Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (38 commits)
  [ARM] 5191/1: ARM: remove CVS keywords
  [ARM] pxafb: fix the warning of incorrect lccr when lcd_conn is specified
  [ARM] pxafb: add flag to specify output format on LDD pins when base is RGBT16
  [ARM] pxafb: fix the incorrect configuration of GPIO77 as ACBIAS for TFT LCD
  [ARM] 5198/1: PalmTX: PCMCIA fixes
  [ARM] Fix a pile of broken watchdog drivers
  [ARM] update mach-types
  [ARM] 5196/1: fix inline asm constraints for preload
  [ARM] 5194/1: update .gitignore
  [ARM] add proc-macros.S include to proc-arm940 and proc-arm946
  [ARM] 5192/1: ARM TLB: add v7wbi_{possible,always}_flags to {possible,always}_tlb_flags
  [ARM] 5193/1: Wire up missing syscalls
  [ARM] traps: don't call undef hook functions with spinlock held
  [ARM] 5183/2: Provide Poodle LoCoMo GPIO names
  [ARM] dma-mapping: provide sync_range APIs
  [ARM] dma-mapping: improve type-safeness of DMA translations
  [ARM] Kirkwood: instantiate the orion_spi driver in the platform code
  [ARM] prevent crashing when too much RAM installed
  [ARM] Kirkwood: Instantiate mv_xor driver
  [ARM] Orion: Instantiate mv_xor driver for 5182
  ...

7 files changed, 92 insertions, 34 deletions

diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index a4e4494663bf..0328da020a10 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -25,7 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/memory.h>
-#include <asm/plat-orion/mv_xor.h>
+#include <plat/mv_xor.h>
 #include "mv_xor.h"
 
 static void mv_xor_issue_pending(struct dma_chan *chan);
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 64002488c6ee..917cf8d3ae95 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -19,7 +19,7 @@
 #include <asm/io.h>
 #include <asm/sizes.h>
 #include <mach/hardware.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <plat/orion_nand.h>
 
 #ifdef CONFIG_MTD_CMDLINE_PARTS
 static const char *part_probes[] = { "cmdlinepart", NULL };
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
index a8771ffc61e8..e07b5c51ec5b 100644
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -23,12 +23,57 @@
 
 static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
-	skt->irq = IRQ_GPIO(GPIO_NR_PALMTX_PCMCIA_READY);
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER1, 0);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER2, 0);
+	if (ret)
+		goto err3;
+
+	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_RESET, "PCMCIA RST");
+	if (ret)
+		goto err3;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_RESET, 1);
+	if (ret)
+		goto err4;
+
+	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_READY, "PCMCIA RDY");
+	if (ret)
+		goto err4;
+	ret = gpio_direction_input(GPIO_NR_PALMTX_PCMCIA_READY);
+	if (ret)
+		goto err5;
+
+	skt->irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
 	return 0;
+
+err5:
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+err4:
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+err3:
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+err2:
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
+err1:
+	return ret;
 }
 
 static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
 }
 
 static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
@@ -109,7 +154,7 @@ static void __exit palmtx_pcmcia_exit(void)
 	platform_device_unregister(palmtx_pcmcia_device);
 }
 
-fs_initcall(palmtx_pcmcia_init);
+module_init(palmtx_pcmcia_init);
 module_exit(palmtx_pcmcia_exit);
 
 MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 3b4a14e355c1..77cb34270fc1 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -449,6 +449,7 @@ config SERIAL_CLPS711X_CONSOLE
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
 	depends on ARM && PLAT_S3C24XX
+	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
 	  providing /dev/ttySAC0, 1 and 2 (note, some machines may not
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 5fbdc14e63b3..5416cf969005 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -12,7 +12,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/mbus.h>
-#include <asm/plat-orion/ehci-orion.h>
+#include <plat/ehci-orion.h>
 
 #define rdl(off)	__raw_readl(hcd->regs + (off))
 #define wrl(off, val)	__raw_writel((val), hcd->regs + (off))
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index e7aa7ae8fca8..97204497d9f7 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1031,7 +1031,9 @@ static void pxafb_setup_gpio(struct pxafb_info *fbi)
 	pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
 	pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
 	pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
-	pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
+
+	if ((lccr0 & LCCR0_PAS) == 0)
+		pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
 }
 
 static void pxafb_enable_controller(struct pxafb_info *fbi)
@@ -1400,6 +1402,8 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi,
 	if (lcd_conn == LCD_MONO_STN_8BPP)
 		fbi->lccr0 |= LCCR0_DPD;
 
+	fbi->lccr0 |= (lcd_conn & LCD_ALTERNATE_MAPPING) ? LCCR0_LDDALT : 0;
+
 	fbi->lccr3 = LCCR3_Acb((inf->lcd_conn >> 10) & 0xff);
 	fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
 	fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL)  ? LCCR3_PCP : 0;
@@ -1673,53 +1677,63 @@ MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
 #define pxafb_setup_options()		(0)
 #endif
 
-static int __devinit pxafb_probe(struct platform_device *dev)
-{
-	struct pxafb_info *fbi;
-	struct pxafb_mach_info *inf;
-	struct resource *r;
-	int irq, ret;
-
-	dev_dbg(&dev->dev, "pxafb_probe\n");
-
-	inf = dev->dev.platform_data;
-	ret = -ENOMEM;
-	fbi = NULL;
-	if (!inf)
-		goto failed;
-
-	ret = pxafb_parse_options(&dev->dev, g_options);
-	if (ret < 0)
-		goto failed;
-
 #ifdef DEBUG_VAR
-	/* Check for various illegal bit-combinations. Currently only
-	 * a warning is given. */
+/* Check for various illegal bit-combinations. Currently only
+ * a warning is given. */
+static void __devinit pxafb_check_options(struct device *dev,
+					  struct pxafb_mach_info *inf)
+{
+	if (inf->lcd_conn)
+		return;
 
 	if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
-		dev_warn(&dev->dev, "machine LCCR0 setting contains "
+		dev_warn(dev, "machine LCCR0 setting contains "
 				"illegal bits: %08x\n",
 			inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
 	if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
-		dev_warn(&dev->dev, "machine LCCR3 setting contains "
+		dev_warn(dev, "machine LCCR3 setting contains "
 				"illegal bits: %08x\n",
 			inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
 	if (inf->lccr0 & LCCR0_DPD &&
 	    ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
 	     (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
 	     (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
-		dev_warn(&dev->dev, "Double Pixel Data (DPD) mode is "
+		dev_warn(dev, "Double Pixel Data (DPD) mode is "
 				"only valid in passive mono"
 				" single panel mode\n");
 	if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
 	    (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
-		dev_warn(&dev->dev, "Dual panel only valid in passive mode\n");
+		dev_warn(dev, "Dual panel only valid in passive mode\n");
 	if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
 	     (inf->modes->upper_margin || inf->modes->lower_margin))
-		dev_warn(&dev->dev, "Upper and lower margins must be 0 in "
+		dev_warn(dev, "Upper and lower margins must be 0 in "
 				"passive mode\n");
+}
+#else
+#define pxafb_check_options(...)	do {} while (0)
 #endif
 
+static int __devinit pxafb_probe(struct platform_device *dev)
+{
+	struct pxafb_info *fbi;
+	struct pxafb_mach_info *inf;
+	struct resource *r;
+	int irq, ret;
+
+	dev_dbg(&dev->dev, "pxafb_probe\n");
+
+	inf = dev->dev.platform_data;
+	ret = -ENOMEM;
+	fbi = NULL;
+	if (!inf)
+		goto failed;
+
+	ret = pxafb_parse_options(&dev->dev, g_options);
+	if (ret < 0)
+		goto failed;
+
+	pxafb_check_options(&dev->dev, inf);
+
 	dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n",
 			inf->modes->xres,
 			inf->modes->yres,
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 3da2b90d2fe6..22715e3be5e7 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -157,8 +157,6 @@ static void s3c2410wdt_start(void)
 	writel(wdt_count, wdt_base + S3C2410_WTCNT);
 	writel(wtcon, wdt_base + S3C2410_WTCON);
 	spin_unlock(&wdt_lock);
-
-	return 0;
 }
 
 static int s3c2410wdt_set_heartbeat(int timeout)