video: move fbdev to drivers/video/fbdev

The drivers/video directory is a mess. It contains generic video related
files, directories for backlight, console, linux logo, lots of fbdev
device drivers, fbdev framework files.

Make some order into the chaos by creating drivers/video/fbdev
directory, and move all fbdev related files there.

No functionality is changed, although I guess it is possible that some
subtle Makefile build order related issue could be created by this
patch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 0 insertions, 358 deletions

diff --git a/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c
deleted file mode 100644
index 2e6b513222d9..000000000000
--- a/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * LG.Philips LB035Q02 LCD Panel driver
- *
- * Copyright (C) 2013 Texas Instruments
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- * Based on a driver by: Steve Sakoman <steve@sakoman.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/mutex.h>
-#include <linux/gpio.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-static struct omap_video_timings lb035q02_timings = {
-	.x_res = 320,
-	.y_res = 240,
-
-	.pixelclock	= 6500000,
-
-	.hsw		= 2,
-	.hfp		= 20,
-	.hbp		= 68,
-
-	.vsw		= 2,
-	.vfp		= 4,
-	.vbp		= 18,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
-};
-
-struct panel_drv_data {
-	struct omap_dss_device dssdev;
-	struct omap_dss_device *in;
-
-	struct spi_device *spi;
-
-	int data_lines;
-
-	struct omap_video_timings videomode;
-
-	int reset_gpio;
-	int backlight_gpio;
-	int enable_gpio;
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static int lb035q02_write_reg(struct spi_device *spi, u8 reg, u16 val)
-{
-	struct spi_message msg;
-	struct spi_transfer index_xfer = {
-		.len		= 3,
-		.cs_change	= 1,
-	};
-	struct spi_transfer value_xfer = {
-		.len		= 3,
-	};
-	u8	buffer[16];
-
-	spi_message_init(&msg);
-
-	/* register index */
-	buffer[0] = 0x70;
-	buffer[1] = 0x00;
-	buffer[2] = reg & 0x7f;
-	index_xfer.tx_buf = buffer;
-	spi_message_add_tail(&index_xfer, &msg);
-
-	/* register value */
-	buffer[4] = 0x72;
-	buffer[5] = val >> 8;
-	buffer[6] = val;
-	value_xfer.tx_buf = buffer + 4;
-	spi_message_add_tail(&value_xfer, &msg);
-
-	return spi_sync(spi, &msg);
-}
-
-static void init_lb035q02_panel(struct spi_device *spi)
-{
-	/* Init sequence from page 28 of the lb035q02 spec */
-	lb035q02_write_reg(spi, 0x01, 0x6300);
-	lb035q02_write_reg(spi, 0x02, 0x0200);
-	lb035q02_write_reg(spi, 0x03, 0x0177);
-	lb035q02_write_reg(spi, 0x04, 0x04c7);
-	lb035q02_write_reg(spi, 0x05, 0xffc0);
-	lb035q02_write_reg(spi, 0x06, 0xe806);
-	lb035q02_write_reg(spi, 0x0a, 0x4008);
-	lb035q02_write_reg(spi, 0x0b, 0x0000);
-	lb035q02_write_reg(spi, 0x0d, 0x0030);
-	lb035q02_write_reg(spi, 0x0e, 0x2800);
-	lb035q02_write_reg(spi, 0x0f, 0x0000);
-	lb035q02_write_reg(spi, 0x16, 0x9f80);
-	lb035q02_write_reg(spi, 0x17, 0x0a0f);
-	lb035q02_write_reg(spi, 0x1e, 0x00c1);
-	lb035q02_write_reg(spi, 0x30, 0x0300);
-	lb035q02_write_reg(spi, 0x31, 0x0007);
-	lb035q02_write_reg(spi, 0x32, 0x0000);
-	lb035q02_write_reg(spi, 0x33, 0x0000);
-	lb035q02_write_reg(spi, 0x34, 0x0707);
-	lb035q02_write_reg(spi, 0x35, 0x0004);
-	lb035q02_write_reg(spi, 0x36, 0x0302);
-	lb035q02_write_reg(spi, 0x37, 0x0202);
-	lb035q02_write_reg(spi, 0x3a, 0x0a0d);
-	lb035q02_write_reg(spi, 0x3b, 0x0806);
-}
-
-static int lb035q02_connect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (omapdss_device_is_connected(dssdev))
-		return 0;
-
-	r = in->ops.dpi->connect(in, dssdev);
-	if (r)
-		return r;
-
-	init_lb035q02_panel(ddata->spi);
-
-	return 0;
-}
-
-static void lb035q02_disconnect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return;
-
-	in->ops.dpi->disconnect(in, dssdev);
-}
-
-static int lb035q02_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return -ENODEV;
-
-	if (omapdss_device_is_enabled(dssdev))
-		return 0;
-
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
-	in->ops.dpi->set_timings(in, &ddata->videomode);
-
-	r = in->ops.dpi->enable(in);
-	if (r)
-		return r;
-
-	if (gpio_is_valid(ddata->enable_gpio))
-		gpio_set_value_cansleep(ddata->enable_gpio, 1);
-
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
-}
-
-static void lb035q02_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_enabled(dssdev))
-		return;
-
-	if (gpio_is_valid(ddata->enable_gpio))
-		gpio_set_value_cansleep(ddata->enable_gpio, 0);
-
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
-
-	in->ops.dpi->disable(in);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static void lb035q02_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	ddata->videomode = *timings;
-	dssdev->panel.timings = *timings;
-
-	in->ops.dpi->set_timings(in, timings);
-}
-
-static void lb035q02_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	*timings = ddata->videomode;
-}
-
-static int lb035q02_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.dpi->check_timings(in, timings);
-}
-
-static struct omap_dss_driver lb035q02_ops = {
-	.connect	= lb035q02_connect,
-	.disconnect	= lb035q02_disconnect,
-
-	.enable		= lb035q02_enable,
-	.disable	= lb035q02_disable,
-
-	.set_timings	= lb035q02_set_timings,
-	.get_timings	= lb035q02_get_timings,
-	.check_timings	= lb035q02_check_timings,
-
-	.get_resolution	= omapdss_default_get_resolution,
-};
-
-static int lb035q02_probe_pdata(struct spi_device *spi)
-{
-	const struct panel_lb035q02_platform_data *pdata;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev, *in;
-
-	pdata = dev_get_platdata(&spi->dev);
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&spi->dev, "failed to find video source '%s'\n",
-				pdata->source);
-		return -EPROBE_DEFER;
-	}
-
-	ddata->in = in;
-
-	ddata->data_lines = pdata->data_lines;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	ddata->enable_gpio = pdata->enable_gpio;
-	ddata->backlight_gpio = pdata->backlight_gpio;
-
-	return 0;
-}
-
-static int lb035q02_panel_spi_probe(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata;
-	struct omap_dss_device *dssdev;
-	int r;
-
-	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
-	if (ddata == NULL)
-		return -ENOMEM;
-
-	dev_set_drvdata(&spi->dev, ddata);
-
-	ddata->spi = spi;
-
-	if (dev_get_platdata(&spi->dev)) {
-		r = lb035q02_probe_pdata(spi);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	if (gpio_is_valid(ddata->enable_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->enable_gpio,
-				GPIOF_OUT_INIT_LOW, "panel enable");
-		if (r)
-			goto err_gpio;
-	}
-
-	if (gpio_is_valid(ddata->backlight_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
-				GPIOF_OUT_INIT_LOW, "panel backlight");
-		if (r)
-			goto err_gpio;
-	}
-
-	ddata->videomode = lb035q02_timings;
-
-	dssdev = &ddata->dssdev;
-	dssdev->dev = &spi->dev;
-	dssdev->driver = &lb035q02_ops;
-	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
-	dssdev->owner = THIS_MODULE;
-	dssdev->panel.timings = ddata->videomode;
-	dssdev->phy.dpi.data_lines = ddata->data_lines;
-
-	r = omapdss_register_display(dssdev);
-	if (r) {
-		dev_err(&spi->dev, "Failed to register panel\n");
-		goto err_reg;
-	}
-
-	return 0;
-
-err_reg:
-err_gpio:
-	omap_dss_put_device(ddata->in);
-	return r;
-}
-
-static int lb035q02_panel_spi_remove(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-	struct omap_dss_device *in = ddata->in;
-
-	omapdss_unregister_display(dssdev);
-
-	lb035q02_disable(dssdev);
-	lb035q02_disconnect(dssdev);
-
-	omap_dss_put_device(in);
-
-	return 0;
-}
-
-static struct spi_driver lb035q02_spi_driver = {
-	.probe		= lb035q02_panel_spi_probe,
-	.remove		= lb035q02_panel_spi_remove,
-	.driver		= {
-		.name	= "panel_lgphilips_lb035q02",
-		.owner	= THIS_MODULE,
-	},
-};
-
-module_spi_driver(lb035q02_spi_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
-MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
-MODULE_LICENSE("GPL");