diff options
| author | Dave Airlie <airlied@redhat.com> | 2012-04-12 11:27:01 +0200 |
|---|---|---|
| committer | Dave Airlie <airlied@redhat.com> | 2012-04-12 11:27:01 +0200 |
| commit | effbc4fd8e37e41d6f2bb6bcc611c14b4fbdcf9b (patch) | |
| tree | 8bc2a6a2116f1031b0033bf1a8f9fbe92201c5c1 /drivers | |
| parent | drm/radeon/kms: attempt to avoid copying data twice on coherent cards. (v3) (diff) | |
| parent | drm/i915: VCS is not the last ring (diff) | |
| download | linux-effbc4fd8e37e41d6f2bb6bcc611c14b4fbdcf9b.tar.xz linux-effbc4fd8e37e41d6f2bb6bcc611c14b4fbdcf9b.zip | |
Merge branch 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next
Daniel Vetter wrote
First pull request for 3.5-next, slightly large than usual because new
things kept coming in since the last pull for 3.4.
Highlights:
- first batch of hw enablement for vlv (Jesse et al) and hsw (Eugeni). pci
ids are not yet added, and there's still quite a few patches to merge
(mostly modesetting). To make QA easier I've decided to merge this stuff
in pieces.
- loads of cleanups and prep patches spurred by the above. Especially vlv
is a real frankenstein chip, but also hsw is stretching our driver's
code design. Expect more to come in this area for 3.5.
- more gmbus fixes, cleanups and improvements by Daniel Kurtz. Again,
there are more patches needed (and some already queued up), but I wanted
to split this a bit for better testing.
- pwrite/pread rework and retuning. This series has been in the works for
a few months already and a lot of i-g-t tests have been created for it.
Now it's finally ready to be merged. Note that one patch in this series
touches include/pagemap.h, that patch is acked-by akpm.
- reduce mappable pressure and relocation throughput improvements from
Chris.
- mmap offset exhaustion mitigation by Chris Wilson.
- a start at figuring out which codepaths in our messy dri1/ums+gem/kms
driver we actually need to support by bailing out of unsupported case.
The driver now refuses to load without kms on gen6+ and disallows a few
ioctls that userspace never used in certain cases. More of this will
definitely come.
- More decoupling of global gtt and ppgtt.
- Improved dual-link lvds detection by Takashi Iwai.
- Shut up the compiler + plus fix the fallout (Ben)
- Inverted panel brightness handling (mostly Acer manages to break things
in this way).
- Small fixlets and adjustements and some minor things to help debugging.
Regression-wise QA reported quite a few issues on ivb, but all of them
turned out to be hw stability issues which are already fixed in
drm-intel-fixes (QA runs the nightly regression tests on -next alone,
without -fixes automatically merged in). There's still one issue open on
snb, it looks like occlusion query writes are not quite as cache coherent
as we've expected. With some of the pwrite adjustements we can now
reliably hit this. Kernel workaround for it is in the works."
* 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (101 commits)
drm/i915: VCS is not the last ring
drm/i915: Add a dual link lvds quirk for MacBook Pro 8,2
drm/i915: make quirks more verbose
drm/i915: dump the DMA fetch addr register on pre-gen6
drm/i915/sdvo: Include YRPB as an additional TV output type
drm/i915: disallow gem init ioctl on ilk
drm/i915: refuse to load on gen6+ without kms
drm/i915: extract gt interrupt handler
drm/i915: use render gen to switch ring irq functions
drm/i915: rip out old HWSTAM missed irq WA for vlv
drm/i915: open code gen6+ ring irqs
drm/i915: ring irq cleanups
drm/i915: add SFUSE_STRAP registers for digital port detection
drm/i915: add WM_LINETIME registers
drm/i915: add WRPLL clocks
drm/i915: add LCPLL control registers
drm/i915: add SSC offsets for SBI access
drm/i915: add port clock selection support for HSW
drm/i915: add S PLL control
drm/i915: add PIXCLK_GATE register
...
Conflicts:
drivers/char/agp/intel-agp.h
drivers/char/agp/intel-gtt.c
drivers/gpu/drm/i915/i915_debugfs.c
Diffstat (limited to 'drivers')
29 files changed, 2508 insertions, 1134 deletions
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 962e75dc4781..74c2d9274c53 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -907,6 +907,7 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_IVYBRIDGE_HB), ID(PCI_DEVICE_ID_INTEL_IVYBRIDGE_M_HB), ID(PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_HB), + ID(PCI_DEVICE_ID_INTEL_VALLEYVIEW_HB), { } }; diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h index 7ea18a5fe71c..c0091753a0d1 100644 --- a/drivers/char/agp/intel-agp.h +++ b/drivers/char/agp/intel-agp.h @@ -96,6 +96,7 @@ #define G4x_GMCH_SIZE_VT_2M (G4x_GMCH_SIZE_2M | G4x_GMCH_SIZE_VT_EN) #define GFX_FLSH_CNTL 0x2170 /* 915+ */ +#define GFX_FLSH_CNTL_VLV 0x101008 #define I810_DRAM_CTL 0x3000 #define I810_DRAM_ROW_0 0x00000001 @@ -235,6 +236,19 @@ #define PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_HB 0x0158 /* Server */ #define PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_GT1_IG 0x015A #define PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_GT2_IG 0x016A +#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_HB 0x0F00 /* VLV1 */ +#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_IG 0x0F30 +#define PCI_DEVICE_ID_INTEL_HASWELL_HB 0x0400 /* Desktop */ +#define PCI_DEVICE_ID_INTEL_HASWELL_D_GT1_IG 0x0402 +#define PCI_DEVICE_ID_INTEL_HASWELL_D_GT2_IG 0x0412 +#define PCI_DEVICE_ID_INTEL_HASWELL_M_HB 0x0404 /* Mobile */ +#define PCI_DEVICE_ID_INTEL_HASWELL_M_GT1_IG 0x0406 +#define PCI_DEVICE_ID_INTEL_HASWELL_M_GT2_IG 0x0416 +#define PCI_DEVICE_ID_INTEL_HASWELL_S_HB 0x0408 /* Server */ +#define PCI_DEVICE_ID_INTEL_HASWELL_S_GT1_IG 0x040a +#define PCI_DEVICE_ID_INTEL_HASWELL_S_GT2_IG 0x041a +#define PCI_DEVICE_ID_INTEL_HASWELL_SDV 0x0c16 /* SDV */ +#define PCI_DEVICE_ID_INTEL_HASWELL_E_HB 0x0c04 int intel_gmch_probe(struct pci_dev *pdev, struct agp_bridge_data *bridge); diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 7f025fb620de..1237e7575c3f 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1179,6 +1179,20 @@ static void gen6_write_entry(dma_addr_t addr, unsigned int entry, writel(addr | pte_flags, intel_private.gtt + entry); } +static void valleyview_write_entry(dma_addr_t addr, unsigned int entry, + unsigned int flags) +{ + u32 pte_flags; + + pte_flags = GEN6_PTE_UNCACHED | I810_PTE_VALID; + + /* gen6 has bit11-4 for physical addr bit39-32 */ + addr |= (addr >> 28) & 0xff0; + writel(addr | pte_flags, intel_private.gtt + entry); + + writel(1, intel_private.registers + GFX_FLSH_CNTL_VLV); +} + static void gen6_cleanup(void) { } @@ -1205,12 +1219,16 @@ static inline int needs_idle_maps(void) static int i9xx_setup(void) { u32 reg_addr; + int size = KB(512); pci_read_config_dword(intel_private.pcidev, I915_MMADDR, ®_addr); reg_addr &= 0xfff80000; - intel_private.registers = ioremap(reg_addr, 128 * 4096); + if (INTEL_GTT_GEN >= 7) + size = MB(2); + + intel_private.registers = ioremap(reg_addr, size); if (!intel_private.registers) return -ENOMEM; @@ -1354,6 +1372,15 @@ static const struct intel_gtt_driver sandybridge_gtt_driver = { .check_flags = gen6_check_flags, .chipset_flush = i9xx_chipset_flush, }; +static const struct intel_gtt_driver valleyview_gtt_driver = { + .gen = 7, + .setup = i9xx_setup, + .cleanup = gen6_cleanup, + .write_entry = valleyview_write_entry, + .dma_mask_size = 40, + .check_flags = gen6_check_flags, + .chipset_flush = i9xx_chipset_flush, +}; /* Table to describe Intel GMCH and AGP/PCIE GART drivers. At least one of * driver and gmch_driver must be non-null, and find_gmch will determine @@ -1460,6 +1487,22 @@ static const struct intel_gtt_driver_description { "Ivybridge", &sandybridge_gtt_driver }, { PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_GT2_IG, "Ivybridge", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_VALLEYVIEW_IG, + "ValleyView", &valleyview_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_D_GT1_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_D_GT2_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_M_GT1_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_M_GT2_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_S_GT1_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_S_GT2_IG, + "Haswell", &sandybridge_gtt_driver }, + { PCI_DEVICE_ID_INTEL_HASWELL_SDV, + "Haswell", &sandybridge_gtt_driver }, { 0, NULL, NULL } }; diff --git a/drivers/gpu/drm/drm_cache.c b/drivers/gpu/drm/drm_cache.c index 4b8653b932f9..08758e061478 100644 --- a/drivers/gpu/drm/drm_cache.c +++ b/drivers/gpu/drm/drm_cache.c @@ -98,3 +98,26 @@ drm_clflush_pages(struct page *pages[], unsigned long num_pages) #endif } EXPORT_SYMBOL(drm_clflush_pages); + +void +drm_clflush_virt_range(char *addr, unsigned long length) +{ +#if defined(CONFIG_X86) + if (cpu_has_clflush) { + char *end = addr + length; + mb(); + for (; addr < end; addr += boot_cpu_data.x86_clflush_size) + clflush(addr); + clflush(end - 1); + mb(); + return; + } + + if (on_each_cpu(drm_clflush_ipi_handler, NULL, 1) != 0) + printk(KERN_ERR "Timed out waiting for cache flush.\n"); +#else + printk(KERN_ERR "Architecture has no drm_cache.c support\n"); + WARN_ON_ONCE(1); +#endif +} +EXPORT_SYMBOL(drm_clflush_virt_range); diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index b505b70dba05..967fb928c577 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -468,7 +468,45 @@ static int i915_interrupt_info(struct seq_file *m, void *data) if (ret) return ret; - if (!HAS_PCH_SPLIT(dev)) { + if (IS_VALLEYVIEW(dev)) { + seq_printf(m, "Display IER:\t%08x\n", + I915_READ(VLV_IER)); + seq_printf(m, "Display IIR:\t%08x\n", + I915_READ(VLV_IIR)); + seq_printf(m, "Display IIR_RW:\t%08x\n", + I915_READ(VLV_IIR_RW)); + seq_printf(m, "Display IMR:\t%08x\n", + I915_READ(VLV_IMR)); + for_each_pipe(pipe) + seq_printf(m, "Pipe %c stat:\t%08x\n", + pipe_name(pipe), + I915_READ(PIPESTAT(pipe))); + + seq_printf(m, "Master IER:\t%08x\n", + I915_READ(VLV_MASTER_IER)); + + seq_printf(m, "Render IER:\t%08x\n", + I915_READ(GTIER)); + seq_printf(m, "Render IIR:\t%08x\n", + I915_READ(GTIIR)); + seq_printf(m, "Render IMR:\t%08x\n", + I915_READ(GTIMR)); + + seq_printf(m, "PM IER:\t\t%08x\n", + I915_READ(GEN6_PMIER)); + seq_printf(m, "PM IIR:\t\t%08x\n", + I915_READ(GEN6_PMIIR)); + seq_printf(m, "PM IMR:\t\t%08x\n", + I915_READ(GEN6_PMIMR)); + + seq_printf(m, "Port hotplug:\t%08x\n", + I915_READ(PORT_HOTPLUG_EN)); + seq_printf(m, "DPFLIPSTAT:\t%08x\n", + I915_READ(VLV_DPFLIPSTAT)); + seq_printf(m, "DPINVGTT:\t%08x\n", + I915_READ(DPINVGTT)); + + } else if (!HAS_PCH_SPLIT(dev)) { seq_printf(m, "Interrupt enable: %08x\n", I915_READ(IER)); seq_printf(m, "Interrupt identity: %08x\n", @@ -704,6 +742,7 @@ static void i915_ring_error_state(struct seq_file *m, struct drm_i915_error_state *error, unsigned ring) { + BUG_ON(ring >= I915_NUM_RINGS); /* shut up confused gcc */ seq_printf(m, "%s command stream:\n", ring_str(ring)); seq_printf(m, " HEAD: 0x%08x\n", error->head[ring]); seq_printf(m, " TAIL: 0x%08x\n", error->tail[ring]); @@ -718,8 +757,8 @@ static void i915_ring_error_state(struct seq_file *m, if (INTEL_INFO(dev)->gen >= 4) seq_printf(m, " INSTPS: 0x%08x\n", error->instps[ring]); seq_printf(m, " INSTPM: 0x%08x\n", error->instpm[ring]); + seq_printf(m, " FADDR: 0x%08x\n", error->faddr[ring]); if (INTEL_INFO(dev)->gen >= 6) { - seq_printf(m, " FADDR: 0x%08x\n", error->faddr[ring]); seq_printf(m, " FAULT_REG: 0x%08x\n", error->fault_reg[ring]); seq_printf(m, " SYNC_0: 0x%08x\n", error->semaphore_mboxes[ring][0]); @@ -1502,6 +1541,53 @@ static int i915_ppgtt_info(struct seq_file *m, void *data) return 0; } +static int i915_dpio_info(struct seq_file *m, void *data) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int ret; + + + if (!IS_VALLEYVIEW(dev)) { + seq_printf(m, "unsupported\n"); + return 0; + } + + ret = mutex_lock_interruptible(&dev->mode_config.mutex); + if (ret) + return ret; + + seq_printf(m, "DPIO_CTL: 0x%08x\n", I915_READ(DPIO_CTL)); + + seq_printf(m, "DPIO_DIV_A: 0x%08x\n", + intel_dpio_read(dev_priv, _DPIO_DIV_A)); + seq_printf(m, "DPIO_DIV_B: 0x%08x\n", + intel_dpio_read(dev_priv, _DPIO_DIV_B)); + + seq_printf(m, "DPIO_REFSFR_A: 0x%08x\n", + intel_dpio_read(dev_priv, _DPIO_REFSFR_A)); + seq_printf(m, "DPIO_REFSFR_B: 0x%08x\n", + intel_dpio_read(dev_priv, _DPIO_REFSFR_B)); + + seq_printf(m, "DPIO_CORE_CLK_A: 0x%08x\n", + intel_dpio_read(dev_priv, _DPIO_CORE_CLK_A)); + seq_printf(m, "DPIO_CORE_CLK_B: 0x%08x\n", + intel_dpio_read(dev_priv, _DPIO_CORE_CLK_B)); + + seq_printf(m, "DPIO_LFP_COEFF_A: 0x%08x\n", + intel_dpio_read(dev_priv, _DPIO_LFP_COEFF_A)); + seq_printf(m, "DPIO_LFP_COEFF_B: 0x%08x\n", + intel_dpio_read(dev_priv, _DPIO_LFP_COEFF_B)); + + seq_printf(m, "DPIO_FASTCLK_DISABLE: 0x%08x\n", + intel_dpio_read(dev_priv, DPIO_FASTCLK_DISABLE)); + + mutex_unlock(&dev->mode_config.mutex); + + return 0; +} + static ssize_t i915_wedged_read(struct file *filp, char __user *ubuf, @@ -1836,6 +1922,7 @@ static struct drm_info_list i915_debugfs_list[] = { {"i915_gen6_forcewake_count", i915_gen6_forcewake_count_info, 0}, {"i915_swizzle_info", i915_swizzle_info, 0}, {"i915_ppgtt_info", i915_ppgtt_info, 0}, + {"i915_dpio", i915_dpio_info, 0}, }; #define I915_DEBUGFS_ENTRIES ARRAY_SIZE(i915_debugfs_list) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 785f67f963ef..652f43f00ef2 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -26,6 +26,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "drmP.h" #include "drm.h" #include "drm_crtc_helper.h" @@ -43,6 +45,7 @@ #include <linux/slab.h> #include <linux/module.h> #include <acpi/video.h> +#include <asm/pat.h> static void i915_write_hws_pga(struct drm_device *dev) { @@ -787,6 +790,9 @@ static int i915_getparam(struct drm_device *dev, void *data, case I915_PARAM_HAS_LLC: value = HAS_LLC(dev); break; + case I915_PARAM_HAS_ALIASING_PPGTT: + value = dev_priv->mm.aliasing_ppgtt ? 1 : 0; + break; default: DRM_DEBUG_DRIVER("Unknown parameter %d\n", param->param); @@ -1158,14 +1164,14 @@ static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_ struct drm_device *dev = pci_get_drvdata(pdev); pm_message_t pmm = { .event = PM_EVENT_SUSPEND }; if (state == VGA_SWITCHEROO_ON) { - printk(KERN_INFO "i915: switched on\n"); + pr_info("switched on\n"); dev->switch_power_state = DRM_SWITCH_POWER_CHANGING; /* i915 resume handler doesn't set to D0 */ pci_set_power_state(dev->pdev, PCI_D0); i915_resume(dev); dev->switch_power_state = DRM_SWITCH_POWER_ON; } else { - printk(KERN_ERR "i915: switched off\n"); + pr_err("switched off\n"); dev->switch_power_state = DRM_SWITCH_POWER_CHANGING; i915_suspend(dev, pmm); dev->switch_power_state = DRM_SWITCH_POWER_OFF; @@ -1216,10 +1222,8 @@ static int i915_load_gem_init(struct drm_device *dev) /* PPGTT pdes are stolen from global gtt ptes, so shrink the * aperture accordingly when using aliasing ppgtt. */ gtt_size -= I915_PPGTT_PD_ENTRIES*PAGE_SIZE; - /* For paranoia keep the guard page in between. */ - gtt_size -= PAGE_SIZE; - i915_gem_do_init(dev, 0, mappable_size, gtt_size); + i915_gem_init_global_gtt(dev, 0, mappable_size, gtt_size); ret = i915_gem_init_aliasing_ppgtt(dev); if (ret) { @@ -1237,7 +1241,8 @@ static int i915_load_gem_init(struct drm_device *dev) * should be enough to keep any prefetching inside of the * aperture. */ - i915_gem_do_init(dev, 0, mappable_size, gtt_size - PAGE_SIZE); + i915_gem_init_global_gtt(dev, 0, mappable_size, + gtt_size); } ret = i915_gem_init_hw(dev); @@ -1931,6 +1936,29 @@ ips_ping_for_i915_load(void) } } +static void +i915_mtrr_setup(struct drm_i915_private *dev_priv, unsigned long base, + unsigned long size) +{ + dev_priv->mm.gtt_mtrr = -1; + +#if defined(CONFIG_X86_PAT) + if (cpu_has_pat) + return; +#endif + + /* Set up a WC MTRR for non-PAT systems. This is more common than + * one would think, because the kernel disables PAT on first + * generation Core chips because WC PAT gets overridden by a UC + * MTRR if present. Even if a UC MTRR isn't present. + */ + dev_priv->mm.gtt_mtrr = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1); + if (dev_priv->mm.gtt_mtrr < 0) { + DRM_INFO("MTRR allocation failed. Graphics " + "performance may suffer.\n"); + } +} + /** * i915_driver_load - setup chip and create an initial config * @dev: DRM device @@ -1945,8 +1973,16 @@ ips_ping_for_i915_load(void) int i915_driver_load(struct drm_device *dev, unsigned long flags) { struct drm_i915_private *dev_priv; + struct intel_device_info *info; int ret = 0, mmio_bar; - uint32_t agp_size; + uint32_t aperture_size; + + info = (struct intel_device_info *) flags; + + /* Refuse to load on gen6+ without kms enabled. */ + if (info->gen >= 6 && !drm_core_check_feature(dev, DRIVER_MODESET)) + return -ENODEV; + /* i915 has 4 more counters */ dev->counters += 4; @@ -1961,7 +1997,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) dev->dev_private = (void *)dev_priv; dev_priv->dev = dev; - dev_priv->info = (struct intel_device_info *) flags; + dev_priv->info = info; if (i915_get_bridge_dev(dev)) { ret = -EIO; @@ -2000,27 +2036,16 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) goto out_rmmap; } - agp_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT; + aperture_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT; dev_priv->mm.gtt_mapping = - io_mapping_create_wc(dev->agp->base, agp_size); + io_mapping_create_wc(dev->agp->base, aperture_size); if (dev_priv->mm.gtt_mapping == NULL) { ret = -EIO; goto out_rmmap; } - /* Set up a WC MTRR for non-PAT systems. This is more common than - * one would think, because the kernel disables PAT on first - * generation Core chips because WC PAT gets overridden by a UC - * MTRR if present. Even if a UC MTRR isn't present. - */ - dev_priv->mm.gtt_mtrr = mtrr_add(dev->agp->base, - agp_size, - MTRR_TYPE_WRCOMB, 1); - if (dev_priv->mm.gtt_mtrr < 0) { - DRM_INFO("MTRR allocation failed. Graphics " - "performance may suffer.\n"); - } + i915_mtrr_setup(dev_priv, dev->agp->base, aperture_size); /* The i915 workqueue is primarily used for batched retirement of * requests (and thus managing bo) once the task has been completed @@ -2272,7 +2297,7 @@ int i915_driver_open(struct drm_device *dev, struct drm_file *file) * mode setting case, we want to restore the kernel's initial mode (just * in case the last client left us in a bad state). * - * Additionally, in the non-mode setting case, we'll tear down the AGP + * Additionally, in the non-mode setting case, we'll tear down the GTT * and DMA structures, since the kernel won't be using them, and clea * up any GEM state. */ @@ -2350,16 +2375,10 @@ struct drm_ioctl_desc i915_ioctls[] = { int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls); -/** - * Determine if the device really is AGP or not. - * - * All Intel graphics chipsets are treated as AGP, even if they are really - * PCI-e. - * - * \param dev The device to be tested. - * - * \returns - * A value of 1 is always retured to indictate every i9x5 is AGP. +/* + * This is really ugly: Because old userspace abused the linux agp interface to + * manage the gtt, we need to claim that all intel devices are agp. For + * otherwise the drm core refuses to initialize the agp support code. */ int i915_driver_device_is_agp(struct drm_device * dev) { diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index dfa55e7478fb..c33b0a41a73d 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -84,6 +84,12 @@ MODULE_PARM_DESC(lvds_downclock, "Use panel (LVDS/eDP) downclocking for power savings " "(default: false)"); +int i915_lvds_channel_mode __read_mostly; +module_param_named(lvds_channel_mode, i915_lvds_channel_mode, int, 0600); +MODULE_PARM_DESC(lvds_channel_mode, + "Specify LVDS channel mode " + "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)"); + int i915_panel_use_ssc __read_mostly = -1; module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600); MODULE_PARM_DESC(lvds_use_ssc, @@ -93,8 +99,8 @@ MODULE_PARM_DESC(lvds_use_ssc, int i915_vbt_sdvo_panel_type __read_mostly = -1; module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600); MODULE_PARM_DESC(vbt_sdvo_panel_type, - "Override selection of SDVO panel mode in the VBT " - "(default: auto)"); + "Override/Ignore selection of SDVO panel mode in the VBT " + "(-2=ignore, -1=auto [default], index in VBT BIOS table)"); static bool i915_try_reset __read_mostly = true; module_param_named(reset, i915_try_reset, bool, 0600); @@ -209,6 +215,7 @@ static const struct intel_device_info intel_ironlake_d_info = { .gen = 5, .need_gfx_hws = 1, .has_hotplug = 1, .has_bsd_ring = 1, + .has_pch_split = 1, }; static const struct intel_device_info intel_ironlake_m_info = { @@ -216,6 +223,7 @@ static const struct intel_device_info intel_ironlake_m_info = { .need_gfx_hws = 1, .has_hotplug = 1, .has_fbc = 1, .has_bsd_ring = 1, + .has_pch_split = 1, }; static const struct intel_device_info intel_sandybridge_d_info = { @@ -224,6 +232,7 @@ static const struct intel_device_info intel_sandybridge_d_info = { .has_bsd_ring = 1, .has_blt_ring = 1, .has_llc = 1, + .has_pch_split = 1, }; static const struct intel_device_info intel_sandybridge_m_info = { @@ -233,6 +242,7 @@ static const struct intel_device_info intel_sandybridge_m_info = { .has_bsd_ring = 1, .has_blt_ring = 1, .has_llc = 1, + .has_pch_split = 1, }; static const struct intel_device_info intel_ivybridge_d_info = { @@ -241,6 +251,7 @@ static const struct intel_device_info intel_ivybridge_d_info = { .has_bsd_ring = 1, .has_blt_ring = 1, .has_llc = 1, + .has_pch_split = 1, }; static const struct intel_device_info intel_ivybridge_m_info = { @@ -250,6 +261,43 @@ static const struct intel_device_info intel_ivybridge_m_info = { .has_bsd_ring = 1, .has_blt_ring = 1, .has_llc = 1, + .has_pch_split = 1, +}; + +static const struct intel_device_info intel_valleyview_m_info = { + .gen = 7, .is_mobile = 1, + .need_gfx_hws = 1, .has_hotplug = 1, + .has_fbc = 0, + .has_bsd_ring = 1, + .has_blt_ring = 1, + .is_valleyview = 1, +}; + +static const struct intel_device_info intel_valleyview_d_info = { + .gen = 7, + .need_gfx_hws = 1, .has_hotplug = 1, + .has_fbc = 0, + .has_bsd_ring = 1, + .has_blt_ring = 1, + .is_valleyview = 1, +}; + +static const struct intel_device_info intel_haswell_d_info = { + .is_haswell = 1, .gen = 7, + .need_gfx_hws = 1, .has_hotplug = 1, + .has_bsd_ring = 1, + .has_blt_ring = 1, + .has_llc = 1, + .has_pch_split = 1, +}; + +static const struct intel_device_info intel_haswell_m_info = { + .is_haswell = 1, .gen = 7, .is_mobile = 1, + .need_gfx_hws = 1, .has_hotplug = 1, + .has_bsd_ring = 1, + .has_blt_ring = 1, + .has_llc = 1, + .has_pch_split = 1, }; static const struct pci_device_id pciidlist[] = { /* aka */ @@ -308,6 +356,7 @@ MODULE_DEVICE_TABLE(pci, pciidlist); #define INTEL_PCH_IBX_DEVICE_ID_TYPE 0x3b00 #define INTEL_PCH_CPT_DEVICE_ID_TYPE 0x1c00 #define INTEL_PCH_PPT_DEVICE_ID_TYPE 0x1e00 +#define INTEL_PCH_LPT_DEVICE_ID_TYPE 0x8c00 void intel_detect_pch(struct drm_device *dev) { @@ -336,6 +385,9 @@ void intel_detect_pch(struct drm_device *dev) /* PantherPoint is CPT compatible */ dev_priv->pch_type = PCH_CPT; DRM_DEBUG_KMS("Found PatherPoint PCH\n"); + } else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) { + dev_priv->pch_type = PCH_LPT; + DRM_DEBUG_KMS("Found LynxPoint PCH\n"); } } pci_dev_put(pch); @@ -446,6 +498,31 @@ int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv) return ret; } +void vlv_force_wake_get(struct drm_i915_private *dev_priv) +{ + int count; + + count = 0; + + /* Already awake? */ + if ((I915_READ(0x130094) & 0xa1) == 0xa1) + return; + + I915_WRITE_NOTRACE(FORCEWAKE_VLV, 0xffffffff); + POSTING_READ(FORCEWAKE_VLV); + + count = 0; + while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1) == 0) + udelay(10); +} + +void vlv_force_wake_put(struct drm_i915_private *dev_priv) +{ + I915_WRITE_NOTRACE(FORCEWAKE_VLV, 0xffff0000); + /* FIXME: confirm VLV behavior with Punit folks */ + POSTING_READ(FORCEWAKE_VLV); +} + static int i915_drm_freeze(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -993,6 +1070,13 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL and additional rights"); +/* We give fast paths for the really cool registers */ +#define NEEDS_FORCE_WAKE(dev_priv, reg) \ + (((dev_priv)->info->gen >= 6) && \ + ((reg) < 0x40000) && \ + ((reg) != FORCEWAKE)) && \ + (!IS_VALLEYVIEW((dev_priv)->dev)) + #define __i915_read(x, y) \ u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \ u##x val = 0; \ diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 5fabc6c31fec..92e496afc6f4 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -63,6 +63,16 @@ enum plane { }; #define plane_name(p) ((p) + 'A') +enum port { + PORT_A = 0, + PORT_B, + PORT_C, + PORT_D, + PORT_E, + I915_MAX_PORTS +}; +#define port_name(p) ((p) + 'A') + #define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) #define for_each_pipe(p) for ((p) = 0; (p) < dev_priv->num_pipe; (p)++) @@ -255,6 +265,9 @@ struct intel_device_info { u8 is_broadwater:1; u8 is_crestline:1; u8 is_ivybridge:1; + u8 is_valleyview:1; + u8 has_pch_split:1; + u8 is_haswell:1; u8 has_fbc:1; u8 has_pipe_cxsr:1; u8 has_hotplug:1; @@ -291,10 +304,12 @@ enum no_fbc_reason { enum intel_pch { PCH_IBX, /* Ibexpeak PCH */ PCH_CPT, /* Cougarpoint PCH */ + PCH_LPT, /* Lynxpoint PCH */ }; #define QUIRK_PIPEA_FORCE (1<<0) #define QUIRK_LVDS_SSC_DISABLE (1<<1) +#define QUIRK_INVERT_BRIGHTNESS (1<<2) struct intel_fbdev; struct intel_fbc_work; @@ -302,7 +317,6 @@ struct intel_fbc_work; struct intel_gmbus { struct i2c_adapter adapter; bool force_bit; - bool has_gpio; u32 reg0; u32 gpio_reg; struct i2c_algo_bit_data bit_algo; @@ -326,12 +340,17 @@ typedef struct drm_i915_private { /** gt_lock is also taken in irq contexts. */ struct spinlock gt_lock; - struct intel_gmbus *gmbus; + struct intel_gmbus gmbus[GMBUS_NUM_PORTS]; /** gmbus_mutex protects against concurrent usage of the single hw gmbus * controller on different i2c buses. */ struct mutex gmbus_mutex; + /** + * Base address of the gmbus and gpio block. + */ + uint32_t gpio_mmio_base; + struct pci_dev *bridge_dev; struct intel_ring_buffer ring[I915_NUM_RINGS]; uint32_t next_seqno; @@ -354,6 +373,10 @@ typedef struct drm_i915_private { /* protects the irq masks */ spinlock_t irq_lock; + + /* DPIO indirect register protection */ + spinlock_t dpio_lock; + /** Cached value of IMR to avoid reads in updating the bitfield */ u32 pipestat[2]; u32 irq_mask; @@ -405,6 +428,8 @@ typedef struct drm_i915_private { unsigned int lvds_use_ssc:1; unsigned int display_clock_mode:1; int lvds_ssc_freq; + unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */ + unsigned int lvds_val; /* used for checking LVDS channel mode */ struct { int rate; int lanes; @@ -881,6 +906,7 @@ struct drm_i915_gem_object { unsigned int cache_level:2; unsigned int has_aliasing_ppgtt_mapping:1; + unsigned int has_global_gtt_mapping:1; struct page **pages; @@ -918,13 +944,6 @@ struct drm_i915_gem_object { /** Record of address bit 17 of each page at last unbind. */ unsigned long *bit_17; - - /** - * If present, while GEM_DOMAIN_CPU is in the read domain this array - * flags which individual pages are valid. - */ - uint8_t *page_cpu_valid; - /** User space pin count and filp owning the pin */ uint32_t user_pin_count; struct drm_file *pin_filp; @@ -1001,6 +1020,8 @@ struct drm_i915_file_private { #define IS_IRONLAKE_D(dev) ((dev)->pci_device == 0x0042) #define IS_IRONLAKE_M(dev) ((dev)->pci_device == 0x0046) #define IS_IVYBRIDGE(dev) (INTEL_INFO(dev)->is_ivybridge) +#define IS_VALLEYVIEW(dev) (INTEL_INFO(dev)->is_valleyview) +#define IS_HASWELL(dev) (INTEL_INFO(dev)->is_haswell) #define IS_MOBILE(dev) (INTEL_INFO(dev)->is_mobile) /* @@ -1044,10 +1065,11 @@ struct drm_i915_file_private { #define HAS_PIPE_CXSR(dev) (INTEL_INFO(dev)->has_pipe_cxsr) #define I915_HAS_FBC(dev) (INTEL_INFO(dev)->has_fbc) -#define HAS_PCH_SPLIT(dev) (IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev)) +#define HAS_PCH_SPLIT(dev) (INTEL_INFO(dev)->has_pch_split) #define HAS_PIPE_CONTROL(dev) (INTEL_INFO(dev)->gen >= 5) #define INTEL_PCH_TYPE(dev) (((struct drm_i915_private *)(dev)->dev_private)->pch_type) +#define HAS_PCH_LPT(dev) (INTEL_PCH_TYPE(dev) == PCH_LPT) #define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT) #define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX) @@ -1081,6 +1103,7 @@ extern int i915_panel_ignore_lid __read_mostly; extern unsigned int i915_powersave __read_mostly; extern int i915_semaphores __read_mostly; extern unsigned int i915_lvds_downclock __read_mostly; +extern int i915_lvds_channel_mode __read_mostly; extern int i915_panel_use_ssc __read_mostly; extern int i915_vbt_sdvo_panel_type __read_mostly; extern int i915_enable_rc6 __read_mostly; @@ -1264,10 +1287,6 @@ int __must_check i915_gem_init_hw(struct drm_device *dev); void i915_gem_init_swizzling(struct drm_device *dev); void i915_gem_init_ppgtt(struct drm_device *dev); void i915_gem_cleanup_ringbuffer(struct drm_device *dev); -void i915_gem_do_init(struct drm_device *dev, - unsigned long start, - unsigned long mappable_end, - unsigned long end); int __must_check i915_gpu_idle(struct drm_device *dev, bool do_retire); int __must_check i915_gem_idle(struct drm_device *dev); int __must_check i915_add_request(struct intel_ring_buffer *ring, @@ -1281,6 +1300,8 @@ int __must_check i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj, bool write); int __must_check +i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write); +int __must_check i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, u32 alignment, struct intel_ring_buffer *pipelined); @@ -1311,10 +1332,15 @@ void i915_ppgtt_unbind_object(struct i915_hw_ppgtt *ppgtt, struct drm_i915_gem_object *obj); void i915_gem_restore_gtt_mappings(struct drm_device *dev); -int __must_check i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj); -void i915_gem_gtt_rebind_object(struct drm_i915_gem_object *obj, +int __must_check i915_gem_gtt_prepare_object(struct drm_i915_gem_object *obj); +void i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj, enum i915_cache_level cache_level); void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj); +void i915_gem_gtt_finish_object(struct drm_i915_gem_object *obj); +void i915_gem_init_global_gtt(struct drm_device *dev, + unsigned long start, + unsigned long mappable_end, + unsigned long end); /* i915_gem_evict.c */ int __must_check i915_gem_evict_something(struct drm_device *dev, int min_size, @@ -1357,6 +1383,13 @@ extern int i915_restore_state(struct drm_device *dev); /* intel_i2c.c */ extern int intel_setup_gmbus(struct drm_device *dev); extern void intel_teardown_gmbus(struct drm_device *dev); +extern inline bool intel_gmbus_is_port_valid(unsigned port) +{ + return (port >= GMBUS_PORT_SSC && port <= GMBUS_PORT_DPD); +} + +extern struct i2c_adapter *intel_gmbus_get_adapter( + struct drm_i915_private *dev_priv, unsigned port); extern void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed); extern void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit); extern inline bool intel_gmbus_is_forced_bit(struct i2c_adapter *adapter) @@ -1409,6 +1442,9 @@ extern void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv); extern void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv); extern void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv); +extern void vlv_force_wake_get(struct drm_i915_private *dev_priv); +extern void vlv_force_wake_put(struct drm_i915_private *dev_priv); + /* overlay */ #ifdef CONFIG_DEBUG_FS extern struct intel_overlay_error_state *intel_overlay_capture_error_state(struct drm_device *dev); @@ -1450,12 +1486,6 @@ void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv); void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv); int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv); -/* We give fast paths for the really cool registers */ -#define NEEDS_FORCE_WAKE(dev_priv, reg) \ - (((dev_priv)->info->gen >= 6) && \ - ((reg) < 0x40000) && \ - ((reg) != FORCEWAKE)) - #define __i915_read(x, y) \ u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 4c65c639f772..b851bd34ca18 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -39,12 +39,6 @@ static __must_check int i915_gem_object_flush_gpu_write_domain(struct drm_i915_gem_object *obj); static void i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj); static void i915_gem_object_flush_cpu_write_domain(struct drm_i915_gem_object *obj); -static __must_check int i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, - bool write); -static __must_check int i915_gem_object_set_cpu_read_domain_range(struct drm_i915_gem_object *obj, - uint64_t offset, - uint64_t size); -static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_i915_gem_object *obj); static __must_check int i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj, unsigned alignment, bool map_and_fenceable); @@ -125,25 +119,6 @@ i915_gem_object_is_inactive(struct drm_i915_gem_object *obj) return obj->gtt_space && !obj->active && obj->pin_count == 0; } -void i915_gem_do_init(struct drm_device *dev, - unsigned long start, - unsigned long mappable_end, - unsigned long end) -{ - drm_i915_private_t *dev_priv = dev->dev_private; - - drm_mm_init(&dev_priv->mm.gtt_space, start, end - start); - - dev_priv->mm.gtt_start = start; - dev_priv->mm.gtt_mappable_end = mappable_end; - dev_priv->mm.gtt_end = end; - dev_priv->mm.gtt_total = end - start; - dev_priv->mm.mappable_gtt_total = min(end, mappable_end) - start; - - /* Take over this portion of the GTT */ - intel_gtt_clear_range(start / PAGE_SIZE, (end-start) / PAGE_SIZE); -} - int i915_gem_init_ioctl(struct drm_device *dev, void *data, struct drm_file *file) @@ -154,8 +129,13 @@ i915_gem_init_ioctl(struct drm_device *dev, void *data, (args->gtt_end | args->gtt_start) & (PAGE_SIZE - 1)) return -EINVAL; + /* GEM with user mode setting was never supported on ilk and later. */ + if (INTEL_INFO(dev)->gen >= 5) + return -ENODEV; + mutex_lock(&dev->struct_mutex); - i915_gem_do_init(dev, args->gtt_start, args->gtt_end, args->gtt_end); + i915_gem_init_global_gtt(dev, args->gtt_start, + args->gtt_end, args->gtt_end); mutex_unlock(&dev->struct_mutex); return 0; @@ -259,66 +239,6 @@ static int i915_gem_object_needs_bit17_swizzle(struct drm_i915_gem_object *obj) obj->tiling_mode != I915_TILING_NONE; } -/** - * This is the fast shmem pread path, which attempts to copy_from_user directly - * from the backing pages of the object to the user's address space. On a - * fault, it fails so we can fall back to i915_gem_shmem_pwrite_slow(). - */ -static int -i915_gem_shmem_pread_fast(struct drm_device *dev, - struct drm_i915_gem_object *obj, - struct drm_i915_gem_pread *args, - struct drm_file *file) -{ - struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping; - ssize_t remain; - loff_t offset; - char __user *user_data; - int page_offset, page_length; - - user_data = (char __user *) (uintptr_t) args->data_ptr; - remain = args->size; - - offset = args->offset; - - while (remain > 0) { - struct page *page; - char *vaddr; - int ret; - - /* Operation in this page - * - * page_offset = offset within page - * page_length = bytes to copy for this page - */ - page_offset = offset_in_page(offset); - page_length = remain; - if ((page_offset + remain) > PAGE_SIZE) - page_length = PAGE_SIZE - page_offset; - - page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); - if (IS_ERR(page)) - return PTR_ERR(page); - - vaddr = kmap_atomic(page); - ret = __copy_to_user_inatomic(user_data, - vaddr + page_offset, - page_length); - kunmap_atomic(vaddr); - - mark_page_accessed(page); - page_cache_release(page); - if (ret) - return -EFAULT; - - remain -= page_length; - user_data += page_length; - offset += page_length; - } - - return 0; -} - static inline int __copy_to_user_swizzled(char __user *cpu_vaddr, const char *gpu_vaddr, int gpu_offset, @@ -371,37 +291,121 @@ __copy_from_user_swizzled(char __user *gpu_vaddr, int gpu_offset, return 0; } -/** - * This is the fallback shmem pread path, which allocates temporary storage - * in kernel space to copy_to_user into outside of the struct_mutex, so we - * can copy out of the object's backing pages while holding the struct mutex - * and not take page faults. - */ +/* Per-page copy function for the shmem pread fastpath. + * Flushes invalid cachelines before reading the target if + * needs_clflush is set. */ static int -i915_gem_shmem_pread_slow(struct drm_device *dev, - struct drm_i915_gem_object *obj, - struct drm_i915_gem_pread *args, - struct drm_file *file) +shmem_pread_fast(struct page *page, int shmem_page_offset, int page_length, + char __user *user_data, + bool page_do_bit17_swizzling, bool needs_clflush) +{ + char *vaddr; + int ret; + + if (unlikely(page_do_bit17_swizzling)) + return -EINVAL; + + vaddr = kmap_atomic(page); + if (needs_clflush) + drm_clflush_virt_range(vaddr + shmem_page_offset, + page_length); + ret = __copy_to_user_inatomic(user_data, + vaddr + shmem_page_offset, + page_length); + kunmap_atomic(vaddr); + + return ret; +} + +static void +shmem_clflush_swizzled_range(char *addr, unsigned long length, + bool swizzled) +{ + if (unlikely(swizzled)) { + unsigned long start = (unsigned long) addr; + unsigned long end = (unsigned long) addr + length; + + /* For swizzling simply ensure that we always flush both + * channels. Lame, but simple and it works. Swizzled + * pwrite/pread is far from a hotpath - current userspace + * doesn't use it at all. */ + start = round_down(start, 128); + end = round_up(end, 128); + + drm_clflush_virt_range((void *)start, end - start); + } else { + drm_clflush_virt_range(addr, length); + } + +} + +/* Only difference to the fast-path function is that this can handle bit17 + * and uses non-atomic copy and kmap functions. */ +static int +shmem_pread_slow(struct page *page, int shmem_page_offset, int page_length, + char __user *user_data, + bool page_do_bit17_swizzling, bool needs_clflush) +{ + char *vaddr; + int ret; + + vaddr = kmap(page); + if (needs_clflush) + shmem_clflush_swizzled_range(vaddr + shmem_page_offset, + page_length, + page_do_bit17_swizzling); + + if (page_do_bit17_swizzling) + ret = __copy_to_user_swizzled(user_data, + vaddr, shmem_page_offset, + page_length); + else + ret = __copy_to_user(user_data, + vaddr + shmem_page_offset, + page_length); + kunmap(page); + + return ret; +} + +static int +i915_gem_shmem_pread(struct drm_device *dev, + struct drm_i915_gem_object *obj, + struct drm_i915_gem_pread *args, + struct drm_file *file) { struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping; char __user *user_data; ssize_t remain; loff_t offset; - int shmem_page_offset, page_length, ret; + int shmem_page_offset, page_length, ret = 0; int obj_do_bit17_swizzling, page_do_bit17_swizzling; + int hit_slowpath = 0; + int prefaulted = 0; + int needs_clflush = 0; + int release_page; user_data = (char __user *) (uintptr_t) args->data_ptr; remain = args->size; obj_do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj); - offset = args->offset; + if (!(obj->base.read_domains & I915_GEM_DOMAIN_CPU)) { + /* If we're not in the cpu read domain, set ourself into the gtt + * read domain and manually flush cachelines (if required). This + * optimizes for the case when the gpu will dirty the data + * anyway again before the next pread happens. */ + if (obj->cache_level == I915_CACHE_NONE) + needs_clflush = 1; + ret = i915_gem_object_set_to_gtt_domain(obj, false); + if (ret) + return ret; + } - mutex_unlock(&dev->struct_mutex); + offset = args->offset; while (remain > 0) { struct page *page; - char *vaddr; /* Operation in this page * @@ -413,28 +417,51 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, if ((shmem_page_offset + page_length) > PAGE_SIZE) page_length = PAGE_SIZE - shmem_page_offset; - page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); - if (IS_ERR(page)) { - ret = PTR_ERR(page); - goto out; + if (obj->pages) { + page = obj->pages[offset >> PAGE_SHIFT]; + release_page = 0; + } else { + page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); + if (IS_ERR(page)) { + ret = PTR_ERR(page); + goto out; + } + release_page = 1; } page_do_bit17_swizzling = obj_do_bit17_swizzling && (page_to_phys(page) & (1 << 17)) != 0; - vaddr = kmap(page); - if (page_do_bit17_swizzling) - ret = __copy_to_user_swizzled(user_data, - vaddr, shmem_page_offset, - page_length); - else - ret = __copy_to_user(user_data, - vaddr + shmem_page_offset, - page_length); - kunmap(page); + ret = shmem_pread_fast(page, shmem_page_offset, page_length, + user_data, page_do_bit17_swizzling, + needs_clflush); + if (ret == 0) + goto next_page; - mark_page_accessed(page); + hit_slowpath = 1; + page_cache_get(page); + mutex_unlock(&dev->struct_mutex); + + if (!prefaulted) { + ret = fault_in_multipages_writeable(user_data, remain); + /* Userspace is tricking us, but we've already clobbered + * its pages with the prefault and promised to write the + * data up to the first fault. Hence ignore any errors + * and just continue. */ + (void)ret; + prefaulted = 1; + } + + ret = shmem_pread_slow(page, shmem_page_offset, page_length, + user_data, page_do_bit17_swizzling, + needs_clflush); + + mutex_lock(&dev->struct_mutex); page_cache_release(page); +next_page: + mark_page_accessed(page); + if (release_page) + page_cache_release(page); if (ret) { ret = -EFAULT; @@ -447,10 +474,11 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, } out: - mutex_lock(&dev->struct_mutex); - /* Fixup: Kill any reinstated backing storage pages */ - if (obj->madv == __I915_MADV_PURGED) - i915_gem_object_truncate(obj); + if (hit_slowpath) { + /* Fixup: Kill any reinstated backing storage pages */ + if (obj->madv == __I915_MADV_PURGED) + i915_gem_object_truncate(obj); + } return ret; } @@ -476,11 +504,6 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data, args->size)) return -EFAULT; - ret = fault_in_pages_writeable((char __user *)(uintptr_t)args->data_ptr, - args->size); - if (ret) - return -EFAULT; - ret = i915_mutex_lock_interruptible(dev); if (ret) return ret; @@ -500,17 +523,7 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data, trace_i915_gem_object_pread(obj, args->offset, args->size); - ret = i915_gem_object_set_cpu_read_domain_range(obj, - args->offset, - args->size); - if (ret) - goto out; - - ret = -EFAULT; - if (!i915_gem_object_needs_bit17_swizzle(obj)) - ret = i915_gem_shmem_pread_fast(dev, obj, args, file); - if (ret == -EFAULT) - ret = i915_gem_shmem_pread_slow(dev, obj, args, file); + ret = i915_gem_shmem_pread(dev, obj, args, file); out: drm_gem_object_unreference(&obj->base); @@ -539,30 +552,6 @@ fast_user_write(struct io_mapping *mapping, return unwritten; } -/* Here's the write path which can sleep for - * page faults - */ - -static inline void -slow_kernel_write(struct io_mapping *mapping, - loff_t gtt_base, int gtt_offset, - struct page *user_page, int user_offset, - int length) -{ - char __iomem *dst_vaddr; - char *src_vaddr; - - dst_vaddr = io_mapping_map_wc(mapping, gtt_base); - src_vaddr = kmap(user_page); - - memcpy_toio(dst_vaddr + gtt_offset, - src_vaddr + user_offset, - length); - - kunmap(user_page); - io_mapping_unmap(dst_vaddr); -} - /** * This is the fast pwrite path, where we copy the data directly from the * user into the GTT, uncached. @@ -577,7 +566,19 @@ i915_gem_gtt_pwrite_fast(struct drm_device *dev, ssize_t remain; loff_t offset, page_base; char __user *user_data; - int page_offset, page_length; + int page_offset, page_length, ret; + + ret = i915_gem_object_pin(obj, 0, true); + if (ret) + goto out; + + ret = i915_gem_object_set_to_gtt_domain(obj, true); + if (ret) + goto out_unpin; + + ret = i915_gem_object_put_fence(obj); + if (ret) + goto out_unpin; user_data = (char __user *) (uintptr_t) args->data_ptr; remain = args->size; @@ -602,214 +603,133 @@ i915_gem_gtt_pwrite_fast(struct drm_device *dev, * retry in the slow path. */ if (fast_user_write(dev_priv->mm.gtt_mapping, page_base, - page_offset, user_data, page_length)) - return -EFAULT; + page_offset, user_data, page_length)) { + ret = -EFAULT; + goto out_unpin; + } remain -= page_length; user_data += page_length; offset += page_length; } - return 0; +out_unpin: + i915_gem_object_unpin(obj); +out: + return ret; } -/** - * This is the fallback GTT pwrite path, which uses get_user_pages to pin - * the memory and maps it using kmap_atomic for copying. - * - * This code resulted in x11perf -rgb10text consuming about 10% more CPU - * than using i915_gem_gtt_pwrite_fast on a G45 (32-bit). - */ +/* Per-page copy function for the shmem pwrite fastpath. + * Flushes invalid cachelines before writing to the target if + * needs_clflush_before is set and flushes out any written cachelines after + * writing if needs_clflush is set. */ static int -i915_gem_gtt_pwrite_slow(struct drm_device *dev, - struct drm_i915_gem_object *obj, - struct drm_i915_gem_pwrite *args, - struct drm_file *file) +shmem_pwrite_fast(struct page *page, int shmem_page_offset, int page_length, + char __user *user_data, + bool page_do_bit17_swizzling, + bool needs_clflush_before, + bool needs_clflush_after) { - drm_i915_private_t *dev_priv = dev->dev_private; - ssize_t remain; - loff_t gtt_page_base, offset; - loff_t first_data_page, last_data_page, num_pages; - loff_t pinned_pages, i; - struct page **user_pages; - struct mm_struct *mm = current->mm; - int gtt_page_offset, data_page_offset, data_page_index, page_length; + char *vaddr; int ret; - uint64_t data_ptr = args->data_ptr; - - remain = args->size; - - /* Pin the user pages containing the data. We can't fault while - * holding the struct mutex, and all of the pwrite implementations - * want to hold it while dereferencing the user data. - */ - first_data_page = data_ptr / PAGE_SIZE; - last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE; - num_pages = last_data_page - first_data_page + 1; - - user_pages = drm_malloc_ab(num_pages, sizeof(struct page *)); - if (user_pages == NULL) - return -ENOMEM; - - mutex_unlock(&dev->struct_mutex); - down_read(&mm->mmap_sem); - pinned_pages = get_user_pages(current, mm, (uintptr_t)args->data_ptr, - num_pages, 0, 0, user_pages, NULL); - up_read(&mm->mmap_sem); - mutex_lock(&dev->struct_mutex); - if (pinned_pages < num_pages) { - ret = -EFAULT; - goto out_unpin_pages; - } - - ret = i915_gem_object_set_to_gtt_domain(obj, true); - if (ret) - goto out_unpin_pages; - - ret = i915_gem_object_put_fence(obj); - if (ret) - goto out_unpin_pages; - - offset = obj->gtt_offset + args->offset; - while (remain > 0) { - /* Operation in this page - * - * gtt_page_base = page offset within aperture - * gtt_page_offset = offset within page in aperture - * data_page_index = page number in get_user_pages return - * data_page_offset = offset with data_page_index page. - * page_length = bytes to copy for this page - */ - gtt_page_base = offset & PAGE_MASK; - gtt_page_offset = offset_in_page(offset); - data_page_index = data_ptr / PAGE_SIZE - first_data_page; - data_page_offset = offset_in_page(data_ptr); - - page_length = remain; - if ((gtt_page_offset + page_length) > PAGE_SIZE) - page_length = PAGE_SIZE - gtt_page_offset; - if ((data_page_offset + page_length) > PAGE_SIZE) - page_length = PAGE_SIZE - data_page_offset; - - slow_kernel_write(dev_priv->mm.gtt_mapping, - gtt_page_base, gtt_page_offset, - user_pages[data_page_index], - data_page_offset, - page_length); - - remain -= page_length; - offset += page_length; - data_ptr += page_length; - } + if (unlikely(page_do_bit17_swizzling)) + return -EINVAL; -out_unpin_pages: - for (i = 0; i < pinned_pages; i++) - page_cache_release(user_pages[i]); - drm_free_large(user_pages); + vaddr = kmap_atomic(page); + if (needs_clflush_before) + drm_clflush_virt_range(vaddr + shmem_page_offset, + page_length); + ret = __copy_from_user_inatomic_nocache(vaddr + shmem_page_offset, + user_data, + page_length); + if (needs_clflush_after) + drm_clflush_virt_range(vaddr + shmem_page_offset, + page_length); + kunmap_atomic(vaddr); return ret; } -/** - * This is the fast shmem pwrite path, which attempts to directly - * copy_from_user into the kmapped pages backing the object. - */ +/* Only difference to the fast-path function is that this can handle bit17 + * and uses non-atomic copy and kmap functions. */ static int -i915_gem_shmem_pwrite_fast(struct drm_device *dev, - struct drm_i915_gem_object *obj, - struct drm_i915_gem_pwrite *args, - struct drm_file *file) +shmem_pwrite_slow(struct page *page, int shmem_page_offset, int page_length, + char __user *user_data, + bool page_do_bit17_swizzling, + bool needs_clflush_before, + bool needs_clflush_after) { - struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping; - ssize_t remain; - loff_t offset; - char __user *user_data; - int page_offset, page_length; - - user_data = (char __user *) (uintptr_t) args->data_ptr; - remain = args->size; - - offset = args->offset; - obj->dirty = 1; - - while (remain > 0) { - struct page *page; - char *vaddr; - int ret; - - /* Operation in this page - * - * page_offset = offset within page - * page_length = bytes to copy for this page - */ - page_offset = offset_in_page(offset); - page_length = remain; - if ((page_offset + remain) > PAGE_SIZE) - page_length = PAGE_SIZE - page_offset; - - page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); - if (IS_ERR(page)) - return PTR_ERR(page); + char *vaddr; + int ret; - vaddr = kmap_atomic(page); - ret = __copy_from_user_inatomic(vaddr + page_offset, + vaddr = kmap(page); + if (unlikely(needs_clflush_before || page_do_bit17_swizzling)) + shmem_clflush_swizzled_range(vaddr + shmem_page_offset, + page_length, + page_do_bit17_swizzling); + if (page_do_bit17_swizzling) + ret = __copy_from_user_swizzled(vaddr, shmem_page_offset, user_data, page_length); - kunmap_atomic(vaddr); - - set_page_dirty(page); - mark_page_accessed(page); - page_cache_release(page); - - /* If we get a fault while copying data, then (presumably) our - * source page isn't available. Return the error and we'll - * retry in the slow path. - */ - if (ret) - return -EFAULT; - - remain -= page_length; - user_data += page_length; - offset += page_length; - } + else + ret = __copy_from_user(vaddr + shmem_page_offset, + user_data, + page_length); + if (needs_clflush_after) + shmem_clflush_swizzled_range(vaddr + shmem_page_offset, + page_length, + page_do_bit17_swizzling); + kunmap(page); - return 0; + return ret; } -/** - * This is the fallback shmem pwrite path, which uses get_user_pages to pin - * the memory and maps it using kmap_atomic for copying. - * - * This avoids taking mmap_sem for faulting on the user's address while the - * struct_mutex is held. - */ static int -i915_gem_shmem_pwrite_slow(struct drm_device *dev, - struct drm_i915_gem_object *obj, - struct drm_i915_gem_pwrite *args, - struct drm_file *file) +i915_gem_shmem_pwrite(struct drm_device *dev, + struct drm_i915_gem_object *obj, + struct drm_i915_gem_pwrite *args, + struct drm_file *file) { struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping; ssize_t remain; loff_t offset; char __user *user_data; - int shmem_page_offset, page_length, ret; + int shmem_page_offset, page_length, ret = 0; int obj_do_bit17_swizzling, page_do_bit17_swizzling; + int hit_slowpath = 0; + int needs_clflush_after = 0; + int needs_clflush_before = 0; + int release_page; user_data = (char __user *) (uintptr_t) args->data_ptr; remain = args->size; obj_do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj); + if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) { + /* If we're not in the cpu write domain, set ourself into the gtt + * write domain and manually flush cachelines (if required). This + * optimizes for the case when the gpu will use the data + * right away and we therefore have to clflush anyway. */ + if (obj->cache_level == I915_CACHE_NONE) + needs_clflush_after = 1; + ret = i915_gem_object_set_to_gtt_domain(obj, true); + if (ret) + return ret; + } + /* Same trick applies for invalidate partially written cachelines before + * writing. */ + if (!(obj->base.read_domains & I915_GEM_DOMAIN_CPU) + && obj->cache_level == I915_CACHE_NONE) + needs_clflush_before = 1; + offset = args->offset; obj->dirty = 1; - mutex_unlock(&dev->struct_mutex); - while (remain > 0) { struct page *page; - char *vaddr; + int partial_cacheline_write; /* Operation in this page * @@ -822,29 +742,51 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, if ((shmem_page_offset + page_length) > PAGE_SIZE) page_length = PAGE_SIZE - shmem_page_offset; - page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); - if (IS_ERR(page)) { - ret = PTR_ERR(page); - goto out; + /* If we don't overwrite a cacheline completely we need to be + * careful to have up-to-date data by first clflushing. Don't + * overcomplicate things and flush the entire patch. */ + partial_cacheline_write = needs_clflush_before && + ((shmem_page_offset | page_length) + & (boot_cpu_data.x86_clflush_size - 1)); + + if (obj->pages) { + page = obj->pages[offset >> PAGE_SHIFT]; + release_page = 0; + } else { + page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); + if (IS_ERR(page)) { + ret = PTR_ERR(page); + goto out; + } + release_page = 1; } page_do_bit17_swizzling = obj_do_bit17_swizzling && (page_to_phys(page) & (1 << 17)) != 0; - vaddr = kmap(page); - if (page_do_bit17_swizzling) - ret = __copy_from_user_swizzled(vaddr, shmem_page_offset, - user_data, - page_length); - else - ret = __copy_from_user(vaddr + shmem_page_offset, - user_data, - page_length); - kunmap(page); + ret = shmem_pwrite_fast(page, shmem_page_offset, page_length, + user_data, page_do_bit17_swizzling, + partial_cacheline_write, + needs_clflush_after); + if (ret == 0) + goto next_page; + hit_slowpath = 1; + page_cache_get(page); + mutex_unlock(&dev->struct_mutex); + + ret = shmem_pwrite_slow(page, shmem_page_offset, page_length, + user_data, page_do_bit17_swizzling, + partial_cacheline_write, + needs_clflush_after); + + mutex_lock(&dev->struct_mutex); + page_cache_release(page); +next_page: set_page_dirty(page); mark_page_accessed(page); - page_cache_release(page); + if (release_page) + page_cache_release(page); if (ret) { ret = -EFAULT; @@ -857,17 +799,21 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, } out: - mutex_lock(&dev->struct_mutex); - /* Fixup: Kill any reinstated backing storage pages */ - if (obj->madv == __I915_MADV_PURGED) - i915_gem_object_truncate(obj); - /* and flush dirty cachelines in case the object isn't in the cpu write - * domain anymore. */ - if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) { - i915_gem_clflush_object(obj); - intel_gtt_chipset_flush(); + if (hit_slowpath) { + /* Fixup: Kill any reinstated backing storage pages */ + if (obj->madv == __I915_MADV_PURGED) + i915_gem_object_truncate(obj); + /* and flush dirty cachelines in case the object isn't in the cpu write + * domain anymore. */ + if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) { + i915_gem_clflush_object(obj); + intel_gtt_chipset_flush(); + } } + if (needs_clflush_after) + intel_gtt_chipset_flush(); + return ret; } @@ -892,8 +838,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, args->size)) return -EFAULT; - ret = fault_in_pages_readable((char __user *)(uintptr_t)args->data_ptr, - args->size); + ret = fault_in_multipages_readable((char __user *)(uintptr_t)args->data_ptr, + args->size); if (ret) return -EFAULT; @@ -916,6 +862,7 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, trace_i915_gem_object_pwrite(obj, args->offset, args->size); + ret = -EFAULT; /* We can only do the GTT pwrite on untiled buffers, as otherwise * it would end up going through the fenced access, and we'll get * different detiling behavior between reading and writing. @@ -928,42 +875,17 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, } if (obj->gtt_space && + obj->cache_level == I915_CACHE_NONE && + obj->map_and_fenceable && obj->base.write_domain != I915_GEM_DOMAIN_CPU) { - ret = i915_gem_object_pin(obj, 0, true); - if (ret) - goto out; - - ret = i915_gem_object_set_to_gtt_domain(obj, true); - if (ret) - goto out_unpin; - - ret = i915_gem_object_put_fence(obj); - if (ret) - goto out_unpin; - ret = i915_gem_gtt_pwrite_fast(dev, obj, args, file); - if (ret == -EFAULT) - ret = i915_gem_gtt_pwrite_slow(dev, obj, args, file); - -out_unpin: - i915_gem_object_unpin(obj); - - if (ret != -EFAULT) - goto out; - /* Fall through to the shmfs paths because the gtt paths might - * fail with non-page-backed user pointers (e.g. gtt mappings - * when moving data between textures). */ + /* Note that the gtt paths might fail with non-page-backed user + * pointers (e.g. gtt mappings when moving data between + * textures). Fallback to the shmem path in that case. */ } - ret = i915_gem_object_set_to_cpu_domain(obj, 1); - if (ret) - goto out; - - ret = -EFAULT; - if (!i915_gem_object_needs_bit17_swizzle(obj)) - ret = i915_gem_shmem_pwrite_fast(dev, obj, args, file); if (ret == -EFAULT) - ret = i915_gem_shmem_pwrite_slow(dev, obj, args, file); + ret = i915_gem_shmem_pwrite(dev, obj, args, file); out: drm_gem_object_unreference(&obj->base); @@ -1153,6 +1075,9 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) goto unlock; } + if (!obj->has_global_gtt_mapping) + i915_gem_gtt_bind_object(obj, obj->cache_level); + if (obj->tiling_mode == I915_TILING_NONE) ret = i915_gem_object_put_fence(obj); else @@ -1546,6 +1471,9 @@ i915_gem_object_truncate(struct drm_i915_gem_object *obj) inode = obj->base.filp->f_path.dentry->d_inode; shmem_truncate_range(inode, 0, (loff_t)-1); + if (obj->base.map_list.map) + drm_gem_free_mmap_offset(&obj->base); + obj->madv = __I915_MADV_PURGED; } @@ -1954,6 +1882,8 @@ i915_wait_request(struct intel_ring_buffer *ring, if (!i915_seqno_passed(ring->get_seqno(ring), seqno)) { if (HAS_PCH_SPLIT(ring->dev)) ier = I915_READ(DEIER) | I915_READ(GTIER); + else if (IS_VALLEYVIEW(ring->dev)) + ier = I915_READ(GTIER) | I915_READ(VLV_IER); else ier = I915_READ(IER); if (!ier) { @@ -2100,11 +2030,13 @@ i915_gem_object_unbind(struct drm_i915_gem_object *obj) trace_i915_gem_object_unbind(obj); - i915_gem_gtt_unbind_object(obj); + if (obj->has_global_gtt_mapping) + i915_gem_gtt_unbind_object(obj); if (obj->has_aliasing_ppgtt_mapping) { i915_ppgtt_unbind_object(dev_priv->mm.aliasing_ppgtt, obj); obj->has_aliasing_ppgtt_mapping = 0; } + i915_gem_gtt_finish_object(obj); i915_gem_object_put_pages_gtt(obj); @@ -2749,7 +2681,7 @@ i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj, return ret; } - ret = i915_gem_gtt_bind_object(obj); + ret = i915_gem_gtt_prepare_object(obj); if (ret) { i915_gem_object_put_pages_gtt(obj); drm_mm_put_block(obj->gtt_space); @@ -2761,6 +2693,9 @@ i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj, goto search_free; } + if (!dev_priv->mm.aliasing_ppgtt) + i915_gem_gtt_bind_object(obj, obj->cache_level); + list_add_tail(&obj->gtt_list, &dev_priv->mm.gtt_list); list_add_tail(&obj->mm_list, &dev_priv->mm.inactive_list); @@ -2953,7 +2888,8 @@ int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj, return ret; } - i915_gem_gtt_rebind_object(obj, cache_level); + if (obj->has_global_gtt_mapping) + i915_gem_gtt_bind_object(obj, cache_level); if (obj->has_aliasing_ppgtt_mapping) i915_ppgtt_bind_object(dev_priv->mm.aliasing_ppgtt, obj, cache_level); @@ -3082,7 +3018,7 @@ i915_gem_object_finish_gpu(struct drm_i915_gem_object *obj) * This function returns when the move is complete, including waiting on * flushes to occur. */ -static int +int i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write) { uint32_t old_write_domain, old_read_domains; @@ -3101,11 +3037,6 @@ i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write) i915_gem_object_flush_gtt_write_domain(obj); - /* If we have a partially-valid cache of the object in the CPU, - * finish invalidating it and free the per-page flags. - */ - i915_gem_object_set_to_full_cpu_read_domain(obj); - old_write_domain = obj->base.write_domain; old_read_domains = obj->base.read_domains; @@ -3136,113 +3067,6 @@ i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write) return 0; } -/** - * Moves the object from a partially CPU read to a full one. - * - * Note that this only resolves i915_gem_object_set_cpu_read_domain_range(), - * and doesn't handle transitioning from !(read_domains & I915_GEM_DOMAIN_CPU). - */ -static void -i915_gem_object_set_to_full_cpu_read_domain(struct drm_i915_gem_object *obj) -{ - if (!obj->page_cpu_valid) - return; - - /* If we're partially in the CPU read domain, finish moving it in. - */ - if (obj->base.read_domains & I915_GEM_DOMAIN_CPU) { - int i; - - for (i = 0; i <= (obj->base.size - 1) / PAGE_SIZE; i++) { - if (obj->page_cpu_valid[i]) - continue; - drm_clflush_pages(obj->pages + i, 1); - } - } - - /* Free the page_cpu_valid mappings which are now stale, whether - * or not we've got I915_GEM_DOMAIN_CPU. - */ - kfree(obj->page_cpu_valid); - obj->page_cpu_valid = NULL; -} - -/** - * Set the CPU read domain on a range of the object. - * - * The object ends up with I915_GEM_DOMAIN_CPU in its read flags although it's - * not entirely valid. The page_cpu_valid member of the object flags which - * pages have been flushed, and will be respected by - * i915_gem_object_set_to_cpu_domain() if it's called on to get a valid mapping - * of the whole object. - * - * This function returns when the move is complete, including waiting on - * flushes to occur. - */ -static int -i915_gem_object_set_cpu_read_domain_range(struct drm_i915_gem_object *obj, - uint64_t offset, uint64_t size) -{ - uint32_t old_read_domains; - int i, ret; - - if (offset == 0 && size == obj->base.size) - return i915_gem_object_set_to_cpu_domain(obj, 0); - - ret = i915_gem_object_flush_gpu_write_domain(obj); - if (ret) - return ret; - - ret = i915_gem_object_wait_rendering(obj); - if (ret) - return ret; - - i915_gem_object_flush_gtt_write_domain(obj); - - /* If we're already fully in the CPU read domain, we're done. */ - if (obj->page_cpu_valid == NULL && - (obj->base.read_domains & I915_GEM_DOMAIN_CPU) != 0) - return 0; - - /* Otherwise, create/clear the per-page CPU read domain flag if we're - * newly adding I915_GEM_DOMAIN_CPU - */ - if (obj->page_cpu_valid == NULL) { - obj->page_cpu_valid = kzalloc(obj->base.size / PAGE_SIZE, - GFP_KERNEL); - if (obj->page_cpu_valid == NULL) - return -ENOMEM; - } else if ((obj->base.read_domains & I915_GEM_DOMAIN_CPU) == 0) - memset(obj->page_cpu_valid, 0, obj->base.size / PAGE_SIZE); - - /* Flush the cache on any pages that are still invalid from the CPU's - * perspective. - */ - for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; - i++) { - if (obj->page_cpu_valid[i]) - continue; - - drm_clflush_pages(obj->pages + i, 1); - - obj->page_cpu_valid[i] = 1; - } - - /* It should now be out of any other write domains, and we can update - * the domain values for our changes. - */ - BUG_ON((obj->base.write_domain & ~I915_GEM_DOMAIN_CPU) != 0); - - old_read_domains = obj->base.read_domains; - obj->base.read_domains |= I915_GEM_DOMAIN_CPU; - - trace_i915_gem_object_change_domain(obj, - old_read_domains, - obj->base.write_domain); - - return 0; -} - /* Throttle our rendering by waiting until the ring has completed our requests * emitted over 20 msec ago. * @@ -3343,6 +3167,9 @@ i915_gem_object_pin(struct drm_i915_gem_object *obj, return ret; } + if (!obj->has_global_gtt_mapping && map_and_fenceable) + i915_gem_gtt_bind_object(obj, obj->cache_level); + if (obj->pin_count++ == 0) { if (!obj->active) list_move_tail(&obj->mm_list, @@ -3664,7 +3491,6 @@ static void i915_gem_free_object_tail(struct drm_i915_gem_object *obj) drm_gem_object_release(&obj->base); i915_gem_info_remove_obj(dev_priv, obj->base.size); - kfree(obj->page_cpu_valid); kfree(obj->bit_17); kfree(obj); } diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index f51a696486cb..254e2f6ac4f0 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -266,6 +266,12 @@ eb_destroy(struct eb_objects *eb) kfree(eb); } +static inline int use_cpu_reloc(struct drm_i915_gem_object *obj) +{ + return (obj->base.write_domain == I915_GEM_DOMAIN_CPU || + obj->cache_level != I915_CACHE_NONE); +} + static int i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj, struct eb_objects *eb, @@ -273,6 +279,7 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj, { struct drm_device *dev = obj->base.dev; struct drm_gem_object *target_obj; + struct drm_i915_gem_object *target_i915_obj; uint32_t target_offset; int ret = -EINVAL; @@ -281,7 +288,8 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj, if (unlikely(target_obj == NULL)) return -ENOENT; - target_offset = to_intel_bo(target_obj)->gtt_offset; + target_i915_obj = to_intel_bo(target_obj); + target_offset = target_i915_obj->gtt_offset; /* The target buffer should have appeared before us in the * exec_object list, so it should have a GTT space bound by now. @@ -352,11 +360,19 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj, return ret; } + /* We can't wait for rendering with pagefaults disabled */ + if (obj->active && in_atomic()) + return -EFAULT; + reloc->delta += target_offset; - if (obj->base.write_domain == I915_GEM_DOMAIN_CPU) { + if (use_cpu_reloc(obj)) { uint32_t page_offset = reloc->offset & ~PAGE_MASK; char *vaddr; + ret = i915_gem_object_set_to_cpu_domain(obj, 1); + if (ret) + return ret; + vaddr = kmap_atomic(obj->pages[reloc->offset >> PAGE_SHIFT]); *(uint32_t *)(vaddr + page_offset) = reloc->delta; kunmap_atomic(vaddr); @@ -365,10 +381,6 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj, uint32_t __iomem *reloc_entry; void __iomem *reloc_page; - /* We can't wait for rendering with pagefaults disabled */ - if (obj->active && in_atomic()) - return -EFAULT; - ret = i915_gem_object_set_to_gtt_domain(obj, 1); if (ret) return ret; @@ -383,6 +395,16 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj, io_mapping_unmap_atomic(reloc_page); } + /* Sandybridge PPGTT errata: We need a global gtt mapping for MI and + * pipe_control writes because the gpu doesn't properly redirect them + * through the ppgtt for non_secure batchbuffers. */ + if (unlikely(IS_GEN6(dev) && + reloc->write_domain == I915_GEM_DOMAIN_INSTRUCTION && + !target_i915_obj->has_global_gtt_mapping)) { + i915_gem_gtt_bind_object(target_i915_obj, + target_i915_obj->cache_level); + } + /* and update the user's relocation entry */ reloc->presumed_offset = target_offset; @@ -393,30 +415,46 @@ static int i915_gem_execbuffer_relocate_object(struct drm_i915_gem_object *obj, struct eb_objects *eb) { +#define N_RELOC(x) ((x) / sizeof(struct drm_i915_gem_relocation_entry)) + struct drm_i915_gem_relocation_entry stack_reloc[N_RELOC(512)]; struct drm_i915_gem_relocation_entry __user *user_relocs; struct drm_i915_gem_exec_object2 *entry = obj->exec_entry; - int i, ret; + int remain, ret; user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr; - for (i = 0; i < entry->relocation_count; i++) { - struct drm_i915_gem_relocation_entry reloc; - if (__copy_from_user_inatomic(&reloc, - user_relocs+i, - sizeof(reloc))) + remain = entry->relocation_count; + while (remain) { + struct drm_i915_gem_relocation_entry *r = stack_reloc; + int count = remain; + if (count > ARRAY_SIZE(stack_reloc)) + count = ARRAY_SIZE(stack_reloc); + remain -= count; + + if (__copy_from_user_inatomic(r, user_relocs, count*sizeof(r[0]))) return -EFAULT; - ret = i915_gem_execbuffer_relocate_entry(obj, eb, &reloc); - if (ret) - return ret; + do { + u64 offset = r->presumed_offset; - if (__copy_to_user_inatomic(&user_relocs[i].presumed_offset, - &reloc.presumed_offset, - sizeof(reloc.presumed_offset))) - return -EFAULT; + ret = i915_gem_execbuffer_relocate_entry(obj, eb, r); + if (ret) + return ret; + + if (r->presumed_offset != offset && + __copy_to_user_inatomic(&user_relocs->presumed_offset, + &r->presumed_offset, + sizeof(r->presumed_offset))) { + return -EFAULT; + } + + user_relocs++; + r++; + } while (--count); } return 0; +#undef N_RELOC } static int @@ -465,6 +503,13 @@ i915_gem_execbuffer_relocate(struct drm_device *dev, #define __EXEC_OBJECT_HAS_FENCE (1<<31) static int +need_reloc_mappable(struct drm_i915_gem_object *obj) +{ + struct drm_i915_gem_exec_object2 *entry = obj->exec_entry; + return entry->relocation_count && !use_cpu_reloc(obj); +} + +static int pin_and_fence_object(struct drm_i915_gem_object *obj, struct intel_ring_buffer *ring) { @@ -477,8 +522,7 @@ pin_and_fence_object(struct drm_i915_gem_object *obj, has_fenced_gpu_access && entry->flags & EXEC_OBJECT_NEEDS_FENCE && obj->tiling_mode != I915_TILING_NONE; - need_mappable = - entry->relocation_count ? true : need_fence; + need_mappable = need_fence || need_reloc_mappable(obj); ret = i915_gem_object_pin(obj, entry->alignment, need_mappable); if (ret) @@ -535,8 +579,7 @@ i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring, has_fenced_gpu_access && entry->flags & EXEC_OBJECT_NEEDS_FENCE && obj->tiling_mode != I915_TILING_NONE; - need_mappable = - entry->relocation_count ? true : need_fence; + need_mappable = need_fence || need_reloc_mappable(obj); if (need_mappable) list_move(&obj->exec_list, &ordered_objects); @@ -576,8 +619,7 @@ i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring, has_fenced_gpu_access && entry->flags & EXEC_OBJECT_NEEDS_FENCE && obj->tiling_mode != I915_TILING_NONE; - need_mappable = - entry->relocation_count ? true : need_fence; + need_mappable = need_fence || need_reloc_mappable(obj); if ((entry->alignment && obj->gtt_offset & (entry->alignment - 1)) || (need_mappable && !obj->map_and_fenceable)) @@ -955,7 +997,7 @@ validate_exec_list(struct drm_i915_gem_exec_object2 *exec, if (!access_ok(VERIFY_WRITE, ptr, length)) return -EFAULT; - if (fault_in_pages_readable(ptr, length)) + if (fault_in_multipages_readable(ptr, length)) return -EFAULT; } diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index a135c61f4119..4fb875de32e6 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -346,42 +346,28 @@ void i915_gem_restore_gtt_mappings(struct drm_device *dev) list_for_each_entry(obj, &dev_priv->mm.gtt_list, gtt_list) { i915_gem_clflush_object(obj); - i915_gem_gtt_rebind_object(obj, obj->cache_level); + i915_gem_gtt_bind_object(obj, obj->cache_level); } intel_gtt_chipset_flush(); } -int i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj) +int i915_gem_gtt_prepare_object(struct drm_i915_gem_object *obj) { struct drm_device *dev = obj->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - unsigned int agp_type = cache_level_to_agp_type(dev, obj->cache_level); - int ret; - if (dev_priv->mm.gtt->needs_dmar) { - ret = intel_gtt_map_memory(obj->pages, - obj->base.size >> PAGE_SHIFT, - &obj->sg_list, - &obj->num_sg); - if (ret != 0) - return ret; - - intel_gtt_insert_sg_entries(obj->sg_list, - obj->num_sg, - obj->gtt_space->start >> PAGE_SHIFT, - agp_type); - } else - intel_gtt_insert_pages(obj->gtt_space->start >> PAGE_SHIFT, - obj->base.size >> PAGE_SHIFT, - obj->pages, - agp_type); - - return 0; + if (dev_priv->mm.gtt->needs_dmar) + return intel_gtt_map_memory(obj->pages, + obj->base.size >> PAGE_SHIFT, + &obj->sg_list, + &obj->num_sg); + else + return 0; } -void i915_gem_gtt_rebind_object(struct drm_i915_gem_object *obj, - enum i915_cache_level cache_level) +void i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj, + enum i915_cache_level cache_level) { struct drm_device *dev = obj->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -399,19 +385,26 @@ void i915_gem_gtt_rebind_object(struct drm_i915_gem_object *obj, obj->base.size >> PAGE_SHIFT, obj->pages, agp_type); + + obj->has_global_gtt_mapping = 1; } void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj) { + intel_gtt_clear_range(obj->gtt_space->start >> PAGE_SHIFT, + obj->base.size >> PAGE_SHIFT); + + obj->has_global_gtt_mapping = 0; +} + +void i915_gem_gtt_finish_object(struct drm_i915_gem_object *obj) +{ struct drm_device *dev = obj->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; bool interruptible; interruptible = do_idling(dev_priv); - intel_gtt_clear_range(obj->gtt_space->start >> PAGE_SHIFT, - obj->base.size >> PAGE_SHIFT); - if (obj->sg_list) { intel_gtt_unmap_memory(obj->sg_list, obj->num_sg); obj->sg_list = NULL; @@ -419,3 +412,23 @@ void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj) undo_idling(dev_priv, interruptible); } + +void i915_gem_init_global_gtt(struct drm_device *dev, + unsigned long start, + unsigned long mappable_end, + unsigned long end) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + + /* Substract the guard page ... */ + drm_mm_init(&dev_priv->mm.gtt_space, start, end - start - PAGE_SIZE); + + dev_priv->mm.gtt_start = start; + dev_priv->mm.gtt_mappable_end = mappable_end; + dev_priv->mm.gtt_end = end; + dev_priv->mm.gtt_total = end - start; + dev_priv->mm.mappable_gtt_total = min(end, mappable_end) - start; + + /* ... but ensure that we clear the entire range. */ + intel_gtt_clear_range(start / PAGE_SIZE, (end-start) / PAGE_SIZE); +} diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index afd4e03e337e..febddc2952fb 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -26,6 +26,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/sysrq.h> #include <linux/slab.h> #include "drmP.h" @@ -118,6 +120,10 @@ void intel_enable_asle(struct drm_device *dev) drm_i915_private_t *dev_priv = dev->dev_private; unsigned long irqflags; + /* FIXME: opregion/asle for VLV */ + if (IS_VALLEYVIEW(dev)) + return; + spin_lock_irqsave(&dev_priv->irq_lock, irqflags); if (HAS_PCH_SPLIT(dev)) @@ -424,6 +430,128 @@ static void gen6_pm_rps_work(struct work_struct *work) mutex_unlock(&dev_priv->dev->struct_mutex); } +static void snb_gt_irq_handler(struct drm_device *dev, + struct drm_i915_private *dev_priv, + u32 gt_iir) +{ + + if (gt_iir & (GEN6_RENDER_USER_INTERRUPT | + GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT)) + notify_ring(dev, &dev_priv->ring[RCS]); + if (gt_iir & GEN6_BSD_USER_INTERRUPT) + notify_ring(dev, &dev_priv->ring[VCS]); + if (gt_iir & GEN6_BLITTER_USER_INTERRUPT) + notify_ring(dev, &dev_priv->ring[BCS]); + + if (gt_iir & (GT_GEN6_BLT_CS_ERROR_INTERRUPT | + GT_GEN6_BSD_CS_ERROR_INTERRUPT | + GT_RENDER_CS_ERROR_INTERRUPT)) { + DRM_ERROR("GT error interrupt 0x%08x\n", gt_iir); + i915_handle_error(dev, false); + } +} + +static irqreturn_t valleyview_irq_handler(DRM_IRQ_ARGS) +{ + struct drm_device *dev = (struct drm_device *) arg; + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + u32 iir, gt_iir, pm_iir; + irqreturn_t ret = IRQ_NONE; + unsigned long irqflags; + int pipe; + u32 pipe_stats[I915_MAX_PIPES]; + u32 vblank_status; + int vblank = 0; + bool blc_event; + + atomic_inc(&dev_priv->irq_received); + + vblank_status = PIPE_START_VBLANK_INTERRUPT_STATUS | + PIPE_VBLANK_INTERRUPT_STATUS; + + while (true) { + iir = I915_READ(VLV_IIR); + gt_iir = I915_READ(GTIIR); + pm_iir = I915_READ(GEN6_PMIIR); + + if (gt_iir == 0 && pm_iir == 0 && iir == 0) + goto out; + + ret = IRQ_HANDLED; + + snb_gt_irq_handler(dev, dev_priv, gt_iir); + + spin_lock_irqsave(&dev_priv->irq_lock, irqflags); + for_each_pipe(pipe) { + int reg = PIPESTAT(pipe); + pipe_stats[pipe] = I915_READ(reg); + + /* + * Clear the PIPE*STAT regs before the IIR + */ + if (pipe_stats[pipe] & 0x8000ffff) { + if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) + DRM_DEBUG_DRIVER("pipe %c underrun\n", + pipe_name(pipe)); + I915_WRITE(reg, pipe_stats[pipe]); + } + } + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); + + /* Consume port. Then clear IIR or we'll miss events */ + if (iir & I915_DISPLAY_PORT_INTERRUPT) { + u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT); + + DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n", + hotplug_status); + if (hotplug_status & dev_priv->hotplug_supported_mask) + queue_work(dev_priv->wq, + &dev_priv->hotplug_work); + + I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); + I915_READ(PORT_HOTPLUG_STAT); + } + + + if (iir & I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT) { + drm_handle_vblank(dev, 0); + vblank++; + if (!dev_priv->flip_pending_is_done) { + intel_finish_page_flip(dev, 0); + } + } + + if (iir & I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT) { + drm_handle_vblank(dev, 1); + vblank++; + if (!dev_priv->flip_pending_is_done) { + intel_finish_page_flip(dev, 0); + } + } + + if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS) + blc_event = true; + + if (pm_iir & GEN6_PM_DEFERRED_EVENTS) { + unsigned long flags; + spin_lock_irqsave(&dev_priv->rps_lock, flags); + WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n"); + dev_priv->pm_iir |= pm_iir; + I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir); + POSTING_READ(GEN6_PMIMR); + spin_unlock_irqrestore(&dev_priv->rps_lock, flags); + queue_work(dev_priv->wq, &dev_priv->rps_work); + } + + I915_WRITE(GTIIR, gt_iir); + I915_WRITE(GEN6_PMIIR, pm_iir); + I915_WRITE(VLV_IIR, iir); + } + +out: + return ret; +} + static void pch_irq_handler(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -499,12 +627,7 @@ static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS) READ_BREADCRUMB(dev_priv); } - if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY)) - notify_ring(dev, &dev_priv->ring[RCS]); - if (gt_iir & GT_GEN6_BSD_USER_INTERRUPT) - notify_ring(dev, &dev_priv->ring[VCS]); - if (gt_iir & GT_BLT_USER_INTERRUPT) - notify_ring(dev, &dev_priv->ring[BCS]); + snb_gt_irq_handler(dev, dev_priv, gt_iir); if (de_iir & DE_GSE_IVB) intel_opregion_gse_intr(dev); @@ -556,6 +679,16 @@ done: return ret; } +static void ilk_gt_irq_handler(struct drm_device *dev, + struct drm_i915_private *dev_priv, + u32 gt_iir) +{ + if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY)) + notify_ring(dev, &dev_priv->ring[RCS]); + if (gt_iir & GT_BSD_USER_INTERRUPT) + notify_ring(dev, &dev_priv->ring[VCS]); +} + static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; @@ -564,13 +697,9 @@ static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS) u32 de_iir, gt_iir, de_ier, pch_iir, pm_iir; u32 hotplug_mask; struct drm_i915_master_private *master_priv; - u32 bsd_usr_interrupt = GT_BSD_USER_INTERRUPT; atomic_inc(&dev_priv->irq_received); - if (IS_GEN6(dev)) - bsd_usr_interrupt = GT_GEN6_BSD_USER_INTERRUPT; - /* disable master interrupt before clearing iir */ de_ier = I915_READ(DEIER); I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL); @@ -599,12 +728,10 @@ static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS) READ_BREADCRUMB(dev_priv); } - if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY)) - notify_ring(dev, &dev_priv->ring[RCS]); - if (gt_iir & bsd_usr_interrupt) - notify_ring(dev, &dev_priv->ring[VCS]); - if (gt_iir & GT_BLT_USER_INTERRUPT) - notify_ring(dev, &dev_priv->ring[BCS]); + if (IS_GEN5(dev)) + ilk_gt_irq_handler(dev, dev_priv, gt_iir); + else + snb_gt_irq_handler(dev, dev_priv, gt_iir); if (de_iir & DE_GSE) intel_opregion_gse_intr(dev); @@ -727,7 +854,8 @@ i915_error_object_create(struct drm_i915_private *dev_priv, goto unwind; local_irq_save(flags); - if (reloc_offset < dev_priv->mm.gtt_mappable_end) { + if (reloc_offset < dev_priv->mm.gtt_mappable_end && + src->has_global_gtt_mapping) { void __iomem *s; /* Simply ignore tiling or any overlapping fence. @@ -901,7 +1029,6 @@ static void i915_record_ring_state(struct drm_device *dev, struct drm_i915_private *dev_priv = dev->dev_private; if (INTEL_INFO(dev)->gen >= 6) { - error->faddr[ring->id] = I915_READ(RING_DMA_FADD(ring->mmio_base)); error->fault_reg[ring->id] = I915_READ(RING_FAULT_REG(ring)); error->semaphore_mboxes[ring->id][0] = I915_READ(RING_SYNC_0(ring->mmio_base)); @@ -910,6 +1037,7 @@ static void i915_record_ring_state(struct drm_device *dev, } if (INTEL_INFO(dev)->gen >= 4) { + error->faddr[ring->id] = I915_READ(RING_DMA_FADD(ring->mmio_base)); error->ipeir[ring->id] = I915_READ(RING_IPEIR(ring->mmio_base)); error->ipehr[ring->id] = I915_READ(RING_IPEHR(ring->mmio_base)); error->instdone[ring->id] = I915_READ(RING_INSTDONE(ring->mmio_base)); @@ -919,6 +1047,7 @@ static void i915_record_ring_state(struct drm_device *dev, error->bbaddr = I915_READ64(BB_ADDR); } } else { + error->faddr[ring->id] = I915_READ(DMA_FADD_I8XX); error->ipeir[ring->id] = I915_READ(IPEIR); error->ipehr[ring->id] = I915_READ(IPEHR); error->instdone[ring->id] = I915_READ(INSTDONE); @@ -1103,33 +1232,26 @@ static void i915_report_and_clear_eir(struct drm_device *dev) if (!eir) return; - printk(KERN_ERR "render error detected, EIR: 0x%08x\n", - eir); + pr_err("render error detected, EIR: 0x%08x\n", eir); if (IS_G4X(dev)) { if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) { u32 ipeir = I915_READ(IPEIR_I965); - printk(KERN_ERR " IPEIR: 0x%08x\n", - I915_READ(IPEIR_I965)); - printk(KERN_ERR " IPEHR: 0x%08x\n", - I915_READ(IPEHR_I965)); - printk(KERN_ERR " INSTDONE: 0x%08x\n", + pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965)); + pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965)); + pr_err(" INSTDONE: 0x%08x\n", I915_READ(INSTDONE_I965)); - printk(KERN_ERR " INSTPS: 0x%08x\n", - I915_READ(INSTPS)); - printk(KERN_ERR " INSTDONE1: 0x%08x\n", - I915_READ(INSTDONE1)); - printk(KERN_ERR " ACTHD: 0x%08x\n", - I915_READ(ACTHD_I965)); + pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS)); + pr_err(" INSTDONE1: 0x%08x\n", I915_READ(INSTDONE1)); + pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965)); I915_WRITE(IPEIR_I965, ipeir); POSTING_READ(IPEIR_I965); } if (eir & GM45_ERROR_PAGE_TABLE) { u32 pgtbl_err = I915_READ(PGTBL_ER); - printk(KERN_ERR "page table error\n"); - printk(KERN_ERR " PGTBL_ER: 0x%08x\n", - pgtbl_err); + pr_err("page table error\n"); + pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err); I915_WRITE(PGTBL_ER, pgtbl_err); POSTING_READ(PGTBL_ER); } @@ -1138,53 +1260,42 @@ static void i915_report_and_clear_eir(struct drm_device *dev) if (!IS_GEN2(dev)) { if (eir & I915_ERROR_PAGE_TABLE) { u32 pgtbl_err = I915_READ(PGTBL_ER); - printk(KERN_ERR "page table error\n"); - printk(KERN_ERR " PGTBL_ER: 0x%08x\n", - pgtbl_err); + pr_err("page table error\n"); + pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err); I915_WRITE(PGTBL_ER, pgtbl_err); POSTING_READ(PGTBL_ER); } } if (eir & I915_ERROR_MEMORY_REFRESH) { - printk(KERN_ERR "memory refresh error:\n"); + pr_err("memory refresh error:\n"); for_each_pipe(pipe) - printk(KERN_ERR "pipe %c stat: 0x%08x\n", + pr_err("pipe %c stat: 0x%08x\n", pipe_name(pipe), I915_READ(PIPESTAT(pipe))); /* pipestat has already been acked */ } if (eir & I915_ERROR_INSTRUCTION) { - printk(KERN_ERR "instruction error\n"); - printk(KERN_ERR " INSTPM: 0x%08x\n", - I915_READ(INSTPM)); + pr_err("instruction error\n"); + pr_err(" INSTPM: 0x%08x\n", I915_READ(INSTPM)); if (INTEL_INFO(dev)->gen < 4) { u32 ipeir = I915_READ(IPEIR); - printk(KERN_ERR " IPEIR: 0x%08x\n", - I915_READ(IPEIR)); - printk(KERN_ERR " IPEHR: 0x%08x\n", - I915_READ(IPEHR)); - printk(KERN_ERR " INSTDONE: 0x%08x\n", - I915_READ(INSTDONE)); - printk(KERN_ERR " ACTHD: 0x%08x\n", - I915_READ(ACTHD)); + pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR)); + pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR)); + pr_err(" INSTDONE: 0x%08x\n", I915_READ(INSTDONE)); + pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD)); I915_WRITE(IPEIR, ipeir); POSTING_READ(IPEIR); } else { u32 ipeir = I915_READ(IPEIR_I965); - printk(KERN_ERR " IPEIR: 0x%08x\n", - I915_READ(IPEIR_I965)); - printk(KERN_ERR " IPEHR: 0x%08x\n", - I915_READ(IPEHR_I965)); - printk(KERN_ERR " INSTDONE: 0x%08x\n", + pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965)); + pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965)); + pr_err(" INSTDONE: 0x%08x\n", I915_READ(INSTDONE_I965)); - printk(KERN_ERR " INSTPS: 0x%08x\n", - I915_READ(INSTPS)); - printk(KERN_ERR " INSTDONE1: 0x%08x\n", - I915_READ(INSTDONE1)); - printk(KERN_ERR " ACTHD: 0x%08x\n", - I915_READ(ACTHD_I965)); + pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS)); + pr_err(" INSTDONE1: 0x%08x\n", I915_READ(INSTDONE1)); + pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965)); I915_WRITE(IPEIR_I965, ipeir); POSTING_READ(IPEIR_I965); } @@ -1582,6 +1693,32 @@ static int ivybridge_enable_vblank(struct drm_device *dev, int pipe) return 0; } +static int valleyview_enable_vblank(struct drm_device *dev, int pipe) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + unsigned long irqflags; + u32 dpfl, imr; + + if (!i915_pipe_enabled(dev, pipe)) + return -EINVAL; + + spin_lock_irqsave(&dev_priv->irq_lock, irqflags); + dpfl = I915_READ(VLV_DPFLIPSTAT); + imr = I915_READ(VLV_IMR); + if (pipe == 0) { + dpfl |= PIPEA_VBLANK_INT_EN; + imr &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT; + } else { + dpfl |= PIPEA_VBLANK_INT_EN; + imr &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT; + } + I915_WRITE(VLV_DPFLIPSTAT, dpfl); + I915_WRITE(VLV_IMR, imr); + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); + + return 0; +} + /* Called from drm generic code, passed 'crtc' which * we use as a pipe index */ @@ -1623,6 +1760,28 @@ static void ivybridge_disable_vblank(struct drm_device *dev, int pipe) spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); } +static void valleyview_disable_vblank(struct drm_device *dev, int pipe) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + unsigned long irqflags; + u32 dpfl, imr; + + spin_lock_irqsave(&dev_priv->irq_lock, irqflags); + dpfl = I915_READ(VLV_DPFLIPSTAT); + imr = I915_READ(VLV_IMR); + if (pipe == 0) { + dpfl &= ~PIPEA_VBLANK_INT_EN; + imr |= I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT; + } else { + dpfl &= ~PIPEB_VBLANK_INT_EN; + imr |= I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT; + } + I915_WRITE(VLV_IMR, imr); + I915_WRITE(VLV_DPFLIPSTAT, dpfl); + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); +} + + /* Set the vblank monitor pipe */ int i915_vblank_pipe_set(struct drm_device *dev, void *data, @@ -1832,6 +1991,41 @@ static void ironlake_irq_preinstall(struct drm_device *dev) POSTING_READ(SDEIER); } +static void valleyview_irq_preinstall(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + int pipe; + + atomic_set(&dev_priv->irq_received, 0); + + INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func); + INIT_WORK(&dev_priv->error_work, i915_error_work_func); + + /* VLV magic */ + I915_WRITE(VLV_IMR, 0); + I915_WRITE(RING_IMR(RENDER_RING_BASE), 0); + I915_WRITE(RING_IMR(GEN6_BSD_RING_BASE), 0); + I915_WRITE(RING_IMR(BLT_RING_BASE), 0); + + /* and GT */ + I915_WRITE(GTIIR, I915_READ(GTIIR)); + I915_WRITE(GTIIR, I915_READ(GTIIR)); + I915_WRITE(GTIMR, 0xffffffff); + I915_WRITE(GTIER, 0x0); + POSTING_READ(GTIER); + + I915_WRITE(DPINVGTT, 0xff); + + I915_WRITE(PORT_HOTPLUG_EN, 0); + I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); + for_each_pipe(pipe) + I915_WRITE(PIPESTAT(pipe), 0xffff); + I915_WRITE(VLV_IIR, 0xffffffff); + I915_WRITE(VLV_IMR, 0xffffffff); + I915_WRITE(VLV_IER, 0x0); + POSTING_READ(VLV_IER); +} + /* * Enable digital hotplug on the PCH, and configure the DP short pulse * duration to 2ms (which is the minimum in the Display Port spec) @@ -1884,8 +2078,8 @@ static int ironlake_irq_postinstall(struct drm_device *dev) if (IS_GEN6(dev)) render_irqs = GT_USER_INTERRUPT | - GT_GEN6_BSD_USER_INTERRUPT | - GT_BLT_USER_INTERRUPT; + GEN6_BSD_USER_INTERRUPT | + GEN6_BLITTER_USER_INTERRUPT; else render_irqs = GT_USER_INTERRUPT | @@ -1957,8 +2151,8 @@ static int ivybridge_irq_postinstall(struct drm_device *dev) I915_WRITE(GTIIR, I915_READ(GTIIR)); I915_WRITE(GTIMR, dev_priv->gt_irq_mask); - render_irqs = GT_USER_INTERRUPT | GT_GEN6_BSD_USER_INTERRUPT | - GT_BLT_USER_INTERRUPT; + render_irqs = GT_USER_INTERRUPT | GEN6_BSD_USER_INTERRUPT | + GEN6_BLITTER_USER_INTERRUPT; I915_WRITE(GTIER, render_irqs); POSTING_READ(GTIER); @@ -1978,6 +2172,96 @@ static int ivybridge_irq_postinstall(struct drm_device *dev) return 0; } +static int valleyview_irq_postinstall(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + u32 render_irqs; + u32 enable_mask; + u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN); + u16 msid; + + enable_mask = I915_DISPLAY_PORT_INTERRUPT; + enable_mask |= I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT | + I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT; + + dev_priv->irq_mask = ~enable_mask; + + + DRM_INIT_WAITQUEUE(&dev_priv->ring[RCS].irq_queue); + DRM_INIT_WAITQUEUE(&dev_priv->ring[VCS].irq_queue); + DRM_INIT_WAITQUEUE(&dev_priv->ring[BCS].irq_queue); + + dev_priv->pipestat[0] = 0; + dev_priv->pipestat[1] = 0; + + dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; + + /* Hack for broken MSIs on VLV */ + pci_write_config_dword(dev_priv->dev->pdev, 0x94, 0xfee00000); + pci_read_config_word(dev->pdev, 0x98, &msid); + msid &= 0xff; /* mask out delivery bits */ + msid |= (1<<14); + pci_write_config_word(dev_priv->dev->pdev, 0x98, msid); + + I915_WRITE(VLV_IMR, dev_priv->irq_mask); + I915_WRITE(VLV_IER, enable_mask); + I915_WRITE(VLV_IIR, 0xffffffff); + I915_WRITE(PIPESTAT(0), 0xffff); + I915_WRITE(PIPESTAT(1), 0xffff); + POSTING_READ(VLV_IER); + + I915_WRITE(VLV_IIR, 0xffffffff); + I915_WRITE(VLV_IIR, 0xffffffff); + + render_irqs = GT_GEN6_BLT_FLUSHDW_NOTIFY_INTERRUPT | + GT_GEN6_BLT_CS_ERROR_INTERRUPT | + GT_GEN6_BLT_USER_INTERRUPT | + GT_GEN6_BSD_USER_INTERRUPT | + GT_GEN6_BSD_CS_ERROR_INTERRUPT | + GT_GEN7_L3_PARITY_ERROR_INTERRUPT | + GT_PIPE_NOTIFY | + GT_RENDER_CS_ERROR_INTERRUPT | + GT_SYNC_STATUS | + GT_USER_INTERRUPT; + + dev_priv->gt_irq_mask = ~render_irqs; + + I915_WRITE(GTIIR, I915_READ(GTIIR)); + I915_WRITE(GTIIR, I915_READ(GTIIR)); + I915_WRITE(GTIMR, 0); + I915_WRITE(GTIER, render_irqs); + POSTING_READ(GTIER); + + /* ack & enable invalid PTE error interrupts */ +#if 0 /* FIXME: add support to irq handler for checking these bits */ + I915_WRITE(DPINVGTT, DPINVGTT_STATUS_MASK); + I915_WRITE(DPINVGTT, DPINVGTT_EN_MASK); +#endif + + I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE); +#if 0 /* FIXME: check register definitions; some have moved */ + /* Note HDMI and DP share bits */ + if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS) + hotplug_en |= HDMIB_HOTPLUG_INT_EN; + if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS) + hotplug_en |= HDMIC_HOTPLUG_INT_EN; + if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS) + hotplug_en |= HDMID_HOTPLUG_INT_EN; + if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS) + hotplug_en |= SDVOC_HOTPLUG_INT_EN; + if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS) + hotplug_en |= SDVOB_HOTPLUG_INT_EN; + if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) { + hotplug_en |= CRT_HOTPLUG_INT_EN; + hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50; + } +#endif + + I915_WRITE(PORT_HOTPLUG_EN, hotplug_en); + + return 0; +} + static void i915_driver_irq_preinstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -2081,6 +2365,30 @@ static int i915_driver_irq_postinstall(struct drm_device *dev) return 0; } +static void valleyview_irq_uninstall(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + int pipe; + + if (!dev_priv) + return; + + dev_priv->vblank_pipe = 0; + + for_each_pipe(pipe) + I915_WRITE(PIPESTAT(pipe), 0xffff); + + I915_WRITE(HWSTAM, 0xffffffff); + I915_WRITE(PORT_HOTPLUG_EN, 0); + I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); + for_each_pipe(pipe) + I915_WRITE(PIPESTAT(pipe), 0xffff); + I915_WRITE(VLV_IIR, 0xffffffff); + I915_WRITE(VLV_IMR, 0xffffffff); + I915_WRITE(VLV_IER, 0x0); + POSTING_READ(VLV_IER); +} + static void ironlake_irq_uninstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -2136,7 +2444,8 @@ void intel_irq_init(struct drm_device *dev) { dev->driver->get_vblank_counter = i915_get_vblank_counter; dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ - if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev)) { + if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev) || + IS_VALLEYVIEW(dev)) { dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */ dev->driver->get_vblank_counter = gm45_get_vblank_counter; } @@ -2147,7 +2456,14 @@ void intel_irq_init(struct drm_device *dev) dev->driver->get_vblank_timestamp = NULL; dev->driver->get_scanout_position = i915_get_crtc_scanoutpos; - if (IS_IVYBRIDGE(dev)) { + if (IS_VALLEYVIEW(dev)) { + dev->driver->irq_handler = valleyview_irq_handler; + dev->driver->irq_preinstall = valleyview_irq_preinstall; + dev->driver->irq_postinstall = valleyview_irq_postinstall; + dev->driver->irq_uninstall = valleyview_irq_uninstall; + dev->driver->enable_vblank = valleyview_enable_vblank; + dev->driver->disable_vblank = valleyview_disable_vblank; + } else if (IS_IVYBRIDGE(dev)) { /* Share pre & uninstall handlers with ILK/SNB */ dev->driver->irq_handler = ivybridge_irq_handler; dev->driver->irq_preinstall = ironlake_irq_preinstall; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 2abf4eb94039..6924f44a88df 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -27,6 +27,8 @@ #define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a))) +#define _PORT(port, a, b) ((a) + (port)*((b)-(a))) + /* * The Bridge device's PCI config space has information about the * fb aperture size and the amount of pre-reserved memory. @@ -301,6 +303,61 @@ #define DEBUG_RESET_RENDER (1<<8) #define DEBUG_RESET_DISPLAY (1<<9) +/* + * DPIO - a special bus for various display related registers to hide behind: + * 0x800c: m1, m2, n, p1, p2, k dividers + * 0x8014: REF and SFR select + * 0x8014: N divider, VCO select + * 0x801c/3c: core clock bits + * 0x8048/68: low pass filter coefficients + * 0x8100: fast clock controls + */ +#define DPIO_PKT 0x2100 +#define DPIO_RID (0<<24) +#define DPIO_OP_WRITE (1<<16) +#define DPIO_OP_READ (0<<16) +#define DPIO_PORTID (0x12<<8) +#define DPIO_BYTE (0xf<<4) +#define DPIO_BUSY (1<<0) /* status only */ +#define DPIO_DATA 0x2104 +#define DPIO_REG 0x2108 +#define DPIO_CTL 0x2110 +#define DPIO_MODSEL1 (1<<3) /* if ref clk b == 27 */ +#define DPIO_MODSEL0 (1<<2) /* if ref clk a == 27 */ +#define DPIO_SFR_BYPASS (1<<1) +#define DPIO_RESET (1<<0) + +#define _DPIO_DIV_A 0x800c +#define DPIO_POST_DIV_SHIFT (28) /* 3 bits */ +#define DPIO_K_SHIFT (24) /* 4 bits */ +#define DPIO_P1_SHIFT (21) /* 3 bits */ +#define DPIO_P2_SHIFT (16) /* 5 bits */ +#define DPIO_N_SHIFT (12) /* 4 bits */ +#define DPIO_ENABLE_CALIBRATION (1<<11) +#define DPIO_M1DIV_SHIFT (8) /* 3 bits */ +#define DPIO_M2DIV_MASK 0xff +#define _DPIO_DIV_B 0x802c +#define DPIO_DIV(pipe) _PIPE(pipe, _DPIO_DIV_A, _DPIO_DIV_B) + +#define _DPIO_REFSFR_A 0x8014 +#define DPIO_REFSEL_OVERRIDE 27 +#define DPIO_PLL_MODESEL_SHIFT 24 /* 3 bits */ +#define DPIO_BIAS_CURRENT_CTL_SHIFT 21 /* 3 bits, always 0x7 */ +#define DPIO_PLL_REFCLK_SEL_SHIFT 16 /* 2 bits */ +#define DPIO_DRIVER_CTL_SHIFT 12 /* always set to 0x8 */ +#define DPIO_CLK_BIAS_CTL_SHIFT 8 /* always set to 0x5 */ +#define _DPIO_REFSFR_B 0x8034 +#define DPIO_REFSFR(pipe) _PIPE(pipe, _DPIO_REFSFR_A, _DPIO_REFSFR_B) + +#define _DPIO_CORE_CLK_A 0x801c +#define _DPIO_CORE_CLK_B 0x803c +#define DPIO_CORE_CLK(pipe) _PIPE(pipe, _DPIO_CORE_CLK_A, _DPIO_CORE_CLK_B) + +#define _DPIO_LFP_COEFF_A 0x8048 +#define _DPIO_LFP_COEFF_B 0x8068 +#define DPIO_LFP_COEFF(pipe) _PIPE(pipe, _DPIO_LFP_COEFF_A, _DPIO_LFP_COEFF_B) + +#define DPIO_FASTCLK_DISABLE 0x8100 /* * Fence registers @@ -417,6 +474,7 @@ #define INSTDONE 0x02090 #define NOPID 0x02094 #define HWSTAM 0x02098 +#define DMA_FADD_I8XX 0x020d0 #define ERROR_GEN6 0x040a0 @@ -455,6 +513,11 @@ #define IIR 0x020a4 #define IMR 0x020a8 #define ISR 0x020ac +#define VLV_IIR_RW 0x182084 +#define VLV_IER 0x1820a0 +#define VLV_IIR 0x1820a4 +#define VLV_IMR 0x1820a8 +#define VLV_ISR 0x1820ac #define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18) #define I915_DISPLAY_PORT_INTERRUPT (1<<17) #define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15) @@ -578,7 +641,12 @@ #define ECO_GATING_CX_ONLY (1<<3) #define ECO_FLIP_DONE (1<<0) -/* GEN6 interrupt control */ +#define CACHE_MODE_1 0x7004 /* IVB+ */ +#define PIXEL_SUBSPAN_COLLECT_OPT_DISABLE (1<<6) + +/* GEN6 interrupt control + * Note that the per-ring interrupt bits do alias with the global interrupt bits + * in GTIMR. */ #define GEN6_RENDER_HWSTAM 0x2098 #define GEN6_RENDER_IMR 0x20a8 #define GEN6_RENDER_CONTEXT_SWITCH_INTERRUPT (1 << 8) @@ -742,9 +810,9 @@ #define GMBUS_PORT_PANEL 3 #define GMBUS_PORT_DPC 4 /* HDMIC */ #define GMBUS_PORT_DPB 5 /* SDVO, HDMIB */ - /* 6 reserved */ -#define GMBUS_PORT_DPD 7 /* HDMID */ -#define GMBUS_NUM_PORTS 8 +#define GMBUS_PORT_DPD 6 /* HDMID */ +#define GMBUS_PORT_RESERVED 7 /* 7 reserved */ +#define GMBUS_NUM_PORTS (GMBUS_PORT_DPD - GMBUS_PORT_SSC + 1) #define GMBUS1 0x5104 /* command/status */ #define GMBUS_SW_CLR_INT (1<<31) #define GMBUS_SW_RDY (1<<30) @@ -796,7 +864,9 @@ #define DPLL(pipe) _PIPE(pipe, _DPLL_A, _DPLL_B) #define DPLL_VCO_ENABLE (1 << 31) #define DPLL_DVO_HIGH_SPEED (1 << 30) +#define DPLL_EXT_BUFFER_ENABLE_VLV (1 << 30) #define DPLL_SYNCLOCK_ENABLE (1 << 29) +#define DPLL_REFA_CLK_ENABLE_VLV (1 << 29) #define DPLL_VGA_MODE_DIS (1 << 28) #define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ #define DPLLB_MODE_LVDS (2 << 26) /* i915 */ @@ -808,6 +878,7 @@ #define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ #define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ #define DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW 0x00ff8000 /* Pineview */ +#define DPLL_INTEGRATED_CLOCK_VLV (1<<13) #define SRX_INDEX 0x3c4 #define SRX_DATA 0x3c5 @@ -903,6 +974,7 @@ #define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 #define _DPLL_B_MD 0x06020 /* 965+ only */ #define DPLL_MD(pipe) _PIPE(pipe, _DPLL_A_MD, _DPLL_B_MD) + #define _FPA0 0x06040 #define _FPA1 0x06044 #define _FPB0 0x06048 @@ -1043,6 +1115,9 @@ #define RAMCLK_GATE_D 0x6210 /* CRL only */ #define DEUC 0x6214 /* CRL only */ +#define FW_BLC_SELF_VLV 0x6500 +#define FW_CSPWRDWNEN (1<<15) + /* * Palette regs */ @@ -2421,23 +2496,30 @@ #define PIPECONF_DITHER_TYPE_TEMP (3<<2) #define _PIPEASTAT 0x70024 #define PIPE_FIFO_UNDERRUN_STATUS (1UL<<31) +#define SPRITE1_FLIPDONE_INT_EN_VLV (1UL<<30) #define PIPE_CRC_ERROR_ENABLE (1UL<<29) #define PIPE_CRC_DONE_ENABLE (1UL<<28) #define PIPE_GMBUS_EVENT_ENABLE (1UL<<27) +#define PLANE_FLIP_DONE_INT_EN_VLV (1UL<<26) #define PIPE_HOTPLUG_INTERRUPT_ENABLE (1UL<<26) #define PIPE_VSYNC_INTERRUPT_ENABLE (1UL<<25) #define PIPE_DISPLAY_LINE_COMPARE_ENABLE (1UL<<24) #define PIPE_DPST_EVENT_ENABLE (1UL<<23) +#define SPRITE0_FLIP_DONE_INT_EN_VLV (1UL<<26) #define PIPE_LEGACY_BLC_EVENT_ENABLE (1UL<<22) #define PIPE_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21) #define PIPE_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20) #define PIPE_HOTPLUG_TV_INTERRUPT_ENABLE (1UL<<18) /* pre-965 */ #define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */ #define PIPE_VBLANK_INTERRUPT_ENABLE (1UL<<17) +#define PIPEA_HBLANK_INT_EN_VLV (1UL<<16) #define PIPE_OVERLAY_UPDATED_ENABLE (1UL<<16) +#define SPRITE1_FLIPDONE_INT_STATUS_VLV (1UL<<15) +#define SPRITE0_FLIPDONE_INT_STATUS_VLV (1UL<<15) #define PIPE_CRC_ERROR_INTERRUPT_STATUS (1UL<<13) #define PIPE_CRC_DONE_INTERRUPT_STATUS (1UL<<12) #define PIPE_GMBUS_INTERRUPT_STATUS (1UL<<11) +#define PLANE_FLIPDONE_INT_STATUS_VLV (1UL<<10) #define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL<<10) #define PIPE_VSYNC_INTERRUPT_STATUS (1UL<<9) #define PIPE_DISPLAY_LINE_COMPARE_STATUS (1UL<<8) @@ -2462,6 +2544,40 @@ #define PIPEFRAMEPIXEL(pipe) _PIPE(pipe, _PIPEAFRAMEPIXEL, _PIPEBFRAMEPIXEL) #define PIPESTAT(pipe) _PIPE(pipe, _PIPEASTAT, _PIPEBSTAT) +#define VLV_DPFLIPSTAT 0x70028 +#define PIPEB_LINE_COMPARE_STATUS (1<<29) +#define PIPEB_HLINE_INT_EN (1<<28) +#define PIPEB_VBLANK_INT_EN (1<<27) +#define SPRITED_FLIPDONE_INT_EN (1<<26) +#define SPRITEC_FLIPDONE_INT_EN (1<<25) +#define PLANEB_FLIPDONE_INT_EN (1<<24) +#define PIPEA_LINE_COMPARE_STATUS (1<<21) +#define PIPEA_HLINE_INT_EN (1<<20) +#define PIPEA_VBLANK_INT_EN (1<<19) +#define SPRITEB_FLIPDONE_INT_EN (1<<18) +#define SPRITEA_FLIPDONE_INT_EN (1<<17) +#define PLANEA_FLIPDONE_INT_EN (1<<16) + +#define DPINVGTT 0x7002c /* VLV only */ +#define CURSORB_INVALID_GTT_INT_EN (1<<23) +#define CURSORA_INVALID_GTT_INT_EN (1<<22) +#define SPRITED_INVALID_GTT_INT_EN (1<<21) +#define SPRITEC_INVALID_GTT_INT_EN (1<<20) +#define PLANEB_INVALID_GTT_INT_EN (1<<19) +#define SPRITEB_INVALID_GTT_INT_EN (1<<18) +#define SPRITEA_INVALID_GTT_INT_EN (1<<17) +#define PLANEA_INVALID_GTT_INT_EN (1<<16) +#define DPINVGTT_EN_MASK 0xff0000 +#define CURSORB_INVALID_GTT_STATUS (1<<7) +#define CURSORA_INVALID_GTT_STATUS (1<<6) +#define SPRITED_INVALID_GTT_STATUS (1<<5) +#define SPRITEC_INVALID_GTT_STATUS (1<<4) +#define PLANEB_INVALID_GTT_STATUS (1<<3) +#define SPRITEB_INVALID_GTT_STATUS (1<<2) +#define SPRITEA_INVALID_GTT_STATUS (1<<1) +#define PLANEA_INVALID_GTT_STATUS (1<<0) +#define DPINVGTT_STATUS_MASK 0xff + #define DSPARB 0x70030 #define DSPARB_CSTART_MASK (0x7f << 7) #define DSPARB_CSTART_SHIFT 7 @@ -2491,11 +2607,28 @@ #define DSPFW_HPLL_CURSOR_MASK (0x3f<<16) #define DSPFW_HPLL_SR_MASK (0x1ff) +/* drain latency register values*/ +#define DRAIN_LATENCY_PRECISION_32 32 +#define DRAIN_LATENCY_PRECISION_16 16 +#define VLV_DDL1 0x70050 +#define DDL_CURSORA_PRECISION_32 (1<<31) +#define DDL_CURSORA_PRECISION_16 (0<<31) +#define DDL_CURSORA_SHIFT 24 +#define DDL_PLANEA_PRECISION_32 (1<<7) +#define DDL_PLANEA_PRECISION_16 (0<<7) +#define VLV_DDL2 0x70054 +#define DDL_CURSORB_PRECISION_32 (1<<31) +#define DDL_CURSORB_PRECISION_16 (0<<31) +#define DDL_CURSORB_SHIFT 24 +#define DDL_PLANEB_PRECISION_32 (1<<7) +#define DDL_PLANEB_PRECISION_16 (0<<7) + /* FIFO watermark sizes etc */ #define G4X_FIFO_LINE_SIZE 64 #define I915_FIFO_LINE_SIZE 64 #define I830_FIFO_LINE_SIZE 32 +#define VALLEYVIEW_FIFO_SIZE 255 #define G4X_FIFO_SIZE 127 #define I965_FIFO_SIZE 512 #define I945_FIFO_SIZE 127 @@ -2503,6 +2636,7 @@ #define I855GM_FIFO_SIZE 127 /* In cachelines */ #define I830_FIFO_SIZE 95 +#define VALLEYVIEW_MAX_WM 0xff #define G4X_MAX_WM 0x3f #define I915_MAX_WM 0x3f @@ -2517,6 +2651,7 @@ #define PINEVIEW_CURSOR_DFT_WM 0 #define PINEVIEW_CURSOR_GUARD_WM 5 +#define VALLEYVIEW_CURSOR_MAX_WM 64 #define I965_CURSOR_FIFO 64 #define I965_CURSOR_MAX_WM 32 #define I965_CURSOR_DFT_WM 8 @@ -3064,18 +3199,28 @@ #define DE_PIPEB_VBLANK_IVB (1<<5) #define DE_PIPEA_VBLANK_IVB (1<<0) +#define VLV_MASTER_IER 0x4400c /* Gunit master IER */ +#define MASTER_INTERRUPT_ENABLE (1<<31) + #define DEISR 0x44000 #define DEIMR 0x44004 #define DEIIR 0x44008 #define DEIER 0x4400c -/* GT interrupt */ -#define GT_PIPE_NOTIFY (1 << 4) -#define GT_SYNC_STATUS (1 << 2) -#define GT_USER_INTERRUPT (1 << 0) -#define GT_BSD_USER_INTERRUPT (1 << 5) -#define GT_GEN6_BSD_USER_INTERRUPT (1 << 12) -#define GT_BLT_USER_INTERRUPT (1 << 22) +/* GT interrupt. + * Note that for gen6+ the ring-specific interrupt bits do alias with the + * corresponding bits in the per-ring interrupt control registers. */ +#define GT_GEN6_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26) +#define GT_GEN6_BLT_CS_ERROR_INTERRUPT (1 << 25) +#define GT_GEN6_BLT_USER_INTERRUPT (1 << 22) +#define GT_GEN6_BSD_CS_ERROR_INTERRUPT (1 << 15) +#define GT_GEN6_BSD_USER_INTERRUPT (1 << 12) +#define GT_BSD_USER_INTERRUPT (1 << 5) /* ilk only */ +#define GT_GEN7_L3_PARITY_ERROR_INTERRUPT (1 << 5) +#define GT_PIPE_NOTIFY (1 << 4) +#define GT_RENDER_CS_ERROR_INTERRUPT (1 << 3) +#define GT_SYNC_STATUS (1 << 2) +#define GT_USER_INTERRUPT (1 << 0) #define GTISR 0x44010 #define GTIMR 0x44014 @@ -3328,6 +3473,21 @@ #define TVIDEO_DIP_DATA(pipe) _PIPE(pipe, _VIDEO_DIP_DATA_A, _VIDEO_DIP_DATA_B) #define TVIDEO_DIP_GCP(pipe) _PIPE(pipe, _VIDEO_DIP_GCP_A, _VIDEO_DIP_GCP_B) +#define VLV_VIDEO_DIP_CTL_A 0x60220 +#define VLV_VIDEO_DIP_DATA_A 0x60208 +#define VLV_VIDEO_DIP_GDCP_PAYLOAD_A 0x60210 + +#define VLV_VIDEO_DIP_CTL_B 0x61170 +#define VLV_VIDEO_DIP_DATA_B 0x61174 +#define VLV_VIDEO_DIP_GDCP_PAYLOAD_B 0x61178 + +#define VLV_TVIDEO_DIP_CTL(pipe) \ + _PIPE(pipe, VLV_VIDEO_DIP_CTL_A, VLV_VIDEO_DIP_CTL_B) +#define VLV_TVIDEO_DIP_DATA(pipe) \ + _PIPE(pipe, VLV_VIDEO_DIP_DATA_A, VLV_VIDEO_DIP_DATA_B) +#define VLV_TVIDEO_DIP_GCP(pipe) \ + _PIPE(pipe, VLV_VIDEO_DIP_GDCP_PAYLOAD_A, VLV_VIDEO_DIP_GDCP_PAYLOAD_B) + #define _TRANS_HTOTAL_B 0xe1000 #define _TRANS_HBLANK_B 0xe1004 #define _TRANS_HSYNC_B 0xe1008 @@ -3548,6 +3708,7 @@ #define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16) /* or SDVOB */ +#define VLV_HDMIB 0x61140 #define HDMIB 0xe1140 #define PORT_ENABLE (1 << 31) #define TRANSCODER(pipe) ((pipe) << 30) @@ -3713,6 +3874,8 @@ #define EDP_LINK_TRAIN_VOL_EMP_MASK_IVB (0x3f<<22) #define FORCEWAKE 0xA18C +#define FORCEWAKE_VLV 0x1300b0 +#define FORCEWAKE_ACK_VLV 0x1300b4 #define FORCEWAKE_ACK 0x130090 #define FORCEWAKE_MT 0xa188 /* multi-threaded */ #define FORCEWAKE_MT_ACK 0x130040 @@ -3866,4 +4029,193 @@ #define AUD_CONFIG_PIXEL_CLOCK_HDMI (0xf << 16) #define AUD_CONFIG_DISABLE_NCTS (1 << 3) +/* HSW Power Wells */ +#define HSW_PWR_WELL_CTL1 0x45400 /* BIOS */ +#define HSW_PWR_WELL_CTL2 0x45404 /* Driver */ +#define HSW_PWR_WELL_CTL3 0x45408 /* KVMR */ +#define HSW_PWR_WELL_CTL4 0x4540C /* Debug */ +#define HSW_PWR_WELL_ENABLE (1<<31) +#define HSW_PWR_WELL_STATE (1<<30) +#define HSW_PWR_WELL_CTL5 0x45410 +#define HSW_PWR_WELL_ENABLE_SINGLE_STEP (1<<31) +#define HSW_PWR_WELL_PWR_GATE_OVERRIDE (1<<20) +#define HSW_PWR_WELL_FORCE_ON (1<<19) +#define HSW_PWR_WELL_CTL6 0x45414 + +/* Per-pipe DDI Function Control */ +#define PIPE_DDI_FUNC_CTL_A 0x60400 +#define PIPE_DDI_FUNC_CTL_B 0x61400 +#define PIPE_DDI_FUNC_CTL_C 0x62400 +#define PIPE_DDI_FUNC_CTL_EDP 0x6F400 +#define DDI_FUNC_CTL(pipe) _PIPE(pipe, \ + PIPE_DDI_FUNC_CTL_A, \ + PIPE_DDI_FUNC_CTL_B) +#define PIPE_DDI_FUNC_ENABLE (1<<31) +/* Those bits are ignored by pipe EDP since it can only connect to DDI A */ +#define PIPE_DDI_PORT_MASK (0xf<<28) +#define PIPE_DDI_SELECT_PORT(x) ((x)<<28) +#define PIPE_DDI_MODE_SELECT_HDMI (0<<24) +#define PIPE_DDI_MODE_SELECT_DVI (1<<24) +#define PIPE_DDI_MODE_SELECT_DP_SST (2<<24) +#define PIPE_DDI_MODE_SELECT_DP_MST (3<<24) +#define PIPE_DDI_MODE_SELECT_FDI (4<<24) +#define PIPE_DDI_BPC_8 (0<<20) +#define PIPE_DDI_BPC_10 (1<<20) +#define PIPE_DDI_BPC_6 (2<<20) +#define PIPE_DDI_BPC_12 (3<<20) +#define PIPE_DDI_BFI_ENABLE (1<<4) +#define PIPE_DDI_PORT_WIDTH_X1 (0<<1) +#define PIPE_DDI_PORT_WIDTH_X2 (1<<1) +#define PIPE_DDI_PORT_WIDTH_X4 (3<<1) + +/* DisplayPort Transport Control */ +#define DP_TP_CTL_A 0x64040 +#define DP_TP_CTL_B 0x64140 +#define DP_TP_CTL(port) _PORT(port, \ + DP_TP_CTL_A, \ + DP_TP_CTL_B) +#define DP_TP_CTL_ENABLE (1<<31) +#define DP_TP_CTL_MODE_SST (0<<27) +#define DP_TP_CTL_MODE_MST (1<<27) +#define DP_TP_CTL_ENHANCED_FRAME_ENABLE (1<<18) +#define DP_TP_CTL_FDI_AUTOTRAIN (1<<15) +#define DP_TP_CTL_LINK_TRAIN_MASK (7<<8) +#define DP_TP_CTL_LINK_TRAIN_PAT1 (0<<8) +#define DP_TP_CTL_LINK_TRAIN_PAT2 (1<<8) +#define DP_TP_CTL_LINK_TRAIN_NORMAL (3<<8) + +/* DisplayPort Transport Status */ +#define DP_TP_STATUS_A 0x64044 +#define DP_TP_STATUS_B 0x64144 +#define DP_TP_STATUS(port) _PORT(port, \ + DP_TP_STATUS_A, \ + DP_TP_STATUS_B) +#define DP_TP_STATUS_AUTOTRAIN_DONE (1<<12) + +/* DDI Buffer Control */ +#define DDI_BUF_CTL_A 0x64000 +#define DDI_BUF_CTL_B 0x64100 +#define DDI_BUF_CTL(port) _PORT(port, \ + DDI_BUF_CTL_A, \ + DDI_BUF_CTL_B) +#define DDI_BUF_CTL_ENABLE (1<<31) +#define DDI_BUF_EMP_400MV_0DB_HSW (0<<24) /* Sel0 */ +#define DDI_BUF_EMP_400MV_3_5DB_HSW (1<<24) /* Sel1 */ +#define DDI_BUF_EMP_400MV_6DB_HSW (2<<24) /* Sel2 */ +#define DDI_BUF_EMP_400MV_9_5DB_HSW (3<<24) /* Sel3 */ +#define DDI_BUF_EMP_600MV_0DB_HSW (4<<24) /* Sel4 */ +#define DDI_BUF_EMP_600MV_3_5DB_HSW (5<<24) /* Sel5 */ +#define DDI_BUF_EMP_600MV_6DB_HSW (6<<24) /* Sel6 */ +#define DDI_BUF_EMP_800MV_0DB_HSW (7<<24) /* Sel7 */ +#define DDI_BUF_EMP_800MV_3_5DB_HSW (8<<24) /* Sel8 */ +#define DDI_BUF_EMP_MASK (0xf<<24) +#define DDI_BUF_IS_IDLE (1<<7) +#define DDI_PORT_WIDTH_X1 (0<<1) +#define DDI_PORT_WIDTH_X2 (1<<1) +#define DDI_PORT_WIDTH_X4 (3<<1) +#define DDI_INIT_DISPLAY_DETECTED (1<<0) + +/* DDI Buffer Translations */ +#define DDI_BUF_TRANS_A 0x64E00 +#define DDI_BUF_TRANS_B 0x64E60 +#define DDI_BUF_TRANS(port) _PORT(port, \ + DDI_BUF_TRANS_A, \ + DDI_BUF_TRANS_B) + +/* Sideband Interface (SBI) is programmed indirectly, via + * SBI_ADDR, which contains the register offset; and SBI_DATA, + * which contains the payload */ +#define SBI_ADDR 0xC6000 +#define SBI_DATA 0xC6004 +#define SBI_CTL_STAT 0xC6008 +#define SBI_CTL_OP_CRRD (0x6<<8) +#define SBI_CTL_OP_CRWR (0x7<<8) +#define SBI_RESPONSE_FAIL (0x1<<1) +#define SBI_RESPONSE_SUCCESS (0x0<<1) +#define SBI_BUSY (0x1<<0) +#define SBI_READY (0x0<<0) + +/* SBI offsets */ +#define SBI_SSCDIVINTPHASE6 0x0600 +#define SBI_SSCDIVINTPHASE_DIVSEL_MASK ((0x7f)<<1) +#define SBI_SSCDIVINTPHASE_DIVSEL(x) ((x)<<1) +#define SBI_SSCDIVINTPHASE_INCVAL_MASK ((0x7f)<<8) +#define SBI_SSCDIVINTPHASE_INCVAL(x) ((x)<<8) +#define SBI_SSCDIVINTPHASE_DIR(x) ((x)<<15) +#define SBI_SSCDIVINTPHASE_PROPAGATE (1<<0) +#define SBI_SSCCTL 0x020c +#define SBI_SSCCTL6 0x060C +#define SBI_SSCCTL_DISABLE (1<<0) +#define SBI_SSCAUXDIV6 0x0610 +#define SBI_SSCAUXDIV_FINALDIV2SEL(x) ((x)<<4) +#define SBI_DBUFF0 0x2a00 + +/* LPT PIXCLK_GATE */ +#define PIXCLK_GATE 0xC6020 +#define PIXCLK_GATE_UNGATE 1<<0 +#define PIXCLK_GATE_GATE 0<<0 + +/* SPLL */ +#define SPLL_CTL 0x46020 +#define SPLL_PLL_ENABLE (1<<31) +#define SPLL_PLL_SCC (1<<28) +#define SPLL_PLL_NON_SCC (2<<28) +#define SPLL_PLL_FREQ_810MHz (0<<26) +#define SPLL_PLL_FREQ_1350MHz (1<<26) + +/* WRPLL */ +#define WRPLL_CTL1 0x46040 +#define WRPLL_CTL2 0x46060 +#define WRPLL_PLL_ENABLE (1<<31) +#define WRPLL_PLL_SELECT_SSC (0x01<<28) +#define WRPLL_PLL_SELECT_NON_SCC (0x02<<28) +#define WRPLL_PLL_SELECT_LCPLL_2700 (0x03<<28) + +/* Port clock selection */ +#define PORT_CLK_SEL_A 0x46100 +#define PORT_CLK_SEL_B 0x46104 +#define PORT_CLK_SEL(port) _PORT(port, \ + PORT_CLK_SEL_A, \ + PORT_CLK_SEL_B) +#define PORT_CLK_SEL_LCPLL_2700 (0<<29) +#define PORT_CLK_SEL_LCPLL_1350 (1<<29) +#define PORT_CLK_SEL_LCPLL_810 (2<<29) +#define PORT_CLK_SEL_SPLL (3<<29) +#define PORT_CLK_SEL_WRPLL1 (4<<29) +#define PORT_CLK_SEL_WRPLL2 (5<<29) + +/* Pipe clock selection */ +#define PIPE_CLK_SEL_A 0x46140 +#define PIPE_CLK_SEL_B 0x46144 +#define PIPE_CLK_SEL(pipe) _PIPE(pipe, \ + PIPE_CLK_SEL_A, \ + PIPE_CLK_SEL_B) +/* For each pipe, we need to select the corresponding port clock */ +#define PIPE_CLK_SEL_DISABLED (0x0<<29) +#define PIPE_CLK_SEL_PORT(x) ((x+1)<<29) + +/* LCPLL Control */ +#define LCPLL_CTL 0x130040 +#define LCPLL_PLL_DISABLE (1<<31) +#define LCPLL_PLL_LOCK (1<<30) +#define LCPLL_CD_CLOCK_DISABLE (1<<25) +#define LCPLL_CD2X_CLOCK_DISABLE (1<<23) + +/* Pipe WM_LINETIME - watermark line time */ +#define PIPE_WM_LINETIME_A 0x45270 +#define PIPE_WM_LINETIME_B 0x45274 +#define PIPE_WM_LINETIME(pipe) _PIPE(pipe, \ + PIPE_WM_LINETIME_A, \ + PIPE_WM_LINETIME_A) +#define PIPE_WM_LINETIME_MASK (0x1ff) +#define PIPE_WM_LINETIME_TIME(x) ((x)) +#define PIPE_WM_LINETIME_IPS_LINETIME_MASK (0x1ff<<16) +#define PIPE_WM_LINETIME_IPS_LINETIME(x) ((x)<<16) + +/* SFUSE_STRAP */ +#define SFUSE_STRAP 0xc2014 +#define SFUSE_STRAP_DDIB_DETECTED (1<<2) +#define SFUSE_STRAP_DDIC_DETECTED (1<<1) +#define SFUSE_STRAP_DDID_DETECTED (1<<0) + #endif /* _I915_REG_H_ */ diff --git a/drivers/gpu/drm/i915/intel_acpi.c b/drivers/gpu/drm/i915/intel_acpi.c index bae3edf956a4..f152b2a7fc54 100644 --- a/drivers/gpu/drm/i915/intel_acpi.c +++ b/drivers/gpu/drm/i915/intel_acpi.c @@ -182,8 +182,6 @@ static void intel_dsm_platform_mux_info(void) DRM_DEBUG_DRIVER(" hpd mux info: %s\n", intel_dsm_mux_type(info->buffer.pointer[3])); } - } else { - DRM_ERROR("MUX INFO call failed\n"); } out: diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index b48fc2a8410c..353459362f6f 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -174,6 +174,28 @@ get_lvds_dvo_timing(const struct bdb_lvds_lfp_data *lvds_lfp_data, return (struct lvds_dvo_timing *)(entry + dvo_timing_offset); } +/* get lvds_fp_timing entry + * this function may return NULL if the corresponding entry is invalid + */ +static const struct lvds_fp_timing * +get_lvds_fp_timing(const struct bdb_header *bdb, + const struct bdb_lvds_lfp_data *data, + const struct bdb_lvds_lfp_data_ptrs *ptrs, + int index) +{ + size_t data_ofs = (const u8 *)data - (const u8 *)bdb; + u16 data_size = ((const u16 *)data)[-1]; /* stored in header */ + size_t ofs; + + if (index >= ARRAY_SIZE(ptrs->ptr)) + return NULL; + ofs = ptrs->ptr[index].fp_timing_offset; + if (ofs < data_ofs || + ofs + sizeof(struct lvds_fp_timing) > data_ofs + data_size) + return NULL; + return (const struct lvds_fp_timing *)((const u8 *)bdb + ofs); +} + /* Try to find integrated panel data */ static void parse_lfp_panel_data(struct drm_i915_private *dev_priv, @@ -183,6 +205,7 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv, const struct bdb_lvds_lfp_data *lvds_lfp_data; const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs; const struct lvds_dvo_timing *panel_dvo_timing; + const struct lvds_fp_timing *fp_timing; struct drm_display_mode *panel_fixed_mode; int i, downclock; @@ -244,6 +267,19 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv, "Normal Clock %dKHz, downclock %dKHz\n", panel_fixed_mode->clock, 10*downclock); } + + fp_timing = get_lvds_fp_timing(bdb, lvds_lfp_data, + lvds_lfp_data_ptrs, + lvds_options->panel_type); + if (fp_timing) { + /* check the resolution, just to be sure */ + if (fp_timing->x_res == panel_fixed_mode->hdisplay && + fp_timing->y_res == panel_fixed_mode->vdisplay) { + dev_priv->bios_lvds_val = fp_timing->lvds_reg_val; + DRM_DEBUG_KMS("VBT initial LVDS value %x\n", + dev_priv->bios_lvds_val); + } + } } /* Try to find sdvo panel data */ @@ -256,6 +292,11 @@ parse_sdvo_panel_data(struct drm_i915_private *dev_priv, int index; index = i915_vbt_sdvo_panel_type; + if (index == -2) { + DRM_DEBUG_KMS("Ignore SDVO panel mode from BIOS VBT tables.\n"); + return; + } + if (index == -1) { struct bdb_sdvo_lvds_options *sdvo_lvds_options; @@ -332,11 +373,11 @@ parse_general_definitions(struct drm_i915_private *dev_priv, if (block_size >= sizeof(*general)) { int bus_pin = general->crt_ddc_gmbus_pin; DRM_DEBUG_KMS("crt_ddc_bus_pin: %d\n", bus_pin); - if (bus_pin >= 1 && bus_pin <= 6) + if (intel_gmbus_is_port_valid(bus_pin)) dev_priv->crt_ddc_pin = bus_pin; } else { DRM_DEBUG_KMS("BDB_GD too small (%d). Invalid.\n", - block_size); + block_size); } } } diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 4d3d736a4f56..70b0f1abf149 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -278,9 +278,10 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector) if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) { struct edid *edid; bool is_digital = false; + struct i2c_adapter *i2c; - edid = drm_get_edid(connector, - &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter); + i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin); + edid = drm_get_edid(connector, i2c); /* * This may be a DVI-I connector with a shared DDC * link between analog and digital outputs, so we @@ -483,15 +484,16 @@ static int intel_crt_get_modes(struct drm_connector *connector) struct drm_device *dev = connector->dev; struct drm_i915_private *dev_priv = dev->dev_private; int ret; + struct i2c_adapter *i2c; - ret = intel_ddc_get_modes(connector, - &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter); + i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin); + ret = intel_ddc_get_modes(connector, i2c); if (ret || !IS_G4X(dev)) return ret; /* Try to probe digital port for output in DVI-I -> VGA mode. */ - return intel_ddc_get_modes(connector, - &dev_priv->gmbus[GMBUS_PORT_DPB].adapter); + i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB); + return intel_ddc_get_modes(connector, i2c); } static int intel_crt_set_property(struct drm_connector *connector, @@ -543,7 +545,7 @@ static const struct drm_encoder_funcs intel_crt_enc_funcs = { static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id) { - DRM_DEBUG_KMS("Skipping CRT initialization for %s\n", id->ident); + DRM_INFO("Skipping CRT initialization for %s\n", id->ident); return 1; } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 91b35fd1db8c..37514a52b05c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -24,6 +24,7 @@ * Eric Anholt <eric@anholt.net> */ +#include <linux/dmi.h> #include <linux/cpufreq.h> #include <linux/module.h> #include <linux/input.h> @@ -360,6 +361,110 @@ static const intel_limit_t intel_limits_ironlake_display_port = { .find_pll = intel_find_pll_ironlake_dp, }; +u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg) +{ + unsigned long flags; + u32 val = 0; + + spin_lock_irqsave(&dev_priv->dpio_lock, flags); + if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) { + DRM_ERROR("DPIO idle wait timed out\n"); + goto out_unlock; + } + + I915_WRITE(DPIO_REG, reg); + I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_READ | DPIO_PORTID | + DPIO_BYTE); + if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) { + DRM_ERROR("DPIO read wait timed out\n"); + goto out_unlock; + } + val = I915_READ(DPIO_DATA); + +out_unlock: + spin_unlock_irqrestore(&dev_priv->dpio_lock, flags); + return val; +} + +static void intel_dpio_write(struct drm_i915_private *dev_priv, int reg, + u32 val) +{ + unsigned long flags; + + spin_lock_irqsave(&dev_priv->dpio_lock, flags); + if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) { + DRM_ERROR("DPIO idle wait timed out\n"); + goto out_unlock; + } + + I915_WRITE(DPIO_DATA, val); + I915_WRITE(DPIO_REG, reg); + I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_WRITE | DPIO_PORTID | + DPIO_BYTE); + if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) + DRM_ERROR("DPIO write wait timed out\n"); + +out_unlock: + spin_unlock_irqrestore(&dev_priv->dpio_lock, flags); +} + +static void vlv_init_dpio(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + /* Reset the DPIO config */ + I915_WRITE(DPIO_CTL, 0); + POSTING_READ(DPIO_CTL); + I915_WRITE(DPIO_CTL, 1); + POSTING_READ(DPIO_CTL); +} + +static int intel_dual_link_lvds_callback(const struct dmi_system_id *id) +{ + DRM_INFO("Forcing lvds to dual link mode on %s\n", id->ident); + return 1; +} + +static const struct dmi_system_id intel_dual_link_lvds[] = { + { + .callback = intel_dual_link_lvds_callback, + .ident = "Apple MacBook Pro (Core i5/i7 Series)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"), + }, + }, + { } /* terminating entry */ +}; + +static bool is_dual_link_lvds(struct drm_i915_private *dev_priv, + unsigned int reg) +{ + unsigned int val; + + /* use the module option value if specified */ + if (i915_lvds_channel_mode > 0) + return i915_lvds_channel_mode == 2; + + if (dmi_check_system(intel_dual_link_lvds)) + return true; + + if (dev_priv->lvds_val) + val = dev_priv->lvds_val; + else { + /* BIOS should set the proper LVDS register value at boot, but + * in reality, it doesn't set the value when the lid is closed; + * we need to check "the value to be set" in VBT when LVDS + * register is uninitialized. + */ + val = I915_READ(reg); + if (!(val & ~LVDS_DETECTED)) + val = dev_priv->bios_lvds_val; + dev_priv->lvds_val = val; + } + return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP; +} + static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc, int refclk) { @@ -368,8 +473,7 @@ static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc, const intel_limit_t *limit; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { - if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == - LVDS_CLKB_POWER_UP) { + if (is_dual_link_lvds(dev_priv, PCH_LVDS)) { /* LVDS dual channel */ if (refclk == 100000) limit = &intel_limits_ironlake_dual_lvds_100m; @@ -397,8 +501,7 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc) const intel_limit_t *limit; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { - if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == - LVDS_CLKB_POWER_UP) + if (is_dual_link_lvds(dev_priv, LVDS)) /* LVDS with dual channel */ limit = &intel_limits_g4x_dual_channel_lvds; else @@ -536,8 +639,7 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, * reliably set up different single/dual channel state, if we * even can. */ - if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == - LVDS_CLKB_POWER_UP) + if (is_dual_link_lvds(dev_priv, LVDS)) clock.p2 = limit->p2.p2_fast; else clock.p2 = limit->p2.p2_slow; @@ -2537,7 +2639,7 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - u32 reg, temp, i; + u32 reg, temp, i, retry; /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit for train result */ @@ -2589,15 +2691,19 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) POSTING_READ(reg); udelay(500); - reg = FDI_RX_IIR(pipe); - temp = I915_READ(reg); - DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); - - if (temp & FDI_RX_BIT_LOCK) { - I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); - DRM_DEBUG_KMS("FDI train 1 done.\n"); - break; + for (retry = 0; retry < 5; retry++) { + reg = FDI_RX_IIR(pipe); + temp = I915_READ(reg); + DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); + if (temp & FDI_RX_BIT_LOCK) { + I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); + DRM_DEBUG_KMS("FDI train 1 done.\n"); + break; + } + udelay(50); } + if (retry < 5) + break; } if (i == 4) DRM_ERROR("FDI train 1 fail!\n"); @@ -2638,15 +2744,19 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) POSTING_READ(reg); udelay(500); - reg = FDI_RX_IIR(pipe); - temp = I915_READ(reg); - DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); - - if (temp & FDI_RX_SYMBOL_LOCK) { - I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); - DRM_DEBUG_KMS("FDI train 2 done.\n"); - break; + for (retry = 0; retry < 5; retry++) { + reg = FDI_RX_IIR(pipe); + temp = I915_READ(reg); + DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); + if (temp & FDI_RX_SYMBOL_LOCK) { + I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); + DRM_DEBUG_KMS("FDI train 2 done.\n"); + break; + } + udelay(50); } + if (retry < 5) + break; } if (i == 4) DRM_ERROR("FDI train 2 fail!\n"); @@ -3457,6 +3567,11 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, return true; } +static int valleyview_get_display_clock_speed(struct drm_device *dev) +{ + return 400000; /* FIXME */ +} + static int i945_get_display_clock_speed(struct drm_device *dev) { return 400000; @@ -3606,6 +3721,20 @@ static const struct intel_watermark_params g4x_cursor_wm_info = { 2, G4X_FIFO_LINE_SIZE, }; +static const struct intel_watermark_params valleyview_wm_info = { + VALLEYVIEW_FIFO_SIZE, + VALLEYVIEW_MAX_WM, + VALLEYVIEW_MAX_WM, + 2, + G4X_FIFO_LINE_SIZE, +}; +static const struct intel_watermark_params valleyview_cursor_wm_info = { + I965_CURSOR_FIFO, + VALLEYVIEW_CURSOR_MAX_WM, + I965_CURSOR_DFT_WM, + 2, + G4X_FIFO_LINE_SIZE, +}; static const struct intel_watermark_params i965_cursor_wm_info = { I965_CURSOR_FIFO, I965_CURSOR_MAX_WM, @@ -4128,8 +4257,134 @@ static bool g4x_compute_srwm(struct drm_device *dev, display, cursor); } +static bool vlv_compute_drain_latency(struct drm_device *dev, + int plane, + int *plane_prec_mult, + int *plane_dl, + int *cursor_prec_mult, + int *cursor_dl) +{ + struct drm_crtc *crtc; + int clock, pixel_size; + int entries; + + crtc = intel_get_crtc_for_plane(dev, plane); + if (crtc->fb == NULL || !crtc->enabled) + return false; + + clock = crtc->mode.clock; /* VESA DOT Clock */ + pixel_size = crtc->fb->bits_per_pixel / 8; /* BPP */ + + entries = (clock / 1000) * pixel_size; + *plane_prec_mult = (entries > 256) ? + DRAIN_LATENCY_PRECISION_32 : DRAIN_LATENCY_PRECISION_16; + *plane_dl = (64 * (*plane_prec_mult) * 4) / ((clock / 1000) * + pixel_size); + + entries = (clock / 1000) * 4; /* BPP is always 4 for cursor */ + *cursor_prec_mult = (entries > 256) ? + DRAIN_LATENCY_PRECISION_32 : DRAIN_LATENCY_PRECISION_16; + *cursor_dl = (64 * (*cursor_prec_mult) * 4) / ((clock / 1000) * 4); + + return true; +} + +/* + * Update drain latency registers of memory arbiter + * + * Valleyview SoC has a new memory arbiter and needs drain latency registers + * to be programmed. Each plane has a drain latency multiplier and a drain + * latency value. + */ + +static void vlv_update_drain_latency(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int planea_prec, planea_dl, planeb_prec, planeb_dl; + int cursora_prec, cursora_dl, cursorb_prec, cursorb_dl; + int plane_prec_mult, cursor_prec_mult; /* Precision multiplier is + either 16 or 32 */ + + /* For plane A, Cursor A */ + if (vlv_compute_drain_latency(dev, 0, &plane_prec_mult, &planea_dl, + &cursor_prec_mult, &cursora_dl)) { + cursora_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_32) ? + DDL_CURSORA_PRECISION_32 : DDL_CURSORA_PRECISION_16; + planea_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_32) ? + DDL_PLANEA_PRECISION_32 : DDL_PLANEA_PRECISION_16; + + I915_WRITE(VLV_DDL1, cursora_prec | + (cursora_dl << DDL_CURSORA_SHIFT) | + planea_prec | planea_dl); + } + + /* For plane B, Cursor B */ + if (vlv_compute_drain_latency(dev, 1, &plane_prec_mult, &planeb_dl, + &cursor_prec_mult, &cursorb_dl)) { + cursorb_prec = (cursor_prec_mult == DRAIN_LATENCY_PRECISION_32) ? + DDL_CURSORB_PRECISION_32 : DDL_CURSORB_PRECISION_16; + planeb_prec = (plane_prec_mult == DRAIN_LATENCY_PRECISION_32) ? + DDL_PLANEB_PRECISION_32 : DDL_PLANEB_PRECISION_16; + + I915_WRITE(VLV_DDL2, cursorb_prec | + (cursorb_dl << DDL_CURSORB_SHIFT) | + planeb_prec | planeb_dl); + } +} + #define single_plane_enabled(mask) is_power_of_2(mask) +static void valleyview_update_wm(struct drm_device *dev) +{ + static const int sr_latency_ns = 12000; + struct drm_i915_private *dev_priv = dev->dev_private; + int planea_wm, planeb_wm, cursora_wm, cursorb_wm; + int plane_sr, cursor_sr; + unsigned int enabled = 0; + + vlv_update_drain_latency(dev); + + if (g4x_compute_wm0(dev, 0, + &valleyview_wm_info, latency_ns, + &valleyview_cursor_wm_info, latency_ns, + &planea_wm, &cursora_wm)) + enabled |= 1; + + if (g4x_compute_wm0(dev, 1, + &valleyview_wm_info, latency_ns, + &valleyview_cursor_wm_info, latency_ns, + &planeb_wm, &cursorb_wm)) + enabled |= 2; + + plane_sr = cursor_sr = 0; + if (single_plane_enabled(enabled) && + g4x_compute_srwm(dev, ffs(enabled) - 1, + sr_latency_ns, + &valleyview_wm_info, + &valleyview_cursor_wm_info, + &plane_sr, &cursor_sr)) + I915_WRITE(FW_BLC_SELF_VLV, FW_CSPWRDWNEN); + else + I915_WRITE(FW_BLC_SELF_VLV, + I915_READ(FW_BLC_SELF_VLV) & ~FW_CSPWRDWNEN); + + DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n", + planea_wm, cursora_wm, + planeb_wm, cursorb_wm, + plane_sr, cursor_sr); + + I915_WRITE(DSPFW1, + (plane_sr << DSPFW_SR_SHIFT) | + (cursorb_wm << DSPFW_CURSORB_SHIFT) | + (planeb_wm << DSPFW_PLANEB_SHIFT) | + planea_wm); + I915_WRITE(DSPFW2, + (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) | + (cursora_wm << DSPFW_CURSORA_SHIFT)); + I915_WRITE(DSPFW3, + (I915_READ(DSPFW3) | (cursor_sr << DSPFW_CURSOR_SR_SHIFT))); +} + static void g4x_update_wm(struct drm_device *dev) { static const int sr_latency_ns = 12000; @@ -5113,6 +5368,233 @@ static void i9xx_update_pll_dividers(struct drm_crtc *crtc, } } +static void intel_update_lvds(struct drm_crtc *crtc, intel_clock_t *clock, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + u32 temp, lvds_sync = 0; + + temp = I915_READ(LVDS); + temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; + if (pipe == 1) { + temp |= LVDS_PIPEB_SELECT; + } else { + temp &= ~LVDS_PIPEB_SELECT; + } + /* set the corresponsding LVDS_BORDER bit */ + temp |= dev_priv->lvds_border_bits; + /* Set the B0-B3 data pairs corresponding to whether we're going to + * set the DPLLs for dual-channel mode or not. + */ + if (clock->p2 == 7) + temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; + else + temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); + + /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) + * appropriately here, but we need to look more thoroughly into how + * panels behave in the two modes. + */ + /* set the dithering flag on LVDS as needed */ + if (INTEL_INFO(dev)->gen >= 4) { + if (dev_priv->lvds_dither) + temp |= LVDS_ENABLE_DITHER; + else + temp &= ~LVDS_ENABLE_DITHER; + } + if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) + lvds_sync |= LVDS_HSYNC_POLARITY; + if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) + lvds_sync |= LVDS_VSYNC_POLARITY; + if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY)) + != lvds_sync) { + char flags[2] = "-+"; + DRM_INFO("Changing LVDS panel from " + "(%chsync, %cvsync) to (%chsync, %cvsync)\n", + flags[!(temp & LVDS_HSYNC_POLARITY)], + flags[!(temp & LVDS_VSYNC_POLARITY)], + flags[!(lvds_sync & LVDS_HSYNC_POLARITY)], + flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]); + temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); + temp |= lvds_sync; + } + I915_WRITE(LVDS, temp); +} + +static void i9xx_update_pll(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + intel_clock_t *clock, intel_clock_t *reduced_clock, + int num_connectors) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + u32 dpll; + bool is_sdvo; + + is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) || + intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI); + + dpll = DPLL_VGA_MODE_DIS; + + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) + dpll |= DPLLB_MODE_LVDS; + else + dpll |= DPLLB_MODE_DAC_SERIAL; + if (is_sdvo) { + int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); + if (pixel_multiplier > 1) { + if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) + dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; + } + dpll |= DPLL_DVO_HIGH_SPEED; + } + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) + dpll |= DPLL_DVO_HIGH_SPEED; + + /* compute bitmask from p1 value */ + if (IS_PINEVIEW(dev)) + dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW; + else { + dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; + if (IS_G4X(dev) && reduced_clock) + dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; + } + switch (clock->p2) { + case 5: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; + break; + case 7: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; + break; + case 10: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; + break; + case 14: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; + break; + } + if (INTEL_INFO(dev)->gen >= 4) + dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); + + if (is_sdvo && intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT)) + dpll |= PLL_REF_INPUT_TVCLKINBC; + else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT)) + /* XXX: just matching BIOS for now */ + /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ + dpll |= 3; + else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && + intel_panel_use_ssc(dev_priv) && num_connectors < 2) + dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; + else + dpll |= PLL_REF_INPUT_DREFCLK; + + dpll |= DPLL_VCO_ENABLE; + I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE); + POSTING_READ(DPLL(pipe)); + udelay(150); + + /* The LVDS pin pair needs to be on before the DPLLs are enabled. + * This is an exception to the general rule that mode_set doesn't turn + * things on. + */ + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) + intel_update_lvds(crtc, clock, adjusted_mode); + + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) + intel_dp_set_m_n(crtc, mode, adjusted_mode); + + I915_WRITE(DPLL(pipe), dpll); + + /* Wait for the clocks to stabilize. */ + POSTING_READ(DPLL(pipe)); + udelay(150); + + if (INTEL_INFO(dev)->gen >= 4) { + u32 temp = 0; + if (is_sdvo) { + temp = intel_mode_get_pixel_multiplier(adjusted_mode); + if (temp > 1) + temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; + else + temp = 0; + } + I915_WRITE(DPLL_MD(pipe), temp); + } else { + /* The pixel multiplier can only be updated once the + * DPLL is enabled and the clocks are stable. + * + * So write it again. + */ + I915_WRITE(DPLL(pipe), dpll); + } +} + +static void i8xx_update_pll(struct drm_crtc *crtc, + struct drm_display_mode *adjusted_mode, + intel_clock_t *clock, + int num_connectors) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + u32 dpll; + + dpll = DPLL_VGA_MODE_DIS; + + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { + dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; + } else { + if (clock->p1 == 2) + dpll |= PLL_P1_DIVIDE_BY_TWO; + else + dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT; + if (clock->p2 == 4) + dpll |= PLL_P2_DIVIDE_BY_4; + } + + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT)) + /* XXX: just matching BIOS for now */ + /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ + dpll |= 3; + else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && + intel_panel_use_ssc(dev_priv) && num_connectors < 2) + dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; + else + dpll |= PLL_REF_INPUT_DREFCLK; + + dpll |= DPLL_VCO_ENABLE; + I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE); + POSTING_READ(DPLL(pipe)); + udelay(150); + + I915_WRITE(DPLL(pipe), dpll); + + /* Wait for the clocks to stabilize. */ + POSTING_READ(DPLL(pipe)); + udelay(150); + + /* The LVDS pin pair needs to be on before the DPLLs are enabled. + * This is an exception to the general rule that mode_set doesn't turn + * things on. + */ + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) + intel_update_lvds(crtc, clock, adjusted_mode); + + /* The pixel multiplier can only be updated once the + * DPLL is enabled and the clocks are stable. + * + * So write it again. + */ + I915_WRITE(DPLL(pipe), dpll); +} + static int i9xx_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, @@ -5126,15 +5608,13 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, int plane = intel_crtc->plane; int refclk, num_connectors = 0; intel_clock_t clock, reduced_clock; - u32 dpll, dspcntr, pipeconf, vsyncshift; - bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false; - bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; + u32 dspcntr, pipeconf, vsyncshift; + bool ok, has_reduced_clock = false, is_sdvo = false; + bool is_lvds = false, is_tv = false, is_dp = false; struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *encoder; const intel_limit_t *limit; int ret; - u32 temp; - u32 lvds_sync = 0; list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { if (encoder->base.crtc != crtc) @@ -5150,15 +5630,9 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, if (encoder->needs_tv_clock) is_tv = true; break; - case INTEL_OUTPUT_DVO: - is_dvo = true; - break; case INTEL_OUTPUT_TVOUT: is_tv = true; break; - case INTEL_OUTPUT_ANALOG: - is_crt = true; - break; case INTEL_OUTPUT_DISPLAYPORT: is_dp = true; break; @@ -5205,71 +5679,12 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, i9xx_update_pll_dividers(crtc, &clock, has_reduced_clock ? &reduced_clock : NULL); - dpll = DPLL_VGA_MODE_DIS; - - if (!IS_GEN2(dev)) { - if (is_lvds) - dpll |= DPLLB_MODE_LVDS; - else - dpll |= DPLLB_MODE_DAC_SERIAL; - if (is_sdvo) { - int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); - if (pixel_multiplier > 1) { - if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) - dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; - } - dpll |= DPLL_DVO_HIGH_SPEED; - } - if (is_dp) - dpll |= DPLL_DVO_HIGH_SPEED; - - /* compute bitmask from p1 value */ - if (IS_PINEVIEW(dev)) - dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW; - else { - dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; - if (IS_G4X(dev) && has_reduced_clock) - dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; - } - switch (clock.p2) { - case 5: - dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; - break; - case 7: - dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; - break; - case 10: - dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; - break; - case 14: - dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; - break; - } - if (INTEL_INFO(dev)->gen >= 4) - dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); - } else { - if (is_lvds) { - dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; - } else { - if (clock.p1 == 2) - dpll |= PLL_P1_DIVIDE_BY_TWO; - else - dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT; - if (clock.p2 == 4) - dpll |= PLL_P2_DIVIDE_BY_4; - } - } - - if (is_sdvo && is_tv) - dpll |= PLL_REF_INPUT_TVCLKINBC; - else if (is_tv) - /* XXX: just matching BIOS for now */ - /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ - dpll |= 3; - else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) - dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; + if (IS_GEN2(dev)) + i8xx_update_pll(crtc, adjusted_mode, &clock, num_connectors); else - dpll |= PLL_REF_INPUT_DREFCLK; + i9xx_update_pll(crtc, mode, adjusted_mode, &clock, + has_reduced_clock ? &reduced_clock : NULL, + num_connectors); /* setup pipeconf */ pipeconf = I915_READ(PIPECONF(pipe)); @@ -5306,97 +5721,9 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, } } - dpll |= DPLL_VCO_ENABLE; - DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); drm_mode_debug_printmodeline(mode); - I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE); - - POSTING_READ(DPLL(pipe)); - udelay(150); - - /* The LVDS pin pair needs to be on before the DPLLs are enabled. - * This is an exception to the general rule that mode_set doesn't turn - * things on. - */ - if (is_lvds) { - temp = I915_READ(LVDS); - temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; - if (pipe == 1) { - temp |= LVDS_PIPEB_SELECT; - } else { - temp &= ~LVDS_PIPEB_SELECT; - } - /* set the corresponsding LVDS_BORDER bit */ - temp |= dev_priv->lvds_border_bits; - /* Set the B0-B3 data pairs corresponding to whether we're going to - * set the DPLLs for dual-channel mode or not. - */ - if (clock.p2 == 7) - temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; - else - temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); - - /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) - * appropriately here, but we need to look more thoroughly into how - * panels behave in the two modes. - */ - /* set the dithering flag on LVDS as needed */ - if (INTEL_INFO(dev)->gen >= 4) { - if (dev_priv->lvds_dither) - temp |= LVDS_ENABLE_DITHER; - else - temp &= ~LVDS_ENABLE_DITHER; - } - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) - lvds_sync |= LVDS_HSYNC_POLARITY; - if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) - lvds_sync |= LVDS_VSYNC_POLARITY; - if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY)) - != lvds_sync) { - char flags[2] = "-+"; - DRM_INFO("Changing LVDS panel from " - "(%chsync, %cvsync) to (%chsync, %cvsync)\n", - flags[!(temp & LVDS_HSYNC_POLARITY)], - flags[!(temp & LVDS_VSYNC_POLARITY)], - flags[!(lvds_sync & LVDS_HSYNC_POLARITY)], - flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]); - temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); - temp |= lvds_sync; - } - I915_WRITE(LVDS, temp); - } - - if (is_dp) { - intel_dp_set_m_n(crtc, mode, adjusted_mode); - } - - I915_WRITE(DPLL(pipe), dpll); - - /* Wait for the clocks to stabilize. */ - POSTING_READ(DPLL(pipe)); - udelay(150); - - if (INTEL_INFO(dev)->gen >= 4) { - temp = 0; - if (is_sdvo) { - temp = intel_mode_get_pixel_multiplier(adjusted_mode); - if (temp > 1) - temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; - else - temp = 0; - } - I915_WRITE(DPLL_MD(pipe), temp); - } else { - /* The pixel multiplier can only be updated once the - * DPLL is enabled and the clocks are stable. - * - * So write it again. - */ - I915_WRITE(DPLL(pipe), dpll); - } - if (HAS_PIPE_CXSR(dev)) { if (intel_crtc->lowfreq_avail) { DRM_DEBUG_KMS("enabling CxSR downclocking\n"); @@ -7796,7 +8123,7 @@ static void intel_setup_outputs(struct drm_device *dev) if (I915_READ(HDMIB) & PORT_DETECTED) { /* PCH SDVOB multiplex with HDMIB */ - found = intel_sdvo_init(dev, PCH_SDVOB); + found = intel_sdvo_init(dev, PCH_SDVOB, true); if (!found) intel_hdmi_init(dev, HDMIB); if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED)) @@ -7820,7 +8147,7 @@ static void intel_setup_outputs(struct drm_device *dev) if (I915_READ(SDVOB) & SDVO_DETECTED) { DRM_DEBUG_KMS("probing SDVOB\n"); - found = intel_sdvo_init(dev, SDVOB); + found = intel_sdvo_init(dev, SDVOB, true); if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) { DRM_DEBUG_KMS("probing HDMI on SDVOB\n"); intel_hdmi_init(dev, SDVOB); @@ -7836,7 +8163,7 @@ static void intel_setup_outputs(struct drm_device *dev) if (I915_READ(SDVOB) & SDVO_DETECTED) { DRM_DEBUG_KMS("probing SDVOC\n"); - found = intel_sdvo_init(dev, SDVOC); + found = intel_sdvo_init(dev, SDVOC, false); } if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) { @@ -8617,6 +8944,54 @@ static void ivybridge_init_clock_gating(struct drm_device *dev) } } +static void valleyview_init_clock_gating(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int pipe; + uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE; + + I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate); + + I915_WRITE(WM3_LP_ILK, 0); + I915_WRITE(WM2_LP_ILK, 0); + I915_WRITE(WM1_LP_ILK, 0); + + /* According to the spec, bit 13 (RCZUNIT) must be set on IVB. + * This implements the WaDisableRCZUnitClockGating workaround. + */ + I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE); + + I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE); + + I915_WRITE(IVB_CHICKEN3, + CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE | + CHICKEN3_DGMG_DONE_FIX_DISABLE); + + /* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */ + I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1, + GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC); + + /* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */ + I915_WRITE(GEN7_L3CNTLREG1, GEN7_WA_FOR_GEN7_L3_CONTROL); + I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER, GEN7_WA_L3_CHICKEN_MODE); + + /* This is required by WaCatErrorRejectionIssue */ + I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG, + I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) | + GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB); + + for_each_pipe(pipe) { + I915_WRITE(DSPCNTR(pipe), + I915_READ(DSPCNTR(pipe)) | + DISPPLANE_TRICKLE_FEED_DISABLE); + intel_flush_display_plane(dev_priv, pipe); + } + + I915_WRITE(CACHE_MODE_1, I915_READ(CACHE_MODE_1) | + (PIXEL_SUBSPAN_COLLECT_OPT_DISABLE << 16) | + PIXEL_SUBSPAN_COLLECT_OPT_DISABLE); +} + static void g4x_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -8871,7 +9246,10 @@ static void intel_init_display(struct drm_device *dev) } /* Returns the core display clock speed */ - if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev))) + if (IS_VALLEYVIEW(dev)) + dev_priv->display.get_display_clock_speed = + valleyview_get_display_clock_speed; + else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev))) dev_priv->display.get_display_clock_speed = i945_get_display_clock_speed; else if (IS_I915G(dev)) @@ -8966,6 +9344,12 @@ static void intel_init_display(struct drm_device *dev) dev_priv->display.write_eld = ironlake_write_eld; } else dev_priv->display.update_wm = NULL; + } else if (IS_VALLEYVIEW(dev)) { + dev_priv->display.update_wm = valleyview_update_wm; + dev_priv->display.init_clock_gating = + valleyview_init_clock_gating; + dev_priv->display.force_wake_get = vlv_force_wake_get; + dev_priv->display.force_wake_put = vlv_force_wake_put; } else if (IS_PINEVIEW(dev)) { if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3, @@ -9049,7 +9433,7 @@ static void quirk_pipea_force(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; dev_priv->quirks |= QUIRK_PIPEA_FORCE; - DRM_DEBUG_DRIVER("applying pipe a force quirk\n"); + DRM_INFO("applying pipe a force quirk\n"); } /* @@ -9059,6 +9443,18 @@ static void quirk_ssc_force_disable(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE; + DRM_INFO("applying lvds SSC disable quirk\n"); +} + +/* + * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight + * brightness value + */ +static void quirk_invert_brightness(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS; + DRM_INFO("applying inverted panel brightness quirk\n"); } struct intel_quirk { @@ -9093,6 +9489,9 @@ struct intel_quirk intel_quirks[] = { /* Sony Vaio Y cannot use SSC on LVDS */ { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable }, + + /* Acer Aspire 5734Z must invert backlight brightness */ + { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness }, }; static void intel_init_quirks(struct drm_device *dev) @@ -9236,6 +9635,9 @@ void intel_modeset_cleanup(struct drm_device *dev) if (IS_IRONLAKE_M(dev)) ironlake_disable_rc6(dev); + if (IS_VALLEYVIEW(dev)) + vlv_init_dpio(dev); + mutex_unlock(&dev->struct_mutex); /* Disable the irq before mode object teardown, for the irq might diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 5a14149b3794..79cabf58d877 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -45,6 +45,18 @@ ret__; \ }) +#define wait_for_atomic_us(COND, US) ({ \ + int i, ret__ = -ETIMEDOUT; \ + for (i = 0; i < (US); i++) { \ + if ((COND)) { \ + ret__ = 0; \ + break; \ + } \ + udelay(1); \ + } \ + ret__; \ +}) + #define wait_for(COND, MS) _wait_for(COND, MS, 1) #define wait_for_atomic(COND, MS) _wait_for(COND, MS, 0) @@ -293,7 +305,8 @@ extern void intel_attach_broadcast_rgb_property(struct drm_connector *connector) extern void intel_crt_init(struct drm_device *dev); extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg); void intel_dip_infoframe_csum(struct dip_infoframe *avi_if); -extern bool intel_sdvo_init(struct drm_device *dev, int output_device); +extern bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, + bool is_sdvob); extern void intel_dvo_init(struct drm_device *dev); extern void intel_tv_init(struct drm_device *dev); extern void intel_mark_busy(struct drm_device *dev, @@ -419,4 +432,6 @@ extern int intel_sprite_set_colorkey(struct drm_device *dev, void *data, extern int intel_sprite_get_colorkey(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg); + #endif /* __INTEL_DRV_H__ */ diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c index 020a7d7f744d..60ba50b956f2 100644 --- a/drivers/gpu/drm/i915/intel_dvo.c +++ b/drivers/gpu/drm/i915/intel_dvo.c @@ -243,7 +243,7 @@ static int intel_dvo_get_modes(struct drm_connector *connector) * that's not the case. */ intel_ddc_get_modes(connector, - &dev_priv->gmbus[GMBUS_PORT_DPC].adapter); + intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPC)); if (!list_empty(&connector->probed_modes)) return 1; @@ -375,7 +375,7 @@ void intel_dvo_init(struct drm_device *dev) * special cases, but otherwise default to what's defined * in the spec. */ - if (dvo->gpio != 0) + if (intel_gmbus_is_port_valid(dvo->gpio)) gpio = dvo->gpio; else if (dvo->type == INTEL_DVO_CHIP_LVDS) gpio = GMBUS_PORT_SSC; @@ -386,7 +386,7 @@ void intel_dvo_init(struct drm_device *dev) * It appears that everything is on GPIOE except for panels * on i830 laptops, which are on GPIOB (DVOA). */ - i2c = &dev_priv->gmbus[gpio].adapter; + i2c = intel_gmbus_get_adapter(dev_priv, gpio); intel_dvo->dev = *dvo; if (!dvo->dev_ops->init(&intel_dvo->dev, i2c)) diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index cae3e5f17a49..7de2d3b85b32 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -177,6 +177,37 @@ static void ironlake_write_infoframe(struct drm_encoder *encoder, I915_WRITE(reg, VIDEO_DIP_ENABLE | val | flags); } + +static void vlv_write_infoframe(struct drm_encoder *encoder, + struct dip_infoframe *frame) +{ + uint32_t *data = (uint32_t *)frame; + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc = encoder->crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe); + unsigned i, len = DIP_HEADER_SIZE + frame->len; + u32 flags, val = I915_READ(reg); + + intel_wait_for_vblank(dev, intel_crtc->pipe); + + flags = intel_infoframe_index(frame); + + val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */ + + I915_WRITE(reg, VIDEO_DIP_ENABLE | val | flags); + + for (i = 0; i < len; i += 4) { + I915_WRITE(VLV_TVIDEO_DIP_DATA(intel_crtc->pipe), *data); + data++; + } + + flags |= intel_infoframe_flags(frame); + + I915_WRITE(reg, VIDEO_DIP_ENABLE | val | flags); +} + static void intel_set_infoframe(struct drm_encoder *encoder, struct dip_infoframe *frame) { @@ -334,7 +365,8 @@ intel_hdmi_detect(struct drm_connector *connector, bool force) intel_hdmi->has_hdmi_sink = false; intel_hdmi->has_audio = false; edid = drm_get_edid(connector, - &dev_priv->gmbus[intel_hdmi->ddc_bus].adapter); + intel_gmbus_get_adapter(dev_priv, + intel_hdmi->ddc_bus)); if (edid) { if (edid->input & DRM_EDID_INPUT_DIGITAL) { @@ -367,7 +399,8 @@ static int intel_hdmi_get_modes(struct drm_connector *connector) */ return intel_ddc_get_modes(connector, - &dev_priv->gmbus[intel_hdmi->ddc_bus].adapter); + intel_gmbus_get_adapter(dev_priv, + intel_hdmi->ddc_bus)); } static bool @@ -379,7 +412,8 @@ intel_hdmi_detect_audio(struct drm_connector *connector) bool has_audio = false; edid = drm_get_edid(connector, - &dev_priv->gmbus[intel_hdmi->ddc_bus].adapter); + intel_gmbus_get_adapter(dev_priv, + intel_hdmi->ddc_bus)); if (edid) { if (edid->input & DRM_EDID_INPUT_DIGITAL) has_audio = drm_detect_monitor_audio(edid); @@ -549,7 +583,11 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg) if (!HAS_PCH_SPLIT(dev)) { intel_hdmi->write_infoframe = i9xx_write_infoframe; I915_WRITE(VIDEO_DIP_CTL, 0); - } else { + } else if (IS_VALLEYVIEW(dev)) { + intel_hdmi->write_infoframe = vlv_write_infoframe; + for_each_pipe(i) + I915_WRITE(VLV_TVIDEO_DIP_CTL(i), 0); + } else { intel_hdmi->write_infoframe = ironlake_write_infoframe; for_each_pipe(i) I915_WRITE(TVIDEO_DIP_CTL(i), 0); diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 601c86e664af..c12db7265893 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -35,6 +35,20 @@ #include "i915_drm.h" #include "i915_drv.h" +struct gmbus_port { + const char *name; + int reg; +}; + +static const struct gmbus_port gmbus_ports[] = { + { "ssc", GPIOB }, + { "vga", GPIOA }, + { "panel", GPIOC }, + { "dpc", GPIOD }, + { "dpb", GPIOE }, + { "dpd", GPIOF }, +}; + /* Intel GPIO access functions */ #define I2C_RISEFALL_TIME 10 @@ -49,10 +63,7 @@ void intel_i2c_reset(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - if (HAS_PCH_SPLIT(dev)) - I915_WRITE(PCH_GMBUS0, 0); - else - I915_WRITE(GMBUS0, 0); + I915_WRITE(dev_priv->gpio_mmio_base + GMBUS0, 0); } static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable) @@ -140,65 +151,132 @@ static void set_data(void *data, int state_high) POSTING_READ(bus->gpio_reg); } -static bool +static int +intel_gpio_pre_xfer(struct i2c_adapter *adapter) +{ + struct intel_gmbus *bus = container_of(adapter, + struct intel_gmbus, + adapter); + struct drm_i915_private *dev_priv = bus->dev_priv; + + intel_i2c_reset(dev_priv->dev); + intel_i2c_quirk_set(dev_priv, true); + set_data(bus, 1); + set_clock(bus, 1); + udelay(I2C_RISEFALL_TIME); + return 0; +} + +static void +intel_gpio_post_xfer(struct i2c_adapter *adapter) +{ + struct intel_gmbus *bus = container_of(adapter, + struct intel_gmbus, + adapter); + struct drm_i915_private *dev_priv = bus->dev_priv; + + set_data(bus, 1); + set_clock(bus, 1); + intel_i2c_quirk_set(dev_priv, false); +} + +static void intel_gpio_setup(struct intel_gmbus *bus, u32 pin) { struct drm_i915_private *dev_priv = bus->dev_priv; - static const int map_pin_to_reg[] = { - 0, - GPIOB, - GPIOA, - GPIOC, - GPIOD, - GPIOE, - 0, - GPIOF, - }; struct i2c_algo_bit_data *algo; - if (pin >= ARRAY_SIZE(map_pin_to_reg) || !map_pin_to_reg[pin]) - return false; - algo = &bus->bit_algo; - bus->gpio_reg = map_pin_to_reg[pin]; - if (HAS_PCH_SPLIT(dev_priv->dev)) - bus->gpio_reg += PCH_GPIOA - GPIOA; + /* -1 to map pin pair to gmbus index */ + bus->gpio_reg = dev_priv->gpio_mmio_base + gmbus_ports[pin - 1].reg; bus->adapter.algo_data = algo; algo->setsda = set_data; algo->setscl = set_clock; algo->getsda = get_data; algo->getscl = get_clock; + algo->pre_xfer = intel_gpio_pre_xfer; + algo->post_xfer = intel_gpio_post_xfer; algo->udelay = I2C_RISEFALL_TIME; algo->timeout = usecs_to_jiffies(2200); algo->data = bus; - - return true; } static int -intel_i2c_quirk_xfer(struct intel_gmbus *bus, - struct i2c_msg *msgs, - int num) +gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg, + bool last) { - struct drm_i915_private *dev_priv = bus->dev_priv; - int ret; + int reg_offset = dev_priv->gpio_mmio_base; + u16 len = msg->len; + u8 *buf = msg->buf; + + I915_WRITE(GMBUS1 + reg_offset, + GMBUS_CYCLE_WAIT | + (last ? GMBUS_CYCLE_STOP : 0) | + (len << GMBUS_BYTE_COUNT_SHIFT) | + (msg->addr << GMBUS_SLAVE_ADDR_SHIFT) | + GMBUS_SLAVE_READ | GMBUS_SW_RDY); + POSTING_READ(GMBUS2 + reg_offset); + do { + u32 val, loop = 0; + + if (wait_for(I915_READ(GMBUS2 + reg_offset) & + (GMBUS_SATOER | GMBUS_HW_RDY), + 50)) + return -ETIMEDOUT; + if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER) + return -ENXIO; - intel_i2c_reset(dev_priv->dev); + val = I915_READ(GMBUS3 + reg_offset); + do { + *buf++ = val & 0xff; + val >>= 8; + } while (--len && ++loop < 4); + } while (len); - intel_i2c_quirk_set(dev_priv, true); - set_data(bus, 1); - set_clock(bus, 1); - udelay(I2C_RISEFALL_TIME); + return 0; +} - ret = i2c_bit_algo.master_xfer(&bus->adapter, msgs, num); +static int +gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg, + bool last) +{ + int reg_offset = dev_priv->gpio_mmio_base; + u16 len = msg->len; + u8 *buf = msg->buf; + u32 val, loop; + + val = loop = 0; + do { + val |= *buf++ << (8 * loop); + } while (--len && ++loop < 4); + + I915_WRITE(GMBUS3 + reg_offset, val); + I915_WRITE(GMBUS1 + reg_offset, + GMBUS_CYCLE_WAIT | + (last ? GMBUS_CYCLE_STOP : 0) | + (msg->len << GMBUS_BYTE_COUNT_SHIFT) | + (msg->addr << GMBUS_SLAVE_ADDR_SHIFT) | + GMBUS_SLAVE_WRITE | GMBUS_SW_RDY); + POSTING_READ(GMBUS2 + reg_offset); + while (len) { + if (wait_for(I915_READ(GMBUS2 + reg_offset) & + (GMBUS_SATOER | GMBUS_HW_RDY), + 50)) + return -ETIMEDOUT; + if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER) + return -ENXIO; - set_data(bus, 1); - set_clock(bus, 1); - intel_i2c_quirk_set(dev_priv, false); + val = loop = 0; + do { + val |= *buf++ << (8 * loop); + } while (--len && ++loop < 4); - return ret; + I915_WRITE(GMBUS3 + reg_offset, val); + POSTING_READ(GMBUS2 + reg_offset); + } + return 0; } static int @@ -215,74 +293,31 @@ gmbus_xfer(struct i2c_adapter *adapter, mutex_lock(&dev_priv->gmbus_mutex); if (bus->force_bit) { - ret = intel_i2c_quirk_xfer(bus, msgs, num); + ret = i2c_bit_algo.master_xfer(adapter, msgs, num); goto out; } - reg_offset = HAS_PCH_SPLIT(dev_priv->dev) ? PCH_GMBUS0 - GMBUS0 : 0; + reg_offset = dev_priv->gpio_mmio_base; I915_WRITE(GMBUS0 + reg_offset, bus->reg0); for (i = 0; i < num; i++) { - u16 len = msgs[i].len; - u8 *buf = msgs[i].buf; - - if (msgs[i].flags & I2C_M_RD) { - I915_WRITE(GMBUS1 + reg_offset, - GMBUS_CYCLE_WAIT | - (i + 1 == num ? GMBUS_CYCLE_STOP : 0) | - (len << GMBUS_BYTE_COUNT_SHIFT) | - (msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) | - GMBUS_SLAVE_READ | GMBUS_SW_RDY); - POSTING_READ(GMBUS2+reg_offset); - do { - u32 val, loop = 0; - - if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50)) - goto timeout; - if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER) - goto clear_err; - - val = I915_READ(GMBUS3 + reg_offset); - do { - *buf++ = val & 0xff; - val >>= 8; - } while (--len && ++loop < 4); - } while (len); - } else { - u32 val, loop; - - val = loop = 0; - do { - val |= *buf++ << (8 * loop); - } while (--len && ++loop < 4); - - I915_WRITE(GMBUS3 + reg_offset, val); - I915_WRITE(GMBUS1 + reg_offset, - GMBUS_CYCLE_WAIT | - (i + 1 == num ? GMBUS_CYCLE_STOP : 0) | - (msgs[i].len << GMBUS_BYTE_COUNT_SHIFT) | - (msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) | - GMBUS_SLAVE_WRITE | GMBUS_SW_RDY); - POSTING_READ(GMBUS2+reg_offset); - - while (len) { - if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50)) - goto timeout; - if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER) - goto clear_err; - - val = loop = 0; - do { - val |= *buf++ << (8 * loop); - } while (--len && ++loop < 4); - - I915_WRITE(GMBUS3 + reg_offset, val); - POSTING_READ(GMBUS2+reg_offset); - } - } - - if (i + 1 < num && wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), 50)) + bool last = i + 1 == num; + + if (msgs[i].flags & I2C_M_RD) + ret = gmbus_xfer_read(dev_priv, &msgs[i], last); + else + ret = gmbus_xfer_write(dev_priv, &msgs[i], last); + + if (ret == -ETIMEDOUT) + goto timeout; + if (ret == -ENXIO) + goto clear_err; + + if (!last && + wait_for(I915_READ(GMBUS2 + reg_offset) & + (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), + 50)) goto timeout; if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER) goto clear_err; @@ -304,23 +339,21 @@ done: * till then let it sleep. */ if (wait_for((I915_READ(GMBUS2 + reg_offset) & GMBUS_ACTIVE) == 0, 10)) - DRM_INFO("GMBUS timed out waiting for idle\n"); + DRM_INFO("GMBUS [%s] timed out waiting for idle\n", + bus->adapter.name); I915_WRITE(GMBUS0 + reg_offset, 0); ret = i; goto out; timeout: - DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d [%s]\n", - bus->reg0 & 0xff, bus->adapter.name); + DRM_INFO("GMBUS [%s] timed out, falling back to bit banging on pin %d\n", + bus->adapter.name, bus->reg0 & 0xff); I915_WRITE(GMBUS0 + reg_offset, 0); /* Hardware may not support GMBUS over these pins? Try GPIO bitbanging instead. */ - if (!bus->has_gpio) { - ret = -EIO; - } else { - bus->force_bit = true; - ret = intel_i2c_quirk_xfer(bus, msgs, num); - } + bus->force_bit = true; + ret = i2c_bit_algo.master_xfer(adapter, msgs, num); + out: mutex_unlock(&dev_priv->gmbus_mutex); return ret; @@ -346,35 +379,26 @@ static const struct i2c_algorithm gmbus_algorithm = { */ int intel_setup_gmbus(struct drm_device *dev) { - static const char *names[GMBUS_NUM_PORTS] = { - "disabled", - "ssc", - "vga", - "panel", - "dpc", - "dpb", - "reserved", - "dpd", - }; struct drm_i915_private *dev_priv = dev->dev_private; int ret, i; - dev_priv->gmbus = kcalloc(GMBUS_NUM_PORTS, sizeof(struct intel_gmbus), - GFP_KERNEL); - if (dev_priv->gmbus == NULL) - return -ENOMEM; + if (HAS_PCH_SPLIT(dev)) + dev_priv->gpio_mmio_base = PCH_GPIOA - GPIOA; + else + dev_priv->gpio_mmio_base = 0; mutex_init(&dev_priv->gmbus_mutex); for (i = 0; i < GMBUS_NUM_PORTS; i++) { struct intel_gmbus *bus = &dev_priv->gmbus[i]; + u32 port = i + 1; /* +1 to map gmbus index to pin pair */ bus->adapter.owner = THIS_MODULE; bus->adapter.class = I2C_CLASS_DDC; snprintf(bus->adapter.name, sizeof(bus->adapter.name), "i915 gmbus %s", - names[i]); + gmbus_ports[i].name); bus->adapter.dev.parent = &dev->pdev->dev; bus->dev_priv = dev_priv; @@ -385,13 +409,9 @@ int intel_setup_gmbus(struct drm_device *dev) goto err; /* By default use a conservative clock rate */ - bus->reg0 = i | GMBUS_RATE_100KHZ; - - bus->has_gpio = intel_gpio_setup(bus, i); + bus->reg0 = port | GMBUS_RATE_100KHZ; - /* XXX force bit banging until GMBUS is fully debugged */ - if (bus->has_gpio && IS_GEN2(dev)) - bus->force_bit = true; + intel_gpio_setup(bus, port); } intel_i2c_reset(dev_priv->dev); @@ -403,11 +423,18 @@ err: struct intel_gmbus *bus = &dev_priv->gmbus[i]; i2c_del_adapter(&bus->adapter); } - kfree(dev_priv->gmbus); - dev_priv->gmbus = NULL; return ret; } +struct i2c_adapter *intel_gmbus_get_adapter(struct drm_i915_private *dev_priv, + unsigned port) +{ + WARN_ON(!intel_gmbus_is_port_valid(port)); + /* -1 to map pin pair to gmbus index */ + return (intel_gmbus_is_port_valid(port)) ? + &dev_priv->gmbus[port - 1].adapter : NULL; +} + void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed) { struct intel_gmbus *bus = to_intel_gmbus(adapter); @@ -419,8 +446,7 @@ void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit) { struct intel_gmbus *bus = to_intel_gmbus(adapter); - if (bus->has_gpio) - bus->force_bit = force_bit; + bus->force_bit = force_bit; } void intel_teardown_gmbus(struct drm_device *dev) @@ -435,7 +461,4 @@ void intel_teardown_gmbus(struct drm_device *dev) struct intel_gmbus *bus = &dev_priv->gmbus[i]; i2c_del_adapter(&bus->adapter); } - - kfree(dev_priv->gmbus); - dev_priv->gmbus = NULL; } diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 95db2e988227..17a4630cec8a 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -474,7 +474,7 @@ static int intel_lvds_get_modes(struct drm_connector *connector) static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id *id) { - DRM_DEBUG_KMS("Skipping forced modeset for %s\n", id->ident); + DRM_INFO("Skipping forced modeset for %s\n", id->ident); return 1; } @@ -622,7 +622,7 @@ static const struct drm_encoder_funcs intel_lvds_enc_funcs = { static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id) { - DRM_DEBUG_KMS("Skipping LVDS initialization for %s\n", id->ident); + DRM_INFO("Skipping LVDS initialization for %s\n", id->ident); return 1; } @@ -845,8 +845,8 @@ static bool lvds_is_present_in_vbt(struct drm_device *dev, child->device_type != DEVICE_TYPE_LFP) continue; - if (child->i2c_pin) - *i2c_pin = child->i2c_pin; + if (intel_gmbus_is_port_valid(child->i2c_pin)) + *i2c_pin = child->i2c_pin; /* However, we cannot trust the BIOS writers to populate * the VBT correctly. Since LVDS requires additional @@ -987,7 +987,8 @@ bool intel_lvds_init(struct drm_device *dev) * preferred mode is the right one. */ intel_lvds->edid = drm_get_edid(connector, - &dev_priv->gmbus[pin].adapter); + intel_gmbus_get_adapter(dev_priv, + pin)); if (intel_lvds->edid) { if (drm_add_edid_modes(connector, intel_lvds->edid)) { diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c index d1928e79d9b6..d67ec3a51e42 100644 --- a/drivers/gpu/drm/i915/intel_modes.c +++ b/drivers/gpu/drm/i915/intel_modes.c @@ -56,7 +56,8 @@ bool intel_ddc_probe(struct intel_encoder *intel_encoder, int ddc_bus) } }; - return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 2) == 2; + return i2c_transfer(intel_gmbus_get_adapter(dev_priv, ddc_bus), + msgs, 2) == 2; } /** diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c index 289140bc83cb..34929aeca66b 100644 --- a/drivers/gpu/drm/i915/intel_opregion.c +++ b/drivers/gpu/drm/i915/intel_opregion.c @@ -25,6 +25,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/acpi.h> #include <linux/acpi_io.h> #include <acpi/video.h> @@ -355,7 +357,7 @@ static void intel_didl_outputs(struct drm_device *dev) } if (!acpi_video_bus) { - printk(KERN_WARNING "No ACPI video bus found\n"); + pr_warn("No ACPI video bus found\n"); return; } diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 230a141dbea3..cad45ff8251b 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -28,6 +28,9 @@ * Chris Wilson <chris@chris-wilson.co.uk> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/moduleparam.h> #include "intel_drv.h" #define PCI_LBPC 0xf4 /* legacy/combination backlight modes */ @@ -171,7 +174,7 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev) /* XXX add code here to query mode clock or hardware clock * and program max PWM appropriately. */ - printk_once(KERN_WARNING "fixme: max PWM is zero.\n"); + pr_warn_once("fixme: max PWM is zero\n"); return 1; } @@ -191,6 +194,27 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev) return max; } +static int i915_panel_invert_brightness; +MODULE_PARM_DESC(invert_brightness, "Invert backlight brightness " + "(-1 force normal, 0 machine defaults, 1 force inversion), please " + "report PCI device ID, subsystem vendor and subsystem device ID " + "to dri-devel@lists.freedesktop.org, if your machine needs it. " + "It will then be included in an upcoming module version."); +module_param_named(invert_brightness, i915_panel_invert_brightness, int, 0600); +static u32 intel_panel_compute_brightness(struct drm_device *dev, u32 val) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (i915_panel_invert_brightness < 0) + return val; + + if (i915_panel_invert_brightness > 0 || + dev_priv->quirks & QUIRK_INVERT_BRIGHTNESS) + return intel_panel_get_max_backlight(dev) - val; + + return val; +} + u32 intel_panel_get_backlight(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -211,6 +235,7 @@ u32 intel_panel_get_backlight(struct drm_device *dev) } } + val = intel_panel_compute_brightness(dev, val); DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val); return val; } @@ -228,6 +253,7 @@ static void intel_panel_actually_set_backlight(struct drm_device *dev, u32 level u32 tmp; DRM_DEBUG_DRIVER("set backlight PWM = %d\n", level); + level = intel_panel_compute_brightness(dev, level); if (HAS_PCH_SPLIT(dev)) return intel_pch_panel_set_backlight(dev, level); diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index e25581a9f60f..dfdb613752c5 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -290,9 +290,9 @@ static int init_ring_common(struct intel_ring_buffer *ring) | RING_VALID); /* If the head is still not zero, the ring is dead */ - if ((I915_READ_CTL(ring) & RING_VALID) == 0 || - I915_READ_START(ring) != obj->gtt_offset || - (I915_READ_HEAD(ring) & HEAD_ADDR) != 0) { + if (wait_for((I915_READ_CTL(ring) & RING_VALID) != 0 && + I915_READ_START(ring) == obj->gtt_offset && + (I915_READ_HEAD(ring) & HEAD_ADDR) == 0, 50)) { DRM_ERROR("%s initialization failed " "ctl %08x head %08x tail %08x start %08x\n", ring->name, @@ -687,7 +687,7 @@ render_ring_get_irq(struct intel_ring_buffer *ring) spin_lock(&ring->irq_lock); if (ring->irq_refcount++ == 0) { - if (HAS_PCH_SPLIT(dev)) + if (INTEL_INFO(dev)->gen >= 5) ironlake_enable_irq(dev_priv, GT_PIPE_NOTIFY | GT_USER_INTERRUPT); else @@ -706,7 +706,7 @@ render_ring_put_irq(struct intel_ring_buffer *ring) spin_lock(&ring->irq_lock); if (--ring->irq_refcount == 0) { - if (HAS_PCH_SPLIT(dev)) + if (INTEL_INFO(dev)->gen >= 5) ironlake_disable_irq(dev_priv, GT_USER_INTERRUPT | GT_PIPE_NOTIFY); @@ -788,10 +788,11 @@ ring_add_request(struct intel_ring_buffer *ring, } static bool -gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag) +gen6_ring_get_irq(struct intel_ring_buffer *ring) { struct drm_device *dev = ring->dev; drm_i915_private_t *dev_priv = dev->dev_private; + u32 mask = ring->irq_enable; if (!dev->irq_enabled) return false; @@ -803,9 +804,9 @@ gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag) spin_lock(&ring->irq_lock); if (ring->irq_refcount++ == 0) { - ring->irq_mask &= ~rflag; + ring->irq_mask &= ~mask; I915_WRITE_IMR(ring, ring->irq_mask); - ironlake_enable_irq(dev_priv, gflag); + ironlake_enable_irq(dev_priv, mask); } spin_unlock(&ring->irq_lock); @@ -813,16 +814,17 @@ gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag) } static void -gen6_ring_put_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag) +gen6_ring_put_irq(struct intel_ring_buffer *ring) { struct drm_device *dev = ring->dev; drm_i915_private_t *dev_priv = dev->dev_private; + u32 mask = ring->irq_enable; spin_lock(&ring->irq_lock); if (--ring->irq_refcount == 0) { - ring->irq_mask |= rflag; + ring->irq_mask |= mask; I915_WRITE_IMR(ring, ring->irq_mask); - ironlake_disable_irq(dev_priv, gflag); + ironlake_disable_irq(dev_priv, mask); } spin_unlock(&ring->irq_lock); @@ -1361,38 +1363,6 @@ gen6_ring_dispatch_execbuffer(struct intel_ring_buffer *ring, return 0; } -static bool -gen6_render_ring_get_irq(struct intel_ring_buffer *ring) -{ - return gen6_ring_get_irq(ring, - GT_USER_INTERRUPT, - GEN6_RENDER_USER_INTERRUPT); -} - -static void -gen6_render_ring_put_irq(struct intel_ring_buffer *ring) -{ - return gen6_ring_put_irq(ring, - GT_USER_INTERRUPT, - GEN6_RENDER_USER_INTERRUPT); -} - -static bool -gen6_bsd_ring_get_irq(struct intel_ring_buffer *ring) -{ - return gen6_ring_get_irq(ring, - GT_GEN6_BSD_USER_INTERRUPT, - GEN6_BSD_USER_INTERRUPT); -} - -static void -gen6_bsd_ring_put_irq(struct intel_ring_buffer *ring) -{ - return gen6_ring_put_irq(ring, - GT_GEN6_BSD_USER_INTERRUPT, - GEN6_BSD_USER_INTERRUPT); -} - /* ring buffer for Video Codec for Gen6+ */ static const struct intel_ring_buffer gen6_bsd_ring = { .name = "gen6 bsd ring", @@ -1404,8 +1374,9 @@ static const struct intel_ring_buffer gen6_bsd_ring = { .flush = gen6_ring_flush, .add_request = gen6_add_request, .get_seqno = gen6_ring_get_seqno, - .irq_get = gen6_bsd_ring_get_irq, - .irq_put = gen6_bsd_ring_put_irq, + .irq_enable = GEN6_BSD_USER_INTERRUPT, + .irq_get = gen6_ring_get_irq, + .irq_put = gen6_ring_put_irq, .dispatch_execbuffer = gen6_ring_dispatch_execbuffer, .sync_to = gen6_bsd_ring_sync_to, .semaphore_register = {MI_SEMAPHORE_SYNC_VR, @@ -1416,22 +1387,6 @@ static const struct intel_ring_buffer gen6_bsd_ring = { /* Blitter support (SandyBridge+) */ -static bool -blt_ring_get_irq(struct intel_ring_buffer *ring) -{ - return gen6_ring_get_irq(ring, - GT_BLT_USER_INTERRUPT, - GEN6_BLITTER_USER_INTERRUPT); -} - -static void -blt_ring_put_irq(struct intel_ring_buffer *ring) -{ - gen6_ring_put_irq(ring, - GT_BLT_USER_INTERRUPT, - GEN6_BLITTER_USER_INTERRUPT); -} - static int blt_ring_flush(struct intel_ring_buffer *ring, u32 invalidate, u32 flush) { @@ -1463,8 +1418,9 @@ static const struct intel_ring_buffer gen6_blt_ring = { .flush = blt_ring_flush, .add_request = gen6_add_request, .get_seqno = gen6_ring_get_seqno, - .irq_get = blt_ring_get_irq, - .irq_put = blt_ring_put_irq, + .irq_get = gen6_ring_get_irq, + .irq_put = gen6_ring_put_irq, + .irq_enable = GEN6_BLITTER_USER_INTERRUPT, .dispatch_execbuffer = gen6_ring_dispatch_execbuffer, .sync_to = gen6_blt_ring_sync_to, .semaphore_register = {MI_SEMAPHORE_SYNC_BR, @@ -1482,8 +1438,9 @@ int intel_init_render_ring_buffer(struct drm_device *dev) if (INTEL_INFO(dev)->gen >= 6) { ring->add_request = gen6_add_request; ring->flush = gen6_render_ring_flush; - ring->irq_get = gen6_render_ring_get_irq; - ring->irq_put = gen6_render_ring_put_irq; + ring->irq_get = gen6_ring_get_irq; + ring->irq_put = gen6_ring_put_irq; + ring->irq_enable = GT_USER_INTERRUPT; ring->get_seqno = gen6_ring_get_seqno; } else if (IS_GEN5(dev)) { ring->add_request = pc_render_add_request; @@ -1506,8 +1463,9 @@ int intel_render_ring_init_dri(struct drm_device *dev, u64 start, u32 size) *ring = render_ring; if (INTEL_INFO(dev)->gen >= 6) { ring->add_request = gen6_add_request; - ring->irq_get = gen6_render_ring_get_irq; - ring->irq_put = gen6_render_ring_put_irq; + ring->irq_get = gen6_ring_get_irq; + ring->irq_put = gen6_ring_put_irq; + ring->irq_enable = GT_USER_INTERRUPT; } else if (IS_GEN5(dev)) { ring->add_request = pc_render_add_request; ring->get_seqno = pc_render_get_seqno; diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h index bc0365b8fa4d..3488a5a127db 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.h +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h @@ -59,6 +59,7 @@ struct intel_ring_buffer { spinlock_t irq_lock; u32 irq_refcount; u32 irq_mask; + u32 irq_enable; /* IRQs enabled for this ring */ u32 irq_seqno; /* last seq seem at irq time */ u32 trace_irq_seqno; u32 waiting_seqno; diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index e36b171c1e7d..6898145b44ce 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -41,7 +41,7 @@ #define SDVO_TMDS_MASK (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1) #define SDVO_RGB_MASK (SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1) #define SDVO_LVDS_MASK (SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1) -#define SDVO_TV_MASK (SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_SVID0) +#define SDVO_TV_MASK (SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_YPRPB0) #define SDVO_OUTPUT_MASK (SDVO_TMDS_MASK | SDVO_RGB_MASK | SDVO_LVDS_MASK |\ SDVO_TV_MASK) @@ -74,7 +74,7 @@ struct intel_sdvo { struct i2c_adapter ddc; /* Register for the SDVO device: SDVOB or SDVOC */ - int sdvo_reg; + uint32_t sdvo_reg; /* Active outputs controlled by this SDVO output */ uint16_t controlled_output; @@ -114,6 +114,9 @@ struct intel_sdvo { */ bool is_tv; + /* On different gens SDVOB is at different places. */ + bool is_sdvob; + /* This is for current tv format name */ int tv_format_index; @@ -403,8 +406,7 @@ static const struct _sdvo_cmd_name { SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_DATA), }; -#define IS_SDVOB(reg) (reg == SDVOB || reg == PCH_SDVOB) -#define SDVO_NAME(svdo) (IS_SDVOB((svdo)->sdvo_reg) ? "SDVOB" : "SDVOC") +#define SDVO_NAME(svdo) ((svdo)->is_sdvob ? "SDVOB" : "SDVOC") static void intel_sdvo_debug_write(struct intel_sdvo *intel_sdvo, u8 cmd, const void *args, int args_len) @@ -1252,7 +1254,8 @@ intel_sdvo_get_analog_edid(struct drm_connector *connector) struct drm_i915_private *dev_priv = connector->dev->dev_private; return drm_get_edid(connector, - &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter); + intel_gmbus_get_adapter(dev_priv, + dev_priv->crt_ddc_pin)); } enum drm_connector_status @@ -1341,8 +1344,7 @@ intel_sdvo_detect(struct drm_connector *connector, bool force) return connector_status_unknown; /* add 30ms delay when the output type might be TV */ - if (intel_sdvo->caps.output_flags & - (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_CVBS0)) + if (intel_sdvo->caps.output_flags & SDVO_TV_MASK) mdelay(30); if (!intel_sdvo_read_response(intel_sdvo, &response, 2)) @@ -1893,7 +1895,7 @@ intel_sdvo_select_ddc_bus(struct drm_i915_private *dev_priv, { struct sdvo_device_mapping *mapping; - if (IS_SDVOB(reg)) + if (sdvo->is_sdvob) mapping = &(dev_priv->sdvo_mappings[0]); else mapping = &(dev_priv->sdvo_mappings[1]); @@ -1911,7 +1913,7 @@ intel_sdvo_select_i2c_bus(struct drm_i915_private *dev_priv, struct sdvo_device_mapping *mapping; u8 pin; - if (IS_SDVOB(reg)) + if (sdvo->is_sdvob) mapping = &dev_priv->sdvo_mappings[0]; else mapping = &dev_priv->sdvo_mappings[1]; @@ -1920,12 +1922,12 @@ intel_sdvo_select_i2c_bus(struct drm_i915_private *dev_priv, if (mapping->initialized) pin = mapping->i2c_pin; - if (pin < GMBUS_NUM_PORTS) { - sdvo->i2c = &dev_priv->gmbus[pin].adapter; + if (intel_gmbus_is_port_valid(pin)) { + sdvo->i2c = intel_gmbus_get_adapter(dev_priv, pin); intel_gmbus_set_speed(sdvo->i2c, GMBUS_RATE_1MHZ); intel_gmbus_force_bit(sdvo->i2c, true); } else { - sdvo->i2c = &dev_priv->gmbus[GMBUS_PORT_DPB].adapter; + sdvo->i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB); } } @@ -1936,12 +1938,12 @@ intel_sdvo_is_hdmi_connector(struct intel_sdvo *intel_sdvo, int device) } static u8 -intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg) +intel_sdvo_get_slave_addr(struct drm_device *dev, struct intel_sdvo *sdvo) { struct drm_i915_private *dev_priv = dev->dev_private; struct sdvo_device_mapping *my_mapping, *other_mapping; - if (IS_SDVOB(sdvo_reg)) { + if (sdvo->is_sdvob) { my_mapping = &dev_priv->sdvo_mappings[0]; other_mapping = &dev_priv->sdvo_mappings[1]; } else { @@ -1966,7 +1968,7 @@ intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg) /* No SDVO device info is found for another DVO port, * so use mapping assumption we had before BIOS parsing. */ - if (IS_SDVOB(sdvo_reg)) + if (sdvo->is_sdvob) return 0x70; else return 0x72; @@ -2191,6 +2193,10 @@ intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags) if (!intel_sdvo_tv_init(intel_sdvo, SDVO_OUTPUT_CVBS0)) return false; + if (flags & SDVO_OUTPUT_YPRPB0) + if (!intel_sdvo_tv_init(intel_sdvo, SDVO_OUTPUT_YPRPB0)) + return false; + if (flags & SDVO_OUTPUT_RGB0) if (!intel_sdvo_analog_init(intel_sdvo, 0)) return false; @@ -2482,7 +2488,7 @@ intel_sdvo_init_ddc_proxy(struct intel_sdvo *sdvo, return i2c_add_adapter(&sdvo->ddc) == 0; } -bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg) +bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_encoder *intel_encoder; @@ -2494,7 +2500,8 @@ bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg) return false; intel_sdvo->sdvo_reg = sdvo_reg; - intel_sdvo->slave_addr = intel_sdvo_get_slave_addr(dev, sdvo_reg) >> 1; + intel_sdvo->is_sdvob = is_sdvob; + intel_sdvo->slave_addr = intel_sdvo_get_slave_addr(dev, intel_sdvo) >> 1; intel_sdvo_select_i2c_bus(dev_priv, intel_sdvo, sdvo_reg); if (!intel_sdvo_init_ddc_proxy(intel_sdvo, dev)) { kfree(intel_sdvo); @@ -2511,13 +2518,13 @@ bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg) u8 byte; if (!intel_sdvo_read_byte(intel_sdvo, i, &byte)) { - DRM_DEBUG_KMS("No SDVO device found on SDVO%c\n", - IS_SDVOB(sdvo_reg) ? 'B' : 'C'); + DRM_DEBUG_KMS("No SDVO device found on %s\n", + SDVO_NAME(intel_sdvo)); goto err; } } - if (IS_SDVOB(sdvo_reg)) + if (intel_sdvo->is_sdvob) dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS; else dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS; @@ -2538,8 +2545,8 @@ bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg) if (intel_sdvo_output_setup(intel_sdvo, intel_sdvo->caps.output_flags) != true) { - DRM_DEBUG_KMS("SDVO output failed to setup on SDVO%c\n", - IS_SDVOB(sdvo_reg) ? 'B' : 'C'); + DRM_DEBUG_KMS("SDVO output failed to setup on %s\n", + SDVO_NAME(intel_sdvo)); goto err; } diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index 05f765ef5464..ca12c709f3eb 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1153,6 +1153,15 @@ intel_tv_detect_type(struct intel_tv *intel_tv, DAC_B_0_7_V | DAC_C_0_7_V); + + /* + * The TV sense state should be cleared to zero on cantiga platform. Otherwise + * the TV is misdetected. This is hardware requirement. + */ + if (IS_GM45(dev)) + tv_dac &= ~(TVDAC_STATE_CHG_EN | TVDAC_A_SENSE_CTL | + TVDAC_B_SENSE_CTL | TVDAC_C_SENSE_CTL); + I915_WRITE(TV_CTL, tv_ctl); I915_WRITE(TV_DAC, tv_dac); POSTING_READ(TV_DAC); |