OMAPFB: Remove OMAP2/3 support from old omapfb driver

Old omapfb driver (drivers/video/omap/) is no longer used for OMAP2+
devices, and thus we can remove OMAP2+ support from it and make it an
OMAP1 omapfb driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

1 files changed, 0 insertions, 598 deletions

diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
deleted file mode 100644
index 2c1a3402bef0..000000000000
--- a/drivers/video/omap/rfbi.c
+++ /dev/null
@@ -1,598 +0,0 @@
-/*
- * OMAP2 Remote Frame Buffer Interface support
- *
- * Copyright (C) 2005 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
- *	   Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include "omapfb.h"
-#include "dispc.h"
-
-/* To work around an RFBI transfer rate limitation */
-#define OMAP_RFBI_RATE_LIMIT	1
-
-#define RFBI_BASE		0x48050800
-#define RFBI_REVISION		0x0000
-#define RFBI_SYSCONFIG		0x0010
-#define RFBI_SYSSTATUS		0x0014
-#define RFBI_CONTROL		0x0040
-#define RFBI_PIXEL_CNT		0x0044
-#define RFBI_LINE_NUMBER	0x0048
-#define RFBI_CMD		0x004c
-#define RFBI_PARAM		0x0050
-#define RFBI_DATA		0x0054
-#define RFBI_READ		0x0058
-#define RFBI_STATUS		0x005c
-#define RFBI_CONFIG0		0x0060
-#define RFBI_ONOFF_TIME0	0x0064
-#define RFBI_CYCLE_TIME0	0x0068
-#define RFBI_DATA_CYCLE1_0	0x006c
-#define RFBI_DATA_CYCLE2_0	0x0070
-#define RFBI_DATA_CYCLE3_0	0x0074
-#define RFBI_VSYNC_WIDTH	0x0090
-#define RFBI_HSYNC_WIDTH	0x0094
-
-#define DISPC_BASE		0x48050400
-#define DISPC_CONTROL		0x0040
-#define DISPC_IRQ_FRAMEMASK     0x0001
-
-static struct {
-	void __iomem	*base;
-	void		(*lcdc_callback)(void *data);
-	void		*lcdc_callback_data;
-	unsigned long	l4_khz;
-	int		bits_per_cycle;
-	struct omapfb_device *fbdev;
-	struct clk	*dss_ick;
-	struct clk	*dss1_fck;
-	unsigned	tearsync_pin_cnt;
-	unsigned	tearsync_mode;
-} rfbi;
-
-static inline void rfbi_write_reg(int idx, u32 val)
-{
-	__raw_writel(val, rfbi.base + idx);
-}
-
-static inline u32 rfbi_read_reg(int idx)
-{
-	return __raw_readl(rfbi.base + idx);
-}
-
-static int rfbi_get_clocks(void)
-{
-	rfbi.dss_ick = clk_get(&rfbi.fbdev->dssdev->dev, "ick");
-	if (IS_ERR(rfbi.dss_ick)) {
-		dev_err(rfbi.fbdev->dev, "can't get ick\n");
-		return PTR_ERR(rfbi.dss_ick);
-	}
-
-	rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "fck");
-	if (IS_ERR(rfbi.dss1_fck)) {
-		dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
-		clk_put(rfbi.dss_ick);
-		return PTR_ERR(rfbi.dss1_fck);
-	}
-
-	return 0;
-}
-
-static void rfbi_put_clocks(void)
-{
-	clk_put(rfbi.dss1_fck);
-	clk_put(rfbi.dss_ick);
-}
-
-static void rfbi_enable_clocks(int enable)
-{
-	if (enable) {
-		clk_enable(rfbi.dss_ick);
-		clk_enable(rfbi.dss1_fck);
-	} else {
-		clk_disable(rfbi.dss1_fck);
-		clk_disable(rfbi.dss_ick);
-	}
-}
-
-
-#ifdef VERBOSE
-static void rfbi_print_timings(void)
-{
-	u32 l;
-	u32 time;
-
-	l = rfbi_read_reg(RFBI_CONFIG0);
-	time = 1000000000 / rfbi.l4_khz;
-	if (l & (1 << 4))
-		time *= 2;
-
-	dev_dbg(rfbi.fbdev->dev, "Tick time %u ps\n", time);
-	l = rfbi_read_reg(RFBI_ONOFF_TIME0);
-	dev_dbg(rfbi.fbdev->dev,
-		"CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, "
-		"REONTIME %d, REOFFTIME %d\n",
-		l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f,
-		(l >> 20) & 0x0f, (l >> 24) & 0x3f);
-
-	l = rfbi_read_reg(RFBI_CYCLE_TIME0);
-	dev_dbg(rfbi.fbdev->dev,
-		"WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, "
-		"ACCESSTIME %d\n",
-		(l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f,
-		(l >> 22) & 0x3f);
-}
-#else
-static void rfbi_print_timings(void) {}
-#endif
-
-static void rfbi_set_timings(const struct extif_timings *t)
-{
-	u32 l;
-
-	BUG_ON(!t->converted);
-
-	rfbi_enable_clocks(1);
-	rfbi_write_reg(RFBI_ONOFF_TIME0, t->tim[0]);
-	rfbi_write_reg(RFBI_CYCLE_TIME0, t->tim[1]);
-
-	l = rfbi_read_reg(RFBI_CONFIG0);
-	l &= ~(1 << 4);
-	l |= (t->tim[2] ? 1 : 0) << 4;
-	rfbi_write_reg(RFBI_CONFIG0, l);
-
-	rfbi_print_timings();
-	rfbi_enable_clocks(0);
-}
-
-static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div)
-{
-	*clk_period = 1000000000 / rfbi.l4_khz;
-	*max_clk_div = 2;
-}
-
-static int ps_to_rfbi_ticks(int time, int div)
-{
-	unsigned long tick_ps;
-	int ret;
-
-	/* Calculate in picosecs to yield more exact results */
-	tick_ps = 1000000000 / (rfbi.l4_khz) * div;
-
-	ret = (time + tick_ps - 1) / tick_ps;
-
-	return ret;
-}
-
-#ifdef OMAP_RFBI_RATE_LIMIT
-static unsigned long rfbi_get_max_tx_rate(void)
-{
-	unsigned long	l4_rate, dss1_rate;
-	int		min_l4_ticks = 0;
-	int		i;
-
-	/* According to TI this can't be calculated so make the
-	 * adjustments for a couple of known frequencies and warn for
-	 * others.
-	 */
-	static const struct {
-		unsigned long l4_clk;		/* HZ */
-		unsigned long dss1_clk;		/* HZ */
-		unsigned long min_l4_ticks;
-	} ftab[] = {
-		{ 55,	132,	7, },		/* 7.86 MPix/s */
-		{ 110,	110,	12, },		/* 9.16 MPix/s */
-		{ 110,	132,	10, },		/* 11   Mpix/s */
-		{ 120,	120,	10, },		/* 12   Mpix/s */
-		{ 133,	133,	10, },		/* 13.3 Mpix/s */
-	};
-
-	l4_rate = rfbi.l4_khz / 1000;
-	dss1_rate = clk_get_rate(rfbi.dss1_fck) / 1000000;
-
-	for (i = 0; i < ARRAY_SIZE(ftab); i++) {
-		/* Use a window instead of an exact match, to account
-		 * for different DPLL multiplier / divider pairs.
-		 */
-		if (abs(ftab[i].l4_clk - l4_rate) < 3 &&
-		    abs(ftab[i].dss1_clk - dss1_rate) < 3) {
-			min_l4_ticks = ftab[i].min_l4_ticks;
-			break;
-		}
-	}
-	if (i == ARRAY_SIZE(ftab)) {
-		/* Can't be sure, return anyway the maximum not
-		 * rate-limited. This might cause a problem only for the
-		 * tearing synchronisation.
-		 */
-		dev_err(rfbi.fbdev->dev,
-			"can't determine maximum RFBI transfer rate\n");
-		return rfbi.l4_khz * 1000;
-	}
-	return rfbi.l4_khz * 1000 / min_l4_ticks;
-}
-#else
-static int rfbi_get_max_tx_rate(void)
-{
-	return rfbi.l4_khz * 1000;
-}
-#endif
-
-
-static int rfbi_convert_timings(struct extif_timings *t)
-{
-	u32 l;
-	int reon, reoff, weon, weoff, cson, csoff, cs_pulse;
-	int actim, recyc, wecyc;
-	int div = t->clk_div;
-
-	if (div <= 0 || div > 2)
-		return -1;
-
-	/* Make sure that after conversion it still holds that:
-	 * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff,
-	 * csoff > cson, csoff >= max(weoff, reoff), actim > reon
-	 */
-	weon = ps_to_rfbi_ticks(t->we_on_time, div);
-	weoff = ps_to_rfbi_ticks(t->we_off_time, div);
-	if (weoff <= weon)
-		weoff = weon + 1;
-	if (weon > 0x0f)
-		return -1;
-	if (weoff > 0x3f)
-		return -1;
-
-	reon = ps_to_rfbi_ticks(t->re_on_time, div);
-	reoff = ps_to_rfbi_ticks(t->re_off_time, div);
-	if (reoff <= reon)
-		reoff = reon + 1;
-	if (reon > 0x0f)
-		return -1;
-	if (reoff > 0x3f)
-		return -1;
-
-	cson = ps_to_rfbi_ticks(t->cs_on_time, div);
-	csoff = ps_to_rfbi_ticks(t->cs_off_time, div);
-	if (csoff <= cson)
-		csoff = cson + 1;
-	if (csoff < max(weoff, reoff))
-		csoff = max(weoff, reoff);
-	if (cson > 0x0f)
-		return -1;
-	if (csoff > 0x3f)
-		return -1;
-
-	l =  cson;
-	l |= csoff << 4;
-	l |= weon  << 10;
-	l |= weoff << 14;
-	l |= reon  << 20;
-	l |= reoff << 24;
-
-	t->tim[0] = l;
-
-	actim = ps_to_rfbi_ticks(t->access_time, div);
-	if (actim <= reon)
-		actim = reon + 1;
-	if (actim > 0x3f)
-		return -1;
-
-	wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div);
-	if (wecyc < weoff)
-		wecyc = weoff;
-	if (wecyc > 0x3f)
-		return -1;
-
-	recyc = ps_to_rfbi_ticks(t->re_cycle_time, div);
-	if (recyc < reoff)
-		recyc = reoff;
-	if (recyc > 0x3f)
-		return -1;
-
-	cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div);
-	if (cs_pulse > 0x3f)
-		return -1;
-
-	l =  wecyc;
-	l |= recyc    << 6;
-	l |= cs_pulse << 12;
-	l |= actim    << 22;
-
-	t->tim[1] = l;
-
-	t->tim[2] = div - 1;
-
-	t->converted = 1;
-
-	return 0;
-}
-
-static int rfbi_setup_tearsync(unsigned pin_cnt,
-			       unsigned hs_pulse_time, unsigned vs_pulse_time,
-			       int hs_pol_inv, int vs_pol_inv, int extif_div)
-{
-	int hs, vs;
-	int min;
-	u32 l;
-
-	if (pin_cnt != 1 && pin_cnt != 2)
-		return -EINVAL;
-
-	hs = ps_to_rfbi_ticks(hs_pulse_time, 1);
-	vs = ps_to_rfbi_ticks(vs_pulse_time, 1);
-	if (hs < 2)
-		return -EDOM;
-	if (pin_cnt == 2)
-		min = 2;
-	else
-		min = 4;
-	if (vs < min)
-		return -EDOM;
-	if (vs == hs)
-		return -EINVAL;
-	rfbi.tearsync_pin_cnt = pin_cnt;
-	dev_dbg(rfbi.fbdev->dev,
-		"setup_tearsync: pins %d hs %d vs %d hs_inv %d vs_inv %d\n",
-		pin_cnt, hs, vs, hs_pol_inv, vs_pol_inv);
-
-	rfbi_enable_clocks(1);
-	rfbi_write_reg(RFBI_HSYNC_WIDTH, hs);
-	rfbi_write_reg(RFBI_VSYNC_WIDTH, vs);
-
-	l = rfbi_read_reg(RFBI_CONFIG0);
-	if (hs_pol_inv)
-		l &= ~(1 << 21);
-	else
-		l |= 1 << 21;
-	if (vs_pol_inv)
-		l &= ~(1 << 20);
-	else
-		l |= 1 << 20;
-	rfbi_enable_clocks(0);
-
-	return 0;
-}
-
-static int rfbi_enable_tearsync(int enable, unsigned line)
-{
-	u32 l;
-
-	dev_dbg(rfbi.fbdev->dev, "tearsync %d line %d mode %d\n",
-		enable, line, rfbi.tearsync_mode);
-	if (line > (1 << 11) - 1)
-		return -EINVAL;
-
-	rfbi_enable_clocks(1);
-	l = rfbi_read_reg(RFBI_CONFIG0);
-	l &= ~(0x3 << 2);
-	if (enable) {
-		rfbi.tearsync_mode = rfbi.tearsync_pin_cnt;
-		l |= rfbi.tearsync_mode << 2;
-	} else
-		rfbi.tearsync_mode = 0;
-	rfbi_write_reg(RFBI_CONFIG0, l);
-	rfbi_write_reg(RFBI_LINE_NUMBER, line);
-	rfbi_enable_clocks(0);
-
-	return 0;
-}
-
-static void rfbi_write_command(const void *buf, unsigned int len)
-{
-	rfbi_enable_clocks(1);
-	if (rfbi.bits_per_cycle == 16) {
-		const u16 *w = buf;
-		BUG_ON(len & 1);
-		for (; len; len -= 2)
-			rfbi_write_reg(RFBI_CMD, *w++);
-	} else {
-		const u8 *b = buf;
-		BUG_ON(rfbi.bits_per_cycle != 8);
-		for (; len; len--)
-			rfbi_write_reg(RFBI_CMD, *b++);
-	}
-	rfbi_enable_clocks(0);
-}
-
-static void rfbi_read_data(void *buf, unsigned int len)
-{
-	rfbi_enable_clocks(1);
-	if (rfbi.bits_per_cycle == 16) {
-		u16 *w = buf;
-		BUG_ON(len & ~1);
-		for (; len; len -= 2) {
-			rfbi_write_reg(RFBI_READ, 0);
-			*w++ = rfbi_read_reg(RFBI_READ);
-		}
-	} else {
-		u8 *b = buf;
-		BUG_ON(rfbi.bits_per_cycle != 8);
-		for (; len; len--) {
-			rfbi_write_reg(RFBI_READ, 0);
-			*b++ = rfbi_read_reg(RFBI_READ);
-		}
-	}
-	rfbi_enable_clocks(0);
-}
-
-static void rfbi_write_data(const void *buf, unsigned int len)
-{
-	rfbi_enable_clocks(1);
-	if (rfbi.bits_per_cycle == 16) {
-		const u16 *w = buf;
-		BUG_ON(len & 1);
-		for (; len; len -= 2)
-			rfbi_write_reg(RFBI_PARAM, *w++);
-	} else {
-		const u8 *b = buf;
-		BUG_ON(rfbi.bits_per_cycle != 8);
-		for (; len; len--)
-			rfbi_write_reg(RFBI_PARAM, *b++);
-	}
-	rfbi_enable_clocks(0);
-}
-
-static void rfbi_transfer_area(int width, int height,
-				void (callback)(void * data), void *data)
-{
-	u32 w;
-
-	BUG_ON(callback == NULL);
-
-	rfbi_enable_clocks(1);
-	omap_dispc_set_lcd_size(width, height);
-
-	rfbi.lcdc_callback = callback;
-	rfbi.lcdc_callback_data = data;
-
-	rfbi_write_reg(RFBI_PIXEL_CNT, width * height);
-
-	w = rfbi_read_reg(RFBI_CONTROL);
-	w |= 1;				/* enable */
-	if (!rfbi.tearsync_mode)
-		w |= 1 << 4;		/* internal trigger, reset by HW */
-	rfbi_write_reg(RFBI_CONTROL, w);
-
-	omap_dispc_enable_lcd_out(1);
-}
-
-static inline void _stop_transfer(void)
-{
-	u32 w;
-
-	w = rfbi_read_reg(RFBI_CONTROL);
-	rfbi_write_reg(RFBI_CONTROL, w & ~(1 << 0));
-	rfbi_enable_clocks(0);
-}
-
-static void rfbi_dma_callback(void *data)
-{
-	_stop_transfer();
-	rfbi.lcdc_callback(rfbi.lcdc_callback_data);
-}
-
-static void rfbi_set_bits_per_cycle(int bpc)
-{
-	u32 l;
-
-	rfbi_enable_clocks(1);
-	l = rfbi_read_reg(RFBI_CONFIG0);
-	l &= ~(0x03 << 0);
-
-	switch (bpc) {
-	case 8:
-		break;
-	case 16:
-		l |= 3;
-		break;
-	default:
-		BUG();
-	}
-	rfbi_write_reg(RFBI_CONFIG0, l);
-	rfbi.bits_per_cycle = bpc;
-	rfbi_enable_clocks(0);
-}
-
-static int rfbi_init(struct omapfb_device *fbdev)
-{
-	u32 l;
-	int r;
-
-	rfbi.fbdev = fbdev;
-	rfbi.base = ioremap(RFBI_BASE, SZ_1K);
-	if (!rfbi.base) {
-		dev_err(fbdev->dev, "can't ioremap RFBI\n");
-		return -ENOMEM;
-	}
-
-	if ((r = rfbi_get_clocks()) < 0)
-		return r;
-	rfbi_enable_clocks(1);
-
-	rfbi.l4_khz = clk_get_rate(rfbi.dss_ick) / 1000;
-
-	/* Reset */
-	rfbi_write_reg(RFBI_SYSCONFIG, 1 << 1);
-	while (!(rfbi_read_reg(RFBI_SYSSTATUS) & (1 << 0)));
-
-	l = rfbi_read_reg(RFBI_SYSCONFIG);
-	/* Enable autoidle and smart-idle */
-	l |= (1 << 0) | (2 << 3);
-	rfbi_write_reg(RFBI_SYSCONFIG, l);
-
-	/* 16-bit interface, ITE trigger mode, 16-bit data */
-	l = (0x03 << 0) | (0x00 << 2) | (0x01 << 5) | (0x02 << 7);
-	l |= (0 << 9) | (1 << 20) | (1 << 21);
-	rfbi_write_reg(RFBI_CONFIG0, l);
-
-	rfbi_write_reg(RFBI_DATA_CYCLE1_0, 0x00000010);
-
-	l = rfbi_read_reg(RFBI_CONTROL);
-	/* Select CS0, clear bypass mode */
-	l = (0x01 << 2);
-	rfbi_write_reg(RFBI_CONTROL, l);
-
-	r = omap_dispc_request_irq(DISPC_IRQ_FRAMEMASK, rfbi_dma_callback,
-				   NULL);
-	if (r < 0) {
-		dev_err(fbdev->dev, "can't get DISPC irq\n");
-		rfbi_enable_clocks(0);
-		return r;
-	}
-
-	l = rfbi_read_reg(RFBI_REVISION);
-	pr_info("omapfb: RFBI version %d.%d initialized\n",
-		(l >> 4) & 0x0f, l & 0x0f);
-
-	rfbi_enable_clocks(0);
-
-	return 0;
-}
-
-static void rfbi_cleanup(void)
-{
-	omap_dispc_free_irq(DISPC_IRQ_FRAMEMASK, rfbi_dma_callback, NULL);
-	rfbi_put_clocks();
-	iounmap(rfbi.base);
-}
-
-const struct lcd_ctrl_extif omap2_ext_if = {
-	.init			= rfbi_init,
-	.cleanup		= rfbi_cleanup,
-	.get_clk_info		= rfbi_get_clk_info,
-	.get_max_tx_rate	= rfbi_get_max_tx_rate,
-	.set_bits_per_cycle	= rfbi_set_bits_per_cycle,
-	.convert_timings	= rfbi_convert_timings,
-	.set_timings		= rfbi_set_timings,
-	.write_command		= rfbi_write_command,
-	.read_data		= rfbi_read_data,
-	.write_data		= rfbi_write_data,
-	.transfer_area		= rfbi_transfer_area,
-	.setup_tearsync		= rfbi_setup_tearsync,
-	.enable_tearsync	= rfbi_enable_tearsync,
-
-	.max_transmit_size	= (u32) ~0,
-};
-