Merge tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 5.16-rc1. Nothing major in here, just lots of little cleanups and additions for new hardware, all of which have been in linux-next for a while with no reported problems. Included in here are: - tiny Thunderbolt driver updates - USB typec driver updates - USB serial driver updates - USB gadget driver updates - dwc2 and dwc3 controller driver updates - tiny USB host driver updates - minor USB driver fixes and updates - USB dts updates for various platforms" * tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits) usb: gadget: Mark USB_FSL_QE broken on 64-bit usb: gadget: f_mass_storage: Disable eps during disconnect usb: gadget: udc: core: Revise comments for USB ep enable/disable USB: serial: keyspan: fix memleak on probe errors USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send() USB: serial: ch314: use usb_control_msg_recv() USB: iowarrior: fix control-message timeouts Documentation: USB: fix example bulk-message timeout usb: dwc2: stm32mp15: set otg_rev usb: dwc2: add otg_rev and otg_caps information for gadget driver dt-bindings: usb: dwc2: adopt otg properties defined in usb-drd.yaml dt-bindings: usb: dwc2: Add reference to usb-drd.yaml usb: gadget: uvc: implement dwPresentationTime and scrSourceClock usb: gadget: uvc: use on returned header len in video_encode_isoc_sg usb:gadget: f_uac1: fixed sync playback Docs: usb: remove :c:func: for usb_register and usb_deregister Docs: usb: update struct usb_driver usb: gadget: configfs: change config attributes file operation usb: gadget: configfs: add cfg_to_gadget_info() helper usb: dwc3: Align DWC3_EP_* flag macros ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2021-11-04 15:50:43 +0100
committer: Linus Torvalds <torvalds@linux-foundation.org> 2021-11-04 15:50:43 +0100
commit: 048ff8629e117d8411a787559417c781bcd78d7e (patch)
tree: 2cff07ed5c13a096d1c880139873870146cca74a /drivers/usb
parent: Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cl... (diff)
parent: usb: gadget: Mark USB_FSL_QE broken on 64-bit (diff)
download: linux-048ff8629e117d8411a787559417c781bcd78d7e.tar.xz
linux-048ff8629e117d8411a787559417c781bcd78d7e.zip
84 files changed, 1536 insertions, 885 deletions
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index 33ae03ac13a6..da17be1ef64e 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -1015,9 +1015,11 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
 	int error = -ENOMEM;
 	int i, length;
 	unsigned int maxpacket, num_packets;
+	size_t size;
 
 	/* instance init */
-	instance = kzalloc(sizeof(*instance) + sizeof(struct urb *) * (num_rcv_urbs + num_snd_urbs), GFP_KERNEL);
+	size = struct_size(instance, urbs, num_rcv_urbs + num_snd_urbs);
+	instance = kzalloc(size, GFP_KERNEL);
 	if (!instance)
 		return -ENOMEM;
 
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 2b18f5088ae4..a56f06368d14 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -514,7 +514,7 @@ int hw_device_reset(struct ci_hdrc *ci)
 	return 0;
 }
 
-static irqreturn_t ci_irq(int irq, void *data)
+static irqreturn_t ci_irq_handler(int irq, void *data)
 {
 	struct ci_hdrc *ci = data;
 	irqreturn_t ret = IRQ_NONE;
@@ -567,6 +567,15 @@ static irqreturn_t ci_irq(int irq, void *data)
 	return ret;
 }
 
+static void ci_irq(struct ci_hdrc *ci)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ci_irq_handler(ci->irq, ci);
+	local_irq_restore(flags);
+}
+
 static int ci_cable_notifier(struct notifier_block *nb, unsigned long event,
 			     void *ptr)
 {
@@ -576,7 +585,7 @@ static int ci_cable_notifier(struct notifier_block *nb, unsigned long event,
 	cbl->connected = event;
 	cbl->changed = true;
 
-	ci_irq(ci->irq, ci);
+	ci_irq(ci);
 	return NOTIFY_DONE;
 }
 
@@ -617,7 +626,7 @@ static int ci_usb_role_switch_set(struct usb_role_switch *sw,
 	if (cable) {
 		cable->changed = true;
 		cable->connected = false;
-		ci_irq(ci->irq, ci);
+		ci_irq(ci);
 		spin_unlock_irqrestore(&ci->lock, flags);
 		if (ci->wq && role != USB_ROLE_NONE)
 			flush_workqueue(ci->wq);
@@ -635,7 +644,7 @@ static int ci_usb_role_switch_set(struct usb_role_switch *sw,
 	if (cable) {
 		cable->changed = true;
 		cable->connected = true;
-		ci_irq(ci->irq, ci);
+		ci_irq(ci);
 	}
 	spin_unlock_irqrestore(&ci->lock, flags);
 	pm_runtime_put_sync(ci->dev);
@@ -1174,7 +1183,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 		}
 	}
 
-	ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED,
+	ret = devm_request_irq(dev, ci->irq, ci_irq_handler, IRQF_SHARED,
 			ci->platdata->name, ci);
 	if (ret)
 		goto stop;
@@ -1295,11 +1304,11 @@ static void ci_extcon_wakeup_int(struct ci_hdrc *ci)
 
 	if (!IS_ERR(cable_id->edev) && ci->is_otg &&
 		(otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS))
-		ci_irq(ci->irq, ci);
+		ci_irq(ci);
 
 	if (!IS_ERR(cable_vbus->edev) && ci->is_otg &&
 		(otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS))
-		ci_irq(ci->irq, ci);
+		ci_irq(ci);
 }
 
 static int ci_controller_resume(struct device *dev)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 8834ca613721..f9ca5010f65b 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -49,6 +49,8 @@ ctrl_endpt_in_desc = {
 	.wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
 };
 
+static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
+		       struct td_node *node);
 /**
  * hw_ep_bit: calculates the bit number
  * @num: endpoint number
@@ -599,6 +601,12 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
 
 		prevlastnode->ptr->next = cpu_to_le32(next);
 		wmb();
+
+		if (ci->rev == CI_REVISION_22) {
+			if (!hw_read(ci, OP_ENDPTSTAT, BIT(n)))
+				reprime_dtd(ci, hwep, prevlastnode);
+		}
+
 		if (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
 			goto done;
 		do {
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 7b2e2420ecae..b3ce7338cb6b 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1859,7 +1859,6 @@ static const struct usb_device_id acm_ids[] = {
 	{ NOKIA_PCSUITE_ACM_INFO(0x0071), }, /* Nokia N82 */
 	{ NOKIA_PCSUITE_ACM_INFO(0x04F0), }, /* Nokia N95 & N95-3 NAM */
 	{ NOKIA_PCSUITE_ACM_INFO(0x0070), }, /* Nokia N95 8GB  */
-	{ NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */
 	{ NOKIA_PCSUITE_ACM_INFO(0x0099), }, /* Nokia 6210 Navigator, RM-367 */
 	{ NOKIA_PCSUITE_ACM_INFO(0x0128), }, /* Nokia 6210 Navigator, RM-419 */
 	{ NOKIA_PCSUITE_ACM_INFO(0x008f), }, /* Nokia 6220 Classic */
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index fdf79bcf7eb0..7f2c83f299d3 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -911,7 +911,7 @@ static int wdm_wwan_port_tx(struct wwan_port *port, struct sk_buff *skb)
 	return rv;
 }
 
-static struct wwan_port_ops wdm_wwan_port_ops = {
+static const struct wwan_port_ops wdm_wwan_port_ops = {
 	.start = wdm_wwan_port_start,
 	.stop = wdm_wwan_port_stop,
 	.tx = wdm_wwan_port_tx,
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index b199eb65f378..16b1fd9dc60c 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -986,7 +986,7 @@ int usb_get_bos_descriptor(struct usb_device *dev)
 	__u8 cap_type;
 	int ret;
 
-	bos = kzalloc(sizeof(struct usb_bos_descriptor), GFP_KERNEL);
+	bos = kzalloc(sizeof(*bos), GFP_KERNEL);
 	if (!bos)
 		return -ENOMEM;
 
@@ -1007,7 +1007,7 @@ int usb_get_bos_descriptor(struct usb_device *dev)
 	if (total_len < length)
 		return -EINVAL;
 
-	dev->bos = kzalloc(sizeof(struct usb_host_bos), GFP_KERNEL);
+	dev->bos = kzalloc(sizeof(*dev->bos), GFP_KERNEL);
 	if (!dev->bos)
 		return -ENOMEM;
 
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 9618ba622a2d..fa66e6e58792 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -32,6 +32,7 @@
 #include <linux/usb.h>
 #include <linux/usbdevice_fs.h>
 #include <linux/usb/hcd.h>	/* for usbcore internals */
+#include <linux/usb/quirks.h>
 #include <linux/cdev.h>
 #include <linux/notifier.h>
 #include <linux/security.h>
@@ -1102,14 +1103,55 @@ static int usbdev_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
+static void usbfs_blocking_completion(struct urb *urb)
+{
+	complete((struct completion *) urb->context);
+}
+
+/*
+ * Much like usb_start_wait_urb, but returns status separately from
+ * actual_length and uses a killable wait.
+ */
+static int usbfs_start_wait_urb(struct urb *urb, int timeout,
+		unsigned int *actlen)
+{
+	DECLARE_COMPLETION_ONSTACK(ctx);
+	unsigned long expire;
+	int rc;
+
+	urb->context = &ctx;
+	urb->complete = usbfs_blocking_completion;
+	*actlen = 0;
+	rc = usb_submit_urb(urb, GFP_KERNEL);
+	if (unlikely(rc))
+		return rc;
+
+	expire = (timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT);
+	rc = wait_for_completion_killable_timeout(&ctx, expire);
+	if (rc <= 0) {
+		usb_kill_urb(urb);
+		*actlen = urb->actual_length;
+		if (urb->status != -ENOENT)
+			;	/* Completed before it was killed */
+		else if (rc < 0)
+			return -EINTR;
+		else
+			return -ETIMEDOUT;
+	}
+	*actlen = urb->actual_length;
+	return urb->status;
+}
+
 static int do_proc_control(struct usb_dev_state *ps,
 		struct usbdevfs_ctrltransfer *ctrl)
 {
 	struct usb_device *dev = ps->dev;
 	unsigned int tmo;
 	unsigned char *tbuf;
-	unsigned wLength;
+	unsigned int wLength, actlen;
 	int i, pipe, ret;
+	struct urb *urb = NULL;
+	struct usb_ctrlrequest *dr = NULL;
 
 	ret = check_ctrlrecip(ps, ctrl->bRequestType, ctrl->bRequest,
 			      ctrl->wIndex);
@@ -1122,51 +1164,63 @@ static int do_proc_control(struct usb_dev_state *ps,
 			sizeof(struct usb_ctrlrequest));
 	if (ret)
 		return ret;
+
+	ret = -ENOMEM;
 	tbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
-	if (!tbuf) {
-		ret = -ENOMEM;
+	if (!tbuf)
 		goto done;
-	}
+	urb = usb_alloc_urb(0, GFP_NOIO);
+	if (!urb)
+		goto done;
+	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
+	if (!dr)
+		goto done;
+
+	dr->bRequestType = ctrl->bRequestType;
+	dr->bRequest = ctrl->bRequest;
+	dr->wValue = cpu_to_le16(ctrl->wValue);
+	dr->wIndex = cpu_to_le16(ctrl->wIndex);
+	dr->wLength = cpu_to_le16(ctrl->wLength);
+
 	tmo = ctrl->timeout;
 	snoop(&dev->dev, "control urb: bRequestType=%02x "
 		"bRequest=%02x wValue=%04x "
 		"wIndex=%04x wLength=%04x\n",
 		ctrl->bRequestType, ctrl->bRequest, ctrl->wValue,
 		ctrl->wIndex, ctrl->wLength);
-	if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength) {
+
+	if ((ctrl->bRequestType & USB_DIR_IN) && wLength) {
 		pipe = usb_rcvctrlpipe(dev, 0);
-		snoop_urb(dev, NULL, pipe, ctrl->wLength, tmo, SUBMIT, NULL, 0);
+		usb_fill_control_urb(urb, dev, pipe, (unsigned char *) dr, tbuf,
+				wLength, NULL, NULL);
+		snoop_urb(dev, NULL, pipe, wLength, tmo, SUBMIT, NULL, 0);
 
 		usb_unlock_device(dev);
-		i = usb_control_msg(dev, pipe, ctrl->bRequest,
-				    ctrl->bRequestType, ctrl->wValue, ctrl->wIndex,
-				    tbuf, ctrl->wLength, tmo);
+		i = usbfs_start_wait_urb(urb, tmo, &actlen);
 		usb_lock_device(dev);
-		snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE,
-			  tbuf, max(i, 0));
-		if ((i > 0) && ctrl->wLength) {
-			if (copy_to_user(ctrl->data, tbuf, i)) {
+		snoop_urb(dev, NULL, pipe, actlen, i, COMPLETE, tbuf, actlen);
+		if (!i && actlen) {
+			if (copy_to_user(ctrl->data, tbuf, actlen)) {
 				ret = -EFAULT;
-				goto done;
+				goto recv_fault;
 			}
 		}
 	} else {
-		if (ctrl->wLength) {
-			if (copy_from_user(tbuf, ctrl->data, ctrl->wLength)) {
+		if (wLength) {
+			if (copy_from_user(tbuf, ctrl->data, wLength)) {
 				ret = -EFAULT;
 				goto done;
 			}
 		}
 		pipe = usb_sndctrlpipe(dev, 0);
-		snoop_urb(dev, NULL, pipe, ctrl->wLength, tmo, SUBMIT,
-			tbuf, ctrl->wLength);
+		usb_fill_control_urb(urb, dev, pipe, (unsigned char *) dr, tbuf,
+				wLength, NULL, NULL);
+		snoop_urb(dev, NULL, pipe, wLength, tmo, SUBMIT, tbuf, wLength);
 
 		usb_unlock_device(dev);
-		i = usb_control_msg(dev, pipe, ctrl->bRequest,
-				    ctrl->bRequestType, ctrl->wValue, ctrl->wIndex,
-				    tbuf, ctrl->wLength, tmo);
+		i = usbfs_start_wait_urb(urb, tmo, &actlen);
 		usb_lock_device(dev);
-		snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE, NULL, 0);
+		snoop_urb(dev, NULL, pipe, actlen, i, COMPLETE, NULL, 0);
 	}
 	if (i < 0 && i != -EPIPE) {
 		dev_printk(KERN_DEBUG, &dev->dev, "usbfs: USBDEVFS_CONTROL "
@@ -1174,8 +1228,15 @@ static int do_proc_control(struct usb_dev_state *ps,
 			   current->comm, ctrl->bRequestType, ctrl->bRequest,
 			   ctrl->wLength, i);
 	}
-	ret = i;
+	ret = (i < 0 ? i : actlen);
+
+ recv_fault:
+	/* Linger a bit, prior to the next control message. */
+	if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG)
+		msleep(200);
  done:
+	kfree(dr);
+	usb_free_urb(urb);
 	free_page((unsigned long) tbuf);
 	usbfs_decrease_memory_usage(PAGE_SIZE + sizeof(struct urb) +
 			sizeof(struct usb_ctrlrequest));
@@ -1195,10 +1256,11 @@ static int do_proc_bulk(struct usb_dev_state *ps,
 		struct usbdevfs_bulktransfer *bulk)
 {
 	struct usb_device *dev = ps->dev;
-	unsigned int tmo, len1, pipe;
-	int len2;
+	unsigned int tmo, len1, len2, pipe;
 	unsigned char *tbuf;
 	int i, ret;
+	struct urb *urb = NULL;
+	struct usb_host_endpoint *ep;
 
 	ret = findintfep(ps->dev, bulk->ep);
 	if (ret < 0)
@@ -1206,14 +1268,17 @@ static int do_proc_bulk(struct usb_dev_state *ps,
 	ret = checkintf(ps, ret);
 	if (ret)
 		return ret;
+
+	len1 = bulk->len;
+	if (len1 < 0 || len1 >= (INT_MAX - sizeof(struct urb)))
+		return -EINVAL;
+
 	if (bulk->ep & USB_DIR_IN)
 		pipe = usb_rcvbulkpipe(dev, bulk->ep & 0x7f);
 	else
 		pipe = usb_sndbulkpipe(dev, bulk->ep & 0x7f);
-	if (!usb_maxpacket(dev, pipe, !(bulk->ep & USB_DIR_IN)))
-		return -EINVAL;
-	len1 = bulk->len;
-	if (len1 >= (INT_MAX - sizeof(struct urb)))
+	ep = usb_pipe_endpoint(dev, pipe);
+	if (!ep || !usb_endpoint_maxp(&ep->desc))
 		return -EINVAL;
 	ret = usbfs_increase_memory_usage(len1 + sizeof(struct urb));
 	if (ret)
@@ -1223,17 +1288,29 @@ static int do_proc_bulk(struct usb_dev_state *ps,
 	 * len1 can be almost arbitrarily large.  Don't WARN if it's
 	 * too big, just fail the request.
 	 */
+	ret = -ENOMEM;
 	tbuf = kmalloc(len1, GFP_KERNEL | __GFP_NOWARN);
-	if (!tbuf) {
-		ret = -ENOMEM;
+	if (!tbuf)
+		goto done;
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
 		goto done;
+
+	if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+			USB_ENDPOINT_XFER_INT) {
+		pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
+		usb_fill_int_urb(urb, dev, pipe, tbuf, len1,
+				NULL, NULL, ep->desc.bInterval);
+	} else {
+		usb_fill_bulk_urb(urb, dev, pipe, tbuf, len1, NULL, NULL);
 	}
+
 	tmo = bulk->timeout;
 	if (bulk->ep & 0x80) {
 		snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, NULL, 0);
 
 		usb_unlock_device(dev);
-		i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
+		i = usbfs_start_wait_urb(urb, tmo, &len2);
 		usb_lock_device(dev);
 		snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, tbuf, len2);
 
@@ -1253,12 +1330,13 @@ static int do_proc_bulk(struct usb_dev_state *ps,
 		snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, tbuf, len1);
 
 		usb_unlock_device(dev);
-		i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
+		i = usbfs_start_wait_urb(urb, tmo, &len2);
 		usb_lock_device(dev);
 		snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, NULL, 0);
 	}
 	ret = (i < 0 ? i : len2);
  done:
+	usb_free_urb(urb);
 	kfree(tbuf);
 	usbfs_decrease_memory_usage(len1 + sizeof(struct urb));
 	return ret;
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 7ee6e4cc0d89..a3311e937847 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2732,14 +2732,14 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd,
 		hcd->irq = irqnum;
 		dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
 				(hcd->driver->flags & HCD_MEMORY) ?
-					"io mem" : "io base",
-					(unsigned long long)hcd->rsrc_start);
+					"io mem" : "io port",
+				(unsigned long long)hcd->rsrc_start);
 	} else {
 		hcd->irq = 0;
 		if (hcd->rsrc_start)
 			dev_info(hcd->self.controller, "%s 0x%08llx\n",
 					(hcd->driver->flags & HCD_MEMORY) ?
-					"io mem" : "io base",
+						"io mem" : "io port",
 					(unsigned long long)hcd->rsrc_start);
 	}
 	return 0;
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index cb9059a8444b..37185eb66ae4 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -238,11 +238,14 @@ enum dwc2_ep0_state {
 /**
  * struct dwc2_core_params - Parameters for configuring the core
  *
- * @otg_cap:            Specifies the OTG capabilities.
- *                       0 - HNP and SRP capable
- *                       1 - SRP Only capable
- *                       2 - No HNP/SRP capable (always available)
- *                      Defaults to best available option (0, 1, then 2)
+ * @otg_caps:           Specifies the OTG capabilities. OTG caps from the platform parameters,
+ *                      used to setup the:
+ *                       - HNP and SRP capable
+ *                       - SRP Only capable
+ *                       - No HNP/SRP capable (always available)
+ *                       Defaults to best available option
+ *                       - OTG revision number the device is compliant with, in binary-coded
+ *                         decimal (i.e. 2.0 is 0200H). (see struct usb_otg_caps)
  * @host_dma:           Specifies whether to use slave or DMA mode for accessing
  *                      the data FIFOs. The driver will automatically detect the
  *                      value for this parameter if none is specified.
@@ -453,11 +456,7 @@ enum dwc2_ep0_state {
  * default described above.
  */
 struct dwc2_core_params {
-	u8 otg_cap;
-#define DWC2_CAP_PARAM_HNP_SRP_CAPABLE		0
-#define DWC2_CAP_PARAM_SRP_ONLY_CAPABLE		1
-#define DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE	2
-
+	struct usb_otg_caps otg_caps;
 	u8 phy_type;
 #define DWC2_PHY_TYPE_PARAM_FS		0
 #define DWC2_PHY_TYPE_PARAM_UTMI	1
diff --git a/drivers/usb/dwc2/debugfs.c b/drivers/usb/dwc2/debugfs.c
index f13eed4231e1..1d72ece9cfe4 100644
--- a/drivers/usb/dwc2/debugfs.c
+++ b/drivers/usb/dwc2/debugfs.c
@@ -670,7 +670,9 @@ static int params_show(struct seq_file *seq, void *v)
 	struct dwc2_core_params *p = &hsotg->params;
 	int i;
 
-	print_param(seq, p, otg_cap);
+	print_param(seq, p, otg_caps.hnp_support);
+	print_param(seq, p, otg_caps.srp_support);
+	print_param(seq, p, otg_caps.otg_rev);
 	print_param(seq, p, dma_desc_enable);
 	print_param(seq, p, dma_desc_fs_enable);
 	print_param(seq, p, speed);
diff --git a/drivers/usb/dwc2/drd.c b/drivers/usb/dwc2/drd.c
index 2d4176f5788e..aa6eb76f64dd 100644
--- a/drivers/usb/dwc2/drd.c
+++ b/drivers/usb/dwc2/drd.c
@@ -7,6 +7,7 @@
  * Author(s): Amelie Delaunay <amelie.delaunay@st.com>
  */
 
+#include <linux/clk.h>
 #include <linux/iopoll.h>
 #include <linux/platform_device.h>
 #include <linux/usb/role.h>
@@ -25,9 +26,9 @@ static void dwc2_ovr_init(struct dwc2_hsotg *hsotg)
 	gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL);
 	dwc2_writel(hsotg, gotgctl, GOTGCTL);
 
-	dwc2_force_mode(hsotg, false);
-
 	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	dwc2_force_mode(hsotg, (hsotg->dr_mode == USB_DR_MODE_HOST));
 }
 
 static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid)
@@ -39,6 +40,7 @@ static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid)
 	    (!valid && !(gotgctl & GOTGCTL_ASESVLD)))
 		return -EALREADY;
 
+	gotgctl &= ~GOTGCTL_BVALOVAL;
 	if (valid)
 		gotgctl |= GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL;
 	else
@@ -57,6 +59,7 @@ static int dwc2_ovr_bvalid(struct dwc2_hsotg *hsotg, bool valid)
 	    (!valid && !(gotgctl & GOTGCTL_BSESVLD)))
 		return -EALREADY;
 
+	gotgctl &= ~GOTGCTL_AVALOVAL;
 	if (valid)
 		gotgctl |= GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL;
 	else
@@ -86,6 +89,20 @@ static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
 	}
 #endif
 
+	/*
+	 * In case of USB_DR_MODE_PERIPHERAL, clock is disabled at the end of
+	 * the probe and enabled on udc_start.
+	 * If role-switch set is called before the udc_start, we need to enable
+	 * the clock to read/write GOTGCTL and GUSBCFG registers to override
+	 * mode and sessions. It is the case if cable is plugged at boot.
+	 */
+	if (!hsotg->ll_hw_enabled && hsotg->clk) {
+		int ret = clk_prepare_enable(hsotg->clk);
+
+		if (ret)
+			return ret;
+	}
+
 	spin_lock_irqsave(&hsotg->lock, flags);
 
 	if (role == USB_ROLE_HOST) {
@@ -110,6 +127,9 @@ static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
 		/* This will raise a Connector ID Status Change Interrupt */
 		dwc2_force_mode(hsotg, role == USB_ROLE_HOST);
 
+	if (!hsotg->ll_hw_enabled && hsotg->clk)
+		clk_disable_unprepare(hsotg->clk);
+
 	dev_dbg(hsotg->dev, "%s-session valid\n",
 		role == USB_ROLE_NONE ? "No" :
 		role == USB_ROLE_HOST ? "A" : "B");
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 11d85a6e0b0d..4ab4a1d5062b 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -4966,6 +4966,7 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg)
 	hsotg->gadget.max_speed = USB_SPEED_HIGH;
 	hsotg->gadget.ops = &dwc2_hsotg_gadget_ops;
 	hsotg->gadget.name = dev_name(dev);
+	hsotg->gadget.otg_caps = &hsotg->params.otg_caps;
 	hsotg->remote_wakeup_allowed = 0;
 
 	if (hsotg->params.lpm)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index a215ec9e172e..13c779a28e94 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -138,19 +138,15 @@ static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg)
 
 	switch (hsotg->hw_params.op_mode) {
 	case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
-		if (hsotg->params.otg_cap ==
-				DWC2_CAP_PARAM_HNP_SRP_CAPABLE)
+		if (hsotg->params.otg_caps.hnp_support &&
+		    hsotg->params.otg_caps.srp_support)
 			usbcfg |= GUSBCFG_HNPCAP;
-		if (hsotg->params.otg_cap !=
-				DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE)
-			usbcfg |= GUSBCFG_SRPCAP;
-		break;
+		fallthrough;
 
 	case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
 	case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
 	case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
-		if (hsotg->params.otg_cap !=
-				DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE)
+		if (hsotg->params.otg_caps.srp_support)
 			usbcfg |= GUSBCFG_SRPCAP;
 		break;
 
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 59e119345994..d300ae3d9274 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -36,6 +36,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/usb/of.h>
 
 #include "core.h"
 
@@ -53,7 +54,8 @@ static void dwc2_set_his_params(struct dwc2_hsotg *hsotg)
 {
 	struct dwc2_core_params *p = &hsotg->params;
 
-	p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+	p->otg_caps.hnp_support = false;
+	p->otg_caps.srp_support = false;
 	p->speed = DWC2_SPEED_PARAM_HIGH;
 	p->host_rx_fifo_size = 512;
 	p->host_nperio_tx_fifo_size = 512;
@@ -84,7 +86,8 @@ static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg)
 {
 	struct dwc2_core_params *p = &hsotg->params;
 
-	p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+	p->otg_caps.hnp_support = false;
+	p->otg_caps.srp_support = false;
 	p->host_rx_fifo_size = 525;
 	p->host_nperio_tx_fifo_size = 128;
 	p->host_perio_tx_fifo_size = 256;
@@ -97,7 +100,8 @@ static void dwc2_set_ltq_params(struct dwc2_hsotg *hsotg)
 {
 	struct dwc2_core_params *p = &hsotg->params;
 
-	p->otg_cap = 2;
+	p->otg_caps.hnp_support = false;
+	p->otg_caps.srp_support = false;
 	p->host_rx_fifo_size = 288;
 	p->host_nperio_tx_fifo_size = 128;
 	p->host_perio_tx_fifo_size = 96;
@@ -111,7 +115,8 @@ static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg)
 {
 	struct dwc2_core_params *p = &hsotg->params;
 
-	p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+	p->otg_caps.hnp_support = false;
+	p->otg_caps.srp_support = false;
 	p->speed = DWC2_SPEED_PARAM_HIGH;
 	p->host_rx_fifo_size = 512;
 	p->host_nperio_tx_fifo_size = 500;
@@ -144,7 +149,8 @@ static void dwc2_set_stm32f4x9_fsotg_params(struct dwc2_hsotg *hsotg)
 {
 	struct dwc2_core_params *p = &hsotg->params;
 
-	p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+	p->otg_caps.hnp_support = false;
+	p->otg_caps.srp_support = false;
 	p->speed = DWC2_SPEED_PARAM_FULL;
 	p->host_rx_fifo_size = 128;
 	p->host_nperio_tx_fifo_size = 96;
@@ -168,7 +174,9 @@ static void dwc2_set_stm32mp15_fsotg_params(struct dwc2_hsotg *hsotg)
 {
 	struct dwc2_core_params *p = &hsotg->params;
 
-	p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+	p->otg_caps.hnp_support = false;
+	p->otg_caps.srp_support = false;
+	p->otg_caps.otg_rev = 0x200;
 	p->speed = DWC2_SPEED_PARAM_FULL;
 	p->host_rx_fifo_size = 128;
 	p->host_nperio_tx_fifo_size = 96;
@@ -188,7 +196,9 @@ static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg)
 {
 	struct dwc2_core_params *p = &hsotg->params;
 
-	p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+	p->otg_caps.hnp_support = false;
+	p->otg_caps.srp_support = false;
+	p->otg_caps.otg_rev = 0x200;
 	p->activate_stm_id_vb_detection = !device_property_read_bool(hsotg->dev, "usb-role-switch");
 	p->host_rx_fifo_size = 440;
 	p->host_nperio_tx_fifo_size = 256;
@@ -241,23 +251,22 @@ MODULE_DEVICE_TABLE(acpi, dwc2_acpi_match);
 
 static void dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg)
 {
-	u8 val;
-
 	switch (hsotg->hw_params.op_mode) {
 	case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
-		val = DWC2_CAP_PARAM_HNP_SRP_CAPABLE;
+		hsotg->params.otg_caps.hnp_support = true;
+		hsotg->params.otg_caps.srp_support = true;
 		break;
 	case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
 	case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
 	case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
-		val = DWC2_CAP_PARAM_SRP_ONLY_CAPABLE;
+		hsotg->params.otg_caps.hnp_support = false;
+		hsotg->params.otg_caps.srp_support = true;
 		break;
 	default:
-		val = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+		hsotg->params.otg_caps.hnp_support = false;
+		hsotg->params.otg_caps.srp_support = false;
 		break;
 	}
-
-	hsotg->params.otg_cap = val;
 }
 
 static void dwc2_set_param_phy_type(struct dwc2_hsotg *hsotg)
@@ -463,6 +472,8 @@ static void dwc2_get_device_properties(struct dwc2_hsotg *hsotg)
 						       &p->g_tx_fifo_size[1],
 						       num);
 		}
+
+		of_usb_update_otg_caps(hsotg->dev->of_node, &p->otg_caps);
 	}
 
 	if (of_find_property(hsotg->dev->of_node, "disable-over-current", NULL))
@@ -473,29 +484,27 @@ static void dwc2_check_param_otg_cap(struct dwc2_hsotg *hsotg)
 {
 	int valid = 1;
 
-	switch (hsotg->params.otg_cap) {
-	case DWC2_CAP_PARAM_HNP_SRP_CAPABLE:
+	if (hsotg->params.otg_caps.hnp_support && hsotg->params.otg_caps.srp_support) {
+		/* check HNP && SRP capable */
 		if (hsotg->hw_params.op_mode != GHWCFG2_OP_MODE_HNP_SRP_CAPABLE)
 			valid = 0;
-		break;
-	case DWC2_CAP_PARAM_SRP_ONLY_CAPABLE:
-		switch (hsotg->hw_params.op_mode) {
-		case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
-		case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
-		case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
-		case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
-			break;
-		default:
-			valid = 0;
-			break;
+	} else if (!hsotg->params.otg_caps.hnp_support) {
+		/* check SRP only capable */
+		if (hsotg->params.otg_caps.srp_support) {
+			switch (hsotg->hw_params.op_mode) {
+			case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
+			case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
+			case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
+			case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
+				break;
+			default:
+				valid = 0;
+				break;
+			}
 		}
-		break;
-	case DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE:
-		/* always valid */
-		break;
-	default:
+		/* else: NO HNP && NO SRP capable: always valid */
+	} else {
 		valid = 0;
-		break;
 	}
 
 	if (!valid)
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 66b1454c4db2..c483f28b695d 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -66,12 +66,13 @@ config USB_DWC3_OMAP
 	  Say 'Y' or 'M' here if you have one such device
 
 config USB_DWC3_EXYNOS
-	tristate "Samsung Exynos Platform"
+	tristate "Samsung Exynos SoC Platform"
 	depends on (ARCH_EXYNOS || COMPILE_TEST) && OF
 	default USB_DWC3
 	help
-	  Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside,
-	  say 'Y' or 'M' if you have one such device.
+	  Recent Samsung Exynos SoCs (Exynos5250, Exynos5410, Exynos542x,
+	  Exynos5800, Exynos5433, Exynos7) ship with one DesignWare Core USB3
+	  IP inside, say 'Y' or 'M' if you have one such device.
 
 config USB_DWC3_PCI
 	tristate "PCIe-based Platforms"
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 0104a80b185e..643239d7d370 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -26,6 +26,7 @@
 #include <linux/acpi.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/reset.h>
+#include <linux/bitfield.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
@@ -336,6 +337,29 @@ static void dwc3_frame_length_adjustment(struct dwc3 *dwc)
 }
 
 /**
+ * dwc3_ref_clk_period - Reference clock period configuration
+ *		Default reference clock period depends on hardware
+ *		configuration. For systems with reference clock that differs
+ *		from the default, this will set clock period in DWC3_GUCTL
+ *		register.
+ * @dwc: Pointer to our controller context structure
+ * @ref_clk_per: reference clock period in ns
+ */
+static void dwc3_ref_clk_period(struct dwc3 *dwc)
+{
+	u32 reg;
+
+	if (dwc->ref_clk_per == 0)
+		return;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUCTL);
+	reg &= ~DWC3_GUCTL_REFCLKPER_MASK;
+	reg |=  FIELD_PREP(DWC3_GUCTL_REFCLKPER_MASK, dwc->ref_clk_per);
+	dwc3_writel(dwc->regs, DWC3_GUCTL, reg);
+}
+
+
+/**
  * dwc3_free_one_event_buffer - Frees one event buffer
  * @dwc: Pointer to our controller context structure
  * @evt: Pointer to event buffer to be freed
@@ -1007,6 +1031,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
 	/* Adjust Frame Length */
 	dwc3_frame_length_adjustment(dwc);
 
+	/* Adjust Reference Clock Period */
+	dwc3_ref_clk_period(dwc);
+
 	dwc3_set_incr_burst_type(dwc);
 
 	usb_phy_set_suspend(dwc->usb2_phy, 0);
@@ -1389,6 +1416,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 				    &dwc->hsphy_interface);
 	device_property_read_u32(dev, "snps,quirk-frame-length-adjustment",
 				 &dwc->fladj);
+	device_property_read_u32(dev, "snps,ref-clock-period-ns",
+				 &dwc->ref_clk_per);
 
 	dwc->dis_metastability_quirk = device_property_read_bool(dev,
 				"snps,dis_metastability_quirk");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 5612bfdf37da..620c8d3914d7 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -387,6 +387,10 @@
 #define DWC3_GFLADJ_30MHZ_SDBND_SEL		BIT(7)
 #define DWC3_GFLADJ_30MHZ_MASK			0x3f
 
+/* Global User Control Register*/
+#define DWC3_GUCTL_REFCLKPER_MASK		0xffc00000
+#define DWC3_GUCTL_REFCLKPER_SEL		22
+
 /* Global User Control Register 2 */
 #define DWC3_GUCTL2_RST_ACTBITLATER		BIT(14)
 
@@ -711,21 +715,22 @@ struct dwc3_ep {
 
 	u32			saved_state;
 	unsigned int		flags;
-#define DWC3_EP_ENABLED		BIT(0)
-#define DWC3_EP_STALL		BIT(1)
-#define DWC3_EP_WEDGE		BIT(2)
-#define DWC3_EP_TRANSFER_STARTED BIT(3)
-#define DWC3_EP_END_TRANSFER_PENDING BIT(4)
-#define DWC3_EP_PENDING_REQUEST	BIT(5)
-#define DWC3_EP_DELAY_START	BIT(6)
+#define DWC3_EP_ENABLED			BIT(0)
+#define DWC3_EP_STALL			BIT(1)
+#define DWC3_EP_WEDGE			BIT(2)
+#define DWC3_EP_TRANSFER_STARTED	BIT(3)
+#define DWC3_EP_END_TRANSFER_PENDING	BIT(4)
+#define DWC3_EP_PENDING_REQUEST		BIT(5)
+#define DWC3_EP_DELAY_START		BIT(6)
 #define DWC3_EP_WAIT_TRANSFER_COMPLETE	BIT(7)
 #define DWC3_EP_IGNORE_NEXT_NOSTREAM	BIT(8)
 #define DWC3_EP_FORCE_RESTART_STREAM	BIT(9)
 #define DWC3_EP_FIRST_STREAM_PRIMED	BIT(10)
 #define DWC3_EP_PENDING_CLEAR_STALL	BIT(11)
+#define DWC3_EP_TXFIFO_RESIZED		BIT(12)
 
 	/* This last one is specific to EP0 */
-#define DWC3_EP0_DIR_IN		BIT(31)
+#define DWC3_EP0_DIR_IN			BIT(31)
 
 	/*
 	 * IMPORTANT: we *know* we have 256 TRBs in our @trb_pool, so we will
@@ -970,6 +975,7 @@ struct dwc3_scratchpad_array {
  * @regs: base address for our registers
  * @regs_size: address space size
  * @fladj: frame length adjustment
+ * @ref_clk_per: reference clock period configuration
  * @irq_gadget: peripheral controller's IRQ number
  * @otg_irq: IRQ number for OTG IRQs
  * @current_otg_role: current role of operation while using the OTG block
@@ -1027,6 +1033,7 @@ struct dwc3_scratchpad_array {
  * @tx_fifo_resize_max_num: max number of fifos allocated during txfifo resize
  * @hsphy_interface: "utmi" or "ulpi"
  * @connected: true when we're connected to a host, false otherwise
+ * @softconnect: true when gadget connect is called, false when disconnect runs
  * @delayed_status: true when gadget driver asks for delayed status
  * @ep0_bounced: true when we used bounce buffer
  * @ep0_expect_in: true when we expect a DATA IN transfer
@@ -1149,6 +1156,7 @@ struct dwc3 {
 	struct power_supply	*usb_psy;
 
 	u32			fladj;
+	u32			ref_clk_per;
 	u32			irq_gadget;
 	u32			otg_irq;
 	u32			current_otg_role;
@@ -1246,6 +1254,7 @@ struct dwc3 {
 	const char		*hsphy_interface;
 
 	unsigned		connected:1;
+	unsigned		softconnect:1;
 	unsigned		delayed_status:1;
 	unsigned		ep0_bounced:1;
 	unsigned		ep0_expect_in:1;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 4519d06c9ca2..23de2a5a40d6 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -702,6 +702,7 @@ void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc)
 				   DWC31_GTXFIFOSIZ_TXFRAMNUM;
 
 		dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num >> 1), size);
+		dep->flags &= ~DWC3_EP_TXFIFO_RESIZED;
 	}
 	dwc->num_ep_resized = 0;
 }
@@ -747,6 +748,10 @@ static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep)
 	if (!usb_endpoint_dir_in(dep->endpoint.desc) || dep->number <= 1)
 		return 0;
 
+	/* bail if already resized */
+	if (dep->flags & DWC3_EP_TXFIFO_RESIZED)
+		return 0;
+
 	ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
 
 	if ((dep->endpoint.maxburst > 1 &&
@@ -807,6 +812,7 @@ static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep)
 	}
 
 	dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1), fifo_size);
+	dep->flags |= DWC3_EP_TXFIFO_RESIZED;
 	dwc->num_ep_resized++;
 
 	return 0;
@@ -995,7 +1001,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 
 	dep->stream_capable = false;
 	dep->type = 0;
-	dep->flags = 0;
+	dep->flags &= DWC3_EP_TXFIFO_RESIZED;
 
 	return 0;
 }
@@ -1813,7 +1819,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 	struct dwc3		*dwc = dep->dwc;
 
 	if (!dep->endpoint.desc || !dwc->pullups_connected || !dwc->connected) {
-		dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
+		dev_dbg(dwc->dev, "%s: can't queue to disabled endpoint\n",
 				dep->name);
 		return -ESHUTDOWN;
 	}
@@ -2418,7 +2424,7 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 	int			ret;
 
 	is_on = !!is_on;
-
+	dwc->softconnect = is_on;
 	/*
 	 * Per databook, when we want to stop the gadget, if a control transfer
 	 * is still in process, complete it and get the core into setup phase.
@@ -4352,7 +4358,7 @@ int dwc3_gadget_resume(struct dwc3 *dwc)
 {
 	int			ret;
 
-	if (!dwc->gadget_driver)
+	if (!dwc->gadget_driver || !dwc->softconnect)
 		return 0;
 
 	ret = __dwc3_gadget_start(dwc);
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 477e72a1d11e..36c611d1d8d0 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -73,6 +73,11 @@ static inline struct config_usb_cfg *to_config_usb_cfg(struct config_item *item)
 			group);
 }
 
+static inline struct gadget_info *cfg_to_gadget_info(struct config_usb_cfg *cfg)
+{
+	return container_of(cfg->c.cdev, struct gadget_info, cdev);
+}
+
 struct gadget_strings {
 	struct usb_gadget_strings stringtab_dev;
 	struct usb_string strings[USB_GADGET_FIRST_AVAIL_IDX];
@@ -413,8 +418,7 @@ static int config_usb_cfg_link(
 	struct config_item *usb_func_ci)
 {
 	struct config_usb_cfg *cfg = to_config_usb_cfg(usb_cfg_ci);
-	struct usb_composite_dev *cdev = cfg->c.cdev;
-	struct gadget_info *gi = container_of(cdev, struct gadget_info, cdev);
+	struct gadget_info *gi = cfg_to_gadget_info(cfg);
 
 	struct config_group *group = to_config_group(usb_func_ci);
 	struct usb_function_instance *fi = container_of(group,
@@ -464,8 +468,7 @@ static void config_usb_cfg_unlink(
 	struct config_item *usb_func_ci)
 {
 	struct config_usb_cfg *cfg = to_config_usb_cfg(usb_cfg_ci);
-	struct usb_composite_dev *cdev = cfg->c.cdev;
-	struct gadget_info *gi = container_of(cdev, struct gadget_info, cdev);
+	struct gadget_info *gi = cfg_to_gadget_info(cfg);
 
 	struct config_group *group = to_config_group(usb_func_ci);
 	struct usb_function_instance *fi = container_of(group,
@@ -505,12 +508,15 @@ static struct configfs_item_operations gadget_config_item_ops = {
 static ssize_t gadget_config_desc_MaxPower_show(struct config_item *item,
 		char *page)
 {
-	return sprintf(page, "%u\n", to_config_usb_cfg(item)->c.MaxPower);
+	struct config_usb_cfg *cfg = to_config_usb_cfg(item);
+
+	return sprintf(page, "%u\n", cfg->c.MaxPower);
 }
 
 static ssize_t gadget_config_desc_MaxPower_store(struct config_item *item,
 		const char *page, size_t len)
 {
+	struct config_usb_cfg *cfg = to_config_usb_cfg(item);
 	u16 val;
 	int ret;
 	ret = kstrtou16(page, 0, &val);
@@ -518,20 +524,22 @@ static ssize_t gadget_config_desc_MaxPower_store(struct config_item *item,
 		return ret;
 	if (DIV_ROUND_UP(val, 8) > 0xff)
 		return -ERANGE;
-	to_config_usb_cfg(item)->c.MaxPower = val;
+	cfg->c.MaxPower = val;
 	return len;
 }
 
 static ssize_t gadget_config_desc_bmAttributes_show(struct config_item *item,
 		char *page)
 {
-	return sprintf(page, "0x%02x\n",
-		to_config_usb_cfg(item)->c.bmAttributes);
+	struct config_usb_cfg *cfg = to_config_usb_cfg(item);
+
+	return sprintf(page, "0x%02x\n", cfg->c.bmAttributes);
 }
 
 static ssize_t gadget_config_desc_bmAttributes_store(struct config_item *item,
 		const char *page, size_t len)
 {
+	struct config_usb_cfg *cfg = to_config_usb_cfg(item);
 	u8 val;
 	int ret;
 	ret = kstrtou8(page, 0, &val);
@@ -542,7 +550,7 @@ static ssize_t gadget_config_desc_bmAttributes_store(struct config_item *item,
 	if (val & ~(USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER |
 				USB_CONFIG_ATT_WAKEUP))
 		return -EINVAL;
-	to_config_usb_cfg(item)->c.bmAttributes = val;
+	cfg->c.bmAttributes = val;
 	return len;
 }
 
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 1eb4fa2e623f..ed5a92c474e5 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -181,7 +181,7 @@ EXPORT_SYMBOL_GPL(usb_ep_autoconfig);
  * This function can be used during function bind for endpoints obtained
  * from usb_ep_autoconfig(). It unclaims endpoint claimed by
  * usb_ep_autoconfig() to make it available for other functions. Endpoint
- * which was released is no longer invalid and shouldn't be used in
+ * which was released is no longer valid and shouldn't be used in
  * context of function which released it.
  */
 void usb_ep_autoconfig_release(struct usb_ep *ep)
diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
index 6ad669dde41c..752439690fda 100644
--- a/drivers/usb/gadget/function/f_mass_storage.c
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -588,7 +588,7 @@ static int sleep_thread(struct fsg_common *common, bool can_freeze,
 static int do_read(struct fsg_common *common)
 {
 	struct fsg_lun		*curlun = common->curlun;
-	u32			lba;
+	u64			lba;
 	struct fsg_buffhd	*bh;
 	int			rc;
 	u32			amount_left;
@@ -603,7 +603,10 @@ static int do_read(struct fsg_common *common)
 	if (common->cmnd[0] == READ_6)
 		lba = get_unaligned_be24(&common->cmnd[1]);
 	else {
-		lba = get_unaligned_be32(&common->cmnd[2]);
+		if (common->cmnd[0] == READ_16)
+			lba = get_unaligned_be64(&common->cmnd[2]);
+		else		/* READ_10 or READ_12 */
+			lba = get_unaligned_be32(&common->cmnd[2]);
 
 		/*
 		 * We allow DPO (Disable Page Out = don't save data in the
@@ -716,7 +719,7 @@ static int do_read(struct fsg_common *common)
 static int do_write(struct fsg_common *common)
 {
 	struct fsg_lun		*curlun = common->curlun;
-	u32			lba;
+	u64			lba;
 	struct fsg_buffhd	*bh;
 	int			get_some_more;
 	u32			amount_left_to_req, amount_left_to_write;
@@ -740,7 +743,10 @@ static int do_write(struct fsg_common *common)
 	if (common->cmnd[0] == WRITE_6)
 		lba = get_unaligned_be24(&common->cmnd[1]);
 	else {
-		lba = get_unaligned_be32(&common->cmnd[2]);
+		if (common->cmnd[0] == WRITE_16)
+			lba = get_unaligned_be64(&common->cmnd[2]);
+		else		/* WRITE_10 or WRITE_12 */
+			lba = get_unaligned_be32(&common->cmnd[2]);
 
 		/*
 		 * We allow DPO (Disable Page Out = don't save data in the
@@ -1115,6 +1121,7 @@ static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
 	int		pmi = common->cmnd[8];
 	u8		*buf = (u8 *)bh->buf;
+	u32		max_lba;
 
 	/* Check the PMI and LBA fields */
 	if (pmi > 1 || (pmi == 0 && lba != 0)) {
@@ -1122,12 +1129,37 @@ static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
 		return -EINVAL;
 	}
 
-	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
-						/* Max logical block */
-	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
+	if (curlun->num_sectors < 0x100000000ULL)
+		max_lba = curlun->num_sectors - 1;
+	else
+		max_lba = 0xffffffff;
+	put_unaligned_be32(max_lba, &buf[0]);		/* Max logical block */
+	put_unaligned_be32(curlun->blksize, &buf[4]);	/* Block length */
 	return 8;
 }
 
+static int do_read_capacity_16(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	struct fsg_lun  *curlun = common->curlun;
+	u64		lba = get_unaligned_be64(&common->cmnd[2]);
+	int		pmi = common->cmnd[14];
+	u8		*buf = (u8 *)bh->buf;
+
+	/* Check the PMI and LBA fields */
+	if (pmi > 1 || (pmi == 0 && lba != 0)) {
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+
+	put_unaligned_be64(curlun->num_sectors - 1, &buf[0]);
+							/* Max logical block */
+	put_unaligned_be32(curlun->blksize, &buf[8]);	/* Block length */
+
+	/* It is safe to keep other fields zeroed */
+	memset(&buf[12], 0, 32 - 12);
+	return 32;
+}
+
 static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh)
 {
 	struct fsg_lun	*curlun = common->curlun;
@@ -1874,6 +1906,17 @@ static int do_scsi_command(struct fsg_common *common)
 			reply = do_read(common);
 		break;
 
+	case READ_16:
+		common->data_size_from_cmnd =
+				get_unaligned_be32(&common->cmnd[10]);
+		reply = check_command_size_in_blocks(common, 16,
+				      DATA_DIR_TO_HOST,
+				      (1<<1) | (0xff<<2) | (0xf<<10), 1,
+				      "READ(16)");
+		if (reply == 0)
+			reply = do_read(common);
+		break;
+
 	case READ_CAPACITY:
 		common->data_size_from_cmnd = 8;
 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
@@ -1926,6 +1969,25 @@ static int do_scsi_command(struct fsg_common *common)
 			reply = do_request_sense(common, bh);
 		break;
 
+	case SERVICE_ACTION_IN_16:
+		switch (common->cmnd[1] & 0x1f) {
+
+		case SAI_READ_CAPACITY_16:
+			common->data_size_from_cmnd =
+				get_unaligned_be32(&common->cmnd[10]);
+			reply = check_command(common, 16, DATA_DIR_TO_HOST,
+					      (1<<1) | (0xff<<2) | (0xf<<10) |
+					      (1<<14), 1,
+					      "READ CAPACITY(16)");
+			if (reply == 0)
+				reply = do_read_capacity_16(common, bh);
+			break;
+
+		default:
+			goto unknown_cmnd;
+		}
+		break;
+
 	case START_STOP:
 		common->data_size_from_cmnd = 0;
 		reply = check_command(common, 6, DATA_DIR_NONE,
@@ -1997,6 +2059,17 @@ static int do_scsi_command(struct fsg_common *common)
 			reply = do_write(common);
 		break;
 
+	case WRITE_16:
+		common->data_size_from_cmnd =
+				get_unaligned_be32(&common->cmnd[10]);
+		reply = check_command_size_in_blocks(common, 16,
+				      DATA_DIR_FROM_HOST,
+				      (1<<1) | (0xff<<2) | (0xf<<10), 1,
+				      "WRITE(16)");
+		if (reply == 0)
+			reply = do_write(common);
+		break;
+
 	/*
 	 * Some mandatory commands that we recognize but don't implement.
 	 * They don't mean much in this setting.  It's left as an exercise
@@ -2269,6 +2342,16 @@ static void fsg_disable(struct usb_function *f)
 {
 	struct fsg_dev *fsg = fsg_from_func(f);
 
+	/* Disable the endpoints */
+	if (fsg->bulk_in_enabled) {
+		usb_ep_disable(fsg->bulk_in);
+		fsg->bulk_in_enabled = 0;
+	}
+	if (fsg->bulk_out_enabled) {
+		usb_ep_disable(fsg->bulk_out);
+		fsg->bulk_out_enabled = 0;
+	}
+
 	__raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL);
 }
 
diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c
index 5b3502df4e13..03f50643fbba 100644
--- a/drivers/usb/gadget/function/f_uac1.c
+++ b/drivers/usb/gadget/function/f_uac1.c
@@ -1321,6 +1321,7 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f)
 		audio->params.c_fu.volume_res = audio_opts->c_volume_res;
 	}
 	audio->params.req_number = audio_opts->req_number;
+	audio->params.fb_max = FBACK_FAST_MAX;
 	if (FUOUT_EN(audio_opts) || FUIN_EN(audio_opts))
 		audio->notify = audio_notify;
 
diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
index ef55b8bb5870..36fa6ef0581b 100644
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 
 #include "u_audio.h"
+
 #include "u_uac2.h"
 
 /* UAC2 spec: 4.1 Audio Channel Cluster Descriptor */
@@ -674,8 +675,9 @@ static int set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
 		ssize = uac2_opts->c_ssize;
 	}
 
-	if (!is_playback && (uac2_opts->c_sync == USB_ENDPOINT_SYNC_ASYNC)) {
-	  // Win10 requires max packet size + 1 frame
+	if (is_playback || (uac2_opts->c_sync == USB_ENDPOINT_SYNC_ASYNC)) {
+		// playback is always async, capture only when configured
+		// Win10 requires max packet size + 1 frame
 		srate = srate * (1000 + uac2_opts->fb_max) / 1000;
 		// updated srate is always bigger, therefore DIV_ROUND_UP always yields +1
 		max_size_bw = num_channels(chmask) * ssize *
@@ -760,15 +762,15 @@ static void setup_headers(struct f_uac2_opts *opts,
 		headers[i++] = USBDHDR(&out_clk_src_desc);
 		headers[i++] = USBDHDR(&usb_out_it_desc);
 
-    if (FUOUT_EN(opts))
-      headers[i++] = USBDHDR(out_feature_unit_desc);
-  }
+		if (FUOUT_EN(opts))
+			headers[i++] = USBDHDR(out_feature_unit_desc);
+	}
 
 	if (EPIN_EN(opts)) {
 		headers[i++] = USBDHDR(&io_in_it_desc);
 
-    if (FUIN_EN(opts))
-      headers[i++] = USBDHDR(in_feature_unit_desc);
+		if (FUIN_EN(opts))
+			headers[i++] = USBDHDR(in_feature_unit_desc);
 
 		headers[i++] = USBDHDR(&usb_in_ot_desc);
 	}
@@ -776,10 +778,10 @@ static void setup_headers(struct f_uac2_opts *opts,
 	if (EPOUT_EN(opts))
 		headers[i++] = USBDHDR(&io_out_ot_desc);
 
-  if (FUOUT_EN(opts) || FUIN_EN(opts))
-      headers[i++] = USBDHDR(ep_int_desc);
+	if (FUOUT_EN(opts) || FUIN_EN(opts))
+		headers[i++] = USBDHDR(ep_int_desc);
 
-  if (EPOUT_EN(opts)) {
+	if (EPOUT_EN(opts)) {
 		headers[i++] = USBDHDR(&std_as_out_if0_desc);
 		headers[i++] = USBDHDR(&std_as_out_if1_desc);
 		headers[i++] = USBDHDR(&as_out_hdr_desc);
@@ -1931,7 +1933,7 @@ static struct usb_function_instance *afunc_alloc_inst(void)
 	opts->c_volume_res = UAC2_DEF_RES_DB;
 
 	opts->req_number = UAC2_DEF_REQ_NUM;
-	opts->fb_max = UAC2_DEF_FB_MAX;
+	opts->fb_max = FBACK_FAST_MAX;
 	return &opts->func_inst;
 }
 
diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index 9d87c0fb8f92..71bb5e477dba 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -417,6 +417,7 @@ uvc_register_video(struct uvc_device *uvc)
 	int ret;
 
 	/* TODO reference counting. */
+	memset(&uvc->vdev, 0, sizeof(uvc->video));
 	uvc->vdev.v4l2_dev = &uvc->v4l2_dev;
 	uvc->vdev.v4l2_dev->dev = &cdev->gadget->dev;
 	uvc->vdev.fops = &uvc_v4l2_fops;
@@ -884,12 +885,13 @@ static void uvc_free(struct usb_function *f)
 	kfree(uvc);
 }
 
-static void uvc_unbind(struct usb_configuration *c, struct usb_function *f)
+static void uvc_function_unbind(struct usb_configuration *c,
+				struct usb_function *f)
 {
 	struct usb_composite_dev *cdev = c->cdev;
 	struct uvc_device *uvc = to_uvc(f);
 
-	uvcg_info(f, "%s\n", __func__);
+	uvcg_info(f, "%s()\n", __func__);
 
 	device_remove_file(&uvc->vdev.dev, &dev_attr_function_name);
 	video_unregister_device(&uvc->vdev);
@@ -943,7 +945,7 @@ static struct usb_function *uvc_alloc(struct usb_function_instance *fi)
 	/* Register the function. */
 	uvc->func.name = "uvc";
 	uvc->func.bind = uvc_function_bind;
-	uvc->func.unbind = uvc_unbind;
+	uvc->func.unbind = uvc_function_unbind;
 	uvc->func.get_alt = uvc_function_get_alt;
 	uvc->func.set_alt = uvc_function_set_alt;
 	uvc->func.disable = uvc_function_disable;
diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
index ad16163b5ff8..c46400be5464 100644
--- a/drivers/usb/gadget/function/u_audio.c
+++ b/drivers/usb/gadget/function/u_audio.c
@@ -29,6 +29,7 @@
 
 enum {
 	UAC_FBACK_CTRL,
+	UAC_P_PITCH_CTRL,
 	UAC_MUTE_CTRL,
 	UAC_VOLUME_CTRL,
 };
@@ -74,13 +75,9 @@ struct snd_uac_chip {
 	struct snd_card *card;
 	struct snd_pcm *pcm;
 
-	/* timekeeping for the playback endpoint */
-	unsigned int p_interval;
-	unsigned int p_residue;
-
 	/* pre-calculated values for playback iso completion */
-	unsigned int p_pktsize;
-	unsigned int p_pktsize_residue;
+	unsigned long long p_interval_mil;
+	unsigned long long p_residue_mil;
 	unsigned int p_framesize;
 };
 
@@ -153,6 +150,11 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req)
 	struct snd_pcm_runtime *runtime;
 	struct uac_rtd_params *prm = req->context;
 	struct snd_uac_chip *uac = prm->uac;
+	struct g_audio *audio_dev = uac->audio_dev;
+	struct uac_params *params = &audio_dev->params;
+	unsigned int frames, p_pktsize;
+	unsigned long long pitched_rate_mil, p_pktsize_residue_mil,
+			residue_frames_mil, div_result;
 
 	/* i/f shutting down */
 	if (!prm->ep_enabled) {
@@ -192,19 +194,42 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req)
 		 * If there is a residue from this division, add it to the
 		 * residue accumulator.
 		 */
-		req->length = uac->p_pktsize;
-		uac->p_residue += uac->p_pktsize_residue;
+		pitched_rate_mil = (unsigned long long)
+				params->p_srate * prm->pitch;
+		div_result = pitched_rate_mil;
+		do_div(div_result, uac->p_interval_mil);
+		frames = (unsigned int) div_result;
+
+		pr_debug("p_srate %d, pitch %d, interval_mil %llu, frames %d\n",
+				params->p_srate, prm->pitch, uac->p_interval_mil, frames);
+
+		p_pktsize = min_t(unsigned int,
+					uac->p_framesize * frames,
+					ep->maxpacket);
+
+		if (p_pktsize < ep->maxpacket) {
+			residue_frames_mil = pitched_rate_mil - frames * uac->p_interval_mil;
+			p_pktsize_residue_mil = uac->p_framesize * residue_frames_mil;
+		} else
+			p_pktsize_residue_mil = 0;
+
+		req->length = p_pktsize;
+		uac->p_residue_mil += p_pktsize_residue_mil;
 
 		/*
-		 * Whenever there are more bytes in the accumulator than we
+		 * Whenever there are more bytes in the accumulator p_residue_mil than we
 		 * need to add one more sample frame, increase this packet's
 		 * size and decrease the accumulator.
 		 */
-		if (uac->p_residue / uac->p_interval >= uac->p_framesize) {
+		div_result = uac->p_residue_mil;
+		do_div(div_result, uac->p_interval_mil);
+		if ((unsigned int) div_result >= uac->p_framesize) {
 			req->length += uac->p_framesize;
-			uac->p_residue -= uac->p_framesize *
-					   uac->p_interval;
+			uac->p_residue_mil -= uac->p_framesize *
+					   uac->p_interval_mil;
+			pr_debug("increased req length to %d\n", req->length);
 		}
+		pr_debug("remains uac->p_residue_mil %llu\n", uac->p_residue_mil);
 
 		req->actual = req->length;
 	}
@@ -371,7 +396,7 @@ static int uac_pcm_open(struct snd_pcm_substream *substream)
 	c_srate = params->c_srate;
 	p_chmask = params->p_chmask;
 	c_chmask = params->c_chmask;
-	uac->p_residue = 0;
+	uac->p_residue_mil = 0;
 
 	runtime->hw = uac_pcm_hardware;
 
@@ -566,12 +591,17 @@ int u_audio_start_playback(struct g_audio *audio_dev)
 	unsigned int factor;
 	const struct usb_endpoint_descriptor *ep_desc;
 	int req_len, i;
+	unsigned int p_interval, p_pktsize;
 
 	ep = audio_dev->in_ep;
 	prm = &uac->p_prm;
 	config_ep_by_speed(gadget, &audio_dev->func, ep);
 
 	ep_desc = ep->desc;
+	/*
+	 * Always start with original frequency
+	 */
+	prm->pitch = 1000000;
 
 	/* pre-calculate the playback endpoint's interval */
 	if (gadget->speed == USB_SPEED_FULL)
@@ -582,20 +612,15 @@ int u_audio_start_playback(struct g_audio *audio_dev)
 	/* pre-compute some values for iso_complete() */
 	uac->p_framesize = params->p_ssize *
 			    num_channels(params->p_chmask);
-	uac->p_interval = factor / (1 << (ep_desc->bInterval - 1));
-	uac->p_pktsize = min_t(unsigned int,
+	p_interval = factor / (1 << (ep_desc->bInterval - 1));
+	uac->p_interval_mil = (unsigned long long) p_interval * 1000000;
+	p_pktsize = min_t(unsigned int,
 				uac->p_framesize *
-					(params->p_srate / uac->p_interval),
+					(params->p_srate / p_interval),
 				ep->maxpacket);
 
-	if (uac->p_pktsize < ep->maxpacket)
-		uac->p_pktsize_residue = uac->p_framesize *
-			(params->p_srate % uac->p_interval);
-	else
-		uac->p_pktsize_residue = 0;
-
-	req_len = uac->p_pktsize;
-	uac->p_residue = 0;
+	req_len = p_pktsize;
+	uac->p_residue_mil = 0;
 
 	prm->ep_enabled = true;
 	usb_ep_enable(ep);
@@ -925,6 +950,13 @@ static struct snd_kcontrol_new u_audio_controls[]  = {
     .get =          u_audio_pitch_get,
     .put =          u_audio_pitch_put,
   },
+	[UAC_P_PITCH_CTRL] {
+		.iface =        SNDRV_CTL_ELEM_IFACE_PCM,
+		.name =         "Playback Pitch 1000000",
+		.info =         u_audio_pitch_info,
+		.get =          u_audio_pitch_get,
+		.put =          u_audio_pitch_put,
+	},
   [UAC_MUTE_CTRL] {
 		.iface =	SNDRV_CTL_ELEM_IFACE_MIXER,
 		.name =		"", /* will be filled later */
@@ -1062,6 +1094,22 @@ int g_audio_setup(struct g_audio *g_audio, const char *pcm_name,
 			goto snd_fail;
 	}
 
+	if (p_chmask) {
+		kctl = snd_ctl_new1(&u_audio_controls[UAC_P_PITCH_CTRL],
+				    &uac->p_prm);
+		if (!kctl) {
+			err = -ENOMEM;
+			goto snd_fail;
+		}
+
+		kctl->id.device = pcm->device;
+		kctl->id.subdevice = 0;
+
+		err = snd_ctl_add(card, kctl);
+		if (err < 0)
+			goto snd_fail;
+	}
+
 	for (i = 0; i <= SNDRV_PCM_STREAM_LAST; i++) {
 		struct uac_rtd_params *prm;
 		struct uac_fu_params *fu;
diff --git a/drivers/usb/gadget/function/u_audio.h b/drivers/usb/gadget/function/u_audio.h
index 001a79a46022..8dfdae1721cd 100644
--- a/drivers/usb/gadget/function/u_audio.h
+++ b/drivers/usb/gadget/function/u_audio.h
@@ -14,11 +14,17 @@
 /*
  * Same maximum frequency deviation on the slower side as in
  * sound/usb/endpoint.c. Value is expressed in per-mil deviation.
- * The maximum deviation on the faster side will be provided as
- * parameter, as it impacts the endpoint required bandwidth.
  */
 #define FBACK_SLOW_MAX	250
 
+/*
+ * Maximum frequency deviation on the faster side, default value for UAC1/2.
+ * Value is expressed in per-mil deviation.
+ * UAC2 provides the value as a parameter as it impacts the endpoint required
+ * bandwidth.
+ */
+#define FBACK_FAST_MAX 5
+
 /* Feature Unit parameters */
 struct uac_fu_params {
 	int id;			/* Feature Unit ID */
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 85a3f6d4b5af..e0ad5aed6ac9 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -754,6 +754,7 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g,
 	struct eth_dev		*dev;
 	struct net_device	*net;
 	int			status;
+	u8			addr[ETH_ALEN];
 
 	net = alloc_etherdev(sizeof *dev);
 	if (!net)
@@ -773,9 +774,10 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g,
 	dev->qmult = qmult;
 	snprintf(net->name, sizeof(net->name), "%s%%d", netname);
 
-	if (get_ether_addr(dev_addr, net->dev_addr))
+	if (get_ether_addr(dev_addr, addr))
 		dev_warn(&g->dev,
 			"using random %s ethernet address\n", "self");
+	eth_hw_addr_set(net, addr);
 	if (get_ether_addr(host_addr, dev->host_mac))
 		dev_warn(&g->dev,
 			"using random %s ethernet address\n", "host");
diff --git a/drivers/usb/gadget/function/u_uac2.h b/drivers/usb/gadget/function/u_uac2.h
index a73b35774c44..e0c8e3513bfd 100644
--- a/drivers/usb/gadget/function/u_uac2.h
+++ b/drivers/usb/gadget/function/u_uac2.h
@@ -30,7 +30,6 @@
 #define UAC2_DEF_RES_DB		(1*256)		/* 1 dB */
 
 #define UAC2_DEF_REQ_NUM 2
-#define UAC2_DEF_FB_MAX 5
 #define UAC2_DEF_INT_REQ_NUM	10
 
 struct f_uac2_opts {
diff --git a/drivers/usb/gadget/function/uvc.h b/drivers/usb/gadget/function/uvc.h
index 255a61bd6a6a..c3607a32b986 100644
--- a/drivers/usb/gadget/function/uvc.h
+++ b/drivers/usb/gadget/function/uvc.h
@@ -68,6 +68,8 @@ extern unsigned int uvc_gadget_trace_param;
 #define UVC_MAX_REQUEST_SIZE			64
 #define UVC_MAX_EVENTS				4
 
+#define UVCG_REQUEST_HEADER_LEN			12
+
 /* ------------------------------------------------------------------------
  * Structures
  */
@@ -76,7 +78,7 @@ struct uvc_request {
 	u8 *req_buffer;
 	struct uvc_video *video;
 	struct sg_table sgt;
-	u8 header[2];
+	u8 header[UVCG_REQUEST_HEADER_LEN];
 };
 
 struct uvc_video {
@@ -126,6 +128,7 @@ struct uvc_device {
 	enum uvc_state state;
 	struct usb_function func;
 	struct uvc_video video;
+	bool func_connected;
 
 	/* Descriptors */
 	struct {
@@ -156,6 +159,7 @@ static inline struct uvc_device *to_uvc(struct usb_function *f)
 struct uvc_file_handle {
 	struct v4l2_fh vfh;
 	struct uvc_video *device;
+	bool is_uvc_app_handle;
 };
 
 #define to_uvc_file_handle(handle) \
diff --git a/drivers/usb/gadget/function/uvc_queue.c b/drivers/usb/gadget/function/uvc_queue.c
index 7d00ad7c154c..d852ac9e47e7 100644
--- a/drivers/usb/gadget/function/uvc_queue.c
+++ b/drivers/usb/gadget/function/uvc_queue.c
@@ -142,7 +142,7 @@ int uvcg_queue_init(struct uvc_video_queue *queue, struct device *dev, enum v4l2
 		queue->queue.mem_ops = &vb2_vmalloc_memops;
 	}
 
-	queue->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC
+	queue->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY
 				     | V4L2_BUF_FLAG_TSTAMP_SRC_EOF;
 	queue->queue.dev = dev;
 
diff --git a/drivers/usb/gadget/function/uvc_v4l2.c b/drivers/usb/gadget/function/uvc_v4l2.c
index 4ca89eab6159..a2c78690c5c2 100644
--- a/drivers/usb/gadget/function/uvc_v4l2.c
+++ b/drivers/usb/gadget/function/uvc_v4l2.c
@@ -169,7 +169,8 @@ uvc_v4l2_qbuf(struct file *file, void *fh, struct v4l2_buffer *b)
 	if (ret < 0)
 		return ret;
 
-	schedule_work(&video->pump);
+	if (uvc->state == UVC_STATE_STREAMING)
+		schedule_work(&video->pump);
 
 	return ret;
 }
@@ -227,17 +228,55 @@ static int
 uvc_v4l2_subscribe_event(struct v4l2_fh *fh,
 			 const struct v4l2_event_subscription *sub)
 {
+	struct uvc_device *uvc = video_get_drvdata(fh->vdev);
+	struct uvc_file_handle *handle = to_uvc_file_handle(fh);
+	int ret;
+
 	if (sub->type < UVC_EVENT_FIRST || sub->type > UVC_EVENT_LAST)
 		return -EINVAL;
 
-	return v4l2_event_subscribe(fh, sub, 2, NULL);
+	if (sub->type == UVC_EVENT_SETUP && uvc->func_connected)
+		return -EBUSY;
+
+	ret = v4l2_event_subscribe(fh, sub, 2, NULL);
+	if (ret < 0)
+		return ret;
+
+	if (sub->type == UVC_EVENT_SETUP) {
+		uvc->func_connected = true;
+		handle->is_uvc_app_handle = true;
+		uvc_function_connect(uvc);
+	}
+
+	return 0;
+}
+
+static void uvc_v4l2_disable(struct uvc_device *uvc)
+{
+	uvc->func_connected = false;
+	uvc_function_disconnect(uvc);
+	uvcg_video_enable(&uvc->video, 0);
+	uvcg_free_buffers(&uvc->video.queue);
 }
 
 static int
 uvc_v4l2_unsubscribe_event(struct v4l2_fh *fh,
 			   const struct v4l2_event_subscription *sub)
 {
-	return v4l2_event_unsubscribe(fh, sub);
+	struct uvc_device *uvc = video_get_drvdata(fh->vdev);
+	struct uvc_file_handle *handle = to_uvc_file_handle(fh);
+	int ret;
+
+	ret = v4l2_event_unsubscribe(fh, sub);
+	if (ret < 0)
+		return ret;
+
+	if (sub->type == UVC_EVENT_SETUP && handle->is_uvc_app_handle) {
+		uvc_v4l2_disable(uvc);
+		handle->is_uvc_app_handle = false;
+	}
+
+	return 0;
 }
 
 static long
@@ -292,7 +331,6 @@ uvc_v4l2_open(struct file *file)
 	handle->device = &uvc->video;
 	file->private_data = &handle->vfh;
 
-	uvc_function_connect(uvc);
 	return 0;
 }
 
@@ -304,11 +342,9 @@ uvc_v4l2_release(struct file *file)
 	struct uvc_file_handle *handle = to_uvc_file_handle(file->private_data);
 	struct uvc_video *video = handle->device;
 
-	uvc_function_disconnect(uvc);
-
 	mutex_lock(&video->mutex);
-	uvcg_video_enable(video, 0);
-	uvcg_free_buffers(&video->queue);
+	if (handle->is_uvc_app_handle)
+		uvc_v4l2_disable(uvc);
 	mutex_unlock(&video->mutex);
 
 	file->private_data = NULL;
diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
index b4a763e5f70e..7f59a0c47402 100644
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -12,6 +12,7 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/video.h>
+#include <asm/unaligned.h>
 
 #include <media/v4l2-dev.h>
 
@@ -27,13 +28,41 @@ static int
 uvc_video_encode_header(struct uvc_video *video, struct uvc_buffer *buf,
 		u8 *data, int len)
 {
-	data[0] = UVCG_REQUEST_HEADER_LEN;
+	struct uvc_device *uvc = container_of(video, struct uvc_device, video);
+	struct usb_composite_dev *cdev = uvc->func.config->cdev;
+	struct timespec64 ts = ns_to_timespec64(buf->buf.vb2_buf.timestamp);
+	int pos = 2;
+
 	data[1] = UVC_STREAM_EOH | video->fid;
 
-	if (buf->bytesused - video->queue.buf_used <= len - UVCG_REQUEST_HEADER_LEN)
+	if (video->queue.buf_used == 0 && ts.tv_sec) {
+		/* dwClockFrequency is 48 MHz */
+		u32 pts = ((u64)ts.tv_sec * USEC_PER_SEC + ts.tv_nsec / NSEC_PER_USEC) * 48;
+
+		data[1] |= UVC_STREAM_PTS;
+		put_unaligned_le32(pts, &data[pos]);
+		pos += 4;
+	}
+
+	if (cdev->gadget->ops->get_frame) {
+		u32 sof, stc;
+
+		sof = usb_gadget_frame_number(cdev->gadget);
+		ktime_get_ts64(&ts);
+		stc = ((u64)ts.tv_sec * USEC_PER_SEC + ts.tv_nsec / NSEC_PER_USEC) * 48;
+
+		data[1] |= UVC_STREAM_SCR;
+		put_unaligned_le32(stc, &data[pos]);
+		put_unaligned_le16(sof, &data[pos+4]);
+		pos += 6;
+	}
+
+	data[0] = pos;
+
+	if (buf->bytesused - video->queue.buf_used <= len - pos)
 		data[1] |= UVC_STREAM_EOF;
 
-	return 2;
+	return pos;
 }
 
 static int
@@ -104,22 +133,22 @@ uvc_video_encode_isoc_sg(struct usb_request *req, struct uvc_video *video,
 	unsigned int len = video->req_size;
 	unsigned int sg_left, part = 0;
 	unsigned int i;
-	int ret;
+	int header_len;
 
 	sg = ureq->sgt.sgl;
 	sg_init_table(sg, ureq->sgt.nents);
 
 	/* Init the header. */
-	ret = uvc_video_encode_header(video, buf, ureq->header,
+	header_len = uvc_video_encode_header(video, buf, ureq->header,
 				      video->req_size);
-	sg_set_buf(sg, ureq->header, UVCG_REQUEST_HEADER_LEN);
-	len -= ret;
+	sg_set_buf(sg, ureq->header, header_len);
+	len -= header_len;
 
 	if (pending <= len)
 		len = pending;
 
 	req->length = (len == pending) ?
-		len + UVCG_REQUEST_HEADER_LEN : video->req_size;
+		len + header_len : video->req_size;
 
 	/* Init the pending sgs with payload */
 	sg = sg_next(sg);
@@ -148,7 +177,7 @@ uvc_video_encode_isoc_sg(struct usb_request *req, struct uvc_video *video,
 	req->num_sgs = i + 1;
 
 	req->length -= len;
-	video->queue.buf_used += req->length - UVCG_REQUEST_HEADER_LEN;
+	video->queue.buf_used += req->length - header_len;
 
 	if (buf->bytesused == video->queue.buf_used || !buf->sg) {
 		video->queue.buf_used = 0;
@@ -199,9 +228,12 @@ static int uvcg_video_ep_queue(struct uvc_video *video, struct usb_request *req)
 		uvcg_err(&video->uvc->func, "Failed to queue request (%d).\n",
 			 ret);
 
-		/* Isochronous endpoints can't be halted. */
-		if (usb_endpoint_xfer_bulk(video->ep->desc))
-			usb_ep_set_halt(video->ep);
+		/* If the endpoint is disabled the descriptor may be NULL. */
+		if (video->ep->desc) {
+			/* Isochronous endpoints can't be halted. */
+			if (usb_endpoint_xfer_bulk(video->ep->desc))
+				usb_ep_set_halt(video->ep);
+		}
 	}
 
 	return ret;
@@ -213,6 +245,7 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
 	struct uvc_request *ureq = req->context;
 	struct uvc_video *video = ureq->video;
 	struct uvc_video_queue *queue = &video->queue;
+	struct uvc_device *uvc = video->uvc;
 	unsigned long flags;
 
 	switch (req->status) {
@@ -235,7 +268,8 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
 	list_add_tail(&req->list, &video->req_free);
 	spin_unlock_irqrestore(&video->req_lock, flags);
 
-	schedule_work(&video->pump);
+	if (uvc->state == UVC_STATE_STREAMING)
+		schedule_work(&video->pump);
 }
 
 static int
@@ -302,8 +336,8 @@ uvc_video_alloc_requests(struct uvc_video *video)
 		list_add_tail(&video->ureq[i].req->list, &video->req_free);
 		/* req_size/PAGE_SIZE + 1 for overruns and + 1 for header */
 		sg_alloc_table(&video->ureq[i].sgt,
-			       DIV_ROUND_UP(req_size - 2, PAGE_SIZE) + 2,
-			       GFP_KERNEL);
+			       DIV_ROUND_UP(req_size - UVCG_REQUEST_HEADER_LEN,
+					    PAGE_SIZE) + 2, GFP_KERNEL);
 	}
 
 	video->req_size = req_size;
@@ -329,12 +363,12 @@ static void uvcg_video_pump(struct work_struct *work)
 {
 	struct uvc_video *video = container_of(work, struct uvc_video, pump);
 	struct uvc_video_queue *queue = &video->queue;
-	struct usb_request *req;
+	struct usb_request *req = NULL;
 	struct uvc_buffer *buf;
 	unsigned long flags;
 	int ret;
 
-	while (1) {
+	while (video->ep->enabled) {
 		/* Retrieve the first available USB request, protected by the
 		 * request lock.
 		 */
@@ -384,6 +418,9 @@ static void uvcg_video_pump(struct work_struct *work)
 		video->req_int_count++;
 	}
 
+	if (!req)
+		return;
+
 	spin_lock_irqsave(&video->req_lock, flags);
 	list_add_tail(&req->list, &video->req_free);
 	spin_unlock_irqrestore(&video->req_lock, flags);
diff --git a/drivers/usb/gadget/function/uvc_video.h b/drivers/usb/gadget/function/uvc_video.h
index 9bf19475f6f9..03adeefa343b 100644
--- a/drivers/usb/gadget/function/uvc_video.h
+++ b/drivers/usb/gadget/function/uvc_video.h
@@ -12,8 +12,6 @@
 #ifndef __UVC_VIDEO_H__
 #define __UVC_VIDEO_H__
 
-#define UVCG_REQUEST_HEADER_LEN			2
-
 struct uvc_video;
 
 int uvcg_video_enable(struct uvc_video *video, int enable);
diff --git a/drivers/usb/gadget/legacy/hid.c b/drivers/usb/gadget/legacy/hid.c
index 5b27d289443f..3912cc805f3a 100644
--- a/drivers/usb/gadget/legacy/hid.c
+++ b/drivers/usb/gadget/legacy/hid.c
@@ -99,8 +99,10 @@ static int do_config(struct usb_configuration *c)
 
 	list_for_each_entry(e, &hidg_func_list, node) {
 		e->f = usb_get_function(e->fi);
-		if (IS_ERR(e->f))
+		if (IS_ERR(e->f)) {
+			status = PTR_ERR(e->f);
 			goto put;
+		}
 		status = usb_add_function(c, e->f);
 		if (status < 0) {
 			usb_put_function(e->f);
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 8c614bb86c66..69394dc1cdfb 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -330,6 +330,7 @@ config USB_AMD5536UDC
 config USB_FSL_QE
 	tristate "Freescale QE/CPM USB Device Controller"
 	depends on FSL_SOC && (QUICC_ENGINE || CPM)
+	depends on !64BIT || BROKEN
 	help
 	   Some of Freescale PowerPC processors have a Full Speed
 	   QE/CPM2 USB controller, which support device mode with 4
diff --git a/drivers/usb/gadget/udc/amd5536udc.h b/drivers/usb/gadget/udc/amd5536udc.h
index 3296f3fcee48..055436016503 100644
--- a/drivers/usb/gadget/udc/amd5536udc.h
+++ b/drivers/usb/gadget/udc/amd5536udc.h
@@ -572,7 +572,6 @@ struct udc {
 	struct extcon_specific_cable_nb	extcon_nb;
 	struct notifier_block		nb;
 	struct delayed_work		drd_work;
-	struct workqueue_struct		*drd_wq;
 	u32				conn_type;
 };
 
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 14fdf918ecfe..568534a0d17c 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -6,6 +6,8 @@
  * Author: Felipe Balbi <balbi@ti.com>
  */
 
+#define pr_fmt(fmt)	"UDC core: " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/device.h>
@@ -89,7 +91,7 @@ EXPORT_SYMBOL_GPL(usb_ep_set_maxpacket_limit);
  * configurable, with more generic names like "ep-a".  (remember that for
  * USB, "in" means "towards the USB host".)
  *
- * This routine must be called in process context.
+ * This routine may be called in an atomic (interrupt) context.
  *
  * returns zero, or a negative error code.
  */
@@ -134,7 +136,7 @@ EXPORT_SYMBOL_GPL(usb_ep_enable);
  * gadget drivers must call usb_ep_enable() again before queueing
  * requests to the endpoint.
  *
- * This routine must be called in process context.
+ * This routine may be called in an atomic (interrupt) context.
  *
  * returns zero, or a negative error code.
  */
@@ -1555,14 +1557,14 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
 
 	if (!driver->match_existing_only) {
 		list_add_tail(&driver->pending, &gadget_driver_pending_list);
-		pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n",
+		pr_info("couldn't find an available UDC - added [%s] to list of pending drivers\n",
 			driver->function);
 		ret = 0;
 	}
 
 	mutex_unlock(&udc_lock);
 	if (ret)
-		pr_warn("udc-core: couldn't find an available UDC or it's busy\n");
+		pr_warn("couldn't find an available UDC or it's busy: %d\n", ret);
 	return ret;
 found:
 	ret = udc_bind_to_driver(udc, driver);
diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
index 3e1267d38774..3757a772a55e 100644
--- a/drivers/usb/gadget/udc/goku_udc.c
+++ b/drivers/usb/gadget/udc/goku_udc.c
@@ -553,12 +553,12 @@ static int start_dma(struct goku_ep *ep, struct goku_request *req)
 
 		master &= ~MST_R_BITS;
 		if (unlikely(req->req.length == 0))
-			master = MST_RD_ENA | MST_RD_EOPB;
+			master |= MST_RD_ENA | MST_RD_EOPB;
 		else if ((req->req.length % ep->ep.maxpacket) != 0
 					|| req->req.zero)
-			master = MST_RD_ENA | MST_EOPB_ENA;
+			master |= MST_RD_ENA | MST_EOPB_ENA;
 		else
-			master = MST_RD_ENA | MST_EOPB_DIS;
+			master |= MST_RD_ENA | MST_EOPB_DIS;
 
 		ep->dev->int_enable |= INT_MSTRDEND;
 
diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c
index a09ec1d826b2..52cdfd8212d6 100644
--- a/drivers/usb/gadget/udc/pxa25x_udc.c
+++ b/drivers/usb/gadget/udc/pxa25x_udc.c
@@ -2325,7 +2325,7 @@ static int pxa25x_udc_probe(struct platform_device *pdev)
 	pr_info("%s: version %s\n", driver_name, DRIVER_VERSION);
 
 	/* insist on Intel/ARM/XScale */
-	asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev));
+	asm("mrc p15, 0, %0, c0, c0" : "=r" (chiprev));
 	if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) {
 		pr_err("%s: not XScale!\n", driver_name);
 		return -ENODEV;
diff --git a/drivers/usb/gadget/udc/snps_udc_plat.c b/drivers/usb/gadget/udc/snps_udc_plat.c
index 99805d60a7ab..8bbb89c80348 100644
--- a/drivers/usb/gadget/udc/snps_udc_plat.c
+++ b/drivers/usb/gadget/udc/snps_udc_plat.c
@@ -243,11 +243,6 @@ static int udc_plat_remove(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, NULL);
 
-	if (dev->drd_wq) {
-		flush_workqueue(dev->drd_wq);
-		destroy_workqueue(dev->drd_wq);
-	}
-
 	phy_power_off(dev->udc_phy);
 	phy_exit(dev->udc_phy);
 	extcon_unregister_notifier(dev->edev, EXTCON_USB, &dev->nb);
diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c
index fb4ffedd6f0d..f5ca670776a3 100644
--- a/drivers/usb/gadget/udc/udc-xilinx.c
+++ b/drivers/usb/gadget/udc/udc-xilinx.c
@@ -11,6 +11,7 @@
  * USB peripheral controller (at91_udc.c).
  */
 
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
@@ -171,6 +172,7 @@ struct xusb_ep {
  * @addr: the usb device base address
  * @lock: instance of spinlock
  * @dma_enabled: flag indicating whether the dma is included in the system
+ * @clk: pointer to struct clk
  * @read_fn: function pointer to read device registers
  * @write_fn: function pointer to write to device registers
  */
@@ -188,6 +190,7 @@ struct xusb_udc {
 	void __iomem *addr;
 	spinlock_t lock;
 	bool dma_enabled;
+	struct clk *clk;
 
 	unsigned int (*read_fn)(void __iomem *);
 	void (*write_fn)(void __iomem *, u32, u32);
@@ -2092,6 +2095,27 @@ static int xudc_probe(struct platform_device *pdev)
 	udc->gadget.ep0 = &udc->ep[XUSB_EP_NUMBER_ZERO].ep_usb;
 	udc->gadget.name = driver_name;
 
+	udc->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
+	if (IS_ERR(udc->clk)) {
+		if (PTR_ERR(udc->clk) != -ENOENT) {
+			ret = PTR_ERR(udc->clk);
+			goto fail;
+		}
+
+		/*
+		 * Clock framework support is optional, continue on,
+		 * anyways if we don't find a matching clock
+		 */
+		dev_warn(&pdev->dev, "s_axi_aclk clock property is not found\n");
+		udc->clk = NULL;
+	}
+
+	ret = clk_prepare_enable(udc->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable clock.\n");
+		return ret;
+	}
+
 	spin_lock_init(&udc->lock);
 
 	/* Check for IP endianness */
@@ -2147,6 +2171,7 @@ static int xudc_remove(struct platform_device *pdev)
 	struct xusb_udc *udc = platform_get_drvdata(pdev);
 
 	usb_del_gadget_udc(&udc->gadget);
+	clk_disable_unprepare(udc->clk);
 
 	return 0;
 }
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index c4736d1d020c..d1d926f8f9c2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -290,7 +290,8 @@ config USB_EHCI_EXYNOS
 	tristate "EHCI support for Samsung S5P/Exynos SoC Series"
 	depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
 	help
-	  Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
+	  Enable support for the Samsung S5Pv210 and Exynos SOC's on-chip EHCI
+	  controller.
 
 config USB_EHCI_MV
 	tristate "EHCI support for Marvell PXA/MMP USB controller"
@@ -563,7 +564,8 @@ config USB_OHCI_EXYNOS
 	tristate "OHCI support for Samsung S5P/Exynos SoC Series"
 	depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
 	help
-	  Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
+	  Enable support for the Samsung S5Pv210 and Exynos SOC's on-chip OHCI
+	  controller.
 
 config USB_CNS3XXX_OHCI
 	bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index e893467d659c..05d41fd65f25 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -18,6 +18,8 @@
 #include <linux/platform_device.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/of.h>
 
 #include "ehci.h"
 
@@ -25,6 +27,9 @@
 
 static const char hcd_name[] = "ehci-atmel";
 
+#define EHCI_INSNREG(index)			((index) * 4 + 0x90)
+#define EHCI_INSNREG08_HSIC_EN			BIT(2)
+
 /* interface and function clocks */
 #define hcd_to_atmel_ehci_priv(h) \
 	((struct atmel_ehci_priv *)hcd_to_ehci(h)->priv)
@@ -154,6 +159,9 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev)
 		goto fail_add_hcd;
 	device_wakeup_enable(hcd->self.controller);
 
+	if (of_usb_get_phy_mode(pdev->dev.of_node) == USBPHY_INTERFACE_MODE_HSIC)
+		writel(EHCI_INSNREG08_HSIC_EN, hcd->regs + EHCI_INSNREG(8));
+
 	return retval;
 
 fail_add_hcd:
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 1776c05d0a48..3d82e0b853be 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -588,7 +588,7 @@ static int ehci_run (struct usb_hcd *hcd)
 	 * hcc_params controls whether ehci->regs->segment must (!!!)
 	 * be used; it constrains QH/ITD/SITD and QTD locations.
 	 * dma_pool consistent memory always uses segment zero.
-	 * streaming mappings for I/O buffers, like pci_map_single(),
+	 * streaming mappings for I/O buffers, like dma_map_single(),
 	 * can return segments above 4GB, if the device allows.
 	 *
 	 * NOTE:  the dma mask is visible through dev->dma_mask, so
@@ -635,7 +635,16 @@ static int ehci_run (struct usb_hcd *hcd)
 	/* Wait until HC become operational */
 	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
 	msleep(5);
-	rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT, 0, 100 * 1000);
+
+	/* For Aspeed, STS_HALT also depends on ASS/PSS status.
+	 * Check CMD_RUN instead.
+	 */
+	if (ehci->is_aspeed)
+		rc = ehci_handshake(ehci, &ehci->regs->command, CMD_RUN,
+				    1, 100 * 1000);
+	else
+		rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT,
+				    0, 100 * 1000);
 
 	up_write(&ehci_cf_port_reset_rwsem);
 
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index c4f6a2559a98..efe30e3be22f 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -745,12 +745,13 @@ int ehci_hub_control(
 	unsigned	selector;
 
 	/*
-	 * Avoid underflow while calculating (wIndex & 0xff) - 1.
-	 * The compiler might deduce that wIndex can never be 0 and then
-	 * optimize away the tests for !wIndex below.
+	 * Avoid out-of-bounds values while calculating the port index
+	 * from wIndex.  The compiler doesn't like pointers to invalid
+	 * addresses, even if they are never used.
 	 */
-	temp = wIndex & 0xff;
-	temp -= (temp > 0);
+	temp = (wIndex - 1) & 0xff;
+	if (temp >= HCS_N_PORTS_MAX)
+		temp = 0;
 	status_reg = &ehci->regs->port_status[temp];
 	hostpc_reg = &ehci->regs->hostpc[temp];
 
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index 21307d862af6..4c6c08b675b5 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -73,10 +73,9 @@ static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, gfp_t flags)
 	if (!qh)
 		goto done;
 	qh->hw = (struct ehci_qh_hw *)
-		dma_pool_alloc(ehci->qh_pool, flags, &dma);
+		dma_pool_zalloc(ehci->qh_pool, flags, &dma);
 	if (!qh->hw)
 		goto fail;
-	memset(qh->hw, 0, sizeof *qh->hw);
 	qh->qh_dma = dma;
 	// INIT_LIST_HEAD (&qh->qh_list);
 	INIT_LIST_HEAD (&qh->qtd_list);
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 8fd27249ad25..fa46d217dd10 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -258,8 +258,6 @@ static int mv_ehci_remove(struct platform_device *pdev)
 	return 0;
 }
 
-MODULE_ALIAS("mv-ehci");
-
 static const struct platform_device_id ehci_id_table[] = {
 	{"pxa-u2oehci", 0},
 	{"pxa-sph", 0},
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index c70f2d0b4aaf..c3dc906274d9 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -297,6 +297,12 @@ static int ehci_platform_probe(struct platform_device *dev)
 					  "has-transaction-translator"))
 			hcd->has_tt = 1;
 
+		if (of_device_is_compatible(dev->dev.of_node,
+					    "aspeed,ast2500-ehci") ||
+		    of_device_is_compatible(dev->dev.of_node,
+					    "aspeed,ast2600-ehci"))
+			ehci->is_aspeed = 1;
+
 		if (soc_device_match(quirk_poll_match))
 			priv->quirk_poll = true;
 
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 80bb823aa9fe..fdd073cc053b 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -219,6 +219,7 @@ struct ehci_hcd {			/* one per controller */
 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
 	unsigned		spurious_oc:1;
+	unsigned		is_aspeed:1;
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 4b02ace09f3d..b590995a6b3e 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -1859,10 +1859,9 @@ static struct fotg210_qh *fotg210_qh_alloc(struct fotg210_hcd *fotg210,
 	if (!qh)
 		goto done;
 	qh->hw = (struct fotg210_qh_hw *)
-		dma_pool_alloc(fotg210->qh_pool, flags, &dma);
+		dma_pool_zalloc(fotg210->qh_pool, flags, &dma);
 	if (!qh->hw)
 		goto fail;
-	memset(qh->hw, 0, sizeof(*qh->hw));
 	qh->qh_dma = dma;
 	INIT_LIST_HEAD(&qh->qtd_list);
 
@@ -5023,7 +5022,7 @@ static int fotg210_run(struct usb_hcd *hcd)
 	 * hcc_params controls whether fotg210->regs->segment must (!!!)
 	 * be used; it constrains QH/ITD/SITD and QTD locations.
 	 * dma_pool consistent memory always uses segment zero.
-	 * streaming mappings for I/O buffers, like pci_map_single(),
+	 * streaming mappings for I/O buffers, like dma_map_single(),
 	 * can return segments above 4GB, if the device allows.
 	 *
 	 * NOTE:  the dma mask is visible through dev->dma_mask, so
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 59cc1bc7f12f..30de85a707fe 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -125,8 +125,6 @@ struct max3421_hcd {
 
 	struct task_struct *spi_thread;
 
-	struct max3421_hcd *next;
-
 	enum max3421_rh_state rh_state;
 	/* lower 16 bits contain port status, upper 16 bits the change mask: */
 	u32 port_status;
@@ -174,8 +172,6 @@ struct max3421_ep {
 	u8 retransmit;			/* packet needs retransmission */
 };
 
-static struct max3421_hcd *max3421_hcd_list;
-
 #define MAX3421_FIFO_SIZE	64
 
 #define MAX3421_SPI_DIR_RD	0	/* read register from MAX3421 */
@@ -1882,9 +1878,8 @@ max3421_probe(struct spi_device *spi)
 	}
 	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 	max3421_hcd = hcd_to_max3421(hcd);
-	max3421_hcd->next = max3421_hcd_list;
-	max3421_hcd_list = max3421_hcd;
 	INIT_LIST_HEAD(&max3421_hcd->ep_list);
+	spi_set_drvdata(spi, max3421_hcd);
 
 	max3421_hcd->tx = kmalloc(sizeof(*max3421_hcd->tx), GFP_KERNEL);
 	if (!max3421_hcd->tx)
@@ -1934,28 +1929,18 @@ error:
 static int
 max3421_remove(struct spi_device *spi)
 {
-	struct max3421_hcd *max3421_hcd = NULL, **prev;
-	struct usb_hcd *hcd = NULL;
+	struct max3421_hcd *max3421_hcd;
+	struct usb_hcd *hcd;
 	unsigned long flags;
 
-	for (prev = &max3421_hcd_list; *prev; prev = &(*prev)->next) {
-		max3421_hcd = *prev;
-		hcd = max3421_to_hcd(max3421_hcd);
-		if (hcd->self.controller == &spi->dev)
-			break;
-	}
-	if (!max3421_hcd) {
-		dev_err(&spi->dev, "no MAX3421 HCD found for SPI device %p\n",
-			spi);
-		return -ENODEV;
-	}
+	max3421_hcd = spi_get_drvdata(spi);
+	hcd = max3421_to_hcd(max3421_hcd);
 
 	usb_remove_hcd(hcd);
 
 	spin_lock_irqsave(&max3421_hcd->lock, flags);
 
 	kthread_stop(max3421_hcd->spi_thread);
-	*prev = max3421_hcd->next;
 
 	spin_unlock_irqrestore(&max3421_hcd->lock, flags);
 
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 1f5e69314a17..666b1c665188 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -191,8 +191,7 @@ static int ohci_urb_enqueue (
 	}
 
 	/* allocate the private part of the URB */
-	urb_priv = kzalloc (sizeof (urb_priv_t) + size * sizeof (struct td *),
-			mem_flags);
+	urb_priv = kzalloc(struct_size(urb_priv, td, size), mem_flags);
 	if (!urb_priv)
 		return -ENOMEM;
 	INIT_LIST_HEAD (&urb_priv->pending);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index f474f2f9c1e4..90cee192e96d 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -91,6 +91,9 @@ __acquires(ohci->lock)
 	update_done_list(ohci);
 	ohci_work(ohci);
 
+	/* All ED unlinks should be finished, no need for SOF interrupts */
+	ohci_writel(ohci, OHCI_INTR_SF, &ohci->regs->intrdisable);
+
 	/*
 	 * Some controllers don't handle "global" suspend properly if
 	 * there are unsuspended ports.  For these controllers, put all
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index 08ec2ab0d95a..3f3d62dc0674 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -199,7 +199,7 @@ static int ohci_hcd_tmio_drv_probe(struct platform_device *dev)
 	if (usb_disabled())
 		return -ENODEV;
 
-	if (!cell)
+	if (!cell || !regs || !config || !sram)
 		return -EINVAL;
 
 	if (irq < 0)
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 4300326b3730..e82ff2a49672 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3131,7 +3131,7 @@ static int oxu_run(struct usb_hcd *hcd)
 	/* hcc_params controls whether oxu->regs->segment must (!!!)
 	 * be used; it constrains QH/ITD/SITD and QTD locations.
 	 * dma_pool consistent memory always uses segment zero.
-	 * streaming mappings for I/O buffers, like pci_map_single(),
+	 * streaming mappings for I/O buffers, like dma_map_single(),
 	 * can return segments above 4GB, if the device allows.
 	 *
 	 * NOTE:  the dma mask is visible through dev->dma_mask, so
diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index 134f4789bd89..1edef7527c11 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -734,7 +734,7 @@ static void drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
 	if (!need_bw_sch(udev, ep))
 		return;
 
-	xhci_err(xhci, "%s %s\n", __func__, decode_ep(ep, udev->speed));
+	xhci_dbg(xhci, "%s %s\n", __func__, decode_ep(ep, udev->speed));
 
 	hash_for_each_possible_safe(mtk->sch_ep_hash, sch_ep,
 				    hn, hentry, (unsigned long)ep) {
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 2484a9d38ce2..1d8a4c089a85 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -65,6 +65,13 @@
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3			0x43ba
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_2			0x43bb
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_1			0x43bc
+#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_1		0x161a
+#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_2		0x161b
+#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3		0x161d
+#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4		0x161e
+#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5		0x15d6
+#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6		0x15d7
+
 #define PCI_DEVICE_ID_ASMEDIA_1042_XHCI			0x1042
 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI		0x1142
 #define PCI_DEVICE_ID_ASMEDIA_1142_XHCI			0x1242
@@ -317,6 +324,15 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	     pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4))
 		xhci->quirks |= XHCI_NO_SOFT_RETRY;
 
+	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+	    (pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_1 ||
+	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_2 ||
+	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3 ||
+	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4 ||
+	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5 ||
+	    pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6))
+		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
+
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
 		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 				"QUIRK: Resetting on resume");
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index efbd317f2f25..988a8c02e7e2 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -99,10 +99,6 @@ struct iowarrior {
 /*    globals   */
 /*--------------*/
 
-/*
- *  USB spec identifies 5 second timeouts.
- */
-#define GET_TIMEOUT 5
 #define USB_REQ_GET_REPORT  0x01
 //#if 0
 static int usb_get_report(struct usb_device *dev,
@@ -114,7 +110,7 @@ static int usb_get_report(struct usb_device *dev,
 			       USB_DIR_IN | USB_TYPE_CLASS |
 			       USB_RECIP_INTERFACE, (type << 8) + id,
 			       inter->desc.bInterfaceNumber, buf, size,
-			       GET_TIMEOUT*HZ);
+			       USB_CTRL_GET_TIMEOUT);
 }
 //#endif
 
@@ -129,7 +125,7 @@ static int usb_set_report(struct usb_interface *intf, unsigned char type,
 			       USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 			       (type << 8) + id,
 			       intf->cur_altsetting->desc.bInterfaceNumber, buf,
-			       size, HZ);
+			       size, 1000);
 }
 
 /*---------------------*/
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 8de143807c1a..4d61df6a9b5c 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -120,7 +120,7 @@ config USB_MUSB_MEDIATEK
 	tristate "MediaTek platforms"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 	depends on NOP_USB_XCEIV
-	depends on GENERIC_PHY
+	select GENERIC_PHY
 	select USB_ROLE_SWITCH
 
 comment "MUSB DMA mode"
diff --git a/drivers/usb/musb/mediatek.c b/drivers/usb/musb/mediatek.c
index 6b92d037d8fc..f5d97eb84cb5 100644
--- a/drivers/usb/musb/mediatek.c
+++ b/drivers/usb/musb/mediatek.c
@@ -185,6 +185,7 @@ static int mtk_otg_switch_init(struct mtk_glue *glue)
 
 	role_sx_desc.set = musb_usb_role_sx_set;
 	role_sx_desc.get = musb_usb_role_sx_get;
+	role_sx_desc.allow_userspace_control = true;
 	role_sx_desc.fwnode = dev_fwnode(glue->dev);
 	role_sx_desc.driver_data = glue;
 	glue->role_sw = usb_role_switch_register(glue->dev, &role_sx_desc);
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 98c0f4c1bffd..51274b87f46c 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1247,9 +1247,11 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 		status = musb_queue_resume_work(musb,
 						musb_ep_restart_resume_work,
 						request);
-		if (status < 0)
+		if (status < 0) {
 			dev_err(musb->controller, "%s resume work: %i\n",
 				__func__, status);
+			list_del(&request->list);
+		}
 	}
 
 unlock:
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index f3f76f2ac63f..961c858fb349 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -440,6 +440,10 @@ static u8 sunxi_musb_readb(void __iomem *addr, u32 offset)
 				return 0xde;
 
 			return readb(addr + SUNXI_MUSB_CONFIGDATA);
+		case MUSB_ULPI_BUSCONTROL:
+			dev_warn(sunxi_musb->controller->parent,
+				"sunxi-musb does not have ULPI bus control register\n");
+			return 0;
 		/* Offset for these is fixed by sunxi_musb_busctl_offset() */
 		case SUNXI_MUSB_TXFUNCADDR:
 		case SUNXI_MUSB_TXHUBADDR:
@@ -494,6 +498,10 @@ static void sunxi_musb_writeb(void __iomem *addr, unsigned offset, u8 data)
 			return writeb(data, addr + SUNXI_MUSB_TXFIFOSZ);
 		case MUSB_RXFIFOSZ:
 			return writeb(data, addr + SUNXI_MUSB_RXFIFOSZ);
+		case MUSB_ULPI_BUSCONTROL:
+			dev_warn(sunxi_musb->controller->parent,
+				"sunxi-musb does not have ULPI bus control register\n");
+			return;
 		/* Offset for these is fixed by sunxi_musb_busctl_offset() */
 		case SUNXI_MUSB_TXFUNCADDR:
 		case SUNXI_MUSB_TXHUBADDR:
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index c968ecda42aa..7ed4cc348d99 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1104,6 +1104,11 @@ static int tusb_musb_init(struct musb *musb)
 
 	/* dma address for async dma */
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		pr_debug("no async dma resource?\n");
+		ret = -ENODEV;
+		goto done;
+	}
 	musb->async = mem->start;
 
 	/* dma address for sync dma */
diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c
index a3e043e3e4aa..f2d2cc586c5b 100644
--- a/drivers/usb/phy/phy-tahvo.c
+++ b/drivers/usb/phy/phy-tahvo.c
@@ -194,8 +194,6 @@ static int tahvo_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
 	struct tahvo_usb *tu = container_of(otg->usb_phy, struct tahvo_usb,
 					    phy);
 
-	dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, host);
-
 	mutex_lock(&tu->serialize);
 
 	if (host == NULL) {
@@ -224,8 +222,6 @@ static int tahvo_usb_set_peripheral(struct usb_otg *otg,
 	struct tahvo_usb *tu = container_of(otg->usb_phy, struct tahvo_usb,
 					    phy);
 
-	dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, gadget);
-
 	mutex_lock(&tu->serialize);
 
 	if (!gadget) {
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index c0f432d509aa..68cd4b68e3a2 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -63,6 +63,10 @@
 #define   A_VBUS_VLD_WAKEUP_EN			BIT(30)
 
 #define USB_PHY_VBUS_WAKEUP_ID			0x408
+#define   ID_INT_EN				BIT(0)
+#define   ID_CHG_DET				BIT(1)
+#define   VBUS_WAKEUP_INT_EN			BIT(8)
+#define   VBUS_WAKEUP_CHG_DET			BIT(9)
 #define   VBUS_WAKEUP_STS			BIT(10)
 #define   VBUS_WAKEUP_WAKEUP_EN			BIT(30)
 
@@ -158,6 +162,10 @@
 #define   USB_USBMODE_HOST			(3 << 0)
 #define   USB_USBMODE_DEVICE			(2 << 0)
 
+#define PMC_USB_AO				0xf0
+#define   VBUS_WAKEUP_PD_P0			BIT(2)
+#define   ID_PD_P0				BIT(3)
+
 static DEFINE_SPINLOCK(utmip_pad_lock);
 static unsigned int utmip_pad_count;
 
@@ -533,13 +541,14 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
 	val &= ~USB_WAKE_ON_RESUME_EN;
 	writel_relaxed(val, base + USB_SUSP_CTRL);
 
-	if (phy->mode == USB_DR_MODE_PERIPHERAL) {
+	if (phy->mode != USB_DR_MODE_HOST) {
 		val = readl_relaxed(base + USB_SUSP_CTRL);
 		val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
 		writel_relaxed(val, base + USB_SUSP_CTRL);
 
 		val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
 		val &= ~VBUS_WAKEUP_WAKEUP_EN;
+		val &= ~(ID_CHG_DET | VBUS_WAKEUP_CHG_DET);
 		writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
 
 		val = readl_relaxed(base + USB_PHY_VBUS_SENSORS);
@@ -687,9 +696,10 @@ static int utmi_phy_power_off(struct tegra_usb_phy *phy)
 		 * Ask VBUS sensor to generate wake event once cable is
 		 * connected.
 		 */
-		if (phy->mode == USB_DR_MODE_PERIPHERAL) {
+		if (phy->mode != USB_DR_MODE_HOST) {
 			val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
 			val |= VBUS_WAKEUP_WAKEUP_EN;
+			val &= ~(ID_CHG_DET | VBUS_WAKEUP_CHG_DET);
 			writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
 
 			val = readl_relaxed(base + USB_PHY_VBUS_SENSORS);
@@ -893,6 +903,7 @@ static void tegra_usb_phy_shutdown(struct usb_phy *u_phy)
 	if (WARN_ON(!phy->freq))
 		return;
 
+	usb_phy_set_wakeup(u_phy, false);
 	tegra_usb_phy_power_off(phy);
 
 	if (!phy->is_ulpi_phy)
@@ -904,26 +915,146 @@ static void tegra_usb_phy_shutdown(struct usb_phy *u_phy)
 	phy->freq = NULL;
 }
 
+static irqreturn_t tegra_usb_phy_isr(int irq, void *data)
+{
+	u32 val, int_mask = ID_CHG_DET | VBUS_WAKEUP_CHG_DET;
+	struct tegra_usb_phy *phy = data;
+	void __iomem *base = phy->regs;
+
+	/*
+	 * The PHY interrupt also wakes the USB controller driver since
+	 * interrupt is shared. We don't do anything in the PHY driver,
+	 * so just clear the interrupt.
+	 */
+	val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+	writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+	return val & int_mask ? IRQ_HANDLED : IRQ_NONE;
+}
+
 static int tegra_usb_phy_set_wakeup(struct usb_phy *u_phy, bool enable)
 {
 	struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+	void __iomem *base = phy->regs;
+	int ret = 0;
+	u32 val;
+
+	if (phy->wakeup_enabled && phy->mode != USB_DR_MODE_HOST &&
+	    phy->irq > 0) {
+		disable_irq(phy->irq);
+
+		val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+		val &= ~(ID_INT_EN | VBUS_WAKEUP_INT_EN);
+		writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+		enable_irq(phy->irq);
+
+		free_irq(phy->irq, phy);
+
+		phy->wakeup_enabled = false;
+	}
+
+	if (enable && phy->mode != USB_DR_MODE_HOST && phy->irq > 0) {
+		ret = request_irq(phy->irq, tegra_usb_phy_isr, IRQF_SHARED,
+				  dev_name(phy->u_phy.dev), phy);
+		if (!ret) {
+			disable_irq(phy->irq);
+
+			/*
+			 * USB clock will be resumed once wake event will be
+			 * generated.  The ID-change event requires to have
+			 * interrupts enabled, otherwise it won't be generated.
+			 */
+			val = readl_relaxed(base + USB_PHY_VBUS_WAKEUP_ID);
+			val |= ID_INT_EN | VBUS_WAKEUP_INT_EN;
+			writel_relaxed(val, base + USB_PHY_VBUS_WAKEUP_ID);
+
+			enable_irq(phy->irq);
+		} else {
+			dev_err(phy->u_phy.dev,
+				"Failed to request interrupt: %d", ret);
+			enable = false;
+		}
+	}
 
 	phy->wakeup_enabled = enable;
 
-	return 0;
+	return ret;
 }
 
 static int tegra_usb_phy_set_suspend(struct usb_phy *u_phy, int suspend)
 {
 	struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy);
+	int ret;
 
 	if (WARN_ON(!phy->freq))
 		return -EINVAL;
 
+	/*
+	 * PHY is sharing IRQ with the CI driver, hence here we either
+	 * disable interrupt for both PHY and CI or for CI only.  The
+	 * interrupt needs to be disabled while hardware is reprogrammed
+	 * because interrupt touches the programmed registers, and thus,
+	 * there could be a race condition.
+	 */
+	if (phy->irq > 0)
+		disable_irq(phy->irq);
+
 	if (suspend)
-		return tegra_usb_phy_power_off(phy);
+		ret = tegra_usb_phy_power_off(phy);
 	else
-		return tegra_usb_phy_power_on(phy);
+		ret = tegra_usb_phy_power_on(phy);
+
+	if (phy->irq > 0)
+		enable_irq(phy->irq);
+
+	return ret;
+}
+
+static int tegra_usb_phy_configure_pmc(struct tegra_usb_phy *phy)
+{
+	int err, val = 0;
+
+	/* older device-trees don't have PMC regmap */
+	if (!phy->pmc_regmap)
+		return 0;
+
+	/*
+	 * Tegra20 has a different layout of PMC USB register bits and AO is
+	 * enabled by default after system reset on Tegra20, so assume nothing
+	 * to do on Tegra20.
+	 */
+	if (!phy->soc_config->requires_pmc_ao_power_up)
+		return 0;
+
+	/* enable VBUS wake-up detector */
+	if (phy->mode != USB_DR_MODE_HOST)
+		val |= VBUS_WAKEUP_PD_P0 << phy->instance * 4;
+
+	/* enable ID-pin ACC detector for OTG mode switching */
+	if (phy->mode == USB_DR_MODE_OTG)
+		val |= ID_PD_P0 << phy->instance * 4;
+
+	/* disable detectors to reset them */
+	err = regmap_set_bits(phy->pmc_regmap, PMC_USB_AO, val);
+	if (err) {
+		dev_err(phy->u_phy.dev, "Failed to disable PMC AO: %d\n", err);
+		return err;
+	}
+
+	usleep_range(10, 100);
+
+	/* enable detectors */
+	err = regmap_clear_bits(phy->pmc_regmap, PMC_USB_AO, val);
+	if (err) {
+		dev_err(phy->u_phy.dev, "Failed to enable PMC AO: %d\n", err);
+		return err;
+	}
+
+	/* detectors starts to work after 10ms */
+	usleep_range(10000, 15000);
+
+	return 0;
 }
 
 static int tegra_usb_phy_init(struct usb_phy *u_phy)
@@ -967,6 +1098,10 @@ static int tegra_usb_phy_init(struct usb_phy *u_phy)
 			goto disable_vbus;
 	}
 
+	err = tegra_usb_phy_configure_pmc(phy);
+	if (err)
+		goto close_phy;
+
 	err = tegra_usb_phy_power_on(phy);
 	if (err)
 		goto close_phy;
@@ -1135,11 +1270,56 @@ static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy,
 	return 0;
 }
 
+static void tegra_usb_phy_put_pmc_device(void *dev)
+{
+	put_device(dev);
+}
+
+static int tegra_usb_phy_parse_pmc(struct device *dev,
+				   struct tegra_usb_phy *phy)
+{
+	struct platform_device *pmc_pdev;
+	struct of_phandle_args args;
+	int err;
+
+	err = of_parse_phandle_with_fixed_args(dev->of_node, "nvidia,pmc",
+					       1, 0, &args);
+	if (err) {
+		if (err != -ENOENT)
+			return err;
+
+		dev_warn_once(dev, "nvidia,pmc is missing, please update your device-tree\n");
+		return 0;
+	}
+
+	pmc_pdev = of_find_device_by_node(args.np);
+	of_node_put(args.np);
+	if (!pmc_pdev)
+		return -ENODEV;
+
+	err = devm_add_action_or_reset(dev, tegra_usb_phy_put_pmc_device,
+				       &pmc_pdev->dev);
+	if (err)
+		return err;
+
+	if (!platform_get_drvdata(pmc_pdev))
+		return -EPROBE_DEFER;
+
+	phy->pmc_regmap = dev_get_regmap(&pmc_pdev->dev, "usb_sleepwalk");
+	if (!phy->pmc_regmap)
+		return -EINVAL;
+
+	phy->instance = args.args[0];
+
+	return 0;
+}
+
 static const struct tegra_phy_soc_config tegra20_soc_config = {
 	.utmi_pll_config_in_car_module = false,
 	.has_hostpc = false,
 	.requires_usbmode_setup = false,
 	.requires_extra_tuning_parameters = false,
+	.requires_pmc_ao_power_up = false,
 };
 
 static const struct tegra_phy_soc_config tegra30_soc_config = {
@@ -1147,6 +1327,7 @@ static const struct tegra_phy_soc_config tegra30_soc_config = {
 	.has_hostpc = true,
 	.requires_usbmode_setup = true,
 	.requires_extra_tuning_parameters = true,
+	.requires_pmc_ao_power_up = true,
 };
 
 static const struct of_device_id tegra_usb_phy_id_table[] = {
@@ -1172,6 +1353,7 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	tegra_phy->soc_config = of_device_get_match_data(&pdev->dev);
+	tegra_phy->irq = platform_get_irq_optional(pdev, 0);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -1215,6 +1397,12 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
 		return err;
 	}
 
+	err = tegra_usb_phy_parse_pmc(&pdev->dev, tegra_phy);
+	if (err) {
+		dev_err_probe(&pdev->dev, err, "Failed to get PMC regmap\n");
+		return err;
+	}
+
 	phy_type = of_usb_get_phy_mode(np);
 	switch (phy_type) {
 	case USBPHY_INTERFACE_MODE_UTMI:
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 2db917eab799..29f4b87a9e74 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -131,17 +131,11 @@ static int ch341_control_in(struct usb_device *dev,
 	dev_dbg(&dev->dev, "%s - (%02x,%04x,%04x,%u)\n", __func__,
 		request, value, index, bufsize);
 
-	r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
-			    USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			    value, index, buf, bufsize, DEFAULT_TIMEOUT);
-	if (r < (int)bufsize) {
-		if (r >= 0) {
-			dev_err(&dev->dev,
-				"short control message received (%d < %u)\n",
-				r, bufsize);
-			r = -EIO;
-		}
-
+	r = usb_control_msg_recv(dev, 0, request,
+				 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+				 value, index, buf, bufsize, DEFAULT_TIMEOUT,
+				 GFP_KERNEL);
+	if (r) {
 		dev_err(&dev->dev, "failed to receive control message: %d\n",
 			r);
 		return r;
@@ -287,24 +281,19 @@ static int ch341_set_handshake(struct usb_device *dev, u8 control)
 static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
 {
 	const unsigned int size = 2;
-	char *buffer;
+	u8 buffer[2];
 	int r;
 	unsigned long flags;
 
-	buffer = kmalloc(size, GFP_KERNEL);
-	if (!buffer)
-		return -ENOMEM;
-
 	r = ch341_control_in(dev, CH341_REQ_READ_REG, 0x0706, 0, buffer, size);
-	if (r < 0)
-		goto out;
+	if (r)
+		return r;
 
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->msr = (~(*buffer)) & CH341_BITS_MODEM_STAT;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-out:	kfree(buffer);
-	return r;
+	return 0;
 }
 
 /* -------------------------------------------------------------------------- */
@@ -312,31 +301,28 @@ out:	kfree(buffer);
 static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
 {
 	const unsigned int size = 2;
-	char *buffer;
+	u8 buffer[2];
 	int r;
 
-	buffer = kmalloc(size, GFP_KERNEL);
-	if (!buffer)
-		return -ENOMEM;
-
 	/* expect two bytes 0x27 0x00 */
 	r = ch341_control_in(dev, CH341_REQ_READ_VERSION, 0, 0, buffer, size);
-	if (r < 0)
-		goto out;
+	if (r)
+		return r;
 	dev_dbg(&dev->dev, "Chip version: 0x%02x\n", buffer[0]);
 
 	r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, 0, 0);
 	if (r < 0)
-		goto out;
+		return r;
 
 	r = ch341_set_baudrate_lcr(dev, priv, priv->baud_rate, priv->lcr);
 	if (r < 0)
-		goto out;
+		return r;
 
 	r = ch341_set_handshake(dev, priv->mcr);
+	if (r < 0)
+		return r;
 
-out:	kfree(buffer);
-	return r;
+	return 0;
 }
 
 static int ch341_detect_quirks(struct usb_serial_port *port)
@@ -345,40 +331,27 @@ static int ch341_detect_quirks(struct usb_serial_port *port)
 	struct usb_device *udev = port->serial->dev;
 	const unsigned int size = 2;
 	unsigned long quirks = 0;
-	char *buffer;
+	u8 buffer[2];
 	int r;
 
-	buffer = kmalloc(size, GFP_KERNEL);
-	if (!buffer)
-		return -ENOMEM;
-
 	/*
 	 * A subset of CH34x devices does not support all features. The
 	 * prescaler is limited and there is no support for sending a RS232
 	 * break condition. A read failure when trying to set up the latter is
 	 * used to detect these devices.
 	 */
-	r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), CH341_REQ_READ_REG,
-			    USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-			    CH341_REG_BREAK, 0, buffer, size, DEFAULT_TIMEOUT);
+	r = usb_control_msg_recv(udev, 0, CH341_REQ_READ_REG,
+				 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+				 CH341_REG_BREAK, 0, &buffer, size,
+				 DEFAULT_TIMEOUT, GFP_KERNEL);
 	if (r == -EPIPE) {
 		dev_info(&port->dev, "break control not supported, using simulated break\n");
 		quirks = CH341_QUIRK_LIMITED_PRESCALER | CH341_QUIRK_SIMULATE_BREAK;
 		r = 0;
-		goto out;
-	}
-
-	if (r != size) {
-		if (r >= 0)
-			r = -EIO;
+	} else if (r) {
 		dev_err(&port->dev, "failed to read break control: %d\n", r);
-		goto out;
 	}
 
-	r = 0;
-out:
-	kfree(buffer);
-
 	if (quirks) {
 		dev_dbg(&port->dev, "enabling quirk flags: 0x%02lx\n", quirks);
 		priv->quirks |= quirks;
@@ -647,23 +620,19 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
 	struct ch341_private *priv = usb_get_serial_port_data(port);
 	int r;
 	uint16_t reg_contents;
-	uint8_t *break_reg;
+	uint8_t break_reg[2];
 
 	if (priv->quirks & CH341_QUIRK_SIMULATE_BREAK) {
 		ch341_simulate_break(tty, break_state);
 		return;
 	}
 
-	break_reg = kmalloc(2, GFP_KERNEL);
-	if (!break_reg)
-		return;
-
 	r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG,
 			ch341_break_reg, 0, break_reg, 2);
-	if (r < 0) {
+	if (r) {
 		dev_err(&port->dev, "%s - USB control read error (%d)\n",
 				__func__, r);
-		goto out;
+		return;
 	}
 	dev_dbg(&port->dev, "%s - initial ch341 break register contents - reg1: %x, reg2: %x\n",
 		__func__, break_reg[0], break_reg[1]);
@@ -684,8 +653,6 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
 	if (r < 0)
 		dev_err(&port->dev, "%s - USB control write error (%d)\n",
 				__func__, r);
-out:
-	kfree(break_reg);
 }
 
 static int ch341_tiocmset(struct tty_struct *tty,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 189279869a8b..7705328034ca 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -631,30 +631,20 @@ static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
 {
 	struct usb_serial *serial = port->serial;
 	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
-	void *dmabuf;
 	int result;
 
-	dmabuf = kmalloc(bufsize, GFP_KERNEL);
-	if (!dmabuf)
-		return -ENOMEM;
 
-	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-			req, REQTYPE_INTERFACE_TO_HOST, 0,
-			port_priv->bInterfaceNumber, dmabuf, bufsize,
-			USB_CTRL_GET_TIMEOUT);
-	if (result == bufsize) {
-		memcpy(buf, dmabuf, bufsize);
-		result = 0;
-	} else {
+	result = usb_control_msg_recv(serial->dev, 0, req,
+			REQTYPE_INTERFACE_TO_HOST, 0,
+			port_priv->bInterfaceNumber, buf, bufsize,
+			USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
+	if (result) {
 		dev_err(&port->dev, "failed get req 0x%x size %d status: %d\n",
 				req, bufsize, result);
-		if (result >= 0)
-			result = -EIO;
+		return result;
 	}
 
-	kfree(dmabuf);
-
-	return result;
+	return 0;
 }
 
 /*
@@ -672,31 +662,19 @@ static int cp210x_read_u8_reg(struct usb_serial_port *port, u8 req, u8 *val)
 static int cp210x_read_vendor_block(struct usb_serial *serial, u8 type, u16 val,
 				    void *buf, int bufsize)
 {
-	void *dmabuf;
 	int result;
 
-	dmabuf = kmalloc(bufsize, GFP_KERNEL);
-	if (!dmabuf)
-		return -ENOMEM;
-
-	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-				 CP210X_VENDOR_SPECIFIC, type, val,
-				 cp210x_interface_num(serial), dmabuf, bufsize,
-				 USB_CTRL_GET_TIMEOUT);
-	if (result == bufsize) {
-		memcpy(buf, dmabuf, bufsize);
-		result = 0;
-	} else {
+	result = usb_control_msg_recv(serial->dev, 0, CP210X_VENDOR_SPECIFIC,
+			type, val, cp210x_interface_num(serial), buf, bufsize,
+			USB_CTRL_GET_TIMEOUT, GFP_KERNEL);
+	if (result) {
 		dev_err(&serial->interface->dev,
 			"failed to get vendor val 0x%04x size %d: %d\n", val,
 			bufsize, result);
-		if (result >= 0)
-			result = -EIO;
+		return result;
 	}
 
-	kfree(dmabuf);
-
-	return result;
+	return 0;
 }
 
 /*
@@ -730,21 +708,13 @@ static int cp210x_write_reg_block(struct usb_serial_port *port, u8 req,
 {
 	struct usb_serial *serial = port->serial;
 	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
-	void *dmabuf;
 	int result;
 
-	dmabuf = kmemdup(buf, bufsize, GFP_KERNEL);
-	if (!dmabuf)
-		return -ENOMEM;
-
-	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			req, REQTYPE_HOST_TO_INTERFACE, 0,
-			port_priv->bInterfaceNumber, dmabuf, bufsize,
-			USB_CTRL_SET_TIMEOUT);
-
-	kfree(dmabuf);
-
-	if (result < 0) {
+	result = usb_control_msg_send(serial->dev, 0, req,
+			REQTYPE_HOST_TO_INTERFACE, 0,
+			port_priv->bInterfaceNumber, buf, bufsize,
+			USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
+	if (result) {
 		dev_err(&port->dev, "failed set req 0x%x size %d status: %d\n",
 				req, bufsize, result);
 		return result;
@@ -773,21 +743,12 @@ static int cp210x_write_u32_reg(struct usb_serial_port *port, u8 req, u32 val)
 static int cp210x_write_vendor_block(struct usb_serial *serial, u8 type,
 				     u16 val, void *buf, int bufsize)
 {
-	void *dmabuf;
 	int result;
 
-	dmabuf = kmemdup(buf, bufsize, GFP_KERNEL);
-	if (!dmabuf)
-		return -ENOMEM;
-
-	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-				 CP210X_VENDOR_SPECIFIC, type, val,
-				 cp210x_interface_num(serial), dmabuf, bufsize,
-				 USB_CTRL_SET_TIMEOUT);
-
-	kfree(dmabuf);
-
-	if (result < 0) {
+	result = usb_control_msg_send(serial->dev, 0, CP210X_VENDOR_SPECIFIC,
+			type, val, cp210x_interface_num(serial), buf, bufsize,
+			USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
+	if (result) {
 		dev_err(&serial->interface->dev,
 			"failed to set vendor val 0x%04x size %d: %d\n", val,
 			bufsize, result);
@@ -952,29 +913,21 @@ static int cp210x_get_tx_queue_byte_count(struct usb_serial_port *port,
 {
 	struct usb_serial *serial = port->serial;
 	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
-	struct cp210x_comm_status *sts;
+	struct cp210x_comm_status sts;
 	int result;
 
-	sts = kmalloc(sizeof(*sts), GFP_KERNEL);
-	if (!sts)
-		return -ENOMEM;
-
-	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-			CP210X_GET_COMM_STATUS, REQTYPE_INTERFACE_TO_HOST,
-			0, port_priv->bInterfaceNumber, sts, sizeof(*sts),
-			USB_CTRL_GET_TIMEOUT);
-	if (result == sizeof(*sts)) {
-		*count = le32_to_cpu(sts->ulAmountInOutQueue);
-		result = 0;
-	} else {
+	result = usb_control_msg_recv(serial->dev, 0, CP210X_GET_COMM_STATUS,
+			REQTYPE_INTERFACE_TO_HOST, 0,
+			port_priv->bInterfaceNumber, &sts, sizeof(sts),
+			USB_CTRL_GET_TIMEOUT, GFP_KERNEL);
+	if (result) {
 		dev_err(&port->dev, "failed to get comm status: %d\n", result);
-		if (result >= 0)
-			result = -EIO;
+		return result;
 	}
 
-	kfree(sts);
+	*count = le32_to_cpu(sts.ulAmountInOutQueue);
 
-	return result;
+	return 0;
 }
 
 static bool cp210x_tx_empty(struct usb_serial_port *port)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index a7a7af8d05bf..3ad1f515fb68 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -139,67 +139,46 @@ static int calc_baud_divisor(speed_t baudrate, speed_t clockrate)
 static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val)
 {
 	int status;
-	u8 *tmp;
 	struct usb_device *dev = port->serial->dev;
 
-	tmp = kmalloc(sizeof(*val), GFP_KERNEL);
-	if (!tmp)
-		return -ENOMEM;
-
-	status = usb_control_msg(dev,
-				usb_rcvctrlpipe(dev, 0),
-				F81232_REGISTER_REQUEST,
-				F81232_GET_REGISTER,
-				reg,
-				0,
-				tmp,
-				sizeof(*val),
-				USB_CTRL_GET_TIMEOUT);
-	if (status != sizeof(*val)) {
+	status = usb_control_msg_recv(dev,
+				      0,
+				      F81232_REGISTER_REQUEST,
+				      F81232_GET_REGISTER,
+				      reg,
+				      0,
+				      val,
+				      sizeof(*val),
+				      USB_CTRL_GET_TIMEOUT,
+				      GFP_KERNEL);
+	if (status) {
 		dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
-
-		if (status < 0)
-			status = usb_translate_errors(status);
-		else
-			status = -EIO;
-	} else {
-		status = 0;
-		*val = *tmp;
+		status = usb_translate_errors(status);
 	}
 
-	kfree(tmp);
 	return status;
 }
 
 static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val)
 {
 	int status;
-	u8 *tmp;
 	struct usb_device *dev = port->serial->dev;
 
-	tmp = kmalloc(sizeof(val), GFP_KERNEL);
-	if (!tmp)
-		return -ENOMEM;
-
-	*tmp = val;
-
-	status = usb_control_msg(dev,
-				usb_sndctrlpipe(dev, 0),
-				F81232_REGISTER_REQUEST,
-				F81232_SET_REGISTER,
-				reg,
-				0,
-				tmp,
-				sizeof(val),
-				USB_CTRL_SET_TIMEOUT);
-	if (status < 0) {
+	status = usb_control_msg_send(dev,
+				      0,
+				      F81232_REGISTER_REQUEST,
+				      F81232_SET_REGISTER,
+				      reg,
+				      0,
+				      &val,
+				      sizeof(val),
+				      USB_CTRL_SET_TIMEOUT,
+				      GFP_KERNEL);
+	if (status) {
 		dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
 		status = usb_translate_errors(status);
-	} else {
-		status = 0;
 	}
 
-	kfree(tmp);
 	return status;
 }
 
@@ -857,28 +836,22 @@ static int f81534a_ctrl_set_register(struct usb_interface *intf, u16 reg,
 	struct usb_device *dev = interface_to_usbdev(intf);
 	int retry = F81534A_ACCESS_REG_RETRY;
 	int status;
-	u8 *tmp;
-
-	tmp = kmemdup(val, size, GFP_KERNEL);
-	if (!tmp)
-		return -ENOMEM;
 
 	while (retry--) {
-		status = usb_control_msg(dev,
-					usb_sndctrlpipe(dev, 0),
-					F81232_REGISTER_REQUEST,
-					F81232_SET_REGISTER,
-					reg,
-					0,
-					tmp,
-					size,
-					USB_CTRL_SET_TIMEOUT);
-		if (status < 0) {
+		status = usb_control_msg_send(dev,
+					      0,
+					      F81232_REGISTER_REQUEST,
+					      F81232_SET_REGISTER,
+					      reg,
+					      0,
+					      val,
+					      size,
+					      USB_CTRL_SET_TIMEOUT,
+					      GFP_KERNEL);
+		if (status) {
 			status = usb_translate_errors(status);
 			if (status == -EIO)
 				continue;
-		} else {
-			status = 0;
 		}
 
 		break;
@@ -889,7 +862,6 @@ static int f81534a_ctrl_set_register(struct usb_interface *intf, u16 reg,
 				reg, status);
 	}
 
-	kfree(tmp);
 	return status;
 }
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 99d19828dae6..4edebd14ef29 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1437,27 +1437,15 @@ static int _read_latency_timer(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct usb_device *udev = port->serial->dev;
-	unsigned char *buf;
+	u8 buf;
 	int rv;
 
-	buf = kmalloc(1, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	rv = usb_control_msg(udev,
-			     usb_rcvctrlpipe(udev, 0),
-			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
-			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
-			     0, priv->interface,
-			     buf, 1, WDR_TIMEOUT);
-	if (rv < 1) {
-		if (rv >= 0)
-			rv = -EIO;
-	} else {
-		rv = buf[0];
-	}
-
-	kfree(buf);
+	rv = usb_control_msg_recv(udev, 0, FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
+				  FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, 0,
+				  priv->interface, &buf, 1, WDR_TIMEOUT,
+				  GFP_KERNEL);
+	if (rv == 0)
+		rv = buf;
 
 	return rv;
 }
@@ -1852,32 +1840,21 @@ static int ftdi_read_cbus_pins(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct usb_serial *serial = port->serial;
-	unsigned char *buf;
+	u8 buf;
 	int result;
 
 	result = usb_autopm_get_interface(serial->interface);
 	if (result)
 		return result;
 
-	buf = kmalloc(1, GFP_KERNEL);
-	if (!buf) {
-		usb_autopm_put_interface(serial->interface);
-		return -ENOMEM;
-	}
-
-	result = usb_control_msg(serial->dev,
-				 usb_rcvctrlpipe(serial->dev, 0),
-				 FTDI_SIO_READ_PINS_REQUEST,
-				 FTDI_SIO_READ_PINS_REQUEST_TYPE, 0,
-				 priv->interface, buf, 1, WDR_TIMEOUT);
-	if (result < 1) {
-		if (result >= 0)
-			result = -EIO;
-	} else {
-		result = buf[0];
-	}
+	result = usb_control_msg_recv(serial->dev, 0,
+				      FTDI_SIO_READ_PINS_REQUEST,
+				      FTDI_SIO_READ_PINS_REQUEST_TYPE, 0,
+				      priv->interface, &buf, 1, WDR_TIMEOUT,
+				      GFP_KERNEL);
+	if (result == 0)
+		result = buf;
 
-	kfree(buf);
 	usb_autopm_put_interface(serial->interface);
 
 	return result;
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 87b89c99d517..1cfcd805f286 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2890,22 +2890,22 @@ static int keyspan_port_probe(struct usb_serial_port *port)
 	for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) {
 		p_priv->in_buffer[i] = kzalloc(IN_BUFLEN, GFP_KERNEL);
 		if (!p_priv->in_buffer[i])
-			goto err_in_buffer;
+			goto err_free_in_buffer;
 	}
 
 	for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) {
 		p_priv->out_buffer[i] = kzalloc(OUT_BUFLEN, GFP_KERNEL);
 		if (!p_priv->out_buffer[i])
-			goto err_out_buffer;
+			goto err_free_out_buffer;
 	}
 
 	p_priv->inack_buffer = kzalloc(INACK_BUFLEN, GFP_KERNEL);
 	if (!p_priv->inack_buffer)
-		goto err_inack_buffer;
+		goto err_free_out_buffer;
 
 	p_priv->outcont_buffer = kzalloc(OUTCONT_BUFLEN, GFP_KERNEL);
 	if (!p_priv->outcont_buffer)
-		goto err_outcont_buffer;
+		goto err_free_inack_buffer;
 
 	p_priv->device_details = d_details;
 
@@ -2951,15 +2951,14 @@ static int keyspan_port_probe(struct usb_serial_port *port)
 
 	return 0;
 
-err_outcont_buffer:
+err_free_inack_buffer:
 	kfree(p_priv->inack_buffer);
-err_inack_buffer:
+err_free_out_buffer:
 	for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i)
 		kfree(p_priv->out_buffer[i]);
-err_out_buffer:
+err_free_in_buffer:
 	for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i)
 		kfree(p_priv->in_buffer[i]);
-err_in_buffer:
 	kfree(p_priv);
 
 	return -ENOMEM;
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 39b0f5f344c2..3e7628becdcd 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -77,36 +77,27 @@ static int keyspan_pda_get_write_room(struct keyspan_pda_private *priv)
 {
 	struct usb_serial_port *port = priv->port;
 	struct usb_serial *serial = port->serial;
-	u8 *room;
+	u8 room;
 	int rc;
 
-	room = kmalloc(1, GFP_KERNEL);
-	if (!room)
-		return -ENOMEM;
-
-	rc = usb_control_msg(serial->dev,
-			     usb_rcvctrlpipe(serial->dev, 0),
-			     6, /* write_room */
-			     USB_TYPE_VENDOR | USB_RECIP_INTERFACE
-			     | USB_DIR_IN,
-			     0, /* value: 0 means "remaining room" */
-			     0, /* index */
-			     room,
-			     1,
-			     2000);
-	if (rc != 1) {
-		if (rc >= 0)
-			rc = -EIO;
+	rc = usb_control_msg_recv(serial->dev,
+				  0,
+				  6, /* write_room */
+				  USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_IN,
+				  0, /* value: 0 means "remaining room" */
+				  0, /* index */
+				  &room,
+				  1,
+				  2000,
+				  GFP_KERNEL);
+	if (rc) {
 		dev_dbg(&port->dev, "roomquery failed: %d\n", rc);
-		goto out_free;
+		return rc;
 	}
 
-	dev_dbg(&port->dev, "roomquery says %d\n", *room);
-	rc = *room;
-out_free:
-	kfree(room);
+	dev_dbg(&port->dev, "roomquery says %d\n", room);
 
-	return rc;
+	return room;
 }
 
 static void keyspan_pda_request_unthrottle(struct work_struct *work)
@@ -381,22 +372,20 @@ static int keyspan_pda_get_modem_info(struct usb_serial *serial,
 				      unsigned char *value)
 {
 	int rc;
-	u8 *data;
-
-	data = kmalloc(1, GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-			     3, /* get pins */
-			     USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN,
-			     0, 0, data, 1, 2000);
-	if (rc == 1)
-		*value = *data;
-	else if (rc >= 0)
-		rc = -EIO;
+	u8 data;
+
+	rc = usb_control_msg_recv(serial->dev, 0,
+				  3, /* get pins */
+				  USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_IN,
+				  0,
+				  0,
+				  &data,
+				  1,
+				  2000,
+				  GFP_KERNEL);
+	if (rc == 0)
+		*value = data;
 
-	kfree(data);
 	return rc;
 }
 
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index f1e9628a9907..edcc57bd9b5e 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -124,16 +124,18 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port,
 {
 	int rc;
 
-	rc = usb_control_msg(port->serial->dev,
-			usb_sndctrlpipe(port->serial->dev, 0),
-			KL5KUSB105A_SIO_SET_DATA,
-			USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE,
-			0, /* value */
-			0, /* index */
-			settings,
-			sizeof(struct klsi_105_port_settings),
-			KLSI_TIMEOUT);
-	if (rc < 0)
+	rc = usb_control_msg_send(port->serial->dev,
+				  0,
+				  KL5KUSB105A_SIO_SET_DATA,
+				  USB_TYPE_VENDOR | USB_DIR_OUT |
+				  USB_RECIP_INTERFACE,
+				  0, /* value */
+				  0, /* index */
+				  settings,
+				  sizeof(struct klsi_105_port_settings),
+				  KLSI_TIMEOUT,
+				  GFP_KERNEL);
+	if (rc)
 		dev_err(&port->dev,
 			"Change port settings failed (error = %d)\n", rc);
 
@@ -145,61 +147,37 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port,
 	return rc;
 }
 
-/* translate a 16-bit status value from the device to linux's TIO bits */
-static unsigned long klsi_105_status2linestate(const __u16 status)
-{
-	unsigned long res = 0;
-
-	res =   ((status & KL5KUSB105A_DSR) ? TIOCM_DSR : 0)
-	      | ((status & KL5KUSB105A_CTS) ? TIOCM_CTS : 0)
-	      ;
-
-	return res;
-}
-
 /*
  * Read line control via vendor command and return result through
- * *line_state_p
+ * the state pointer.
  */
-/* It seems that the status buffer has always only 2 bytes length */
-#define KLSI_STATUSBUF_LEN	2
 static int klsi_105_get_line_state(struct usb_serial_port *port,
-				   unsigned long *line_state_p)
+				   unsigned long *state)
 {
+	u16 status;
 	int rc;
-	u8 *status_buf;
-	__u16 status;
-
-	status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL);
-	if (!status_buf)
-		return -ENOMEM;
 
-	status_buf[0] = 0xff;
-	status_buf[1] = 0xff;
-	rc = usb_control_msg(port->serial->dev,
-			     usb_rcvctrlpipe(port->serial->dev, 0),
-			     KL5KUSB105A_SIO_POLL,
-			     USB_TYPE_VENDOR | USB_DIR_IN,
-			     0, /* value */
-			     0, /* index */
-			     status_buf, KLSI_STATUSBUF_LEN,
-			     10000
-			     );
-	if (rc != KLSI_STATUSBUF_LEN) {
+	rc = usb_control_msg_recv(port->serial->dev, 0,
+				  KL5KUSB105A_SIO_POLL,
+				  USB_TYPE_VENDOR | USB_DIR_IN,
+				  0, /* value */
+				  0, /* index */
+				  &status, sizeof(status),
+				  10000,
+				  GFP_KERNEL);
+	if (rc) {
 		dev_err(&port->dev, "reading line status failed: %d\n", rc);
-		if (rc >= 0)
-			rc = -EIO;
-	} else {
-		status = get_unaligned_le16(status_buf);
+		return rc;
+	}
 
-		dev_dbg(&port->dev, "read status %02x %02x\n",
-			status_buf[0], status_buf[1]);
+	le16_to_cpus(&status);
 
-		*line_state_p = klsi_105_status2linestate(status);
-	}
+	dev_dbg(&port->dev, "read status %04x\n", status);
 
-	kfree(status_buf);
-	return rc;
+	*state = ((status & KL5KUSB105A_DSR) ? TIOCM_DSR : 0) |
+		 ((status & KL5KUSB105A_CTS) ? TIOCM_CTS : 0);
+
+	return 0;
 }
 
 
@@ -245,7 +223,7 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	int retval = 0;
 	int rc;
 	unsigned long line_state;
-	struct klsi_105_port_settings *cfg;
+	struct klsi_105_port_settings cfg;
 	unsigned long flags;
 
 	/* Do a defined restart:
@@ -255,27 +233,22 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	 * Then read the modem line control and store values in
 	 * priv->line_state.
 	 */
-	cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
-	if (!cfg)
-		return -ENOMEM;
 
-	cfg->pktlen   = 5;
-	cfg->baudrate = kl5kusb105a_sio_b9600;
-	cfg->databits = kl5kusb105a_dtb_8;
-	cfg->unknown1 = 0;
-	cfg->unknown2 = 1;
-	klsi_105_chg_port_settings(port, cfg);
+	cfg.pktlen   = 5;
+	cfg.baudrate = kl5kusb105a_sio_b9600;
+	cfg.databits = kl5kusb105a_dtb_8;
+	cfg.unknown1 = 0;
+	cfg.unknown2 = 1;
+	klsi_105_chg_port_settings(port, &cfg);
 
 	spin_lock_irqsave(&priv->lock, flags);
-	priv->cfg.pktlen   = cfg->pktlen;
-	priv->cfg.baudrate = cfg->baudrate;
-	priv->cfg.databits = cfg->databits;
-	priv->cfg.unknown1 = cfg->unknown1;
-	priv->cfg.unknown2 = cfg->unknown2;
+	priv->cfg.pktlen   = cfg.pktlen;
+	priv->cfg.baudrate = cfg.baudrate;
+	priv->cfg.databits = cfg.databits;
+	priv->cfg.unknown1 = cfg.unknown1;
+	priv->cfg.unknown2 = cfg.unknown2;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	kfree(cfg);
-
 	/* READ_ON and urb submission */
 	rc = usb_serial_generic_open(tty, port);
 	if (rc)
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 090a78c948f2..24101bd7fcad 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -208,8 +208,8 @@ void usb_serial_put(struct usb_serial *serial)
  *
  * This is the first place a new tty gets used.  Hence this is where we
  * acquire references to the usb_serial structure and the driver module,
- * where we store a pointer to the port, and where we do an autoresume.
- * All these actions are reversed in serial_cleanup().
+ * where we store a pointer to the port.  All these actions are reversed
+ * in serial_cleanup().
  */
 static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
 {
@@ -225,17 +225,13 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
 
 	serial = port->serial;
 	if (!try_module_get(serial->type->driver.owner))
-		goto error_module_get;
-
-	retval = usb_autopm_get_interface(serial->interface);
-	if (retval)
-		goto error_get_interface;
+		goto err_put_serial;
 
 	init_termios = (driver->termios[idx] == NULL);
 
 	retval = tty_standard_install(driver, tty);
 	if (retval)
-		goto error_init_termios;
+		goto err_put_module;
 
 	mutex_unlock(&serial->disc_mutex);
 
@@ -247,11 +243,9 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
 
 	return retval;
 
- error_init_termios:
-	usb_autopm_put_interface(serial->interface);
- error_get_interface:
+err_put_module:
 	module_put(serial->type->driver.owner);
- error_module_get:
+err_put_serial:
 	usb_serial_put(serial);
 	mutex_unlock(&serial->disc_mutex);
 	return retval;
@@ -265,10 +259,19 @@ static int serial_port_activate(struct tty_port *tport, struct tty_struct *tty)
 	int retval;
 
 	mutex_lock(&serial->disc_mutex);
-	if (serial->disconnected)
+	if (serial->disconnected) {
 		retval = -ENODEV;
-	else
-		retval = port->serial->type->open(tty, port);
+		goto out_unlock;
+	}
+
+	retval = usb_autopm_get_interface(serial->interface);
+	if (retval)
+		goto out_unlock;
+
+	retval = port->serial->type->open(tty, port);
+	if (retval)
+		usb_autopm_put_interface(serial->interface);
+out_unlock:
 	mutex_unlock(&serial->disc_mutex);
 
 	if (retval < 0)
@@ -304,6 +307,8 @@ static void serial_port_shutdown(struct tty_port *tport)
 
 	if (drv->close)
 		drv->close(port);
+
+	usb_autopm_put_interface(port->serial->interface);
 }
 
 static void serial_hangup(struct tty_struct *tty)
@@ -352,8 +357,6 @@ static void serial_cleanup(struct tty_struct *tty)
 	serial = port->serial;
 	owner = serial->type->driver.owner;
 
-	usb_autopm_put_interface(serial->interface);
-
 	usb_serial_put(serial);
 	module_put(owner);
 }
@@ -1328,7 +1331,7 @@ static int __init usb_serial_init(void)
 	result = bus_register(&usb_serial_bus_type);
 	if (result) {
 		pr_err("%s - registering bus driver failed\n", __func__);
-		goto exit_bus;
+		goto err_put_driver;
 	}
 
 	usb_serial_tty_driver->driver_name = "usbserial";
@@ -1346,25 +1349,23 @@ static int __init usb_serial_init(void)
 	result = tty_register_driver(usb_serial_tty_driver);
 	if (result) {
 		pr_err("%s - tty_register_driver failed\n", __func__);
-		goto exit_reg_driver;
+		goto err_unregister_bus;
 	}
 
 	/* register the generic driver, if we should */
 	result = usb_serial_generic_register();
 	if (result < 0) {
 		pr_err("%s - registering generic driver failed\n", __func__);
-		goto exit_generic;
+		goto err_unregister_driver;
 	}
 
 	return result;
 
-exit_generic:
+err_unregister_driver:
 	tty_unregister_driver(usb_serial_tty_driver);
-
-exit_reg_driver:
+err_unregister_bus:
 	bus_unregister(&usb_serial_bus_type);
-
-exit_bus:
+err_put_driver:
 	pr_err("%s - returning with error %d\n", __func__, result);
 	tty_driver_kref_put(usb_serial_tty_driver);
 	return result;
@@ -1509,13 +1510,13 @@ int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[]
 
 	rc = usb_register(udriver);
 	if (rc)
-		goto failed_usb_register;
+		goto err_free_driver;
 
 	for (sd = serial_drivers; *sd; ++sd) {
 		(*sd)->usb_driver = udriver;
 		rc = usb_serial_register(*sd);
 		if (rc)
-			goto failed;
+			goto err_deregister_drivers;
 	}
 
 	/* Now set udriver's id_table and look for matches */
@@ -1523,11 +1524,11 @@ int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[]
 	rc = driver_attach(&udriver->drvwrap.driver);
 	return 0;
 
- failed:
+err_deregister_drivers:
 	while (sd-- > serial_drivers)
 		usb_serial_deregister(*sd);
 	usb_deregister(udriver);
-failed_usb_register:
+err_free_driver:
 	kfree(udriver);
 	return rc;
 }
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index c6b3fcf90180..29191d33c0e3 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -407,6 +407,16 @@ UNUSUAL_DEV(  0x04b8, 0x0602, 0x0110, 0x0110,
 		USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_SINGLE_LUN),
 
 /*
+ * Reported by James Buren <braewoods+lkml@braewoods.net>
+ * Virtual ISOs cannot be remounted if ejected while the device is locked
+ * Disable locking to mimic Windows behavior that bypasses the issue
+ */
+UNUSUAL_DEV(  0x04c5, 0x2028, 0x0001, 0x0001,
+		"iODD",
+		"2531/2541",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE),
+
+/*
  * Not sure who reported this originally but
  * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
  * flag be added */
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index a0418f23b4aa..ab480f38523a 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -65,9 +65,9 @@ config TYPEC_HD3SS3220
 
 config TYPEC_STUSB160X
 	tristate "STMicroelectronics STUSB160x Type-C controller driver"
-	depends on I2C
-	depends on REGMAP_I2C
 	depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
+	depends on I2C
+	select REGMAP_I2C
 	help
 	  Say Y or M here if your system has STMicroelectronics STUSB160x
 	  Type-C port controller.
diff --git a/drivers/usb/typec/hd3ss3220.c b/drivers/usb/typec/hd3ss3220.c
index f633ec15b1a1..cd47c3597e19 100644
--- a/drivers/usb/typec/hd3ss3220.c
+++ b/drivers/usb/typec/hd3ss3220.c
@@ -125,11 +125,9 @@ static irqreturn_t hd3ss3220_irq(struct hd3ss3220 *hd3ss3220)
 	int err;
 
 	hd3ss3220_set_role(hd3ss3220);
-	err = regmap_update_bits_base(hd3ss3220->regmap,
-				      HD3SS3220_REG_CN_STAT_CTRL,
-				      HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS,
-				      HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS,
-				      NULL, false, true);
+	err = regmap_write_bits(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT_CTRL,
+				HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS,
+				HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS);
 	if (err < 0)
 		return IRQ_NONE;
 
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index c15eec9cc460..35a1307349a2 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -258,7 +258,7 @@ static int tcpci_set_polarity(struct tcpc_dev *tcpc,
 	 * When port has drp toggling enabled, ROLE_CONTROL would only have the initial
 	 * terminations for the toggling and does not indicate the final cc
 	 * terminations when ConnectionResult is 0 i.e. drp toggling stops and
-	 * the connection is resolbed. Infer port role from TCPC_CC_STATUS based on the
+	 * the connection is resolved. Infer port role from TCPC_CC_STATUS based on the
 	 * terminations seen. The port role is then used to set the cc terminations.
 	 */
 	if (reg & TCPC_ROLE_CTRL_DRP) {
diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index ea4cc0a6e40c..fb8ef12bbe9c 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -9,6 +9,7 @@
 #include <linux/i2c.h>
 #include <linux/acpi.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/power_supply.h>
 #include <linux/regmap.h>
 #include <linux/interrupt.h>
@@ -29,6 +30,7 @@
 #define TPS_REG_INT_MASK2		0x17
 #define TPS_REG_INT_CLEAR1		0x18
 #define TPS_REG_INT_CLEAR2		0x19
+#define TPS_REG_SYSTEM_POWER_STATE	0x20
 #define TPS_REG_STATUS			0x1a
 #define TPS_REG_SYSTEM_CONF		0x28
 #define TPS_REG_CTRL_CONF		0x29
@@ -117,13 +119,13 @@ tps6598x_block_read(struct tps6598x *tps, u8 reg, void *val, size_t len)
 	u8 data[TPS_MAX_LEN + 1];
 	int ret;
 
-	if (WARN_ON(len + 1 > sizeof(data)))
+	if (len + 1 > sizeof(data))
 		return -EINVAL;
 
 	if (!tps->i2c_protocol)
 		return regmap_raw_read(tps->regmap, reg, val, len);
 
-	ret = regmap_raw_read(tps->regmap, reg, data, sizeof(data));
+	ret = regmap_raw_read(tps->regmap, reg, data, len + 1);
 	if (ret)
 		return ret;
 
@@ -139,13 +141,21 @@ static int tps6598x_block_write(struct tps6598x *tps, u8 reg,
 {
 	u8 data[TPS_MAX_LEN + 1];
 
+	if (len + 1 > sizeof(data))
+		return -EINVAL;
+
 	if (!tps->i2c_protocol)
 		return regmap_raw_write(tps->regmap, reg, val, len);
 
 	data[0] = len;
 	memcpy(&data[1], val, len);
 
-	return regmap_raw_write(tps->regmap, reg, data, sizeof(data));
+	return regmap_raw_write(tps->regmap, reg, data, len + 1);
+}
+
+static inline int tps6598x_read8(struct tps6598x *tps, u8 reg, u8 *val)
+{
+	return tps6598x_block_read(tps, reg, val, sizeof(u8));
 }
 
 static inline int tps6598x_read16(struct tps6598x *tps, u8 reg, u16 *val)
@@ -401,13 +411,114 @@ static const struct typec_operations tps6598x_ops = {
 	.pr_set = tps6598x_pr_set,
 };
 
+static bool tps6598x_read_status(struct tps6598x *tps, u32 *status)
+{
+	int ret;
+
+	ret = tps6598x_read32(tps, TPS_REG_STATUS, status);
+	if (ret) {
+		dev_err(tps->dev, "%s: failed to read status\n", __func__);
+		return false;
+	}
+	trace_tps6598x_status(*status);
+
+	return true;
+}
+
+static bool tps6598x_read_data_status(struct tps6598x *tps)
+{
+	u32 data_status;
+	int ret;
+
+	ret = tps6598x_read32(tps, TPS_REG_DATA_STATUS, &data_status);
+	if (ret < 0) {
+		dev_err(tps->dev, "failed to read data status: %d\n", ret);
+		return false;
+	}
+	trace_tps6598x_data_status(data_status);
+
+	return true;
+}
+
+static bool tps6598x_read_power_status(struct tps6598x *tps)
+{
+	u16 pwr_status;
+	int ret;
+
+	ret = tps6598x_read16(tps, TPS_REG_POWER_STATUS, &pwr_status);
+	if (ret < 0) {
+		dev_err(tps->dev, "failed to read power status: %d\n", ret);
+		return false;
+	}
+	trace_tps6598x_power_status(pwr_status);
+
+	return true;
+}
+
+static void tps6598x_handle_plug_event(struct tps6598x *tps, u32 status)
+{
+	int ret;
+
+	if (status & TPS_STATUS_PLUG_PRESENT) {
+		ret = tps6598x_connect(tps, status);
+		if (ret)
+			dev_err(tps->dev, "failed to register partner\n");
+	} else {
+		tps6598x_disconnect(tps, status);
+	}
+}
+
+static irqreturn_t cd321x_interrupt(int irq, void *data)
+{
+	struct tps6598x *tps = data;
+	u64 event;
+	u32 status;
+	int ret;
+
+	mutex_lock(&tps->lock);
+
+	ret = tps6598x_read64(tps, TPS_REG_INT_EVENT1, &event);
+	if (ret) {
+		dev_err(tps->dev, "%s: failed to read events\n", __func__);
+		goto err_unlock;
+	}
+	trace_cd321x_irq(event);
+
+	if (!event)
+		goto err_unlock;
+
+	if (!tps6598x_read_status(tps, &status))
+		goto err_clear_ints;
+
+	if (event & APPLE_CD_REG_INT_POWER_STATUS_UPDATE)
+		if (!tps6598x_read_power_status(tps))
+			goto err_clear_ints;
+
+	if (event & APPLE_CD_REG_INT_DATA_STATUS_UPDATE)
+		if (!tps6598x_read_data_status(tps))
+			goto err_clear_ints;
+
+	/* Handle plug insert or removal */
+	if (event & APPLE_CD_REG_INT_PLUG_EVENT)
+		tps6598x_handle_plug_event(tps, status);
+
+err_clear_ints:
+	tps6598x_write64(tps, TPS_REG_INT_CLEAR1, event);
+
+err_unlock:
+	mutex_unlock(&tps->lock);
+
+	if (event)
+		return IRQ_HANDLED;
+	return IRQ_NONE;
+}
+
 static irqreturn_t tps6598x_interrupt(int irq, void *data)
 {
 	struct tps6598x *tps = data;
 	u64 event1;
 	u64 event2;
-	u32 status, data_status;
-	u16 pwr_status;
+	u32 status;
 	int ret;
 
 	mutex_lock(&tps->lock);
@@ -420,42 +531,23 @@ static irqreturn_t tps6598x_interrupt(int irq, void *data)
 	}
 	trace_tps6598x_irq(event1, event2);
 
-	ret = tps6598x_read32(tps, TPS_REG_STATUS, &status);
-	if (ret) {
-		dev_err(tps->dev, "%s: failed to read status\n", __func__);
+	if (!(event1 | event2))
+		goto err_unlock;
+
+	if (!tps6598x_read_status(tps, &status))
 		goto err_clear_ints;
-	}
-	trace_tps6598x_status(status);
 
-	if ((event1 | event2) & TPS_REG_INT_POWER_STATUS_UPDATE) {
-		ret = tps6598x_read16(tps, TPS_REG_POWER_STATUS, &pwr_status);
-		if (ret < 0) {
-			dev_err(tps->dev, "failed to read power status: %d\n", ret);
+	if ((event1 | event2) & TPS_REG_INT_POWER_STATUS_UPDATE)
+		if (!tps6598x_read_power_status(tps))
 			goto err_clear_ints;
-		}
-		trace_tps6598x_power_status(pwr_status);
-	}
 
-	if ((event1 | event2) & TPS_REG_INT_DATA_STATUS_UPDATE) {
-		ret = tps6598x_read32(tps, TPS_REG_DATA_STATUS, &data_status);
-		if (ret < 0) {
-			dev_err(tps->dev, "failed to read data status: %d\n", ret);
+	if ((event1 | event2) & TPS_REG_INT_DATA_STATUS_UPDATE)
+		if (!tps6598x_read_data_status(tps))
 			goto err_clear_ints;
-		}
-		trace_tps6598x_data_status(data_status);
-	}
 
 	/* Handle plug insert or removal */
-	if ((event1 | event2) & TPS_REG_INT_PLUG_EVENT) {
-		if (status & TPS_STATUS_PLUG_PRESENT) {
-			ret = tps6598x_connect(tps, status);
-			if (ret)
-				dev_err(tps->dev,
-					"failed to register partner\n");
-		} else {
-			tps6598x_disconnect(tps, status);
-		}
-	}
+	if ((event1 | event2) & TPS_REG_INT_PLUG_EVENT)
+		tps6598x_handle_plug_event(tps, status);
 
 err_clear_ints:
 	tps6598x_write64(tps, TPS_REG_INT_CLEAR1, event1);
@@ -464,7 +556,9 @@ err_clear_ints:
 err_unlock:
 	mutex_unlock(&tps->lock);
 
-	return IRQ_HANDLED;
+	if (event1 | event2)
+		return IRQ_HANDLED;
+	return IRQ_NONE;
 }
 
 static int tps6598x_check_mode(struct tps6598x *tps)
@@ -547,6 +641,32 @@ static int tps6598x_psy_get_prop(struct power_supply *psy,
 	return ret;
 }
 
+static int cd321x_switch_power_state(struct tps6598x *tps, u8 target_state)
+{
+	u8 state;
+	int ret;
+
+	ret = tps6598x_read8(tps, TPS_REG_SYSTEM_POWER_STATE, &state);
+	if (ret)
+		return ret;
+
+	if (state == target_state)
+		return 0;
+
+	ret = tps6598x_exec_cmd(tps, "SPSS", sizeof(u8), &target_state, 0, NULL);
+	if (ret)
+		return ret;
+
+	ret = tps6598x_read8(tps, TPS_REG_SYSTEM_POWER_STATE, &state);
+	if (ret)
+		return ret;
+
+	if (state != target_state)
+		return -EINVAL;
+
+	return 0;
+}
+
 static int devm_tps6598_psy_register(struct tps6598x *tps)
 {
 	struct power_supply_config psy_cfg = {};
@@ -578,6 +698,8 @@ static int devm_tps6598_psy_register(struct tps6598x *tps)
 
 static int tps6598x_probe(struct i2c_client *client)
 {
+	irq_handler_t irq_handler = tps6598x_interrupt;
+	struct device_node *np = client->dev.of_node;
 	struct typec_capability typec_cap = { };
 	struct tps6598x *tps;
 	struct fwnode_handle *fwnode;
@@ -604,9 +726,6 @@ static int tps6598x_probe(struct i2c_client *client)
 	/*
 	 * Checking can the adapter handle SMBus protocol. If it can not, the
 	 * driver needs to take care of block reads separately.
-	 *
-	 * FIXME: Testing with I2C_FUNC_I2C. regmap-i2c uses I2C protocol
-	 * unconditionally if the adapter has I2C_FUNC_I2C set.
 	 */
 	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
 		tps->i2c_protocol = true;
@@ -616,6 +735,31 @@ static int tps6598x_probe(struct i2c_client *client)
 	if (ret)
 		return ret;
 
+	if (np && of_device_is_compatible(np, "apple,cd321x")) {
+		/* Switch CD321X chips to the correct system power state */
+		ret = cd321x_switch_power_state(tps, TPS_SYSTEM_POWER_STATE_S0);
+		if (ret)
+			return ret;
+
+		/* CD321X chips have all interrupts masked initially */
+		ret = tps6598x_write64(tps, TPS_REG_INT_MASK1,
+					APPLE_CD_REG_INT_POWER_STATUS_UPDATE |
+					APPLE_CD_REG_INT_DATA_STATUS_UPDATE |
+					APPLE_CD_REG_INT_PLUG_EVENT);
+		if (ret)
+			return ret;
+
+		irq_handler = cd321x_interrupt;
+	} else {
+		/* Enable power status, data status and plug event interrupts */
+		ret = tps6598x_write64(tps, TPS_REG_INT_MASK1,
+				       TPS_REG_INT_POWER_STATUS_UPDATE |
+				       TPS_REG_INT_DATA_STATUS_UPDATE |
+				       TPS_REG_INT_PLUG_EVENT);
+		if (ret)
+			return ret;
+	}
+
 	ret = tps6598x_read32(tps, TPS_REG_STATUS, &status);
 	if (ret < 0)
 		return ret;
@@ -695,7 +839,7 @@ static int tps6598x_probe(struct i2c_client *client)
 	}
 
 	ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
-					tps6598x_interrupt,
+					irq_handler,
 					IRQF_SHARED | IRQF_ONESHOT,
 					dev_name(&client->dev), tps);
 	if (ret) {
@@ -729,6 +873,7 @@ static int tps6598x_remove(struct i2c_client *client)
 
 static const struct of_device_id tps6598x_of_match[] = {
 	{ .compatible = "ti,tps6598x", },
+	{ .compatible = "apple,cd321x", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, tps6598x_of_match);
diff --git a/drivers/usb/typec/tipd/tps6598x.h b/drivers/usb/typec/tipd/tps6598x.h
index 003a577be216..3dae84c524fb 100644
--- a/drivers/usb/typec/tipd/tps6598x.h
+++ b/drivers/usb/typec/tipd/tps6598x.h
@@ -129,6 +129,18 @@
 #define TPS_REG_INT_HARD_RESET				BIT(1)
 #define TPS_REG_INT_PD_SOFT_RESET			BIT(0)
 
+/* Apple-specific TPS_REG_INT_* bits */
+#define APPLE_CD_REG_INT_DATA_STATUS_UPDATE		BIT(10)
+#define APPLE_CD_REG_INT_POWER_STATUS_UPDATE		BIT(9)
+#define APPLE_CD_REG_INT_STATUS_UPDATE			BIT(8)
+#define APPLE_CD_REG_INT_PLUG_EVENT			BIT(1)
+
+/* TPS_REG_SYSTEM_POWER_STATE states */
+#define TPS_SYSTEM_POWER_STATE_S0	0x00
+#define TPS_SYSTEM_POWER_STATE_S3	0x03
+#define TPS_SYSTEM_POWER_STATE_S4	0x04
+#define TPS_SYSTEM_POWER_STATE_S5	0x05
+
 /* TPS_REG_POWER_STATUS bits */
 #define TPS_POWER_STATUS_CONNECTION(x)  TPS_FIELD_GET(BIT(0), (x))
 #define TPS_POWER_STATUS_SOURCESINK(x)	TPS_FIELD_GET(BIT(1), (x))
diff --git a/drivers/usb/typec/tipd/trace.h b/drivers/usb/typec/tipd/trace.h
index 5d09d6f78930..12cad1bde7cc 100644
--- a/drivers/usb/typec/tipd/trace.h
+++ b/drivers/usb/typec/tipd/trace.h
@@ -67,6 +67,13 @@
 		{ TPS_REG_INT_USER_VID_ALT_MODE_ATTN_VDM,	"USER_VID_ALT_MODE_ATTN_VDM" }, \
 		{ TPS_REG_INT_USER_VID_ALT_MODE_OTHER_VDM,	"USER_VID_ALT_MODE_OTHER_VDM" })
 
+#define show_cd321x_irq_flags(flags) \
+	__print_flags_u64(flags, "|", \
+		{ APPLE_CD_REG_INT_PLUG_EVENT,			"PLUG_EVENT" }, \
+		{ APPLE_CD_REG_INT_POWER_STATUS_UPDATE,		"POWER_STATUS_UPDATE" }, \
+		{ APPLE_CD_REG_INT_DATA_STATUS_UPDATE,		"DATA_STATUS_UPDATE" }, \
+		{ APPLE_CD_REG_INT_STATUS_UPDATE,		"STATUS_UPDATE" })
+
 #define TPS6598X_STATUS_FLAGS_MASK (GENMASK(31, 0) ^ (TPS_STATUS_CONN_STATE_MASK | \
 						      TPS_STATUS_PP_5V0_SWITCH_MASK | \
 						      TPS_STATUS_PP_HV_SWITCH_MASK | \
@@ -207,6 +214,22 @@ TRACE_EVENT(tps6598x_irq,
 		      show_irq_flags(__entry->event2))
 );
 
+TRACE_EVENT(cd321x_irq,
+	    TP_PROTO(u64 event),
+	    TP_ARGS(event),
+
+	    TP_STRUCT__entry(
+			     __field(u64, event)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->event = event;
+			   ),
+
+	    TP_printk("event=%s",
+		      show_cd321x_irq_flags(__entry->event))
+);
+
 TRACE_EVENT(tps6598x_status,
 	    TP_PROTO(u32 status),
 	    TP_ARGS(status),
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 5ef5bd0e87cf..6aa28384f77f 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -128,8 +128,10 @@ static int ucsi_exec_command(struct ucsi *ucsi, u64 cmd)
 	if (ret)
 		return ret;
 
-	if (cci & UCSI_CCI_BUSY)
+	if (cci & UCSI_CCI_BUSY) {
+		ucsi->ops->async_write(ucsi, UCSI_CANCEL, NULL, 0);
 		return -EBUSY;
+	}
 
 	if (!(cci & UCSI_CCI_COMMAND_COMPLETE))
 		return -EIO;
@@ -189,6 +191,64 @@ int ucsi_resume(struct ucsi *ucsi)
 EXPORT_SYMBOL_GPL(ucsi_resume);
 /* -------------------------------------------------------------------------- */
 
+struct ucsi_work {
+	struct delayed_work work;
+	unsigned long delay;
+	unsigned int count;
+	struct ucsi_connector *con;
+	int (*cb)(struct ucsi_connector *);
+};
+
+static void ucsi_poll_worker(struct work_struct *work)
+{
+	struct ucsi_work *uwork = container_of(work, struct ucsi_work, work.work);
+	struct ucsi_connector *con = uwork->con;
+	int ret;
+
+	mutex_lock(&con->lock);
+
+	if (!con->partner) {
+		mutex_unlock(&con->lock);
+		kfree(uwork);
+		return;
+	}
+
+	ret = uwork->cb(con);
+
+	if (uwork->count-- && (ret == -EBUSY || ret == -ETIMEDOUT))
+		queue_delayed_work(con->wq, &uwork->work, uwork->delay);
+	else
+		kfree(uwork);
+
+	mutex_unlock(&con->lock);
+}
+
+static int ucsi_partner_task(struct ucsi_connector *con,
+			     int (*cb)(struct ucsi_connector *),
+			     int retries, unsigned long delay)
+{
+	struct ucsi_work *uwork;
+
+	if (!con->partner)
+		return 0;
+
+	uwork = kzalloc(sizeof(*uwork), GFP_KERNEL);
+	if (!uwork)
+		return -ENOMEM;
+
+	INIT_DELAYED_WORK(&uwork->work, ucsi_poll_worker);
+	uwork->count = retries;
+	uwork->delay = delay;
+	uwork->con = con;
+	uwork->cb = cb;
+
+	queue_delayed_work(con->wq, &uwork->work, delay);
+
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
 void ucsi_altmode_update_active(struct ucsi_connector *con)
 {
 	const struct typec_altmode *altmode = NULL;
@@ -435,6 +495,8 @@ static int ucsi_register_altmodes(struct ucsi_connector *con, u8 recipient)
 		command |= UCSI_GET_ALTMODE_CONNECTOR_NUMBER(con->num);
 		command |= UCSI_GET_ALTMODE_OFFSET(i);
 		len = ucsi_send_command(con->ucsi, command, alt, sizeof(alt));
+		if (len == -EBUSY)
+			continue;
 		if (len <= 0)
 			return len;
 
@@ -509,7 +571,7 @@ static int ucsi_get_pdos(struct ucsi_connector *con, int is_partner,
 	command |= UCSI_GET_PDOS_SRC_PDOS;
 	ret = ucsi_send_command(ucsi, command, pdos + offset,
 				num_pdos * sizeof(u32));
-	if (ret < 0)
+	if (ret < 0 && ret != -ETIMEDOUT)
 		dev_err(ucsi->dev, "UCSI_GET_PDOS failed (%d)\n", ret);
 	if (ret == 0 && offset == 0)
 		dev_warn(ucsi->dev, "UCSI_GET_PDOS returned 0 bytes\n");
@@ -517,26 +579,49 @@ static int ucsi_get_pdos(struct ucsi_connector *con, int is_partner,
 	return ret;
 }
 
-static void ucsi_get_src_pdos(struct ucsi_connector *con, int is_partner)
+static int ucsi_get_src_pdos(struct ucsi_connector *con)
 {
 	int ret;
 
 	/* UCSI max payload means only getting at most 4 PDOs at a time */
 	ret = ucsi_get_pdos(con, 1, con->src_pdos, 0, UCSI_MAX_PDOS);
 	if (ret < 0)
-		return;
+		return ret;
 
 	con->num_pdos = ret / sizeof(u32); /* number of bytes to 32-bit PDOs */
 	if (con->num_pdos < UCSI_MAX_PDOS)
-		return;
+		return 0;
 
 	/* get the remaining PDOs, if any */
 	ret = ucsi_get_pdos(con, 1, con->src_pdos, UCSI_MAX_PDOS,
 			    PDO_MAX_OBJECTS - UCSI_MAX_PDOS);
 	if (ret < 0)
-		return;
+		return ret;
 
 	con->num_pdos += ret / sizeof(u32);
+
+	ucsi_port_psy_changed(con);
+
+	return 0;
+}
+
+static int ucsi_check_altmodes(struct ucsi_connector *con)
+{
+	int ret;
+
+	ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP);
+	if (ret && ret != -ETIMEDOUT)
+		dev_err(con->ucsi->dev,
+			"con%d: failed to register partner alt modes (%d)\n",
+			con->num, ret);
+
+	/* Ignoring the errors in this case. */
+	if (con->partner_altmode[0]) {
+		ucsi_altmode_update_active(con);
+		return 0;
+	}
+
+	return ret;
 }
 
 static void ucsi_pwr_opmode_change(struct ucsi_connector *con)
@@ -545,7 +630,8 @@ static void ucsi_pwr_opmode_change(struct ucsi_connector *con)
 	case UCSI_CONSTAT_PWR_OPMODE_PD:
 		con->rdo = con->status.request_data_obj;
 		typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_PD);
-		ucsi_get_src_pdos(con, 1);
+		ucsi_partner_task(con, ucsi_get_src_pdos, 30, 0);
+		ucsi_partner_task(con, ucsi_check_altmodes, 30, 0);
 		break;
 	case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
 		con->rdo = 0;
@@ -614,9 +700,6 @@ static void ucsi_partner_change(struct ucsi_connector *con)
 	enum usb_role u_role = USB_ROLE_NONE;
 	int ret;
 
-	if (!con->partner)
-		return;
-
 	switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) {
 	case UCSI_CONSTAT_PARTNER_TYPE_UFP:
 	case UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP:
@@ -633,10 +716,6 @@ static void ucsi_partner_change(struct ucsi_connector *con)
 		break;
 	}
 
-	/* Complete pending data role swap */
-	if (!completion_done(&con->complete))
-		complete(&con->complete);
-
 	/* Only notify USB controller if partner supports USB data */
 	if (!(UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) & UCSI_CONSTAT_PARTNER_FLAG_USB))
 		u_role = USB_ROLE_NONE;
@@ -645,15 +724,31 @@ static void ucsi_partner_change(struct ucsi_connector *con)
 	if (ret)
 		dev_err(con->ucsi->dev, "con:%d: failed to set usb role:%d\n",
 			con->num, u_role);
+}
 
-	/* Can't rely on Partner Flags field. Always checking the alt modes. */
-	ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP);
-	if (ret)
-		dev_err(con->ucsi->dev,
-			"con%d: failed to register partner alternate modes\n",
-			con->num);
-	else
-		ucsi_altmode_update_active(con);
+static int ucsi_check_connection(struct ucsi_connector *con)
+{
+	u64 command;
+	int ret;
+
+	command = UCSI_GET_CONNECTOR_STATUS | UCSI_CONNECTOR_NUMBER(con->num);
+	ret = ucsi_send_command(con->ucsi, command, &con->status, sizeof(con->status));
+	if (ret < 0) {
+		dev_err(con->ucsi->dev, "GET_CONNECTOR_STATUS failed (%d)\n", ret);
+		return ret;
+	}
+
+	if (con->status.flags & UCSI_CONSTAT_CONNECTED) {
+		if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) ==
+		    UCSI_CONSTAT_PWR_OPMODE_PD)
+			ucsi_partner_task(con, ucsi_check_altmodes, 30, 0);
+	} else {
+		ucsi_partner_change(con);
+		ucsi_port_psy_changed(con);
+		ucsi_unregister_partner(con);
+	}
+
+	return 0;
 }
 
 static void ucsi_handle_connector_change(struct work_struct *work)
@@ -661,122 +756,24 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 	struct ucsi_connector *con = container_of(work, struct ucsi_connector,
 						  work);
 	struct ucsi *ucsi = con->ucsi;
-	struct ucsi_connector_status pre_ack_status;
-	struct ucsi_connector_status post_ack_status;
 	enum typec_role role;
-	enum usb_role u_role = USB_ROLE_NONE;
-	u16 inferred_changes;
-	u16 changed_flags;
 	u64 command;
 	int ret;
 
 	mutex_lock(&con->lock);
 
-	/*
-	 * Some/many PPMs have an issue where all fields in the change bitfield
-	 * are cleared when an ACK is send. This will causes any change
-	 * between GET_CONNECTOR_STATUS and ACK to be lost.
-	 *
-	 * We work around this by re-fetching the connector status afterwards.
-	 * We then infer any changes that we see have happened but that may not
-	 * be represented in the change bitfield.
-	 *
-	 * Also, even though we don't need to know the currently supported alt
-	 * modes, we run the GET_CAM_SUPPORTED command to ensure the PPM does
-	 * not get stuck in case it assumes we do.
-	 * Always do this, rather than relying on UCSI_CONSTAT_CAM_CHANGE to be
-	 * set in the change bitfield.
-	 *
-	 * We end up with the following actions:
-	 *  1. UCSI_GET_CONNECTOR_STATUS, store result, update unprocessed_changes
-	 *  2. UCSI_GET_CAM_SUPPORTED, discard result
-	 *  3. ACK connector change
-	 *  4. UCSI_GET_CONNECTOR_STATUS, store result
-	 *  5. Infere lost changes by comparing UCSI_GET_CONNECTOR_STATUS results
-	 *  6. If PPM reported a new change, then restart in order to ACK
-	 *  7. Process everything as usual.
-	 *
-	 * We may end up seeing a change twice, but we can only miss extremely
-	 * short transitional changes.
-	 */
-
-	/* 1. First UCSI_GET_CONNECTOR_STATUS */
 	command = UCSI_GET_CONNECTOR_STATUS | UCSI_CONNECTOR_NUMBER(con->num);
-	ret = ucsi_send_command(ucsi, command, &pre_ack_status,
-				sizeof(pre_ack_status));
-	if (ret < 0) {
-		dev_err(ucsi->dev, "%s: GET_CONNECTOR_STATUS failed (%d)\n",
-			__func__, ret);
-		goto out_unlock;
-	}
-	con->unprocessed_changes |= pre_ack_status.change;
-
-	/* 2. Run UCSI_GET_CAM_SUPPORTED and discard the result. */
-	command = UCSI_GET_CAM_SUPPORTED;
-	command |= UCSI_CONNECTOR_NUMBER(con->num);
-	ucsi_send_command(con->ucsi, command, NULL, 0);
-
-	/* 3. ACK connector change */
-	ret = ucsi_acknowledge_connector_change(ucsi);
-	clear_bit(EVENT_PENDING, &ucsi->flags);
-	if (ret) {
-		dev_err(ucsi->dev, "%s: ACK failed (%d)", __func__, ret);
-		goto out_unlock;
-	}
-
-	/* 4. Second UCSI_GET_CONNECTOR_STATUS */
-	command = UCSI_GET_CONNECTOR_STATUS | UCSI_CONNECTOR_NUMBER(con->num);
-	ret = ucsi_send_command(ucsi, command, &post_ack_status,
-				sizeof(post_ack_status));
+	ret = ucsi_send_command(ucsi, command, &con->status, sizeof(con->status));
 	if (ret < 0) {
 		dev_err(ucsi->dev, "%s: GET_CONNECTOR_STATUS failed (%d)\n",
 			__func__, ret);
 		goto out_unlock;
 	}
 
-	/* 5. Inferre any missing changes */
-	changed_flags = pre_ack_status.flags ^ post_ack_status.flags;
-	inferred_changes = 0;
-	if (UCSI_CONSTAT_PWR_OPMODE(changed_flags) != 0)
-		inferred_changes |= UCSI_CONSTAT_POWER_OPMODE_CHANGE;
-
-	if (changed_flags & UCSI_CONSTAT_CONNECTED)
-		inferred_changes |= UCSI_CONSTAT_CONNECT_CHANGE;
-
-	if (changed_flags & UCSI_CONSTAT_PWR_DIR)
-		inferred_changes |= UCSI_CONSTAT_POWER_DIR_CHANGE;
-
-	if (UCSI_CONSTAT_PARTNER_FLAGS(changed_flags) != 0)
-		inferred_changes |= UCSI_CONSTAT_PARTNER_CHANGE;
-
-	if (UCSI_CONSTAT_PARTNER_TYPE(changed_flags) != 0)
-		inferred_changes |= UCSI_CONSTAT_PARTNER_CHANGE;
-
-	/* Mask out anything that was correctly notified in the later call. */
-	inferred_changes &= ~post_ack_status.change;
-	if (inferred_changes)
-		dev_dbg(ucsi->dev, "%s: Inferred changes that would have been lost: 0x%04x\n",
-			__func__, inferred_changes);
-
-	con->unprocessed_changes |= inferred_changes;
-
-	/* 6. If PPM reported a new change, then restart in order to ACK */
-	if (post_ack_status.change)
-		goto out_unlock;
-
-	/* 7. Continue as if nothing happened */
-	con->status = post_ack_status;
-	con->status.change = con->unprocessed_changes;
-	con->unprocessed_changes = 0;
+	trace_ucsi_connector_change(con->num, &con->status);
 
 	role = !!(con->status.flags & UCSI_CONSTAT_PWR_DIR);
 
-	if (con->status.change & UCSI_CONSTAT_POWER_OPMODE_CHANGE ||
-	    con->status.change & UCSI_CONSTAT_POWER_LEVEL_CHANGE) {
-		ucsi_pwr_opmode_change(con);
-		ucsi_port_psy_changed(con);
-	}
-
 	if (con->status.change & UCSI_CONSTAT_POWER_DIR_CHANGE) {
 		typec_set_pwr_role(con->port, role);
 
@@ -787,54 +784,39 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 
 	if (con->status.change & UCSI_CONSTAT_CONNECT_CHANGE) {
 		typec_set_pwr_role(con->port, role);
+		ucsi_port_psy_changed(con);
+		ucsi_partner_change(con);
 
-		switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) {
-		case UCSI_CONSTAT_PARTNER_TYPE_UFP:
-		case UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP:
-			u_role = USB_ROLE_HOST;
-			fallthrough;
-		case UCSI_CONSTAT_PARTNER_TYPE_CABLE:
-			typec_set_data_role(con->port, TYPEC_HOST);
-			break;
-		case UCSI_CONSTAT_PARTNER_TYPE_DFP:
-			u_role = USB_ROLE_DEVICE;
-			typec_set_data_role(con->port, TYPEC_DEVICE);
-			break;
-		default:
-			break;
-		}
-
-		if (con->status.flags & UCSI_CONSTAT_CONNECTED)
+		if (con->status.flags & UCSI_CONSTAT_CONNECTED) {
 			ucsi_register_partner(con);
-		else
+			ucsi_partner_task(con, ucsi_check_connection, 1, HZ);
+		} else {
 			ucsi_unregister_partner(con);
+		}
+	}
 
-		ucsi_port_psy_changed(con);
+	if (con->status.change & UCSI_CONSTAT_POWER_OPMODE_CHANGE ||
+	    con->status.change & UCSI_CONSTAT_POWER_LEVEL_CHANGE)
+		ucsi_pwr_opmode_change(con);
 
-		/* Only notify USB controller if partner supports USB data */
-		if (!(UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) &
-				UCSI_CONSTAT_PARTNER_FLAG_USB))
-			u_role = USB_ROLE_NONE;
+	if (con->partner && con->status.change & UCSI_CONSTAT_PARTNER_CHANGE) {
+		ucsi_partner_change(con);
 
-		ret = usb_role_switch_set_role(con->usb_role_sw, u_role);
-		if (ret)
-			dev_err(ucsi->dev, "con:%d: failed to set usb role:%d\n",
-				con->num, u_role);
+		/* Complete pending data role swap */
+		if (!completion_done(&con->complete))
+			complete(&con->complete);
 	}
 
-	if (con->status.change & UCSI_CONSTAT_PARTNER_CHANGE)
-		ucsi_partner_change(con);
+	if (con->status.change & UCSI_CONSTAT_CAM_CHANGE)
+		ucsi_partner_task(con, ucsi_check_altmodes, 1, 0);
 
-	trace_ucsi_connector_change(con->num, &con->status);
+	clear_bit(EVENT_PENDING, &con->ucsi->flags);
 
-out_unlock:
-	if (test_and_clear_bit(EVENT_PENDING, &ucsi->flags)) {
-		schedule_work(&con->work);
-		mutex_unlock(&con->lock);
-		return;
-	}
+	ret = ucsi_acknowledge_connector_change(ucsi);
+	if (ret)
+		dev_err(ucsi->dev, "%s: ACK failed (%d)", __func__, ret);
 
-	clear_bit(EVENT_PROCESSING, &ucsi->flags);
+out_unlock:
 	mutex_unlock(&con->lock);
 }
 
@@ -852,9 +834,7 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num)
 		return;
 	}
 
-	set_bit(EVENT_PENDING, &ucsi->flags);
-
-	if (!test_and_set_bit(EVENT_PROCESSING, &ucsi->flags))
+	if (!test_and_set_bit(EVENT_PENDING, &ucsi->flags))
 		schedule_work(&con->work);
 }
 EXPORT_SYMBOL_GPL(ucsi_connector_change);
@@ -1041,8 +1021,18 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
 	enum typec_accessory *accessory = cap->accessory;
 	enum usb_role u_role = USB_ROLE_NONE;
 	u64 command;
+	char *name;
 	int ret;
 
+	name = kasprintf(GFP_KERNEL, "%s-con%d", dev_name(ucsi->dev), con->num);
+	if (!name)
+		return -ENOMEM;
+
+	con->wq = create_singlethread_workqueue(name);
+	kfree(name);
+	if (!con->wq)
+		return -ENOMEM;
+
 	INIT_WORK(&con->work, ucsi_handle_connector_change);
 	init_completion(&con->complete);
 	mutex_init(&con->lock);
@@ -1160,16 +1150,9 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
 		ret = 0;
 	}
 
-	if (con->partner) {
-		ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP);
-		if (ret) {
-			dev_err(ucsi->dev,
-				"con%d: failed to register alternate modes\n",
-				con->num);
-			ret = 0;
-		} else {
-			ucsi_altmode_update_active(con);
-		}
+	if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) == UCSI_CONSTAT_PWR_OPMODE_PD) {
+		ucsi_get_src_pdos(con);
+		ucsi_check_altmodes(con);
 	}
 
 	trace_ucsi_register_port(con->num, &con->status);
@@ -1178,6 +1161,12 @@ out:
 	fwnode_handle_put(cap->fwnode);
 out_unlock:
 	mutex_unlock(&con->lock);
+
+	if (ret && con->wq) {
+		destroy_workqueue(con->wq);
+		con->wq = NULL;
+	}
+
 	return ret;
 }
 
@@ -1248,6 +1237,8 @@ err_unregister:
 		ucsi_unregister_partner(con);
 		ucsi_unregister_altmodes(con, UCSI_RECIPIENT_CON);
 		ucsi_unregister_port_psy(con);
+		if (con->wq)
+			destroy_workqueue(con->wq);
 		typec_unregister_port(con->port);
 		con->port = NULL;
 	}
@@ -1370,6 +1361,8 @@ void ucsi_unregister(struct ucsi *ucsi)
 		ucsi_unregister_altmodes(&ucsi->connector[i],
 					 UCSI_RECIPIENT_CON);
 		ucsi_unregister_port_psy(&ucsi->connector[i]);
+		if (ucsi->connector[i].wq)
+			destroy_workqueue(ucsi->connector[i].wq);
 		typec_unregister_port(ucsi->connector[i].port);
 	}
 
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index cee666790907..280f1e1bda2c 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -300,7 +300,6 @@ struct ucsi {
 #define EVENT_PENDING	0
 #define COMMAND_PENDING	1
 #define ACK_PENDING	2
-#define EVENT_PROCESSING	3
 };
 
 #define UCSI_MAX_SVID		5
@@ -317,6 +316,7 @@ struct ucsi_connector {
 	struct mutex lock; /* port lock */
 	struct work_struct work;
 	struct completion complete;
+	struct workqueue_struct *wq;
 
 	struct typec_port *port;
 	struct typec_partner *partner;
@@ -326,7 +326,6 @@ struct ucsi_connector {
 
 	struct typec_capability typec_cap;
 
-	u16 unprocessed_changes;
 	struct ucsi_connector_status status;
 	struct ucsi_connector_capability cap;
 	struct power_supply *psy;
diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c
index 04976435ad73..6771f05e32c2 100644
--- a/drivers/usb/typec/ucsi/ucsi_acpi.c
+++ b/drivers/usb/typec/ucsi/ucsi_acpi.c
@@ -78,7 +78,7 @@ static int ucsi_acpi_sync_write(struct ucsi *ucsi, unsigned int offset,
 	if (ret)
 		goto out_clear_bit;
 
-	if (!wait_for_completion_timeout(&ua->complete, 60 * HZ))
+	if (!wait_for_completion_timeout(&ua->complete, HZ))
 		ret = -ETIMEDOUT;
 
 out_clear_bit:
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 2dc58766273a..d87deee3e26e 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -363,7 +363,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer,
 	int retval = 0;
 	struct urb *urb = NULL;
 	char *buf = NULL;
-	size_t writesize = min(count, (size_t)MAX_TRANSFER);
+	size_t writesize = min_t(size_t, count, MAX_TRANSFER);
 
 	dev = file->private_data;
author	Linus Torvalds <torvalds@linux-foundation.org>	2021-11-04 15:50:43 +0100
committer	Linus Torvalds <torvalds@linux-foundation.org>	2021-11-04 15:50:43 +0100
commit	048ff8629e117d8411a787559417c781bcd78d7e (patch)
tree	2cff07ed5c13a096d1c880139873870146cca74a /drivers/usb
parent	Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cl... (diff)
parent	usb: gadget: Mark USB_FSL_QE broken on 64-bit (diff)
download	linux-048ff8629e117d8411a787559417c781bcd78d7e.tar.xz linux-048ff8629e117d8411a787559417c781bcd78d7e.zip