V4L/DVB (13144): gspca_ov519: Add support for OV2610 and OV3610 sensors

This patch adds support for the OV2610 and OV3610 sensors to the gspca
ov519 subdriver. This is a preparation patch for adding ovfx2 bridge
support.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 882 insertions, 10 deletions

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index bb9976dc1e24..bfc88360132d 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -58,6 +58,7 @@ struct sd {
 #define BRIDGE_OV518		2
 #define BRIDGE_OV518PLUS	3
 #define BRIDGE_OV519		4
+#define BRIDGE_OVFX2		5
 #define BRIDGE_MASK		7
 
 	char invert_led;
@@ -81,15 +82,17 @@ struct sd {
 
 	char sensor;		/* Type of image sensor chip (SEN_*) */
 #define SEN_UNKNOWN 0
-#define SEN_OV6620 1
-#define SEN_OV6630 2
-#define SEN_OV66308AF 3
-#define SEN_OV7610 4
-#define SEN_OV7620 5
-#define SEN_OV7640 6
-#define SEN_OV7670 7
-#define SEN_OV76BE 8
-#define SEN_OV8610 9
+#define SEN_OV2610 1
+#define SEN_OV3610 2
+#define SEN_OV6620 3
+#define SEN_OV6630 4
+#define SEN_OV66308AF 5
+#define SEN_OV7610 6
+#define SEN_OV7620 7
+#define SEN_OV7640 8
+#define SEN_OV7670 9
+#define SEN_OV76BE 10
+#define SEN_OV8610 11
 };
 
 /* V4L2 controls supported by the driver */
@@ -345,6 +348,70 @@ static const struct v4l2_pix_format ov511_sif_mode[] = {
 		.priv = 0},
 };
 
+static const struct v4l2_pix_format ovfx2_vga_mode[] = {
+	{320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1},
+	{640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0},
+};
+static const struct v4l2_pix_format ovfx2_cif_mode[] = {
+	{160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 3},
+	{176, 144, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 176,
+		.sizeimage = 176 * 144,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1},
+	{320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 2},
+	{352, 288, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 352,
+		.sizeimage = 352 * 288,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0},
+};
+static const struct v4l2_pix_format ovfx2_ov2610_mode[] = {
+	{1600, 1200, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 1600,
+		.sizeimage = 1600 * 1200,
+		.colorspace = V4L2_COLORSPACE_SRGB},
+};
+static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
+	{2080, 1544, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 2080,
+		.sizeimage = 2080 * 1544,
+		.colorspace = V4L2_COLORSPACE_SRGB},
+	{1600, 1200, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 1600,
+		.sizeimage = 1600 * 1200,
+		.colorspace = V4L2_COLORSPACE_SRGB},
+	{1024, 768, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 1024,
+		.sizeimage = 1024 * 768,
+		.colorspace = V4L2_COLORSPACE_SRGB},
+	{800, 600, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 800,
+		.sizeimage = 800 * 600,
+		.colorspace = V4L2_COLORSPACE_SRGB},
+	{640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB},
+};
+
+
 /* Registers common to OV511 / OV518 */
 #define R51x_FIFO_PSIZE			0x30	/* 2 bytes wide w/ OV518(+) */
 #define R51x_SYS_RESET          	0x50
@@ -509,6 +576,696 @@ struct ov_i2c_regvals {
 	__u8 val;
 };
 
+/* Settings for OV2610 camera chip */
+static const struct ov_i2c_regvals norm_2610[] =
+{
+	{ 0x10, 0x80 },	/* reset */
+};
+
+static const struct ov_i2c_regvals norm_3620b[] =
+{
+	/*
+	 * From the datasheet: "Note that after writing to register COMH
+	 * (0x12) to change the sensor mode, registers related to the
+	 * sensor’s cropping window will be reset back to their default
+	 * values."
+	 *
+	 * "wait 4096 external clock ... to make sure the sensor is
+	 * stable and ready to access registers" i.e. 160us at 24MHz
+	 */
+
+	{ 0x12, 0x80 }, /* COMH reset */
+	{ 0x12, 0x00 }, /* QXGA, master */
+
+	/*
+	 * 11 CLKRC "Clock Rate Control"
+	 * [7] internal frequency doublers: on
+	 * [6] video port mode: master
+	 * [5:0] clock divider: 1
+	 */
+	{ 0x11, 0x80 },
+
+	/*
+	 * 13 COMI "Common Control I"
+	 *                  = 192 (0xC0) 11000000
+	 *    COMI[7] "AEC speed selection"
+	 *                  =   1 (0x01) 1....... "Faster AEC correction"
+	 *    COMI[6] "AEC speed step selection"
+	 *                  =   1 (0x01) .1...... "Big steps, fast"
+	 *    COMI[5] "Banding filter on off"
+	 *                  =   0 (0x00) ..0..... "Off"
+	 *    COMI[4] "Banding filter option"
+	 *                  =   0 (0x00) ...0.... "Main clock is 48 MHz and
+	 *                                         the PLL is ON"
+	 *    COMI[3] "Reserved"
+	 *                  =   0 (0x00) ....0...
+	 *    COMI[2] "AGC auto manual control selection"
+	 *                  =   0 (0x00) .....0.. "Manual"
+	 *    COMI[1] "AWB auto manual control selection"
+	 *                  =   0 (0x00) ......0. "Manual"
+	 *    COMI[0] "Exposure control"
+	 *                  =   0 (0x00) .......0 "Manual"
+	 */
+	{ 0x13, 0xC0 },
+
+	/*
+	 * 09 COMC "Common Control C"
+	 *                  =   8 (0x08) 00001000
+	 *    COMC[7:5] "Reserved"
+	 *                  =   0 (0x00) 000.....
+	 *    COMC[4] "Sleep Mode Enable"
+	 *                  =   0 (0x00) ...0.... "Normal mode"
+	 *    COMC[3:2] "Sensor sampling reset timing selection"
+	 *                  =   2 (0x02) ....10.. "Longer reset time"
+	 *    COMC[1:0] "Output drive current select"
+	 *                  =   0 (0x00) ......00 "Weakest"
+	 */
+	{ 0x09, 0x08 },
+
+	/*
+	 * 0C COMD "Common Control D"
+	 *                  =   8 (0x08) 00001000
+	 *    COMD[7] "Reserved"
+	 *                  =   0 (0x00) 0.......
+	 *    COMD[6] "Swap MSB and LSB at the output port"
+	 *                  =   0 (0x00) .0...... "False"
+	 *    COMD[5:3] "Reserved"
+	 *                  =   1 (0x01) ..001...
+	 *    COMD[2] "Output Average On Off"
+	 *                  =   0 (0x00) .....0.. "Output Normal"
+	 *    COMD[1] "Sensor precharge voltage selection"
+	 *                  =   0 (0x00) ......0. "Selects internal
+	 *                                         reference precharge
+	 *                                         voltage"
+	 *    COMD[0] "Snapshot option"
+	 *                  =   0 (0x00) .......0 "Enable live video output
+	 *                                         after snapshot sequence"
+	 */
+	{ 0x0c, 0x08 },
+
+	/*
+	 * 0D COME "Common Control E"
+	 *                  = 161 (0xA1) 10100001
+	 *    COME[7] "Output average option"
+	 *                  =   1 (0x01) 1....... "Output average of 4 pixels"
+	 *    COME[6] "Anti-blooming control"
+	 *                  =   0 (0x00) .0...... "Off"
+	 *    COME[5:3] "Reserved"
+	 *                  =   4 (0x04) ..100...
+	 *    COME[2] "Clock output power down pin status"
+	 *                  =   0 (0x00) .....0.. "Tri-state data output pin
+	 *                                         on power down"
+	 *    COME[1] "Data output pin status selection at power down"
+	 *                  =   0 (0x00) ......0. "Tri-state VSYNC, PCLK,
+	 *                                         HREF, and CHSYNC pins on
+	 *                                         power down"
+	 *    COME[0] "Auto zero circuit select"
+	 *                  =   1 (0x01) .......1 "On"
+	 */
+	{ 0x0d, 0xA1 },
+
+	/*
+	 * 0E COMF "Common Control F"
+	 *                  = 112 (0x70) 01110000
+	 *    COMF[7] "System clock selection"
+	 *                  =   0 (0x00) 0....... "Use 24 MHz system clock"
+	 *    COMF[6:4] "Reserved"
+	 *                  =   7 (0x07) .111....
+	 *    COMF[3] "Manual auto negative offset canceling selection"
+	 *                  =   0 (0x00) ....0... "Auto detect negative
+	 *                                         offset and cancel it"
+	 *    COMF[2:0] "Reserved"
+	 *                  =   0 (0x00) .....000
+	 */
+	{ 0x0e, 0x70 },
+
+	/*
+	 * 0F COMG "Common Control G"
+	 *                  =  66 (0x42) 01000010
+	 *    COMG[7] "Optical black output selection"
+	 *                  =   0 (0x00) 0....... "Disable"
+	 *    COMG[6] "Black level calibrate selection"
+	 *                  =   1 (0x01) .1...... "Use optical black pixels
+	 *                                         to calibrate"
+	 *    COMG[5:4] "Reserved"
+	 *                  =   0 (0x00) ..00....
+	 *    COMG[3] "Channel offset adjustment"
+	 *                  =   0 (0x00) ....0... "Disable offset adjustment"
+	 *    COMG[2] "ADC black level calibration option"
+	 *                  =   0 (0x00) .....0.. "Use B/G line and G/R
+	 *                                         line to calibrate each
+	 *                                         channel's black level"
+	 *    COMG[1] "Reserved"
+	 *                  =   1 (0x01) ......1.
+	 *    COMG[0] "ADC black level calibration enable"
+	 *                  =   0 (0x00) .......0 "Disable"
+	 */
+	{ 0x0f, 0x42 },
+
+	/*
+	 * 14 COMJ "Common Control J"
+	 *                  = 198 (0xC6) 11000110
+	 *    COMJ[7:6] "AGC gain ceiling"
+	 *                  =   3 (0x03) 11...... "8x"
+	 *    COMJ[5:4] "Reserved"
+	 *                  =   0 (0x00) ..00....
+	 *    COMJ[3] "Auto banding filter"
+	 *                  =   0 (0x00) ....0... "Banding filter is always
+	 *                                         on off depending on
+	 *                                         COMI[5] setting"
+	 *    COMJ[2] "VSYNC drop option"
+	 *                  =   1 (0x01) .....1.. "SYNC is dropped if frame
+	 *                                         data is dropped"
+	 *    COMJ[1] "Frame data drop"
+	 *                  =   1 (0x01) ......1. "Drop frame data if
+	 *                                         exposure is not within
+	 *                                         tolerance.  In AEC mode,
+	 *                                         data is normally dropped
+	 *                                         when data is out of
+	 *                                         range."
+	 *    COMJ[0] "Reserved"
+	 *                  =   0 (0x00) .......0
+	 */
+	{ 0x14, 0xC6 },
+
+	/*
+	 * 15 COMK "Common Control K"
+	 *                  =   2 (0x02) 00000010
+	 *    COMK[7] "CHSYNC pin output swap"
+	 *                  =   0 (0x00) 0....... "CHSYNC"
+	 *    COMK[6] "HREF pin output swap"
+	 *                  =   0 (0x00) .0...... "HREF"
+	 *    COMK[5] "PCLK output selection"
+	 *                  =   0 (0x00) ..0..... "PCLK always output"
+	 *    COMK[4] "PCLK edge selection"
+	 *                  =   0 (0x00) ...0.... "Data valid on falling edge"
+	 *    COMK[3] "HREF output polarity"
+	 *                  =   0 (0x00) ....0... "positive"
+	 *    COMK[2] "Reserved"
+	 *                  =   0 (0x00) .....0..
+	 *    COMK[1] "VSYNC polarity"
+	 *                  =   1 (0x01) ......1. "negative"
+	 *    COMK[0] "HSYNC polarity"
+	 *                  =   0 (0x00) .......0 "positive"
+	 */
+	{ 0x15, 0x02 },
+
+	/*
+	 * 33 CHLF "Current Control"
+	 *                  =   9 (0x09) 00001001
+	 *    CHLF[7:6] "Sensor current control"
+	 *                  =   0 (0x00) 00......
+	 *    CHLF[5] "Sensor current range control"
+	 *                  =   0 (0x00) ..0..... "normal range"
+	 *    CHLF[4] "Sensor current"
+	 *                  =   0 (0x00) ...0.... "normal current"
+	 *    CHLF[3] "Sensor buffer current control"
+	 *                  =   1 (0x01) ....1... "half current"
+	 *    CHLF[2] "Column buffer current control"
+	 *                  =   0 (0x00) .....0.. "normal current"
+	 *    CHLF[1] "Analog DSP current control"
+	 *                  =   0 (0x00) ......0. "normal current"
+	 *    CHLF[1] "ADC current control"
+	 *                  =   0 (0x00) ......0. "normal current"
+	 */
+	{ 0x33, 0x09 },
+
+	/*
+	 * 34 VBLM "Blooming Control"
+	 *                  =  80 (0x50) 01010000
+	 *    VBLM[7] "Hard soft reset switch"
+	 *                  =   0 (0x00) 0....... "Hard reset"
+	 *    VBLM[6:4] "Blooming voltage selection"
+	 *                  =   5 (0x05) .101....
+	 *    VBLM[3:0] "Sensor current control"
+	 *                  =   0 (0x00) ....0000
+	 */
+	{ 0x34, 0x50 },
+
+	/*
+	 * 36 VCHG "Sensor Precharge Voltage Control"
+	 *                  =   0 (0x00) 00000000
+	 *    VCHG[7] "Reserved"
+	 *                  =   0 (0x00) 0.......
+	 *    VCHG[6:4] "Sensor precharge voltage control"
+	 *                  =   0 (0x00) .000....
+	 *    VCHG[3:0] "Sensor array common reference"
+	 *                  =   0 (0x00) ....0000
+	 */
+	{ 0x36, 0x00 },
+
+	/*
+	 * 37 ADC "ADC Reference Control"
+	 *                  =   4 (0x04) 00000100
+	 *    ADC[7:4] "Reserved"
+	 *                  =   0 (0x00) 0000....
+	 *    ADC[3] "ADC input signal range"
+	 *                  =   0 (0x00) ....0... "Input signal 1.0x"
+	 *    ADC[2:0] "ADC range control"
+	 *                  =   4 (0x04) .....100
+	 */
+	{ 0x37, 0x04 },
+
+	/*
+	 * 38 ACOM "Analog Common Ground"
+	 *                  =  82 (0x52) 01010010
+	 *    ACOM[7] "Analog gain control"
+	 *                  =   0 (0x00) 0....... "Gain 1x"
+	 *    ACOM[6] "Analog black level calibration"
+	 *                  =   1 (0x01) .1...... "On"
+	 *    ACOM[5:0] "Reserved"
+	 *                  =  18 (0x12) ..010010
+	 */
+	{ 0x38, 0x52 },
+
+	/*
+	 * 3A FREFA "Internal Reference Adjustment"
+	 *                  =   0 (0x00) 00000000
+	 *    FREFA[7:0] "Range"
+	 *                  =   0 (0x00) 00000000
+	 */
+	{ 0x3a, 0x00 },
+
+	/*
+	 * 3C FVOPT "Internal Reference Adjustment"
+	 *                  =  31 (0x1F) 00011111
+	 *    FVOPT[7:0] "Range"
+	 *                  =  31 (0x1F) 00011111
+	 */
+	{ 0x3c, 0x1F },
+
+	/*
+	 * 44 Undocumented  =   0 (0x00) 00000000
+	 *    44[7:0] "It's a secret"
+	 *                  =   0 (0x00) 00000000
+	 */
+	{ 0x44, 0x00 },
+
+	/*
+	 * 40 Undocumented  =   0 (0x00) 00000000
+	 *    40[7:0] "It's a secret"
+	 *                  =   0 (0x00) 00000000
+	 */
+	{ 0x40, 0x00 },
+
+	/*
+	 * 41 Undocumented  =   0 (0x00) 00000000
+	 *    41[7:0] "It's a secret"
+	 *                  =   0 (0x00) 00000000
+	 */
+	{ 0x41, 0x00 },
+
+	/*
+	 * 42 Undocumented  =   0 (0x00) 00000000
+	 *    42[7:0] "It's a secret"
+	 *                  =   0 (0x00) 00000000
+	 */
+	{ 0x42, 0x00 },
+
+	/*
+	 * 43 Undocumented  =   0 (0x00) 00000000
+	 *    43[7:0] "It's a secret"
+	 *                  =   0 (0x00) 00000000
+	 */
+	{ 0x43, 0x00 },
+
+	/*
+	 * 45 Undocumented  = 128 (0x80) 10000000
+	 *    45[7:0] "It's a secret"
+	 *                  = 128 (0x80) 10000000
+	 */
+	{ 0x45, 0x80 },
+
+	/*
+	 * 48 Undocumented  = 192 (0xC0) 11000000
+	 *    48[7:0] "It's a secret"
+	 *                  = 192 (0xC0) 11000000
+	 */
+	{ 0x48, 0xC0 },
+
+	/*
+	 * 49 Undocumented  =  25 (0x19) 00011001
+	 *    49[7:0] "It's a secret"
+	 *                  =  25 (0x19) 00011001
+	 */
+	{ 0x49, 0x19 },
+
+	/*
+	 * 4B Undocumented  = 128 (0x80) 10000000
+	 *    4B[7:0] "It's a secret"
+	 *                  = 128 (0x80) 10000000
+	 */
+	{ 0x4B, 0x80 },
+
+	/*
+	 * 4D Undocumented  = 196 (0xC4) 11000100
+	 *    4D[7:0] "It's a secret"
+	 *                  = 196 (0xC4) 11000100
+	 */
+	{ 0x4D, 0xC4 },
+
+	/*
+	 * 35 VREF "Reference Voltage Control"
+	 *                  =  76 (0x4C) 01001100
+	 *    VREF[7:5] "Column high reference control"
+	 *                  =   2 (0x02) 010..... "higher voltage"
+	 *    VREF[4:2] "Column low reference control"
+	 *                  =   3 (0x03) ...011.. "Highest voltage"
+	 *    VREF[1:0] "Reserved"
+	 *                  =   0 (0x00) ......00
+	 */
+	{ 0x35, 0x4C },
+
+	/*
+	 * 3D Undocumented  =   0 (0x00) 00000000
+	 *    3D[7:0] "It's a secret"
+	 *                  =   0 (0x00) 00000000
+	 */
+	{ 0x3D, 0x00 },
+
+	/*
+	 * 3E Undocumented  =   0 (0x00) 00000000
+	 *    3E[7:0] "It's a secret"
+	 *                  =   0 (0x00) 00000000
+	 */
+	{ 0x3E, 0x00 },
+
+	/*
+	 * 3B FREFB "Internal Reference Adjustment"
+	 *                  =  24 (0x18) 00011000
+	 *    FREFB[7:0] "Range"
+	 *                  =  24 (0x18) 00011000
+	 */
+	{ 0x3b, 0x18 },
+
+	/*
+	 * 33 CHLF "Current Control"
+	 *                  =  25 (0x19) 00011001
+	 *    CHLF[7:6] "Sensor current control"
+	 *                  =   0 (0x00) 00......
+	 *    CHLF[5] "Sensor current range control"
+	 *                  =   0 (0x00) ..0..... "normal range"
+	 *    CHLF[4] "Sensor current"
+	 *                  =   1 (0x01) ...1.... "double current"
+	 *    CHLF[3] "Sensor buffer current control"
+	 *                  =   1 (0x01) ....1... "half current"
+	 *    CHLF[2] "Column buffer current control"
+	 *                  =   0 (0x00) .....0.. "normal current"
+	 *    CHLF[1] "Analog DSP current control"
+	 *                  =   0 (0x00) ......0. "normal current"
+	 *    CHLF[1] "ADC current control"
+	 *                  =   0 (0x00) ......0. "normal current"
+	 */
+	{ 0x33, 0x19 },
+
+	/*
+	 * 34 VBLM "Blooming Control"
+	 *                  =  90 (0x5A) 01011010
+	 *    VBLM[7] "Hard soft reset switch"
+	 *                  =   0 (0x00) 0....... "Hard reset"
+	 *    VBLM[6:4] "Blooming voltage selection"
+	 *                  =   5 (0x05) .101....
+	 *    VBLM[3:0] "Sensor current control"
+	 *                  =  10 (0x0A) ....1010
+	 */
+	{ 0x34, 0x5A },
+
+	/*
+	 * 3B FREFB "Internal Reference Adjustment"
+	 *                  =   0 (0x00) 00000000
+	 *    FREFB[7:0] "Range"
+	 *                  =   0 (0x00) 00000000
+	 */
+	{ 0x3b, 0x00 },
+
+	/*
+	 * 33 CHLF "Current Control"
+	 *                  =   9 (0x09) 00001001
+	 *    CHLF[7:6] "Sensor current control"
+	 *                  =   0 (0x00) 00......
+	 *    CHLF[5] "Sensor current range control"
+	 *                  =   0 (0x00) ..0..... "normal range"
+	 *    CHLF[4] "Sensor current"
+	 *                  =   0 (0x00) ...0.... "normal current"
+	 *    CHLF[3] "Sensor buffer current control"
+	 *                  =   1 (0x01) ....1... "half current"
+	 *    CHLF[2] "Column buffer current control"
+	 *                  =   0 (0x00) .....0.. "normal current"
+	 *    CHLF[1] "Analog DSP current control"
+	 *                  =   0 (0x00) ......0. "normal current"
+	 *    CHLF[1] "ADC current control"
+	 *                  =   0 (0x00) ......0. "normal current"
+	 */
+	{ 0x33, 0x09 },
+
+	/*
+	 * 34 VBLM "Blooming Control"
+	 *                  =  80 (0x50) 01010000
+	 *    VBLM[7] "Hard soft reset switch"
+	 *                  =   0 (0x00) 0....... "Hard reset"
+	 *    VBLM[6:4] "Blooming voltage selection"
+	 *                  =   5 (0x05) .101....
+	 *    VBLM[3:0] "Sensor current control"
+	 *                  =   0 (0x00) ....0000
+	 */
+	{ 0x34, 0x50 },
+
+	/*
+	 * 12 COMH "Common Control H"
+	 *                  =  64 (0x40) 01000000
+	 *    COMH[7] "SRST"
+	 *                  =   0 (0x00) 0....... "No-op"
+	 *    COMH[6:4] "Resolution selection"
+	 *                  =   4 (0x04) .100.... "XGA"
+	 *    COMH[3] "Master slave selection"
+	 *                  =   0 (0x00) ....0... "Master mode"
+	 *    COMH[2] "Internal B/R channel option"
+	 *                  =   0 (0x00) .....0.. "B/R use same channel"
+	 *    COMH[1] "Color bar test pattern"
+	 *                  =   0 (0x00) ......0. "Off"
+	 *    COMH[0] "Reserved"
+	 *                  =   0 (0x00) .......0
+	 */
+	{ 0x12, 0x40 },
+
+	/*
+	 * 17 HREFST "Horizontal window start"
+	 *                  =  31 (0x1F) 00011111
+	 *    HREFST[7:0] "Horizontal window start, 8 MSBs"
+	 *                  =  31 (0x1F) 00011111
+	 */
+	{ 0x17, 0x1F },
+
+	/*
+	 * 18 HREFEND "Horizontal window end"
+	 *                  =  95 (0x5F) 01011111
+	 *    HREFEND[7:0] "Horizontal Window End, 8 MSBs"
+	 *                  =  95 (0x5F) 01011111
+	 */
+	{ 0x18, 0x5F },
+
+	/*
+	 * 19 VSTRT "Vertical window start"
+	 *                  =   0 (0x00) 00000000
+	 *    VSTRT[7:0] "Vertical Window Start, 8 MSBs"
+	 *                  =   0 (0x00) 00000000
+	 */
+	{ 0x19, 0x00 },
+
+	/*
+	 * 1A VEND "Vertical window end"
+	 *                  =  96 (0x60) 01100000
+	 *    VEND[7:0] "Vertical Window End, 8 MSBs"
+	 *                  =  96 (0x60) 01100000
+	 */
+	{ 0x1a, 0x60 },
+
+	/*
+	 * 32 COMM "Common Control M"
+	 *                  =  18 (0x12) 00010010
+	 *    COMM[7:6] "Pixel clock divide option"
+	 *                  =   0 (0x00) 00...... "/1"
+	 *    COMM[5:3] "Horizontal window end position, 3 LSBs"
+	 *                  =   2 (0x02) ..010...
+	 *    COMM[2:0] "Horizontal window start position, 3 LSBs"
+	 *                  =   2 (0x02) .....010
+	 */
+	{ 0x32, 0x12 },
+
+	/*
+	 * 03 COMA "Common Control A"
+	 *                  =  74 (0x4A) 01001010
+	 *    COMA[7:4] "AWB Update Threshold"
+	 *                  =   4 (0x04) 0100....
+	 *    COMA[3:2] "Vertical window end line control 2 LSBs"
+	 *                  =   2 (0x02) ....10..
+	 *    COMA[1:0] "Vertical window start line control 2 LSBs"
+	 *                  =   2 (0x02) ......10
+	 */
+	{ 0x03, 0x4A },
+
+	/*
+	 * 11 CLKRC "Clock Rate Control"
+	 *                  = 128 (0x80) 10000000
+	 *    CLKRC[7] "Internal frequency doublers on off seclection"
+	 *                  =   1 (0x01) 1....... "On"
+	 *    CLKRC[6] "Digital video master slave selection"
+	 *                  =   0 (0x00) .0...... "Master mode, sensor
+	 *                                         provides PCLK"
+	 *    CLKRC[5:0] "Clock divider { CLK = PCLK/(1+CLKRC[5:0]) }"
+	 *                  =   0 (0x00) ..000000
+	 */
+	{ 0x11, 0x80 },
+
+	/*
+	 * 12 COMH "Common Control H"
+	 *                  =   0 (0x00) 00000000
+	 *    COMH[7] "SRST"
+	 *                  =   0 (0x00) 0....... "No-op"
+	 *    COMH[6:4] "Resolution selection"
+	 *                  =   0 (0x00) .000.... "QXGA"
+	 *    COMH[3] "Master slave selection"
+	 *                  =   0 (0x00) ....0... "Master mode"
+	 *    COMH[2] "Internal B/R channel option"
+	 *                  =   0 (0x00) .....0.. "B/R use same channel"
+	 *    COMH[1] "Color bar test pattern"
+	 *                  =   0 (0x00) ......0. "Off"
+	 *    COMH[0] "Reserved"
+	 *                  =   0 (0x00) .......0
+	 */
+	{ 0x12, 0x00 },
+
+	/*
+	 * 12 COMH "Common Control H"
+	 *                  =  64 (0x40) 01000000
+	 *    COMH[7] "SRST"
+	 *                  =   0 (0x00) 0....... "No-op"
+	 *    COMH[6:4] "Resolution selection"
+	 *                  =   4 (0x04) .100.... "XGA"
+	 *    COMH[3] "Master slave selection"
+	 *                  =   0 (0x00) ....0... "Master mode"
+	 *    COMH[2] "Internal B/R channel option"
+	 *                  =   0 (0x00) .....0.. "B/R use same channel"
+	 *    COMH[1] "Color bar test pattern"
+	 *                  =   0 (0x00) ......0. "Off"
+	 *    COMH[0] "Reserved"
+	 *                  =   0 (0x00) .......0
+	 */
+	{ 0x12, 0x40 },
+
+	/*
+	 * 17 HREFST "Horizontal window start"
+	 *                  =  31 (0x1F) 00011111
+	 *    HREFST[7:0] "Horizontal window start, 8 MSBs"
+	 *                  =  31 (0x1F) 00011111
+	 */
+	{ 0x17, 0x1F },
+
+	/*
+	 * 18 HREFEND "Horizontal window end"
+	 *                  =  95 (0x5F) 01011111
+	 *    HREFEND[7:0] "Horizontal Window End, 8 MSBs"
+	 *                  =  95 (0x5F) 01011111
+	 */
+	{ 0x18, 0x5F },
+
+	/*
+	 * 19 VSTRT "Vertical window start"
+	 *                  =   0 (0x00) 00000000
+	 *    VSTRT[7:0] "Vertical Window Start, 8 MSBs"
+	 *                  =   0 (0x00) 00000000
+	 */
+	{ 0x19, 0x00 },
+
+	/*
+	 * 1A VEND "Vertical window end"
+	 *                  =  96 (0x60) 01100000
+	 *    VEND[7:0] "Vertical Window End, 8 MSBs"
+	 *                  =  96 (0x60) 01100000
+	 */
+	{ 0x1a, 0x60 },
+
+	/*
+	 * 32 COMM "Common Control M"
+	 *                  =  18 (0x12) 00010010
+	 *    COMM[7:6] "Pixel clock divide option"
+	 *                  =   0 (0x00) 00...... "/1"
+	 *    COMM[5:3] "Horizontal window end position, 3 LSBs"
+	 *                  =   2 (0x02) ..010...
+	 *    COMM[2:0] "Horizontal window start position, 3 LSBs"
+	 *                  =   2 (0x02) .....010
+	 */
+	{ 0x32, 0x12 },
+
+	/*
+	 * 03 COMA "Common Control A"
+	 *                  =  74 (0x4A) 01001010
+	 *    COMA[7:4] "AWB Update Threshold"
+	 *                  =   4 (0x04) 0100....
+	 *    COMA[3:2] "Vertical window end line control 2 LSBs"
+	 *                  =   2 (0x02) ....10..
+	 *    COMA[1:0] "Vertical window start line control 2 LSBs"
+	 *                  =   2 (0x02) ......10
+	 */
+	{ 0x03, 0x4A },
+
+	/*
+	 * 02 RED "Red Gain Control"
+	 *                  = 175 (0xAF) 10101111
+	 *    RED[7] "Action"
+	 *                  =   1 (0x01) 1....... "gain = 1/(1+bitrev([6:0]))"
+	 *    RED[6:0] "Value"
+	 *                  =  47 (0x2F) .0101111
+	 */
+	{ 0x02, 0xAF },
+
+	/*
+	 * 2D ADDVSL "VSYNC Pulse Width"
+	 *                  = 210 (0xD2) 11010010
+	 *    ADDVSL[7:0] "VSYNC pulse width, LSB"
+	 *                  = 210 (0xD2) 11010010
+	 */
+	{ 0x2d, 0xD2 },
+
+	/*
+	 * 00 GAIN          =  24 (0x18) 00011000
+	 *    GAIN[7:6] "Reserved"
+	 *                  =   0 (0x00) 00......
+	 *    GAIN[5] "Double"
+	 *                  =   0 (0x00) ..0..... "False"
+	 *    GAIN[4] "Double"
+	 *                  =   1 (0x01) ...1.... "True"
+	 *    GAIN[3:0] "Range"
+	 *                  =   8 (0x08) ....1000
+	 */
+	{ 0x00, 0x18 },
+
+	/*
+	 * 01 BLUE "Blue Gain Control"
+	 *                  = 240 (0xF0) 11110000
+	 *    BLUE[7] "Action"
+	 *                  =   1 (0x01) 1....... "gain = 1/(1+bitrev([6:0]))"
+	 *    BLUE[6:0] "Value"
+	 *                  = 112 (0x70) .1110000
+	 */
+	{ 0x01, 0xF0 },
+
+	/*
+	 * 10 AEC "Automatic Exposure Control"
+	 *                  =  10 (0x0A) 00001010
+	 *    AEC[7:0] "Automatic Exposure Control, 8 MSBs"
+	 *                  =  10 (0x0A) 00001010
+	 */
+	{ 0x10, 0x0A },
+
+	{ 0xE1, 0x67 },
+	{ 0xE3, 0x03 },
+	{ 0xE4, 0x26 },
+	{ 0xE5, 0x3E },
+	{ 0xF8, 0x01 },
+	{ 0xFF, 0x01 },
+};
+
 static const struct ov_i2c_regvals norm_6x20[] = {
 	{ 0x12, 0x80 }, /* reset */
 	{ 0x11, 0x01 },
@@ -1514,6 +2271,39 @@ static int write_i2c_regvals(struct sd *sd,
  *
  ***************************************************************************/
 
+/* This initializes the OV2x10 / OV3610 / OV3620 */
+static int ov_hires_configure(struct sd *sd)
+{
+	int high, low;
+
+	if (sd->bridge != BRIDGE_OVFX2) {
+		PDEBUG(D_ERR, "error hires sensors only supported with ovfx2");
+		return -1;
+	}
+
+	PDEBUG(D_PROBE, "starting ov hires configuration");
+
+	/* Detect sensor (sub)type */
+	high = i2c_r(sd, 0x0a);
+	low = i2c_r(sd, 0x0b);
+	/* info("%x, %x", high, low); */
+	if (high == 0x96 && low == 0x40) {
+		PDEBUG(D_PROBE, "Sensor is an OV2610");
+		sd->sensor = SEN_OV2610;
+	} else if (high == 0x36 && (low & 0x0f) == 0x00) {
+		PDEBUG(D_PROBE, "Sensor is an OV3610");
+		sd->sensor = SEN_OV3610;
+	} else {
+		PDEBUG(D_ERR, "Error unknown sensor type: 0x%02x%02x",
+		       high, low);
+		return -1;
+	}
+
+	/* Set sensor-specific vars */
+	return 0;
+}
+
+
 /* This initializes the OV8110, OV8610 sensor. The OV8110 uses
  * the same register settings as the OV8610, since they are very similar.
  */
@@ -2024,6 +2814,12 @@ static int sd_config(struct gspca_dev *gspca_dev,
 			PDEBUG(D_ERR, "Failed to configure OV8xx0");
 			goto error;
 		}
+	/* Test for 3xxx / 2xxx */
+	} else if (init_ov_sensor(sd, OV_HIRES_SID) >= 0) {
+		if (ov_hires_configure(sd) < 0) {
+			PDEBUG(D_ERR, "Failed to configure high res OV");
+			goto error;
+		}
 	} else {
 		PDEBUG(D_ERR, "Can't determine sensor slave IDs");
 		goto error;
@@ -2060,6 +2856,21 @@ static int sd_config(struct gspca_dev *gspca_dev,
 			cam->nmodes = ARRAY_SIZE(ov519_sif_mode);
 		}
 		break;
+	case BRIDGE_OVFX2:
+		if (sd->sensor == SEN_OV2610) {
+			cam->cam_mode = ovfx2_ov2610_mode;
+			cam->nmodes = ARRAY_SIZE(ovfx2_ov2610_mode);
+		} else if (sd->sensor == SEN_OV3610) {
+			cam->cam_mode = ovfx2_ov3610_mode;
+			cam->nmodes = ARRAY_SIZE(ovfx2_ov3610_mode);
+		} else if (!sd->sif) {
+			cam->cam_mode = ov519_vga_mode;
+			cam->nmodes = ARRAY_SIZE(ov519_vga_mode);
+		} else {
+			cam->cam_mode = ov519_sif_mode;
+			cam->nmodes = ARRAY_SIZE(ov519_sif_mode);
+		}
+		break;
 	}
 	sd->brightness = BRIGHTNESS_DEF;
 	if (sd->sensor == SEN_OV6630 || sd->sensor == SEN_OV66308AF)
@@ -2083,6 +2894,9 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	/* OV8610 Frequency filter control should work but needs testing */
 	if (sd->sensor == SEN_OV8610)
 		gspca_dev->ctrl_dis |= 1 << FREQ_IDX;
+	/* No controls for the OV2610/OV3610 */
+	if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610)
+		gspca_dev->ctrl_dis |= 0xFF;
 
 	return 0;
 error:
@@ -2097,6 +2911,20 @@ static int sd_init(struct gspca_dev *gspca_dev)
 
 	/* initialize the sensor */
 	switch (sd->sensor) {
+	case SEN_OV2610:
+		if (write_i2c_regvals(sd, norm_2610, ARRAY_SIZE(norm_2610)))
+			return -EIO;
+		/* Enable autogain, autoexpo, awb, bandfilter */
+		if (i2c_w_mask(sd, 0x13, 0x27, 0x27) < 0)
+			return -EIO;
+		break;
+	case SEN_OV3610:
+		if (write_i2c_regvals(sd, norm_3620b, ARRAY_SIZE(norm_3620b)))
+			return -EIO;
+		/* Enable autogain, autoexpo, awb, bandfilter */
+		if (i2c_w_mask(sd, 0x13, 0x27, 0x27) < 0)
+			return -EIO;
+		break;
 	case SEN_OV6620:
 		if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20)))
 			return -EIO;
@@ -2546,6 +3374,42 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 
 	/******** Mode (VGA/QVGA) and sensor specific regs ********/
 	switch (sd->sensor) {
+	case SEN_OV2610:
+		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
+		i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20);
+		i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a);
+		i2c_w(sd, 0x25, qvga ? 0x30 : 0x60);
+		i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40);
+		i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0);
+		i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20);
+		return 0;
+	case SEN_OV3610: {
+		int xstart, xend, ystart, yend;
+
+		if (qvga) {
+			xstart = (1040 - gspca_dev->width) / 2 + (0x1f << 4);
+			ystart = (772 - gspca_dev->height) / 2;
+		} else {
+			xstart = (2080 - gspca_dev->width) / 2 + (0x10 << 4);
+			ystart = (1544 - gspca_dev->height) / 2;
+		}
+		xend = xstart + gspca_dev->width;
+		yend = ystart + gspca_dev->height;
+		/* Writing to the COMH register resets the other windowing regs
+		   to their default values, so we must do this first. */
+		i2c_w_mask(sd, 0x12, qvga ? 0x40 : 0x00, 0xf0);
+		i2c_w_mask(sd, 0x32,
+			   (((xend >> 1) & 7) << 3) | ((xstart >> 1) & 7),
+			   0x3f);
+		i2c_w_mask(sd, 0x03,
+			   (((yend >> 1) & 3) << 2) | ((ystart >> 1) & 3),
+			   0x0f);
+		i2c_w(sd, 0x17, xstart >> 4);
+		i2c_w(sd, 0x18, xend >> 4);
+		i2c_w(sd, 0x19, ystart >> 3);
+		i2c_w(sd, 0x1a, yend >> 3);
+		return 0;
+	}
 	case SEN_OV8610:
 		/* For OV8610 qvga means qsvga */
 		i2c_w_mask(sd, OV7610_REG_COM_C, qvga ? (1 << 5) : 0, 1 << 5);
@@ -2653,6 +3517,10 @@ static int set_ov_sensor_window(struct sd *sd)
 	int ret, hstart, hstop, vstop, vstart;
 	__u8 v;
 
+	/* mode setup is fully handled in mode_init_ov_sensor_regs for these */
+	if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610)
+		return mode_init_ov_sensor_regs(sd);
+
 	gspca_dev = &sd->gspca_dev;
 	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1;
 	crop = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 2;
@@ -3115,7 +3983,8 @@ static void setcolors(struct gspca_dev *gspca_dev)
 
 static void setautobrightness(struct sd *sd)
 {
-	if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670)
+	if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670 ||
+	    sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610)
 		return;
 
 	i2c_w_mask(sd, 0x2d, sd->autobrightness ? 0x10 : 0x00, 0x10);
@@ -3123,6 +3992,9 @@ static void setautobrightness(struct sd *sd)
 
 static void setfreq(struct sd *sd)
 {
+	if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610)
+		return;
+
 	if (sd->sensor == SEN_OV7670) {
 		switch (sd->freq) {
 		case 0: /* Banding filter disabled */