Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (30 commits)
  USB: Fix a bug on appledisplay.c regarding signedness
  USB: option: support hi speed for modem Haier CE100
  USB: audio gadget: free alsa devices when unloading
  USB: audio gadget: fix wTotalLength calculation
  usb: otg: isp1301_omap: fix compile error
  USB: musb: workaround Blackfin FIFO anomalies
  USB: musb: Fix array index out of bounds issue
  USB: musb: Fix null pointer dereference issue
  USB: musb: correct DMA address for tx
  USB: musb: gadget_ep0: avoid SetupEnd interrupt
  USB: musb: fix for crash in DM646x USB when (CPPI)DMA is enabled
  USB: musb: do not work if no gadget driver is loaded
  USB: musb: gadget: set otg tranceiver to idle when registering gadget
  USB: musb: Populate the VBUS GPIO with the correct GPIO number
  USB: musb: MAINTAINERS: Fix my tree's address
  USB: musb: fix compiling warning with min() macro
  USB: musb: move musb_remove to __exit
  USB: musb_gadget: fix kernel oops in txstate()
  USB: ftdi_sio: sort PID/VID entries in new ftdi_sio_ids.h header
  USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h header
  ...

25 files changed, 1200 insertions, 1062 deletions

diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 473aa1a20de9..be3c9b80bc9f 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -44,5 +44,3 @@ obj-y				+= early/
 
 obj-$(CONFIG_USB_ATM)		+= atm/
 obj-$(CONFIG_USB_SPEEDTOUCH)	+= atm/
-
-obj-$(CONFIG_USB_ULPI)		+= otg/
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 6dac3b802d41..0495fa651225 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1597,7 +1597,9 @@ rescan:
 }
 
 /**
- * Check whether a new bandwidth setting exceeds the bus bandwidth.
+ * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds
+ *				the bus bandwidth
+ * @udev: target &usb_device
  * @new_config: new configuration to install
  * @cur_alt: the current alternate interface setting
  * @new_alt: alternate interface setting that is being installed
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 06af970e1064..0cec6caf6e9b 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1658,12 +1658,12 @@ static inline void announce_device(struct usb_device *udev) { }
 #endif
 
 /**
- * usb_configure_device_otg - FIXME (usbcore-internal)
+ * usb_enumerate_device_otg - FIXME (usbcore-internal)
  * @udev: newly addressed device (in ADDRESS state)
  *
- * Do configuration for On-The-Go devices
+ * Finish enumeration for On-The-Go devices
  */
-static int usb_configure_device_otg(struct usb_device *udev)
+static int usb_enumerate_device_otg(struct usb_device *udev)
 {
 	int err = 0;
 
@@ -1734,7 +1734,7 @@ fail:
 
 
 /**
- * usb_configure_device - Detect and probe device intfs/otg (usbcore-internal)
+ * usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal)
  * @udev: newly addressed device (in ADDRESS state)
  *
  * This is only called by usb_new_device() and usb_authorize_device()
@@ -1745,7 +1745,7 @@ fail:
  * the string descriptors, as they will be errored out by the device
  * until it has been authorized.
  */
-static int usb_configure_device(struct usb_device *udev)
+static int usb_enumerate_device(struct usb_device *udev)
 {
 	int err;
 
@@ -1769,7 +1769,7 @@ static int usb_configure_device(struct usb_device *udev)
 						      udev->descriptor.iManufacturer);
 		udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
 	}
-	err = usb_configure_device_otg(udev);
+	err = usb_enumerate_device_otg(udev);
 fail:
 	return err;
 }
@@ -1779,8 +1779,8 @@ fail:
  * usb_new_device - perform initial device setup (usbcore-internal)
  * @udev: newly addressed device (in ADDRESS state)
  *
- * This is called with devices which have been enumerated, but not yet
- * configured.  The device descriptor is available, but not descriptors
+ * This is called with devices which have been detected but not fully
+ * enumerated.  The device descriptor is available, but not descriptors
  * for any device configuration.  The caller must have locked either
  * the parent hub (if udev is a normal device) or else the
  * usb_bus_list_lock (if udev is a root hub).  The parent's pointer to
@@ -1803,8 +1803,8 @@ int usb_new_device(struct usb_device *udev)
 	if (udev->parent)
 		usb_autoresume_device(udev->parent);
 
-	usb_detect_quirks(udev);		/* Determine quirks */
-	err = usb_configure_device(udev);	/* detect & probe dev/intfs */
+	usb_detect_quirks(udev);
+	err = usb_enumerate_device(udev);	/* Read descriptors */
 	if (err < 0)
 		goto fail;
 	dev_dbg(&udev->dev, "udev %d, busnum %d, minor = %d\n",
@@ -1849,21 +1849,23 @@ fail:
  */
 int usb_deauthorize_device(struct usb_device *usb_dev)
 {
-	unsigned cnt;
 	usb_lock_device(usb_dev);
 	if (usb_dev->authorized == 0)
 		goto out_unauthorized;
+
 	usb_dev->authorized = 0;
 	usb_set_configuration(usb_dev, -1);
+
+	kfree(usb_dev->product);
 	usb_dev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+	kfree(usb_dev->manufacturer);
 	usb_dev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+	kfree(usb_dev->serial);
 	usb_dev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-	kfree(usb_dev->config);
-	usb_dev->config = NULL;
-	for (cnt = 0; cnt < usb_dev->descriptor.bNumConfigurations; cnt++)
-		kfree(usb_dev->rawdescriptors[cnt]);
+
+	usb_destroy_configuration(usb_dev);
 	usb_dev->descriptor.bNumConfigurations = 0;
-	kfree(usb_dev->rawdescriptors);
+
 out_unauthorized:
 	usb_unlock_device(usb_dev);
 	return 0;
@@ -1873,15 +1875,11 @@ out_unauthorized:
 int usb_authorize_device(struct usb_device *usb_dev)
 {
 	int result = 0, c;
+
 	usb_lock_device(usb_dev);
 	if (usb_dev->authorized == 1)
 		goto out_authorized;
-	kfree(usb_dev->product);
-	usb_dev->product = NULL;
-	kfree(usb_dev->manufacturer);
-	usb_dev->manufacturer = NULL;
-	kfree(usb_dev->serial);
-	usb_dev->serial = NULL;
+
 	result = usb_autoresume_device(usb_dev);
 	if (result < 0) {
 		dev_err(&usb_dev->dev,
@@ -1894,10 +1892,18 @@ int usb_authorize_device(struct usb_device *usb_dev)
 			"authorization: %d\n", result);
 		goto error_device_descriptor;
 	}
+
+	kfree(usb_dev->product);
+	usb_dev->product = NULL;
+	kfree(usb_dev->manufacturer);
+	usb_dev->manufacturer = NULL;
+	kfree(usb_dev->serial);
+	usb_dev->serial = NULL;
+
 	usb_dev->authorized = 1;
-	result = usb_configure_device(usb_dev);
+	result = usb_enumerate_device(usb_dev);
 	if (result < 0)
-		goto error_configure;
+		goto error_enumerate;
 	/* Choose and set the configuration.  This registers the interfaces
 	 * with the driver core and lets interface drivers bind to them.
 	 */
@@ -1912,8 +1918,10 @@ int usb_authorize_device(struct usb_device *usb_dev)
 		}
 	}
 	dev_info(&usb_dev->dev, "authorized to connect\n");
-error_configure:
+
+error_enumerate:
 error_device_descriptor:
+	usb_autosuspend_device(usb_dev);
 error_autoresume:
 out_authorized:
 	usb_unlock_device(usb_dev);	// complements locktree
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 15477008b631..485edf937f25 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -82,9 +82,13 @@ static ssize_t  show_##name(struct device *dev,				\
 		struct device_attribute *attr, char *buf)		\
 {									\
 	struct usb_device *udev;					\
+	int retval;							\
 									\
 	udev = to_usb_device(dev);					\
-	return sprintf(buf, "%s\n", udev->name);			\
+	usb_lock_device(udev);						\
+	retval = sprintf(buf, "%s\n", udev->name);			\
+	usb_unlock_device(udev);					\
+	return retval;							\
 }									\
 static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL);
 
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 2fb42043b305..0daff0d968ba 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -66,9 +66,9 @@ MODULE_PARM_DESC(autosuspend, "default autosuspend delay");
 /**
  * usb_find_alt_setting() - Given a configuration, find the alternate setting
  * for the given interface.
- * @config - the configuration to search (not necessarily the current config).
- * @iface_num - interface number to search in
- * @alt_num - alternate interface setting number to search for.
+ * @config: the configuration to search (not necessarily the current config).
+ * @iface_num: interface number to search in
+ * @alt_num: alternate interface setting number to search for.
  *
  * Search the configuration's interface cache for the given alt setting.
  */
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index 1206a26ef893..2958a1271b20 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -613,7 +613,7 @@ err:
 }
 EXPORT_SYMBOL_GPL(dbgp_external_startup);
 
-static int __init ehci_reset_port(int port)
+static int ehci_reset_port(int port)
 {
 	u32 portsc;
 	u32 delay_time, delay;
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 58f220323847..a62af7b59094 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -158,6 +158,7 @@ fail:
 
 static int __exit audio_unbind(struct usb_composite_dev *cdev)
 {
+	gaudio_cleanup();
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index c43c89ffa2c8..df77f6131c73 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -56,13 +56,16 @@ static struct usb_interface_descriptor ac_interface_desc __initdata = {
 DECLARE_UAC_AC_HEADER_DESCRIPTOR(2);
 
 #define UAC_DT_AC_HEADER_LENGTH	UAC_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES)
+/* 1 input terminal, 1 output terminal and 1 feature unit */
+#define UAC_DT_TOTAL_LENGTH (UAC_DT_AC_HEADER_LENGTH + UAC_DT_INPUT_TERMINAL_SIZE \
+	+ UAC_DT_OUTPUT_TERMINAL_SIZE + UAC_DT_FEATURE_UNIT_SIZE(0))
 /* B.3.2  Class-Specific AC Interface Descriptor */
 static struct uac_ac_header_descriptor_2 ac_header_desc = {
 	.bLength =		UAC_DT_AC_HEADER_LENGTH,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubtype =	UAC_HEADER,
 	.bcdADC =		__constant_cpu_to_le16(0x0100),
-	.wTotalLength =		__constant_cpu_to_le16(UAC_DT_AC_HEADER_LENGTH),
+	.wTotalLength =		__constant_cpu_to_le16(UAC_DT_TOTAL_LENGTH),
 	.bInCollection =	F_AUDIO_NUM_INTERFACES,
 	.baInterfaceNr = {
 		[0] =		F_AUDIO_AC_INTERFACE,
@@ -252,12 +255,12 @@ static struct f_audio_buf *f_audio_buffer_alloc(int buf_size)
 
 	copy_buf = kzalloc(sizeof *copy_buf, GFP_ATOMIC);
 	if (!copy_buf)
-		return (struct f_audio_buf *)-ENOMEM;
+		return ERR_PTR(-ENOMEM);
 
 	copy_buf->buf = kzalloc(buf_size, GFP_ATOMIC);
 	if (!copy_buf->buf) {
 		kfree(copy_buf);
-		return (struct f_audio_buf *)-ENOMEM;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	return copy_buf;
@@ -332,7 +335,7 @@ static int f_audio_out_ep_complete(struct usb_ep *ep, struct usb_request *req)
 		list_add_tail(&copy_buf->list, &audio->play_queue);
 		schedule_work(&audio->playback_work);
 		copy_buf = f_audio_buffer_alloc(audio_buf_size);
-		if (copy_buf < 0)
+		if (IS_ERR(copy_buf))
 			return -ENOMEM;
 	}
 
@@ -576,6 +579,8 @@ static int f_audio_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 			usb_ep_enable(out_ep, audio->out_desc);
 			out_ep->driver_data = audio;
 			audio->copy_buf = f_audio_buffer_alloc(audio_buf_size);
+			if (IS_ERR(audio->copy_buf))
+				return -ENOMEM;
 
 			/*
 			 * allocate a bunch of read buffers
@@ -787,7 +792,7 @@ int __init audio_bind_config(struct usb_configuration *c)
 	return status;
 
 add_fail:
-	gaudio_cleanup(&audio->card);
+	gaudio_cleanup();
 setup_fail:
 	kfree(audio);
 	return status;
diff --git a/drivers/usb/gadget/u_audio.c b/drivers/usb/gadget/u_audio.c
index 8252595d619d..35e0930f5bbb 100644
--- a/drivers/usb/gadget/u_audio.c
+++ b/drivers/usb/gadget/u_audio.c
@@ -288,6 +288,7 @@ static int gaudio_close_snd_dev(struct gaudio *gau)
 	return 0;
 }
 
+static struct gaudio *the_card;
 /**
  * gaudio_setup - setup ALSA interface and preparing for USB transfer
  *
@@ -303,6 +304,9 @@ int __init gaudio_setup(struct gaudio *card)
 	if (ret)
 		ERROR(card, "we need at least one control device\n");
 
+	if (!the_card)
+		the_card = card;
+
 	return ret;
 
 }
@@ -312,9 +316,11 @@ int __init gaudio_setup(struct gaudio *card)
  *
  * This is called to free all resources allocated by @gaudio_setup().
  */
-void gaudio_cleanup(struct gaudio *card)
+void gaudio_cleanup(void)
 {
-	if (card)
-		gaudio_close_snd_dev(card);
+	if (the_card) {
+		gaudio_close_snd_dev(the_card);
+		the_card = NULL;
+	}
 }
 
diff --git a/drivers/usb/gadget/u_audio.h b/drivers/usb/gadget/u_audio.h
index cc8d159c648a..08ffce3298e6 100644
--- a/drivers/usb/gadget/u_audio.h
+++ b/drivers/usb/gadget/u_audio.h
@@ -51,6 +51,6 @@ struct gaudio {
 };
 
 int gaudio_setup(struct gaudio *card);
-void gaudio_cleanup(struct gaudio *card);
+void gaudio_cleanup(void);
 
 #endif /* __U_AUDIO_H */
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index 1d8e39a557d9..1eb9e4162cc6 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -60,6 +60,7 @@
 static struct usb_device_id appledisplay_table [] = {
 	{ APPLEDISPLAY_DEVICE(0x9218) },
 	{ APPLEDISPLAY_DEVICE(0x9219) },
+	{ APPLEDISPLAY_DEVICE(0x921c) },
 	{ APPLEDISPLAY_DEVICE(0x921d) },
 
 	/* Terminating entry */
@@ -72,8 +73,8 @@ struct appledisplay {
 	struct usb_device *udev;	/* usb device */
 	struct urb *urb;		/* usb request block */
 	struct backlight_device *bd;	/* backlight device */
-	char *urbdata;			/* interrupt URB data buffer */
-	char *msgdata;			/* control message data buffer */
+	u8 *urbdata;			/* interrupt URB data buffer */
+	u8 *msgdata;			/* control message data buffer */
 
 	struct delayed_work work;
 	int button_pressed;
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 602ee05ba9ff..59860b328534 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -167,7 +167,7 @@ static int emi62_load_firmware (struct usb_device *dev)
 			err("%s - error loading firmware: error = %d", __func__, err);
 			goto wraperr;
 		}
-	} while (i > 0);
+	} while (rec);
 
 	/* Assert reset (stop the CPU in the EMI) */
 	err = emi62_set_reset(dev,1);
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index fe4934d9602c..ad26e6569665 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -29,6 +29,8 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
 {
 	void __iomem *fifo = hw_ep->fifo;
 	void __iomem *epio = hw_ep->regs;
+	u8 epnum = hw_ep->epnum;
+	u16 dma_reg = 0;
 
 	prefetch((u8 *)src);
 
@@ -39,67 +41,113 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
 
 	dump_fifo_data(src, len);
 
-	if (unlikely((unsigned long)src & 0x01))
-		outsw_8((unsigned long)fifo, src,
-			len & 0x01 ? (len >> 1) + 1 : len >> 1);
-	else
-		outsw((unsigned long)fifo, src,
-			len & 0x01 ? (len >> 1) + 1 : len >> 1);
-}
+	if (!ANOMALY_05000380 && epnum != 0) {
+		flush_dcache_range((unsigned int)src,
+			(unsigned int)(src + len));
+
+		/* Setup DMA address register */
+		dma_reg = (u16) ((u32) src & 0xFFFF);
+		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
+		SSYNC();
+
+		dma_reg = (u16) (((u32) src >> 16) & 0xFFFF);
+		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
+		SSYNC();
+
+		/* Setup DMA count register */
+		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
+		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
+		SSYNC();
+
+		/* Enable the DMA */
+		dma_reg = (epnum << 4) | DMA_ENA | INT_ENA | DIRECTION;
+		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
+		SSYNC();
+
+		/* Wait for compelete */
+		while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
+			cpu_relax();
+
+		/* acknowledge dma interrupt */
+		bfin_write_USB_DMA_INTERRUPT(1 << epnum);
+		SSYNC();
+
+		/* Reset DMA */
+		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
+		SSYNC();
+	} else {
+		SSYNC();
+
+		if (unlikely((unsigned long)src & 0x01))
+			outsw_8((unsigned long)fifo, src,
+				len & 0x01 ? (len >> 1) + 1 : len >> 1);
+		else
+			outsw((unsigned long)fifo, src,
+				len & 0x01 ? (len >> 1) + 1 : len >> 1);
 
+	}
+}
 /*
  * Unload an endpoint's FIFO
  */
 void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 {
 	void __iomem *fifo = hw_ep->fifo;
-
-#ifdef CONFIG_BF52x
 	u8 epnum = hw_ep->epnum;
 	u16 dma_reg = 0;
 
-	invalidate_dcache_range((unsigned int)dst,
-		(unsigned int)(dst + len));
+	if (ANOMALY_05000467 && epnum != 0) {
 
-	/* Setup DMA address register */
-	dma_reg = (u16) ((u32) dst & 0xFFFF);
-	bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
-	SSYNC();
+		invalidate_dcache_range((unsigned int)dst,
+			(unsigned int)(dst + len));
 
-	dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF);
-	bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
-	SSYNC();
+		/* Setup DMA address register */
+		dma_reg = (u16) ((u32) dst & 0xFFFF);
+		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
+		SSYNC();
 
-	/* Setup DMA count register */
-	bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
-	bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
-	SSYNC();
+		dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF);
+		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
+		SSYNC();
 
-	/* Enable the DMA */
-	dma_reg = (epnum << 4) | DMA_ENA | INT_ENA;
-	bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
-	SSYNC();
+		/* Setup DMA count register */
+		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
+		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
+		SSYNC();
 
-	/* Wait for compelete */
-	while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
-		cpu_relax();
+		/* Enable the DMA */
+		dma_reg = (epnum << 4) | DMA_ENA | INT_ENA;
+		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
+		SSYNC();
 
-	/* acknowledge dma interrupt */
-	bfin_write_USB_DMA_INTERRUPT(1 << epnum);
-	SSYNC();
+		/* Wait for compelete */
+		while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
+			cpu_relax();
 
-	/* Reset DMA */
-	bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
-	SSYNC();
-#else
-	if (unlikely((unsigned long)dst & 0x01))
-		insw_8((unsigned long)fifo, dst,
-			len & 0x01 ? (len >> 1) + 1 : len >> 1);
-	else
-		insw((unsigned long)fifo, dst,
-			len & 0x01 ? (len >> 1) + 1 : len >> 1);
-#endif
+		/* acknowledge dma interrupt */
+		bfin_write_USB_DMA_INTERRUPT(1 << epnum);
+		SSYNC();
 
+		/* Reset DMA */
+		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
+		SSYNC();
+	} else {
+		SSYNC();
+		/* Read the last byte of packet with odd size from address fifo + 4
+		 * to trigger 1 byte access to EP0 FIFO.
+		 */
+		if (len == 1)
+			*dst = (u8)inw((unsigned long)fifo + 4);
+		else {
+			if (unlikely((unsigned long)dst & 0x01))
+				insw_8((unsigned long)fifo, dst, len >> 1);
+			else
+				insw((unsigned long)fifo, dst, len >> 1);
+
+			if (len & 0x01)
+				*(dst + len - 1) = (u8)inw((unsigned long)fifo + 4);
+		}
+	}
 	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
 			'R', hw_ep->epnum, fifo, len, dst);
 
diff --git a/drivers/usb/musb/blackfin.h b/drivers/usb/musb/blackfin.h
index 10b7d7584f4b..bd9352a2ef2a 100644
--- a/drivers/usb/musb/blackfin.h
+++ b/drivers/usb/musb/blackfin.h
@@ -69,7 +69,6 @@ static void dump_fifo_data(u8 *buf, u16 len)
 #define dump_fifo_data(buf, len)	do {} while (0)
 #endif
 
-#ifdef CONFIG_BF52x
 
 #define USB_DMA_BASE		USB_DMA_INTERRUPT
 #define USB_DMAx_CTRL		0x04
@@ -79,7 +78,6 @@ static void dump_fifo_data(u8 *buf, u16 len)
 #define USB_DMAx_COUNT_HIGH	0x14
 
 #define USB_DMA_REG(ep, reg)	(USB_DMA_BASE + 0x20 * ep + reg)
-#endif
 
 /* Almost 1 second */
 #define TIMER_DELAY	(1 * HZ)
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index ef2332a9941d..a44a450c860d 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -1154,8 +1154,11 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id)
 	struct musb_hw_ep	*hw_ep = NULL;
 	u32			rx, tx;
 	int			i, index;
+	unsigned long		flags;
 
 	cppi = container_of(musb->dma_controller, struct cppi, controller);
+	if (cppi->irq)
+		spin_lock_irqsave(&musb->lock, flags);
 
 	tibase = musb->ctrl_base;
 
@@ -1285,6 +1288,9 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id)
 	/* write to CPPI EOI register to re-enable interrupts */
 	musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0);
 
+	if (cppi->irq)
+		spin_unlock_irqrestore(&musb->lock, flags);
+
 	return IRQ_HANDLED;
 }
 
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index e16ff605c458..66913811af5e 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -42,7 +42,7 @@
 #include "musb_core.h"
 
 #ifdef CONFIG_MACH_DAVINCI_EVM
-#define GPIO_nVBUS_DRV		144
+#define GPIO_nVBUS_DRV		160
 #endif
 
 #include "davinci.h"
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index bfe08f4975a3..5eb9318cff77 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1319,7 +1319,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 #endif
 	u8 reg;
 	char *type;
-	char aInfo[78], aRevision[32], aDate[12];
+	char aInfo[90], aRevision[32], aDate[12];
 	void __iomem	*mbase = musb->mregs;
 	int		status = 0;
 	int		i;
@@ -1521,6 +1521,14 @@ irqreturn_t musb_interrupt(struct musb *musb)
 		(devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral",
 		musb->int_usb, musb->int_tx, musb->int_rx);
 
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	if (is_otg_enabled(musb) || is_peripheral_enabled(musb))
+		if (!musb->gadget_driver) {
+			DBG(5, "No gadget driver loaded\n");
+			return IRQ_HANDLED;
+		}
+#endif
+
 	/* the core can interrupt us for multiple reasons; docs have
 	 * a generic interrupt flowchart to follow
 	 */
@@ -2139,7 +2147,7 @@ static int __init musb_probe(struct platform_device *pdev)
 	return musb_init_controller(dev, irq, base);
 }
 
-static int __devexit musb_remove(struct platform_device *pdev)
+static int __exit musb_remove(struct platform_device *pdev)
 {
 	struct musb	*musb = dev_to_musb(&pdev->dev);
 	void __iomem	*ctrl_base = musb->ctrl_base;
@@ -2231,7 +2239,7 @@ static struct platform_driver musb_driver = {
 		.owner		= THIS_MODULE,
 		.pm		= MUSB_DEV_PM_OPS,
 	},
-	.remove		= __devexit_p(musb_remove),
+	.remove		= __exit_p(musb_remove),
 	.shutdown	= musb_shutdown,
 };
 
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index c49b9ba025ab..cbcf14a236e6 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -309,7 +309,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
 			size_t request_size;
 
 			/* setup DMA, then program endpoint CSR */
-			request_size = min(request->length,
+			request_size = min_t(size_t, request->length,
 						musb_ep->dma->max_len);
 			if (request_size < musb_ep->packet_sz)
 				musb_ep->dma->desired_mode = 0;
@@ -319,7 +319,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
 			use_dma = use_dma && c->channel_program(
 					musb_ep->dma, musb_ep->packet_sz,
 					musb_ep->dma->desired_mode,
-					request->dma, request_size);
+					request->dma + request->actual, request_size);
 			if (use_dma) {
 				if (musb_ep->dma->desired_mode == 0) {
 					/*
@@ -515,12 +515,12 @@ void musb_g_tx(struct musb *musb, u8 epnum)
 			if (csr & MUSB_TXCSR_FIFONOTEMPTY)
 				return;
 
-			if (!musb_ep->desc) {
+			request = musb_ep->desc ? next_request(musb_ep) : NULL;
+			if (!request) {
 				DBG(4, "%s idle now\n",
 					musb_ep->end_point.name);
 				return;
-			} else
-				request = next_request(musb_ep);
+			}
 		}
 
 		txstate(musb, to_musb_request(request));
@@ -746,6 +746,8 @@ void musb_g_rx(struct musb *musb, u8 epnum)
 	musb_ep_select(mbase, epnum);
 
 	request = next_request(musb_ep);
+	if (!request)
+		return;
 
 	csr = musb_readw(epio, MUSB_RXCSR);
 	dma = is_dma_capable() ? musb_ep->dma : NULL;
@@ -1731,6 +1733,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 		spin_lock_irqsave(&musb->lock, flags);
 
 		otg_set_peripheral(musb->xceiv, &musb->g);
+		musb->xceiv->state = OTG_STATE_B_IDLE;
 		musb->is_active = 1;
 
 		/* FIXME this ignores the softconnect flag.  Drivers are
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 8fba3f11e473..53d06451f820 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -664,7 +664,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
 			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
 			break;
 		default:
-			ERR("SetupEnd came in a wrong ep0stage %s",
+			ERR("SetupEnd came in a wrong ep0stage %s\n",
 			    decode_ep0stage(musb->ep0_state));
 		}
 		csr = musb_readw(regs, MUSB_CSR0);
@@ -787,12 +787,18 @@ setup:
 				handled = service_zero_data_request(
 						musb, &setup);
 
+				/*
+				 * We're expecting no data in any case, so
+				 * always set the DATAEND bit -- doing this
+				 * here helps avoid SetupEnd interrupt coming
+				 * in the idle stage when we're stalling...
+				 */
+				musb->ackpend |= MUSB_CSR0_P_DATAEND;
+
 				/* status stage might be immediate */
-				if (handled > 0) {
-					musb->ackpend |= MUSB_CSR0_P_DATAEND;
+				if (handled > 0)
 					musb->ep0_state =
 						MUSB_EP0_STAGE_STATUSIN;
-				}
 				break;
 
 			/* sequence #1 (IN to host), includes GET_STATUS
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index d54460a88173..78a209709260 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -843,7 +843,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
 
 static struct platform_device *otg_dev;
 
-static int otg_init(struct isp1301 *isp)
+static int isp1301_otg_init(struct isp1301 *isp)
 {
 	u32 l;
 
@@ -1275,7 +1275,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c)
 static int isp1301_otg_enable(struct isp1301 *isp)
 {
 	power_up(isp);
-	otg_init(isp);
+	isp1301_otg_init(isp);
 
 	/* NOTE:  since we don't change this, this provides
 	 * a few more interrupts than are strictly needed.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f99498fca99a..216f187582ab 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -44,6 +44,7 @@
 #include <linux/serial.h>
 #include <linux/usb/serial.h>
 #include "ftdi_sio.h"
+#include "ftdi_sio_ids.h"
 
 /*
  * Version Information
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 4586a24fafb0..b0e0d64f822e 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -1,7 +1,10 @@
 /*
- * Definitions for the FTDI USB Single Port Serial Converter -
+ * Driver definitions for the FTDI USB Single Port Serial Converter -
  * known as FTDI_SIO (Serial Input/Output application of the chipset)
  *
+ * For USB vendor/product IDs (VID/PID), please see ftdi_sio_ids.h
+ *
+ *
  * The example I have is known as the USC-1000 which is available from
  * http://www.dse.co.nz - cat no XH4214 It looks similar to this:
  * http://www.dansdata.com/usbser.htm but I can't be sure There are other
@@ -17,880 +20,7 @@
  * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the
  * FTDI_SIO implementation.
  *
- * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
- * from Rudolf Gugler
- *
- */
-
-#define FTDI_VID	0x0403	/* Vendor Id */
-#define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX  */
-#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
-#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
-#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
-#define FTDI_232RL_PID  0xFBFA  /* Product ID for FT232RL */
-#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
-#define FTDI_RELAIS_PID	0xFA10  /* Relais device from Rudolf Gugler */
-#define FTDI_NF_RIC_VID	0x0DCD	/* Vendor Id */
-#define FTDI_NF_RIC_PID	0x0001	/* Product Id */
-#define FTDI_USBX_707_PID 0xF857	/* ADSTech IR Blaster USBX-707 */
-
-/* Larsen and Brusgaard AltiTrack/USBtrack  */
-#define LARSENBRUSGAARD_VID		0x0FD8
-#define LB_ALTITRACK_PID		0x0001
-
-/* www.canusb.com Lawicel CANUSB device */
-#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
-
-/* AlphaMicro Components AMC-232USB01 device */
-#define FTDI_AMC232_PID 0xFF00 /* Product Id */
-
-/* www.candapter.com Ewert Energy Systems CANdapter device */
-#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
-
-/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
-/* the VID is the standard ftdi vid (FTDI_VID) */
-#define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
-#define FTDI_SCS_DEVICE_1_PID 0xD011    /* SCS Tracker / DSP TNC */
-#define FTDI_SCS_DEVICE_2_PID 0xD012
-#define FTDI_SCS_DEVICE_3_PID 0xD013
-#define FTDI_SCS_DEVICE_4_PID 0xD014
-#define FTDI_SCS_DEVICE_5_PID 0xD015
-#define FTDI_SCS_DEVICE_6_PID 0xD016
-#define FTDI_SCS_DEVICE_7_PID 0xD017
-
-/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
-#define FTDI_ACTZWAVE_PID	0xF2D0
-
-
-/* www.starting-point-systems.com µChameleon device */
-#define FTDI_MICRO_CHAMELEON_PID	0xCAA0	/* Product Id */
-
-/* www.irtrans.de device */
-#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
-
-
-/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
-#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
-
-/* iPlus device */
-#define FTDI_IPLUS_PID 0xD070 /* Product Id */
-#define FTDI_IPLUS2_PID 0xD071 /* Product Id */
-
-/* DMX4ALL DMX Interfaces */
-#define FTDI_DMX4ALL 0xC850
-
-/* OpenDCC (www.opendcc.de) product id */
-#define FTDI_OPENDCC_PID	0xBFD8
-#define FTDI_OPENDCC_SNIFFER_PID	0xBFD9
-#define FTDI_OPENDCC_THROTTLE_PID	0xBFDA
-#define FTDI_OPENDCC_GATEWAY_PID	0xBFDB
-
-/* Sprog II (Andrew Crosland's SprogII DCC interface) */
-#define FTDI_SPROG_II		0xF0C8
-
-/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
-/* they use the ftdi chipset for the USB interface and the vendor id is the same */
-#define FTDI_XF_632_PID 0xFC08	/* 632: 16x2 Character Display */
-#define FTDI_XF_634_PID 0xFC09	/* 634: 20x4 Character Display */
-#define FTDI_XF_547_PID 0xFC0A	/* 547: Two line Display */
-#define FTDI_XF_633_PID 0xFC0B	/* 633: 16x2 Character Display with Keys */
-#define FTDI_XF_631_PID 0xFC0C	/* 631: 20x2 Character Display */
-#define FTDI_XF_635_PID 0xFC0D	/* 635: 20x4 Character Display */
-#define FTDI_XF_640_PID 0xFC0E	/* 640: Two line Display */
-#define FTDI_XF_642_PID 0xFC0F	/* 642: Two line Display */
-
-/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */
-/* broadband internet service.  The following PID is exhibited by the usb device supplied */
-/* (the VID is the standard ftdi vid (FTDI_VID) */
-#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
-
-/*
- * PCDJ use ftdi based dj-controllers.  The following PID is for their DAC-2 device
- * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen)
- * (the VID is the standard ftdi vid (FTDI_VID) */
-#define FTDI_PCDJ_DAC2_PID 0xFA88
-
-/*
- * The following are the values for the Matrix Orbital LCD displays,
- * which are the FT232BM ( similar to the 8U232AM )
- */
-#define FTDI_MTXORB_0_PID      0xFA00  /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_1_PID      0xFA01  /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_2_PID      0xFA02  /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_3_PID      0xFA03  /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_4_PID      0xFA04  /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_5_PID      0xFA05  /* Matrix Orbital Product Id */
-#define FTDI_MTXORB_6_PID      0xFA06  /* Matrix Orbital Product Id */
-
-/* OOCDlink by Joern Kaipf <joernk@web.de>
- * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
-#define FTDI_OOCDLINK_PID	0xbaf8	/* Amontec JTAGkey */
-
-/*
- * The following are the values for the Matrix Orbital FTDI Range
- * Anything in this range will use an FT232RL.
- */
-#define MTXORB_VID			0x1B3D
-#define MTXORB_FTDI_RANGE_0100_PID	0x0100
-#define MTXORB_FTDI_RANGE_0101_PID	0x0101
-#define MTXORB_FTDI_RANGE_0102_PID	0x0102
-#define MTXORB_FTDI_RANGE_0103_PID	0x0103
-#define MTXORB_FTDI_RANGE_0104_PID	0x0104
-#define MTXORB_FTDI_RANGE_0105_PID	0x0105
-#define MTXORB_FTDI_RANGE_0106_PID	0x0106
-#define MTXORB_FTDI_RANGE_0107_PID	0x0107
-#define MTXORB_FTDI_RANGE_0108_PID	0x0108
-#define MTXORB_FTDI_RANGE_0109_PID	0x0109
-#define MTXORB_FTDI_RANGE_010A_PID	0x010A
-#define MTXORB_FTDI_RANGE_010B_PID	0x010B
-#define MTXORB_FTDI_RANGE_010C_PID	0x010C
-#define MTXORB_FTDI_RANGE_010D_PID	0x010D
-#define MTXORB_FTDI_RANGE_010E_PID	0x010E
-#define MTXORB_FTDI_RANGE_010F_PID	0x010F
-#define MTXORB_FTDI_RANGE_0110_PID	0x0110
-#define MTXORB_FTDI_RANGE_0111_PID	0x0111
-#define MTXORB_FTDI_RANGE_0112_PID	0x0112
-#define MTXORB_FTDI_RANGE_0113_PID	0x0113
-#define MTXORB_FTDI_RANGE_0114_PID	0x0114
-#define MTXORB_FTDI_RANGE_0115_PID	0x0115
-#define MTXORB_FTDI_RANGE_0116_PID	0x0116
-#define MTXORB_FTDI_RANGE_0117_PID	0x0117
-#define MTXORB_FTDI_RANGE_0118_PID	0x0118
-#define MTXORB_FTDI_RANGE_0119_PID	0x0119
-#define MTXORB_FTDI_RANGE_011A_PID	0x011A
-#define MTXORB_FTDI_RANGE_011B_PID	0x011B
-#define MTXORB_FTDI_RANGE_011C_PID	0x011C
-#define MTXORB_FTDI_RANGE_011D_PID	0x011D
-#define MTXORB_FTDI_RANGE_011E_PID	0x011E
-#define MTXORB_FTDI_RANGE_011F_PID	0x011F
-#define MTXORB_FTDI_RANGE_0120_PID	0x0120
-#define MTXORB_FTDI_RANGE_0121_PID	0x0121
-#define MTXORB_FTDI_RANGE_0122_PID	0x0122
-#define MTXORB_FTDI_RANGE_0123_PID	0x0123
-#define MTXORB_FTDI_RANGE_0124_PID	0x0124
-#define MTXORB_FTDI_RANGE_0125_PID	0x0125
-#define MTXORB_FTDI_RANGE_0126_PID	0x0126
-#define MTXORB_FTDI_RANGE_0127_PID	0x0127
-#define MTXORB_FTDI_RANGE_0128_PID	0x0128
-#define MTXORB_FTDI_RANGE_0129_PID	0x0129
-#define MTXORB_FTDI_RANGE_012A_PID	0x012A
-#define MTXORB_FTDI_RANGE_012B_PID	0x012B
-#define MTXORB_FTDI_RANGE_012C_PID	0x012C
-#define MTXORB_FTDI_RANGE_012D_PID	0x012D
-#define MTXORB_FTDI_RANGE_012E_PID	0x012E
-#define MTXORB_FTDI_RANGE_012F_PID	0x012F
-#define MTXORB_FTDI_RANGE_0130_PID	0x0130
-#define MTXORB_FTDI_RANGE_0131_PID	0x0131
-#define MTXORB_FTDI_RANGE_0132_PID	0x0132
-#define MTXORB_FTDI_RANGE_0133_PID	0x0133
-#define MTXORB_FTDI_RANGE_0134_PID	0x0134
-#define MTXORB_FTDI_RANGE_0135_PID	0x0135
-#define MTXORB_FTDI_RANGE_0136_PID	0x0136
-#define MTXORB_FTDI_RANGE_0137_PID	0x0137
-#define MTXORB_FTDI_RANGE_0138_PID	0x0138
-#define MTXORB_FTDI_RANGE_0139_PID	0x0139
-#define MTXORB_FTDI_RANGE_013A_PID	0x013A
-#define MTXORB_FTDI_RANGE_013B_PID	0x013B
-#define MTXORB_FTDI_RANGE_013C_PID	0x013C
-#define MTXORB_FTDI_RANGE_013D_PID	0x013D
-#define MTXORB_FTDI_RANGE_013E_PID	0x013E
-#define MTXORB_FTDI_RANGE_013F_PID	0x013F
-#define MTXORB_FTDI_RANGE_0140_PID	0x0140
-#define MTXORB_FTDI_RANGE_0141_PID	0x0141
-#define MTXORB_FTDI_RANGE_0142_PID	0x0142
-#define MTXORB_FTDI_RANGE_0143_PID	0x0143
-#define MTXORB_FTDI_RANGE_0144_PID	0x0144
-#define MTXORB_FTDI_RANGE_0145_PID	0x0145
-#define MTXORB_FTDI_RANGE_0146_PID	0x0146
-#define MTXORB_FTDI_RANGE_0147_PID	0x0147
-#define MTXORB_FTDI_RANGE_0148_PID	0x0148
-#define MTXORB_FTDI_RANGE_0149_PID	0x0149
-#define MTXORB_FTDI_RANGE_014A_PID	0x014A
-#define MTXORB_FTDI_RANGE_014B_PID	0x014B
-#define MTXORB_FTDI_RANGE_014C_PID	0x014C
-#define MTXORB_FTDI_RANGE_014D_PID	0x014D
-#define MTXORB_FTDI_RANGE_014E_PID	0x014E
-#define MTXORB_FTDI_RANGE_014F_PID	0x014F
-#define MTXORB_FTDI_RANGE_0150_PID	0x0150
-#define MTXORB_FTDI_RANGE_0151_PID	0x0151
-#define MTXORB_FTDI_RANGE_0152_PID	0x0152
-#define MTXORB_FTDI_RANGE_0153_PID	0x0153
-#define MTXORB_FTDI_RANGE_0154_PID	0x0154
-#define MTXORB_FTDI_RANGE_0155_PID	0x0155
-#define MTXORB_FTDI_RANGE_0156_PID	0x0156
-#define MTXORB_FTDI_RANGE_0157_PID	0x0157
-#define MTXORB_FTDI_RANGE_0158_PID	0x0158
-#define MTXORB_FTDI_RANGE_0159_PID	0x0159
-#define MTXORB_FTDI_RANGE_015A_PID	0x015A
-#define MTXORB_FTDI_RANGE_015B_PID	0x015B
-#define MTXORB_FTDI_RANGE_015C_PID	0x015C
-#define MTXORB_FTDI_RANGE_015D_PID	0x015D
-#define MTXORB_FTDI_RANGE_015E_PID	0x015E
-#define MTXORB_FTDI_RANGE_015F_PID	0x015F
-#define MTXORB_FTDI_RANGE_0160_PID	0x0160
-#define MTXORB_FTDI_RANGE_0161_PID	0x0161
-#define MTXORB_FTDI_RANGE_0162_PID	0x0162
-#define MTXORB_FTDI_RANGE_0163_PID	0x0163
-#define MTXORB_FTDI_RANGE_0164_PID	0x0164
-#define MTXORB_FTDI_RANGE_0165_PID	0x0165
-#define MTXORB_FTDI_RANGE_0166_PID	0x0166
-#define MTXORB_FTDI_RANGE_0167_PID	0x0167
-#define MTXORB_FTDI_RANGE_0168_PID	0x0168
-#define MTXORB_FTDI_RANGE_0169_PID	0x0169
-#define MTXORB_FTDI_RANGE_016A_PID	0x016A
-#define MTXORB_FTDI_RANGE_016B_PID	0x016B
-#define MTXORB_FTDI_RANGE_016C_PID	0x016C
-#define MTXORB_FTDI_RANGE_016D_PID	0x016D
-#define MTXORB_FTDI_RANGE_016E_PID	0x016E
-#define MTXORB_FTDI_RANGE_016F_PID	0x016F
-#define MTXORB_FTDI_RANGE_0170_PID	0x0170
-#define MTXORB_FTDI_RANGE_0171_PID	0x0171
-#define MTXORB_FTDI_RANGE_0172_PID	0x0172
-#define MTXORB_FTDI_RANGE_0173_PID	0x0173
-#define MTXORB_FTDI_RANGE_0174_PID	0x0174
-#define MTXORB_FTDI_RANGE_0175_PID	0x0175
-#define MTXORB_FTDI_RANGE_0176_PID	0x0176
-#define MTXORB_FTDI_RANGE_0177_PID	0x0177
-#define MTXORB_FTDI_RANGE_0178_PID	0x0178
-#define MTXORB_FTDI_RANGE_0179_PID	0x0179
-#define MTXORB_FTDI_RANGE_017A_PID	0x017A
-#define MTXORB_FTDI_RANGE_017B_PID	0x017B
-#define MTXORB_FTDI_RANGE_017C_PID	0x017C
-#define MTXORB_FTDI_RANGE_017D_PID	0x017D
-#define MTXORB_FTDI_RANGE_017E_PID	0x017E
-#define MTXORB_FTDI_RANGE_017F_PID	0x017F
-#define MTXORB_FTDI_RANGE_0180_PID	0x0180
-#define MTXORB_FTDI_RANGE_0181_PID	0x0181
-#define MTXORB_FTDI_RANGE_0182_PID	0x0182
-#define MTXORB_FTDI_RANGE_0183_PID	0x0183
-#define MTXORB_FTDI_RANGE_0184_PID	0x0184
-#define MTXORB_FTDI_RANGE_0185_PID	0x0185
-#define MTXORB_FTDI_RANGE_0186_PID	0x0186
-#define MTXORB_FTDI_RANGE_0187_PID	0x0187
-#define MTXORB_FTDI_RANGE_0188_PID	0x0188
-#define MTXORB_FTDI_RANGE_0189_PID	0x0189
-#define MTXORB_FTDI_RANGE_018A_PID	0x018A
-#define MTXORB_FTDI_RANGE_018B_PID	0x018B
-#define MTXORB_FTDI_RANGE_018C_PID	0x018C
-#define MTXORB_FTDI_RANGE_018D_PID	0x018D
-#define MTXORB_FTDI_RANGE_018E_PID	0x018E
-#define MTXORB_FTDI_RANGE_018F_PID	0x018F
-#define MTXORB_FTDI_RANGE_0190_PID	0x0190
-#define MTXORB_FTDI_RANGE_0191_PID	0x0191
-#define MTXORB_FTDI_RANGE_0192_PID	0x0192
-#define MTXORB_FTDI_RANGE_0193_PID	0x0193
-#define MTXORB_FTDI_RANGE_0194_PID	0x0194
-#define MTXORB_FTDI_RANGE_0195_PID	0x0195
-#define MTXORB_FTDI_RANGE_0196_PID	0x0196
-#define MTXORB_FTDI_RANGE_0197_PID	0x0197
-#define MTXORB_FTDI_RANGE_0198_PID	0x0198
-#define MTXORB_FTDI_RANGE_0199_PID	0x0199
-#define MTXORB_FTDI_RANGE_019A_PID	0x019A
-#define MTXORB_FTDI_RANGE_019B_PID	0x019B
-#define MTXORB_FTDI_RANGE_019C_PID	0x019C
-#define MTXORB_FTDI_RANGE_019D_PID	0x019D
-#define MTXORB_FTDI_RANGE_019E_PID	0x019E
-#define MTXORB_FTDI_RANGE_019F_PID	0x019F
-#define MTXORB_FTDI_RANGE_01A0_PID	0x01A0
-#define MTXORB_FTDI_RANGE_01A1_PID	0x01A1
-#define MTXORB_FTDI_RANGE_01A2_PID	0x01A2
-#define MTXORB_FTDI_RANGE_01A3_PID	0x01A3
-#define MTXORB_FTDI_RANGE_01A4_PID	0x01A4
-#define MTXORB_FTDI_RANGE_01A5_PID	0x01A5
-#define MTXORB_FTDI_RANGE_01A6_PID	0x01A6
-#define MTXORB_FTDI_RANGE_01A7_PID	0x01A7
-#define MTXORB_FTDI_RANGE_01A8_PID	0x01A8
-#define MTXORB_FTDI_RANGE_01A9_PID	0x01A9
-#define MTXORB_FTDI_RANGE_01AA_PID	0x01AA
-#define MTXORB_FTDI_RANGE_01AB_PID	0x01AB
-#define MTXORB_FTDI_RANGE_01AC_PID	0x01AC
-#define MTXORB_FTDI_RANGE_01AD_PID	0x01AD
-#define MTXORB_FTDI_RANGE_01AE_PID	0x01AE
-#define MTXORB_FTDI_RANGE_01AF_PID	0x01AF
-#define MTXORB_FTDI_RANGE_01B0_PID	0x01B0
-#define MTXORB_FTDI_RANGE_01B1_PID	0x01B1
-#define MTXORB_FTDI_RANGE_01B2_PID	0x01B2
-#define MTXORB_FTDI_RANGE_01B3_PID	0x01B3
-#define MTXORB_FTDI_RANGE_01B4_PID	0x01B4
-#define MTXORB_FTDI_RANGE_01B5_PID	0x01B5
-#define MTXORB_FTDI_RANGE_01B6_PID	0x01B6
-#define MTXORB_FTDI_RANGE_01B7_PID	0x01B7
-#define MTXORB_FTDI_RANGE_01B8_PID	0x01B8
-#define MTXORB_FTDI_RANGE_01B9_PID	0x01B9
-#define MTXORB_FTDI_RANGE_01BA_PID	0x01BA
-#define MTXORB_FTDI_RANGE_01BB_PID	0x01BB
-#define MTXORB_FTDI_RANGE_01BC_PID	0x01BC
-#define MTXORB_FTDI_RANGE_01BD_PID	0x01BD
-#define MTXORB_FTDI_RANGE_01BE_PID	0x01BE
-#define MTXORB_FTDI_RANGE_01BF_PID	0x01BF
-#define MTXORB_FTDI_RANGE_01C0_PID	0x01C0
-#define MTXORB_FTDI_RANGE_01C1_PID	0x01C1
-#define MTXORB_FTDI_RANGE_01C2_PID	0x01C2
-#define MTXORB_FTDI_RANGE_01C3_PID	0x01C3
-#define MTXORB_FTDI_RANGE_01C4_PID	0x01C4
-#define MTXORB_FTDI_RANGE_01C5_PID	0x01C5
-#define MTXORB_FTDI_RANGE_01C6_PID	0x01C6
-#define MTXORB_FTDI_RANGE_01C7_PID	0x01C7
-#define MTXORB_FTDI_RANGE_01C8_PID	0x01C8
-#define MTXORB_FTDI_RANGE_01C9_PID	0x01C9
-#define MTXORB_FTDI_RANGE_01CA_PID	0x01CA
-#define MTXORB_FTDI_RANGE_01CB_PID	0x01CB
-#define MTXORB_FTDI_RANGE_01CC_PID	0x01CC
-#define MTXORB_FTDI_RANGE_01CD_PID	0x01CD
-#define MTXORB_FTDI_RANGE_01CE_PID	0x01CE
-#define MTXORB_FTDI_RANGE_01CF_PID	0x01CF
-#define MTXORB_FTDI_RANGE_01D0_PID	0x01D0
-#define MTXORB_FTDI_RANGE_01D1_PID	0x01D1
-#define MTXORB_FTDI_RANGE_01D2_PID	0x01D2
-#define MTXORB_FTDI_RANGE_01D3_PID	0x01D3
-#define MTXORB_FTDI_RANGE_01D4_PID	0x01D4
-#define MTXORB_FTDI_RANGE_01D5_PID	0x01D5
-#define MTXORB_FTDI_RANGE_01D6_PID	0x01D6
-#define MTXORB_FTDI_RANGE_01D7_PID	0x01D7
-#define MTXORB_FTDI_RANGE_01D8_PID	0x01D8
-#define MTXORB_FTDI_RANGE_01D9_PID	0x01D9
-#define MTXORB_FTDI_RANGE_01DA_PID	0x01DA
-#define MTXORB_FTDI_RANGE_01DB_PID	0x01DB
-#define MTXORB_FTDI_RANGE_01DC_PID	0x01DC
-#define MTXORB_FTDI_RANGE_01DD_PID	0x01DD
-#define MTXORB_FTDI_RANGE_01DE_PID	0x01DE
-#define MTXORB_FTDI_RANGE_01DF_PID	0x01DF
-#define MTXORB_FTDI_RANGE_01E0_PID	0x01E0
-#define MTXORB_FTDI_RANGE_01E1_PID	0x01E1
-#define MTXORB_FTDI_RANGE_01E2_PID	0x01E2
-#define MTXORB_FTDI_RANGE_01E3_PID	0x01E3
-#define MTXORB_FTDI_RANGE_01E4_PID	0x01E4
-#define MTXORB_FTDI_RANGE_01E5_PID	0x01E5
-#define MTXORB_FTDI_RANGE_01E6_PID	0x01E6
-#define MTXORB_FTDI_RANGE_01E7_PID	0x01E7
-#define MTXORB_FTDI_RANGE_01E8_PID	0x01E8
-#define MTXORB_FTDI_RANGE_01E9_PID	0x01E9
-#define MTXORB_FTDI_RANGE_01EA_PID	0x01EA
-#define MTXORB_FTDI_RANGE_01EB_PID	0x01EB
-#define MTXORB_FTDI_RANGE_01EC_PID	0x01EC
-#define MTXORB_FTDI_RANGE_01ED_PID	0x01ED
-#define MTXORB_FTDI_RANGE_01EE_PID	0x01EE
-#define MTXORB_FTDI_RANGE_01EF_PID	0x01EF
-#define MTXORB_FTDI_RANGE_01F0_PID	0x01F0
-#define MTXORB_FTDI_RANGE_01F1_PID	0x01F1
-#define MTXORB_FTDI_RANGE_01F2_PID	0x01F2
-#define MTXORB_FTDI_RANGE_01F3_PID	0x01F3
-#define MTXORB_FTDI_RANGE_01F4_PID	0x01F4
-#define MTXORB_FTDI_RANGE_01F5_PID	0x01F5
-#define MTXORB_FTDI_RANGE_01F6_PID	0x01F6
-#define MTXORB_FTDI_RANGE_01F7_PID	0x01F7
-#define MTXORB_FTDI_RANGE_01F8_PID	0x01F8
-#define MTXORB_FTDI_RANGE_01F9_PID	0x01F9
-#define MTXORB_FTDI_RANGE_01FA_PID	0x01FA
-#define MTXORB_FTDI_RANGE_01FB_PID	0x01FB
-#define MTXORB_FTDI_RANGE_01FC_PID	0x01FC
-#define MTXORB_FTDI_RANGE_01FD_PID	0x01FD
-#define MTXORB_FTDI_RANGE_01FE_PID	0x01FE
-#define MTXORB_FTDI_RANGE_01FF_PID	0x01FF
-
-
-
-/* Interbiometrics USB I/O Board */
-/* Developed for Interbiometrics by Rudolf Gugler */
-#define INTERBIOMETRICS_VID              0x1209
-#define INTERBIOMETRICS_IOBOARD_PID      0x1002
-#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
-
-/*
- * The following are the values for the Perle Systems
- * UltraPort USB serial converters
- */
-#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0	/* Perle UltraPort Product Id */
-
-/*
- * The following are the values for the Sealevel SeaLINK+ adapters.
- * (Original list sent by Tuan Hoang.  Ian Abbott renamed the macros and
- * removed some PIDs that don't seem to match any existing products.)
- */
-#define SEALEVEL_VID		0x0c52	/* Sealevel Vendor ID */
-#define SEALEVEL_2101_PID	0x2101	/* SeaLINK+232 (2101/2105) */
-#define SEALEVEL_2102_PID	0x2102	/* SeaLINK+485 (2102) */
-#define SEALEVEL_2103_PID	0x2103	/* SeaLINK+232I (2103) */
-#define SEALEVEL_2104_PID	0x2104	/* SeaLINK+485I (2104) */
-#define SEALEVEL_2106_PID	0x9020	/* SeaLINK+422 (2106) */
-#define SEALEVEL_2201_1_PID	0x2211	/* SeaPORT+2/232 (2201) Port 1 */
-#define SEALEVEL_2201_2_PID	0x2221	/* SeaPORT+2/232 (2201) Port 2 */
-#define SEALEVEL_2202_1_PID	0x2212	/* SeaPORT+2/485 (2202) Port 1 */
-#define SEALEVEL_2202_2_PID	0x2222	/* SeaPORT+2/485 (2202) Port 2 */
-#define SEALEVEL_2203_1_PID	0x2213	/* SeaPORT+2 (2203) Port 1 */
-#define SEALEVEL_2203_2_PID	0x2223	/* SeaPORT+2 (2203) Port 2 */
-#define SEALEVEL_2401_1_PID	0x2411	/* SeaPORT+4/232 (2401) Port 1 */
-#define SEALEVEL_2401_2_PID	0x2421	/* SeaPORT+4/232 (2401) Port 2 */
-#define SEALEVEL_2401_3_PID	0x2431	/* SeaPORT+4/232 (2401) Port 3 */
-#define SEALEVEL_2401_4_PID	0x2441	/* SeaPORT+4/232 (2401) Port 4 */
-#define SEALEVEL_2402_1_PID	0x2412	/* SeaPORT+4/485 (2402) Port 1 */
-#define SEALEVEL_2402_2_PID	0x2422	/* SeaPORT+4/485 (2402) Port 2 */
-#define SEALEVEL_2402_3_PID	0x2432	/* SeaPORT+4/485 (2402) Port 3 */
-#define SEALEVEL_2402_4_PID	0x2442	/* SeaPORT+4/485 (2402) Port 4 */
-#define SEALEVEL_2403_1_PID	0x2413	/* SeaPORT+4 (2403) Port 1 */
-#define SEALEVEL_2403_2_PID	0x2423	/* SeaPORT+4 (2403) Port 2 */
-#define SEALEVEL_2403_3_PID	0x2433	/* SeaPORT+4 (2403) Port 3 */
-#define SEALEVEL_2403_4_PID	0x2443	/* SeaPORT+4 (2403) Port 4 */
-#define SEALEVEL_2801_1_PID	0X2811	/* SeaLINK+8/232 (2801) Port 1 */
-#define SEALEVEL_2801_2_PID	0X2821	/* SeaLINK+8/232 (2801) Port 2 */
-#define SEALEVEL_2801_3_PID	0X2831	/* SeaLINK+8/232 (2801) Port 3 */
-#define SEALEVEL_2801_4_PID	0X2841	/* SeaLINK+8/232 (2801) Port 4 */
-#define SEALEVEL_2801_5_PID	0X2851	/* SeaLINK+8/232 (2801) Port 5 */
-#define SEALEVEL_2801_6_PID	0X2861	/* SeaLINK+8/232 (2801) Port 6 */
-#define SEALEVEL_2801_7_PID	0X2871	/* SeaLINK+8/232 (2801) Port 7 */
-#define SEALEVEL_2801_8_PID	0X2881	/* SeaLINK+8/232 (2801) Port 8 */
-#define SEALEVEL_2802_1_PID	0X2812	/* SeaLINK+8/485 (2802) Port 1 */
-#define SEALEVEL_2802_2_PID	0X2822	/* SeaLINK+8/485 (2802) Port 2 */
-#define SEALEVEL_2802_3_PID	0X2832	/* SeaLINK+8/485 (2802) Port 3 */
-#define SEALEVEL_2802_4_PID	0X2842	/* SeaLINK+8/485 (2802) Port 4 */
-#define SEALEVEL_2802_5_PID	0X2852	/* SeaLINK+8/485 (2802) Port 5 */
-#define SEALEVEL_2802_6_PID	0X2862	/* SeaLINK+8/485 (2802) Port 6 */
-#define SEALEVEL_2802_7_PID	0X2872	/* SeaLINK+8/485 (2802) Port 7 */
-#define SEALEVEL_2802_8_PID	0X2882	/* SeaLINK+8/485 (2802) Port 8 */
-#define SEALEVEL_2803_1_PID	0X2813	/* SeaLINK+8 (2803) Port 1 */
-#define SEALEVEL_2803_2_PID	0X2823 	/* SeaLINK+8 (2803) Port 2 */
-#define SEALEVEL_2803_3_PID	0X2833 	/* SeaLINK+8 (2803) Port 3 */
-#define SEALEVEL_2803_4_PID	0X2843 	/* SeaLINK+8 (2803) Port 4 */
-#define SEALEVEL_2803_5_PID	0X2853 	/* SeaLINK+8 (2803) Port 5 */
-#define SEALEVEL_2803_6_PID	0X2863 	/* SeaLINK+8 (2803) Port 6 */
-#define SEALEVEL_2803_7_PID	0X2873 	/* SeaLINK+8 (2803) Port 7 */
-#define SEALEVEL_2803_8_PID	0X2883 	/* SeaLINK+8 (2803) Port 8 */
-
-/*
- * The following are the values for two KOBIL chipcard terminals.
- */
-#define KOBIL_VID		0x0d46	/* KOBIL Vendor ID */
-#define KOBIL_CONV_B1_PID	0x2020	/* KOBIL Konverter for B1 */
-#define KOBIL_CONV_KAAN_PID	0x2021	/* KOBIL_Konverter for KAAN */
-
-/*
- * Icom ID-1 digital transceiver
- */
-
-#define ICOM_ID1_VID            0x0C26
-#define ICOM_ID1_PID            0x0004
-
-/*
- * ASK.fr devices
- */
-#define FTDI_ASK_RDR400_PID	0xC991	/* ASK RDR 400 series card reader */
-
-/*
- * FTDI USB UART chips used in construction projects from the
- * Elektor Electronics magazine (http://elektor-electronics.co.uk)
- */
-#define ELEKTOR_VID		0x0C7D
-#define ELEKTOR_FT323R_PID	0x0005	/* RFID-Reader, issue 09-2006 */
-
-/*
- * DSS-20 Sync Station for Sony Ericsson P800
- */
-#define FTDI_DSS20_PID          0xFC82
-
-/*
- * Home Electronics (www.home-electro.com) USB gadgets
- */
-#define FTDI_HE_TIRA1_PID	0xFA78	/* Tira-1 IR transceiver */
-
-/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
-/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
-#define FTDI_USB_UIRT_PID	0xF850	/* Product Id */
-
-/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
-
-#define FTDI_TNC_X_PID		0xEBE0
-
-/*
- * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
- * All of these devices use FTDI's vendor ID (0x0403).
- *
- * The previously included PID for the UO 100 module was incorrect.
- * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
- *
- * Armin Laeuger originally sent the PID for the UM 100 module.
- */
-#define FTDI_R2000KU_TRUE_RNG	0xFB80  /* R2000KU TRUE RNG */
-#define FTDI_ELV_UR100_PID	0xFB58	/* USB-RS232-Umsetzer (UR 100) */
-#define FTDI_ELV_UM100_PID	0xFB5A	/* USB-Modul UM 100 */
-#define FTDI_ELV_UO100_PID	0xFB5B	/* USB-Modul UO 100 */
-#define FTDI_ELV_ALC8500_PID	0xF06E	/* ALC 8500 Expert */
-/* Additional ELV PIDs that default to using the FTDI D2XX drivers on
- * MS Windows, rather than the FTDI Virtual Com Port drivers.
- * Maybe these will be easier to use with the libftdi/libusb user-space
- * drivers, or possibly the Comedi drivers in some cases. */
-#define FTDI_ELV_CLI7000_PID	0xFB59	/* Computer-Light-Interface (CLI 7000) */
-#define FTDI_ELV_PPS7330_PID	0xFB5C	/* Processor-Power-Supply (PPS 7330) */
-#define FTDI_ELV_TFM100_PID	0xFB5D	/* Temperartur-Feuchte Messgeraet (TFM 100) */
-#define FTDI_ELV_UDF77_PID	0xFB5E	/* USB DCF Funkurh (UDF 77) */
-#define FTDI_ELV_UIO88_PID	0xFB5F	/* USB-I/O Interface (UIO 88) */
-#define FTDI_ELV_UAD8_PID	0xF068	/* USB-AD-Wandler (UAD 8) */
-#define FTDI_ELV_UDA7_PID	0xF069	/* USB-DA-Wandler (UDA 7) */
-#define FTDI_ELV_USI2_PID	0xF06A	/* USB-Schrittmotoren-Interface (USI 2) */
-#define FTDI_ELV_T1100_PID	0xF06B	/* Thermometer (T 1100) */
-#define FTDI_ELV_PCD200_PID	0xF06C	/* PC-Datenlogger (PCD 200) */
-#define FTDI_ELV_ULA200_PID	0xF06D	/* USB-LCD-Ansteuerung (ULA 200) */
-#define FTDI_ELV_FHZ1000PC_PID	0xF06F	/* FHZ 1000 PC */
-#define FTDI_ELV_CSI8_PID	0xE0F0	/* Computer-Schalt-Interface (CSI 8) */
-#define FTDI_ELV_EM1000DL_PID	0xE0F1	/* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
-#define FTDI_ELV_PCK100_PID	0xE0F2	/* PC-Kabeltester (PCK 100) */
-#define FTDI_ELV_RFP500_PID	0xE0F3	/* HF-Leistungsmesser (RFP 500) */
-#define FTDI_ELV_FS20SIG_PID	0xE0F4	/* Signalgeber (FS 20 SIG) */
-#define FTDI_ELV_WS300PC_PID	0xE0F6	/* PC-Wetterstation (WS 300 PC) */
-#define FTDI_ELV_FHZ1300PC_PID	0xE0E8	/* FHZ 1300 PC */
-#define FTDI_ELV_WS500_PID	0xE0E9	/* PC-Wetterstation (WS 500) */
-#define FTDI_ELV_HS485_PID	0xE0EA	/* USB to RS-485 adapter */
-#define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Engery monitor EM 1010 PC */
-#define FTDI_PHI_FISCO_PID      0xE40B  /* PHI Fisco USB to Serial cable */
-
-/*
- * Definitions for ID TECH (www.idt-net.com) devices
- */
-#define IDTECH_VID		0x0ACD	/* ID TECH Vendor ID */
-#define IDTECH_IDT1221U_PID	0x0300	/* IDT1221U USB to RS-232 adapter */
-
-/*
- * Definitions for Omnidirectional Control Technology, Inc. devices
- */
-#define OCT_VID			0x0B39	/* OCT vendor ID */
-/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
-/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
-/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
-#define OCT_US101_PID		0x0421	/* OCT US101 USB to RS-232 */
-
-/* an infrared receiver for user access control with IR tags */
-#define FTDI_PIEGROUP_PID	0xF208	/* Product Id */
-
-/*
- * Definitions for Artemis astronomical USB based cameras
- * Check it at http://www.artemisccd.co.uk/
- */
-#define FTDI_ARTEMIS_PID	0xDF28	/* All Artemis Cameras */
-
-/*
- * Definitions for ATIK Instruments astronomical USB based cameras
- * Check it at http://www.atik-instruments.com/
- */
-#define FTDI_ATIK_ATK16_PID	0xDF30	/* ATIK ATK-16 Grayscale Camera */
-#define FTDI_ATIK_ATK16C_PID	0xDF32	/* ATIK ATK-16C Colour Camera */
-#define FTDI_ATIK_ATK16HR_PID	0xDF31	/* ATIK ATK-16HR Grayscale Camera */
-#define FTDI_ATIK_ATK16HRC_PID	0xDF33	/* ATIK ATK-16HRC Colour Camera */
-#define FTDI_ATIK_ATK16IC_PID   0xDF35  /* ATIK ATK-16IC Grayscale Camera */
-
-/*
- * Protego product ids
- */
-#define PROTEGO_SPECIAL_1	0xFC70	/* special/unknown device */
-#define PROTEGO_R2X0		0xFC71	/* R200-USB TRNG unit (R210, R220, and R230) */
-#define PROTEGO_SPECIAL_3	0xFC72	/* special/unknown device */
-#define PROTEGO_SPECIAL_4	0xFC73	/* special/unknown device */
-
-/*
- * Gude Analog- und Digitalsysteme GmbH
- */
-#define FTDI_GUDEADS_E808_PID    0xE808
-#define FTDI_GUDEADS_E809_PID    0xE809
-#define FTDI_GUDEADS_E80A_PID    0xE80A
-#define FTDI_GUDEADS_E80B_PID    0xE80B
-#define FTDI_GUDEADS_E80C_PID    0xE80C
-#define FTDI_GUDEADS_E80D_PID    0xE80D
-#define FTDI_GUDEADS_E80E_PID    0xE80E
-#define FTDI_GUDEADS_E80F_PID    0xE80F
-#define FTDI_GUDEADS_E888_PID    0xE888  /* Expert ISDN Control USB */
-#define FTDI_GUDEADS_E889_PID    0xE889  /* USB RS-232 OptoBridge */
-#define FTDI_GUDEADS_E88A_PID    0xE88A
-#define FTDI_GUDEADS_E88B_PID    0xE88B
-#define FTDI_GUDEADS_E88C_PID    0xE88C
-#define FTDI_GUDEADS_E88D_PID    0xE88D
-#define FTDI_GUDEADS_E88E_PID    0xE88E
-#define FTDI_GUDEADS_E88F_PID    0xE88F
-
-/*
- * Linx Technologies product ids
- */
-#define LINX_SDMUSBQSS_PID	0xF448	/* Linx SDM-USB-QS-S */
-#define LINX_MASTERDEVEL2_PID   0xF449   /* Linx Master Development 2.0 */
-#define LINX_FUTURE_0_PID   0xF44A   /* Linx future device */
-#define LINX_FUTURE_1_PID   0xF44B   /* Linx future device */
-#define LINX_FUTURE_2_PID   0xF44C   /* Linx future device */
-
-/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */
-/* unit for PIC16's/PIC18's */
-#define FTDI_CCSICDU20_0_PID    0xF9D0
-#define FTDI_CCSICDU40_1_PID    0xF9D1
-#define FTDI_CCSMACHX_2_PID     0xF9D2
-#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
-#define FTDI_CCSICDU64_4_PID    0xF9D4
-#define FTDI_CCSPRIME8_5_PID    0xF9D5
-
-/* Inside Accesso contactless reader (http://www.insidefr.com) */
-#define INSIDE_ACCESSO		0xFAD0
-
-/*
- * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
- */
-#define INTREPID_VID		0x093C
-#define INTREPID_VALUECAN_PID	0x0601
-#define INTREPID_NEOVI_PID	0x0701
-
-/*
- * Falcom Wireless Communications GmbH
- */
-#define FALCOM_VID		0x0F94	/* Vendor Id */
-#define FALCOM_TWIST_PID	0x0001	/* Falcom Twist USB GPRS modem */
-#define FALCOM_SAMBA_PID	0x0005	/* Falcom Samba USB GPRS modem */
-
-/*
- * SUUNTO product ids
- */
-#define FTDI_SUUNTO_SPORTS_PID	0xF680	/* Suunto Sports instrument */
-
-/*
- * Oceanic product ids
- */
-#define FTDI_OCEANIC_PID	0xF460  /* Oceanic dive instrument */
-
-/*
- * TTi (Thurlby Thandar Instruments)
- */
-#define TTI_VID			0x103E	/* Vendor Id */
-#define TTI_QL355P_PID		0x03E8	/* TTi QL355P power supply */
-
-/*
- * Definitions for B&B Electronics products.
- */
-#define BANDB_VID		0x0856	/* B&B Electronics Vendor ID */
-#define BANDB_USOTL4_PID	0xAC01	/* USOTL4 Isolated RS-485 Converter */
-#define BANDB_USTL4_PID		0xAC02	/* USTL4 RS-485 Converter */
-#define BANDB_USO9ML2_PID	0xAC03	/* USO9ML2 Isolated RS-232 Converter */
-#define BANDB_USOPTL4_PID	0xAC11
-#define BANDB_USPTL4_PID	0xAC12
-#define BANDB_USO9ML2DR_2_PID	0xAC16
-#define BANDB_USO9ML2DR_PID	0xAC17
-#define BANDB_USOPTL4DR2_PID	0xAC18	/* USOPTL4R-2 2-port Isolated RS-232 Converter */
-#define BANDB_USOPTL4DR_PID	0xAC19
-#define BANDB_485USB9F_2W_PID	0xAC25
-#define BANDB_485USB9F_4W_PID	0xAC26
-#define BANDB_232USB9M_PID	0xAC27
-#define BANDB_485USBTB_2W_PID	0xAC33
-#define BANDB_485USBTB_4W_PID	0xAC34
-#define BANDB_TTL5USB9M_PID	0xAC49
-#define BANDB_TTL3USB9M_PID	0xAC50
-#define BANDB_ZZ_PROG1_USB_PID	0xBA02
-
-/*
- * RM Michaelides CANview USB (http://www.rmcan.com)
- * CAN fieldbus interface adapter, added by port GmbH www.port.de)
- * Ian Abbott changed the macro names for consistency.
- */
-#define FTDI_RM_CANVIEW_PID	0xfd60	/* Product Id */
-
-/*
- * EVER Eco Pro UPS (http://www.ever.com.pl/)
- */
-
-#define	EVER_ECO_PRO_CDS	0xe520	/* RS-232 converter */
-
-/*
- * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
- * USB-TTY activ, USB-TTY passiv.  Some PIDs are used by several devices
- * and I'm not entirely sure which are used by which.
- */
-#define FTDI_4N_GALAXY_DE_1_PID	0xF3C0
-#define FTDI_4N_GALAXY_DE_2_PID	0xF3C1
-
-/*
- * Mobility Electronics products.
- */
-#define MOBILITY_VID			0x1342
-#define MOBILITY_USB_SERIAL_PID		0x0202	/* EasiDock USB 200 serial */
-
-/*
- * microHAM product IDs (http://www.microham.com).
- * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
- * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
- * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
- */
-#define FTDI_MHAM_KW_PID 0xEEE8		/* USB-KW interface */
-#define FTDI_MHAM_YS_PID 0xEEE9		/* USB-YS interface */
-#define FTDI_MHAM_Y6_PID 0xEEEA		/* USB-Y6 interface */
-#define FTDI_MHAM_Y8_PID 0xEEEB		/* USB-Y8 interface */
-#define FTDI_MHAM_IC_PID 0xEEEC		/* USB-IC interface */
-#define FTDI_MHAM_DB9_PID 0xEEED	/* USB-DB9 interface */
-#define FTDI_MHAM_RS232_PID 0xEEEE	/* USB-RS232 interface */
-#define FTDI_MHAM_Y9_PID 0xEEEF		/* USB-Y9 interface */
-
-/*
- * Active Robots product ids.
- */
-#define FTDI_ACTIVE_ROBOTS_PID	0xE548	/* USB comms board */
-
-/*
- * Xsens Technologies BV products (http://www.xsens.com).
- */
-#define XSENS_CONVERTER_0_PID	0xD388
-#define XSENS_CONVERTER_1_PID	0xD389
-#define XSENS_CONVERTER_2_PID	0xD38A
-#define XSENS_CONVERTER_3_PID	0xD38B
-#define XSENS_CONVERTER_4_PID	0xD38C
-#define XSENS_CONVERTER_5_PID	0xD38D
-#define XSENS_CONVERTER_6_PID	0xD38E
-#define XSENS_CONVERTER_7_PID	0xD38F
-
-/*
- * Teratronik product ids.
- * Submitted by O. Wölfelschneider.
- */
-#define FTDI_TERATRONIK_VCP_PID	 0xEC88	/* Teratronik device (preferring VCP driver on windows) */
-#define FTDI_TERATRONIK_D2XX_PID 0xEC89	/* Teratronik device (preferring D2XX driver on windows) */
-
-/*
- * Evolution Robotics products (http://www.evolution.com/).
- * Submitted by Shawn M. Lavelle.
- */
-#define EVOLUTION_VID		0xDEEE	/* Vendor ID */
-#define EVOLUTION_ER1_PID	0x0300	/* ER1 Control Module */
-#define EVO_8U232AM_PID	0x02FF	/* Evolution robotics RCM2 (FT232AM)*/
-#define EVO_HYBRID_PID		0x0302	/* Evolution robotics RCM4 PID (FT232BM)*/
-#define EVO_RCM4_PID		0x0303	/* Evolution robotics RCM4 PID */
-
-/* Pyramid Computer GmbH */
-#define FTDI_PYRAMID_PID	0xE6C8	/* Pyramid Appliance Display */
-
-/*
- * NDI (www.ndigital.com) product ids
- */
-#define FTDI_NDI_HUC_PID		0xDA70	/* NDI Host USB Converter */
-#define FTDI_NDI_SPECTRA_SCU_PID	0xDA71	/* NDI Spectra SCU */
-#define FTDI_NDI_FUTURE_2_PID		0xDA72	/* NDI future device #2 */
-#define FTDI_NDI_FUTURE_3_PID		0xDA73	/* NDI future device #3 */
-#define FTDI_NDI_AURORA_SCU_PID		0xDA74	/* NDI Aurora SCU */
-
-/*
- * Posiflex inc retail equipment (http://www.posiflex.com.tw)
- */
-#define POSIFLEX_VID		0x0d3a  /* Vendor ID */
-#define POSIFLEX_PP7000_PID	0x0300  /* PP-7000II thermal printer */
-
-/*
- * Westrex International devices submitted by Cory Lee
- */
-#define FTDI_WESTREX_MODEL_777_PID	0xDC00	/* Model 777 */
-#define FTDI_WESTREX_MODEL_8900F_PID	0xDC01	/* Model 8900F */
-
-/*
- * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
- */
-#define FTDI_RRCIRKITS_LOCOBUFFER_PID	0xc7d0	/* LocoBuffer USB */
-
-/*
- * Eclo (http://www.eclo.pt/) product IDs.
- * PID 0xEA90 submitted by Martin Grill.
- */
-#define FTDI_ECLO_COM_1WIRE_PID	0xEA90	/* COM to 1-Wire USB adaptor */
-
-/*
- * Papouch products (http://www.papouch.com/)
- * Submitted by Folkert van Heusden
- */
-
-#define PAPOUCH_VID			0x5050	/* Vendor ID */
-#define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
-#define PAPOUCH_QUIDO4x4_PID		0x0900	/* Quido 4/4 Module */
-
-/*
- * ACG Identification Technologies GmbH products (http://www.acg.de/).
- * Submitted by anton -at- goto10 -dot- org.
  */
-#define FTDI_ACG_HFDUAL_PID		0xDD20	/* HF Dual ISO Reader (RFID) */
-
-/*
- * Yost Engineering, Inc. products (www.yostengineering.com).
- * PID 0xE050 submitted by Aaron Prose.
- */
-#define FTDI_YEI_SERVOCENTER31_PID	0xE050	/* YEI ServoCenter3.1 USB */
-
-/*
- * ThorLabs USB motor drivers
- */
-#define FTDI_THORLABS_PID		0xfaf0 /* ThorLabs USB motor drivers */
-
-/*
- * Testo products (http://www.testo.com/)
- * Submitted by Colin Leroy
- */
-#define TESTO_VID			0x128D
-#define TESTO_USB_INTERFACE_PID		0x0001
-
-/*
- * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
- */
-#define FTDI_GAMMA_SCOUT_PID		0xD678	/* Gamma Scout online */
-
-/*
- * Tactrix OpenPort (ECU) devices.
- * OpenPort 1.3M submitted by Donour Sizemore.
- * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
- */
-#define FTDI_TACTRIX_OPENPORT_13M_PID	0xCC48	/* OpenPort 1.3 Mitsubishi */
-#define FTDI_TACTRIX_OPENPORT_13S_PID	0xCC49	/* OpenPort 1.3 Subaru */
-#define FTDI_TACTRIX_OPENPORT_13U_PID	0xCC4A	/* OpenPort 1.3 Universal */
-
-/*
- * Telldus Technologies
- */
-#define TELLDUS_VID			0x1781	/* Vendor ID */
-#define TELLDUS_TELLSTICK_PID		0x0C30	/* RF control dongle 433 MHz using FT232RL */
-
-/*
- * IBS elektronik product ids
- * Submitted by Thomas Schleusener
- */
-#define FTDI_IBS_US485_PID	0xff38  /* IBS US485 (USB<-->RS422/485 interface) */
-#define FTDI_IBS_PICPRO_PID	0xff39  /* IBS PIC-Programmer */
-#define FTDI_IBS_PCMCIA_PID	0xff3a  /* IBS Card reader for PCMCIA SRAM-cards */
-#define FTDI_IBS_PK1_PID	0xff3b  /* IBS PK1 - Particel counter */
-#define FTDI_IBS_RS232MON_PID	0xff3c  /* IBS RS232 - Monitor */
-#define FTDI_IBS_APP70_PID	0xff3d  /* APP 70 (dust monitoring system) */
-#define FTDI_IBS_PEDO_PID	0xff3e  /* IBS PEDO-Modem (RF modem 868.35 MHz) */
-#define FTDI_IBS_PROD_PID	0xff3f  /* future device */
-
-/*
- *  MaxStream devices	www.maxstream.net
- */
-#define FTDI_MAXSTREAM_PID	0xEE18	/* Xbee PKG-U Module */
-
-/* Olimex */
-#define OLIMEX_VID			0x15BA
-#define OLIMEX_ARM_USB_OCD_PID		0x0003
-
-/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
-/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
-#define LMI_LM3S_DEVEL_BOARD_PID	0xbcd8
-#define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
-
-/* www.elsterelectricity.com Elster Unicom III Optical Probe */
-#define FTDI_ELSTER_UNICOM_PID		0xE700 /* Product Id */
-
-/*
- * The Mobility Lab (TML)
- * Submitted by Pierre Castella
- */
-#define TML_VID			0x1B91	/* Vendor ID */
-#define TML_USB_SERIAL_PID	0x0064	/* USB - Serial Converter */
-
-/* Propox devices */
-#define FTDI_PROPOX_JTAGCABLEII_PID	0xD738
-
-/* Rig Expert Ukraine devices */
-#define FTDI_REU_TINY_PID		0xED22	/* RigExpert Tiny */
-
-/* Domintell products  http://www.domintell.com */
-#define FTDI_DOMINTELL_DGQG_PID	0xEF50	/* Master */
-#define FTDI_DOMINTELL_DUSB_PID	0xEF51	/* DUSB01 module */
-
-/* Alti-2 products  http://www.alti-2.com */
-#define ALTI2_VID	0x1BC9
-#define ALTI2_N3_PID	0x6001	/* Neptune 3 */
 
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
@@ -910,86 +40,6 @@
 #define INTERFACE_C		3
 #define INTERFACE_D		4
 
-/*
- * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
- * Submitted by Harald Welte <laforge@openmoko.org>
- */
-#define	FIC_VID			0x1457
-#define	FIC_NEO1973_DEBUG_PID	0x5118
-
-/*
- * RATOC REX-USB60F
- */
-#define RATOC_VENDOR_ID		0x0584
-#define RATOC_PRODUCT_ID_USB60F	0xb020
-
-/*
- * DIEBOLD BCS SE923
- */
-#define DIEBOLD_BCS_SE923_PID	0xfb99
-
-/*
- * Atmel STK541
- */
-#define ATMEL_VID		0x03eb /* Vendor ID */
-#define STK541_PID		0x2109 /* Zigbee Controller */
-
-/*
- * Dresden Elektronic Sensor Terminal Board
- */
-#define DE_VID			0x1cf1 /* Vendor ID */
-#define STB_PID			0x0001 /* Sensor Terminal Board */
-#define WHT_PID			0x0004 /* Wireless Handheld Terminal */
-
-/*
- * Blackfin gnICE JTAG
- * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
- */
-#define ADI_VID 		0x0456
-#define ADI_GNICE_PID 		0xF000
-#define ADI_GNICEPLUS_PID 	0xF001
-
-/*
- * JETI SPECTROMETER SPECBOS 1201
- * http://www.jeti.com/products/sys/scb/scb1201.php
- */
-#define JETI_VID		0x0c6c
-#define JETI_SPC1201_PID	0x04b2
-
-/*
- * Marvell SheevaPlug
- */
-#define MARVELL_VID		0x9e88
-#define MARVELL_SHEEVAPLUG_PID	0x9e8f
-
-#define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
-
-/*
- * GN Otometrics (http://www.otometrics.com)
- * Submitted by Ville Sundberg.
- */
-#define GN_OTOMETRICS_VID	0x0c33	/* Vendor ID */
-#define AURICAL_USB_PID		0x0010	/* Aurical USB Audiometer */
-
-/*
- * Bayer Ascensia Contour blood glucose meter USB-converter cable.
- * http://winglucofacts.com/cables/
- */
-#define BAYER_VID                      0x1A79
-#define BAYER_CONTOUR_CABLE_PID        0x6001
-
-/*
- * Marvell OpenRD Base, Client
- * http://www.open-rd.org
- * OpenRD Base, Client use VID 0x0403
- */
-#define MARVELL_OPENRD_PID	0x9e90
-
-/*
- * Hameg HO820 and HO870 interface (using VID 0x0403)
- */
-#define        HAMEG_HO820_PID         0xed74
-#define        HAMEG_HO870_PID         0xed71
 
 /*
  *   BmRequestType:  1100 0000b
@@ -1504,4 +554,3 @@ typedef enum {
  * B2..7	Length of message - (not including Byte 0)
  *
  */
-
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
new file mode 100644
index 000000000000..da92b4952ffb
--- /dev/null
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -0,0 +1,986 @@
+/*
+ * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters.
+ * Please keep numerically sorted within individual areas, thanks!
+ *
+ * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
+ * from Rudolf Gugler
+ *
+ */
+
+
+/**********************************/
+/***** devices using FTDI VID *****/
+/**********************************/
+
+
+#define FTDI_VID	0x0403	/* Vendor Id */
+
+
+/*** "original" FTDI device PIDs ***/
+
+#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
+#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
+#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
+#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
+#define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX  */
+#define FTDI_232RL_PID  0xFBFA  /* Product ID for FT232RL */
+
+
+/*** third-party PIDs (using FTDI_VID) ***/
+
+/*
+ * Marvell OpenRD Base, Client
+ * http://www.open-rd.org
+ * OpenRD Base, Client use VID 0x0403
+ */
+#define MARVELL_OPENRD_PID	0x9e90
+
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
+/* OOCDlink by Joern Kaipf <joernk@web.de>
+ * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
+#define FTDI_OOCDLINK_PID	0xbaf8	/* Amontec JTAGkey */
+
+/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
+/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
+#define LMI_LM3S_DEVEL_BOARD_PID	0xbcd8
+#define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
+
+#define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
+
+/* OpenDCC (www.opendcc.de) product id */
+#define FTDI_OPENDCC_PID	0xBFD8
+#define FTDI_OPENDCC_SNIFFER_PID	0xBFD9
+#define FTDI_OPENDCC_THROTTLE_PID	0xBFDA
+#define FTDI_OPENDCC_GATEWAY_PID	0xBFDB
+
+/*
+ * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
+ */
+#define FTDI_RRCIRKITS_LOCOBUFFER_PID	0xc7d0	/* LocoBuffer USB */
+
+/* DMX4ALL DMX Interfaces */
+#define FTDI_DMX4ALL 0xC850
+
+/*
+ * ASK.fr devices
+ */
+#define FTDI_ASK_RDR400_PID	0xC991	/* ASK RDR 400 series card reader */
+
+/* www.starting-point-systems.com µChameleon device */
+#define FTDI_MICRO_CHAMELEON_PID	0xCAA0	/* Product Id */
+
+/*
+ * Tactrix OpenPort (ECU) devices.
+ * OpenPort 1.3M submitted by Donour Sizemore.
+ * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
+ */
+#define FTDI_TACTRIX_OPENPORT_13M_PID	0xCC48	/* OpenPort 1.3 Mitsubishi */
+#define FTDI_TACTRIX_OPENPORT_13S_PID	0xCC49	/* OpenPort 1.3 Subaru */
+#define FTDI_TACTRIX_OPENPORT_13U_PID	0xCC4A	/* OpenPort 1.3 Universal */
+
+/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
+/* the VID is the standard ftdi vid (FTDI_VID) */
+#define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
+#define FTDI_SCS_DEVICE_1_PID 0xD011    /* SCS Tracker / DSP TNC */
+#define FTDI_SCS_DEVICE_2_PID 0xD012
+#define FTDI_SCS_DEVICE_3_PID 0xD013
+#define FTDI_SCS_DEVICE_4_PID 0xD014
+#define FTDI_SCS_DEVICE_5_PID 0xD015
+#define FTDI_SCS_DEVICE_6_PID 0xD016
+#define FTDI_SCS_DEVICE_7_PID 0xD017
+
+/* iPlus device */
+#define FTDI_IPLUS_PID 0xD070 /* Product Id */
+#define FTDI_IPLUS2_PID 0xD071 /* Product Id */
+
+/*
+ * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
+ */
+#define FTDI_GAMMA_SCOUT_PID		0xD678	/* Gamma Scout online */
+
+/* Propox devices */
+#define FTDI_PROPOX_JTAGCABLEII_PID	0xD738
+
+/*
+ * Xsens Technologies BV products (http://www.xsens.com).
+ */
+#define XSENS_CONVERTER_0_PID	0xD388
+#define XSENS_CONVERTER_1_PID	0xD389
+#define XSENS_CONVERTER_2_PID	0xD38A
+#define XSENS_CONVERTER_3_PID	0xD38B
+#define XSENS_CONVERTER_4_PID	0xD38C
+#define XSENS_CONVERTER_5_PID	0xD38D
+#define XSENS_CONVERTER_6_PID	0xD38E
+#define XSENS_CONVERTER_7_PID	0xD38F
+
+/*
+ * NDI (www.ndigital.com) product ids
+ */
+#define FTDI_NDI_HUC_PID		0xDA70	/* NDI Host USB Converter */
+#define FTDI_NDI_SPECTRA_SCU_PID	0xDA71	/* NDI Spectra SCU */
+#define FTDI_NDI_FUTURE_2_PID		0xDA72	/* NDI future device #2 */
+#define FTDI_NDI_FUTURE_3_PID		0xDA73	/* NDI future device #3 */
+#define FTDI_NDI_AURORA_SCU_PID		0xDA74	/* NDI Aurora SCU */
+
+/*
+ * Westrex International devices submitted by Cory Lee
+ */
+#define FTDI_WESTREX_MODEL_777_PID	0xDC00	/* Model 777 */
+#define FTDI_WESTREX_MODEL_8900F_PID	0xDC01	/* Model 8900F */
+
+/*
+ * ACG Identification Technologies GmbH products (http://www.acg.de/).
+ * Submitted by anton -at- goto10 -dot- org.
+ */
+#define FTDI_ACG_HFDUAL_PID		0xDD20	/* HF Dual ISO Reader (RFID) */
+
+/*
+ * Definitions for Artemis astronomical USB based cameras
+ * Check it at http://www.artemisccd.co.uk/
+ */
+#define FTDI_ARTEMIS_PID	0xDF28	/* All Artemis Cameras */
+
+/*
+ * Definitions for ATIK Instruments astronomical USB based cameras
+ * Check it at http://www.atik-instruments.com/
+ */
+#define FTDI_ATIK_ATK16_PID	0xDF30	/* ATIK ATK-16 Grayscale Camera */
+#define FTDI_ATIK_ATK16C_PID	0xDF32	/* ATIK ATK-16C Colour Camera */
+#define FTDI_ATIK_ATK16HR_PID	0xDF31	/* ATIK ATK-16HR Grayscale Camera */
+#define FTDI_ATIK_ATK16HRC_PID	0xDF33	/* ATIK ATK-16HRC Colour Camera */
+#define FTDI_ATIK_ATK16IC_PID   0xDF35  /* ATIK ATK-16IC Grayscale Camera */
+
+/*
+ * Yost Engineering, Inc. products (www.yostengineering.com).
+ * PID 0xE050 submitted by Aaron Prose.
+ */
+#define FTDI_YEI_SERVOCENTER31_PID	0xE050	/* YEI ServoCenter3.1 USB */
+
+/*
+ * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
+ * All of these devices use FTDI's vendor ID (0x0403).
+ *
+ * The previously included PID for the UO 100 module was incorrect.
+ * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
+ *
+ * Armin Laeuger originally sent the PID for the UM 100 module.
+ */
+#define FTDI_ELV_FHZ1300PC_PID	0xE0E8	/* FHZ 1300 PC */
+#define FTDI_ELV_WS500_PID	0xE0E9	/* PC-Wetterstation (WS 500) */
+#define FTDI_ELV_HS485_PID	0xE0EA	/* USB to RS-485 adapter */
+#define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Engery monitor EM 1010 PC */
+#define FTDI_ELV_CSI8_PID	0xE0F0	/* Computer-Schalt-Interface (CSI 8) */
+#define FTDI_ELV_EM1000DL_PID	0xE0F1	/* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
+#define FTDI_ELV_PCK100_PID	0xE0F2	/* PC-Kabeltester (PCK 100) */
+#define FTDI_ELV_RFP500_PID	0xE0F3	/* HF-Leistungsmesser (RFP 500) */
+#define FTDI_ELV_FS20SIG_PID	0xE0F4	/* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_WS300PC_PID	0xE0F6	/* PC-Wetterstation (WS 300 PC) */
+#define FTDI_PHI_FISCO_PID      0xE40B  /* PHI Fisco USB to Serial cable */
+#define FTDI_ELV_UAD8_PID	0xF068	/* USB-AD-Wandler (UAD 8) */
+#define FTDI_ELV_UDA7_PID	0xF069	/* USB-DA-Wandler (UDA 7) */
+#define FTDI_ELV_USI2_PID	0xF06A	/* USB-Schrittmotoren-Interface (USI 2) */
+#define FTDI_ELV_T1100_PID	0xF06B	/* Thermometer (T 1100) */
+#define FTDI_ELV_PCD200_PID	0xF06C	/* PC-Datenlogger (PCD 200) */
+#define FTDI_ELV_ULA200_PID	0xF06D	/* USB-LCD-Ansteuerung (ULA 200) */
+#define FTDI_ELV_ALC8500_PID	0xF06E	/* ALC 8500 Expert */
+#define FTDI_ELV_FHZ1000PC_PID	0xF06F	/* FHZ 1000 PC */
+#define FTDI_ELV_UR100_PID	0xFB58	/* USB-RS232-Umsetzer (UR 100) */
+#define FTDI_ELV_UM100_PID	0xFB5A	/* USB-Modul UM 100 */
+#define FTDI_ELV_UO100_PID	0xFB5B	/* USB-Modul UO 100 */
+/* Additional ELV PIDs that default to using the FTDI D2XX drivers on
+ * MS Windows, rather than the FTDI Virtual Com Port drivers.
+ * Maybe these will be easier to use with the libftdi/libusb user-space
+ * drivers, or possibly the Comedi drivers in some cases. */
+#define FTDI_ELV_CLI7000_PID	0xFB59	/* Computer-Light-Interface (CLI 7000) */
+#define FTDI_ELV_PPS7330_PID	0xFB5C	/* Processor-Power-Supply (PPS 7330) */
+#define FTDI_ELV_TFM100_PID	0xFB5D	/* Temperartur-Feuchte Messgeraet (TFM 100) */
+#define FTDI_ELV_UDF77_PID	0xFB5E	/* USB DCF Funkurh (UDF 77) */
+#define FTDI_ELV_UIO88_PID	0xFB5F	/* USB-I/O Interface (UIO 88) */
+
+/*
+ * EVER Eco Pro UPS (http://www.ever.com.pl/)
+ */
+
+#define	EVER_ECO_PRO_CDS	0xe520	/* RS-232 converter */
+
+/*
+ * Active Robots product ids.
+ */
+#define FTDI_ACTIVE_ROBOTS_PID	0xE548	/* USB comms board */
+
+/* Pyramid Computer GmbH */
+#define FTDI_PYRAMID_PID	0xE6C8	/* Pyramid Appliance Display */
+
+/* www.elsterelectricity.com Elster Unicom III Optical Probe */
+#define FTDI_ELSTER_UNICOM_PID		0xE700 /* Product Id */
+
+/*
+ * Gude Analog- und Digitalsysteme GmbH
+ */
+#define FTDI_GUDEADS_E808_PID    0xE808
+#define FTDI_GUDEADS_E809_PID    0xE809
+#define FTDI_GUDEADS_E80A_PID    0xE80A
+#define FTDI_GUDEADS_E80B_PID    0xE80B
+#define FTDI_GUDEADS_E80C_PID    0xE80C
+#define FTDI_GUDEADS_E80D_PID    0xE80D
+#define FTDI_GUDEADS_E80E_PID    0xE80E
+#define FTDI_GUDEADS_E80F_PID    0xE80F
+#define FTDI_GUDEADS_E888_PID    0xE888  /* Expert ISDN Control USB */
+#define FTDI_GUDEADS_E889_PID    0xE889  /* USB RS-232 OptoBridge */
+#define FTDI_GUDEADS_E88A_PID    0xE88A
+#define FTDI_GUDEADS_E88B_PID    0xE88B
+#define FTDI_GUDEADS_E88C_PID    0xE88C
+#define FTDI_GUDEADS_E88D_PID    0xE88D
+#define FTDI_GUDEADS_E88E_PID    0xE88E
+#define FTDI_GUDEADS_E88F_PID    0xE88F
+
+/*
+ * Eclo (http://www.eclo.pt/) product IDs.
+ * PID 0xEA90 submitted by Martin Grill.
+ */
+#define FTDI_ECLO_COM_1WIRE_PID	0xEA90	/* COM to 1-Wire USB adaptor */
+
+/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
+#define FTDI_TNC_X_PID		0xEBE0
+
+/*
+ * Teratronik product ids.
+ * Submitted by O. Wölfelschneider.
+ */
+#define FTDI_TERATRONIK_VCP_PID	 0xEC88	/* Teratronik device (preferring VCP driver on windows) */
+#define FTDI_TERATRONIK_D2XX_PID 0xEC89	/* Teratronik device (preferring D2XX driver on windows) */
+
+/* Rig Expert Ukraine devices */
+#define FTDI_REU_TINY_PID		0xED22	/* RigExpert Tiny */
+
+/*
+ * Hameg HO820 and HO870 interface (using VID 0x0403)
+ */
+#define        HAMEG_HO820_PID         0xed74
+#define        HAMEG_HO870_PID         0xed71
+
+/*
+ *  MaxStream devices	www.maxstream.net
+ */
+#define FTDI_MAXSTREAM_PID	0xEE18	/* Xbee PKG-U Module */
+
+/*
+ * microHAM product IDs (http://www.microham.com).
+ * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
+ * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
+ * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
+ */
+#define FTDI_MHAM_KW_PID 0xEEE8		/* USB-KW interface */
+#define FTDI_MHAM_YS_PID 0xEEE9		/* USB-YS interface */
+#define FTDI_MHAM_Y6_PID 0xEEEA		/* USB-Y6 interface */
+#define FTDI_MHAM_Y8_PID 0xEEEB		/* USB-Y8 interface */
+#define FTDI_MHAM_IC_PID 0xEEEC		/* USB-IC interface */
+#define FTDI_MHAM_DB9_PID 0xEEED	/* USB-DB9 interface */
+#define FTDI_MHAM_RS232_PID 0xEEEE	/* USB-RS232 interface */
+#define FTDI_MHAM_Y9_PID 0xEEEF		/* USB-Y9 interface */
+
+/* Domintell products  http://www.domintell.com */
+#define FTDI_DOMINTELL_DGQG_PID	0xEF50	/* Master */
+#define FTDI_DOMINTELL_DUSB_PID	0xEF51	/* DUSB01 module */
+
+/*
+ * The following are the values for the Perle Systems
+ * UltraPort USB serial converters
+ */
+#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0	/* Perle UltraPort Product Id */
+
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II		0xF0C8
+
+/* an infrared receiver for user access control with IR tags */
+#define FTDI_PIEGROUP_PID	0xF208	/* Product Id */
+
+/* ACT Solutions HomePro ZWave interface
+   (http://www.act-solutions.com/HomePro.htm) */
+#define FTDI_ACTZWAVE_PID	0xF2D0
+
+/*
+ * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
+ * USB-TTY activ, USB-TTY passiv.  Some PIDs are used by several devices
+ * and I'm not entirely sure which are used by which.
+ */
+#define FTDI_4N_GALAXY_DE_1_PID	0xF3C0
+#define FTDI_4N_GALAXY_DE_2_PID	0xF3C1
+
+/*
+ * Linx Technologies product ids
+ */
+#define LINX_SDMUSBQSS_PID	0xF448	/* Linx SDM-USB-QS-S */
+#define LINX_MASTERDEVEL2_PID   0xF449   /* Linx Master Development 2.0 */
+#define LINX_FUTURE_0_PID   0xF44A   /* Linx future device */
+#define LINX_FUTURE_1_PID   0xF44B   /* Linx future device */
+#define LINX_FUTURE_2_PID   0xF44C   /* Linx future device */
+
+/*
+ * Oceanic product ids
+ */
+#define FTDI_OCEANIC_PID	0xF460  /* Oceanic dive instrument */
+
+/*
+ * SUUNTO product ids
+ */
+#define FTDI_SUUNTO_SPORTS_PID	0xF680	/* Suunto Sports instrument */
+
+/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
+/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
+#define FTDI_USB_UIRT_PID	0xF850	/* Product Id */
+
+/* CCS Inc. ICDU/ICDU40 product ID -
+ * the FT232BM is used in an in-circuit-debugger unit for PIC16's/PIC18's */
+#define FTDI_CCSICDU20_0_PID    0xF9D0
+#define FTDI_CCSICDU40_1_PID    0xF9D1
+#define FTDI_CCSMACHX_2_PID     0xF9D2
+#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
+#define FTDI_CCSICDU64_4_PID    0xF9D4
+#define FTDI_CCSPRIME8_5_PID    0xF9D5
+
+/*
+ * The following are the values for the Matrix Orbital LCD displays,
+ * which are the FT232BM ( similar to the 8U232AM )
+ */
+#define FTDI_MTXORB_0_PID      0xFA00  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_1_PID      0xFA01  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_2_PID      0xFA02  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_3_PID      0xFA03  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_4_PID      0xFA04  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_5_PID      0xFA05  /* Matrix Orbital Product Id */
+#define FTDI_MTXORB_6_PID      0xFA06  /* Matrix Orbital Product Id */
+
+/*
+ * Home Electronics (www.home-electro.com) USB gadgets
+ */
+#define FTDI_HE_TIRA1_PID	0xFA78	/* Tira-1 IR transceiver */
+
+/* Inside Accesso contactless reader (http://www.insidefr.com) */
+#define INSIDE_ACCESSO		0xFAD0
+
+/*
+ * ThorLabs USB motor drivers
+ */
+#define FTDI_THORLABS_PID		0xfaf0 /* ThorLabs USB motor drivers */
+
+/*
+ * Protego product ids
+ */
+#define PROTEGO_SPECIAL_1	0xFC70	/* special/unknown device */
+#define PROTEGO_R2X0		0xFC71	/* R200-USB TRNG unit (R210, R220, and R230) */
+#define PROTEGO_SPECIAL_3	0xFC72	/* special/unknown device */
+#define PROTEGO_SPECIAL_4	0xFC73	/* special/unknown device */
+
+/*
+ * DSS-20 Sync Station for Sony Ericsson P800
+ */
+#define FTDI_DSS20_PID          0xFC82
+
+/* www.irtrans.de device */
+#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
+
+/*
+ * RM Michaelides CANview USB (http://www.rmcan.com) (FTDI_VID)
+ * CAN fieldbus interface adapter, added by port GmbH www.port.de)
+ * Ian Abbott changed the macro names for consistency.
+ */
+#define FTDI_RM_CANVIEW_PID	0xfd60	/* Product Id */
+/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
+#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
+
+#define FTDI_USBX_707_PID 0xF857	/* ADSTech IR Blaster USBX-707 (FTDI_VID) */
+
+#define FTDI_RELAIS_PID	0xFA10  /* Relais device from Rudolf Gugler */
+
+/*
+ * PCDJ use ftdi based dj-controllers. The following PID is
+ * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp
+ * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen)
+ */
+#define FTDI_PCDJ_DAC2_PID 0xFA88
+
+#define FTDI_R2000KU_TRUE_RNG	0xFB80  /* R2000KU TRUE RNG (FTDI_VID) */
+
+/*
+ * DIEBOLD BCS SE923 (FTDI_VID)
+ */
+#define DIEBOLD_BCS_SE923_PID	0xfb99
+
+/* www.crystalfontz.com devices
+ * - thanx for providing free devices for evaluation !
+ * they use the ftdi chipset for the USB interface
+ * and the vendor id is the same
+ */
+#define FTDI_XF_632_PID 0xFC08	/* 632: 16x2 Character Display */
+#define FTDI_XF_634_PID 0xFC09	/* 634: 20x4 Character Display */
+#define FTDI_XF_547_PID 0xFC0A	/* 547: Two line Display */
+#define FTDI_XF_633_PID 0xFC0B	/* 633: 16x2 Character Display with Keys */
+#define FTDI_XF_631_PID 0xFC0C	/* 631: 20x2 Character Display */
+#define FTDI_XF_635_PID 0xFC0D	/* 635: 20x4 Character Display */
+#define FTDI_XF_640_PID 0xFC0E	/* 640: Two line Display */
+#define FTDI_XF_642_PID 0xFC0F	/* 642: Two line Display */
+
+/*
+ * Video Networks Limited / Homechoice in the UK use an ftdi-based device
+ * for their 1Mb broadband internet service.  The following PID is exhibited
+ * by the usb device supplied (the VID is the standard ftdi vid (FTDI_VID)
+ */
+#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
+
+/* AlphaMicro Components AMC-232USB01 device (FTDI_VID) */
+#define FTDI_AMC232_PID 0xFF00 /* Product Id */
+
+/*
+ * IBS elektronik product ids (FTDI_VID)
+ * Submitted by Thomas Schleusener
+ */
+#define FTDI_IBS_US485_PID	0xff38  /* IBS US485 (USB<-->RS422/485 interface) */
+#define FTDI_IBS_PICPRO_PID	0xff39  /* IBS PIC-Programmer */
+#define FTDI_IBS_PCMCIA_PID	0xff3a  /* IBS Card reader for PCMCIA SRAM-cards */
+#define FTDI_IBS_PK1_PID	0xff3b  /* IBS PK1 - Particel counter */
+#define FTDI_IBS_RS232MON_PID	0xff3c  /* IBS RS232 - Monitor */
+#define FTDI_IBS_APP70_PID	0xff3d  /* APP 70 (dust monitoring system) */
+#define FTDI_IBS_PEDO_PID	0xff3e  /* IBS PEDO-Modem (RF modem 868.35 MHz) */
+#define FTDI_IBS_PROD_PID	0xff3f  /* future device */
+/* www.canusb.com Lawicel CANUSB device (FTDI_VID) */
+#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
+
+
+
+/********************************/
+/** third-party VID/PID combos **/
+/********************************/
+
+
+
+/*
+ * Atmel STK541
+ */
+#define ATMEL_VID		0x03eb /* Vendor ID */
+#define STK541_PID		0x2109 /* Zigbee Controller */
+
+/*
+ * Blackfin gnICE JTAG
+ * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
+ */
+#define ADI_VID 		0x0456
+#define ADI_GNICE_PID 		0xF000
+#define ADI_GNICEPLUS_PID 	0xF001
+
+/*
+ * RATOC REX-USB60F
+ */
+#define RATOC_VENDOR_ID		0x0584
+#define RATOC_PRODUCT_ID_USB60F	0xb020
+
+/*
+ * Definitions for B&B Electronics products.
+ */
+#define BANDB_VID		0x0856	/* B&B Electronics Vendor ID */
+#define BANDB_USOTL4_PID	0xAC01	/* USOTL4 Isolated RS-485 Converter */
+#define BANDB_USTL4_PID		0xAC02	/* USTL4 RS-485 Converter */
+#define BANDB_USO9ML2_PID	0xAC03	/* USO9ML2 Isolated RS-232 Converter */
+#define BANDB_USOPTL4_PID	0xAC11
+#define BANDB_USPTL4_PID	0xAC12
+#define BANDB_USO9ML2DR_2_PID	0xAC16
+#define BANDB_USO9ML2DR_PID	0xAC17
+#define BANDB_USOPTL4DR2_PID	0xAC18	/* USOPTL4R-2 2-port Isolated RS-232 Converter */
+#define BANDB_USOPTL4DR_PID	0xAC19
+#define BANDB_485USB9F_2W_PID	0xAC25
+#define BANDB_485USB9F_4W_PID	0xAC26
+#define BANDB_232USB9M_PID	0xAC27
+#define BANDB_485USBTB_2W_PID	0xAC33
+#define BANDB_485USBTB_4W_PID	0xAC34
+#define BANDB_TTL5USB9M_PID	0xAC49
+#define BANDB_TTL3USB9M_PID	0xAC50
+#define BANDB_ZZ_PROG1_USB_PID	0xBA02
+
+/*
+ * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
+ */
+#define INTREPID_VID		0x093C
+#define INTREPID_VALUECAN_PID	0x0601
+#define INTREPID_NEOVI_PID	0x0701
+
+/*
+ * Definitions for ID TECH (www.idt-net.com) devices
+ */
+#define IDTECH_VID		0x0ACD	/* ID TECH Vendor ID */
+#define IDTECH_IDT1221U_PID	0x0300	/* IDT1221U USB to RS-232 adapter */
+
+/*
+ * Definitions for Omnidirectional Control Technology, Inc. devices
+ */
+#define OCT_VID			0x0B39	/* OCT vendor ID */
+/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
+/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
+/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
+#define OCT_US101_PID		0x0421	/* OCT US101 USB to RS-232 */
+
+/*
+ * Icom ID-1 digital transceiver
+ */
+
+#define ICOM_ID1_VID            0x0C26
+#define ICOM_ID1_PID            0x0004
+
+/*
+ * GN Otometrics (http://www.otometrics.com)
+ * Submitted by Ville Sundberg.
+ */
+#define GN_OTOMETRICS_VID	0x0c33	/* Vendor ID */
+#define AURICAL_USB_PID		0x0010	/* Aurical USB Audiometer */
+
+/*
+ * The following are the values for the Sealevel SeaLINK+ adapters.
+ * (Original list sent by Tuan Hoang.  Ian Abbott renamed the macros and
+ * removed some PIDs that don't seem to match any existing products.)
+ */
+#define SEALEVEL_VID		0x0c52	/* Sealevel Vendor ID */
+#define SEALEVEL_2101_PID	0x2101	/* SeaLINK+232 (2101/2105) */
+#define SEALEVEL_2102_PID	0x2102	/* SeaLINK+485 (2102) */
+#define SEALEVEL_2103_PID	0x2103	/* SeaLINK+232I (2103) */
+#define SEALEVEL_2104_PID	0x2104	/* SeaLINK+485I (2104) */
+#define SEALEVEL_2106_PID	0x9020	/* SeaLINK+422 (2106) */
+#define SEALEVEL_2201_1_PID	0x2211	/* SeaPORT+2/232 (2201) Port 1 */
+#define SEALEVEL_2201_2_PID	0x2221	/* SeaPORT+2/232 (2201) Port 2 */
+#define SEALEVEL_2202_1_PID	0x2212	/* SeaPORT+2/485 (2202) Port 1 */
+#define SEALEVEL_2202_2_PID	0x2222	/* SeaPORT+2/485 (2202) Port 2 */
+#define SEALEVEL_2203_1_PID	0x2213	/* SeaPORT+2 (2203) Port 1 */
+#define SEALEVEL_2203_2_PID	0x2223	/* SeaPORT+2 (2203) Port 2 */
+#define SEALEVEL_2401_1_PID	0x2411	/* SeaPORT+4/232 (2401) Port 1 */
+#define SEALEVEL_2401_2_PID	0x2421	/* SeaPORT+4/232 (2401) Port 2 */
+#define SEALEVEL_2401_3_PID	0x2431	/* SeaPORT+4/232 (2401) Port 3 */
+#define SEALEVEL_2401_4_PID	0x2441	/* SeaPORT+4/232 (2401) Port 4 */
+#define SEALEVEL_2402_1_PID	0x2412	/* SeaPORT+4/485 (2402) Port 1 */
+#define SEALEVEL_2402_2_PID	0x2422	/* SeaPORT+4/485 (2402) Port 2 */
+#define SEALEVEL_2402_3_PID	0x2432	/* SeaPORT+4/485 (2402) Port 3 */
+#define SEALEVEL_2402_4_PID	0x2442	/* SeaPORT+4/485 (2402) Port 4 */
+#define SEALEVEL_2403_1_PID	0x2413	/* SeaPORT+4 (2403) Port 1 */
+#define SEALEVEL_2403_2_PID	0x2423	/* SeaPORT+4 (2403) Port 2 */
+#define SEALEVEL_2403_3_PID	0x2433	/* SeaPORT+4 (2403) Port 3 */
+#define SEALEVEL_2403_4_PID	0x2443	/* SeaPORT+4 (2403) Port 4 */
+#define SEALEVEL_2801_1_PID	0X2811	/* SeaLINK+8/232 (2801) Port 1 */
+#define SEALEVEL_2801_2_PID	0X2821	/* SeaLINK+8/232 (2801) Port 2 */
+#define SEALEVEL_2801_3_PID	0X2831	/* SeaLINK+8/232 (2801) Port 3 */
+#define SEALEVEL_2801_4_PID	0X2841	/* SeaLINK+8/232 (2801) Port 4 */
+#define SEALEVEL_2801_5_PID	0X2851	/* SeaLINK+8/232 (2801) Port 5 */
+#define SEALEVEL_2801_6_PID	0X2861	/* SeaLINK+8/232 (2801) Port 6 */
+#define SEALEVEL_2801_7_PID	0X2871	/* SeaLINK+8/232 (2801) Port 7 */
+#define SEALEVEL_2801_8_PID	0X2881	/* SeaLINK+8/232 (2801) Port 8 */
+#define SEALEVEL_2802_1_PID	0X2812	/* SeaLINK+8/485 (2802) Port 1 */
+#define SEALEVEL_2802_2_PID	0X2822	/* SeaLINK+8/485 (2802) Port 2 */
+#define SEALEVEL_2802_3_PID	0X2832	/* SeaLINK+8/485 (2802) Port 3 */
+#define SEALEVEL_2802_4_PID	0X2842	/* SeaLINK+8/485 (2802) Port 4 */
+#define SEALEVEL_2802_5_PID	0X2852	/* SeaLINK+8/485 (2802) Port 5 */
+#define SEALEVEL_2802_6_PID	0X2862	/* SeaLINK+8/485 (2802) Port 6 */
+#define SEALEVEL_2802_7_PID	0X2872	/* SeaLINK+8/485 (2802) Port 7 */
+#define SEALEVEL_2802_8_PID	0X2882	/* SeaLINK+8/485 (2802) Port 8 */
+#define SEALEVEL_2803_1_PID	0X2813	/* SeaLINK+8 (2803) Port 1 */
+#define SEALEVEL_2803_2_PID	0X2823 	/* SeaLINK+8 (2803) Port 2 */
+#define SEALEVEL_2803_3_PID	0X2833 	/* SeaLINK+8 (2803) Port 3 */
+#define SEALEVEL_2803_4_PID	0X2843 	/* SeaLINK+8 (2803) Port 4 */
+#define SEALEVEL_2803_5_PID	0X2853 	/* SeaLINK+8 (2803) Port 5 */
+#define SEALEVEL_2803_6_PID	0X2863 	/* SeaLINK+8 (2803) Port 6 */
+#define SEALEVEL_2803_7_PID	0X2873 	/* SeaLINK+8 (2803) Port 7 */
+#define SEALEVEL_2803_8_PID	0X2883 	/* SeaLINK+8 (2803) Port 8 */
+
+/*
+ * JETI SPECTROMETER SPECBOS 1201
+ * http://www.jeti.com/products/sys/scb/scb1201.php
+ */
+#define JETI_VID		0x0c6c
+#define JETI_SPC1201_PID	0x04b2
+
+/*
+ * FTDI USB UART chips used in construction projects from the
+ * Elektor Electronics magazine (http://elektor-electronics.co.uk)
+ */
+#define ELEKTOR_VID		0x0C7D
+#define ELEKTOR_FT323R_PID	0x0005	/* RFID-Reader, issue 09-2006 */
+
+/*
+ * Posiflex inc retail equipment (http://www.posiflex.com.tw)
+ */
+#define POSIFLEX_VID		0x0d3a  /* Vendor ID */
+#define POSIFLEX_PP7000_PID	0x0300  /* PP-7000II thermal printer */
+
+/*
+ * The following are the values for two KOBIL chipcard terminals.
+ */
+#define KOBIL_VID		0x0d46	/* KOBIL Vendor ID */
+#define KOBIL_CONV_B1_PID	0x2020	/* KOBIL Konverter for B1 */
+#define KOBIL_CONV_KAAN_PID	0x2021	/* KOBIL_Konverter for KAAN */
+
+#define FTDI_NF_RIC_VID	0x0DCD	/* Vendor Id */
+#define FTDI_NF_RIC_PID	0x0001	/* Product Id */
+
+/*
+ * Falcom Wireless Communications GmbH
+ */
+#define FALCOM_VID		0x0F94	/* Vendor Id */
+#define FALCOM_TWIST_PID	0x0001	/* Falcom Twist USB GPRS modem */
+#define FALCOM_SAMBA_PID	0x0005	/* Falcom Samba USB GPRS modem */
+
+/* Larsen and Brusgaard AltiTrack/USBtrack  */
+#define LARSENBRUSGAARD_VID		0x0FD8
+#define LB_ALTITRACK_PID		0x0001
+
+/*
+ * TTi (Thurlby Thandar Instruments)
+ */
+#define TTI_VID			0x103E	/* Vendor Id */
+#define TTI_QL355P_PID		0x03E8	/* TTi QL355P power supply */
+
+/* Interbiometrics USB I/O Board */
+/* Developed for Interbiometrics by Rudolf Gugler */
+#define INTERBIOMETRICS_VID              0x1209
+#define INTERBIOMETRICS_IOBOARD_PID      0x1002
+#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
+
+/*
+ * Testo products (http://www.testo.com/)
+ * Submitted by Colin Leroy
+ */
+#define TESTO_VID			0x128D
+#define TESTO_USB_INTERFACE_PID		0x0001
+
+/*
+ * Mobility Electronics products.
+ */
+#define MOBILITY_VID			0x1342
+#define MOBILITY_USB_SERIAL_PID		0x0202	/* EasiDock USB 200 serial */
+
+/*
+ * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
+ * Submitted by Harald Welte <laforge@openmoko.org>
+ */
+#define	FIC_VID			0x1457
+#define	FIC_NEO1973_DEBUG_PID	0x5118
+
+/* Olimex */
+#define OLIMEX_VID			0x15BA
+#define OLIMEX_ARM_USB_OCD_PID		0x0003
+
+/*
+ * Telldus Technologies
+ */
+#define TELLDUS_VID			0x1781	/* Vendor ID */
+#define TELLDUS_TELLSTICK_PID		0x0C30	/* RF control dongle 433 MHz using FT232RL */
+
+/*
+ * Bayer Ascensia Contour blood glucose meter USB-converter cable.
+ * http://winglucofacts.com/cables/
+ */
+#define BAYER_VID                      0x1A79
+#define BAYER_CONTOUR_CABLE_PID        0x6001
+
+/*
+ * The following are the values for the Matrix Orbital FTDI Range
+ * Anything in this range will use an FT232RL.
+ */
+#define MTXORB_VID			0x1B3D
+#define MTXORB_FTDI_RANGE_0100_PID	0x0100
+#define MTXORB_FTDI_RANGE_0101_PID	0x0101
+#define MTXORB_FTDI_RANGE_0102_PID	0x0102
+#define MTXORB_FTDI_RANGE_0103_PID	0x0103
+#define MTXORB_FTDI_RANGE_0104_PID	0x0104
+#define MTXORB_FTDI_RANGE_0105_PID	0x0105
+#define MTXORB_FTDI_RANGE_0106_PID	0x0106
+#define MTXORB_FTDI_RANGE_0107_PID	0x0107
+#define MTXORB_FTDI_RANGE_0108_PID	0x0108
+#define MTXORB_FTDI_RANGE_0109_PID	0x0109
+#define MTXORB_FTDI_RANGE_010A_PID	0x010A
+#define MTXORB_FTDI_RANGE_010B_PID	0x010B
+#define MTXORB_FTDI_RANGE_010C_PID	0x010C
+#define MTXORB_FTDI_RANGE_010D_PID	0x010D
+#define MTXORB_FTDI_RANGE_010E_PID	0x010E
+#define MTXORB_FTDI_RANGE_010F_PID	0x010F
+#define MTXORB_FTDI_RANGE_0110_PID	0x0110
+#define MTXORB_FTDI_RANGE_0111_PID	0x0111
+#define MTXORB_FTDI_RANGE_0112_PID	0x0112
+#define MTXORB_FTDI_RANGE_0113_PID	0x0113
+#define MTXORB_FTDI_RANGE_0114_PID	0x0114
+#define MTXORB_FTDI_RANGE_0115_PID	0x0115
+#define MTXORB_FTDI_RANGE_0116_PID	0x0116
+#define MTXORB_FTDI_RANGE_0117_PID	0x0117
+#define MTXORB_FTDI_RANGE_0118_PID	0x0118
+#define MTXORB_FTDI_RANGE_0119_PID	0x0119
+#define MTXORB_FTDI_RANGE_011A_PID	0x011A
+#define MTXORB_FTDI_RANGE_011B_PID	0x011B
+#define MTXORB_FTDI_RANGE_011C_PID	0x011C
+#define MTXORB_FTDI_RANGE_011D_PID	0x011D
+#define MTXORB_FTDI_RANGE_011E_PID	0x011E
+#define MTXORB_FTDI_RANGE_011F_PID	0x011F
+#define MTXORB_FTDI_RANGE_0120_PID	0x0120
+#define MTXORB_FTDI_RANGE_0121_PID	0x0121
+#define MTXORB_FTDI_RANGE_0122_PID	0x0122
+#define MTXORB_FTDI_RANGE_0123_PID	0x0123
+#define MTXORB_FTDI_RANGE_0124_PID	0x0124
+#define MTXORB_FTDI_RANGE_0125_PID	0x0125
+#define MTXORB_FTDI_RANGE_0126_PID	0x0126
+#define MTXORB_FTDI_RANGE_0127_PID	0x0127
+#define MTXORB_FTDI_RANGE_0128_PID	0x0128
+#define MTXORB_FTDI_RANGE_0129_PID	0x0129
+#define MTXORB_FTDI_RANGE_012A_PID	0x012A
+#define MTXORB_FTDI_RANGE_012B_PID	0x012B
+#define MTXORB_FTDI_RANGE_012C_PID	0x012C
+#define MTXORB_FTDI_RANGE_012D_PID	0x012D
+#define MTXORB_FTDI_RANGE_012E_PID	0x012E
+#define MTXORB_FTDI_RANGE_012F_PID	0x012F
+#define MTXORB_FTDI_RANGE_0130_PID	0x0130
+#define MTXORB_FTDI_RANGE_0131_PID	0x0131
+#define MTXORB_FTDI_RANGE_0132_PID	0x0132
+#define MTXORB_FTDI_RANGE_0133_PID	0x0133
+#define MTXORB_FTDI_RANGE_0134_PID	0x0134
+#define MTXORB_FTDI_RANGE_0135_PID	0x0135
+#define MTXORB_FTDI_RANGE_0136_PID	0x0136
+#define MTXORB_FTDI_RANGE_0137_PID	0x0137
+#define MTXORB_FTDI_RANGE_0138_PID	0x0138
+#define MTXORB_FTDI_RANGE_0139_PID	0x0139
+#define MTXORB_FTDI_RANGE_013A_PID	0x013A
+#define MTXORB_FTDI_RANGE_013B_PID	0x013B
+#define MTXORB_FTDI_RANGE_013C_PID	0x013C
+#define MTXORB_FTDI_RANGE_013D_PID	0x013D
+#define MTXORB_FTDI_RANGE_013E_PID	0x013E
+#define MTXORB_FTDI_RANGE_013F_PID	0x013F
+#define MTXORB_FTDI_RANGE_0140_PID	0x0140
+#define MTXORB_FTDI_RANGE_0141_PID	0x0141
+#define MTXORB_FTDI_RANGE_0142_PID	0x0142
+#define MTXORB_FTDI_RANGE_0143_PID	0x0143
+#define MTXORB_FTDI_RANGE_0144_PID	0x0144
+#define MTXORB_FTDI_RANGE_0145_PID	0x0145
+#define MTXORB_FTDI_RANGE_0146_PID	0x0146
+#define MTXORB_FTDI_RANGE_0147_PID	0x0147
+#define MTXORB_FTDI_RANGE_0148_PID	0x0148
+#define MTXORB_FTDI_RANGE_0149_PID	0x0149
+#define MTXORB_FTDI_RANGE_014A_PID	0x014A
+#define MTXORB_FTDI_RANGE_014B_PID	0x014B
+#define MTXORB_FTDI_RANGE_014C_PID	0x014C
+#define MTXORB_FTDI_RANGE_014D_PID	0x014D
+#define MTXORB_FTDI_RANGE_014E_PID	0x014E
+#define MTXORB_FTDI_RANGE_014F_PID	0x014F
+#define MTXORB_FTDI_RANGE_0150_PID	0x0150
+#define MTXORB_FTDI_RANGE_0151_PID	0x0151
+#define MTXORB_FTDI_RANGE_0152_PID	0x0152
+#define MTXORB_FTDI_RANGE_0153_PID	0x0153
+#define MTXORB_FTDI_RANGE_0154_PID	0x0154
+#define MTXORB_FTDI_RANGE_0155_PID	0x0155
+#define MTXORB_FTDI_RANGE_0156_PID	0x0156
+#define MTXORB_FTDI_RANGE_0157_PID	0x0157
+#define MTXORB_FTDI_RANGE_0158_PID	0x0158
+#define MTXORB_FTDI_RANGE_0159_PID	0x0159
+#define MTXORB_FTDI_RANGE_015A_PID	0x015A
+#define MTXORB_FTDI_RANGE_015B_PID	0x015B
+#define MTXORB_FTDI_RANGE_015C_PID	0x015C
+#define MTXORB_FTDI_RANGE_015D_PID	0x015D
+#define MTXORB_FTDI_RANGE_015E_PID	0x015E
+#define MTXORB_FTDI_RANGE_015F_PID	0x015F
+#define MTXORB_FTDI_RANGE_0160_PID	0x0160
+#define MTXORB_FTDI_RANGE_0161_PID	0x0161
+#define MTXORB_FTDI_RANGE_0162_PID	0x0162
+#define MTXORB_FTDI_RANGE_0163_PID	0x0163
+#define MTXORB_FTDI_RANGE_0164_PID	0x0164
+#define MTXORB_FTDI_RANGE_0165_PID	0x0165
+#define MTXORB_FTDI_RANGE_0166_PID	0x0166
+#define MTXORB_FTDI_RANGE_0167_PID	0x0167
+#define MTXORB_FTDI_RANGE_0168_PID	0x0168
+#define MTXORB_FTDI_RANGE_0169_PID	0x0169
+#define MTXORB_FTDI_RANGE_016A_PID	0x016A
+#define MTXORB_FTDI_RANGE_016B_PID	0x016B
+#define MTXORB_FTDI_RANGE_016C_PID	0x016C
+#define MTXORB_FTDI_RANGE_016D_PID	0x016D
+#define MTXORB_FTDI_RANGE_016E_PID	0x016E
+#define MTXORB_FTDI_RANGE_016F_PID	0x016F
+#define MTXORB_FTDI_RANGE_0170_PID	0x0170
+#define MTXORB_FTDI_RANGE_0171_PID	0x0171
+#define MTXORB_FTDI_RANGE_0172_PID	0x0172
+#define MTXORB_FTDI_RANGE_0173_PID	0x0173
+#define MTXORB_FTDI_RANGE_0174_PID	0x0174
+#define MTXORB_FTDI_RANGE_0175_PID	0x0175
+#define MTXORB_FTDI_RANGE_0176_PID	0x0176
+#define MTXORB_FTDI_RANGE_0177_PID	0x0177
+#define MTXORB_FTDI_RANGE_0178_PID	0x0178
+#define MTXORB_FTDI_RANGE_0179_PID	0x0179
+#define MTXORB_FTDI_RANGE_017A_PID	0x017A
+#define MTXORB_FTDI_RANGE_017B_PID	0x017B
+#define MTXORB_FTDI_RANGE_017C_PID	0x017C
+#define MTXORB_FTDI_RANGE_017D_PID	0x017D
+#define MTXORB_FTDI_RANGE_017E_PID	0x017E
+#define MTXORB_FTDI_RANGE_017F_PID	0x017F
+#define MTXORB_FTDI_RANGE_0180_PID	0x0180
+#define MTXORB_FTDI_RANGE_0181_PID	0x0181
+#define MTXORB_FTDI_RANGE_0182_PID	0x0182
+#define MTXORB_FTDI_RANGE_0183_PID	0x0183
+#define MTXORB_FTDI_RANGE_0184_PID	0x0184
+#define MTXORB_FTDI_RANGE_0185_PID	0x0185
+#define MTXORB_FTDI_RANGE_0186_PID	0x0186
+#define MTXORB_FTDI_RANGE_0187_PID	0x0187
+#define MTXORB_FTDI_RANGE_0188_PID	0x0188
+#define MTXORB_FTDI_RANGE_0189_PID	0x0189
+#define MTXORB_FTDI_RANGE_018A_PID	0x018A
+#define MTXORB_FTDI_RANGE_018B_PID	0x018B
+#define MTXORB_FTDI_RANGE_018C_PID	0x018C
+#define MTXORB_FTDI_RANGE_018D_PID	0x018D
+#define MTXORB_FTDI_RANGE_018E_PID	0x018E
+#define MTXORB_FTDI_RANGE_018F_PID	0x018F
+#define MTXORB_FTDI_RANGE_0190_PID	0x0190
+#define MTXORB_FTDI_RANGE_0191_PID	0x0191
+#define MTXORB_FTDI_RANGE_0192_PID	0x0192
+#define MTXORB_FTDI_RANGE_0193_PID	0x0193
+#define MTXORB_FTDI_RANGE_0194_PID	0x0194
+#define MTXORB_FTDI_RANGE_0195_PID	0x0195
+#define MTXORB_FTDI_RANGE_0196_PID	0x0196
+#define MTXORB_FTDI_RANGE_0197_PID	0x0197
+#define MTXORB_FTDI_RANGE_0198_PID	0x0198
+#define MTXORB_FTDI_RANGE_0199_PID	0x0199
+#define MTXORB_FTDI_RANGE_019A_PID	0x019A
+#define MTXORB_FTDI_RANGE_019B_PID	0x019B
+#define MTXORB_FTDI_RANGE_019C_PID	0x019C
+#define MTXORB_FTDI_RANGE_019D_PID	0x019D
+#define MTXORB_FTDI_RANGE_019E_PID	0x019E
+#define MTXORB_FTDI_RANGE_019F_PID	0x019F
+#define MTXORB_FTDI_RANGE_01A0_PID	0x01A0
+#define MTXORB_FTDI_RANGE_01A1_PID	0x01A1
+#define MTXORB_FTDI_RANGE_01A2_PID	0x01A2
+#define MTXORB_FTDI_RANGE_01A3_PID	0x01A3
+#define MTXORB_FTDI_RANGE_01A4_PID	0x01A4
+#define MTXORB_FTDI_RANGE_01A5_PID	0x01A5
+#define MTXORB_FTDI_RANGE_01A6_PID	0x01A6
+#define MTXORB_FTDI_RANGE_01A7_PID	0x01A7
+#define MTXORB_FTDI_RANGE_01A8_PID	0x01A8
+#define MTXORB_FTDI_RANGE_01A9_PID	0x01A9
+#define MTXORB_FTDI_RANGE_01AA_PID	0x01AA
+#define MTXORB_FTDI_RANGE_01AB_PID	0x01AB
+#define MTXORB_FTDI_RANGE_01AC_PID	0x01AC
+#define MTXORB_FTDI_RANGE_01AD_PID	0x01AD
+#define MTXORB_FTDI_RANGE_01AE_PID	0x01AE
+#define MTXORB_FTDI_RANGE_01AF_PID	0x01AF
+#define MTXORB_FTDI_RANGE_01B0_PID	0x01B0
+#define MTXORB_FTDI_RANGE_01B1_PID	0x01B1
+#define MTXORB_FTDI_RANGE_01B2_PID	0x01B2
+#define MTXORB_FTDI_RANGE_01B3_PID	0x01B3
+#define MTXORB_FTDI_RANGE_01B4_PID	0x01B4
+#define MTXORB_FTDI_RANGE_01B5_PID	0x01B5
+#define MTXORB_FTDI_RANGE_01B6_PID	0x01B6
+#define MTXORB_FTDI_RANGE_01B7_PID	0x01B7
+#define MTXORB_FTDI_RANGE_01B8_PID	0x01B8
+#define MTXORB_FTDI_RANGE_01B9_PID	0x01B9
+#define MTXORB_FTDI_RANGE_01BA_PID	0x01BA
+#define MTXORB_FTDI_RANGE_01BB_PID	0x01BB
+#define MTXORB_FTDI_RANGE_01BC_PID	0x01BC
+#define MTXORB_FTDI_RANGE_01BD_PID	0x01BD
+#define MTXORB_FTDI_RANGE_01BE_PID	0x01BE
+#define MTXORB_FTDI_RANGE_01BF_PID	0x01BF
+#define MTXORB_FTDI_RANGE_01C0_PID	0x01C0
+#define MTXORB_FTDI_RANGE_01C1_PID	0x01C1
+#define MTXORB_FTDI_RANGE_01C2_PID	0x01C2
+#define MTXORB_FTDI_RANGE_01C3_PID	0x01C3
+#define MTXORB_FTDI_RANGE_01C4_PID	0x01C4
+#define MTXORB_FTDI_RANGE_01C5_PID	0x01C5
+#define MTXORB_FTDI_RANGE_01C6_PID	0x01C6
+#define MTXORB_FTDI_RANGE_01C7_PID	0x01C7
+#define MTXORB_FTDI_RANGE_01C8_PID	0x01C8
+#define MTXORB_FTDI_RANGE_01C9_PID	0x01C9
+#define MTXORB_FTDI_RANGE_01CA_PID	0x01CA
+#define MTXORB_FTDI_RANGE_01CB_PID	0x01CB
+#define MTXORB_FTDI_RANGE_01CC_PID	0x01CC
+#define MTXORB_FTDI_RANGE_01CD_PID	0x01CD
+#define MTXORB_FTDI_RANGE_01CE_PID	0x01CE
+#define MTXORB_FTDI_RANGE_01CF_PID	0x01CF
+#define MTXORB_FTDI_RANGE_01D0_PID	0x01D0
+#define MTXORB_FTDI_RANGE_01D1_PID	0x01D1
+#define MTXORB_FTDI_RANGE_01D2_PID	0x01D2
+#define MTXORB_FTDI_RANGE_01D3_PID	0x01D3
+#define MTXORB_FTDI_RANGE_01D4_PID	0x01D4
+#define MTXORB_FTDI_RANGE_01D5_PID	0x01D5
+#define MTXORB_FTDI_RANGE_01D6_PID	0x01D6
+#define MTXORB_FTDI_RANGE_01D7_PID	0x01D7
+#define MTXORB_FTDI_RANGE_01D8_PID	0x01D8
+#define MTXORB_FTDI_RANGE_01D9_PID	0x01D9
+#define MTXORB_FTDI_RANGE_01DA_PID	0x01DA
+#define MTXORB_FTDI_RANGE_01DB_PID	0x01DB
+#define MTXORB_FTDI_RANGE_01DC_PID	0x01DC
+#define MTXORB_FTDI_RANGE_01DD_PID	0x01DD
+#define MTXORB_FTDI_RANGE_01DE_PID	0x01DE
+#define MTXORB_FTDI_RANGE_01DF_PID	0x01DF
+#define MTXORB_FTDI_RANGE_01E0_PID	0x01E0
+#define MTXORB_FTDI_RANGE_01E1_PID	0x01E1
+#define MTXORB_FTDI_RANGE_01E2_PID	0x01E2
+#define MTXORB_FTDI_RANGE_01E3_PID	0x01E3
+#define MTXORB_FTDI_RANGE_01E4_PID	0x01E4
+#define MTXORB_FTDI_RANGE_01E5_PID	0x01E5
+#define MTXORB_FTDI_RANGE_01E6_PID	0x01E6
+#define MTXORB_FTDI_RANGE_01E7_PID	0x01E7
+#define MTXORB_FTDI_RANGE_01E8_PID	0x01E8
+#define MTXORB_FTDI_RANGE_01E9_PID	0x01E9
+#define MTXORB_FTDI_RANGE_01EA_PID	0x01EA
+#define MTXORB_FTDI_RANGE_01EB_PID	0x01EB
+#define MTXORB_FTDI_RANGE_01EC_PID	0x01EC
+#define MTXORB_FTDI_RANGE_01ED_PID	0x01ED
+#define MTXORB_FTDI_RANGE_01EE_PID	0x01EE
+#define MTXORB_FTDI_RANGE_01EF_PID	0x01EF
+#define MTXORB_FTDI_RANGE_01F0_PID	0x01F0
+#define MTXORB_FTDI_RANGE_01F1_PID	0x01F1
+#define MTXORB_FTDI_RANGE_01F2_PID	0x01F2
+#define MTXORB_FTDI_RANGE_01F3_PID	0x01F3
+#define MTXORB_FTDI_RANGE_01F4_PID	0x01F4
+#define MTXORB_FTDI_RANGE_01F5_PID	0x01F5
+#define MTXORB_FTDI_RANGE_01F6_PID	0x01F6
+#define MTXORB_FTDI_RANGE_01F7_PID	0x01F7
+#define MTXORB_FTDI_RANGE_01F8_PID	0x01F8
+#define MTXORB_FTDI_RANGE_01F9_PID	0x01F9
+#define MTXORB_FTDI_RANGE_01FA_PID	0x01FA
+#define MTXORB_FTDI_RANGE_01FB_PID	0x01FB
+#define MTXORB_FTDI_RANGE_01FC_PID	0x01FC
+#define MTXORB_FTDI_RANGE_01FD_PID	0x01FD
+#define MTXORB_FTDI_RANGE_01FE_PID	0x01FE
+#define MTXORB_FTDI_RANGE_01FF_PID	0x01FF
+
+
+
+/*
+ * The Mobility Lab (TML)
+ * Submitted by Pierre Castella
+ */
+#define TML_VID			0x1B91	/* Vendor ID */
+#define TML_USB_SERIAL_PID	0x0064	/* USB - Serial Converter */
+
+/* Alti-2 products  http://www.alti-2.com */
+#define ALTI2_VID	0x1BC9
+#define ALTI2_N3_PID	0x6001	/* Neptune 3 */
+
+/*
+ * Dresden Elektronic Sensor Terminal Board
+ */
+#define DE_VID			0x1cf1 /* Vendor ID */
+#define STB_PID			0x0001 /* Sensor Terminal Board */
+#define WHT_PID			0x0004 /* Wireless Handheld Terminal */
+
+/*
+ * Papouch products (http://www.papouch.com/)
+ * Submitted by Folkert van Heusden
+ */
+
+#define PAPOUCH_VID			0x5050	/* Vendor ID */
+#define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
+#define PAPOUCH_QUIDO4x4_PID		0x0900	/* Quido 4/4 Module */
+
+/*
+ * Marvell SheevaPlug
+ */
+#define MARVELL_VID		0x9e88
+#define MARVELL_SHEEVAPLUG_PID	0x9e8f
+
+/*
+ * Evolution Robotics products (http://www.evolution.com/).
+ * Submitted by Shawn M. Lavelle.
+ */
+#define EVOLUTION_VID		0xDEEE	/* Vendor ID */
+#define EVOLUTION_ER1_PID	0x0300	/* ER1 Control Module */
+#define EVO_8U232AM_PID	0x02FF	/* Evolution robotics RCM2 (FT232AM)*/
+#define EVO_HYBRID_PID		0x0302	/* Evolution robotics RCM4 PID (FT232BM)*/
+#define EVO_RCM4_PID		0x0303	/* Evolution robotics RCM4 PID */
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 485fa9c5b107..2cfe2451ed97 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -127,8 +127,9 @@
 #define BANDB_DEVICE_ID_US9ML2_4	0xAC30
 #define BANDB_DEVICE_ID_USPTL4_2	0xAC31
 #define BANDB_DEVICE_ID_USPTL4_4	0xAC32
-#define BANDB_DEVICE_ID_USOPTL4_2       0xAC42
-#define BANDB_DEVICE_ID_USOPTL4_4       0xAC44
+#define BANDB_DEVICE_ID_USOPTL4_2	0xAC42
+#define BANDB_DEVICE_ID_USOPTL4_4	0xAC44
+#define BANDB_DEVICE_ID_USOPTL2_4	0xAC24
 
 /* This driver also supports
  * ATEN UC2324 device using Moschip MCS7840
@@ -191,6 +192,7 @@ static struct usb_device_id moschip_port_id_table[] = {
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{}			/* terminating entry */
@@ -207,6 +209,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
+	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{}			/* terminating entry */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 9a2b903492ec..6e94a6711f08 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -340,6 +340,10 @@ static int  option_resume(struct usb_serial *serial);
 #define FOUR_G_SYSTEMS_VENDOR_ID		0x1c9e
 #define FOUR_G_SYSTEMS_PRODUCT_W14		0x9603
 
+/* Haier products */
+#define HAIER_VENDOR_ID				0x201e
+#define HAIER_PRODUCT_CE100			0x2009
+
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -641,6 +645,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
 	{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
 	{ USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) },
+	{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);