urb)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 continue_read:
+	tty_kref_put(tty);
 
 	/* Continue trying to always read... unless the port has closed. */
 
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 240aad1acaab..5756ac6d6c92 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -604,7 +604,9 @@ static void digi_wakeup_write_lock(struct work_struct *work)
 
 static void digi_wakeup_write(struct usb_serial_port *port)
 {
-	tty_wakeup(port->port.tty);
+	struct tty_struct *tty = tty_port_tty_get(&port->port);
+	tty_wakeup(tty);
+	tty_kref_put(tty);
 }
 
 
@@ -1668,7 +1670,7 @@ static int digi_read_inb_callback(struct urb *urb)
 {
 
 	struct usb_serial_port *port = urb->context;
-	struct tty_struct *tty = port->port.tty;
+	struct tty_struct *tty;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	int opcode = ((unsigned char *)urb->transfer_buffer)[0];
 	int len = ((unsigned char *)urb->transfer_buffer)[1];
@@ -1692,6 +1694,7 @@ static int digi_read_inb_callback(struct urb *urb)
 		return -1;
 	}
 
+	tty = tty_port_tty_get(&port->port);
 	spin_lock(&priv->dp_port_lock);
 
 	/* check for throttle; if set, do not resubmit read urb */
@@ -1735,6 +1738,7 @@ static int digi_read_inb_callback(struct urb *urb)
 		}
 	}
 	spin_unlock(&priv->dp_port_lock);
+	tty_kref_put(tty);
 
 	if (opcode == DIGI_CMD_RECEIVE_DISABLE)
 		dbg("%s: got RECEIVE_DISABLE", __func__);
@@ -1760,6 +1764,7 @@ static int digi_read_oob_callback(struct urb *urb)
 
 	struct usb_serial_port *port = urb->context;
 	struct usb_serial *serial = port->serial;
+	struct tty_struct *tty;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	int opcode, line, status, val;
 	int i;
@@ -1787,10 +1792,11 @@ static int digi_read_oob_callback(struct urb *urb)
 		if (priv == NULL)
 			return -1;
 
+		tty = tty_port_tty_get(&port->port);
 		rts = 0;
 		if (port->port.count)
-			rts = port->port.tty->termios->c_cflag & CRTSCTS;
-
+			rts = tty->termios->c_cflag & CRTSCTS;
+		
 		if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
 			spin_lock(&priv->dp_port_lock);
 			/* convert from digi flags to termiox flags */
@@ -1798,14 +1804,14 @@ static int digi_read_oob_callback(struct urb *urb)
 				priv->dp_modem_signals |= TIOCM_CTS;
 				/* port must be open to use tty struct */
 				if (rts) {
-					port->port.tty->hw_stopped = 0;
+					tty->hw_stopped = 0;
 					digi_wakeup_write(port);
 				}
 			} else {
 				priv->dp_modem_signals &= ~TIOCM_CTS;
 				/* port must be open to use tty struct */
 				if (rts)
-					port->port.tty->hw_stopped = 1;
+					tty->hw_stopped = 1;
 			}
 			if (val & DIGI_READ_INPUT_SIGNALS_DSR)
 				priv->dp_modem_signals |= TIOCM_DSR;
@@ -1830,6 +1836,7 @@ static int digi_read_oob_callback(struct urb *urb)
 		} else if (opcode == DIGI_CMD_IFLUSH_FIFO) {
 			wake_up_interruptible(&priv->dp_flush_wait);
 		}
+		tty_kref_put(tty);
 	}
 	return 0;
 
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index a6ab5b58d9ca..1072e847280f 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -33,9 +33,8 @@
  *	Moved MOD_DEC_USE_COUNT to end of empeg_close().
  *
  * (12/03/2000) gb
- *	Added port->port.tty->ldisc.set_termios(port->port.tty, NULL) to
- *	empeg_open(). This notifies the tty driver that the termios have
- *	changed.
+ *	Added tty->ldisc.set_termios(port, tty, NULL) to empeg_open().
+ *	This notifies the tty driver that the termios have changed.
  *
  * (11/13/2000) gb
  *	Moved tty->low_latency = 1 from empeg_read_bulk_callback() to
@@ -354,7 +353,7 @@ static void empeg_read_bulk_callback(struct urb *urb)
 
 	usb_serial_debug_data(debug, &port->dev, __func__,
 						urb->actual_length, data);
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 
 	if (urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
@@ -362,6 +361,7 @@ static void empeg_read_bulk_callback(struct urb *urb)
 		tty_flip_buffer_push(tty);
 		bytes_in += urb->actual_length;
 	}
+	tty_kref_put(tty);
 
 	/* Continue trying to always read  */
 	usb_fill_bulk_urb(
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 3dc93b542b30..c2ac129557aa 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -860,7 +860,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
 
 	kfree(buf);
 	if (rv < 0) {
-		err("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
+		dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
 				__func__,
 				(set & TIOCM_DTR) ? "HIGH" :
 				(clear & TIOCM_DTR) ? "LOW" : "unchanged",
@@ -1808,7 +1808,7 @@ static void ftdi_read_bulk_callback(struct urb *urb)
 	if (port->port.count <= 0)
 		return;
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (!tty) {
 		dbg("%s - bad tty pointer - exiting", __func__);
 		return;
@@ -1817,7 +1817,7 @@ static void ftdi_read_bulk_callback(struct urb *urb)
 	priv = usb_get_serial_port_data(port);
 	if (!priv) {
 		dbg("%s - bad port private data pointer - exiting", __func__);
-		return;
+		goto out;
 	}
 
 	if (urb != port->read_urb)
@@ -1827,7 +1827,7 @@ static void ftdi_read_bulk_callback(struct urb *urb)
 		/* This will happen at close every time so it is a dbg not an
 		   err */
 		dbg("(this is ok on close) nonzero read bulk status received: %d", status);
-		return;
+		goto out;
 	}
 
 	/* count data bytes, but not status bytes */
@@ -1838,7 +1838,8 @@ static void ftdi_read_bulk_callback(struct urb *urb)
 	spin_unlock_irqrestore(&priv->rx_lock, flags);
 
 	ftdi_process_read(&priv->rx_work.work);
-
+out:
+	tty_kref_put(tty);
 } /* ftdi_read_bulk_callback */
 
 
@@ -1863,7 +1864,7 @@ static void ftdi_process_read(struct work_struct *work)
 	if (port->port.count <= 0)
 		return;
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (!tty) {
 		dbg("%s - bad tty pointer - exiting", __func__);
 		return;
@@ -1872,13 +1873,13 @@ static void ftdi_process_read(struct work_struct *work)
 	priv = usb_get_serial_port_data(port);
 	if (!priv) {
 		dbg("%s - bad port private data pointer - exiting", __func__);
-		return;
+		goto out;
 	}
 
 	urb = port->read_urb;
 	if (!urb) {
 		dbg("%s - bad read_urb pointer - exiting", __func__);
-		return;
+		goto out;
 	}
 
 	data = urb->transfer_buffer;
@@ -2020,7 +2021,7 @@ static void ftdi_process_read(struct work_struct *work)
 			schedule_delayed_work(&priv->rx_work, 1);
 		else
 			dbg("%s - port is closed", __func__);
-		return;
+		goto out;
 	}
 
 	/* urb is completely processed */
@@ -2041,6 +2042,8 @@ static void ftdi_process_read(struct work_struct *work)
 			err("%s - failed resubmitting read urb, error %d",
 							__func__, result);
 	}
+out:
+	tty_kref_put(tty);
 } /* ftdi_process_read */
 
 
@@ -2256,7 +2259,7 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
 			   0, 0,
 			   buf, 1, WDR_TIMEOUT);
 		if (ret < 0) {
-			err("%s Could not get modem status of device - err: %d", __func__,
+			dbg("%s Could not get modem status of device - err: %d", __func__,
 			    ret);
 			return ret;
 		}
@@ -2275,7 +2278,7 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
 				   0, priv->interface,
 				   buf, 2, WDR_TIMEOUT);
 		if (ret < 0) {
-			err("%s Could not get modem status of device - err: %d", __func__,
+			dbg("%s Could not get modem status of device - err: %d", __func__,
 			    ret);
 			return ret;
 		}
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index d95382088075..2ad0569bcf19 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -276,7 +276,7 @@ static inline int isAbortTrfCmnd(const unsigned char *buf)
 static void send_to_tty(struct usb_serial_port *port,
 			char *data, unsigned int actual_length)
 {
-	struct tty_struct *tty = port->port.tty;
+	struct tty_struct *tty = tty_port_tty_get(&port->port);
 
 	if (tty && actual_length) {
 
@@ -287,6 +287,7 @@ static void send_to_tty(struct usb_serial_port *port,
 		tty_insert_flip_string(tty, data, actual_length);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 }
 
 
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index fe84c88ec20c..814909f1ee63 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -330,7 +330,7 @@ static void resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
 static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
 {
 	struct urb *urb = port->read_urb;
-	struct tty_struct *tty = port->port.tty;
+	struct tty_struct *tty = tty_port_tty_get(&port->port);
 	int room;
 
 	/* Push data to tty */
@@ -341,6 +341,7 @@ static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
 			tty_flip_buffer_push(tty);
 		}
 	}
+	tty_kref_put(tty);
 
 	resubmit_read_urb(port, GFP_ATOMIC);
 }
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index bfa508ddb0fe..611f97fd62f1 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -600,6 +600,7 @@ static void edge_interrupt_callback(struct urb *urb)
 	struct edgeport_serial	*edge_serial = urb->context;
 	struct edgeport_port *edge_port;
 	struct usb_serial_port *port;
+	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
 	int length = urb->actual_length;
 	int bytes_avail;
@@ -675,9 +676,12 @@ static void edge_interrupt_callback(struct urb *urb)
 
 					/* tell the tty driver that something
 					   has changed */
-					if (edge_port->port->port.tty)
-						tty_wakeup(edge_port->port->port.tty);
-
+					tty = tty_port_tty_get(
+						&edge_port->port->port);
+					if (tty) {
+						tty_wakeup(tty);
+						tty_kref_put(tty);
+					}
 					/* Since we have more credit, check
 					   if more data can be sent */
 					send_more_port_data(edge_serial,
@@ -778,13 +782,14 @@ static void edge_bulk_out_data_callback(struct urb *urb)
 		    __func__, status);
 	}
 
-	tty = edge_port->port->port.tty;
+	tty = tty_port_tty_get(&edge_port->port->port);
 
 	if (tty && edge_port->open) {
 		/* let the tty driver wakeup if it has a special
 		   write_wakeup function */
 		tty_wakeup(tty);
 	}
+	tty_kref_put(tty);
 
 	/* Release the Write URB */
 	edge_port->write_in_progress = false;
@@ -826,11 +831,12 @@ static void edge_bulk_out_cmd_callback(struct urb *urb)
 	}
 
 	/* Get pointer to tty */
-	tty = edge_port->port->port.tty;
+	tty = tty_port_tty_get(&edge_port->port->port);
 
 	/* tell the tty driver that something has changed */
 	if (tty && edge_port->open)
 		tty_wakeup(tty);
+	tty_kref_put(tty);
 
 	/* we have completed the command */
 	edge_port->commandPending = false;
@@ -1932,11 +1938,13 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial,
 							edge_serial->rxPort];
 				edge_port = usb_get_serial_port_data(port);
 				if (edge_port->open) {
-					tty = edge_port->port->port.tty;
+					tty = tty_port_tty_get(
+						&edge_port->port->port);
 					if (tty) {
 						dbg("%s - Sending %d bytes to TTY for port %d",
 							__func__, rxLen, edge_serial->rxPort);
 						edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
+						tty_kref_put(tty);
 					}
 					edge_port->icount.rx += rxLen;
 				}
@@ -1971,6 +1979,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 {
 	struct usb_serial_port *port;
 	struct edgeport_port *edge_port;
+	struct tty_struct *tty;
 	__u8 code = edge_serial->rxStatusCode;
 
 	/* switch the port pointer to the one being currently talked about */
@@ -2020,10 +2029,12 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 
 		/* send the current line settings to the port so we are
 		   in sync with any further termios calls */
-		/* FIXME: locking on tty */
-		if (edge_port->port->port.tty)
-			change_port_settings(edge_port->port->port.tty,
-				edge_port, edge_port->port->port.tty->termios);
+		tty = tty_port_tty_get(&edge_port->port->port);
+		if (tty) {
+			change_port_settings(tty,
+				edge_port, tty->termios);
+			tty_kref_put(tty);
+		}
 
 		/* we have completed the open */
 		edge_port->openPending = false;
@@ -2163,10 +2174,14 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
 	}
 
 	/* Place LSR data byte into Rx buffer */
-	if (lsrData && edge_port->port->port.tty)
-		edge_tty_recv(&edge_port->port->dev,
-					edge_port->port->port.tty, &data, 1);
-
+	if (lsrData) {
+		struct tty_struct *tty =
+				tty_port_tty_get(&edge_port->port->port);
+		if (tty) {
+			edge_tty_recv(&edge_port->port->dev, tty, &data, 1);
+			tty_kref_put(tty);
+		}
+	}
 	/* update input line counters */
 	icount = &edge_port->icount;
 	if (newLsr & LSR_BREAK)
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index cb4c54316cf5..541dd8e6e7a2 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -572,7 +572,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
 								int flush)
 {
 	int baud_rate;
-	struct tty_struct *tty = port->port->port.tty;
+	struct tty_struct *tty = tty_port_tty_get(&port->port->port);
 	wait_queue_t wait;
 	unsigned long flags;
 
@@ -599,6 +599,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
 	if (flush)
 		edge_buf_clear(port->ep_out_buf);
 	spin_unlock_irqrestore(&port->ep_lock, flags);
+	tty_kref_put(tty);
 
 	/* wait for data to drain from the device */
 	timeout += jiffies;
@@ -1554,7 +1555,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
 	/* Save the new modem status */
 	edge_port->shadow_msr = msr & 0xf0;
 
-	tty = edge_port->port->port.tty;
+	tty = tty_port_tty_get(&edge_port->port->port);
 	/* handle CTS flow control */
 	if (tty && C_CRTSCTS(tty)) {
 		if (msr & EDGEPORT_MSR_CTS) {
@@ -1564,6 +1565,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
 			tty->hw_stopped = 1;
 		}
 	}
+	tty_kref_put(tty);
 
 	return;
 }
@@ -1574,6 +1576,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
 	struct async_icount *icount;
 	__u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR |
 						LSR_FRM_ERR | LSR_BREAK));
+	struct tty_struct *tty;
 
 	dbg("%s - %02x", __func__, new_lsr);
 
@@ -1587,8 +1590,13 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
 		new_lsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
 
 	/* Place LSR data byte into Rx buffer */
-	if (lsr_data && edge_port->port->port.tty)
-		edge_tty_recv(&edge_port->port->dev, edge_port->port->port.tty, &data, 1);
+	if (lsr_data) {
+		tty = tty_port_tty_get(&edge_port->port->port);
+		if (tty) {
+			edge_tty_recv(&edge_port->port->dev, tty, &data, 1);
+			tty_kref_put(tty);
+		}
+	}
 
 	/* update input line counters */
 	icount = &edge_port->icount;
@@ -1749,7 +1757,7 @@ static void edge_bulk_in_callback(struct urb *urb)
 		++data;
 	}
 
-	tty = edge_port->port->port.tty;
+	tty = tty_port_tty_get(&edge_port->port->port);
 	if (tty && urb->actual_length) {
 		usb_serial_debug_data(debug, &edge_port->port->dev,
 					__func__, urb->actual_length, data);
@@ -1761,6 +1769,7 @@ static void edge_bulk_in_callback(struct urb *urb)
 							urb->actual_length);
 		edge_port->icount.rx += urb->actual_length;
 	}
+	tty_kref_put(tty);
 
 exit:
 	/* continue read unless stopped */
@@ -1796,6 +1805,7 @@ static void edge_bulk_out_callback(struct urb *urb)
 	struct usb_serial_port *port = urb->context;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	int status = urb->status;
+	struct tty_struct *tty;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -1818,7 +1828,9 @@ static void edge_bulk_out_callback(struct urb *urb)
 	}
 
 	/* send any buffered data */
-	edge_send(port->port.tty);
+	tty = tty_port_tty_get(&port->port);
+	edge_send(tty);
+	tty_kref_put(tty);
 }
 
 static int edge_open(struct tty_struct *tty,
@@ -1876,7 +1888,7 @@ static int edge_open(struct tty_struct *tty,
 
 	/* set up the port settings */
 	if (tty)
-		edge_set_termios(tty, port, port->port.tty->termios);
+		edge_set_termios(tty, port, tty->termios);
 
 	/* open up the port */
 
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index cd9a2e138c8b..2affa9c118b2 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -764,13 +764,14 @@ static void ipaq_read_bulk_callback(struct urb *urb)
 	usb_serial_debug_data(debug, &port->dev, __func__,
 						urb->actual_length, data);
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 		bytes_in += urb->actual_length;
 	}
+	tty_kref_put(tty);
 
 	/* Continue trying to always read  */
 	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index a842025b9b57..480cac27d646 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -170,12 +170,13 @@ static void ipw_read_bulk_callback(struct urb *urb)
 	usb_serial_debug_data(debug, &port->dev, __func__,
 					urb->actual_length, data);
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 	/* Continue trying to always read  */
 	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index e59155c6607d..45d4043e04ab 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -465,11 +465,12 @@ static void ir_read_bulk_callback(struct urb *urb)
 			ir_baud = *data & 0x0f;
 		usb_serial_debug_data(debug, &port->dev, __func__,
 						urb->actual_length, data);
- 		tty = port->port.tty;
+		tty = tty_port_tty_get(&port->port);
 		if (tty_buffer_request_room(tty, urb->actual_length - 1)) {
 			tty_insert_flip_string(tty, data+1, urb->actual_length - 1);
 			tty_flip_buffer_push(tty);
 		}
+		tty_kref_put(tty);
 
 		/*
 		 * No break here.
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index ddff37fa6339..53710aa7eadd 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -629,13 +629,14 @@ static void read_buf_callback(struct urb *urb)
 	}
 
 	dbg("%s - %i chars to write", __func__, urb->actual_length);
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (data == NULL)
 		dbg("%s - data is NULL !!!", __func__);
 	if (tty && urb->actual_length && data) {
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 	iuu_led_activity_on(urb);
 }
 
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 704716f6f6d3..15447af48691 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -430,7 +430,7 @@ static void	usa26_indat_callback(struct urb *urb)
 	}
 
 	port =  urb->context;
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		/* 0x80 bit is error flag */
 		if ((data[0] & 0x80) == 0) {
@@ -459,6 +459,7 @@ static void	usa26_indat_callback(struct urb *urb)
 		}
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 	/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
@@ -513,6 +514,7 @@ static void	usa26_instat_callback(struct urb *urb)
 	struct usb_serial			*serial;
 	struct usb_serial_port			*port;
 	struct keyspan_port_private	 	*p_priv;
+	struct tty_struct			*tty;
 	int old_dcd_state, err;
 	int status = urb->status;
 
@@ -553,12 +555,11 @@ static void	usa26_instat_callback(struct urb *urb)
 	p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
 	p_priv->ri_state = ((msg->ri) ? 1 : 0);
 
-	if (port->port.tty && !C_CLOCAL(port->port.tty)
-	    && old_dcd_state != p_priv->dcd_state) {
-		if (old_dcd_state)
-			tty_hangup(port->port.tty);
-		/*  else */
-		/*	wake_up_interruptible(&p_priv->open_wait); */
+	if (old_dcd_state != p_priv->dcd_state) {
+		tty = tty_port_tty_get(&port->port);
+		if (tty && !C_CLOCAL(tty))
+			tty_hangup(tty);
+		tty_kref_put(tty);
 	}
 
 	/* Resubmit urb so we continue receiving */
@@ -604,11 +605,12 @@ static void usa28_indat_callback(struct urb *urb)
 		p_priv = usb_get_serial_port_data(port);
 		data = urb->transfer_buffer;
 
-		tty = port->port.tty;
-		if (urb->actual_length) {
+		tty =tty_port_tty_get(&port->port);
+		if (tty && urb->actual_length) {
 			tty_insert_flip_string(tty, data, urb->actual_length);
 			tty_flip_buffer_push(tty);
 		}
+		tty_kref_put(tty);
 
 		/* Resubmit urb so we continue receiving */
 		urb->dev = port->serial->dev;
@@ -652,6 +654,7 @@ static void	usa28_instat_callback(struct urb *urb)
 	struct usb_serial			*serial;
 	struct usb_serial_port			*port;
 	struct keyspan_port_private	 	*p_priv;
+	struct tty_struct			*tty;
 	int old_dcd_state;
 	int status = urb->status;
 
@@ -689,12 +692,11 @@ static void	usa28_instat_callback(struct urb *urb)
 	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
 	p_priv->ri_state = ((msg->ri) ? 1 : 0);
 
-	if (port->port.tty && !C_CLOCAL(port->port.tty)
-	    && old_dcd_state != p_priv->dcd_state) {
-		if (old_dcd_state)
-			tty_hangup(port->port.tty);
-		/*  else */
-		/*	wake_up_interruptible(&p_priv->open_wait); */
+	if( old_dcd_state != p_priv->dcd_state && old_dcd_state) {
+		tty = tty_port_tty_get(&port->port);
+		if (tty && !C_CLOCAL(tty)) 
+			tty_hangup(tty);
+		tty_kref_put(tty);
 	}
 
 		/* Resubmit urb so we continue receiving */
@@ -785,12 +787,11 @@ static void	usa49_instat_callback(struct urb *urb)
 	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
 	p_priv->ri_state = ((msg->ri) ? 1 : 0);
 
-	if (port->port.tty && !C_CLOCAL(port->port.tty)
-	    && old_dcd_state != p_priv->dcd_state) {
-		if (old_dcd_state)
-			tty_hangup(port->port.tty);
-		/*  else */
-		/*	wake_up_interruptible(&p_priv->open_wait); */
+	if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
+		struct tty_struct *tty = tty_port_tty_get(&port->port);
+		if (tty && !C_CLOCAL(tty))
+			tty_hangup(tty);
+		tty_kref_put(tty);
 	}
 
 	/* Resubmit urb so we continue receiving */
@@ -827,7 +828,7 @@ static void	usa49_indat_callback(struct urb *urb)
 	}
 
 	port =  urb->context;
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		/* 0x80 bit is error flag */
 		if ((data[0] & 0x80) == 0) {
@@ -850,6 +851,7 @@ static void	usa49_indat_callback(struct urb *urb)
 		}
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 	/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
@@ -893,7 +895,7 @@ static void usa49wg_indat_callback(struct urb *urb)
 				return;
 			}
 			port = serial->port[data[i++]];
-			tty = port->port.tty;
+			tty = tty_port_tty_get(&port->port);
 			len = data[i++];
 
 			/* 0x80 bit is error flag */
@@ -927,6 +929,7 @@ static void usa49wg_indat_callback(struct urb *urb)
 			}
 			if (port->port.count)
 				tty_flip_buffer_push(tty);
+			tty_kref_put(tty);
 		}
 	}
 
@@ -967,8 +970,8 @@ static void usa90_indat_callback(struct urb *urb)
 	port =  urb->context;
 	p_priv = usb_get_serial_port_data(port);
 
-	tty = port->port.tty;
 	if (urb->actual_length) {
+		tty = tty_port_tty_get(&port->port);
 		/* if current mode is DMA, looks like usa28 format
 		   otherwise looks like usa26 data format */
 
@@ -1004,6 +1007,7 @@ static void usa90_indat_callback(struct urb *urb)
 			}
 		}
 		tty_flip_buffer_push(tty);
+		tty_kref_put(tty);
 	}
 
 	/* Resubmit urb so we continue receiving */
@@ -1025,6 +1029,7 @@ static void	usa90_instat_callback(struct urb *urb)
 	struct usb_serial			*serial;
 	struct usb_serial_port			*port;
 	struct keyspan_port_private	 	*p_priv;
+	struct tty_struct			*tty;
 	int old_dcd_state, err;
 	int status = urb->status;
 
@@ -1053,12 +1058,11 @@ static void	usa90_instat_callback(struct urb *urb)
 	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
 	p_priv->ri_state = ((msg->ri) ? 1 : 0);
 
-	if (port->port.tty && !C_CLOCAL(port->port.tty)
-	    && old_dcd_state != p_priv->dcd_state) {
-		if (old_dcd_state)
-			tty_hangup(port->port.tty);
-		/*  else */
-		/*	wake_up_interruptible(&p_priv->open_wait); */
+	if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
+		tty = tty_port_tty_get(&port->port);
+		if (tty && !C_CLOCAL(tty))
+			tty_hangup(tty);
+		tty_kref_put(tty);
 	}
 
 	/* Resubmit urb so we continue receiving */
@@ -1130,12 +1134,11 @@ static void	usa67_instat_callback(struct urb *urb)
 	p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
 	p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
 
-	if (port->port.tty && !C_CLOCAL(port->port.tty)
-	    && old_dcd_state != p_priv->dcd_state) {
-		if (old_dcd_state)
-			tty_hangup(port->port.tty);
-		/*  else */
-		/*	wake_up_interruptible(&p_priv->open_wait); */
+	if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
+		struct tty_struct *tty = tty_port_tty_get(&port->port);
+		if (tty && !C_CLOCAL(tty))
+			tty_hangup(tty);
+		tty_kref_put(tty);
 	}
 
 	/* Resubmit urb so we continue receiving */
@@ -1332,7 +1335,7 @@ static void keyspan_close(struct tty_struct *tty,
 			stop_urb(p_priv->out_urbs[i]);
 		}
 	}
-	port->port.tty = NULL;
+	tty_port_tty_set(&port->port, NULL);
 }
 
 /* download the firmware to a pre-renumeration device */
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 040040a267d9..99e9a14c5bf6 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -172,8 +172,9 @@ static void keyspan_pda_wakeup_write(struct work_struct *work)
 	struct keyspan_pda_private *priv =
 		container_of(work, struct keyspan_pda_private, wakeup_work);
 	struct usb_serial_port *port = priv->port;
-
-	tty_wakeup(port->port.tty);
+	struct tty_struct *tty = tty_port_tty_get(&port->port);
+	tty_wakeup(tty);
+	tty_kref_put(tty);
 }
 
 static void keyspan_pda_request_unthrottle(struct work_struct *work)
@@ -205,7 +206,7 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
 static void keyspan_pda_rx_interrupt(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	struct tty_struct *tty = port->port.tty;
+	struct tty_struct *tty = tty_port_tty_get(&port->port);
 	unsigned char *data = urb->transfer_buffer;
 	int retval;
 	int status = urb->status;
@@ -222,7 +223,7 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
 		/* this urb is terminated, clean up */
 		dbg("%s - urb shutting down with status: %d",
 		    __func__, status);
-		return;
+		goto out;
 	default:
 		dbg("%s - nonzero urb status received: %d",
 		    __func__, status);
@@ -261,8 +262,11 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err("%s - usb_submit_urb failed with result %d",
-		     __func__, retval);
+		dev_err(&port->dev,
+			"%s - usb_submit_urb failed with result %d",
+			__func__, retval);
+out:
+	tty_kref_put(tty);		     
 }
 
 
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index b84dddc71124..ff3a07f5102f 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -658,7 +658,7 @@ static void klsi_105_read_bulk_callback(struct urb *urb)
 	} else {
 		int bytes_sent = ((__u8 *) data)[0] +
 				 ((unsigned int) ((__u8 *) data)[1] << 8);
-		tty = port->port.tty;
+		tty = tty_port_tty_get(&port->port);
 		/* we should immediately resubmit the URB, before attempting
 		 * to pass the data on to the tty layer. But that needs locking
 		 * against re-entry an then mixed-up data because of
@@ -679,6 +679,7 @@ static void klsi_105_read_bulk_callback(struct urb *urb)
 		tty_buffer_request_room(tty, bytes_sent);
 		tty_insert_flip_string(tty, data + 2, bytes_sent);
 		tty_flip_buffer_push(tty);
+		tty_kref_put(tty);
 
 		/* again lockless, but debug info only */
 		priv->bytes_in += bytes_sent;
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index deba28ec77e8..cfcf37c2b957 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -383,7 +383,7 @@ static void kobil_read_int_callback(struct urb *urb)
 		return;
 	}
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (urb->actual_length) {
 
 		/* BEGIN DEBUG */
@@ -405,6 +405,7 @@ static void kobil_read_int_callback(struct urb *urb)
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 	/* someone sets the dev to 0 if the close method has been called */
 	port->interrupt_in_urb->dev = port->serial->dev;
 
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 0ded8bd6ec85..9b2cef81cde0 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -563,10 +563,11 @@ static void mct_u232_read_int_callback(struct urb *urb)
 	 * Work-a-round: handle the 'usual' bulk-in pipe here
 	 */
 	if (urb->transfer_buffer_length > 2) {
-		tty = port->port.tty;
+		tty = tty_port_tty_get(&port->port);
 		if (urb->actual_length) {
 			tty_insert_flip_string(tty, data, urb->actual_length);
 			tty_flip_buffer_push(tty);
+			tty_kref_put(tty);
 		}
 		goto exit;
 	}
@@ -591,7 +592,7 @@ static void mct_u232_read_int_callback(struct urb *urb)
 	 * to look in to this before committing any code.
 	 */
 	if (priv->last_lsr & MCT_U232_LSR_ERR) {
-		tty = port->port.tty;
+		tty = tty_port_tty_get(&port->port);
 		/* Overrun Error */
 		if (priv->last_lsr & MCT_U232_LSR_OE) {
 		}
@@ -604,6 +605,7 @@ static void mct_u232_read_int_callback(struct urb *urb)
 		/* Break Indicator */
 		if (priv->last_lsr & MCT_U232_LSR_BI) {
 		}
+		tty_kref_put(tty);
 	}
 #endif
 	spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 7c4917d77c0a..7b538caec37f 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -216,12 +216,13 @@ static void mos7720_bulk_in_callback(struct urb *urb)
 
 	data = urb->transfer_buffer;
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 	if (!port->read_urb) {
 		dbg("URB KILLED !!!");
@@ -262,10 +263,11 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
 
 	dbg("Entering .........");
 
-	tty = mos7720_port->port->port.tty;
+	tty = tty_port_tty_get(&mos7720_port->port->port);
 
 	if (tty && mos7720_port->open)
 		tty_wakeup(tty);
+	tty_kref_put(tty);
 }
 
 /*
@@ -1267,29 +1269,6 @@ static int get_lsr_info(struct tty_struct *tty,
 	return 0;
 }
 
-/*
- * get_number_bytes_avail - get number of bytes available
- *
- * Purpose: Let user call ioctl to get the count of number of bytes available.
- */
-static int get_number_bytes_avail(struct moschip_port *mos7720_port,
-				  unsigned int __user *value)
-{
-	unsigned int result = 0;
-	struct tty_struct *tty = mos7720_port->port->port.tty;
-
-	if (!tty)
-		return -ENOIOCTLCMD;
-
-	result = tty->read_cnt;
-
-	dbg("%s(%d) = %d", __func__,  mos7720_port->port->number, result);
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-
-	return -ENOIOCTLCMD;
-}
-
 static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 			  unsigned int __user *value)
 {
@@ -1409,13 +1388,6 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
 	dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
 
 	switch (cmd) {
-	case TIOCINQ:
-		/* return number of bytes available */
-		dbg("%s (%d) TIOCINQ", __func__,  port->number);
-		return get_number_bytes_avail(mos7720_port,
-					      (unsigned int __user *)arg);
-		break;
-
 	case TIOCSERGETLSR:
 		dbg("%s (%d) TIOCSERGETLSR", __func__,  port->number);
 		return get_lsr_info(tty, mos7720_port,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 09d82062b973..60543d79ef56 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -709,12 +709,13 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 	dbg("%s", "Entering ........... \n");
 
 	if (urb->actual_length) {
-		tty = mos7840_port->port->port.tty;
+		tty = tty_port_tty_get(&mos7840_port->port->port);
 		if (tty) {
 			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
 			dbg(" %s \n", data);
 			tty_flip_buffer_push(tty);
+			tty_kref_put(tty);
 		}
 		mos7840_port->icount.rx += urb->actual_length;
 		smp_wmb();
@@ -773,10 +774,10 @@ static void mos7840_bulk_out_data_callback(struct urb *urb)
 
 	dbg("%s \n", "Entering .........");
 
-	tty = mos7840_port->port->port.tty;
-
+	tty = tty_port_tty_get(&mos7840_port->port->port);
 	if (tty && mos7840_port->open)
 		tty_wakeup(tty);
+	tty_kref_put(tty);
 
 }
 
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index d6736531a0fa..bcdcbb822705 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -64,12 +64,13 @@ static void navman_read_int_callback(struct urb *urb)
 	usb_serial_debug_data(debug, &port->dev, __func__,
 			      urb->actual_length, data);
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 exit:
 	result = usb_submit_urb(urb, GFP_ATOMIC);
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index ae8e227f3db2..c4d70b0f1e48 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -172,7 +172,7 @@ static int omninet_open(struct tty_struct *tty,
 	dbg("%s - port %d", __func__, port->number);
 
 	wport = serial->port[1];
-	wport->port.tty = tty;		/* FIXME */
+	tty_port_tty_set(&wport->port, tty);
 
 	/* Start reading from the device */
 	usb_fill_bulk_urb(port->read_urb, serial->dev,
@@ -229,9 +229,11 @@ static void omninet_read_bulk_callback(struct urb *urb)
 	}
 
 	if (urb->actual_length && header->oh_len) {
-		tty_insert_flip_string(port->port.tty,
-			data + OMNINET_DATAOFFSET, header->oh_len);
-		tty_flip_buffer_push(port->port.tty);
+		struct tty_struct *tty = tty_port_tty_get(&port->port);
+		tty_insert_flip_string(tty, data + OMNINET_DATAOFFSET,
+							header->oh_len);
+		tty_flip_buffer_push(tty);
+		tty_kref_put(tty);
 	}
 
 	/* Continue trying to always read  */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 73f8277f88f2..6b1727e751e3 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -571,14 +571,14 @@ static void option_indat_callback(struct urb *urb)
 		dbg("%s: nonzero status: %d on endpoint %02x.",
 		    __func__, status, endpoint);
 	} else {
-		tty = port->port.tty;
+		tty = tty_port_tty_get(&port->port);
 		if (urb->actual_length) {
 			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
 			tty_flip_buffer_push(tty);
-		} else {
+		} else 
 			dbg("%s: empty read urb received", __func__);
-		}
+		tty_kref_put(tty);
 
 		/* Resubmit urb so we continue receiving */
 		if (port->port.count && status != -ESHUTDOWN) {
@@ -647,9 +647,13 @@ static void option_instat_callback(struct urb *urb)
 			portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
 			portdata->ri_state = ((signals & 0x08) ? 1 : 0);
 
-			if (port->port.tty && !C_CLOCAL(port->port.tty) &&
-					old_dcd_state && !portdata->dcd_state)
-				tty_hangup(port->port.tty);
+			if (old_dcd_state && !portdata->dcd_state) {
+				struct tty_struct *tty =
+						tty_port_tty_get(&port->port);
+				if (tty && !C_CLOCAL(tty))
+					tty_hangup(tty);
+				tty_kref_put(tty);
+			}
 		} else {
 			dbg("%s: type %x req %x", __func__,
 				req_pkt->bRequestType, req_pkt->bRequest);
@@ -793,7 +797,7 @@ static void option_close(struct tty_struct *tty,
 		for (i = 0; i < N_OUT_URB; i++)
 			usb_kill_urb(portdata->out_urbs[i]);
 	}
-	port->port.tty = NULL;	/* FIXME */
+	tty_port_tty_set(&port->port, NULL);
 }
 
 /* Helper functions used by option_setup_urbs */
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 81db5715ee25..ba551f00f16f 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -224,10 +224,6 @@ struct oti6858_private {
 	struct usb_serial_port *port;   /* USB port with which associated */
 };
 
-#undef dbg
-/* #define dbg(format, arg...) printk(KERN_INFO "%s: " format "\n", __FILE__, ## arg) */
-#define dbg(format, arg...) printk(KERN_INFO "" format "\n", ## arg)
-
 static void setup_line(struct work_struct *work)
 {
 	struct oti6858_private *priv = container_of(work,
@@ -1002,11 +998,12 @@ static void oti6858_read_bulk_callback(struct urb *urb)
 		return;
 	}
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty != NULL && urb->actual_length > 0) {
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 	/* schedule the interrupt urb if we are still open */
 	if (port->port.count != 0) {
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 1ede1441cb1b..908437847165 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -154,7 +154,6 @@ struct pl2303_private {
 	wait_queue_head_t delta_msr_wait;
 	u8 line_control;
 	u8 line_status;
-	u8 termios_initialized;
 	enum pl2303_type type;
 };
 
@@ -526,16 +525,6 @@ static void pl2303_set_termios(struct tty_struct *tty,
 
 	dbg("%s -  port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!priv->termios_initialized) {
-		*(tty->termios) = tty_std_termios;
-		tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-		tty->termios->c_ispeed = 9600;
-		tty->termios->c_ospeed = 9600;
-		priv->termios_initialized = 1;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	/* The PL2303 is reported to lose bytes if you change
 	   serial settings even to the same values as before. Thus
 	   we actually need to filter in this specific case */
@@ -1057,7 +1046,7 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 		tty_flag = TTY_FRAME;
 	dbg("%s - tty_flag = %d", __func__, tty_flag);
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length + 1);
 		/* overrun is special, not associated with a char */
@@ -1067,7 +1056,7 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 			tty_insert_flip_char(tty, data[i], tty_flag);
 		tty_flip_buffer_push(tty);
 	}
-
+	tty_kref_put(tty);
 	/* Schedule the next read _if_ we are still open */
 	if (port->port.count) {
 		urb->dev = port->serial->dev;
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index def52d07a4ea..72903ac9f5c0 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -217,6 +217,7 @@ static void safe_read_bulk_callback(struct urb *urb)
 	struct usb_serial_port *port =  urb->context;
 	unsigned char *data = urb->transfer_buffer;
 	unsigned char length = urb->actual_length;
+	struct tty_struct *tty;
 	int result;
 	int status = urb->status;
 
@@ -242,6 +243,7 @@ static void safe_read_bulk_callback(struct urb *urb)
 		printk("\n");
 	}
 #endif
+	tty = tty_port_tty_get(&port->port);
 	if (safe) {
 		__u16 fcs;
 		fcs = fcs_compute10(data, length, CRC10_INITFCS);
@@ -250,9 +252,9 @@ static void safe_read_bulk_callback(struct urb *urb)
 			if (actual_length <= (length - 2)) {
 				info("%s - actual: %d", __func__,
 							actual_length);
-				tty_insert_flip_string(port->port.tty,
+				tty_insert_flip_string(tty,
 							data, actual_length);
-				tty_flip_buffer_push(port->port.tty);
+				tty_flip_buffer_push(tty);
 			} else {
 				err("%s - inconsistent lengths %d:%d",
 					__func__, actual_length, length);
@@ -261,9 +263,10 @@ static void safe_read_bulk_callback(struct urb *urb)
 			err("%s - bad CRC %x", __func__, fcs);
 		}
 	} else {
-		tty_insert_flip_string(port->port.tty, data, length);
-		tty_flip_buffer_push(port->port.tty);
+		tty_insert_flip_string(tty, data, length);
+		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 	/* Continue trying to always read  */
 	usb_fill_bulk_urb(urb, port->serial->dev,
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ea1a103c99be..8b9eaf383679 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -440,14 +440,14 @@ static void sierra_indat_callback(struct urb *urb)
 		dbg("%s: nonzero status: %d on endpoint %02x.",
 		    __func__, status, endpoint);
 	} else {
-		tty = port->port.tty;
 		if (urb->actual_length) {
+		tty = tty_port_tty_get(&port->port);
 			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
 			tty_flip_buffer_push(tty);
-		} else {
+			tty_kref_put(tty);
+		} else
 			dbg("%s: empty read urb received", __func__);
-		}
 
 		/* Resubmit urb so we continue receiving */
 		if (port->port.count && status != -ESHUTDOWN) {
@@ -485,6 +485,7 @@ static void sierra_instat_callback(struct urb *urb)
 			unsigned char signals = *((unsigned char *)
 					urb->transfer_buffer +
 					sizeof(struct usb_ctrlrequest));
+			struct tty_struct *tty;
 
 			dbg("%s: signal x%x", __func__, signals);
 
@@ -494,9 +495,11 @@ static void sierra_instat_callback(struct urb *urb)
 			portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
 			portdata->ri_state = ((signals & 0x08) ? 1 : 0);
 
-			if (port->port.tty && !C_CLOCAL(port->port.tty) &&
+			tty = tty_port_tty_get(&port->port);
+			if (tty && !C_CLOCAL(tty) &&
 					old_dcd_state && !portdata->dcd_state)
-				tty_hangup(port->port.tty);
+				tty_hangup(tty);
+			tty_kref_put(tty);
 		} else {
 			dbg("%s: type %x req %x", __func__,
 				req_pkt->bRequestType, req_pkt->bRequest);
@@ -616,8 +619,7 @@ static void sierra_close(struct tty_struct *tty,
 	}
 
 	usb_kill_urb(port->interrupt_in_urb);
-
-	port->port.tty = NULL;	/* FIXME */
+	tty_port_tty_set(&port->port, NULL);
 }
 
 static int sierra_startup(struct usb_serial *serial)
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 283cf6b36b2c..1533d6e12238 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -755,7 +755,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
 		tty_flag = TTY_FRAME;
 	dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length + 1);
 		/* overrun is special, not associated with a char */
@@ -765,6 +765,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
 			tty_insert_flip_char(tty, data[i], tty_flag);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 	/* Schedule the next read _if_ we are still open */
 	if (port->port.count) {
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 9a3e495c769c..c90237d48b0e 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -179,7 +179,7 @@ static int ti_set_mcr(struct ti_port *tport, unsigned int mcr);
 static int ti_get_lsr(struct ti_port *tport);
 static int ti_get_serial_info(struct ti_port *tport,
 	struct serial_struct __user *ret_arg);
-static int ti_set_serial_info(struct ti_port *tport,
+static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
 	struct serial_struct __user *new_arg);
 static void ti_handle_new_msr(struct ti_port *tport, __u8 msr);
 
@@ -857,8 +857,8 @@ static int ti_ioctl(struct tty_struct *tty, struct file *file,
 				(struct serial_struct __user *)arg);
 	case TIOCSSERIAL:
 		dbg("%s - (%d) TIOCSSERIAL", __func__, port->number);
-		return ti_set_serial_info(tport,
-					(struct serial_struct __user *)arg);
+		return ti_set_serial_info(tty, tport,
+				(struct serial_struct __user *)arg);
 	case TIOCMIWAIT:
 		dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
 		cprev = tport->tp_icount;
@@ -1211,6 +1211,7 @@ static void ti_bulk_in_callback(struct urb *urb)
 	struct device *dev = &urb->dev->dev;
 	int status = urb->status;
 	int retval = 0;
+	struct tty_struct *tty;
 
 	dbg("%s", __func__);
 
@@ -1239,20 +1240,22 @@ static void ti_bulk_in_callback(struct urb *urb)
 		return;
 	}
 
-	if (port->port.tty && urb->actual_length) {
+	tty = tty_port_tty_get(&port->port);
+	if (tty && urb->actual_length) {
 		usb_serial_debug_data(debug, dev, __func__,
 			urb->actual_length, urb->transfer_buffer);
 
 		if (!tport->tp_is_open)
 			dbg("%s - port closed, dropping data", __func__);
 		else
-			ti_recv(&urb->dev->dev, port->port.tty,
+			ti_recv(&urb->dev->dev, tty,
 						urb->transfer_buffer,
 						urb->actual_length);
 
 		spin_lock(&tport->tp_lock);
 		tport->tp_icount.rx += urb->actual_length;
 		spin_unlock(&tport->tp_lock);
+		tty_kref_put(tty);
 	}
 
 exit:
@@ -1330,7 +1333,7 @@ static void ti_send(struct ti_port *tport)
 {
 	int count, result;
 	struct usb_serial_port *port = tport->tp_port;
-	struct tty_struct *tty = port->port.tty;	/* FIXME */
+	struct tty_struct *tty = tty_port_tty_get(&port->port);	/* FIXME */
 	unsigned long flags;
 
 
@@ -1338,19 +1341,15 @@ static void ti_send(struct ti_port *tport)
 
 	spin_lock_irqsave(&tport->tp_lock, flags);
 
-	if (tport->tp_write_urb_in_use) {
-		spin_unlock_irqrestore(&tport->tp_lock, flags);
-		return;
-	}
+	if (tport->tp_write_urb_in_use)
+		goto unlock;
 
 	count = ti_buf_get(tport->tp_write_buf,
 				port->write_urb->transfer_buffer,
 				port->bulk_out_size);
 
-	if (count == 0) {
-		spin_unlock_irqrestore(&tport->tp_lock, flags);
-		return;
-	}
+	if (count == 0)
+		goto unlock;
 
 	tport->tp_write_urb_in_use = 1;
 
@@ -1380,7 +1379,13 @@ static void ti_send(struct ti_port *tport)
 	/* more room in the buffer for new writes, wakeup */
 	if (tty)
 		tty_wakeup(tty);
+	tty_kref_put(tty);
 	wake_up_interruptible(&tport->tp_write_wait);
+	return;
+unlock:
+	spin_unlock_irqrestore(&tport->tp_lock, flags);
+	tty_kref_put(tty);
+	return;
 }
 
 
@@ -1464,20 +1469,16 @@ static int ti_get_serial_info(struct ti_port *tport,
 }
 
 
-static int ti_set_serial_info(struct ti_port *tport,
+static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
 	struct serial_struct __user *new_arg)
 {
-	struct usb_serial_port *port = tport->tp_port;
 	struct serial_struct new_serial;
 
 	if (copy_from_user(&new_serial, new_arg, sizeof(new_serial)))
 		return -EFAULT;
 
 	tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
-	/* FIXME */
-	if (port->port.tty)
-		port->port.tty->low_latency =
-			(tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 	tport->tp_closing_wait = new_serial.closing_wait;
 
 	return 0;
@@ -1510,7 +1511,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
 	tport->tp_msr = msr & TI_MSR_MASK;
 
 	/* handle CTS flow control */
-	tty = tport->tp_port->port.tty;
+	tty = tty_port_tty_get(&tport->tp_port->port);
 	if (tty && C_CRTSCTS(tty)) {
 		if (msr & TI_MSR_CTS) {
 			tty->hw_stopped = 0;
@@ -1519,6 +1520,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
 			tty->hw_stopped = 1;
 		}
 	}
+	tty_kref_put(tty);
 }
 
 
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 4f7f9e3ae0a4..e7d4246027b2 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -214,7 +214,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 	/* set up our port structure making the tty driver
 	 * remember our port object, and us it */
 	tty->driver_data = port;
-	port->port.tty = tty;
+	tty_port_tty_set(&port->port, tty);
 
 	if (port->port.count == 1) {
 
@@ -246,7 +246,7 @@ bailout_module_put:
 bailout_mutex_unlock:
 	port->port.count = 0;
 	tty->driver_data = NULL;
-	port->port.tty = NULL;
+	tty_port_tty_set(&port->port, NULL);
 	mutex_unlock(&port->mutex);
 bailout_kref_put:
 	usb_serial_put(serial);
@@ -276,10 +276,11 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
 		port->serial->type->close(tty, port, filp);
 
 	if (port->port.count == (port->console? 1 : 0)) {
-		if (port->port.tty) {
-			if (port->port.tty->driver_data)
-				port->port.tty->driver_data = NULL;
-			port->port.tty = NULL;
+		struct tty_struct *tty = tty_port_tty_get(&port->port);
+		if (tty) {
+			if (tty->driver_data)
+				tty->driver_data = NULL;
+			tty_port_tty_set(&port->port, NULL);
 		}
 	}
 
@@ -508,11 +509,12 @@ static void usb_serial_port_work(struct work_struct *work)
 	if (!port)
 		return;
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (!tty)
 		return;
 
 	tty_wakeup(tty);
+	tty_kref_put(tty);
 }
 
 static void port_release(struct device *dev)
@@ -819,6 +821,7 @@ int usb_serial_probe(struct usb_interface *interface,
 		port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
 		if (!port)
 			goto probe_error;
+		tty_port_init(&port->port);
 		port->serial = serial;
 		spin_lock_init(&port->lock);
 		mutex_init(&port->mutex);
@@ -1040,8 +1043,11 @@ void usb_serial_disconnect(struct usb_interface *interface)
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
 		if (port) {
-			if (port->port.tty)
-				tty_hangup(port->port.tty);
+			struct tty_struct *tty = tty_port_tty_get(&port->port);
+			if (tty) {
+				tty_hangup(tty);
+				tty_kref_put(tty);
+			}
 			kill_traffic(port);
 		}
 	}
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index cf8924f9a2cc..a6d1c75a1c89 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -499,7 +499,7 @@ static void visor_read_bulk_callback(struct urb *urb)
 	int status = urb->status;
 	struct tty_struct *tty;
 	int result;
-	int available_room;
+	int available_room = 0;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -512,13 +512,17 @@ static void visor_read_bulk_callback(struct urb *urb)
 	usb_serial_debug_data(debug, &port->dev, __func__,
 						urb->actual_length, data);
 
-	tty = port->port.tty;
-	if (tty && urb->actual_length) {
-		available_room = tty_buffer_request_room(tty,
+	if (urb->actual_length) {
+		tty = tty_port_tty_get(&port->port);
+		if (tty) {
+			available_room = tty_buffer_request_room(tty,
 							urb->actual_length);
-		if (available_room) {
-			tty_insert_flip_string(tty, data, available_room);
-			tty_flip_buffer_push(tty);
+			if (available_room) {
+				tty_insert_flip_string(tty, data,
+							available_room);
+				tty_flip_buffer_push(tty);
+			}
+			tty_kref_put(tty);
 		}
 		spin_lock(&priv->lock);
 		priv->bytes_in += available_room;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 3a9d14384a43..11c8b97a5177 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -1481,7 +1481,7 @@ static void rx_data_softint(struct work_struct *work)
 	struct whiteheat_private *info =
 		container_of(work, struct whiteheat_private, rx_work);
 	struct usb_serial_port *port = info->port;
-	struct tty_struct *tty = port->port.tty;
+	struct tty_struct *tty = tty_port_tty_get(&port->port);
 	struct whiteheat_urb_wrap *wrap;
 	struct urb *urb;
 	unsigned long flags;
@@ -1493,7 +1493,7 @@ static void rx_data_softint(struct work_struct *work)
 	spin_lock_irqsave(&info->lock, flags);
 	if (info->flags & THROTTLED) {
 		spin_unlock_irqrestore(&info->lock, flags);
-		return;
+		goto out;
 	}
 
 	list_for_each_safe(tmp, tmp2, &info->rx_urb_q) {
@@ -1513,7 +1513,7 @@ static void rx_data_softint(struct work_struct *work)
 				spin_unlock_irqrestore(&info->lock, flags);
 				tty_flip_buffer_push(tty);
 				schedule_work(&info->rx_work);
-				return;
+				goto out;
 			}
 			tty_insert_flip_string(tty, urb->transfer_buffer, len);
 			sent += len;
@@ -1536,6 +1536,8 @@ static void rx_data_softint(struct work_struct *work)
 
 	if (sent)
 		tty_flip_buffer_push(tty);
+out:
+	tty_kref_put(tty);
 }