Merge 3.1-rc4 into usb-next

This was done to resolve a conflict in this file:
	drivers/usb/host/xhci-ring.c

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

101 files changed, 6995 insertions, 428 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 48f1781352f1..2651852952be 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -69,6 +69,7 @@ config USB_ARCH_HAS_EHCI
 	default y if ARCH_MSM
 	default y if MICROBLAZE
 	default y if SPARC_LEON
+	default y if ARCH_MMP
 	default PCI
 
 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
@@ -110,6 +111,8 @@ config USB
 
 source "drivers/usb/core/Kconfig"
 
+source "drivers/usb/dwc3/Kconfig"
+
 source "drivers/usb/mon/Kconfig"
 
 source "drivers/usb/wusbcore/Kconfig"
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 30ddf8dc4f72..969b0a50bc98 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -6,6 +6,8 @@
 
 obj-$(CONFIG_USB)		+= core/
 
+obj-$(CONFIG_USB_DWC3)		+= dwc3/
+
 obj-$(CONFIG_USB_MON)		+= mon/
 
 obj-$(CONFIG_PCI)		+= host/
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index dac7676ce21b..f69a1854a59c 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1058,11 +1058,11 @@ made_compressed_probe:
 		goto alloc_fail;
 	}
 
-	ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize);
-	readsize = le16_to_cpu(epread->wMaxPacketSize) *
+	ctrlsize = usb_endpoint_maxp(epctrl);
+	readsize = usb_endpoint_maxp(epread) *
 				(quirks == SINGLE_RX_URB ? 1 : 2);
 	acm->combined_interfaces = combined_interfaces;
-	acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize) * 20;
+	acm->writesize = usb_endpoint_maxp(epwrite) * 20;
 	acm->control = control_interface;
 	acm->data = data_interface;
 	acm->minor = minor;
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 2b9ff518b509..1d26a7135dd9 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -682,7 +682,7 @@ next_desc:
 	if (!ep || !usb_endpoint_is_int_in(ep))
 		goto err;
 
-	desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize);
+	desc->wMaxPacketSize = usb_endpoint_maxp(ep);
 	desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0;
 
 	desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 3f94ac34dce3..12cf5e7395a8 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -186,8 +186,7 @@ static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data)
 	for (n = 0; n < current_setting->desc.bNumEndpoints; n++)
 		if (current_setting->endpoint[n].desc.bEndpointAddress ==
 			data->bulk_in)
-			max_size = le16_to_cpu(current_setting->endpoint[n].
-						desc.wMaxPacketSize);
+			max_size = usb_endpoint_maxp(&current_setting->endpoint[n].desc);
 
 	if (max_size == 0) {
 		dev_err(dev, "Couldn't get wMaxPacketSize\n");
@@ -636,7 +635,7 @@ static int usbtmc_ioctl_clear(struct usbtmc_device_data *data)
 	for (n = 0; n < current_setting->desc.bNumEndpoints; n++) {
 		desc = &current_setting->endpoint[n].desc;
 		if (desc->bEndpointAddress == data->bulk_in)
-			max_size = le16_to_cpu(desc->wMaxPacketSize);
+			max_size = usb_endpoint_maxp(desc);
 	}
 
 	if (max_size == 0) {
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 26678cadfb21..9d5e07af55be 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -124,9 +124,9 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 
 	if (usb_endpoint_xfer_isoc(&ep->desc))
 		max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) *
-			le16_to_cpu(ep->desc.wMaxPacketSize);
+			usb_endpoint_maxp(&ep->desc);
 	else if (usb_endpoint_xfer_int(&ep->desc))
-		max_tx = le16_to_cpu(ep->desc.wMaxPacketSize) *
+		max_tx = usb_endpoint_maxp(&ep->desc) *
 			(desc->bMaxBurst + 1);
 	else
 		max_tx = 999999;
@@ -241,7 +241,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 		    cfgno, inum, asnum, d->bEndpointAddress);
 		endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT;
 		endpoint->desc.bInterval = 1;
-		if (le16_to_cpu(endpoint->desc.wMaxPacketSize) > 8)
+		if (usb_endpoint_maxp(&endpoint->desc) > 8)
 			endpoint->desc.wMaxPacketSize = cpu_to_le16(8);
 	}
 
@@ -254,7 +254,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 			&& usb_endpoint_xfer_bulk(d)) {
 		unsigned maxp;
 
-		maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize) & 0x07ff;
+		maxp = usb_endpoint_maxp(&endpoint->desc) & 0x07ff;
 		if (maxp != 512)
 			dev_warn(ddev, "config %d interface %d altsetting %d "
 				"bulk endpoint 0x%X has invalid maxpacket %d\n",
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 0149c0976e9c..d95696584762 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -190,7 +190,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
 	dir = usb_endpoint_dir_in(desc) ? 'I' : 'O';
 
 	if (speed == USB_SPEED_HIGH) {
-		switch (le16_to_cpu(desc->wMaxPacketSize) & (0x03 << 11)) {
+		switch (usb_endpoint_maxp(desc) & (0x03 << 11)) {
 		case 1 << 11:
 			bandwidth = 2; break;
 		case 2 << 11:
@@ -240,7 +240,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
 
 	start += sprintf(start, format_endpt, desc->bEndpointAddress, dir,
 			 desc->bmAttributes, type,
-			 (le16_to_cpu(desc->wMaxPacketSize) & 0x07ff) *
+			 (usb_endpoint_maxp(desc) & 0x07ff) *
 			 bandwidth,
 			 interval, unit);
 	return start;
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index df502a98d0df..db7fe50c23d4 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -56,7 +56,7 @@ static ssize_t show_ep_wMaxPacketSize(struct device *dev,
 {
 	struct ep_device *ep = to_ep_device(dev);
 	return sprintf(buf, "%04x\n",
-			le16_to_cpu(ep->desc->wMaxPacketSize) & 0x07ff);
+		        usb_endpoint_maxp(ep->desc) & 0x07ff);
 }
 static DEVICE_ATTR(wMaxPacketSize, S_IRUGO, show_ep_wMaxPacketSize, NULL);
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a428aa080a36..338f91ff54cb 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1636,11 +1636,6 @@ void usb_disconnect(struct usb_device **pdev)
 	int			i;
 	struct usb_hcd		*hcd = bus_to_hcd(udev->bus);
 
-	if (!udev) {
-		pr_debug ("%s nodev\n", __func__);
-		return;
-	}
-
 	/* mark the device as inactive, so any further urb submissions for
 	 * this device (and any of its children) will fail immediately.
 	 * this quiesces everything except pending urbs.
@@ -3023,7 +3018,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 		i = 512;
 	else
 		i = udev->descriptor.bMaxPacketSize0;
-	if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) {
+	if (usb_endpoint_maxp(&udev->ep0.desc) != i) {
 		if (udev->speed == USB_SPEED_LOW ||
 				!(i == 8 || i == 16 || i == 32 || i == 64)) {
 			dev_err(&udev->dev, "Invalid ep0 maxpacket: %d\n", i);
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index ae334b067c13..909625b91eb3 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -350,7 +350,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 			dev->state < USB_STATE_CONFIGURED)
 		return -ENODEV;
 
-	max = le16_to_cpu(ep->desc.wMaxPacketSize);
+	max = usb_endpoint_maxp(&ep->desc);
 	if (max <= 0) {
 		dev_dbg(&dev->dev,
 			"bogus endpoint ep%d%s in %s (bad maxpacket %d)\n",
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
new file mode 100644
index 000000000000..3c1d67d324fd
--- /dev/null
+++ b/drivers/usb/dwc3/Kconfig
@@ -0,0 +1,25 @@
+config USB_DWC3
+	tristate "DesignWare USB3 DRD Core Support"
+	depends on (USB || USB_GADGET)
+	select USB_OTG_UTILS
+	help
+	  Say Y or M here if your system has a Dual Role SuperSpeed
+	  USB controller based on the DesignWare USB3 IP Core.
+
+	  If you choose to build this driver is a dynamically linked
+	  module, the module will be called dwc3.ko.
+
+if USB_DWC3
+
+config USB_DWC3_DEBUG
+	bool "Enable Debugging Messages"
+	help
+	  Say Y here to enable debugging messages on DWC3 Driver.
+
+config USB_DWC3_VERBOSE
+	bool "Enable Verbose Debugging Messages"
+	depends on USB_DWC3_DEBUG
+	help
+	  Say Y here to enable verbose debugging messages on DWC3 Driver.
+
+endif
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
new file mode 100644
index 000000000000..593d1dbc465b
--- /dev/null
+++ b/drivers/usb/dwc3/Makefile
@@ -0,0 +1,36 @@
+ccflags-$(CONFIG_USB_DWC3_DEBUG)	:= -DDEBUG
+ccflags-$(CONFIG_USB_DWC3_VERBOSE)	+= -DVERBOSE_DEBUG
+
+obj-$(CONFIG_USB_DWC3)			+= dwc3.o
+
+dwc3-y					:= core.o
+
+ifneq ($(CONFIG_USB_GADGET_DWC3),)
+	dwc3-y				+= gadget.o ep0.o
+endif
+
+ifneq ($(CONFIG_DEBUG_FS),)
+	dwc3-y				+= debugfs.o
+endif
+
+##
+# Platform-specific glue layers go here
+#
+# NOTICE: Make sure your glue layer doesn't depend on anything
+# which is arch-specific and that it compiles on all situations.
+#
+# We want to keep this requirement in order to be able to compile
+# the entire driver (with all its glue layers) on several architectures
+# and make sure it compiles fine. This will also help with allmodconfig
+# and allyesconfig builds.
+#
+# The only exception is the PCI glue layer, but that's only because
+# PCI doesn't provide nops if CONFIG_PCI isn't enabled.
+##
+
+obj-$(CONFIG_USB_DWC3)		+= dwc3-omap.o
+
+ifneq ($(CONFIG_PCI),)
+	obj-$(CONFIG_USB_DWC3)		+= dwc3-pci.o
+endif
+
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
new file mode 100644
index 000000000000..443e4fb9b8f3
--- /dev/null
+++ b/drivers/usb/dwc3/core.c
@@ -0,0 +1,467 @@
+/**
+ * core.c - DesignWare USB3 DRD Controller Core file
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "core.h"
+#include "gadget.h"
+#include "io.h"
+
+#include "debug.h"
+
+/**
+ * dwc3_core_soft_reset - Issues core soft reset and PHY reset
+ * @dwc: pointer to our context structure
+ */
+static void dwc3_core_soft_reset(struct dwc3 *dwc)
+{
+	u32		reg;
+
+	/* Before Resetting PHY, put Core in Reset */
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg |= DWC3_GCTL_CORESOFTRESET;
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+	/* Assert USB3 PHY reset */
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+	reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST;
+	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+
+	/* Assert USB2 PHY reset */
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+	reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+
+	mdelay(100);
+
+	/* Clear USB3 PHY reset */
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+	reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
+	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+
+	/* Clear USB2 PHY reset */
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+	reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+
+	/* After PHYs are stable we can take Core out of reset state */
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg &= ~DWC3_GCTL_CORESOFTRESET;
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+}
+
+/**
+ * dwc3_free_one_event_buffer - Frees one event buffer
+ * @dwc: Pointer to our controller context structure
+ * @evt: Pointer to event buffer to be freed
+ */
+static void dwc3_free_one_event_buffer(struct dwc3 *dwc,
+		struct dwc3_event_buffer *evt)
+{
+	dma_free_coherent(dwc->dev, evt->length, evt->buf, evt->dma);
+	kfree(evt);
+}
+
+/**
+ * dwc3_alloc_one_event_buffer - Allocated one event buffer structure
+ * @dwc: Pointer to our controller context structure
+ * @length: size of the event buffer
+ *
+ * Returns a pointer to the allocated event buffer structure on succes
+ * otherwise ERR_PTR(errno).
+ */
+static struct dwc3_event_buffer *__devinit
+dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length)
+{
+	struct dwc3_event_buffer	*evt;
+
+	evt = kzalloc(sizeof(*evt), GFP_KERNEL);
+	if (!evt)
+		return ERR_PTR(-ENOMEM);
+
+	evt->dwc	= dwc;
+	evt->length	= length;
+	evt->buf	= dma_alloc_coherent(dwc->dev, length,
+			&evt->dma, GFP_KERNEL);
+	if (!evt->buf) {
+		kfree(evt);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	return evt;
+}
+
+/**
+ * dwc3_free_event_buffers - frees all allocated event buffers
+ * @dwc: Pointer to our controller context structure
+ */
+static void dwc3_free_event_buffers(struct dwc3 *dwc)
+{
+	struct dwc3_event_buffer	*evt;
+	int i;
+
+	for (i = 0; i < DWC3_EVENT_BUFFERS_NUM; i++) {
+		evt = dwc->ev_buffs[i];
+		if (evt) {
+			dwc3_free_one_event_buffer(dwc, evt);
+			dwc->ev_buffs[i] = NULL;
+		}
+	}
+}
+
+/**
+ * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length
+ * @dwc: Pointer to out controller context structure
+ * @num: number of event buffers to allocate
+ * @length: size of event buffer
+ *
+ * Returns 0 on success otherwise negative errno. In error the case, dwc
+ * may contain some buffers allocated but not all which were requested.
+ */
+static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned num,
+		unsigned length)
+{
+	int			i;
+
+	for (i = 0; i < num; i++) {
+		struct dwc3_event_buffer	*evt;
+
+		evt = dwc3_alloc_one_event_buffer(dwc, length);
+		if (IS_ERR(evt)) {
+			dev_err(dwc->dev, "can't allocate event buffer\n");
+			return PTR_ERR(evt);
+		}
+		dwc->ev_buffs[i] = evt;
+	}
+
+	return 0;
+}
+
+/**
+ * dwc3_event_buffers_setup - setup our allocated event buffers
+ * @dwc: Pointer to out controller context structure
+ *
+ * Returns 0 on success otherwise negative errno.
+ */
+static int __devinit dwc3_event_buffers_setup(struct dwc3 *dwc)
+{
+	struct dwc3_event_buffer	*evt;
+	int				n;
+
+	for (n = 0; n < DWC3_EVENT_BUFFERS_NUM; n++) {
+		evt = dwc->ev_buffs[n];
+		dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n",
+				evt->buf, (unsigned long long) evt->dma,
+				evt->length);
+
+		dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n),
+				lower_32_bits(evt->dma));
+		dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n),
+				upper_32_bits(evt->dma));
+		dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n),
+				evt->length & 0xffff);
+		dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0);
+	}
+
+	return 0;
+}
+
+static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
+{
+	struct dwc3_event_buffer	*evt;
+	int				n;
+
+	for (n = 0; n < DWC3_EVENT_BUFFERS_NUM; n++) {
+		evt = dwc->ev_buffs[n];
+		dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0);
+		dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0);
+		dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), 0);
+		dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0);
+	}
+}
+
+/**
+ * dwc3_core_init - Low-level initialization of DWC3 Core
+ * @dwc: Pointer to our controller context structure
+ *
+ * Returns 0 on success otherwise negative errno.
+ */
+static int __devinit dwc3_core_init(struct dwc3 *dwc)
+{
+	unsigned long		timeout;
+	u32			reg;
+	int			ret;
+
+	dwc3_core_soft_reset(dwc);
+
+	/* issue device SoftReset too */
+	timeout = jiffies + msecs_to_jiffies(500);
+	dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST);
+	do {
+		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+		if (!(reg & DWC3_DCTL_CSFTRST))
+			break;
+
+		if (time_after(jiffies, timeout)) {
+			dev_err(dwc->dev, "Reset Timed Out\n");
+			ret = -ETIMEDOUT;
+			goto err0;
+		}
+
+		cpu_relax();
+	} while (true);
+
+	reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
+	/* This should read as U3 followed by revision number */
+	if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) {
+		dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
+		ret = -ENODEV;
+		goto err0;
+	}
+
+	dwc->revision = reg & DWC3_GSNPSREV_MASK;
+
+	ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_NUM,
+			DWC3_EVENT_BUFFERS_SIZE);
+	if (ret) {
+		dev_err(dwc->dev, "failed to allocate event buffers\n");
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	ret = dwc3_event_buffers_setup(dwc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to setup event buffers\n");
+		goto err1;
+	}
+
+	return 0;
+
+err1:
+	dwc3_free_event_buffers(dwc);
+
+err0:
+	return ret;
+}
+
+static void dwc3_core_exit(struct dwc3 *dwc)
+{
+	dwc3_event_buffers_cleanup(dwc);
+	dwc3_free_event_buffers(dwc);
+}
+
+#define DWC3_ALIGN_MASK		(16 - 1)
+
+static int __devinit dwc3_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct resource		*res;
+	struct dwc3		*dwc;
+	void __iomem		*regs;
+	unsigned int		features = id->driver_data;
+	int			ret = -ENOMEM;
+	int			irq;
+	void			*mem;
+
+	mem = kzalloc(sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL);
+	if (!mem) {
+		dev_err(&pdev->dev, "not enough memory\n");
+		goto err0;
+	}
+	dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1);
+	dwc->mem = mem;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "missing resource\n");
+		goto err1;
+	}
+
+	res = request_mem_region(res->start, resource_size(res),
+			dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "can't request mem region\n");
+		goto err1;
+	}
+
+	regs = ioremap(res->start, resource_size(res));
+	if (!regs) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		goto err2;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "missing IRQ\n");
+		goto err3;
+	}
+
+	spin_lock_init(&dwc->lock);
+	platform_set_drvdata(pdev, dwc);
+
+	dwc->regs	= regs;
+	dwc->regs_size	= resource_size(res);
+	dwc->dev	= &pdev->dev;
+	dwc->irq	= irq;
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+	pm_runtime_forbid(&pdev->dev);
+
+	ret = dwc3_core_init(dwc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize core\n");
+		goto err3;
+	}
+
+	if (features & DWC3_HAS_PERIPHERAL) {
+		ret = dwc3_gadget_init(dwc);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to initialized gadget\n");
+			goto err4;
+		}
+	}
+
+	ret = dwc3_debugfs_init(dwc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize debugfs\n");
+		goto err5;
+	}
+
+	pm_runtime_allow(&pdev->dev);
+
+	return 0;
+
+err5:
+	if (features & DWC3_HAS_PERIPHERAL)
+		dwc3_gadget_exit(dwc);
+
+err4:
+	dwc3_core_exit(dwc);
+
+err3:
+	iounmap(regs);
+
+err2:
+	release_mem_region(res->start, resource_size(res));
+
+err1:
+	kfree(dwc->mem);
+
+err0:
+	return ret;
+}
+
+static int __devexit dwc3_remove(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct dwc3	*dwc = platform_get_drvdata(pdev);
+	struct resource	*res;
+	unsigned int	features = id->driver_data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	dwc3_debugfs_exit(dwc);
+
+	if (features & DWC3_HAS_PERIPHERAL)
+		dwc3_gadget_exit(dwc);
+
+	dwc3_core_exit(dwc);
+	release_mem_region(res->start, resource_size(res));
+	iounmap(dwc->regs);
+	kfree(dwc->mem);
+
+	return 0;
+}
+
+static const struct platform_device_id dwc3_id_table[] __devinitconst = {
+	{
+		.name	= "dwc3-omap",
+		.driver_data = (DWC3_HAS_PERIPHERAL
+			| DWC3_HAS_XHCI
+			| DWC3_HAS_OTG),
+	},
+	{
+		.name	= "dwc3-pci",
+		.driver_data = DWC3_HAS_PERIPHERAL,
+	},
+	{  },	/* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(platform, dwc3_id_table);
+
+static struct platform_driver dwc3_driver = {
+	.probe		= dwc3_probe,
+	.remove		= __devexit_p(dwc3_remove),
+	.driver		= {
+		.name	= "dwc3",
+	},
+	.id_table	= dwc3_id_table,
+};
+
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver");
+
+static int __devinit dwc3_init(void)
+{
+	return platform_driver_register(&dwc3_driver);
+}
+module_init(dwc3_init);
+
+static void __exit dwc3_exit(void)
+{
+	platform_driver_unregister(&dwc3_driver);
+}
+module_exit(dwc3_exit);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
new file mode 100644
index 000000000000..83b2960cccd7
--- /dev/null
+++ b/drivers/usb/dwc3/core.h
@@ -0,0 +1,709 @@
+/**
+ * core.h - DesignWare USB3 DRD Core Header
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DRIVERS_USB_DWC3_CORE_H
+#define __DRIVERS_USB_DWC3_CORE_H
+
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/debugfs.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* Global constants */
+#define DWC3_ENDPOINTS_NUM	32
+
+#define DWC3_EVENT_BUFFERS_NUM	2
+#define DWC3_EVENT_BUFFERS_SIZE	PAGE_SIZE
+#define DWC3_EVENT_TYPE_MASK	0xfe
+
+#define DWC3_EVENT_TYPE_DEV	0
+#define DWC3_EVENT_TYPE_CARKIT	3
+#define DWC3_EVENT_TYPE_I2C	4
+
+#define DWC3_DEVICE_EVENT_DISCONNECT		0
+#define DWC3_DEVICE_EVENT_RESET			1
+#define DWC3_DEVICE_EVENT_CONNECT_DONE		2
+#define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE	3
+#define DWC3_DEVICE_EVENT_WAKEUP		4
+#define DWC3_DEVICE_EVENT_EOPF			6
+#define DWC3_DEVICE_EVENT_SOF			7
+#define DWC3_DEVICE_EVENT_ERRATIC_ERROR		9
+#define DWC3_DEVICE_EVENT_CMD_CMPL		10
+#define DWC3_DEVICE_EVENT_OVERFLOW		11
+
+#define DWC3_GEVNTCOUNT_MASK	0xfffc
+#define DWC3_GSNPSID_MASK	0xffff0000
+#define DWC3_GSNPSREV_MASK	0xffff
+
+/* Global Registers */
+#define DWC3_GSBUSCFG0		0xc100
+#define DWC3_GSBUSCFG1		0xc104
+#define DWC3_GTXTHRCFG		0xc108
+#define DWC3_GRXTHRCFG		0xc10c
+#define DWC3_GCTL		0xc110
+#define DWC3_GEVTEN		0xc114
+#define DWC3_GSTS		0xc118
+#define DWC3_GSNPSID		0xc120
+#define DWC3_GGPIO		0xc124
+#define DWC3_GUID		0xc128
+#define DWC3_GUCTL		0xc12c
+#define DWC3_GBUSERRADDR0	0xc130
+#define DWC3_GBUSERRADDR1	0xc134
+#define DWC3_GPRTBIMAP0		0xc138
+#define DWC3_GPRTBIMAP1		0xc13c
+#define DWC3_GHWPARAMS0		0xc140
+#define DWC3_GHWPARAMS1		0xc144
+#define DWC3_GHWPARAMS2		0xc148
+#define DWC3_GHWPARAMS3		0xc14c
+#define DWC3_GHWPARAMS4		0xc150
+#define DWC3_GHWPARAMS5		0xc154
+#define DWC3_GHWPARAMS6		0xc158
+#define DWC3_GHWPARAMS7		0xc15c
+#define DWC3_GDBGFIFOSPACE	0xc160
+#define DWC3_GDBGLTSSM		0xc164
+#define DWC3_GPRTBIMAP_HS0	0xc180
+#define DWC3_GPRTBIMAP_HS1	0xc184
+#define DWC3_GPRTBIMAP_FS0	0xc188
+#define DWC3_GPRTBIMAP_FS1	0xc18c
+
+#define DWC3_GUSB2PHYCFG(n)	(0xc200 + (n * 0x04))
+#define DWC3_GUSB2I2CCTL(n)	(0xc240 + (n * 0x04))
+
+#define DWC3_GUSB2PHYACC(n)	(0xc280 + (n * 0x04))
+
+#define DWC3_GUSB3PIPECTL(n)	(0xc2c0 + (n * 0x04))
+
+#define DWC3_GTXFIFOSIZ(n)	(0xc300 + (n * 0x04))
+#define DWC3_GRXFIFOSIZ(n)	(0xc380 + (n * 0x04))
+
+#define DWC3_GEVNTADRLO(n)	(0xc400 + (n * 0x10))
+#define DWC3_GEVNTADRHI(n)	(0xc404 + (n * 0x10))
+#define DWC3_GEVNTSIZ(n)	(0xc408 + (n * 0x10))
+#define DWC3_GEVNTCOUNT(n)	(0xc40c + (n * 0x10))
+
+#define DWC3_GHWPARAMS8		0xc600
+
+/* Device Registers */
+#define DWC3_DCFG		0xc700
+#define DWC3_DCTL		0xc704
+#define DWC3_DEVTEN		0xc708
+#define DWC3_DSTS		0xc70c
+#define DWC3_DGCMDPAR		0xc710
+#define DWC3_DGCMD		0xc714
+#define DWC3_DALEPENA		0xc720
+#define DWC3_DEPCMDPAR2(n)	(0xc800 + (n * 0x10))
+#define DWC3_DEPCMDPAR1(n)	(0xc804 + (n * 0x10))
+#define DWC3_DEPCMDPAR0(n)	(0xc808 + (n * 0x10))
+#define DWC3_DEPCMD(n)		(0xc80c + (n * 0x10))
+
+/* OTG Registers */
+#define DWC3_OCFG		0xcc00
+#define DWC3_OCTL		0xcc04
+#define DWC3_OEVTEN		0xcc08
+#define DWC3_OSTS		0xcc0C
+
+/* Bit fields */
+
+/* Global Configuration Register */
+#define DWC3_GCTL_PWRDNSCALE(n)	(n << 19)
+#define DWC3_GCTL_U2RSTECN	16
+#define DWC3_GCTL_RAMCLKSEL(x)	((x & DWC3_GCTL_CLK_MASK) << 6)
+#define DWC3_GCTL_CLK_BUS	(0)
+#define DWC3_GCTL_CLK_PIPE	(1)
+#define DWC3_GCTL_CLK_PIPEHALF	(2)
+#define DWC3_GCTL_CLK_MASK	(3)
+
+#define DWC3_GCTL_PRTCAPDIR(n)	(n << 12)
+#define DWC3_GCTL_PRTCAP_HOST	1
+#define DWC3_GCTL_PRTCAP_DEVICE	2
+#define DWC3_GCTL_PRTCAP_OTG	3
+
+#define DWC3_GCTL_CORESOFTRESET	(1 << 11)
+#define DWC3_GCTL_DISSCRAMBLE	(1 << 3)
+
+/* Global USB2 PHY Configuration Register */
+#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
+#define DWC3_GUSB2PHYCFG_SUSPHY	(1 << 6)
+
+/* Global USB3 PIPE Control Register */
+#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
+#define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17)
+
+/* Device Configuration Register */
+#define DWC3_DCFG_DEVADDR(addr)	((addr) << 3)
+#define DWC3_DCFG_DEVADDR_MASK	DWC3_DCFG_DEVADDR(0x7f)
+
+#define DWC3_DCFG_SPEED_MASK	(7 << 0)
+#define DWC3_DCFG_SUPERSPEED	(4 << 0)
+#define DWC3_DCFG_HIGHSPEED	(0 << 0)
+#define DWC3_DCFG_FULLSPEED2	(1 << 0)
+#define DWC3_DCFG_LOWSPEED	(2 << 0)
+#define DWC3_DCFG_FULLSPEED1	(3 << 0)
+
+/* Device Control Register */
+#define DWC3_DCTL_RUN_STOP	(1 << 31)
+#define DWC3_DCTL_CSFTRST	(1 << 30)
+#define DWC3_DCTL_LSFTRST	(1 << 29)
+
+#define DWC3_DCTL_HIRD_THRES_MASK	(0x1f << 24)
+#define DWC3_DCTL_HIRD_THRES(n)	(((n) & DWC3_DCTL_HIRD_THRES_MASK) >> 24)
+
+#define DWC3_DCTL_APPL1RES	(1 << 23)
+
+#define DWC3_DCTL_INITU2ENA	(1 << 12)
+#define DWC3_DCTL_ACCEPTU2ENA	(1 << 11)
+#define DWC3_DCTL_INITU1ENA	(1 << 10)
+#define DWC3_DCTL_ACCEPTU1ENA	(1 << 9)
+#define DWC3_DCTL_TSTCTRL_MASK	(0xf << 1)
+
+#define DWC3_DCTL_ULSTCHNGREQ_MASK	(0x0f << 5)
+#define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK)
+
+#define DWC3_DCTL_ULSTCHNG_NO_ACTION	(DWC3_DCTL_ULSTCHNGREQ(0))
+#define DWC3_DCTL_ULSTCHNG_SS_DISABLED	(DWC3_DCTL_ULSTCHNGREQ(4))
+#define DWC3_DCTL_ULSTCHNG_RX_DETECT	(DWC3_DCTL_ULSTCHNGREQ(5))
+#define DWC3_DCTL_ULSTCHNG_SS_INACTIVE	(DWC3_DCTL_ULSTCHNGREQ(6))
+#define DWC3_DCTL_ULSTCHNG_RECOVERY	(DWC3_DCTL_ULSTCHNGREQ(8))
+#define DWC3_DCTL_ULSTCHNG_COMPLIANCE	(DWC3_DCTL_ULSTCHNGREQ(10))
+#define DWC3_DCTL_ULSTCHNG_LOOPBACK	(DWC3_DCTL_ULSTCHNGREQ(11))
+
+/* Device Event Enable Register */
+#define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN	(1 << 12)
+#define DWC3_DEVTEN_EVNTOVERFLOWEN	(1 << 11)
+#define DWC3_DEVTEN_CMDCMPLTEN		(1 << 10)
+#define DWC3_DEVTEN_ERRTICERREN		(1 << 9)
+#define DWC3_DEVTEN_SOFEN		(1 << 7)
+#define DWC3_DEVTEN_EOPFEN		(1 << 6)
+#define DWC3_DEVTEN_WKUPEVTEN		(1 << 4)
+#define DWC3_DEVTEN_ULSTCNGEN		(1 << 3)
+#define DWC3_DEVTEN_CONNECTDONEEN	(1 << 2)
+#define DWC3_DEVTEN_USBRSTEN		(1 << 1)
+#define DWC3_DEVTEN_DISCONNEVTEN	(1 << 0)
+
+/* Device Status Register */
+#define DWC3_DSTS_PWRUPREQ		(1 << 24)
+#define DWC3_DSTS_COREIDLE		(1 << 23)
+#define DWC3_DSTS_DEVCTRLHLT		(1 << 22)
+
+#define DWC3_DSTS_USBLNKST_MASK		(0x0f << 18)
+#define DWC3_DSTS_USBLNKST(n)		(((n) & DWC3_DSTS_USBLNKST_MASK) >> 18)
+
+#define DWC3_DSTS_RXFIFOEMPTY		(1 << 17)
+
+#define DWC3_DSTS_SOFFN_MASK		(0x3ff << 3)
+#define DWC3_DSTS_SOFFN(n)		(((n) & DWC3_DSTS_SOFFN_MASK) >> 3)
+
+#define DWC3_DSTS_CONNECTSPD		(7 << 0)
+
+#define DWC3_DSTS_SUPERSPEED		(4 << 0)
+#define DWC3_DSTS_HIGHSPEED		(0 << 0)
+#define DWC3_DSTS_FULLSPEED2		(1 << 0)
+#define DWC3_DSTS_LOWSPEED		(2 << 0)
+#define DWC3_DSTS_FULLSPEED1		(3 << 0)
+
+/* Device Generic Command Register */
+#define DWC3_DGCMD_SET_LMP		0x01
+#define DWC3_DGCMD_SET_PERIODIC_PAR	0x02
+#define DWC3_DGCMD_XMIT_FUNCTION	0x03
+#define DWC3_DGCMD_SELECTED_FIFO_FLUSH	0x09
+#define DWC3_DGCMD_ALL_FIFO_FLUSH	0x0a
+#define DWC3_DGCMD_SET_ENDPOINT_NRDY	0x0c
+#define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK	0x10
+
+/* Device Endpoint Command Register */
+#define DWC3_DEPCMD_PARAM_SHIFT		16
+#define DWC3_DEPCMD_PARAM(x)		(x << DWC3_DEPCMD_PARAM_SHIFT)
+#define DWC3_DEPCMD_GET_RSC_IDX(x)	((x >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
+#define DWC3_DEPCMD_STATUS_MASK		(0x0f << 12)
+#define DWC3_DEPCMD_STATUS(x)		((x & DWC3_DEPCMD_STATUS_MASK) >> 12)
+#define DWC3_DEPCMD_HIPRI_FORCERM	(1 << 11)
+#define DWC3_DEPCMD_CMDACT		(1 << 10)
+#define DWC3_DEPCMD_CMDIOC		(1 << 8)
+
+#define DWC3_DEPCMD_DEPSTARTCFG		(0x09 << 0)
+#define DWC3_DEPCMD_ENDTRANSFER		(0x08 << 0)
+#define DWC3_DEPCMD_UPDATETRANSFER	(0x07 << 0)
+#define DWC3_DEPCMD_STARTTRANSFER	(0x06 << 0)
+#define DWC3_DEPCMD_CLEARSTALL		(0x05 << 0)
+#define DWC3_DEPCMD_SETSTALL		(0x04 << 0)
+#define DWC3_DEPCMD_GETSEQNUMBER	(0x03 << 0)
+#define DWC3_DEPCMD_SETTRANSFRESOURCE	(0x02 << 0)
+#define DWC3_DEPCMD_SETEPCONFIG		(0x01 << 0)
+
+/* The EP number goes 0..31 so ep0 is always out and ep1 is always in */
+#define DWC3_DALEPENA_EP(n)		(1 << n)
+
+#define DWC3_DEPCMD_TYPE_CONTROL	0
+#define DWC3_DEPCMD_TYPE_ISOC		1
+#define DWC3_DEPCMD_TYPE_BULK		2
+#define DWC3_DEPCMD_TYPE_INTR		3
+
+/* Structures */
+
+struct dwc3_trb_hw;
+
+/**
+ * struct dwc3_event_buffer - Software event buffer representation
+ * @list: a list of event buffers
+ * @buf: _THE_ buffer
+ * @length: size of this buffer
+ * @dma: dma_addr_t
+ * @dwc: pointer to DWC controller
+ */
+struct dwc3_event_buffer {
+	void			*buf;
+	unsigned		length;
+	unsigned int		lpos;
+
+	dma_addr_t		dma;
+
+	struct dwc3		*dwc;
+};
+
+#define DWC3_EP_FLAG_STALLED	(1 << 0)
+#define DWC3_EP_FLAG_WEDGED	(1 << 1)
+
+#define DWC3_EP_DIRECTION_TX	true
+#define DWC3_EP_DIRECTION_RX	false
+
+#define DWC3_TRB_NUM		32
+#define DWC3_TRB_MASK		(DWC3_TRB_NUM - 1)
+
+/**
+ * struct dwc3_ep - device side endpoint representation
+ * @endpoint: usb endpoint
+ * @request_list: list of requests for this endpoint
+ * @req_queued: list of requests on this ep which have TRBs setup
+ * @trb_pool: array of transaction buffers
+ * @trb_pool_dma: dma address of @trb_pool
+ * @free_slot: next slot which is going to be used
+ * @busy_slot: first slot which is owned by HW
+ * @desc: usb_endpoint_descriptor pointer
+ * @dwc: pointer to DWC controller
+ * @flags: endpoint flags (wedged, stalled, ...)
+ * @current_trb: index of current used trb
+ * @number: endpoint number (1 - 15)
+ * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK
+ * @res_trans_idx: Resource transfer index
+ * @interval: the intervall on which the ISOC transfer is started
+ * @name: a human readable name e.g. ep1out-bulk
+ * @direction: true for TX, false for RX
+ */
+struct dwc3_ep {
+	struct usb_ep		endpoint;
+	struct list_head	request_list;
+	struct list_head	req_queued;
+
+	struct dwc3_trb_hw	*trb_pool;
+	dma_addr_t		trb_pool_dma;
+	u32			free_slot;
+	u32			busy_slot;
+	const struct usb_endpoint_descriptor *desc;
+	struct dwc3		*dwc;
+
+	unsigned		flags;
+#define DWC3_EP_ENABLED		(1 << 0)
+#define DWC3_EP_STALL		(1 << 1)
+#define DWC3_EP_WEDGE		(1 << 2)
+#define DWC3_EP_BUSY		(1 << 4)
+#define DWC3_EP_PENDING_REQUEST	(1 << 5)
+#define DWC3_EP_WILL_SHUTDOWN	(1 << 6)
+
+	unsigned		current_trb;
+
+	u8			number;
+	u8			type;
+	u8			res_trans_idx;
+	u32			interval;
+
+	char			name[20];
+
+	unsigned		direction:1;
+};
+
+enum dwc3_phy {
+	DWC3_PHY_UNKNOWN = 0,
+	DWC3_PHY_USB3,
+	DWC3_PHY_USB2,
+};
+
+enum dwc3_ep0_state {
+	EP0_UNCONNECTED		= 0,
+	EP0_IDLE,
+	EP0_IN_DATA_PHASE,
+	EP0_OUT_DATA_PHASE,
+	EP0_IN_WAIT_GADGET,
+	EP0_OUT_WAIT_GADGET,
+	EP0_IN_WAIT_NRDY,
+	EP0_OUT_WAIT_NRDY,
+	EP0_IN_STATUS_PHASE,
+	EP0_OUT_STATUS_PHASE,
+	EP0_STALL,
+};
+
+enum dwc3_link_state {
+	/* In SuperSpeed */
+	DWC3_LINK_STATE_U0		= 0x00, /* in HS, means ON */
+	DWC3_LINK_STATE_U1		= 0x01,
+	DWC3_LINK_STATE_U2		= 0x02, /* in HS, means SLEEP */
+	DWC3_LINK_STATE_U3		= 0x03, /* in HS, means SUSPEND */
+	DWC3_LINK_STATE_SS_DIS		= 0x04,
+	DWC3_LINK_STATE_RX_DET		= 0x05, /* in HS, means Early Suspend */
+	DWC3_LINK_STATE_SS_INACT	= 0x06,
+	DWC3_LINK_STATE_POLL		= 0x07,
+	DWC3_LINK_STATE_RECOV		= 0x08,
+	DWC3_LINK_STATE_HRESET		= 0x09,
+	DWC3_LINK_STATE_CMPLY		= 0x0a,
+	DWC3_LINK_STATE_LPBK		= 0x0b,
+	DWC3_LINK_STATE_MASK		= 0x0f,
+};
+
+enum dwc3_device_state {
+	DWC3_DEFAULT_STATE,
+	DWC3_ADDRESS_STATE,
+	DWC3_CONFIGURED_STATE,
+};
+
+/**
+ * struct dwc3_trb - transfer request block
+ * @bpl: lower 32bit of the buffer
+ * @bph: higher 32bit of the buffer
+ * @length: buffer size (up to 16mb - 1)
+ * @pcm1: packet count m1
+ * @trbsts: trb status
+ *	0 = ok
+ *	1 = missed isoc
+ *	2 = setup pending
+ * @hwo: hardware owner of descriptor
+ * @lst: last trb
+ * @chn: chain buffers
+ * @csp: continue on short packets (only supported on isoc eps)
+ * @trbctl: trb control
+ *	1 = normal
+ *	2 = control-setup
+ *	3 = control-status-2
+ *	4 = control-status-3
+ *	5 = control-data (first trb of data stage)
+ *	6 = isochronous-first (first trb of service interval)
+ *	7 = isochronous
+ *	8 = link trb
+ *	others = reserved
+ * @isp_imi: interrupt on short packet / interrupt on missed isoc
+ * @ioc: interrupt on complete
+ * @sid_sofn: Stream ID / SOF Number
+ */
+struct dwc3_trb {
+	u64             bplh;
+
+	union {
+		struct {
+			u32             length:24;
+			u32             pcm1:2;
+			u32             reserved27_26:2;
+			u32             trbsts:4;
+#define DWC3_TRB_STS_OKAY                       0
+#define DWC3_TRB_STS_MISSED_ISOC                1
+#define DWC3_TRB_STS_SETUP_PENDING              2
+		};
+		u32 len_pcm;
+	};
+
+	union {
+		struct {
+			u32             hwo:1;
+			u32             lst:1;
+			u32             chn:1;
+			u32             csp:1;
+			u32             trbctl:6;
+			u32             isp_imi:1;
+			u32             ioc:1;
+			u32             reserved13_12:2;
+			u32             sid_sofn:16;
+			u32             reserved31_30:2;
+		};
+		u32 control;
+	};
+} __packed;
+
+/**
+ * struct dwc3_trb_hw - transfer request block (hw format)
+ * @bpl: DW0-3
+ * @bph: DW4-7
+ * @size: DW8-B
+ * @trl: DWC-F
+ */
+struct dwc3_trb_hw {
+	__le32		bpl;
+	__le32		bph;
+	__le32		size;
+	__le32		ctrl;
+} __packed;
+
+static inline void dwc3_trb_to_hw(struct dwc3_trb *nat, struct dwc3_trb_hw *hw)
+{
+	hw->bpl = cpu_to_le32(lower_32_bits(nat->bplh));
+	hw->bph = cpu_to_le32(upper_32_bits(nat->bplh));
+	hw->size = cpu_to_le32p(&nat->len_pcm);
+	/* HWO is written last */
+	hw->ctrl = cpu_to_le32p(&nat->control);
+}
+
+static inline void dwc3_trb_to_nat(struct dwc3_trb_hw *hw, struct dwc3_trb *nat)
+{
+	u64 bplh;
+
+	bplh = le32_to_cpup(&hw->bpl);
+	bplh |= (u64) le32_to_cpup(&hw->bph) << 32;
+	nat->bplh = bplh;
+
+	nat->len_pcm = le32_to_cpup(&hw->size);
+	nat->control = le32_to_cpup(&hw->ctrl);
+}
+
+/**
+ * struct dwc3 - representation of our controller
+ * ctrl_req: usb control request which is used for ep0
+ * ep0_trb: trb which is used for the ctrl_req
+ * setup_buf: used while precessing STD USB requests
+ * ctrl_req_addr: dma address of ctrl_req
+ * ep0_trb: dma address of ep0_trb
+ * ep0_usb_req: dummy req used while handling STD USB requests
+ * setup_buf_addr: dma address of setup_buf
+ * @lock: for synchronizing
+ * @dev: pointer to our struct device
+ * @event_buffer_list: a list of event buffers
+ * @gadget: device side representation of the peripheral controller
+ * @gadget_driver: pointer to the gadget driver
+ * @regs: base address for our registers
+ * @regs_size: address space size
+ * @irq: IRQ number
+ * @revision: revision register contents
+ * @is_selfpowered: true when we are selfpowered
+ * @three_stage_setup: set if we perform a three phase setup
+ * @ep0_status_pending: ep0 status response without a req is pending
+ * @ep0state: state of endpoint zero
+ * @link_state: link state
+ * @speed: device speed (super, high, full, low)
+ * @mem: points to start of memory which is used for this struct.
+ * @root: debugfs root folder pointer
+ */
+struct dwc3 {
+	struct usb_ctrlrequest	*ctrl_req;
+	struct dwc3_trb_hw	*ep0_trb;
+	u8			*setup_buf;
+	dma_addr_t		ctrl_req_addr;
+	dma_addr_t		ep0_trb_addr;
+	dma_addr_t		setup_buf_addr;
+	struct usb_request	ep0_usb_req;
+	/* device lock */
+	spinlock_t		lock;
+	struct device		*dev;
+
+	struct dwc3_event_buffer *ev_buffs[DWC3_EVENT_BUFFERS_NUM];
+	struct dwc3_ep		*eps[DWC3_ENDPOINTS_NUM];
+
+	struct usb_gadget	gadget;
+	struct usb_gadget_driver *gadget_driver;
+
+	void __iomem		*regs;
+	size_t			regs_size;
+
+	int			irq;
+
+	u32			revision;
+
+#define DWC3_REVISION_173A	0x5533173a
+#define DWC3_REVISION_175A	0x5533175a
+#define DWC3_REVISION_180A	0x5533180a
+#define DWC3_REVISION_183A	0x5533183a
+#define DWC3_REVISION_185A	0x5533185a
+#define DWC3_REVISION_188A	0x5533188a
+#define DWC3_REVISION_190A	0x5533190a
+
+	unsigned		is_selfpowered:1;
+	unsigned		three_stage_setup:1;
+	unsigned		ep0_status_pending:1;
+
+	enum dwc3_ep0_state	ep0state;
+	enum dwc3_link_state	link_state;
+	enum dwc3_device_state	dev_state;
+
+	u8			speed;
+	void			*mem;
+
+	struct dentry		*root;
+};
+
+/* -------------------------------------------------------------------------- */
+
+#define DWC3_TRBSTS_OK			0
+#define DWC3_TRBSTS_MISSED_ISOC		1
+#define DWC3_TRBSTS_SETUP_PENDING	2
+
+#define DWC3_TRBCTL_NORMAL		1
+#define DWC3_TRBCTL_CONTROL_SETUP	2
+#define DWC3_TRBCTL_CONTROL_STATUS2	3
+#define DWC3_TRBCTL_CONTROL_STATUS3	4
+#define DWC3_TRBCTL_CONTROL_DATA	5
+#define DWC3_TRBCTL_ISOCHRONOUS_FIRST	6
+#define DWC3_TRBCTL_ISOCHRONOUS		7
+#define DWC3_TRBCTL_LINK_TRB		8
+
+/* -------------------------------------------------------------------------- */
+
+struct dwc3_event_type {
+	u32	is_devspec:1;
+	u32	type:6;
+	u32	reserved8_31:25;
+} __packed;
+
+#define DWC3_DEPEVT_XFERCOMPLETE	0x01
+#define DWC3_DEPEVT_XFERINPROGRESS	0x02
+#define DWC3_DEPEVT_XFERNOTREADY	0x03
+#define DWC3_DEPEVT_RXTXFIFOEVT		0x04
+#define DWC3_DEPEVT_STREAMEVT		0x06
+#define DWC3_DEPEVT_EPCMDCMPLT		0x07
+
+/**
+ * struct dwc3_event_depvt - Device Endpoint Events
+ * @one_bit: indicates this is an endpoint event (not used)
+ * @endpoint_number: number of the endpoint
+ * @endpoint_event: The event we have:
+ *	0x00	- Reserved
+ *	0x01	- XferComplete
+ *	0x02	- XferInProgress
+ *	0x03	- XferNotReady
+ *	0x04	- RxTxFifoEvt (IN->Underrun, OUT->Overrun)
+ *	0x05	- Reserved
+ *	0x06	- StreamEvt
+ *	0x07	- EPCmdCmplt
+ * @reserved11_10: Reserved, don't use.
+ * @status: Indicates the status of the event. Refer to databook for
+ *	more information.
+ * @parameters: Parameters of the current event. Refer to databook for
+ *	more information.
+ */
+struct dwc3_event_depevt {
+	u32	one_bit:1;
+	u32	endpoint_number:5;
+	u32	endpoint_event:4;
+	u32	reserved11_10:2;
+	u32	status:4;
+#define DEPEVT_STATUS_BUSERR    (1 << 0)
+#define DEPEVT_STATUS_SHORT     (1 << 1)
+#define DEPEVT_STATUS_IOC       (1 << 2)
+#define DEPEVT_STATUS_LST	(1 << 3)
+	u32	parameters:16;
+} __packed;
+
+/**
+ * struct dwc3_event_devt - Device Events
+ * @one_bit: indicates this is a non-endpoint event (not used)
+ * @device_event: indicates it's a device event. Should read as 0x00
+ * @type: indicates the type of device event.
+ *	0	- DisconnEvt
+ *	1	- USBRst
+ *	2	- ConnectDone
+ *	3	- ULStChng
+ *	4	- WkUpEvt
+ *	5	- Reserved
+ *	6	- EOPF
+ *	7	- SOF
+ *	8	- Reserved
+ *	9	- ErrticErr
+ *	10	- CmdCmplt
+ *	11	- EvntOverflow
+ *	12	- VndrDevTstRcved
+ * @reserved15_12: Reserved, not used
+ * @event_info: Information about this event
+ * @reserved31_24: Reserved, not used
+ */
+struct dwc3_event_devt {
+	u32	one_bit:1;
+	u32	device_event:7;
+	u32	type:4;
+	u32	reserved15_12:4;
+	u32	event_info:8;
+	u32	reserved31_24:8;
+} __packed;
+
+/**
+ * struct dwc3_event_gevt - Other Core Events
+ * @one_bit: indicates this is a non-endpoint event (not used)
+ * @device_event: indicates it's (0x03) Carkit or (0x04) I2C event.
+ * @phy_port_number: self-explanatory
+ * @reserved31_12: Reserved, not used.
+ */
+struct dwc3_event_gevt {
+	u32	one_bit:1;
+	u32	device_event:7;
+	u32	phy_port_number:4;
+	u32	reserved31_12:20;
+} __packed;
+
+/**
+ * union dwc3_event - representation of Event Buffer contents
+ * @raw: raw 32-bit event
+ * @type: the type of the event
+ * @depevt: Device Endpoint Event
+ * @devt: Device Event
+ * @gevt: Global Event
+ */
+union dwc3_event {
+	u32				raw;
+	struct dwc3_event_type		type;
+	struct dwc3_event_depevt	depevt;
+	struct dwc3_event_devt		devt;
+	struct dwc3_event_gevt		gevt;
+};
+
+/*
+ * DWC3 Features to be used as Driver Data
+ */
+
+#define DWC3_HAS_PERIPHERAL		BIT(0)
+#define DWC3_HAS_XHCI			BIT(1)
+#define DWC3_HAS_OTG			BIT(3)
+
+#endif /* __DRIVERS_USB_DWC3_CORE_H */
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
new file mode 100644
index 000000000000..ee3ba7346765
--- /dev/null
+++ b/drivers/usb/dwc3/debug.h
@@ -0,0 +1,51 @@
+/**
+ * debug.h - DesignWare USB3 DRD Controller Debug Header
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "core.h"
+
+#ifdef CONFIG_DEBUG_FS
+extern int dwc3_debugfs_init(struct dwc3 *);
+extern void dwc3_debugfs_exit(struct dwc3 *);
+#else
+static inline int dwc3_debugfs_init(struct dwc3 *d)
+{  return 0;  }
+static inline void dwc3_debugfs_exit(struct dwc3 *d)
+{  }
+#endif
+
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
new file mode 100644
index 000000000000..432df5393720
--- /dev/null
+++ b/drivers/usb/dwc3/debugfs.c
@@ -0,0 +1,534 @@
+/**
+ * debugfs.c - DesignWare USB3 DRD Controller DebugFS file
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/ptrace.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+
+#include <asm/uaccess.h>
+
+#include "core.h"
+#include "gadget.h"
+#include "io.h"
+
+struct dwc3_register {
+	const char	*name;
+	u32		offset;
+};
+
+#define dump_register(nm)				\
+{							\
+	.name	= __stringify(nm),			\
+	.offset	= DWC3_ ##nm,				\
+}
+
+static const struct dwc3_register dwc3_regs[] = {
+	dump_register(GSBUSCFG0),
+	dump_register(GSBUSCFG1),
+	dump_register(GTXTHRCFG),
+	dump_register(GRXTHRCFG),
+	dump_register(GCTL),
+	dump_register(GEVTEN),
+	dump_register(GSTS),
+	dump_register(GSNPSID),
+	dump_register(GGPIO),
+	dump_register(GUID),
+	dump_register(GUCTL),
+	dump_register(GBUSERRADDR0),
+	dump_register(GBUSERRADDR1),
+	dump_register(GPRTBIMAP0),
+	dump_register(GPRTBIMAP1),
+	dump_register(GHWPARAMS0),
+	dump_register(GHWPARAMS1),
+	dump_register(GHWPARAMS2),
+	dump_register(GHWPARAMS3),
+	dump_register(GHWPARAMS4),
+	dump_register(GHWPARAMS5),
+	dump_register(GHWPARAMS6),
+	dump_register(GHWPARAMS7),
+	dump_register(GDBGFIFOSPACE),
+	dump_register(GDBGLTSSM),
+	dump_register(GPRTBIMAP_HS0),
+	dump_register(GPRTBIMAP_HS1),
+	dump_register(GPRTBIMAP_FS0),
+	dump_register(GPRTBIMAP_FS1),
+
+	dump_register(GUSB2PHYCFG(0)),
+	dump_register(GUSB2PHYCFG(1)),
+	dump_register(GUSB2PHYCFG(2)),
+	dump_register(GUSB2PHYCFG(3)),
+	dump_register(GUSB2PHYCFG(4)),
+	dump_register(GUSB2PHYCFG(5)),
+	dump_register(GUSB2PHYCFG(6)),
+	dump_register(GUSB2PHYCFG(7)),
+	dump_register(GUSB2PHYCFG(8)),
+	dump_register(GUSB2PHYCFG(9)),
+	dump_register(GUSB2PHYCFG(10)),
+	dump_register(GUSB2PHYCFG(11)),
+	dump_register(GUSB2PHYCFG(12)),
+	dump_register(GUSB2PHYCFG(13)),
+	dump_register(GUSB2PHYCFG(14)),
+	dump_register(GUSB2PHYCFG(15)),
+
+	dump_register(GUSB2I2CCTL(0)),
+	dump_register(GUSB2I2CCTL(1)),
+	dump_register(GUSB2I2CCTL(2)),
+	dump_register(GUSB2I2CCTL(3)),
+	dump_register(GUSB2I2CCTL(4)),
+	dump_register(GUSB2I2CCTL(5)),
+	dump_register(GUSB2I2CCTL(6)),
+	dump_register(GUSB2I2CCTL(7)),
+	dump_register(GUSB2I2CCTL(8)),
+	dump_register(GUSB2I2CCTL(9)),
+	dump_register(GUSB2I2CCTL(10)),
+	dump_register(GUSB2I2CCTL(11)),
+	dump_register(GUSB2I2CCTL(12)),
+	dump_register(GUSB2I2CCTL(13)),
+	dump_register(GUSB2I2CCTL(14)),
+	dump_register(GUSB2I2CCTL(15)),
+
+	dump_register(GUSB2PHYACC(0)),
+	dump_register(GUSB2PHYACC(1)),
+	dump_register(GUSB2PHYACC(2)),
+	dump_register(GUSB2PHYACC(3)),
+	dump_register(GUSB2PHYACC(4)),
+	dump_register(GUSB2PHYACC(5)),
+	dump_register(GUSB2PHYACC(6)),
+	dump_register(GUSB2PHYACC(7)),
+	dump_register(GUSB2PHYACC(8)),
+	dump_register(GUSB2PHYACC(9)),
+	dump_register(GUSB2PHYACC(10)),
+	dump_register(GUSB2PHYACC(11)),
+	dump_register(GUSB2PHYACC(12)),
+	dump_register(GUSB2PHYACC(13)),
+	dump_register(GUSB2PHYACC(14)),
+	dump_register(GUSB2PHYACC(15)),
+
+	dump_register(GUSB3PIPECTL(0)),
+	dump_register(GUSB3PIPECTL(1)),
+	dump_register(GUSB3PIPECTL(2)),
+	dump_register(GUSB3PIPECTL(3)),
+	dump_register(GUSB3PIPECTL(4)),
+	dump_register(GUSB3PIPECTL(5)),
+	dump_register(GUSB3PIPECTL(6)),
+	dump_register(GUSB3PIPECTL(7)),
+	dump_register(GUSB3PIPECTL(8)),
+	dump_register(GUSB3PIPECTL(9)),
+	dump_register(GUSB3PIPECTL(10)),
+	dump_register(GUSB3PIPECTL(11)),
+	dump_register(GUSB3PIPECTL(12)),
+	dump_register(GUSB3PIPECTL(13)),
+	dump_register(GUSB3PIPECTL(14)),
+	dump_register(GUSB3PIPECTL(15)),
+
+	dump_register(GTXFIFOSIZ(0)),
+	dump_register(GTXFIFOSIZ(1)),
+	dump_register(GTXFIFOSIZ(2)),
+	dump_register(GTXFIFOSIZ(3)),
+	dump_register(GTXFIFOSIZ(4)),
+	dump_register(GTXFIFOSIZ(5)),
+	dump_register(GTXFIFOSIZ(6)),
+	dump_register(GTXFIFOSIZ(7)),
+	dump_register(GTXFIFOSIZ(8)),
+	dump_register(GTXFIFOSIZ(9)),
+	dump_register(GTXFIFOSIZ(10)),
+	dump_register(GTXFIFOSIZ(11)),
+	dump_register(GTXFIFOSIZ(12)),
+	dump_register(GTXFIFOSIZ(13)),
+	dump_register(GTXFIFOSIZ(14)),
+	dump_register(GTXFIFOSIZ(15)),
+	dump_register(GTXFIFOSIZ(16)),
+	dump_register(GTXFIFOSIZ(17)),
+	dump_register(GTXFIFOSIZ(18)),
+	dump_register(GTXFIFOSIZ(19)),
+	dump_register(GTXFIFOSIZ(20)),
+	dump_register(GTXFIFOSIZ(21)),
+	dump_register(GTXFIFOSIZ(22)),
+	dump_register(GTXFIFOSIZ(23)),
+	dump_register(GTXFIFOSIZ(24)),
+	dump_register(GTXFIFOSIZ(25)),
+	dump_register(GTXFIFOSIZ(26)),
+	dump_register(GTXFIFOSIZ(27)),
+	dump_register(GTXFIFOSIZ(28)),
+	dump_register(GTXFIFOSIZ(29)),
+	dump_register(GTXFIFOSIZ(30)),
+	dump_register(GTXFIFOSIZ(31)),
+
+	dump_register(GRXFIFOSIZ(0)),
+	dump_register(GRXFIFOSIZ(1)),
+	dump_register(GRXFIFOSIZ(2)),
+	dump_register(GRXFIFOSIZ(3)),
+	dump_register(GRXFIFOSIZ(4)),
+	dump_register(GRXFIFOSIZ(5)),
+	dump_register(GRXFIFOSIZ(6)),
+	dump_register(GRXFIFOSIZ(7)),
+	dump_register(GRXFIFOSIZ(8)),
+	dump_register(GRXFIFOSIZ(9)),
+	dump_register(GRXFIFOSIZ(10)),
+	dump_register(GRXFIFOSIZ(11)),
+	dump_register(GRXFIFOSIZ(12)),
+	dump_register(GRXFIFOSIZ(13)),
+	dump_register(GRXFIFOSIZ(14)),
+	dump_register(GRXFIFOSIZ(15)),
+	dump_register(GRXFIFOSIZ(16)),
+	dump_register(GRXFIFOSIZ(17)),
+	dump_register(GRXFIFOSIZ(18)),
+	dump_register(GRXFIFOSIZ(19)),
+	dump_register(GRXFIFOSIZ(20)),
+	dump_register(GRXFIFOSIZ(21)),
+	dump_register(GRXFIFOSIZ(22)),
+	dump_register(GRXFIFOSIZ(23)),
+	dump_register(GRXFIFOSIZ(24)),
+	dump_register(GRXFIFOSIZ(25)),
+	dump_register(GRXFIFOSIZ(26)),
+	dump_register(GRXFIFOSIZ(27)),
+	dump_register(GRXFIFOSIZ(28)),
+	dump_register(GRXFIFOSIZ(29)),
+	dump_register(GRXFIFOSIZ(30)),
+	dump_register(GRXFIFOSIZ(31)),
+
+	dump_register(GEVNTADRLO(0)),
+	dump_register(GEVNTADRHI(0)),
+	dump_register(GEVNTSIZ(0)),
+	dump_register(GEVNTCOUNT(0)),
+
+	dump_register(GHWPARAMS8),
+	dump_register(DCFG),
+	dump_register(DCTL),
+	dump_register(DEVTEN),
+	dump_register(DSTS),
+	dump_register(DGCMDPAR),
+	dump_register(DGCMD),
+	dump_register(DALEPENA),
+
+	dump_register(DEPCMDPAR2(0)),
+	dump_register(DEPCMDPAR2(1)),
+	dump_register(DEPCMDPAR2(2)),
+	dump_register(DEPCMDPAR2(3)),
+	dump_register(DEPCMDPAR2(4)),
+	dump_register(DEPCMDPAR2(5)),
+	dump_register(DEPCMDPAR2(6)),
+	dump_register(DEPCMDPAR2(7)),
+	dump_register(DEPCMDPAR2(8)),
+	dump_register(DEPCMDPAR2(9)),
+	dump_register(DEPCMDPAR2(10)),
+	dump_register(DEPCMDPAR2(11)),
+	dump_register(DEPCMDPAR2(12)),
+	dump_register(DEPCMDPAR2(13)),
+	dump_register(DEPCMDPAR2(14)),
+	dump_register(DEPCMDPAR2(15)),
+	dump_register(DEPCMDPAR2(16)),
+	dump_register(DEPCMDPAR2(17)),
+	dump_register(DEPCMDPAR2(18)),
+	dump_register(DEPCMDPAR2(19)),
+	dump_register(DEPCMDPAR2(20)),
+	dump_register(DEPCMDPAR2(21)),
+	dump_register(DEPCMDPAR2(22)),
+	dump_register(DEPCMDPAR2(23)),
+	dump_register(DEPCMDPAR2(24)),
+	dump_register(DEPCMDPAR2(25)),
+	dump_register(DEPCMDPAR2(26)),
+	dump_register(DEPCMDPAR2(27)),
+	dump_register(DEPCMDPAR2(28)),
+	dump_register(DEPCMDPAR2(29)),
+	dump_register(DEPCMDPAR2(30)),
+	dump_register(DEPCMDPAR2(31)),
+
+	dump_register(DEPCMDPAR1(0)),
+	dump_register(DEPCMDPAR1(1)),
+	dump_register(DEPCMDPAR1(2)),
+	dump_register(DEPCMDPAR1(3)),
+	dump_register(DEPCMDPAR1(4)),
+	dump_register(DEPCMDPAR1(5)),
+	dump_register(DEPCMDPAR1(6)),
+	dump_register(DEPCMDPAR1(7)),
+	dump_register(DEPCMDPAR1(8)),
+	dump_register(DEPCMDPAR1(9)),
+	dump_register(DEPCMDPAR1(10)),
+	dump_register(DEPCMDPAR1(11)),
+	dump_register(DEPCMDPAR1(12)),
+	dump_register(DEPCMDPAR1(13)),
+	dump_register(DEPCMDPAR1(14)),
+	dump_register(DEPCMDPAR1(15)),
+	dump_register(DEPCMDPAR1(16)),
+	dump_register(DEPCMDPAR1(17)),
+	dump_register(DEPCMDPAR1(18)),
+	dump_register(DEPCMDPAR1(19)),
+	dump_register(DEPCMDPAR1(20)),
+	dump_register(DEPCMDPAR1(21)),
+	dump_register(DEPCMDPAR1(22)),
+	dump_register(DEPCMDPAR1(23)),
+	dump_register(DEPCMDPAR1(24)),
+	dump_register(DEPCMDPAR1(25)),
+	dump_register(DEPCMDPAR1(26)),
+	dump_register(DEPCMDPAR1(27)),
+	dump_register(DEPCMDPAR1(28)),
+	dump_register(DEPCMDPAR1(29)),
+	dump_register(DEPCMDPAR1(30)),
+	dump_register(DEPCMDPAR1(31)),
+
+	dump_register(DEPCMDPAR0(0)),
+	dump_register(DEPCMDPAR0(1)),
+	dump_register(DEPCMDPAR0(2)),
+	dump_register(DEPCMDPAR0(3)),
+	dump_register(DEPCMDPAR0(4)),
+	dump_register(DEPCMDPAR0(5)),
+	dump_register(DEPCMDPAR0(6)),
+	dump_register(DEPCMDPAR0(7)),
+	dump_register(DEPCMDPAR0(8)),
+	dump_register(DEPCMDPAR0(9)),
+	dump_register(DEPCMDPAR0(10)),
+	dump_register(DEPCMDPAR0(11)),
+	dump_register(DEPCMDPAR0(12)),
+	dump_register(DEPCMDPAR0(13)),
+	dump_register(DEPCMDPAR0(14)),
+	dump_register(DEPCMDPAR0(15)),
+	dump_register(DEPCMDPAR0(16)),
+	dump_register(DEPCMDPAR0(17)),
+	dump_register(DEPCMDPAR0(18)),
+	dump_register(DEPCMDPAR0(19)),
+	dump_register(DEPCMDPAR0(20)),
+	dump_register(DEPCMDPAR0(21)),
+	dump_register(DEPCMDPAR0(22)),
+	dump_register(DEPCMDPAR0(23)),
+	dump_register(DEPCMDPAR0(24)),
+	dump_register(DEPCMDPAR0(25)),
+	dump_register(DEPCMDPAR0(26)),
+	dump_register(DEPCMDPAR0(27)),
+	dump_register(DEPCMDPAR0(28)),
+	dump_register(DEPCMDPAR0(29)),
+	dump_register(DEPCMDPAR0(30)),
+	dump_register(DEPCMDPAR0(31)),
+
+	dump_register(DEPCMD(0)),
+	dump_register(DEPCMD(1)),
+	dump_register(DEPCMD(2)),
+	dump_register(DEPCMD(3)),
+	dump_register(DEPCMD(4)),
+	dump_register(DEPCMD(5)),
+	dump_register(DEPCMD(6)),
+	dump_register(DEPCMD(7)),
+	dump_register(DEPCMD(8)),
+	dump_register(DEPCMD(9)),
+	dump_register(DEPCMD(10)),
+	dump_register(DEPCMD(11)),
+	dump_register(DEPCMD(12)),
+	dump_register(DEPCMD(13)),
+	dump_register(DEPCMD(14)),
+	dump_register(DEPCMD(15)),
+	dump_register(DEPCMD(16)),
+	dump_register(DEPCMD(17)),
+	dump_register(DEPCMD(18)),
+	dump_register(DEPCMD(19)),
+	dump_register(DEPCMD(20)),
+	dump_register(DEPCMD(21)),
+	dump_register(DEPCMD(22)),
+	dump_register(DEPCMD(23)),
+	dump_register(DEPCMD(24)),
+	dump_register(DEPCMD(25)),
+	dump_register(DEPCMD(26)),
+	dump_register(DEPCMD(27)),
+	dump_register(DEPCMD(28)),
+	dump_register(DEPCMD(29)),
+	dump_register(DEPCMD(30)),
+	dump_register(DEPCMD(31)),
+
+	dump_register(OCFG),
+	dump_register(OCTL),
+	dump_register(OEVTEN),
+	dump_register(OSTS),
+};
+
+static int dwc3_regdump_show(struct seq_file *s, void *unused)
+{
+	struct dwc3		*dwc = s->private;
+	int			i;
+
+	seq_printf(s, "DesignWare USB3 Core Register Dump\n");
+
+	for (i = 0; i < ARRAY_SIZE(dwc3_regs); i++) {
+		seq_printf(s, "%-20s :    %08x\n", dwc3_regs[i].name,
+				dwc3_readl(dwc->regs, dwc3_regs[i].offset));
+	}
+
+	return 0;
+}
+
+static int dwc3_regdump_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dwc3_regdump_show, inode->i_private);
+}
+
+static const struct file_operations dwc3_regdump_fops = {
+	.open			= dwc3_regdump_open,
+	.read			= seq_read,
+	.release		= single_release,
+};
+
+
+static int dwc3_send_testmode_cmd(struct dwc3 *dwc, int mode)
+{
+	u32 timeout = 250;
+
+	dwc3_writel(dwc->regs, DWC3_DGCMDPAR, mode);
+	dwc3_writel(dwc->regs, DWC3_DGCMD, DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK |
+			DWC3_DEPCMD_CMDACT);
+	do {
+		u32 reg;
+
+		reg = dwc3_readl(dwc->regs, DWC3_DGCMD);
+		if (!(reg & DWC3_DEPCMD_CMDACT))
+			return 0;
+		timeout--;
+		if (!timeout)
+			return -ETIMEDOUT;
+		mdelay(1);
+	} while (1);
+}
+
+static struct dwc3_trb_hw trb_0 __aligned(16);
+static struct dwc3_trb_hw trb_1 __aligned(16);
+
+#define BUF_SIZE	4096
+static int dwc3_testmode_open(struct inode *inode, struct file *file)
+{
+	struct dwc3 *dwc = inode->i_private;
+	struct dwc3_gadget_ep_cmd_params par0;
+	struct dwc3_gadget_ep_cmd_params par1;
+	struct dwc3_trb         trb;
+	int ret;
+	u8 *buf0;
+	u8 *buf1;
+
+	buf0 = kmalloc(BUF_SIZE, GFP_KERNEL);
+	if (!buf0)
+		return -ENOMEM;
+	buf1 = kmalloc(BUF_SIZE, GFP_KERNEL);
+	if (!buf1)
+		return -ENOMEM;
+
+	memset(buf0, 0xaa, BUF_SIZE);
+	memset(buf1, 0x33, BUF_SIZE);
+
+	memset(&trb, 0, sizeof(trb));
+	memset(&par0, 0, sizeof(par0));
+	memset(&par1, 0, sizeof(par1));
+
+	trb.lst = 1;
+	trb.trbctl = DWC3_TRBCTL_NORMAL;
+	trb.length = BUF_SIZE;
+	trb.hwo = 1;
+
+	trb.bplh = virt_to_phys(buf0);
+	dwc3_trb_to_hw(&trb, &trb_0);
+
+	trb.bplh = virt_to_phys(buf1);
+	dwc3_trb_to_hw(&trb, &trb_1);
+
+	par0.param0.depstrtxfer.transfer_desc_addr_high =
+		upper_32_bits(virt_to_phys(&trb_0));
+	par0.param1.depstrtxfer.transfer_desc_addr_low =
+		lower_32_bits(virt_to_phys(&trb_0));
+
+	par1.param0.depstrtxfer.transfer_desc_addr_high =
+		upper_32_bits(virt_to_phys(&trb_1));
+	par1.param1.depstrtxfer.transfer_desc_addr_low =
+		lower_32_bits(virt_to_phys(&trb_1));
+
+	dwc3_send_testmode_cmd(dwc, 1);
+
+	ret = dwc3_send_gadget_ep_cmd(dwc, 0, DWC3_DEPCMD_STARTTRANSFER, &par0);
+	ret = dwc3_send_gadget_ep_cmd(dwc, 1, DWC3_DEPCMD_STARTTRANSFER, &par1);
+
+	dwc3_send_testmode_cmd(dwc, 0);
+	return -EBUSY;
+}
+
+static const struct file_operations dwc3_testmode_fops = {
+	.open			= dwc3_testmode_open,
+	.read			= seq_read,
+	.release		= single_release,
+};
+
+int __devinit dwc3_debugfs_init(struct dwc3 *dwc)
+{
+	struct dentry		*root;
+	struct dentry		*file;
+	int			ret;
+
+	root = debugfs_create_dir(dev_name(dwc->dev), NULL);
+	if (IS_ERR(root)){
+		ret = PTR_ERR(root);
+		goto err0;
+	}
+
+	dwc->root = root;
+
+	file = debugfs_create_file("regdump", S_IRUGO, root, dwc,
+			&dwc3_regdump_fops);
+	if (IS_ERR(file)) {
+		ret = PTR_ERR(file);
+		goto err1;
+	}
+	file = debugfs_create_file("testmode", S_IRUGO, root, dwc,
+			&dwc3_testmode_fops);
+	if (IS_ERR(file)) {
+		ret = PTR_ERR(file);
+		goto err1;
+	}
+
+	return 0;
+
+err1:
+	debugfs_remove_recursive(root);
+
+err0:
+	return ret;
+}
+
+void __devexit dwc3_debugfs_exit(struct dwc3 *dwc)
+{
+	debugfs_remove_recursive(dwc->root);
+	dwc->root = NULL;
+}
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
new file mode 100644
index 000000000000..08fffe6d1a9e
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -0,0 +1,410 @@
+/**
+ * dwc3-omap.c - OMAP Specific Glue layer
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+
+#include "io.h"
+
+/*
+ * All these registers belong to OMAP's Wrapper around the
+ * DesignWare USB3 Core.
+ */
+
+#define USBOTGSS_REVISION			0x0000
+#define USBOTGSS_SYSCONFIG			0x0010
+#define USBOTGSS_IRQ_EOI			0x0020
+#define USBOTGSS_IRQSTATUS_RAW_0		0x0024
+#define USBOTGSS_IRQSTATUS_0			0x0028
+#define USBOTGSS_IRQENABLE_SET_0		0x002c
+#define USBOTGSS_IRQENABLE_CLR_0		0x0030
+#define USBOTGSS_IRQSTATUS_RAW_1		0x0034
+#define USBOTGSS_IRQSTATUS_1			0x0038
+#define USBOTGSS_IRQENABLE_SET_1		0x003c
+#define USBOTGSS_IRQENABLE_CLR_1		0x0040
+#define USBOTGSS_UTMI_OTG_CTRL			0x0080
+#define USBOTGSS_UTMI_OTG_STATUS		0x0084
+#define USBOTGSS_MMRAM_OFFSET			0x0100
+#define USBOTGSS_FLADJ				0x0104
+#define USBOTGSS_DEBUG_CFG			0x0108
+#define USBOTGSS_DEBUG_DATA			0x010c
+
+/* SYSCONFIG REGISTER */
+#define USBOTGSS_SYSCONFIG_DMADISABLE		(1 << 16)
+#define USBOTGSS_SYSCONFIG_STANDBYMODE(x)	((x) << 4)
+#define USBOTGSS_SYSCONFIG_IDLEMODE(x)		((x) << 2)
+
+/* IRQ_EOI REGISTER */
+#define USBOTGSS_IRQ_EOI_LINE_NUMBER		(1 << 0)
+
+/* IRQS0 BITS */
+#define USBOTGSS_IRQO_COREIRQ_ST		(1 << 0)
+
+/* IRQ1 BITS */
+#define USBOTGSS_IRQ1_DMADISABLECLR		(1 << 17)
+#define USBOTGSS_IRQ1_OEVT			(1 << 16)
+#define USBOTGSS_IRQ1_DRVVBUS_RISE		(1 << 13)
+#define USBOTGSS_IRQ1_CHRGVBUS_RISE		(1 << 12)
+#define USBOTGSS_IRQ1_DISCHRGVBUS_RISE		(1 << 11)
+#define USBOTGSS_IRQ1_IDPULLUP_RISE		(1 << 8)
+#define USBOTGSS_IRQ1_DRVVBUS_FALL		(1 << 5)
+#define USBOTGSS_IRQ1_CHRGVBUS_FALL		(1 << 4)
+#define USBOTGSS_IRQ1_DISCHRGVBUS_FALL		(1 << 3)
+#define USBOTGSS_IRQ1_IDPULLUP_FALL		(1 << 0)
+
+/* UTMI_OTG_CTRL REGISTER */
+#define USBOTGSS_UTMI_OTG_CTRL_DRVVBUS		(1 << 5)
+#define USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS		(1 << 4)
+#define USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS	(1 << 3)
+#define USBOTGSS_UTMI_OTG_CTRL_IDPULLUP		(1 << 0)
+
+/* UTMI_OTG_STATUS REGISTER */
+#define USBOTGSS_UTMI_OTG_STATUS_SW_MODE	(1 << 31)
+#define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT	(1 << 9)
+#define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE (1 << 8)
+#define USBOTGSS_UTMI_OTG_STATUS_IDDIG		(1 << 4)
+#define USBOTGSS_UTMI_OTG_STATUS_SESSEND	(1 << 3)
+#define USBOTGSS_UTMI_OTG_STATUS_SESSVALID	(1 << 2)
+#define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID	(1 << 1)
+
+struct dwc3_omap {
+	/* device lock */
+	spinlock_t		lock;
+
+	struct platform_device	*dwc3;
+	struct device		*dev;
+
+	int			irq;
+	void __iomem		*base;
+
+	void			*context;
+	u32			resource_size;
+
+	u32			dma_status:1;
+};
+
+#ifdef CONFIG_PM
+static int dwc3_omap_suspend(struct device *dev)
+{
+	struct dwc3_omap	*omap = dev_get_drvdata(dev);
+
+	memcpy_fromio(omap->context, omap->base, omap->resource_size);
+
+	return 0;
+}
+
+static int dwc3_omap_resume(struct device *dev)
+{
+	struct dwc3_omap	*omap = dev_get_drvdata(dev);
+
+	memcpy_toio(omap->base, omap->context, omap->resource_size);
+
+	return 0;
+}
+
+static int dwc3_omap_idle(struct device *dev)
+{
+	struct dwc3_omap	*omap = dev_get_drvdata(dev);
+	u32			reg;
+
+	/* stop DMA Engine */
+	reg = dwc3_readl(omap->base, USBOTGSS_SYSCONFIG);
+	reg &= ~(USBOTGSS_SYSCONFIG_DMADISABLE);
+	dwc3_writel(omap->base, USBOTGSS_SYSCONFIG, reg);
+
+	return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(dwc3_omap_pm_ops, dwc3_omap_suspend,
+		dwc3_omap_resume, dwc3_omap_idle);
+
+#define DEV_PM_OPS	(&dwc3_omap_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
+{
+	struct dwc3_omap	*omap = _omap;
+	u32			reg;
+	u32			ctrl;
+
+	spin_lock(&omap->lock);
+
+	reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_1);
+	ctrl = dwc3_readl(omap->base, USBOTGSS_UTMI_OTG_CTRL);
+
+	if (reg & USBOTGSS_IRQ1_DMADISABLECLR) {
+		dev_dbg(omap->base, "DMA Disable was Cleared\n");
+		omap->dma_status = false;
+	}
+
+	if (reg & USBOTGSS_IRQ1_OEVT)
+		dev_dbg(omap->base, "OTG Event\n");
+
+	if (reg & USBOTGSS_IRQ1_DRVVBUS_RISE) {
+		dev_dbg(omap->base, "DRVVBUS Rise\n");
+		ctrl |= USBOTGSS_UTMI_OTG_CTRL_DRVVBUS;
+	}
+
+	if (reg & USBOTGSS_IRQ1_CHRGVBUS_RISE) {
+		dev_dbg(omap->base, "CHRGVBUS Rise\n");
+		ctrl |= USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS;
+	}
+
+	if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_RISE) {
+		dev_dbg(omap->base, "DISCHRGVBUS Rise\n");
+		ctrl |= USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS;
+	}
+
+	if (reg & USBOTGSS_IRQ1_IDPULLUP_RISE) {
+		dev_dbg(omap->base, "IDPULLUP Rise\n");
+		ctrl |= USBOTGSS_UTMI_OTG_CTRL_IDPULLUP;
+	}
+
+	if (reg & USBOTGSS_IRQ1_DRVVBUS_FALL) {
+		dev_dbg(omap->base, "DRVVBUS Fall\n");
+		ctrl &= ~USBOTGSS_UTMI_OTG_CTRL_DRVVBUS;
+	}
+
+	if (reg & USBOTGSS_IRQ1_CHRGVBUS_FALL) {
+		dev_dbg(omap->base, "CHRGVBUS Fall\n");
+		ctrl &= ~USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS;
+	}
+
+	if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_FALL) {
+		dev_dbg(omap->base, "DISCHRGVBUS Fall\n");
+		ctrl &= ~USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS;
+	}
+
+	if (reg & USBOTGSS_IRQ1_IDPULLUP_FALL) {
+		dev_dbg(omap->base, "IDPULLUP Fall\n");
+		ctrl &= ~USBOTGSS_UTMI_OTG_CTRL_IDPULLUP;
+	}
+
+	dwc3_writel(omap->base, USBOTGSS_UTMI_OTG_CTRL, ctrl);
+
+	spin_unlock(&omap->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit dwc3_omap_probe(struct platform_device *pdev)
+{
+	struct platform_device	*dwc3;
+	struct dwc3_omap	*omap;
+	struct resource		*res;
+
+	int			ret = -ENOMEM;
+	int			irq;
+
+	u32			reg;
+
+	void __iomem		*base;
+	void			*context;
+
+	omap = kzalloc(sizeof(*omap), GFP_KERNEL);
+	if (!omap) {
+		dev_err(&pdev->dev, "not enough memory\n");
+		goto err0;
+	}
+
+	platform_set_drvdata(pdev, omap);
+
+	irq = platform_get_irq(pdev, 1);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "missing IRQ resource\n");
+		ret = -EINVAL;
+		goto err1;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev, "missing memory base resource\n");
+		ret = -EINVAL;
+		goto err1;
+	}
+
+	base = ioremap_nocache(res->start, resource_size(res));
+	if (!base) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		goto err1;
+	}
+
+	dwc3 = platform_device_alloc("dwc3-omap", -1);
+	if (!dwc3) {
+		dev_err(&pdev->dev, "couldn't allocate dwc3 device\n");
+		goto err2;
+	}
+
+	context = kzalloc(resource_size(res), GFP_KERNEL);
+	if (!context) {
+		dev_err(&pdev->dev, "couldn't allocate dwc3 context memory\n");
+		goto err3;
+	}
+
+	spin_lock_init(&omap->lock);
+	dma_set_coherent_mask(&dwc3->dev, pdev->dev.coherent_dma_mask);
+
+	dwc3->dev.parent = &pdev->dev;
+	dwc3->dev.dma_mask = pdev->dev.dma_mask;
+	dwc3->dev.dma_parms = pdev->dev.dma_parms;
+	omap->resource_size = resource_size(res);
+	omap->context	= context;
+	omap->dev	= &pdev->dev;
+	omap->irq	= irq;
+	omap->base	= base;
+	omap->dwc3	= dwc3;
+
+	/* check the DMA Status */
+	reg = dwc3_readl(omap->base, USBOTGSS_SYSCONFIG);
+	omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE);
+
+	ret = request_irq(omap->irq, dwc3_omap_interrupt, 0,
+			"dwc3-wrapper", omap);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request IRQ #%d --> %d\n",
+				omap->irq, ret);
+		goto err4;
+	}
+
+	/* enable all IRQs */
+	dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, 0x01);
+
+	reg = (USBOTGSS_IRQ1_DMADISABLECLR |
+			USBOTGSS_IRQ1_OEVT |
+			USBOTGSS_IRQ1_DRVVBUS_RISE |
+			USBOTGSS_IRQ1_CHRGVBUS_RISE |
+			USBOTGSS_IRQ1_DISCHRGVBUS_RISE |
+			USBOTGSS_IRQ1_IDPULLUP_RISE |
+			USBOTGSS_IRQ1_DRVVBUS_FALL |
+			USBOTGSS_IRQ1_CHRGVBUS_FALL |
+			USBOTGSS_IRQ1_DISCHRGVBUS_FALL |
+			USBOTGSS_IRQ1_IDPULLUP_FALL);
+
+	dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg);
+
+	ret = platform_device_add_resources(dwc3, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "couldn't add resources to dwc3 device\n");
+		goto err5;
+	}
+
+	ret = platform_device_add(dwc3);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register dwc3 device\n");
+		goto err5;
+	}
+
+	return 0;
+
+err5:
+	free_irq(omap->irq, omap);
+
+err4:
+	kfree(omap->context);
+
+err3:
+	platform_device_put(dwc3);
+
+err2:
+	iounmap(base);
+
+err1:
+	kfree(omap);
+
+err0:
+	return ret;
+}
+
+static int __devexit dwc3_omap_remove(struct platform_device *pdev)
+{
+	struct dwc3_omap	*omap = platform_get_drvdata(pdev);
+
+	platform_device_unregister(omap->dwc3);
+
+	free_irq(omap->irq, omap);
+	iounmap(omap->base);
+
+	kfree(omap->context);
+	kfree(omap);
+
+	return 0;
+}
+
+static const struct of_device_id of_dwc3_matach[] = {
+	{
+		"ti,dwc3",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_dwc3_matach);
+
+static struct platform_driver dwc3_omap_driver = {
+	.probe		= dwc3_omap_probe,
+	.remove		= __devexit_p(dwc3_omap_remove),
+	.driver		= {
+		.name	= "omap-dwc3",
+		.pm	= DEV_PM_OPS,
+		.of_match_table	= of_dwc3_matach,
+	},
+};
+
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("DesignWare USB3 OMAP Glue Layer");
+
+static int __devinit dwc3_omap_init(void)
+{
+	return platform_driver_register(&dwc3_omap_driver);
+}
+module_init(dwc3_omap_init);
+
+static void __exit dwc3_omap_exit(void)
+{
+	platform_driver_unregister(&dwc3_omap_driver);
+}
+module_exit(dwc3_omap_exit);
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
new file mode 100644
index 000000000000..e3b77d2dc034
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -0,0 +1,220 @@
+/**
+ * dwc3-pci.c - PCI Specific glue layer
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+/* FIXME define these in <linux/pci_ids.h> */
+#define PCI_VENDOR_ID_SYNOPSYS		0x16c3
+#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3	0xabcd
+
+#define DWC3_PCI_DEVS_POSSIBLE	32
+
+struct dwc3_pci {
+	struct device		*dev;
+	struct platform_device	*dwc3;
+};
+
+static DECLARE_BITMAP(dwc3_pci_devs, DWC3_PCI_DEVS_POSSIBLE);
+
+static int dwc3_pci_get_device_id(struct dwc3_pci *glue)
+{
+	int		id;
+
+again:
+	id = find_first_zero_bit(dwc3_pci_devs, DWC3_PCI_DEVS_POSSIBLE);
+	if (id < DWC3_PCI_DEVS_POSSIBLE) {
+		int old;
+
+		old = test_and_set_bit(id, dwc3_pci_devs);
+		if (old)
+			goto again;
+	} else {
+		dev_err(glue->dev, "no space for new device\n");
+		id = -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void dwc3_pci_put_device_id(struct dwc3_pci *glue, int id)
+{
+	int			ret;
+
+	if (id < 0)
+		return;
+
+	ret = test_bit(id, dwc3_pci_devs);
+	WARN(!ret, "Device: %s\nID %d not in use\n",
+			dev_driver_string(glue->dev), id);
+	clear_bit(id, dwc3_pci_devs);
+}
+
+static int __devinit dwc3_pci_probe(struct pci_dev *pci,
+		const struct pci_device_id *id)
+{
+	struct resource		res[2];
+	struct platform_device	*dwc3;
+	struct dwc3_pci		*glue;
+	int			ret = -ENOMEM;
+	int			devid;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pci->dev, "not enough memory\n");
+		goto err0;
+	}
+
+	glue->dev	= &pci->dev;
+
+	ret = pci_enable_device(pci);
+	if (ret) {
+		dev_err(&pci->dev, "failed to enable pci device\n");
+		goto err1;
+	}
+
+	pci_set_power_state(pci, PCI_D0);
+	pci_set_master(pci);
+
+	devid = dwc3_pci_get_device_id(glue);
+	if (devid < 0)
+		goto err2;
+
+	dwc3 = platform_device_alloc("dwc3-pci", devid);
+	if (!dwc3) {
+		dev_err(&pci->dev, "couldn't allocate dwc3 device\n");
+		goto err3;
+	}
+
+	memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
+
+	res[0].start	= pci_resource_start(pci, 0);
+	res[0].end	= pci_resource_end(pci, 0);
+	res[0].name	= "dwc_usb3";
+	res[0].flags	= IORESOURCE_MEM;
+
+	res[1].start	= pci->irq;
+	res[1].name	= "dwc_usb3";
+	res[1].flags	= IORESOURCE_IRQ;
+
+	ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res));
+	if (ret) {
+		dev_err(&pci->dev, "couldn't add resources to dwc3 device\n");
+		goto err4;
+	}
+
+	pci_set_drvdata(pci, glue);
+
+	dma_set_coherent_mask(&dwc3->dev, pci->dev.coherent_dma_mask);
+
+	dwc3->dev.dma_mask = pci->dev.dma_mask;
+	dwc3->dev.dma_parms = pci->dev.dma_parms;
+	dwc3->dev.parent = &pci->dev;
+	glue->dwc3	= dwc3;
+
+	ret = platform_device_add(dwc3);
+	if (ret) {
+		dev_err(&pci->dev, "failed to register dwc3 device\n");
+		goto err4;
+	}
+
+	return 0;
+
+err4:
+	pci_set_drvdata(pci, NULL);
+	platform_device_put(dwc3);
+
+err3:
+	dwc3_pci_put_device_id(glue, devid);
+
+err2:
+	pci_disable_device(pci);
+
+err1:
+	kfree(pci);
+
+err0:
+	return ret;
+}
+
+static void __devexit dwc3_pci_remove(struct pci_dev *pci)
+{
+	struct dwc3_pci	*glue = pci_get_drvdata(pci);
+
+	dwc3_pci_put_device_id(glue, glue->dwc3->id);
+	platform_device_unregister(glue->dwc3);
+	pci_set_drvdata(pci, NULL);
+	pci_disable_device(pci);
+	kfree(glue);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
+				PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
+	},
+	{  }	/* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
+
+static struct pci_driver dwc3_pci_driver = {
+	.name		= "pci-dwc3",
+	.id_table	= dwc3_pci_id_table,
+	.probe		= dwc3_pci_probe,
+	.remove		= __devexit_p(dwc3_pci_remove),
+};
+
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");
+
+static int __devinit dwc3_pci_init(void)
+{
+	return pci_register_driver(&dwc3_pci_driver);
+}
+module_init(dwc3_pci_init);
+
+static void __exit dwc3_pci_exit(void)
+{
+	pci_unregister_driver(&dwc3_pci_driver);
+}
+module_exit(dwc3_pci_exit);
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
new file mode 100644
index 000000000000..4698fe013769
--- /dev/null
+++ b/drivers/usb/dwc3/ep0.c
@@ -0,0 +1,782 @@
+/**
+ * ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "core.h"
+#include "gadget.h"
+#include "io.h"
+
+static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event);
+
+static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
+{
+	switch (state) {
+	case EP0_UNCONNECTED:
+		return "Unconnected";
+	case EP0_IDLE:
+		return "Idle";
+	case EP0_IN_DATA_PHASE:
+		return "IN Data Phase";
+	case EP0_OUT_DATA_PHASE:
+		return "OUT Data Phase";
+	case EP0_IN_WAIT_GADGET:
+		return "IN Wait Gadget";
+	case EP0_OUT_WAIT_GADGET:
+		return "OUT Wait Gadget";
+	case EP0_IN_WAIT_NRDY:
+		return "IN Wait NRDY";
+	case EP0_OUT_WAIT_NRDY:
+		return "OUT Wait NRDY";
+	case EP0_IN_STATUS_PHASE:
+		return "IN Status Phase";
+	case EP0_OUT_STATUS_PHASE:
+		return "OUT Status Phase";
+	case EP0_STALL:
+		return "Stall";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
+		u32 len)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+	struct dwc3_trb_hw		*trb_hw;
+	struct dwc3_trb			trb;
+	struct dwc3_ep			*dep;
+
+	int				ret;
+
+	dep = dwc->eps[epnum];
+
+	trb_hw = dwc->ep0_trb;
+	memset(&trb, 0, sizeof(trb));
+
+	switch (dwc->ep0state) {
+	case EP0_IDLE:
+		trb.trbctl = DWC3_TRBCTL_CONTROL_SETUP;
+		break;
+
+	case EP0_IN_WAIT_NRDY:
+	case EP0_OUT_WAIT_NRDY:
+	case EP0_IN_STATUS_PHASE:
+	case EP0_OUT_STATUS_PHASE:
+		if (dwc->three_stage_setup)
+			trb.trbctl = DWC3_TRBCTL_CONTROL_STATUS3;
+		else
+			trb.trbctl = DWC3_TRBCTL_CONTROL_STATUS2;
+
+		if (dwc->ep0state == EP0_IN_WAIT_NRDY)
+			dwc->ep0state = EP0_IN_STATUS_PHASE;
+		else if (dwc->ep0state == EP0_OUT_WAIT_NRDY)
+			dwc->ep0state = EP0_OUT_STATUS_PHASE;
+		break;
+
+	case EP0_IN_WAIT_GADGET:
+		dwc->ep0state = EP0_IN_WAIT_NRDY;
+		return 0;
+		break;
+
+	case EP0_OUT_WAIT_GADGET:
+		dwc->ep0state = EP0_OUT_WAIT_NRDY;
+		return 0;
+
+		break;
+
+	case EP0_IN_DATA_PHASE:
+	case EP0_OUT_DATA_PHASE:
+		trb.trbctl = DWC3_TRBCTL_CONTROL_DATA;
+		break;
+
+	default:
+		dev_err(dwc->dev, "%s() can't in state %d\n", __func__,
+				dwc->ep0state);
+		return -EINVAL;
+	}
+
+	trb.bplh = buf_dma;
+	trb.length = len;
+
+	trb.hwo	= 1;
+	trb.lst	= 1;
+	trb.ioc	= 1;
+	trb.isp_imi = 1;
+
+	dwc3_trb_to_hw(&trb, trb_hw);
+
+	memset(&params, 0, sizeof(params));
+	params.param0.depstrtxfer.transfer_desc_addr_high =
+		upper_32_bits(dwc->ep0_trb_addr);
+	params.param1.depstrtxfer.transfer_desc_addr_low =
+		lower_32_bits(dwc->ep0_trb_addr);
+
+	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
+			DWC3_DEPCMD_STARTTRANSFER, &params);
+	if (ret < 0) {
+		dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n");
+		return ret;
+	}
+
+	dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc,
+			dep->number);
+
+	return 0;
+}
+
+static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
+		struct dwc3_request *req)
+{
+	struct dwc3		*dwc = dep->dwc;
+	int			ret;
+
+	req->request.actual	= 0;
+	req->request.status	= -EINPROGRESS;
+	req->direction		= dep->direction;
+	req->epnum		= dep->number;
+
+	list_add_tail(&req->list, &dep->request_list);
+	dwc3_map_buffer_to_dma(req);
+
+	ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma,
+			req->request.length);
+	if (ret < 0) {
+		list_del(&req->list);
+		dwc3_unmap_buffer_from_dma(req);
+	}
+
+	return ret;
+}
+
+int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
+		gfp_t gfp_flags)
+{
+	struct dwc3_request		*req = to_dwc3_request(request);
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+
+	unsigned long			flags;
+
+	int				ret;
+
+	switch (dwc->ep0state) {
+	case EP0_IN_DATA_PHASE:
+	case EP0_IN_WAIT_GADGET:
+	case EP0_IN_WAIT_NRDY:
+	case EP0_IN_STATUS_PHASE:
+		dep = dwc->eps[1];
+		break;
+
+	case EP0_OUT_DATA_PHASE:
+	case EP0_OUT_WAIT_GADGET:
+	case EP0_OUT_WAIT_NRDY:
+	case EP0_OUT_STATUS_PHASE:
+		dep = dwc->eps[0];
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	if (!dep->desc) {
+		dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
+				request, dep->name);
+		ret = -ESHUTDOWN;
+		goto out;
+	}
+
+	/* we share one TRB for ep0/1 */
+	if (!list_empty(&dwc->eps[0]->request_list) ||
+			!list_empty(&dwc->eps[1]->request_list) ||
+			dwc->ep0_status_pending) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	dev_vdbg(dwc->dev, "queueing request %p to %s length %d, state '%s'\n",
+			request, dep->name, request->length,
+			dwc3_ep0_state_string(dwc->ep0state));
+
+	ret = __dwc3_gadget_ep0_queue(dep, req);
+
+out:
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
+{
+	/* stall is always issued on EP0 */
+	__dwc3_gadget_ep_set_halt(dwc->eps[0], 1);
+	dwc->eps[0]->flags &= ~DWC3_EP_STALL;
+	dwc->ep0state = EP0_IDLE;
+	dwc3_ep0_out_start(dwc);
+}
+
+void dwc3_ep0_out_start(struct dwc3 *dwc)
+{
+	struct dwc3_ep			*dep;
+	int				ret;
+
+	dep = dwc->eps[0];
+
+	ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8);
+	WARN_ON(ret < 0);
+}
+
+/*
+ * Send a zero length packet for the status phase of the control transfer
+ */
+static void dwc3_ep0_do_setup_status(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	struct dwc3_ep			*dep;
+	int				ret;
+	u32				epnum;
+
+	epnum = event->endpoint_number;
+	dep = dwc->eps[epnum];
+
+	if (epnum)
+		dwc->ep0state = EP0_IN_STATUS_PHASE;
+	else
+		dwc->ep0state = EP0_OUT_STATUS_PHASE;
+
+	/*
+	 * Not sure Why I need a buffer for a zero transfer. Maybe the
+	 * HW reacts strange on a NULL pointer
+	 */
+	ret = dwc3_ep0_start_trans(dwc, epnum, dwc->ctrl_req_addr, 0);
+	if (ret) {
+		dev_dbg(dwc->dev, "failed to start transfer, stalling\n");
+		dwc3_ep0_stall_and_restart(dwc);
+	}
+}
+
+static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
+{
+	struct dwc3_ep		*dep;
+	u32			windex = le16_to_cpu(wIndex_le);
+	u32			epnum;
+
+	epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1;
+	if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
+		epnum |= 1;
+
+	dep = dwc->eps[epnum];
+	if (dep->flags & DWC3_EP_ENABLED)
+		return dep;
+
+	return NULL;
+}
+
+static void dwc3_ep0_send_status_response(struct dwc3 *dwc)
+{
+	u32 epnum;
+
+	if (dwc->ep0state == EP0_IN_DATA_PHASE)
+		epnum = 1;
+	else
+		epnum = 0;
+
+	dwc3_ep0_start_trans(dwc, epnum, dwc->ctrl_req_addr,
+			dwc->ep0_usb_req.length);
+	dwc->ep0_status_pending = 1;
+}
+
+/*
+ * ch 9.4.5
+ */
+static int dwc3_ep0_handle_status(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	struct dwc3_ep		*dep;
+	u32			recip;
+	u16			usb_status = 0;
+	__le16			*response_pkt;
+
+	recip = ctrl->bRequestType & USB_RECIP_MASK;
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		/*
+		 * We are self-powered. U1/U2/LTM will be set later
+		 * once we handle this states. RemoteWakeup is 0 on SS
+		 */
+		usb_status |= dwc->is_selfpowered << USB_DEVICE_SELF_POWERED;
+		break;
+
+	case USB_RECIP_INTERFACE:
+		/*
+		 * Function Remote Wake Capable	D0
+		 * Function Remote Wakeup	D1
+		 */
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
+		if (!dep)
+		       return -EINVAL;
+
+		if (dep->flags & DWC3_EP_STALL)
+			usb_status = 1 << USB_ENDPOINT_HALT;
+		break;
+	default:
+		return -EINVAL;
+	};
+
+	response_pkt = (__le16 *) dwc->setup_buf;
+	*response_pkt = cpu_to_le16(usb_status);
+	dwc->ep0_usb_req.length = sizeof(*response_pkt);
+	dwc3_ep0_send_status_response(dwc);
+
+	return 0;
+}
+
+static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
+		struct usb_ctrlrequest *ctrl, int set)
+{
+	struct dwc3_ep		*dep;
+	u32			recip;
+	u32			wValue;
+	u32			wIndex;
+	u32			reg;
+	int			ret;
+	u32			mode;
+
+	wValue = le16_to_cpu(ctrl->wValue);
+	wIndex = le16_to_cpu(ctrl->wIndex);
+	recip = ctrl->bRequestType & USB_RECIP_MASK;
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+
+		/*
+		 * 9.4.1 says only only for SS, in AddressState only for
+		 * default control pipe
+		 */
+		switch (wValue) {
+		case USB_DEVICE_U1_ENABLE:
+		case USB_DEVICE_U2_ENABLE:
+		case USB_DEVICE_LTM_ENABLE:
+			if (dwc->dev_state != DWC3_CONFIGURED_STATE)
+				return -EINVAL;
+			if (dwc->speed != DWC3_DSTS_SUPERSPEED)
+				return -EINVAL;
+		}
+
+		/* XXX add U[12] & LTM */
+		switch (wValue) {
+		case USB_DEVICE_REMOTE_WAKEUP:
+			break;
+		case USB_DEVICE_U1_ENABLE:
+			break;
+		case USB_DEVICE_U2_ENABLE:
+			break;
+		case USB_DEVICE_LTM_ENABLE:
+			break;
+
+		case USB_DEVICE_TEST_MODE:
+			if ((wIndex & 0xff) != 0)
+				return -EINVAL;
+			if (!set)
+				return -EINVAL;
+
+			mode = wIndex >> 8;
+			reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+			reg &= ~DWC3_DCTL_TSTCTRL_MASK;
+
+			switch (mode) {
+			case TEST_J:
+			case TEST_K:
+			case TEST_SE0_NAK:
+			case TEST_PACKET:
+			case TEST_FORCE_EN:
+				reg |= mode << 1;
+				break;
+			default:
+				return -EINVAL;
+			}
+			dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+
+	case USB_RECIP_INTERFACE:
+		switch (wValue) {
+		case USB_INTRF_FUNC_SUSPEND:
+			if (wIndex & USB_INTRF_FUNC_SUSPEND_LP)
+				/* XXX enable Low power suspend */
+				;
+			if (wIndex & USB_INTRF_FUNC_SUSPEND_RW)
+				/* XXX enable remote wakeup */
+				;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		switch (wValue) {
+		case USB_ENDPOINT_HALT:
+
+			dep =  dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
+			if (!dep)
+				return -EINVAL;
+			ret = __dwc3_gadget_ep_set_halt(dep, set);
+			if (ret)
+				return -EINVAL;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	};
+
+	dwc->ep0state = EP0_IN_WAIT_NRDY;
+
+	return 0;
+}
+
+static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	int ret = 0;
+	u32 addr;
+	u32 reg;
+
+	addr = le16_to_cpu(ctrl->wValue);
+	if (addr > 127)
+		return -EINVAL;
+
+	switch (dwc->dev_state) {
+	case DWC3_DEFAULT_STATE:
+	case DWC3_ADDRESS_STATE:
+		/*
+		 * Not sure if we should program DevAddr now or later
+		 */
+		reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+		reg &= ~(DWC3_DCFG_DEVADDR_MASK);
+		reg |= DWC3_DCFG_DEVADDR(addr);
+		dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+
+		if (addr)
+			dwc->dev_state = DWC3_ADDRESS_STATE;
+		else
+			dwc->dev_state = DWC3_DEFAULT_STATE;
+		break;
+
+	case DWC3_CONFIGURED_STATE:
+		ret = -EINVAL;
+		break;
+	}
+	dwc->ep0state = EP0_IN_WAIT_NRDY;
+	return ret;
+}
+
+static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	int ret;
+
+	spin_unlock(&dwc->lock);
+	ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl);
+	spin_lock(&dwc->lock);
+	return ret;
+}
+
+static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	u32 cfg;
+	int ret;
+
+	cfg = le16_to_cpu(ctrl->wValue);
+
+	switch (dwc->dev_state) {
+	case DWC3_DEFAULT_STATE:
+		return -EINVAL;
+		break;
+
+	case DWC3_ADDRESS_STATE:
+		ret = dwc3_ep0_delegate_req(dwc, ctrl);
+		/* if the cfg matches and the cfg is non zero */
+		if (!ret && cfg)
+			dwc->dev_state = DWC3_CONFIGURED_STATE;
+		break;
+
+	case DWC3_CONFIGURED_STATE:
+		ret = dwc3_ep0_delegate_req(dwc, ctrl);
+		if (!cfg)
+			dwc->dev_state = DWC3_ADDRESS_STATE;
+		break;
+	}
+	return 0;
+}
+
+static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	int ret;
+
+	switch (ctrl->bRequest) {
+	case USB_REQ_GET_STATUS:
+		dev_vdbg(dwc->dev, "USB_REQ_GET_STATUS\n");
+		ret = dwc3_ep0_handle_status(dwc, ctrl);
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+		dev_vdbg(dwc->dev, "USB_REQ_CLEAR_FEATURE\n");
+		ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
+		break;
+	case USB_REQ_SET_FEATURE:
+		dev_vdbg(dwc->dev, "USB_REQ_SET_FEATURE\n");
+		ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
+		break;
+	case USB_REQ_SET_ADDRESS:
+		dev_vdbg(dwc->dev, "USB_REQ_SET_ADDRESS\n");
+		ret = dwc3_ep0_set_address(dwc, ctrl);
+		break;
+	case USB_REQ_SET_CONFIGURATION:
+		dev_vdbg(dwc->dev, "USB_REQ_SET_CONFIGURATION\n");
+		ret = dwc3_ep0_set_config(dwc, ctrl);
+		break;
+	default:
+		dev_vdbg(dwc->dev, "Forwarding to gadget driver\n");
+		ret = dwc3_ep0_delegate_req(dwc, ctrl);
+		break;
+	};
+
+	return ret;
+}
+
+static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	struct usb_ctrlrequest *ctrl = dwc->ctrl_req;
+	int ret;
+	u32 len;
+
+	if (!dwc->gadget_driver)
+		goto err;
+
+	len = le16_to_cpu(ctrl->wLength);
+	if (!len) {
+		dwc->ep0state = EP0_IN_WAIT_GADGET;
+		dwc->three_stage_setup = 0;
+	} else {
+		dwc->three_stage_setup = 1;
+		if (ctrl->bRequestType & USB_DIR_IN)
+			dwc->ep0state = EP0_IN_DATA_PHASE;
+		else
+			dwc->ep0state = EP0_OUT_DATA_PHASE;
+	}
+
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+		ret = dwc3_ep0_std_request(dwc, ctrl);
+	else
+		ret = dwc3_ep0_delegate_req(dwc, ctrl);
+
+	if (ret >= 0)
+		return;
+
+err:
+	dwc3_ep0_stall_and_restart(dwc);
+}
+
+static void dwc3_ep0_complete_data(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	struct dwc3_request	*r = NULL;
+	struct usb_request	*ur;
+	struct dwc3_trb		trb;
+	struct dwc3_ep		*dep;
+	u32			transfered;
+	u8			epnum;
+
+	epnum = event->endpoint_number;
+	dep = dwc->eps[epnum];
+
+	if (!dwc->ep0_status_pending) {
+		r = next_request(&dep->request_list);
+		ur = &r->request;
+	} else {
+		ur = &dwc->ep0_usb_req;
+		dwc->ep0_status_pending = 0;
+	}
+
+	dwc3_trb_to_nat(dwc->ep0_trb, &trb);
+
+	transfered = ur->length - trb.length;
+	ur->actual += transfered;
+
+	if ((epnum & 1) && ur->actual < ur->length) {
+		/* for some reason we did not get everything out */
+
+		dwc3_ep0_stall_and_restart(dwc);
+		dwc3_gadget_giveback(dep, r, -ECONNRESET);
+	} else {
+		/*
+		 * handle the case where we have to send a zero packet. This
+		 * seems to be case when req.length > maxpacket. Could it be?
+		 */
+		/* The transfer is complete, wait for HOST */
+		if (epnum & 1)
+			dwc->ep0state = EP0_IN_WAIT_NRDY;
+		else
+			dwc->ep0state = EP0_OUT_WAIT_NRDY;
+
+		if (r)
+			dwc3_gadget_giveback(dep, r, 0);
+	}
+}
+
+static void dwc3_ep0_complete_req(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	struct dwc3_request	*r;
+	struct dwc3_ep		*dep;
+	u8			epnum;
+
+	epnum = event->endpoint_number;
+	dep = dwc->eps[epnum];
+
+	if (!list_empty(&dep->request_list)) {
+		r = next_request(&dep->request_list);
+
+		dwc3_gadget_giveback(dep, r, 0);
+	}
+
+	dwc->ep0state = EP0_IDLE;
+	dwc3_ep0_out_start(dwc);
+}
+
+static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
+			const struct dwc3_event_depevt *event)
+{
+	switch (dwc->ep0state) {
+	case EP0_IDLE:
+		dwc3_ep0_inspect_setup(dwc, event);
+		break;
+
+	case EP0_IN_DATA_PHASE:
+	case EP0_OUT_DATA_PHASE:
+		dwc3_ep0_complete_data(dwc, event);
+		break;
+
+	case EP0_IN_STATUS_PHASE:
+	case EP0_OUT_STATUS_PHASE:
+		dwc3_ep0_complete_req(dwc, event);
+		break;
+
+	case EP0_IN_WAIT_NRDY:
+	case EP0_OUT_WAIT_NRDY:
+	case EP0_IN_WAIT_GADGET:
+	case EP0_OUT_WAIT_GADGET:
+	case EP0_UNCONNECTED:
+	case EP0_STALL:
+		break;
+	}
+}
+
+static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	switch (dwc->ep0state) {
+	case EP0_IN_WAIT_GADGET:
+		dwc->ep0state = EP0_IN_WAIT_NRDY;
+		break;
+	case EP0_OUT_WAIT_GADGET:
+		dwc->ep0state = EP0_OUT_WAIT_NRDY;
+		break;
+
+	case EP0_IN_WAIT_NRDY:
+	case EP0_OUT_WAIT_NRDY:
+		dwc3_ep0_do_setup_status(dwc, event);
+		break;
+
+	case EP0_IDLE:
+	case EP0_IN_STATUS_PHASE:
+	case EP0_OUT_STATUS_PHASE:
+	case EP0_IN_DATA_PHASE:
+	case EP0_OUT_DATA_PHASE:
+	case EP0_UNCONNECTED:
+	case EP0_STALL:
+		break;
+	}
+}
+
+void dwc3_ep0_interrupt(struct dwc3 *dwc,
+		const const struct dwc3_event_depevt *event)
+{
+	u8			epnum = event->endpoint_number;
+
+	dev_dbg(dwc->dev, "%s while ep%d%s in state '%s'\n",
+			dwc3_ep_event_string(event->endpoint_event),
+			epnum, (epnum & 1) ? "in" : "out",
+			dwc3_ep0_state_string(dwc->ep0state));
+
+	switch (event->endpoint_event) {
+	case DWC3_DEPEVT_XFERCOMPLETE:
+		dwc3_ep0_xfer_complete(dwc, event);
+		break;
+
+	case DWC3_DEPEVT_XFERNOTREADY:
+		dwc3_ep0_xfernotready(dwc, event);
+		break;
+
+	case DWC3_DEPEVT_XFERINPROGRESS:
+	case DWC3_DEPEVT_RXTXFIFOEVT:
+	case DWC3_DEPEVT_STREAMEVT:
+	case DWC3_DEPEVT_EPCMDCMPLT:
+		break;
+	}
+}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
new file mode 100644
index 000000000000..cebaef720cd4
--- /dev/null
+++ b/drivers/usb/dwc3/gadget.c
@@ -0,0 +1,2062 @@
+/**
+ * gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "core.h"
+#include "gadget.h"
+#include "io.h"
+
+#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+void dwc3_map_buffer_to_dma(struct dwc3_request *req)
+{
+	struct dwc3			*dwc = req->dep->dwc;
+
+	if (req->request.dma == DMA_ADDR_INVALID) {
+		req->request.dma = dma_map_single(dwc->dev, req->request.buf,
+				req->request.length, req->direction
+				? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		req->mapped = true;
+	} else {
+		dma_sync_single_for_device(dwc->dev, req->request.dma,
+				req->request.length, req->direction
+				? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		req->mapped = false;
+	}
+}
+
+void dwc3_unmap_buffer_from_dma(struct dwc3_request *req)
+{
+	struct dwc3			*dwc = req->dep->dwc;
+
+	if (req->mapped) {
+		dma_unmap_single(dwc->dev, req->request.dma,
+				req->request.length, req->direction
+				? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		req->mapped = 0;
+	} else {
+		dma_sync_single_for_cpu(dwc->dev, req->request.dma,
+				req->request.length, req->direction
+				? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+	}
+}
+
+void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
+		int status)
+{
+	struct dwc3			*dwc = dep->dwc;
+
+	if (req->queued) {
+		dep->busy_slot++;
+		/*
+		 * Skip LINK TRB. We can't use req->trb and check for
+		 * DWC3_TRBCTL_LINK_TRB because it points the TRB we just
+		 * completed (not the LINK TRB).
+		 */
+		if (((dep->busy_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
+				usb_endpoint_xfer_isoc(dep->desc))
+			dep->busy_slot++;
+	}
+	list_del(&req->list);
+
+	if (req->request.status == -EINPROGRESS)
+		req->request.status = status;
+
+	dwc3_unmap_buffer_from_dma(req);
+
+	dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
+			req, dep->name, req->request.actual,
+			req->request.length, status);
+
+	spin_unlock(&dwc->lock);
+	req->request.complete(&req->dep->endpoint, &req->request);
+	spin_lock(&dwc->lock);
+}
+
+static const char *dwc3_gadget_ep_cmd_string(u8 cmd)
+{
+	switch (cmd) {
+	case DWC3_DEPCMD_DEPSTARTCFG:
+		return "Start New Configuration";
+	case DWC3_DEPCMD_ENDTRANSFER:
+		return "End Transfer";
+	case DWC3_DEPCMD_UPDATETRANSFER:
+		return "Update Transfer";
+	case DWC3_DEPCMD_STARTTRANSFER:
+		return "Start Transfer";
+	case DWC3_DEPCMD_CLEARSTALL:
+		return "Clear Stall";
+	case DWC3_DEPCMD_SETSTALL:
+		return "Set Stall";
+	case DWC3_DEPCMD_GETSEQNUMBER:
+		return "Get Data Sequence Number";
+	case DWC3_DEPCMD_SETTRANSFRESOURCE:
+		return "Set Endpoint Transfer Resource";
+	case DWC3_DEPCMD_SETEPCONFIG:
+		return "Set Endpoint Configuration";
+	default:
+		return "UNKNOWN command";
+	}
+}
+
+int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
+		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
+{
+	struct dwc3_ep		*dep = dwc->eps[ep];
+	unsigned long		timeout = 500;
+	u32			reg;
+
+	dev_vdbg(dwc->dev, "%s: cmd '%s' params %08x %08x %08x\n",
+			dep->name,
+			dwc3_gadget_ep_cmd_string(cmd), params->param0.raw,
+			params->param1.raw, params->param2.raw);
+
+	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0.raw);
+	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1.raw);
+	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2.raw);
+
+	dwc3_writel(dwc->regs, DWC3_DEPCMD(ep), cmd | DWC3_DEPCMD_CMDACT);
+	do {
+		reg = dwc3_readl(dwc->regs, DWC3_DEPCMD(ep));
+		if (!(reg & DWC3_DEPCMD_CMDACT)) {
+			dev_vdbg(dwc->dev, "CMD Compl Status %d DEPCMD %04x\n",
+					((reg & 0xf000) >> 12), reg);
+			return 0;
+		}
+
+		/*
+		 * XXX Figure out a sane timeout here. 500ms is way too much.
+		 * We can't sleep here, because it is also called from
+		 * interrupt context.
+		 */
+		timeout--;
+		if (!timeout)
+			return -ETIMEDOUT;
+
+		mdelay(1);
+	} while (1);
+}
+
+static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
+		struct dwc3_trb_hw *trb)
+{
+	u32		offset = trb - dep->trb_pool;
+
+	return dep->trb_pool_dma + offset;
+}
+
+static int dwc3_alloc_trb_pool(struct dwc3_ep *dep)
+{
+	struct dwc3		*dwc = dep->dwc;
+
+	if (dep->trb_pool)
+		return 0;
+
+	if (dep->number == 0 || dep->number == 1)
+		return 0;
+
+	dep->trb_pool = dma_alloc_coherent(dwc->dev,
+			sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
+			&dep->trb_pool_dma, GFP_KERNEL);
+	if (!dep->trb_pool) {
+		dev_err(dep->dwc->dev, "failed to allocate trb pool for %s\n",
+				dep->name);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void dwc3_free_trb_pool(struct dwc3_ep *dep)
+{
+	struct dwc3		*dwc = dep->dwc;
+
+	dma_free_coherent(dwc->dev, sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
+			dep->trb_pool, dep->trb_pool_dma);
+
+	dep->trb_pool = NULL;
+	dep->trb_pool_dma = 0;
+}
+
+static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+	u32			cmd;
+
+	memset(&params, 0x00, sizeof(params));
+
+	if (dep->number != 1) {
+		cmd = DWC3_DEPCMD_DEPSTARTCFG;
+		/* XferRscIdx == 0 for ep0 and 2 for the remaining */
+		if (dep->number > 1)
+			cmd |= DWC3_DEPCMD_PARAM(2);
+
+		return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
+	}
+
+	return 0;
+}
+
+static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+
+	memset(&params, 0x00, sizeof(params));
+
+	params.param0.depcfg.ep_type = usb_endpoint_type(desc);
+	params.param0.depcfg.max_packet_size = usb_endpoint_maxp(desc);
+
+	params.param1.depcfg.xfer_complete_enable = true;
+	params.param1.depcfg.xfer_not_ready_enable = true;
+
+	if (usb_endpoint_xfer_isoc(desc))
+		params.param1.depcfg.xfer_in_progress_enable = true;
+
+	/*
+	 * We are doing 1:1 mapping for endpoints, meaning
+	 * Physical Endpoints 2 maps to Logical Endpoint 2 and
+	 * so on. We consider the direction bit as part of the physical
+	 * endpoint number. So USB endpoint 0x81 is 0x03.
+	 */
+	params.param1.depcfg.ep_number = dep->number;
+
+	/*
+	 * We must use the lower 16 TX FIFOs even though
+	 * HW might have more
+	 */
+	if (dep->direction)
+		params.param0.depcfg.fifo_number = dep->number >> 1;
+
+	if (desc->bInterval) {
+		params.param1.depcfg.binterval_m1 = desc->bInterval - 1;
+		dep->interval = 1 << (desc->bInterval - 1);
+	}
+
+	return dwc3_send_gadget_ep_cmd(dwc, dep->number,
+			DWC3_DEPCMD_SETEPCONFIG, &params);
+}
+
+static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+
+	memset(&params, 0x00, sizeof(params));
+
+	params.param0.depxfercfg.number_xfer_resources = 1;
+
+	return dwc3_send_gadget_ep_cmd(dwc, dep->number,
+			DWC3_DEPCMD_SETTRANSFRESOURCE, &params);
+}
+
+/**
+ * __dwc3_gadget_ep_enable - Initializes a HW endpoint
+ * @dep: endpoint to be initialized
+ * @desc: USB Endpoint Descriptor
+ *
+ * Caller should take care of locking
+ */
+static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct dwc3		*dwc = dep->dwc;
+	u32			reg;
+	int			ret = -ENOMEM;
+
+	if (!(dep->flags & DWC3_EP_ENABLED)) {
+		ret = dwc3_gadget_start_config(dwc, dep);
+		if (ret)
+			return ret;
+	}
+
+	ret = dwc3_gadget_set_ep_config(dwc, dep, desc);
+	if (ret)
+		return ret;
+
+	if (!(dep->flags & DWC3_EP_ENABLED)) {
+		struct dwc3_trb_hw	*trb_st_hw;
+		struct dwc3_trb_hw	*trb_link_hw;
+		struct dwc3_trb		trb_link;
+
+		ret = dwc3_gadget_set_xfer_resource(dwc, dep);
+		if (ret)
+			return ret;
+
+		dep->desc = desc;
+		dep->type = usb_endpoint_type(desc);
+		dep->flags |= DWC3_EP_ENABLED;
+
+		reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
+		reg |= DWC3_DALEPENA_EP(dep->number);
+		dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
+
+		if (!usb_endpoint_xfer_isoc(desc))
+			return 0;
+
+		memset(&trb_link, 0, sizeof(trb_link));
+
+		/* Link TRB for ISOC. The HWO but is never reset */
+		trb_st_hw = &dep->trb_pool[0];
+
+		trb_link.bplh = dwc3_trb_dma_offset(dep, trb_st_hw);
+		trb_link.trbctl = DWC3_TRBCTL_LINK_TRB;
+		trb_link.hwo = true;
+
+		trb_link_hw = &dep->trb_pool[DWC3_TRB_NUM - 1];
+		dwc3_trb_to_hw(&trb_link, trb_link_hw);
+	}
+
+	return 0;
+}
+
+static void dwc3_gadget_nuke_reqs(struct dwc3_ep *dep, const int status)
+{
+	struct dwc3_request		*req;
+
+	while (!list_empty(&dep->request_list)) {
+		req = next_request(&dep->request_list);
+
+		dwc3_gadget_giveback(dep, req, status);
+	}
+	/* nuke queued TRBs as well on command complete */
+	dep->flags |= DWC3_EP_WILL_SHUTDOWN;
+}
+
+/**
+ * __dwc3_gadget_ep_disable - Disables a HW endpoint
+ * @dep: the endpoint to disable
+ *
+ * Caller should take care of locking
+ */
+static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum);
+static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
+{
+	struct dwc3		*dwc = dep->dwc;
+	u32			reg;
+
+	dep->flags &= ~DWC3_EP_ENABLED;
+	dwc3_stop_active_transfer(dwc, dep->number);
+	dwc3_gadget_nuke_reqs(dep, -ESHUTDOWN);
+
+	reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
+	reg &= ~DWC3_DALEPENA_EP(dep->number);
+	dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
+
+	dep->desc = NULL;
+	dep->type = 0;
+
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int dwc3_gadget_ep0_enable(struct usb_ep *ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	return -EINVAL;
+}
+
+static int dwc3_gadget_ep0_disable(struct usb_ep *ep)
+{
+	return -EINVAL;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int dwc3_gadget_ep_enable(struct usb_ep *ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct dwc3_ep			*dep;
+	struct dwc3			*dwc;
+	unsigned long			flags;
+	int				ret;
+
+	if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
+		pr_debug("dwc3: invalid parameters\n");
+		return -EINVAL;
+	}
+
+	if (!desc->wMaxPacketSize) {
+		pr_debug("dwc3: missing wMaxPacketSize\n");
+		return -EINVAL;
+	}
+
+	dep = to_dwc3_ep(ep);
+	dwc = dep->dwc;
+
+	switch (usb_endpoint_type(desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		strncat(dep->name, "-control", sizeof(dep->name));
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		strncat(dep->name, "-isoc", sizeof(dep->name));
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		strncat(dep->name, "-bulk", sizeof(dep->name));
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		strncat(dep->name, "-int", sizeof(dep->name));
+		break;
+	default:
+		dev_err(dwc->dev, "invalid endpoint transfer type\n");
+	}
+
+	if (dep->flags & DWC3_EP_ENABLED) {
+		dev_WARN_ONCE(dwc->dev, true, "%s is already enabled\n",
+				dep->name);
+		return 0;
+	}
+
+	dev_vdbg(dwc->dev, "Enabling %s\n", dep->name);
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	ret = __dwc3_gadget_ep_enable(dep, desc);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static int dwc3_gadget_ep_disable(struct usb_ep *ep)
+{
+	struct dwc3_ep			*dep;
+	struct dwc3			*dwc;
+	unsigned long			flags;
+	int				ret;
+
+	if (!ep) {
+		pr_debug("dwc3: invalid parameters\n");
+		return -EINVAL;
+	}
+
+	dep = to_dwc3_ep(ep);
+	dwc = dep->dwc;
+
+	if (!(dep->flags & DWC3_EP_ENABLED)) {
+		dev_WARN_ONCE(dwc->dev, true, "%s is already disabled\n",
+				dep->name);
+		return 0;
+	}
+
+	snprintf(dep->name, sizeof(dep->name), "ep%d%s",
+			dep->number >> 1,
+			(dep->number & 1) ? "in" : "out");
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	ret = __dwc3_gadget_ep_disable(dep);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep,
+	gfp_t gfp_flags)
+{
+	struct dwc3_request		*req;
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req) {
+		dev_err(dwc->dev, "not enough memory\n");
+		return NULL;
+	}
+
+	req->epnum	= dep->number;
+	req->dep	= dep;
+	req->request.dma = DMA_ADDR_INVALID;
+
+	return &req->request;
+}
+
+static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
+		struct usb_request *request)
+{
+	struct dwc3_request		*req = to_dwc3_request(request);
+
+	kfree(req);
+}
+
+/*
+ * dwc3_prepare_trbs - setup TRBs from requests
+ * @dep: endpoint for which requests are being prepared
+ * @starting: true if the endpoint is idle and no requests are queued.
+ *
+ * The functions goes through the requests list and setups TRBs for the
+ * transfers. The functions returns once there are not more TRBs available or
+ * it run out of requests.
+ */
+static struct dwc3_request *dwc3_prepare_trbs(struct dwc3_ep *dep,
+		bool starting)
+{
+	struct dwc3_request	*req, *n, *ret = NULL;
+	struct dwc3_trb_hw	*trb_hw;
+	struct dwc3_trb		trb;
+	u32			trbs_left;
+
+	BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
+
+	/* the first request must not be queued */
+	trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK;
+	/*
+	 * if busy & slot are equal than it is either full or empty. If we are
+	 * starting to proceed requests then we are empty. Otherwise we ar
+	 * full and don't do anything
+	 */
+	if (!trbs_left) {
+		if (!starting)
+			return NULL;
+		trbs_left = DWC3_TRB_NUM;
+		/*
+		 * In case we start from scratch, we queue the ISOC requests
+		 * starting from slot 1. This is done because we use ring
+		 * buffer and have no LST bit to stop us. Instead, we place
+		 * IOC bit TRB_NUM/4. We try to avoid to having an interrupt
+		 * after the first request so we start at slot 1 and have
+		 * 7 requests proceed before we hit the first IOC.
+		 * Other transfer types don't use the ring buffer and are
+		 * processed from the first TRB until the last one. Since we
+		 * don't wrap around we have to start at the beginning.
+		 */
+		if (usb_endpoint_xfer_isoc(dep->desc)) {
+			dep->busy_slot = 1;
+			dep->free_slot = 1;
+		} else {
+			dep->busy_slot = 0;
+			dep->free_slot = 0;
+		}
+	}
+
+	/* The last TRB is a link TRB, not used for xfer */
+	if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->desc))
+		return NULL;
+
+	list_for_each_entry_safe(req, n, &dep->request_list, list) {
+		unsigned int last_one = 0;
+		unsigned int cur_slot;
+
+		trb_hw = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
+		cur_slot = dep->free_slot;
+		dep->free_slot++;
+
+		/* Skip the LINK-TRB on ISOC */
+		if (((cur_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
+				usb_endpoint_xfer_isoc(dep->desc))
+			continue;
+
+		dwc3_gadget_move_request_queued(req);
+		memset(&trb, 0, sizeof(trb));
+		trbs_left--;
+
+		/* Is our TRB pool empty? */
+		if (!trbs_left)
+			last_one = 1;
+		/* Is this the last request? */
+		if (list_empty(&dep->request_list))
+			last_one = 1;
+
+		/*
+		 * FIXME we shouldn't need to set LST bit always but we are
+		 * facing some weird problem with the Hardware where it doesn't
+		 * complete even though it has been previously started.
+		 *
+		 * While we're debugging the problem, as a workaround to
+		 * multiple TRBs handling, use only one TRB at a time.
+		 */
+		last_one = 1;
+
+		req->trb = trb_hw;
+		if (!ret)
+			ret = req;
+
+		trb.bplh = req->request.dma;
+
+		if (usb_endpoint_xfer_isoc(dep->desc)) {
+			trb.isp_imi = true;
+			trb.csp = true;
+		} else {
+			trb.lst = last_one;
+		}
+
+		switch (usb_endpoint_type(dep->desc)) {
+		case USB_ENDPOINT_XFER_CONTROL:
+			trb.trbctl = DWC3_TRBCTL_CONTROL_SETUP;
+			break;
+
+		case USB_ENDPOINT_XFER_ISOC:
+			trb.trbctl = DWC3_TRBCTL_ISOCHRONOUS;
+
+			/* IOC every DWC3_TRB_NUM / 4 so we can refill */
+			if (!(cur_slot % (DWC3_TRB_NUM / 4)))
+				trb.ioc = last_one;
+			break;
+
+		case USB_ENDPOINT_XFER_BULK:
+		case USB_ENDPOINT_XFER_INT:
+			trb.trbctl = DWC3_TRBCTL_NORMAL;
+			break;
+		default:
+			/*
+			 * This is only possible with faulty memory because we
+			 * checked it already :)
+			 */
+			BUG();
+		}
+
+		trb.length	= req->request.length;
+		trb.hwo = true;
+
+		dwc3_trb_to_hw(&trb, trb_hw);
+		req->trb_dma = dwc3_trb_dma_offset(dep, trb_hw);
+
+		if (last_one)
+			break;
+	}
+
+	return ret;
+}
+
+static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
+		int start_new)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+	struct dwc3_request		*req;
+	struct dwc3			*dwc = dep->dwc;
+	int				ret;
+	u32				cmd;
+
+	if (start_new && (dep->flags & DWC3_EP_BUSY)) {
+		dev_vdbg(dwc->dev, "%s: endpoint busy\n", dep->name);
+		return -EBUSY;
+	}
+	dep->flags &= ~DWC3_EP_PENDING_REQUEST;
+
+	/*
+	 * If we are getting here after a short-out-packet we don't enqueue any
+	 * new requests as we try to set the IOC bit only on the last request.
+	 */
+	if (start_new) {
+		if (list_empty(&dep->req_queued))
+			dwc3_prepare_trbs(dep, start_new);
+
+		/* req points to the first request which will be sent */
+		req = next_request(&dep->req_queued);
+	} else {
+		/*
+		 * req points to the first request where HWO changed
+		 * from 0 to 1
+		 */
+		req = dwc3_prepare_trbs(dep, start_new);
+	}
+	if (!req) {
+		dep->flags |= DWC3_EP_PENDING_REQUEST;
+		return 0;
+	}
+
+	memset(&params, 0, sizeof(params));
+	params.param0.depstrtxfer.transfer_desc_addr_high =
+		upper_32_bits(req->trb_dma);
+	params.param1.depstrtxfer.transfer_desc_addr_low =
+		lower_32_bits(req->trb_dma);
+
+	if (start_new)
+		cmd = DWC3_DEPCMD_STARTTRANSFER;
+	else
+		cmd = DWC3_DEPCMD_UPDATETRANSFER;
+
+	cmd |= DWC3_DEPCMD_PARAM(cmd_param);
+	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
+	if (ret < 0) {
+		dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n");
+
+		/*
+		 * FIXME we need to iterate over the list of requests
+		 * here and stop, unmap, free and del each of the linked
+		 * requests instead of we do now.
+		 */
+		dwc3_unmap_buffer_from_dma(req);
+		list_del(&req->list);
+		return ret;
+	}
+
+	dep->flags |= DWC3_EP_BUSY;
+	dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc,
+			dep->number);
+	if (!dep->res_trans_idx)
+		printk_once(KERN_ERR "%s() res_trans_idx is invalid\n", __func__);
+	return 0;
+}
+
+static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
+{
+	req->request.actual	= 0;
+	req->request.status	= -EINPROGRESS;
+	req->direction		= dep->direction;
+	req->epnum		= dep->number;
+
+	/*
+	 * We only add to our list of requests now and
+	 * start consuming the list once we get XferNotReady
+	 * IRQ.
+	 *
+	 * That way, we avoid doing anything that we don't need
+	 * to do now and defer it until the point we receive a
+	 * particular token from the Host side.
+	 *
+	 * This will also avoid Host cancelling URBs due to too
+	 * many NACKs.
+	 */
+	dwc3_map_buffer_to_dma(req);
+	list_add_tail(&req->list, &dep->request_list);
+
+	/*
+	 * There is one special case: XferNotReady with
+	 * empty list of requests. We need to kick the
+	 * transfer here in that situation, otherwise
+	 * we will be NAKing forever.
+	 *
+	 * If we get XferNotReady before gadget driver
+	 * has a chance to queue a request, we will ACK
+	 * the IRQ but won't be able to receive the data
+	 * until the next request is queued. The following
+	 * code is handling exactly that.
+	 */
+	if (dep->flags & DWC3_EP_PENDING_REQUEST) {
+		int ret;
+		int start_trans;
+
+		start_trans = 1;
+		if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
+				dep->flags & DWC3_EP_BUSY)
+			start_trans = 0;
+
+		ret =  __dwc3_gadget_kick_transfer(dep, 0, start_trans);
+		if (ret && ret != -EBUSY) {
+			struct dwc3	*dwc = dep->dwc;
+
+			dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
+					dep->name);
+		}
+	};
+
+	return 0;
+}
+
+static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
+	gfp_t gfp_flags)
+{
+	struct dwc3_request		*req = to_dwc3_request(request);
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+
+	unsigned long			flags;
+
+	int				ret;
+
+	if (!dep->desc) {
+		dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
+				request, ep->name);
+		return -ESHUTDOWN;
+	}
+
+	dev_vdbg(dwc->dev, "queing request %p to %s length %d\n",
+			request, ep->name, request->length);
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	ret = __dwc3_gadget_ep_queue(dep, req);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
+		struct usb_request *request)
+{
+	struct dwc3_request		*req = to_dwc3_request(request);
+	struct dwc3_request		*r = NULL;
+
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+
+	unsigned long			flags;
+	int				ret = 0;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	list_for_each_entry(r, &dep->request_list, list) {
+		if (r == req)
+			break;
+	}
+
+	if (r != req) {
+		list_for_each_entry(r, &dep->req_queued, list) {
+			if (r == req)
+				break;
+		}
+		if (r == req) {
+			/* wait until it is processed */
+			dwc3_stop_active_transfer(dwc, dep->number);
+			goto out0;
+		}
+		dev_err(dwc->dev, "request %p was not queued to %s\n",
+				request, ep->name);
+		ret = -EINVAL;
+		goto out0;
+	}
+
+	/* giveback the request */
+	dwc3_gadget_giveback(dep, req, -ECONNRESET);
+
+out0:
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
+{
+	struct dwc3_gadget_ep_cmd_params	params;
+	struct dwc3				*dwc = dep->dwc;
+	int					ret;
+
+	memset(&params, 0x00, sizeof(params));
+
+	if (value) {
+		if (dep->number == 0 || dep->number == 1)
+			dwc->ep0state = EP0_STALL;
+
+		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
+			DWC3_DEPCMD_SETSTALL, &params);
+		if (ret)
+			dev_err(dwc->dev, "failed to %s STALL on %s\n",
+					value ? "set" : "clear",
+					dep->name);
+		else
+			dep->flags |= DWC3_EP_STALL;
+	} else {
+		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
+			DWC3_DEPCMD_CLEARSTALL, &params);
+		if (ret)
+			dev_err(dwc->dev, "failed to %s STALL on %s\n",
+					value ? "set" : "clear",
+					dep->name);
+		else
+			dep->flags &= ~DWC3_EP_STALL;
+	}
+	return ret;
+}
+
+static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value)
+{
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+
+	unsigned long			flags;
+
+	int				ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	if (usb_endpoint_xfer_isoc(dep->desc)) {
+		dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = __dwc3_gadget_ep_set_halt(dep, value);
+out:
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep)
+{
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+
+	dep->flags |= DWC3_EP_WEDGE;
+
+	return usb_ep_set_halt(ep);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static struct usb_endpoint_descriptor dwc3_gadget_ep0_desc = {
+	.bLength	= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+	.bmAttributes	= USB_ENDPOINT_XFER_CONTROL,
+};
+
+static const struct usb_ep_ops dwc3_gadget_ep0_ops = {
+	.enable		= dwc3_gadget_ep0_enable,
+	.disable	= dwc3_gadget_ep0_disable,
+	.alloc_request	= dwc3_gadget_ep_alloc_request,
+	.free_request	= dwc3_gadget_ep_free_request,
+	.queue		= dwc3_gadget_ep0_queue,
+	.dequeue	= dwc3_gadget_ep_dequeue,
+	.set_halt	= dwc3_gadget_ep_set_halt,
+	.set_wedge	= dwc3_gadget_ep_set_wedge,
+};
+
+static const struct usb_ep_ops dwc3_gadget_ep_ops = {
+	.enable		= dwc3_gadget_ep_enable,
+	.disable	= dwc3_gadget_ep_disable,
+	.alloc_request	= dwc3_gadget_ep_alloc_request,
+	.free_request	= dwc3_gadget_ep_free_request,
+	.queue		= dwc3_gadget_ep_queue,
+	.dequeue	= dwc3_gadget_ep_dequeue,
+	.set_halt	= dwc3_gadget_ep_set_halt,
+	.set_wedge	= dwc3_gadget_ep_set_wedge,
+};
+
+/* -------------------------------------------------------------------------- */
+
+static int dwc3_gadget_get_frame(struct usb_gadget *g)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	u32			reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+	return DWC3_DSTS_SOFFN(reg);
+}
+
+static int dwc3_gadget_wakeup(struct usb_gadget *g)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+
+	unsigned long		timeout;
+	unsigned long		flags;
+
+	u32			reg;
+
+	int			ret = 0;
+
+	u8			link_state;
+	u8			speed;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	/*
+	 * According to the Databook Remote wakeup request should
+	 * be issued only when the device is in early suspend state.
+	 *
+	 * We can check that via USB Link State bits in DSTS register.
+	 */
+	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+
+	speed = reg & DWC3_DSTS_CONNECTSPD;
+	if (speed == DWC3_DSTS_SUPERSPEED) {
+		dev_dbg(dwc->dev, "no wakeup on SuperSpeed\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	link_state = DWC3_DSTS_USBLNKST(reg);
+
+	switch (link_state) {
+	case DWC3_LINK_STATE_RX_DET:	/* in HS, means Early Suspend */
+	case DWC3_LINK_STATE_U3:	/* in HS, means SUSPEND */
+		break;
+	default:
+		dev_dbg(dwc->dev, "can't wakeup from link state %d\n",
+				link_state);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+
+	/*
+	 * Switch link state to Recovery. In HS/FS/LS this means
+	 * RemoteWakeup Request
+	 */
+	reg |= DWC3_DCTL_ULSTCHNG_RECOVERY;
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+	/* wait for at least 2000us */
+	usleep_range(2000, 2500);
+
+	/* write zeroes to Link Change Request */
+	reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+	/* pool until Link State change to ON */
+	timeout = jiffies + msecs_to_jiffies(100);
+
+	while (!(time_after(jiffies, timeout))) {
+		reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+
+		/* in HS, means ON */
+		if (DWC3_DSTS_USBLNKST(reg) == DWC3_LINK_STATE_U0)
+			break;
+	}
+
+	if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) {
+		dev_err(dwc->dev, "failed to send remote wakeup\n");
+		ret = -EINVAL;
+	}
+
+out:
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
+		int is_selfpowered)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+
+	dwc->is_selfpowered = !!is_selfpowered;
+
+	return 0;
+}
+
+static void dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
+{
+	u32			reg;
+	unsigned long		timeout = 500;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	if (is_on)
+		reg |= DWC3_DCTL_RUN_STOP;
+	else
+		reg &= ~DWC3_DCTL_RUN_STOP;
+
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+	do {
+		reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+		if (is_on) {
+			if (!(reg & DWC3_DSTS_DEVCTRLHLT))
+				break;
+		} else {
+			if (reg & DWC3_DSTS_DEVCTRLHLT)
+				break;
+		}
+		/*
+		 * XXX reduce the 500ms delay
+		 */
+		timeout--;
+		if (!timeout)
+			break;
+		mdelay(1);
+	} while (1);
+
+	dev_vdbg(dwc->dev, "gadget %s data soft-%s\n",
+			dwc->gadget_driver
+			? dwc->gadget_driver->function : "no-function",
+			is_on ? "connect" : "disconnect");
+}
+
+static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+
+	is_on = !!is_on;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc3_gadget_run_stop(dwc, is_on);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
+}
+
+static int dwc3_gadget_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	struct dwc3_ep		*dep;
+	unsigned long		flags;
+	int			ret = 0;
+	u32			reg;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	if (dwc->gadget_driver) {
+		dev_err(dwc->dev, "%s is already bound to %s\n",
+				dwc->gadget.name,
+				dwc->gadget_driver->driver.name);
+		ret = -EBUSY;
+		goto err0;
+	}
+
+	dwc->gadget_driver	= driver;
+	dwc->gadget.dev.driver	= &driver->driver;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+
+	/*
+	 * REVISIT: power down scale might be different
+	 * depending on PHY used, need to pass that via platform_data
+	 */
+	reg |= DWC3_GCTL_PWRDNSCALE(0x61a)
+		| DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_DEVICE);
+	reg &= ~DWC3_GCTL_DISSCRAMBLE;
+
+	/*
+	 * WORKAROUND: DWC3 revisions <1.90a have a bug
+	 * when The device fails to connect at SuperSpeed
+	 * and falls back to high-speed mode which causes
+	 * the device to enter in a Connect/Disconnect loop
+	 */
+	if (dwc->revision < DWC3_REVISION_190A)
+		reg |= DWC3_GCTL_U2RSTECN;
+
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+	reg &= ~(DWC3_DCFG_SPEED_MASK);
+	reg |= DWC3_DCFG_SUPERSPEED;
+	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+
+	/* Start with SuperSpeed Default */
+	dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
+
+	dep = dwc->eps[0];
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
+		goto err0;
+	}
+
+	dep = dwc->eps[1];
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
+		goto err1;
+	}
+
+	/* begin to receive SETUP packets */
+	dwc->ep0state = EP0_IDLE;
+	dwc3_ep0_out_start(dwc);
+
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
+
+err1:
+	__dwc3_gadget_ep_disable(dwc->eps[0]);
+
+err0:
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static int dwc3_gadget_stop(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	__dwc3_gadget_ep_disable(dwc->eps[0]);
+	__dwc3_gadget_ep_disable(dwc->eps[1]);
+
+	dwc->gadget_driver	= NULL;
+	dwc->gadget.dev.driver	= NULL;
+
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
+}
+static const struct usb_gadget_ops dwc3_gadget_ops = {
+	.get_frame		= dwc3_gadget_get_frame,
+	.wakeup			= dwc3_gadget_wakeup,
+	.set_selfpowered	= dwc3_gadget_set_selfpowered,
+	.pullup			= dwc3_gadget_pullup,
+	.udc_start		= dwc3_gadget_start,
+	.udc_stop		= dwc3_gadget_stop,
+};
+
+/* -------------------------------------------------------------------------- */
+
+static int __devinit dwc3_gadget_init_endpoints(struct dwc3 *dwc)
+{
+	struct dwc3_ep			*dep;
+	u8				epnum;
+
+	INIT_LIST_HEAD(&dwc->gadget.ep_list);
+
+	for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
+		dep = kzalloc(sizeof(*dep), GFP_KERNEL);
+		if (!dep) {
+			dev_err(dwc->dev, "can't allocate endpoint %d\n",
+					epnum);
+			return -ENOMEM;
+		}
+
+		dep->dwc = dwc;
+		dep->number = epnum;
+		dwc->eps[epnum] = dep;
+
+		snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1,
+				(epnum & 1) ? "in" : "out");
+		dep->endpoint.name = dep->name;
+		dep->direction = (epnum & 1);
+
+		if (epnum == 0 || epnum == 1) {
+			dep->endpoint.maxpacket = 512;
+			dep->endpoint.ops = &dwc3_gadget_ep0_ops;
+			if (!epnum)
+				dwc->gadget.ep0 = &dep->endpoint;
+		} else {
+			int		ret;
+
+			dep->endpoint.maxpacket = 1024;
+			dep->endpoint.ops = &dwc3_gadget_ep_ops;
+			list_add_tail(&dep->endpoint.ep_list,
+					&dwc->gadget.ep_list);
+
+			ret = dwc3_alloc_trb_pool(dep);
+			if (ret) {
+				dev_err(dwc->dev, "%s: failed to allocate TRB pool\n", dep->name);
+				return ret;
+			}
+		}
+		INIT_LIST_HEAD(&dep->request_list);
+		INIT_LIST_HEAD(&dep->req_queued);
+	}
+
+	return 0;
+}
+
+static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
+{
+	struct dwc3_ep			*dep;
+	u8				epnum;
+
+	for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
+		dep = dwc->eps[epnum];
+		dwc3_free_trb_pool(dep);
+
+		if (epnum != 0 && epnum != 1)
+			list_del(&dep->endpoint.ep_list);
+
+		kfree(dep);
+	}
+}
+
+static void dwc3_gadget_release(struct device *dev)
+{
+	dev_dbg(dev, "%s\n", __func__);
+}
+
+/* -------------------------------------------------------------------------- */
+static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
+		const struct dwc3_event_depevt *event, int status)
+{
+	struct dwc3_request	*req;
+	struct dwc3_trb         trb;
+	unsigned int		count;
+	unsigned int		s_pkt = 0;
+
+	do {
+		req = next_request(&dep->req_queued);
+		if (!req)
+			break;
+
+		dwc3_trb_to_nat(req->trb, &trb);
+
+		if (trb.hwo) {
+			dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n",
+					dep->name, req->trb);
+			continue;
+		}
+		count = trb.length;
+
+		if (dep->direction) {
+			if (count) {
+				dev_err(dwc->dev, "incomplete IN transfer %s\n",
+						dep->name);
+				status = -ECONNRESET;
+			}
+		} else {
+			if (count && (event->status & DEPEVT_STATUS_SHORT))
+				s_pkt = 1;
+		}
+
+		/*
+		 * We assume here we will always receive the entire data block
+		 * which we should receive. Meaning, if we program RX to
+		 * receive 4K but we receive only 2K, we assume that's all we
+		 * should receive and we simply bounce the request back to the
+		 * gadget driver for further processing.
+		 */
+		req->request.actual += req->request.length - count;
+		dwc3_gadget_giveback(dep, req, status);
+		if (s_pkt)
+			break;
+		if ((event->status & DEPEVT_STATUS_LST) && trb.lst)
+			break;
+		if ((event->status & DEPEVT_STATUS_IOC) && trb.ioc)
+			break;
+	} while (1);
+
+	if ((event->status & DEPEVT_STATUS_IOC) && trb.ioc)
+		return 0;
+	return 1;
+}
+
+static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
+		struct dwc3_ep *dep, const struct dwc3_event_depevt *event,
+		int start_new)
+{
+	unsigned		status = 0;
+	int			clean_busy;
+
+	if (event->status & DEPEVT_STATUS_BUSERR)
+		status = -ECONNRESET;
+
+	clean_busy =  dwc3_cleanup_done_reqs(dwc, dep, event, status);
+	if (clean_busy)
+		dep->flags &= ~DWC3_EP_BUSY;
+}
+
+static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
+		struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
+{
+	u32 uf;
+
+	if (list_empty(&dep->request_list)) {
+		dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n",
+			dep->name);
+		return;
+	}
+
+	if (event->parameters) {
+		u32 mask;
+
+		mask = ~(dep->interval - 1);
+		uf = event->parameters & mask;
+		/* 4 micro frames in the future */
+		uf += dep->interval * 4;
+	} else {
+		uf = 0;
+	}
+
+	__dwc3_gadget_kick_transfer(dep, uf, 1);
+}
+
+static void dwc3_process_ep_cmd_complete(struct dwc3_ep *dep,
+		const struct dwc3_event_depevt *event)
+{
+	struct dwc3 *dwc = dep->dwc;
+	struct dwc3_event_depevt mod_ev = *event;
+
+	/*
+	 * We were asked to remove one requests. It is possible that this
+	 * request and a few other were started together and have the same
+	 * transfer index. Since we stopped the complete endpoint we don't
+	 * know how many requests were already completed (and not yet)
+	 * reported and how could be done (later). We purge them all until
+	 * the end of the list.
+	 */
+	mod_ev.status = DEPEVT_STATUS_LST;
+	dwc3_cleanup_done_reqs(dwc, dep, &mod_ev, -ESHUTDOWN);
+	dep->flags &= ~DWC3_EP_BUSY;
+	/* pending requets are ignored and are queued on XferNotReady */
+
+	if (dep->flags & DWC3_EP_WILL_SHUTDOWN) {
+		while (!list_empty(&dep->req_queued)) {
+			struct dwc3_request	*req;
+
+			req = next_request(&dep->req_queued);
+			dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
+		}
+		dep->flags &= DWC3_EP_WILL_SHUTDOWN;
+	}
+}
+
+static void dwc3_ep_cmd_compl(struct dwc3_ep *dep,
+		const struct dwc3_event_depevt *event)
+{
+	u32 param = event->parameters;
+	u32 cmd_type = (param >> 8) & ((1 << 5) - 1);
+
+	switch (cmd_type) {
+	case DWC3_DEPCMD_ENDTRANSFER:
+		dwc3_process_ep_cmd_complete(dep, event);
+		break;
+	case DWC3_DEPCMD_STARTTRANSFER:
+		dep->res_trans_idx = param & 0x7f;
+		break;
+	default:
+		printk(KERN_ERR "%s() unknown /unexpected type: %d\n",
+				__func__, cmd_type);
+		break;
+	};
+}
+
+static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	struct dwc3_ep		*dep;
+	u8			epnum = event->endpoint_number;
+
+	dep = dwc->eps[epnum];
+
+	dev_vdbg(dwc->dev, "%s: %s\n", dep->name,
+			dwc3_ep_event_string(event->endpoint_event));
+
+	if (epnum == 0 || epnum == 1) {
+		dwc3_ep0_interrupt(dwc, event);
+		return;
+	}
+
+	switch (event->endpoint_event) {
+	case DWC3_DEPEVT_XFERCOMPLETE:
+		if (usb_endpoint_xfer_isoc(dep->desc)) {
+			dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n",
+					dep->name);
+			return;
+		}
+
+		dwc3_endpoint_transfer_complete(dwc, dep, event, 1);
+		break;
+	case DWC3_DEPEVT_XFERINPROGRESS:
+		if (!usb_endpoint_xfer_isoc(dep->desc)) {
+			dev_dbg(dwc->dev, "%s is not an Isochronous endpoint\n",
+					dep->name);
+			return;
+		}
+
+		dwc3_endpoint_transfer_complete(dwc, dep, event, 0);
+		break;
+	case DWC3_DEPEVT_XFERNOTREADY:
+		if (usb_endpoint_xfer_isoc(dep->desc)) {
+			dwc3_gadget_start_isoc(dwc, dep, event);
+		} else {
+			int ret;
+
+			dev_vdbg(dwc->dev, "%s: reason %s\n",
+					dep->name, event->status
+					? "Transfer Active"
+					: "Transfer Not Active");
+
+			ret = __dwc3_gadget_kick_transfer(dep, 0, 1);
+			if (!ret || ret == -EBUSY)
+				return;
+
+			dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
+					dep->name);
+		}
+
+		break;
+	case DWC3_DEPEVT_RXTXFIFOEVT:
+		dev_dbg(dwc->dev, "%s FIFO Overrun\n", dep->name);
+		break;
+	case DWC3_DEPEVT_STREAMEVT:
+		dev_dbg(dwc->dev, "%s Stream Event\n", dep->name);
+		break;
+	case DWC3_DEPEVT_EPCMDCMPLT:
+		dwc3_ep_cmd_compl(dep, event);
+		break;
+	}
+}
+
+static void dwc3_disconnect_gadget(struct dwc3 *dwc)
+{
+	if (dwc->gadget_driver && dwc->gadget_driver->disconnect) {
+		spin_unlock(&dwc->lock);
+		dwc->gadget_driver->disconnect(&dwc->gadget);
+		spin_lock(&dwc->lock);
+	}
+}
+
+static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum)
+{
+	struct dwc3_ep *dep;
+	struct dwc3_gadget_ep_cmd_params params;
+	u32 cmd;
+	int ret;
+
+	dep = dwc->eps[epnum];
+
+	if (dep->res_trans_idx) {
+		cmd = DWC3_DEPCMD_ENDTRANSFER;
+		cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC;
+		cmd |= DWC3_DEPCMD_PARAM(dep->res_trans_idx);
+		memset(&params, 0, sizeof(params));
+		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
+		WARN_ON_ONCE(ret);
+	}
+}
+
+static void dwc3_stop_active_transfers(struct dwc3 *dwc)
+{
+	u32 epnum;
+
+	for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
+		struct dwc3_ep *dep;
+
+		dep = dwc->eps[epnum];
+		if (!(dep->flags & DWC3_EP_ENABLED))
+			continue;
+
+		__dwc3_gadget_ep_disable(dep);
+	}
+}
+
+static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
+{
+	u32 epnum;
+
+	for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
+		struct dwc3_ep *dep;
+		struct dwc3_gadget_ep_cmd_params params;
+		int ret;
+
+		dep = dwc->eps[epnum];
+
+		if (!(dep->flags & DWC3_EP_STALL))
+			continue;
+
+		dep->flags &= ~DWC3_EP_STALL;
+
+		memset(&params, 0, sizeof(params));
+		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
+				DWC3_DEPCMD_CLEARSTALL, &params);
+		WARN_ON_ONCE(ret);
+	}
+}
+
+static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
+{
+	dev_vdbg(dwc->dev, "%s\n", __func__);
+#if 0
+	XXX
+	U1/U2 is powersave optimization. Skip it for now. Anyway we need to
+	enable it before we can disable it.
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	reg &= ~DWC3_DCTL_INITU1ENA;
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+	reg &= ~DWC3_DCTL_INITU2ENA;
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+#endif
+
+	dwc3_stop_active_transfers(dwc);
+	dwc3_disconnect_gadget(dwc);
+
+	dwc->gadget.speed = USB_SPEED_UNKNOWN;
+}
+
+static void dwc3_gadget_usb3_phy_power(struct dwc3 *dwc, int on)
+{
+	u32			reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+
+	if (on)
+		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
+	else
+		reg |= DWC3_GUSB3PIPECTL_SUSPHY;
+
+	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+}
+
+static void dwc3_gadget_usb2_phy_power(struct dwc3 *dwc, int on)
+{
+	u32			reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+
+	if (on)
+		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+	else
+		reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+}
+
+static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
+{
+	u32			reg;
+
+	dev_vdbg(dwc->dev, "%s\n", __func__);
+
+	/* Enable PHYs */
+	dwc3_gadget_usb2_phy_power(dwc, true);
+	dwc3_gadget_usb3_phy_power(dwc, true);
+
+	if (dwc->gadget.speed != USB_SPEED_UNKNOWN)
+		dwc3_disconnect_gadget(dwc);
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	reg &= ~DWC3_DCTL_TSTCTRL_MASK;
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+	dwc3_stop_active_transfers(dwc);
+	dwc3_clear_stall_all_ep(dwc);
+
+	/* Reset device address to zero */
+	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+	reg &= ~(DWC3_DCFG_DEVADDR_MASK);
+	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+
+	/*
+	 * Wait for RxFifo to drain
+	 *
+	 * REVISIT probably shouldn't wait forever.
+	 * In case Hardware ends up in a screwed up
+	 * case, we error out, notify the user and,
+	 * maybe, WARN() or BUG() but leave the rest
+	 * of the kernel working fine.
+	 *
+	 * REVISIT the below is rather CPU intensive,
+	 * maybe we should read and if it doesn't work
+	 * sleep (not busy wait) for a few useconds.
+	 *
+	 * REVISIT why wait until the RXFIFO is empty anyway?
+	 */
+	while (!(dwc3_readl(dwc->regs, DWC3_DSTS)
+				& DWC3_DSTS_RXFIFOEMPTY))
+		cpu_relax();
+}
+
+static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
+{
+	u32 reg;
+	u32 usb30_clock = DWC3_GCTL_CLK_BUS;
+
+	/*
+	 * We change the clock only at SS but I dunno why I would want to do
+	 * this. Maybe it becomes part of the power saving plan.
+	 */
+
+	if (speed != DWC3_DSTS_SUPERSPEED)
+		return;
+
+	/*
+	 * RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed
+	 * each time on Connect Done.
+	 */
+	if (!usb30_clock)
+		return;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg |= DWC3_GCTL_RAMCLKSEL(usb30_clock);
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+}
+
+static void dwc3_gadget_disable_phy(struct dwc3 *dwc, u8 speed)
+{
+	switch (speed) {
+	case USB_SPEED_SUPER:
+		dwc3_gadget_usb2_phy_power(dwc, false);
+		break;
+	case USB_SPEED_HIGH:
+	case USB_SPEED_FULL:
+	case USB_SPEED_LOW:
+		dwc3_gadget_usb3_phy_power(dwc, false);
+		break;
+	}
+}
+
+static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+	struct dwc3_ep		*dep;
+	int			ret;
+	u32			reg;
+	u8			speed;
+
+	dev_vdbg(dwc->dev, "%s\n", __func__);
+
+	memset(&params, 0x00, sizeof(params));
+
+	dwc->ep0state = EP0_IDLE;
+	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+	speed = reg & DWC3_DSTS_CONNECTSPD;
+	dwc->speed = speed;
+
+	dwc3_update_ram_clk_sel(dwc, speed);
+
+	switch (speed) {
+	case DWC3_DCFG_SUPERSPEED:
+		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
+		dwc->gadget.ep0->maxpacket = 512;
+		dwc->gadget.speed = USB_SPEED_SUPER;
+		break;
+	case DWC3_DCFG_HIGHSPEED:
+		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
+		dwc->gadget.ep0->maxpacket = 64;
+		dwc->gadget.speed = USB_SPEED_HIGH;
+		break;
+	case DWC3_DCFG_FULLSPEED2:
+	case DWC3_DCFG_FULLSPEED1:
+		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
+		dwc->gadget.ep0->maxpacket = 64;
+		dwc->gadget.speed = USB_SPEED_FULL;
+		break;
+	case DWC3_DCFG_LOWSPEED:
+		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
+		dwc->gadget.ep0->maxpacket = 8;
+		dwc->gadget.speed = USB_SPEED_LOW;
+		break;
+	}
+
+	/* Disable unneded PHY */
+	dwc3_gadget_disable_phy(dwc, dwc->gadget.speed);
+
+	dep = dwc->eps[0];
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
+		return;
+	}
+
+	dep = dwc->eps[1];
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
+		return;
+	}
+
+	/*
+	 * Configure PHY via GUSB3PIPECTLn if required.
+	 *
+	 * Update GTXFIFOSIZn
+	 *
+	 * In both cases reset values should be sufficient.
+	 */
+}
+
+static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
+{
+	dev_vdbg(dwc->dev, "%s\n", __func__);
+
+	/*
+	 * TODO take core out of low power mode when that's
+	 * implemented.
+	 */
+
+	dwc->gadget_driver->resume(&dwc->gadget);
+}
+
+static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
+		unsigned int evtinfo)
+{
+	dev_vdbg(dwc->dev, "%s\n", __func__);
+
+	/*  The fith bit says SuperSpeed yes or no. */
+	dwc->link_state = evtinfo & DWC3_LINK_STATE_MASK;
+}
+
+static void dwc3_gadget_interrupt(struct dwc3 *dwc,
+		const struct dwc3_event_devt *event)
+{
+	switch (event->type) {
+	case DWC3_DEVICE_EVENT_DISCONNECT:
+		dwc3_gadget_disconnect_interrupt(dwc);
+		break;
+	case DWC3_DEVICE_EVENT_RESET:
+		dwc3_gadget_reset_interrupt(dwc);
+		break;
+	case DWC3_DEVICE_EVENT_CONNECT_DONE:
+		dwc3_gadget_conndone_interrupt(dwc);
+		break;
+	case DWC3_DEVICE_EVENT_WAKEUP:
+		dwc3_gadget_wakeup_interrupt(dwc);
+		break;
+	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
+		dwc3_gadget_linksts_change_interrupt(dwc, event->event_info);
+		break;
+	case DWC3_DEVICE_EVENT_EOPF:
+		dev_vdbg(dwc->dev, "End of Periodic Frame\n");
+		break;
+	case DWC3_DEVICE_EVENT_SOF:
+		dev_vdbg(dwc->dev, "Start of Periodic Frame\n");
+		break;
+	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
+		dev_vdbg(dwc->dev, "Erratic Error\n");
+		break;
+	case DWC3_DEVICE_EVENT_CMD_CMPL:
+		dev_vdbg(dwc->dev, "Command Complete\n");
+		break;
+	case DWC3_DEVICE_EVENT_OVERFLOW:
+		dev_vdbg(dwc->dev, "Overflow\n");
+		break;
+	default:
+		dev_dbg(dwc->dev, "UNKNOWN IRQ %d\n", event->type);
+	}
+}
+
+static void dwc3_process_event_entry(struct dwc3 *dwc,
+		const union dwc3_event *event)
+{
+	/* Endpoint IRQ, handle it and return early */
+	if (event->type.is_devspec == 0) {
+		/* depevt */
+		return dwc3_endpoint_interrupt(dwc, &event->depevt);
+	}
+
+	switch (event->type.type) {
+	case DWC3_EVENT_TYPE_DEV:
+		dwc3_gadget_interrupt(dwc, &event->devt);
+		break;
+	/* REVISIT what to do with Carkit and I2C events ? */
+	default:
+		dev_err(dwc->dev, "UNKNOWN IRQ type %d\n", event->raw);
+	}
+}
+
+static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
+{
+	struct dwc3_event_buffer *evt;
+	int left;
+	u32 count;
+
+	count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf));
+	count &= DWC3_GEVNTCOUNT_MASK;
+	if (!count)
+		return IRQ_NONE;
+
+	evt = dwc->ev_buffs[buf];
+	left = count;
+
+	while (left > 0) {
+		union dwc3_event event;
+
+		memcpy(&event.raw, (evt->buf + evt->lpos), sizeof(event.raw));
+		dwc3_process_event_entry(dwc, &event);
+		/*
+		 * XXX we wrap around correctly to the next entry as almost all
+		 * entries are 4 bytes in size. There is one entry which has 12
+		 * bytes which is a regular entry followed by 8 bytes data. ATM
+		 * I don't know how things are organized if were get next to the
+		 * a boundary so I worry about that once we try to handle that.
+		 */
+		evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE;
+		left -= 4;
+
+		dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(buf), 4);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
+{
+	struct dwc3			*dwc = _dwc;
+	int				i;
+	irqreturn_t			ret = IRQ_NONE;
+
+	spin_lock(&dwc->lock);
+
+	for (i = 0; i < DWC3_EVENT_BUFFERS_NUM; i++) {
+		irqreturn_t status;
+
+		status = dwc3_process_event_buf(dwc, i);
+		if (status == IRQ_HANDLED)
+			ret = status;
+	}
+
+	spin_unlock(&dwc->lock);
+
+	return ret;
+}
+
+/**
+ * dwc3_gadget_init - Initializes gadget related registers
+ * @dwc: Pointer to out controller context structure
+ *
+ * Returns 0 on success otherwise negative errno.
+ */
+int __devinit dwc3_gadget_init(struct dwc3 *dwc)
+{
+	u32					reg;
+	int					ret;
+	int					irq;
+
+	dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
+			&dwc->ctrl_req_addr, GFP_KERNEL);
+	if (!dwc->ctrl_req) {
+		dev_err(dwc->dev, "failed to allocate ctrl request\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	dwc->ep0_trb = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
+			&dwc->ep0_trb_addr, GFP_KERNEL);
+	if (!dwc->ep0_trb) {
+		dev_err(dwc->dev, "failed to allocate ep0 trb\n");
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	dwc->setup_buf = dma_alloc_coherent(dwc->dev,
+			sizeof(*dwc->setup_buf) * 2,
+			&dwc->setup_buf_addr, GFP_KERNEL);
+	if (!dwc->setup_buf) {
+		dev_err(dwc->dev, "failed to allocate setup buffer\n");
+		ret = -ENOMEM;
+		goto err2;
+	}
+
+	dev_set_name(&dwc->gadget.dev, "gadget");
+
+	dwc->gadget.ops			= &dwc3_gadget_ops;
+	dwc->gadget.is_dualspeed	= true;
+	dwc->gadget.speed		= USB_SPEED_UNKNOWN;
+	dwc->gadget.dev.parent		= dwc->dev;
+
+	dma_set_coherent_mask(&dwc->gadget.dev, dwc->dev->coherent_dma_mask);
+
+	dwc->gadget.dev.dma_parms	= dwc->dev->dma_parms;
+	dwc->gadget.dev.dma_mask	= dwc->dev->dma_mask;
+	dwc->gadget.dev.release		= dwc3_gadget_release;
+	dwc->gadget.name		= "dwc3-gadget";
+
+	/*
+	 * REVISIT: Here we should clear all pending IRQs to be
+	 * sure we're starting from a well known location.
+	 */
+
+	ret = dwc3_gadget_init_endpoints(dwc);
+	if (ret)
+		goto err3;
+
+	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
+
+	ret = request_irq(irq, dwc3_interrupt, IRQF_SHARED,
+			"dwc3", dwc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
+				irq, ret);
+		goto err4;
+	}
+
+	/* Enable all but Start and End of Frame IRQs */
+	reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN |
+			DWC3_DEVTEN_EVNTOVERFLOWEN |
+			DWC3_DEVTEN_CMDCMPLTEN |
+			DWC3_DEVTEN_ERRTICERREN |
+			DWC3_DEVTEN_WKUPEVTEN |
+			DWC3_DEVTEN_ULSTCNGEN |
+			DWC3_DEVTEN_CONNECTDONEEN |
+			DWC3_DEVTEN_USBRSTEN |
+			DWC3_DEVTEN_DISCONNEVTEN);
+	dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
+
+	ret = device_register(&dwc->gadget.dev);
+	if (ret) {
+		dev_err(dwc->dev, "failed to register gadget device\n");
+		put_device(&dwc->gadget.dev);
+		goto err5;
+	}
+
+	ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
+	if (ret) {
+		dev_err(dwc->dev, "failed to register udc\n");
+		goto err6;
+	}
+
+	return 0;
+
+err6:
+	device_unregister(&dwc->gadget.dev);
+
+err5:
+	dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
+	free_irq(irq, dwc);
+
+err4:
+	dwc3_gadget_free_endpoints(dwc);
+
+err3:
+	dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2,
+			dwc->setup_buf, dwc->setup_buf_addr);
+
+err2:
+	dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
+			dwc->ep0_trb, dwc->ep0_trb_addr);
+
+err1:
+	dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
+			dwc->ctrl_req, dwc->ctrl_req_addr);
+
+err0:
+	return ret;
+}
+
+void dwc3_gadget_exit(struct dwc3 *dwc)
+{
+	int			irq;
+	int			i;
+
+	usb_del_gadget_udc(&dwc->gadget);
+	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
+
+	dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
+	free_irq(irq, dwc);
+
+	for (i = 0; i < ARRAY_SIZE(dwc->eps); i++)
+		__dwc3_gadget_ep_disable(dwc->eps[i]);
+
+	dwc3_gadget_free_endpoints(dwc);
+
+	dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2,
+			dwc->setup_buf, dwc->setup_buf_addr);
+
+	dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
+			dwc->ep0_trb, dwc->ep0_trb_addr);
+
+	dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
+			dwc->ctrl_req, dwc->ctrl_req_addr);
+
+	device_unregister(&dwc->gadget.dev);
+}
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
new file mode 100644
index 000000000000..4809ac8d9a79
--- /dev/null
+++ b/drivers/usb/dwc3/gadget.h
@@ -0,0 +1,297 @@
+/**
+ * gadget.h - DesignWare USB3 DRD Gadget Header
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DRIVERS_USB_DWC3_GADGET_H
+#define __DRIVERS_USB_DWC3_GADGET_H
+
+#include <linux/list.h>
+#include <linux/usb/gadget.h>
+#include "io.h"
+
+struct dwc3;
+#define to_dwc3_ep(ep)		(container_of(ep, struct dwc3_ep, endpoint))
+#define gadget_to_dwc(g)	(container_of(g, struct dwc3, gadget))
+
+/**
+ * struct dwc3_gadget_ep_depcfg_param1 - DEPCMDPAR0 for DEPCFG command
+ * @interrupt_number: self-explanatory
+ * @reserved7_5: set to zero
+ * @xfer_complete_enable: event generated when transfer completed
+ * @xfer_in_progress_enable: event generated when transfer in progress
+ * @xfer_not_ready_enable: event generated when transfer not read
+ * @fifo_error_enable: generates events when FIFO Underrun (IN eps)
+ *	or FIFO Overrun (OUT) eps
+ * @reserved_12: set to zero
+ * @stream_event_enable: event generated on stream
+ * @reserved14_15: set to zero
+ * @binterval_m1: bInterval minus 1
+ * @stream_capable: this EP is capable of handling streams
+ * @ep_number: self-explanatory
+ * @bulk_based: Set to ‘1’ if this isochronous endpoint represents a bulk
+ *	data stream that ignores the relationship of bus time to the
+ *	intervals programmed in TRBs.
+ * @fifo_based: Set to ‘1’ if this isochronous endpoint represents a
+ *	FIFO-based data stream where TRBs have fixed values and are never
+ *	written back by the core.
+ */
+struct dwc3_gadget_ep_depcfg_param1 {
+	u32	interrupt_number:5;
+	u32	reserved7_5:3;		/* set to zero */
+	u32	xfer_complete_enable:1;
+	u32	xfer_in_progress_enable:1;
+	u32	xfer_not_ready_enable:1;
+	u32	fifo_error_enable:1;	/* IN-underrun, OUT-overrun */
+	u32	reserved12:1;		/* set to zero */
+	u32	stream_event_enable:1;
+	u32	reserved14_15:2;
+	u32	binterval_m1:8;		/* bInterval minus 1 */
+	u32	stream_capable:1;
+	u32	ep_number:5;
+	u32	bulk_based:1;
+	u32	fifo_based:1;
+} __packed;
+
+/**
+ * struct dwc3_gadget_ep_depcfg_param0 - Parameter 0 for DEPCFG
+ * @reserved0: set to zero
+ * @ep_type: Endpoint Type (control, bulk, iso, interrupt)
+ * @max_packet_size: max packet size in bytes
+ * @reserved16_14: set to zero
+ * @fifo_number: self-explanatory
+ * @burst_size: burst size minus 1
+ * @data_sequence_number: Must be 0 when an endpoint is initially configured
+ *	May be non-zero when an endpoint is configured after a power transition
+ *	that requires a save/restore.
+ * @ignore_sequence_number: Set to ‘1’ to avoid resetting the sequence
+ *	number. This setting is used by software to modify the DEPEVTEN
+ *	event enable bits without modifying other endpoint settings.
+ */
+struct dwc3_gadget_ep_depcfg_param0 {
+	u32	reserved0:1;
+	u32	ep_type:2;
+	u32	max_packet_size:11;
+	u32	reserved16_14:3;
+	u32	fifo_number:5;
+	u32	burst_size:4;
+	u32	data_sequence_number:5;
+	u32	ignore_sequence_number:1;
+} __packed;
+
+/**
+ * struct dwc3_gadget_ep_depxfercfg_param0 - Parameter 0 of DEPXFERCFG
+ * @number_xfer_resources: Defines the number of Transfer Resources allocated
+ *	to this endpoint.  This field must be set to 1.
+ * @reserved16_31: set to zero;
+ */
+struct dwc3_gadget_ep_depxfercfg_param0 {
+	u32		number_xfer_resources:16;
+	u32		reserved16_31:16;
+} __packed;
+
+/**
+ * struct dwc3_gadget_ep_depstrtxfer_param1 - Parameter 1 of DEPSTRTXFER
+ * @transfer_desc_addr_low: Indicates the lower 32 bits of the external
+ *	memory's start address for the transfer descriptor. Because TRBs
+ *	must be aligned to a 16-byte boundary, the lower 4 bits of this
+ *	address must be 0.
+ */
+struct dwc3_gadget_ep_depstrtxfer_param1 {
+	u32		transfer_desc_addr_low;
+} __packed;
+
+/**
+ * struct dwc3_gadget_ep_depstrtxfer_param1 - Parameter 1 of DEPSTRTXFER
+ * @transfer_desc_addr_high: Indicates the higher 32 bits of the external
+ *	memory’s start address for the transfer descriptor.
+ */
+struct dwc3_gadget_ep_depstrtxfer_param0 {
+	u32		transfer_desc_addr_high;
+} __packed;
+
+struct dwc3_gadget_ep_cmd_params {
+	union {
+		u32	raw;
+	} param2;
+
+	union {
+		u32	raw;
+		struct dwc3_gadget_ep_depcfg_param1 depcfg;
+		struct dwc3_gadget_ep_depstrtxfer_param1 depstrtxfer;
+	} param1;
+
+	union {
+		u32	raw;
+		struct dwc3_gadget_ep_depcfg_param0 depcfg;
+		struct dwc3_gadget_ep_depxfercfg_param0 depxfercfg;
+		struct dwc3_gadget_ep_depstrtxfer_param0 depstrtxfer;
+	} param0;
+} __packed;
+
+/* -------------------------------------------------------------------------- */
+
+struct dwc3_request {
+	struct usb_request	request;
+	struct list_head	list;
+	struct dwc3_ep		*dep;
+
+	u8			epnum;
+	struct dwc3_trb_hw	*trb;
+	dma_addr_t		trb_dma;
+
+	unsigned		direction:1;
+	unsigned		mapped:1;
+	unsigned		queued:1;
+};
+#define to_dwc3_request(r)	(container_of(r, struct dwc3_request, request))
+
+static inline struct dwc3_request *next_request(struct list_head *list)
+{
+	if (list_empty(list))
+		return NULL;
+
+	return list_first_entry(list, struct dwc3_request, list);
+}
+
+static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req)
+{
+	struct dwc3_ep		*dep = req->dep;
+
+	req->queued = true;
+	list_move_tail(&req->list, &dep->req_queued);
+}
+
+#if defined(CONFIG_USB_GADGET_DWC3) || defined(CONFIG_USB_GADGET_DWC3_MODULE)
+int dwc3_gadget_init(struct dwc3 *dwc);
+void dwc3_gadget_exit(struct dwc3 *dwc);
+#else
+static inline int dwc3_gadget_init(struct dwc3 *dwc) { return 0; }
+static inline void dwc3_gadget_exit(struct dwc3 *dwc) { }
+static inline int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
+		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
+{
+	return 0;
+}
+#endif
+
+void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
+		int status);
+
+void dwc3_ep0_interrupt(struct dwc3 *dwc, const struct dwc3_event_depevt *event);
+void dwc3_ep0_out_start(struct dwc3 *dwc);
+int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
+		gfp_t gfp_flags);
+int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value);
+int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
+		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params);
+void dwc3_map_buffer_to_dma(struct dwc3_request *req);
+void dwc3_unmap_buffer_from_dma(struct dwc3_request *req);
+
+/**
+ * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
+ * @dwc: DesignWare USB3 Pointer
+ * @number: DWC endpoint number
+ *
+ * Caller should take care of locking
+ */
+static inline u32 dwc3_gadget_ep_get_transfer_index(struct dwc3 *dwc, u8 number)
+{
+	u32			res_id;
+
+	res_id = dwc3_readl(dwc->regs, DWC3_DEPCMD(number));
+
+	return DWC3_DEPCMD_GET_RSC_IDX(res_id);
+}
+
+/**
+ * dwc3_gadget_event_string - returns event name
+ * @event: the event code
+ */
+static inline const char *dwc3_gadget_event_string(u8 event)
+{
+	switch (event) {
+	case DWC3_DEVICE_EVENT_DISCONNECT:
+		return "Disconnect";
+	case DWC3_DEVICE_EVENT_RESET:
+		return "Reset";
+	case DWC3_DEVICE_EVENT_CONNECT_DONE:
+		return "Connection Done";
+	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
+		return "Link Status Change";
+	case DWC3_DEVICE_EVENT_WAKEUP:
+		return "WakeUp";
+	case DWC3_DEVICE_EVENT_EOPF:
+		return "End-Of-Frame";
+	case DWC3_DEVICE_EVENT_SOF:
+		return "Start-Of-Frame";
+	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
+		return "Erratic Error";
+	case DWC3_DEVICE_EVENT_CMD_CMPL:
+		return "Command Complete";
+	case DWC3_DEVICE_EVENT_OVERFLOW:
+		return "Overflow";
+	}
+
+	return "UNKNOWN";
+}
+
+/**
+ * dwc3_ep_event_string - returns event name
+ * @event: then event code
+ */
+static inline const char *dwc3_ep_event_string(u8 event)
+{
+	switch (event) {
+	case DWC3_DEPEVT_XFERCOMPLETE:
+		return "Transfer Complete";
+	case DWC3_DEPEVT_XFERINPROGRESS:
+		return "Transfer In-Progress";
+	case DWC3_DEPEVT_XFERNOTREADY:
+		return "Transfer Not Ready";
+	case DWC3_DEPEVT_RXTXFIFOEVT:
+		return "FIFO";
+	case DWC3_DEPEVT_STREAMEVT:
+		return "Stream";
+	case DWC3_DEPEVT_EPCMDCMPLT:
+		return "Endpoint Command Complete";
+	}
+
+	return "UNKNOWN";
+}
+
+#endif /* __DRIVERS_USB_DWC3_GADGET_H */
diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h
new file mode 100644
index 000000000000..0c4e2a9b0b8c
--- /dev/null
+++ b/drivers/usb/dwc3/io.h
@@ -0,0 +1,55 @@
+/**
+ * io.h - DesignWare USB3 DRD IO Header
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DRIVERS_USB_DWC3_IO_H
+#define __DRIVERS_USB_DWC3_IO_H
+
+#include <asm/io.h>
+
+static inline u32 dwc3_readl(void __iomem *base, u32 offset)
+{
+	return readl(base + offset);
+}
+
+static inline void dwc3_writel(void __iomem *base, u32 offset, u32 value)
+{
+	writel(value, base + offset);
+}
+
+#endif /* __DRIVERS_USB_DWC3_IO_H */
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 5a084b9cfa3c..fe5637983892 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -255,12 +255,11 @@ config USB_S3C_HSOTG
 	  integrated into the S3C64XX series SoC.
 
 config USB_IMX
-	tristate "Freescale IMX USB Peripheral Controller"
-	depends on ARCH_MX1
+	tristate "Freescale i.MX1 USB Peripheral Controller"
+	depends on ARCH_MXC
 	help
-	   Freescale's IMX series include an integrated full speed
-	   USB 1.1 device controller.  The controller in the IMX series
-	   is register-compatible.
+	   Freescale's i.MX1 includes an integrated full speed
+	   USB 1.1 device controller.
 
 	   It has Six fixed-function endpoints, as well as endpoint
 	   zero (for control transfers).
@@ -303,6 +302,18 @@ config USB_PXA_U2O
 	  PXA9xx Processor series include a high speed USB2.0 device
 	  controller, which support high speed and full speed USB peripheral.
 
+config USB_GADGET_DWC3
+	tristate "DesignWare USB3.0 (DRD) Controller"
+	depends on USB_DWC3
+	select USB_GADGET_DUALSPEED
+	select USB_GADGET_SUPERSPEED
+	help
+	  DesignWare USB3.0 controller is a SuperSpeed USB3.0 Controller
+	  which can be configured for peripheral-only, host-only, hub-only
+	  and Dual-Role operation. This Controller was first integrated into
+	  the OMAP5 series of processors. More information about the OMAP5
+	  version of this controller, refer to http://www.ti.com/omap5.
+
 #
 # Controllers available in both integrated and discrete versions
 #
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 70f2b376c86d..d65d8392be75 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -354,7 +354,7 @@ udc_ep_enable(struct usb_ep *usbep, const struct usb_endpoint_descriptor *desc)
 	writel(tmp, &dev->ep[ep->num].regs->ctl);
 
 	/* set max packet size */
-	maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	maxpacket = usb_endpoint_maxp(desc);
 	tmp = readl(&dev->ep[ep->num].regs->bufout_maxpkt);
 	tmp = AMD_ADDBITS(tmp, maxpacket, UDC_EP_MAX_PKT_SIZE);
 	ep->ep.maxpacket = maxpacket;
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index ddb118a76807..d01fa5badd66 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -487,7 +487,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
 			|| !desc || ep->desc
 			|| _ep->name == ep0name
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
-			|| (maxpacket = le16_to_cpu(desc->wMaxPacketSize)) == 0
+			|| (maxpacket = usb_endpoint_maxp(desc)) == 0
 			|| maxpacket > ep->maxpacket) {
 		DBG("bad ep or descriptor\n");
 		return -EINVAL;
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 5b1665eb1bef..722c468e9b3c 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -527,7 +527,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 
 	DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc);
 
-	maxpacket = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff;
+	maxpacket = usb_endpoint_maxp(desc) & 0x7ff;
 
 	if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index)
 			|| ep->index == 0
@@ -571,7 +571,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 		 * Bits 11:12 specify number of _additional_
 		 * transactions per microframe.
 		 */
-		nr_trans = ((le16_to_cpu(desc->wMaxPacketSize) >> 11) & 3) + 1;
+		nr_trans = ((usb_endpoint_maxp(desc) >> 11) & 3) + 1;
 		if (nr_trans > 3)
 			return -EINVAL;
 
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 1265a8502ea0..83428f56253b 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -2101,7 +2101,7 @@ static int ep_enable(struct usb_ep *ep,
 	mEp->num  = usb_endpoint_num(desc);
 	mEp->type = usb_endpoint_type(desc);
 
-	mEp->ep.maxpacket = __constant_le16_to_cpu(desc->wMaxPacketSize);
+	mEp->ep.maxpacket = usb_endpoint_maxp(desc);
 
 	dbg_event(_usb_addr(mEp), "ENABLE", 0);
 
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index aef47414f5d5..8065464523b1 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -164,7 +164,7 @@ int config_ep_by_speed(struct usb_gadget *g,
 
 ep_found:
 	/* commit results */
-	_ep->maxpacket = le16_to_cpu(chosen_desc->wMaxPacketSize);
+	_ep->maxpacket = usb_endpoint_maxp(chosen_desc);
 	_ep->desc = chosen_desc;
 	_ep->comp_desc = NULL;
 	_ep->maxburst = 0;
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index e755a9d267fc..7b06d39d6203 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -439,7 +439,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	 * maximum packet size.
 	 * For SS devices the wMaxPacketSize is limited by 1024.
 	 */
-	max = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff;
+	max = usb_endpoint_maxp(desc) & 0x7ff;
 
 	/* drivers must not request bad settings, since lower levels
 	 * (hardware or its drivers) may not check.  some endpoints
@@ -1277,7 +1277,7 @@ static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep)
 		int	tmp;
 
 		/* high bandwidth mode */
-		tmp = le16_to_cpu(ep->desc->wMaxPacketSize);
+		tmp = usb_endpoint_maxp(ep->desc);
 		tmp = (tmp >> 11) & 0x03;
 		tmp *= 8 /* applies to entire frame */;
 		limit += limit * tmp;
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 7a7e6b7e1fd6..cdca7ebb7b48 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -158,7 +158,7 @@ ep_matches (
 	 * where it's an output parameter representing the full speed limit.
 	 * the usb spec fixes high speed bulk maxpacket at 512 bytes.
 	 */
-	max = 0x7ff & le16_to_cpu(desc->wMaxPacketSize);
+	max = 0x7ff & usb_endpoint_maxp(desc);
 	switch (type) {
 	case USB_ENDPOINT_XFER_INT:
 		/* INT:  limit 64 bytes full speed, 1024 high/super speed */
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 5b9339582007..4ce3decda1db 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -2401,8 +2401,7 @@ reset:
 		goto reset;
 	fsg->bulk_out->driver_data = common;
 	fsg->bulk_out_enabled = 1;
-	common->bulk_out_maxpacket =
-		le16_to_cpu(fsg->bulk_out->desc->wMaxPacketSize);
+	common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc);
 	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
 
 	/* Allocate the requests */
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 639e14a2fd15..39ece40a045f 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -2801,7 +2801,7 @@ reset:
 	if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0)
 		goto reset;
 	fsg->bulk_out_enabled = 1;
-	fsg->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
+	fsg->bulk_out_maxpacket = usb_endpoint_maxp(d);
 	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
 
 	if (transport_is_cbi()) {
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 3bf872e1ad39..2a03e4de11c1 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -540,7 +540,7 @@ static int qe_ep_init(struct qe_udc *udc,
 	int reval = 0;
 	u16 max = 0;
 
-	max = le16_to_cpu(desc->wMaxPacketSize);
+	max = usb_endpoint_maxp(desc);
 
 	/* check the max package size validate for this endpoint */
 	/* Refer to USB2.0 spec table 9-13,
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index de24a4233c25..d6993507165b 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -559,7 +559,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
 	if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN))
 		return -ESHUTDOWN;
 
-	max = le16_to_cpu(desc->wMaxPacketSize);
+	max = usb_endpoint_maxp(desc);
 
 	/* Disable automatic zlp generation.  Driver is responsible to indicate
 	 * explicitly through req->req.zero.  This is needed to enable multi-td
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index 4ec888f90002..d9ee6c37a6c1 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -220,7 +220,7 @@ static int config_ep(struct fusb300_ep *ep,
 
 	info.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
 	info.dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0;
-	info.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	info.maxpacket = usb_endpoint_maxp(desc);
 	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
 
 	if ((info.type == USB_ENDPOINT_XFER_INT) ||
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index f3a83cd0ef50..a8855d0b7f3b 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -31,6 +31,7 @@
 #define gadget_is_ci13xxx_msm(g)	(!strcmp("ci13xxx_msm", (g)->name))
 #define gadget_is_ci13xxx_pci(g)	(!strcmp("ci13xxx_pci", (g)->name))
 #define gadget_is_dummy(g)		(!strcmp("dummy_udc", (g)->name))
+#define gadget_is_dwc3(g)		(!strcmp("dwc3-gadget", (g)->name))
 #define gadget_is_fsl_qe(g)		(!strcmp("fsl_qe_udc", (g)->name))
 #define gadget_is_fsl_usb2(g)		(!strcmp("fsl-usb2-udc", (g)->name))
 #define gadget_is_goku(g)		(!strcmp("goku_udc", (g)->name))
@@ -115,6 +116,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x30;
 	else if (gadget_is_net2272(gadget))
 		return 0x31;
+	else if (gadget_is_dwc3(gadget))
+		return 0x32;
 
 	return -ENOENT;
 }
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 692fd9b2248b..bf08bfcd90b8 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -689,7 +689,7 @@ static int imx_ep_enable(struct usb_ep *usb_ep,
 		return -EINVAL;
 	}
 
-	if (imx_ep->fifosize < le16_to_cpu(desc->wMaxPacketSize)) {
+	if (imx_ep->fifosize < usb_endpoint_maxp(desc)) {
 		D_ERR(imx_usb->dev,
 			"<%s> bad %s maxpacket\n", __func__, usb_ep->name);
 		return -ERANGE;
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index a06e2c27b435..5bf9942eb454 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -283,7 +283,7 @@ static int langwell_ep_enable(struct usb_ep *_ep,
 	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
 
-	max = le16_to_cpu(desc->wMaxPacketSize);
+	max = usb_endpoint_maxp(desc);
 
 	/*
 	 * disable HW zero length termination select
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 491f825ed5c9..5e597c3c44f3 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -370,7 +370,7 @@ static void m66592_ep_setting(struct m66592 *m66592, struct m66592_ep *ep,
 
 	ep->pipectr = get_pipectr_addr(pipenum);
 	ep->pipenum = pipenum;
-	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	ep->ep.maxpacket = usb_endpoint_maxp(desc);
 	m66592->pipenum2ep[pipenum] = ep;
 	m66592->epaddr2ep[desc->bEndpointAddress&USB_ENDPOINT_NUMBER_MASK] = ep;
 	INIT_LIST_HEAD(&ep->queue);
@@ -447,7 +447,7 @@ static int alloc_pipe_config(struct m66592_ep *ep,
 	ep->type = info.type;
 
 	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-	info.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	info.maxpacket = usb_endpoint_maxp(desc);
 	info.interval = desc->bInterval;
 	if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
 		info.dir_in = 1;
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index ce1ac2bcb314..263dec40af32 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -493,7 +493,7 @@ static int mv_ep_enable(struct usb_ep *_ep,
 		return -ESHUTDOWN;
 
 	direction = ep_dir(ep);
-	max = le16_to_cpu(desc->wMaxPacketSize);
+	max = usb_endpoint_maxp(desc);
 
 	/*
 	 * disable HW zero length termination select
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
index ab98ea926a11..6fef1c02448e 100644
--- a/drivers/usb/gadget/net2272.c
+++ b/drivers/usb/gadget/net2272.c
@@ -204,7 +204,7 @@ net2272_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
 
-	max = le16_to_cpu(desc->wMaxPacketSize) & 0x1fff;
+	max = usb_endpoint_maxp(desc) & 0x1fff;
 
 	spin_lock_irqsave(&dev->lock, flags);
 	_ep->maxpacket = max & 0x7fff;
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 3dd40b4e675c..8d3673fadfe1 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -169,7 +169,7 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 		return -EDOM;
 
 	/* sanity check ep-e/ep-f since their fifos are small */
-	max = le16_to_cpu (desc->wMaxPacketSize) & 0x1fff;
+	max = usb_endpoint_maxp (desc) & 0x1fff;
 	if (ep->num > 4 && max > 64)
 		return -ERANGE;
 
@@ -1640,7 +1640,7 @@ show_queues (struct device *_dev, struct device_attribute *attr, char *buf)
 				 default:
 					val = "iso"; break;
 				 }; val; }),
-				le16_to_cpu (d->wMaxPacketSize) & 0x1fff,
+				usb_endpoint_maxp (d) & 0x1fff,
 				ep->dma ? "dma" : "pio", ep->fifo_size
 				);
 		} else /* ep0 should only have one transfer queued */
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 740c7daed279..b7a7799ddd4f 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -166,15 +166,14 @@ static int omap_ep_enable(struct usb_ep *_ep,
 	if (!_ep || !desc || ep->desc
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
 			|| ep->bEndpointAddress != desc->bEndpointAddress
-			|| ep->maxpacket < le16_to_cpu
-						(desc->wMaxPacketSize)) {
+			|| ep->maxpacket < usb_endpoint_maxp(desc)) {
 		DBG("%s, bad ep or descriptor\n", __func__);
 		return -EINVAL;
 	}
-	maxp = le16_to_cpu (desc->wMaxPacketSize);
+	maxp = usb_endpoint_maxp(desc);
 	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
 				&& maxp != ep->maxpacket)
-			|| le16_to_cpu(desc->wMaxPacketSize) > ep->maxpacket
+			|| usb_endpoint_maxp(desc) > ep->maxpacket
 			|| !desc->wMaxPacketSize) {
 		DBG("%s, bad %s maxpacket\n", __func__, _ep->name);
 		return -ERANGE;
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index f96615ab6b77..b69ae3eec687 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -947,7 +947,7 @@ static void pch_udc_ep_enable(struct pch_udc_ep *ep,
 	else
 		buff_size = UDC_EPOUT_BUFF_SIZE;
 	pch_udc_ep_set_bufsz(ep, buff_size, ep->in);
-	pch_udc_ep_set_maxpkt(ep, le16_to_cpu(desc->wMaxPacketSize));
+	pch_udc_ep_set_maxpkt(ep, usb_endpoint_maxp(desc));
 	pch_udc_ep_set_nak(ep);
 	pch_udc_ep_fifo_flush(ep, ep->in);
 	/* Configure the endpoint */
@@ -957,7 +957,7 @@ static void pch_udc_ep_enable(struct pch_udc_ep *ep,
 	      (cfg->cur_cfg << UDC_CSR_NE_CFG_SHIFT) |
 	      (cfg->cur_intf << UDC_CSR_NE_INTF_SHIFT) |
 	      (cfg->cur_alt << UDC_CSR_NE_ALT_SHIFT) |
-	      le16_to_cpu(desc->wMaxPacketSize) << UDC_CSR_NE_MAX_PKT_SHIFT;
+	      usb_endpoint_maxp(desc) << UDC_CSR_NE_MAX_PKT_SHIFT;
 
 	if (ep->in)
 		pch_udc_write_csr(ep->dev, val, UDC_EPIN_IDX(ep->num));
@@ -1466,7 +1466,7 @@ static int pch_udc_pcd_ep_enable(struct usb_ep *usbep,
 	ep->desc = desc;
 	ep->halted = 0;
 	pch_udc_ep_enable(ep, &ep->dev->cfg_data, desc);
-	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	ep->ep.maxpacket = usb_endpoint_maxp(desc);
 	pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
 	spin_unlock_irqrestore(&dev->lock, iflags);
 	return 0;
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index e4e59b4de25d..7862465291d1 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -232,8 +232,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep,
 	if (!_ep || !desc || ep->desc || _ep->name == ep0name
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
 			|| ep->bEndpointAddress != desc->bEndpointAddress
-			|| ep->fifo_size < le16_to_cpu
-						(desc->wMaxPacketSize)) {
+			|| ep->fifo_size < usb_endpoint_maxp (desc)) {
 		DMSG("%s, bad ep or descriptor\n", __func__);
 		return -EINVAL;
 	}
@@ -248,7 +247,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep,
 
 	/* hardware _could_ do smaller, but driver doesn't */
 	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
-				&& le16_to_cpu (desc->wMaxPacketSize)
+				&& usb_endpoint_maxp (desc)
 						!= BULK_FIFO_SIZE)
 			|| !desc->wMaxPacketSize) {
 		DMSG("%s, bad %s maxpacket\n", __func__, _ep->name);
@@ -264,7 +263,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep,
 	ep->desc = desc;
 	ep->stopped = 0;
 	ep->pio_irqs = 0;
-	ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize);
+	ep->ep.maxpacket = usb_endpoint_maxp (desc);
 
 	/* flush fifo (mostly for OUT buffers) */
 	pxa25x_ep_fifo_flush (_ep);
@@ -401,7 +400,7 @@ write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 {
 	unsigned		max;
 
-	max = le16_to_cpu(ep->desc->wMaxPacketSize);
+	max = usb_endpoint_maxp(ep->desc);
 	do {
 		unsigned	count;
 		int		is_last, is_short;
@@ -671,8 +670,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	 * we can report per-packet status.  that also helps with dma.
 	 */
 	if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
-			&& req->req.length > le16_to_cpu
-						(ep->desc->wMaxPacketSize)))
+		        && req->req.length > usb_endpoint_maxp (ep->desc)))
 		return -EMSGSIZE;
 
 	DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n",
@@ -1105,7 +1103,7 @@ udc_seq_show(struct seq_file *m, void *_d)
 			tmp = *dev->ep [i].reg_udccs;
 			seq_printf(m,
 				"%s max %d %s udccs %02x irqs %lu\n",
-				ep->ep.name, le16_to_cpu(desc->wMaxPacketSize),
+				ep->ep.name, usb_endpoint_maxp(desc),
 				"pio", tmp, ep->pio_irqs);
 			/* TODO translate all five groups of udccs bits! */
 
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 85b68c75dc9d..d21455f457e2 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1439,7 +1439,7 @@ static int pxa_ep_enable(struct usb_ep *_ep,
 		return -EINVAL;
 	}
 
-	if (ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) {
+	if (ep->fifo_size < usb_endpoint_maxp(desc)) {
 		ep_err(ep, "bad maxpacket\n");
 		return -ERANGE;
 	}
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 50991e5bd5e8..61d0c65802e8 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -341,7 +341,7 @@ static void r8a66597_ep_setting(struct r8a66597 *r8a66597,
 
 	ep->pipectr = get_pipectr_addr(pipenum);
 	ep->pipenum = pipenum;
-	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	ep->ep.maxpacket = usb_endpoint_maxp(desc);
 	r8a66597->pipenum2ep[pipenum] = ep;
 	r8a66597->epaddr2ep[desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK]
 		= ep;
@@ -420,7 +420,7 @@ static int alloc_pipe_config(struct r8a66597_ep *ep,
 	ep->type = info.type;
 
 	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-	info.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	info.maxpacket = usb_endpoint_maxp(desc);
 	info.interval = desc->bInterval;
 	if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
 		info.dir_in = 1;
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 8bdee67ce09a..39b134dec94c 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2297,7 +2297,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 		return -EINVAL;
 	}
 
-	mps = le16_to_cpu(desc->wMaxPacketSize);
+	mps = usb_endpoint_maxp(desc);
 
 	/* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */
 
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index 3fa717c5f4bc..25829b4398da 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -26,6 +26,7 @@
 #include <linux/clk.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
 #include <linux/prefetch.h>
 
 #include <mach/regs-s3c2443-clock.h>
@@ -137,6 +138,7 @@ struct s3c_hsudc {
 	struct usb_gadget_driver *driver;
 	struct device *dev;
 	struct s3c24xx_hsudc_platdata *pd;
+	struct otg_transceiver *transceiver;
 	spinlock_t lock;
 	void __iomem *regs;
 	struct resource *mem_rsrc;
@@ -759,11 +761,11 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep,
 	if (!_ep || !desc || hsep->desc || _ep->name == ep0name
 		|| desc->bDescriptorType != USB_DT_ENDPOINT
 		|| hsep->bEndpointAddress != desc->bEndpointAddress
-		|| ep_maxpacket(hsep) < le16_to_cpu(desc->wMaxPacketSize))
+		|| ep_maxpacket(hsep) < usb_endpoint_maxp(desc))
 		return -EINVAL;
 
 	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
-		&& le16_to_cpu(desc->wMaxPacketSize) != ep_maxpacket(hsep))
+		&& usb_endpoint_maxp(desc) != ep_maxpacket(hsep))
 		|| !desc->wMaxPacketSize)
 		return -ERANGE;
 
@@ -779,7 +781,7 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep,
 
 	hsep->stopped = hsep->wedge = 0;
 	hsep->desc = desc;
-	hsep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	hsep->ep.maxpacket = usb_endpoint_maxp(desc);
 
 	s3c_hsudc_set_halt(_ep, 0);
 	__set_bit(ep_index(hsep), hsudc->regs + S3C_EIER);
@@ -1171,6 +1173,22 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
 		return ret;
 	}
 
+	/* connect to bus through transceiver */
+	if (hsudc->transceiver) {
+		ret = otg_set_peripheral(hsudc->transceiver, &hsudc->gadget);
+		if (ret) {
+			dev_err(hsudc->dev, "%s: can't bind to transceiver\n",
+					hsudc->gadget.name);
+			driver->unbind(&hsudc->gadget);
+
+			device_del(&hsudc->gadget.dev);
+
+			hsudc->driver = NULL;
+			hsudc->gadget.dev.driver = NULL;
+			return ret;
+		}
+	}
+
 	enable_irq(hsudc->irq);
 	dev_info(hsudc->dev, "bound driver %s\n", driver->driver.name);
 
@@ -1201,6 +1219,9 @@ static int s3c_hsudc_stop(struct usb_gadget_driver *driver)
 	s3c_hsudc_stop_activity(hsudc, driver);
 	spin_unlock_irqrestore(&hsudc->lock, flags);
 
+	if (hsudc->transceiver)
+		(void) otg_set_peripheral(hsudc->transceiver, NULL);
+
 	driver->unbind(&hsudc->gadget);
 	device_del(&hsudc->gadget.dev);
 	disable_irq(hsudc->irq);
@@ -1247,6 +1268,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 	hsudc->dev = dev;
 	hsudc->pd = pdev->dev.platform_data;
 
+	hsudc->transceiver = otg_get_transceiver();
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(dev, "unable to obtain driver resource data\n");
@@ -1269,19 +1292,6 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 		goto err_remap;
 	}
 
-	ret = platform_get_irq(pdev, 0);
-	if (ret < 0) {
-		dev_err(dev, "unable to obtain IRQ number\n");
-		goto err_irq;
-	}
-	hsudc->irq = ret;
-
-	ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc);
-	if (ret < 0) {
-		dev_err(dev, "irq request failed\n");
-		goto err_irq;
-	}
-
 	spin_lock_init(&hsudc->lock);
 
 	device_initialize(&hsudc->gadget.dev);
@@ -1299,6 +1309,19 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 
 	s3c_hsudc_setup_ep(hsudc);
 
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
+		dev_err(dev, "unable to obtain IRQ number\n");
+		goto err_irq;
+	}
+	hsudc->irq = ret;
+
+	ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc);
+	if (ret < 0) {
+		dev_err(dev, "irq request failed\n");
+		goto err_irq;
+	}
+
 	hsudc->uclk = clk_get(&pdev->dev, "usb-device");
 	if (IS_ERR(hsudc->uclk)) {
 		dev_err(dev, "failed to find usb-device clock source\n");
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 8d31848aab09..257285448678 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1082,7 +1082,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep,
 	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
 
-	max = le16_to_cpu(desc->wMaxPacketSize) & 0x1fff;
+	max = usb_endpoint_maxp(desc) & 0x1fff;
 
 	local_irq_save (flags);
 	_ep->maxpacket = max & 0x7ff;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index ab085f12d570..13e1f672926d 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -544,11 +544,11 @@ config USB_HWA_HCD
 	  will be called "hwa-hc".
 
 config USB_IMX21_HCD
-       tristate "iMX21 HCD support"
-       depends on USB && ARM && MACH_MX21
+       tristate "i.MX21 HCD support"
+       depends on USB && ARM && ARCH_MXC
        help
          This driver enables support for the on-chip USB host in the
-         iMX21 processor.
+         i.MX21 processor.
 
          To compile this driver as a module, choose M here: the
          module will be called "imx21-hcd".
@@ -578,3 +578,10 @@ config USB_OCTEON_OHCI
 config USB_OCTEON2_COMMON
 	bool
 	default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
+
+config USB_PXA168_EHCI
+	bool "Marvell PXA168 on-chip EHCI HCD support"
+	depends on USB_EHCI_HCD && ARCH_MMP
+	help
+	  Enable support for Marvell PXA168 SoC's on-chip EHCI
+	  host controller
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 42ae57409908..4363fea85151 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -293,7 +293,7 @@ static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
 	/* here we "know" root ports should always stay powered */
 	ehci_port_power(ehci, 1);
 
-	hcd->state = HC_STATE_SUSPENDED;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
 
 	return 0;
 }
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 40a844c1dbb4..9952505d2357 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -697,6 +697,19 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
 }
 #undef DBG_SCHED_LIMIT
 
+static const char *rh_state_string(struct ehci_hcd *ehci)
+{
+	switch (ehci->rh_state) {
+	case EHCI_RH_HALTED:
+		return "halted";
+	case EHCI_RH_SUSPENDED:
+		return "suspended";
+	case EHCI_RH_RUNNING:
+		return "running";
+	}
+	return "?";
+}
+
 static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 {
 	struct usb_hcd		*hcd;
@@ -730,11 +743,11 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 	temp = scnprintf (next, size,
 		"bus %s, device %s\n"
 		"%s\n"
-		"EHCI %x.%02x, hcd state %d\n",
+		"EHCI %x.%02x, rh state %s\n",
 		hcd->self.controller->bus->name,
 		dev_name(hcd->self.controller),
 		hcd->product_desc,
-		i >> 8, i & 0x0ff, hcd->state);
+		i >> 8, i & 0x0ff, rh_state_string(ehci));
 	size -= temp;
 	next += temp;
 
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 34a3140d1e5f..3bf9f16b4fd8 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -392,7 +392,7 @@ static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
 
 	dev_dbg(dev, "suspending...\n");
 
-	hcd->state = HC_STATE_SUSPENDED;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
 	dev->power.power_state = PMSG_SUSPEND;
 
 	/* ignore non-host interrupts */
@@ -481,7 +481,7 @@ static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
 	ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
 
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-	hcd->state = HC_STATE_RUNNING;
+	ehci->rh_state = EHCI_RH_RUNNING;
 	dev->power.power_state = PMSG_ON;
 
 	tmp = ehci_readl(ehci, &ehci->regs->command);
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index f72ae0b6ee7f..8696489cde56 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -238,7 +238,7 @@ static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
 	error = handshake(ehci, ptr, mask, done, usec);
 	if (error) {
 		ehci_halt(ehci);
-		ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+		ehci->rh_state = EHCI_RH_HALTED;
 		ehci_err(ehci, "force halt; handshake %p %08x %08x -> %d\n",
 			ptr, mask, done, error);
 	}
@@ -278,7 +278,7 @@ static int ehci_reset (struct ehci_hcd *ehci)
 	command |= CMD_RESET;
 	dbg_cmd (ehci, "reset", command);
 	ehci_writel(ehci, command, &ehci->regs->command);
-	ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+	ehci->rh_state = EHCI_RH_HALTED;
 	ehci->next_statechange = jiffies;
 	retval = handshake (ehci, &ehci->regs->command,
 			    CMD_RESET, 0, 250 * 1000);
@@ -307,7 +307,7 @@ static void ehci_quiesce (struct ehci_hcd *ehci)
 	u32	temp;
 
 #ifdef DEBUG
-	if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
+	if (ehci->rh_state != EHCI_RH_RUNNING)
 		BUG ();
 #endif
 
@@ -356,7 +356,7 @@ static void ehci_iaa_watchdog(unsigned long param)
 	 */
 	if (ehci->reclaim
 			&& !timer_pending(&ehci->iaa_watchdog)
-			&& HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
+			&& ehci->rh_state == EHCI_RH_RUNNING) {
 		u32 cmd, status;
 
 		/* If we get here, IAA is *REALLY* late.  It's barely
@@ -496,7 +496,7 @@ static void ehci_work (struct ehci_hcd *ehci)
 	 * misplace IRQs, and should let us run completely without IRQs.
 	 * such lossage has been observed on both VT6202 and VT8235.
 	 */
-	if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) &&
+	if (ehci->rh_state == EHCI_RH_RUNNING &&
 			(ehci->async->qh_next.ptr != NULL ||
 			 ehci->periodic_sched != 0))
 		timer_action (ehci, TIMER_IO_WATCHDOG);
@@ -516,7 +516,7 @@ static void ehci_stop (struct usb_hcd *hcd)
 	del_timer_sync(&ehci->iaa_watchdog);
 
 	spin_lock_irq(&ehci->lock);
-	if (HC_IS_RUNNING (hcd->state))
+	if (ehci->rh_state == EHCI_RH_RUNNING)
 		ehci_quiesce (ehci);
 
 	ehci_silence_controller(ehci);
@@ -741,7 +741,7 @@ static int ehci_run (struct usb_hcd *hcd)
 	 * be started before the port switching actions could complete.
 	 */
 	down_write(&ehci_cf_port_reset_rwsem);
-	hcd->state = HC_STATE_RUNNING;
+	ehci->rh_state = EHCI_RH_RUNNING;
 	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
 	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
 	msleep(5);
@@ -788,7 +788,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 
 	/* Shared IRQ? */
 	masked_status = status & INTR_MASK;
-	if (!masked_status || unlikely(hcd->state == HC_STATE_HALT)) {
+	if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) {
 		spin_unlock(&ehci->lock);
 		return IRQ_NONE;
 	}
@@ -952,7 +952,7 @@ static int ehci_urb_enqueue (
 static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 {
 	/* failfast */
-	if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state) && ehci->reclaim)
+	if (ehci->rh_state != EHCI_RH_RUNNING && ehci->reclaim)
 		end_unlink_async(ehci);
 
 	/* If the QH isn't linked then there's nothing we can do
@@ -1079,7 +1079,7 @@ rescan:
 		goto idle_timeout;
 	}
 
-	if (!HC_IS_RUNNING (hcd->state))
+	if (ehci->rh_state != EHCI_RH_RUNNING)
 		qh->qh_state = QH_STATE_IDLE;
 	switch (qh->qh_state) {
 	case QH_STATE_LINKED:
@@ -1291,6 +1291,16 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_grlib_driver
 #endif
 
+#ifdef CONFIG_USB_PXA168_EHCI
+#include "ehci-pxa168.c"
+#define PLATFORM_DRIVER		ehci_pxa168_driver
+#endif
+
+#ifdef CONFIG_NLM_XLR
+#include "ehci-xls.c"
+#define PLATFORM_DRIVER		ehci_xls_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
     !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 4c32cb19b405..77bbb2357e47 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -236,10 +236,8 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	}
 
 	/* stop schedules, clean any completed work */
-	if (HC_IS_RUNNING(hcd->state)) {
+	if (ehci->rh_state == EHCI_RH_RUNNING)
 		ehci_quiesce (ehci);
-		hcd->state = HC_STATE_QUIESCING;
-	}
 	ehci->command = ehci_readl(ehci, &ehci->regs->command);
 	ehci_work(ehci);
 
@@ -313,7 +311,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 
 	/* turn off now-idle HC */
 	ehci_halt (ehci);
-	hcd->state = HC_STATE_SUSPENDED;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
 
 	if (ehci->reclaim)
 		end_unlink_async(ehci);
@@ -382,6 +380,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 
 	/* restore CMD_RUN, framelist size, and irq threshold */
 	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	ehci->rh_state = EHCI_RH_RUNNING;
 
 	/* Some controller/firmware combinations need a delay during which
 	 * they set up the port statuses.  See Bugzilla #8190. */
@@ -451,7 +450,6 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 	}
 
 	ehci->next_statechange = jiffies + msecs_to_jiffies(5);
-	hcd->state = HC_STATE_RUNNING;
 
 	/* Now we can safely re-enable irqs */
 	ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
@@ -563,7 +561,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 	u32		ppcd = 0;
 
 	/* if !USB_SUSPEND, root hub timers won't get shut down ... */
-	if (!HC_IS_RUNNING(hcd->state))
+	if (ehci->rh_state != EHCI_RH_RUNNING)
 		return 0;
 
 	/* init status to no-changes */
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 1102ce65a3a9..8311de7c0a75 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -439,7 +439,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 	/* here we "know" root ports should always stay powered */
 	ehci_port_power(ehci, 1);
 
-	hcd->state = HC_STATE_SUSPENDED;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
 	return 0;
 }
 #endif
diff --git a/drivers/usb/host/ehci-pxa168.c b/drivers/usb/host/ehci-pxa168.c
new file mode 100644
index 000000000000..ac0c16e8f539
--- /dev/null
+++ b/drivers/usb/host/ehci-pxa168.c
@@ -0,0 +1,363 @@
+/*
+ * drivers/usb/host/ehci-pxa168.c
+ *
+ * Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
+ *
+ * Based on drivers/usb/host/ehci-orion.c
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <mach/pxa168.h>
+
+#define USB_PHY_CTRL_REG 0x4
+#define USB_PHY_PLL_REG  0x8
+#define USB_PHY_TX_REG   0xc
+
+#define FBDIV_SHIFT      4
+
+#define ICP_SHIFT        12
+#define ICP_15            2
+#define ICP_20            3
+#define ICP_25            4
+
+#define KVCO_SHIFT       15
+
+#define PLLCALI12_SHIFT  25
+#define CALI12_VDD        0
+#define CALI12_09         1
+#define CALI12_10         2
+#define CALI12_11         3
+
+#define PLLVDD12_SHIFT   27
+#define VDD12_VDD         0
+#define VDD12_10          1
+#define VDD12_11          2
+#define VDD12_12          3
+
+#define PLLVDD18_SHIFT   29
+#define VDD18_19          0
+#define VDD18_20          1
+#define VDD18_21          2
+#define VDD18_22          3
+
+
+#define PLL_READY        (1 << 23)
+#define VCOCAL_START     (1 << 21)
+#define REG_RCAL_START   (1 << 12)
+
+struct pxa168_usb_drv_data {
+	struct ehci_hcd ehci;
+	struct clk	*pxa168_usb_clk;
+	struct resource	*usb_phy_res;
+	void __iomem	*usb_phy_reg_base;
+};
+
+static int ehci_pxa168_setup(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+
+	ehci_reset(ehci);
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	/*
+	 * data structure init
+	 */
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	hcd->has_tt = 1;
+
+	ehci_port_power(ehci, 0);
+
+	return retval;
+}
+
+static const struct hc_driver ehci_pxa168_hc_driver = {
+	.description = hcd_name,
+	.product_desc = "Marvell PXA168 EHCI",
+	.hcd_priv_size = sizeof(struct pxa168_usb_drv_data),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq = ehci_irq,
+	.flags = HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset = ehci_pxa168_setup,
+	.start = ehci_run,
+	.stop = ehci_stop,
+	.shutdown = ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue = ehci_urb_enqueue,
+	.urb_dequeue = ehci_urb_dequeue,
+	.endpoint_disable = ehci_endpoint_disable,
+	.endpoint_reset = ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number = ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data = ehci_hub_status_data,
+	.hub_control = ehci_hub_control,
+	.bus_suspend = ehci_bus_suspend,
+	.bus_resume = ehci_bus_resume,
+	.relinquish_port = ehci_relinquish_port,
+	.port_handed_over = ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int pxa168_usb_phy_init(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *usb_phy_reg_base;
+	struct pxa168_usb_pdata *pdata;
+	struct pxa168_usb_drv_data *drv_data;
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	unsigned long reg_val;
+	int pll_retry_cont = 10000, err = 0;
+
+	drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv;
+	pdata = (struct pxa168_usb_pdata *)pdev->dev.platform_data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Found HC with no PHY register addr. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res),
+				ehci_pxa168_hc_driver.description)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		return -EBUSY;
+	}
+
+	usb_phy_reg_base = ioremap(res->start, resource_size(res));
+	if (usb_phy_reg_base == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		err = -EFAULT;
+		goto err1;
+	}
+	drv_data->usb_phy_reg_base = usb_phy_reg_base;
+	drv_data->usb_phy_res = res;
+
+	/* If someone wants to init USB phy in board specific way */
+	if (pdata && pdata->phy_init)
+		return pdata->phy_init(usb_phy_reg_base);
+
+	/* Power up the PHY and PLL */
+	writel(readl(usb_phy_reg_base + USB_PHY_CTRL_REG) | 0x3,
+		usb_phy_reg_base + USB_PHY_CTRL_REG);
+
+	/* Configure PHY PLL */
+	reg_val = readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~(0x7e03ffff);
+	reg_val |= (VDD18_22 << PLLVDD18_SHIFT | VDD12_12 << PLLVDD12_SHIFT |
+		CALI12_11 << PLLCALI12_SHIFT | 3 << KVCO_SHIFT |
+		ICP_15 << ICP_SHIFT | 0xee << FBDIV_SHIFT | 0xb);
+	writel(reg_val, usb_phy_reg_base + USB_PHY_PLL_REG);
+
+	/* Make sure PHY PLL is ready */
+	while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) {
+		if (!(pll_retry_cont--)) {
+			dev_dbg(&pdev->dev, "USB PHY PLL not ready\n");
+			err = -EIO;
+			goto err2;
+		}
+	}
+
+	/* Toggle VCOCAL_START bit of U2PLL for PLL calibration */
+	udelay(200);
+	writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) | VCOCAL_START,
+		usb_phy_reg_base + USB_PHY_PLL_REG);
+	udelay(40);
+	writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~VCOCAL_START,
+		usb_phy_reg_base + USB_PHY_PLL_REG);
+
+	/* Toggle REG_RCAL_START bit of U2PTX for impedance calibration */
+	udelay(400);
+	writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) | REG_RCAL_START,
+		usb_phy_reg_base + USB_PHY_TX_REG);
+	udelay(40);
+	writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) & ~REG_RCAL_START,
+		usb_phy_reg_base + USB_PHY_TX_REG);
+
+	/* Make sure PHY PLL is ready again */
+	pll_retry_cont = 0;
+	while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) {
+		if (!(pll_retry_cont--)) {
+			dev_dbg(&pdev->dev, "USB PHY PLL not ready\n");
+			err = -EIO;
+			goto err2;
+		}
+	}
+
+	return 0;
+err2:
+	iounmap(usb_phy_reg_base);
+err1:
+	release_mem_region(res->start, resource_size(res));
+	return err;
+}
+
+static int __devinit ehci_pxa168_drv_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct usb_hcd *hcd;
+	struct ehci_hcd *ehci;
+	struct pxa168_usb_drv_data *drv_data;
+	void __iomem *regs;
+	int irq, err = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_debug("Initializing pxa168-SoC USB Host Controller\n");
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(&pdev->dev,
+			"Found HC with no IRQ. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		err = -ENODEV;
+		goto err1;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Found HC with no register addr. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		err = -ENODEV;
+		goto err1;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res),
+				ehci_pxa168_hc_driver.description)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		err = -EBUSY;
+		goto err1;
+	}
+
+	regs = ioremap(res->start, resource_size(res));
+	if (regs == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		err = -EFAULT;
+		goto err2;
+	}
+
+	hcd = usb_create_hcd(&ehci_pxa168_hc_driver,
+			&pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		err = -ENOMEM;
+		goto err3;
+	}
+
+	drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv;
+
+	/* Enable USB clock */
+	drv_data->pxa168_usb_clk = clk_get(&pdev->dev, "PXA168-USBCLK");
+	if (IS_ERR(drv_data->pxa168_usb_clk)) {
+		dev_err(&pdev->dev, "Couldn't get USB clock\n");
+		err = PTR_ERR(drv_data->pxa168_usb_clk);
+		goto err4;
+	}
+	clk_enable(drv_data->pxa168_usb_clk);
+
+	err = pxa168_usb_phy_init(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "USB PHY initialization failed\n");
+		goto err5;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+	hcd->regs = regs;
+
+	ehci = hcd_to_ehci(hcd);
+	ehci->caps = hcd->regs + 0x100;
+	ehci->regs = hcd->regs + 0x100 +
+		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+	hcd->has_tt = 1;
+	ehci->sbrn = 0x20;
+
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
+	if (err)
+		goto err5;
+
+	return 0;
+
+err5:
+	clk_disable(drv_data->pxa168_usb_clk);
+	clk_put(drv_data->pxa168_usb_clk);
+err4:
+	usb_put_hcd(hcd);
+err3:
+	iounmap(regs);
+err2:
+	release_mem_region(res->start, resource_size(res));
+err1:
+	dev_err(&pdev->dev, "init %s fail, %d\n",
+		dev_name(&pdev->dev), err);
+
+	return err;
+}
+
+static int __exit ehci_pxa168_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct pxa168_usb_drv_data *drv_data =
+		(struct pxa168_usb_drv_data *)hcd->hcd_priv;
+
+	usb_remove_hcd(hcd);
+
+	/* Power down PHY & PLL */
+	writel(readl(drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG) & (~0x3),
+		drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG);
+
+	clk_disable(drv_data->pxa168_usb_clk);
+	clk_put(drv_data->pxa168_usb_clk);
+
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+	iounmap(drv_data->usb_phy_reg_base);
+	release_mem_region(drv_data->usb_phy_res->start,
+			resource_size(drv_data->usb_phy_res));
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:pxa168-ehci");
+
+static struct platform_driver ehci_pxa168_driver = {
+	.probe		= ehci_pxa168_drv_probe,
+	.remove		= __exit_p(ehci_pxa168_drv_remove),
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver.name	= "pxa168-ehci",
+};
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 0917e3a32465..6ce0b3a9a0f9 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -153,7 +153,7 @@ static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd,
 	spin_lock_irqsave(&ehci->lock, flags);
 	qh->clearing_tt = 0;
 	if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list)
-			&& HC_IS_RUNNING(hcd->state))
+			&& ehci->rh_state == EHCI_RH_RUNNING)
 		qh_link_async(ehci, qh);
 	spin_unlock_irqrestore(&ehci->lock, flags);
 }
@@ -425,7 +425,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 		/* stop scanning when we reach qtds the hc is using */
 		} else if (likely (!stopped
-				&& HC_IS_RUNNING (ehci_to_hcd(ehci)->state))) {
+				&& ehci->rh_state == EHCI_RH_RUNNING)) {
 			break;
 
 		/* scan the whole queue for unlinks whenever it stops */
@@ -433,7 +433,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 			stopped = 1;
 
 			/* cancel everything if we halt, suspend, etc */
-			if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state))
+			if (ehci->rh_state != EHCI_RH_RUNNING)
 				last_status = -ESHUTDOWN;
 
 			/* this qtd is active; skip it unless a previous qtd
@@ -977,9 +977,8 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 			/* in case a clear of CMD_ASE didn't take yet */
 			(void)handshake(ehci, &ehci->regs->status,
 					STS_ASS, 0, 150);
-			cmd |= CMD_ASE | CMD_RUN;
+			cmd |= CMD_ASE;
 			ehci_writel(ehci, cmd, &ehci->regs->command);
-			ehci_to_hcd(ehci)->state = HC_STATE_RUNNING;
 			/* posted write need not be known to HC yet ... */
 		}
 	}
@@ -1168,14 +1167,13 @@ static void end_unlink_async (struct ehci_hcd *ehci)
 
 	qh_completions (ehci, qh);
 
-	if (!list_empty (&qh->qtd_list)
-			&& HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
+	if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) {
 		qh_link_async (ehci, qh);
-	else {
+	} else {
 		/* it's not free to turn the async schedule on/off; leave it
 		 * active but idle for a while once it empties.
 		 */
-		if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state)
+		if (ehci->rh_state == EHCI_RH_RUNNING
 				&& ehci->async->qh_next.qh == NULL)
 			timer_action (ehci, TIMER_ASYNC_OFF);
 	}
@@ -1211,7 +1209,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	/* stop async schedule right now? */
 	if (unlikely (qh == ehci->async)) {
 		/* can't get here without STS_ASS set */
-		if (ehci_to_hcd(ehci)->state != HC_STATE_HALT
+		if (ehci->rh_state != EHCI_RH_HALTED
 				&& !ehci->reclaim) {
 			/* ... and CMD_IAAD clear */
 			ehci_writel(ehci, cmd & ~CMD_ASE,
@@ -1237,7 +1235,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	wmb ();
 
 	/* If the controller isn't running, we don't have to wait for it */
-	if (unlikely(!HC_IS_RUNNING(ehci_to_hcd(ehci)->state))) {
+	if (unlikely(ehci->rh_state != EHCI_RH_RUNNING)) {
 		/* if (unlikely (qh->reclaim != 0))
 		 *	this will recurse, probably not much
 		 */
@@ -1260,7 +1258,7 @@ static void scan_async (struct ehci_hcd *ehci)
 	enum ehci_timer_action	action = TIMER_IO_WATCHDOG;
 
 	timer_action_done (ehci, TIMER_ASYNC_SHRINK);
-	stopped = !HC_IS_RUNNING(ehci_to_hcd(ehci)->state);
+	stopped = (ehci->rh_state != EHCI_RH_RUNNING);
 
 	ehci->qh_scan_next = ehci->async->qh_next.qh;
 	while (ehci->qh_scan_next) {
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 9e77f1c8bdbd..64bcf66d3040 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -270,7 +270,7 @@ static int s5p_ehci_resume(struct device *dev)
 	/* here we "know" root ports should always stay powered */
 	ehci_port_power(ehci, 1);
 
-	hcd->state = HC_STATE_SUSPENDED;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
 
 	return 0;
 }
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 2abf8543f083..488151bb45cb 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -479,7 +479,6 @@ static int enable_periodic (struct ehci_hcd *ehci)
 	cmd = ehci_readl(ehci, &ehci->regs->command) | CMD_PSE;
 	ehci_writel(ehci, cmd, &ehci->regs->command);
 	/* posted write ... PSS happens later */
-	ehci_to_hcd(ehci)->state = HC_STATE_RUNNING;
 
 	/* make sure ehci_work scans these */
 	ehci->next_uframe = ehci_readl(ehci, &ehci->regs->frame_index)
@@ -677,7 +676,7 @@ static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 	/* reschedule QH iff another request is queued */
 	if (!list_empty(&qh->qtd_list) &&
-			HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
+			ehci->rh_state == EHCI_RH_RUNNING) {
 		rc = qh_schedule(ehci, qh);
 
 		/* An error here likely indicates handshake failure
@@ -2275,7 +2274,7 @@ scan_periodic (struct ehci_hcd *ehci)
 	 * Touches as few pages as possible:  cache-friendly.
 	 */
 	now_uframe = ehci->next_uframe;
-	if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
+	if (ehci->rh_state == EHCI_RH_RUNNING) {
 		clock = ehci_readl(ehci, &ehci->regs->frame_index);
 		clock_frame = (clock >> 3) & (ehci->periodic_size - 1);
 	} else  {
@@ -2310,7 +2309,7 @@ restart:
 			union ehci_shadow	temp;
 			int			live;
 
-			live = HC_IS_RUNNING (ehci_to_hcd(ehci)->state);
+			live = (ehci->rh_state == EHCI_RH_RUNNING);
 			switch (hc32_to_cpu(ehci, type)) {
 			case Q_TYPE_QH:
 				/* handle any completions */
@@ -2435,7 +2434,7 @@ restart:
 		 * We can't advance our scan without collecting the ISO
 		 * transfers that are still pending in this frame.
 		 */
-		if (incomplete && HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
+		if (incomplete && ehci->rh_state == EHCI_RH_RUNNING) {
 			ehci->next_uframe = now_uframe;
 			break;
 		}
@@ -2451,7 +2450,7 @@ restart:
 		if (now_uframe == clock) {
 			unsigned	now;
 
-			if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state)
+			if (ehci->rh_state != EHCI_RH_RUNNING
 					|| ehci->periodic_sched == 0)
 				break;
 			ehci->next_uframe = now_uframe;
diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c
new file mode 100644
index 000000000000..fe74bd676018
--- /dev/null
+++ b/drivers/usb/host/ehci-xls.c
@@ -0,0 +1,161 @@
+/*
+ * EHCI HCD for Netlogic XLS processors.
+ *
+ * (C) Copyright 2011 Netlogic Microsystems Inc.
+ *
+ *  Based on various ehci-*.c drivers
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/platform_device.h>
+
+static int ehci_xls_setup(struct usb_hcd *hcd)
+{
+	int	retval;
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs +
+		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	/* data structure init */
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	ehci_reset(ehci);
+
+	return retval;
+}
+
+int ehci_xls_probe_internal(const struct hc_driver *driver,
+	struct platform_device *pdev)
+{
+	struct usb_hcd  *hcd;
+	struct resource *res;
+	int retval, irq;
+
+	/* Get our IRQ from an earlier registered Platform Resource */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n",
+				dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+
+	/* Get our Memory Handle */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Error: MMIO Handle %s setup!\n",
+				dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err1;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+				driver->description)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		retval = -EBUSY;
+		goto err2;
+	}
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+
+	if (hcd->regs == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		retval = -EFAULT;
+		goto err3;
+	}
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval != 0)
+		goto err4;
+	return retval;
+
+err4:
+	iounmap(hcd->regs);
+err3:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err2:
+	usb_put_hcd(hcd);
+err1:
+	dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev),
+			retval);
+	return retval;
+}
+
+static struct hc_driver ehci_xls_hc_driver = {
+	.description	= hcd_name,
+	.product_desc	= "XLS EHCI Host Controller",
+	.hcd_priv_size	= sizeof(struct ehci_hcd),
+	.irq		= ehci_irq,
+	.flags		= HCD_USB2 | HCD_MEMORY,
+	.reset		= ehci_xls_setup,
+	.start		= ehci_run,
+	.stop		= ehci_stop,
+	.shutdown	= ehci_shutdown,
+
+	.urb_enqueue	= ehci_urb_enqueue,
+	.urb_dequeue	= ehci_urb_dequeue,
+	.endpoint_disable = ehci_endpoint_disable,
+	.endpoint_reset	= ehci_endpoint_reset,
+
+	.get_frame_number = ehci_get_frame,
+
+	.hub_status_data = ehci_hub_status_data,
+	.hub_control	= ehci_hub_control,
+	.bus_suspend	= ehci_bus_suspend,
+	.bus_resume	= ehci_bus_resume,
+	.relinquish_port = ehci_relinquish_port,
+	.port_handed_over = ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_xls_probe(struct platform_device *pdev)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	return ehci_xls_probe_internal(&ehci_xls_hc_driver, pdev);
+}
+
+static int ehci_xls_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+MODULE_ALIAS("ehci-xls");
+
+static struct platform_driver ehci_xls_driver = {
+	.probe		= ehci_xls_probe,
+	.remove		= ehci_xls_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name = "ehci-xls",
+	},
+};
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index cc7d337ec355..c161d97de7dd 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -62,6 +62,12 @@ struct ehci_stats {
 
 #define	EHCI_MAX_ROOT_PORTS	15		/* see HCS_N_PORTS */
 
+enum ehci_rh_state {
+	EHCI_RH_HALTED,
+	EHCI_RH_SUSPENDED,
+	EHCI_RH_RUNNING
+};
+
 struct ehci_hcd {			/* one per controller */
 	/* glue to PCI and HCD framework */
 	struct ehci_caps __iomem *caps;
@@ -70,6 +76,7 @@ struct ehci_hcd {			/* one per controller */
 
 	__u32			hcs_params;	/* cached register copy */
 	spinlock_t		lock;
+	enum ehci_rh_state	rh_state;
 
 	/* async schedule support */
 	struct ehci_qh		*async;
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 572ea53b0226..484a74f7553a 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -621,12 +621,15 @@ static int __devinit of_fhci_probe(struct platform_device *ofdev)
 		goto err_pram;
 	}
 
-	pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE);
+	pram_addr = cpm_muram_alloc(FHCI_PRAM_SIZE, 64);
 	if (IS_ERR_VALUE(pram_addr)) {
 		dev_err(dev, "failed to allocate usb pram\n");
 		ret = -ENOMEM;
 		goto err_pram;
 	}
+
+	qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, QE_CR_SUBBLOCK_USB,
+		     QE_CR_PROTOCOL_UNSPECIFIED, pram_addr);
 	fhci->pram = cpm_muram_addr(pram_addr);
 
 	/* GPIOs and pins */
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 9c37dad3e816..21efca98a78c 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2358,7 +2358,7 @@ static int isp1362_hc_reset(struct usb_hcd *hcd)
 	unsigned long flags;
 	int clkrdy = 0;
 
-	pr_info("%s:\n", __func__);
+	pr_debug("%s:\n", __func__);
 
 	if (isp1362_hcd->board && isp1362_hcd->board->reset) {
 		isp1362_hcd->board->reset(hcd->self.controller, 1);
@@ -2395,7 +2395,7 @@ static void isp1362_hc_stop(struct usb_hcd *hcd)
 	unsigned long flags;
 	u32 tmp;
 
-	pr_info("%s:\n", __func__);
+	pr_debug("%s:\n", __func__);
 
 	del_timer_sync(&hcd->rh_timer);
 
@@ -2523,7 +2523,7 @@ static int isp1362_hc_start(struct usb_hcd *hcd)
 	u16 chipid;
 	unsigned long flags;
 
-	pr_info("%s:\n", __func__);
+	pr_debug("%s:\n", __func__);
 
 	spin_lock_irqsave(&isp1362_hcd->lock, flags);
 	chipid = isp1362_read_reg16(isp1362_hcd, HCCHIPID);
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 840beda66dd9..5b08bd743acc 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -21,6 +21,7 @@
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <linux/mm.h>
+#include <linux/timer.h>
 #include <asm/unaligned.h>
 #include <asm/cacheflush.h>
 
@@ -39,7 +40,6 @@ struct isp1760_hcd {
 	int			int_done_map;
 	struct memory_chunk memory_pool[BLOCKS];
 	struct list_head	controlqhs, bulkqhs, interruptqhs;
-	int active_ptds;
 
 	/* periodic schedule support */
 #define	DEFAULT_I_TDPS		1024
@@ -114,6 +114,7 @@ struct isp1760_qh {
 	u32 toggle;
 	u32 ping;
 	int slot;
+	int tt_buffer_dirty;	/* See USB2.0 spec section 11.17.5 */
 };
 
 struct urb_listitem {
@@ -489,10 +490,6 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
 			   16 : 32, (priv->devflags & ISP1760_FLAG_ANALOG_OC) ?
 			   "analog" : "digital");
 
-	/* This is weird: at the first plug-in of a device there seems to be
-	   one packet queued that never gets returned? */
-	priv->active_ptds = -1;
-
 	/* ATL reset */
 	reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode | ALL_ATX_RESET);
 	mdelay(10);
@@ -514,83 +511,6 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
 	return priv_init(hcd);
 }
 
-static void isp1760_init_maps(struct usb_hcd *hcd)
-{
-	/*set last maps, for iso its only 1, else 32 tds bitmap*/
-	reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000);
-	reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000);
-	reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001);
-
-	reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff);
-
-	reg_write32(hcd->regs, HC_BUFFER_STATUS_REG,
-						ATL_BUF_FILL | INT_BUF_FILL);
-}
-
-static void isp1760_enable_interrupts(struct usb_hcd *hcd)
-{
-	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0);
-	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0);
-	reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0);
-	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff);
-	/* step 23 passed */
-}
-
-static int isp1760_run(struct usb_hcd *hcd)
-{
-	int retval;
-	u32 temp;
-	u32 command;
-	u32 chipid;
-
-	hcd->uses_new_polling = 1;
-
-	hcd->state = HC_STATE_RUNNING;
-	isp1760_enable_interrupts(hcd);
-	temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
-	reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN);
-
-	command = reg_read32(hcd->regs, HC_USBCMD);
-	command &= ~(CMD_LRESET|CMD_RESET);
-	command |= CMD_RUN;
-	reg_write32(hcd->regs, HC_USBCMD, command);
-
-	retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000);
-	if (retval)
-		return retval;
-
-	/*
-	 * XXX
-	 * Spec says to write FLAG_CF as last config action, priv code grabs
-	 * the semaphore while doing so.
-	 */
-	down_write(&ehci_cf_port_reset_rwsem);
-	reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF);
-
-	retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000);
-	up_write(&ehci_cf_port_reset_rwsem);
-	if (retval)
-		return retval;
-
-	chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG);
-	dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n",
-					chipid & 0xffff, chipid >> 16);
-
-	/* PTD Register Init Part 2, Step 28 */
-	/* enable INTs */
-	isp1760_init_maps(hcd);
-
-	/* GRR this is run-once init(), being done every time the HC starts.
-	 * So long as they're part of class devices, we can't do it init()
-	 * since the class device isn't created that early.
-	 */
-	return 0;
-}
-
 static u32 base_to_chip(u32 base)
 {
 	return ((base - 0x400) >> 3);
@@ -813,28 +733,29 @@ static void start_bus_transfer(struct usb_hcd *hcd, u32 ptd_offset, int slot,
 	WARN_ON(slots[slot].qh);
 	WARN_ON(qtd->status != QTD_PAYLOAD_ALLOC);
 
-	slots[slot].qtd = qtd;
-	slots[slot].qh = qh;
-	qh->slot = slot;
-	qtd->status = QTD_XFER_STARTED; /* Set this before writing ptd, since
-		interrupt routine may preempt and expects this value. */
-	ptd_write(hcd->regs, ptd_offset, slot, ptd);
-	priv->active_ptds++;
-
 	/* Make sure done map has not triggered from some unlinked transfer */
 	if (ptd_offset == ATL_PTD_OFFSET) {
 		priv->atl_done_map |= reg_read32(hcd->regs,
 						HC_ATL_PTD_DONEMAP_REG);
-		priv->atl_done_map &= ~(1 << qh->slot);
+		priv->atl_done_map &= ~(1 << slot);
+	} else {
+		priv->int_done_map |= reg_read32(hcd->regs,
+						HC_INT_PTD_DONEMAP_REG);
+		priv->int_done_map &= ~(1 << slot);
+	}
 
+	qh->slot = slot;
+	qtd->status = QTD_XFER_STARTED;
+	slots[slot].timestamp = jiffies;
+	slots[slot].qtd = qtd;
+	slots[slot].qh = qh;
+	ptd_write(hcd->regs, ptd_offset, slot, ptd);
+
+	if (ptd_offset == ATL_PTD_OFFSET) {
 		skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
 		skip_map &= ~(1 << qh->slot);
 		reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map);
 	} else {
-		priv->int_done_map |= reg_read32(hcd->regs,
-						HC_INT_PTD_DONEMAP_REG);
-		priv->int_done_map &= ~(1 << qh->slot);
-
 		skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
 		skip_map &= ~(1 << qh->slot);
 		reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map);
@@ -858,10 +779,7 @@ static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh,
 		if (qtd->status < QTD_XFER_COMPLETE)
 			break;
 
-		if (list_is_last(&qtd->qtd_list, &qh->qtd_list))
-			last_qtd = 1;
-		else
-			last_qtd = qtd->urb != qtd_next->urb;
+		last_qtd = last_qtd_of_urb(qtd, qh);
 
 		if ((!last_qtd) && (qtd->status == QTD_RETIRE))
 			qtd_next->status = QTD_RETIRE;
@@ -902,7 +820,7 @@ static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh,
 			urb_listitem = kmem_cache_zalloc(urb_listitem_cachep,
 								GFP_ATOMIC);
 			if (unlikely(!urb_listitem))
-				break;
+				break; /* Try again on next call */
 			urb_listitem->urb = qtd->urb;
 			list_add_tail(&urb_listitem->urb_list, urb_list);
 		}
@@ -928,6 +846,10 @@ static void enqueue_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh)
 		return;
 	}
 
+	/* Make sure this endpoint's TT buffer is clean before queueing ptds */
+	if (qh->tt_buffer_dirty)
+		return;
+
 	if (usb_pipeint(list_entry(qh->qtd_list.next, struct isp1760_qtd,
 							qtd_list)->urb->pipe)) {
 		ptd_offset = INT_PTD_OFFSET;
@@ -1168,11 +1090,9 @@ static int check_atl_transfer(struct usb_hcd *hcd, struct ptd *ptd,
 	return PTD_STATE_QTD_DONE;
 }
 
-static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
+static void handle_done_ptds(struct usb_hcd *hcd)
 {
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	u32 imask;
-	irqreturn_t irqret = IRQ_NONE;
 	struct ptd ptd;
 	struct isp1760_qh *qh;
 	int slot;
@@ -1181,27 +1101,14 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
 	u32 ptd_offset;
 	struct isp1760_qtd *qtd;
 	int modified;
-	static int last_active_ptds;
-	int int_skip_map, atl_skip_map;
-
-	spin_lock(&priv->lock);
-
-	if (!(hcd->state & HC_STATE_RUNNING))
-		goto leave;
-
-	imask = reg_read32(hcd->regs, HC_INTERRUPT_REG);
-	if (unlikely(!imask))
-		goto leave;
-	reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); /* Clear */
+	int skip_map;
 
-	int_skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
-	atl_skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
-	priv->int_done_map |= reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG);
-	priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG);
-	priv->int_done_map &= ~int_skip_map;
-	priv->atl_done_map &= ~atl_skip_map;
+	skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
+	priv->int_done_map &= ~skip_map;
+	skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
+	priv->atl_done_map &= ~skip_map;
 
-	modified = priv->int_done_map | priv->atl_done_map;
+	modified = priv->int_done_map || priv->atl_done_map;
 
 	while (priv->int_done_map || priv->atl_done_map) {
 		if (priv->int_done_map) {
@@ -1240,7 +1147,6 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
 		slots[slot].qtd = NULL;
 		qh = slots[slot].qh;
 		slots[slot].qh = NULL;
-		priv->active_ptds--;
 		qh->slot = -1;
 
 		WARN_ON(qtd->status != QTD_XFER_STARTED);
@@ -1281,6 +1187,15 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
 
 		case PTD_STATE_URB_RETIRE:
 			qtd->status = QTD_RETIRE;
+			if ((qtd->urb->dev->speed != USB_SPEED_HIGH) &&
+					(qtd->urb->status != -EPIPE) &&
+					(qtd->urb->status != -EREMOTEIO)) {
+				qh->tt_buffer_dirty = 1;
+				if (usb_hub_clear_tt_buffer(qtd->urb))
+					/* Clear failed; let's hope things work
+					   anyway */
+					qh->tt_buffer_dirty = 0;
+			}
 			qtd = NULL;
 			qh->toggle = 0;
 			qh->ping = 0;
@@ -1311,22 +1226,28 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
 
 	if (modified)
 		schedule_ptds(hcd);
+}
+
+static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 imask;
+	irqreturn_t irqret = IRQ_NONE;
 
-	/* ISP1760 Errata 2 explains that interrupts may be missed (or not
-	   happen?) if two USB devices are running simultaneously. Perhaps
-	   this happens when a PTD is finished during interrupt handling;
-	   enable SOF interrupts if PTDs are still scheduled when exiting this
-	   interrupt handler, just to be safe. */
+	spin_lock(&priv->lock);
 
-	if (priv->active_ptds != last_active_ptds) {
-		if (priv->active_ptds > 0)
-			reg_write32(hcd->regs, HC_INTERRUPT_ENABLE,
-						INTERRUPT_ENABLE_SOT_MASK);
-		else
-			reg_write32(hcd->regs, HC_INTERRUPT_ENABLE,
-						INTERRUPT_ENABLE_MASK);
-		last_active_ptds = priv->active_ptds;
-	}
+	if (!(hcd->state & HC_STATE_RUNNING))
+		goto leave;
+
+	imask = reg_read32(hcd->regs, HC_INTERRUPT_REG);
+	if (unlikely(!imask))
+		goto leave;
+	reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); /* Clear */
+
+	priv->int_done_map |= reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG);
+	priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG);
+
+	handle_done_ptds(hcd);
 
 	irqret = IRQ_HANDLED;
 leave:
@@ -1335,6 +1256,138 @@ leave:
 	return irqret;
 }
 
+/*
+ * Workaround for problem described in chip errata 2:
+ *
+ * Sometimes interrupts are not generated when ATL (not INT?) completion occurs.
+ * One solution suggested in the errata is to use SOF interrupts _instead_of_
+ * ATL done interrupts (the "instead of" might be important since it seems
+ * enabling ATL interrupts also causes the chip to sometimes - rarely - "forget"
+ * to set the PTD's done bit in addition to not generating an interrupt!).
+ *
+ * So if we use SOF + ATL interrupts, we sometimes get stale PTDs since their
+ * done bit is not being set. This is bad - it blocks the endpoint until reboot.
+ *
+ * If we use SOF interrupts only, we get latency between ptd completion and the
+ * actual handling. This is very noticeable in testusb runs which takes several
+ * minutes longer without ATL interrupts.
+ *
+ * A better solution is to run the code below every SLOT_CHECK_PERIOD ms. If it
+ * finds active ATL slots which are older than SLOT_TIMEOUT ms, it checks the
+ * slot's ACTIVE and VALID bits. If these are not set, the ptd is considered
+ * completed and its done map bit is set.
+ *
+ * The values of SLOT_TIMEOUT and SLOT_CHECK_PERIOD have been arbitrarily chosen
+ * not to cause too much lag when this HW bug occurs, while still hopefully
+ * ensuring that the check does not falsely trigger.
+ */
+#define SLOT_TIMEOUT 300
+#define SLOT_CHECK_PERIOD 200
+static struct timer_list errata2_timer;
+
+void errata2_function(unsigned long data)
+{
+	struct usb_hcd *hcd = (struct usb_hcd *) data;
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	int slot;
+	struct ptd ptd;
+	unsigned long spinflags;
+
+	spin_lock_irqsave(&priv->lock, spinflags);
+
+	for (slot = 0; slot < 32; slot++)
+		if (priv->atl_slots[slot].qh && time_after(jiffies,
+					priv->atl_slots[slot].timestamp +
+					SLOT_TIMEOUT * HZ / 1000)) {
+			ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd);
+			if (!FROM_DW0_VALID(ptd.dw0) &&
+					!FROM_DW3_ACTIVE(ptd.dw3))
+				priv->atl_done_map |= 1 << slot;
+		}
+
+	if (priv->atl_done_map)
+		handle_done_ptds(hcd);
+
+	spin_unlock_irqrestore(&priv->lock, spinflags);
+
+	errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000;
+	add_timer(&errata2_timer);
+}
+
+static int isp1760_run(struct usb_hcd *hcd)
+{
+	int retval;
+	u32 temp;
+	u32 command;
+	u32 chipid;
+
+	hcd->uses_new_polling = 1;
+
+	hcd->state = HC_STATE_RUNNING;
+
+	/* Set PTD interrupt AND & OR maps */
+	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0);
+	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0);
+	reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0);
+	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff);
+	/* step 23 passed */
+
+	temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
+	reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN);
+
+	command = reg_read32(hcd->regs, HC_USBCMD);
+	command &= ~(CMD_LRESET|CMD_RESET);
+	command |= CMD_RUN;
+	reg_write32(hcd->regs, HC_USBCMD, command);
+
+	retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000);
+	if (retval)
+		return retval;
+
+	/*
+	 * XXX
+	 * Spec says to write FLAG_CF as last config action, priv code grabs
+	 * the semaphore while doing so.
+	 */
+	down_write(&ehci_cf_port_reset_rwsem);
+	reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF);
+
+	retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000);
+	up_write(&ehci_cf_port_reset_rwsem);
+	if (retval)
+		return retval;
+
+	init_timer(&errata2_timer);
+	errata2_timer.function = errata2_function;
+	errata2_timer.data = (unsigned long) hcd;
+	errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000;
+	add_timer(&errata2_timer);
+
+	chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG);
+	dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n",
+					chipid & 0xffff, chipid >> 16);
+
+	/* PTD Register Init Part 2, Step 28 */
+
+	/* Setup registers controlling PTD checking */
+	reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000);
+	reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000);
+	reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001);
+	reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_BUFFER_STATUS_REG,
+						ATL_BUF_FILL | INT_BUF_FILL);
+
+	/* GRR this is run-once init(), being done every time the HC starts.
+	 * So long as they're part of class devices, we can't do it init()
+	 * since the class device isn't created that early.
+	 */
+	return 0;
+}
+
 static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len)
 {
 	qtd->data_buffer = databuffer;
@@ -1503,7 +1556,6 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 	packetize_urb(hcd, urb, &new_qtds, mem_flags);
 	if (list_empty(&new_qtds))
 		return -ENOMEM;
-	urb->hcpriv = NULL; /* Used to signal unlink to interrupt handler */
 
 	retval = 0;
 	spin_lock_irqsave(&priv->lock, spinflags);
@@ -1531,6 +1583,7 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 		qh = qh_alloc(GFP_ATOMIC);
 		if (!qh) {
 			retval = -ENOMEM;
+			usb_hcd_unlink_urb_from_ep(hcd, urb);
 			goto out;
 		}
 		list_add_tail(&qh->qh_list, ep_queue);
@@ -1570,7 +1623,41 @@ static void kill_transfer(struct usb_hcd *hcd, struct urb *urb,
 	}
 
 	qh->slot = -1;
-	priv->active_ptds--;
+}
+
+/*
+ * Retire the qtds beginning at 'qtd' and belonging all to the same urb, killing
+ * any active transfer belonging to the urb in the process.
+ */
+static void dequeue_urb_from_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh,
+						struct isp1760_qtd *qtd)
+{
+	struct urb *urb;
+	int urb_was_running;
+
+	urb = qtd->urb;
+	urb_was_running = 0;
+	list_for_each_entry_from(qtd, &qh->qtd_list, qtd_list) {
+		if (qtd->urb != urb)
+			break;
+
+		if (qtd->status >= QTD_XFER_STARTED)
+			urb_was_running = 1;
+		if (last_qtd_of_urb(qtd, qh) &&
+					(qtd->status >= QTD_XFER_COMPLETE))
+			urb_was_running = 0;
+
+		if (qtd->status == QTD_XFER_STARTED)
+			kill_transfer(hcd, urb, qh);
+		qtd->status = QTD_RETIRE;
+	}
+
+	if ((urb->dev->speed != USB_SPEED_HIGH) && urb_was_running) {
+		qh->tt_buffer_dirty = 1;
+		if (usb_hub_clear_tt_buffer(urb))
+			/* Clear failed; let's hope things work anyway */
+			qh->tt_buffer_dirty = 0;
+	}
 }
 
 static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
@@ -1595,9 +1682,8 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 
 	list_for_each_entry(qtd, &qh->qtd_list, qtd_list)
 		if (qtd->urb == urb) {
-			if (qtd->status == QTD_XFER_STARTED)
-				kill_transfer(hcd, urb, qh);
-			qtd->status = QTD_RETIRE;
+			dequeue_urb_from_qtd(hcd, qh, qtd);
+			break;
 		}
 
 	urb->status = status;
@@ -1622,12 +1708,11 @@ static void isp1760_endpoint_disable(struct usb_hcd *hcd,
 	if (!qh)
 		goto out;
 
-	list_for_each_entry(qtd, &qh->qtd_list, qtd_list) {
-		if (qtd->status == QTD_XFER_STARTED)
-			kill_transfer(hcd, qtd->urb, qh);
-		qtd->status = QTD_RETIRE;
-		qtd->urb->status = -ECONNRESET;
-	}
+	list_for_each_entry(qtd, &qh->qtd_list, qtd_list)
+		if (qtd->status != QTD_RETIRE) {
+			dequeue_urb_from_qtd(hcd, qh, qtd);
+			qtd->urb->status = -ECONNRESET;
+		}
 
 	ep->hcpriv = NULL;
 	/* Cannot free qh here since it will be parsed by schedule_ptds() */
@@ -2021,6 +2106,8 @@ static void isp1760_stop(struct usb_hcd *hcd)
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	u32 temp;
 
+	del_timer(&errata2_timer);
+
 	isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER,	1,
 			NULL, 0);
 	mdelay(20);
@@ -2048,6 +2135,23 @@ static void isp1760_shutdown(struct usb_hcd *hcd)
 	reg_write32(hcd->regs, HC_USBCMD, command);
 }
 
+static void isp1760_clear_tt_buffer_complete(struct usb_hcd *hcd,
+						struct usb_host_endpoint *ep)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	struct isp1760_qh *qh = ep->hcpriv;
+	unsigned long spinflags;
+
+	if (!qh)
+		return;
+
+	spin_lock_irqsave(&priv->lock, spinflags);
+	qh->tt_buffer_dirty = 0;
+	schedule_ptds(hcd);
+	spin_unlock_irqrestore(&priv->lock, spinflags);
+}
+
+
 static const struct hc_driver isp1760_hc_driver = {
 	.description		= "isp1760-hcd",
 	.product_desc		= "NXP ISP1760 USB Host Controller",
@@ -2064,6 +2168,7 @@ static const struct hc_driver isp1760_hc_driver = {
 	.get_frame_number	= isp1760_get_frame,
 	.hub_status_data	= isp1760_hub_status_data,
 	.hub_control		= isp1760_hub_control,
+	.clear_tt_buffer_complete	= isp1760_clear_tt_buffer_complete,
 };
 
 int __init init_kmem_once(void)
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
index 014a7dfadf91..fda0f2d54e3d 100644
--- a/drivers/usb/host/isp1760-hcd.h
+++ b/drivers/usb/host/isp1760-hcd.h
@@ -73,7 +73,6 @@ void deinit_kmem_cache(void);
 #define HC_EOT_INT		(1 << 3)
 #define HC_SOT_INT		(1 << 1)
 #define INTERRUPT_ENABLE_MASK	(HC_INTL_INT | HC_ATL_INT)
-#define INTERRUPT_ENABLE_SOT_MASK	(HC_SOT_INT)
 
 #define HC_ISO_IRQ_MASK_OR_REG	0x318
 #define HC_INT_IRQ_MASK_OR_REG	0x31C
@@ -107,6 +106,7 @@ struct ptd {
 struct slotinfo {
 	struct isp1760_qh *qh;
 	struct isp1760_qtd *qtd;
+	unsigned long timestamp;
 };
 
 
@@ -188,6 +188,7 @@ struct memory_chunk {
 #define DW3_BABBLE_BIT			(1 << 29)
 #define DW3_HALT_BIT			(1 << 30)
 #define DW3_ACTIVE_BIT			(1 << 31)
+#define FROM_DW3_ACTIVE(x)		(((x) >> 31) & 0x01)
 
 #define INT_UNDERRUN			(1 << 2)
 #define INT_BABBLE			(1 << 1)
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index f9cf3f04b742..34efd479e068 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1114,6 +1114,11 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ohci_hcd_ath79_driver
 #endif
 
+#ifdef CONFIG_NLM_XLR
+#include "ohci-xls.c"
+#define PLATFORM_DRIVER		ohci_xls_driver
+#endif
+
 #if	!defined(PCI_DRIVER) &&		\
 	!defined(PLATFORM_DRIVER) &&	\
 	!defined(OMAP1_PLATFORM_DRIVER) &&	\
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 6048f2f64f73..853ad8dacb7e 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -149,7 +149,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
 
 	res = platform_get_resource_byname(pdev,
 				IORESOURCE_MEM, "ohci");
-	if (!ret) {
+	if (!res) {
 		dev_err(dev, "UHH OHCI get resource failed\n");
 		return -ENOMEM;
 	}
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index dd24fc115e48..15dc51ded61a 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -428,7 +428,7 @@ static struct ed *ed_get (
 		ed->type = usb_pipetype(pipe);
 
 		info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << 7;
-		info |= le16_to_cpu(ep->desc.wMaxPacketSize) << 16;
+		info |= usb_endpoint_maxp(&ep->desc) << 16;
 		if (udev->speed == USB_SPEED_LOW)
 			info |= ED_LOWSPEED;
 		/* only control transfers store pids in tds */
@@ -444,7 +444,7 @@ static struct ed *ed_get (
 				ed->load = usb_calc_bus_time (
 					udev->speed, !is_out,
 					ed->type == PIPE_ISOCHRONOUS,
-					le16_to_cpu(ep->desc.wMaxPacketSize))
+					usb_endpoint_maxp(&ep->desc))
 						/ 1000;
 			}
 		}
diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c
new file mode 100644
index 000000000000..a3a9c6f45b91
--- /dev/null
+++ b/drivers/usb/host/ohci-xls.c
@@ -0,0 +1,151 @@
+/*
+ * OHCI HCD for Netlogic XLS processors.
+ *
+ * (C) Copyright 2011 Netlogic Microsystems Inc.
+ *
+ *  Based on ohci-au1xxx.c, and other Linux OHCI drivers.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/signal.h>
+
+static int ohci_xls_probe_internal(const struct hc_driver *driver,
+			struct platform_device *dev)
+{
+	struct resource *res;
+	struct usb_hcd *hcd;
+	int retval, irq;
+
+	/* Get our IRQ from an earlier registered Platform Resource */
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		dev_err(&dev->dev, "Found HC with no IRQ\n");
+		return -ENODEV;
+	}
+
+	/* Get our Memory Handle */
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&dev->dev, "MMIO Handle incorrect!\n");
+		return -ENODEV;
+	}
+
+	hcd = usb_create_hcd(driver, &dev->dev, "XLS");
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err1;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+			driver->description)) {
+		dev_dbg(&dev->dev, "Controller already in use\n");
+		retval = -EBUSY;
+		goto err2;
+	}
+
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_dbg(&dev->dev, "error mapping memory\n");
+		retval = -EFAULT;
+		goto err3;
+	}
+
+	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	if (retval != 0)
+		goto err4;
+	return retval;
+
+err4:
+	iounmap(hcd->regs);
+err3:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err2:
+	usb_put_hcd(hcd);
+err1:
+	dev_err(&dev->dev, "init fail, %d\n", retval);
+	return retval;
+}
+
+static int ohci_xls_reset(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+	ohci_hcd_init(ohci);
+	return ohci_init(ohci);
+}
+
+static int __devinit ohci_xls_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci;
+	int ret;
+
+	ohci = hcd_to_ohci(hcd);
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		err("can't start %s", hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+	return 0;
+}
+
+static struct hc_driver ohci_xls_hc_driver = {
+	.description	= hcd_name,
+	.product_desc	= "XLS OHCI Host Controller",
+	.hcd_priv_size	= sizeof(struct ohci_hcd),
+	.irq		= ohci_irq,
+	.flags		= HCD_MEMORY | HCD_USB11,
+	.reset		= ohci_xls_reset,
+	.start		= ohci_xls_start,
+	.stop		= ohci_stop,
+	.shutdown	= ohci_shutdown,
+	.urb_enqueue	= ohci_urb_enqueue,
+	.urb_dequeue	= ohci_urb_dequeue,
+	.endpoint_disable = ohci_endpoint_disable,
+	.get_frame_number = ohci_get_frame,
+	.hub_status_data = ohci_hub_status_data,
+	.hub_control	= ohci_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend	= ohci_bus_suspend,
+	.bus_resume	= ohci_bus_resume,
+#endif
+	.start_port_reset = ohci_start_port_reset,
+};
+
+static int ohci_xls_probe(struct platform_device *dev)
+{
+	int ret;
+
+	pr_debug("In ohci_xls_probe");
+	if (usb_disabled())
+		return -ENODEV;
+	ret = ohci_xls_probe_internal(&ohci_xls_hc_driver, dev);
+	return ret;
+}
+
+static int ohci_xls_remove(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+static struct platform_driver ohci_xls_driver = {
+	.probe		= ohci_xls_probe,
+	.remove		= ohci_xls_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "ohci-xls-0",
+		.owner	= THIS_MODULE,
+	},
+};
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 40a0d8b03ad7..a6f256436e77 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -959,7 +959,7 @@ static void init_pipe_info(struct r8a66597 *r8a66597, struct urb *urb,
 	info.pipenum = get_empty_pipenum(r8a66597, ep);
 	info.address = get_urb_to_r8a66597_addr(r8a66597, urb);
 	info.epnum = usb_endpoint_num(ep);
-	info.maxpacket = le16_to_cpu(ep->wMaxPacketSize);
+	info.maxpacket = usb_endpoint_maxp(ep);
 	info.type = get_r8a66597_type(usb_endpoint_type(ep));
 	info.bufnum = get_bufnum(info.pipenum);
 	info.buf_bsize = get_buf_bsize(info.pipenum);
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 84ed28b34f93..f6ca80ee4cec 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -280,7 +280,7 @@ static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci,
 			qh->load = usb_calc_bus_time(udev->speed,
 					usb_endpoint_dir_in(&hep->desc),
 					qh->type == USB_ENDPOINT_XFER_ISOC,
-					le16_to_cpu(hep->desc.wMaxPacketSize))
+					usb_endpoint_maxp(&hep->desc))
 				/ 1000 + 1;
 
 	} else {		/* Skeleton QH */
@@ -792,7 +792,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
 {
 	struct uhci_td *td;
 	unsigned long destination, status;
-	int maxsze = le16_to_cpu(qh->hep->desc.wMaxPacketSize);
+	int maxsze = usb_endpoint_maxp(&qh->hep->desc);
 	int len = urb->transfer_buffer_length;
 	dma_addr_t data = urb->transfer_dma;
 	__hc32 *plink;
@@ -918,7 +918,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb,
 {
 	struct uhci_td *td;
 	unsigned long destination, status;
-	int maxsze = le16_to_cpu(qh->hep->desc.wMaxPacketSize);
+	int maxsze = usb_endpoint_maxp(&qh->hep->desc);
 	int len = urb->transfer_buffer_length;
 	int this_sg_len;
 	dma_addr_t data;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index d446886b22b0..d873a0330c9e 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1141,8 +1141,8 @@ static u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
 	if (udev->speed == USB_SPEED_SUPER)
 		return le16_to_cpu(ep->ss_ep_comp.wBytesPerInterval);
 
-	max_packet = GET_MAX_PACKET(le16_to_cpu(ep->desc.wMaxPacketSize));
-	max_burst = (le16_to_cpu(ep->desc.wMaxPacketSize) & 0x1800) >> 11;
+	max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
+	max_burst = (usb_endpoint_maxp(&ep->desc) & 0x1800) >> 11;
 	/* A 0 in max burst means 1 transfer per ESIT */
 	return max_packet * (max_burst + 1);
 }
@@ -1211,7 +1211,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	/* Set the max packet size and max burst */
 	switch (udev->speed) {
 	case USB_SPEED_SUPER:
-		max_packet = le16_to_cpu(ep->desc.wMaxPacketSize);
+		max_packet = usb_endpoint_maxp(&ep->desc);
 		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
 		/* dig out max burst from ep companion desc */
 		max_packet = ep->ss_ep_comp.bMaxBurst;
@@ -1223,14 +1223,14 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 		 */
 		if (usb_endpoint_xfer_isoc(&ep->desc) ||
 				usb_endpoint_xfer_int(&ep->desc)) {
-			max_burst = (le16_to_cpu(ep->desc.wMaxPacketSize)
+			max_burst = (usb_endpoint_maxp(&ep->desc)
 				     & 0x1800) >> 11;
 			ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_burst));
 		}
 		/* Fall through */
 	case USB_SPEED_FULL:
 	case USB_SPEED_LOW:
-		max_packet = GET_MAX_PACKET(le16_to_cpu(ep->desc.wMaxPacketSize));
+		max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
 		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
 		break;
 	default:
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 54139a2f06ce..58a6e26648ea 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2692,7 +2692,7 @@ static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len,
 	 * running_total.
 	 */
 	packets_transferred = (running_total + trb_buff_len) /
-		le16_to_cpu(urb->ep->desc.wMaxPacketSize);
+		usb_endpoint_maxp(&urb->ep->desc);
 
 	return xhci_td_remainder(total_packet_count - packets_transferred);
 }
@@ -2722,7 +2722,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	num_trbs = count_sg_trbs_needed(xhci, urb);
 	num_sgs = urb->num_sgs;
 	total_packet_count = roundup(urb->transfer_buffer_length,
-			le16_to_cpu(urb->ep->desc.wMaxPacketSize));
+			usb_endpoint_maxp(&urb->ep->desc));
 
 	trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
 			ep_index, urb->stream_id,
@@ -2929,7 +2929,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
 	running_total = 0;
 	total_packet_count = roundup(urb->transfer_buffer_length,
-			le16_to_cpu(urb->ep->desc.wMaxPacketSize));
+			usb_endpoint_maxp(&urb->ep->desc));
 	/* How much data is in the first TRB? */
 	addr = (u64) urb->transfer_dma;
 	trb_buff_len = TRB_MAX_BUFF_SIZE -
@@ -3250,7 +3250,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		td_len = urb->iso_frame_desc[i].length;
 		td_remain_len = td_len;
 		total_packet_count = roundup(td_len,
-				le16_to_cpu(urb->ep->desc.wMaxPacketSize));
+				usb_endpoint_maxp(&urb->ep->desc));
 		/* A zero-length transfer still involves at least one packet. */
 		if (total_packet_count == 0)
 			total_packet_count++;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3a0f695138f4..f647d918a886 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -987,7 +987,7 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
 	out_ctx = xhci->devs[slot_id]->out_ctx;
 	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
 	hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2));
-	max_packet_size = le16_to_cpu(urb->dev->ep0.desc.wMaxPacketSize);
+	max_packet_size = usb_endpoint_maxp(&urb->dev->ep0.desc);
 	if (hw_max_packet_size != max_packet_size) {
 		xhci_dbg(xhci, "Max Packet Size for ep 0 changed.\n");
 		xhci_dbg(xhci, "Max packet size in usb_device = %d\n",
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index a6afd15f6a46..fe858711651c 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -213,7 +213,7 @@ static void adu_interrupt_in_callback(struct urb *urb)
 
 	if (urb->actual_length > 0 && dev->interrupt_in_buffer[0] != 0x00) {
 		if (dev->read_buffer_length <
-		    (4 * le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize)) -
+		    (4 * usb_endpoint_maxp(dev->interrupt_in_endpoint)) -
 		     (urb->actual_length)) {
 			memcpy (dev->read_buffer_primary +
 				dev->read_buffer_length,
@@ -315,7 +315,7 @@ static int adu_open(struct inode *inode, struct file *file)
 			 usb_rcvintpipe(dev->udev,
 					dev->interrupt_in_endpoint->bEndpointAddress),
 			 dev->interrupt_in_buffer,
-			 le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
+			 usb_endpoint_maxp(dev->interrupt_in_endpoint),
 			 adu_interrupt_in_callback, dev,
 			 dev->interrupt_in_endpoint->bInterval);
 	dev->read_urb_finished = 0;
@@ -483,7 +483,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
 							 usb_rcvintpipe(dev->udev,
 							 		dev->interrupt_in_endpoint->bEndpointAddress),
 							 dev->interrupt_in_buffer,
-							 le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
+							 usb_endpoint_maxp(dev->interrupt_in_endpoint),
 							 adu_interrupt_in_callback,
 							 dev,
 							 dev->interrupt_in_endpoint->bInterval);
@@ -536,7 +536,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
 				 usb_rcvintpipe(dev->udev,
 				 		dev->interrupt_in_endpoint->bEndpointAddress),
 				dev->interrupt_in_buffer,
-				le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
+				usb_endpoint_maxp(dev->interrupt_in_endpoint),
 				adu_interrupt_in_callback,
 				dev,
 				dev->interrupt_in_endpoint->bInterval);
@@ -622,7 +622,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
 			dbg(4," %s : sending, count = %Zd", __func__, count);
 
 			/* write the data into interrupt_out_buffer from userspace */
-			buffer_size = le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize);
+			buffer_size = usb_endpoint_maxp(dev->interrupt_out_endpoint);
 			bytes_to_write = count > buffer_size ? buffer_size : count;
 			dbg(4," %s : buffer_size = %Zd, count = %Zd, bytes_to_write = %Zd",
 			    __func__, buffer_size, count, bytes_to_write);
@@ -752,8 +752,8 @@ static int adu_probe(struct usb_interface *interface,
 		goto error;
 	}
 
-	in_end_size = le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize);
-	out_end_size = le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize);
+	in_end_size = usb_endpoint_maxp(dev->interrupt_in_endpoint);
+	out_end_size = usb_endpoint_maxp(dev->interrupt_out_endpoint);
 
 	dev->read_buffer_primary = kmalloc((4 * in_end_size), GFP_KERNEL);
 	if (!dev->read_buffer_primary) {
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 2f41089cd854..2dbe600fbc11 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -2777,7 +2777,7 @@ static int ftdi_elan_probe(struct usb_interface *interface,
                 endpoint = &iface_desc->endpoint[i].desc;
                 if (!ftdi->bulk_in_endpointAddr &&
 		    usb_endpoint_is_bulk_in(endpoint)) {
-                        buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+                        buffer_size = usb_endpoint_maxp(endpoint);
                         ftdi->bulk_in_size = buffer_size;
                         ftdi->bulk_in_endpointAddr = endpoint->bEndpointAddress;
                         ftdi->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index c6184b4d1695..515b67fffab1 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -359,7 +359,7 @@ static int idmouse_probe(struct usb_interface *interface,
 	endpoint = &iface_desc->endpoint[0].desc;
 	if (!dev->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) {
 		/* we found a bulk in endpoint */
-		dev->orig_bi_size = le16_to_cpu(endpoint->wMaxPacketSize);
+		dev->orig_bi_size = usb_endpoint_maxp(endpoint);
 		dev->bulk_in_size = 0x200; /* works _much_ faster */
 		dev->bulk_in_endpointAddr = endpoint->bEndpointAddress;
 		dev->bulk_in_buffer =
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index a2190b983f52..81457904d6ba 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -803,7 +803,7 @@ static int iowarrior_probe(struct usb_interface *interface,
 			dev->int_out_endpoint = endpoint;
 	}
 	/* we have to check the report_size often, so remember it in the endianess suitable for our machine */
-	dev->report_size = le16_to_cpu(dev->int_in_endpoint->wMaxPacketSize);
+	dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
 	if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) &&
 	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56))
 		/* IOWarrior56 has wMaxPacketSize different from report size */
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index cb4096201e29..48c166f0d764 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -721,7 +721,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *
 	if (dev->interrupt_out_endpoint == NULL)
 		dev_warn(&intf->dev, "Interrupt out endpoint not found (using control endpoint instead)\n");
 
-	dev->interrupt_in_endpoint_size = le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize);
+	dev->interrupt_in_endpoint_size = usb_endpoint_maxp(dev->interrupt_in_endpoint);
 	dev->ring_buffer = kmalloc(ring_buffer_size*(sizeof(size_t)+dev->interrupt_in_endpoint_size), GFP_KERNEL);
 	if (!dev->ring_buffer) {
 		dev_err(&intf->dev, "Couldn't allocate ring_buffer\n");
@@ -737,7 +737,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *
 		dev_err(&intf->dev, "Couldn't allocate interrupt_in_urb\n");
 		goto error;
 	}
-	dev->interrupt_out_endpoint_size = dev->interrupt_out_endpoint ? le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize) :
+	dev->interrupt_out_endpoint_size = dev->interrupt_out_endpoint ? usb_endpoint_maxp(dev->interrupt_out_endpoint) :
 									 udev->descriptor.bMaxPacketSize0;
 	dev->interrupt_out_buffer = kmalloc(write_buffer_size*dev->interrupt_out_endpoint_size, GFP_KERNEL);
 	if (!dev->interrupt_out_buffer) {
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 6482c6e2e6bd..a989356f693e 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -409,7 +409,7 @@ static int tower_open (struct inode *inode, struct file *file)
 			  dev->udev,
 			  usb_rcvintpipe(dev->udev, dev->interrupt_in_endpoint->bEndpointAddress),
 			  dev->interrupt_in_buffer,
-			  le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
+			  usb_endpoint_maxp(dev->interrupt_in_endpoint),
 			  tower_interrupt_in_callback,
 			  dev,
 			  dev->interrupt_in_interval);
@@ -928,7 +928,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
 		err("Couldn't allocate read_buffer");
 		goto error;
 	}
-	dev->interrupt_in_buffer = kmalloc (le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), GFP_KERNEL);
+	dev->interrupt_in_buffer = kmalloc (usb_endpoint_maxp(dev->interrupt_in_endpoint), GFP_KERNEL);
 	if (!dev->interrupt_in_buffer) {
 		err("Couldn't allocate interrupt_in_buffer");
 		goto error;
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 51648154bb44..1871cdf10da3 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -18,7 +18,7 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/mutex.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 
 #define DRIVER_VERSION "USBLCD Driver Version 1.05"
@@ -34,22 +34,29 @@ static const struct usb_device_id id_table[] = {
 	{ .idVendor = 0x10D2, .match_flags = USB_DEVICE_ID_MATCH_VENDOR, },
 	{ },
 };
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 static DEFINE_MUTEX(open_disc_mutex);
 
 
 struct usb_lcd {
-	struct usb_device *	udev;			/* init: probe_lcd */
-	struct usb_interface *  interface;		/* the interface for this device */
-	unsigned char *         bulk_in_buffer;		/* the buffer to receive data */
-	size_t			bulk_in_size;		/* the size of the receive buffer */
-	__u8			bulk_in_endpointAddr;	/* the address of the bulk in endpoint */
-	__u8			bulk_out_endpointAddr;	/* the address of the bulk out endpoint */
+	struct usb_device	*udev;			/* init: probe_lcd */
+	struct usb_interface	*interface;		/* the interface for
+							   this device */
+	unsigned char		*bulk_in_buffer;	/* the buffer to receive
+							   data */
+	size_t			bulk_in_size;		/* the size of the
+							   receive buffer */
+	__u8			bulk_in_endpointAddr;	/* the address of the
+							   bulk in endpoint */
+	__u8			bulk_out_endpointAddr;	/* the address of the
+							   bulk out endpoint */
 	struct kref		kref;
-	struct semaphore	limit_sem;		/* to stop writes at full throttle from
-							 * using up all RAM */
-	struct usb_anchor	submitted;		/* URBs to wait for before suspend */
+	struct semaphore	limit_sem;		/* to stop writes at
+							   full throttle from
+							   using up all RAM */
+	struct usb_anchor	submitted;		/* URBs to wait for
+							   before suspend */
 };
 #define to_lcd_dev(d) container_of(d, struct usb_lcd, kref)
 
@@ -63,8 +70,8 @@ static void lcd_delete(struct kref *kref)
 	struct usb_lcd *dev = to_lcd_dev(kref);
 
 	usb_put_dev(dev->udev);
-	kfree (dev->bulk_in_buffer);
-	kfree (dev);
+	kfree(dev->bulk_in_buffer);
+	kfree(dev);
 }
 
 
@@ -80,7 +87,7 @@ static int lcd_open(struct inode *inode, struct file *file)
 	interface = usb_find_interface(&lcd_driver, subminor);
 	if (!interface) {
 		mutex_unlock(&lcd_mutex);
-		err ("USBLCD: %s - error, can't find device for minor %d",
+		err("USBLCD: %s - error, can't find device for minor %d",
 		     __func__, subminor);
 		return -ENODEV;
 	}
@@ -126,7 +133,8 @@ static int lcd_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t lcd_read(struct file *file, char __user * buffer, size_t count, loff_t *ppos)
+static ssize_t lcd_read(struct file *file, char __user * buffer,
+			size_t count, loff_t *ppos)
 {
 	struct usb_lcd *dev;
 	int retval = 0;
@@ -135,8 +143,9 @@ static ssize_t lcd_read(struct file *file, char __user * buffer, size_t count, l
 	dev = file->private_data;
 
 	/* do a blocking bulk read to get data from the device */
-	retval = usb_bulk_msg(dev->udev, 
-			      usb_rcvbulkpipe(dev->udev, dev->bulk_in_endpointAddr),
+	retval = usb_bulk_msg(dev->udev,
+			      usb_rcvbulkpipe(dev->udev,
+					      dev->bulk_in_endpointAddr),
 			      dev->bulk_in_buffer,
 			      min(dev->bulk_in_size, count),
 			      &bytes_read, 10000);
@@ -161,23 +170,23 @@ static long lcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	dev = file->private_data;
 	if (dev == NULL)
 		return -ENODEV;
-	
+
 	switch (cmd) {
 	case IOCTL_GET_HARD_VERSION:
 		mutex_lock(&lcd_mutex);
 		bcdDevice = le16_to_cpu((dev->udev)->descriptor.bcdDevice);
-		sprintf(buf,"%1d%1d.%1d%1d",
+		sprintf(buf, "%1d%1d.%1d%1d",
 			(bcdDevice & 0xF000)>>12,
 			(bcdDevice & 0xF00)>>8,
 			(bcdDevice & 0xF0)>>4,
 			(bcdDevice & 0xF));
 		mutex_unlock(&lcd_mutex);
-		if (copy_to_user((void __user *)arg,buf,strlen(buf))!=0)
+		if (copy_to_user((void __user *)arg, buf, strlen(buf)) != 0)
 			return -EFAULT;
 		break;
 	case IOCTL_GET_DRV_VERSION:
-		sprintf(buf,DRIVER_VERSION);
-		if (copy_to_user((void __user *)arg,buf,strlen(buf))!=0)
+		sprintf(buf, DRIVER_VERSION);
+		if (copy_to_user((void __user *)arg, buf, strlen(buf)) != 0)
 			return -EFAULT;
 		break;
 	default:
@@ -199,7 +208,7 @@ static void lcd_write_bulk_callback(struct urb *urb)
 	if (status &&
 	    !(status == -ENOENT ||
 	      status == -ECONNRESET ||
-              status == -ESHUTDOWN)) {
+	      status == -ESHUTDOWN)) {
 		dbg("USBLCD: %s - nonzero write bulk status received: %d",
 		    __func__, status);
 	}
@@ -210,15 +219,16 @@ static void lcd_write_bulk_callback(struct urb *urb)
 	up(&dev->limit_sem);
 }
 
-static ssize_t lcd_write(struct file *file, const char __user * user_buffer, size_t count, loff_t *ppos)
+static ssize_t lcd_write(struct file *file, const char __user * user_buffer,
+			 size_t count, loff_t *ppos)
 {
 	struct usb_lcd *dev;
-        int retval = 0, r;
+	int retval = 0, r;
 	struct urb *urb = NULL;
 	char *buf = NULL;
-	
+
 	dev = file->private_data;
-	
+
 	/* verify that we actually have some data to write */
 	if (count == 0)
 		goto exit;
@@ -233,34 +243,38 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, siz
 		retval = -ENOMEM;
 		goto err_no_buf;
 	}
-	
-	buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL, &urb->transfer_dma);
+
+	buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL,
+				 &urb->transfer_dma);
 	if (!buf) {
 		retval = -ENOMEM;
 		goto error;
 	}
-	
+
 	if (copy_from_user(buf, user_buffer, count)) {
 		retval = -EFAULT;
 		goto error;
 	}
-	
+
 	/* initialize the urb properly */
 	usb_fill_bulk_urb(urb, dev->udev,
-			  usb_sndbulkpipe(dev->udev, dev->bulk_out_endpointAddr),
+			  usb_sndbulkpipe(dev->udev,
+			  dev->bulk_out_endpointAddr),
 			  buf, count, lcd_write_bulk_callback, dev);
 	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
 	usb_anchor_urb(urb, &dev->submitted);
-	
+
 	/* send the data out the bulk port */
 	retval = usb_submit_urb(urb, GFP_KERNEL);
 	if (retval) {
-		err("USBLCD: %s - failed submitting write urb, error %d", __func__, retval);
+		err("USBLCD: %s - failed submitting write urb, error %d",
+		    __func__, retval);
 		goto error_unanchor;
 	}
-	
-	/* release our reference to this urb, the USB core will eventually free it entirely */
+
+	/* release our reference to this urb,
+	   the USB core will eventually free it entirely */
 	usb_free_urb(urb);
 
 exit:
@@ -276,13 +290,13 @@ err_no_buf:
 }
 
 static const struct file_operations lcd_fops = {
-        .owner =        THIS_MODULE,
-        .read =         lcd_read,
-        .write =        lcd_write,
-        .open =         lcd_open,
+	.owner =        THIS_MODULE,
+	.read =         lcd_read,
+	.write =        lcd_write,
+	.open =         lcd_open,
 	.unlocked_ioctl = lcd_ioctl,
-        .release =      lcd_release,
-        .llseek =	 noop_llseek,
+	.release =      lcd_release,
+	.llseek =	 noop_llseek,
 };
 
 /*
@@ -290,12 +304,13 @@ static const struct file_operations lcd_fops = {
  * and to have the device registered with the driver core
  */
 static struct usb_class_driver lcd_class = {
-        .name =         "lcd%d",
-        .fops =         &lcd_fops,
-        .minor_base =   USBLCD_MINOR,
+	.name =         "lcd%d",
+	.fops =         &lcd_fops,
+	.minor_base =   USBLCD_MINOR,
 };
 
-static int lcd_probe(struct usb_interface *interface, const struct usb_device_id *id)
+static int lcd_probe(struct usb_interface *interface,
+		     const struct usb_device_id *id)
 {
 	struct usb_lcd *dev = NULL;
 	struct usb_host_interface *iface_desc;
@@ -322,7 +337,7 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id
 		retval = -ENODEV;
 		goto error;
 	}
-	
+
 	/* set up the endpoint information */
 	/* use only the first bulk-in and bulk-out endpoints */
 	iface_desc = interface->cur_altsetting;
@@ -332,7 +347,7 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id
 		if (!dev->bulk_in_endpointAddr &&
 		    usb_endpoint_is_bulk_in(endpoint)) {
 			/* we found a bulk in endpoint */
-			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+			buffer_size = usb_endpoint_maxp(endpoint);
 			dev->bulk_in_size = buffer_size;
 			dev->bulk_in_endpointAddr = endpoint->bEndpointAddress;
 			dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
@@ -369,7 +384,7 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id
 
 	dev_info(&interface->dev, "USBLCD Version %1d%1d.%1d%1d found "
 		 "at address %d\n", (i & 0xF000)>>12, (i & 0xF00)>>8,
-		 (i & 0xF0)>>4,(i & 0xF), dev->udev->devnum);
+		 (i & 0xF0)>>4, (i & 0xF), dev->udev->devnum);
 
 	/* let the user know what node this device is now attached to */
 	dev_info(&interface->dev, "USB LCD device now attached to USBLCD-%d\n",
@@ -401,7 +416,7 @@ static int lcd_suspend(struct usb_interface *intf, pm_message_t message)
 	return 0;
 }
 
-static int lcd_resume (struct usb_interface *intf)
+static int lcd_resume(struct usb_interface *intf)
 {
 	return 0;
 }
@@ -409,16 +424,16 @@ static int lcd_resume (struct usb_interface *intf)
 static void lcd_disconnect(struct usb_interface *interface)
 {
 	struct usb_lcd *dev;
-        int minor = interface->minor;
+	int minor = interface->minor;
 
 	mutex_lock(&open_disc_mutex);
-        dev = usb_get_intfdata(interface);
-        usb_set_intfdata(interface, NULL);
+	dev = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
 	mutex_unlock(&open_disc_mutex);
 
-        /* give back our minor */
-        usb_deregister_dev(interface, &lcd_class);
- 
+	/* give back our minor */
+	usb_deregister_dev(interface, &lcd_class);
+
 	/* decrement our usage count */
 	kref_put(&dev->kref, lcd_delete);
 
@@ -438,7 +453,7 @@ static struct usb_driver lcd_driver = {
 static int __init usb_lcd_init(void)
 {
 	int result;
-	
+
 	result = usb_register(&lcd_driver);
 	if (result)
 		err("usb_register failed. Error number %d", result);
diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
index 1616ad1793a4..43f84e50d514 100644
--- a/drivers/usb/misc/usbled.c
+++ b/drivers/usb/misc/usbled.c
@@ -33,10 +33,10 @@ static const struct usb_device_id id_table[] = {
 			.driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
 	{ },
 };
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 struct usb_led {
-	struct usb_device *	udev;
+	struct usb_device	*udev;
 	unsigned char		blue;
 	unsigned char		red;
 	unsigned char		green;
@@ -113,14 +113,16 @@ static void change_color(struct usb_led *led)
 }
 
 #define show_set(value)	\
-static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf)		\
+static ssize_t show_##value(struct device *dev, struct device_attribute *attr,\
+			    char *buf)					\
 {									\
 	struct usb_interface *intf = to_usb_interface(dev);		\
 	struct usb_led *led = usb_get_intfdata(intf);			\
 									\
 	return sprintf(buf, "%d\n", led->value);			\
 }									\
-static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)	\
+static ssize_t set_##value(struct device *dev, struct device_attribute *attr,\
+			   const char *buf, size_t count)		\
 {									\
 	struct usb_interface *intf = to_usb_interface(dev);		\
 	struct usb_led *led = usb_get_intfdata(intf);			\
@@ -135,7 +137,8 @@ show_set(blue);
 show_set(red);
 show_set(green);
 
-static int led_probe(struct usb_interface *interface, const struct usb_device_id *id)
+static int led_probe(struct usb_interface *interface,
+		     const struct usb_device_id *id)
 {
 	struct usb_device *udev = interface_to_usbdev(interface);
 	struct usb_led *dev = NULL;
@@ -150,7 +153,7 @@ static int led_probe(struct usb_interface *interface, const struct usb_device_id
 	dev->udev = usb_get_dev(udev);
 	dev->type = id->driver_info;
 
-	usb_set_intfdata (interface, dev);
+	usb_set_intfdata(interface, dev);
 
 	retval = device_create_file(&interface->dev, &dev_attr_blue);
 	if (retval)
@@ -194,7 +197,7 @@ error:
 	device_remove_file(&interface->dev, &dev_attr_blue);
 	device_remove_file(&interface->dev, &dev_attr_red);
 	device_remove_file(&interface->dev, &dev_attr_green);
-	usb_set_intfdata (interface, NULL);
+	usb_set_intfdata(interface, NULL);
 	usb_put_dev(dev->udev);
 	kfree(dev);
 error_mem:
@@ -205,14 +208,14 @@ static void led_disconnect(struct usb_interface *interface)
 {
 	struct usb_led *dev;
 
-	dev = usb_get_intfdata (interface);
+	dev = usb_get_intfdata(interface);
 
 	device_remove_file(&interface->dev, &dev_attr_blue);
 	device_remove_file(&interface->dev, &dev_attr_red);
 	device_remove_file(&interface->dev, &dev_attr_green);
 
 	/* first remove the files, then set the pointer to NULL */
-	usb_set_intfdata (interface, NULL);
+	usb_set_intfdata(interface, NULL);
 
 	usb_put_dev(dev->udev);
 
@@ -243,8 +246,8 @@ static void __exit usb_led_exit(void)
 	usb_deregister(&led_driver);
 }
 
-module_init (usb_led_init);
-module_exit (usb_led_exit);
+module_init(usb_led_init);
+module_exit(usb_led_exit);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index bb10846affc3..930962f49276 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -359,8 +359,10 @@ static int simple_io(
 	urb->context = &completion;
 	while (retval == 0 && iterations-- > 0) {
 		init_completion(&completion);
-		if (usb_pipeout(urb->pipe))
+		if (usb_pipeout(urb->pipe)) {
 			simple_fill_buf(urb);
+			urb->transfer_flags |= URB_ZERO_PACKET;
+		}
 		retval = usb_submit_urb(urb, GFP_KERNEL);
 		if (retval != 0)
 			break;
@@ -1583,8 +1585,8 @@ static struct urb *iso_alloc_urb(
 
 	if (bytes < 0 || !desc)
 		return NULL;
-	maxp = 0x7ff & le16_to_cpu(desc->wMaxPacketSize);
-	maxp *= 1 + (0x3 & (le16_to_cpu(desc->wMaxPacketSize) >> 11));
+	maxp = 0x7ff & usb_endpoint_maxp(desc);
+	maxp *= 1 + (0x3 & (usb_endpoint_maxp(desc) >> 11));
 	packets = DIV_ROUND_UP(bytes, maxp);
 
 	urb = usb_alloc_urb(packets, GFP_KERNEL);
@@ -1654,7 +1656,7 @@ test_iso_queue(struct usbtest_dev *dev, struct usbtest_param *param,
 		"... iso period %d %sframes, wMaxPacket %04x\n",
 		1 << (desc->bInterval - 1),
 		(udev->speed == USB_SPEED_HIGH) ? "micro" : "",
-		le16_to_cpu(desc->wMaxPacketSize));
+		usb_endpoint_maxp(desc));
 
 	for (i = 0; i < param->sglen; i++) {
 		urbs[i] = iso_alloc_urb(udev, pipe, desc,
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index e81820370d6f..3f79e7f9a9ee 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1020,7 +1020,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
 		goto fail;
 
 	/* REVISIT this rules out high bandwidth periodic transfers */
-	tmp = le16_to_cpu(desc->wMaxPacketSize);
+	tmp = usb_endpoint_maxp(desc);
 	if (tmp & ~0x07ff) {
 		int ok;
 
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 8b2473fa0f47..60ddba8066ea 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1932,7 +1932,7 @@ static int musb_urb_enqueue(
 	INIT_LIST_HEAD(&qh->ring);
 	qh->is_ready = 1;
 
-	qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
+	qh->maxpacket = usb_endpoint_maxp(epd);
 	qh->type = usb_endpoint_type(epd);
 
 	/* Bits 11 & 12 of wMaxPacketSize encode high bandwidth multiplier.
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index b4d2c0972b3d..ed2b26cfe814 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -137,22 +137,6 @@ static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
 	return ret;
 }
 
-/*-------------------------------------------------------------------------*/
-static int twl6030_set_phy_clk(struct otg_transceiver *x, int on)
-{
-	struct twl6030_usb *twl;
-	struct device *dev;
-	struct twl4030_usb_data *pdata;
-
-	twl = xceiv_to_twl(x);
-	dev  = twl->dev;
-	pdata = dev->platform_data;
-
-	pdata->phy_set_clock(twl->dev, on);
-
-	return 0;
-}
-
 static int twl6030_phy_init(struct otg_transceiver *x)
 {
 	struct twl6030_usb *twl;
diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c
index 1b14cae45704..3bbbbb403f01 100644
--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -392,7 +392,7 @@ static u16 usbhsp_setup_pipemaxp(struct usbhs_pipe *pipe,
 	/* host should set DEVSEL */
 
 	/* reutn MXPS */
-	return PIPE_MAXP_MASK & le16_to_cpu(desc->wMaxPacketSize);
+	return PIPE_MAXP_MASK & usb_endpoint_maxp(desc);
 }
 
 static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe,
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index b71e309116a3..677f577c0243 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -252,6 +252,7 @@ config USB_SERIAL_GARMIN
 
 config USB_SERIAL_IPW
         tristate "USB IPWireless (3G UMTS TDD) Driver"
+	select USB_SERIAL_WWAN
 	help
 	  Say Y here if you want to use a IPWireless USB modem such as
 	  the ones supplied by Axity3G/Sentech South Africa.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5fc13e717911..5cfd87eb1a8b 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1486,7 +1486,7 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port)
 	}
 
 	/* set max packet size based on descriptor */
-	priv->max_packet_size = le16_to_cpu(ep_desc->wMaxPacketSize);
+	priv->max_packet_size = usb_endpoint_maxp(ep_desc);
 
 	dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
 }
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index abf095be5753..2ee807523f53 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -3042,7 +3042,7 @@ static int edge_startup(struct usb_serial *serial)
 
 			endpoint = &serial->interface->altsetting[0].
 							endpoint[i].desc;
-			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+			buffer_size = usb_endpoint_maxp(endpoint);
 			if (!interrupt_in_found &&
 			    (usb_endpoint_is_int_in(endpoint))) {
 				/* we found a interrupt in endpoint */
@@ -3107,7 +3107,7 @@ static int edge_startup(struct usb_serial *serial)
 					usb_rcvbulkpipe(dev,
 						endpoint->bEndpointAddress),
 					edge_serial->bulk_in_buffer,
-					le16_to_cpu(endpoint->wMaxPacketSize),
+					usb_endpoint_maxp(endpoint),
 					edge_bulk_in_callback,
 					edge_serial);
 				bulk_in_found = true;
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index ca77e88836bd..5170799d6e94 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -47,6 +47,7 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/uaccess.h>
+#include "usb-wwan.h"
 
 /*
  * Version Information
@@ -185,7 +186,7 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	/*--2: Start reading from the device */
 	dbg("%s: setting up bulk read callback", __func__);
-	usb_serial_generic_open(tty, port);
+	usb_wwan_open(tty, port);
 
 	/*--3: Tell the modem to open the floodgates on the rx bulk channel */
 	dbg("%s:asking modem for RxRead (RXBULK_ON)", __func__);
@@ -219,6 +220,29 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
 	return 0;
 }
 
+/* fake probe - only to allocate data structures */
+static int ipw_probe(struct usb_serial *serial, const struct usb_device_id *id)
+{
+	struct usb_wwan_intf_private *data;
+
+	data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spin_lock_init(&data->susp_lock);
+	usb_set_serial_data(serial, data);
+	return 0;
+}
+
+static void ipw_release(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *data = usb_get_serial_data(serial);
+
+	usb_wwan_release(serial);
+	usb_set_serial_data(serial, NULL);
+	kfree(data);
+}
+
 static void ipw_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct usb_device *dev = port->serial->dev;
@@ -285,7 +309,7 @@ static void ipw_close(struct usb_serial_port *port)
 		dev_err(&port->dev,
 			"Disabling bulk RxRead failed (error = %d)\n", result);
 
-	usb_serial_generic_close(port);
+	usb_wwan_close(port);
 }
 
 static struct usb_serial_driver ipw_device = {
@@ -297,9 +321,14 @@ static struct usb_serial_driver ipw_device = {
 	.usb_driver =		&usb_ipw_driver,
 	.id_table =		usb_ipw_ids,
 	.num_ports =		1,
+	.disconnect =		usb_wwan_disconnect,
 	.open =			ipw_open,
 	.close =		ipw_close,
+	.probe =		ipw_probe,
+	.attach =		usb_wwan_startup,
+	.release =		ipw_release,
 	.dtr_rts =		ipw_dtr_rts,
+	.write =		usb_wwan_write,
 };
 
 
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 96423f3c8ef3..c248a9147439 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -523,7 +523,7 @@ static int opticon_startup(struct usb_serial *serial)
 			goto error;
 		}
 
-		priv->buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2;
+		priv->buffer_size = usb_endpoint_maxp(endpoint) * 2;
 		priv->bulk_in_buffer = kmalloc(priv->buffer_size, GFP_KERNEL);
 		if (!priv->bulk_in_buffer) {
 			dev_err(&priv->udev->dev, "out of memory\n");
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 1d33260de014..0ae840f789a4 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -360,9 +360,6 @@ static void pl2303_set_termios(struct tty_struct *tty,
 				tmp >>= 2;
 				buf[1] <<= 1;
 			}
-			if (tmp > 256) {
-				tmp %= 256;
-			}
 			buf[0] = tmp;
 		}
 	}
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index d9457bd4fe10..7096f799b071 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -226,7 +226,7 @@ static int symbol_startup(struct usb_serial *serial)
 			goto error;
 		}
 
-		priv->buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2;
+		priv->buffer_size = usb_endpoint_maxp(endpoint) * 2;
 		priv->int_buffer = kmalloc(priv->buffer_size, GFP_KERNEL);
 		if (!priv->int_buffer) {
 			dev_err(&priv->udev->dev, "out of memory\n");
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 1c031309ab25..cc274fdf2627 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -912,7 +912,7 @@ int usb_serial_probe(struct usb_interface *interface,
 			goto probe_error;
 		}
 		buffer_size = max_t(int, serial->type->bulk_in_size,
-				le16_to_cpu(endpoint->wMaxPacketSize));
+				usb_endpoint_maxp(endpoint));
 		port->bulk_in_size = buffer_size;
 		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
 		port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
@@ -942,7 +942,7 @@ int usb_serial_probe(struct usb_interface *interface,
 			goto probe_error;
 		buffer_size = serial->type->bulk_out_size;
 		if (!buffer_size)
-			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+			buffer_size = usb_endpoint_maxp(endpoint);
 		port->bulk_out_size = buffer_size;
 		port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
 		port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
@@ -990,7 +990,7 @@ int usb_serial_probe(struct usb_interface *interface,
 						"No free urbs available\n");
 				goto probe_error;
 			}
-			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+			buffer_size = usb_endpoint_maxp(endpoint);
 			port->interrupt_in_endpointAddress =
 						endpoint->bEndpointAddress;
 			port->interrupt_in_buffer = kmalloc(buffer_size,
@@ -1021,7 +1021,7 @@ int usb_serial_probe(struct usb_interface *interface,
 						"No free urbs available\n");
 				goto probe_error;
 			}
-			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+			buffer_size = usb_endpoint_maxp(endpoint);
 			port->interrupt_out_size = buffer_size;
 			port->interrupt_out_endpointAddress =
 						endpoint->bEndpointAddress;
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 34adc4b42ceb..232167ad4781 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -320,6 +320,11 @@ static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
 {
 	int retval;
 	u8 cmnd[12] = { 0 };
+	u8 *buf;
+
+	buf = kmalloc(len, GFP_NOIO);
+	if (buf == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
 
 	US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len);
 
@@ -331,10 +336,14 @@ static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
 	cmnd[5] = (u8) len;
 
 	retval = rts51x_bulk_transport(us, 0, cmnd, 12,
-				       data, len, DMA_FROM_DEVICE, NULL);
-	if (retval != USB_STOR_TRANSPORT_GOOD)
+				       buf, len, DMA_FROM_DEVICE, NULL);
+	if (retval != USB_STOR_TRANSPORT_GOOD) {
+		kfree(buf);
 		return -EIO;
+	}
 
+	memcpy(data, buf, len);
+	kfree(buf);
 	return 0;
 }
 
@@ -342,6 +351,12 @@ static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
 {
 	int retval;
 	u8 cmnd[12] = { 0 };
+	u8 *buf;
+
+	buf = kmalloc(len, GFP_NOIO);
+	if (buf == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+	memcpy(buf, data, len);
 
 	US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len);
 
@@ -353,7 +368,8 @@ static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
 	cmnd[5] = (u8) len;
 
 	retval = rts51x_bulk_transport(us, 0, cmnd, 12,
-				       data, len, DMA_TO_DEVICE, NULL);
+				       buf, len, DMA_TO_DEVICE, NULL);
+	kfree(buf);
 	if (retval != USB_STOR_TRANSPORT_GOOD)
 		return -EIO;
 
@@ -365,6 +381,11 @@ static int rts51x_read_status(struct us_data *us,
 {
 	int retval;
 	u8 cmnd[12] = { 0 };
+	u8 *buf;
+
+	buf = kmalloc(len, GFP_NOIO);
+	if (buf == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
 
 	US_DEBUGP("%s, lun = %d\n", __func__, lun);
 
@@ -372,10 +393,14 @@ static int rts51x_read_status(struct us_data *us,
 	cmnd[1] = 0x09;
 
 	retval = rts51x_bulk_transport(us, lun, cmnd, 12,
-				       status, len, DMA_FROM_DEVICE, actlen);
-	if (retval != USB_STOR_TRANSPORT_GOOD)
+				       buf, len, DMA_FROM_DEVICE, actlen);
+	if (retval != USB_STOR_TRANSPORT_GOOD) {
+		kfree(buf);
 		return -EIO;
+	}
 
+	memcpy(status, buf, len);
+	kfree(buf);
 	return 0;
 }
 
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 0ca095820f3e..c325e69415a1 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -831,12 +831,22 @@ static int usb_stor_scan_thread(void * __us)
 
 	dev_dbg(dev, "device found\n");
 
-	set_freezable();
-	/* Wait for the timeout to expire or for a disconnect */
+	set_freezable_with_signal();
+	/*
+	 * Wait for the timeout to expire or for a disconnect
+	 *
+	 * We can't freeze in this thread or we risk causing khubd to
+	 * fail to freeze, but we can't be non-freezable either. Nor can
+	 * khubd freeze while waiting for scanning to complete as it may
+	 * hold the device lock, causing a hang when suspending devices.
+	 * So we request a fake signal when freezing and use
+	 * interruptible sleep to kick us out of our wait early when
+	 * freezing happens.
+	 */
 	if (delay_use > 0) {
 		dev_dbg(dev, "waiting for device to settle "
 				"before scanning\n");
-		wait_event_freezable_timeout(us->delay_wait,
+		wait_event_interruptible_timeout(us->delay_wait,
 				test_bit(US_FLIDX_DONT_SCAN, &us->dflags),
 				delay_use * HZ);
 	}
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index e24ce3123071..32d6fc953904 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -555,7 +555,7 @@ static int skel_probe(struct usb_interface *interface,
 		if (!dev->bulk_in_endpointAddr &&
 		    usb_endpoint_is_bulk_in(endpoint)) {
 			/* we found a bulk in endpoint */
-			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+			buffer_size = usb_endpoint_maxp(endpoint);
 			dev->bulk_in_size = buffer_size;
 			dev->bulk_in_endpointAddr = endpoint->bEndpointAddress;
 			dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c
index 59a748a0e5da..0d1863c9edde 100644
--- a/drivers/usb/wusbcore/wa-hc.c
+++ b/drivers/usb/wusbcore/wa-hc.c
@@ -43,7 +43,7 @@ int wa_create(struct wahc *wa, struct usb_interface *iface)
 	/* Fill up Data Transfer EP pointers */
 	wa->dti_epd = &iface->cur_altsetting->endpoint[1].desc;
 	wa->dto_epd = &iface->cur_altsetting->endpoint[2].desc;
-	wa->xfer_result_size = le16_to_cpu(wa->dti_epd->wMaxPacketSize);
+	wa->xfer_result_size = usb_endpoint_maxp(wa->dti_epd);
 	wa->xfer_result = kmalloc(wa->xfer_result_size, GFP_KERNEL);
 	if (wa->xfer_result == NULL)
 		goto error_xfer_result_alloc;