Merge with rsync://fileserver/linux

Update to Linus latest

1 files changed, 684 insertions, 0 deletions

diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
new file mode 100644
index 000000000000..d28457e0c063
--- /dev/null
+++ b/drivers/video/arcfb.c
@@ -0,0 +1,684 @@
+/*
+ * linux/drivers/video/arcfb.c -- FB driver for Arc monochrome LCD board
+ *
+ * Copyright (C) 2005, Jaya Kumar <jayalk@intworks.biz>
+ * http://www.intworks.biz/arclcd
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This driver was written to be used with the Arc LCD board. Arc uses a
+ * set of KS108 chips that control individual 64x64 LCD matrices. The board
+ * can be paneled in a variety of setups such as 2x1=128x64, 4x4=256x256 and
+ * so on. The interface between the board and the host is TTL based GPIO. The
+ * GPIO requirements are 8 writable data lines and 4+n lines for control. On a
+ * GPIO-less system, the board can be tested by connecting the respective sigs
+ * up to a parallel port connector. The driver requires the IO addresses for
+ * data and control GPIO at load time. It is unable to probe for the
+ * existence of the LCD so it must be told at load time whether it should
+ * be enabled or not.
+ *
+ * Todo:
+ * - testing with 4x4
+ * - testing with interrupt hw
+ *
+ * General notes:
+ * - User must set tuhold. It's in microseconds. According to the 108 spec,
+ *   the hold time is supposed to be at least 1 microsecond.
+ * - User must set num_cols=x num_rows=y, eg: x=2 means 128
+ * - User must set arcfb_enable=1 to enable it
+ * - User must set dio_addr=0xIOADDR cio_addr=0xIOADDR
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/arcfb.h>
+
+#include <asm/uaccess.h>
+
+#define floor8(a) (a&(~0x07))
+#define floorXres(a,xres) (a&(~(xres - 1)))
+#define iceil8(a) (((int)((a+7)/8))*8)
+#define ceil64(a) (a|0x3F)
+#define ceilXres(a,xres) (a|(xres - 1))
+
+/* ks108 chipset specific defines and code */
+
+#define KS_SET_DPY_START_LINE 	0xC0
+#define KS_SET_PAGE_NUM 	0xB8
+#define KS_SET_X 		0x40
+#define KS_CEHI 		0x01
+#define KS_CELO 		0x00
+#define KS_SEL_CMD 		0x08
+#define KS_SEL_DATA 		0x00
+#define KS_DPY_ON 		0x3F
+#define KS_DPY_OFF 		0x3E
+#define KS_INTACK 		0x40
+#define KS_CLRINT		0x02
+
+struct arcfb_par {
+	unsigned long dio_addr;
+	unsigned long cio_addr;
+	unsigned long c2io_addr;
+	atomic_t ref_count;
+	unsigned char cslut[9];
+	struct fb_info *info;
+	unsigned int irq;
+	spinlock_t lock;
+};
+
+static struct fb_fix_screeninfo arcfb_fix __initdata = {
+	.id =		"arcfb",
+	.type =		FB_TYPE_PACKED_PIXELS,
+	.visual =	FB_VISUAL_MONO01,
+	.xpanstep =	0,
+	.ypanstep =	1,
+	.ywrapstep =	0,
+	.accel =	FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo arcfb_var __initdata = {
+	.xres		= 128,
+	.yres		= 64,
+	.xres_virtual	= 128,
+	.yres_virtual	= 64,
+	.bits_per_pixel	= 1,
+	.nonstd		= 1,
+};
+
+static unsigned long num_cols;
+static unsigned long num_rows;
+static unsigned long dio_addr;
+static unsigned long cio_addr;
+static unsigned long c2io_addr;
+static unsigned long splashval;
+static unsigned long tuhold;
+static unsigned int nosplash;
+static unsigned int arcfb_enable;
+static unsigned int irq;
+
+static DECLARE_WAIT_QUEUE_HEAD(arcfb_waitq);
+
+static void ks108_writeb_ctl(struct arcfb_par *par,
+				unsigned int chipindex, unsigned char value)
+{
+	unsigned char chipselval = par->cslut[chipindex];
+
+	outb(chipselval|KS_CEHI|KS_SEL_CMD, par->cio_addr);
+	outb(value, par->dio_addr);
+	udelay(tuhold);
+	outb(chipselval|KS_CELO|KS_SEL_CMD, par->cio_addr);
+}
+
+static void ks108_writeb_mainctl(struct arcfb_par *par, unsigned char value)
+{
+
+	outb(value, par->cio_addr);
+	udelay(tuhold);
+}
+
+static unsigned char ks108_readb_ctl2(struct arcfb_par *par)
+{
+	return inb(par->c2io_addr);
+}
+
+static void ks108_writeb_data(struct arcfb_par *par,
+				unsigned int chipindex, unsigned char value)
+{
+	unsigned char chipselval = par->cslut[chipindex];
+
+	outb(chipselval|KS_CEHI|KS_SEL_DATA, par->cio_addr);
+	outb(value, par->dio_addr);
+	udelay(tuhold);
+	outb(chipselval|KS_CELO|KS_SEL_DATA, par->cio_addr);
+}
+
+static void ks108_set_start_line(struct arcfb_par *par,
+				unsigned int chipindex, unsigned char y)
+{
+	ks108_writeb_ctl(par, chipindex, KS_SET_DPY_START_LINE|y);
+}
+
+static void ks108_set_yaddr(struct arcfb_par *par,
+				unsigned int chipindex, unsigned char y)
+{
+	ks108_writeb_ctl(par, chipindex, KS_SET_PAGE_NUM|y);
+}
+
+static void ks108_set_xaddr(struct arcfb_par *par,
+				unsigned int chipindex, unsigned char x)
+{
+	ks108_writeb_ctl(par, chipindex, KS_SET_X|x);
+}
+
+static void ks108_clear_lcd(struct arcfb_par *par, unsigned int chipindex)
+{
+	int i,j;
+
+	for (i = 0; i <= 8; i++) {
+		ks108_set_yaddr(par, chipindex, i);
+		ks108_set_xaddr(par, chipindex, 0);
+		for (j = 0; j < 64; j++) {
+			ks108_writeb_data(par, chipindex,
+				(unsigned char) splashval);
+		}
+	}
+}
+
+/* main arcfb functions */
+
+static int arcfb_open(struct fb_info *info, int user)
+{
+	struct arcfb_par *par = info->par;
+
+	atomic_inc(&par->ref_count);
+	return 0;
+}
+
+static int arcfb_release(struct fb_info *info, int user)
+{
+	struct arcfb_par *par = info->par;
+	int count = atomic_read(&par->ref_count);
+
+	if (!count)
+		return -EINVAL;
+	atomic_dec(&par->ref_count);
+	return 0;
+}
+
+static int arcfb_pan_display(struct fb_var_screeninfo *var,
+				struct fb_info *info)
+{
+	int i;
+	struct arcfb_par *par = info->par;
+
+	if ((var->vmode & FB_VMODE_YWRAP) && (var->yoffset < 64)
+		&& (info->var.yres <= 64)) {
+		for (i = 0; i < num_cols; i++) {
+			ks108_set_start_line(par, i, var->yoffset);
+		}
+		info->var.yoffset = var->yoffset;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static irqreturn_t arcfb_interrupt(int vec, void *dev_instance,
+		struct pt_regs *regs)
+{
+	struct fb_info *info = dev_instance;
+	unsigned char ctl2status;
+	struct arcfb_par *par = info->par;
+
+	ctl2status = ks108_readb_ctl2(par);
+
+	if (!(ctl2status & KS_INTACK)) /* not arc generated interrupt */
+		return IRQ_NONE;
+
+	ks108_writeb_mainctl(par, KS_CLRINT);
+
+	spin_lock(&par->lock);
+        if (waitqueue_active(&arcfb_waitq)) {
+                wake_up(&arcfb_waitq);
+        }
+	spin_unlock(&par->lock);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * here we handle a specific page on the lcd. the complexity comes from
+ * the fact that the fb is laidout in 8xX vertical columns. we extract
+ * each write of 8 vertical pixels. then we shift out as we move along
+ * X. That's what rightshift does. bitmask selects the desired input bit.
+ */
+static void arcfb_lcd_update_page(struct arcfb_par *par, unsigned int upper,
+		unsigned int left, unsigned int right, unsigned int distance)
+{
+	unsigned char *src;
+	unsigned int xindex, yindex, chipindex, linesize;
+	int i, count;
+	unsigned char val;
+	unsigned char bitmask, rightshift;
+
+	xindex = left >> 6;
+	yindex = upper >> 6;
+	chipindex = (xindex + (yindex*num_cols));
+
+	ks108_set_yaddr(par, chipindex, upper/8);
+
+	linesize = par->info->var.xres/8;
+	src = par->info->screen_base + (left/8) + (upper * linesize);
+	ks108_set_xaddr(par, chipindex, left);
+
+	bitmask=1;
+	rightshift=0;
+	while (left <= right) {
+		val = 0;
+		for (i = 0; i < 8; i++) {
+			if ( i > rightshift) {
+				val |= (*(src + (i*linesize)) & bitmask)
+						<< (i - rightshift);
+			} else {
+				val |= (*(src + (i*linesize)) & bitmask)
+						 >> (rightshift - i);
+			}
+		}
+		ks108_writeb_data(par, chipindex, val);
+		left++;
+		count++;
+		if (bitmask == 0x80) {
+			bitmask = 1;
+			src++;
+			rightshift=0;
+		} else {
+			bitmask <<= 1;
+			rightshift++;
+		}
+	}
+}
+
+/*
+ * here we handle the entire vertical page of the update. we write across
+ * lcd chips. update_page uses the upper/left values to decide which
+ * chip to select for the right. upper is needed for setting the page
+ * desired for the write.
+ */
+static void arcfb_lcd_update_vert(struct arcfb_par *par, unsigned int top,
+		unsigned int bottom, unsigned int left, unsigned int right)
+{
+	unsigned int distance, upper, lower;
+
+	distance = (bottom - top) + 1;
+	upper = top;
+	lower = top + 7;
+
+	while (distance > 0) {
+		distance -= 8;
+		arcfb_lcd_update_page(par, upper, left, right, 8);
+		upper = lower + 1;
+		lower = upper + 7;
+	}
+}
+
+/*
+ * here we handle horizontal blocks for the update. update_vert will
+ * handle spaning multiple pages. we break out each horizontal
+ * block in to individual blocks no taller than 64 pixels.
+ */
+static void arcfb_lcd_update_horiz(struct arcfb_par *par, unsigned int left,
+			unsigned int right, unsigned int top, unsigned int h)
+{
+	unsigned int distance, upper, lower;
+
+	distance = h;
+	upper = floor8(top);
+	lower = min(upper + distance - 1, ceil64(upper));
+
+	while (distance > 0) {
+		distance -= ((lower - upper) + 1 );
+		arcfb_lcd_update_vert(par, upper, lower, left, right);
+		upper = lower + 1;
+		lower = min(upper + distance - 1, ceil64(upper));
+	}
+}
+
+/*
+ * here we start the process of spliting out the fb update into
+ * individual blocks of pixels. we end up spliting into 64x64 blocks
+ * and finally down to 64x8 pages.
+ */
+static void arcfb_lcd_update(struct arcfb_par *par, unsigned int dx,
+			unsigned int dy, unsigned int w, unsigned int h)
+{
+	unsigned int left, right, distance, y;
+
+	/* align the request first */
+	y = floor8(dy);
+	h += dy - y;
+	h = iceil8(h);
+
+	distance = w;
+	left = dx;
+	right = min(left + w - 1, ceil64(left));
+
+	while (distance > 0) {
+		arcfb_lcd_update_horiz(par, left, right, y, h);
+		distance -= ((right - left) + 1);
+		left = right + 1;
+		right = min(left + distance - 1, ceil64(left));
+	}
+}
+
+void arcfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+	struct arcfb_par *par = info->par;
+
+	cfb_fillrect(info, rect);
+
+	/* update the physical lcd */
+	arcfb_lcd_update(par, rect->dx, rect->dy, rect->width, rect->height);
+}
+
+void arcfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+	struct arcfb_par *par = info->par;
+
+	cfb_copyarea(info, area);
+
+	/* update the physical lcd */
+	arcfb_lcd_update(par, area->dx, area->dy, area->width, area->height);
+}
+
+void arcfb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+	struct arcfb_par *par = info->par;
+
+	cfb_imageblit(info, image);
+
+	/* update the physical lcd */
+	arcfb_lcd_update(par, image->dx, image->dy, image->width,
+				image->height);
+}
+
+static int arcfb_ioctl(struct inode *inode, struct file *file,
+			  unsigned int cmd, unsigned long arg,
+			  struct fb_info *info)
+{
+	void __user *argp = (void __user *)arg;
+	struct arcfb_par *par = info->par;
+	unsigned long flags;
+
+	switch (cmd) {
+		case FBIO_WAITEVENT:
+		{
+			DEFINE_WAIT(wait);
+			/* illegal to wait on arc if no irq will occur */
+			if (!par->irq)
+				return -EINVAL;
+
+			/* wait until the Arc has generated an interrupt
+			 * which will wake us up */
+			spin_lock_irqsave(&par->lock, flags);
+			prepare_to_wait(&arcfb_waitq, &wait,
+					TASK_INTERRUPTIBLE);
+			spin_unlock_irqrestore(&par->lock, flags);
+			schedule();
+			finish_wait(&arcfb_waitq, &wait);
+		}
+		case FBIO_GETCONTROL2:
+		{
+			unsigned char ctl2;
+
+			ctl2 = ks108_readb_ctl2(info->par);
+			if (copy_to_user(argp, &ctl2, sizeof(ctl2)))
+				return -EFAULT;
+			return 0;
+		}
+		default:
+			return -EINVAL;
+	}
+}
+
+/*
+ * this is the access path from userspace. they can seek and write to
+ * the fb. it's inefficient for them to do anything less than 64*8
+ * writes since we update the lcd in each write() anyway.
+ */
+static ssize_t arcfb_write(struct file *file, const char *buf, size_t count,
+				loff_t *ppos)
+{
+	/* modded from epson 1355 */
+
+	struct inode *inode;
+	int fbidx;
+	struct fb_info *info;
+	unsigned long p;
+	int err=-EINVAL;
+	unsigned int fbmemlength,x,y,w,h, bitppos, startpos, endpos, bitcount;
+	struct arcfb_par *par;
+	unsigned int xres;
+
+	p = *ppos;
+	inode = file->f_dentry->d_inode;
+	fbidx = iminor(inode);
+	info = registered_fb[fbidx];
+	par = info->par;
+
+	if (!info || !info->screen_base)
+		return -ENODEV;
+
+	xres = info->var.xres;
+	fbmemlength = (xres * info->var.yres)/8;
+
+	if (p > fbmemlength)
+		return -ENOSPC;
+
+	err = 0;
+	if ((count + p) > fbmemlength) {
+		count = fbmemlength - p;
+		err = -ENOSPC;
+	}
+
+	if (count) {
+		char *base_addr;
+
+		base_addr = info->screen_base;
+		count -= copy_from_user(base_addr + p, buf, count);
+		*ppos += count;
+		err = -EFAULT;
+	}
+
+
+	bitppos = p*8;
+	startpos = floorXres(bitppos, xres);
+	endpos = ceilXres((bitppos + (count*8)), xres);
+	bitcount = endpos - startpos;
+
+	x = startpos % xres;
+	y = startpos / xres;
+	w = xres;
+	h = bitcount / xres;
+	arcfb_lcd_update(par, x, y, w, h);
+
+	if (count)
+		return count;
+	return err;
+}
+
+static void arcfb_platform_release(struct device *device)
+{
+}
+
+static struct fb_ops arcfb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_open	= arcfb_open,
+	.fb_write	= arcfb_write,
+	.fb_release	= arcfb_release,
+	.fb_pan_display	= arcfb_pan_display,
+	.fb_fillrect	= arcfb_fillrect,
+	.fb_copyarea	= arcfb_copyarea,
+	.fb_imageblit	= arcfb_imageblit,
+	.fb_cursor	= soft_cursor,
+	.fb_ioctl 	= arcfb_ioctl,
+};
+
+static int __init arcfb_probe(struct device *device)
+{
+	struct platform_device *dev = to_platform_device(device);
+	struct fb_info *info;
+	int retval = -ENOMEM;
+	int videomemorysize;
+	unsigned char *videomemory;
+	struct arcfb_par *par;
+	int i;
+
+	videomemorysize = (((64*64)*num_cols)*num_rows)/8;
+
+	/* We need a flat backing store for the Arc's
+	   less-flat actual paged framebuffer */
+	if (!(videomemory = vmalloc(videomemorysize)))
+		return retval;
+
+	memset(videomemory, 0, videomemorysize);
+
+	info = framebuffer_alloc(sizeof(struct arcfb_par), &dev->dev);
+	if (!info)
+		goto err;
+
+	info->screen_base = (char __iomem *)videomemory;
+	info->fbops = &arcfb_ops;
+
+	info->var = arcfb_var;
+	info->fix = arcfb_fix;
+	par = info->par;
+	par->info = info;
+
+	if (!dio_addr || !cio_addr || !c2io_addr) {
+		printk(KERN_WARNING "no IO addresses supplied\n");
+		goto err1;
+	}
+	par->dio_addr = dio_addr;
+	par->cio_addr = cio_addr;
+	par->c2io_addr = c2io_addr;
+	par->cslut[0] = 0x00;
+	par->cslut[1] = 0x06;
+	info->flags = FBINFO_FLAG_DEFAULT;
+	spin_lock_init(&par->lock);
+	retval = register_framebuffer(info);
+	if (retval < 0)
+		goto err1;
+	dev_set_drvdata(&dev->dev, info);
+	if (irq) {
+		par->irq = irq;
+		if (request_irq(par->irq, &arcfb_interrupt, SA_SHIRQ,
+				"arcfb", info)) {
+			printk(KERN_INFO
+				"arcfb: Failed req IRQ %d\n", par->irq);
+			goto err1;
+		}
+	}
+	printk(KERN_INFO
+	       "fb%d: Arc frame buffer device, using %dK of video memory\n",
+	       info->node, videomemorysize >> 10);
+
+	/* this inits the lcd but doesn't clear dirty pixels */
+	for (i = 0; i < num_cols * num_rows; i++) {
+		ks108_writeb_ctl(par, i, KS_DPY_OFF);
+		ks108_set_start_line(par, i, 0);
+		ks108_set_yaddr(par, i, 0);
+		ks108_set_xaddr(par, i, 0);
+		ks108_writeb_ctl(par, i, KS_DPY_ON);
+	}
+
+	/* if we were told to splash the screen, we just clear it */
+	if (!nosplash) {
+		for (i = 0; i < num_cols * num_rows; i++) {
+			printk(KERN_INFO "fb%d: splashing lcd %d\n",
+				info->node, i);
+			ks108_set_start_line(par, i, 0);
+			ks108_clear_lcd(par, i);
+		}
+	}
+
+	return 0;
+err1:
+	framebuffer_release(info);
+err:
+	vfree(videomemory);
+	return retval;
+}
+
+static int arcfb_remove(struct device *device)
+{
+	struct fb_info *info = dev_get_drvdata(device);
+
+	if (info) {
+		unregister_framebuffer(info);
+		vfree(info->screen_base);
+		framebuffer_release(info);
+	}
+	return 0;
+}
+
+static struct device_driver arcfb_driver = {
+	.name	= "arcfb",
+	.bus	= &platform_bus_type,
+	.probe	= arcfb_probe,
+	.remove = arcfb_remove,
+};
+
+static struct platform_device arcfb_device = {
+	.name	= "arcfb",
+	.id	= 0,
+	.dev	= {
+		.release = arcfb_platform_release,
+	}
+};
+
+static int __init arcfb_init(void)
+{
+	int ret;
+
+	if (!arcfb_enable)
+		return -ENXIO;
+
+	ret = driver_register(&arcfb_driver);
+	if (!ret) {
+		ret = platform_device_register(&arcfb_device);
+		if (ret)
+			driver_unregister(&arcfb_driver);
+	}
+	return ret;
+
+}
+
+static void __exit arcfb_exit(void)
+{
+	platform_device_unregister(&arcfb_device);
+	driver_unregister(&arcfb_driver);
+}
+
+module_param(num_cols, ulong, 0);
+MODULE_PARM_DESC(num_cols, "Num horiz panels, eg: 2 = 128 bit wide");
+module_param(num_rows, ulong, 0);
+MODULE_PARM_DESC(num_rows, "Num vert panels, eg: 1 = 64 bit high");
+module_param(nosplash, uint, 0);
+MODULE_PARM_DESC(nosplash, "Disable doing the splash screen");
+module_param(arcfb_enable, uint, 0);
+MODULE_PARM_DESC(arcfb_enable, "Enable communication with Arc board");
+module_param(dio_addr, ulong, 0);
+MODULE_PARM_DESC(dio_addr, "IO address for data, eg: 0x480");
+module_param(cio_addr, ulong, 0);
+MODULE_PARM_DESC(cio_addr, "IO address for control, eg: 0x400");
+module_param(c2io_addr, ulong, 0);
+MODULE_PARM_DESC(c2io_addr, "IO address for secondary control, eg: 0x408");
+module_param(splashval, ulong, 0);
+MODULE_PARM_DESC(splashval, "Splash pattern: 0xFF is black, 0x00 is green");
+module_param(tuhold, ulong, 0);
+MODULE_PARM_DESC(tuhold, "Time to hold between strobing data to Arc board");
+module_param(irq, uint, 0);
+MODULE_PARM_DESC(irq, "IRQ for the Arc board");
+
+module_init(arcfb_init);
+module_exit(arcfb_exit);
+
+MODULE_DESCRIPTION("fbdev driver for Arc monochrome LCD board");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
+