Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

12 files changed, 299 insertions, 49 deletions

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index d83c87b902c1..e32694c13da5 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -128,12 +128,12 @@ config LCD_HX8357
 	  If you have a HX-8357 LCD panel, say Y to enable its LCD control
 	  driver.
 
-  config LCD_OTM3225A
-  	tristate "ORISE Technology OTM3225A support"
-  	depends on SPI
-  	help
-  	  If you have a panel based on the OTM3225A controller
-  	  chip then say y to include a driver for it.
+config LCD_OTM3225A
+	tristate "ORISE Technology OTM3225A support"
+	depends on SPI
+	help
+	  If you have a panel based on the OTM3225A controller
+	  chip then say y to include a driver for it.
 
 endif # LCD_CLASS_DEVICE
 
@@ -269,11 +269,11 @@ config BACKLIGHT_MAX8925
 	  WLED output, say Y here to enable this driver.
 
 config BACKLIGHT_APPLE
-       tristate "Apple Backlight Driver"
-       depends on X86 && ACPI
-       help
-	 If you have an Intel-based Apple say Y to enable a driver for its
-	 backlight.
+	tristate "Apple Backlight Driver"
+	depends on X86 && ACPI
+	help
+	  If you have an Intel-based Apple say Y to enable a driver for its
+	  backlight.
 
 config BACKLIGHT_TOSA
 	tristate "Sharp SL-6000 Backlight Driver"
@@ -289,6 +289,14 @@ config BACKLIGHT_QCOM_WLED
 	  If you have the Qualcomm PMIC, say Y to enable a driver for the
 	  WLED block. Currently it supports PM8941 and PMI8998.
 
+config BACKLIGHT_RT4831
+	tristate "Richtek RT4831 Backlight Driver"
+	depends on MFD_RT4831
+	help
+	  This enables support for Richtek RT4831 Backlight driver.
+	  It's commonly used to drive the display WLED. There're four channels
+	  inisde, and each channel can provide up to 30mA current.
+
 config BACKLIGHT_SAHARA
 	tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
 	depends on X86
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 685f3f1ca4df..cae2c83422ae 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA)		+= pandora_bl.o
 obj-$(CONFIG_BACKLIGHT_PCF50633)	+= pcf50633-backlight.o
 obj-$(CONFIG_BACKLIGHT_PWM)		+= pwm_bl.o
 obj-$(CONFIG_BACKLIGHT_QCOM_WLED)	+= qcom-wled.o
+obj-$(CONFIG_BACKLIGHT_RT4831)		+= rt4831-backlight.o
 obj-$(CONFIG_BACKLIGHT_SAHARA)		+= kb3886_bl.o
 obj-$(CONFIG_BACKLIGHT_SKY81452)	+= sky81452-backlight.o
 obj-$(CONFIG_BACKLIGHT_TOSA)		+= tosa_bl.o
diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index e88a2b0e5904..e8b185bb6f5e 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -52,6 +52,7 @@ struct lm3630a_chip {
 	struct gpio_desc *enable_gpio;
 	struct regmap *regmap;
 	struct pwm_device *pwmd;
+	struct pwm_state pwmd_state;
 };
 
 /* i2c access */
@@ -167,16 +168,19 @@ static int lm3630a_intr_config(struct lm3630a_chip *pchip)
 	return rval;
 }
 
-static void lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max)
+static int lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max)
 {
-	unsigned int period = pchip->pdata->pwm_period;
-	unsigned int duty = br * period / br_max;
+	int err;
 
-	pwm_config(pchip->pwmd, duty, period);
-	if (duty)
-		pwm_enable(pchip->pwmd);
-	else
-		pwm_disable(pchip->pwmd);
+	pchip->pwmd_state.period = pchip->pdata->pwm_period;
+
+	err = pwm_set_relative_duty_cycle(&pchip->pwmd_state, br, br_max);
+	if (err)
+		return err;
+
+	pchip->pwmd_state.enabled = pchip->pwmd_state.duty_cycle ? true : false;
+
+	return pwm_apply_state(pchip->pwmd, &pchip->pwmd_state);
 }
 
 /* update and get brightness */
@@ -187,11 +191,9 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl)
 	enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
 
 	/* pwm control */
-	if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) {
-		lm3630a_pwm_ctrl(pchip, bl->props.brightness,
-				 bl->props.max_brightness);
-		return bl->props.brightness;
-	}
+	if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0)
+		return lm3630a_pwm_ctrl(pchip, bl->props.brightness,
+					bl->props.max_brightness);
 
 	/* disable sleep */
 	ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
@@ -210,8 +212,8 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl)
 	return 0;
 
 out_i2c_err:
-	dev_err(pchip->dev, "i2c failed to access\n");
-	return bl->props.brightness;
+	dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret));
+	return ret;
 }
 
 static int lm3630a_bank_a_get_brightness(struct backlight_device *bl)
@@ -264,11 +266,9 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl)
 	enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
 
 	/* pwm control */
-	if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) {
-		lm3630a_pwm_ctrl(pchip, bl->props.brightness,
-				 bl->props.max_brightness);
-		return bl->props.brightness;
-	}
+	if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0)
+		return lm3630a_pwm_ctrl(pchip, bl->props.brightness,
+					bl->props.max_brightness);
 
 	/* disable sleep */
 	ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
@@ -287,8 +287,8 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl)
 	return 0;
 
 out_i2c_err:
-	dev_err(pchip->dev, "i2c failed to access REG_CTRL\n");
-	return bl->props.brightness;
+	dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret));
+	return ret;
 }
 
 static int lm3630a_bank_b_get_brightness(struct backlight_device *bl)
@@ -482,8 +482,10 @@ static int lm3630a_parse_node(struct lm3630a_chip *pchip,
 
 	device_for_each_child_node(pchip->dev, node) {
 		ret = lm3630a_parse_bank(pdata, node, &seen_led_sources);
-		if (ret)
+		if (ret) {
+			fwnode_handle_put(node);
 			return ret;
+		}
 	}
 
 	return ret;
@@ -563,11 +565,7 @@ static int lm3630a_probe(struct i2c_client *client,
 			return PTR_ERR(pchip->pwmd);
 		}
 
-		/*
-		 * FIXME: pwm_apply_args() should be removed when switching to
-		 * the atomic PWM API.
-		 */
-		pwm_apply_args(pchip->pwmd);
+		pwm_init_state(pchip->pwmd, &pchip->pwmd_state);
 	}
 
 	/* interrupt enable  : irq 0 is not allowed */
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 7c02f87c51c2..d094299c2a48 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -1717,6 +1717,7 @@ static int wled_remove(struct platform_device *pdev)
 
 static const struct of_device_id wled_match_table[] = {
 	{ .compatible = "qcom,pm8941-wled", .data = (void *)3 },
+	{ .compatible = "qcom,pmi8994-wled", .data = (void *)4 },
 	{ .compatible = "qcom,pmi8998-wled", .data = (void *)4 },
 	{ .compatible = "qcom,pm660l-wled", .data = (void *)4 },
 	{ .compatible = "qcom,pm8150l-wled", .data = (void *)5 },
diff --git a/drivers/video/backlight/rt4831-backlight.c b/drivers/video/backlight/rt4831-backlight.c
new file mode 100644
index 000000000000..42155c7d2db1
--- /dev/null
+++ b/drivers/video/backlight/rt4831-backlight.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <dt-bindings/leds/rt4831-backlight.h>
+#include <linux/backlight.h>
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#define RT4831_REG_BLCFG	0x02
+#define RT4831_REG_BLDIML	0x04
+#define RT4831_REG_ENABLE	0x08
+
+#define RT4831_BLMAX_BRIGHTNESS	2048
+
+#define RT4831_BLOVP_MASK	GENMASK(7, 5)
+#define RT4831_BLOVP_SHIFT	5
+#define RT4831_BLPWMEN_MASK	BIT(0)
+#define RT4831_BLEN_MASK	BIT(4)
+#define RT4831_BLCH_MASK	GENMASK(3, 0)
+#define RT4831_BLDIML_MASK	GENMASK(2, 0)
+#define RT4831_BLDIMH_MASK	GENMASK(10, 3)
+#define RT4831_BLDIMH_SHIFT	3
+
+struct rt4831_priv {
+	struct device *dev;
+	struct regmap *regmap;
+	struct backlight_device *bl;
+};
+
+static int rt4831_bl_update_status(struct backlight_device *bl_dev)
+{
+	struct rt4831_priv *priv = bl_get_data(bl_dev);
+	int brightness = backlight_get_brightness(bl_dev);
+	unsigned int enable = brightness ? RT4831_BLEN_MASK : 0;
+	u8 v[2];
+	int ret;
+
+	if (brightness) {
+		v[0] = (brightness - 1) & RT4831_BLDIML_MASK;
+		v[1] = ((brightness - 1) & RT4831_BLDIMH_MASK) >> RT4831_BLDIMH_SHIFT;
+
+		ret = regmap_raw_write(priv->regmap, RT4831_REG_BLDIML, v, sizeof(v));
+		if (ret)
+			return ret;
+	}
+
+	return regmap_update_bits(priv->regmap, RT4831_REG_ENABLE, RT4831_BLEN_MASK, enable);
+
+}
+
+static int rt4831_bl_get_brightness(struct backlight_device *bl_dev)
+{
+	struct rt4831_priv *priv = bl_get_data(bl_dev);
+	unsigned int val;
+	u8 v[2];
+	int ret;
+
+	ret = regmap_read(priv->regmap, RT4831_REG_ENABLE, &val);
+	if (ret)
+		return ret;
+
+	if (!(val & RT4831_BLEN_MASK))
+		return 0;
+
+	ret = regmap_raw_read(priv->regmap, RT4831_REG_BLDIML, v, sizeof(v));
+	if (ret)
+		return ret;
+
+	ret = (v[1] << RT4831_BLDIMH_SHIFT) + (v[0] & RT4831_BLDIML_MASK) + 1;
+
+	return ret;
+}
+
+static const struct backlight_ops rt4831_bl_ops = {
+	.options = BL_CORE_SUSPENDRESUME,
+	.update_status = rt4831_bl_update_status,
+	.get_brightness = rt4831_bl_get_brightness,
+};
+
+static int rt4831_parse_backlight_properties(struct rt4831_priv *priv,
+					     struct backlight_properties *bl_props)
+{
+	struct device *dev = priv->dev;
+	u8 propval;
+	u32 brightness;
+	unsigned int val = 0;
+	int ret;
+
+	/* common properties */
+	ret = device_property_read_u32(dev, "max-brightness", &brightness);
+	if (ret)
+		brightness = RT4831_BLMAX_BRIGHTNESS;
+
+	bl_props->max_brightness = min_t(u32, brightness, RT4831_BLMAX_BRIGHTNESS);
+
+	ret = device_property_read_u32(dev, "default-brightness", &brightness);
+	if (ret)
+		brightness = bl_props->max_brightness;
+
+	bl_props->brightness = min_t(u32, brightness, bl_props->max_brightness);
+
+	/* vendor properties */
+	if (device_property_read_bool(dev, "richtek,pwm-enable"))
+		val = RT4831_BLPWMEN_MASK;
+
+	ret = regmap_update_bits(priv->regmap, RT4831_REG_BLCFG, RT4831_BLPWMEN_MASK, val);
+	if (ret)
+		return ret;
+
+	ret = device_property_read_u8(dev, "richtek,bled-ovp-sel", &propval);
+	if (ret)
+		propval = RT4831_BLOVPLVL_21V;
+
+	propval = min_t(u8, propval, RT4831_BLOVPLVL_29V);
+	ret = regmap_update_bits(priv->regmap, RT4831_REG_BLCFG, RT4831_BLOVP_MASK,
+				 propval << RT4831_BLOVP_SHIFT);
+	if (ret)
+		return ret;
+
+	ret = device_property_read_u8(dev, "richtek,channel-use", &propval);
+	if (ret) {
+		dev_err(dev, "richtek,channel-use DT property missing\n");
+		return ret;
+	}
+
+	if (!(propval & RT4831_BLCH_MASK)) {
+		dev_err(dev, "No channel specified\n");
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(priv->regmap, RT4831_REG_ENABLE, RT4831_BLCH_MASK, propval);
+}
+
+static int rt4831_bl_probe(struct platform_device *pdev)
+{
+	struct rt4831_priv *priv;
+	struct backlight_properties bl_props = { .type = BACKLIGHT_RAW,
+						 .scale = BACKLIGHT_SCALE_LINEAR };
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+
+	priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!priv->regmap) {
+		dev_err(&pdev->dev, "Failed to init regmap\n");
+		return -ENODEV;
+	}
+
+	ret = rt4831_parse_backlight_properties(priv, &bl_props);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to parse backlight properties\n");
+		return ret;
+	}
+
+	priv->bl = devm_backlight_device_register(&pdev->dev, pdev->name, &pdev->dev, priv,
+						  &rt4831_bl_ops, &bl_props);
+	if (IS_ERR(priv->bl)) {
+		dev_err(&pdev->dev, "Failed to register backlight\n");
+		return PTR_ERR(priv->bl);
+	}
+
+	backlight_update_status(priv->bl);
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+}
+
+static int rt4831_bl_remove(struct platform_device *pdev)
+{
+	struct rt4831_priv *priv = platform_get_drvdata(pdev);
+	struct backlight_device *bl_dev = priv->bl;
+
+	bl_dev->props.brightness = 0;
+	backlight_update_status(priv->bl);
+
+	return 0;
+}
+
+static const struct of_device_id __maybe_unused rt4831_bl_of_match[] = {
+	{ .compatible = "richtek,rt4831-backlight", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rt4831_bl_of_match);
+
+static struct platform_driver rt4831_bl_driver = {
+	.driver = {
+		.name = "rt4831-backlight",
+		.of_match_table = rt4831_bl_of_match,
+	},
+	.probe = rt4831_bl_probe,
+	.remove = rt4831_bl_remove,
+};
+module_platform_driver(rt4831_bl_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index ee33b8ec62bb..840d9813b0bc 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -9,7 +9,7 @@ config VGA_CONSOLE
 	bool "VGA text console" if EXPERT || !X86
 	depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC &&  !SUPERH && \
 		(!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \
-		!ARM64 && !ARC && !MICROBLAZE && !OPENRISC && !NDS32 && !S390
+		!ARM64 && !ARC && !MICROBLAZE && !OPENRISC && !NDS32 && !S390 && !UML
 	default y
 	help
 	  Saying Y here will allow you to use Linux in text mode through a
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 5e1ad0c92bfc..d33c5cd684c0 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -2209,7 +2209,6 @@ config FB_SIMPLE
 config FB_SSD1307
 	tristate "Solomon SSD1307 framebuffer support"
 	depends on FB && I2C
-	depends on OF
 	depends on GPIOLIB || COMPILE_TEST
 	select FB_SYS_FOPS
 	select FB_SYS_FILLRECT
diff --git a/drivers/video/fbdev/core/fb_defio.c b/drivers/video/fbdev/core/fb_defio.c
index b292887a2481..a591d291b231 100644
--- a/drivers/video/fbdev/core/fb_defio.c
+++ b/drivers/video/fbdev/core/fb_defio.c
@@ -52,6 +52,13 @@ static vm_fault_t fb_deferred_io_fault(struct vm_fault *vmf)
 		return VM_FAULT_SIGBUS;
 
 	get_page(page);
+
+	if (vmf->vma->vm_file)
+		page->mapping = vmf->vma->vm_file->f_mapping;
+	else
+		printk(KERN_ERR "no mapping available\n");
+
+	BUG_ON(!page->mapping);
 	page->index = vmf->pgoff;
 
 	vmf->page = page;
@@ -144,6 +151,17 @@ static const struct vm_operations_struct fb_deferred_io_vm_ops = {
 	.page_mkwrite	= fb_deferred_io_mkwrite,
 };
 
+static int fb_deferred_io_set_page_dirty(struct page *page)
+{
+	if (!PageDirty(page))
+		SetPageDirty(page);
+	return 0;
+}
+
+static const struct address_space_operations fb_deferred_io_aops = {
+	.set_page_dirty = fb_deferred_io_set_page_dirty,
+};
+
 int fb_deferred_io_mmap(struct fb_info *info, struct vm_area_struct *vma)
 {
 	vma->vm_ops = &fb_deferred_io_vm_ops;
@@ -194,12 +212,29 @@ void fb_deferred_io_init(struct fb_info *info)
 }
 EXPORT_SYMBOL_GPL(fb_deferred_io_init);
 
+void fb_deferred_io_open(struct fb_info *info,
+			 struct inode *inode,
+			 struct file *file)
+{
+	file->f_mapping->a_ops = &fb_deferred_io_aops;
+}
+EXPORT_SYMBOL_GPL(fb_deferred_io_open);
+
 void fb_deferred_io_cleanup(struct fb_info *info)
 {
 	struct fb_deferred_io *fbdefio = info->fbdefio;
+	struct page *page;
+	int i;
 
 	BUG_ON(!fbdefio);
 	cancel_delayed_work_sync(&info->deferred_work);
+
+	/* clear out the mapping that we setup */
+	for (i = 0 ; i < info->fix.smem_len; i += PAGE_SIZE) {
+		page = fb_deferred_io_page(info, i);
+		page->mapping = NULL;
+	}
+
 	mutex_destroy(&fbdefio->lock);
 }
 EXPORT_SYMBOL_GPL(fb_deferred_io_cleanup);
diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index 1598736e3bcf..71fb710f1ce3 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -970,13 +970,11 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
 		fb_var_to_videomode(&mode2, &info->var);
 		/* make sure we don't delete the videomode of current var */
 		ret = fb_mode_is_equal(&mode1, &mode2);
-
-		if (!ret)
-			fbcon_mode_deleted(info, &mode1);
-
-		if (!ret)
-			fb_delete_videomode(&mode1, &info->modelist);
-
+		if (!ret) {
+			ret = fbcon_mode_deleted(info, &mode1);
+			if (!ret)
+				fb_delete_videomode(&mode1, &info->modelist);
+		}
 
 		return ret ? -EINVAL : 0;
 	}
@@ -1415,6 +1413,10 @@ __releases(&info->lock)
 		if (res)
 			module_put(info->fbops->owner);
 	}
+#ifdef CONFIG_FB_DEFERRED_IO
+	if (info->fbdefio)
+		fb_deferred_io_open(info, inode, file);
+#endif
 out:
 	unlock_fb_info(info);
 	if (res)
diff --git a/drivers/video/fbdev/hgafb.c b/drivers/video/fbdev/hgafb.c
index cc8e62ae93f6..bd3d07aa4f0e 100644
--- a/drivers/video/fbdev/hgafb.c
+++ b/drivers/video/fbdev/hgafb.c
@@ -558,7 +558,7 @@ static int hgafb_probe(struct platform_device *pdev)
 	int ret;
 
 	ret = hga_card_detect();
-	if (!ret)
+	if (ret)
 		return ret;
 
 	printk(KERN_INFO "hgafb: %s with %ldK of memory detected.\n",
diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
index a7e6eea2c4a1..23999df52739 100644
--- a/drivers/video/fbdev/hyperv_fb.c
+++ b/drivers/video/fbdev/hyperv_fb.c
@@ -52,6 +52,7 @@
 #include <linux/completion.h>
 #include <linux/fb.h>
 #include <linux/pci.h>
+#include <linux/panic_notifier.h>
 #include <linux/efi.h>
 #include <linux/console.h>
 
diff --git a/drivers/video/fbdev/xilinxfb.c b/drivers/video/fbdev/xilinxfb.c
index ffbf900648d9..438e2c78142f 100644
--- a/drivers/video/fbdev/xilinxfb.c
+++ b/drivers/video/fbdev/xilinxfb.c
@@ -241,6 +241,8 @@ xilinx_fb_blank(int blank_mode, struct fb_info *fbi)
 	case FB_BLANK_POWERDOWN:
 		/* turn off panel */
 		xilinx_fb_out32(drvdata, REG_CTRL, 0);
+		break;
+
 	default:
 		break;
 	}