Merge branch 'next/alchemy' into mips-for-linux-next

18 files changed, 1299 insertions, 2007 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a3afac4be734..cbe7a2fb779f 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -299,11 +299,11 @@ config I2C_AT91
 	  unless your system can cope with those limitations.
 
 config I2C_AU1550
-	tristate "Au1550/Au1200 SMBus interface"
+	tristate "Au1550/Au1200/Au1300 SMBus interface"
 	depends on MIPS_ALCHEMY
 	help
 	  If you say yes to this option, support will be included for the
-	  Au1550 and Au1200 SMBus interface.
+	  Au1550/Au1200/Au1300 SMBus interface.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-au1550.
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index 5d3b9ae64523..dbd0c8a4e98a 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -153,6 +153,7 @@ static inline int has_dbdma(void)
 {
 	switch (alchemy_get_cputype()) {
 	case ALCHEMY_CPU_AU1200:
+	case ALCHEMY_CPU_AU1300:
 		return 1;
 	default:
 		return 0;
@@ -768,11 +769,15 @@ static void au1xmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	config2 = au_readl(HOST_CONFIG2(host));
 	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_8:
+		config2 |= SD_CONFIG2_BB;
+		break;
 	case MMC_BUS_WIDTH_4:
+		config2 &= ~SD_CONFIG2_BB;
 		config2 |= SD_CONFIG2_WB;
 		break;
 	case MMC_BUS_WIDTH_1:
-		config2 &= ~SD_CONFIG2_WB;
+		config2 &= ~(SD_CONFIG2_WB | SD_CONFIG2_BB);
 		break;
 	}
 	au_writel(config2, HOST_CONFIG2(host));
@@ -943,7 +948,7 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
 	struct mmc_host *mmc;
 	struct au1xmmc_host *host;
 	struct resource *r;
-	int ret;
+	int ret, iflag;
 
 	mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev);
 	if (!mmc) {
@@ -982,37 +987,43 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "no IRQ defined\n");
 		goto out3;
 	}
-
 	host->irq = r->start;
-	/* IRQ is shared among both SD controllers */
-	ret = request_irq(host->irq, au1xmmc_irq, IRQF_SHARED,
-			  DRIVER_NAME, host);
-	if (ret) {
-		dev_err(&pdev->dev, "cannot grab IRQ\n");
-		goto out3;
-	}
 
 	mmc->ops = &au1xmmc_ops;
 
 	mmc->f_min =   450000;
 	mmc->f_max = 24000000;
 
+	mmc->max_blk_size = 2048;
+	mmc->max_blk_count = 512;
+
+	mmc->ocr_avail = AU1XMMC_OCR;
+	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+	mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+
+	iflag = IRQF_SHARED;	/* Au1100/Au1200: one int for both ctrls */
+
 	switch (alchemy_get_cputype()) {
 	case ALCHEMY_CPU_AU1100:
 		mmc->max_seg_size = AU1100_MMC_DESCRIPTOR_SIZE;
-		mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
 		break;
 	case ALCHEMY_CPU_AU1200:
 		mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE;
-		mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+		break;
+	case ALCHEMY_CPU_AU1300:
+		iflag = 0;	/* nothing is shared */
+		mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE;
+		mmc->f_max = 52000000;
+		if (host->ioarea->start == AU1100_SD0_PHYS_ADDR)
+			mmc->caps |= MMC_CAP_8_BIT_DATA;
 		break;
 	}
 
-	mmc->max_blk_size = 2048;
-	mmc->max_blk_count = 512;
-
-	mmc->ocr_avail = AU1XMMC_OCR;
-	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+	ret = request_irq(host->irq, au1xmmc_irq, iflag, DRIVER_NAME, host);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot grab IRQ\n");
+		goto out3;
+	}
 
 	host->status = HOST_S_IDLE;
 
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 7dd3700f2303..73abbc3e093e 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -17,35 +17,19 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
 #include <asm/io.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1550nd.h>
 
-#ifdef CONFIG_MIPS_PB1550
-#include <asm/mach-pb1x00/pb1550.h>
-#elif defined(CONFIG_MIPS_DB1550)
-#include <asm/mach-db1x00/db1x00.h>
-#endif
-#include <asm/mach-db1x00/bcsr.h>
 
-/*
- * MTD structure for NAND controller
- */
-static struct mtd_info *au1550_mtd = NULL;
-static void __iomem *p_nand;
-static int nand_width = 1;	/* default x8 */
-static void (*au1550_write_byte)(struct mtd_info *, u_char);
+struct au1550nd_ctx {
+	struct mtd_info info;
+	struct nand_chip chip;
 
-/*
- * Define partitions for flash device
- */
-static const struct mtd_partition partition_info[] = {
-	{
-	 .name = "NAND FS 0",
-	 .offset = 0,
-	 .size = 8 * 1024 * 1024},
-	{
-	 .name = "NAND FS 1",
-	 .offset = MTDPART_OFS_APPEND,
-	 .size = MTDPART_SIZ_FULL}
+	int cs;
+	void __iomem *base;
+	void (*write_byte)(struct mtd_info *, u_char);
 };
 
 /**
@@ -259,24 +243,25 @@ static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
 
 static void au1550_hwcontrol(struct mtd_info *mtd, int cmd)
 {
-	register struct nand_chip *this = mtd->priv;
+	struct au1550nd_ctx *ctx = container_of(mtd, struct au1550nd_ctx, info);
+	struct nand_chip *this = mtd->priv;
 
 	switch (cmd) {
 
 	case NAND_CTL_SETCLE:
-		this->IO_ADDR_W = p_nand + MEM_STNAND_CMD;
+		this->IO_ADDR_W = ctx->base + MEM_STNAND_CMD;
 		break;
 
 	case NAND_CTL_CLRCLE:
-		this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
+		this->IO_ADDR_W = ctx->base + MEM_STNAND_DATA;
 		break;
 
 	case NAND_CTL_SETALE:
-		this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR;
+		this->IO_ADDR_W = ctx->base + MEM_STNAND_ADDR;
 		break;
 
 	case NAND_CTL_CLRALE:
-		this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
+		this->IO_ADDR_W = ctx->base + MEM_STNAND_DATA;
 		/* FIXME: Nobody knows why this is necessary,
 		 * but it works only that way */
 		udelay(1);
@@ -284,7 +269,7 @@ static void au1550_hwcontrol(struct mtd_info *mtd, int cmd)
 
 	case NAND_CTL_SETNCE:
 		/* assert (force assert) chip enable */
-		au_writel((1 << (4 + NAND_CS)), MEM_STNDCTL);
+		au_writel((1 << (4 + ctx->cs)), MEM_STNDCTL);
 		break;
 
 	case NAND_CTL_CLRNCE:
@@ -331,9 +316,10 @@ static void au1550_select_chip(struct mtd_info *mtd, int chip)
  */
 static void au1550_command(struct mtd_info *mtd, unsigned command, int column, int page_addr)
 {
-	register struct nand_chip *this = mtd->priv;
+	struct au1550nd_ctx *ctx = container_of(mtd, struct au1550nd_ctx, info);
+	struct nand_chip *this = mtd->priv;
 	int ce_override = 0, i;
-	ulong flags;
+	unsigned long flags = 0;
 
 	/* Begin command latch cycle */
 	au1550_hwcontrol(mtd, NAND_CTL_SETCLE);
@@ -354,9 +340,9 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i
 			column -= 256;
 			readcmd = NAND_CMD_READ1;
 		}
-		au1550_write_byte(mtd, readcmd);
+		ctx->write_byte(mtd, readcmd);
 	}
-	au1550_write_byte(mtd, command);
+	ctx->write_byte(mtd, command);
 
 	/* Set ALE and clear CLE to start address cycle */
 	au1550_hwcontrol(mtd, NAND_CTL_CLRCLE);
@@ -369,10 +355,10 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i
 			/* Adjust columns for 16 bit buswidth */
 			if (this->options & NAND_BUSWIDTH_16)
 				column >>= 1;
-			au1550_write_byte(mtd, column);
+			ctx->write_byte(mtd, column);
 		}
 		if (page_addr != -1) {
-			au1550_write_byte(mtd, (u8)(page_addr & 0xff));
+			ctx->write_byte(mtd, (u8)(page_addr & 0xff));
 
 			if (command == NAND_CMD_READ0 ||
 			    command == NAND_CMD_READ1 ||
@@ -390,11 +376,12 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i
 				au1550_hwcontrol(mtd, NAND_CTL_SETNCE);
 			}
 
-			au1550_write_byte(mtd, (u8)(page_addr >> 8));
+			ctx->write_byte(mtd, (u8)(page_addr >> 8));
 
 			/* One more address cycle for devices > 32MiB */
 			if (this->chipsize > (32 << 20))
-				au1550_write_byte(mtd, (u8)((page_addr >> 16) & 0x0f));
+				ctx->write_byte(mtd,
+						((page_addr >> 16) & 0x0f));
 		}
 		/* Latch in address */
 		au1550_hwcontrol(mtd, NAND_CTL_CLRALE);
@@ -440,121 +427,79 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i
 	while(!this->dev_ready(mtd));
 }
 
-
-/*
- * Main initialization routine
- */
-static int __init au1xxx_nand_init(void)
+static int __devinit find_nand_cs(unsigned long nand_base)
 {
-	struct nand_chip *this;
-	u16 boot_swapboot = 0;	/* default value */
-	int retval;
-	u32 mem_staddr;
-	u32 nand_phys;
-
-	/* Allocate memory for MTD device structure and private data */
-	au1550_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-	if (!au1550_mtd) {
-		printk("Unable to allocate NAND MTD dev structure.\n");
-		return -ENOMEM;
-	}
-
-	/* Get pointer to private data */
-	this = (struct nand_chip *)(&au1550_mtd[1]);
-
-	/* Link the private data with the MTD structure */
-	au1550_mtd->priv = this;
-	au1550_mtd->owner = THIS_MODULE;
-
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR);
+	unsigned long addr, staddr, start, mask, end;
+	int i;
 
-	/* MEM_STNDCTL: disable ints, disable nand boot */
-	au_writel(0, MEM_STNDCTL);
+	for (i = 0; i < 4; i++) {
+		addr = 0x1000 + (i * 0x10);			/* CSx */
+		staddr = __raw_readl(base + addr + 0x08);	/* STADDRx */
+		/* figure out the decoded range of this CS */
+		start = (staddr << 4) & 0xfffc0000;
+		mask = (staddr << 18) & 0xfffc0000;
+		end = (start | (start - 1)) & ~(start ^ mask);
+		if ((nand_base >= start) && (nand_base < end))
+			return i;
+	}
 
-#ifdef CONFIG_MIPS_PB1550
-	/* set gpio206 high */
-	gpio_direction_input(206);
+	return -ENODEV;
+}
 
-	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr_read(BCSR_STATUS) >> 6) & 0x1);
+static int __devinit au1550nd_probe(struct platform_device *pdev)
+{
+	struct au1550nd_platdata *pd;
+	struct au1550nd_ctx *ctx;
+	struct nand_chip *this;
+	struct resource *r;
+	int ret, cs;
 
-	switch (boot_swapboot) {
-	case 0:
-	case 2:
-	case 8:
-	case 0xC:
-	case 0xD:
-		/* x16 NAND Flash */
-		nand_width = 0;
-		break;
-	case 1:
-	case 9:
-	case 3:
-	case 0xE:
-	case 0xF:
-		/* x8 NAND Flash */
-		nand_width = 1;
-		break;
-	default:
-		printk("Pb1550 NAND: bad boot:swap\n");
-		retval = -EINVAL;
-		goto outmem;
+	pd = pdev->dev.platform_data;
+	if (!pd) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		return -ENODEV;
 	}
-#endif
-
-	/* Configure chip-select; normally done by boot code, e.g. YAMON */
-#ifdef NAND_STCFG
-	if (NAND_CS == 0) {
-		au_writel(NAND_STCFG,  MEM_STCFG0);
-		au_writel(NAND_STTIME, MEM_STTIME0);
-		au_writel(NAND_STADDR, MEM_STADDR0);
-	}
-	if (NAND_CS == 1) {
-		au_writel(NAND_STCFG,  MEM_STCFG1);
-		au_writel(NAND_STTIME, MEM_STTIME1);
-		au_writel(NAND_STADDR, MEM_STADDR1);
+
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx) {
+		dev_err(&pdev->dev, "no memory for NAND context\n");
+		return -ENOMEM;
 	}
-	if (NAND_CS == 2) {
-		au_writel(NAND_STCFG,  MEM_STCFG2);
-		au_writel(NAND_STTIME, MEM_STTIME2);
-		au_writel(NAND_STADDR, MEM_STADDR2);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "no NAND memory resource\n");
+		ret = -ENODEV;
+		goto out1;
 	}
-	if (NAND_CS == 3) {
-		au_writel(NAND_STCFG,  MEM_STCFG3);
-		au_writel(NAND_STTIME, MEM_STTIME3);
-		au_writel(NAND_STADDR, MEM_STADDR3);
+	if (request_mem_region(r->start, resource_size(r), "au1550-nand")) {
+		dev_err(&pdev->dev, "cannot claim NAND memory area\n");
+		ret = -ENOMEM;
+		goto out1;
 	}
-#endif
-
-	/* Locate NAND chip-select in order to determine NAND phys address */
-	mem_staddr = 0x00000000;
-	if (((au_readl(MEM_STCFG0) & 0x7) == 0x5) && (NAND_CS == 0))
-		mem_staddr = au_readl(MEM_STADDR0);
-	else if (((au_readl(MEM_STCFG1) & 0x7) == 0x5) && (NAND_CS == 1))
-		mem_staddr = au_readl(MEM_STADDR1);
-	else if (((au_readl(MEM_STCFG2) & 0x7) == 0x5) && (NAND_CS == 2))
-		mem_staddr = au_readl(MEM_STADDR2);
-	else if (((au_readl(MEM_STCFG3) & 0x7) == 0x5) && (NAND_CS == 3))
-		mem_staddr = au_readl(MEM_STADDR3);
-
-	if (mem_staddr == 0x00000000) {
-		printk("Au1xxx NAND: ERROR WITH NAND CHIP-SELECT\n");
-		kfree(au1550_mtd);
-		return 1;
+
+	ctx->base = ioremap_nocache(r->start, 0x1000);
+	if (!ctx->base) {
+		dev_err(&pdev->dev, "cannot remap NAND memory area\n");
+		ret = -ENODEV;
+		goto out2;
 	}
-	nand_phys = (mem_staddr << 4) & 0xFFFC0000;
 
-	p_nand = ioremap(nand_phys, 0x1000);
+	this = &ctx->chip;
+	ctx->info.priv = this;
+	ctx->info.owner = THIS_MODULE;
 
-	/* make controller and MTD agree */
-	if (NAND_CS == 0)
-		nand_width = au_readl(MEM_STCFG0) & (1 << 22);
-	if (NAND_CS == 1)
-		nand_width = au_readl(MEM_STCFG1) & (1 << 22);
-	if (NAND_CS == 2)
-		nand_width = au_readl(MEM_STCFG2) & (1 << 22);
-	if (NAND_CS == 3)
-		nand_width = au_readl(MEM_STCFG3) & (1 << 22);
+	/* figure out which CS# r->start belongs to */
+	cs = find_nand_cs(r->start);
+	if (cs < 0) {
+		dev_err(&pdev->dev, "cannot detect NAND chipselect\n");
+		ret = -ENODEV;
+		goto out3;
+	}
+	ctx->cs = cs;
 
-	/* Set address of hardware control function */
 	this->dev_ready = au1550_device_ready;
 	this->select_chip = au1550_select_chip;
 	this->cmdfunc = au1550_command;
@@ -565,54 +510,57 @@ static int __init au1xxx_nand_init(void)
 
 	this->options = NAND_NO_AUTOINCR;
 
-	if (!nand_width)
+	if (pd->devwidth)
 		this->options |= NAND_BUSWIDTH_16;
 
-	this->read_byte = (!nand_width) ? au_read_byte16 : au_read_byte;
-	au1550_write_byte = (!nand_width) ? au_write_byte16 : au_write_byte;
+	this->read_byte = (pd->devwidth) ? au_read_byte16 : au_read_byte;
+	ctx->write_byte = (pd->devwidth) ? au_write_byte16 : au_write_byte;
 	this->read_word = au_read_word;
-	this->write_buf = (!nand_width) ? au_write_buf16 : au_write_buf;
-	this->read_buf = (!nand_width) ? au_read_buf16 : au_read_buf;
-	this->verify_buf = (!nand_width) ? au_verify_buf16 : au_verify_buf;
-
-	/* Scan to find existence of the device */
-	if (nand_scan(au1550_mtd, 1)) {
-		retval = -ENXIO;
-		goto outio;
+	this->write_buf = (pd->devwidth) ? au_write_buf16 : au_write_buf;
+	this->read_buf = (pd->devwidth) ? au_read_buf16 : au_read_buf;
+	this->verify_buf = (pd->devwidth) ? au_verify_buf16 : au_verify_buf;
+
+	ret = nand_scan(&ctx->info, 1);
+	if (ret) {
+		dev_err(&pdev->dev, "NAND scan failed with %d\n", ret);
+		goto out3;
 	}
 
-	/* Register the partitions */
-	mtd_device_register(au1550_mtd, partition_info,
-			    ARRAY_SIZE(partition_info));
+	mtd_device_register(&ctx->info, pd->parts, pd->num_parts);
 
 	return 0;
 
- outio:
-	iounmap(p_nand);
-
- outmem:
-	kfree(au1550_mtd);
-	return retval;
+out3:
+	iounmap(ctx->base);
+out2:
+	release_mem_region(r->start, resource_size(r));
+out1:
+	kfree(ctx);
+	return ret;
 }
 
-module_init(au1xxx_nand_init);
-
-/*
- * Clean up routine
- */
-static void __exit au1550_cleanup(void)
+static int __devexit au1550nd_remove(struct platform_device *pdev)
 {
-	/* Release resources, unregister device */
-	nand_release(au1550_mtd);
+	struct au1550nd_ctx *ctx = platform_get_drvdata(pdev);
+	struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
-	/* Free the MTD device structure */
-	kfree(au1550_mtd);
-
-	/* Unmap */
-	iounmap(p_nand);
+	nand_release(&ctx->info);
+	iounmap(ctx->base);
+	release_mem_region(r->start, 0x1000);
+	kfree(ctx);
+	return 0;
 }
 
-module_exit(au1550_cleanup);
+static struct platform_driver au1550nd_driver = {
+	.driver = {
+		.name	= "au1550-nand",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= au1550nd_probe,
+	.remove		= __devexit_p(au1550nd_remove),
+};
+
+module_platform_driver(au1550nd_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Embedded Edge, LLC");
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index d423d18b4ad6..e535137eb2d0 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -313,8 +313,12 @@ config TOSHIBA_FIR
 	  donauboe.
 
 config AU1000_FIR
-	tristate "Alchemy Au1000 SIR/FIR"
+	tristate "Alchemy IrDA SIR/FIR"
 	depends on IRDA && MIPS_ALCHEMY
+	help
+	  Say Y/M here to build suppor the the IrDA peripheral on the
+	  Alchemy Au1000 and Au1100 SoCs.
+	  Say M to build a module; it will be called au1k_ir.ko
 
 config SMC_IRCC_FIR
 	tristate "SMSC IrCC (EXPERIMENTAL)"
diff --git a/drivers/net/irda/au1000_ircc.h b/drivers/net/irda/au1000_ircc.h
deleted file mode 100644
index c072c09a8d91..000000000000
--- a/drivers/net/irda/au1000_ircc.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Au1000 IrDA driver.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef AU1000_IRCC_H
-#define AU1000_IRCC_H
-
-#include <linux/time.h>
-
-#include <linux/spinlock.h>
-#include <linux/pm.h>
-#include <asm/io.h>
-
-#define NUM_IR_IFF          1
-#define NUM_IR_DESC        64
-#define RING_SIZE_4       0x0
-#define RING_SIZE_16      0x3
-#define RING_SIZE_64      0xF
-#define MAX_NUM_IR_DESC    64
-#define MAX_BUF_SIZE     2048
-
-#define BPS_115200          0
-#define BPS_57600           1
-#define BPS_38400           2
-#define BPS_19200           5
-#define BPS_9600           11
-#define BPS_2400           47
-
-/* Ring descriptor flags */
-#define AU_OWN           (1<<7) /* tx,rx */
-
-#define IR_DIS_CRC       (1<<6) /* tx */
-#define IR_BAD_CRC       (1<<5) /* tx */
-#define IR_NEED_PULSE    (1<<4) /* tx */
-#define IR_FORCE_UNDER   (1<<3) /* tx */
-#define IR_DISABLE_TX    (1<<2) /* tx */
-#define IR_HW_UNDER      (1<<0) /* tx */
-#define IR_TX_ERROR      (IR_DIS_CRC|IR_BAD_CRC|IR_HW_UNDER)
-
-#define IR_PHY_ERROR     (1<<6) /* rx */
-#define IR_CRC_ERROR     (1<<5) /* rx */
-#define IR_MAX_LEN       (1<<4) /* rx */
-#define IR_FIFO_OVER     (1<<3) /* rx */
-#define IR_SIR_ERROR     (1<<2) /* rx */
-#define IR_RX_ERROR      (IR_PHY_ERROR|IR_CRC_ERROR| \
-		IR_MAX_LEN|IR_FIFO_OVER|IR_SIR_ERROR)
-
-typedef struct db_dest {
-	struct db_dest *pnext;
-	volatile u32 *vaddr;
-	dma_addr_t dma_addr;
-} db_dest_t;
-
-
-typedef struct ring_desc {
-	u8 count_0;               /* 7:0  */
-	u8 count_1;               /* 12:8 */
-	u8 reserved;
-	u8 flags;
-	u8 addr_0;                /* 7:0   */
-	u8 addr_1;                /* 15:8  */
-	u8 addr_2;                /* 23:16 */
-	u8 addr_3;                /* 31:24 */
-} ring_dest_t;
-
-
-/* Private data for each instance */
-struct au1k_private {
-
-	db_dest_t *pDBfree;
-	db_dest_t db[2*NUM_IR_DESC];
-	volatile ring_dest_t *rx_ring[NUM_IR_DESC];
-	volatile ring_dest_t *tx_ring[NUM_IR_DESC];
-	db_dest_t *rx_db_inuse[NUM_IR_DESC];
-	db_dest_t *tx_db_inuse[NUM_IR_DESC];
-	u32 rx_head;
-	u32 tx_head;
-	u32 tx_tail;
-	u32 tx_full;
-
-	iobuff_t rx_buff;
-
-	struct net_device *netdev;
-	
-	struct timeval stamp;
-	struct timeval now;
-	struct qos_info		qos;
-	struct irlap_cb		*irlap;
-	
-	u8 open;
-	u32 speed;
-	u32 newspeed;
-	
-	u32 intr_work_done; /* number of Rx and Tx pkts processed in the isr */
-	struct timer_list timer;
-
-	spinlock_t lock;           /* For serializing operations */
-};
-#endif /* AU1000_IRCC_H */
diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c
index a3d696a9456a..fc503aa5288e 100644
--- a/drivers/net/irda/au1k_ir.c
+++ b/drivers/net/irda/au1k_ir.c
@@ -18,104 +18,220 @@
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  */
-#include <linux/module.h>
-#include <linux/types.h>
+
 #include <linux/init.h>
-#include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/netdevice.h>
-#include <linux/slab.h>
-#include <linux/rtnetlink.h>
 #include <linux/interrupt.h>
-#include <linux/pm.h>
-#include <linux/bitops.h>
-
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/au1000.h>
-#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100)
-#include <asm/pb1000.h>
-#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-#include <asm/db1x00.h>
-#include <asm/mach-db1x00/bcsr.h>
-#else 
-#error au1k_ir: unsupported board
-#endif
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/types.h>
 
 #include <net/irda/irda.h>
 #include <net/irda/irmod.h>
 #include <net/irda/wrapper.h>
 #include <net/irda/irda_device.h>
-#include "au1000_ircc.h"
+#include <asm/mach-au1x00/au1000.h>
+
+/* registers */
+#define IR_RING_PTR_STATUS	0x00
+#define IR_RING_BASE_ADDR_H	0x04
+#define IR_RING_BASE_ADDR_L	0x08
+#define IR_RING_SIZE		0x0C
+#define IR_RING_PROMPT		0x10
+#define IR_RING_ADDR_CMPR	0x14
+#define IR_INT_CLEAR		0x18
+#define IR_CONFIG_1		0x20
+#define IR_SIR_FLAGS		0x24
+#define IR_STATUS		0x28
+#define IR_READ_PHY_CONFIG	0x2C
+#define IR_WRITE_PHY_CONFIG	0x30
+#define IR_MAX_PKT_LEN		0x34
+#define IR_RX_BYTE_CNT		0x38
+#define IR_CONFIG_2		0x3C
+#define IR_ENABLE		0x40
+
+/* Config1 */
+#define IR_RX_INVERT_LED	(1 << 0)
+#define IR_TX_INVERT_LED	(1 << 1)
+#define IR_ST			(1 << 2)
+#define IR_SF			(1 << 3)
+#define IR_SIR			(1 << 4)
+#define IR_MIR			(1 << 5)
+#define IR_FIR			(1 << 6)
+#define IR_16CRC		(1 << 7)
+#define IR_TD			(1 << 8)
+#define IR_RX_ALL		(1 << 9)
+#define IR_DMA_ENABLE		(1 << 10)
+#define IR_RX_ENABLE		(1 << 11)
+#define IR_TX_ENABLE		(1 << 12)
+#define IR_LOOPBACK		(1 << 14)
+#define IR_SIR_MODE		(IR_SIR | IR_DMA_ENABLE | \
+				 IR_RX_ALL | IR_RX_ENABLE | IR_SF | \
+				 IR_16CRC)
+
+/* ir_status */
+#define IR_RX_STATUS		(1 << 9)
+#define IR_TX_STATUS		(1 << 10)
+#define IR_PHYEN		(1 << 15)
+
+/* ir_write_phy_config */
+#define IR_BR(x)		(((x) & 0x3f) << 10)	/* baud rate */
+#define IR_PW(x)		(((x) & 0x1f) << 5)	/* pulse width */
+#define IR_P(x)			((x) & 0x1f)		/* preamble bits */
+
+/* Config2 */
+#define IR_MODE_INV		(1 << 0)
+#define IR_ONE_PIN		(1 << 1)
+#define IR_PHYCLK_40MHZ		(0 << 2)
+#define IR_PHYCLK_48MHZ		(1 << 2)
+#define IR_PHYCLK_56MHZ		(2 << 2)
+#define IR_PHYCLK_64MHZ		(3 << 2)
+#define IR_DP			(1 << 4)
+#define IR_DA			(1 << 5)
+#define IR_FLT_HIGH		(0 << 6)
+#define IR_FLT_MEDHI		(1 << 6)
+#define IR_FLT_MEDLO		(2 << 6)
+#define IR_FLT_LO		(3 << 6)
+#define IR_IEN			(1 << 8)
+
+/* ir_enable */
+#define IR_HC			(1 << 3)	/* divide SBUS clock by 2 */
+#define IR_CE			(1 << 2)	/* clock enable */
+#define IR_C			(1 << 1)	/* coherency bit */
+#define IR_BE			(1 << 0)	/* set in big endian mode */
+
+#define NUM_IR_DESC	64
+#define RING_SIZE_4	0x0
+#define RING_SIZE_16	0x3
+#define RING_SIZE_64	0xF
+#define MAX_NUM_IR_DESC	64
+#define MAX_BUF_SIZE	2048
+
+/* Ring descriptor flags */
+#define AU_OWN		(1 << 7) /* tx,rx */
+#define IR_DIS_CRC	(1 << 6) /* tx */
+#define IR_BAD_CRC	(1 << 5) /* tx */
+#define IR_NEED_PULSE	(1 << 4) /* tx */
+#define IR_FORCE_UNDER	(1 << 3) /* tx */
+#define IR_DISABLE_TX	(1 << 2) /* tx */
+#define IR_HW_UNDER	(1 << 0) /* tx */
+#define IR_TX_ERROR	(IR_DIS_CRC | IR_BAD_CRC | IR_HW_UNDER)
+
+#define IR_PHY_ERROR	(1 << 6) /* rx */
+#define IR_CRC_ERROR	(1 << 5) /* rx */
+#define IR_MAX_LEN	(1 << 4) /* rx */
+#define IR_FIFO_OVER	(1 << 3) /* rx */
+#define IR_SIR_ERROR	(1 << 2) /* rx */
+#define IR_RX_ERROR	(IR_PHY_ERROR | IR_CRC_ERROR | \
+			 IR_MAX_LEN | IR_FIFO_OVER | IR_SIR_ERROR)
+
+struct db_dest {
+	struct db_dest *pnext;
+	volatile u32 *vaddr;
+	dma_addr_t dma_addr;
+};
 
-static int au1k_irda_net_init(struct net_device *);
-static int au1k_irda_start(struct net_device *);
-static int au1k_irda_stop(struct net_device *dev);
-static int au1k_irda_hard_xmit(struct sk_buff *, struct net_device *);
-static int au1k_irda_rx(struct net_device *);
-static void au1k_irda_interrupt(int, void *);
-static void au1k_tx_timeout(struct net_device *);
-static int au1k_irda_ioctl(struct net_device *, struct ifreq *, int);
-static int au1k_irda_set_speed(struct net_device *dev, int speed);
+struct ring_dest {
+	u8 count_0;	/* 7:0  */
+	u8 count_1;	/* 12:8 */
+	u8 reserved;
+	u8 flags;
+	u8 addr_0;	/* 7:0   */
+	u8 addr_1;	/* 15:8  */
+	u8 addr_2;	/* 23:16 */
+	u8 addr_3;	/* 31:24 */
+};
 
-static void *dma_alloc(size_t, dma_addr_t *);
-static void dma_free(void *, size_t);
+/* Private data for each instance */
+struct au1k_private {
+	void __iomem *iobase;
+	int irq_rx, irq_tx;
+
+	struct db_dest *pDBfree;
+	struct db_dest db[2 * NUM_IR_DESC];
+	volatile struct ring_dest *rx_ring[NUM_IR_DESC];
+	volatile struct ring_dest *tx_ring[NUM_IR_DESC];
+	struct db_dest *rx_db_inuse[NUM_IR_DESC];
+	struct db_dest *tx_db_inuse[NUM_IR_DESC];
+	u32 rx_head;
+	u32 tx_head;
+	u32 tx_tail;
+	u32 tx_full;
+
+	iobuff_t rx_buff;
+
+	struct net_device *netdev;
+	struct timeval stamp;
+	struct timeval now;
+	struct qos_info qos;
+	struct irlap_cb *irlap;
+
+	u8 open;
+	u32 speed;
+	u32 newspeed;
+
+	struct timer_list timer;
+
+	struct resource *ioarea;
+	struct au1k_irda_platform_data *platdata;
+};
 
 static int qos_mtt_bits = 0x07;  /* 1 ms or more */
-static struct net_device *ir_devs[NUM_IR_IFF];
-static char version[] __devinitdata =
-    "au1k_ircc:1.2 ppopov@mvista.com\n";
 
 #define RUN_AT(x) (jiffies + (x))
 
-static DEFINE_SPINLOCK(ir_lock);
+static void au1k_irda_plat_set_phy_mode(struct au1k_private *p, int mode)
+{
+	if (p->platdata && p->platdata->set_phy_mode)
+		p->platdata->set_phy_mode(mode);
+}
 
-/*
- * IrDA peripheral bug. You have to read the register
- * twice to get the right value.
- */
-u32 read_ir_reg(u32 addr) 
-{ 
-	readl(addr);
-	return readl(addr);
+static inline unsigned long irda_read(struct au1k_private *p,
+				      unsigned long ofs)
+{
+	/*
+	* IrDA peripheral bug. You have to read the register
+	* twice to get the right value.
+	*/
+	(void)__raw_readl(p->iobase + ofs);
+	return __raw_readl(p->iobase + ofs);
 }
 
+static inline void irda_write(struct au1k_private *p, unsigned long ofs,
+			      unsigned long val)
+{
+	__raw_writel(val, p->iobase + ofs);
+	wmb();
+}
 
 /*
  * Buffer allocation/deallocation routines. The buffer descriptor returned
- * has the virtual and dma address of a buffer suitable for 
+ * has the virtual and dma address of a buffer suitable for
  * both, receive and transmit operations.
  */
-static db_dest_t *GetFreeDB(struct au1k_private *aup)
+static struct db_dest *GetFreeDB(struct au1k_private *aup)
 {
-	db_dest_t *pDB;
-	pDB = aup->pDBfree;
-
-	if (pDB) {
-		aup->pDBfree = pDB->pnext;
-	}
-	return pDB;
-}
+	struct db_dest *db;
+	db = aup->pDBfree;
 
-static void ReleaseDB(struct au1k_private *aup, db_dest_t *pDB)
-{
-	db_dest_t *pDBfree = aup->pDBfree;
-	if (pDBfree)
-		pDBfree->pnext = pDB;
-	aup->pDBfree = pDB;
+	if (db)
+		aup->pDBfree = db->pnext;
+	return db;
 }
 
-
 /*
   DMA memory allocation, derived from pci_alloc_consistent.
   However, the Au1000 data cache is coherent (when programmed
   so), therefore we return KSEG0 address, not KSEG1.
 */
-static void *dma_alloc(size_t size, dma_addr_t * dma_handle)
+static void *dma_alloc(size_t size, dma_addr_t *dma_handle)
 {
 	void *ret;
 	int gfp = GFP_ATOMIC | GFP_DMA;
 
-	ret = (void *) __get_free_pages(gfp, get_order(size));
+	ret = (void *)__get_free_pages(gfp, get_order(size));
 
 	if (ret != NULL) {
 		memset(ret, 0, size);
@@ -125,7 +241,6 @@ static void *dma_alloc(size_t size, dma_addr_t * dma_handle)
 	return ret;
 }
 
-
 static void dma_free(void *vaddr, size_t size)
 {
 	vaddr = (void *)KSEG0ADDR(vaddr);
@@ -133,206 +248,306 @@ static void dma_free(void *vaddr, size_t size)
 }
 
 
-static void 
-setup_hw_rings(struct au1k_private *aup, u32 rx_base, u32 tx_base)
+static void setup_hw_rings(struct au1k_private *aup, u32 rx_base, u32 tx_base)
 {
 	int i;
-	for (i=0; i<NUM_IR_DESC; i++) {
-		aup->rx_ring[i] = (volatile ring_dest_t *) 
-			(rx_base + sizeof(ring_dest_t)*i);
+	for (i = 0; i < NUM_IR_DESC; i++) {
+		aup->rx_ring[i] = (volatile struct ring_dest *)
+			(rx_base + sizeof(struct ring_dest) * i);
 	}
-	for (i=0; i<NUM_IR_DESC; i++) {
-		aup->tx_ring[i] = (volatile ring_dest_t *) 
-			(tx_base + sizeof(ring_dest_t)*i);
+	for (i = 0; i < NUM_IR_DESC; i++) {
+		aup->tx_ring[i] = (volatile struct ring_dest *)
+			(tx_base + sizeof(struct ring_dest) * i);
 	}
 }
 
-static int au1k_irda_init(void)
-{
-	static unsigned version_printed = 0;
-	struct au1k_private *aup;
-	struct net_device *dev;
-	int err;
-
-	if (version_printed++ == 0) printk(version);
-
-	dev = alloc_irdadev(sizeof(struct au1k_private));
-	if (!dev)
-		return -ENOMEM;
-
-	dev->irq = AU1000_IRDA_RX_INT; /* TX has its own interrupt */
-	err = au1k_irda_net_init(dev);
-	if (err)
-		goto out;
-	err = register_netdev(dev);
-	if (err)
-		goto out1;
-	ir_devs[0] = dev;
-	printk(KERN_INFO "IrDA: Registered device %s\n", dev->name);
-	return 0;
-
-out1:
-	aup = netdev_priv(dev);
-	dma_free((void *)aup->db[0].vaddr,
-		MAX_BUF_SIZE * 2*NUM_IR_DESC);
-	dma_free((void *)aup->rx_ring[0],
-		2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t)));
-	kfree(aup->rx_buff.head);
-out:
-	free_netdev(dev);
-	return err;
-}
-
 static int au1k_irda_init_iobuf(iobuff_t *io, int size)
 {
 	io->head = kmalloc(size, GFP_KERNEL);
 	if (io->head != NULL) {
-		io->truesize = size;
-		io->in_frame = FALSE;
-		io->state    = OUTSIDE_FRAME;
-		io->data     = io->head;
+		io->truesize	= size;
+		io->in_frame	= FALSE;
+		io->state	= OUTSIDE_FRAME;
+		io->data	= io->head;
 	}
 	return io->head ? 0 : -ENOMEM;
 }
 
-static const struct net_device_ops au1k_irda_netdev_ops = {
-	.ndo_open		= au1k_irda_start,
-	.ndo_stop		= au1k_irda_stop,
-	.ndo_start_xmit		= au1k_irda_hard_xmit,
-	.ndo_tx_timeout		= au1k_tx_timeout,
-	.ndo_do_ioctl		= au1k_irda_ioctl,
-};
-
-static int au1k_irda_net_init(struct net_device *dev)
+/*
+ * Set the IrDA communications speed.
+ */
+static int au1k_irda_set_speed(struct net_device *dev, int speed)
 {
 	struct au1k_private *aup = netdev_priv(dev);
-	int i, retval = 0, err;
-	db_dest_t *pDB, *pDBfree;
-	dma_addr_t temp;
+	volatile struct ring_dest *ptxd;
+	unsigned long control;
+	int ret = 0, timeout = 10, i;
 
-	err = au1k_irda_init_iobuf(&aup->rx_buff, 14384);
-	if (err)
-		goto out1;
+	if (speed == aup->speed)
+		return ret;
 
-	dev->netdev_ops = &au1k_irda_netdev_ops;
+	/* disable PHY first */
+	au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_OFF);
+	irda_write(aup, IR_STATUS, irda_read(aup, IR_STATUS) & ~IR_PHYEN);
 
-	irda_init_max_qos_capabilies(&aup->qos);
+	/* disable RX/TX */
+	irda_write(aup, IR_CONFIG_1,
+	    irda_read(aup, IR_CONFIG_1) & ~(IR_RX_ENABLE | IR_TX_ENABLE));
+	msleep(20);
+	while (irda_read(aup, IR_STATUS) & (IR_RX_STATUS | IR_TX_STATUS)) {
+		msleep(20);
+		if (!timeout--) {
+			printk(KERN_ERR "%s: rx/tx disable timeout\n",
+					dev->name);
+			break;
+		}
+	}
 
-	/* The only value we must override it the baudrate */
-	aup->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
-		IR_115200|IR_576000 |(IR_4000000 << 8);
-	
-	aup->qos.min_turn_time.bits = qos_mtt_bits;
-	irda_qos_bits_to_value(&aup->qos);
+	/* disable DMA */
+	irda_write(aup, IR_CONFIG_1,
+		   irda_read(aup, IR_CONFIG_1) & ~IR_DMA_ENABLE);
+	msleep(20);
 
-	retval = -ENOMEM;
+	/* After we disable tx/rx. the index pointers go back to zero. */
+	aup->tx_head = aup->tx_tail = aup->rx_head = 0;
+	for (i = 0; i < NUM_IR_DESC; i++) {
+		ptxd = aup->tx_ring[i];
+		ptxd->flags = 0;
+		ptxd->count_0 = 0;
+		ptxd->count_1 = 0;
+	}
 
-	/* Tx ring follows rx ring + 512 bytes */
-	/* we need a 1k aligned buffer */
-	aup->rx_ring[0] = (ring_dest_t *)
-		dma_alloc(2*MAX_NUM_IR_DESC*(sizeof(ring_dest_t)), &temp);
-	if (!aup->rx_ring[0])
-		goto out2;
+	for (i = 0; i < NUM_IR_DESC; i++) {
+		ptxd = aup->rx_ring[i];
+		ptxd->count_0 = 0;
+		ptxd->count_1 = 0;
+		ptxd->flags = AU_OWN;
+	}
 
-	/* allocate the data buffers */
-	aup->db[0].vaddr = 
-		(void *)dma_alloc(MAX_BUF_SIZE * 2*NUM_IR_DESC, &temp);
-	if (!aup->db[0].vaddr)
-		goto out3;
+	if (speed == 4000000)
+		au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_FIR);
+	else
+		au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_SIR);
 
-	setup_hw_rings(aup, (u32)aup->rx_ring[0], (u32)aup->rx_ring[0] + 512);
+	switch (speed) {
+	case 9600:
+		irda_write(aup, IR_WRITE_PHY_CONFIG, IR_BR(11) | IR_PW(12));
+		irda_write(aup, IR_CONFIG_1, IR_SIR_MODE);
+		break;
+	case 19200:
+		irda_write(aup, IR_WRITE_PHY_CONFIG, IR_BR(5) | IR_PW(12));
+		irda_write(aup, IR_CONFIG_1, IR_SIR_MODE);
+		break;
+	case 38400:
+		irda_write(aup, IR_WRITE_PHY_CONFIG, IR_BR(2) | IR_PW(12));
+		irda_write(aup, IR_CONFIG_1, IR_SIR_MODE);
+		break;
+	case 57600:
+		irda_write(aup, IR_WRITE_PHY_CONFIG, IR_BR(1) | IR_PW(12));
+		irda_write(aup, IR_CONFIG_1, IR_SIR_MODE);
+		break;
+	case 115200:
+		irda_write(aup, IR_WRITE_PHY_CONFIG, IR_PW(12));
+		irda_write(aup, IR_CONFIG_1, IR_SIR_MODE);
+		break;
+	case 4000000:
+		irda_write(aup, IR_WRITE_PHY_CONFIG, IR_P(15));
+		irda_write(aup, IR_CONFIG_1, IR_FIR | IR_DMA_ENABLE |
+				IR_RX_ENABLE);
+		break;
+	default:
+		printk(KERN_ERR "%s unsupported speed %x\n", dev->name, speed);
+		ret = -EINVAL;
+		break;
+	}
 
-	pDBfree = NULL;
-	pDB = aup->db;
-	for (i=0; i<(2*NUM_IR_DESC); i++) {
-		pDB->pnext = pDBfree;
-		pDBfree = pDB;
-		pDB->vaddr = 
-			(u32 *)((unsigned)aup->db[0].vaddr + MAX_BUF_SIZE*i);
-		pDB->dma_addr = (dma_addr_t)virt_to_bus(pDB->vaddr);
-		pDB++;
+	aup->speed = speed;
+	irda_write(aup, IR_STATUS, irda_read(aup, IR_STATUS) | IR_PHYEN);
+
+	control = irda_read(aup, IR_STATUS);
+	irda_write(aup, IR_RING_PROMPT, 0);
+
+	if (control & (1 << 14)) {
+		printk(KERN_ERR "%s: configuration error\n", dev->name);
+	} else {
+		if (control & (1 << 11))
+			printk(KERN_DEBUG "%s Valid SIR config\n", dev->name);
+		if (control & (1 << 12))
+			printk(KERN_DEBUG "%s Valid MIR config\n", dev->name);
+		if (control & (1 << 13))
+			printk(KERN_DEBUG "%s Valid FIR config\n", dev->name);
+		if (control & (1 << 10))
+			printk(KERN_DEBUG "%s TX enabled\n", dev->name);
+		if (control & (1 << 9))
+			printk(KERN_DEBUG "%s RX enabled\n", dev->name);
 	}
-	aup->pDBfree = pDBfree;
 
-	/* attach a data buffer to each descriptor */
-	for (i=0; i<NUM_IR_DESC; i++) {
-		pDB = GetFreeDB(aup);
-		if (!pDB) goto out;
-		aup->rx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff);
-		aup->rx_ring[i]->addr_1 = (u8)((pDB->dma_addr>>8) & 0xff);
-		aup->rx_ring[i]->addr_2 = (u8)((pDB->dma_addr>>16) & 0xff);
-		aup->rx_ring[i]->addr_3 = (u8)((pDB->dma_addr>>24) & 0xff);
-		aup->rx_db_inuse[i] = pDB;
+	return ret;
+}
+
+static void update_rx_stats(struct net_device *dev, u32 status, u32 count)
+{
+	struct net_device_stats *ps = &dev->stats;
+
+	ps->rx_packets++;
+
+	if (status & IR_RX_ERROR) {
+		ps->rx_errors++;
+		if (status & (IR_PHY_ERROR | IR_FIFO_OVER))
+			ps->rx_missed_errors++;
+		if (status & IR_MAX_LEN)
+			ps->rx_length_errors++;
+		if (status & IR_CRC_ERROR)
+			ps->rx_crc_errors++;
+	} else
+		ps->rx_bytes += count;
+}
+
+static void update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len)
+{
+	struct net_device_stats *ps = &dev->stats;
+
+	ps->tx_packets++;
+	ps->tx_bytes += pkt_len;
+
+	if (status & IR_TX_ERROR) {
+		ps->tx_errors++;
+		ps->tx_aborted_errors++;
 	}
-	for (i=0; i<NUM_IR_DESC; i++) {
-		pDB = GetFreeDB(aup);
-		if (!pDB) goto out;
-		aup->tx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff);
-		aup->tx_ring[i]->addr_1 = (u8)((pDB->dma_addr>>8) & 0xff);
-		aup->tx_ring[i]->addr_2 = (u8)((pDB->dma_addr>>16) & 0xff);
-		aup->tx_ring[i]->addr_3 = (u8)((pDB->dma_addr>>24) & 0xff);
-		aup->tx_ring[i]->count_0 = 0;
-		aup->tx_ring[i]->count_1 = 0;
-		aup->tx_ring[i]->flags = 0;
-		aup->tx_db_inuse[i] = pDB;
+}
+
+static void au1k_tx_ack(struct net_device *dev)
+{
+	struct au1k_private *aup = netdev_priv(dev);
+	volatile struct ring_dest *ptxd;
+
+	ptxd = aup->tx_ring[aup->tx_tail];
+	while (!(ptxd->flags & AU_OWN) && (aup->tx_tail != aup->tx_head)) {
+		update_tx_stats(dev, ptxd->flags,
+				(ptxd->count_1 << 8) | ptxd->count_0);
+		ptxd->count_0 = 0;
+		ptxd->count_1 = 0;
+		wmb();
+		aup->tx_tail = (aup->tx_tail + 1) & (NUM_IR_DESC - 1);
+		ptxd = aup->tx_ring[aup->tx_tail];
+
+		if (aup->tx_full) {
+			aup->tx_full = 0;
+			netif_wake_queue(dev);
+		}
 	}
 
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-	/* power on */
-	bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
-			      BCSR_RESETS_IRDA_MODE_FULL);
-#endif
+	if (aup->tx_tail == aup->tx_head) {
+		if (aup->newspeed) {
+			au1k_irda_set_speed(dev, aup->newspeed);
+			aup->newspeed = 0;
+		} else {
+			irda_write(aup, IR_CONFIG_1,
+			    irda_read(aup, IR_CONFIG_1) & ~IR_TX_ENABLE);
+			irda_write(aup, IR_CONFIG_1,
+			    irda_read(aup, IR_CONFIG_1) | IR_RX_ENABLE);
+			irda_write(aup, IR_RING_PROMPT, 0);
+		}
+	}
+}
 
-	return 0;
+static int au1k_irda_rx(struct net_device *dev)
+{
+	struct au1k_private *aup = netdev_priv(dev);
+	volatile struct ring_dest *prxd;
+	struct sk_buff *skb;
+	struct db_dest *pDB;
+	u32 flags, count;
 
-out3:
-	dma_free((void *)aup->rx_ring[0],
-		2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t)));
-out2:
-	kfree(aup->rx_buff.head);
-out1:
-	printk(KERN_ERR "au1k_init_module failed.  Returns %d\n", retval);
-	return retval;
+	prxd = aup->rx_ring[aup->rx_head];
+	flags = prxd->flags;
+
+	while (!(flags & AU_OWN))  {
+		pDB = aup->rx_db_inuse[aup->rx_head];
+		count = (prxd->count_1 << 8) | prxd->count_0;
+		if (!(flags & IR_RX_ERROR)) {
+			/* good frame */
+			update_rx_stats(dev, flags, count);
+			skb = alloc_skb(count + 1, GFP_ATOMIC);
+			if (skb == NULL) {
+				dev->stats.rx_dropped++;
+				continue;
+			}
+			skb_reserve(skb, 1);
+			if (aup->speed == 4000000)
+				skb_put(skb, count);
+			else
+				skb_put(skb, count - 2);
+			skb_copy_to_linear_data(skb, (void *)pDB->vaddr,
+						count - 2);
+			skb->dev = dev;
+			skb_reset_mac_header(skb);
+			skb->protocol = htons(ETH_P_IRDA);
+			netif_rx(skb);
+			prxd->count_0 = 0;
+			prxd->count_1 = 0;
+		}
+		prxd->flags |= AU_OWN;
+		aup->rx_head = (aup->rx_head + 1) & (NUM_IR_DESC - 1);
+		irda_write(aup, IR_RING_PROMPT, 0);
+
+		/* next descriptor */
+		prxd = aup->rx_ring[aup->rx_head];
+		flags = prxd->flags;
+
+	}
+	return 0;
 }
 
+static irqreturn_t au1k_irda_interrupt(int dummy, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct au1k_private *aup = netdev_priv(dev);
+
+	irda_write(aup, IR_INT_CLEAR, 0); /* ack irda interrupts */
+
+	au1k_irda_rx(dev);
+	au1k_tx_ack(dev);
+
+	return IRQ_HANDLED;
+}
 
 static int au1k_init(struct net_device *dev)
 {
 	struct au1k_private *aup = netdev_priv(dev);
+	u32 enable, ring_address;
 	int i;
-	u32 control;
-	u32 ring_address;
 
-	/* bring the device out of reset */
-	control = 0xe; /* coherent, clock enable, one half system clock */
-			  
+	enable = IR_HC | IR_CE | IR_C;
 #ifndef CONFIG_CPU_LITTLE_ENDIAN
-	control |= 1;
+	enable |= IR_BE;
 #endif
 	aup->tx_head = 0;
 	aup->tx_tail = 0;
 	aup->rx_head = 0;
 
-	for (i=0; i<NUM_IR_DESC; i++) {
+	for (i = 0; i < NUM_IR_DESC; i++)
 		aup->rx_ring[i]->flags = AU_OWN;
-	}
 
-	writel(control, IR_INTERFACE_CONFIG);
-	au_sync_delay(10);
+	irda_write(aup, IR_ENABLE, enable);
+	msleep(20);
 
-	writel(read_ir_reg(IR_ENABLE) & ~0x8000, IR_ENABLE); /* disable PHY */
-	au_sync_delay(1);
+	/* disable PHY */
+	au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_OFF);
+	irda_write(aup, IR_STATUS, irda_read(aup, IR_STATUS) & ~IR_PHYEN);
+	msleep(20);
 
-	writel(MAX_BUF_SIZE, IR_MAX_PKT_LEN);
+	irda_write(aup, IR_MAX_PKT_LEN, MAX_BUF_SIZE);
 
 	ring_address = (u32)virt_to_phys((void *)aup->rx_ring[0]);
-	writel(ring_address >> 26, IR_RING_BASE_ADDR_H);
-	writel((ring_address >> 10) & 0xffff, IR_RING_BASE_ADDR_L);
+	irda_write(aup, IR_RING_BASE_ADDR_H, ring_address >> 26);
+	irda_write(aup, IR_RING_BASE_ADDR_L, (ring_address >> 10) & 0xffff);
 
-	writel(RING_SIZE_64<<8 | RING_SIZE_64<<12, IR_RING_SIZE);
+	irda_write(aup, IR_RING_SIZE,
+				(RING_SIZE_64 << 8) | (RING_SIZE_64 << 12));
 
-	writel(1<<2 | IR_ONE_PIN, IR_CONFIG_2); /* 48MHz */
-	writel(0, IR_RING_ADDR_CMPR);
+	irda_write(aup, IR_CONFIG_2, IR_PHYCLK_48MHZ | IR_ONE_PIN);
+	irda_write(aup, IR_RING_ADDR_CMPR, 0);
 
 	au1k_irda_set_speed(dev, 9600);
 	return 0;
@@ -340,25 +555,28 @@ static int au1k_init(struct net_device *dev)
 
 static int au1k_irda_start(struct net_device *dev)
 {
-	int retval;
-	char hwname[32];
 	struct au1k_private *aup = netdev_priv(dev);
+	char hwname[32];
+	int retval;
 
-	if ((retval = au1k_init(dev))) {
+	retval = au1k_init(dev);
+	if (retval) {
 		printk(KERN_ERR "%s: error in au1k_init\n", dev->name);
 		return retval;
 	}
 
-	if ((retval = request_irq(AU1000_IRDA_TX_INT, au1k_irda_interrupt, 
-					0, dev->name, dev))) {
-		printk(KERN_ERR "%s: unable to get IRQ %d\n", 
+	retval = request_irq(aup->irq_tx, &au1k_irda_interrupt, 0,
+			     dev->name, dev);
+	if (retval) {
+		printk(KERN_ERR "%s: unable to get IRQ %d\n",
 				dev->name, dev->irq);
 		return retval;
 	}
-	if ((retval = request_irq(AU1000_IRDA_RX_INT, au1k_irda_interrupt, 
-					0, dev->name, dev))) {
-		free_irq(AU1000_IRDA_TX_INT, dev);
-		printk(KERN_ERR "%s: unable to get IRQ %d\n", 
+	retval = request_irq(aup->irq_rx, &au1k_irda_interrupt, 0,
+			     dev->name, dev);
+	if (retval) {
+		free_irq(aup->irq_tx, dev);
+		printk(KERN_ERR "%s: unable to get IRQ %d\n",
 				dev->name, dev->irq);
 		return retval;
 	}
@@ -368,9 +586,13 @@ static int au1k_irda_start(struct net_device *dev)
 	aup->irlap = irlap_open(dev, &aup->qos, hwname);
 	netif_start_queue(dev);
 
-	writel(read_ir_reg(IR_CONFIG_2) | 1<<8, IR_CONFIG_2); /* int enable */
+	/* int enable */
+	irda_write(aup, IR_CONFIG_2, irda_read(aup, IR_CONFIG_2) | IR_IEN);
+
+	/* power up */
+	au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_SIR);
 
-	aup->timer.expires = RUN_AT((3*HZ)); 
+	aup->timer.expires = RUN_AT((3 * HZ));
 	aup->timer.data = (unsigned long)dev;
 	return 0;
 }
@@ -379,11 +601,12 @@ static int au1k_irda_stop(struct net_device *dev)
 {
 	struct au1k_private *aup = netdev_priv(dev);
 
+	au1k_irda_plat_set_phy_mode(aup, AU1000_IRDA_PHY_MODE_OFF);
+
 	/* disable interrupts */
-	writel(read_ir_reg(IR_CONFIG_2) & ~(1<<8), IR_CONFIG_2);
-	writel(0, IR_CONFIG_1); 
-	writel(0, IR_INTERFACE_CONFIG); /* disable clock */
-	au_sync();
+	irda_write(aup, IR_CONFIG_2, irda_read(aup, IR_CONFIG_2) & ~IR_IEN);
+	irda_write(aup, IR_CONFIG_1, 0);
+	irda_write(aup, IR_ENABLE, 0); /* disable clock */
 
 	if (aup->irlap) {
 		irlap_close(aup->irlap);
@@ -394,83 +617,12 @@ static int au1k_irda_stop(struct net_device *dev)
 	del_timer(&aup->timer);
 
 	/* disable the interrupt */
-	free_irq(AU1000_IRDA_TX_INT, dev);
-	free_irq(AU1000_IRDA_RX_INT, dev);
-	return 0;
-}
-
-static void __exit au1k_irda_exit(void)
-{
-	struct net_device *dev = ir_devs[0];
-	struct au1k_private *aup = netdev_priv(dev);
+	free_irq(aup->irq_tx, dev);
+	free_irq(aup->irq_rx, dev);
 
-	unregister_netdev(dev);
-
-	dma_free((void *)aup->db[0].vaddr,
-		MAX_BUF_SIZE * 2*NUM_IR_DESC);
-	dma_free((void *)aup->rx_ring[0],
-		2 * MAX_NUM_IR_DESC*(sizeof(ring_dest_t)));
-	kfree(aup->rx_buff.head);
-	free_netdev(dev);
-}
-
-
-static inline void 
-update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len)
-{
-	struct au1k_private *aup = netdev_priv(dev);
-	struct net_device_stats *ps = &aup->stats;
-
-	ps->tx_packets++;
-	ps->tx_bytes += pkt_len;
-
-	if (status & IR_TX_ERROR) {
-		ps->tx_errors++;
-		ps->tx_aborted_errors++;
-	}
-}
-
-
-static void au1k_tx_ack(struct net_device *dev)
-{
-	struct au1k_private *aup = netdev_priv(dev);
-	volatile ring_dest_t *ptxd;
-
-	ptxd = aup->tx_ring[aup->tx_tail];
-	while (!(ptxd->flags & AU_OWN) && (aup->tx_tail != aup->tx_head)) {
-		update_tx_stats(dev, ptxd->flags, 
-				ptxd->count_1<<8 | ptxd->count_0);
-		ptxd->count_0 = 0;
-		ptxd->count_1 = 0;
-		au_sync();
-
-		aup->tx_tail = (aup->tx_tail + 1) & (NUM_IR_DESC - 1);
-		ptxd = aup->tx_ring[aup->tx_tail];
-
-		if (aup->tx_full) {
-			aup->tx_full = 0;
-			netif_wake_queue(dev);
-		}
-	}
-
-	if (aup->tx_tail == aup->tx_head) {
-		if (aup->newspeed) {
-			au1k_irda_set_speed(dev, aup->newspeed);
-			aup->newspeed = 0;
-		}
-		else {
-			writel(read_ir_reg(IR_CONFIG_1) & ~IR_TX_ENABLE, 
-					IR_CONFIG_1); 
-			au_sync();
-			writel(read_ir_reg(IR_CONFIG_1) | IR_RX_ENABLE, 
-					IR_CONFIG_1); 
-			writel(0, IR_RING_PROMPT);
-			au_sync();
-		}
-	}
+	return 0;
 }
 
-
 /*
  * Au1000 transmit routine.
  */
@@ -478,15 +630,12 @@ static int au1k_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct au1k_private *aup = netdev_priv(dev);
 	int speed = irda_get_next_speed(skb);
-	volatile ring_dest_t *ptxd;
-	u32 len;
-
-	u32 flags;
-	db_dest_t *pDB;
+	volatile struct ring_dest *ptxd;
+	struct db_dest *pDB;
+	u32 len, flags;
 
-	if (speed != aup->speed && speed != -1) {
+	if (speed != aup->speed && speed != -1)
 		aup->newspeed = speed;
-	}
 
 	if ((skb->len == 0) && (aup->newspeed)) {
 		if (aup->tx_tail == aup->tx_head) {
@@ -504,138 +653,47 @@ static int au1k_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 		printk(KERN_DEBUG "%s: tx_full\n", dev->name);
 		netif_stop_queue(dev);
 		aup->tx_full = 1;
-		return NETDEV_TX_BUSY;
-	}
-	else if (((aup->tx_head + 1) & (NUM_IR_DESC - 1)) == aup->tx_tail) {
+		return 1;
+	} else if (((aup->tx_head + 1) & (NUM_IR_DESC - 1)) == aup->tx_tail) {
 		printk(KERN_DEBUG "%s: tx_full\n", dev->name);
 		netif_stop_queue(dev);
 		aup->tx_full = 1;
-		return NETDEV_TX_BUSY;
+		return 1;
 	}
 
 	pDB = aup->tx_db_inuse[aup->tx_head];
 
 #if 0
-	if (read_ir_reg(IR_RX_BYTE_CNT) != 0) {
-		printk("tx warning: rx byte cnt %x\n", 
-				read_ir_reg(IR_RX_BYTE_CNT));
+	if (irda_read(aup, IR_RX_BYTE_CNT) != 0) {
+		printk(KERN_DEBUG "tx warning: rx byte cnt %x\n",
+				irda_read(aup, IR_RX_BYTE_CNT));
 	}
 #endif
-	
+
 	if (aup->speed == 4000000) {
 		/* FIR */
-		skb_copy_from_linear_data(skb, pDB->vaddr, skb->len);
+		skb_copy_from_linear_data(skb, (void *)pDB->vaddr, skb->len);
 		ptxd->count_0 = skb->len & 0xff;
 		ptxd->count_1 = (skb->len >> 8) & 0xff;
-
-	}
-	else {
+	} else {
 		/* SIR */
 		len = async_wrap_skb(skb, (u8 *)pDB->vaddr, MAX_BUF_SIZE);
 		ptxd->count_0 = len & 0xff;
 		ptxd->count_1 = (len >> 8) & 0xff;
 		ptxd->flags |= IR_DIS_CRC;
-		au_writel(au_readl(0xae00000c) & ~(1<<13), 0xae00000c);
 	}
 	ptxd->flags |= AU_OWN;
-	au_sync();
+	wmb();
 
-	writel(read_ir_reg(IR_CONFIG_1) | IR_TX_ENABLE, IR_CONFIG_1); 
-	writel(0, IR_RING_PROMPT);
-	au_sync();
+	irda_write(aup, IR_CONFIG_1,
+		   irda_read(aup, IR_CONFIG_1) | IR_TX_ENABLE);
+	irda_write(aup, IR_RING_PROMPT, 0);
 
 	dev_kfree_skb(skb);
 	aup->tx_head = (aup->tx_head + 1) & (NUM_IR_DESC - 1);
 	return NETDEV_TX_OK;
 }
 
-
-static inline void 
-update_rx_stats(struct net_device *dev, u32 status, u32 count)
-{
-	struct au1k_private *aup = netdev_priv(dev);
-	struct net_device_stats *ps = &aup->stats;
-
-	ps->rx_packets++;
-
-	if (status & IR_RX_ERROR) {
-		ps->rx_errors++;
-		if (status & (IR_PHY_ERROR|IR_FIFO_OVER))
-			ps->rx_missed_errors++;
-		if (status & IR_MAX_LEN)
-			ps->rx_length_errors++;
-		if (status & IR_CRC_ERROR)
-			ps->rx_crc_errors++;
-	}
-	else 
-		ps->rx_bytes += count;
-}
-
-/*
- * Au1000 receive routine.
- */
-static int au1k_irda_rx(struct net_device *dev)
-{
-	struct au1k_private *aup = netdev_priv(dev);
-	struct sk_buff *skb;
-	volatile ring_dest_t *prxd;
-	u32 flags, count;
-	db_dest_t *pDB;
-
-	prxd = aup->rx_ring[aup->rx_head];
-	flags = prxd->flags;
-
-	while (!(flags & AU_OWN))  {
-		pDB = aup->rx_db_inuse[aup->rx_head];
-		count = prxd->count_1<<8 | prxd->count_0;
-		if (!(flags & IR_RX_ERROR))  {
-			/* good frame */
-			update_rx_stats(dev, flags, count);
-			skb=alloc_skb(count+1,GFP_ATOMIC);
-			if (skb == NULL) {
-				aup->netdev->stats.rx_dropped++;
-				continue;
-			}
-			skb_reserve(skb, 1);
-			if (aup->speed == 4000000)
-				skb_put(skb, count);
-			else
-				skb_put(skb, count-2);
-			skb_copy_to_linear_data(skb, pDB->vaddr, count - 2);
-			skb->dev = dev;
-			skb_reset_mac_header(skb);
-			skb->protocol = htons(ETH_P_IRDA);
-			netif_rx(skb);
-			prxd->count_0 = 0;
-			prxd->count_1 = 0;
-		}
-		prxd->flags |= AU_OWN;
-		aup->rx_head = (aup->rx_head + 1) & (NUM_IR_DESC - 1);
-		writel(0, IR_RING_PROMPT);
-		au_sync();
-
-		/* next descriptor */
-		prxd = aup->rx_ring[aup->rx_head];
-		flags = prxd->flags;
-
-	}
-	return 0;
-}
-
-
-static irqreturn_t au1k_irda_interrupt(int dummy, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-
-	writel(0, IR_INT_CLEAR); /* ack irda interrupts */
-
-	au1k_irda_rx(dev);
-	au1k_tx_ack(dev);
-
-	return IRQ_HANDLED;
-}
-
-
 /*
  * The Tx ring has been full longer than the watchdog timeout
  * value. The transmitter must be hung?
@@ -653,142 +711,7 @@ static void au1k_tx_timeout(struct net_device *dev)
 	netif_wake_queue(dev);
 }
 
-
-/*
- * Set the IrDA communications speed.
- */
-static int 
-au1k_irda_set_speed(struct net_device *dev, int speed)
-{
-	unsigned long flags;
-	struct au1k_private *aup = netdev_priv(dev);
-	u32 control;
-	int ret = 0, timeout = 10, i;
-	volatile ring_dest_t *ptxd;
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-	unsigned long irda_resets;
-#endif
-
-	if (speed == aup->speed)
-		return ret;
-
-	spin_lock_irqsave(&ir_lock, flags);
-
-	/* disable PHY first */
-	writel(read_ir_reg(IR_ENABLE) & ~0x8000, IR_ENABLE);
-
-	/* disable RX/TX */
-	writel(read_ir_reg(IR_CONFIG_1) & ~(IR_RX_ENABLE|IR_TX_ENABLE), 
-			IR_CONFIG_1);
-	au_sync_delay(1);
-	while (read_ir_reg(IR_ENABLE) & (IR_RX_STATUS | IR_TX_STATUS)) {
-		mdelay(1);
-		if (!timeout--) {
-			printk(KERN_ERR "%s: rx/tx disable timeout\n",
-					dev->name);
-			break;
-		}
-	}
-
-	/* disable DMA */
-	writel(read_ir_reg(IR_CONFIG_1) & ~IR_DMA_ENABLE, IR_CONFIG_1);
-	au_sync_delay(1);
-
-	/* 
-	 *  After we disable tx/rx. the index pointers
- 	 * go back to zero.
-	 */
-	aup->tx_head = aup->tx_tail = aup->rx_head = 0;
-	for (i=0; i<NUM_IR_DESC; i++) {
-		ptxd = aup->tx_ring[i];
-		ptxd->flags = 0;
-		ptxd->count_0 = 0;
-		ptxd->count_1 = 0;
-	}
-
-	for (i=0; i<NUM_IR_DESC; i++) {
-		ptxd = aup->rx_ring[i];
-		ptxd->count_0 = 0;
-		ptxd->count_1 = 0;
-		ptxd->flags = AU_OWN;
-	}
-
-	if (speed == 4000000) {
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_FIR_SEL);
-#else /* Pb1000 and Pb1100 */
-		writel(1<<13, CPLD_AUX1);
-#endif
-	}
-	else {
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-		bcsr_mod(BCSR_RESETS, BCSR_RESETS_FIR_SEL, 0);
-#else /* Pb1000 and Pb1100 */
-		writel(readl(CPLD_AUX1) & ~(1<<13), CPLD_AUX1);
-#endif
-	}
-
-	switch (speed) {
-	case 9600:	
-		writel(11<<10 | 12<<5, IR_WRITE_PHY_CONFIG); 
-		writel(IR_SIR_MODE, IR_CONFIG_1); 
-		break;
-	case 19200:	
-		writel(5<<10 | 12<<5, IR_WRITE_PHY_CONFIG); 
-		writel(IR_SIR_MODE, IR_CONFIG_1); 
-		break;
-	case 38400:
-		writel(2<<10 | 12<<5, IR_WRITE_PHY_CONFIG); 
-		writel(IR_SIR_MODE, IR_CONFIG_1); 
-		break;
-	case 57600:	
-		writel(1<<10 | 12<<5, IR_WRITE_PHY_CONFIG); 
-		writel(IR_SIR_MODE, IR_CONFIG_1); 
-		break;
-	case 115200: 
-		writel(12<<5, IR_WRITE_PHY_CONFIG); 
-		writel(IR_SIR_MODE, IR_CONFIG_1); 
-		break;
-	case 4000000:
-		writel(0xF, IR_WRITE_PHY_CONFIG);
-		writel(IR_FIR|IR_DMA_ENABLE|IR_RX_ENABLE, IR_CONFIG_1); 
-		break;
-	default:
-		printk(KERN_ERR "%s unsupported speed %x\n", dev->name, speed);
-		ret = -EINVAL;
-		break;
-	}
-
-	aup->speed = speed;
-	writel(read_ir_reg(IR_ENABLE) | 0x8000, IR_ENABLE);
-	au_sync();
-
-	control = read_ir_reg(IR_ENABLE);
-	writel(0, IR_RING_PROMPT);
-	au_sync();
-
-	if (control & (1<<14)) {
-		printk(KERN_ERR "%s: configuration error\n", dev->name);
-	}
-	else {
-		if (control & (1<<11))
-			printk(KERN_DEBUG "%s Valid SIR config\n", dev->name);
-		if (control & (1<<12))
-			printk(KERN_DEBUG "%s Valid MIR config\n", dev->name);
-		if (control & (1<<13))
-			printk(KERN_DEBUG "%s Valid FIR config\n", dev->name);
-		if (control & (1<<10))
-			printk(KERN_DEBUG "%s TX enabled\n", dev->name);
-		if (control & (1<<9))
-			printk(KERN_DEBUG "%s RX enabled\n", dev->name);
-	}
-
-	spin_unlock_irqrestore(&ir_lock, flags);
-	return ret;
-}
-
-static int 
-au1k_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
+static int au1k_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
 {
 	struct if_irda_req *rq = (struct if_irda_req *)ifreq;
 	struct au1k_private *aup = netdev_priv(dev);
@@ -829,8 +752,218 @@ au1k_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
 	return ret;
 }
 
+static const struct net_device_ops au1k_irda_netdev_ops = {
+	.ndo_open		= au1k_irda_start,
+	.ndo_stop		= au1k_irda_stop,
+	.ndo_start_xmit		= au1k_irda_hard_xmit,
+	.ndo_tx_timeout		= au1k_tx_timeout,
+	.ndo_do_ioctl		= au1k_irda_ioctl,
+};
+
+static int __devinit au1k_irda_net_init(struct net_device *dev)
+{
+	struct au1k_private *aup = netdev_priv(dev);
+	struct db_dest *pDB, *pDBfree;
+	int i, err, retval = 0;
+	dma_addr_t temp;
+
+	err = au1k_irda_init_iobuf(&aup->rx_buff, 14384);
+	if (err)
+		goto out1;
+
+	dev->netdev_ops = &au1k_irda_netdev_ops;
+
+	irda_init_max_qos_capabilies(&aup->qos);
+
+	/* The only value we must override it the baudrate */
+	aup->qos.baud_rate.bits = IR_9600 | IR_19200 | IR_38400 |
+		IR_57600 | IR_115200 | IR_576000 | (IR_4000000 << 8);
+
+	aup->qos.min_turn_time.bits = qos_mtt_bits;
+	irda_qos_bits_to_value(&aup->qos);
+
+	retval = -ENOMEM;
+
+	/* Tx ring follows rx ring + 512 bytes */
+	/* we need a 1k aligned buffer */
+	aup->rx_ring[0] = (struct ring_dest *)
+		dma_alloc(2 * MAX_NUM_IR_DESC * (sizeof(struct ring_dest)),
+			  &temp);
+	if (!aup->rx_ring[0])
+		goto out2;
+
+	/* allocate the data buffers */
+	aup->db[0].vaddr =
+		(void *)dma_alloc(MAX_BUF_SIZE * 2 * NUM_IR_DESC, &temp);
+	if (!aup->db[0].vaddr)
+		goto out3;
+
+	setup_hw_rings(aup, (u32)aup->rx_ring[0], (u32)aup->rx_ring[0] + 512);
+
+	pDBfree = NULL;
+	pDB = aup->db;
+	for (i = 0; i < (2 * NUM_IR_DESC); i++) {
+		pDB->pnext = pDBfree;
+		pDBfree = pDB;
+		pDB->vaddr =
+		       (u32 *)((unsigned)aup->db[0].vaddr + (MAX_BUF_SIZE * i));
+		pDB->dma_addr = (dma_addr_t)virt_to_bus(pDB->vaddr);
+		pDB++;
+	}
+	aup->pDBfree = pDBfree;
+
+	/* attach a data buffer to each descriptor */
+	for (i = 0; i < NUM_IR_DESC; i++) {
+		pDB = GetFreeDB(aup);
+		if (!pDB)
+			goto out3;
+		aup->rx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff);
+		aup->rx_ring[i]->addr_1 = (u8)((pDB->dma_addr >>  8) & 0xff);
+		aup->rx_ring[i]->addr_2 = (u8)((pDB->dma_addr >> 16) & 0xff);
+		aup->rx_ring[i]->addr_3 = (u8)((pDB->dma_addr >> 24) & 0xff);
+		aup->rx_db_inuse[i] = pDB;
+	}
+	for (i = 0; i < NUM_IR_DESC; i++) {
+		pDB = GetFreeDB(aup);
+		if (!pDB)
+			goto out3;
+		aup->tx_ring[i]->addr_0 = (u8)(pDB->dma_addr & 0xff);
+		aup->tx_ring[i]->addr_1 = (u8)((pDB->dma_addr >>  8) & 0xff);
+		aup->tx_ring[i]->addr_2 = (u8)((pDB->dma_addr >> 16) & 0xff);
+		aup->tx_ring[i]->addr_3 = (u8)((pDB->dma_addr >> 24) & 0xff);
+		aup->tx_ring[i]->count_0 = 0;
+		aup->tx_ring[i]->count_1 = 0;
+		aup->tx_ring[i]->flags = 0;
+		aup->tx_db_inuse[i] = pDB;
+	}
+
+	return 0;
+
+out3:
+	dma_free((void *)aup->rx_ring[0],
+		2 * MAX_NUM_IR_DESC * (sizeof(struct ring_dest)));
+out2:
+	kfree(aup->rx_buff.head);
+out1:
+	printk(KERN_ERR "au1k_irda_net_init() failed.  Returns %d\n", retval);
+	return retval;
+}
+
+static int __devinit au1k_irda_probe(struct platform_device *pdev)
+{
+	struct au1k_private *aup;
+	struct net_device *dev;
+	struct resource *r;
+	int err;
+
+	dev = alloc_irdadev(sizeof(struct au1k_private));
+	if (!dev)
+		return -ENOMEM;
+
+	aup = netdev_priv(dev);
+
+	aup->platdata = pdev->dev.platform_data;
+
+	err = -EINVAL;
+	r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!r)
+		goto out;
+
+	aup->irq_tx = r->start;
+
+	r = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+	if (!r)
+		goto out;
+
+	aup->irq_rx = r->start;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r)
+		goto out;
+
+	err = -EBUSY;
+	aup->ioarea = request_mem_region(r->start, r->end - r->start + 1,
+					 pdev->name);
+	if (!aup->ioarea)
+		goto out;
+
+	aup->iobase = ioremap_nocache(r->start, r->end - r->start + 1);
+	if (!aup->iobase)
+		goto out2;
+
+	dev->irq = aup->irq_rx;
+
+	err = au1k_irda_net_init(dev);
+	if (err)
+		goto out3;
+	err = register_netdev(dev);
+	if (err)
+		goto out4;
+
+	platform_set_drvdata(pdev, dev);
+
+	printk(KERN_INFO "IrDA: Registered device %s\n", dev->name);
+	return 0;
+
+out4:
+	dma_free((void *)aup->db[0].vaddr,
+		MAX_BUF_SIZE * 2 * NUM_IR_DESC);
+	dma_free((void *)aup->rx_ring[0],
+		2 * MAX_NUM_IR_DESC * (sizeof(struct ring_dest)));
+	kfree(aup->rx_buff.head);
+out3:
+	iounmap(aup->iobase);
+out2:
+	release_resource(aup->ioarea);
+	kfree(aup->ioarea);
+out:
+	free_netdev(dev);
+	return err;
+}
+
+static int __devexit au1k_irda_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct au1k_private *aup = netdev_priv(dev);
+
+	unregister_netdev(dev);
+
+	dma_free((void *)aup->db[0].vaddr,
+		MAX_BUF_SIZE * 2 * NUM_IR_DESC);
+	dma_free((void *)aup->rx_ring[0],
+		2 * MAX_NUM_IR_DESC * (sizeof(struct ring_dest)));
+	kfree(aup->rx_buff.head);
+
+	iounmap(aup->iobase);
+	release_resource(aup->ioarea);
+	kfree(aup->ioarea);
+
+	free_netdev(dev);
+
+	return 0;
+}
+
+static struct platform_driver au1k_irda_driver = {
+	.driver	= {
+		.name	= "au1000-irda",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= au1k_irda_probe,
+	.remove		= __devexit_p(au1k_irda_remove),
+};
+
+static int __init au1k_irda_load(void)
+{
+	return platform_driver_register(&au1k_irda_driver);
+}
+
+static void __exit au1k_irda_unload(void)
+{
+	return platform_driver_unregister(&au1k_irda_driver);
+}
+
 MODULE_AUTHOR("Pete Popov <ppopov@mvista.com>");
 MODULE_DESCRIPTION("Au1000 IrDA Device Driver");
 
-module_init(au1k_irda_init);
-module_exit(au1k_irda_exit);
+module_init(au1k_irda_load);
+module_exit(au1k_irda_unload);
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 6e318ce41136..f9e3fb3a285b 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -155,18 +155,14 @@ config PCMCIA_M8XX
 
 	  This driver is also available as a module called m8xx_pcmcia.
 
-config PCMCIA_AU1X00
-	tristate "Au1x00 pcmcia support"
-	depends on MIPS_ALCHEMY && PCMCIA
-
 config PCMCIA_ALCHEMY_DEVBOARD
 	tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
 	depends on MIPS_ALCHEMY && PCMCIA
 	select 64BIT_PHYS_ADDR
 	help
 	  Enable this driver of you want PCMCIA support on your Alchemy
-	  Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board.
-	  NOT suitable for the PB1000!
+	  Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300
+	  board.  NOT suitable for the PB1000!
 
 	  This driver is also available as a module called db1xxx_ss.ko
 
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 29935ea921df..ec543a4ff2e4 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_PCMCIA_SA1100)			+= sa11xx_base.o sa1100_cs.o
 obj-$(CONFIG_PCMCIA_SA1111)			+= sa11xx_base.o sa1111_cs.o
 obj-$(CONFIG_M32R_PCC)				+= m32r_pcc.o
 obj-$(CONFIG_M32R_CFC)				+= m32r_cfc.o
-obj-$(CONFIG_PCMCIA_AU1X00)			+= au1x00_ss.o
 obj-$(CONFIG_PCMCIA_BCM63XX)			+= bcm63xx_pcmcia.o
 obj-$(CONFIG_PCMCIA_VRC4171)			+= vrc4171_card.o
 obj-$(CONFIG_PCMCIA_VRC4173)			+= vrc4173_cardu.o
@@ -39,9 +38,6 @@ obj-$(CONFIG_AT91_CF)				+= at91_cf.o
 obj-$(CONFIG_ELECTRA_CF)			+= electra_cf.o
 obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD)		+= db1xxx_ss.o
 
-au1x00_ss-y					+= au1000_generic.o
-au1x00_ss-$(CONFIG_MIPS_PB1000)			+= au1000_pb1x00.o
-
 sa1111_cs-y					+= sa1111_generic.o
 sa1111_cs-$(CONFIG_ASSABET_NEPONSET)		+= sa1100_neponset.o
 sa1111_cs-$(CONFIG_SA1100_BADGE4)		+= sa1100_badge4.o
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
deleted file mode 100644
index 95dd7c62741f..000000000000
--- a/drivers/pcmcia/au1000_generic.c
+++ /dev/null
@@ -1,545 +0,0 @@
-/*
- *
- * Alchemy Semi Au1000 pcmcia driver
- *
- * Copyright 2001-2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@embeddedalley.com or source@mvista.com
- *
- * Copyright 2004 Pete Popov, Embedded Alley Solutions, Inc.
- * Updated the driver to 2.6. Followed the sa11xx API and largely
- * copied many of the hardware independent functions.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * 
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/notifier.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include "au1000_generic.h"
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Pete Popov <ppopov@embeddedalley.com>");
-MODULE_DESCRIPTION("Linux PCMCIA Card Services: Au1x00 Socket Controller");
-
-#if 0
-#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
-#else
-#define debug(x,args...)
-#endif
-
-#define MAP_SIZE 0x100000
-extern struct au1000_pcmcia_socket au1000_pcmcia_socket[];
-#define PCMCIA_SOCKET(x)	(au1000_pcmcia_socket + (x))
-#define to_au1000_socket(x)	container_of(x, struct au1000_pcmcia_socket, socket)
-
-/* Some boards like to support CF cards as IDE root devices, so they
- * grab pcmcia sockets directly.
- */
-u32 *pcmcia_base_vaddrs[2];
-extern const unsigned long mips_io_port_base;
-
-static DEFINE_MUTEX(pcmcia_sockets_lock);
-
-static int (*au1x00_pcmcia_hw_init[])(struct device *dev) = {
-	au1x_board_init,
-};
-
-static int
-au1x00_pcmcia_skt_state(struct au1000_pcmcia_socket *skt)
-{
-	struct pcmcia_state state;
-	unsigned int stat;
-
-	memset(&state, 0, sizeof(struct pcmcia_state));
-
-	skt->ops->socket_state(skt, &state);
-
-	stat = state.detect  ? SS_DETECT : 0;
-	stat |= state.ready  ? SS_READY  : 0;
-	stat |= state.wrprot ? SS_WRPROT : 0;
-	stat |= state.vs_3v  ? SS_3VCARD : 0;
-	stat |= state.vs_Xv  ? SS_XVCARD : 0;
-	stat |= skt->cs_state.Vcc ? SS_POWERON : 0;
-
-	if (skt->cs_state.flags & SS_IOCARD)
-		stat |= state.bvd1 ? SS_STSCHG : 0;
-	else {
-		if (state.bvd1 == 0)
-			stat |= SS_BATDEAD;
-		else if (state.bvd2 == 0)
-			stat |= SS_BATWARN;
-	}
-	return stat;
-}
-
-/*
- * au100_pcmcia_config_skt
- *
- * Convert PCMCIA socket state to our socket configure structure.
- */
-static int
-au1x00_pcmcia_config_skt(struct au1000_pcmcia_socket *skt, socket_state_t *state)
-{
-	int ret;
-
-	ret = skt->ops->configure_socket(skt, state);
-	if (ret == 0) {
-		skt->cs_state = *state;
-	}
-
-	if (ret < 0)
-		debug("unable to configure socket %d\n", skt->nr);
-
-	return ret;
-}
-
-/* au1x00_pcmcia_sock_init()
- *
- * (Re-)Initialise the socket, turning on status interrupts
- * and PCMCIA bus.  This must wait for power to stabilise
- * so that the card status signals report correctly.
- *
- * Returns: 0
- */
-static int au1x00_pcmcia_sock_init(struct pcmcia_socket *sock)
-{
-	struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-
-	debug("initializing socket %u\n", skt->nr);
-
-	skt->ops->socket_init(skt);
-	return 0;
-}
-
-/*
- * au1x00_pcmcia_suspend()
- *
- * Remove power on the socket, disable IRQs from the card.
- * Turn off status interrupts, and disable the PCMCIA bus.
- *
- * Returns: 0
- */
-static int au1x00_pcmcia_suspend(struct pcmcia_socket *sock)
-{
-	struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-
-	debug("suspending socket %u\n", skt->nr);
-
-	skt->ops->socket_suspend(skt);
-
-	return 0;
-}
-
-static DEFINE_SPINLOCK(status_lock);
-
-/*
- * au1x00_check_status()
- */
-static void au1x00_check_status(struct au1000_pcmcia_socket *skt)
-{
-	unsigned int events;
-
-	debug("entering PCMCIA monitoring thread\n");
-
-	do {
-		unsigned int status;
-		unsigned long flags;
-
-		status = au1x00_pcmcia_skt_state(skt);
-
-		spin_lock_irqsave(&status_lock, flags);
-		events = (status ^ skt->status) & skt->cs_state.csc_mask;
-		skt->status = status;
-		spin_unlock_irqrestore(&status_lock, flags);
-
-		debug("events: %s%s%s%s%s%s\n",
-			events == 0         ? "<NONE>"   : "",
-			events & SS_DETECT  ? "DETECT "  : "",
-			events & SS_READY   ? "READY "   : "",
-			events & SS_BATDEAD ? "BATDEAD " : "",
-			events & SS_BATWARN ? "BATWARN " : "",
-			events & SS_STSCHG  ? "STSCHG "  : "");
-
-		if (events)
-			pcmcia_parse_events(&skt->socket, events);
-	} while (events);
-}
-
-/* 
- * au1x00_pcmcia_poll_event()
- * Let's poll for events in addition to IRQs since IRQ only is unreliable...
- */
-static void au1x00_pcmcia_poll_event(unsigned long dummy)
-{
-	struct au1000_pcmcia_socket *skt = (struct au1000_pcmcia_socket *)dummy;
-	debug("polling for events\n");
-
-	mod_timer(&skt->poll_timer, jiffies + AU1000_PCMCIA_POLL_PERIOD);
-
-	au1x00_check_status(skt);
-}
-
-/* au1x00_pcmcia_get_status()
- *
- * From the sa11xx_core.c:
- * Implements the get_status() operation for the in-kernel PCMCIA
- * service (formerly SS_GetStatus in Card Services). Essentially just
- * fills in bits in `status' according to internal driver state or
- * the value of the voltage detect chipselect register.
- *
- * As a debugging note, during card startup, the PCMCIA core issues
- * three set_socket() commands in a row the first with RESET deasserted,
- * the second with RESET asserted, and the last with RESET deasserted
- * again. Following the third set_socket(), a get_status() command will
- * be issued. The kernel is looking for the SS_READY flag (see
- * setup_socket(), reset_socket(), and unreset_socket() in cs.c).
- *
- * Returns: 0
- */
-static int
-au1x00_pcmcia_get_status(struct pcmcia_socket *sock, unsigned int *status)
-{
-	struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-
-	skt->status = au1x00_pcmcia_skt_state(skt);
-	*status = skt->status;
-
-	return 0;
-}
-
-/* au1x00_pcmcia_set_socket()
- * Implements the set_socket() operation for the in-kernel PCMCIA
- * service (formerly SS_SetSocket in Card Services). We more or
- * less punt all of this work and let the kernel handle the details
- * of power configuration, reset, &c. We also record the value of
- * `state' in order to regurgitate it to the PCMCIA core later.
- *
- * Returns: 0
- */
-static int
-au1x00_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
-{
-  struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-
-  debug("for sock %u\n", skt->nr);
-
-  debug("\tmask:  %s%s%s%s%s%s\n\tflags: %s%s%s%s%s%s\n",
-	(state->csc_mask==0)?"<NONE>":"",
-	(state->csc_mask&SS_DETECT)?"DETECT ":"",
-	(state->csc_mask&SS_READY)?"READY ":"",
-	(state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
-	(state->csc_mask&SS_BATWARN)?"BATWARN ":"",
-	(state->csc_mask&SS_STSCHG)?"STSCHG ":"",
-	(state->flags==0)?"<NONE>":"",
-	(state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
-	(state->flags&SS_IOCARD)?"IOCARD ":"",
-	(state->flags&SS_RESET)?"RESET ":"",
-	(state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
-	(state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"");
-  debug("\tVcc %d  Vpp %d  irq %d\n",
-	state->Vcc, state->Vpp, state->io_irq);
-
-  return au1x00_pcmcia_config_skt(skt, state);
-}
-
-int 
-au1x00_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *map)
-{
-	struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-	unsigned int speed;
-
-	if(map->map>=MAX_IO_WIN){
-		debug("map (%d) out of range\n", map->map);
-		return -1;
-	}
-
-	if(map->flags&MAP_ACTIVE){
-		speed=(map->speed>0)?map->speed:AU1000_PCMCIA_IO_SPEED;
-		skt->spd_io[map->map] = speed;
-	}
-
-	map->start=(unsigned int)(u32)skt->virt_io;
-	map->stop=map->start+MAP_SIZE;
-	return 0;
-
-}  /* au1x00_pcmcia_set_io_map() */
-
-
-static int 
-au1x00_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
-{
-	struct au1000_pcmcia_socket *skt = to_au1000_socket(sock);
-	unsigned short speed = map->speed;
-
-	if(map->map>=MAX_WIN){
-		debug("map (%d) out of range\n", map->map);
-		return -1;
-	}
-
-	if (map->flags & MAP_ATTRIB) {
-		skt->spd_attr[map->map] = speed;
-		skt->spd_mem[map->map] = 0;
-	} else {
-		skt->spd_attr[map->map] = 0;
-		skt->spd_mem[map->map] = speed;
-	}
-
-	if (map->flags & MAP_ATTRIB) {
-		map->static_start = skt->phys_attr + map->card_start;
-	}
-	else {
-		map->static_start = skt->phys_mem + map->card_start;
-	}
-
-	debug("set_mem_map %d start %08lx card_start %08x\n",
-			map->map, map->static_start, map->card_start);
-	return 0;
-
-}  /* au1x00_pcmcia_set_mem_map() */
-
-static struct pccard_operations au1x00_pcmcia_operations = {
-	.init			= au1x00_pcmcia_sock_init,
-	.suspend		= au1x00_pcmcia_suspend,
-	.get_status		= au1x00_pcmcia_get_status,
-	.set_socket		= au1x00_pcmcia_set_socket,
-	.set_io_map		= au1x00_pcmcia_set_io_map,
-	.set_mem_map		= au1x00_pcmcia_set_mem_map,
-};
-
-static const char *skt_names[] = {
-	"PCMCIA socket 0",
-	"PCMCIA socket 1",
-};
-
-struct skt_dev_info {
-	int nskt;
-};
-
-int au1x00_pcmcia_socket_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr)
-{
-	struct skt_dev_info *sinfo;
-	struct au1000_pcmcia_socket *skt;
-	int ret, i;
-
-	sinfo = kzalloc(sizeof(struct skt_dev_info), GFP_KERNEL);
-	if (!sinfo) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	sinfo->nskt = nr;
-
-	/*
-	 * Initialise the per-socket structure.
-	 */
-	for (i = 0; i < nr; i++) {
-		skt = PCMCIA_SOCKET(i);
-		memset(skt, 0, sizeof(*skt));
-
-		skt->socket.resource_ops = &pccard_static_ops;
-		skt->socket.ops = &au1x00_pcmcia_operations;
-		skt->socket.owner = ops->owner;
-		skt->socket.dev.parent = dev;
-
-		init_timer(&skt->poll_timer);
-		skt->poll_timer.function = au1x00_pcmcia_poll_event;
-		skt->poll_timer.data = (unsigned long)skt;
-		skt->poll_timer.expires = jiffies + AU1000_PCMCIA_POLL_PERIOD;
-
-		skt->nr		= first + i;
-		skt->irq	= 255;
-		skt->dev	= dev;
-		skt->ops	= ops;
-
-		skt->res_skt.name	= skt_names[skt->nr];
-		skt->res_io.name	= "io";
-		skt->res_io.flags	= IORESOURCE_MEM | IORESOURCE_BUSY;
-		skt->res_mem.name	= "memory";
-		skt->res_mem.flags	= IORESOURCE_MEM;
-		skt->res_attr.name	= "attribute";
-		skt->res_attr.flags	= IORESOURCE_MEM;
-
-		/*
-		 * PCMCIA client drivers use the inb/outb macros to access the
-		 * IO registers. Since mips_io_port_base is added to the
-		 * access address of the mips implementation of inb/outb,
-		 * we need to subtract it here because we want to access the
-		 * I/O or MEM address directly, without going through this
-		 * "mips_io_port_base" mechanism.
-		 */
-		if (i == 0) {
-			skt->virt_io = (void *)
-				(ioremap((phys_t)AU1X_SOCK0_IO, 0x1000) -
-				(u32)mips_io_port_base);
-			skt->phys_attr = AU1X_SOCK0_PHYS_ATTR;
-			skt->phys_mem = AU1X_SOCK0_PHYS_MEM;
-		}
-		else  {
-			skt->virt_io = (void *)
-				(ioremap((phys_t)AU1X_SOCK1_IO, 0x1000) -
-				(u32)mips_io_port_base);
-			skt->phys_attr = AU1X_SOCK1_PHYS_ATTR;
-			skt->phys_mem = AU1X_SOCK1_PHYS_MEM;
-		}
-		pcmcia_base_vaddrs[i] = (u32 *)skt->virt_io;
-		ret = ops->hw_init(skt);
-
-		skt->socket.features = SS_CAP_STATIC_MAP|SS_CAP_PCCARD;
-		skt->socket.irq_mask = 0;
-		skt->socket.map_size = MAP_SIZE;
-		skt->socket.pci_irq = skt->irq;
-		skt->socket.io_offset = (unsigned long)skt->virt_io;
-
-		skt->status = au1x00_pcmcia_skt_state(skt);
-
-		ret = pcmcia_register_socket(&skt->socket);
-		if (ret)
-			goto out_err;
-
-		WARN_ON(skt->socket.sock != i);
-
-		add_timer(&skt->poll_timer);
-	}
-
-	dev_set_drvdata(dev, sinfo);
-	return 0;
-
-
-out_err:
-	ops->hw_shutdown(skt);
-	while (i-- > 0) {
-		skt = PCMCIA_SOCKET(i);
-
-		del_timer_sync(&skt->poll_timer);
-		pcmcia_unregister_socket(&skt->socket);
-		if (i == 0) {
-			iounmap(skt->virt_io + (u32)mips_io_port_base);
-			skt->virt_io = NULL;
-		}
-#ifndef CONFIG_MIPS_XXS1500
-		else {
-			iounmap(skt->virt_io + (u32)mips_io_port_base);
-			skt->virt_io = NULL;
-		}
-#endif
-		ops->hw_shutdown(skt);
-
-	}
-	kfree(sinfo);
-out:
-	return ret;
-}
-
-int au1x00_drv_pcmcia_remove(struct platform_device *dev)
-{
-	struct skt_dev_info *sinfo = platform_get_drvdata(dev);
-	int i;
-
-	mutex_lock(&pcmcia_sockets_lock);
-	platform_set_drvdata(dev, NULL);
-
-	for (i = 0; i < sinfo->nskt; i++) {
-		struct au1000_pcmcia_socket *skt = PCMCIA_SOCKET(i);
-
-		del_timer_sync(&skt->poll_timer);
-		pcmcia_unregister_socket(&skt->socket);
-		skt->ops->hw_shutdown(skt);
-		au1x00_pcmcia_config_skt(skt, &dead_socket);
-		iounmap(skt->virt_io + (u32)mips_io_port_base);
-		skt->virt_io = NULL;
-	}
-
-	kfree(sinfo);
-	mutex_unlock(&pcmcia_sockets_lock);
-	return 0;
-}
-
-
-/*
- * PCMCIA "Driver" API
- */
-
-static int au1x00_drv_pcmcia_probe(struct platform_device *dev)
-{
-	int i, ret = -ENODEV;
-
-	mutex_lock(&pcmcia_sockets_lock);
-	for (i=0; i < ARRAY_SIZE(au1x00_pcmcia_hw_init); i++) {
-		ret = au1x00_pcmcia_hw_init[i](&dev->dev);
-		if (ret == 0)
-			break;
-	}
-	mutex_unlock(&pcmcia_sockets_lock);
-	return ret;
-}
-
-static struct platform_driver au1x00_pcmcia_driver = {
-	.driver = {
-		.name		= "au1x00-pcmcia",
-		.owner		= THIS_MODULE,
-	},
-	.probe		= au1x00_drv_pcmcia_probe,
-	.remove		= au1x00_drv_pcmcia_remove,
-};
-
-
-/* au1x00_pcmcia_init()
- *
- * This routine performs low-level PCMCIA initialization and then
- * registers this socket driver with Card Services.
- *
- * Returns: 0 on success, -ve error code on failure
- */
-static int __init au1x00_pcmcia_init(void)
-{
-	int error = 0;
-	error = platform_driver_register(&au1x00_pcmcia_driver);
-	return error;
-}
-
-/* au1x00_pcmcia_exit()
- * Invokes the low-level kernel service to free IRQs associated with this
- * socket controller and reset GPIO edge detection.
- */
-static void __exit au1x00_pcmcia_exit(void)
-{
-	platform_driver_unregister(&au1x00_pcmcia_driver);
-}
-
-module_init(au1x00_pcmcia_init);
-module_exit(au1x00_pcmcia_exit);
diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h
deleted file mode 100644
index 5c36bda2963b..000000000000
--- a/drivers/pcmcia/au1000_generic.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Alchemy Semi Au1000 pcmcia driver include file
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#ifndef __ASM_AU1000_PCMCIA_H
-#define __ASM_AU1000_PCMCIA_H
-
-/* include the world */
-
-#include <pcmcia/ss.h>
-#include <pcmcia/cistpl.h>
-#include "cs_internal.h"
-
-#define AU1000_PCMCIA_POLL_PERIOD    (2*HZ)
-#define AU1000_PCMCIA_IO_SPEED       (255)
-#define AU1000_PCMCIA_MEM_SPEED      (300)
-
-#define AU1X_SOCK0_IO        0xF00000000ULL
-#define AU1X_SOCK0_PHYS_ATTR 0xF40000000ULL
-#define AU1X_SOCK0_PHYS_MEM  0xF80000000ULL
-
-/* pcmcia socket 1 needs external glue logic so the memory map
- * differs from board to board.
- */
-#if defined(CONFIG_MIPS_PB1000)
-#define AU1X_SOCK1_IO        0xF08000000ULL
-#define AU1X_SOCK1_PHYS_ATTR 0xF48000000ULL
-#define AU1X_SOCK1_PHYS_MEM  0xF88000000ULL
-#endif
-
-struct pcmcia_state {
-  unsigned detect: 1,
-            ready: 1,
-           wrprot: 1,
-	     bvd1: 1,
-	     bvd2: 1,
-            vs_3v: 1,
-            vs_Xv: 1;
-};
-
-struct pcmcia_configure {
-  unsigned sock: 8,
-            vcc: 8,
-            vpp: 8,
-         output: 1,
-        speaker: 1,
-          reset: 1;
-};
-
-struct pcmcia_irqs {
-	int sock;
-	int irq;
-	const char *str;
-};
-
-
-struct au1000_pcmcia_socket {
-	struct pcmcia_socket socket;
-
-	/*
-	 * Info from low level handler
-	 */
-	struct device		*dev;
-	unsigned int		nr;
-	unsigned int		irq;
-
-	/*
-	 * Core PCMCIA state
-	 */
-	struct pcmcia_low_level *ops;
-
-	unsigned int 		status;
-	socket_state_t		cs_state;
-
-	unsigned short		spd_io[MAX_IO_WIN];
-	unsigned short		spd_mem[MAX_WIN];
-	unsigned short		spd_attr[MAX_WIN];
-
-	struct resource		res_skt;
-	struct resource		res_io;
-	struct resource		res_mem;
-	struct resource		res_attr;
-
-	void *                 	virt_io;
-	unsigned int		phys_io;
-	unsigned int           	phys_attr;
-	unsigned int           	phys_mem;
-	unsigned short        	speed_io, speed_attr, speed_mem;
-
-	unsigned int		irq_state;
-
-	struct timer_list	poll_timer;
-};
-
-struct pcmcia_low_level {
-	struct module *owner;
-
-	int (*hw_init)(struct au1000_pcmcia_socket *);
-	void (*hw_shutdown)(struct au1000_pcmcia_socket *);
-
-	void (*socket_state)(struct au1000_pcmcia_socket *, struct pcmcia_state *);
-	int (*configure_socket)(struct au1000_pcmcia_socket *, struct socket_state_t *);
-
-	/*
-	 * Enable card status IRQs on (re-)initialisation.  This can
-	 * be called at initialisation, power management event, or
-	 * pcmcia event.
-	 */
-	void (*socket_init)(struct au1000_pcmcia_socket *);
-
-	/*
-	 * Disable card status IRQs and PCMCIA bus on suspend.
-	 */
-	void (*socket_suspend)(struct au1000_pcmcia_socket *);
-};
-
-extern int au1x_board_init(struct device *dev);
-
-#endif /* __ASM_AU1000_PCMCIA_H */
diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c
deleted file mode 100644
index b2396647a165..000000000000
--- a/drivers/pcmcia/au1000_pb1x00.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- *
- * Alchemy Semi Pb1000 boards specific pcmcia routines.
- *
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/proc_fs.h>
-#include <linux/types.h>
-
-#include <pcmcia/ss.h>
-#include <pcmcia/cistpl.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
-#include <asm/au1000.h>
-#include <asm/au1000_pcmcia.h>
-
-#define debug(fmt, arg...) do { } while (0)
-
-#include <asm/pb1000.h>
-#define PCMCIA_IRQ AU1000_GPIO_15
-
-static int pb1x00_pcmcia_init(struct pcmcia_init *init)
-{
-	u16 pcr;
-	pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
-
-	au_writel(0x8000, PB1000_MDR); /* clear pcmcia interrupt */
-	au_sync_delay(100);
-	au_writel(0x4000, PB1000_MDR); /* enable pcmcia interrupt */
-	au_sync();
-
-	pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0);
-	pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1);
-	au_writel(pcr, PB1000_PCR);
-	au_sync_delay(20);
-	  
-	return PCMCIA_NUM_SOCKS;
-}
-
-static int pb1x00_pcmcia_shutdown(void)
-{
-	u16 pcr;
-	pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
-	pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0);
-	pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1);
-	au_writel(pcr, PB1000_PCR);
-	au_sync_delay(20);
-	return 0;
-}
-
-static int 
-pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
-{
-	u32 inserted0, inserted1;
-	u16 vs0, vs1;
-
-	vs0 = vs1 = (u16)au_readl(PB1000_ACR1);
-	inserted0 = !(vs0 & (ACR1_SLOT_0_CD1 | ACR1_SLOT_0_CD2));
-	inserted1 = !(vs1 & (ACR1_SLOT_1_CD1 | ACR1_SLOT_1_CD2));
-	vs0 = (vs0 >> 4) & 0x3;
-	vs1 = (vs1 >> 12) & 0x3;
-
-	state->ready = 0;
-	state->vs_Xv = 0;
-	state->vs_3v = 0;
-	state->detect = 0;
-
-	if (sock == 0) {
-		if (inserted0) {
-			switch (vs0) {
-				case 0:
-				case 2:
-					state->vs_3v=1;
-					break;
-				case 3: /* 5V */
-					break;
-				default:
-					/* return without setting 'detect' */
-					printk(KERN_ERR "pb1x00 bad VS (%d)\n",
-							vs0);
-					return 0;
-			}
-			state->detect = 1;
-		}
-	}
-	else  {
-		if (inserted1) {
-			switch (vs1) {
-				case 0:
-				case 2:
-					state->vs_3v=1;
-					break;
-				case 3: /* 5V */
-					break;
-				default:
-					/* return without setting 'detect' */
-					printk(KERN_ERR "pb1x00 bad VS (%d)\n",
-							vs1);
-					return 0;
-			}
-			state->detect = 1;
-		}
-	}
-
-	if (state->detect) {
-		state->ready = 1;
-	}
-
-	state->bvd1=1;
-	state->bvd2=1;
-	state->wrprot=0; 
-	return 1;
-}
-
-
-static int pb1x00_pcmcia_get_irq_info(struct pcmcia_irq_info *info)
-{
-
-	if(info->sock > PCMCIA_MAX_SOCK) return -1;
-
-	/*
-	 * Even in the case of the Pb1000, both sockets are connected
-	 * to the same irq line.
-	 */
-	info->irq = PCMCIA_IRQ;
-
-	return 0;
-}
-
-
-static int 
-pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
-{
-	u16 pcr;
-
-	if(configure->sock > PCMCIA_MAX_SOCK) return -1;
-
-	pcr = au_readl(PB1000_PCR);
-
-	if (configure->sock == 0) {
-		pcr &= ~(PCR_SLOT_0_VCC0 | PCR_SLOT_0_VCC1 | 
-				PCR_SLOT_0_VPP0 | PCR_SLOT_0_VPP1);
-	}
-	else  {
-		pcr &= ~(PCR_SLOT_1_VCC0 | PCR_SLOT_1_VCC1 | 
-				PCR_SLOT_1_VPP0 | PCR_SLOT_1_VPP1);
-	}
-
-	pcr &= ~PCR_SLOT_0_RST;
-	debug("Vcc %dV Vpp %dV, pcr %x\n", 
-			configure->vcc, configure->vpp, pcr);
-	switch(configure->vcc){
-		case 0:  /* Vcc 0 */
-			switch(configure->vpp) {
-				case 0:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_GND,
-							configure->sock);
-					break;
-				case 12:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_12V,
-							configure->sock);
-					break;
-				case 50:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_5V,
-							configure->sock);
-					break;
-				case 33:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_3V,
-							configure->sock);
-					break;
-				default:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
-							configure->sock);
-					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-							__func__,
-							configure->vcc, 
-							configure->vpp);
-					break;
-			}
-			break;
-		case 50: /* Vcc 5V */
-			switch(configure->vpp) {
-				case 0:
-					pcr |= SET_VCC_VPP(VCC_5V,VPP_GND,
-							configure->sock);
-					break;
-				case 50:
-					pcr |= SET_VCC_VPP(VCC_5V,VPP_5V,
-							configure->sock);
-					break;
-				case 12:
-					pcr |= SET_VCC_VPP(VCC_5V,VPP_12V,
-							configure->sock);
-					break;
-				case 33:
-					pcr |= SET_VCC_VPP(VCC_5V,VPP_3V,
-							configure->sock);
-					break;
-				default:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
-							configure->sock);
-					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-							__func__,
-							configure->vcc, 
-							configure->vpp);
-					break;
-			}
-			break;
-		case 33: /* Vcc 3.3V */
-			switch(configure->vpp) {
-				case 0:
-					pcr |= SET_VCC_VPP(VCC_3V,VPP_GND,
-							configure->sock);
-					break;
-				case 50:
-					pcr |= SET_VCC_VPP(VCC_3V,VPP_5V,
-							configure->sock);
-					break;
-				case 12:
-					pcr |= SET_VCC_VPP(VCC_3V,VPP_12V,
-							configure->sock);
-					break;
-				case 33:
-					pcr |= SET_VCC_VPP(VCC_3V,VPP_3V,
-							configure->sock);
-					break;
-				default:
-					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
-							configure->sock);
-					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-							__func__,
-							configure->vcc, 
-							configure->vpp);
-					break;
-			}
-			break;
-		default: /* what's this ? */
-			pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,configure->sock);
-			printk(KERN_ERR "%s: bad Vcc %d\n", 
-					__func__, configure->vcc);
-			break;
-	}
-
-	if (configure->sock == 0) {
-	pcr &= ~(PCR_SLOT_0_RST);
-		if (configure->reset)
-		pcr |= PCR_SLOT_0_RST;
-	}
-	else {
-		pcr &= ~(PCR_SLOT_1_RST);
-		if (configure->reset)
-			pcr |= PCR_SLOT_1_RST;
-	}
-	au_writel(pcr, PB1000_PCR);
-	au_sync_delay(300);
-
-	return 0;
-}
-
-
-struct pcmcia_low_level pb1x00_pcmcia_ops = { 
-	pb1x00_pcmcia_init,
-	pb1x00_pcmcia_shutdown,
-	pb1x00_pcmcia_socket_state,
-	pb1x00_pcmcia_get_irq_info,
-	pb1x00_pcmcia_configure_socket
-};
diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c
index 3e49df6d5e3b..5b7c22784aff 100644
--- a/drivers/pcmcia/db1xxx_ss.c
+++ b/drivers/pcmcia/db1xxx_ss.c
@@ -7,7 +7,7 @@
 
 /* This is a fairly generic PCMCIA socket driver suitable for the
  * following Alchemy Development boards:
- *  Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200.
+ *  Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200, Db1300
  *
  * The Db1000 is used as a reference:  Per-socket card-, carddetect- and
  *  statuschange IRQs connected to SoC GPIOs, control and status register
@@ -18,6 +18,7 @@
  *	- Pb1100/Pb1500:  single socket only; voltage key bits VS are
  *			  at STATUS[5:4] (instead of STATUS[1:0]).
  *	- Au1200-based:	  additional card-eject irqs, irqs not gpios!
+ *	- Db1300:	  Db1200-like, no pwr ctrl, single socket (#1).
  */
 
 #include <linux/delay.h>
@@ -59,11 +60,17 @@ struct db1x_pcmcia_sock {
 #define BOARD_TYPE_DEFAULT	0	/* most boards */
 #define BOARD_TYPE_DB1200	1	/* IRQs aren't gpios */
 #define BOARD_TYPE_PB1100	2	/* VS bits slightly different */
+#define BOARD_TYPE_DB1300	3	/* no power control */
 	int	board_type;
 };
 
 #define to_db1x_socket(x) container_of(x, struct db1x_pcmcia_sock, socket)
 
+static int db1300_card_inserted(struct db1x_pcmcia_sock *sock)
+{
+	return bcsr_read(BCSR_SIGSTAT) & (1 << 8);
+}
+
 /* DB/PB1200: check CPLD SIGSTATUS register bit 10/12 */
 static int db1200_card_inserted(struct db1x_pcmcia_sock *sock)
 {
@@ -84,6 +91,8 @@ static int db1x_card_inserted(struct db1x_pcmcia_sock *sock)
 	switch (sock->board_type) {
 	case BOARD_TYPE_DB1200:
 		return db1200_card_inserted(sock);
+	case BOARD_TYPE_DB1300:
+		return db1300_card_inserted(sock);
 	default:
 		return db1000_card_inserted(sock);
 	}
@@ -160,7 +169,8 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
 	 * ejection handler have been registered and the currently
 	 * active one disabled.
 	 */
-	if (sock->board_type == BOARD_TYPE_DB1200) {
+	if ((sock->board_type == BOARD_TYPE_DB1200) ||
+	    (sock->board_type == BOARD_TYPE_DB1300)) {
 		ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq,
 				  IRQF_DISABLED, "pcmcia_insert", sock);
 		if (ret)
@@ -174,7 +184,7 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
 		}
 
 		/* enable the currently silent one */
-		if (db1200_card_inserted(sock))
+		if (db1x_card_inserted(sock))
 			enable_irq(sock->eject_irq);
 		else
 			enable_irq(sock->insert_irq);
@@ -270,7 +280,8 @@ static int db1x_pcmcia_configure(struct pcmcia_socket *skt,
 	}
 
 	/* create new voltage code */
-	cr_set |= ((v << 2) | p) << (sock->nr * 8);
+	if (sock->board_type != BOARD_TYPE_DB1300)
+		cr_set |= ((v << 2) | p) << (sock->nr * 8);
 
 	changed = state->flags ^ sock->old_flags;
 
@@ -343,6 +354,10 @@ static int db1x_pcmcia_get_status(struct pcmcia_socket *skt,
 	/* if Vcc is not zero, we have applied power to a card */
 	status |= GET_VCC(cr, sock->nr) ? SS_POWERON : 0;
 
+	/* DB1300: power always on, but don't tell when no card present */
+	if ((sock->board_type == BOARD_TYPE_DB1300) && (status & SS_DETECT))
+		status = SS_POWERON | SS_3VCARD | SS_DETECT;
+
 	/* reset de-asserted? then we're ready */
 	status |= (GET_RESET(cr, sock->nr)) ? SS_READY : SS_RESET;
 
@@ -419,6 +434,9 @@ static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev)
 	case BCSR_WHOAMI_PB1200 ... BCSR_WHOAMI_DB1200:
 		sock->board_type = BOARD_TYPE_DB1200;
 		break;
+	case BCSR_WHOAMI_DB1300:
+		sock->board_type = BOARD_TYPE_DB1300;
+		break;
 	default:
 		printk(KERN_INFO "db1xxx-ss: unknown board %d!\n", bid);
 		ret = -ENODEV;
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index a1fd73df5416..369e092bf3d5 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -87,12 +87,12 @@ config SPI_BFIN_SPORT
 	  Enable support for a SPI bus via the Blackfin SPORT peripheral.
 
 config SPI_AU1550
-	tristate "Au1550/Au12x0 SPI Controller"
+	tristate "Au1550/Au1200/Au1300 SPI Controller"
 	depends on MIPS_ALCHEMY && EXPERIMENTAL
 	select SPI_BITBANG
 	help
 	  If you say yes to this option, support will be included for the
-	  Au1550 SPI controller (may also work with Au1200,Au1210,Au1250).
+	  PSC SPI controller found on Au1550, Au1200 and Au1300 series.
 
 config SPI_BITBANG
 	tristate "Utilities for Bitbanging SPI masters"
diff --git a/drivers/usb/host/alchemy-common.c b/drivers/usb/host/alchemy-common.c
index b4192c964d0d..936af8359fb2 100644
--- a/drivers/usb/host/alchemy-common.c
+++ b/drivers/usb/host/alchemy-common.c
@@ -52,9 +52,263 @@
 				 USBCFG_EBE | USBCFG_EME | USBCFG_OBE |	       \
 				 USBCFG_OME)
 
+/* Au1300 USB config registers */
+#define USB_DWC_CTRL1		0x00
+#define USB_DWC_CTRL2		0x04
+#define USB_VBUS_TIMER		0x10
+#define USB_SBUS_CTRL		0x14
+#define USB_MSR_ERR		0x18
+#define USB_DWC_CTRL3		0x1C
+#define USB_DWC_CTRL4		0x20
+#define USB_OTG_STATUS		0x28
+#define USB_DWC_CTRL5		0x2C
+#define USB_DWC_CTRL6		0x30
+#define USB_DWC_CTRL7		0x34
+#define USB_PHY_STATUS		0xC0
+#define USB_INT_STATUS		0xC4
+#define USB_INT_ENABLE		0xC8
+
+#define USB_DWC_CTRL1_OTGD	0x04 /* set to DISable OTG */
+#define USB_DWC_CTRL1_HSTRS	0x02 /* set to ENable EHCI */
+#define USB_DWC_CTRL1_DCRS	0x01 /* set to ENable UDC */
+
+#define USB_DWC_CTRL2_PHY1RS	0x04 /* set to enable PHY1 */
+#define USB_DWC_CTRL2_PHY0RS	0x02 /* set to enable PHY0 */
+#define USB_DWC_CTRL2_PHYRS	0x01 /* set to enable PHY */
+
+#define USB_DWC_CTRL3_OHCI1_CKEN	(1 << 19)
+#define USB_DWC_CTRL3_OHCI0_CKEN	(1 << 18)
+#define USB_DWC_CTRL3_EHCI0_CKEN	(1 << 17)
+#define USB_DWC_CTRL3_OTG0_CKEN		(1 << 16)
+
+#define USB_SBUS_CTRL_SBCA		0x04 /* coherent access */
+
+#define USB_INTEN_FORCE			0x20
+#define USB_INTEN_PHY			0x10
+#define USB_INTEN_UDC			0x08
+#define USB_INTEN_EHCI			0x04
+#define USB_INTEN_OHCI1			0x02
+#define USB_INTEN_OHCI0			0x01
 
 static DEFINE_SPINLOCK(alchemy_usb_lock);
 
+static inline void __au1300_usb_phyctl(void __iomem *base, int enable)
+{
+	unsigned long r, s;
+
+	r = __raw_readl(base + USB_DWC_CTRL2);
+	s = __raw_readl(base + USB_DWC_CTRL3);
+
+	s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN |
+		USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN;
+
+	if (enable) {
+		/* simply enable all PHYs */
+		r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
+		     USB_DWC_CTRL2_PHYRS;
+		__raw_writel(r, base + USB_DWC_CTRL2);
+		wmb();
+	} else if (!s) {
+		/* no USB block active, do disable all PHYs */
+		r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
+		       USB_DWC_CTRL2_PHYRS);
+		__raw_writel(r, base + USB_DWC_CTRL2);
+		wmb();
+	}
+}
+
+static inline void __au1300_ohci_control(void __iomem *base, int enable, int id)
+{
+	unsigned long r;
+
+	if (enable) {
+		__raw_writel(1, base + USB_DWC_CTRL7);  /* start OHCI clock */
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL3);	/* enable OHCI block */
+		r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
+			       : USB_DWC_CTRL3_OHCI1_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);	/* power up the PHYs */
+
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+
+		/* reset the OHCI start clock bit */
+		__raw_writel(0, base + USB_DWC_CTRL7);
+		wmb();
+	} else {
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1);
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
+				 : USB_DWC_CTRL3_OHCI1_CKEN);
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	}
+}
+
+static inline void __au1300_ehci_control(void __iomem *base, int enable)
+{
+	unsigned long r;
+
+	if (enable) {
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r |= USB_DWC_CTRL3_EHCI0_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r |= USB_DWC_CTRL1_HSTRS;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r |= USB_INTEN_EHCI;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+	} else {
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r &= ~USB_INTEN_EHCI;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r &= ~USB_DWC_CTRL1_HSTRS;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r &= ~USB_DWC_CTRL3_EHCI0_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	}
+}
+
+static inline void __au1300_udc_control(void __iomem *base, int enable)
+{
+	unsigned long r;
+
+	if (enable) {
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r |= USB_DWC_CTRL1_DCRS;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r |= USB_INTEN_UDC;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+	} else {
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r &= ~USB_INTEN_UDC;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r &= ~USB_DWC_CTRL1_DCRS;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	}
+}
+
+static inline void __au1300_otg_control(void __iomem *base, int enable)
+{
+	unsigned long r;
+	if (enable) {
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r |= USB_DWC_CTRL3_OTG0_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r &= ~USB_DWC_CTRL1_OTGD;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	} else {
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r |= USB_DWC_CTRL1_OTGD;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r &= ~USB_DWC_CTRL3_OTG0_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	}
+}
+
+static inline int au1300_usb_control(int block, int enable)
+{
+	void __iomem *base =
+		(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
+	int ret = 0;
+
+	switch (block) {
+	case ALCHEMY_USB_OHCI0:
+		__au1300_ohci_control(base, enable, 0);
+		break;
+	case ALCHEMY_USB_OHCI1:
+		__au1300_ohci_control(base, enable, 1);
+		break;
+	case ALCHEMY_USB_EHCI0:
+		__au1300_ehci_control(base, enable);
+		break;
+	case ALCHEMY_USB_UDC0:
+		__au1300_udc_control(base, enable);
+		break;
+	case ALCHEMY_USB_OTG0:
+		__au1300_otg_control(base, enable);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+	return ret;
+}
+
+static inline void au1300_usb_init(void)
+{
+	void __iomem *base =
+		(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
+
+	/* set some sane defaults.  Note: we don't fiddle with DWC_CTRL4
+	 * here at all: Port 2 routing (EHCI or UDC) must be set either
+	 * by boot firmware or platform init code; I can't autodetect
+	 * a sane setting.
+	 */
+	__raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */
+	wmb();
+	__raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */
+	wmb();
+	__raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */
+	wmb();
+	__raw_writel(~0, base + USB_INT_STATUS); /* clear int status */
+	wmb();
+	/* set coherent access bit */
+	__raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL);
+	wmb();
+}
 
 static inline void __au1200_ohci_control(void __iomem *base, int enable)
 {
@@ -233,6 +487,9 @@ int alchemy_usb_control(int block, int enable)
 	case ALCHEMY_CPU_AU1200:
 		ret = au1200_usb_control(block, enable);
 		break;
+	case ALCHEMY_CPU_AU1300:
+		ret = au1300_usb_control(block, enable);
+		break;
 	default:
 		ret = -ENODEV;
 	}
@@ -281,6 +538,20 @@ static void au1200_usb_pm(int susp)
 	}
 }
 
+static void au1300_usb_pm(int susp)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
+	/* remember Port2 routing */
+	if (susp) {
+		alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4);
+	} else {
+		au1300_usb_init();
+		__raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4);
+		wmb();
+	}
+}
+
 static void alchemy_usb_pm(int susp)
 {
 	switch (alchemy_get_cputype()) {
@@ -295,6 +566,9 @@ static void alchemy_usb_pm(int susp)
 	case ALCHEMY_CPU_AU1200:
 		au1200_usb_pm(susp);
 		break;
+	case ALCHEMY_CPU_AU1300:
+		au1300_usb_pm(susp);
+		break;
 	}
 }
 
@@ -328,6 +602,9 @@ static int __init alchemy_usb_init(void)
 	case ALCHEMY_CPU_AU1200:
 		au1200_usb_init();
 		break;
+	case ALCHEMY_CPU_AU1300:
+		au1300_usb_init();
+		break;
 	}
 
 	register_syscore_ops(&alchemy_usb_pm_ops);
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 9b66df8278f3..95d1a71dccad 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -89,7 +89,7 @@ static const struct hc_driver ohci_au1xxx_hc_driver = {
 
 static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 {
-	int ret;
+	int ret, unit;
 	struct usb_hcd *hcd;
 
 	if (usb_disabled())
@@ -120,7 +120,9 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 		goto err2;
 	}
 
-	if (alchemy_usb_control(ALCHEMY_USB_OHCI0, 1)) {
+	unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ?
+			ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
+	if (alchemy_usb_control(unit, 1)) {
 		printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
 		ret = -ENODEV;
 		goto err3;
@@ -135,7 +137,7 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
+	alchemy_usb_control(unit, 0);
 err3:
 	iounmap(hcd->regs);
 err2:
@@ -148,9 +150,12 @@ err1:
 static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	int unit;
 
+	unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ?
+			ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
 	usb_remove_hcd(hcd);
-	alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
+	alchemy_usb_control(unit, 0);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d83e967e4e15..acd4ba555e3a 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1763,16 +1763,16 @@ config FB_AU1100
 	  au1100fb:panel=<name>.
 
 config FB_AU1200
-	bool "Au1200 LCD Driver"
+	bool "Au1200/Au1300 LCD Driver"
 	depends on (FB = y) && MIPS_ALCHEMY
 	select FB_SYS_FILLRECT
 	select FB_SYS_COPYAREA
 	select FB_SYS_IMAGEBLIT
 	select FB_SYS_FOPS
 	help
-	  This is the framebuffer driver for the AMD Au1200 SOC.  It can drive
-	  various panels and CRTs by passing in kernel cmd line option
-	  au1200fb:panel=<name>.
+	  This is the framebuffer driver for the Au1200/Au1300 SOCs.
+	  It can drive various panels and CRTs by passing in kernel cmd line
+	  option au1200fb:panel=<name>.
 
 config FB_VT8500
 	bool "VT8500 LCD Driver"
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 649cb35de4ed..de9da6774fd9 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -60,18 +60,6 @@
 
 #include "au1100fb.h"
 
-/*
- * Sanity check. If this is a new Au1100 based board, search for
- * the PB1100 ifdefs to make sure you modify the code accordingly.
- */
-#if defined(CONFIG_MIPS_PB1100)
-  #include <asm/mach-pb1x00/pb1100.h>
-#elif defined(CONFIG_MIPS_DB1100)
-  #include <asm/mach-db1x00/db1x00.h>
-#else
-  #error "Unknown Au1100 board, Au1100 FB driver not supported"
-#endif
-
 #define DRIVER_NAME "au1100fb"
 #define DRIVER_DESC "LCD controller driver for AU1100 processors"
 
diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c
index 72005598040f..04e4479d5afd 100644
--- a/drivers/video/au1200fb.c
+++ b/drivers/video/au1200fb.c
@@ -44,6 +44,7 @@
 #include <linux/slab.h>
 
 #include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1200fb.h>	/* platform_data */
 #include "au1200fb.h"
 
 #define DRIVER_NAME "au1200fb"
@@ -143,6 +144,7 @@ struct au1200_lcd_iodata_t {
 /* Private, per-framebuffer management information (independent of the panel itself) */
 struct au1200fb_device {
 	struct fb_info *fb_info;		/* FB driver info record */
+	struct au1200fb_platdata *pd;
 
 	int					plane;
 	unsigned char* 		fb_mem;		/* FrameBuffer memory map */
@@ -201,9 +203,6 @@ struct window_settings {
 #define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_01
 #endif
 
-extern int board_au1200fb_panel_init (void);
-extern int board_au1200fb_panel_shutdown (void);
-
 /*
  * Default window configurations
  */
@@ -334,8 +333,6 @@ struct panel_settings
 	uint32 mode_toyclksrc;
 	uint32 mode_backlight;
 	uint32 mode_auxpll;
-	int (*device_init)(void);
-	int (*device_shutdown)(void);
 #define Xres min_xres
 #define Yres min_yres
 	u32	min_xres;		/* Minimum horizontal resolution */
@@ -385,8 +382,6 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
 		320, 320,
 		240, 240,
 	},
@@ -415,8 +410,6 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
 		640, 480,
 		640, 480,
 	},
@@ -445,8 +438,6 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
 		800, 800,
 		600, 600,
 	},
@@ -475,8 +466,6 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 6, /* 72MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
 		1024, 1024,
 		768, 768,
 	},
@@ -505,8 +494,6 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 10, /* 120MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
 		1280, 1280,
 		1024, 1024,
 	},
@@ -535,8 +522,6 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
 		1024, 1024,
 		768, 768,
 	},
@@ -568,8 +553,6 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
 		640, 480,
 		640, 480,
 	},
@@ -601,8 +584,6 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
 		320, 320,
 		240, 240,
 	},
@@ -634,11 +615,43 @@ static struct panel_settings known_lcd_panels[] =
 		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
 		.mode_backlight	= 0x00000000,
 		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
 		856, 856,
 		480, 480,
 	},
+	[9] = {
+		.name = "DB1300_800x480",
+		.monspecs = {
+			.modedb = NULL,
+			.modedb_len = 0,
+			.hfmin = 30000,
+			.hfmax = 70000,
+			.vfmin = 60,
+			.vfmax = 60,
+			.dclkmin = 6000000,
+			.dclkmax = 28000000,
+			.input = FB_DISP_RGB,
+		},
+		.mode_screen		= LCD_SCREEN_SX_N(800) |
+					  LCD_SCREEN_SY_N(480),
+		.mode_horztiming	= LCD_HORZTIMING_HPW_N(5) |
+					  LCD_HORZTIMING_HND1_N(16) |
+					  LCD_HORZTIMING_HND2_N(8),
+		.mode_verttiming	= LCD_VERTTIMING_VPW_N(4) |
+					  LCD_VERTTIMING_VND1_N(8) |
+					  LCD_VERTTIMING_VND2_N(5),
+		.mode_clkcontrol	= LCD_CLKCONTROL_PCD_N(1) |
+					  LCD_CLKCONTROL_IV |
+					  LCD_CLKCONTROL_IH,
+		.mode_pwmdiv		= 0x00000000,
+		.mode_pwmhi		= 0x00000000,
+		.mode_outmask		= 0x00FFFFFF,
+		.mode_fifoctrl		= 0x2f2f2f2f,
+		.mode_toyclksrc		= 0x00000004, /* AUXPLL directly */
+		.mode_backlight		= 0x00000000,
+		.mode_auxpll		= (48/12) * 2,
+		800, 800,
+		480, 480,
+	},
 };
 
 #define NUM_PANELS (ARRAY_SIZE(known_lcd_panels))
@@ -764,7 +777,8 @@ static int au1200_setlocation (struct au1200fb_device *fbdev, int plane,
 	return 0;
 }
 
-static void au1200_setpanel (struct panel_settings *newpanel)
+static void au1200_setpanel(struct panel_settings *newpanel,
+			    struct au1200fb_platdata *pd)
 {
 	/*
 	 * Perform global setup/init of LCD controller
@@ -798,8 +812,8 @@ static void au1200_setpanel (struct panel_settings *newpanel)
 		    the controller, the clock cannot be turned off before first
 			shutting down the controller.
 		 */
-		if (panel->device_shutdown != NULL)
-			panel->device_shutdown();
+		if (pd->panel_shutdown)
+			pd->panel_shutdown();
 	}
 
 	/* Newpanel == NULL indicates a shutdown operation only */
@@ -852,7 +866,8 @@ static void au1200_setpanel (struct panel_settings *newpanel)
 	au_sync();
 
 	/* Call init of panel */
-	if (panel->device_init != NULL) panel->device_init();
+	if (pd->panel_init)
+		pd->panel_init();
 
 	/* FIX!!!! not appropriate on panel change!!! Global setup/init */
 	lcd->intenable = 0;
@@ -1185,6 +1200,8 @@ static int au1200fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green,
  */
 static int au1200fb_fb_blank(int blank_mode, struct fb_info *fbi)
 {
+	struct au1200fb_device *fbdev = fbi->par;
+
 	/* Short-circuit screen blanking */
 	if (noblanking)
 		return 0;
@@ -1194,13 +1211,13 @@ static int au1200fb_fb_blank(int blank_mode, struct fb_info *fbi)
 	case FB_BLANK_UNBLANK:
 	case FB_BLANK_NORMAL:
 		/* printk("turn on panel\n"); */
-		au1200_setpanel(panel);
+		au1200_setpanel(panel, fbdev->pd);
 		break;
 	case FB_BLANK_VSYNC_SUSPEND:
 	case FB_BLANK_HSYNC_SUSPEND:
 	case FB_BLANK_POWERDOWN:
 		/* printk("turn off panel\n"); */
-		au1200_setpanel(NULL);
+		au1200_setpanel(NULL, fbdev->pd);
 		break;
 	default:
 		break;
@@ -1428,6 +1445,7 @@ static void get_window(unsigned int plane,
 static int au1200fb_ioctl(struct fb_info *info, unsigned int cmd,
                           unsigned long arg)
 {
+	struct au1200fb_device *fbdev = info->par;
 	int plane;
 	int val;
 
@@ -1472,7 +1490,7 @@ static int au1200fb_ioctl(struct fb_info *info, unsigned int cmd,
 				struct panel_settings *newpanel;
 				panel_index = iodata.global.panel_choice;
 				newpanel = &known_lcd_panels[panel_index];
-				au1200_setpanel(newpanel);
+				au1200_setpanel(newpanel, fbdev->pd);
 			}
 			break;
 
@@ -1588,22 +1606,102 @@ static int au1200fb_init_fbinfo(struct au1200fb_device *fbdev)
 
 /*-------------------------------------------------------------------------*/
 
-/* AU1200 LCD controller device driver */
 
+static int au1200fb_setup(struct au1200fb_platdata *pd)
+{
+	char *options = NULL;
+	char *this_opt, *endptr;
+	int num_panels = ARRAY_SIZE(known_lcd_panels);
+	int panel_idx = -1;
+
+	fb_get_options(DRIVER_NAME, &options);
+
+	if (!options)
+		goto out;
+
+	while ((this_opt = strsep(&options, ",")) != NULL) {
+		/* Panel option - can be panel name,
+		 * "bs" for board-switch, or number/index */
+		if (!strncmp(this_opt, "panel:", 6)) {
+			int i;
+			long int li;
+			char *endptr;
+			this_opt += 6;
+			/* First check for index, which allows
+			 * to short circuit this mess */
+			li = simple_strtol(this_opt, &endptr, 0);
+			if (*endptr == '\0')
+				panel_idx = (int)li;
+			else if (strcmp(this_opt, "bs") == 0)
+				panel_idx = pd->panel_index();
+			else {
+				for (i = 0; i < num_panels; i++) {
+					if (!strcmp(this_opt,
+						    known_lcd_panels[i].name)) {
+						panel_idx = i;
+						break;
+					}
+				}
+			}
+			if ((panel_idx < 0) || (panel_idx >= num_panels))
+				print_warn("Panel %s not supported!", this_opt);
+			else
+				panel_index = panel_idx;
+
+		} else if (strncmp(this_opt, "nohwcursor", 10) == 0)
+			nohwcursor = 1;
+		else if (strncmp(this_opt, "devices:", 8) == 0) {
+			this_opt += 8;
+			device_count = simple_strtol(this_opt, &endptr, 0);
+			if ((device_count < 0) ||
+			    (device_count > MAX_DEVICE_COUNT))
+				device_count = MAX_DEVICE_COUNT;
+		} else if (strncmp(this_opt, "wincfg:", 7) == 0) {
+			this_opt += 7;
+			window_index = simple_strtol(this_opt, &endptr, 0);
+			if ((window_index < 0) ||
+			    (window_index >= ARRAY_SIZE(windows)))
+				window_index = DEFAULT_WINDOW_INDEX;
+		} else if (strncmp(this_opt, "off", 3) == 0)
+			return 1;
+		else
+			print_warn("Unsupported option \"%s\"", this_opt);
+	}
+
+out:
+	return 0;
+}
+
+/* AU1200 LCD controller device driver */
 static int __devinit au1200fb_drv_probe(struct platform_device *dev)
 {
 	struct au1200fb_device *fbdev;
+	struct au1200fb_platdata *pd;
 	struct fb_info *fbi = NULL;
 	unsigned long page;
 	int bpp, plane, ret, irq;
 
+	print_info("" DRIVER_DESC "");
+
+	pd = dev->dev.platform_data;
+	if (!pd)
+		return -ENODEV;
+
+	/* Setup driver with options */
+	if (au1200fb_setup(pd))
+		return -ENODEV;
+
+	/* Point to the panel selected */
+	panel = &known_lcd_panels[panel_index];
+	win = &windows[window_index];
+
+	printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name);
+	printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name);
+
 	/* shut gcc up */
 	ret = 0;
 	fbdev = NULL;
 
-	/* Kickstart the panel */
-	au1200_setpanel(panel);
-
 	for (plane = 0; plane < device_count; ++plane) {
 		bpp = winbpp(win->w[plane].mode_winctrl1);
 		if (win->w[plane].xres == 0)
@@ -1619,6 +1717,7 @@ static int __devinit au1200fb_drv_probe(struct platform_device *dev)
 		_au1200fb_infos[plane] = fbi;
 		fbdev = fbi->par;
 		fbdev->fb_info = fbi;
+		fbdev->pd = pd;
 
 		fbdev->plane = plane;
 
@@ -1680,6 +1779,11 @@ static int __devinit au1200fb_drv_probe(struct platform_device *dev)
 		goto failed;
 	}
 
+	platform_set_drvdata(dev, pd);
+
+	/* Kickstart the panel */
+	au1200_setpanel(panel, pd);
+
 	return 0;
 
 failed:
@@ -1699,12 +1803,13 @@ failed:
 
 static int __devexit au1200fb_drv_remove(struct platform_device *dev)
 {
+	struct au1200fb_platdata *pd = platform_get_drvdata(dev);
 	struct au1200fb_device *fbdev;
 	struct fb_info *fbi;
 	int plane;
 
 	/* Turn off the panel */
-	au1200_setpanel(NULL);
+	au1200_setpanel(NULL, pd);
 
 	for (plane = 0; plane < device_count; ++plane)	{
 		fbi = _au1200fb_infos[plane];
@@ -1732,7 +1837,8 @@ static int __devexit au1200fb_drv_remove(struct platform_device *dev)
 #ifdef CONFIG_PM
 static int au1200fb_drv_suspend(struct device *dev)
 {
-	au1200_setpanel(NULL);
+	struct au1200fb_platdata *pd = dev_get_drvdata(dev);
+	au1200_setpanel(NULL, pd);
 
 	lcd->outmask = 0;
 	au_sync();
@@ -1742,11 +1848,12 @@ static int au1200fb_drv_suspend(struct device *dev)
 
 static int au1200fb_drv_resume(struct device *dev)
 {
+	struct au1200fb_platdata *pd = dev_get_drvdata(dev);
 	struct fb_info *fbi;
 	int i;
 
 	/* Kickstart the panel */
-	au1200_setpanel(panel);
+	au1200_setpanel(panel, pd);
 
 	for (i = 0; i < device_count; i++) {
 		fbi = _au1200fb_infos[i];
@@ -1781,100 +1888,8 @@ static struct platform_driver au1200fb_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-/* Kernel driver */
-
-static int au1200fb_setup(void)
-{
-	char *options = NULL;
-	char *this_opt, *endptr;
-	int num_panels = ARRAY_SIZE(known_lcd_panels);
-	int panel_idx = -1;
-
-	fb_get_options(DRIVER_NAME, &options);
-
-	if (options) {
-		while ((this_opt = strsep(&options,",")) != NULL) {
-			/* Panel option - can be panel name,
-			 * "bs" for board-switch, or number/index */
-			if (!strncmp(this_opt, "panel:", 6)) {
-				int i;
-				long int li;
-				char *endptr;
-				this_opt += 6;
-				/* First check for index, which allows
-				 * to short circuit this mess */
-				li = simple_strtol(this_opt, &endptr, 0);
-				if (*endptr == '\0') {
-					panel_idx = (int)li;
-				}
-				else if (strcmp(this_opt, "bs") == 0) {
-					extern int board_au1200fb_panel(void);
-					panel_idx = board_au1200fb_panel();
-				}
-
-				else
-				for (i = 0; i < num_panels; i++) {
-					if (!strcmp(this_opt, known_lcd_panels[i].name)) {
-						panel_idx = i;
-						break;
-					}
-				}
-
-				if ((panel_idx < 0) || (panel_idx >= num_panels)) {
-						print_warn("Panel %s not supported!", this_opt);
-				}
-				else
-					panel_index = panel_idx;
-			}
-
-			else if (strncmp(this_opt, "nohwcursor", 10) == 0) {
-				nohwcursor = 1;
-			}
-
-			else if (strncmp(this_opt, "devices:", 8) == 0) {
-				this_opt += 8;
-				device_count = simple_strtol(this_opt,
-							     &endptr, 0);
-				if ((device_count < 0) ||
-				    (device_count > MAX_DEVICE_COUNT))
-					device_count = MAX_DEVICE_COUNT;
-			}
-
-			else if (strncmp(this_opt, "wincfg:", 7) == 0) {
-				this_opt += 7;
-				window_index = simple_strtol(this_opt,
-							     &endptr, 0);
-				if ((window_index < 0) ||
-				    (window_index >= ARRAY_SIZE(windows)))
-					window_index = DEFAULT_WINDOW_INDEX;
-			}
-
-			else if (strncmp(this_opt, "off", 3) == 0)
-				return 1;
-			/* Unsupported option */
-			else {
-				print_warn("Unsupported option \"%s\"", this_opt);
-			}
-		}
-	}
-	return 0;
-}
-
 static int __init au1200fb_init(void)
 {
-	print_info("" DRIVER_DESC "");
-
-	/* Setup driver with options */
-	if (au1200fb_setup())
-		return -ENODEV;
-
-	/* Point to the panel selected */
-	panel = &known_lcd_panels[panel_index];
-	win = &windows[window_index];
-
-	printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name);
-	printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name);
-
 	return platform_driver_register(&au1200fb_driver);
 }