Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

5 files changed, 3060 insertions, 0 deletions

diff --git a/drivers/video/savage/Makefile b/drivers/video/savage/Makefile
new file mode 100644
index 000000000000..e09770fff8ea
--- /dev/null
+++ b/drivers/video/savage/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the S3 Savage framebuffer driver
+#
+
+obj-$(CONFIG_FB_SAVAGE)			+= savagefb.o
+
+savagefb-y				+= savagefb_driver.o
+savagefb-$(CONFIG_FB_SAVAGE_I2C)	+= savagefb-i2c.o
+savagefb-$(CONFIG_FB_SAVAGE_ACCEL)	+= savagefb_accel.o
diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c
new file mode 100644
index 000000000000..024a0cecff15
--- /dev/null
+++ b/drivers/video/savage/savagefb-i2c.c
@@ -0,0 +1,282 @@
+/*
+ * linux/drivers/video/savage/savagefb-i2c.c - S3 Savage DDC2
+ *
+ * Copyright 2004 Antonino A. Daplas <adaplas @pol.net>
+ *
+ * Based partly on rivafb-i2c.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/fb.h>
+
+#include <asm/io.h>
+#include "savagefb.h"
+
+#define SAVAGE_DDC 	0x50
+
+#define VGA_CR_IX	0x3d4
+#define VGA_CR_DATA	0x3d5
+
+#define CR_SERIAL1	0xa0	/* I2C serial communications interface */
+#define MM_SERIAL1	0xff20
+#define CR_SERIAL2	0xb1	/* DDC2 monitor communications interface */
+
+/* based on vt8365 documentation */
+#define PROSAVAGE_I2C_ENAB	0x10
+#define PROSAVAGE_I2C_SCL_OUT	0x01
+#define PROSAVAGE_I2C_SDA_OUT	0x02
+#define PROSAVAGE_I2C_SCL_IN	0x04
+#define PROSAVAGE_I2C_SDA_IN	0x08
+
+#define SAVAGE4_I2C_ENAB	0x00000020
+#define SAVAGE4_I2C_SCL_OUT	0x00000001
+#define SAVAGE4_I2C_SDA_OUT	0x00000002
+#define SAVAGE4_I2C_SCL_IN	0x00000008
+#define SAVAGE4_I2C_SDA_IN	0x00000010
+
+#define SET_CR_IX(base, val)	writeb((val), base + 0x8000 + VGA_CR_IX)
+#define SET_CR_DATA(base, val)	writeb((val), base + 0x8000 + VGA_CR_DATA)
+#define GET_CR_DATA(base)	readb(base + 0x8000 + VGA_CR_DATA)
+
+static void savage4_gpio_setscl(void *data, int val)
+{
+	struct savagefb_i2c_chan *chan = (struct savagefb_i2c_chan *)data;
+	unsigned int r;
+
+	r = readl(chan->ioaddr + chan->reg);
+	if(val)
+		r |= SAVAGE4_I2C_SCL_OUT;
+	else
+		r &= ~SAVAGE4_I2C_SCL_OUT;
+	writel(r, chan->ioaddr + chan->reg);
+	readl(chan->ioaddr + chan->reg);	/* flush posted write */
+}
+
+static void savage4_gpio_setsda(void *data, int val)
+{
+	struct savagefb_i2c_chan *chan = (struct savagefb_i2c_chan *)data;
+
+	unsigned int r;
+	r = readl(chan->ioaddr + chan->reg);
+	if(val)
+		r |= SAVAGE4_I2C_SDA_OUT;
+	else
+		r &= ~SAVAGE4_I2C_SDA_OUT;
+	writel(r, chan->ioaddr + chan->reg);
+	readl(chan->ioaddr + chan->reg);	/* flush posted write */
+}
+
+static int savage4_gpio_getscl(void *data)
+{
+	struct savagefb_i2c_chan *chan = (struct savagefb_i2c_chan *)data;
+
+	return (0 != (readl(chan->ioaddr + chan->reg) & SAVAGE4_I2C_SCL_IN));
+}
+
+static int savage4_gpio_getsda(void *data)
+{
+	struct savagefb_i2c_chan *chan = (struct savagefb_i2c_chan *)data;
+
+	return (0 != (readl(chan->ioaddr + chan->reg) & SAVAGE4_I2C_SDA_IN));
+}
+
+static void prosavage_gpio_setscl(void* data, int val)
+{
+	struct savagefb_i2c_chan *chan = (struct savagefb_i2c_chan *)data;
+	u32			  r;
+
+	SET_CR_IX(chan->ioaddr, chan->reg);
+	r = GET_CR_DATA(chan->ioaddr);
+	r |= PROSAVAGE_I2C_ENAB;
+	if (val) {
+		r |= PROSAVAGE_I2C_SCL_OUT;
+	} else {
+		r &= ~PROSAVAGE_I2C_SCL_OUT;
+	}
+	SET_CR_DATA(chan->ioaddr, r);
+}
+
+static void prosavage_gpio_setsda(void* data, int val)
+{
+	struct savagefb_i2c_chan *chan = (struct savagefb_i2c_chan *)data;
+	unsigned int r;
+
+	SET_CR_IX(chan->ioaddr, chan->reg);
+	r = GET_CR_DATA(chan->ioaddr);
+	r |= PROSAVAGE_I2C_ENAB;
+	if (val) {
+		r |= PROSAVAGE_I2C_SDA_OUT;
+	} else {
+		r &= ~PROSAVAGE_I2C_SDA_OUT;
+	}
+	SET_CR_DATA(chan->ioaddr, r);
+}
+
+static int prosavage_gpio_getscl(void* data)
+{
+	struct savagefb_i2c_chan *chan = (struct savagefb_i2c_chan *)data;
+
+	SET_CR_IX(chan->ioaddr, chan->reg);
+	return (0 != (GET_CR_DATA(chan->ioaddr) & PROSAVAGE_I2C_SCL_IN));
+}
+
+static int prosavage_gpio_getsda(void* data)
+{
+	struct savagefb_i2c_chan *chan = (struct savagefb_i2c_chan *)data;
+
+	SET_CR_IX(chan->ioaddr, chan->reg);
+	return (0 != (GET_CR_DATA(chan->ioaddr) & PROSAVAGE_I2C_SDA_IN));
+}
+
+#define I2C_ALGO_SAVAGE   0x0f0000
+static int savage_setup_i2c_bus(struct savagefb_i2c_chan *chan,
+				const char *name)
+{
+	int (*add_bus)(struct i2c_adapter *) = symbol_get(i2c_bit_add_bus);
+	int rc = 0;
+
+	if (add_bus && chan->par) {
+		strcpy(chan->adapter.name, name);
+		chan->adapter.owner		= THIS_MODULE;
+		chan->adapter.id		= I2C_ALGO_SAVAGE;
+		chan->adapter.algo_data		= &chan->algo;
+		chan->adapter.dev.parent	= &chan->par->pcidev->dev;
+		chan->algo.udelay		= 40;
+		chan->algo.mdelay               = 5;
+		chan->algo.timeout		= 20;
+		chan->algo.data 		= chan;
+
+		i2c_set_adapdata(&chan->adapter, chan);
+
+		/* Raise SCL and SDA */
+		chan->algo.setsda(chan, 1);
+		chan->algo.setscl(chan, 1);
+		udelay(20);
+
+		rc = add_bus(&chan->adapter);
+
+		if (rc == 0)
+			dev_dbg(&chan->par->pcidev->dev,
+				"I2C bus %s registered.\n", name);
+		else
+			dev_warn(&chan->par->pcidev->dev,
+				 "Failed to register I2C bus %s.\n", name);
+
+		symbol_put(i2c_bit_add_bus);
+	} else
+		chan->par = NULL;
+
+	return rc;
+}
+
+void savagefb_create_i2c_busses(struct fb_info *info)
+{
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+	par->chan.par	= par;
+
+	switch(info->fix.accel) {
+	case FB_ACCEL_PROSAVAGE_DDRK:
+	case FB_ACCEL_PROSAVAGE_PM:
+		par->chan.reg         = CR_SERIAL2;
+		par->chan.ioaddr      = par->mmio.vbase;
+		par->chan.algo.setsda = prosavage_gpio_setsda;
+		par->chan.algo.setscl = prosavage_gpio_setscl;
+		par->chan.algo.getsda = prosavage_gpio_getsda;
+		par->chan.algo.getscl = prosavage_gpio_getscl;
+		break;
+	case FB_ACCEL_SAVAGE4:
+		par->chan.reg         = 0xff20;
+		par->chan.ioaddr      = par->mmio.vbase;
+		par->chan.algo.setsda = savage4_gpio_setsda;
+		par->chan.algo.setscl = savage4_gpio_setscl;
+		par->chan.algo.getsda = savage4_gpio_getsda;
+		par->chan.algo.getscl = savage4_gpio_getscl;
+		break;
+	default:
+		par->chan.par = NULL;
+	}
+
+	savage_setup_i2c_bus(&par->chan, "SAVAGE DDC2");
+}
+
+void savagefb_delete_i2c_busses(struct fb_info *info)
+{
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+	int (*del_bus)(struct i2c_adapter *) =
+		symbol_get(i2c_bit_del_bus);
+
+	if (del_bus && par->chan.par) {
+		del_bus(&par->chan.adapter);
+		symbol_put(i2c_bit_del_bus);
+	}
+
+	par->chan.par = NULL;
+}
+
+static u8 *savage_do_probe_i2c_edid(struct savagefb_i2c_chan *chan)
+{
+	u8 start = 0x0;
+	int (*transfer)(struct i2c_adapter *, struct i2c_msg *, int) =
+		symbol_get(i2c_transfer);
+	struct i2c_msg msgs[] = {
+		{
+			.addr	= SAVAGE_DDC,
+			.len	= 1,
+			.buf	= &start,
+		}, {
+			.addr	= SAVAGE_DDC,
+			.flags	= I2C_M_RD,
+			.len	= EDID_LENGTH,
+		},
+	};
+	u8 *buf = NULL;
+
+	if (transfer && chan->par) {
+		buf = kmalloc(EDID_LENGTH, GFP_KERNEL);
+
+		if (buf) {
+			msgs[1].buf = buf;
+
+			if (transfer(&chan->adapter, msgs, 2) != 2) {
+				dev_dbg(&chan->par->pcidev->dev,
+					"Unable to read EDID block.\n");
+				kfree(buf);
+				buf = NULL;
+			}
+		}
+
+		symbol_put(i2c_transfer);
+	}
+
+	return buf;
+}
+
+int savagefb_probe_i2c_connector(struct savagefb_par *par, u8 **out_edid)
+{
+	u8 *edid = NULL;
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		/* Do the real work */
+		edid = savage_do_probe_i2c_edid(&par->chan);
+		if (edid)
+			break;
+	}
+	if (out_edid)
+		*out_edid = edid;
+	if (!edid)
+		return 1;
+
+	return 0;
+}
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/savage/savagefb.h b/drivers/video/savage/savagefb.h
new file mode 100644
index 000000000000..8594b1e42d71
--- /dev/null
+++ b/drivers/video/savage/savagefb.h
@@ -0,0 +1,354 @@
+/*
+ * linux/drivers/video/savagefb.h -- S3 Savage Framebuffer Driver
+ *
+ * Copyright (c) 2001  Denis Oliver Kropp <dok@convergence.de>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+
+#ifndef __SAVAGEFB_H__
+#define __SAVAGEFB_H__
+
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <linux/i2c-algo-bit.h>
+#include "../edid.h"
+
+#ifdef SAVAGEFB_DEBUG
+# define DBG(x)		printk (KERN_DEBUG "savagefb: %s\n", (x));
+#else
+# define DBG(x)
+# define SavagePrintRegs(...)
+#endif
+
+
+#define PCI_CHIP_SAVAGE4      0x8a22
+#define PCI_CHIP_SAVAGE3D     0x8a20
+#define PCI_CHIP_SAVAGE3D_MV  0x8a21
+#define PCI_CHIP_SAVAGE2000   0x9102
+#define PCI_CHIP_SAVAGE_MX_MV 0x8c10
+#define PCI_CHIP_SAVAGE_MX    0x8c11
+#define PCI_CHIP_SAVAGE_IX_MV 0x8c12
+#define PCI_CHIP_SAVAGE_IX    0x8c13
+#define PCI_CHIP_PROSAVAGE_PM 0x8a25
+#define PCI_CHIP_PROSAVAGE_KM 0x8a26
+ /* Twister is a code name; hope I get the real name soon. */
+#define PCI_CHIP_S3TWISTER_P  0x8d01
+#define PCI_CHIP_S3TWISTER_K  0x8d02
+#define PCI_CHIP_PROSAVAGE_DDR          0x8d03
+#define PCI_CHIP_PROSAVAGE_DDRK         0x8d04
+#define PCI_CHIP_SUPSAV_MX128		0x8c22
+#define PCI_CHIP_SUPSAV_MX64		0x8c24
+#define PCI_CHIP_SUPSAV_MX64C		0x8c26
+#define PCI_CHIP_SUPSAV_IX128SDR	0x8c2a
+#define PCI_CHIP_SUPSAV_IX128DDR	0x8c2b
+#define PCI_CHIP_SUPSAV_IX64SDR		0x8c2c
+#define PCI_CHIP_SUPSAV_IX64DDR		0x8c2d
+#define PCI_CHIP_SUPSAV_IXCSDR		0x8c2e
+#define PCI_CHIP_SUPSAV_IXCDDR		0x8c2f
+
+
+
+#define S3_SAVAGE3D_SERIES(chip)  ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE_MX))
+
+#define S3_SAVAGE4_SERIES(chip)   ((chip==S3_SAVAGE4) || (chip==S3_PROSAVAGE))
+
+#define S3_SAVAGE_MOBILE_SERIES(chip)  ((chip==S3_SAVAGE_MX) || (chip==S3_SUPERSAVAGE))
+
+#define S3_SAVAGE_SERIES(chip)    ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE2000))
+
+
+/* Chip tags.  These are used to group the adapters into
+ * related families.
+ */
+
+typedef enum {
+  S3_UNKNOWN = 0,
+  S3_SAVAGE3D,
+  S3_SAVAGE_MX,
+  S3_SAVAGE4,
+  S3_PROSAVAGE,
+  S3_SUPERSAVAGE,
+  S3_SAVAGE2000,
+  S3_LAST
+} savage_chipset;
+
+#define BIOS_BSIZE		     1024
+#define BIOS_BASE		     0xc0000
+
+#define SAVAGE_NEWMMIO_REGBASE_S3    0x1000000  /* 16MB */
+#define SAVAGE_NEWMMIO_REGBASE_S4    0x0000000
+#define SAVAGE_NEWMMIO_REGSIZE	     0x0080000  /* 512kb */
+#define SAVAGE_NEWMMIO_VGABASE	     0x8000
+
+#define BASE_FREQ		     14318
+#define HALF_BASE_FREQ               7159
+
+#define FIFO_CONTROL_REG	     0x8200
+#define MIU_CONTROL_REG		     0x8204
+#define STREAMS_TIMEOUT_REG	     0x8208
+#define MISC_TIMEOUT_REG	     0x820c
+
+#define MONO_PAT_0                   0xa4e8
+#define MONO_PAT_1                   0xa4ec
+
+#define MAXFIFO                      0x7f00
+
+#define BCI_CMD_NOP                  0x40000000
+#define BCI_CMD_SETREG               0x96000000
+#define BCI_CMD_RECT                 0x48000000
+#define BCI_CMD_RECT_XP              0x01000000
+#define BCI_CMD_RECT_YP              0x02000000
+#define BCI_CMD_SEND_COLOR           0x00008000
+#define BCI_CMD_DEST_GBD             0x00000000
+#define BCI_CMD_SRC_GBD              0x00000020
+#define BCI_CMD_SRC_SOLID            0x00000000
+#define BCI_CMD_SRC_MONO             0x00000060
+#define BCI_CMD_CLIP_NEW             0x00006000
+#define BCI_CMD_CLIP_LR              0x00004000
+
+#define BCI_CLIP_LR(l, r)            ((((r) << 16) | (l)) & 0x0FFF0FFF)
+#define BCI_CLIP_TL(t, l)            ((((t) << 16) | (l)) & 0x0FFF0FFF)
+#define BCI_CLIP_BR(b, r)            ((((b) << 16) | (r)) & 0x0FFF0FFF)
+#define BCI_W_H(w, h)                (((h) << 16) | ((w) & 0xFFF))
+#define BCI_X_Y(x, y)                (((y) << 16) | ((x) & 0xFFF))
+
+#define BCI_GBD1                     0xE0
+#define BCI_GBD2                     0xE1
+
+#define BCI_BUFFER_OFFSET            0x10000
+#define BCI_SIZE                     0x4000
+
+#define BCI_SEND(dw)                 writel(dw, par->bci_base + par->bci_ptr++)
+
+#define BCI_CMD_GET_ROP(cmd)         (((cmd) >> 16) & 0xFF)
+#define BCI_CMD_SET_ROP(cmd, rop)    ((cmd) |= ((rop & 0xFF) << 16))
+#define BCI_CMD_SEND_COLOR           0x00008000
+
+struct xtimings {
+	unsigned int Clock;
+	unsigned int HDisplay;
+	unsigned int HSyncStart;
+	unsigned int HSyncEnd;
+	unsigned int HTotal;
+	unsigned int HAdjusted;
+	unsigned int VDisplay;
+	unsigned int VSyncStart;
+	unsigned int VSyncEnd;
+	unsigned int VTotal;
+	unsigned int sync;
+	int	       dblscan;
+	int	       interlaced;
+};
+
+
+/* --------------------------------------------------------------------- */
+
+#define NR_PALETTE	256
+
+
+struct savagefb_par;
+
+struct savagefb_i2c_chan {
+	struct savagefb_par *par;
+	struct i2c_adapter adapter;
+	struct i2c_algo_bit_data algo;
+	volatile u8 __iomem *ioaddr;
+	u32   reg;
+};
+
+struct savagefb_par {
+	struct pci_dev *pcidev;
+	savage_chipset  chip;
+	struct savagefb_i2c_chan chan;
+	unsigned char   *edid;
+	u32 pseudo_palette[16];
+	int dacSpeedBpp;
+	int maxClock;
+	int minClock;
+	int numClocks;
+	int clock[4];
+	struct {
+		u8   __iomem *vbase;
+		u32    pbase;
+		u32    len;
+#ifdef CONFIG_MTRR
+		int    mtrr;
+#endif
+	} video;
+
+	struct {
+		volatile u8  __iomem *vbase;
+		u32           pbase;
+		u32           len;
+	} mmio;
+
+	volatile u32  __iomem *bci_base;
+	unsigned int  bci_ptr;
+
+	u32           cob_offset;
+	u32           cob_size;
+	int           cob_index;
+
+	void (*SavageWaitIdle) (struct savagefb_par *par);
+	void (*SavageWaitFifo) (struct savagefb_par *par, int space);
+
+	int MCLK, REFCLK, LCDclk;
+	int HorizScaleFactor;
+
+	/* Panels size */
+	int SavagePanelWidth;
+	int SavagePanelHeight;
+
+	struct {
+		u16 red, green, blue, transp;
+	} palette[NR_PALETTE];
+
+	int depth;
+	int vwidth;
+
+	unsigned char MiscOutReg;     /* Misc */
+	unsigned char CRTC[25];       /* Crtc Controller */
+	unsigned char Sequencer[5];   /* Video Sequencer */
+	unsigned char Graphics[9];    /* Video Graphics */
+	unsigned char Attribute[21];  /* Video Atribute */
+
+	unsigned int mode, refresh;
+	unsigned char SR08, SR0E, SR0F;
+	unsigned char SR10, SR11, SR12, SR13, SR15, SR18, SR29, SR30;
+	unsigned char SR54[8];
+	unsigned char Clock;
+	unsigned char CR31, CR32, CR33, CR34, CR36, CR3A, CR3B, CR3C;
+	unsigned char CR40, CR41, CR42, CR43, CR45;
+	unsigned char CR50, CR51, CR53, CR55, CR58, CR5B, CR5D, CR5E;
+	unsigned char CR60, CR63, CR65, CR66, CR67, CR68, CR69, CR6D, CR6F;
+	unsigned char CR86, CR88;
+	unsigned char CR90, CR91, CRB0;
+	unsigned int  STREAMS[22];	/* yuck, streams regs */
+	unsigned int  MMPR0, MMPR1, MMPR2, MMPR3;
+};
+
+#define BCI_BD_BW_DISABLE            0x10000000
+#define BCI_BD_SET_BPP(bd, bpp)      ((bd) |= (((bpp) & 0xFF) << 16))
+#define BCI_BD_SET_STRIDE(bd, st)    ((bd) |= ((st) & 0xFFFF))
+
+
+/* IO functions */
+
+#define  vga_in8(addr)         (inb (addr))
+#define vga_in16(addr)         (inw (addr))
+#define vga_in32(addr)         (inl (addr))
+
+#define  vga_out8(addr,val)    (outb ((val), (addr)))
+#define vga_out16(addr,val)    (outw ((val), (addr)))
+#define vga_out32(addr,val)    (outl ((val), (addr)))
+
+#define savage_in16(addr)      readw(par->mmio.vbase + (addr))
+#define savage_in32(addr)      readl(par->mmio.vbase + (addr))
+
+#define savage_out16(addr,val) writew((val), par->mmio.vbase + (addr))
+#define savage_out32(addr,val) writel((val), par->mmio.vbase + (addr))
+
+static inline u8 VGArCR (u8 index)
+{
+  outb (index, 0x3d4);
+  return inb (0x3d5);
+}
+
+static inline u8 VGArGR (u8 index)
+{
+  outb (index, 0x3ce);
+  return inb (0x3cf);
+}
+
+static inline u8 VGArSEQ (u8 index)
+{
+  outb (index, 0x3c4);
+  return inb (0x3c5);
+}
+
+#define VGAwCR(index, val) \
+do {                       \
+  vga_out8 (0x3d4, index); \
+  vga_out8 (0x3d5, val);   \
+} while (0)
+
+#define VGAwGR(index, val) \
+do {                       \
+  vga_out8 (0x3ce, index); \
+  vga_out8 (0x3cf, val);   \
+} while (0)
+
+#define VGAwSEQ(index, val) \
+do {                        \
+  vga_out8 (0x3c4, index);  \
+  vga_out8 (0x3c5, val);    \
+} while (0)
+
+#define VGAenablePalette() \
+do {                       \
+  u8 tmp;                  \
+                           \
+  tmp = vga_in8 (0x3da);   \
+  vga_out8 (0x3c0, 0x00);  \
+  paletteEnabled = 1;      \
+} while (0)
+
+#define VGAdisablePalette() \
+do {                        \
+  u8 tmp;                   \
+                            \
+  tmp = vga_in8 (0x3da);    \
+  vga_out8 (0x3c0, 0x20);   \
+  paletteEnabled = 0;       \
+} while (0)
+
+#define VGAwATTR(index, value) \
+do {                           \
+  u8 tmp;                      \
+                               \
+  if (paletteEnabled)          \
+    index &= ~0x20;            \
+  else                         \
+    index |= 0x20;             \
+                               \
+  tmp = vga_in8 (0x3da);       \
+  vga_out8 (0x3c0, index);     \
+  vga_out8 (0x3c0, value);     \
+} while (0)
+
+#define VGAwMISC(value)    \
+do {                       \
+  vga_out8 (0x3c2, value); \
+} while (0)
+
+#ifndef CONFIG_FB_SAVAGE_ACCEL
+#define savagefb_set_clip(x)
+#endif
+
+#define VerticalRetraceWait() \
+{ \
+	vga_out8 (0x3d4, 0x17); \
+	if (vga_in8 (0x3d5) & 0x80) { \
+		while ((vga_in8(0x3da) & 0x08) == 0x08) ; \
+		while ((vga_in8(0x3da) & 0x08) == 0x00) ; \
+	} \
+}
+
+extern int savagefb_probe_i2c_connector(struct savagefb_par *par,
+					u8 **out_edid);
+extern void savagefb_create_i2c_busses(struct fb_info *info);
+extern void savagefb_delete_i2c_busses(struct fb_info *info);
+extern int  savagefb_sync(struct fb_info *info);
+extern void savagefb_copyarea(struct fb_info *info,
+			      const struct fb_copyarea *region);
+extern void savagefb_fillrect(struct fb_info *info,
+			      const struct fb_fillrect *rect);
+extern void savagefb_imageblit(struct fb_info *info,
+			       const struct fb_image *image);
+
+
+#endif /* __SAVAGEFB_H__ */
diff --git a/drivers/video/savage/savagefb_accel.c b/drivers/video/savage/savagefb_accel.c
new file mode 100644
index 000000000000..bac8ea3a0108
--- /dev/null
+++ b/drivers/video/savage/savagefb_accel.c
@@ -0,0 +1,136 @@
+/*-*- linux-c -*-
+ *  linux/drivers/video/savage/savage_accel.c -- Hardware Acceleration
+ *
+ *      Copyright (C) 2004 Antonino Daplas<adaplas@pol.net>
+ *      All Rights Reserved
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/fb.h>
+
+#include "savagefb.h"
+
+static u32 savagefb_rop[] = {
+	0xCC, /* ROP_COPY */
+	0x5A  /* ROP_XOR  */
+};
+
+int savagefb_sync(struct fb_info *info)
+{
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+
+	par->SavageWaitIdle(par);
+	return 0;
+}
+
+void savagefb_copyarea(struct fb_info *info, const struct fb_copyarea *region)
+{
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+	int sx = region->sx, dx = region->dx;
+	int sy = region->sy, dy = region->dy;
+	int cmd;
+
+	if (!region->width || !region->height)
+		return;
+	par->bci_ptr = 0;
+	cmd = BCI_CMD_RECT | BCI_CMD_DEST_GBD | BCI_CMD_SRC_GBD;
+	BCI_CMD_SET_ROP(cmd, savagefb_rop[0]);
+
+	if (dx <= sx) {
+		cmd |= BCI_CMD_RECT_XP;
+	} else {
+		sx += region->width - 1;
+		dx += region->width - 1;
+	}
+
+	if (dy <= sy) {
+		cmd |= BCI_CMD_RECT_YP;
+	} else {
+		sy += region->height - 1;
+		dy += region->height - 1;
+	}
+
+	par->SavageWaitFifo(par,4);
+	BCI_SEND(cmd);
+	BCI_SEND(BCI_X_Y(sx, sy));
+	BCI_SEND(BCI_X_Y(dx, dy));
+	BCI_SEND(BCI_W_H(region->width, region->height));
+}
+
+void savagefb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+	int cmd, color;
+
+	if (!rect->width || !rect->height)
+		return;
+
+	if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR)
+		color = rect->color;
+	else
+		color = ((u32 *)info->pseudo_palette)[rect->color];
+
+	cmd = BCI_CMD_RECT | BCI_CMD_RECT_XP | BCI_CMD_RECT_YP |
+	      BCI_CMD_DEST_GBD | BCI_CMD_SRC_SOLID |
+	      BCI_CMD_SEND_COLOR;
+
+	par->bci_ptr = 0;
+	BCI_CMD_SET_ROP(cmd, savagefb_rop[rect->rop]);
+
+	par->SavageWaitFifo(par,4);
+	BCI_SEND(cmd);
+	BCI_SEND(color);
+	BCI_SEND( BCI_X_Y(rect->dx, rect->dy) );
+	BCI_SEND( BCI_W_H(rect->width, rect->height) );
+}
+
+void savagefb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+	int fg, bg, size, i, width;
+	int cmd;
+	u32 *src = (u32 *) image->data;
+
+	if (!image->width || !image->height)
+		return;
+
+	if (image->depth != 1) {
+		cfb_imageblit(info, image);
+		return;
+	}
+
+	if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR) {
+		fg = image->fg_color;
+		bg = image->bg_color;
+	} else {
+		fg = ((u32 *)info->pseudo_palette)[image->fg_color];
+		bg = ((u32 *)info->pseudo_palette)[image->bg_color];
+	}
+
+	cmd = BCI_CMD_RECT | BCI_CMD_RECT_XP | BCI_CMD_RECT_YP |
+	      BCI_CMD_CLIP_LR | BCI_CMD_DEST_GBD | BCI_CMD_SRC_MONO |
+	      BCI_CMD_SEND_COLOR;
+
+	par->bci_ptr = 0;
+	BCI_CMD_SET_ROP(cmd, savagefb_rop[0]);
+
+	width = (image->width + 31) & ~31;
+	size = (width * image->height)/8;
+	size >>= 2;
+
+	par->SavageWaitFifo(par, size + 5);
+	BCI_SEND(cmd);
+	BCI_SEND(BCI_CLIP_LR(image->dx, image->dx + image->width - 1));
+	BCI_SEND(fg);
+	BCI_SEND(bg);
+	BCI_SEND(BCI_X_Y(image->dx, image->dy));
+	BCI_SEND(BCI_W_H(width, image->height));
+	for (i = 0; i < size; i++)
+		BCI_SEND(src[i]);
+}
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
new file mode 100644
index 000000000000..e1c9c946be2d
--- /dev/null
+++ b/drivers/video/savage/savagefb_driver.c
@@ -0,0 +1,2279 @@
+/*
+ * linux/drivers/video/savagefb.c -- S3 Savage Framebuffer Driver
+ *
+ * Copyright (c) 2001-2002  Denis Oliver Kropp <dok@directfb.org>
+ *                          Sven Neumann <neo@directfb.org>
+ *
+ *
+ * Card specific code is based on XFree86's savage driver.
+ * Framebuffer framework code is based on code of cyber2000fb and tdfxfb.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * 0.4.0 (neo)
+ *  - hardware accelerated clear and move
+ *
+ * 0.3.2 (dok)
+ *  - wait for vertical retrace before writing to cr67
+ *    at the beginning of savagefb_set_par
+ *  - use synchronization registers cr23 and cr26
+ *
+ * 0.3.1 (dok)
+ *  - reset 3D engine
+ *  - don't return alpha bits for 32bit format
+ *
+ * 0.3.0 (dok)
+ *  - added WaitIdle functions for all Savage types
+ *  - do WaitIdle before mode switching
+ *  - code cleanup
+ *
+ * 0.2.0 (dok)
+ *  - first working version
+ *
+ *
+ * TODO
+ * - clock validations in decode_var
+ *
+ * BUGS
+ * - white margin on bootup
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/console.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+
+#include "savagefb.h"
+
+
+#define SAVAGEFB_VERSION "0.4.0_2.6"
+
+/* --------------------------------------------------------------------- */
+
+
+static char *mode_option __initdata = NULL;
+static int   paletteEnabled = 0;
+
+#ifdef MODULE
+
+MODULE_AUTHOR("(c) 2001-2002  Denis Oliver Kropp <dok@directfb.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("FBDev driver for S3 Savage PCI/AGP Chips");
+
+#endif
+
+
+/* --------------------------------------------------------------------- */
+
+static void vgaHWSeqReset (struct savagefb_par *par, int start)
+{
+	if (start)
+		VGAwSEQ (0x00, 0x01);		/* Synchronous Reset */
+	else
+		VGAwSEQ (0x00, 0x03);		/* End Reset */
+}
+
+static void vgaHWProtect (struct savagefb_par *par, int on)
+{
+	unsigned char tmp;
+
+	if (on) {
+		/*
+		 * Turn off screen and disable sequencer.
+		 */
+		tmp = VGArSEQ (0x01);
+
+		vgaHWSeqReset (par, 1);	        /* start synchronous reset */
+		VGAwSEQ (0x01, tmp | 0x20);	/* disable the display */
+
+		VGAenablePalette();
+	} else {
+		/*
+		 * Reenable sequencer, then turn on screen.
+		 */
+
+		tmp = VGArSEQ (0x01);
+
+		VGAwSEQ (0x01, tmp & ~0x20);	/* reenable display */
+		vgaHWSeqReset (par, 0);	        /* clear synchronous reset */
+
+		VGAdisablePalette();
+	}
+}
+
+static void vgaHWRestore (struct savagefb_par  *par)
+{
+	int i;
+
+	VGAwMISC (par->MiscOutReg);
+
+	for (i = 1; i < 5; i++)
+		VGAwSEQ (i, par->Sequencer[i]);
+
+	/* Ensure CRTC registers 0-7 are unlocked by clearing bit 7 or
+	   CRTC[17] */
+	VGAwCR (17, par->CRTC[17] & ~0x80);
+
+	for (i = 0; i < 25; i++)
+		VGAwCR (i, par->CRTC[i]);
+
+	for (i = 0; i < 9; i++)
+		VGAwGR (i, par->Graphics[i]);
+
+	VGAenablePalette();
+
+	for (i = 0; i < 21; i++)
+		VGAwATTR (i, par->Attribute[i]);
+
+	VGAdisablePalette();
+}
+
+static void vgaHWInit (struct fb_var_screeninfo *var,
+		       struct savagefb_par            *par,
+		       struct xtimings                *timings)
+{
+	par->MiscOutReg = 0x23;
+
+	if (!(timings->sync & FB_SYNC_HOR_HIGH_ACT))
+		par->MiscOutReg |= 0x40;
+
+	if (!(timings->sync & FB_SYNC_VERT_HIGH_ACT))
+		par->MiscOutReg |= 0x80;
+
+	/*
+	 * Time Sequencer
+	 */
+	par->Sequencer[0x00] = 0x00;
+	par->Sequencer[0x01] = 0x01;
+	par->Sequencer[0x02] = 0x0F;
+	par->Sequencer[0x03] = 0x00;          /* Font select */
+	par->Sequencer[0x04] = 0x0E;          /* Misc */
+
+	/*
+	 * CRTC Controller
+	 */
+	par->CRTC[0x00] = (timings->HTotal >> 3) - 5;
+	par->CRTC[0x01] = (timings->HDisplay >> 3) - 1;
+	par->CRTC[0x02] = (timings->HSyncStart >> 3) - 1;
+	par->CRTC[0x03] = (((timings->HSyncEnd >> 3)  - 1) & 0x1f) | 0x80;
+	par->CRTC[0x04] = (timings->HSyncStart >> 3);
+	par->CRTC[0x05] = ((((timings->HSyncEnd >> 3) - 1) & 0x20) << 2) |
+		(((timings->HSyncEnd >> 3)) & 0x1f);
+	par->CRTC[0x06] = (timings->VTotal - 2) & 0xFF;
+	par->CRTC[0x07] = (((timings->VTotal - 2) & 0x100) >> 8) |
+		(((timings->VDisplay - 1) & 0x100) >> 7) |
+		((timings->VSyncStart & 0x100) >> 6) |
+		(((timings->VSyncStart - 1) & 0x100) >> 5) |
+		0x10 |
+		(((timings->VTotal - 2) & 0x200) >> 4) |
+		(((timings->VDisplay - 1) & 0x200) >> 3) |
+		((timings->VSyncStart & 0x200) >> 2);
+	par->CRTC[0x08] = 0x00;
+	par->CRTC[0x09] = (((timings->VSyncStart - 1) & 0x200) >> 4) | 0x40;
+
+	if (timings->dblscan)
+		par->CRTC[0x09] |= 0x80;
+
+	par->CRTC[0x0a] = 0x00;
+	par->CRTC[0x0b] = 0x00;
+	par->CRTC[0x0c] = 0x00;
+	par->CRTC[0x0d] = 0x00;
+	par->CRTC[0x0e] = 0x00;
+	par->CRTC[0x0f] = 0x00;
+	par->CRTC[0x10] = timings->VSyncStart & 0xff;
+	par->CRTC[0x11] = (timings->VSyncEnd & 0x0f) | 0x20;
+	par->CRTC[0x12] = (timings->VDisplay - 1) & 0xff;
+	par->CRTC[0x13] = var->xres_virtual >> 4;
+	par->CRTC[0x14] = 0x00;
+	par->CRTC[0x15] = (timings->VSyncStart - 1) & 0xff;
+	par->CRTC[0x16] = (timings->VSyncEnd - 1) & 0xff;
+	par->CRTC[0x17] = 0xc3;
+	par->CRTC[0x18] = 0xff;
+
+	/*
+	 * are these unnecessary?
+	 * vgaHWHBlankKGA(mode, regp, 0, KGA_FIX_OVERSCAN|KGA_ENABLE_ON_ZERO);
+	 * vgaHWVBlankKGA(mode, regp, 0, KGA_FIX_OVERSCAN|KGA_ENABLE_ON_ZERO);
+	 */
+
+	/*
+	 * Graphics Display Controller
+	 */
+	par->Graphics[0x00] = 0x00;
+	par->Graphics[0x01] = 0x00;
+	par->Graphics[0x02] = 0x00;
+	par->Graphics[0x03] = 0x00;
+	par->Graphics[0x04] = 0x00;
+	par->Graphics[0x05] = 0x40;
+	par->Graphics[0x06] = 0x05;   /* only map 64k VGA memory !!!! */
+	par->Graphics[0x07] = 0x0F;
+	par->Graphics[0x08] = 0xFF;
+
+
+	par->Attribute[0x00]  = 0x00; /* standard colormap translation */
+	par->Attribute[0x01]  = 0x01;
+	par->Attribute[0x02]  = 0x02;
+	par->Attribute[0x03]  = 0x03;
+	par->Attribute[0x04]  = 0x04;
+	par->Attribute[0x05]  = 0x05;
+	par->Attribute[0x06]  = 0x06;
+	par->Attribute[0x07]  = 0x07;
+	par->Attribute[0x08]  = 0x08;
+	par->Attribute[0x09]  = 0x09;
+	par->Attribute[0x0a] = 0x0A;
+	par->Attribute[0x0b] = 0x0B;
+	par->Attribute[0x0c] = 0x0C;
+	par->Attribute[0x0d] = 0x0D;
+	par->Attribute[0x0e] = 0x0E;
+	par->Attribute[0x0f] = 0x0F;
+	par->Attribute[0x10] = 0x41;
+	par->Attribute[0x11] = 0xFF;
+	par->Attribute[0x12] = 0x0F;
+	par->Attribute[0x13] = 0x00;
+	par->Attribute[0x14] = 0x00;
+}
+
+/* -------------------- Hardware specific routines ------------------------- */
+
+/*
+ * Hardware Acceleration for SavageFB
+ */
+
+/* Wait for fifo space */
+static void
+savage3D_waitfifo(struct savagefb_par *par, int space)
+{
+	int slots = MAXFIFO - space;
+
+	while ((savage_in32(0x48C00) & 0x0000ffff) > slots);
+}
+
+static void
+savage4_waitfifo(struct savagefb_par *par, int space)
+{
+	int slots = MAXFIFO - space;
+
+	while ((savage_in32(0x48C60) & 0x001fffff) > slots);
+}
+
+static void
+savage2000_waitfifo(struct savagefb_par *par, int space)
+{
+	int slots = MAXFIFO - space;
+
+	while ((savage_in32(0x48C60) & 0x0000ffff) > slots);
+}
+
+/* Wait for idle accelerator */
+static void
+savage3D_waitidle(struct savagefb_par *par)
+{
+	while ((savage_in32(0x48C00) & 0x0008ffff) != 0x80000);
+}
+
+static void
+savage4_waitidle(struct savagefb_par *par)
+{
+	while ((savage_in32(0x48C60) & 0x00a00000) != 0x00a00000);
+}
+
+static void
+savage2000_waitidle(struct savagefb_par *par)
+{
+	while ((savage_in32(0x48C60) & 0x009fffff));
+}
+
+
+static void
+SavageSetup2DEngine (struct savagefb_par  *par)
+{
+	unsigned long GlobalBitmapDescriptor;
+
+	GlobalBitmapDescriptor = 1 | 8 | BCI_BD_BW_DISABLE;
+	BCI_BD_SET_BPP (GlobalBitmapDescriptor, par->depth);
+	BCI_BD_SET_STRIDE (GlobalBitmapDescriptor, par->vwidth);
+
+	switch(par->chip) {
+	case S3_SAVAGE3D:
+	case S3_SAVAGE_MX:
+		/* Disable BCI */
+		savage_out32(0x48C18, savage_in32(0x48C18) & 0x3FF0);
+		/* Setup BCI command overflow buffer */
+		savage_out32(0x48C14, (par->cob_offset >> 11) | (par->cob_index << 29));
+		/* Program shadow status update. */
+		savage_out32(0x48C10, 0x78207220);
+		savage_out32(0x48C0C, 0);
+		/* Enable BCI and command overflow buffer */
+		savage_out32(0x48C18, savage_in32(0x48C18) | 0x0C);
+		break;
+	case S3_SAVAGE4:
+	case S3_PROSAVAGE:
+	case S3_SUPERSAVAGE:
+		/* Disable BCI */
+		savage_out32(0x48C18, savage_in32(0x48C18) & 0x3FF0);
+		/* Program shadow status update */
+		savage_out32(0x48C10, 0x00700040);
+		savage_out32(0x48C0C, 0);
+		/* Enable BCI without the COB */
+		savage_out32(0x48C18, savage_in32(0x48C18) | 0x08);
+		break;
+	case S3_SAVAGE2000:
+		/* Disable BCI */
+		savage_out32(0x48C18, 0);
+		/* Setup BCI command overflow buffer */
+		savage_out32(0x48C18, (par->cob_offset >> 7) | (par->cob_index));
+		/* Disable shadow status update */
+		savage_out32(0x48A30, 0);
+		/* Enable BCI and command overflow buffer */
+		savage_out32(0x48C18, savage_in32(0x48C18) | 0x00280000 );
+		break;
+	    default:
+		break;
+	}
+	/* Turn on 16-bit register access. */
+	vga_out8(0x3d4, 0x31);
+	vga_out8(0x3d5, 0x0c);
+
+	/* Set stride to use GBD. */
+	vga_out8 (0x3d4, 0x50);
+	vga_out8 (0x3d5, vga_in8 (0x3d5 ) | 0xC1);
+
+	/* Enable 2D engine. */
+	vga_out8 (0x3d4, 0x40 );
+	vga_out8 (0x3d5, 0x01 );
+
+	savage_out32 (MONO_PAT_0, ~0);
+	savage_out32 (MONO_PAT_1, ~0);
+
+	/* Setup plane masks */
+	savage_out32 (0x8128, ~0 ); /* enable all write planes */
+	savage_out32 (0x812C, ~0 ); /* enable all read planes */
+	savage_out16 (0x8134, 0x27 );
+	savage_out16 (0x8136, 0x07 );
+
+	/* Now set the GBD */
+	par->bci_ptr = 0;
+	par->SavageWaitFifo (par, 4);
+
+	BCI_SEND( BCI_CMD_SETREG | (1 << 16) | BCI_GBD1 );
+	BCI_SEND( 0 );
+	BCI_SEND( BCI_CMD_SETREG | (1 << 16) | BCI_GBD2 );
+	BCI_SEND( GlobalBitmapDescriptor );
+}
+
+
+static void SavageCalcClock(long freq, int min_m, int min_n1, int max_n1,
+			    int min_n2, int max_n2, long freq_min,
+			    long freq_max, unsigned int *mdiv,
+			    unsigned int *ndiv, unsigned int *r)
+{
+	long diff, best_diff;
+	unsigned int m;
+	unsigned char n1, n2, best_n1=16+2, best_n2=2, best_m=125+2;
+
+	if (freq < freq_min / (1 << max_n2)) {
+		printk (KERN_ERR "invalid frequency %ld Khz\n", freq);
+		freq = freq_min / (1 << max_n2);
+	}
+	if (freq > freq_max / (1 << min_n2)) {
+		printk (KERN_ERR "invalid frequency %ld Khz\n", freq);
+		freq = freq_max / (1 << min_n2);
+	}
+
+	/* work out suitable timings */
+	best_diff = freq;
+
+	for (n2=min_n2; n2<=max_n2; n2++) {
+		for (n1=min_n1+2; n1<=max_n1+2; n1++) {
+			m = (freq * n1 * (1 << n2) + HALF_BASE_FREQ) /
+				BASE_FREQ;
+			if (m < min_m+2 || m > 127+2)
+				continue;
+			if ((m * BASE_FREQ >= freq_min * n1) &&
+			    (m * BASE_FREQ <= freq_max * n1)) {
+				diff = freq * (1 << n2) * n1 - BASE_FREQ * m;
+				if (diff < 0)
+					diff = -diff;
+				if (diff < best_diff) {
+					best_diff = diff;
+					best_m = m;
+					best_n1 = n1;
+					best_n2 = n2;
+				}
+			}
+		}
+	}
+
+	*ndiv = best_n1 - 2;
+	*r = best_n2;
+	*mdiv = best_m - 2;
+}
+
+static int common_calc_clock(long freq, int min_m, int min_n1, int max_n1,
+			     int min_n2, int max_n2, long freq_min,
+			     long freq_max, unsigned char *mdiv,
+			     unsigned char *ndiv)
+{
+	long diff, best_diff;
+	unsigned int m;
+	unsigned char n1, n2;
+	unsigned char best_n1 = 16+2, best_n2 = 2, best_m = 125+2;
+
+	best_diff = freq;
+
+	for (n2 = min_n2; n2 <= max_n2; n2++) {
+		for (n1 = min_n1+2; n1 <= max_n1+2; n1++) {
+			m = (freq * n1 * (1 << n2) + HALF_BASE_FREQ) /
+				BASE_FREQ;
+			if (m < min_m + 2 || m > 127+2)
+				continue;
+			if((m * BASE_FREQ >= freq_min * n1) &&
+			   (m * BASE_FREQ <= freq_max * n1)) {
+				diff = freq * (1 << n2) * n1 - BASE_FREQ * m;
+				if(diff < 0)
+					diff = -diff;
+				if(diff < best_diff) {
+					best_diff = diff;
+					best_m = m;
+					best_n1 = n1;
+					best_n2 = n2;
+				}
+			}
+		}
+	}
+
+	if(max_n1 == 63)
+		*ndiv = (best_n1 - 2) | (best_n2 << 6);
+	else
+		*ndiv = (best_n1 - 2) | (best_n2 << 5);
+
+	*mdiv = best_m - 2;
+
+	return 0;
+}
+
+#ifdef SAVAGEFB_DEBUG
+/* This function is used to debug, it prints out the contents of s3 regs */
+
+static void SavagePrintRegs(void)
+{
+	unsigned char i;
+	int vgaCRIndex = 0x3d4;
+	int vgaCRReg = 0x3d5;
+
+	printk(KERN_DEBUG "SR    x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE "
+	       "xF" );
+
+	for( i = 0; i < 0x70; i++ ) {
+		if( !(i % 16) )
+			printk(KERN_DEBUG "\nSR%xx ", i >> 4 );
+		vga_out8( 0x3c4, i );
+		printk(KERN_DEBUG " %02x", vga_in8(0x3c5) );
+	}
+
+	printk(KERN_DEBUG "\n\nCR    x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC "
+	       "xD xE xF" );
+
+	for( i = 0; i < 0xB7; i++ ) {
+		if( !(i % 16) )
+			printk(KERN_DEBUG "\nCR%xx ", i >> 4 );
+		vga_out8( vgaCRIndex, i );
+		printk(KERN_DEBUG " %02x", vga_in8(vgaCRReg) );
+	}
+
+	printk(KERN_DEBUG "\n\n");
+}
+#endif
+
+/* --------------------------------------------------------------------- */
+
+static void savage_get_default_par(struct savagefb_par *par)
+{
+	unsigned char cr3a, cr53, cr66;
+
+	vga_out16 (0x3d4, 0x4838);
+	vga_out16 (0x3d4, 0xa039);
+	vga_out16 (0x3c4, 0x0608);
+
+	vga_out8 (0x3d4, 0x66);
+	cr66 = vga_in8 (0x3d5);
+	vga_out8 (0x3d5, cr66 | 0x80);
+	vga_out8 (0x3d4, 0x3a);
+	cr3a = vga_in8 (0x3d5);
+	vga_out8 (0x3d5, cr3a | 0x80);
+	vga_out8 (0x3d4, 0x53);
+	cr53 = vga_in8 (0x3d5);
+	vga_out8 (0x3d5, cr53 & 0x7f);
+
+	vga_out8 (0x3d4, 0x66);
+	vga_out8 (0x3d5, cr66);
+	vga_out8 (0x3d4, 0x3a);
+	vga_out8 (0x3d5, cr3a);
+
+	vga_out8 (0x3d4, 0x66);
+	vga_out8 (0x3d5, cr66);
+	vga_out8 (0x3d4, 0x3a);
+	vga_out8 (0x3d5, cr3a);
+
+	/* unlock extended seq regs */
+	vga_out8 (0x3c4, 0x08);
+	par->SR08 = vga_in8 (0x3c5);
+	vga_out8 (0x3c5, 0x06);
+
+	/* now save all the extended regs we need */
+	vga_out8 (0x3d4, 0x31);
+	par->CR31 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x32);
+	par->CR32 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x34);
+	par->CR34 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x36);
+	par->CR36 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x3a);
+	par->CR3A = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x40);
+	par->CR40 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x42);
+	par->CR42 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x45);
+	par->CR45 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x50);
+	par->CR50 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x51);
+	par->CR51 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x53);
+	par->CR53 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x58);
+	par->CR58 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x60);
+	par->CR60 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x66);
+	par->CR66 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x67);
+	par->CR67 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x68);
+	par->CR68 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x69);
+	par->CR69 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x6f);
+	par->CR6F = vga_in8 (0x3d5);
+
+	vga_out8 (0x3d4, 0x33);
+	par->CR33 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x86);
+	par->CR86 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x88);
+	par->CR88 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x90);
+	par->CR90 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x91);
+	par->CR91 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0xb0);
+	par->CRB0 = vga_in8 (0x3d5) | 0x80;
+
+	/* extended mode timing regs */
+	vga_out8 (0x3d4, 0x3b);
+	par->CR3B = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x3c);
+	par->CR3C = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x43);
+	par->CR43 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x5d);
+	par->CR5D = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x5e);
+	par->CR5E = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x65);
+	par->CR65 = vga_in8 (0x3d5);
+
+	/* save seq extended regs for DCLK PLL programming */
+	vga_out8 (0x3c4, 0x0e);
+	par->SR0E = vga_in8 (0x3c5);
+	vga_out8 (0x3c4, 0x0f);
+	par->SR0F = vga_in8 (0x3c5);
+	vga_out8 (0x3c4, 0x10);
+	par->SR10 = vga_in8 (0x3c5);
+	vga_out8 (0x3c4, 0x11);
+	par->SR11 = vga_in8 (0x3c5);
+	vga_out8 (0x3c4, 0x12);
+	par->SR12 = vga_in8 (0x3c5);
+	vga_out8 (0x3c4, 0x13);
+	par->SR13 = vga_in8 (0x3c5);
+	vga_out8 (0x3c4, 0x29);
+	par->SR29 = vga_in8 (0x3c5);
+
+	vga_out8 (0x3c4, 0x15);
+	par->SR15 = vga_in8 (0x3c5);
+	vga_out8 (0x3c4, 0x30);
+	par->SR30 = vga_in8 (0x3c5);
+	vga_out8 (0x3c4, 0x18);
+	par->SR18 = vga_in8 (0x3c5);
+
+	/* Save flat panel expansion regsters. */
+	if (par->chip == S3_SAVAGE_MX) {
+		int i;
+
+		for (i = 0; i < 8; i++) {
+			vga_out8 (0x3c4, 0x54+i);
+			par->SR54[i] = vga_in8 (0x3c5);
+		}
+	}
+
+	vga_out8 (0x3d4, 0x66);
+	cr66 = vga_in8 (0x3d5);
+	vga_out8 (0x3d5, cr66 | 0x80);
+	vga_out8 (0x3d4, 0x3a);
+	cr3a = vga_in8 (0x3d5);
+	vga_out8 (0x3d5, cr3a | 0x80);
+
+	/* now save MIU regs */
+	if (par->chip != S3_SAVAGE_MX) {
+		par->MMPR0 = savage_in32(FIFO_CONTROL_REG);
+		par->MMPR1 = savage_in32(MIU_CONTROL_REG);
+		par->MMPR2 = savage_in32(STREAMS_TIMEOUT_REG);
+		par->MMPR3 = savage_in32(MISC_TIMEOUT_REG);
+	}
+
+	vga_out8 (0x3d4, 0x3a);
+	vga_out8 (0x3d5, cr3a);
+	vga_out8 (0x3d4, 0x66);
+	vga_out8 (0x3d5, cr66);
+}
+
+static void savage_update_var(struct fb_var_screeninfo *var, struct fb_videomode *modedb)
+{
+	var->xres = var->xres_virtual = modedb->xres;
+	var->yres = modedb->yres;
+        if (var->yres_virtual < var->yres)
+	    var->yres_virtual = var->yres;
+        var->xoffset = var->yoffset = 0;
+        var->pixclock = modedb->pixclock;
+        var->left_margin = modedb->left_margin;
+        var->right_margin = modedb->right_margin;
+        var->upper_margin = modedb->upper_margin;
+        var->lower_margin = modedb->lower_margin;
+        var->hsync_len = modedb->hsync_len;
+        var->vsync_len = modedb->vsync_len;
+        var->sync = modedb->sync;
+        var->vmode = modedb->vmode;
+}
+
+static int savagefb_check_var (struct fb_var_screeninfo   *var,
+			       struct fb_info *info)
+{
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+	int memlen, vramlen, mode_valid = 0;
+
+	DBG("savagefb_check_var");
+
+	var->transp.offset = 0;
+	var->transp.length = 0;
+	switch (var->bits_per_pixel) {
+	case 8:
+		var->red.offset = var->green.offset =
+			var->blue.offset = 0;
+		var->red.length = var->green.length =
+			var->blue.length = var->bits_per_pixel;
+		break;
+	case 16:
+		var->red.offset = 11;
+		var->red.length = 5;
+		var->green.offset = 5;
+		var->green.length = 6;
+		var->blue.offset = 0;
+		var->blue.length = 5;
+		break;
+	case 32:
+		var->transp.offset = 24;
+		var->transp.length = 8;
+		var->red.offset = 16;
+		var->red.length = 8;
+		var->green.offset = 8;
+		var->green.length = 8;
+		var->blue.offset = 0;
+		var->blue.length = 8;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (!info->monspecs.hfmax || !info->monspecs.vfmax ||
+	    !info->monspecs.dclkmax || !fb_validate_mode(var, info))
+		mode_valid = 1;
+
+	/* calculate modeline if supported by monitor */
+	if (!mode_valid && info->monspecs.gtf) {
+		if (!fb_get_mode(FB_MAXTIMINGS, 0, var, info))
+			mode_valid = 1;
+	}
+
+	if (!mode_valid) {
+		struct fb_videomode *mode;
+
+		mode = fb_find_best_mode(var, &info->modelist);
+		if (mode) {
+			savage_update_var(var, mode);
+			mode_valid = 1;
+		}
+	}
+
+	if (!mode_valid && info->monspecs.modedb_len)
+		return -EINVAL;
+
+	/* Is the mode larger than the LCD panel? */
+	if (par->SavagePanelWidth &&
+	    (var->xres > par->SavagePanelWidth ||
+	     var->yres > par->SavagePanelHeight)) {
+		printk (KERN_INFO "Mode (%dx%d) larger than the LCD panel "
+			"(%dx%d)\n", var->xres,  var->yres,
+			par->SavagePanelWidth,
+			par->SavagePanelHeight);
+		return -1;
+	}
+
+	if (var->yres_virtual < var->yres)
+		var->yres_virtual = var->yres;
+	if (var->xres_virtual < var->xres)
+		var->xres_virtual = var->xres;
+
+	vramlen = info->fix.smem_len;
+
+	memlen = var->xres_virtual * var->bits_per_pixel *
+		var->yres_virtual / 8;
+	if (memlen > vramlen) {
+		var->yres_virtual = vramlen * 8 /
+			(var->xres_virtual * var->bits_per_pixel);
+		memlen = var->xres_virtual * var->bits_per_pixel *
+			var->yres_virtual / 8;
+	}
+
+	/* we must round yres/xres down, we already rounded y/xres_virtual up
+	   if it was possible. We should return -EINVAL, but I disagree */
+	if (var->yres_virtual < var->yres)
+		var->yres = var->yres_virtual;
+	if (var->xres_virtual < var->xres)
+		var->xres = var->xres_virtual;
+	if (var->xoffset + var->xres > var->xres_virtual)
+		var->xoffset = var->xres_virtual - var->xres;
+	if (var->yoffset + var->yres > var->yres_virtual)
+		var->yoffset = var->yres_virtual - var->yres;
+
+	return 0;
+}
+
+
+static int savagefb_decode_var (struct fb_var_screeninfo   *var,
+				struct savagefb_par        *par)
+{
+	struct xtimings timings;
+	int width, dclk, i, j; /*, refresh; */
+	unsigned int m, n, r;
+	unsigned char tmp = 0;
+	unsigned int pixclock = var->pixclock;
+
+	DBG("savagefb_decode_var");
+
+	memset (&timings, 0, sizeof(timings));
+
+	if (!pixclock) pixclock = 10000;	/* 10ns = 100MHz */
+	timings.Clock = 1000000000 / pixclock;
+	if (timings.Clock < 1) timings.Clock = 1;
+	timings.dblscan = var->vmode & FB_VMODE_DOUBLE;
+	timings.interlaced = var->vmode & FB_VMODE_INTERLACED;
+	timings.HDisplay = var->xres;
+	timings.HSyncStart = timings.HDisplay + var->right_margin;
+	timings.HSyncEnd = timings.HSyncStart + var->hsync_len;
+	timings.HTotal = timings.HSyncEnd + var->left_margin;
+	timings.VDisplay = var->yres;
+	timings.VSyncStart = timings.VDisplay + var->lower_margin;
+	timings.VSyncEnd = timings.VSyncStart + var->vsync_len;
+	timings.VTotal = timings.VSyncEnd + var->upper_margin;
+	timings.sync = var->sync;
+
+
+	par->depth  = var->bits_per_pixel;
+	par->vwidth = var->xres_virtual;
+
+	if (var->bits_per_pixel == 16  &&  par->chip == S3_SAVAGE3D) {
+		timings.HDisplay *= 2;
+		timings.HSyncStart *= 2;
+		timings.HSyncEnd *= 2;
+		timings.HTotal *= 2;
+	}
+
+	/*
+	 * This will allocate the datastructure and initialize all of the
+	 * generic VGA registers.
+	 */
+	vgaHWInit (var, par, &timings);
+
+	/* We need to set CR67 whether or not we use the BIOS. */
+
+	dclk = timings.Clock;
+	par->CR67 = 0x00;
+
+	switch( var->bits_per_pixel ) {
+	case 8:
+		if( (par->chip == S3_SAVAGE2000) && (dclk >= 230000) )
+			par->CR67 = 0x10;	/* 8bpp, 2 pixels/clock */
+		else
+			par->CR67 = 0x00;	/* 8bpp, 1 pixel/clock */
+		break;
+	case 15:
+		if ( S3_SAVAGE_MOBILE_SERIES(par->chip) ||
+		     ((par->chip == S3_SAVAGE2000) && (dclk >= 230000)) )
+			par->CR67 = 0x30;	/* 15bpp, 2 pixel/clock */
+		else
+			par->CR67 = 0x20;	/* 15bpp, 1 pixels/clock */
+		break;
+	case 16:
+		if( S3_SAVAGE_MOBILE_SERIES(par->chip) ||
+		    ((par->chip == S3_SAVAGE2000) && (dclk >= 230000)) )
+			par->CR67 = 0x50;	/* 16bpp, 2 pixel/clock */
+		else
+			par->CR67 = 0x40;	/* 16bpp, 1 pixels/clock */
+		break;
+	case 24:
+		par->CR67 = 0x70;
+		break;
+	case 32:
+		par->CR67 = 0xd0;
+		break;
+	}
+
+	/*
+	 * Either BIOS use is disabled, or we failed to find a suitable
+	 * match.  Fall back to traditional register-crunching.
+	 */
+
+	vga_out8 (0x3d4, 0x3a);
+	tmp = vga_in8 (0x3d5);
+	if (1 /*FIXME:psav->pci_burst*/)
+		par->CR3A = (tmp & 0x7f) | 0x15;
+	else
+		par->CR3A = tmp | 0x95;
+
+	par->CR53 = 0x00;
+	par->CR31 = 0x8c;
+	par->CR66 = 0x89;
+
+	vga_out8 (0x3d4, 0x58);
+	par->CR58 = vga_in8 (0x3d5) & 0x80;
+	par->CR58 |= 0x13;
+
+	par->SR15 = 0x03 | 0x80;
+	par->SR18 = 0x00;
+	par->CR43 = par->CR45 = par->CR65 = 0x00;
+
+	vga_out8 (0x3d4, 0x40);
+	par->CR40 = vga_in8 (0x3d5) & ~0x01;
+
+	par->MMPR0 = 0x010400;
+	par->MMPR1 = 0x00;
+	par->MMPR2 = 0x0808;
+	par->MMPR3 = 0x08080810;
+
+	SavageCalcClock (dclk, 1, 1, 127, 0, 4, 180000, 360000, &m, &n, &r);
+	/* m = 107; n = 4; r = 2; */
+
+	if (par->MCLK <= 0) {
+		par->SR10 = 255;
+		par->SR11 = 255;
+	} else {
+		common_calc_clock (par->MCLK, 1, 1, 31, 0, 3, 135000, 270000,
+				   &par->SR11, &par->SR10);
+		/*      par->SR10 = 80; // MCLK == 286000 */
+		/*      par->SR11 = 125; */
+	}
+
+	par->SR12 = (r << 6) | (n & 0x3f);
+	par->SR13 = m & 0xff;
+	par->SR29 = (r & 4) | (m & 0x100) >> 5 | (n & 0x40) >> 2;
+
+	if (var->bits_per_pixel < 24)
+		par->MMPR0 -= 0x8000;
+	else
+		par->MMPR0 -= 0x4000;
+
+	if (timings.interlaced)
+		par->CR42 = 0x20;
+	else
+		par->CR42 = 0x00;
+
+	par->CR34 = 0x10; /* display fifo */
+
+	i = ((((timings.HTotal >> 3) - 5) & 0x100) >> 8) |
+		((((timings.HDisplay >> 3) - 1) & 0x100) >> 7) |
+		((((timings.HSyncStart >> 3) - 1) & 0x100) >> 6) |
+		((timings.HSyncStart & 0x800) >> 7);
+
+	if ((timings.HSyncEnd >> 3) - (timings.HSyncStart >> 3) > 64)
+		i |= 0x08;
+	if ((timings.HSyncEnd >> 3) - (timings.HSyncStart >> 3) > 32)
+		i |= 0x20;
+
+	j = (par->CRTC[0] + ((i & 0x01) << 8) +
+	     par->CRTC[4] + ((i & 0x10) << 4) + 1) / 2;
+
+	if (j - (par->CRTC[4] + ((i & 0x10) << 4)) < 4) {
+		if (par->CRTC[4] + ((i & 0x10) << 4) + 4 <=
+		    par->CRTC[0] + ((i & 0x01) << 8))
+			j = par->CRTC[4] + ((i & 0x10) << 4) + 4;
+		else
+			j = par->CRTC[0] + ((i & 0x01) << 8) + 1;
+	}
+
+	par->CR3B = j & 0xff;
+	i |= (j & 0x100) >> 2;
+	par->CR3C = (par->CRTC[0] + ((i & 0x01) << 8)) / 2;
+	par->CR5D = i;
+	par->CR5E = (((timings.VTotal - 2) & 0x400) >> 10) |
+		(((timings.VDisplay - 1) & 0x400) >> 9) |
+		(((timings.VSyncStart) & 0x400) >> 8) |
+		(((timings.VSyncStart) & 0x400) >> 6) | 0x40;
+	width = (var->xres_virtual * ((var->bits_per_pixel+7) / 8)) >> 3;
+	par->CR91 = par->CRTC[19] = 0xff & width;
+	par->CR51 = (0x300 & width) >> 4;
+	par->CR90 = 0x80 | (width >> 8);
+	par->MiscOutReg |= 0x0c;
+
+	/* Set frame buffer description. */
+
+	if (var->bits_per_pixel <= 8)
+		par->CR50 = 0;
+	else if (var->bits_per_pixel <= 16)
+		par->CR50 = 0x10;
+	else
+		par->CR50 = 0x30;
+
+	if (var->xres_virtual <= 640)
+		par->CR50 |= 0x40;
+	else if (var->xres_virtual == 800)
+		par->CR50 |= 0x80;
+	else if (var->xres_virtual == 1024)
+		par->CR50 |= 0x00;
+	else if (var->xres_virtual == 1152)
+		par->CR50 |= 0x01;
+	else if (var->xres_virtual == 1280)
+		par->CR50 |= 0xc0;
+	else if (var->xres_virtual == 1600)
+		par->CR50 |= 0x81;
+	else
+		par->CR50 |= 0xc1;	/* Use GBD */
+
+	if( par->chip == S3_SAVAGE2000 )
+		par->CR33 = 0x08;
+	else
+		par->CR33 = 0x20;
+
+	par->CRTC[0x17] = 0xeb;
+
+	par->CR67 |= 1;
+
+	vga_out8(0x3d4, 0x36);
+	par->CR36 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x68);
+	par->CR68 = vga_in8 (0x3d5);
+	par->CR69 = 0;
+	vga_out8 (0x3d4, 0x6f);
+	par->CR6F = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x86);
+	par->CR86 = vga_in8 (0x3d5);
+	vga_out8 (0x3d4, 0x88);
+	par->CR88 = vga_in8 (0x3d5) | 0x08;
+	vga_out8 (0x3d4, 0xb0);
+	par->CRB0 = vga_in8 (0x3d5) | 0x80;
+
+	return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+/*
+ *    Set a single color register. Return != 0 for invalid regno.
+ */
+static int savagefb_setcolreg(unsigned        regno,
+			      unsigned        red,
+			      unsigned        green,
+			      unsigned        blue,
+			      unsigned        transp,
+			      struct fb_info *info)
+{
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+
+	if (regno >= NR_PALETTE)
+		return -EINVAL;
+
+	par->palette[regno].red    = red;
+	par->palette[regno].green  = green;
+	par->palette[regno].blue   = blue;
+	par->palette[regno].transp = transp;
+
+	switch (info->var.bits_per_pixel) {
+	case 8:
+		vga_out8 (0x3c8, regno);
+
+		vga_out8 (0x3c9, red   >> 10);
+		vga_out8 (0x3c9, green >> 10);
+		vga_out8 (0x3c9, blue  >> 10);
+		break;
+
+	case 16:
+		if (regno < 16)
+			((u32 *)info->pseudo_palette)[regno] =
+				((red   & 0xf800)      ) |
+				((green & 0xfc00) >>  5) |
+				((blue  & 0xf800) >> 11);
+		break;
+
+	case 24:
+		if (regno < 16)
+			((u32 *)info->pseudo_palette)[regno] =
+				((red    & 0xff00) <<  8) |
+				((green  & 0xff00)      ) |
+				((blue   & 0xff00) >>  8);
+		break;
+	case 32:
+		if (regno < 16)
+			((u32 *)info->pseudo_palette)[regno] =
+				((transp & 0xff00) << 16) |
+				((red    & 0xff00) <<  8) |
+				((green  & 0xff00)      ) |
+				((blue   & 0xff00) >>  8);
+		break;
+
+	default:
+		return 1;
+	}
+
+	return 0;
+}
+
+static void savagefb_set_par_int (struct savagefb_par  *par)
+{
+	unsigned char tmp, cr3a, cr66, cr67;
+
+	DBG ("savagefb_set_par_int");
+
+	par->SavageWaitIdle (par);
+
+	vga_out8 (0x3c2, 0x23);
+
+	vga_out16 (0x3d4, 0x4838);
+	vga_out16 (0x3d4, 0xa539);
+	vga_out16 (0x3c4, 0x0608);
+
+	vgaHWProtect (par, 1);
+
+	/*
+	 * Some Savage/MX and /IX systems go nuts when trying to exit the
+	 * server after WindowMaker has displayed a gradient background.  I
+	 * haven't been able to find what causes it, but a non-destructive
+	 * switch to mode 3 here seems to eliminate the issue.
+	 */
+
+	VerticalRetraceWait();
+	vga_out8 (0x3d4, 0x67);
+	cr67 = vga_in8 (0x3d5);
+	vga_out8 (0x3d5, cr67/*par->CR67*/ & ~0x0c); /* no STREAMS yet */
+
+	vga_out8 (0x3d4, 0x23);
+	vga_out8 (0x3d5, 0x00);
+	vga_out8 (0x3d4, 0x26);
+	vga_out8 (0x3d5, 0x00);
+
+	/* restore extended regs */
+	vga_out8 (0x3d4, 0x66);
+	vga_out8 (0x3d5, par->CR66);
+	vga_out8 (0x3d4, 0x3a);
+	vga_out8 (0x3d5, par->CR3A);
+	vga_out8 (0x3d4, 0x31);
+	vga_out8 (0x3d5, par->CR31);
+	vga_out8 (0x3d4, 0x32);
+	vga_out8 (0x3d5, par->CR32);
+	vga_out8 (0x3d4, 0x58);
+	vga_out8 (0x3d5, par->CR58);
+	vga_out8 (0x3d4, 0x53);
+	vga_out8 (0x3d5, par->CR53 & 0x7f);
+
+	vga_out16 (0x3c4, 0x0608);
+
+	/* Restore DCLK registers. */
+
+	vga_out8 (0x3c4, 0x0e);
+	vga_out8 (0x3c5, par->SR0E);
+	vga_out8 (0x3c4, 0x0f);
+	vga_out8 (0x3c5, par->SR0F);
+	vga_out8 (0x3c4, 0x29);
+	vga_out8 (0x3c5, par->SR29);
+	vga_out8 (0x3c4, 0x15);
+	vga_out8 (0x3c5, par->SR15);
+
+	/* Restore flat panel expansion regsters. */
+	if( par->chip == S3_SAVAGE_MX ) {
+		int i;
+
+		for( i = 0; i < 8; i++ ) {
+			vga_out8 (0x3c4, 0x54+i);
+			vga_out8 (0x3c5, par->SR54[i]);
+		}
+	}
+
+	vgaHWRestore (par);
+
+	/* extended mode timing registers */
+	vga_out8 (0x3d4, 0x53);
+	vga_out8 (0x3d5, par->CR53);
+	vga_out8 (0x3d4, 0x5d);
+	vga_out8 (0x3d5, par->CR5D);
+	vga_out8 (0x3d4, 0x5e);
+	vga_out8 (0x3d5, par->CR5E);
+	vga_out8 (0x3d4, 0x3b);
+	vga_out8 (0x3d5, par->CR3B);
+	vga_out8 (0x3d4, 0x3c);
+	vga_out8 (0x3d5, par->CR3C);
+	vga_out8 (0x3d4, 0x43);
+	vga_out8 (0x3d5, par->CR43);
+	vga_out8 (0x3d4, 0x65);
+	vga_out8 (0x3d5, par->CR65);
+
+	/* restore the desired video mode with cr67 */
+	vga_out8 (0x3d4, 0x67);
+	/* following part not present in X11 driver */
+	cr67 = vga_in8 (0x3d5) & 0xf;
+	vga_out8 (0x3d5, 0x50 | cr67);
+	udelay (10000);
+	vga_out8 (0x3d4, 0x67);
+	/* end of part */
+	vga_out8 (0x3d5, par->CR67 & ~0x0c);
+
+	/* other mode timing and extended regs */
+	vga_out8 (0x3d4, 0x34);
+	vga_out8 (0x3d5, par->CR34);
+	vga_out8 (0x3d4, 0x40);
+	vga_out8 (0x3d5, par->CR40);
+	vga_out8 (0x3d4, 0x42);
+	vga_out8 (0x3d5, par->CR42);
+	vga_out8 (0x3d4, 0x45);
+	vga_out8 (0x3d5, par->CR45);
+	vga_out8 (0x3d4, 0x50);
+	vga_out8 (0x3d5, par->CR50);
+	vga_out8 (0x3d4, 0x51);
+	vga_out8 (0x3d5, par->CR51);
+
+	/* memory timings */
+	vga_out8 (0x3d4, 0x36);
+	vga_out8 (0x3d5, par->CR36);
+	vga_out8 (0x3d4, 0x60);
+	vga_out8 (0x3d5, par->CR60);
+	vga_out8 (0x3d4, 0x68);
+	vga_out8 (0x3d5, par->CR68);
+	vga_out8 (0x3d4, 0x69);
+	vga_out8 (0x3d5, par->CR69);
+	vga_out8 (0x3d4, 0x6f);
+	vga_out8 (0x3d5, par->CR6F);
+
+	vga_out8 (0x3d4, 0x33);
+	vga_out8 (0x3d5, par->CR33);
+	vga_out8 (0x3d4, 0x86);
+	vga_out8 (0x3d5, par->CR86);
+	vga_out8 (0x3d4, 0x88);
+	vga_out8 (0x3d5, par->CR88);
+	vga_out8 (0x3d4, 0x90);
+	vga_out8 (0x3d5, par->CR90);
+	vga_out8 (0x3d4, 0x91);
+	vga_out8 (0x3d5, par->CR91);
+
+	if (par->chip == S3_SAVAGE4) {
+		vga_out8 (0x3d4, 0xb0);
+		vga_out8 (0x3d5, par->CRB0);
+	}
+
+	vga_out8 (0x3d4, 0x32);
+	vga_out8 (0x3d5, par->CR32);
+
+	/* unlock extended seq regs */
+	vga_out8 (0x3c4, 0x08);
+	vga_out8 (0x3c5, 0x06);
+
+	/* Restore extended sequencer regs for MCLK. SR10 == 255 indicates
+	 * that we should leave the default SR10 and SR11 values there.
+	 */
+	if (par->SR10 != 255) {
+		vga_out8 (0x3c4, 0x10);
+		vga_out8 (0x3c5, par->SR10);
+		vga_out8 (0x3c4, 0x11);
+		vga_out8 (0x3c5, par->SR11);
+	}
+
+	/* restore extended seq regs for dclk */
+	vga_out8 (0x3c4, 0x0e);
+	vga_out8 (0x3c5, par->SR0E);
+	vga_out8 (0x3c4, 0x0f);
+	vga_out8 (0x3c5, par->SR0F);
+	vga_out8 (0x3c4, 0x12);
+	vga_out8 (0x3c5, par->SR12);
+	vga_out8 (0x3c4, 0x13);
+	vga_out8 (0x3c5, par->SR13);
+	vga_out8 (0x3c4, 0x29);
+	vga_out8 (0x3c5, par->SR29);
+
+	vga_out8 (0x3c4, 0x18);
+	vga_out8 (0x3c5, par->SR18);
+
+	/* load new m, n pll values for dclk & mclk */
+	vga_out8 (0x3c4, 0x15);
+	tmp = vga_in8 (0x3c5) & ~0x21;
+
+	vga_out8 (0x3c5, tmp | 0x03);
+	vga_out8 (0x3c5, tmp | 0x23);
+	vga_out8 (0x3c5, tmp | 0x03);
+	vga_out8 (0x3c5, par->SR15);
+	udelay (100);
+
+	vga_out8 (0x3c4, 0x30);
+	vga_out8 (0x3c5, par->SR30);
+	vga_out8 (0x3c4, 0x08);
+	vga_out8 (0x3c5, par->SR08);
+
+	/* now write out cr67 in full, possibly starting STREAMS */
+	VerticalRetraceWait();
+	vga_out8 (0x3d4, 0x67);
+	vga_out8 (0x3d5, par->CR67);
+
+	vga_out8 (0x3d4, 0x66);
+	cr66 = vga_in8 (0x3d5);
+	vga_out8 (0x3d5, cr66 | 0x80);
+	vga_out8 (0x3d4, 0x3a);
+	cr3a = vga_in8 (0x3d5);
+	vga_out8 (0x3d5, cr3a | 0x80);
+
+	if (par->chip != S3_SAVAGE_MX) {
+		VerticalRetraceWait();
+		savage_out32 (FIFO_CONTROL_REG, par->MMPR0);
+		par->SavageWaitIdle (par);
+		savage_out32 (MIU_CONTROL_REG, par->MMPR1);
+		par->SavageWaitIdle (par);
+		savage_out32 (STREAMS_TIMEOUT_REG, par->MMPR2);
+		par->SavageWaitIdle (par);
+		savage_out32 (MISC_TIMEOUT_REG, par->MMPR3);
+	}
+
+	vga_out8 (0x3d4, 0x66);
+	vga_out8 (0x3d5, cr66);
+	vga_out8 (0x3d4, 0x3a);
+	vga_out8 (0x3d5, cr3a);
+
+	SavageSetup2DEngine (par);
+	vgaHWProtect (par, 0);
+}
+
+static void savagefb_update_start (struct savagefb_par      *par,
+				   struct fb_var_screeninfo *var)
+{
+	int base;
+
+	base = ((var->yoffset * var->xres_virtual + (var->xoffset & ~1))
+		* ((var->bits_per_pixel+7) / 8)) >> 2;
+
+	/* now program the start address registers */
+	vga_out16(0x3d4, (base & 0x00ff00) | 0x0c);
+	vga_out16(0x3d4, ((base & 0x00ff) << 8) | 0x0d);
+	vga_out8 (0x3d4, 0x69);
+	vga_out8 (0x3d5, (base & 0x7f0000) >> 16);
+}
+
+
+static void savagefb_set_fix(struct fb_info *info)
+{
+	info->fix.line_length = info->var.xres_virtual *
+		info->var.bits_per_pixel / 8;
+
+	if (info->var.bits_per_pixel == 8)
+		info->fix.visual      = FB_VISUAL_PSEUDOCOLOR;
+	else
+		info->fix.visual      = FB_VISUAL_TRUECOLOR;
+}
+
+#if defined(CONFIG_FB_SAVAGE_ACCEL)
+static void savagefb_set_clip(struct fb_info *info)
+{
+    struct savagefb_par *par = (struct savagefb_par *)info->par;
+    int cmd;
+
+    cmd = BCI_CMD_NOP | BCI_CMD_CLIP_NEW;
+    par->bci_ptr = 0;
+    par->SavageWaitFifo(par,3);
+    BCI_SEND(cmd);
+    BCI_SEND(BCI_CLIP_TL(0, 0));
+    BCI_SEND(BCI_CLIP_BR(0xfff, 0xfff));
+}
+#endif
+
+static int savagefb_set_par (struct fb_info *info)
+{
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+	struct fb_var_screeninfo *var = &info->var;
+	int err;
+
+	DBG("savagefb_set_par");
+	err = savagefb_decode_var (var, par);
+	if (err)
+		return err;
+
+	if (par->dacSpeedBpp <= 0) {
+		if (var->bits_per_pixel > 24)
+			par->dacSpeedBpp = par->clock[3];
+		else if (var->bits_per_pixel >= 24)
+			par->dacSpeedBpp = par->clock[2];
+		else if ((var->bits_per_pixel > 8) && (var->bits_per_pixel < 24))
+			par->dacSpeedBpp = par->clock[1];
+		else if (var->bits_per_pixel <= 8)
+			par->dacSpeedBpp = par->clock[0];
+	}
+
+	/* Set ramdac limits */
+	par->maxClock = par->dacSpeedBpp;
+	par->minClock = 10000;
+
+	savagefb_set_par_int (par);
+	savagefb_update_start (par, var);
+	fb_set_cmap (&info->cmap, info);
+	savagefb_set_fix(info);
+	savagefb_set_clip(info);
+
+	SavagePrintRegs();
+	return 0;
+}
+
+/*
+ *    Pan or Wrap the Display
+ */
+static int savagefb_pan_display (struct fb_var_screeninfo *var,
+				 struct fb_info           *info)
+{
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+	u_int y_bottom;
+
+	y_bottom = var->yoffset;
+
+	if (!(var->vmode & FB_VMODE_YWRAP))
+		y_bottom += var->yres;
+
+	if (var->xoffset > (var->xres_virtual - var->xres))
+		return -EINVAL;
+	if (y_bottom > info->var.yres_virtual)
+		return -EINVAL;
+
+	savagefb_update_start (par, var);
+
+	info->var.xoffset = var->xoffset;
+	info->var.yoffset = var->yoffset;
+
+	if (var->vmode & FB_VMODE_YWRAP)
+		info->var.vmode |= FB_VMODE_YWRAP;
+	else
+		info->var.vmode &= ~FB_VMODE_YWRAP;
+
+	return 0;
+}
+
+
+static struct fb_ops savagefb_ops = {
+	.owner          = THIS_MODULE,
+	.fb_check_var   = savagefb_check_var,
+	.fb_set_par     = savagefb_set_par,
+	.fb_setcolreg   = savagefb_setcolreg,
+	.fb_pan_display = savagefb_pan_display,
+#if defined(CONFIG_FB_SAVAGE_ACCEL)
+	.fb_fillrect    = savagefb_fillrect,
+	.fb_copyarea    = savagefb_copyarea,
+	.fb_imageblit   = savagefb_imageblit,
+	.fb_sync        = savagefb_sync,
+#else
+	.fb_fillrect    = cfb_fillrect,
+	.fb_copyarea    = cfb_copyarea,
+	.fb_imageblit   = cfb_imageblit,
+#endif
+	.fb_cursor      = soft_cursor,
+};
+
+/* --------------------------------------------------------------------- */
+
+static struct fb_var_screeninfo __devinitdata savagefb_var800x600x8 = {
+	.accel_flags =	FB_ACCELF_TEXT,
+	.xres =		800,
+	.yres =		600,
+	.xres_virtual =  800,
+	.yres_virtual =  600,
+	.bits_per_pixel = 8,
+	.pixclock =	25000,
+	.left_margin =	88,
+	.right_margin =	40,
+	.upper_margin =	23,
+	.lower_margin =	1,
+	.hsync_len =	128,
+	.vsync_len =	4,
+	.sync =		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.vmode =	FB_VMODE_NONINTERLACED
+};
+
+static void savage_enable_mmio (struct savagefb_par *par)
+{
+	unsigned char val;
+
+	DBG ("savage_enable_mmio\n");
+
+	val = vga_in8 (0x3c3);
+	vga_out8 (0x3c3, val | 0x01);
+	val = vga_in8 (0x3cc);
+	vga_out8 (0x3c2, val | 0x01);
+
+	if (par->chip >= S3_SAVAGE4) {
+		vga_out8 (0x3d4, 0x40);
+		val = vga_in8 (0x3d5);
+		vga_out8 (0x3d5, val | 1);
+	}
+}
+
+
+static void savage_disable_mmio (struct savagefb_par *par)
+{
+	unsigned char val;
+
+	DBG ("savage_disable_mmio\n");
+
+	if(par->chip >= S3_SAVAGE4 ) {
+		vga_out8 (0x3d4, 0x40);
+		val = vga_in8 (0x3d5);
+		vga_out8 (0x3d5, val | 1);
+	}
+}
+
+
+static int __devinit savage_map_mmio (struct fb_info *info)
+{
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+	DBG ("savage_map_mmio");
+
+	if (S3_SAVAGE3D_SERIES (par->chip))
+		par->mmio.pbase = pci_resource_start (par->pcidev, 0) +
+			SAVAGE_NEWMMIO_REGBASE_S3;
+	else
+		par->mmio.pbase = pci_resource_start (par->pcidev, 0) +
+			SAVAGE_NEWMMIO_REGBASE_S4;
+
+	par->mmio.len = SAVAGE_NEWMMIO_REGSIZE;
+
+	par->mmio.vbase = ioremap (par->mmio.pbase, par->mmio.len);
+	if (!par->mmio.vbase) {
+		printk ("savagefb: unable to map memory mapped IO\n");
+		return -ENOMEM;
+	} else
+		printk (KERN_INFO "savagefb: mapped io at %p\n",
+			par->mmio.vbase);
+
+	info->fix.mmio_start = par->mmio.pbase;
+	info->fix.mmio_len   = par->mmio.len;
+
+	par->bci_base = (u32*)(par->mmio.vbase + BCI_BUFFER_OFFSET);
+	par->bci_ptr  = 0;
+
+	savage_enable_mmio (par);
+
+	return 0;
+}
+
+static void __devinit savage_unmap_mmio (struct fb_info *info)
+{
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+	DBG ("savage_unmap_mmio");
+
+	savage_disable_mmio(par);
+
+	if (par->mmio.vbase) {
+		iounmap ((void *)par->mmio.vbase);
+		par->mmio.vbase = NULL;
+	}
+}
+
+static int __devinit savage_map_video (struct fb_info *info,
+				       int video_len)
+{
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+	int resource;
+
+	DBG("savage_map_video");
+
+	if (S3_SAVAGE3D_SERIES (par->chip))
+		resource = 0;
+	else
+		resource = 1;
+
+	par->video.pbase = pci_resource_start (par->pcidev, resource);
+	par->video.len   = video_len;
+	par->video.vbase = ioremap (par->video.pbase, par->video.len);
+
+	if (!par->video.vbase) {
+		printk ("savagefb: unable to map screen memory\n");
+		return -ENOMEM;
+	} else
+		printk (KERN_INFO "savagefb: mapped framebuffer at %p, "
+			"pbase == %x\n", par->video.vbase, par->video.pbase);
+
+	info->fix.smem_start = par->video.pbase;
+	info->fix.smem_len   = par->video.len - par->cob_size;
+	info->screen_base    = par->video.vbase;
+
+#ifdef CONFIG_MTRR
+	par->video.mtrr = mtrr_add (par->video.pbase, video_len,
+				     MTRR_TYPE_WRCOMB, 1);
+#endif
+
+	/* Clear framebuffer, it's all white in memory after boot */
+	memset (par->video.vbase, 0, par->video.len);
+
+	return 0;
+}
+
+static void __devinit savage_unmap_video (struct fb_info *info)
+{
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+
+	DBG("savage_unmap_video");
+
+	if (par->video.vbase) {
+#ifdef CONFIG_MTRR
+		mtrr_del (par->video.mtrr, par->video.pbase, par->video.len);
+#endif
+
+		iounmap (par->video.vbase);
+		par->video.vbase = NULL;
+		info->screen_base = NULL;
+	}
+}
+
+static int __devinit savage_init_hw (struct savagefb_par *par)
+{
+	unsigned char config1, m, n, n1, n2, sr8, cr3f, cr66 = 0, tmp;
+
+	static unsigned char RamSavage3D[] = { 8, 4, 4, 2 };
+	static unsigned char RamSavage4[] =  { 2, 4, 8, 12, 16, 32, 64, 32 };
+	static unsigned char RamSavageMX[] = { 2, 8, 4, 16, 8, 16, 4, 16 };
+	static unsigned char RamSavageNB[] = { 0, 2, 4, 8, 16, 32, 2, 2 };
+
+	int videoRam, videoRambytes;
+
+	DBG("savage_init_hw");
+
+	/* unprotect CRTC[0-7] */
+	vga_out8(0x3d4, 0x11);
+	tmp = vga_in8(0x3d5);
+	vga_out8(0x3d5, tmp & 0x7f);
+
+	/* unlock extended regs */
+	vga_out16(0x3d4, 0x4838);
+	vga_out16(0x3d4, 0xa039);
+	vga_out16(0x3c4, 0x0608);
+
+	vga_out8(0x3d4, 0x40);
+	tmp = vga_in8(0x3d5);
+	vga_out8(0x3d5, tmp & ~0x01);
+
+	/* unlock sys regs */
+	vga_out8(0x3d4, 0x38);
+	vga_out8(0x3d5, 0x48);
+
+	/* Unlock system registers. */
+	vga_out16(0x3d4, 0x4838);
+
+	/* Next go on to detect amount of installed ram */
+
+	vga_out8(0x3d4, 0x36);            /* for register CR36 (CONFG_REG1), */
+	config1 = vga_in8(0x3d5);           /* get amount of vram installed */
+
+	/* Compute the amount of video memory and offscreen memory. */
+
+	switch  (par->chip) {
+	case S3_SAVAGE3D:
+		videoRam = RamSavage3D[ (config1 & 0xC0) >> 6 ] * 1024;
+		break;
+
+	case S3_SAVAGE4:
+		/*
+		 * The Savage4 has one ugly special case to consider.  On
+		 * systems with 4 banks of 2Mx32 SDRAM, the BIOS says 4MB
+		 * when it really means 8MB.  Why do it the same when you
+		 * can do it different...
+		 */
+		vga_out8(0x3d4, 0x68);	/* memory control 1 */
+		if( (vga_in8(0x3d5) & 0xC0) == (0x01 << 6) )
+			RamSavage4[1] = 8;
+
+		/*FALLTHROUGH*/
+
+	case S3_SAVAGE2000:
+		videoRam = RamSavage4[ (config1 & 0xE0) >> 5 ] * 1024;
+		break;
+
+	case S3_SAVAGE_MX:
+	case S3_SUPERSAVAGE:
+		videoRam = RamSavageMX[ (config1 & 0x0E) >> 1 ] * 1024;
+		break;
+
+	case S3_PROSAVAGE:
+		videoRam = RamSavageNB[ (config1 & 0xE0) >> 5 ] * 1024;
+		break;
+
+	default:
+		/* How did we get here? */
+		videoRam = 0;
+		break;
+	}
+
+	videoRambytes = videoRam * 1024;
+
+	printk (KERN_INFO "savagefb: probed videoram:  %dk\n", videoRam);
+
+	/* reset graphics engine to avoid memory corruption */
+	vga_out8 (0x3d4, 0x66);
+	cr66 = vga_in8 (0x3d5);
+	vga_out8 (0x3d5, cr66 | 0x02);
+	udelay (10000);
+
+	vga_out8 (0x3d4, 0x66);
+	vga_out8 (0x3d5, cr66 & ~0x02);	/* clear reset flag */
+	udelay (10000);
+
+
+	/*
+	 * reset memory interface, 3D engine, AGP master, PCI master,
+	 * master engine unit, motion compensation/LPB
+	 */
+	vga_out8 (0x3d4, 0x3f);
+	cr3f = vga_in8 (0x3d5);
+	vga_out8 (0x3d5, cr3f | 0x08);
+	udelay (10000);
+
+	vga_out8 (0x3d4, 0x3f);
+	vga_out8 (0x3d5, cr3f & ~0x08);	/* clear reset flags */
+	udelay (10000);
+
+	/* Savage ramdac speeds */
+	par->numClocks = 4;
+	par->clock[0] = 250000;
+	par->clock[1] = 250000;
+	par->clock[2] = 220000;
+	par->clock[3] = 220000;
+
+	/* detect current mclk */
+	vga_out8(0x3c4, 0x08);
+	sr8 = vga_in8(0x3c5);
+	vga_out8(0x3c5, 0x06);
+	vga_out8(0x3c4, 0x10);
+	n = vga_in8(0x3c5);
+	vga_out8(0x3c4, 0x11);
+	m = vga_in8(0x3c5);
+	vga_out8(0x3c4, 0x08);
+	vga_out8(0x3c5, sr8);
+	m &= 0x7f;
+	n1 = n & 0x1f;
+	n2 = (n >> 5) & 0x03;
+	par->MCLK = ((1431818 * (m+2)) / (n1+2) / (1 << n2) + 50) / 100;
+	printk (KERN_INFO "savagefb: Detected current MCLK value of %d kHz\n",
+		par->MCLK);
+
+	/* Check LCD panel parrmation */
+
+	if (par->chip == S3_SAVAGE_MX) {
+		unsigned char cr6b = VGArCR( 0x6b );
+
+		int panelX = (VGArSEQ (0x61) +
+			      ((VGArSEQ (0x66) & 0x02) << 7) + 1) * 8;
+		int panelY = (VGArSEQ (0x69) +
+			      ((VGArSEQ (0x6e) & 0x70) << 4) + 1);
+
+		char * sTechnology = "Unknown";
+
+		/* OK, I admit it.  I don't know how to limit the max dot clock
+		 * for LCD panels of various sizes.  I thought I copied the
+		 * formula from the BIOS, but many users have parrmed me of
+		 * my folly.
+		 *
+		 * Instead, I'll abandon any attempt to automatically limit the
+		 * clock, and add an LCDClock option to XF86Config.  Some day,
+		 * I should come back to this.
+		 */
+
+		enum ACTIVE_DISPLAYS { /* These are the bits in CR6B */
+			ActiveCRT = 0x01,
+			ActiveLCD = 0x02,
+			ActiveTV = 0x04,
+			ActiveCRT2 = 0x20,
+			ActiveDUO = 0x80
+		};
+
+		if ((VGArSEQ (0x39) & 0x03) == 0) {
+			sTechnology = "TFT";
+		} else if ((VGArSEQ (0x30) & 0x01) == 0) {
+			sTechnology = "DSTN";
+		} else 	{
+			sTechnology = "STN";
+		}
+
+		printk (KERN_INFO "savagefb: %dx%d %s LCD panel detected %s\n",
+			panelX, panelY, sTechnology,
+			cr6b & ActiveLCD ? "and active" : "but not active");
+
+		if( cr6b & ActiveLCD ) 	{
+			/*
+			 * If the LCD is active and panel expansion is enabled,
+			 * we probably want to kill the HW cursor.
+			 */
+
+			printk (KERN_INFO "savagefb: Limiting video mode to "
+				"%dx%d\n", panelX, panelY );
+
+			par->SavagePanelWidth = panelX;
+			par->SavagePanelHeight = panelY;
+
+		}
+	}
+
+	savage_get_default_par (par);
+
+	if( S3_SAVAGE4_SERIES(par->chip) ) {
+		/*
+		 * The Savage4 and ProSavage have COB coherency bugs which
+		 * render the buffer useless.  We disable it.
+		 */
+		par->cob_index = 2;
+		par->cob_size = 0x8000 << par->cob_index;
+		par->cob_offset = videoRambytes;
+	} else {
+		/* We use 128kB for the COB on all chips. */
+
+		par->cob_index  = 7;
+		par->cob_size   = 0x400 << par->cob_index;
+		par->cob_offset = videoRambytes - par->cob_size;
+	}
+
+	return videoRambytes;
+}
+
+static int __devinit savage_init_fb_info (struct fb_info *info,
+					  struct pci_dev *dev,
+					  const struct pci_device_id *id)
+{
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+	int err = 0;
+
+	par->pcidev  = dev;
+
+	info->fix.type	   = FB_TYPE_PACKED_PIXELS;
+	info->fix.type_aux	   = 0;
+	info->fix.xpanstep	   = 2;
+	info->fix.ypanstep	   = 1;
+	info->fix.ywrapstep   = 0;
+	info->fix.accel       = id->driver_data;
+
+	switch (info->fix.accel) {
+	case FB_ACCEL_SUPERSAVAGE:
+		par->chip = S3_SUPERSAVAGE;
+		snprintf (info->fix.id, 16, "SuperSavage");
+		break;
+	case FB_ACCEL_SAVAGE4:
+		par->chip = S3_SAVAGE4;
+		snprintf (info->fix.id, 16, "Savage4");
+		break;
+	case FB_ACCEL_SAVAGE3D:
+		par->chip = S3_SAVAGE3D;
+		snprintf (info->fix.id, 16, "Savage3D");
+		break;
+	case FB_ACCEL_SAVAGE3D_MV:
+		par->chip = S3_SAVAGE3D;
+		snprintf (info->fix.id, 16, "Savage3D-MV");
+		break;
+	case FB_ACCEL_SAVAGE2000:
+		par->chip = S3_SAVAGE2000;
+		snprintf (info->fix.id, 16, "Savage2000");
+		break;
+	case FB_ACCEL_SAVAGE_MX_MV:
+		par->chip = S3_SAVAGE_MX;
+		snprintf (info->fix.id, 16, "Savage/MX-MV");
+		break;
+	case FB_ACCEL_SAVAGE_MX:
+		par->chip = S3_SAVAGE_MX;
+		snprintf (info->fix.id, 16, "Savage/MX");
+		break;
+	case FB_ACCEL_SAVAGE_IX_MV:
+		par->chip = S3_SAVAGE_MX;
+		snprintf (info->fix.id, 16, "Savage/IX-MV");
+		break;
+	case FB_ACCEL_SAVAGE_IX:
+		par->chip = S3_SAVAGE_MX;
+		snprintf (info->fix.id, 16, "Savage/IX");
+		break;
+	case FB_ACCEL_PROSAVAGE_PM:
+		par->chip = S3_PROSAVAGE;
+		snprintf (info->fix.id, 16, "ProSavagePM");
+		break;
+	case FB_ACCEL_PROSAVAGE_KM:
+		par->chip = S3_PROSAVAGE;
+		snprintf (info->fix.id, 16, "ProSavageKM");
+		break;
+	case FB_ACCEL_S3TWISTER_P:
+		par->chip = S3_PROSAVAGE;
+		snprintf (info->fix.id, 16, "TwisterP");
+		break;
+	case FB_ACCEL_S3TWISTER_K:
+		par->chip = S3_PROSAVAGE;
+		snprintf (info->fix.id, 16, "TwisterK");
+		break;
+	case FB_ACCEL_PROSAVAGE_DDR:
+		par->chip = S3_PROSAVAGE;
+		snprintf (info->fix.id, 16, "ProSavageDDR");
+		break;
+	case FB_ACCEL_PROSAVAGE_DDRK:
+		par->chip = S3_PROSAVAGE;
+		snprintf (info->fix.id, 16, "ProSavage8");
+		break;
+	}
+
+	if (S3_SAVAGE3D_SERIES(par->chip)) {
+		par->SavageWaitIdle = savage3D_waitidle;
+		par->SavageWaitFifo = savage3D_waitfifo;
+	} else if (S3_SAVAGE4_SERIES(par->chip) ||
+		   S3_SUPERSAVAGE == par->chip) {
+		par->SavageWaitIdle = savage4_waitidle;
+		par->SavageWaitFifo = savage4_waitfifo;
+	} else {
+		par->SavageWaitIdle = savage2000_waitidle;
+		par->SavageWaitFifo = savage2000_waitfifo;
+	}
+
+	info->var.nonstd      = 0;
+	info->var.activate    = FB_ACTIVATE_NOW;
+	info->var.width       = -1;
+	info->var.height      = -1;
+	info->var.accel_flags = 0;
+
+	info->fbops          = &savagefb_ops;
+	info->flags          = FBINFO_DEFAULT |
+		               FBINFO_HWACCEL_YPAN |
+		               FBINFO_HWACCEL_XPAN;
+
+	info->pseudo_palette = par->pseudo_palette;
+
+#if defined(CONFIG_FB_SAVAGE_ACCEL)
+	/* FIFO size + padding for commands */
+	info->pixmap.addr = kmalloc(8*1024, GFP_KERNEL);
+
+	err = -ENOMEM;
+	if (info->pixmap.addr) {
+		memset(info->pixmap.addr, 0, 8*1024);
+		info->pixmap.size = 8*1024;
+		info->pixmap.scan_align = 4;
+		info->pixmap.buf_align = 4;
+		info->pixmap.access_align = 4;
+
+		fb_alloc_cmap (&info->cmap, NR_PALETTE, 0);
+		info->flags |= FBINFO_HWACCEL_COPYAREA |
+	                       FBINFO_HWACCEL_FILLRECT |
+		               FBINFO_HWACCEL_IMAGEBLIT;
+
+		err = 0;
+	}
+#endif
+	return err;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int __devinit savagefb_probe (struct pci_dev* dev,
+				     const struct pci_device_id* id)
+{
+	struct fb_info *info;
+	struct savagefb_par *par;
+	u_int h_sync, v_sync;
+	int err, lpitch;
+	int video_len;
+
+	DBG("savagefb_probe");
+	SavagePrintRegs();
+
+	info = framebuffer_alloc(sizeof(struct savagefb_par), &dev->dev);
+	if (!info)
+		return -ENOMEM;
+	par = info->par;
+	err = pci_enable_device(dev);
+	if (err)
+		goto failed_enable;
+
+	if (pci_request_regions(dev, "savagefb")) {
+		printk(KERN_ERR "cannot request PCI regions\n");
+		goto failed_enable;
+	}
+
+	err = -ENOMEM;
+
+	if (savage_init_fb_info(info, dev, id))
+		goto failed_init;
+
+	err = savage_map_mmio(info);
+	if (err)
+		goto failed_mmio;
+
+	video_len = savage_init_hw(par);
+	if (video_len < 0) {
+		err = video_len;
+		goto failed_mmio;
+	}
+
+	err = savage_map_video(info, video_len);
+	if (err)
+		goto failed_video;
+
+	INIT_LIST_HEAD(&info->modelist);
+#if defined(CONFIG_FB_SAVAGE_I2C)
+	savagefb_create_i2c_busses(info);
+	savagefb_probe_i2c_connector(par, &par->edid);
+	fb_edid_to_monspecs(par->edid, &info->monspecs);
+	fb_videomode_to_modelist(info->monspecs.modedb,
+				 info->monspecs.modedb_len,
+				 &info->modelist);
+#endif
+	info->var = savagefb_var800x600x8;
+
+	if (mode_option) {
+		fb_find_mode(&info->var, info, mode_option,
+			     info->monspecs.modedb, info->monspecs.modedb_len,
+			     NULL, 8);
+	} else if (info->monspecs.modedb != NULL) {
+		struct fb_monspecs *specs = &info->monspecs;
+		struct fb_videomode modedb;
+
+		if (info->monspecs.misc & FB_MISC_1ST_DETAIL) {
+			int i;
+
+			for (i = 0; i < specs->modedb_len; i++) {
+				if (specs->modedb[i].flag & FB_MODE_IS_FIRST) {
+					modedb = specs->modedb[i];
+					break;
+				}
+			}
+		} else {
+			/* otherwise, get first mode in database */
+			modedb = specs->modedb[0];
+		}
+
+		savage_update_var(&info->var, &modedb);
+	}
+
+	/* maximize virtual vertical length */
+	lpitch = info->var.xres_virtual*((info->var.bits_per_pixel + 7) >> 3);
+	info->var.yres_virtual = info->fix.smem_len/lpitch;
+
+	if (info->var.yres_virtual < info->var.yres)
+		goto failed;
+
+#if defined(CONFIG_FB_SAVAGE_ACCEL)
+	/*
+	 * The clipping coordinates are masked with 0xFFF, so limit our
+	 * virtual resolutions to these sizes.
+	 */
+	if (info->var.yres_virtual > 0x1000)
+		info->var.yres_virtual = 0x1000;
+
+	if (info->var.xres_virtual > 0x1000)
+		info->var.xres_virtual = 0x1000;
+#endif
+	savagefb_check_var(&info->var, info);
+	savagefb_set_fix(info);
+
+	/*
+	 * Calculate the hsync and vsync frequencies.  Note that
+	 * we split the 1e12 constant up so that we can preserve
+	 * the precision and fit the results into 32-bit registers.
+	 *  (1953125000 * 512 = 1e12)
+	 */
+	h_sync = 1953125000 / info->var.pixclock;
+	h_sync = h_sync * 512 / (info->var.xres + info->var.left_margin +
+				 info->var.right_margin +
+				 info->var.hsync_len);
+	v_sync = h_sync / (info->var.yres + info->var.upper_margin +
+			   info->var.lower_margin + info->var.vsync_len);
+
+	printk(KERN_INFO "savagefb v" SAVAGEFB_VERSION ": "
+	       "%dkB VRAM, using %dx%d, %d.%03dkHz, %dHz\n",
+	       info->fix.smem_len >> 10,
+	       info->var.xres, info->var.yres,
+	       h_sync / 1000, h_sync % 1000, v_sync);
+
+
+	fb_destroy_modedb(info->monspecs.modedb);
+	info->monspecs.modedb = NULL;
+
+	err = register_framebuffer (info);
+	if (err < 0)
+		goto failed;
+
+	printk (KERN_INFO "fb: S3 %s frame buffer device\n",
+		info->fix.id);
+
+	/*
+	 * Our driver data
+	 */
+	pci_set_drvdata(dev, info);
+
+	return 0;
+
+ failed:
+#ifdef CONFIG_FB_SAVAGE_I2C
+	savagefb_delete_i2c_busses(info);
+#endif
+	fb_alloc_cmap (&info->cmap, 0, 0);
+	savage_unmap_video(info);
+ failed_video:
+	savage_unmap_mmio (info);
+ failed_mmio:
+	kfree(info->pixmap.addr);
+ failed_init:
+	pci_release_regions(dev);
+ failed_enable:
+	framebuffer_release(info);
+
+	return err;
+}
+
+static void __devexit savagefb_remove (struct pci_dev *dev)
+{
+	struct fb_info *info =
+		(struct fb_info *)pci_get_drvdata(dev);
+
+	DBG("savagefb_remove");
+
+	if (info) {
+		/*
+		 * If unregister_framebuffer fails, then
+		 * we will be leaving hooks that could cause
+		 * oopsen laying around.
+		 */
+		if (unregister_framebuffer (info))
+			printk (KERN_WARNING "savagefb: danger danger! "
+				"Oopsen imminent!\n");
+
+#ifdef CONFIG_FB_SAVAGE_I2C
+		savagefb_delete_i2c_busses(info);
+#endif
+		fb_alloc_cmap (&info->cmap, 0, 0);
+		savage_unmap_video (info);
+		savage_unmap_mmio (info);
+		kfree(info->pixmap.addr);
+		pci_release_regions(dev);
+		framebuffer_release(info);
+
+		/*
+		 * Ensure that the driver data is no longer
+		 * valid.
+		 */
+		pci_set_drvdata(dev, NULL);
+	}
+}
+
+static int savagefb_suspend (struct pci_dev* dev, u32 state)
+{
+	struct fb_info *info =
+		(struct fb_info *)pci_get_drvdata(dev);
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+
+	DBG("savagefb_suspend");
+	printk(KERN_DEBUG "state: %u\n", state);
+
+	acquire_console_sem();
+	fb_set_suspend(info, state);
+	savage_disable_mmio(par);
+	release_console_sem();
+
+	pci_disable_device(dev);
+	pci_set_power_state(dev, state);
+
+	return 0;
+}
+
+static int savagefb_resume (struct pci_dev* dev)
+{
+	struct fb_info *info =
+		(struct fb_info *)pci_get_drvdata(dev);
+	struct savagefb_par *par = (struct savagefb_par *)info->par;
+
+	DBG("savage_resume");
+
+	pci_set_power_state(dev, 0);
+	pci_restore_state(dev);
+	if(pci_enable_device(dev))
+		DBG("err");
+
+	SavagePrintRegs();
+
+	acquire_console_sem();
+
+	savage_enable_mmio(par);
+	savage_init_hw(par);
+	savagefb_set_par (info);
+
+	fb_set_suspend (info, 0);
+	release_console_sem();
+
+	return 0;
+}
+
+
+static struct pci_device_id savagefb_devices[] __devinitdata = {
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_MX128,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_MX64,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_MX64C,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IX128SDR,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IX128DDR,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IX64SDR,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IX64DDR,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IXCSDR,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IXCDDR,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE4,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE4},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE3D,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE3D},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE3D_MV,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE3D_MV},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE2000,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE2000},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE_MX_MV,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE_MX_MV},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE_MX,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE_MX},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE_IX_MV,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE_IX_MV},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE_IX,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE_IX},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_PROSAVAGE_PM,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_PROSAVAGE_PM},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_PROSAVAGE_KM,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_PROSAVAGE_KM},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_S3TWISTER_P,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_S3TWISTER_P},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_S3TWISTER_K,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_S3TWISTER_K},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_PROSAVAGE_DDR,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_PROSAVAGE_DDR},
+
+	{PCI_VENDOR_ID_S3, PCI_CHIP_PROSAVAGE_DDRK,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_PROSAVAGE_DDRK},
+
+	{0, 0, 0, 0, 0, 0, 0}
+};
+
+MODULE_DEVICE_TABLE(pci, savagefb_devices);
+
+static struct pci_driver savagefb_driver = {
+	.name =     "savagefb",
+	.id_table = savagefb_devices,
+	.probe =    savagefb_probe,
+	.suspend =  savagefb_suspend,
+	.resume =   savagefb_resume,
+	.remove =   __devexit_p(savagefb_remove)
+};
+
+/* **************************** exit-time only **************************** */
+
+static void __exit savage_done (void)
+{
+	DBG("savage_done");
+	pci_unregister_driver (&savagefb_driver);
+}
+
+
+/* ************************* init in-kernel code ************************** */
+
+static int __init savagefb_setup(char *options)
+{
+#ifndef MODULE
+	char *this_opt;
+
+	if (!options || !*options)
+		return 0;
+
+	while ((this_opt = strsep(&options, ",")) != NULL) {
+		mode_option = this_opt;
+	}
+#endif /* !MODULE */
+	return 0;
+}
+
+static int __init savagefb_init(void)
+{
+	char *option;
+
+	DBG("savagefb_init");
+
+	if (fb_get_options("savagefb", &option))
+		return -ENODEV;
+
+	savagefb_setup(option);
+	return pci_register_driver (&savagefb_driver);
+
+}
+
+module_init(savagefb_init);
+module_exit(savage_done);