Merge ../linux-2.6

1 files changed, 156 insertions, 0 deletions

diff --git a/drivers/video/geode/display_gx.c b/drivers/video/geode/display_gx.c
new file mode 100644
index 000000000000..825c3405f5c2
--- /dev/null
+++ b/drivers/video/geode/display_gx.c
@@ -0,0 +1,156 @@
+/*
+ * Geode GX display controller.
+ *
+ *   Copyright (C) 2005 Arcom Control Systems Ltd.
+ *
+ *   Portions from AMD's original 2.4 driver:
+ *     Copyright (C) 2004 Advanced Micro Devices, Inc.
+ *
+ *   This program is free software; you can redistribute it and/or modify it
+ *   under the terms of the GNU General Public License as published by * the
+ *   Free Software Foundation; either version 2 of the License, or * (at your
+ *   option) any later version.
+ */
+#include <linux/spinlock.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/div64.h>
+#include <asm/delay.h>
+
+#include "geodefb.h"
+#include "display_gx.h"
+
+int gx_frame_buffer_size(void)
+{
+	/* Assuming 16 MiB. */
+	return 16*1024*1024;
+}
+
+int gx_line_delta(int xres, int bpp)
+{
+	/* Must be a multiple of 8 bytes. */
+	return (xres * (bpp >> 3) + 7) & ~0x7;
+}
+
+static void gx_set_mode(struct fb_info *info)
+{
+	struct geodefb_par *par = info->par;
+	u32 gcfg, dcfg;
+	int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
+	int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
+
+	/* Unlock the display controller registers. */
+	readl(par->dc_regs + DC_UNLOCK);
+	writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
+
+	gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
+	dcfg = readl(par->dc_regs + DC_DISPLAY_CFG);
+
+	/* Disable the timing generator. */
+	dcfg &= ~(DC_DCFG_TGEN);
+	writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
+
+	/* Wait for pending memory requests before disabling the FIFO load. */
+	udelay(100);
+
+	/* Disable FIFO load and compression. */
+	gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
+	writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+
+	/* Setup DCLK and its divisor. */
+	par->vid_ops->set_dclk(info);
+
+	/*
+	 * Setup new mode.
+	 */
+
+	/* Clear all unused feature bits. */
+	gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE;
+	dcfg = 0;
+
+	/* Set FIFO priority (default 6/5) and enable. */
+	/* FIXME: increase fifo priority for 1280x1024 and higher modes? */
+	gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
+
+	/* Framebuffer start offset. */
+	writel(0, par->dc_regs + DC_FB_ST_OFFSET);
+
+	/* Line delta and line buffer length. */
+	writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
+	writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
+	       par->dc_regs + DC_LINE_SIZE);
+
+	/* Enable graphics and video data and unmask address lines. */
+	dcfg |= DC_DCFG_GDEN | DC_DCFG_VDEN | DC_DCFG_A20M | DC_DCFG_A18M;
+
+	/* Set pixel format. */
+	switch (info->var.bits_per_pixel) {
+	case 8:
+		dcfg |= DC_DCFG_DISP_MODE_8BPP;
+		break;
+	case 16:
+		dcfg |= DC_DCFG_DISP_MODE_16BPP;
+		dcfg |= DC_DCFG_16BPP_MODE_565;
+		break;
+	case 32:
+		dcfg |= DC_DCFG_DISP_MODE_24BPP;
+		dcfg |= DC_DCFG_PALB;
+		break;
+	}
+
+	/* Enable timing generator. */
+	dcfg |= DC_DCFG_TGEN;
+
+	/* Horizontal and vertical timings. */
+	hactive = info->var.xres;
+	hblankstart = hactive;
+	hsyncstart = hblankstart + info->var.right_margin;
+	hsyncend =  hsyncstart + info->var.hsync_len;
+	hblankend = hsyncend + info->var.left_margin;
+	htotal = hblankend;
+
+	vactive = info->var.yres;
+	vblankstart = vactive;
+	vsyncstart = vblankstart + info->var.lower_margin;
+	vsyncend =  vsyncstart + info->var.vsync_len;
+	vblankend = vsyncend + info->var.upper_margin;
+	vtotal = vblankend;
+
+	writel((hactive - 1)     | ((htotal - 1) << 16),    par->dc_regs + DC_H_ACTIVE_TIMING);
+	writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
+	writel((hsyncstart - 1)  | ((hsyncend - 1) << 16),  par->dc_regs + DC_H_SYNC_TIMING);
+
+	writel((vactive - 1)     | ((vtotal - 1) << 16),    par->dc_regs + DC_V_ACTIVE_TIMING);
+	writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
+	writel((vsyncstart - 1)  | ((vsyncend - 1) << 16),  par->dc_regs + DC_V_SYNC_TIMING);
+
+	/* Write final register values. */
+	writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
+	writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+
+	par->vid_ops->configure_display(info);
+
+	/* Relock display controller registers */
+	writel(0, par->dc_regs + DC_UNLOCK);
+}
+
+static void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno,
+				   unsigned red, unsigned green, unsigned blue)
+{
+	struct geodefb_par *par = info->par;
+	int val;
+
+	/* Hardware palette is in RGB 8-8-8 format. */
+	val  = (red   << 8) & 0xff0000;
+	val |= (green)      & 0x00ff00;
+	val |= (blue  >> 8) & 0x0000ff;
+
+	writel(regno, par->dc_regs + DC_PAL_ADDRESS);
+	writel(val, par->dc_regs + DC_PAL_DATA);
+}
+
+struct geode_dc_ops gx_dc_ops = {
+	.set_mode	 = gx_set_mode,
+	.set_palette_reg = gx_set_hw_palette_reg,
+};