diff options
author | Arnd Bergmann <arnd@arndb.de> | 2022-06-06 10:41:04 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2022-06-10 15:37:59 +0200 |
commit | 3493536142000805c1492a0d9d5b6c03a725711d (patch) | |
tree | 6752f0c5019f39abea5b03378722a13f0bc211e2 /drivers/vme/boards | |
parent | staging: olpc_dcon: Replace flush_scheduled_work() with flush_work(). (diff) | |
download | linux-3493536142000805c1492a0d9d5b6c03a725711d.tar.xz linux-3493536142000805c1492a0d9d5b6c03a725711d.zip |
vme: remove ca91cx42 Universe-II support
This is one of four remaining drivers using the ancient
virt_to_bus() interface instead of the dma-mapping interface,
making it incompatible with most modern machines.
As nobody has cleaned this up, there is a high chance that this
driver has no actual users. The chip was introduced in 1997 and
only supports 32-bit legacy PCI. It was replaced by TSI148 in
2004, but that chip has since been discontinued, while a version
of the older Universe II remains in production after 25 years.
The vme_vmivme7805 board uses Universe-II, so this also gets
removed in the process, but PCI add-on cards based on TSI148
can still work in theory.
If there are users of the Universe-II driver after all, it is
of course possible to revert this patch and fix it to use the
dma-mapping interface like the tsi148 driver does.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220606084109.4108188-2-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/vme/boards')
-rw-r--r-- | drivers/vme/boards/Kconfig | 10 | ||||
-rw-r--r-- | drivers/vme/boards/Makefile | 6 | ||||
-rw-r--r-- | drivers/vme/boards/vme_vmivme7805.c | 106 | ||||
-rw-r--r-- | drivers/vme/boards/vme_vmivme7805.h | 33 |
4 files changed, 0 insertions, 155 deletions
diff --git a/drivers/vme/boards/Kconfig b/drivers/vme/boards/Kconfig deleted file mode 100644 index 7a255f72980b..000000000000 --- a/drivers/vme/boards/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -comment "VME Board Drivers" - -config VMIVME_7805 - tristate "VMIVME-7805" - help - If you say Y here you get support for the VMIVME-7805 board. - This board has an additional control interface to the Universe II - chip. This driver has to be included if you want to access VME bus - with VMIVME-7805 board. diff --git a/drivers/vme/boards/Makefile b/drivers/vme/boards/Makefile deleted file mode 100644 index 87122381452c..000000000000 --- a/drivers/vme/boards/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for the VME board drivers. -# - -obj-$(CONFIG_VMIVME_7805) += vme_vmivme7805.o diff --git a/drivers/vme/boards/vme_vmivme7805.c b/drivers/vme/boards/vme_vmivme7805.c deleted file mode 100644 index 51e056bae943..000000000000 --- a/drivers/vme/boards/vme_vmivme7805.c +++ /dev/null @@ -1,106 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Support for the VMIVME-7805 board access to the Universe II bridge. - * - * Author: Arthur Benilov <arthur.benilov@iba-group.com> - * Copyright 2010 Ion Beam Application, Inc. - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/poll.h> -#include <linux/io.h> - -#include "vme_vmivme7805.h" - -static int vmic_probe(struct pci_dev *, const struct pci_device_id *); -static void vmic_remove(struct pci_dev *); - -/** Base address to access FPGA register */ -static void __iomem *vmic_base; - -static const char driver_name[] = "vmivme_7805"; - -static const struct pci_device_id vmic_ids[] = { - { PCI_DEVICE(PCI_VENDOR_ID_VMIC, PCI_DEVICE_ID_VTIMR) }, - { }, -}; - -static struct pci_driver vmic_driver = { - .name = driver_name, - .id_table = vmic_ids, - .probe = vmic_probe, - .remove = vmic_remove, -}; - -static int vmic_probe(struct pci_dev *pdev, const struct pci_device_id *id) -{ - int retval; - u32 data; - - /* Enable the device */ - retval = pci_enable_device(pdev); - if (retval) { - dev_err(&pdev->dev, "Unable to enable device\n"); - goto err; - } - - /* Map Registers */ - retval = pci_request_regions(pdev, driver_name); - if (retval) { - dev_err(&pdev->dev, "Unable to reserve resources\n"); - goto err_resource; - } - - /* Map registers in BAR 0 */ - vmic_base = ioremap(pci_resource_start(pdev, 0), 16); - if (!vmic_base) { - dev_err(&pdev->dev, "Unable to remap CRG region\n"); - retval = -EIO; - goto err_remap; - } - - /* Clear the FPGA VME IF contents */ - iowrite32(0, vmic_base + VME_CONTROL); - - /* Clear any initial BERR */ - data = ioread32(vmic_base + VME_CONTROL) & 0x00000FFF; - data |= BM_VME_CONTROL_BERRST; - iowrite32(data, vmic_base + VME_CONTROL); - - /* Enable the vme interface and byte swapping */ - data = ioread32(vmic_base + VME_CONTROL) & 0x00000FFF; - data = data | BM_VME_CONTROL_MASTER_ENDIAN | - BM_VME_CONTROL_SLAVE_ENDIAN | - BM_VME_CONTROL_ABLE | - BM_VME_CONTROL_BERRI | - BM_VME_CONTROL_BPENA | - BM_VME_CONTROL_VBENA; - iowrite32(data, vmic_base + VME_CONTROL); - - return 0; - -err_remap: - pci_release_regions(pdev); -err_resource: - pci_disable_device(pdev); -err: - return retval; -} - -static void vmic_remove(struct pci_dev *pdev) -{ - iounmap(vmic_base); - pci_release_regions(pdev); - pci_disable_device(pdev); - -} - -module_pci_driver(vmic_driver); - -MODULE_DESCRIPTION("VMIVME-7805 board support driver"); -MODULE_AUTHOR("Arthur Benilov <arthur.benilov@iba-group.com>"); -MODULE_LICENSE("GPL"); - diff --git a/drivers/vme/boards/vme_vmivme7805.h b/drivers/vme/boards/vme_vmivme7805.h deleted file mode 100644 index c2c5e3053d3f..000000000000 --- a/drivers/vme/boards/vme_vmivme7805.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * vmivme_7805.h - * - * Support for the VMIVME-7805 board access to the Universe II bridge. - * - * Author: Arthur Benilov <arthur.benilov@iba-group.com> - * Copyright 2010 Ion Beam Application, Inc. - */ - - -#ifndef _VMIVME_7805_H -#define _VMIVME_7805_H - -#ifndef PCI_VENDOR_ID_VMIC -#define PCI_VENDOR_ID_VMIC 0x114A -#endif - -#ifndef PCI_DEVICE_ID_VTIMR -#define PCI_DEVICE_ID_VTIMR 0x0004 -#endif - -#define VME_CONTROL 0x0000 -#define BM_VME_CONTROL_MASTER_ENDIAN 0x0001 -#define BM_VME_CONTROL_SLAVE_ENDIAN 0x0002 -#define BM_VME_CONTROL_ABLE 0x0004 -#define BM_VME_CONTROL_BERRI 0x0040 -#define BM_VME_CONTROL_BERRST 0x0080 -#define BM_VME_CONTROL_BPENA 0x0400 -#define BM_VME_CONTROL_VBENA 0x0800 - -#endif /* _VMIVME_7805_H */ - |