diff options
| author | David S. Miller <davem@davemloft.net> | 2009-02-24 12:50:29 +0100 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2009-02-24 12:50:29 +0100 |
| commit | e70049b9e74267dd47e1ffa62302073487afcb48 (patch) | |
| tree | 2cd000c0751ef31c9044b020d63f278cdf4f332d /drivers | |
| parent | Doc: Refer to ip-sysctl.txt for strict vs. loose rp_filter mode (diff) | |
| parent | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 (diff) | |
| download | linux-e70049b9e74267dd47e1ffa62302073487afcb48.tar.xz linux-e70049b9e74267dd47e1ffa62302073487afcb48.zip | |
Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Diffstat (limited to 'drivers')
147 files changed, 6719 insertions, 639 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index a7799a99f2d9..8a851d0f4384 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -254,13 +254,6 @@ config ACPI_PCI_SLOT help you correlate PCI bus addresses with the physical geography of your slots. If you are unsure, say N. -config ACPI_SYSTEM - bool - default y - help - This driver will enable your system to shut down using ACPI, and - dump your ACPI DSDT table using /proc/acpi/dsdt. - config X86_PM_TIMER bool "Power Management Timer Support" if EMBEDDED depends on X86 diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 65d90c720b5a..b130ea0d0759 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -52,7 +52,7 @@ obj-$(CONFIG_ACPI_PROCESSOR) += processor.o obj-$(CONFIG_ACPI_CONTAINER) += container.o obj-$(CONFIG_ACPI_THERMAL) += thermal.o obj-y += power.o -obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o +obj-y += system.o event.o obj-$(CONFIG_ACPI_DEBUG) += debug.o obj-$(CONFIG_ACPI_NUMA) += numa.o obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 65132f920459..69cbc57c2d1c 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -138,6 +138,29 @@ static int acpi_battery_technology(struct acpi_battery *battery) static int acpi_battery_get_state(struct acpi_battery *battery); +static int acpi_battery_is_charged(struct acpi_battery *battery) +{ + /* either charging or discharging */ + if (battery->state != 0) + return 0; + + /* battery not reporting charge */ + if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN || + battery->capacity_now == 0) + return 0; + + /* good batteries update full_charge as the batteries degrade */ + if (battery->full_charge_capacity == battery->capacity_now) + return 1; + + /* fallback to using design values for broken batteries */ + if (battery->design_capacity == battery->capacity_now) + return 1; + + /* we don't do any sort of metric based on percentages */ + return 0; +} + static int acpi_battery_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -155,7 +178,7 @@ static int acpi_battery_get_property(struct power_supply *psy, val->intval = POWER_SUPPLY_STATUS_DISCHARGING; else if (battery->state & 0x02) val->intval = POWER_SUPPLY_STATUS_CHARGING; - else if (battery->state == 0) + else if (acpi_battery_is_charged(battery)) val->intval = POWER_SUPPLY_STATUS_FULL; else val->intval = POWER_SUPPLY_STATUS_UNKNOWN; diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 5c2f5d343be6..2fe15060dcdc 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -120,6 +120,8 @@ static struct acpi_ec { spinlock_t curr_lock; } *boot_ec, *first_ec; +static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */ + /* -------------------------------------------------------------------------- Transaction Management -------------------------------------------------------------------------- */ @@ -259,6 +261,8 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); acpi_disable_gpe(NULL, ec->gpe); } + if (EC_FLAGS_MSI) + udelay(ACPI_EC_DELAY); /* start transaction */ spin_lock_irqsave(&ec->curr_lock, tmp); /* following two actions should be kept atomic */ @@ -967,6 +971,11 @@ int __init acpi_ec_ecdt_probe(void) /* * Generate a boot ec context */ + if (dmi_name_in_vendors("Micro-Star") || + dmi_name_in_vendors("Notebook")) { + pr_info(PREFIX "Enabling special treatment for EC from MSI.\n"); + EC_FLAGS_MSI = 1; + } status = acpi_get_table(ACPI_SIG_ECDT, 1, (struct acpi_table_header **)&ecdt_ptr); if (ACPI_SUCCESS(status)) { diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 0b299b0f8172..714cb046b594 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -773,18 +773,32 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf, else iowrite32_rep(data_addr, buf, words); + /* Transfer trailing bytes, if any */ if (unlikely(slop)) { - __le32 pad; + unsigned char pad[4]; + + /* Point buf to the tail of buffer */ + buf += buflen - slop; + + /* + * Use io*_rep() accessors here as well to avoid pointlessly + * swapping bytes to and fro on the big endian machines... + */ if (rw == READ) { - pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); - memcpy(buf + buflen - slop, &pad, slop); + if (slop < 3) + ioread16_rep(data_addr, pad, 1); + else + ioread32_rep(data_addr, pad, 1); + memcpy(buf, pad, slop); } else { - memcpy(&pad, buf + buflen - slop, slop); - iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); + memcpy(pad, buf, slop); + if (slop < 3) + iowrite16_rep(data_addr, pad, 1); + else + iowrite32_rep(data_addr, pad, 1); } - words++; } - return words << 2; + return (buflen + 1) & ~1; } EXPORT_SYMBOL_GPL(ata_sff_data_xfer32); diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 79a6c9a0b721..ba556d3e6963 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -110,7 +110,8 @@ static const struct via_isa_bridge { { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, - { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES}, + { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, + { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, @@ -593,6 +594,7 @@ static int via_reinit_one(struct pci_dev *pdev) #endif static const struct pci_device_id via[] = { + { PCI_VDEVICE(VIA, 0x0415), }, { PCI_VDEVICE(VIA, 0x0571), }, { PCI_VDEVICE(VIA, 0x0581), }, { PCI_VDEVICE(VIA, 0x1571), }, diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 444af0415ca1..55a8eed3f3a3 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -421,19 +421,21 @@ static struct ata_port_operations nv_generic_ops = { .hardreset = ATA_OP_NULL, }; -/* OSDL bz3352 reports that nf2/3 controllers can't determine device - * signature reliably. Also, the following thread reports detection - * failure on cold boot with the standard debouncing timing. +/* nf2 is ripe with hardreset related problems. + * + * kernel bz#3352 reports nf2/3 controllers can't determine device + * signature reliably. The following thread reports detection failure + * on cold boot with the standard debouncing timing. * * http://thread.gmane.org/gmane.linux.ide/34098 * - * Debounce with hotplug timing and request follow-up SRST. + * And bz#12176 reports that hardreset simply doesn't work on nf2. + * Give up on it and just don't do hardreset. */ static struct ata_port_operations nv_nf2_ops = { - .inherits = &nv_common_ops, + .inherits = &nv_generic_ops, .freeze = nv_nf2_freeze, .thaw = nv_nf2_thaw, - .hardreset = nv_noclassify_hardreset, }; /* For initial probing after boot and hot plugging, hardreset mostly diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c index 144a49f15220..8733a2ea04c2 100644 --- a/drivers/atm/lanai.c +++ b/drivers/atm/lanai.c @@ -901,7 +901,7 @@ static int __devinit eeprom_read(struct lanai_dev *lanai) clock_l(); udelay(5); for (i = 128; i != 0; i >>= 1) { /* write command out */ tmp = (lanai->conf1 & ~CONFIG1_PROMDATA) | - (data & i) ? CONFIG1_PROMDATA : 0; + ((data & i) ? CONFIG1_PROMDATA : 0); if (lanai->conf1 != tmp) { set_config1(tmp); udelay(5); /* Let new data settle */ diff --git a/drivers/base/base.h b/drivers/base/base.h index 0a5f055dffba..9f50f1b545dc 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -88,8 +88,6 @@ extern void driver_detach(struct device_driver *drv); extern int driver_probe_device(struct device_driver *drv, struct device *dev); extern void sysdev_shutdown(void); -extern int sysdev_suspend(pm_message_t state); -extern int sysdev_resume(void); extern char *make_class_name(const char *name, struct kobject *kobj); diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 315bed8d5e7f..135231239103 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -18,9 +18,11 @@ */ #include <linux/device.h> +#include <linux/delay.h> #include <linux/module.h> #include <linux/kthread.h> #include <linux/wait.h> +#include <linux/async.h> #include "base.h" #include "power/power.h" @@ -168,6 +170,21 @@ int driver_probe_done(void) } /** + * wait_for_device_probe + * Wait for device probing to be completed. + * + * Note: this function polls at 100 msec intervals. + */ +int wait_for_device_probe(void) +{ + /* wait for the known devices to complete their probing */ + while (driver_probe_done() != 0) + msleep(100); + async_synchronize_full(); + return 0; +} + +/** * driver_probe_device - attempt to bind device & driver together * @drv: driver to bind a device to * @dev: device to try to bind to the driver diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 670c9d6c1407..2d14f4ae6c01 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -333,7 +333,6 @@ static void dpm_power_up(pm_message_t state) */ void device_power_up(pm_message_t state) { - sysdev_resume(); dpm_power_up(state); } EXPORT_SYMBOL_GPL(device_power_up); @@ -577,8 +576,6 @@ int device_power_down(pm_message_t state) } dev->power.status = DPM_OFF_IRQ; } - if (!error) - error = sysdev_suspend(state); if (error) dpm_power_up(resume_event(state)); return error; diff --git a/drivers/base/sys.c b/drivers/base/sys.c index c98c31ec2f75..b428c8c4bc64 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -303,7 +303,6 @@ void sysdev_unregister(struct sys_device * sysdev) * is guaranteed by virtue of the fact that child devices are registered * after their parents. */ - void sysdev_shutdown(void) { struct sysdev_class * cls; @@ -363,7 +362,6 @@ static void __sysdev_resume(struct sys_device *dev) * This is only called by the device PM core, so we let them handle * all synchronization. */ - int sysdev_suspend(pm_message_t state) { struct sysdev_class * cls; @@ -432,7 +430,7 @@ aux_driver: } return ret; } - +EXPORT_SYMBOL_GPL(sysdev_suspend); /** * sysdev_resume - Bring system devices back to life. @@ -442,7 +440,6 @@ aux_driver: * * Note: Interrupts are disabled when called. */ - int sysdev_resume(void) { struct sysdev_class * cls; @@ -463,7 +460,7 @@ int sysdev_resume(void) } return 0; } - +EXPORT_SYMBOL_GPL(sysdev_resume); int __init system_bus_init(void) { diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h index c237527b1aa5..5e41e6dd657b 100644 --- a/drivers/block/aoe/aoe.h +++ b/drivers/block/aoe/aoe.h @@ -18,6 +18,7 @@ enum { AOECMD_ATA, AOECMD_CFG, + AOECMD_VEND_MIN = 0xf0, AOEFL_RSP = (1<<3), AOEFL_ERR = (1<<2), diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c index 30de5b1c647e..c6099ba9a4b8 100644 --- a/drivers/block/aoe/aoenet.c +++ b/drivers/block/aoe/aoenet.c @@ -142,6 +142,8 @@ aoenet_rcv(struct sk_buff *skb, struct net_device *ifp, struct packet_type *pt, aoecmd_cfg_rsp(skb); break; default: + if (h->cmd >= AOECMD_VEND_MIN) + break; /* don't complain about vendor commands */ printk(KERN_INFO "aoe: unknown cmd %d\n", h->cmd); } exit: diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c index 69e1df7dfa14..4234c11c1e4c 100644 --- a/drivers/block/ataflop.c +++ b/drivers/block/ataflop.c @@ -1730,7 +1730,7 @@ static int __init fd_test_drive_present( int drive ) timeout = jiffies + 2*HZ+HZ/2; while (time_before(jiffies, timeout)) - if (!(mfp.par_dt_reg & 0x20)) + if (!(st_mfp.par_dt_reg & 0x20)) break; status = FDC_READ( FDCREG_STATUS ); @@ -1747,7 +1747,7 @@ static int __init fd_test_drive_present( int drive ) /* dummy seek command to make WP bit accessible */ FDC_WRITE( FDCREG_DATA, 0 ); FDC_WRITE( FDCREG_CMD, FDCCMD_SEEK ); - while( mfp.par_dt_reg & 0x20 ) + while( st_mfp.par_dt_reg & 0x20 ) ; status = FDC_READ( FDCREG_STATUS ); } diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 01e69383d9c0..d2cb67b61176 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -3390,6 +3390,203 @@ static void free_hba(int i) kfree(p); } +/* Send a message CDB to the firmware. */ +static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, unsigned char type) +{ + typedef struct { + CommandListHeader_struct CommandHeader; + RequestBlock_struct Request; + ErrDescriptor_struct ErrorDescriptor; + } Command; + static const size_t cmd_sz = sizeof(Command) + sizeof(ErrorInfo_struct); + Command *cmd; + dma_addr_t paddr64; + uint32_t paddr32, tag; + void __iomem *vaddr; + int i, err; + + vaddr = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); + if (vaddr == NULL) + return -ENOMEM; + + /* The Inbound Post Queue only accepts 32-bit physical addresses for the + CCISS commands, so they must be allocated from the lower 4GiB of + memory. */ + err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + iounmap(vaddr); + return -ENOMEM; + } + + cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64); + if (cmd == NULL) { + iounmap(vaddr); + return -ENOMEM; + } + + /* This must fit, because of the 32-bit consistent DMA mask. Also, + although there's no guarantee, we assume that the address is at + least 4-byte aligned (most likely, it's page-aligned). */ + paddr32 = paddr64; + + cmd->CommandHeader.ReplyQueue = 0; + cmd->CommandHeader.SGList = 0; + cmd->CommandHeader.SGTotal = 0; + cmd->CommandHeader.Tag.lower = paddr32; + cmd->CommandHeader.Tag.upper = 0; + memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8); + + cmd->Request.CDBLen = 16; + cmd->Request.Type.Type = TYPE_MSG; + cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE; + cmd->Request.Type.Direction = XFER_NONE; + cmd->Request.Timeout = 0; /* Don't time out */ + cmd->Request.CDB[0] = opcode; + cmd->Request.CDB[1] = type; + memset(&cmd->Request.CDB[2], 0, 14); /* the rest of the CDB is reserved */ + + cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(Command); + cmd->ErrorDescriptor.Addr.upper = 0; + cmd->ErrorDescriptor.Len = sizeof(ErrorInfo_struct); + + writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET); + + for (i = 0; i < 10; i++) { + tag = readl(vaddr + SA5_REPLY_PORT_OFFSET); + if ((tag & ~3) == paddr32) + break; + schedule_timeout_uninterruptible(HZ); + } + + iounmap(vaddr); + + /* we leak the DMA buffer here ... no choice since the controller could + still complete the command. */ + if (i == 10) { + printk(KERN_ERR "cciss: controller message %02x:%02x timed out\n", + opcode, type); + return -ETIMEDOUT; + } + + pci_free_consistent(pdev, cmd_sz, cmd, paddr64); + + if (tag & 2) { + printk(KERN_ERR "cciss: controller message %02x:%02x failed\n", + opcode, type); + return -EIO; + } + + printk(KERN_INFO "cciss: controller message %02x:%02x succeeded\n", + opcode, type); + return 0; +} + +#define cciss_soft_reset_controller(p) cciss_message(p, 1, 0) +#define cciss_noop(p) cciss_message(p, 3, 0) + +static __devinit int cciss_reset_msi(struct pci_dev *pdev) +{ +/* the #defines are stolen from drivers/pci/msi.h. */ +#define msi_control_reg(base) (base + PCI_MSI_FLAGS) +#define PCI_MSIX_FLAGS_ENABLE (1 << 15) + + int pos; + u16 control = 0; + + pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); + if (pos) { + pci_read_config_word(pdev, msi_control_reg(pos), &control); + if (control & PCI_MSI_FLAGS_ENABLE) { + printk(KERN_INFO "cciss: resetting MSI\n"); + pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE); + } + } + + pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); + if (pos) { + pci_read_config_word(pdev, msi_control_reg(pos), &control); + if (control & PCI_MSIX_FLAGS_ENABLE) { + printk(KERN_INFO "cciss: resetting MSI-X\n"); + pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE); + } + } + + return 0; +} + +/* This does a hard reset of the controller using PCI power management + * states. */ +static __devinit int cciss_hard_reset_controller(struct pci_dev *pdev) +{ + u16 pmcsr, saved_config_space[32]; + int i, pos; + + printk(KERN_INFO "cciss: using PCI PM to reset controller\n"); + + /* This is very nearly the same thing as + + pci_save_state(pci_dev); + pci_set_power_state(pci_dev, PCI_D3hot); + pci_set_power_state(pci_dev, PCI_D0); + pci_restore_state(pci_dev); + + but we can't use these nice canned kernel routines on + kexec, because they also check the MSI/MSI-X state in PCI + configuration space and do the wrong thing when it is + set/cleared. Also, the pci_save/restore_state functions + violate the ordering requirements for restoring the + configuration space from the CCISS document (see the + comment below). So we roll our own .... */ + + for (i = 0; i < 32; i++) + pci_read_config_word(pdev, 2*i, &saved_config_space[i]); + + pos = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (pos == 0) { + printk(KERN_ERR "cciss_reset_controller: PCI PM not supported\n"); + return -ENODEV; + } + + /* Quoting from the Open CISS Specification: "The Power + * Management Control/Status Register (CSR) controls the power + * state of the device. The normal operating state is D0, + * CSR=00h. The software off state is D3, CSR=03h. To reset + * the controller, place the interface device in D3 then to + * D0, this causes a secondary PCI reset which will reset the + * controller." */ + + /* enter the D3hot power management state */ + pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr); + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= PCI_D3hot; + pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + + schedule_timeout_uninterruptible(HZ >> 1); + + /* enter the D0 power management state */ + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= PCI_D0; + pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + + schedule_timeout_uninterruptible(HZ >> 1); + + /* Restore the PCI configuration space. The Open CISS + * Specification says, "Restore the PCI Configuration + * Registers, offsets 00h through 60h. It is important to + * restore the command register, 16-bits at offset 04h, + * last. Do not restore the configuration status register, + * 16-bits at offset 06h." Note that the offset is 2*i. */ + for (i = 0; i < 32; i++) { + if (i == 2 || i == 3) + continue; + pci_write_config_word(pdev, 2*i, saved_config_space[i]); + } + wmb(); + pci_write_config_word(pdev, 4, saved_config_space[2]); + + return 0; +} + /* * This is it. Find all the controllers and register them. I really hate * stealing all these major device numbers. @@ -3404,6 +3601,24 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, int dac, return_code; InquiryData_struct *inq_buff = NULL; + if (reset_devices) { + /* Reset the controller with a PCI power-cycle */ + if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev)) + return -ENODEV; + + /* Some devices (notably the HP Smart Array 5i Controller) + need a little pause here */ + schedule_timeout_uninterruptible(30*HZ); + + /* Now try to get the controller to respond to a no-op */ + for (i=0; i<12; i++) { + if (cciss_noop(pdev) == 0) + break; + else + printk("cciss: no-op failed%s\n", (i < 11 ? "; re-trying" : "")); + } + } + i = alloc_cciss_hba(); if (i < 0) return -1; diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index cf29cc4e6ab7..83d8ed39433d 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -558,6 +558,8 @@ static void process_fd_request(void); static void recalibrate_floppy(void); static void floppy_shutdown(unsigned long); +static int floppy_request_regions(int); +static void floppy_release_regions(int); static int floppy_grab_irq_and_dma(void); static void floppy_release_irq_and_dma(void); @@ -4274,8 +4276,7 @@ static int __init floppy_init(void) FDCS->rawcmd = 2; if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) { /* free ioports reserved by floppy_grab_irq_and_dma() */ - release_region(FDCS->address + 2, 4); - release_region(FDCS->address + 7, 1); + floppy_release_regions(fdc); FDCS->address = -1; FDCS->version = FDC_NONE; continue; @@ -4284,8 +4285,7 @@ static int __init floppy_init(void) FDCS->version = get_fdc_version(); if (FDCS->version == FDC_NONE) { /* free ioports reserved by floppy_grab_irq_and_dma() */ - release_region(FDCS->address + 2, 4); - release_region(FDCS->address + 7, 1); + floppy_release_regions(fdc); FDCS->address = -1; continue; } @@ -4358,6 +4358,47 @@ out_put_disk: static DEFINE_SPINLOCK(floppy_usage_lock); +static const struct io_region { + int offset; + int size; +} io_regions[] = { + { 2, 1 }, + /* address + 3 is sometimes reserved by pnp bios for motherboard */ + { 4, 2 }, + /* address + 6 is reserved, and may be taken by IDE. + * Unfortunately, Adaptec doesn't know this :-(, */ + { 7, 1 }, +}; + +static void floppy_release_allocated_regions(int fdc, const struct io_region *p) +{ + while (p != io_regions) { + p--; + release_region(FDCS->address + p->offset, p->size); + } +} + +#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)])) + +static int floppy_request_regions(int fdc) +{ + const struct io_region *p; + + for (p = io_regions; p < ARRAY_END(io_regions); p++) { + if (!request_region(FDCS->address + p->offset, p->size, "floppy")) { + DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset); + floppy_release_allocated_regions(fdc, p); + return -EBUSY; + } + } + return 0; +} + +static void floppy_release_regions(int fdc) +{ + floppy_release_allocated_regions(fdc, ARRAY_END(io_regions)); +} + static int floppy_grab_irq_and_dma(void) { unsigned long flags; @@ -4399,18 +4440,8 @@ static int floppy_grab_irq_and_dma(void) for (fdc = 0; fdc < N_FDC; fdc++) { if (FDCS->address != -1) { - if (!request_region(FDCS->address + 2, 4, "floppy")) { - DPRINT("Floppy io-port 0x%04lx in use\n", - FDCS->address + 2); - goto cleanup1; - } - if (!request_region(FDCS->address + 7, 1, "floppy DIR")) { - DPRINT("Floppy io-port 0x%04lx in use\n", - FDCS->address + 7); - goto cleanup2; - } - /* address + 6 is reserved, and may be taken by IDE. - * Unfortunately, Adaptec doesn't know this :-(, */ + if (floppy_request_regions(fdc)) + goto cleanup; } } for (fdc = 0; fdc < N_FDC; fdc++) { @@ -4432,15 +4463,11 @@ static int floppy_grab_irq_and_dma(void) fdc = 0; irqdma_allocated = 1; return 0; -cleanup2: - release_region(FDCS->address + 2, 4); -cleanup1: +cleanup: fd_free_irq(); fd_free_dma(); - while (--fdc >= 0) { - release_region(FDCS->address + 2, 4); - release_region(FDCS->address + 7, 1); - } + while (--fdc >= 0) + floppy_release_regions(fdc); spin_lock_irqsave(&floppy_usage_lock, flags); usage_count--; spin_unlock_irqrestore(&floppy_usage_lock, flags); @@ -4501,10 +4528,8 @@ static void floppy_release_irq_and_dma(void) #endif old_fdc = fdc; for (fdc = 0; fdc < N_FDC; fdc++) - if (FDCS->address != -1) { - release_region(FDCS->address + 2, 4); - release_region(FDCS->address + 7, 1); - } + if (FDCS->address != -1) + floppy_release_regions(fdc); fdc = old_fdc; } diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c index 9dfa27163001..c397b3ddba9b 100644 --- a/drivers/block/paride/pg.c +++ b/drivers/block/paride/pg.c @@ -422,7 +422,7 @@ static void xs(char *buf, char *targ, int len) for (k = 0; k < len; k++) { char c = *buf++; - if (c != ' ' || c != l) + if (c != ' ' && c != l) l = *targ++ = c; } if (l == ' ') diff --git a/drivers/char/scc.h b/drivers/char/scc.h index 93998f5baff5..341b1142bea8 100644 --- a/drivers/char/scc.h +++ b/drivers/char/scc.h @@ -387,7 +387,7 @@ struct scc_port { /* The SCC needs 3.5 PCLK cycles recovery time between to register * accesses. PCLK runs with 8 MHz on an Atari, so this delay is 3.5 * * 125 ns = 437.5 ns. This is too short for udelay(). - * 10/16/95: A tstb mfp.par_dt_reg takes 600ns (sure?) and thus should be + * 10/16/95: A tstb st_mfp.par_dt_reg takes 600ns (sure?) and thus should be * quite right */ diff --git a/drivers/char/sx.c b/drivers/char/sx.c index f146e90404fa..518f2a25d91e 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -1746,9 +1746,10 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd, sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %ld\n", rc); break; case SXIO_DO_RAMTEST: - if (sx_initialized) /* Already initialized: better not ramtest the board. */ + if (sx_initialized) { /* Already initialized: better not ramtest the board. */ rc = -EPERM; break; + } if (IS_SX_BOARD(board)) { rc = do_memtest(board, 0, 0x7000); if (!rc) @@ -1788,7 +1789,7 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd, nbytes - i : SX_CHUNK_SIZE)) { kfree(tmp); rc = -EFAULT; - break; + goto out; } memcpy_toio(board->base2 + offset + i, tmp, (i + SX_CHUNK_SIZE > nbytes) ? diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index a58993011edb..280a9d263eb3 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -518,6 +518,7 @@ struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, v dma_chan_name(chan), err); else break; + chan->private = NULL; chan = NULL; } } @@ -536,6 +537,7 @@ void dma_release_channel(struct dma_chan *chan) WARN_ONCE(chan->client_count != 1, "chan reference count %d != 1\n", chan->client_count); dma_chan_put(chan); + chan->private = NULL; mutex_unlock(&dma_list_mutex); } EXPORT_SYMBOL_GPL(dma_release_channel); diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 6b702cc46b3d..a97c07eef7ec 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -560,7 +560,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned long flags) { struct dw_dma_chan *dwc = to_dw_dma_chan(chan); - struct dw_dma_slave *dws = dwc->dws; + struct dw_dma_slave *dws = chan->private; struct dw_desc *prev; struct dw_desc *first; u32 ctllo; @@ -790,7 +790,7 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan) cfghi = DWC_CFGH_FIFO_MODE; cfglo = 0; - dws = dwc->dws; + dws = chan->private; if (dws) { /* * We need controller-specific data to set up slave @@ -866,7 +866,6 @@ static void dwc_free_chan_resources(struct dma_chan *chan) spin_lock_bh(&dwc->lock); list_splice_init(&dwc->free_list, &list); dwc->descs_allocated = 0; - dwc->dws = NULL; /* Disable interrupts */ channel_clear_bit(dw, MASK.XFER, dwc->mask); diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h index 00fdd187bb0c..b252b202c5cf 100644 --- a/drivers/dma/dw_dmac_regs.h +++ b/drivers/dma/dw_dmac_regs.h @@ -139,8 +139,6 @@ struct dw_dma_chan { struct list_head queue; struct list_head free_list; - struct dw_dma_slave *dws; - unsigned int descs_allocated; }; diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c index 261b9aa3f248..05aa2d406ac6 100644 --- a/drivers/firmware/memmap.c +++ b/drivers/firmware/memmap.c @@ -1,7 +1,7 @@ /* * linux/drivers/firmware/memmap.c * Copyright (C) 2008 SUSE LINUX Products GmbH - * by Bernhard Walle <bwalle@suse.de> + * by Bernhard Walle <bernhard.walle@gmx.de> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License v2.0 as published by diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 4be3acbaaf9a..3a22eb9be378 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -80,18 +80,17 @@ config DRM_I915 XFree86 4.4 and above. If unsure, build this and i830 as modules and the X server will load the correct one. -endchoice - config DRM_I915_KMS bool "Enable modesetting on intel by default" depends on DRM_I915 help - Choose this option if you want kernel modesetting enabled by default, - and you have a new enough userspace to support this. Running old - userspaces with this enabled will cause pain. Note that this causes - the driver to bind to PCI devices, which precludes loading things - like intelfb. + Choose this option if you want kernel modesetting enabled by default, + and you have a new enough userspace to support this. Running old + userspaces with this enabled will cause pain. Note that this causes + the driver to bind to PCI devices, which precludes loading things + like intelfb. +endchoice config DRM_MGA tristate "Matrox g200/g400" diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index bfce0992fefb..94a768871734 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -1741,9 +1741,8 @@ out: * RETURNS: * Zero on success, errno on failure. */ -void drm_fb_release(struct file *filp) +void drm_fb_release(struct drm_file *priv) { - struct drm_file *priv = filp->private_data; struct drm_device *dev = priv->minor->dev; struct drm_framebuffer *fb, *tfb; diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 964c5eb1fada..733028b4d45e 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -512,8 +512,8 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, if (drm_mode_equal(&saved_mode, &crtc->mode)) { if (saved_x != crtc->x || saved_y != crtc->y || depth_changed || bpp_changed) { - crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, - old_fb); + ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, + old_fb); goto done; } } @@ -552,7 +552,9 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, /* Set up the DPLL and any encoders state that needs to adjust or depend * on the DPLL. */ - crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb); + ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb); + if (!ret) + goto done; list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { @@ -752,6 +754,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) if (!drm_crtc_helper_set_mode(set->crtc, set->mode, set->x, set->y, old_fb)) { + DRM_ERROR("failed to set mode on crtc %p\n", + set->crtc); ret = -EINVAL; goto fail_set_mode; } @@ -765,7 +769,10 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) old_fb = set->crtc->fb; if (set->crtc->fb != set->fb) set->crtc->fb = set->fb; - crtc_funcs->mode_set_base(set->crtc, set->x, set->y, old_fb); + ret = crtc_funcs->mode_set_base(set->crtc, + set->x, set->y, old_fb); + if (ret != 0) + goto fail_set_mode; } kfree(save_encoders); @@ -775,8 +782,12 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) fail_set_mode: set->crtc->enabled = save_enabled; count = 0; - list_for_each_entry(connector, &dev->mode_config.connector_list, head) + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (!connector->encoder) + continue; + connector->encoder->crtc = save_crtcs[count++]; + } fail_no_encoder: kfree(save_crtcs); count = 0; diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c index b06a53715853..6c020fe5431c 100644 --- a/drivers/gpu/drm/drm_fops.c +++ b/drivers/gpu/drm/drm_fops.c @@ -457,6 +457,9 @@ int drm_release(struct inode *inode, struct file *filp) if (dev->driver->driver_features & DRIVER_GEM) drm_gem_release(dev, file_priv); + if (dev->driver->driver_features & DRIVER_MODESET) + drm_fb_release(file_priv); + mutex_lock(&dev->ctxlist_mutex); if (!list_empty(&dev->ctxlist)) { struct drm_ctx_list *pos, *n; diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 6915fb82d0b0..88d3368ffddd 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -104,8 +104,8 @@ drm_gem_init(struct drm_device *dev) if (drm_mm_init(&mm->offset_manager, DRM_FILE_PAGE_OFFSET_START, DRM_FILE_PAGE_OFFSET_SIZE)) { - drm_free(mm, sizeof(struct drm_gem_mm), DRM_MEM_MM); drm_ht_remove(&mm->offset_hash); + drm_free(mm, sizeof(struct drm_gem_mm), DRM_MEM_MM); return -ENOMEM; } @@ -295,35 +295,37 @@ drm_gem_flink_ioctl(struct drm_device *dev, void *data, return -EBADF; again: - if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0) - return -ENOMEM; + if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0) { + ret = -ENOMEM; + goto err; + } spin_lock(&dev->object_name_lock); - if (obj->name) { - args->name = obj->name; + if (!obj->name) { + ret = idr_get_new_above(&dev->object_name_idr, obj, 1, + &obj->name); + args->name = (uint64_t) obj->name; spin_unlock(&dev->object_name_lock); - return 0; - } - ret = idr_get_new_above(&dev->object_name_idr, obj, 1, - &obj->name); - spin_unlock(&dev->object_name_lock); - if (ret == -EAGAIN) - goto again; - if (ret != 0) { - mutex_lock(&dev->struct_mutex); - drm_gem_object_unreference(obj); - mutex_unlock(&dev->struct_mutex); - return ret; - } + if (ret == -EAGAIN) + goto again; - /* - * Leave the reference from the lookup around as the - * name table now holds one - */ - args->name = (uint64_t) obj->name; + if (ret != 0) + goto err; - return 0; + /* Allocate a reference for the name table. */ + drm_gem_object_reference(obj); + } else { + args->name = (uint64_t) obj->name; + spin_unlock(&dev->object_name_lock); + ret = 0; + } + +err: + mutex_lock(&dev->struct_mutex); + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return ret; } /** @@ -448,6 +450,7 @@ drm_gem_object_handle_free(struct kref *kref) spin_lock(&dev->object_name_lock); if (obj->name) { idr_remove(&dev->object_name_idr, obj->name); + obj->name = 0; spin_unlock(&dev->object_name_lock); /* * The object name held a reference to this object, drop @@ -460,6 +463,26 @@ drm_gem_object_handle_free(struct kref *kref) } EXPORT_SYMBOL(drm_gem_object_handle_free); +void drm_gem_vm_open(struct vm_area_struct *vma) +{ + struct drm_gem_object *obj = vma->vm_private_data; + + drm_gem_object_reference(obj); +} +EXPORT_SYMBOL(drm_gem_vm_open); + +void drm_gem_vm_close(struct vm_area_struct *vma) +{ + struct drm_gem_object *obj = vma->vm_private_data; + struct drm_device *dev = obj->dev; + + mutex_lock(&dev->struct_mutex); + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); +} +EXPORT_SYMBOL(drm_gem_vm_close); + + /** * drm_gem_mmap - memory map routine for GEM objects * @filp: DRM file pointer @@ -521,6 +544,14 @@ int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma) #endif vma->vm_page_prot = __pgprot(prot); + /* Take a ref for this mapping of the object, so that the fault + * handler can dereference the mmap offset's pointer to the object. + * This reference is cleaned up by the corresponding vm_close + * (which should happen whether the vma was created by this call, or + * by a vm_open due to mremap or partial unmap or whatever). + */ + drm_gem_object_reference(obj); + vma->vm_file = filp; /* Needed for drm_vm_open() */ drm_vm_open_locked(vma); diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 81f1cff56fd5..2d797ffe8137 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -202,7 +202,7 @@ static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init) dev_priv->ring.map.flags = 0; dev_priv->ring.map.mtrr = 0; - drm_core_ioremap(&dev_priv->ring.map, dev); + drm_core_ioremap_wc(&dev_priv->ring.map, dev); if (dev_priv->ring.map.handle == NULL) { i915_dma_cleanup(dev); diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index aac12ee31a46..b293ef0bae71 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -27,6 +27,7 @@ * */ +#include <linux/device.h> #include "drmP.h" #include "drm.h" #include "i915_drm.h" @@ -66,6 +67,14 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) i915_save_state(dev); + /* If KMS is active, we do the leavevt stuff here */ + if (drm_core_check_feature(dev, DRIVER_MODESET)) { + if (i915_gem_idle(dev)) + dev_err(&dev->pdev->dev, + "GEM idle failed, resume may fail\n"); + drm_irq_uninstall(dev); + } + intel_opregion_free(dev); if (state.event == PM_EVENT_SUSPEND) { @@ -79,6 +88,9 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) static int i915_resume(struct drm_device *dev) { + struct drm_i915_private *dev_priv = dev->dev_private; + int ret = 0; + pci_set_power_state(dev->pdev, PCI_D0); pci_restore_state(dev->pdev); if (pci_enable_device(dev->pdev)) @@ -89,11 +101,26 @@ static int i915_resume(struct drm_device *dev) intel_opregion_init(dev); - return 0; + /* KMS EnterVT equivalent */ + if (drm_core_check_feature(dev, DRIVER_MODESET)) { + mutex_lock(&dev->struct_mutex); + dev_priv->mm.suspended = 0; + + ret = i915_gem_init_ringbuffer(dev); + if (ret != 0) + ret = -1; + mutex_unlock(&dev->struct_mutex); + + drm_irq_install(dev); + } + + return ret; } static struct vm_operations_struct i915_gem_vm_ops = { .fault = i915_gem_fault, + .open = drm_gem_vm_open, + .close = drm_gem_vm_close, }; static struct drm_driver driver = { diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 7325363164f8..17fa40858d26 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -184,6 +184,8 @@ typedef struct drm_i915_private { unsigned int lvds_dither:1; unsigned int lvds_vbt:1; unsigned int int_crt_support:1; + unsigned int lvds_use_ssc:1; + int lvds_ssc_freq; struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */ int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */ @@ -616,6 +618,7 @@ int i915_gem_init_ringbuffer(struct drm_device *dev); void i915_gem_cleanup_ringbuffer(struct drm_device *dev); int i915_gem_do_init(struct drm_device *dev, unsigned long start, unsigned long end); +int i915_gem_idle(struct drm_device *dev); int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf); int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 818576654092..28b726d07a0c 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -34,10 +34,6 @@ #define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) -static void -i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, - uint32_t read_domains, - uint32_t write_domain); static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj); static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj); static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj); @@ -607,8 +603,6 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) case -EAGAIN: return VM_FAULT_OOM; case -EFAULT: - case -EBUSY: - DRM_ERROR("can't insert pfn?? fault or busy...\n"); return VM_FAULT_SIGBUS; default: return VM_FAULT_NOPAGE; @@ -684,6 +678,30 @@ out_free_list: return ret; } +static void +i915_gem_free_mmap_offset(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + struct drm_gem_mm *mm = dev->mm_private; + struct drm_map_list *list; + + list = &obj->map_list; + drm_ht_remove_item(&mm->offset_hash, &list->hash); + + if (list->file_offset_node) { + drm_mm_put_block(list->file_offset_node); + list->file_offset_node = NULL; + } + + if (list->map) { + drm_free(list->map, sizeof(struct drm_map), DRM_MEM_DRIVER); + list->map = NULL; + } + + obj_priv->mmap_offset = 0; +} + /** * i915_gem_get_gtt_alignment - return required GTT alignment for an object * @obj: object to check @@ -758,8 +776,11 @@ i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data, if (!obj_priv->mmap_offset) { ret = i915_gem_create_mmap_offset(obj); - if (ret) + if (ret) { + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); return ret; + } } args->offset = obj_priv->mmap_offset; @@ -1030,6 +1051,9 @@ i915_gem_retire_requests(struct drm_device *dev) drm_i915_private_t *dev_priv = dev->dev_private; uint32_t seqno; + if (!dev_priv->hw_status_page) + return; + seqno = i915_get_gem_seqno(dev); while (!list_empty(&dev_priv->mm.request_list)) { @@ -1996,30 +2020,28 @@ i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write) * drm_agp_chipset_flush */ static void -i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, - uint32_t read_domains, - uint32_t write_domain) +i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; uint32_t invalidate_domains = 0; uint32_t flush_domains = 0; - BUG_ON(read_domains & I915_GEM_DOMAIN_CPU); - BUG_ON(write_domain == I915_GEM_DOMAIN_CPU); + BUG_ON(obj->pending_read_domains & I915_GEM_DOMAIN_CPU); + BUG_ON(obj->pending_write_domain == I915_GEM_DOMAIN_CPU); #if WATCH_BUF DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n", __func__, obj, - obj->read_domains, read_domains, - obj->write_domain, write_domain); + obj->read_domains, obj->pending_read_domains, + obj->write_domain, obj->pending_write_domain); #endif /* * If the object isn't moving to a new write domain, * let the object stay in multiple read domains */ - if (write_domain == 0) - read_domains |= obj->read_domains; + if (obj->pending_write_domain == 0) + obj->pending_read_domains |= obj->read_domains; else obj_priv->dirty = 1; @@ -2029,15 +2051,17 @@ i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, * any read domains which differ from the old * write domain */ - if (obj->write_domain && obj->write_domain != read_domains) { + if (obj->write_domain && + obj->write_domain != obj->pending_read_domains) { flush_domains |= obj->write_domain; - invalidate_domains |= read_domains & ~obj->write_domain; + invalidate_domains |= + obj->pending_read_domains & ~obj->write_domain; } /* * Invalidate any read caches which may have * stale data. That is, any new read domains. */ - invalidate_domains |= read_domains & ~obj->read_domains; + invalidate_domains |= obj->pending_read_domains & ~obj->read_domains; if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_CPU) { #if WATCH_BUF DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n", @@ -2046,9 +2070,15 @@ i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, i915_gem_clflush_object(obj); } - if ((write_domain | flush_domains) != 0) - obj->write_domain = write_domain; - obj->read_domains = read_domains; + /* The actual obj->write_domain will be updated with + * pending_write_domain after we emit the accumulated flush for all + * of our domain changes in execbuffers (which clears objects' + * write_domains). So if we have a current write domain that we + * aren't changing, set pending_write_domain to that. + */ + if (flush_domains == 0 && obj->pending_write_domain == 0) + obj->pending_write_domain = obj->write_domain; + obj->read_domains = obj->pending_read_domains; dev->invalidate_domains |= invalidate_domains; dev->flush_domains |= flush_domains; @@ -2251,6 +2281,8 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, (int) reloc.offset, reloc.read_domains, reloc.write_domain); + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); return -EINVAL; } @@ -2480,13 +2512,15 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, if (dev_priv->mm.wedged) { DRM_ERROR("Execbuf while wedged\n"); mutex_unlock(&dev->struct_mutex); - return -EIO; + ret = -EIO; + goto pre_mutex_err; } if (dev_priv->mm.suspended) { DRM_ERROR("Execbuf while VT-switched.\n"); mutex_unlock(&dev->struct_mutex); - return -EBUSY; + ret = -EBUSY; + goto pre_mutex_err; } /* Look up object handles */ @@ -2554,9 +2588,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, struct drm_gem_object *obj = object_list[i]; /* Compute new gpu domains and update invalidate/flush */ - i915_gem_object_set_to_gpu_domain(obj, - obj->pending_read_domains, - obj->pending_write_domain); + i915_gem_object_set_to_gpu_domain(obj); } i915_verify_inactive(dev, __FILE__, __LINE__); @@ -2575,6 +2607,12 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, (void)i915_add_request(dev, dev->flush_domains); } + for (i = 0; i < args->buffer_count; i++) { + struct drm_gem_object *obj = object_list[i]; + + obj->write_domain = obj->pending_write_domain; + } + i915_verify_inactive(dev, __FILE__, __LINE__); #if WATCH_COHERENCY @@ -2632,15 +2670,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, i915_verify_inactive(dev, __FILE__, __LINE__); - /* Copy the new buffer offsets back to the user's exec list. */ - ret = copy_to_user((struct drm_i915_relocation_entry __user *) - (uintptr_t) args->buffers_ptr, - exec_list, - sizeof(*exec_list) * args->buffer_count); - if (ret) - DRM_ERROR("failed to copy %d exec entries " - "back to user (%d)\n", - args->buffer_count, ret); err: for (i = 0; i < pinned; i++) i915_gem_object_unpin(object_list[i]); @@ -2650,6 +2679,18 @@ err: mutex_unlock(&dev->struct_mutex); + if (!ret) { + /* Copy the new buffer offsets back to the user's exec list. */ + ret = copy_to_user((struct drm_i915_relocation_entry __user *) + (uintptr_t) args->buffers_ptr, + exec_list, + sizeof(*exec_list) * args->buffer_count); + if (ret) + DRM_ERROR("failed to copy %d exec entries " + "back to user (%d)\n", + args->buffer_count, ret); + } + pre_mutex_err: drm_free(object_list, sizeof(*object_list) * args->buffer_count, DRM_MEM_DRIVER); @@ -2753,6 +2794,7 @@ i915_gem_pin_ioctl(struct drm_device *dev, void *data, if (obj_priv->pin_filp != NULL && obj_priv->pin_filp != file_priv) { DRM_ERROR("Already pinned in i915_gem_pin_ioctl(): %d\n", args->handle); + drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return -EINVAL; } @@ -2833,6 +2875,13 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data, return -EBADF; } + /* Update the active list for the hardware's current position. + * Otherwise this only updates on a delayed timer or when irqs are + * actually unmasked, and our working set ends up being larger than + * required. + */ + i915_gem_retire_requests(dev); + obj_priv = obj->driver_private; /* Don't count being on the flushing list against the object being * done. Otherwise, a buffer left on the flushing list but not getting @@ -2885,9 +2934,6 @@ int i915_gem_init_object(struct drm_gem_object *obj) void i915_gem_free_object(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; - struct drm_gem_mm *mm = dev->mm_private; - struct drm_map_list *list; - struct drm_map *map; struct drm_i915_gem_object *obj_priv = obj->driver_private; while (obj_priv->pin_count > 0) @@ -2898,19 +2944,7 @@ void i915_gem_free_object(struct drm_gem_object *obj) i915_gem_object_unbind(obj); - list = &obj->map_list; - drm_ht_remove_item(&mm->offset_hash, &list->hash); - - if (list->file_offset_node) { - drm_mm_put_block(list->file_offset_node); - list->file_offset_node = NULL; - } - - map = list->map; - if (map) { - drm_free(map, sizeof(*map), DRM_MEM_DRIVER); - list->map = NULL; - } + i915_gem_free_mmap_offset(obj); drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER); drm_free(obj->driver_private, 1, DRM_MEM_DRIVER); @@ -2949,7 +2983,7 @@ i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head) return 0; } -static int +int i915_gem_idle(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; @@ -3095,6 +3129,7 @@ i915_gem_init_hws(struct drm_device *dev) if (dev_priv->hw_status_page == NULL) { DRM_ERROR("Failed to map status page.\n"); memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map)); + i915_gem_object_unpin(obj); drm_gem_object_unreference(obj); return -EINVAL; } @@ -3107,6 +3142,31 @@ i915_gem_init_hws(struct drm_device *dev) return 0; } +static void +i915_gem_cleanup_hws(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + + if (dev_priv->hws_obj == NULL) + return; + + obj = dev_priv->hws_obj; + obj_priv = obj->driver_private; + + kunmap(obj_priv->page_list[0]); + i915_gem_object_unpin(obj); + drm_gem_object_unreference(obj); + dev_priv->hws_obj = NULL; + + memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map)); + dev_priv->hw_status_page = NULL; + + /* Write high address into HWS_PGA when disabling. */ + I915_WRITE(HWS_PGA, 0x1ffff000); +} + int i915_gem_init_ringbuffer(struct drm_device *dev) { @@ -3124,6 +3184,7 @@ i915_gem_init_ringbuffer(struct drm_device *dev) obj = drm_gem_object_alloc(dev, 128 * 1024); if (obj == NULL) { DRM_ERROR("Failed to allocate ringbuffer\n"); + i915_gem_cleanup_hws(dev); return -ENOMEM; } obj_priv = obj->driver_private; @@ -3131,6 +3192,7 @@ i915_gem_init_ringbuffer(struct drm_device *dev) ret = i915_gem_object_pin(obj, 4096); if (ret != 0) { drm_gem_object_unreference(obj); + i915_gem_cleanup_hws(dev); return ret; } @@ -3148,7 +3210,9 @@ i915_gem_init_ringbuffer(struct drm_device *dev) if (ring->map.handle == NULL) { DRM_ERROR("Failed to map ringbuffer.\n"); memset(&dev_priv->ring, 0, sizeof(dev_priv->ring)); + i915_gem_object_unpin(obj); drm_gem_object_unreference(obj); + i915_gem_cleanup_hws(dev); return -EINVAL; } ring->ring_obj = obj; @@ -3228,20 +3292,7 @@ i915_gem_cleanup_ringbuffer(struct drm_device *dev) dev_priv->ring.ring_obj = NULL; memset(&dev_priv->ring, 0, sizeof(dev_priv->ring)); - if (dev_priv->hws_obj != NULL) { - struct drm_gem_object *obj = dev_priv->hws_obj; - struct drm_i915_gem_object *obj_priv = obj->driver_private; - - kunmap(obj_priv->page_list[0]); - i915_gem_object_unpin(obj); - drm_gem_object_unreference(obj); - dev_priv->hws_obj = NULL; - memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map)); - dev_priv->hw_status_page = NULL; - - /* Write high address into HWS_PGA when disabling. */ - I915_WRITE(HWS_PGA, 0x1ffff000); - } + i915_gem_cleanup_hws(dev); } int diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index fa1685cba840..7fb4191ef934 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -299,9 +299,8 @@ i915_gem_set_tiling(struct drm_device *dev, void *data, } obj_priv->stride = args->stride; - mutex_unlock(&dev->struct_mutex); - drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); return 0; } @@ -340,9 +339,8 @@ i915_gem_get_tiling(struct drm_device *dev, void *data, DRM_ERROR("unknown tiling mode\n"); } - mutex_unlock(&dev->struct_mutex); - drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); return 0; } diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 4ca82a025525..65be30dccc77 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -135,6 +135,14 @@ parse_general_features(struct drm_i915_private *dev_priv, if (general) { dev_priv->int_tv_support = general->int_tv_support; dev_priv->int_crt_support = general->int_crt_support; + dev_priv->lvds_use_ssc = general->enable_ssc; + + if (dev_priv->lvds_use_ssc) { + if (IS_I855(dev_priv->dev)) + dev_priv->lvds_ssc_freq = general->ssc_freq ? 66 : 48; + else + dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96; + } } } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bbdd72909a11..65b635ce28c8 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -90,12 +90,12 @@ typedef struct { #define I9XX_DOT_MAX 400000 #define I9XX_VCO_MIN 1400000 #define I9XX_VCO_MAX 2800000 -#define I9XX_N_MIN 3 -#define I9XX_N_MAX 8 +#define I9XX_N_MIN 1 +#define I9XX_N_MAX 6 #define I9XX_M_MIN 70 #define I9XX_M_MAX 120 #define I9XX_M1_MIN 10 -#define I9XX_M1_MAX 20 +#define I9XX_M1_MAX 22 #define I9XX_M2_MIN 5 #define I9XX_M2_MAX 9 #define I9XX_P_SDVO_DAC_MIN 5 @@ -189,9 +189,7 @@ static const intel_limit_t *intel_limit(struct drm_crtc *crtc) return limit; } -/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ - -static void i8xx_clock(int refclk, intel_clock_t *clock) +static void intel_clock(int refclk, intel_clock_t *clock) { clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); clock->p = clock->p1 * clock->p2; @@ -199,25 +197,6 @@ static void i8xx_clock(int refclk, intel_clock_t *clock) clock->dot = clock->vco / clock->p; } -/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */ - -static void i9xx_clock(int refclk, intel_clock_t *clock) -{ - clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); - clock->p = clock->p1 * clock->p2; - clock->vco = refclk * clock->m / (clock->n + 2); - clock->dot = clock->vco / clock->p; -} - -static void intel_clock(struct drm_device *dev, int refclk, - intel_clock_t *clock) -{ - if (IS_I9XX(dev)) - i9xx_clock (refclk, clock); - else - i8xx_clock (refclk, clock); -} - /** * Returns whether any output on the specified pipe is of the specified type */ @@ -238,7 +217,7 @@ bool intel_pipe_has_type (struct drm_crtc *crtc, int type) return false; } -#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; } +#define INTELPllInvalid(s) do { DRM_DEBUG(s); return false; } while (0) /** * Returns whether the given set of divisors are valid for a given refclk with * the given connectors. @@ -318,7 +297,7 @@ static bool intel_find_best_PLL(struct drm_crtc *crtc, int target, clock.p1 <= limit->p1.max; clock.p1++) { int this_err; - intel_clock(dev, refclk, &clock); + intel_clock(refclk, &clock); if (!intel_PLL_is_valid(crtc, &clock)) continue; @@ -343,7 +322,7 @@ intel_wait_for_vblank(struct drm_device *dev) udelay(20000); } -static void +static int intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { @@ -361,11 +340,21 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE; int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; u32 dspcntr, alignment; + int ret; /* no fb bound */ if (!crtc->fb) { DRM_DEBUG("No FB bound\n"); - return; + return 0; + } + + switch (pipe) { + case 0: + case 1: + break; + default: + DRM_ERROR("Can't update pipe %d in SAREA\n", pipe); + return -EINVAL; } intel_fb = to_intel_framebuffer(crtc->fb); @@ -377,28 +366,30 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, alignment = 64 * 1024; break; case I915_TILING_X: - if (IS_I9XX(dev)) - alignment = 1024 * 1024; - else - alignment = 512 * 1024; + /* pin() will align the object as required by fence */ + alignment = 0; break; case I915_TILING_Y: /* FIXME: Is this true? */ DRM_ERROR("Y tiled not allowed for scan out buffers\n"); - return; + return -EINVAL; default: BUG(); } - if (i915_gem_object_pin(intel_fb->obj, alignment)) - return; - - i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1); - - Start = obj_priv->gtt_offset; - Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8); + mutex_lock(&dev->struct_mutex); + ret = i915_gem_object_pin(intel_fb->obj, alignment); + if (ret != 0) { + mutex_unlock(&dev->struct_mutex); + return ret; + } - I915_WRITE(dspstride, crtc->fb->pitch); + ret = i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1); + if (ret != 0) { + i915_gem_object_unpin(intel_fb->obj); + mutex_unlock(&dev->struct_mutex); + return ret; + } dspcntr = I915_READ(dspcntr_reg); /* Mask out pixel format bits in case we change it */ @@ -419,11 +410,17 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, break; default: DRM_ERROR("Unknown color depth\n"); - return; + i915_gem_object_unpin(intel_fb->obj); + mutex_unlock(&dev->struct_mutex); + return -EINVAL; } I915_WRITE(dspcntr_reg, dspcntr); + Start = obj_priv->gtt_offset; + Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8); + DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y); + I915_WRITE(dspstride, crtc->fb->pitch); if (IS_I965G(dev)) { I915_WRITE(dspbase, Offset); I915_READ(dspbase); @@ -440,27 +437,24 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, intel_fb = to_intel_framebuffer(old_fb); i915_gem_object_unpin(intel_fb->obj); } + mutex_unlock(&dev->struct_mutex); if (!dev->primary->master) - return; + return 0; master_priv = dev->primary->master->driver_priv; if (!master_priv->sarea_priv) - return; + return 0; - switch (pipe) { - case 0: - master_priv->sarea_priv->pipeA_x = x; - master_priv->sarea_priv->pipeA_y = y; - break; - case 1: + if (pipe) { master_priv->sarea_priv->pipeB_x = x; master_priv->sarea_priv->pipeB_y = y; - break; - default: - DRM_ERROR("Can't update pipe %d in SAREA\n", pipe); - break; + } else { + master_priv->sarea_priv->pipeA_x = x; + master_priv->sarea_priv->pipeA_y = y; } + + return 0; } @@ -708,11 +702,11 @@ static int intel_panel_fitter_pipe (struct drm_device *dev) return 1; } -static void intel_crtc_mode_set(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode, - int x, int y, - struct drm_framebuffer *old_fb) +static int intel_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -732,13 +726,14 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE; int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS; int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; - int refclk; + int refclk, num_outputs = 0; intel_clock_t clock; u32 dpll = 0, fp = 0, dspcntr, pipeconf; bool ok, is_sdvo = false, is_dvo = false; bool is_crt = false, is_lvds = false, is_tv = false; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_connector *connector; + int ret; drm_vblank_pre_modeset(dev, pipe); @@ -768,9 +763,14 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, is_crt = true; break; } + + num_outputs++; } - if (IS_I9XX(dev)) { + if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2) { + refclk = dev_priv->lvds_ssc_freq * 1000; + DRM_DEBUG("using SSC reference clock of %d MHz\n", refclk / 1000); + } else if (IS_I9XX(dev)) { refclk = 96000; } else { refclk = 48000; @@ -779,7 +779,7 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock); if (!ok) { DRM_ERROR("Couldn't find PLL settings for mode!\n"); - return; + return -EINVAL; } fp = clock.n << 16 | clock.m1 << 8 | clock.m2; @@ -829,11 +829,14 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, } } - if (is_tv) { + if (is_sdvo && is_tv) + dpll |= PLL_REF_INPUT_TVCLKINBC; + else if (is_tv) /* XXX: just matching BIOS for now */ -/* dpll |= PLL_REF_INPUT_TVCLKINBC; */ + /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ dpll |= 3; - } + else if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2) + dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; else dpll |= PLL_REF_INPUT_DREFCLK; @@ -950,9 +953,13 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(dspcntr_reg, dspcntr); /* Flush the plane changes */ - intel_pipe_set_base(crtc, x, y, old_fb); + ret = intel_pipe_set_base(crtc, x, y, old_fb); + if (ret != 0) + return ret; drm_vblank_post_modeset(dev, pipe); + + return 0; } /** Loads the palette/gamma unit for the CRTC with the prepared values */ @@ -1001,6 +1008,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, temp = CURSOR_MODE_DISABLE; addr = 0; bo = NULL; + mutex_lock(&dev->struct_mutex); goto finish; } @@ -1023,18 +1031,19 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, } /* we only need to pin inside GTT if cursor is non-phy */ + mutex_lock(&dev->struct_mutex); if (!dev_priv->cursor_needs_physical) { ret = i915_gem_object_pin(bo, PAGE_SIZE); if (ret) { DRM_ERROR("failed to pin cursor bo\n"); - goto fail; + goto fail_locked; } addr = obj_priv->gtt_offset; } else { ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1); if (ret) { DRM_ERROR("failed to attach phys object\n"); - goto fail; + goto fail_locked; } addr = obj_priv->phys_obj->handle->busaddr; } @@ -1054,10 +1063,9 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo); } else i915_gem_object_unpin(intel_crtc->cursor_bo); - mutex_lock(&dev->struct_mutex); drm_gem_object_unreference(intel_crtc->cursor_bo); - mutex_unlock(&dev->struct_mutex); } + mutex_unlock(&dev->struct_mutex); intel_crtc->cursor_addr = addr; intel_crtc->cursor_bo = bo; @@ -1065,6 +1073,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, return 0; fail: mutex_lock(&dev->struct_mutex); +fail_locked: drm_gem_object_unreference(bo); mutex_unlock(&dev->struct_mutex); return ret; @@ -1292,7 +1301,7 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) } /* XXX: Handle the 100Mhz refclk */ - i9xx_clock(96000, &clock); + intel_clock(96000, &clock); } else { bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN); @@ -1304,9 +1313,9 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN) { /* XXX: might not be 66MHz */ - i8xx_clock(66000, &clock); + intel_clock(66000, &clock); } else - i8xx_clock(48000, &clock); + intel_clock(48000, &clock); } else { if (dpll & PLL_P1_DIVIDE_BY_TWO) clock.p1 = 2; @@ -1319,7 +1328,7 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) else clock.p2 = 2; - i8xx_clock(48000, &clock); + intel_clock(48000, &clock); } } @@ -1598,7 +1607,9 @@ intel_user_framebuffer_create(struct drm_device *dev, ret = intel_framebuffer_create(dev, mode_cmd, &fb, obj); if (ret) { + mutex_lock(&dev->struct_mutex); drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); return NULL; } diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index afd1217b8a02..b7f0ebe9f810 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -473,7 +473,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, ret = intel_framebuffer_create(dev, &mode_cmd, &fb, fbo); if (ret) { DRM_ERROR("failed to allocate fb.\n"); - goto out_unref; + goto out_unpin; } list_add(&fb->filp_head, &dev->mode_config.fb_kernel_list); @@ -484,7 +484,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, info = framebuffer_alloc(sizeof(struct intelfb_par), device); if (!info) { ret = -ENOMEM; - goto out_unref; + goto out_unpin; } par = info->par; @@ -513,7 +513,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, size); if (!info->screen_base) { ret = -ENOSPC; - goto out_unref; + goto out_unpin; } info->screen_size = size; @@ -608,6 +608,8 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, mutex_unlock(&dev->struct_mutex); return 0; +out_unpin: + i915_gem_object_unpin(fbo); out_unref: drm_gem_object_unreference(fbo); mutex_unlock(&dev->struct_mutex); diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 6d4f91265354..0d211af98854 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -481,8 +481,6 @@ void intel_lvds_init(struct drm_device *dev) if (dev_priv->panel_fixed_mode) { dev_priv->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; - drm_mode_probed_add(connector, - dev_priv->panel_fixed_mode); goto out; } } diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index a30508b639ba..fbe6f3931b1b 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -193,7 +193,7 @@ static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr, #define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd} /** Mapping of command numbers to names, for debug output */ -const static struct _sdvo_cmd_name { +static const struct _sdvo_cmd_name { u8 cmd; char *name; } sdvo_cmd_names[] = { diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index fbb35dc56f5c..56485d67369b 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -411,7 +411,7 @@ struct tv_mode { * These values account for -1s required. */ -const static struct tv_mode tv_modes[] = { +static const struct tv_mode tv_modes[] = { { .name = "NTSC-M", .clock = 107520, diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index df4cf97e5d97..92965dbb3c14 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -557,8 +557,10 @@ static int radeon_do_engine_reset(struct drm_device * dev) } static void radeon_cp_init_ring_buffer(struct drm_device * dev, - drm_radeon_private_t * dev_priv) + drm_radeon_private_t *dev_priv, + struct drm_file *file_priv) { + struct drm_radeon_master_private *master_priv; u32 ring_start, cur_read_ptr; u32 tmp; @@ -677,6 +679,14 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev, dev_priv->scratch[2] = 0; RADEON_WRITE(RADEON_LAST_CLEAR_REG, 0); + /* reset sarea copies of these */ + master_priv = file_priv->master->driver_priv; + if (master_priv->sarea_priv) { + master_priv->sarea_priv->last_frame = 0; + master_priv->sarea_priv->last_dispatch = 0; + master_priv->sarea_priv->last_clear = 0; + } + radeon_do_wait_for_idle(dev_priv); /* Sync everything up */ @@ -1215,7 +1225,7 @@ static int radeon_do_init_cp(struct drm_device *dev, drm_radeon_init_t *init, } radeon_cp_load_microcode(dev_priv); - radeon_cp_init_ring_buffer(dev, dev_priv); + radeon_cp_init_ring_buffer(dev, dev_priv, file_priv); dev_priv->last_buf = 0; @@ -1281,7 +1291,7 @@ static int radeon_do_cleanup_cp(struct drm_device * dev) * * Charl P. Botha <http://cpbotha.net> */ -static int radeon_do_resume_cp(struct drm_device * dev) +static int radeon_do_resume_cp(struct drm_device *dev, struct drm_file *file_priv) { drm_radeon_private_t *dev_priv = dev->dev_private; @@ -1304,7 +1314,7 @@ static int radeon_do_resume_cp(struct drm_device * dev) } radeon_cp_load_microcode(dev_priv); - radeon_cp_init_ring_buffer(dev, dev_priv); + radeon_cp_init_ring_buffer(dev, dev_priv, file_priv); radeon_do_engine_reset(dev); radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1); @@ -1479,8 +1489,7 @@ int radeon_cp_idle(struct drm_device *dev, void *data, struct drm_file *file_pri */ int radeon_cp_resume(struct drm_device *dev, void *data, struct drm_file *file_priv) { - - return radeon_do_resume_cp(dev); + return radeon_do_resume_cp(dev, file_priv); } int radeon_engine_reset(struct drm_device *dev, void *data, struct drm_file *file_priv) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 6cad69ed21c5..1cc967448f4d 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1300,7 +1300,13 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) }, + { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) }, + { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) }, + { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) }, + { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) }, @@ -1605,6 +1611,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0002) }, { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) }, + { HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) }, @@ -1612,10 +1619,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) }, { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) }, { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) }, - { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) }, - { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) }, - { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) }, - { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) }, { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) }, { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) }, @@ -1626,8 +1629,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT) }, { HID_USB_DEVICE(USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K) }, - { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) }, - { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) }, { } }; diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index e899f510ebeb..88511970508d 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -348,6 +348,9 @@ #define USB_VENDOR_ID_PLAYDOTCOM 0x0b43 #define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII 0x0003 +#define USB_VENDOR_ID_POWERCOM 0x0d9f +#define USB_DEVICE_ID_POWERCOM_UPS 0x0002 + #define USB_VENDOR_ID_SAITEK 0x06a3 #define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17 diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 732449628971..02b19db5442e 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -267,8 +267,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, default: { struct hid_device *hid = dev->hid; - if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ) - return -EINVAL; + if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ) { + ret = -EINVAL; + break; + } if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) { int len; @@ -277,8 +279,9 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, len = strlen(hid->name) + 1; if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd); - return copy_to_user(user_arg, hid->name, len) ? + ret = copy_to_user(user_arg, hid->name, len) ? -EFAULT : len; + break; } if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) { @@ -288,12 +291,13 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, len = strlen(hid->phys) + 1; if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd); - return copy_to_user(user_arg, hid->phys, len) ? + ret = copy_to_user(user_arg, hid->phys, len) ? -EFAULT : len; + break; } } - ret = -ENOTTY; + ret = -ENOTTY; } unlock_kernel(); return ret; diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 609cafff86bc..5f81ddf71508 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -1872,7 +1872,7 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address, devid = superio_inw(sioaddr, SIO_REG_MANID); if (devid != SIO_FINTEK_ID) { - printk(KERN_INFO DRVNAME ": Not a Fintek device\n"); + pr_debug(DRVNAME ": Not a Fintek device\n"); goto exit; } @@ -1932,7 +1932,7 @@ static int __init f71882fg_device_add(unsigned short address, res.name = f71882fg_pdev->name; err = acpi_check_resource_conflict(&res); if (err) - return err; + goto exit_device_put; err = platform_device_add_resources(f71882fg_pdev, &res, 1); if (err) { diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c index abf4dfc8ec22..29c83b5b9697 100644 --- a/drivers/hwmon/hp_accel.c +++ b/drivers/hwmon/hp_accel.c @@ -166,6 +166,18 @@ static struct axis_conversion lis3lv02d_axis_xy_swap_yz_inverted = {2, -1, -3}; }, \ .driver_data = &lis3lv02d_axis_##_axis \ } + +#define AXIS_DMI_MATCH2(_ident, _class1, _name1, \ + _class2, _name2, \ + _axis) { \ + .ident = _ident, \ + .callback = lis3lv02d_dmi_matched, \ + .matches = { \ + DMI_MATCH(DMI_##_class1, _name1), \ + DMI_MATCH(DMI_##_class2, _name2), \ + }, \ + .driver_data = &lis3lv02d_axis_##_axis \ +} static struct dmi_system_id lis3lv02d_dmi_ids[] = { /* product names are truncated to match all kinds of a same model */ AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted), @@ -179,6 +191,16 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = { AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd), AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right), AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted), + /* Intel-based HP Pavilion dv5 */ + AXIS_DMI_MATCH2("HPDV5_I", + PRODUCT_NAME, "HP Pavilion dv5", + BOARD_NAME, "3603", + x_inverted), + /* AMD-based HP Pavilion dv5 */ + AXIS_DMI_MATCH2("HPDV5_A", + PRODUCT_NAME, "HP Pavilion dv5", + BOARD_NAME, "3600", + y_inverted), { NULL, } /* Laptop models without axis info (yet): * "NC6910" "HP Compaq 6910" @@ -213,9 +235,49 @@ static struct delayed_led_classdev hpled_led = { .set_brightness = hpled_set, }; +static acpi_status +lis3lv02d_get_resource(struct acpi_resource *resource, void *context) +{ + if (resource->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) { + struct acpi_resource_extended_irq *irq; + u32 *device_irq = context; + + irq = &resource->data.extended_irq; + *device_irq = irq->interrupts[0]; + } + + return AE_OK; +} + +static void lis3lv02d_enum_resources(struct acpi_device *device) +{ + acpi_status status; + + status = acpi_walk_resources(device->handle, METHOD_NAME__CRS, + lis3lv02d_get_resource, &adev.irq); + if (ACPI_FAILURE(status)) + printk(KERN_DEBUG DRIVER_NAME ": Error getting resources\n"); +} + +static s16 lis3lv02d_read_16(acpi_handle handle, int reg) +{ + u8 lo, hi; + + adev.read(handle, reg - 1, &lo); + adev.read(handle, reg, &hi); + /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */ + return (s16)((hi << 8) | lo); +} + +static s16 lis3lv02d_read_8(acpi_handle handle, int reg) +{ + s8 lo; + adev.read(handle, reg, &lo); + return lo; +} + static int lis3lv02d_add(struct acpi_device *device) { - u8 val; int ret; if (!device) @@ -229,10 +291,22 @@ static int lis3lv02d_add(struct acpi_device *device) strcpy(acpi_device_class(device), ACPI_MDPS_CLASS); device->driver_data = &adev; - lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val); - if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) { + lis3lv02d_acpi_read(device->handle, WHO_AM_I, &adev.whoami); + switch (adev.whoami) { + case LIS_DOUBLE_ID: + printk(KERN_INFO DRIVER_NAME ": 2-byte sensor found\n"); + adev.read_data = lis3lv02d_read_16; + adev.mdps_max_val = 2048; + break; + case LIS_SINGLE_ID: + printk(KERN_INFO DRIVER_NAME ": 1-byte sensor found\n"); + adev.read_data = lis3lv02d_read_8; + adev.mdps_max_val = 128; + break; + default: printk(KERN_ERR DRIVER_NAME - ": Accelerometer chip not LIS3LV02D{L,Q}\n"); + ": unknown sensor type 0x%X\n", adev.whoami); + return -EINVAL; } /* If possible use a "standard" axes order */ @@ -247,6 +321,9 @@ static int lis3lv02d_add(struct acpi_device *device) if (ret) return ret; + /* obtain IRQ number of our device from ACPI */ + lis3lv02d_enum_resources(adev.device); + ret = lis3lv02d_init_device(&adev); if (ret) { flush_work(&hpled_led.work); diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c index 219d2d0d5a62..8bb2158f0453 100644 --- a/drivers/hwmon/lis3lv02d.c +++ b/drivers/hwmon/lis3lv02d.c @@ -3,7 +3,7 @@ * * Copyright (C) 2007-2008 Yan Burman * Copyright (C) 2008 Eric Piel - * Copyright (C) 2008 Pavel Machek + * Copyright (C) 2008-2009 Pavel Machek * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -35,6 +35,7 @@ #include <linux/poll.h> #include <linux/freezer.h> #include <linux/uaccess.h> +#include <linux/miscdevice.h> #include <acpi/acpi_drivers.h> #include <asm/atomic.h> #include "lis3lv02d.h" @@ -52,24 +53,14 @@ * joystick. */ -/* Maximum value our axis may get for the input device (signed 12 bits) */ -#define MDPS_MAX_VAL 2048 +struct acpi_lis3lv02d adev = { + .misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(adev.misc_wait), +}; -struct acpi_lis3lv02d adev; EXPORT_SYMBOL_GPL(adev); static int lis3lv02d_add_fs(struct acpi_device *device); -static s16 lis3lv02d_read_16(acpi_handle handle, int reg) -{ - u8 lo, hi; - - adev.read(handle, reg, &lo); - adev.read(handle, reg + 1, &hi); - /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */ - return (s16)((hi << 8) | lo); -} - /** * lis3lv02d_get_axis - For the given axis, give the value converted * @axis: 1,2,3 - can also be negative @@ -98,9 +89,9 @@ static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z) { int position[3]; - position[0] = lis3lv02d_read_16(handle, OUTX_L); - position[1] = lis3lv02d_read_16(handle, OUTY_L); - position[2] = lis3lv02d_read_16(handle, OUTZ_L); + position[0] = adev.read_data(handle, OUTX); + position[1] = adev.read_data(handle, OUTY); + position[2] = adev.read_data(handle, OUTZ); *x = lis3lv02d_get_axis(adev.ac.x, position); *y = lis3lv02d_get_axis(adev.ac.y, position); @@ -110,26 +101,13 @@ static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z) void lis3lv02d_poweroff(acpi_handle handle) { adev.is_on = 0; - /* disable X,Y,Z axis and power down */ - adev.write(handle, CTRL_REG1, 0x00); } EXPORT_SYMBOL_GPL(lis3lv02d_poweroff); void lis3lv02d_poweron(acpi_handle handle) { - u8 val; - adev.is_on = 1; adev.init(handle); - adev.write(handle, FF_WU_CFG, 0); - /* - * BDU: LSB and MSB values are not updated until both have been read. - * So the value read will always be correct. - * IEN: Interrupt for free-fall and DD, not for data-ready. - */ - adev.read(handle, CTRL_REG2, &val); - val |= CTRL2_BDU | CTRL2_IEN; - adev.write(handle, CTRL_REG2, val); } EXPORT_SYMBOL_GPL(lis3lv02d_poweron); @@ -162,6 +140,140 @@ static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev) mutex_unlock(&dev->lock); } +static irqreturn_t lis302dl_interrupt(int irq, void *dummy) +{ + /* + * Be careful: on some HP laptops the bios force DD when on battery and + * the lid is closed. This leads to interrupts as soon as a little move + * is done. + */ + atomic_inc(&adev.count); + + wake_up_interruptible(&adev.misc_wait); + kill_fasync(&adev.async_queue, SIGIO, POLL_IN); + return IRQ_HANDLED; +} + +static int lis3lv02d_misc_open(struct inode *inode, struct file *file) +{ + int ret; + + if (test_and_set_bit(0, &adev.misc_opened)) + return -EBUSY; /* already open */ + + atomic_set(&adev.count, 0); + + /* + * The sensor can generate interrupts for free-fall and direction + * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep + * the things simple and _fast_ we activate it only for free-fall, so + * no need to read register (very slow with ACPI). For the same reason, + * we forbid shared interrupts. + * + * IRQF_TRIGGER_RISING seems pointless on HP laptops because the + * io-apic is not configurable (and generates a warning) but I keep it + * in case of support for other hardware. + */ + ret = request_irq(adev.irq, lis302dl_interrupt, IRQF_TRIGGER_RISING, + DRIVER_NAME, &adev); + + if (ret) { + clear_bit(0, &adev.misc_opened); + printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", adev.irq); + return -EBUSY; + } + lis3lv02d_increase_use(&adev); + printk("lis3: registered interrupt %d\n", adev.irq); + return 0; +} + +static int lis3lv02d_misc_release(struct inode *inode, struct file *file) +{ + fasync_helper(-1, file, 0, &adev.async_queue); + lis3lv02d_decrease_use(&adev); + free_irq(adev.irq, &adev); + clear_bit(0, &adev.misc_opened); /* release the device */ + return 0; +} + +static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf, + size_t count, loff_t *pos) +{ + DECLARE_WAITQUEUE(wait, current); + u32 data; + unsigned char byte_data; + ssize_t retval = 1; + + if (count < 1) + return -EINVAL; + + add_wait_queue(&adev.misc_wait, &wait); + while (true) { + set_current_state(TASK_INTERRUPTIBLE); + data = atomic_xchg(&adev.count, 0); + if (data) + break; + + if (file->f_flags & O_NONBLOCK) { + retval = -EAGAIN; + goto out; + } + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + goto out; + } + + schedule(); + } + + if (data < 255) + byte_data = data; + else + byte_data = 255; + + /* make sure we are not going into copy_to_user() with + * TASK_INTERRUPTIBLE state */ + set_current_state(TASK_RUNNING); + if (copy_to_user(buf, &byte_data, sizeof(byte_data))) + retval = -EFAULT; + +out: + __set_current_state(TASK_RUNNING); + remove_wait_queue(&adev.misc_wait, &wait); + + return retval; +} + +static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait) +{ + poll_wait(file, &adev.misc_wait, wait); + if (atomic_read(&adev.count)) + return POLLIN | POLLRDNORM; + return 0; +} + +static int lis3lv02d_misc_fasync(int fd, struct file *file, int on) +{ + return fasync_helper(fd, file, on, &adev.async_queue); +} + +static const struct file_operations lis3lv02d_misc_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = lis3lv02d_misc_read, + .open = lis3lv02d_misc_open, + .release = lis3lv02d_misc_release, + .poll = lis3lv02d_misc_poll, + .fasync = lis3lv02d_misc_fasync, +}; + +static struct miscdevice lis3lv02d_misc_device = { + .minor = MISC_DYNAMIC_MINOR, + .name = "freefall", + .fops = &lis3lv02d_misc_fops, +}; + /** * lis3lv02d_joystick_kthread - Kthread polling function * @data: unused - here to conform to threadfn prototype @@ -203,7 +315,6 @@ static void lis3lv02d_joystick_close(struct input_dev *input) lis3lv02d_decrease_use(&adev); } - static inline void lis3lv02d_calibrate_joystick(void) { lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib); @@ -231,9 +342,9 @@ int lis3lv02d_joystick_enable(void) adev.idev->close = lis3lv02d_joystick_close; set_bit(EV_ABS, adev.idev->evbit); - input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); - input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); - input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + input_set_abs_params(adev.idev, ABS_X, -adev.mdps_max_val, adev.mdps_max_val, 3, 3); + input_set_abs_params(adev.idev, ABS_Y, -adev.mdps_max_val, adev.mdps_max_val, 3, 3); + input_set_abs_params(adev.idev, ABS_Z, -adev.mdps_max_val, adev.mdps_max_val, 3, 3); err = input_register_device(adev.idev); if (err) { @@ -250,6 +361,7 @@ void lis3lv02d_joystick_disable(void) if (!adev.idev) return; + misc_deregister(&lis3lv02d_misc_device); input_unregister_device(adev.idev); adev.idev = NULL; } @@ -268,6 +380,19 @@ int lis3lv02d_init_device(struct acpi_lis3lv02d *dev) if (lis3lv02d_joystick_enable()) printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n"); + printk("lis3_init_device: irq %d\n", dev->irq); + + /* if we did not get an IRQ from ACPI - we have nothing more to do */ + if (!dev->irq) { + printk(KERN_ERR DRIVER_NAME + ": No IRQ in ACPI. Disabling /dev/freefall\n"); + goto out; + } + + printk("lis3: registering device\n"); + if (misc_register(&lis3lv02d_misc_device)) + printk(KERN_ERR DRIVER_NAME ": misc_register failed\n"); +out: lis3lv02d_decrease_use(dev); return 0; } @@ -351,6 +476,6 @@ int lis3lv02d_remove_fs(void) EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs); MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver"); -MODULE_AUTHOR("Yan Burman and Eric Piel"); +MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h index 223f1c0763bb..75972bf372ff 100644 --- a/drivers/hwmon/lis3lv02d.h +++ b/drivers/hwmon/lis3lv02d.h @@ -22,12 +22,15 @@ /* * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to * be connected via SPI. There exists also several similar chips (such as LIS302DL or - * LIS3L02DQ) but not in the HP laptops and they have slightly different registers. + * LIS3L02DQ) and they have slightly different registers, but we can provide a + * common interface for all of them. * They can also be connected via I²C. */ -#define LIS3LV02DL_ID 0x3A /* Also the LIS3LV02DQ */ -#define LIS302DL_ID 0x3B /* Also the LIS202DL! */ +/* 2-byte registers */ +#define LIS_DOUBLE_ID 0x3A /* LIS3LV02D[LQ] */ +/* 1-byte registers */ +#define LIS_SINGLE_ID 0x3B /* LIS[32]02DL and others */ enum lis3lv02d_reg { WHO_AM_I = 0x0F, @@ -44,10 +47,13 @@ enum lis3lv02d_reg { STATUS_REG = 0x27, OUTX_L = 0x28, OUTX_H = 0x29, + OUTX = 0x29, OUTY_L = 0x2A, OUTY_H = 0x2B, + OUTY = 0x2B, OUTZ_L = 0x2C, OUTZ_H = 0x2D, + OUTZ = 0x2D, FF_WU_CFG = 0x30, FF_WU_SRC = 0x31, FF_WU_ACK = 0x32, @@ -159,6 +165,10 @@ struct acpi_lis3lv02d { acpi_status (*write) (acpi_handle handle, int reg, u8 val); acpi_status (*read) (acpi_handle handle, int reg, u8 *ret); + u8 whoami; /* 3Ah: 2-byte registries, 3Bh: 1-byte registries */ + s16 (*read_data) (acpi_handle handle, int reg); + int mdps_max_val; + struct input_dev *idev; /* input device */ struct task_struct *kthread; /* kthread for input */ struct mutex lock; @@ -170,6 +180,11 @@ struct acpi_lis3lv02d { unsigned char is_on; /* whether the device is on or off */ unsigned char usage; /* usage counter */ struct axis_conversion ac; /* hw -> logical axis */ + + u32 irq; /* IRQ number */ + struct fasync_struct *async_queue; /* queue for the misc device */ + wait_queue_head_t misc_wait; /* Wait queue for the misc device */ + unsigned long misc_opened; /* bit0: whether the device is open */ }; int lis3lv02d_init_device(struct acpi_lis3lv02d *dev); diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c index b0ce37852281..73f77a9b8b18 100644 --- a/drivers/hwmon/vt1211.c +++ b/drivers/hwmon/vt1211.c @@ -1262,7 +1262,7 @@ static int __init vt1211_device_add(unsigned short address) res.name = pdev->name; err = acpi_check_resource_conflict(&res); if (err) - goto EXIT; + goto EXIT_DEV_PUT; err = platform_device_add_resources(pdev, &res, 1); if (err) { diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index cb808d015361..feae743ba991 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -1548,7 +1548,7 @@ static int __init sensors_w83627ehf_init(void) err = acpi_check_resource_conflict(&res); if (err) - goto exit; + goto exit_device_put; err = platform_device_add_resources(pdev, &res, 1); if (err) { diff --git a/drivers/isdn/sc/shmem.c b/drivers/isdn/sc/shmem.c index 712220cef139..7f16d75d2d89 100644 --- a/drivers/isdn/sc/shmem.c +++ b/drivers/isdn/sc/shmem.c @@ -54,7 +54,7 @@ void memcpy_toshmem(int card, void *dest, const void *src, size_t n) spin_unlock_irqrestore(&sc_adapter[card]->lock, flags); pr_debug("%s: set page to %#x\n",sc_adapter[card]->devicename, ((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE)>>14)|0x80); - pr_debug("%s: copying %d bytes from %#lx to %#lx\n", + pr_debug("%s: copying %zu bytes from %#lx to %#lx\n", sc_adapter[card]->devicename, n, (unsigned long) src, sc_adapter[card]->rambase + ((unsigned long) dest %0x4000)); diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index a34338567a2a..f14813be4eff 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -328,7 +328,7 @@ static void dispatch_io(int rw, unsigned int num_regions, struct dpages old_pages = *dp; if (sync) - rw |= (1 << BIO_RW_SYNC); + rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG); /* * For multiple regions we need to be careful to rewind diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 3073618269ea..0a225da21272 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -344,7 +344,7 @@ static int run_io_job(struct kcopyd_job *job) { int r; struct dm_io_request io_req = { - .bi_rw = job->rw | (1 << BIO_RW_SYNC), + .bi_rw = job->rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG), .mem.type = DM_IO_PAGE_LIST, .mem.ptr.pl = job->pages, .mem.offset = job->offset, diff --git a/drivers/md/md.c b/drivers/md/md.c index 4495104f6c9f..03b4cd0a6344 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -474,7 +474,7 @@ void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev, * causes ENOTSUPP, we allocate a spare bio... */ struct bio *bio = bio_alloc(GFP_NOIO, 1); - int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNC); + int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNCIO) | (1<<BIO_RW_UNPLUG); bio->bi_bdev = rdev->bdev; bio->bi_sector = sector; @@ -531,7 +531,7 @@ int sync_page_io(struct block_device *bdev, sector_t sector, int size, struct completion event; int ret; - rw |= (1 << BIO_RW_SYNC); + rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG); bio->bi_bdev = bdev; bio->bi_sector = sector; diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c index de7adaf5fa5b..78412c9c424a 100644 --- a/drivers/media/common/tuners/tuner-simple.c +++ b/drivers/media/common/tuners/tuner-simple.c @@ -318,7 +318,6 @@ static int simple_std_setup(struct dvb_frontend *fe, u8 *config, u8 *cb) { struct tuner_simple_priv *priv = fe->tuner_priv; - u8 tuneraddr; int rc; /* tv norm specific stuff for multi-norm tuners */ @@ -387,6 +386,7 @@ static int simple_std_setup(struct dvb_frontend *fe, case TUNER_PHILIPS_TUV1236D: { + struct tuner_i2c_props i2c = priv->i2c_props; /* 0x40 -> ATSC antenna input 1 */ /* 0x48 -> ATSC antenna input 2 */ /* 0x00 -> NTSC antenna input 1 */ @@ -398,17 +398,15 @@ static int simple_std_setup(struct dvb_frontend *fe, buffer[1] = 0x04; } /* set to the correct mode (analog or digital) */ - tuneraddr = priv->i2c_props.addr; - priv->i2c_props.addr = 0x0a; - rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[0], 2); + i2c.addr = 0x0a; + rc = tuner_i2c_xfer_send(&i2c, &buffer[0], 2); if (2 != rc) tuner_warn("i2c i/o error: rc == %d " "(should be 2)\n", rc); - rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[2], 2); + rc = tuner_i2c_xfer_send(&i2c, &buffer[2], 2); if (2 != rc) tuner_warn("i2c i/o error: rc == %d " "(should be 2)\n", rc); - priv->i2c_props.addr = tuneraddr; break; } } diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c index 0c733c66a441..069d847ba887 100644 --- a/drivers/media/dvb/dvb-core/dmxdev.c +++ b/drivers/media/dvb/dvb-core/dmxdev.c @@ -364,16 +364,15 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len, enum dmx_success success) { struct dmxdev_filter *dmxdevfilter = filter->priv; - unsigned long flags; int ret; if (dmxdevfilter->buffer.error) { wake_up(&dmxdevfilter->buffer.queue); return 0; } - spin_lock_irqsave(&dmxdevfilter->dev->lock, flags); + spin_lock(&dmxdevfilter->dev->lock); if (dmxdevfilter->state != DMXDEV_STATE_GO) { - spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); + spin_unlock(&dmxdevfilter->dev->lock); return 0; } del_timer(&dmxdevfilter->timer); @@ -392,7 +391,7 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len, } if (dmxdevfilter->params.sec.flags & DMX_ONESHOT) dmxdevfilter->state = DMXDEV_STATE_DONE; - spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); + spin_unlock(&dmxdevfilter->dev->lock); wake_up(&dmxdevfilter->buffer.queue); return 0; } @@ -404,12 +403,11 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len, { struct dmxdev_filter *dmxdevfilter = feed->priv; struct dvb_ringbuffer *buffer; - unsigned long flags; int ret; - spin_lock_irqsave(&dmxdevfilter->dev->lock, flags); + spin_lock(&dmxdevfilter->dev->lock); if (dmxdevfilter->params.pes.output == DMX_OUT_DECODER) { - spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); + spin_unlock(&dmxdevfilter->dev->lock); return 0; } @@ -419,7 +417,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len, else buffer = &dmxdevfilter->dev->dvr_buffer; if (buffer->error) { - spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); + spin_unlock(&dmxdevfilter->dev->lock); wake_up(&buffer->queue); return 0; } @@ -430,7 +428,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len, dvb_ringbuffer_flush(buffer); buffer->error = ret; } - spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); + spin_unlock(&dmxdevfilter->dev->lock); wake_up(&buffer->queue); return 0; } diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c index a2c1fd5d2f67..e2eca0b1fe7c 100644 --- a/drivers/media/dvb/dvb-core/dvb_demux.c +++ b/drivers/media/dvb/dvb-core/dvb_demux.c @@ -399,9 +399,7 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf) void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf, size_t count) { - unsigned long flags; - - spin_lock_irqsave(&demux->lock, flags); + spin_lock(&demux->lock); while (count--) { if (buf[0] == 0x47) @@ -409,17 +407,16 @@ void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf, buf += 188; } - spin_unlock_irqrestore(&demux->lock, flags); + spin_unlock(&demux->lock); } EXPORT_SYMBOL(dvb_dmx_swfilter_packets); void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count) { - unsigned long flags; int p = 0, i, j; - spin_lock_irqsave(&demux->lock, flags); + spin_lock(&demux->lock); if (demux->tsbufp) { i = demux->tsbufp; @@ -452,18 +449,17 @@ void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count) } bailout: - spin_unlock_irqrestore(&demux->lock, flags); + spin_unlock(&demux->lock); } EXPORT_SYMBOL(dvb_dmx_swfilter); void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count) { - unsigned long flags; int p = 0, i, j; u8 tmppack[188]; - spin_lock_irqsave(&demux->lock, flags); + spin_lock(&demux->lock); if (demux->tsbufp) { i = demux->tsbufp; @@ -504,7 +500,7 @@ void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count) } bailout: - spin_unlock_irqrestore(&demux->lock, flags); + spin_unlock(&demux->lock); } EXPORT_SYMBOL(dvb_dmx_swfilter_204); diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 67cbce82cb91..4dfed6aa2dbc 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -98,11 +98,16 @@ * - blacklisted KWorld radio in hid-core.c and hid-ids.h * 2008-12-03 Mark Lord <mlord@pobox.com> * - add support for DealExtreme USB Radio + * 2009-01-31 Bob Ross <pigiron@gmx.com> + * - correction of stereo detection/setting + * - correction of signal strength indicator scaling + * 2009-01-31 Rick Bronson <rick@efn.org> + * Tobias Lorenz <tobias.lorenz@gmx.net> + * - add LED status output * * ToDo: * - add firmware download/update support * - RDS support: interrupt mode, instead of polling - * - add LED status output (check if that's not already done in firmware) */ @@ -882,6 +887,30 @@ static int si470x_rds_on(struct si470x_device *radio) /************************************************************************** + * General Driver Functions - LED_REPORT + **************************************************************************/ + +/* + * si470x_set_led_state - sets the led state + */ +static int si470x_set_led_state(struct si470x_device *radio, + unsigned char led_state) +{ + unsigned char buf[LED_REPORT_SIZE]; + int retval; + + buf[0] = LED_REPORT; + buf[1] = LED_COMMAND; + buf[2] = led_state; + + retval = si470x_set_report(radio, (void *) &buf, sizeof(buf)); + + return (retval < 0) ? -EINVAL : 0; +} + + + +/************************************************************************** * RDS Driver Functions **************************************************************************/ @@ -1385,20 +1414,22 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv, }; /* stereo indicator == stereo (instead of mono) */ - if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 1) - tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; - else + if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 0) tuner->rxsubchans = V4L2_TUNER_SUB_MONO; + else + tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; /* mono/stereo selector */ - if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 1) - tuner->audmode = V4L2_TUNER_MODE_MONO; - else + if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 0) tuner->audmode = V4L2_TUNER_MODE_STEREO; + else + tuner->audmode = V4L2_TUNER_MODE_MONO; /* min is worst, max is best; signal:0..0xffff; rssi: 0..0xff */ - tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI) - * 0x0101; + /* measured in units of dbµV in 1 db increments (max at ~75 dbµV) */ + tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI); + /* the ideal factor is 0xffff/75 = 873,8 */ + tuner->signal = (tuner->signal * 873) + (8 * tuner->signal / 10); /* automatic frequency control: -1: freq to low, 1 freq to high */ /* AFCRL does only indicate that freq. differs, not if too low/high */ @@ -1632,6 +1663,9 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, /* set initial frequency */ si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */ + /* set led to connect state */ + si470x_set_led_state(radio, BLINK_GREEN_LED); + /* rds buffer allocation */ radio->buf_size = rds_buf * 3; radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL); @@ -1715,6 +1749,9 @@ static void si470x_usb_driver_disconnect(struct usb_interface *intf) cancel_delayed_work_sync(&radio->work); usb_set_intfdata(intf, NULL); if (radio->users == 0) { + /* set led to disconnect state */ + si470x_set_led_state(radio, BLINK_ORANGE_LED); + video_unregister_device(radio->videodev); kfree(radio->buffer); kfree(radio); diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 2ed24527ecd6..65e4901f4db7 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -422,6 +422,7 @@ static void destroy_urbs(struct gspca_dev *gspca_dev) if (urb == NULL) break; + BUG_ON(!gspca_dev->dev); gspca_dev->urb[i] = NULL; if (!gspca_dev->present) usb_kill_urb(urb); @@ -1950,8 +1951,12 @@ void gspca_disconnect(struct usb_interface *intf) { struct gspca_dev *gspca_dev = usb_get_intfdata(intf); + mutex_lock(&gspca_dev->usb_lock); gspca_dev->present = 0; + mutex_unlock(&gspca_dev->usb_lock); + destroy_urbs(gspca_dev); + gspca_dev->dev = NULL; usb_set_intfdata(intf, NULL); /* release the device */ diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index f6b3ef6e691b..c13bd2aa0bea 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -393,7 +393,7 @@ static int ivtv_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_fo return 0; } - v4l2_subdev_call(itv->sd_video, video, s_fmt, fmt); + v4l2_subdev_call(itv->sd_video, video, g_fmt, fmt); vbifmt->service_set = ivtv_get_service_set(vbifmt); return 0; } @@ -1748,6 +1748,18 @@ static long ivtv_default(struct file *file, void *fh, int cmd, void *arg) break; } + case IVTV_IOC_DMA_FRAME: + case VIDEO_GET_PTS: + case VIDEO_GET_FRAME_COUNT: + case VIDEO_GET_EVENT: + case VIDEO_PLAY: + case VIDEO_STOP: + case VIDEO_FREEZE: + case VIDEO_CONTINUE: + case VIDEO_COMMAND: + case VIDEO_TRY_COMMAND: + return ivtv_decoder_ioctls(file, cmd, (void *)arg); + default: return -EINVAL; } @@ -1790,18 +1802,6 @@ static long ivtv_serialized_ioctl(struct ivtv *itv, struct file *filp, ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode); return 0; - case IVTV_IOC_DMA_FRAME: - case VIDEO_GET_PTS: - case VIDEO_GET_FRAME_COUNT: - case VIDEO_GET_EVENT: - case VIDEO_PLAY: - case VIDEO_STOP: - case VIDEO_FREEZE: - case VIDEO_CONTINUE: - case VIDEO_COMMAND: - case VIDEO_TRY_COMMAND: - return ivtv_decoder_ioctls(filp, cmd, (void *)arg); - default: break; } diff --git a/drivers/mfd/htc-egpio.c b/drivers/mfd/htc-egpio.c index 1a4d04664d6d..aa266e1f69b2 100644 --- a/drivers/mfd/htc-egpio.c +++ b/drivers/mfd/htc-egpio.c @@ -286,7 +286,7 @@ static int __init egpio_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) goto fail; - ei->base_addr = ioremap_nocache(res->start, res->end - res->start); + ei->base_addr = ioremap_nocache(res->start, resource_size(res)); if (!ei->base_addr) goto fail; pr_debug("EGPIO phys=%08x virt=%p\n", (u32)res->start, ei->base_addr); @@ -307,7 +307,7 @@ static int __init egpio_probe(struct platform_device *pdev) ei->nchips = pdata->num_chips; ei->chip = kzalloc(sizeof(struct egpio_chip) * ei->nchips, GFP_KERNEL); - if (!ei) { + if (!ei->chip) { ret = -ENOMEM; goto fail; } diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index ea9488e7ad6d..2e36057659e1 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -678,6 +678,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client) static struct i2c_device_id pcf50633_id_table[] = { {"pcf50633", 0x73}, + {/* end of list */} }; static struct i2c_driver pcf50633_driver = { diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index 0e5761f12634..4c7b7962f6b8 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -1050,7 +1050,7 @@ static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm, return gpiochip_add(gchip); } -static int sm501_register_gpio(struct sm501_devdata *sm) +static int __devinit sm501_register_gpio(struct sm501_devdata *sm) { struct sm501_gpio *gpio = &sm->gpio; resource_size_t iobase = sm->io_res->start + SM501_GPIO; @@ -1321,7 +1321,7 @@ static unsigned int sm501_mem_local[] = { * Common init code for an SM501 */ -static int sm501_init_dev(struct sm501_devdata *sm) +static int __devinit sm501_init_dev(struct sm501_devdata *sm) { struct sm501_initdata *idata; struct sm501_platdata *pdata; @@ -1397,7 +1397,7 @@ static int sm501_init_dev(struct sm501_devdata *sm) return 0; } -static int sm501_plat_probe(struct platform_device *dev) +static int __devinit sm501_plat_probe(struct platform_device *dev) { struct sm501_devdata *sm; int ret; @@ -1586,8 +1586,8 @@ static struct sm501_platdata sm501_pci_platdata = { .gpio_base = -1, }; -static int sm501_pci_probe(struct pci_dev *dev, - const struct pci_device_id *id) +static int __devinit sm501_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) { struct sm501_devdata *sm; int err; @@ -1693,7 +1693,7 @@ static void sm501_dev_remove(struct sm501_devdata *sm) sm501_gpio_remove(sm); } -static void sm501_pci_remove(struct pci_dev *dev) +static void __devexit sm501_pci_remove(struct pci_dev *dev) { struct sm501_devdata *sm = pci_get_drvdata(dev); @@ -1727,16 +1727,16 @@ static struct pci_device_id sm501_pci_tbl[] = { MODULE_DEVICE_TABLE(pci, sm501_pci_tbl); -static struct pci_driver sm501_pci_drv = { +static struct pci_driver sm501_pci_driver = { .name = "sm501", .id_table = sm501_pci_tbl, .probe = sm501_pci_probe, - .remove = sm501_pci_remove, + .remove = __devexit_p(sm501_pci_remove), }; MODULE_ALIAS("platform:sm501"); -static struct platform_driver sm501_plat_drv = { +static struct platform_driver sm501_plat_driver = { .driver = { .name = "sm501", .owner = THIS_MODULE, @@ -1749,14 +1749,14 @@ static struct platform_driver sm501_plat_drv = { static int __init sm501_base_init(void) { - platform_driver_register(&sm501_plat_drv); - return pci_register_driver(&sm501_pci_drv); + platform_driver_register(&sm501_plat_driver); + return pci_register_driver(&sm501_pci_driver); } static void __exit sm501_base_exit(void) { - platform_driver_unregister(&sm501_plat_drv); - pci_unregister_driver(&sm501_pci_drv); + platform_driver_unregister(&sm501_plat_driver); + pci_unregister_driver(&sm501_pci_driver); } module_init(sm501_base_init); diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index e7ab0035d305..68826f1e36bc 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -38,7 +38,7 @@ #include <linux/i2c.h> #include <linux/i2c/twl4030.h> -#ifdef CONFIG_ARM +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) #include <mach/cpu.h> #endif diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index f92595c8f165..84d5ea1ec171 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -1111,7 +1111,7 @@ int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref) do { schedule_timeout_interruptible(1); reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1); - } while (tries-- && (reg & WM8350_AUXADC_POLL)); + } while (--tries && (reg & WM8350_AUXADC_POLL)); if (!tries) dev_err(wm8350->dev, "adc chn %d read timeout\n", channel); @@ -1297,14 +1297,29 @@ static void wm8350_client_dev_register(struct wm8350 *wm8350, int wm8350_device_init(struct wm8350 *wm8350, int irq, struct wm8350_platform_data *pdata) { - int ret = -EINVAL; + int ret; u16 id1, id2, mask_rev; u16 cust_id, mode, chip_rev; /* get WM8350 revision and config mode */ - wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1); - wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2); - wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), &mask_rev); + ret = wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1); + if (ret != 0) { + dev_err(wm8350->dev, "Failed to read ID: %d\n", ret); + goto err; + } + + ret = wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2); + if (ret != 0) { + dev_err(wm8350->dev, "Failed to read ID: %d\n", ret); + goto err; + } + + ret = wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), + &mask_rev); + if (ret != 0) { + dev_err(wm8350->dev, "Failed to read revision: %d\n", ret); + goto err; + } id1 = be16_to_cpu(id1); id2 = be16_to_cpu(id2); @@ -1404,14 +1419,12 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, return ret; } - if (pdata && pdata->init) { - ret = pdata->init(wm8350); - if (ret != 0) { - dev_err(wm8350->dev, "Platform init() failed: %d\n", - ret); - goto err; - } - } + wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0xFFFF); + wm8350_reg_write(wm8350, WM8350_INT_STATUS_1_MASK, 0xFFFF); + wm8350_reg_write(wm8350, WM8350_INT_STATUS_2_MASK, 0xFFFF); + wm8350_reg_write(wm8350, WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, 0xFFFF); + wm8350_reg_write(wm8350, WM8350_GPIO_INT_STATUS_MASK, 0xFFFF); + wm8350_reg_write(wm8350, WM8350_COMPARATOR_INT_STATUS_MASK, 0xFFFF); mutex_init(&wm8350->auxadc_mutex); mutex_init(&wm8350->irq_mutex); @@ -1430,6 +1443,15 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, } wm8350->chip_irq = irq; + if (pdata && pdata->init) { + ret = pdata->init(wm8350); + if (ret != 0) { + dev_err(wm8350->dev, "Platform init() failed: %d\n", + ret); + goto err; + } + } + wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0); wm8350_client_dev_register(wm8350, "wm8350-codec", diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c index 68887b817d17..9a4cc954cb7c 100644 --- a/drivers/mfd/wm8350-regmap.c +++ b/drivers/mfd/wm8350-regmap.c @@ -3188,7 +3188,7 @@ const struct wm8350_reg_access wm8350_reg_io_map[] = { { 0x7CFF, 0x0C00, 0x7FFF }, /* R1 - ID */ { 0x0000, 0x0000, 0x0000 }, /* R2 */ { 0xBE3B, 0xBE3B, 0x8000 }, /* R3 - System Control 1 */ - { 0xFCF7, 0xFCF7, 0xF800 }, /* R4 - System Control 2 */ + { 0xFEF7, 0xFEF7, 0xF800 }, /* R4 - System Control 2 */ { 0x80FF, 0x80FF, 0x8000 }, /* R5 - System Hibernate */ { 0xFB0E, 0xFB0E, 0x0000 }, /* R6 - Interface Control */ { 0x0000, 0x0000, 0x0000 }, /* R7 */ diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 45b1f430685f..513eb09a638f 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -584,7 +584,7 @@ static int mmc_blk_probe(struct mmc_card *card) if (err) goto out; - string_get_size(get_capacity(md->disk) << 9, STRING_UNITS_2, + string_get_size((u64)get_capacity(md->disk) << 9, STRING_UNITS_2, cap_str, sizeof(cap_str)); printk(KERN_INFO "%s: %s %s %s %s\n", md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index b92b172074ee..b9f1e84897cc 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -494,7 +494,7 @@ static int mmc_test_basic_read(struct mmc_test_card *test) sg_init_one(&sg, test->buffer, 512); - ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 1); + ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 0); if (ret) return ret; diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 76bfe16c09b1..2b1196e6142c 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1548,9 +1548,10 @@ static bool filter(struct dma_chan *chan, void *slave) { struct dw_dma_slave *dws = slave; - if (dws->dma_dev == chan->device->dev) + if (dws->dma_dev == chan->device->dev) { + chan->private = dws; return true; - else + } else return false; } #endif diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index db37490f67ec..a631c81dce12 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -55,6 +55,7 @@ #define VS30 (1 << 25) #define SDVS18 (0x5 << 9) #define SDVS30 (0x6 << 9) +#define SDVS33 (0x7 << 9) #define SDVSCLR 0xFFFFF1FF #define SDVSDET 0x00000400 #define AUTOIDLE 0x1 @@ -375,6 +376,32 @@ static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status) } #endif /* CONFIG_MMC_DEBUG */ +/* + * MMC controller internal state machines reset + * + * Used to reset command or data internal state machines, using respectively + * SRC or SRD bit of SYSCTL register + * Can be called from interrupt context + */ +static inline void mmc_omap_reset_controller_fsm(struct mmc_omap_host *host, + unsigned long bit) +{ + unsigned long i = 0; + unsigned long limit = (loops_per_jiffy * + msecs_to_jiffies(MMC_TIMEOUT_MS)); + + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | bit); + + while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) && + (i++ < limit)) + cpu_relax(); + + if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit) + dev_err(mmc_dev(host->mmc), + "Timeout waiting on controller reset in %s\n", + __func__); +} /* * MMC controller IRQ handler @@ -403,21 +430,17 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) (status & CMD_CRC)) { if (host->cmd) { if (status & CMD_TIMEOUT) { - OMAP_HSMMC_WRITE(host->base, SYSCTL, - OMAP_HSMMC_READ(host->base, - SYSCTL) | SRC); - while (OMAP_HSMMC_READ(host->base, - SYSCTL) & SRC) - ; - + mmc_omap_reset_controller_fsm(host, SRC); host->cmd->error = -ETIMEDOUT; } else { host->cmd->error = -EILSEQ; } end_cmd = 1; } - if (host->data) + if (host->data) { mmc_dma_cleanup(host); + mmc_omap_reset_controller_fsm(host, SRD); + } } if ((status & DATA_TIMEOUT) || (status & DATA_CRC)) { @@ -426,12 +449,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) mmc_dma_cleanup(host); else host->data->error = -EILSEQ; - OMAP_HSMMC_WRITE(host->base, SYSCTL, - OMAP_HSMMC_READ(host->base, - SYSCTL) | SRD); - while (OMAP_HSMMC_READ(host->base, - SYSCTL) & SRD) - ; + mmc_omap_reset_controller_fsm(host, SRD); end_trans = 1; } } @@ -456,13 +474,20 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) } /* - * Switch MMC operating voltage + * Switch MMC interface voltage ... only relevant for MMC1. + * + * MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver. + * The MMC2 transceiver controls are used instead of DAT4..DAT7. + * Some chips, like eMMC ones, use internal transceivers. */ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd) { u32 reg_val = 0; int ret; + if (host->id != OMAP_MMC1_DEVID) + return 0; + /* Disable the clocks */ clk_disable(host->fclk); clk_disable(host->iclk); @@ -485,19 +510,26 @@ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd) OMAP_HSMMC_WRITE(host->base, HCTL, OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR); reg_val = OMAP_HSMMC_READ(host->base, HCTL); + /* * If a MMC dual voltage card is detected, the set_ios fn calls * this fn with VDD bit set for 1.8V. Upon card removal from the * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF. * - * Only MMC1 supports 3.0V. MMC2 will not function if SDVS30 is - * set in HCTL. + * Cope with a bit of slop in the range ... per data sheets: + * - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max, + * but recommended values are 1.71V to 1.89V + * - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max, + * but recommended values are 2.7V to 3.3V + * + * Board setup code shouldn't permit anything very out-of-range. + * TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the + * middle range) but VSIM can't power DAT4..DAT7 at more than 3V. */ - if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) || - ((1 << vdd) == MMC_VDD_33_34))) - reg_val |= SDVS30; - if ((1 << vdd) == MMC_VDD_165_195) + if ((1 << vdd) <= MMC_VDD_23_24) reg_val |= SDVS18; + else + reg_val |= SDVS30; OMAP_HSMMC_WRITE(host->base, HCTL, reg_val); @@ -517,16 +549,15 @@ static void mmc_omap_detect(struct work_struct *work) { struct mmc_omap_host *host = container_of(work, struct mmc_omap_host, mmc_carddetect_work); + struct omap_mmc_slot_data *slot = &mmc_slot(host); + + host->carddetect = slot->card_detect(slot->card_detect_irq); sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch"); if (host->carddetect) { mmc_detect_change(host->mmc, (HZ * 200) / 1000); } else { - OMAP_HSMMC_WRITE(host->base, SYSCTL, - OMAP_HSMMC_READ(host->base, SYSCTL) | SRD); - while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD) - ; - + mmc_omap_reset_controller_fsm(host, SRD); mmc_detect_change(host->mmc, (HZ * 50) / 1000); } } @@ -538,7 +569,6 @@ static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id) { struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id; - host->carddetect = mmc_slot(host).card_detect(irq); schedule_work(&host->mmc_carddetect_work); return IRQ_HANDLED; @@ -757,10 +787,14 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_OFF: mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); /* - * Reset bus voltage to 3V if it got set to 1.8V earlier. + * Reset interface voltage to 3V if it's 1.8V now; + * only relevant on MMC-1, the others always use 1.8V. + * * REVISIT: If we are able to detect cards after unplugging * a 1.8V card, this code should not be needed. */ + if (host->id != OMAP_MMC1_DEVID) + break; if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) { int vdd = fls(host->mmc->ocr_avail) - 1; if (omap_mmc_switch_opcond(host, vdd) != 0) @@ -784,7 +818,9 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } if (host->id == OMAP_MMC1_DEVID) { - /* Only MMC1 can operate at 3V/1.8V */ + /* Only MMC1 can interface at 3V without some flavor + * of external transceiver; but they all handle 1.8V. + */ if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) && (ios->vdd == DUAL_VOLT_OCR_BIT)) { /* @@ -1137,7 +1173,9 @@ static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state) " level suspend\n"); } - if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) { + if (host->id == OMAP_MMC1_DEVID + && !(OMAP_HSMMC_READ(host->base, HCTL) + & SDVSDET)) { OMAP_HSMMC_WRITE(host->base, HCTL, OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR); diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 35a98eec7414..f4a67c65d301 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -329,7 +329,7 @@ static void do_pio_write(struct s3cmci_host *host) to_ptr = host->base + host->sdidata; - while ((fifo = fifo_free(host))) { + while ((fifo = fifo_free(host)) > 3) { if (!host->pio_bytes) { res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr); diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index f07255cb17ee..8cff5f5e7f86 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -144,8 +144,7 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) SDHCI_QUIRK_32BIT_DMA_SIZE | SDHCI_QUIRK_32BIT_ADMA_SIZE | SDHCI_QUIRK_RESET_AFTER_REQUEST | - SDHCI_QUIRK_BROKEN_SMALL_PIO | - SDHCI_QUIRK_FORCE_HIGHSPEED; + SDHCI_QUIRK_BROKEN_SMALL_PIO; } /* diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 6b2d1f99af67..f52f3053ed92 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1636,8 +1636,7 @@ int sdhci_add_host(struct sdhci_host *host) mmc->f_max = host->max_clk; mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; - if ((caps & SDHCI_CAN_DO_HISPD) || - (host->quirks & SDHCI_QUIRK_FORCE_HIGHSPEED)) + if (caps & SDHCI_CAN_DO_HISPD) mmc->caps |= MMC_CAP_SD_HIGHSPEED; mmc->ocr_avail = 0; @@ -1723,7 +1722,9 @@ int sdhci_add_host(struct sdhci_host *host) #endif #ifdef SDHCI_USE_LEDS_CLASS - host->led.name = mmc_hostname(mmc); + snprintf(host->led_name, sizeof(host->led_name), + "%s::", mmc_hostname(mmc)); + host->led.name = host->led_name; host->led.brightness = LED_OFF; host->led.default_trigger = mmc_hostname(mmc); host->led.brightness_set = sdhci_led_control; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 3efba2363941..ebb83657e27a 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -208,8 +208,6 @@ struct sdhci_host { #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) /* Controller has an issue with buffer bits for small transfers */ #define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) -/* Controller supports high speed but doesn't have the caps bit set */ -#define SDHCI_QUIRK_FORCE_HIGHSPEED (1<<14) int irq; /* Device IRQ */ void __iomem * ioaddr; /* Mapped address */ @@ -222,6 +220,7 @@ struct sdhci_host { #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) struct led_classdev led; /* LED control */ + char led_name[32]; #endif spinlock_t lock; /* Mutex */ diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index c98c1570a40b..47a33cec3793 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -139,7 +139,8 @@ static int atmel_nand_device_ready(struct mtd_info *mtd) struct nand_chip *nand_chip = mtd->priv; struct atmel_nand_host *host = nand_chip->priv; - return gpio_get_value(host->board->rdy_pin); + return gpio_get_value(host->board->rdy_pin) ^ + !!host->board->rdy_pin_active_low; } /* diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 683a5ac4e122..7159a39aa2b9 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2352,6 +2352,17 @@ config ATL1E To compile this driver as a module, choose M here. The module will be called atl1e. +config ATL1C + tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + select CRC32 + select MII + help + This driver supports the Atheros L1C gigabit ethernet adapter. + + To compile this driver as a module, choose M here. The module + will be called atl1c. + config JME tristate "JMicron(R) PCI-Express Gigabit Ethernet support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index ad87ba72cf1f..3f8cb311e077 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_BONDING) += bonding/ obj-$(CONFIG_ATL1) += atlx/ obj-$(CONFIG_ATL2) += atlx/ obj-$(CONFIG_ATL1E) += atl1e/ +obj-$(CONFIG_ATL1C) += atl1c/ obj-$(CONFIG_GIANFAR) += gianfar_driver.o obj-$(CONFIG_TEHUTI) += tehuti.o obj-$(CONFIG_ENIC) += enic/ diff --git a/drivers/net/atl1c/Makefile b/drivers/net/atl1c/Makefile new file mode 100644 index 000000000000..c37d966952ee --- /dev/null +++ b/drivers/net/atl1c/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_ATL1C) += atl1c.o +atl1c-objs := atl1c_main.o atl1c_hw.o atl1c_ethtool.o diff --git a/drivers/net/atl1c/atl1c.h b/drivers/net/atl1c/atl1c.h new file mode 100644 index 000000000000..ac11b84b8377 --- /dev/null +++ b/drivers/net/atl1c/atl1c.h @@ -0,0 +1,606 @@ +/* + * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _ATL1C_H_ +#define _ATL1C_H_ + +#include <linux/version.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/ipv6.h> +#include <linux/udp.h> +#include <linux/mii.h> +#include <linux/io.h> +#include <linux/vmalloc.h> +#include <linux/pagemap.h> +#include <linux/tcp.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/if_vlan.h> +#include <linux/workqueue.h> +#include <net/checksum.h> +#include <net/ip6_checksum.h> + +#include "atl1c_hw.h" + +/* Wake Up Filter Control */ +#define AT_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ +#define AT_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ +#define AT_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ +#define AT_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */ +#define AT_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ + +#define AT_VLAN_TO_TAG(_vlan, _tag) \ + _tag = ((((_vlan) >> 8) & 0xFF) |\ + (((_vlan) & 0xFF) << 8)) + +#define AT_TAG_TO_VLAN(_tag, _vlan) \ + _vlan = ((((_tag) >> 8) & 0xFF) |\ + (((_tag) & 0xFF) << 8)) + +#define SPEED_0 0xffff +#define HALF_DUPLEX 1 +#define FULL_DUPLEX 2 + +#define AT_RX_BUF_SIZE (ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN) +#define MAX_JUMBO_FRAME_SIZE (9*1024) +#define MAX_TX_OFFLOAD_THRESH (9*1024) + +#define AT_MAX_RECEIVE_QUEUE 4 +#define AT_DEF_RECEIVE_QUEUE 1 +#define AT_MAX_TRANSMIT_QUEUE 2 + +#define AT_DMA_HI_ADDR_MASK 0xffffffff00000000ULL +#define AT_DMA_LO_ADDR_MASK 0x00000000ffffffffULL + +#define AT_TX_WATCHDOG (5 * HZ) +#define AT_MAX_INT_WORK 5 +#define AT_TWSI_EEPROM_TIMEOUT 100 +#define AT_HW_MAX_IDLE_DELAY 10 +#define AT_SUSPEND_LINK_TIMEOUT 28 + +#define AT_ASPM_L0S_TIMER 6 +#define AT_ASPM_L1_TIMER 12 + +#define ATL1C_PCIE_L0S_L1_DISABLE 0x01 +#define ATL1C_PCIE_PHY_RESET 0x02 + +#define ATL1C_ASPM_L0s_ENABLE 0x0001 +#define ATL1C_ASPM_L1_ENABLE 0x0002 + +#define AT_REGS_LEN (75 * sizeof(u32)) +#define AT_EEPROM_LEN 512 + +#define ATL1C_GET_DESC(R, i, type) (&(((type *)((R)->desc))[i])) +#define ATL1C_RFD_DESC(R, i) ATL1C_GET_DESC(R, i, struct atl1c_rx_free_desc) +#define ATL1C_TPD_DESC(R, i) ATL1C_GET_DESC(R, i, struct atl1c_tpd_desc) +#define ATL1C_RRD_DESC(R, i) ATL1C_GET_DESC(R, i, struct atl1c_recv_ret_status) + +/* tpd word 1 bit 0:7 General Checksum task offload */ +#define TPD_L4HDR_OFFSET_MASK 0x00FF +#define TPD_L4HDR_OFFSET_SHIFT 0 + +/* tpd word 1 bit 0:7 Large Send task offload (IPv4/IPV6) */ +#define TPD_TCPHDR_OFFSET_MASK 0x00FF +#define TPD_TCPHDR_OFFSET_SHIFT 0 + +/* tpd word 1 bit 0:7 Custom Checksum task offload */ +#define TPD_PLOADOFFSET_MASK 0x00FF +#define TPD_PLOADOFFSET_SHIFT 0 + +/* tpd word 1 bit 8:17 */ +#define TPD_CCSUM_EN_MASK 0x0001 +#define TPD_CCSUM_EN_SHIFT 8 +#define TPD_IP_CSUM_MASK 0x0001 +#define TPD_IP_CSUM_SHIFT 9 +#define TPD_TCP_CSUM_MASK 0x0001 +#define TPD_TCP_CSUM_SHIFT 10 +#define TPD_UDP_CSUM_MASK 0x0001 +#define TPD_UDP_CSUM_SHIFT 11 +#define TPD_LSO_EN_MASK 0x0001 /* TCP Large Send Offload */ +#define TPD_LSO_EN_SHIFT 12 +#define TPD_LSO_VER_MASK 0x0001 +#define TPD_LSO_VER_SHIFT 13 /* 0 : ipv4; 1 : ipv4/ipv6 */ +#define TPD_CON_VTAG_MASK 0x0001 +#define TPD_CON_VTAG_SHIFT 14 +#define TPD_INS_VTAG_MASK 0x0001 +#define TPD_INS_VTAG_SHIFT 15 +#define TPD_IPV4_PACKET_MASK 0x0001 /* valid when LSO VER is 1 */ +#define TPD_IPV4_PACKET_SHIFT 16 +#define TPD_ETH_TYPE_MASK 0x0001 +#define TPD_ETH_TYPE_SHIFT 17 /* 0 : 802.3 frame; 1 : Ethernet */ + +/* tpd word 18:25 Custom Checksum task offload */ +#define TPD_CCSUM_OFFSET_MASK 0x00FF +#define TPD_CCSUM_OFFSET_SHIFT 18 +#define TPD_CCSUM_EPAD_MASK 0x0001 +#define TPD_CCSUM_EPAD_SHIFT 30 + +/* tpd word 18:30 Large Send task offload (IPv4/IPV6) */ +#define TPD_MSS_MASK 0x1FFF +#define TPD_MSS_SHIFT 18 + +#define TPD_EOP_MASK 0x0001 +#define TPD_EOP_SHIFT 31 + +struct atl1c_tpd_desc { + __le16 buffer_len; /* include 4-byte CRC */ + __le16 vlan_tag; + __le32 word1; + __le64 buffer_addr; +}; + +struct atl1c_tpd_ext_desc { + u32 reservd_0; + __le32 word1; + __le32 pkt_len; + u32 reservd_1; +}; +/* rrs word 0 bit 0:31 */ +#define RRS_RX_CSUM_MASK 0xFFFF +#define RRS_RX_CSUM_SHIFT 0 +#define RRS_RX_RFD_CNT_MASK 0x000F +#define RRS_RX_RFD_CNT_SHIFT 16 +#define RRS_RX_RFD_INDEX_MASK 0x0FFF +#define RRS_RX_RFD_INDEX_SHIFT 20 + +/* rrs flag bit 0:16 */ +#define RRS_HEAD_LEN_MASK 0x00FF +#define RRS_HEAD_LEN_SHIFT 0 +#define RRS_HDS_TYPE_MASK 0x0003 +#define RRS_HDS_TYPE_SHIFT 8 +#define RRS_CPU_NUM_MASK 0x0003 +#define RRS_CPU_NUM_SHIFT 10 +#define RRS_HASH_FLG_MASK 0x000F +#define RRS_HASH_FLG_SHIFT 12 + +#define RRS_HDS_TYPE_HEAD 1 +#define RRS_HDS_TYPE_DATA 2 + +#define RRS_IS_NO_HDS_TYPE(flag) \ + (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == 0) + +#define RRS_IS_HDS_HEAD(flag) \ + (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \ + RRS_HDS_TYPE_HEAD) + +#define RRS_IS_HDS_DATA(flag) \ + (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \ + RRS_HDS_TYPE_DATA) + +/* rrs word 3 bit 0:31 */ +#define RRS_PKT_SIZE_MASK 0x3FFF +#define RRS_PKT_SIZE_SHIFT 0 +#define RRS_ERR_L4_CSUM_MASK 0x0001 +#define RRS_ERR_L4_CSUM_SHIFT 14 +#define RRS_ERR_IP_CSUM_MASK 0x0001 +#define RRS_ERR_IP_CSUM_SHIFT 15 +#define RRS_VLAN_INS_MASK 0x0001 +#define RRS_VLAN_INS_SHIFT 16 +#define RRS_PROT_ID_MASK 0x0007 +#define RRS_PROT_ID_SHIFT 17 +#define RRS_RX_ERR_SUM_MASK 0x0001 +#define RRS_RX_ERR_SUM_SHIFT 20 +#define RRS_RX_ERR_CRC_MASK 0x0001 +#define RRS_RX_ERR_CRC_SHIFT 21 +#define RRS_RX_ERR_FAE_MASK 0x0001 +#define RRS_RX_ERR_FAE_SHIFT 22 +#define RRS_RX_ERR_TRUNC_MASK 0x0001 +#define RRS_RX_ERR_TRUNC_SHIFT 23 +#define RRS_RX_ERR_RUNC_MASK 0x0001 +#define RRS_RX_ERR_RUNC_SHIFT 24 +#define RRS_RX_ERR_ICMP_MASK 0x0001 +#define RRS_RX_ERR_ICMP_SHIFT 25 +#define RRS_PACKET_BCAST_MASK 0x0001 +#define RRS_PACKET_BCAST_SHIFT 26 +#define RRS_PACKET_MCAST_MASK 0x0001 +#define RRS_PACKET_MCAST_SHIFT 27 +#define RRS_PACKET_TYPE_MASK 0x0001 +#define RRS_PACKET_TYPE_SHIFT 28 +#define RRS_FIFO_FULL_MASK 0x0001 +#define RRS_FIFO_FULL_SHIFT 29 +#define RRS_802_3_LEN_ERR_MASK 0x0001 +#define RRS_802_3_LEN_ERR_SHIFT 30 +#define RRS_RXD_UPDATED_MASK 0x0001 +#define RRS_RXD_UPDATED_SHIFT 31 + +#define RRS_ERR_L4_CSUM 0x00004000 +#define RRS_ERR_IP_CSUM 0x00008000 +#define RRS_VLAN_INS 0x00010000 +#define RRS_RX_ERR_SUM 0x00100000 +#define RRS_RX_ERR_CRC 0x00200000 +#define RRS_802_3_LEN_ERR 0x40000000 +#define RRS_RXD_UPDATED 0x80000000 + +#define RRS_PACKET_TYPE_802_3 1 +#define RRS_PACKET_TYPE_ETH 0 +#define RRS_PACKET_IS_ETH(word) \ + (((word) >> RRS_PACKET_TYPE_SHIFT) & RRS_PACKET_TYPE_MASK == \ + RRS_PACKET_TYPE_ETH) +#define RRS_RXD_IS_VALID(word) \ + ((((word) >> RRS_RXD_UPDATED_SHIFT) & RRS_RXD_UPDATED_MASK) == 1) + +#define RRS_PACKET_PROT_IS_IPV4_ONLY(word) \ + ((((word) >> RRS_PROT_ID_SHIFT) & RRS_PROT_ID_MASK) == 1) +#define RRS_PACKET_PROT_IS_IPV6_ONLY(word) \ + ((((word) >> RRS_PROT_ID_SHIFT) & RRS_PROT_ID_MASK) == 6) + +struct atl1c_recv_ret_status { + __le32 word0; + __le32 rss_hash; + __le16 vlan_tag; + __le16 flag; + __le32 word3; +}; + +/* RFD desciptor */ +struct atl1c_rx_free_desc { + __le64 buffer_addr; +}; + +/* DMA Order Settings */ +enum atl1c_dma_order { + atl1c_dma_ord_in = 1, + atl1c_dma_ord_enh = 2, + atl1c_dma_ord_out = 4 +}; + +enum atl1c_dma_rcb { + atl1c_rcb_64 = 0, + atl1c_rcb_128 = 1 +}; + +enum atl1c_mac_speed { + atl1c_mac_speed_0 = 0, + atl1c_mac_speed_10_100 = 1, + atl1c_mac_speed_1000 = 2 +}; + +enum atl1c_dma_req_block { + atl1c_dma_req_128 = 0, + atl1c_dma_req_256 = 1, + atl1c_dma_req_512 = 2, + atl1c_dma_req_1024 = 3, + atl1c_dma_req_2048 = 4, + atl1c_dma_req_4096 = 5 +}; + +enum atl1c_rss_mode { + atl1c_rss_mode_disable = 0, + atl1c_rss_sig_que = 1, + atl1c_rss_mul_que_sig_int = 2, + atl1c_rss_mul_que_mul_int = 4, +}; + +enum atl1c_rss_type { + atl1c_rss_disable = 0, + atl1c_rss_ipv4 = 1, + atl1c_rss_ipv4_tcp = 2, + atl1c_rss_ipv6 = 4, + atl1c_rss_ipv6_tcp = 8 +}; + +enum atl1c_nic_type { + athr_l1c = 0, + athr_l2c = 1, +}; + +enum atl1c_trans_queue { + atl1c_trans_normal = 0, + atl1c_trans_high = 1 +}; + +struct atl1c_hw_stats { + /* rx */ + unsigned long rx_ok; /* The number of good packet received. */ + unsigned long rx_bcast; /* The number of good broadcast packet received. */ + unsigned long rx_mcast; /* The number of good multicast packet received. */ + unsigned long rx_pause; /* The number of Pause packet received. */ + unsigned long rx_ctrl; /* The number of Control packet received other than Pause frame. */ + unsigned long rx_fcs_err; /* The number of packets with bad FCS. */ + unsigned long rx_len_err; /* The number of packets with mismatch of length field and actual size. */ + unsigned long rx_byte_cnt; /* The number of bytes of good packet received. FCS is NOT included. */ + unsigned long rx_runt; /* The number of packets received that are less than 64 byte long and with good FCS. */ + unsigned long rx_frag; /* The number of packets received that are less than 64 byte long and with bad FCS. */ + unsigned long rx_sz_64; /* The number of good and bad packets received that are 64 byte long. */ + unsigned long rx_sz_65_127; /* The number of good and bad packets received that are between 65 and 127-byte long. */ + unsigned long rx_sz_128_255; /* The number of good and bad packets received that are between 128 and 255-byte long. */ + unsigned long rx_sz_256_511; /* The number of good and bad packets received that are between 256 and 511-byte long. */ + unsigned long rx_sz_512_1023; /* The number of good and bad packets received that are between 512 and 1023-byte long. */ + unsigned long rx_sz_1024_1518; /* The number of good and bad packets received that are between 1024 and 1518-byte long. */ + unsigned long rx_sz_1519_max; /* The number of good and bad packets received that are between 1519-byte and MTU. */ + unsigned long rx_sz_ov; /* The number of good and bad packets received that are more than MTU size truncated by Selene. */ + unsigned long rx_rxf_ov; /* The number of frame dropped due to occurrence of RX FIFO overflow. */ + unsigned long rx_rrd_ov; /* The number of frame dropped due to occurrence of RRD overflow. */ + unsigned long rx_align_err; /* Alignment Error */ + unsigned long rx_bcast_byte_cnt; /* The byte count of broadcast packet received, excluding FCS. */ + unsigned long rx_mcast_byte_cnt; /* The byte count of multicast packet received, excluding FCS. */ + unsigned long rx_err_addr; /* The number of packets dropped due to address filtering. */ + + /* tx */ + unsigned long tx_ok; /* The number of good packet transmitted. */ + unsigned long tx_bcast; /* The number of good broadcast packet transmitted. */ + unsigned long tx_mcast; /* The number of good multicast packet transmitted. */ + unsigned long tx_pause; /* The number of Pause packet transmitted. */ + unsigned long tx_exc_defer; /* The number of packets transmitted with excessive deferral. */ + unsigned long tx_ctrl; /* The number of packets transmitted is a control frame, excluding Pause frame. */ + unsigned long tx_defer; /* The number of packets transmitted that is deferred. */ + unsigned long tx_byte_cnt; /* The number of bytes of data transmitted. FCS is NOT included. */ + unsigned long tx_sz_64; /* The number of good and bad packets transmitted that are 64 byte long. */ + unsigned long tx_sz_65_127; /* The number of good and bad packets transmitted that are between 65 and 127-byte long. */ + unsigned long tx_sz_128_255; /* The number of good and bad packets transmitted that are between 128 and 255-byte long. */ + unsigned long tx_sz_256_511; /* The number of good and bad packets transmitted that are between 256 and 511-byte long. */ + unsigned long tx_sz_512_1023; /* The number of good and bad packets transmitted that are between 512 and 1023-byte long. */ + unsigned long tx_sz_1024_1518; /* The number of good and bad packets transmitted that are between 1024 and 1518-byte long. */ + unsigned long tx_sz_1519_max; /* The number of good and bad packets transmitted that are between 1519-byte and MTU. */ + unsigned long tx_1_col; /* The number of packets subsequently transmitted successfully with a single prior collision. */ + unsigned long tx_2_col; /* The number of packets subsequently transmitted successfully with multiple prior collisions. */ + unsigned long tx_late_col; /* The number of packets transmitted with late collisions. */ + unsigned long tx_abort_col; /* The number of transmit packets aborted due to excessive collisions. */ + unsigned long tx_underrun; /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */ + unsigned long tx_rd_eop; /* The number of times that read beyond the EOP into the next frame area when TRD was not written timely */ + unsigned long tx_len_err; /* The number of transmit packets with length field does NOT match the actual frame size. */ + unsigned long tx_trunc; /* The number of transmit packets truncated due to size exceeding MTU. */ + unsigned long tx_bcast_byte; /* The byte count of broadcast packet transmitted, excluding FCS. */ + unsigned long tx_mcast_byte; /* The byte count of multicast packet transmitted, excluding FCS. */ +}; + +struct atl1c_hw { + u8 __iomem *hw_addr; /* inner register address */ + struct atl1c_adapter *adapter; + enum atl1c_nic_type nic_type; + enum atl1c_dma_order dma_order; + enum atl1c_dma_rcb rcb_value; + enum atl1c_dma_req_block dmar_block; + enum atl1c_dma_req_block dmaw_block; + + u16 device_id; + u16 vendor_id; + u16 subsystem_id; + u16 subsystem_vendor_id; + u8 revision_id; + + u32 intr_mask; + u8 dmaw_dly_cnt; + u8 dmar_dly_cnt; + + u8 preamble_len; + u16 max_frame_size; + u16 min_frame_size; + + enum atl1c_mac_speed mac_speed; + bool mac_duplex; + bool hibernate; + u16 media_type; +#define MEDIA_TYPE_AUTO_SENSOR 0 +#define MEDIA_TYPE_100M_FULL 1 +#define MEDIA_TYPE_100M_HALF 2 +#define MEDIA_TYPE_10M_FULL 3 +#define MEDIA_TYPE_10M_HALF 4 + + u16 autoneg_advertised; + u16 mii_autoneg_adv_reg; + u16 mii_1000t_ctrl_reg; + + u16 tx_imt; /* TX Interrupt Moderator timer ( 2us resolution) */ + u16 rx_imt; /* RX Interrupt Moderator timer ( 2us resolution) */ + u16 ict; /* Interrupt Clear timer (2us resolution) */ + u16 ctrl_flags; +#define ATL1C_INTR_CLEAR_ON_READ 0x0001 +#define ATL1C_INTR_MODRT_ENABLE 0x0002 +#define ATL1C_CMB_ENABLE 0x0004 +#define ATL1C_SMB_ENABLE 0x0010 +#define ATL1C_TXQ_MODE_ENHANCE 0x0020 +#define ATL1C_RX_IPV6_CHKSUM 0x0040 +#define ATL1C_ASPM_L0S_SUPPORT 0x0080 +#define ATL1C_ASPM_L1_SUPPORT 0x0100 +#define ATL1C_ASPM_CTRL_MON 0x0200 +#define ATL1C_HIB_DISABLE 0x0400 +#define ATL1C_LINK_CAP_1000M 0x0800 +#define ATL1C_FPGA_VERSION 0x8000 + u16 cmb_tpd; + u16 cmb_rrd; + u16 cmb_rx_timer; /* 2us resolution */ + u16 cmb_tx_timer; + u32 smb_timer; + + u16 rrd_thresh; /* Threshold of number of RRD produced to trigger + interrupt request */ + u16 tpd_thresh; + u8 tpd_burst; /* Number of TPD to prefetch in cache-aligned burst. */ + u8 rfd_burst; + enum atl1c_rss_type rss_type; + enum atl1c_rss_mode rss_mode; + u8 rss_hash_bits; + u32 base_cpu; + u32 indirect_tab; + u8 mac_addr[ETH_ALEN]; + u8 perm_mac_addr[ETH_ALEN]; + + bool phy_configured; + bool re_autoneg; + bool emi_ca; +}; + +/* + * atl1c_ring_header represents a single, contiguous block of DMA space + * mapped for the three descriptor rings (tpd, rfd, rrd) and the two + * message blocks (cmb, smb) described below + */ +struct atl1c_ring_header { + void *desc; /* virtual address */ + dma_addr_t dma; /* physical address*/ + unsigned int size; /* length in bytes */ +}; + +/* + * atl1c_buffer is wrapper around a pointer to a socket buffer + * so a DMA handle can be stored along with the skb + */ +struct atl1c_buffer { + struct sk_buff *skb; /* socket buffer */ + u16 length; /* rx buffer length */ + u16 state; /* state of buffer */ +#define ATL1_BUFFER_FREE 0 +#define ATL1_BUFFER_BUSY 1 + dma_addr_t dma; +}; + +/* transimit packet descriptor (tpd) ring */ +struct atl1c_tpd_ring { + void *desc; /* descriptor ring virtual address */ + dma_addr_t dma; /* descriptor ring physical address */ + u16 size; /* descriptor ring length in bytes */ + u16 count; /* number of descriptors in the ring */ + u16 next_to_use; /* this is protectd by adapter->tx_lock */ + atomic_t next_to_clean; + struct atl1c_buffer *buffer_info; +}; + +/* receive free descriptor (rfd) ring */ +struct atl1c_rfd_ring { + void *desc; /* descriptor ring virtual address */ + dma_addr_t dma; /* descriptor ring physical address */ + u16 size; /* descriptor ring length in bytes */ + u16 count; /* number of descriptors in the ring */ + u16 next_to_use; + u16 next_to_clean; + struct atl1c_buffer *buffer_info; +}; + +/* receive return desciptor (rrd) ring */ +struct atl1c_rrd_ring { + void *desc; /* descriptor ring virtual address */ + dma_addr_t dma; /* descriptor ring physical address */ + u16 size; /* descriptor ring length in bytes */ + u16 count; /* number of descriptors in the ring */ + u16 next_to_use; + u16 next_to_clean; +}; + +struct atl1c_cmb { + void *cmb; + dma_addr_t dma; +}; + +struct atl1c_smb { + void *smb; + dma_addr_t dma; +}; + +/* board specific private data structure */ +struct atl1c_adapter { + struct net_device *netdev; + struct pci_dev *pdev; + struct vlan_group *vlgrp; + struct napi_struct napi; + struct atl1c_hw hw; + struct atl1c_hw_stats hw_stats; + struct net_device_stats net_stats; + struct mii_if_info mii; /* MII interface info */ + u16 rx_buffer_len; + + unsigned long flags; +#define __AT_TESTING 0x0001 +#define __AT_RESETTING 0x0002 +#define __AT_DOWN 0x0003 + u32 msg_enable; + + bool have_msi; + u32 wol; + u16 link_speed; + u16 link_duplex; + + spinlock_t mdio_lock; + spinlock_t tx_lock; + atomic_t irq_sem; + + struct work_struct reset_task; + struct work_struct link_chg_task; + struct timer_list watchdog_timer; + struct timer_list phy_config_timer; + + /* All Descriptor memory */ + struct atl1c_ring_header ring_header; + struct atl1c_tpd_ring tpd_ring[AT_MAX_TRANSMIT_QUEUE]; + struct atl1c_rfd_ring rfd_ring[AT_MAX_RECEIVE_QUEUE]; + struct atl1c_rrd_ring rrd_ring[AT_MAX_RECEIVE_QUEUE]; + struct atl1c_cmb cmb; + struct atl1c_smb smb; + int num_rx_queues; + u32 bd_number; /* board number;*/ +}; + +#define AT_WRITE_REG(a, reg, value) ( \ + writel((value), ((a)->hw_addr + reg))) + +#define AT_WRITE_FLUSH(a) (\ + readl((a)->hw_addr)) + +#define AT_READ_REG(a, reg, pdata) do { \ + if (unlikely((a)->hibernate)) { \ + readl((a)->hw_addr + reg); \ + *(u32 *)pdata = readl((a)->hw_addr + reg); \ + } else { \ + *(u32 *)pdata = readl((a)->hw_addr + reg); \ + } \ + } while (0) + +#define AT_WRITE_REGB(a, reg, value) (\ + writeb((value), ((a)->hw_addr + reg))) + +#define AT_READ_REGB(a, reg) (\ + readb((a)->hw_addr + reg)) + +#define AT_WRITE_REGW(a, reg, value) (\ + writew((value), ((a)->hw_addr + reg))) + +#define AT_READ_REGW(a, reg) (\ + readw((a)->hw_addr + reg)) + +#define AT_WRITE_REG_ARRAY(a, reg, offset, value) ( \ + writel((value), (((a)->hw_addr + reg) + ((offset) << 2)))) + +#define AT_READ_REG_ARRAY(a, reg, offset) ( \ + readl(((a)->hw_addr + reg) + ((offset) << 2))) + +extern char atl1c_driver_name[]; +extern char atl1c_driver_version[]; + +extern int atl1c_up(struct atl1c_adapter *adapter); +extern void atl1c_down(struct atl1c_adapter *adapter); +extern void atl1c_reinit_locked(struct atl1c_adapter *adapter); +extern s32 atl1c_reset_hw(struct atl1c_hw *hw); +extern void atl1c_set_ethtool_ops(struct net_device *netdev); +#endif /* _ATL1C_H_ */ diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/atl1c/atl1c_ethtool.c new file mode 100644 index 000000000000..45c5b7332cd3 --- /dev/null +++ b/drivers/net/atl1c/atl1c_ethtool.c @@ -0,0 +1,317 @@ +/* + * Copyright(c) 2009 - 2009 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <linux/netdevice.h> +#include <linux/ethtool.h> + +#include "atl1c.h" + +static int atl1c_get_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct atl1c_hw *hw = &adapter->hw; + + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_TP); + if (hw->ctrl_flags & ATL1C_LINK_CAP_1000M) + ecmd->supported |= SUPPORTED_1000baseT_Full; + + ecmd->advertising = ADVERTISED_TP; + + ecmd->advertising |= hw->autoneg_advertised; + + ecmd->port = PORT_TP; + ecmd->phy_address = 0; + ecmd->transceiver = XCVR_INTERNAL; + + if (adapter->link_speed != SPEED_0) { + ecmd->speed = adapter->link_speed; + if (adapter->link_duplex == FULL_DUPLEX) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + ecmd->autoneg = AUTONEG_ENABLE; + return 0; +} + +static int atl1c_set_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct atl1c_hw *hw = &adapter->hw; + u16 autoneg_advertised; + + while (test_and_set_bit(__AT_RESETTING, &adapter->flags)) + msleep(1); + + if (ecmd->autoneg == AUTONEG_ENABLE) { + autoneg_advertised = ADVERTISED_Autoneg; + } else { + if (ecmd->speed == SPEED_1000) { + if (ecmd->duplex != DUPLEX_FULL) { + if (netif_msg_link(adapter)) + dev_warn(&adapter->pdev->dev, + "1000M half is invalid\n"); + clear_bit(__AT_RESETTING, &adapter->flags); + return -EINVAL; + } + autoneg_advertised = ADVERTISED_1000baseT_Full; + } else if (ecmd->speed == SPEED_100) { + if (ecmd->duplex == DUPLEX_FULL) + autoneg_advertised = ADVERTISED_100baseT_Full; + else + autoneg_advertised = ADVERTISED_100baseT_Half; + } else { + if (ecmd->duplex == DUPLEX_FULL) + autoneg_advertised = ADVERTISED_10baseT_Full; + else + autoneg_advertised = ADVERTISED_10baseT_Half; + } + } + + if (hw->autoneg_advertised != autoneg_advertised) { + hw->autoneg_advertised = autoneg_advertised; + if (atl1c_restart_autoneg(hw) != 0) { + if (netif_msg_link(adapter)) + dev_warn(&adapter->pdev->dev, + "ethtool speed/duplex setting failed\n"); + clear_bit(__AT_RESETTING, &adapter->flags); + return -EINVAL; + } + } + clear_bit(__AT_RESETTING, &adapter->flags); + return 0; +} + +static u32 atl1c_get_tx_csum(struct net_device *netdev) +{ + return (netdev->features & NETIF_F_HW_CSUM) != 0; +} + +static u32 atl1c_get_msglevel(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + return adapter->msg_enable; +} + +static void atl1c_set_msglevel(struct net_device *netdev, u32 data) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + adapter->msg_enable = data; +} + +static int atl1c_get_regs_len(struct net_device *netdev) +{ + return AT_REGS_LEN; +} + +static void atl1c_get_regs(struct net_device *netdev, + struct ethtool_regs *regs, void *p) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct atl1c_hw *hw = &adapter->hw; + u32 *regs_buff = p; + u16 phy_data; + + memset(p, 0, AT_REGS_LEN); + + regs->version = 0; + AT_READ_REG(hw, REG_VPD_CAP, p++); + AT_READ_REG(hw, REG_PM_CTRL, p++); + AT_READ_REG(hw, REG_MAC_HALF_DUPLX_CTRL, p++); + AT_READ_REG(hw, REG_TWSI_CTRL, p++); + AT_READ_REG(hw, REG_PCIE_DEV_MISC_CTRL, p++); + AT_READ_REG(hw, REG_MASTER_CTRL, p++); + AT_READ_REG(hw, REG_MANUAL_TIMER_INIT, p++); + AT_READ_REG(hw, REG_IRQ_MODRT_TIMER_INIT, p++); + AT_READ_REG(hw, REG_GPHY_CTRL, p++); + AT_READ_REG(hw, REG_LINK_CTRL, p++); + AT_READ_REG(hw, REG_IDLE_STATUS, p++); + AT_READ_REG(hw, REG_MDIO_CTRL, p++); + AT_READ_REG(hw, REG_SERDES_LOCK, p++); + AT_READ_REG(hw, REG_MAC_CTRL, p++); + AT_READ_REG(hw, REG_MAC_IPG_IFG, p++); + AT_READ_REG(hw, REG_MAC_STA_ADDR, p++); + AT_READ_REG(hw, REG_MAC_STA_ADDR+4, p++); + AT_READ_REG(hw, REG_RX_HASH_TABLE, p++); + AT_READ_REG(hw, REG_RX_HASH_TABLE+4, p++); + AT_READ_REG(hw, REG_RXQ_CTRL, p++); + AT_READ_REG(hw, REG_TXQ_CTRL, p++); + AT_READ_REG(hw, REG_MTU, p++); + AT_READ_REG(hw, REG_WOL_CTRL, p++); + + atl1c_read_phy_reg(hw, MII_BMCR, &phy_data); + regs_buff[73] = (u32) phy_data; + atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); + regs_buff[74] = (u32) phy_data; +} + +static int atl1c_get_eeprom_len(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + + if (atl1c_check_eeprom_exist(&adapter->hw)) + return AT_EEPROM_LEN; + else + return 0; +} + +static int atl1c_get_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct atl1c_hw *hw = &adapter->hw; + u32 *eeprom_buff; + int first_dword, last_dword; + int ret_val = 0; + int i; + + if (eeprom->len == 0) + return -EINVAL; + + if (!atl1c_check_eeprom_exist(hw)) /* not exist */ + return -EINVAL; + + eeprom->magic = adapter->pdev->vendor | + (adapter->pdev->device << 16); + + first_dword = eeprom->offset >> 2; + last_dword = (eeprom->offset + eeprom->len - 1) >> 2; + + eeprom_buff = kmalloc(sizeof(u32) * + (last_dword - first_dword + 1), GFP_KERNEL); + if (eeprom_buff == NULL) + return -ENOMEM; + + for (i = first_dword; i < last_dword; i++) { + if (!atl1c_read_eeprom(hw, i * 4, &(eeprom_buff[i-first_dword]))) { + kfree(eeprom_buff); + return -EIO; + } + } + + memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 3), + eeprom->len); + kfree(eeprom_buff); + + return ret_val; + return 0; +} + +static void atl1c_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + + strncpy(drvinfo->driver, atl1c_driver_name, sizeof(drvinfo->driver)); + strncpy(drvinfo->version, atl1c_driver_version, + sizeof(drvinfo->version)); + strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + strncpy(drvinfo->bus_info, pci_name(adapter->pdev), + sizeof(drvinfo->bus_info)); + drvinfo->n_stats = 0; + drvinfo->testinfo_len = 0; + drvinfo->regdump_len = atl1c_get_regs_len(netdev); + drvinfo->eedump_len = atl1c_get_eeprom_len(netdev); +} + +static void atl1c_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_MAGIC | WAKE_PHY; + wol->wolopts = 0; + + if (adapter->wol & AT_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & AT_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & AT_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & AT_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; + if (adapter->wol & AT_WUFC_LNKC) + wol->wolopts |= WAKE_PHY; + + return; +} + +static int atl1c_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + + if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE | + WAKE_MCAST | WAKE_BCAST | WAKE_MCAST)) + return -EOPNOTSUPP; + /* these settings will always override what we currently have */ + adapter->wol = 0; + + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= AT_WUFC_MAG; + if (wol->wolopts & WAKE_PHY) + adapter->wol |= AT_WUFC_LNKC; + + return 0; +} + +static int atl1c_nway_reset(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + if (netif_running(netdev)) + atl1c_reinit_locked(adapter); + return 0; +} + +static struct ethtool_ops atl1c_ethtool_ops = { + .get_settings = atl1c_get_settings, + .set_settings = atl1c_set_settings, + .get_drvinfo = atl1c_get_drvinfo, + .get_regs_len = atl1c_get_regs_len, + .get_regs = atl1c_get_regs, + .get_wol = atl1c_get_wol, + .set_wol = atl1c_set_wol, + .get_msglevel = atl1c_get_msglevel, + .set_msglevel = atl1c_set_msglevel, + .nway_reset = atl1c_nway_reset, + .get_link = ethtool_op_get_link, + .get_eeprom_len = atl1c_get_eeprom_len, + .get_eeprom = atl1c_get_eeprom, + .get_tx_csum = atl1c_get_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, +}; + +void atl1c_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &atl1c_ethtool_ops); +} diff --git a/drivers/net/atl1c/atl1c_hw.c b/drivers/net/atl1c/atl1c_hw.c new file mode 100644 index 000000000000..3e69b940b8f7 --- /dev/null +++ b/drivers/net/atl1c/atl1c_hw.c @@ -0,0 +1,527 @@ +/* + * Copyright(c) 2007 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/mii.h> +#include <linux/crc32.h> + +#include "atl1c.h" + +/* + * check_eeprom_exist + * return 1 if eeprom exist + */ +int atl1c_check_eeprom_exist(struct atl1c_hw *hw) +{ + u32 data; + + AT_READ_REG(hw, REG_TWSI_DEBUG, &data); + if (data & TWSI_DEBUG_DEV_EXIST) + return 1; + + return 0; +} + +void atl1c_hw_set_mac_addr(struct atl1c_hw *hw) +{ + u32 value; + /* + * 00-0B-6A-F6-00-DC + * 0: 6AF600DC 1: 000B + * low dword + */ + value = (((u32)hw->mac_addr[2]) << 24) | + (((u32)hw->mac_addr[3]) << 16) | + (((u32)hw->mac_addr[4]) << 8) | + (((u32)hw->mac_addr[5])) ; + AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value); + /* hight dword */ + value = (((u32)hw->mac_addr[0]) << 8) | + (((u32)hw->mac_addr[1])) ; + AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value); +} + +/* + * atl1c_get_permanent_address + * return 0 if get valid mac address, + */ +static int atl1c_get_permanent_address(struct atl1c_hw *hw) +{ + u32 addr[2]; + u32 i; + u32 otp_ctrl_data; + u32 twsi_ctrl_data; + u8 eth_addr[ETH_ALEN]; + + /* init */ + addr[0] = addr[1] = 0; + AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data); + if (atl1c_check_eeprom_exist(hw)) { + /* Enable OTP CLK */ + if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) { + otp_ctrl_data |= OTP_CTRL_CLK_EN; + AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data); + AT_WRITE_FLUSH(hw); + msleep(1); + } + + AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data); + twsi_ctrl_data |= TWSI_CTRL_SW_LDSTART; + AT_WRITE_REG(hw, REG_TWSI_CTRL, twsi_ctrl_data); + for (i = 0; i < AT_TWSI_EEPROM_TIMEOUT; i++) { + msleep(10); + AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data); + if ((twsi_ctrl_data & TWSI_CTRL_SW_LDSTART) == 0) + break; + } + if (i >= AT_TWSI_EEPROM_TIMEOUT) + return -1; + } + /* Disable OTP_CLK */ + if (otp_ctrl_data & OTP_CTRL_CLK_EN) { + otp_ctrl_data &= ~OTP_CTRL_CLK_EN; + AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data); + AT_WRITE_FLUSH(hw); + msleep(1); + } + + /* maybe MAC-address is from BIOS */ + AT_READ_REG(hw, REG_MAC_STA_ADDR, &addr[0]); + AT_READ_REG(hw, REG_MAC_STA_ADDR + 4, &addr[1]); + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *)&addr[1]); + + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } + + return -1; +} + +bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value) +{ + int i; + int ret = false; + u32 otp_ctrl_data; + u32 control; + u32 data; + + if (offset & 3) + return ret; /* address do not align */ + + AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data); + if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) + AT_WRITE_REG(hw, REG_OTP_CTRL, + (otp_ctrl_data | OTP_CTRL_CLK_EN)); + + AT_WRITE_REG(hw, REG_EEPROM_DATA_LO, 0); + control = (offset & EEPROM_CTRL_ADDR_MASK) << EEPROM_CTRL_ADDR_SHIFT; + AT_WRITE_REG(hw, REG_EEPROM_CTRL, control); + + for (i = 0; i < 10; i++) { + udelay(100); + AT_READ_REG(hw, REG_EEPROM_CTRL, &control); + if (control & EEPROM_CTRL_RW) + break; + } + if (control & EEPROM_CTRL_RW) { + AT_READ_REG(hw, REG_EEPROM_CTRL, &data); + AT_READ_REG(hw, REG_EEPROM_DATA_LO, p_value); + data = data & 0xFFFF; + *p_value = swab32((data << 16) | (*p_value >> 16)); + ret = true; + } + if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) + AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data); + + return ret; +} +/* + * Reads the adapter's MAC address from the EEPROM + * + * hw - Struct containing variables accessed by shared code + */ +int atl1c_read_mac_addr(struct atl1c_hw *hw) +{ + int err = 0; + + err = atl1c_get_permanent_address(hw); + if (err) + random_ether_addr(hw->perm_mac_addr); + + memcpy(hw->mac_addr, hw->perm_mac_addr, sizeof(hw->perm_mac_addr)); + return 0; +} + +/* + * atl1c_hash_mc_addr + * purpose + * set hash value for a multicast address + * hash calcu processing : + * 1. calcu 32bit CRC for multicast address + * 2. reverse crc with MSB to LSB + */ +u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr) +{ + u32 crc32; + u32 value = 0; + int i; + + crc32 = ether_crc_le(6, mc_addr); + for (i = 0; i < 32; i++) + value |= (((crc32 >> i) & 1) << (31 - i)); + + return value; +} + +/* + * Sets the bit in the multicast table corresponding to the hash value. + * hw - Struct containing variables accessed by shared code + * hash_value - Multicast address hash value + */ +void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value) +{ + u32 hash_bit, hash_reg; + u32 mta; + + /* + * The HASH Table is a register array of 2 32-bit registers. + * It is treated like an array of 64 bits. We want to set + * bit BitArray[hash_value]. So we figure out what register + * the bit is in, read it, OR in the new bit, then write + * back the new value. The register is determined by the + * upper bit of the hash value and the bit within that + * register are determined by the lower 5 bits of the value. + */ + hash_reg = (hash_value >> 31) & 0x1; + hash_bit = (hash_value >> 26) & 0x1F; + + mta = AT_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg); + + mta |= (1 << hash_bit); + + AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta); +} + +/* + * Reads the value from a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to read + */ +int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data) +{ + u32 val; + int i; + + val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | + MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | + MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; + + AT_WRITE_REG(hw, REG_MDIO_CTRL, val); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + AT_READ_REG(hw, REG_MDIO_CTRL, &val); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + if (!(val & (MDIO_START | MDIO_BUSY))) { + *phy_data = (u16)val; + return 0; + } + + return -1; +} + +/* + * Writes a value to a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to write + * data - data to write to the PHY + */ +int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data) +{ + int i; + u32 val; + + val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | + (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | + MDIO_SUP_PREAMBLE | MDIO_START | + MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; + + AT_WRITE_REG(hw, REG_MDIO_CTRL, val); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + AT_READ_REG(hw, REG_MDIO_CTRL, &val); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + + if (!(val & (MDIO_START | MDIO_BUSY))) + return 0; + + return -1; +} + +/* + * Configures PHY autoneg and flow control advertisement settings + * + * hw - Struct containing variables accessed by shared code + */ +static int atl1c_phy_setup_adv(struct atl1c_hw *hw) +{ + u16 mii_adv_data = ADVERTISE_DEFAULT_CAP & ~ADVERTISE_SPEED_MASK; + u16 mii_giga_ctrl_data = GIGA_CR_1000T_DEFAULT_CAP & + ~GIGA_CR_1000T_SPEED_MASK; + + if (hw->autoneg_advertised & ADVERTISED_10baseT_Half) + mii_adv_data |= ADVERTISE_10HALF; + if (hw->autoneg_advertised & ADVERTISED_10baseT_Full) + mii_adv_data |= ADVERTISE_10FULL; + if (hw->autoneg_advertised & ADVERTISED_100baseT_Half) + mii_adv_data |= ADVERTISE_100HALF; + if (hw->autoneg_advertised & ADVERTISED_100baseT_Full) + mii_adv_data |= ADVERTISE_100FULL; + + if (hw->autoneg_advertised & ADVERTISED_Autoneg) + mii_adv_data |= ADVERTISE_10HALF | ADVERTISE_10FULL | + ADVERTISE_100HALF | ADVERTISE_100FULL; + + if (hw->ctrl_flags & ATL1C_LINK_CAP_1000M) { + if (hw->autoneg_advertised & ADVERTISED_1000baseT_Half) + mii_giga_ctrl_data |= ADVERTISE_1000HALF; + if (hw->autoneg_advertised & ADVERTISED_1000baseT_Full) + mii_giga_ctrl_data |= ADVERTISE_1000FULL; + if (hw->autoneg_advertised & ADVERTISED_Autoneg) + mii_giga_ctrl_data |= ADVERTISE_1000HALF | + ADVERTISE_1000FULL; + } + + if (atl1c_write_phy_reg(hw, MII_ADVERTISE, mii_adv_data) != 0 || + atl1c_write_phy_reg(hw, MII_GIGA_CR, mii_giga_ctrl_data) != 0) + return -1; + return 0; +} + +void atl1c_phy_disable(struct atl1c_hw *hw) +{ + AT_WRITE_REGW(hw, REG_GPHY_CTRL, + GPHY_CTRL_PW_WOL_DIS | GPHY_CTRL_EXT_RESET); +} + +static void atl1c_phy_magic_data(struct atl1c_hw *hw) +{ + u16 data; + + data = ANA_LOOP_SEL_10BT | ANA_EN_MASK_TB | ANA_EN_10BT_IDLE | + ((1 & ANA_INTERVAL_SEL_TIMER_MASK) << + ANA_INTERVAL_SEL_TIMER_SHIFT); + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_18); + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + data = (2 & ANA_SERDES_CDR_BW_MASK) | ANA_MS_PAD_DBG | + ANA_SERDES_EN_DEEM | ANA_SERDES_SEL_HSP | ANA_SERDES_EN_PLL | + ANA_SERDES_EN_LCKDT; + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_5); + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + data = (44 & ANA_LONG_CABLE_TH_100_MASK) | + ((33 & ANA_SHORT_CABLE_TH_100_MASK) << + ANA_SHORT_CABLE_TH_100_SHIFT) | ANA_BP_BAD_LINK_ACCUM | + ANA_BP_SMALL_BW; + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_54); + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + data = (11 & ANA_IECHO_ADJ_MASK) | ((11 & ANA_IECHO_ADJ_MASK) << + ANA_IECHO_ADJ_2_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) << + ANA_IECHO_ADJ_1_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) << + ANA_IECHO_ADJ_0_SHIFT); + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_4); + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + data = ANA_RESTART_CAL | ((7 & ANA_MANUL_SWICH_ON_MASK) << + ANA_MANUL_SWICH_ON_SHIFT) | ANA_MAN_ENABLE | + ANA_SEL_HSP | ANA_EN_HB | ANA_OEN_125M; + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_0); + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + if (hw->ctrl_flags & ATL1C_HIB_DISABLE) { + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_41); + if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0) + return; + data &= ~ANA_TOP_PS_EN; + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + + atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_11); + if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0) + return; + data &= ~ANA_PS_HIB_EN; + atl1c_write_phy_reg(hw, MII_DBG_DATA, data); + } +} + +int atl1c_phy_reset(struct atl1c_hw *hw) +{ + struct atl1c_adapter *adapter = hw->adapter; + struct pci_dev *pdev = adapter->pdev; + u32 phy_ctrl_data = GPHY_CTRL_DEFAULT; + u32 mii_ier_data = IER_LINK_UP | IER_LINK_DOWN; + int err; + + if (hw->ctrl_flags & ATL1C_HIB_DISABLE) + phy_ctrl_data &= ~GPHY_CTRL_HIB_EN; + + AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data); + AT_WRITE_FLUSH(hw); + msleep(40); + phy_ctrl_data |= GPHY_CTRL_EXT_RESET; + AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data); + AT_WRITE_FLUSH(hw); + msleep(10); + + /*Enable PHY LinkChange Interrupt */ + err = atl1c_write_phy_reg(hw, MII_IER, mii_ier_data); + if (err) { + if (netif_msg_hw(adapter)) + dev_err(&pdev->dev, + "Error enable PHY linkChange Interrupt\n"); + return err; + } + if (!(hw->ctrl_flags & ATL1C_FPGA_VERSION)) + atl1c_phy_magic_data(hw); + return 0; +} + +int atl1c_phy_init(struct atl1c_hw *hw) +{ + struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter; + struct pci_dev *pdev = adapter->pdev; + int ret_val; + u16 mii_bmcr_data = BMCR_RESET; + u16 phy_id1, phy_id2; + + if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &phy_id1) != 0) || + (atl1c_read_phy_reg(hw, MII_PHYSID2, &phy_id2) != 0)) { + if (netif_msg_link(adapter)) + dev_err(&pdev->dev, "Error get phy ID\n"); + return -1; + } + switch (hw->media_type) { + case MEDIA_TYPE_AUTO_SENSOR: + ret_val = atl1c_phy_setup_adv(hw); + if (ret_val) { + if (netif_msg_link(adapter)) + dev_err(&pdev->dev, + "Error Setting up Auto-Negotiation\n"); + return ret_val; + } + mii_bmcr_data |= BMCR_AUTO_NEG_EN | BMCR_RESTART_AUTO_NEG; + break; + case MEDIA_TYPE_100M_FULL: + mii_bmcr_data |= BMCR_SPEED_100 | BMCR_FULL_DUPLEX; + break; + case MEDIA_TYPE_100M_HALF: + mii_bmcr_data |= BMCR_SPEED_100; + break; + case MEDIA_TYPE_10M_FULL: + mii_bmcr_data |= BMCR_SPEED_10 | BMCR_FULL_DUPLEX; + break; + case MEDIA_TYPE_10M_HALF: + mii_bmcr_data |= BMCR_SPEED_10; + break; + default: + if (netif_msg_link(adapter)) + dev_err(&pdev->dev, "Wrong Media type %d\n", + hw->media_type); + return -1; + break; + } + + ret_val = atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data); + if (ret_val) + return ret_val; + hw->phy_configured = true; + + return 0; +} + +/* + * Detects the current speed and duplex settings of the hardware. + * + * hw - Struct containing variables accessed by shared code + * speed - Speed of the connection + * duplex - Duplex setting of the connection + */ +int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex) +{ + int err; + u16 phy_data; + + /* Read PHY Specific Status Register (17) */ + err = atl1c_read_phy_reg(hw, MII_GIGA_PSSR, &phy_data); + if (err) + return err; + + if (!(phy_data & GIGA_PSSR_SPD_DPLX_RESOLVED)) + return -1; + + switch (phy_data & GIGA_PSSR_SPEED) { + case GIGA_PSSR_1000MBS: + *speed = SPEED_1000; + break; + case GIGA_PSSR_100MBS: + *speed = SPEED_100; + break; + case GIGA_PSSR_10MBS: + *speed = SPEED_10; + break; + default: + return -1; + break; + } + + if (phy_data & GIGA_PSSR_DPLX) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + return 0; +} + +int atl1c_restart_autoneg(struct atl1c_hw *hw) +{ + int err = 0; + u16 mii_bmcr_data = BMCR_RESET; + + err = atl1c_phy_setup_adv(hw); + if (err) + return err; + mii_bmcr_data |= BMCR_AUTO_NEG_EN | BMCR_RESTART_AUTO_NEG; + + return atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data); +} diff --git a/drivers/net/atl1c/atl1c_hw.h b/drivers/net/atl1c/atl1c_hw.h new file mode 100644 index 000000000000..c2c738df5c63 --- /dev/null +++ b/drivers/net/atl1c/atl1c_hw.h @@ -0,0 +1,859 @@ +/* + * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _ATL1C_HW_H_ +#define _ATL1C_HW_H_ + +#include <linux/types.h> +#include <linux/mii.h> + +struct atl1c_adapter; +struct atl1c_hw; + +/* function prototype */ +void atl1c_phy_disable(struct atl1c_hw *hw); +void atl1c_hw_set_mac_addr(struct atl1c_hw *hw); +int atl1c_phy_reset(struct atl1c_hw *hw); +int atl1c_read_mac_addr(struct atl1c_hw *hw); +int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex); +u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr); +void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value); +int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data); +int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data); +bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value); +int atl1c_phy_init(struct atl1c_hw *hw); +int atl1c_check_eeprom_exist(struct atl1c_hw *hw); +int atl1c_restart_autoneg(struct atl1c_hw *hw); + +/* register definition */ +#define REG_DEVICE_CAP 0x5C +#define DEVICE_CAP_MAX_PAYLOAD_MASK 0x7 +#define DEVICE_CAP_MAX_PAYLOAD_SHIFT 0 + +#define REG_DEVICE_CTRL 0x60 +#define DEVICE_CTRL_MAX_PAYLOAD_MASK 0x7 +#define DEVICE_CTRL_MAX_PAYLOAD_SHIFT 5 +#define DEVICE_CTRL_MAX_RREQ_SZ_MASK 0x7 +#define DEVICE_CTRL_MAX_RREQ_SZ_SHIFT 12 + +#define REG_LINK_CTRL 0x68 +#define LINK_CTRL_L0S_EN 0x01 +#define LINK_CTRL_L1_EN 0x02 + +#define REG_VPD_CAP 0x6C +#define VPD_CAP_ID_MASK 0xff +#define VPD_CAP_ID_SHIFT 0 +#define VPD_CAP_NEXT_PTR_MASK 0xFF +#define VPD_CAP_NEXT_PTR_SHIFT 8 +#define VPD_CAP_VPD_ADDR_MASK 0x7FFF +#define VPD_CAP_VPD_ADDR_SHIFT 16 +#define VPD_CAP_VPD_FLAG 0x80000000 + +#define REG_VPD_DATA 0x70 + +#define REG_PCIE_UC_SEVERITY 0x10C +#define PCIE_UC_SERVRITY_TRN 0x00000001 +#define PCIE_UC_SERVRITY_DLP 0x00000010 +#define PCIE_UC_SERVRITY_PSN_TLP 0x00001000 +#define PCIE_UC_SERVRITY_FCP 0x00002000 +#define PCIE_UC_SERVRITY_CPL_TO 0x00004000 +#define PCIE_UC_SERVRITY_CA 0x00008000 +#define PCIE_UC_SERVRITY_UC 0x00010000 +#define PCIE_UC_SERVRITY_ROV 0x00020000 +#define PCIE_UC_SERVRITY_MLFP 0x00040000 +#define PCIE_UC_SERVRITY_ECRC 0x00080000 +#define PCIE_UC_SERVRITY_UR 0x00100000 + +#define REG_DEV_SERIALNUM_CTRL 0x200 +#define REG_DEV_MAC_SEL_MASK 0x0 /* 0:EUI; 1:MAC */ +#define REG_DEV_MAC_SEL_SHIFT 0 +#define REG_DEV_SERIAL_NUM_EN_MASK 0x1 +#define REG_DEV_SERIAL_NUM_EN_SHIFT 1 + +#define REG_TWSI_CTRL 0x218 +#define TWSI_CTRL_LD_OFFSET_MASK 0xFF +#define TWSI_CTRL_LD_OFFSET_SHIFT 0 +#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7 +#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8 +#define TWSI_CTRL_SW_LDSTART 0x800 +#define TWSI_CTRL_HW_LDSTART 0x1000 +#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F +#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15 +#define TWSI_CTRL_LD_EXIST 0x400000 +#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3 +#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23 +#define TWSI_CTRL_FREQ_SEL_100K 0 +#define TWSI_CTRL_FREQ_SEL_200K 1 +#define TWSI_CTRL_FREQ_SEL_300K 2 +#define TWSI_CTRL_FREQ_SEL_400K 3 +#define TWSI_CTRL_SMB_SLV_ADDR +#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3 +#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24 + + +#define REG_PCIE_DEV_MISC_CTRL 0x21C +#define PCIE_DEV_MISC_EXT_PIPE 0x2 +#define PCIE_DEV_MISC_RETRY_BUFDIS 0x1 +#define PCIE_DEV_MISC_SPIROM_EXIST 0x4 +#define PCIE_DEV_MISC_SERDES_ENDIAN 0x8 +#define PCIE_DEV_MISC_SERDES_SEL_DIN 0x10 + +#define REG_PCIE_PHYMISC 0x1000 +#define PCIE_PHYMISC_FORCE_RCV_DET 0x4 + +#define REG_TWSI_DEBUG 0x1108 +#define TWSI_DEBUG_DEV_EXIST 0x20000000 + +#define REG_EEPROM_CTRL 0x12C0 +#define EEPROM_CTRL_DATA_HI_MASK 0xFFFF +#define EEPROM_CTRL_DATA_HI_SHIFT 0 +#define EEPROM_CTRL_ADDR_MASK 0x3FF +#define EEPROM_CTRL_ADDR_SHIFT 16 +#define EEPROM_CTRL_ACK 0x40000000 +#define EEPROM_CTRL_RW 0x80000000 + +#define REG_EEPROM_DATA_LO 0x12C4 + +#define REG_OTP_CTRL 0x12F0 +#define OTP_CTRL_CLK_EN 0x0002 + +#define REG_PM_CTRL 0x12F8 +#define PM_CTRL_SDES_EN 0x00000001 +#define PM_CTRL_RBER_EN 0x00000002 +#define PM_CTRL_CLK_REQ_EN 0x00000004 +#define PM_CTRL_ASPM_L1_EN 0x00000008 +#define PM_CTRL_SERDES_L1_EN 0x00000010 +#define PM_CTRL_SERDES_PLL_L1_EN 0x00000020 +#define PM_CTRL_SERDES_PD_EX_L1 0x00000040 +#define PM_CTRL_SERDES_BUDS_RX_L1_EN 0x00000080 +#define PM_CTRL_L0S_ENTRY_TIMER_MASK 0xF +#define PM_CTRL_L0S_ENTRY_TIMER_SHIFT 8 +#define PM_CTRL_ASPM_L0S_EN 0x00001000 +#define PM_CTRL_CLK_SWH_L1 0x00002000 +#define PM_CTRL_CLK_PWM_VER1_1 0x00004000 +#define PM_CTRL_PCIE_RECV 0x00008000 +#define PM_CTRL_L1_ENTRY_TIMER_MASK 0xF +#define PM_CTRL_L1_ENTRY_TIMER_SHIFT 16 +#define PM_CTRL_PM_REQ_TIMER_MASK 0xF +#define PM_CTRL_PM_REQ_TIMER_SHIFT 20 +#define PM_CTRL_LCKDET_TIMER_MASK 0x3F +#define PM_CTRL_LCKDET_TIMER_SHIFT 24 +#define PM_CTRL_MAC_ASPM_CHK 0x40000000 +#define PM_CTRL_HOTRST 0x80000000 + +/* Selene Master Control Register */ +#define REG_MASTER_CTRL 0x1400 +#define MASTER_CTRL_SOFT_RST 0x1 +#define MASTER_CTRL_TEST_MODE_MASK 0x3 +#define MASTER_CTRL_TEST_MODE_SHIFT 2 +#define MASTER_CTRL_BERT_START 0x10 +#define MASTER_CTRL_MTIMER_EN 0x100 +#define MASTER_CTRL_MANUAL_INT 0x200 +#define MASTER_CTRL_TX_ITIMER_EN 0x400 +#define MASTER_CTRL_RX_ITIMER_EN 0x800 +#define MASTER_CTRL_CLK_SEL_DIS 0x1000 +#define MASTER_CTRL_CLK_SWH_MODE 0x2000 +#define MASTER_CTRL_INT_RDCLR 0x4000 +#define MASTER_CTRL_REV_NUM_SHIFT 16 +#define MASTER_CTRL_REV_NUM_MASK 0xff +#define MASTER_CTRL_DEV_ID_SHIFT 24 +#define MASTER_CTRL_DEV_ID_MASK 0x7f +#define MASTER_CTRL_OTP_SEL 0x80000000 + +/* Timer Initial Value Register */ +#define REG_MANUAL_TIMER_INIT 0x1404 + +/* IRQ ModeratorTimer Initial Value Register */ +#define REG_IRQ_MODRT_TIMER_INIT 0x1408 +#define IRQ_MODRT_TIMER_MASK 0xffff +#define IRQ_MODRT_TX_TIMER_SHIFT 0 +#define IRQ_MODRT_RX_TIMER_SHIFT 16 + +#define REG_GPHY_CTRL 0x140C +#define GPHY_CTRL_EXT_RESET 0x1 +#define GPHY_CTRL_RTL_MODE 0x2 +#define GPHY_CTRL_LED_MODE 0x4 +#define GPHY_CTRL_ANEG_NOW 0x8 +#define GPHY_CTRL_REV_ANEG 0x10 +#define GPHY_CTRL_GATE_25M_EN 0x20 +#define GPHY_CTRL_LPW_EXIT 0x40 +#define GPHY_CTRL_PHY_IDDQ 0x80 +#define GPHY_CTRL_PHY_IDDQ_DIS 0x100 +#define GPHY_CTRL_GIGA_DIS 0x200 +#define GPHY_CTRL_HIB_EN 0x400 +#define GPHY_CTRL_HIB_PULSE 0x800 +#define GPHY_CTRL_SEL_ANA_RST 0x1000 +#define GPHY_CTRL_PHY_PLL_ON 0x2000 +#define GPHY_CTRL_PWDOWN_HW 0x4000 +#define GPHY_CTRL_PHY_PLL_BYPASS 0x8000 + +#define GPHY_CTRL_DEFAULT ( \ + GPHY_CTRL_SEL_ANA_RST |\ + GPHY_CTRL_HIB_PULSE |\ + GPHY_CTRL_HIB_EN) + +#define GPHY_CTRL_PW_WOL_DIS ( \ + GPHY_CTRL_SEL_ANA_RST |\ + GPHY_CTRL_HIB_PULSE |\ + GPHY_CTRL_HIB_EN |\ + GPHY_CTRL_PWDOWN_HW |\ + GPHY_CTRL_PHY_IDDQ) + +/* Block IDLE Status Register */ +#define REG_IDLE_STATUS 0x1410 +#define IDLE_STATUS_MASK 0x00FF +#define IDLE_STATUS_RXMAC_NO_IDLE 0x1 +#define IDLE_STATUS_TXMAC_NO_IDLE 0x2 +#define IDLE_STATUS_RXQ_NO_IDLE 0x4 +#define IDLE_STATUS_TXQ_NO_IDLE 0x8 +#define IDLE_STATUS_DMAR_NO_IDLE 0x10 +#define IDLE_STATUS_DMAW_NO_IDLE 0x20 +#define IDLE_STATUS_SMB_NO_IDLE 0x40 +#define IDLE_STATUS_CMB_NO_IDLE 0x80 + +/* MDIO Control Register */ +#define REG_MDIO_CTRL 0x1414 +#define MDIO_DATA_MASK 0xffff /* On MDIO write, the 16-bit + * control data to write to PHY + * MII management register */ +#define MDIO_DATA_SHIFT 0 /* On MDIO read, the 16-bit + * status data that was read + * from the PHY MII management register */ +#define MDIO_REG_ADDR_MASK 0x1f /* MDIO register address */ +#define MDIO_REG_ADDR_SHIFT 16 +#define MDIO_RW 0x200000 /* 1: read, 0: write */ +#define MDIO_SUP_PREAMBLE 0x400000 /* Suppress preamble */ +#define MDIO_START 0x800000 /* Write 1 to initiate the MDIO + * master. And this bit is self + * cleared after one cycle */ +#define MDIO_CLK_SEL_SHIFT 24 +#define MDIO_CLK_25_4 0 +#define MDIO_CLK_25_6 2 +#define MDIO_CLK_25_8 3 +#define MDIO_CLK_25_10 4 +#define MDIO_CLK_25_14 5 +#define MDIO_CLK_25_20 6 +#define MDIO_CLK_25_28 7 +#define MDIO_BUSY 0x8000000 +#define MDIO_AP_EN 0x10000000 +#define MDIO_WAIT_TIMES 10 + +/* MII PHY Status Register */ +#define REG_PHY_STATUS 0x1418 +#define PHY_GENERAL_STATUS_MASK 0xFFFF +#define PHY_STATUS_RECV_ENABLE 0x0001 +#define PHY_OE_PWSP_STATUS_MASK 0x07FF +#define PHY_OE_PWSP_STATUS_SHIFT 16 +#define PHY_STATUS_LPW_STATE 0x80000000 +/* BIST Control and Status Register0 (for the Packet Memory) */ +#define REG_BIST0_CTRL 0x141c +#define BIST0_NOW 0x1 +#define BIST0_SRAM_FAIL 0x2 /* 1: The SRAM failure is + * un-repairable because + * it has address decoder + * failure or more than 1 cell + * stuck-to-x failure */ +#define BIST0_FUSE_FLAG 0x4 + +/* BIST Control and Status Register1(for the retry buffer of PCI Express) */ +#define REG_BIST1_CTRL 0x1420 +#define BIST1_NOW 0x1 +#define BIST1_SRAM_FAIL 0x2 +#define BIST1_FUSE_FLAG 0x4 + +/* SerDes Lock Detect Control and Status Register */ +#define REG_SERDES_LOCK 0x1424 +#define SERDES_LOCK_DETECT 0x1 /* SerDes lock detected. This signal + * comes from Analog SerDes */ +#define SERDES_LOCK_DETECT_EN 0x2 /* 1: Enable SerDes Lock detect function */ + +/* MAC Control Register */ +#define REG_MAC_CTRL 0x1480 +#define MAC_CTRL_TX_EN 0x1 +#define MAC_CTRL_RX_EN 0x2 +#define MAC_CTRL_TX_FLOW 0x4 +#define MAC_CTRL_RX_FLOW 0x8 +#define MAC_CTRL_LOOPBACK 0x10 +#define MAC_CTRL_DUPLX 0x20 +#define MAC_CTRL_ADD_CRC 0x40 +#define MAC_CTRL_PAD 0x80 +#define MAC_CTRL_LENCHK 0x100 +#define MAC_CTRL_HUGE_EN 0x200 +#define MAC_CTRL_PRMLEN_SHIFT 10 +#define MAC_CTRL_PRMLEN_MASK 0xf +#define MAC_CTRL_RMV_VLAN 0x4000 +#define MAC_CTRL_PROMIS_EN 0x8000 +#define MAC_CTRL_TX_PAUSE 0x10000 +#define MAC_CTRL_SCNT 0x20000 +#define MAC_CTRL_SRST_TX 0x40000 +#define MAC_CTRL_TX_SIMURST 0x80000 +#define MAC_CTRL_SPEED_SHIFT 20 +#define MAC_CTRL_SPEED_MASK 0x3 +#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000 +#define MAC_CTRL_TX_HUGE 0x800000 +#define MAC_CTRL_RX_CHKSUM_EN 0x1000000 +#define MAC_CTRL_MC_ALL_EN 0x2000000 +#define MAC_CTRL_BC_EN 0x4000000 +#define MAC_CTRL_DBG 0x8000000 +#define MAC_CTRL_SINGLE_PAUSE_EN 0x10000000 + +/* MAC IPG/IFG Control Register */ +#define REG_MAC_IPG_IFG 0x1484 +#define MAC_IPG_IFG_IPGT_SHIFT 0 /* Desired back to back + * inter-packet gap. The + * default is 96-bit time */ +#define MAC_IPG_IFG_IPGT_MASK 0x7f +#define MAC_IPG_IFG_MIFG_SHIFT 8 /* Minimum number of IFG to + * enforce in between RX frames */ +#define MAC_IPG_IFG_MIFG_MASK 0xff /* Frame gap below such IFP is dropped */ +#define MAC_IPG_IFG_IPGR1_SHIFT 16 /* 64bit Carrier-Sense window */ +#define MAC_IPG_IFG_IPGR1_MASK 0x7f +#define MAC_IPG_IFG_IPGR2_SHIFT 24 /* 96-bit IPG window */ +#define MAC_IPG_IFG_IPGR2_MASK 0x7f + +/* MAC STATION ADDRESS */ +#define REG_MAC_STA_ADDR 0x1488 + +/* Hash table for multicast address */ +#define REG_RX_HASH_TABLE 0x1490 + +/* MAC Half-Duplex Control Register */ +#define REG_MAC_HALF_DUPLX_CTRL 0x1498 +#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0 /* Collision Window */ +#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3ff +#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12 +#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xf +#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000 +#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000 +#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000 /* No back-off on backpressure, + * immediately start the + * transmission after back pressure */ +#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000 /* 1: Alternative Binary Exponential Back-off Enabled */ +#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20 /* Maximum binary exponential number */ +#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xf +#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24 /* IPG to start JAM for collision based flow control in half-duplex */ +#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xf /* mode. In unit of 8-bit time */ + +/* Maximum Frame Length Control Register */ +#define REG_MTU 0x149c + +/* Wake-On-Lan control register */ +#define REG_WOL_CTRL 0x14a0 +#define WOL_PATTERN_EN 0x00000001 +#define WOL_PATTERN_PME_EN 0x00000002 +#define WOL_MAGIC_EN 0x00000004 +#define WOL_MAGIC_PME_EN 0x00000008 +#define WOL_LINK_CHG_EN 0x00000010 +#define WOL_LINK_CHG_PME_EN 0x00000020 +#define WOL_PATTERN_ST 0x00000100 +#define WOL_MAGIC_ST 0x00000200 +#define WOL_LINKCHG_ST 0x00000400 +#define WOL_CLK_SWITCH_EN 0x00008000 +#define WOL_PT0_EN 0x00010000 +#define WOL_PT1_EN 0x00020000 +#define WOL_PT2_EN 0x00040000 +#define WOL_PT3_EN 0x00080000 +#define WOL_PT4_EN 0x00100000 +#define WOL_PT5_EN 0x00200000 +#define WOL_PT6_EN 0x00400000 + +/* WOL Length ( 2 DWORD ) */ +#define REG_WOL_PATTERN_LEN 0x14a4 +#define WOL_PT_LEN_MASK 0x7f +#define WOL_PT0_LEN_SHIFT 0 +#define WOL_PT1_LEN_SHIFT 8 +#define WOL_PT2_LEN_SHIFT 16 +#define WOL_PT3_LEN_SHIFT 24 +#define WOL_PT4_LEN_SHIFT 0 +#define WOL_PT5_LEN_SHIFT 8 +#define WOL_PT6_LEN_SHIFT 16 + +/* Internal SRAM Partition Register */ +#define RFDX_HEAD_ADDR_MASK 0x03FF +#define RFDX_HARD_ADDR_SHIFT 0 +#define RFDX_TAIL_ADDR_MASK 0x03FF +#define RFDX_TAIL_ADDR_SHIFT 16 + +#define REG_SRAM_RFD0_INFO 0x1500 +#define REG_SRAM_RFD1_INFO 0x1504 +#define REG_SRAM_RFD2_INFO 0x1508 +#define REG_SRAM_RFD3_INFO 0x150C + +#define REG_RFD_NIC_LEN 0x1510 /* In 8-bytes */ +#define RFD_NIC_LEN_MASK 0x03FF + +#define REG_SRAM_TRD_ADDR 0x1518 +#define TPD_HEAD_ADDR_MASK 0x03FF +#define TPD_HEAD_ADDR_SHIFT 0 +#define TPD_TAIL_ADDR_MASK 0x03FF +#define TPD_TAIL_ADDR_SHIFT 16 + +#define REG_SRAM_TRD_LEN 0x151C /* In 8-bytes */ +#define TPD_NIC_LEN_MASK 0x03FF + +#define REG_SRAM_RXF_ADDR 0x1520 +#define REG_SRAM_RXF_LEN 0x1524 +#define REG_SRAM_TXF_ADDR 0x1528 +#define REG_SRAM_TXF_LEN 0x152C +#define REG_SRAM_TCPH_ADDR 0x1530 +#define REG_SRAM_PKTH_ADDR 0x1532 + +/* + * Load Ptr Register + * Software sets this bit after the initialization of the head and tail */ +#define REG_LOAD_PTR 0x1534 + +/* + * addresses of all descriptors, as well as the following descriptor + * control register, which triggers each function block to load the head + * pointer to prepare for the operation. This bit is then self-cleared + * after one cycle. + */ +#define REG_RX_BASE_ADDR_HI 0x1540 +#define REG_TX_BASE_ADDR_HI 0x1544 +#define REG_SMB_BASE_ADDR_HI 0x1548 +#define REG_SMB_BASE_ADDR_LO 0x154C +#define REG_RFD0_HEAD_ADDR_LO 0x1550 +#define REG_RFD1_HEAD_ADDR_LO 0x1554 +#define REG_RFD2_HEAD_ADDR_LO 0x1558 +#define REG_RFD3_HEAD_ADDR_LO 0x155C +#define REG_RFD_RING_SIZE 0x1560 +#define RFD_RING_SIZE_MASK 0x0FFF +#define REG_RX_BUF_SIZE 0x1564 +#define RX_BUF_SIZE_MASK 0xFFFF +#define REG_RRD0_HEAD_ADDR_LO 0x1568 +#define REG_RRD1_HEAD_ADDR_LO 0x156C +#define REG_RRD2_HEAD_ADDR_LO 0x1570 +#define REG_RRD3_HEAD_ADDR_LO 0x1574 +#define REG_RRD_RING_SIZE 0x1578 +#define RRD_RING_SIZE_MASK 0x0FFF +#define REG_HTPD_HEAD_ADDR_LO 0x157C +#define REG_NTPD_HEAD_ADDR_LO 0x1580 +#define REG_TPD_RING_SIZE 0x1584 +#define TPD_RING_SIZE_MASK 0xFFFF +#define REG_CMB_BASE_ADDR_LO 0x1588 + +/* RSS about */ +#define REG_RSS_KEY0 0x14B0 +#define REG_RSS_KEY1 0x14B4 +#define REG_RSS_KEY2 0x14B8 +#define REG_RSS_KEY3 0x14BC +#define REG_RSS_KEY4 0x14C0 +#define REG_RSS_KEY5 0x14C4 +#define REG_RSS_KEY6 0x14C8 +#define REG_RSS_KEY7 0x14CC +#define REG_RSS_KEY8 0x14D0 +#define REG_RSS_KEY9 0x14D4 +#define REG_IDT_TABLE0 0x14E0 +#define REG_IDT_TABLE1 0x14E4 +#define REG_IDT_TABLE2 0x14E8 +#define REG_IDT_TABLE3 0x14EC +#define REG_IDT_TABLE4 0x14F0 +#define REG_IDT_TABLE5 0x14F4 +#define REG_IDT_TABLE6 0x14F8 +#define REG_IDT_TABLE7 0x14FC +#define REG_IDT_TABLE REG_IDT_TABLE0 +#define REG_RSS_HASH_VALUE 0x15B0 +#define REG_RSS_HASH_FLAG 0x15B4 +#define REG_BASE_CPU_NUMBER 0x15B8 + +/* TXQ Control Register */ +#define REG_TXQ_CTRL 0x1590 +#define TXQ_NUM_TPD_BURST_MASK 0xF +#define TXQ_NUM_TPD_BURST_SHIFT 0 +#define TXQ_CTRL_IP_OPTION_EN 0x10 +#define TXQ_CTRL_EN 0x20 +#define TXQ_CTRL_ENH_MODE 0x40 +#define TXQ_CTRL_LS_8023_EN 0x80 +#define TXQ_TXF_BURST_NUM_SHIFT 16 +#define TXQ_TXF_BURST_NUM_MASK 0xFFFF + +/* Jumbo packet Threshold for task offload */ +#define REG_TX_TSO_OFFLOAD_THRESH 0x1594 /* In 8-bytes */ +#define TX_TSO_OFFLOAD_THRESH_MASK 0x07FF + +#define REG_TXF_WATER_MARK 0x1598 /* In 8-bytes */ +#define TXF_WATER_MARK_MASK 0x0FFF +#define TXF_LOW_WATER_MARK_SHIFT 0 +#define TXF_HIGH_WATER_MARK_SHIFT 16 +#define TXQ_CTRL_BURST_MODE_EN 0x80000000 + +#define REG_THRUPUT_MON_CTRL 0x159C +#define THRUPUT_MON_RATE_MASK 0x3 +#define THRUPUT_MON_RATE_SHIFT 0 +#define THRUPUT_MON_EN 0x80 + +/* RXQ Control Register */ +#define REG_RXQ_CTRL 0x15A0 +#define ASPM_THRUPUT_LIMIT_MASK 0x3 +#define ASPM_THRUPUT_LIMIT_SHIFT 0 +#define ASPM_THRUPUT_LIMIT_NO 0x00 +#define ASPM_THRUPUT_LIMIT_1M 0x01 +#define ASPM_THRUPUT_LIMIT_10M 0x02 +#define ASPM_THRUPUT_LIMIT_100M 0x04 +#define RXQ1_CTRL_EN 0x10 +#define RXQ2_CTRL_EN 0x20 +#define RXQ3_CTRL_EN 0x40 +#define IPV6_CHKSUM_CTRL_EN 0x80 +#define RSS_HASH_BITS_MASK 0x00FF +#define RSS_HASH_BITS_SHIFT 8 +#define RSS_HASH_IPV4 0x10000 +#define RSS_HASH_IPV4_TCP 0x20000 +#define RSS_HASH_IPV6 0x40000 +#define RSS_HASH_IPV6_TCP 0x80000 +#define RXQ_RFD_BURST_NUM_MASK 0x003F +#define RXQ_RFD_BURST_NUM_SHIFT 20 +#define RSS_MODE_MASK 0x0003 +#define RSS_MODE_SHIFT 26 +#define RSS_NIP_QUEUE_SEL_MASK 0x1 +#define RSS_NIP_QUEUE_SEL_SHIFT 28 +#define RRS_HASH_CTRL_EN 0x20000000 +#define RX_CUT_THRU_EN 0x40000000 +#define RXQ_CTRL_EN 0x80000000 + +#define REG_RFD_FREE_THRESH 0x15A4 +#define RFD_FREE_THRESH_MASK 0x003F +#define RFD_FREE_HI_THRESH_SHIFT 0 +#define RFD_FREE_LO_THRESH_SHIFT 6 + +/* RXF flow control register */ +#define REG_RXQ_RXF_PAUSE_THRESH 0x15A8 +#define RXQ_RXF_PAUSE_TH_HI_SHIFT 0 +#define RXQ_RXF_PAUSE_TH_HI_MASK 0x0FFF +#define RXQ_RXF_PAUSE_TH_LO_SHIFT 16 +#define RXQ_RXF_PAUSE_TH_LO_MASK 0x0FFF + +#define REG_RXD_DMA_CTRL 0x15AC +#define RXD_DMA_THRESH_MASK 0x0FFF /* In 8-bytes */ +#define RXD_DMA_THRESH_SHIFT 0 +#define RXD_DMA_DOWN_TIMER_MASK 0xFFFF +#define RXD_DMA_DOWN_TIMER_SHIFT 16 + +/* DMA Engine Control Register */ +#define REG_DMA_CTRL 0x15C0 +#define DMA_CTRL_DMAR_IN_ORDER 0x1 +#define DMA_CTRL_DMAR_ENH_ORDER 0x2 +#define DMA_CTRL_DMAR_OUT_ORDER 0x4 +#define DMA_CTRL_RCB_VALUE 0x8 +#define DMA_CTRL_DMAR_BURST_LEN_MASK 0x0007 +#define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4 +#define DMA_CTRL_DMAW_BURST_LEN_MASK 0x0007 +#define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7 +#define DMA_CTRL_DMAR_REQ_PRI 0x400 +#define DMA_CTRL_DMAR_DLY_CNT_MASK 0x001F +#define DMA_CTRL_DMAR_DLY_CNT_SHIFT 11 +#define DMA_CTRL_DMAW_DLY_CNT_MASK 0x000F +#define DMA_CTRL_DMAW_DLY_CNT_SHIFT 16 +#define DMA_CTRL_CMB_EN 0x100000 +#define DMA_CTRL_SMB_EN 0x200000 +#define DMA_CTRL_CMB_NOW 0x400000 +#define MAC_CTRL_SMB_DIS 0x1000000 +#define DMA_CTRL_SMB_NOW 0x80000000 + +/* CMB/SMB Control Register */ +#define REG_SMB_STAT_TIMER 0x15C4 /* 2us resolution */ +#define SMB_STAT_TIMER_MASK 0xFFFFFF +#define REG_CMB_TPD_THRESH 0x15C8 +#define CMB_TPD_THRESH_MASK 0xFFFF +#define REG_CMB_TX_TIMER 0x15CC /* 2us resolution */ +#define CMB_TX_TIMER_MASK 0xFFFF + +/* Mail box */ +#define MB_RFDX_PROD_IDX_MASK 0xFFFF +#define REG_MB_RFD0_PROD_IDX 0x15E0 +#define REG_MB_RFD1_PROD_IDX 0x15E4 +#define REG_MB_RFD2_PROD_IDX 0x15E8 +#define REG_MB_RFD3_PROD_IDX 0x15EC + +#define MB_PRIO_PROD_IDX_MASK 0xFFFF +#define REG_MB_PRIO_PROD_IDX 0x15F0 +#define MB_HTPD_PROD_IDX_SHIFT 0 +#define MB_NTPD_PROD_IDX_SHIFT 16 + +#define MB_PRIO_CONS_IDX_MASK 0xFFFF +#define REG_MB_PRIO_CONS_IDX 0x15F4 +#define MB_HTPD_CONS_IDX_SHIFT 0 +#define MB_NTPD_CONS_IDX_SHIFT 16 + +#define REG_MB_RFD01_CONS_IDX 0x15F8 +#define MB_RFD0_CONS_IDX_MASK 0x0000FFFF +#define MB_RFD1_CONS_IDX_MASK 0xFFFF0000 +#define REG_MB_RFD23_CONS_IDX 0x15FC +#define MB_RFD2_CONS_IDX_MASK 0x0000FFFF +#define MB_RFD3_CONS_IDX_MASK 0xFFFF0000 + +/* Interrupt Status Register */ +#define REG_ISR 0x1600 +#define ISR_SMB 0x00000001 +#define ISR_TIMER 0x00000002 +/* + * Software manual interrupt, for debug. Set when SW_MAN_INT_EN is set + * in Table 51 Selene Master Control Register (Offset 0x1400). + */ +#define ISR_MANUAL 0x00000004 +#define ISR_HW_RXF_OV 0x00000008 /* RXF overflow interrupt */ +#define ISR_RFD0_UR 0x00000010 /* RFD0 under run */ +#define ISR_RFD1_UR 0x00000020 +#define ISR_RFD2_UR 0x00000040 +#define ISR_RFD3_UR 0x00000080 +#define ISR_TXF_UR 0x00000100 +#define ISR_DMAR_TO_RST 0x00000200 +#define ISR_DMAW_TO_RST 0x00000400 +#define ISR_TX_CREDIT 0x00000800 +#define ISR_GPHY 0x00001000 +/* GPHY low power state interrupt */ +#define ISR_GPHY_LPW 0x00002000 +#define ISR_TXQ_TO_RST 0x00004000 +#define ISR_TX_PKT 0x00008000 +#define ISR_RX_PKT_0 0x00010000 +#define ISR_RX_PKT_1 0x00020000 +#define ISR_RX_PKT_2 0x00040000 +#define ISR_RX_PKT_3 0x00080000 +#define ISR_MAC_RX 0x00100000 +#define ISR_MAC_TX 0x00200000 +#define ISR_UR_DETECTED 0x00400000 +#define ISR_FERR_DETECTED 0x00800000 +#define ISR_NFERR_DETECTED 0x01000000 +#define ISR_CERR_DETECTED 0x02000000 +#define ISR_PHY_LINKDOWN 0x04000000 +#define ISR_DIS_INT 0x80000000 + +/* Interrupt Mask Register */ +#define REG_IMR 0x1604 + +#define IMR_NORMAL_MASK (\ + ISR_MANUAL |\ + ISR_HW_RXF_OV |\ + ISR_RFD0_UR |\ + ISR_TXF_UR |\ + ISR_DMAR_TO_RST |\ + ISR_TXQ_TO_RST |\ + ISR_DMAW_TO_RST |\ + ISR_GPHY |\ + ISR_TX_PKT |\ + ISR_RX_PKT_0 |\ + ISR_GPHY_LPW |\ + ISR_PHY_LINKDOWN) + +#define ISR_RX_PKT (\ + ISR_RX_PKT_0 |\ + ISR_RX_PKT_1 |\ + ISR_RX_PKT_2 |\ + ISR_RX_PKT_3) + +#define ISR_OVER (\ + ISR_RFD0_UR |\ + ISR_RFD1_UR |\ + ISR_RFD2_UR |\ + ISR_RFD3_UR |\ + ISR_HW_RXF_OV |\ + ISR_TXF_UR) + +#define ISR_ERROR (\ + ISR_DMAR_TO_RST |\ + ISR_TXQ_TO_RST |\ + ISR_DMAW_TO_RST |\ + ISR_PHY_LINKDOWN) + +#define REG_INT_RETRIG_TIMER 0x1608 +#define INT_RETRIG_TIMER_MASK 0xFFFF + +#define REG_HDS_CTRL 0x160C +#define HDS_CTRL_EN 0x0001 +#define HDS_CTRL_BACKFILLSIZE_SHIFT 8 +#define HDS_CTRL_BACKFILLSIZE_MASK 0x0FFF +#define HDS_CTRL_MAX_HDRSIZE_SHIFT 20 +#define HDS_CTRL_MAC_HDRSIZE_MASK 0x0FFF + +#define REG_MAC_RX_STATUS_BIN 0x1700 +#define REG_MAC_RX_STATUS_END 0x175c +#define REG_MAC_TX_STATUS_BIN 0x1760 +#define REG_MAC_TX_STATUS_END 0x17c0 + +/* DEBUG ADDR */ +#define REG_DEBUG_DATA0 0x1900 +#define REG_DEBUG_DATA1 0x1904 + +/* PHY Control Register */ +#define MII_BMCR 0x00 +#define BMCR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define BMCR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ +#define BMCR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define BMCR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define BMCR_ISOLATE 0x0400 /* Isolate PHY from MII */ +#define BMCR_POWER_DOWN 0x0800 /* Power down */ +#define BMCR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define BMCR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define BMCR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define BMCR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ +#define BMCR_SPEED_MASK 0x2040 +#define BMCR_SPEED_1000 0x0040 +#define BMCR_SPEED_100 0x2000 +#define BMCR_SPEED_10 0x0000 + +/* PHY Status Register */ +#define MII_BMSR 0x01 +#define BMMSR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ +#define BMSR_JABBER_DETECT 0x0002 /* Jabber Detected */ +#define BMSR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define BMSR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ +#define BMSR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ +#define BMSR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ +#define BMSR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ +#define BMSR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ +#define BMSR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ +#define BMSR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ +#define BMSR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ +#define BMSR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ +#define BMSR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ +#define BMMII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ +#define BMMII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ + +#define MII_PHYSID1 0x02 +#define MII_PHYSID2 0x03 + +/* Autoneg Advertisement Register */ +#define MII_ADVERTISE 0x04 +#define ADVERTISE_SPEED_MASK 0x01E0 +#define ADVERTISE_DEFAULT_CAP 0x0DE0 + +/* 1000BASE-T Control Register */ +#define MII_GIGA_CR 0x09 +#define GIGA_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port 0=DTE device */ + +#define GIGA_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master 0=Configure PHY as Slave */ +#define GIGA_CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value 0=Automatic Master/Slave config */ +#define GIGA_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ +#define GIGA_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ +#define GIGA_CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ +#define GIGA_CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ +#define GIGA_CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ +#define GIGA_CR_1000T_SPEED_MASK 0x0300 +#define GIGA_CR_1000T_DEFAULT_CAP 0x0300 + +/* PHY Specific Status Register */ +#define MII_GIGA_PSSR 0x11 +#define GIGA_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ +#define GIGA_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ +#define GIGA_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ +#define GIGA_PSSR_10MBS 0x0000 /* 00=10Mbs */ +#define GIGA_PSSR_100MBS 0x4000 /* 01=100Mbs */ +#define GIGA_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ + +/* PHY Interrupt Enable Register */ +#define MII_IER 0x12 +#define IER_LINK_UP 0x0400 +#define IER_LINK_DOWN 0x0800 + +/* PHY Interrupt Status Register */ +#define MII_ISR 0x13 +#define ISR_LINK_UP 0x0400 +#define ISR_LINK_DOWN 0x0800 + +/* Cable-Detect-Test Control Register */ +#define MII_CDTC 0x16 +#define CDTC_EN_OFF 0 /* sc */ +#define CDTC_EN_BITS 1 +#define CDTC_PAIR_OFF 8 +#define CDTC_PAIR_BIT 2 + +/* Cable-Detect-Test Status Register */ +#define MII_CDTS 0x1C +#define CDTS_STATUS_OFF 8 +#define CDTS_STATUS_BITS 2 +#define CDTS_STATUS_NORMAL 0 +#define CDTS_STATUS_SHORT 1 +#define CDTS_STATUS_OPEN 2 +#define CDTS_STATUS_INVALID 3 + +#define MII_DBG_ADDR 0x1D +#define MII_DBG_DATA 0x1E + +#define MII_ANA_CTRL_0 0x0 +#define ANA_RESTART_CAL 0x0001 +#define ANA_MANUL_SWICH_ON_SHIFT 0x1 +#define ANA_MANUL_SWICH_ON_MASK 0xF +#define ANA_MAN_ENABLE 0x0020 +#define ANA_SEL_HSP 0x0040 +#define ANA_EN_HB 0x0080 +#define ANA_EN_HBIAS 0x0100 +#define ANA_OEN_125M 0x0200 +#define ANA_EN_LCKDT 0x0400 +#define ANA_LCKDT_PHY 0x0800 +#define ANA_AFE_MODE 0x1000 +#define ANA_VCO_SLOW 0x2000 +#define ANA_VCO_FAST 0x4000 +#define ANA_SEL_CLK125M_DSP 0x8000 + +#define MII_ANA_CTRL_4 0x4 +#define ANA_IECHO_ADJ_MASK 0xF +#define ANA_IECHO_ADJ_3_SHIFT 0 +#define ANA_IECHO_ADJ_2_SHIFT 4 +#define ANA_IECHO_ADJ_1_SHIFT 8 +#define ANA_IECHO_ADJ_0_SHIFT 12 + +#define MII_ANA_CTRL_5 0x5 +#define ANA_SERDES_CDR_BW_SHIFT 0 +#define ANA_SERDES_CDR_BW_MASK 0x3 +#define ANA_MS_PAD_DBG 0x0004 +#define ANA_SPEEDUP_DBG 0x0008 +#define ANA_SERDES_TH_LOS_SHIFT 4 +#define ANA_SERDES_TH_LOS_MASK 0x3 +#define ANA_SERDES_EN_DEEM 0x0040 +#define ANA_SERDES_TXELECIDLE 0x0080 +#define ANA_SERDES_BEACON 0x0100 +#define ANA_SERDES_HALFTXDR 0x0200 +#define ANA_SERDES_SEL_HSP 0x0400 +#define ANA_SERDES_EN_PLL 0x0800 +#define ANA_SERDES_EN 0x1000 +#define ANA_SERDES_EN_LCKDT 0x2000 + +#define MII_ANA_CTRL_11 0xB +#define ANA_PS_HIB_EN 0x8000 + +#define MII_ANA_CTRL_18 0x12 +#define ANA_TEST_MODE_10BT_01SHIFT 0 +#define ANA_TEST_MODE_10BT_01MASK 0x3 +#define ANA_LOOP_SEL_10BT 0x0004 +#define ANA_RGMII_MODE_SW 0x0008 +#define ANA_EN_LONGECABLE 0x0010 +#define ANA_TEST_MODE_10BT_2 0x0020 +#define ANA_EN_10BT_IDLE 0x0400 +#define ANA_EN_MASK_TB 0x0800 +#define ANA_TRIGGER_SEL_TIMER_SHIFT 12 +#define ANA_TRIGGER_SEL_TIMER_MASK 0x3 +#define ANA_INTERVAL_SEL_TIMER_SHIFT 14 +#define ANA_INTERVAL_SEL_TIMER_MASK 0x3 + +#define MII_ANA_CTRL_41 0x29 +#define ANA_TOP_PS_EN 0x8000 + +#define MII_ANA_CTRL_54 0x36 +#define ANA_LONG_CABLE_TH_100_SHIFT 0 +#define ANA_LONG_CABLE_TH_100_MASK 0x3F +#define ANA_DESERVED 0x0040 +#define ANA_EN_LIT_CH 0x0080 +#define ANA_SHORT_CABLE_TH_100_SHIFT 8 +#define ANA_SHORT_CABLE_TH_100_MASK 0x3F +#define ANA_BP_BAD_LINK_ACCUM 0x4000 +#define ANA_BP_SMALL_BW 0x8000 + +#endif /*_ATL1C_HW_H_*/ diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c new file mode 100644 index 000000000000..deb7b53167ee --- /dev/null +++ b/drivers/net/atl1c/atl1c_main.c @@ -0,0 +1,2797 @@ +/* + * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include "atl1c.h" + +#define ATL1C_DRV_VERSION "1.0.0.1-NAPI" +char atl1c_driver_name[] = "atl1c"; +char atl1c_driver_version[] = ATL1C_DRV_VERSION; +#define PCI_DEVICE_ID_ATTANSIC_L2C 0x1062 +#define PCI_DEVICE_ID_ATTANSIC_L1C 0x1063 +/* + * atl1c_pci_tbl - PCI Device ID Table + * + * Wildcard entries (PCI_ANY_ID) should come last + * Last entry must be all 0s + * + * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, + * Class, Class Mask, private data (not used) } + */ +static struct pci_device_id atl1c_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1C)}, + {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2C)}, + /* required last entry */ + { 0 } +}; +MODULE_DEVICE_TABLE(pci, atl1c_pci_tbl); + +MODULE_AUTHOR("Jie Yang <jie.yang@atheros.com>"); +MODULE_DESCRIPTION("Atheros 1000M Ethernet Network Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(ATL1C_DRV_VERSION); + +static int atl1c_stop_mac(struct atl1c_hw *hw); +static void atl1c_enable_rx_ctrl(struct atl1c_hw *hw); +static void atl1c_enable_tx_ctrl(struct atl1c_hw *hw); +static void atl1c_disable_l0s_l1(struct atl1c_hw *hw); +static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup); +static void atl1c_setup_mac_ctrl(struct atl1c_adapter *adapter); +static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter, u8 que, + int *work_done, int work_to_do); + +static const u16 atl1c_pay_load_size[] = { + 128, 256, 512, 1024, 2048, 4096, +}; + +static const u16 atl1c_rfd_prod_idx_regs[AT_MAX_RECEIVE_QUEUE] = +{ + REG_MB_RFD0_PROD_IDX, + REG_MB_RFD1_PROD_IDX, + REG_MB_RFD2_PROD_IDX, + REG_MB_RFD3_PROD_IDX +}; + +static const u16 atl1c_rfd_addr_lo_regs[AT_MAX_RECEIVE_QUEUE] = +{ + REG_RFD0_HEAD_ADDR_LO, + REG_RFD1_HEAD_ADDR_LO, + REG_RFD2_HEAD_ADDR_LO, + REG_RFD3_HEAD_ADDR_LO +}; + +static const u16 atl1c_rrd_addr_lo_regs[AT_MAX_RECEIVE_QUEUE] = +{ + REG_RRD0_HEAD_ADDR_LO, + REG_RRD1_HEAD_ADDR_LO, + REG_RRD2_HEAD_ADDR_LO, + REG_RRD3_HEAD_ADDR_LO +}; + +static const u32 atl1c_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | + NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP; + +/* + * atl1c_init_pcie - init PCIE module + */ +static void atl1c_reset_pcie(struct atl1c_hw *hw, u32 flag) +{ + u32 data; + u32 pci_cmd; + struct pci_dev *pdev = hw->adapter->pdev; + + AT_READ_REG(hw, PCI_COMMAND, &pci_cmd); + pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; + pci_cmd |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + PCI_COMMAND_IO); + AT_WRITE_REG(hw, PCI_COMMAND, pci_cmd); + + /* + * Clear any PowerSaveing Settings + */ + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + /* + * Mask some pcie error bits + */ + AT_READ_REG(hw, REG_PCIE_UC_SEVERITY, &data); + data &= ~PCIE_UC_SERVRITY_DLP; + data &= ~PCIE_UC_SERVRITY_FCP; + AT_WRITE_REG(hw, REG_PCIE_UC_SEVERITY, data); + + if (flag & ATL1C_PCIE_L0S_L1_DISABLE) + atl1c_disable_l0s_l1(hw); + if (flag & ATL1C_PCIE_PHY_RESET) + AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT); + else + AT_WRITE_REG(hw, REG_GPHY_CTRL, + GPHY_CTRL_DEFAULT | GPHY_CTRL_EXT_RESET); + + msleep(1); +} + +/* + * atl1c_irq_enable - Enable default interrupt generation settings + * @adapter: board private structure + */ +static inline void atl1c_irq_enable(struct atl1c_adapter *adapter) +{ + if (likely(atomic_dec_and_test(&adapter->irq_sem))) { + AT_WRITE_REG(&adapter->hw, REG_ISR, 0x7FFFFFFF); + AT_WRITE_REG(&adapter->hw, REG_IMR, adapter->hw.intr_mask); + AT_WRITE_FLUSH(&adapter->hw); + } +} + +/* + * atl1c_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure + */ +static inline void atl1c_irq_disable(struct atl1c_adapter *adapter) +{ + atomic_inc(&adapter->irq_sem); + AT_WRITE_REG(&adapter->hw, REG_IMR, 0); + AT_WRITE_FLUSH(&adapter->hw); + synchronize_irq(adapter->pdev->irq); +} + +/* + * atl1c_irq_reset - reset interrupt confiure on the NIC + * @adapter: board private structure + */ +static inline void atl1c_irq_reset(struct atl1c_adapter *adapter) +{ + atomic_set(&adapter->irq_sem, 1); + atl1c_irq_enable(adapter); +} + +/* + * atl1c_phy_config - Timer Call-back + * @data: pointer to netdev cast into an unsigned long + */ +static void atl1c_phy_config(unsigned long data) +{ + struct atl1c_adapter *adapter = (struct atl1c_adapter *) data; + struct atl1c_hw *hw = &adapter->hw; + unsigned long flags; + + spin_lock_irqsave(&adapter->mdio_lock, flags); + atl1c_restart_autoneg(hw); + spin_unlock_irqrestore(&adapter->mdio_lock, flags); +} + +void atl1c_reinit_locked(struct atl1c_adapter *adapter) +{ + + WARN_ON(in_interrupt()); + atl1c_down(adapter); + atl1c_up(adapter); + clear_bit(__AT_RESETTING, &adapter->flags); +} + +static void atl1c_reset_task(struct work_struct *work) +{ + struct atl1c_adapter *adapter; + struct net_device *netdev; + + adapter = container_of(work, struct atl1c_adapter, reset_task); + netdev = adapter->netdev; + + netif_device_detach(netdev); + atl1c_down(adapter); + atl1c_up(adapter); + netif_device_attach(netdev); +} + +static void atl1c_check_link_status(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + int err; + unsigned long flags; + u16 speed, duplex, phy_data; + + spin_lock_irqsave(&adapter->mdio_lock, flags); + /* MII_BMSR must read twise */ + atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); + atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); + spin_unlock_irqrestore(&adapter->mdio_lock, flags); + + if ((phy_data & BMSR_LSTATUS) == 0) { + /* link down */ + if (netif_carrier_ok(netdev)) { + hw->hibernate = true; + atl1c_set_aspm(hw, false); + if (atl1c_stop_mac(hw) != 0) + if (netif_msg_hw(adapter)) + dev_warn(&pdev->dev, + "stop mac failed\n"); + } + netif_carrier_off(netdev); + } else { + /* Link Up */ + hw->hibernate = false; + spin_lock_irqsave(&adapter->mdio_lock, flags); + err = atl1c_get_speed_and_duplex(hw, &speed, &duplex); + spin_unlock_irqrestore(&adapter->mdio_lock, flags); + if (unlikely(err)) + return; + /* link result is our setting */ + if (adapter->link_speed != speed || + adapter->link_duplex != duplex) { + adapter->link_speed = speed; + adapter->link_duplex = duplex; + atl1c_enable_tx_ctrl(hw); + atl1c_enable_rx_ctrl(hw); + atl1c_setup_mac_ctrl(adapter); + atl1c_set_aspm(hw, true); + if (netif_msg_link(adapter)) + dev_info(&pdev->dev, + "%s: %s NIC Link is Up<%d Mbps %s>\n", + atl1c_driver_name, netdev->name, + adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? + "Full Duplex" : "Half Duplex"); + } + if (!netif_carrier_ok(netdev)) + netif_carrier_on(netdev); + } +} + +/* + * atl1c_link_chg_task - deal with link change event Out of interrupt context + * @netdev: network interface device structure + */ +static void atl1c_link_chg_task(struct work_struct *work) +{ + struct atl1c_adapter *adapter; + + adapter = container_of(work, struct atl1c_adapter, link_chg_task); + atl1c_check_link_status(adapter); +} + +static void atl1c_link_chg_event(struct atl1c_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + u16 phy_data; + u16 link_up; + + spin_lock(&adapter->mdio_lock); + atl1c_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); + atl1c_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data); + spin_unlock(&adapter->mdio_lock); + link_up = phy_data & BMSR_LSTATUS; + /* notify upper layer link down ASAP */ + if (!link_up) { + if (netif_carrier_ok(netdev)) { + /* old link state: Up */ + netif_carrier_off(netdev); + if (netif_msg_link(adapter)) + dev_info(&pdev->dev, + "%s: %s NIC Link is Down\n", + atl1c_driver_name, netdev->name); + adapter->link_speed = SPEED_0; + } + } + schedule_work(&adapter->link_chg_task); +} + +static void atl1c_del_timer(struct atl1c_adapter *adapter) +{ + del_timer_sync(&adapter->phy_config_timer); +} + +static void atl1c_cancel_work(struct atl1c_adapter *adapter) +{ + cancel_work_sync(&adapter->reset_task); + cancel_work_sync(&adapter->link_chg_task); +} + +/* + * atl1c_tx_timeout - Respond to a Tx Hang + * @netdev: network interface device structure + */ +static void atl1c_tx_timeout(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + + /* Do the reset outside of interrupt context */ + schedule_work(&adapter->reset_task); +} + +/* + * atl1c_set_multi - Multicast and Promiscuous mode set + * @netdev: network interface device structure + * + * The set_multi entry point is called whenever the multicast address + * list or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper multicast, + * promiscuous mode, and all-multi behavior. + */ +static void atl1c_set_multi(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct atl1c_hw *hw = &adapter->hw; + struct dev_mc_list *mc_ptr; + u32 mac_ctrl_data; + u32 hash_value; + + /* Check for Promiscuous and All Multicast modes */ + AT_READ_REG(hw, REG_MAC_CTRL, &mac_ctrl_data); + + if (netdev->flags & IFF_PROMISC) { + mac_ctrl_data |= MAC_CTRL_PROMIS_EN; + } else if (netdev->flags & IFF_ALLMULTI) { + mac_ctrl_data |= MAC_CTRL_MC_ALL_EN; + mac_ctrl_data &= ~MAC_CTRL_PROMIS_EN; + } else { + mac_ctrl_data &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN); + } + + AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); + + /* clear the old settings from the multicast hash table */ + AT_WRITE_REG(hw, REG_RX_HASH_TABLE, 0); + AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0); + + /* comoute mc addresses' hash value ,and put it into hash table */ + for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) { + hash_value = atl1c_hash_mc_addr(hw, mc_ptr->dmi_addr); + atl1c_hash_set(hw, hash_value); + } +} + +static void atl1c_vlan_rx_register(struct net_device *netdev, + struct vlan_group *grp) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct pci_dev *pdev = adapter->pdev; + u32 mac_ctrl_data = 0; + + if (netif_msg_pktdata(adapter)) + dev_dbg(&pdev->dev, "atl1c_vlan_rx_register\n"); + + atl1c_irq_disable(adapter); + + adapter->vlgrp = grp; + AT_READ_REG(&adapter->hw, REG_MAC_CTRL, &mac_ctrl_data); + + if (grp) { + /* enable VLAN tag insert/strip */ + mac_ctrl_data |= MAC_CTRL_RMV_VLAN; + } else { + /* disable VLAN tag insert/strip */ + mac_ctrl_data &= ~MAC_CTRL_RMV_VLAN; + } + + AT_WRITE_REG(&adapter->hw, REG_MAC_CTRL, mac_ctrl_data); + atl1c_irq_enable(adapter); +} + +static void atl1c_restore_vlan(struct atl1c_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + + if (netif_msg_pktdata(adapter)) + dev_dbg(&pdev->dev, "atl1c_restore_vlan !"); + atl1c_vlan_rx_register(adapter->netdev, adapter->vlgrp); +} +/* + * atl1c_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + */ +static int atl1c_set_mac_addr(struct net_device *netdev, void *p) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + if (netif_running(netdev)) + return -EBUSY; + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len); + + atl1c_hw_set_mac_addr(&adapter->hw); + + return 0; +} + +static void atl1c_set_rxbufsize(struct atl1c_adapter *adapter, + struct net_device *dev) +{ + int mtu = dev->mtu; + + adapter->rx_buffer_len = mtu > AT_RX_BUF_SIZE ? + roundup(mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN, 8) : AT_RX_BUF_SIZE; +} +/* + * atl1c_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + */ +static int atl1c_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + int old_mtu = netdev->mtu; + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; + + if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || + (max_frame > MAX_JUMBO_FRAME_SIZE)) { + if (netif_msg_link(adapter)) + dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); + return -EINVAL; + } + /* set MTU */ + if (old_mtu != new_mtu && netif_running(netdev)) { + while (test_and_set_bit(__AT_RESETTING, &adapter->flags)) + msleep(1); + netdev->mtu = new_mtu; + adapter->hw.max_frame_size = new_mtu; + atl1c_set_rxbufsize(adapter, netdev); + atl1c_down(adapter); + atl1c_up(adapter); + clear_bit(__AT_RESETTING, &adapter->flags); + if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) { + u32 phy_data; + + AT_READ_REG(&adapter->hw, 0x1414, &phy_data); + phy_data |= 0x10000000; + AT_WRITE_REG(&adapter->hw, 0x1414, phy_data); + } + + } + return 0; +} + +/* + * caller should hold mdio_lock + */ +static int atl1c_mdio_read(struct net_device *netdev, int phy_id, int reg_num) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + u16 result; + + atl1c_read_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, &result); + return result; +} + +static void atl1c_mdio_write(struct net_device *netdev, int phy_id, + int reg_num, int val) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + + atl1c_write_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, val); +} + +/* + * atl1c_mii_ioctl - + * @netdev: + * @ifreq: + * @cmd: + */ +static int atl1c_mii_ioctl(struct net_device *netdev, + struct ifreq *ifr, int cmd) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct pci_dev *pdev = adapter->pdev; + struct mii_ioctl_data *data = if_mii(ifr); + unsigned long flags; + int retval = 0; + + if (!netif_running(netdev)) + return -EINVAL; + + spin_lock_irqsave(&adapter->mdio_lock, flags); + switch (cmd) { + case SIOCGMIIPHY: + data->phy_id = 0; + break; + + case SIOCGMIIREG: + if (!capable(CAP_NET_ADMIN)) { + retval = -EPERM; + goto out; + } + if (atl1c_read_phy_reg(&adapter->hw, data->reg_num & 0x1F, + &data->val_out)) { + retval = -EIO; + goto out; + } + break; + + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) { + retval = -EPERM; + goto out; + } + if (data->reg_num & ~(0x1F)) { + retval = -EFAULT; + goto out; + } + + dev_dbg(&pdev->dev, "<atl1c_mii_ioctl> write %x %x", + data->reg_num, data->val_in); + if (atl1c_write_phy_reg(&adapter->hw, + data->reg_num, data->val_in)) { + retval = -EIO; + goto out; + } + break; + + default: + retval = -EOPNOTSUPP; + break; + } +out: + spin_unlock_irqrestore(&adapter->mdio_lock, flags); + return retval; +} + +/* + * atl1c_ioctl - + * @netdev: + * @ifreq: + * @cmd: + */ +static int atl1c_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + return atl1c_mii_ioctl(netdev, ifr, cmd); + default: + return -EOPNOTSUPP; + } +} + +/* + * atl1c_alloc_queues - Allocate memory for all rings + * @adapter: board private structure to initialize + * + */ +static int __devinit atl1c_alloc_queues(struct atl1c_adapter *adapter) +{ + return 0; +} + +static void atl1c_set_mac_type(struct atl1c_hw *hw) +{ + switch (hw->device_id) { + case PCI_DEVICE_ID_ATTANSIC_L2C: + hw->nic_type = athr_l2c; + break; + + case PCI_DEVICE_ID_ATTANSIC_L1C: + hw->nic_type = athr_l1c; + break; + + default: + break; + } +} + +static int atl1c_setup_mac_funcs(struct atl1c_hw *hw) +{ + u32 phy_status_data; + u32 link_ctrl_data; + + atl1c_set_mac_type(hw); + AT_READ_REG(hw, REG_PHY_STATUS, &phy_status_data); + AT_READ_REG(hw, REG_LINK_CTRL, &link_ctrl_data); + + hw->ctrl_flags = ATL1C_INTR_CLEAR_ON_READ | + ATL1C_INTR_MODRT_ENABLE | + ATL1C_RX_IPV6_CHKSUM | + ATL1C_TXQ_MODE_ENHANCE; + if (link_ctrl_data & LINK_CTRL_L0S_EN) + hw->ctrl_flags |= ATL1C_ASPM_L0S_SUPPORT; + if (link_ctrl_data & LINK_CTRL_L1_EN) + hw->ctrl_flags |= ATL1C_ASPM_L1_SUPPORT; + + if (hw->nic_type == athr_l1c) { + hw->ctrl_flags |= ATL1C_ASPM_CTRL_MON; + hw->ctrl_flags |= ATL1C_LINK_CAP_1000M; + } + return 0; +} +/* + * atl1c_sw_init - Initialize general software structures (struct atl1c_adapter) + * @adapter: board private structure to initialize + * + * atl1c_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + */ +static int __devinit atl1c_sw_init(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + struct pci_dev *pdev = adapter->pdev; + + adapter->wol = 0; + adapter->link_speed = SPEED_0; + adapter->link_duplex = FULL_DUPLEX; + adapter->num_rx_queues = AT_DEF_RECEIVE_QUEUE; + adapter->tpd_ring[0].count = 1024; + adapter->rfd_ring[0].count = 512; + + hw->vendor_id = pdev->vendor; + hw->device_id = pdev->device; + hw->subsystem_vendor_id = pdev->subsystem_vendor; + hw->subsystem_id = pdev->subsystem_device; + + /* before link up, we assume hibernate is true */ + hw->hibernate = true; + hw->media_type = MEDIA_TYPE_AUTO_SENSOR; + if (atl1c_setup_mac_funcs(hw) != 0) { + dev_err(&pdev->dev, "set mac function pointers failed\n"); + return -1; + } + hw->intr_mask = IMR_NORMAL_MASK; + hw->phy_configured = false; + hw->preamble_len = 7; + hw->max_frame_size = adapter->netdev->mtu; + if (adapter->num_rx_queues < 2) { + hw->rss_type = atl1c_rss_disable; + hw->rss_mode = atl1c_rss_mode_disable; + } else { + hw->rss_type = atl1c_rss_ipv4; + hw->rss_mode = atl1c_rss_mul_que_mul_int; + hw->rss_hash_bits = 16; + } + hw->autoneg_advertised = ADVERTISED_Autoneg; + hw->indirect_tab = 0xE4E4E4E4; + hw->base_cpu = 0; + + hw->ict = 50000; /* 100ms */ + hw->smb_timer = 200000; /* 400ms */ + hw->cmb_tpd = 4; + hw->cmb_tx_timer = 1; /* 2 us */ + hw->rx_imt = 200; + hw->tx_imt = 1000; + + hw->tpd_burst = 5; + hw->rfd_burst = 8; + hw->dma_order = atl1c_dma_ord_out; + hw->dmar_block = atl1c_dma_req_1024; + hw->dmaw_block = atl1c_dma_req_1024; + hw->dmar_dly_cnt = 15; + hw->dmaw_dly_cnt = 4; + + if (atl1c_alloc_queues(adapter)) { + dev_err(&pdev->dev, "Unable to allocate memory for queues\n"); + return -ENOMEM; + } + /* TODO */ + atl1c_set_rxbufsize(adapter, adapter->netdev); + atomic_set(&adapter->irq_sem, 1); + spin_lock_init(&adapter->mdio_lock); + spin_lock_init(&adapter->tx_lock); + set_bit(__AT_DOWN, &adapter->flags); + + return 0; +} + +/* + * atl1c_clean_tx_ring - Free Tx-skb + * @adapter: board private structure + */ +static void atl1c_clean_tx_ring(struct atl1c_adapter *adapter, + enum atl1c_trans_queue type) +{ + struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; + struct atl1c_buffer *buffer_info; + struct pci_dev *pdev = adapter->pdev; + u16 index, ring_count; + + ring_count = tpd_ring->count; + for (index = 0; index < ring_count; index++) { + buffer_info = &tpd_ring->buffer_info[index]; + if (buffer_info->state == ATL1_BUFFER_FREE) + continue; + if (buffer_info->dma) + pci_unmap_single(pdev, buffer_info->dma, + buffer_info->length, + PCI_DMA_TODEVICE); + if (buffer_info->skb) + dev_kfree_skb(buffer_info->skb); + buffer_info->dma = 0; + buffer_info->skb = NULL; + buffer_info->state = ATL1_BUFFER_FREE; + } + + /* Zero out Tx-buffers */ + memset(tpd_ring->desc, 0, sizeof(struct atl1c_tpd_desc) * + ring_count); + atomic_set(&tpd_ring->next_to_clean, 0); + tpd_ring->next_to_use = 0; +} + +/* + * atl1c_clean_rx_ring - Free rx-reservation skbs + * @adapter: board private structure + */ +static void atl1c_clean_rx_ring(struct atl1c_adapter *adapter) +{ + struct atl1c_rfd_ring *rfd_ring = adapter->rfd_ring; + struct atl1c_rrd_ring *rrd_ring = adapter->rrd_ring; + struct atl1c_buffer *buffer_info; + struct pci_dev *pdev = adapter->pdev; + int i, j; + + for (i = 0; i < adapter->num_rx_queues; i++) { + for (j = 0; j < rfd_ring[i].count; j++) { + buffer_info = &rfd_ring[i].buffer_info[j]; + if (buffer_info->state == ATL1_BUFFER_FREE) + continue; + if (buffer_info->dma) + pci_unmap_single(pdev, buffer_info->dma, + buffer_info->length, + PCI_DMA_FROMDEVICE); + if (buffer_info->skb) + dev_kfree_skb(buffer_info->skb); + buffer_info->state = ATL1_BUFFER_FREE; + buffer_info->skb = NULL; + } + /* zero out the descriptor ring */ + memset(rfd_ring[i].desc, 0, rfd_ring[i].size); + rfd_ring[i].next_to_clean = 0; + rfd_ring[i].next_to_use = 0; + rrd_ring[i].next_to_use = 0; + rrd_ring[i].next_to_clean = 0; + } +} + +/* + * Read / Write Ptr Initialize: + */ +static void atl1c_init_ring_ptrs(struct atl1c_adapter *adapter) +{ + struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring; + struct atl1c_rfd_ring *rfd_ring = adapter->rfd_ring; + struct atl1c_rrd_ring *rrd_ring = adapter->rrd_ring; + struct atl1c_buffer *buffer_info; + int i, j; + + for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) { + tpd_ring[i].next_to_use = 0; + atomic_set(&tpd_ring[i].next_to_clean, 0); + buffer_info = tpd_ring[i].buffer_info; + for (j = 0; j < tpd_ring->count; j++) + buffer_info[i].state = ATL1_BUFFER_FREE; + } + for (i = 0; i < adapter->num_rx_queues; i++) { + rfd_ring[i].next_to_use = 0; + rfd_ring[i].next_to_clean = 0; + rrd_ring[i].next_to_use = 0; + rrd_ring[i].next_to_clean = 0; + for (j = 0; j < rfd_ring[i].count; j++) { + buffer_info = &rfd_ring[i].buffer_info[j]; + buffer_info->state = ATL1_BUFFER_FREE; + } + } +} + +/* + * atl1c_free_ring_resources - Free Tx / RX descriptor Resources + * @adapter: board private structure + * + * Free all transmit software resources + */ +static void atl1c_free_ring_resources(struct atl1c_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + + pci_free_consistent(pdev, adapter->ring_header.size, + adapter->ring_header.desc, + adapter->ring_header.dma); + adapter->ring_header.desc = NULL; + + /* Note: just free tdp_ring.buffer_info, + * it contain rfd_ring.buffer_info, do not double free */ + if (adapter->tpd_ring[0].buffer_info) { + kfree(adapter->tpd_ring[0].buffer_info); + adapter->tpd_ring[0].buffer_info = NULL; + } +} + +/* + * atl1c_setup_mem_resources - allocate Tx / RX descriptor resources + * @adapter: board private structure + * + * Return 0 on success, negative on failure + */ +static int atl1c_setup_ring_resources(struct atl1c_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring; + struct atl1c_rfd_ring *rfd_ring = adapter->rfd_ring; + struct atl1c_rrd_ring *rrd_ring = adapter->rrd_ring; + struct atl1c_ring_header *ring_header = &adapter->ring_header; + int num_rx_queues = adapter->num_rx_queues; + int size; + int i; + int count = 0; + int rx_desc_count = 0; + u32 offset = 0; + + rrd_ring[0].count = rfd_ring[0].count; + for (i = 1; i < AT_MAX_TRANSMIT_QUEUE; i++) + tpd_ring[i].count = tpd_ring[0].count; + + for (i = 1; i < adapter->num_rx_queues; i++) + rfd_ring[i].count = rrd_ring[i].count = rfd_ring[0].count; + + /* 2 tpd queue, one high priority queue, + * another normal priority queue */ + size = sizeof(struct atl1c_buffer) * (tpd_ring->count * 2 + + rfd_ring->count * num_rx_queues); + tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); + if (unlikely(!tpd_ring->buffer_info)) { + dev_err(&pdev->dev, "kzalloc failed, size = %d\n", + size); + goto err_nomem; + } + for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) { + tpd_ring[i].buffer_info = + (struct atl1c_buffer *) (tpd_ring->buffer_info + count); + count += tpd_ring[i].count; + } + + for (i = 0; i < num_rx_queues; i++) { + rfd_ring[i].buffer_info = + (struct atl1c_buffer *) (tpd_ring->buffer_info + count); + count += rfd_ring[i].count; + rx_desc_count += rfd_ring[i].count; + } + /* + * real ring DMA buffer + * each ring/block may need up to 8 bytes for alignment, hence the + * additional bytes tacked onto the end. + */ + ring_header->size = size = + sizeof(struct atl1c_tpd_desc) * tpd_ring->count * 2 + + sizeof(struct atl1c_rx_free_desc) * rx_desc_count + + sizeof(struct atl1c_recv_ret_status) * rx_desc_count + + sizeof(struct atl1c_hw_stats) + + 8 * 4 + 8 * 2 * num_rx_queues; + + ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, + &ring_header->dma); + if (unlikely(!ring_header->desc)) { + dev_err(&pdev->dev, "pci_alloc_consistend failed\n"); + goto err_nomem; + } + memset(ring_header->desc, 0, ring_header->size); + /* init TPD ring */ + + tpd_ring[0].dma = roundup(ring_header->dma, 8); + offset = tpd_ring[0].dma - ring_header->dma; + for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) { + tpd_ring[i].dma = ring_header->dma + offset; + tpd_ring[i].desc = (u8 *) ring_header->desc + offset; + tpd_ring[i].size = + sizeof(struct atl1c_tpd_desc) * tpd_ring[i].count; + offset += roundup(tpd_ring[i].size, 8); + } + /* init RFD ring */ + for (i = 0; i < num_rx_queues; i++) { + rfd_ring[i].dma = ring_header->dma + offset; + rfd_ring[i].desc = (u8 *) ring_header->desc + offset; + rfd_ring[i].size = sizeof(struct atl1c_rx_free_desc) * + rfd_ring[i].count; + offset += roundup(rfd_ring[i].size, 8); + } + + /* init RRD ring */ + for (i = 0; i < num_rx_queues; i++) { + rrd_ring[i].dma = ring_header->dma + offset; + rrd_ring[i].desc = (u8 *) ring_header->desc + offset; + rrd_ring[i].size = sizeof(struct atl1c_recv_ret_status) * + rrd_ring[i].count; + offset += roundup(rrd_ring[i].size, 8); + } + + adapter->smb.dma = ring_header->dma + offset; + adapter->smb.smb = (u8 *)ring_header->desc + offset; + return 0; + +err_nomem: + kfree(tpd_ring->buffer_info); + return -ENOMEM; +} + +static void atl1c_configure_des_ring(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + struct atl1c_rfd_ring *rfd_ring = (struct atl1c_rfd_ring *) + adapter->rfd_ring; + struct atl1c_rrd_ring *rrd_ring = (struct atl1c_rrd_ring *) + adapter->rrd_ring; + struct atl1c_tpd_ring *tpd_ring = (struct atl1c_tpd_ring *) + adapter->tpd_ring; + struct atl1c_cmb *cmb = (struct atl1c_cmb *) &adapter->cmb; + struct atl1c_smb *smb = (struct atl1c_smb *) &adapter->smb; + int i; + + /* TPD */ + AT_WRITE_REG(hw, REG_TX_BASE_ADDR_HI, + (u32)((tpd_ring[atl1c_trans_normal].dma & + AT_DMA_HI_ADDR_MASK) >> 32)); + /* just enable normal priority TX queue */ + AT_WRITE_REG(hw, REG_NTPD_HEAD_ADDR_LO, + (u32)(tpd_ring[atl1c_trans_normal].dma & + AT_DMA_LO_ADDR_MASK)); + AT_WRITE_REG(hw, REG_HTPD_HEAD_ADDR_LO, + (u32)(tpd_ring[atl1c_trans_high].dma & + AT_DMA_LO_ADDR_MASK)); + AT_WRITE_REG(hw, REG_TPD_RING_SIZE, + (u32)(tpd_ring[0].count & TPD_RING_SIZE_MASK)); + + + /* RFD */ + AT_WRITE_REG(hw, REG_RX_BASE_ADDR_HI, + (u32)((rfd_ring[0].dma & AT_DMA_HI_ADDR_MASK) >> 32)); + for (i = 0; i < adapter->num_rx_queues; i++) + AT_WRITE_REG(hw, atl1c_rfd_addr_lo_regs[i], + (u32)(rfd_ring[i].dma & AT_DMA_LO_ADDR_MASK)); + + AT_WRITE_REG(hw, REG_RFD_RING_SIZE, + rfd_ring[0].count & RFD_RING_SIZE_MASK); + AT_WRITE_REG(hw, REG_RX_BUF_SIZE, + adapter->rx_buffer_len & RX_BUF_SIZE_MASK); + + /* RRD */ + for (i = 0; i < adapter->num_rx_queues; i++) + AT_WRITE_REG(hw, atl1c_rrd_addr_lo_regs[i], + (u32)(rrd_ring[i].dma & AT_DMA_LO_ADDR_MASK)); + AT_WRITE_REG(hw, REG_RRD_RING_SIZE, + (rrd_ring[0].count & RRD_RING_SIZE_MASK)); + + /* CMB */ + AT_WRITE_REG(hw, REG_CMB_BASE_ADDR_LO, cmb->dma & AT_DMA_LO_ADDR_MASK); + + /* SMB */ + AT_WRITE_REG(hw, REG_SMB_BASE_ADDR_HI, + (u32)((smb->dma & AT_DMA_HI_ADDR_MASK) >> 32)); + AT_WRITE_REG(hw, REG_SMB_BASE_ADDR_LO, + (u32)(smb->dma & AT_DMA_LO_ADDR_MASK)); + /* Load all of base address above */ + AT_WRITE_REG(hw, REG_LOAD_PTR, 1); +} + +static void atl1c_configure_tx(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + u32 dev_ctrl_data; + u32 max_pay_load; + u16 tx_offload_thresh; + u32 txq_ctrl_data; + u32 extra_size = 0; /* Jumbo frame threshold in QWORD unit */ + + extra_size = ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN; + tx_offload_thresh = MAX_TX_OFFLOAD_THRESH; + AT_WRITE_REG(hw, REG_TX_TSO_OFFLOAD_THRESH, + (tx_offload_thresh >> 3) & TX_TSO_OFFLOAD_THRESH_MASK); + AT_READ_REG(hw, REG_DEVICE_CTRL, &dev_ctrl_data); + max_pay_load = (dev_ctrl_data >> DEVICE_CTRL_MAX_PAYLOAD_SHIFT) & + DEVICE_CTRL_MAX_PAYLOAD_MASK; + hw->dmaw_block = min(max_pay_load, hw->dmaw_block); + max_pay_load = (dev_ctrl_data >> DEVICE_CTRL_MAX_RREQ_SZ_SHIFT) & + DEVICE_CTRL_MAX_RREQ_SZ_MASK; + hw->dmar_block = min(max_pay_load, hw->dmar_block); + + txq_ctrl_data = (hw->tpd_burst & TXQ_NUM_TPD_BURST_MASK) << + TXQ_NUM_TPD_BURST_SHIFT; + if (hw->ctrl_flags & ATL1C_TXQ_MODE_ENHANCE) + txq_ctrl_data |= TXQ_CTRL_ENH_MODE; + txq_ctrl_data |= (atl1c_pay_load_size[hw->dmar_block] & + TXQ_TXF_BURST_NUM_MASK) << TXQ_TXF_BURST_NUM_SHIFT; + + AT_WRITE_REG(hw, REG_TXQ_CTRL, txq_ctrl_data); +} + +static void atl1c_configure_rx(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + u32 rxq_ctrl_data; + + rxq_ctrl_data = (hw->rfd_burst & RXQ_RFD_BURST_NUM_MASK) << + RXQ_RFD_BURST_NUM_SHIFT; + + if (hw->ctrl_flags & ATL1C_RX_IPV6_CHKSUM) + rxq_ctrl_data |= IPV6_CHKSUM_CTRL_EN; + if (hw->rss_type == atl1c_rss_ipv4) + rxq_ctrl_data |= RSS_HASH_IPV4; + if (hw->rss_type == atl1c_rss_ipv4_tcp) + rxq_ctrl_data |= RSS_HASH_IPV4_TCP; + if (hw->rss_type == atl1c_rss_ipv6) + rxq_ctrl_data |= RSS_HASH_IPV6; + if (hw->rss_type == atl1c_rss_ipv6_tcp) + rxq_ctrl_data |= RSS_HASH_IPV6_TCP; + if (hw->rss_type != atl1c_rss_disable) + rxq_ctrl_data |= RRS_HASH_CTRL_EN; + + rxq_ctrl_data |= (hw->rss_mode & RSS_MODE_MASK) << + RSS_MODE_SHIFT; + rxq_ctrl_data |= (hw->rss_hash_bits & RSS_HASH_BITS_MASK) << + RSS_HASH_BITS_SHIFT; + if (hw->ctrl_flags & ATL1C_ASPM_CTRL_MON) + rxq_ctrl_data |= (ASPM_THRUPUT_LIMIT_100M & + ASPM_THRUPUT_LIMIT_MASK) << ASPM_THRUPUT_LIMIT_SHIFT; + + AT_WRITE_REG(hw, REG_RXQ_CTRL, rxq_ctrl_data); +} + +static void atl1c_configure_rss(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + + AT_WRITE_REG(hw, REG_IDT_TABLE, hw->indirect_tab); + AT_WRITE_REG(hw, REG_BASE_CPU_NUMBER, hw->base_cpu); +} + +static void atl1c_configure_dma(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + u32 dma_ctrl_data; + + dma_ctrl_data = DMA_CTRL_DMAR_REQ_PRI; + if (hw->ctrl_flags & ATL1C_CMB_ENABLE) + dma_ctrl_data |= DMA_CTRL_CMB_EN; + if (hw->ctrl_flags & ATL1C_SMB_ENABLE) + dma_ctrl_data |= DMA_CTRL_SMB_EN; + else + dma_ctrl_data |= MAC_CTRL_SMB_DIS; + + switch (hw->dma_order) { + case atl1c_dma_ord_in: + dma_ctrl_data |= DMA_CTRL_DMAR_IN_ORDER; + break; + case atl1c_dma_ord_enh: + dma_ctrl_data |= DMA_CTRL_DMAR_ENH_ORDER; + break; + case atl1c_dma_ord_out: + dma_ctrl_data |= DMA_CTRL_DMAR_OUT_ORDER; + break; + default: + break; + } + + dma_ctrl_data |= (((u32)hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK) + << DMA_CTRL_DMAR_BURST_LEN_SHIFT; + dma_ctrl_data |= (((u32)hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK) + << DMA_CTRL_DMAW_BURST_LEN_SHIFT; + dma_ctrl_data |= (((u32)hw->dmar_dly_cnt) & DMA_CTRL_DMAR_DLY_CNT_MASK) + << DMA_CTRL_DMAR_DLY_CNT_SHIFT; + dma_ctrl_data |= (((u32)hw->dmaw_dly_cnt) & DMA_CTRL_DMAW_DLY_CNT_MASK) + << DMA_CTRL_DMAW_DLY_CNT_SHIFT; + + AT_WRITE_REG(hw, REG_DMA_CTRL, dma_ctrl_data); +} + +/* + * Stop the mac, transmit and receive units + * hw - Struct containing variables accessed by shared code + * return : 0 or idle status (if error) + */ +static int atl1c_stop_mac(struct atl1c_hw *hw) +{ + u32 data; + int timeout; + + AT_READ_REG(hw, REG_RXQ_CTRL, &data); + data &= ~(RXQ1_CTRL_EN | RXQ2_CTRL_EN | + RXQ3_CTRL_EN | RXQ_CTRL_EN); + AT_WRITE_REG(hw, REG_RXQ_CTRL, data); + + AT_READ_REG(hw, REG_TXQ_CTRL, &data); + data &= ~TXQ_CTRL_EN; + AT_WRITE_REG(hw, REG_TWSI_CTRL, data); + + for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) { + AT_READ_REG(hw, REG_IDLE_STATUS, &data); + if ((data & (IDLE_STATUS_RXQ_NO_IDLE | + IDLE_STATUS_TXQ_NO_IDLE)) == 0) + break; + msleep(1); + } + + AT_READ_REG(hw, REG_MAC_CTRL, &data); + data &= ~(MAC_CTRL_TX_EN | MAC_CTRL_RX_EN); + AT_WRITE_REG(hw, REG_MAC_CTRL, data); + + for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) { + AT_READ_REG(hw, REG_IDLE_STATUS, &data); + if ((data & IDLE_STATUS_MASK) == 0) + return 0; + msleep(1); + } + return data; +} + +static void atl1c_enable_rx_ctrl(struct atl1c_hw *hw) +{ + u32 data; + + AT_READ_REG(hw, REG_RXQ_CTRL, &data); + switch (hw->adapter->num_rx_queues) { + case 4: + data |= (RXQ3_CTRL_EN | RXQ2_CTRL_EN | RXQ1_CTRL_EN); + break; + case 3: + data |= (RXQ2_CTRL_EN | RXQ1_CTRL_EN); + break; + case 2: + data |= RXQ1_CTRL_EN; + break; + default: + break; + } + data |= RXQ_CTRL_EN; + AT_WRITE_REG(hw, REG_RXQ_CTRL, data); +} + +static void atl1c_enable_tx_ctrl(struct atl1c_hw *hw) +{ + u32 data; + + AT_READ_REG(hw, REG_TXQ_CTRL, &data); + data |= TXQ_CTRL_EN; + AT_WRITE_REG(hw, REG_TXQ_CTRL, data); +} + +/* + * Reset the transmit and receive units; mask and clear all interrupts. + * hw - Struct containing variables accessed by shared code + * return : 0 or idle status (if error) + */ +static int atl1c_reset_mac(struct atl1c_hw *hw) +{ + struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter; + struct pci_dev *pdev = adapter->pdev; + u32 idle_status_data = 0; + int timeout = 0; + int ret; + + AT_WRITE_REG(hw, REG_IMR, 0); + AT_WRITE_REG(hw, REG_ISR, ISR_DIS_INT); + + ret = atl1c_stop_mac(hw); + if (ret) + return ret; + /* + * Issue Soft Reset to the MAC. This will reset the chip's + * transmit, receive, DMA. It will not effect + * the current PCI configuration. The global reset bit is self- + * clearing, and should clear within a microsecond. + */ + AT_WRITE_REGW(hw, REG_MASTER_CTRL, MASTER_CTRL_SOFT_RST); + AT_WRITE_FLUSH(hw); + msleep(10); + /* Wait at least 10ms for All module to be Idle */ + for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) { + AT_READ_REG(hw, REG_IDLE_STATUS, &idle_status_data); + if ((idle_status_data & IDLE_STATUS_MASK) == 0) + break; + msleep(1); + } + if (timeout >= AT_HW_MAX_IDLE_DELAY) { + dev_err(&pdev->dev, + "MAC state machine cann't be idle since" + " disabled for 10ms second\n"); + return -1; + } + return 0; +} + +static void atl1c_disable_l0s_l1(struct atl1c_hw *hw) +{ + u32 pm_ctrl_data; + + AT_READ_REG(hw, REG_PM_CTRL, &pm_ctrl_data); + pm_ctrl_data &= ~(PM_CTRL_L1_ENTRY_TIMER_MASK << + PM_CTRL_L1_ENTRY_TIMER_SHIFT); + pm_ctrl_data &= ~PM_CTRL_CLK_SWH_L1; + pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN; + pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN; + pm_ctrl_data &= ~PM_CTRL_MAC_ASPM_CHK; + pm_ctrl_data &= ~PM_CTRL_SERDES_PD_EX_L1; + + pm_ctrl_data |= PM_CTRL_SERDES_BUDS_RX_L1_EN; + pm_ctrl_data |= PM_CTRL_SERDES_PLL_L1_EN; + pm_ctrl_data |= PM_CTRL_SERDES_L1_EN; + AT_WRITE_REG(hw, REG_PM_CTRL, pm_ctrl_data); +} + +/* + * Set ASPM state. + * Enable/disable L0s/L1 depend on link state. + */ +static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup) +{ + u32 pm_ctrl_data; + + AT_READ_REG(hw, REG_PM_CTRL, &pm_ctrl_data); + + pm_ctrl_data &= PM_CTRL_SERDES_PD_EX_L1; + pm_ctrl_data |= ~PM_CTRL_SERDES_BUDS_RX_L1_EN; + pm_ctrl_data |= ~PM_CTRL_SERDES_L1_EN; + pm_ctrl_data &= ~(PM_CTRL_L1_ENTRY_TIMER_MASK << + PM_CTRL_L1_ENTRY_TIMER_SHIFT); + + pm_ctrl_data |= PM_CTRL_MAC_ASPM_CHK; + + if (linkup) { + pm_ctrl_data |= PM_CTRL_SERDES_PLL_L1_EN; + pm_ctrl_data &= ~PM_CTRL_CLK_SWH_L1; + + if (hw->ctrl_flags & ATL1C_ASPM_L1_SUPPORT) { + pm_ctrl_data |= AT_ASPM_L1_TIMER << + PM_CTRL_L1_ENTRY_TIMER_SHIFT; + pm_ctrl_data |= PM_CTRL_ASPM_L1_EN; + } else + pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN; + + if (hw->ctrl_flags & ATL1C_ASPM_L0S_SUPPORT) + pm_ctrl_data |= PM_CTRL_ASPM_L0S_EN; + else + pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN; + + } else { + pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN; + pm_ctrl_data &= ~PM_CTRL_SERDES_PLL_L1_EN; + + pm_ctrl_data |= PM_CTRL_CLK_SWH_L1; + + if (hw->ctrl_flags & ATL1C_ASPM_L1_SUPPORT) + pm_ctrl_data |= PM_CTRL_ASPM_L1_EN; + else + pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN; + } + + AT_WRITE_REG(hw, REG_PM_CTRL, pm_ctrl_data); +} + +static void atl1c_setup_mac_ctrl(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 mac_ctrl_data; + + mac_ctrl_data = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN; + mac_ctrl_data |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW); + + if (adapter->link_duplex == FULL_DUPLEX) { + hw->mac_duplex = true; + mac_ctrl_data |= MAC_CTRL_DUPLX; + } + + if (adapter->link_speed == SPEED_1000) + hw->mac_speed = atl1c_mac_speed_1000; + else + hw->mac_speed = atl1c_mac_speed_10_100; + + mac_ctrl_data |= (hw->mac_speed & MAC_CTRL_SPEED_MASK) << + MAC_CTRL_SPEED_SHIFT; + + mac_ctrl_data |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD); + mac_ctrl_data |= ((hw->preamble_len & MAC_CTRL_PRMLEN_MASK) << + MAC_CTRL_PRMLEN_SHIFT); + + if (adapter->vlgrp) + mac_ctrl_data |= MAC_CTRL_RMV_VLAN; + + mac_ctrl_data |= MAC_CTRL_BC_EN; + if (netdev->flags & IFF_PROMISC) + mac_ctrl_data |= MAC_CTRL_PROMIS_EN; + if (netdev->flags & IFF_ALLMULTI) + mac_ctrl_data |= MAC_CTRL_MC_ALL_EN; + + mac_ctrl_data |= MAC_CTRL_SINGLE_PAUSE_EN; + AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); +} + +/* + * atl1c_configure - Configure Transmit&Receive Unit after Reset + * @adapter: board private structure + * + * Configure the Tx /Rx unit of the MAC after a reset. + */ +static int atl1c_configure(struct atl1c_adapter *adapter) +{ + struct atl1c_hw *hw = &adapter->hw; + u32 master_ctrl_data = 0; + u32 intr_modrt_data; + + /* clear interrupt status */ + AT_WRITE_REG(hw, REG_ISR, 0xFFFFFFFF); + /* Clear any WOL status */ + AT_WRITE_REG(hw, REG_WOL_CTRL, 0); + /* set Interrupt Clear Timer + * HW will enable self to assert interrupt event to system after + * waiting x-time for software to notify it accept interrupt. + */ + AT_WRITE_REG(hw, REG_INT_RETRIG_TIMER, + hw->ict & INT_RETRIG_TIMER_MASK); + + atl1c_configure_des_ring(adapter); + + if (hw->ctrl_flags & ATL1C_INTR_MODRT_ENABLE) { + intr_modrt_data = (hw->tx_imt & IRQ_MODRT_TIMER_MASK) << + IRQ_MODRT_TX_TIMER_SHIFT; + intr_modrt_data |= (hw->rx_imt & IRQ_MODRT_TIMER_MASK) << + IRQ_MODRT_RX_TIMER_SHIFT; + AT_WRITE_REG(hw, REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data); + master_ctrl_data |= + MASTER_CTRL_TX_ITIMER_EN | MASTER_CTRL_RX_ITIMER_EN; + } + + if (hw->ctrl_flags & ATL1C_INTR_CLEAR_ON_READ) + master_ctrl_data |= MASTER_CTRL_INT_RDCLR; + + AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data); + + if (hw->ctrl_flags & ATL1C_CMB_ENABLE) { + AT_WRITE_REG(hw, REG_CMB_TPD_THRESH, + hw->cmb_tpd & CMB_TPD_THRESH_MASK); + AT_WRITE_REG(hw, REG_CMB_TX_TIMER, + hw->cmb_tx_timer & CMB_TX_TIMER_MASK); + } + + if (hw->ctrl_flags & ATL1C_SMB_ENABLE) + AT_WRITE_REG(hw, REG_SMB_STAT_TIMER, + hw->smb_timer & SMB_STAT_TIMER_MASK); + /* set MTU */ + AT_WRITE_REG(hw, REG_MTU, hw->max_frame_size + ETH_HLEN + + VLAN_HLEN + ETH_FCS_LEN); + /* HDS, disable */ + AT_WRITE_REG(hw, REG_HDS_CTRL, 0); + + atl1c_configure_tx(adapter); + atl1c_configure_rx(adapter); + atl1c_configure_rss(adapter); + atl1c_configure_dma(adapter); + + return 0; +} + +static void atl1c_update_hw_stats(struct atl1c_adapter *adapter) +{ + u16 hw_reg_addr = 0; + unsigned long *stats_item = NULL; + u32 data; + + /* update rx status */ + hw_reg_addr = REG_MAC_RX_STATUS_BIN; + stats_item = &adapter->hw_stats.rx_ok; + while (hw_reg_addr <= REG_MAC_RX_STATUS_END) { + AT_READ_REG(&adapter->hw, hw_reg_addr, &data); + *stats_item += data; + stats_item++; + hw_reg_addr += 4; + } +/* update tx status */ + hw_reg_addr = REG_MAC_TX_STATUS_BIN; + stats_item = &adapter->hw_stats.tx_ok; + while (hw_reg_addr <= REG_MAC_TX_STATUS_END) { + AT_READ_REG(&adapter->hw, hw_reg_addr, &data); + *stats_item += data; + stats_item++; + hw_reg_addr += 4; + } +} + +/* + * atl1c_get_stats - Get System Network Statistics + * @netdev: network interface device structure + * + * Returns the address of the device statistics structure. + * The statistics are actually updated from the timer callback. + */ +static struct net_device_stats *atl1c_get_stats(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct atl1c_hw_stats *hw_stats = &adapter->hw_stats; + struct net_device_stats *net_stats = &adapter->net_stats; + + atl1c_update_hw_stats(adapter); + net_stats->rx_packets = hw_stats->rx_ok; + net_stats->tx_packets = hw_stats->tx_ok; + net_stats->rx_bytes = hw_stats->rx_byte_cnt; + net_stats->tx_bytes = hw_stats->tx_byte_cnt; + net_stats->multicast = hw_stats->rx_mcast; + net_stats->collisions = hw_stats->tx_1_col + + hw_stats->tx_2_col * 2 + + hw_stats->tx_late_col + hw_stats->tx_abort_col; + net_stats->rx_errors = hw_stats->rx_frag + hw_stats->rx_fcs_err + + hw_stats->rx_len_err + hw_stats->rx_sz_ov + + hw_stats->rx_rrd_ov + hw_stats->rx_align_err; + net_stats->rx_fifo_errors = hw_stats->rx_rxf_ov; + net_stats->rx_length_errors = hw_stats->rx_len_err; + net_stats->rx_crc_errors = hw_stats->rx_fcs_err; + net_stats->rx_frame_errors = hw_stats->rx_align_err; + net_stats->rx_over_errors = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov; + + net_stats->rx_missed_errors = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov; + + net_stats->tx_errors = hw_stats->tx_late_col + hw_stats->tx_abort_col + + hw_stats->tx_underrun + hw_stats->tx_trunc; + net_stats->tx_fifo_errors = hw_stats->tx_underrun; + net_stats->tx_aborted_errors = hw_stats->tx_abort_col; + net_stats->tx_window_errors = hw_stats->tx_late_col; + + return &adapter->net_stats; +} + +static inline void atl1c_clear_phy_int(struct atl1c_adapter *adapter) +{ + u16 phy_data; + + spin_lock(&adapter->mdio_lock); + atl1c_read_phy_reg(&adapter->hw, MII_ISR, &phy_data); + spin_unlock(&adapter->mdio_lock); +} + +static bool atl1c_clean_tx_irq(struct atl1c_adapter *adapter, + enum atl1c_trans_queue type) +{ + struct atl1c_tpd_ring *tpd_ring = (struct atl1c_tpd_ring *) + &adapter->tpd_ring[type]; + struct atl1c_buffer *buffer_info; + u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean); + u16 hw_next_to_clean; + u16 shift; + u32 data; + + if (type == atl1c_trans_high) + shift = MB_HTPD_CONS_IDX_SHIFT; + else + shift = MB_NTPD_CONS_IDX_SHIFT; + + AT_READ_REG(&adapter->hw, REG_MB_PRIO_CONS_IDX, &data); + hw_next_to_clean = (data >> shift) & MB_PRIO_PROD_IDX_MASK; + + while (next_to_clean != hw_next_to_clean) { + buffer_info = &tpd_ring->buffer_info[next_to_clean]; + if (buffer_info->state == ATL1_BUFFER_BUSY) { + pci_unmap_page(adapter->pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_TODEVICE); + buffer_info->dma = 0; + if (buffer_info->skb) { + dev_kfree_skb_irq(buffer_info->skb); + buffer_info->skb = NULL; + } + buffer_info->state = ATL1_BUFFER_FREE; + } + if (++next_to_clean == tpd_ring->count) + next_to_clean = 0; + atomic_set(&tpd_ring->next_to_clean, next_to_clean); + } + + if (netif_queue_stopped(adapter->netdev) && + netif_carrier_ok(adapter->netdev)) { + netif_wake_queue(adapter->netdev); + } + + return true; +} + +/* + * atl1c_intr - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + * @pt_regs: CPU registers structure + */ +static irqreturn_t atl1c_intr(int irq, void *data) +{ + struct net_device *netdev = data; + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct pci_dev *pdev = adapter->pdev; + struct atl1c_hw *hw = &adapter->hw; + int max_ints = AT_MAX_INT_WORK; + int handled = IRQ_NONE; + u32 status; + u32 reg_data; + + do { + AT_READ_REG(hw, REG_ISR, ®_data); + status = reg_data & hw->intr_mask; + + if (status == 0 || (status & ISR_DIS_INT) != 0) { + if (max_ints != AT_MAX_INT_WORK) + handled = IRQ_HANDLED; + break; + } + /* link event */ + if (status & ISR_GPHY) + atl1c_clear_phy_int(adapter); + /* Ack ISR */ + AT_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT); + if (status & ISR_RX_PKT) { + if (likely(napi_schedule_prep(&adapter->napi))) { + hw->intr_mask &= ~ISR_RX_PKT; + AT_WRITE_REG(hw, REG_IMR, hw->intr_mask); + __napi_schedule(&adapter->napi); + } + } + if (status & ISR_TX_PKT) + atl1c_clean_tx_irq(adapter, atl1c_trans_normal); + + handled = IRQ_HANDLED; + /* check if PCIE PHY Link down */ + if (status & ISR_ERROR) { + if (netif_msg_hw(adapter)) + dev_err(&pdev->dev, + "atl1c hardware error (status = 0x%x)\n", + status & ISR_ERROR); + /* reset MAC */ + hw->intr_mask &= ~ISR_ERROR; + AT_WRITE_REG(hw, REG_IMR, hw->intr_mask); + schedule_work(&adapter->reset_task); + break; + } + + if (status & ISR_OVER) + if (netif_msg_intr(adapter)) + dev_warn(&pdev->dev, + "TX/RX over flow (status = 0x%x)\n", + status & ISR_OVER); + + /* link event */ + if (status & (ISR_GPHY | ISR_MANUAL)) { + adapter->net_stats.tx_carrier_errors++; + atl1c_link_chg_event(adapter); + break; + } + + } while (--max_ints > 0); + /* re-enable Interrupt*/ + AT_WRITE_REG(&adapter->hw, REG_ISR, 0); + return handled; +} + +static inline void atl1c_rx_checksum(struct atl1c_adapter *adapter, + struct sk_buff *skb, struct atl1c_recv_ret_status *prrs) +{ + /* + * The pid field in RRS in not correct sometimes, so we + * cannot figure out if the packet is fragmented or not, + * so we tell the KERNEL CHECKSUM_NONE + */ + skb->ip_summed = CHECKSUM_NONE; +} + +static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter, const int ringid) +{ + struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring[ringid]; + struct pci_dev *pdev = adapter->pdev; + struct atl1c_buffer *buffer_info, *next_info; + struct sk_buff *skb; + void *vir_addr = NULL; + u16 num_alloc = 0; + u16 rfd_next_to_use, next_next; + struct atl1c_rx_free_desc *rfd_desc; + + next_next = rfd_next_to_use = rfd_ring->next_to_use; + if (++next_next == rfd_ring->count) + next_next = 0; + buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; + next_info = &rfd_ring->buffer_info[next_next]; + + while (next_info->state == ATL1_BUFFER_FREE) { + rfd_desc = ATL1C_RFD_DESC(rfd_ring, rfd_next_to_use); + + skb = dev_alloc_skb(adapter->rx_buffer_len); + if (unlikely(!skb)) { + if (netif_msg_rx_err(adapter)) + dev_warn(&pdev->dev, "alloc rx buffer failed\n"); + break; + } + + /* + * Make buffer alignment 2 beyond a 16 byte boundary + * this will result in a 16 byte aligned IP header after + * the 14 byte MAC header is removed + */ + vir_addr = skb->data; + buffer_info->state = ATL1_BUFFER_BUSY; + buffer_info->skb = skb; + buffer_info->length = adapter->rx_buffer_len; + buffer_info->dma = pci_map_single(pdev, vir_addr, + buffer_info->length, + PCI_DMA_FROMDEVICE); + rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma); + rfd_next_to_use = next_next; + if (++next_next == rfd_ring->count) + next_next = 0; + buffer_info = &rfd_ring->buffer_info[rfd_next_to_use]; + next_info = &rfd_ring->buffer_info[next_next]; + num_alloc++; + } + + if (num_alloc) { + /* TODO: update mailbox here */ + wmb(); + rfd_ring->next_to_use = rfd_next_to_use; + AT_WRITE_REG(&adapter->hw, atl1c_rfd_prod_idx_regs[ringid], + rfd_ring->next_to_use & MB_RFDX_PROD_IDX_MASK); + } + + return num_alloc; +} + +static void atl1c_clean_rrd(struct atl1c_rrd_ring *rrd_ring, + struct atl1c_recv_ret_status *rrs, u16 num) +{ + u16 i; + /* the relationship between rrd and rfd is one map one */ + for (i = 0; i < num; i++, rrs = ATL1C_RRD_DESC(rrd_ring, + rrd_ring->next_to_clean)) { + rrs->word3 &= ~RRS_RXD_UPDATED; + if (++rrd_ring->next_to_clean == rrd_ring->count) + rrd_ring->next_to_clean = 0; + } +} + +static void atl1c_clean_rfd(struct atl1c_rfd_ring *rfd_ring, + struct atl1c_recv_ret_status *rrs, u16 num) +{ + u16 i; + u16 rfd_index; + struct atl1c_buffer *buffer_info = rfd_ring->buffer_info; + + rfd_index = (rrs->word0 >> RRS_RX_RFD_INDEX_SHIFT) & + RRS_RX_RFD_INDEX_MASK; + for (i = 0; i < num; i++) { + buffer_info[rfd_index].skb = NULL; + buffer_info[rfd_index].state = ATL1_BUFFER_FREE; + if (++rfd_index == rfd_ring->count) + rfd_index = 0; + } + rfd_ring->next_to_clean = rfd_index; +} + +static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter, u8 que, + int *work_done, int work_to_do) +{ + u16 rfd_num, rfd_index; + u16 count = 0; + u16 length; + struct pci_dev *pdev = adapter->pdev; + struct net_device *netdev = adapter->netdev; + struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring[que]; + struct atl1c_rrd_ring *rrd_ring = &adapter->rrd_ring[que]; + struct sk_buff *skb; + struct atl1c_recv_ret_status *rrs; + struct atl1c_buffer *buffer_info; + + while (1) { + if (*work_done >= work_to_do) + break; + rrs = ATL1C_RRD_DESC(rrd_ring, rrd_ring->next_to_clean); + if (likely(RRS_RXD_IS_VALID(rrs->word3))) { + rfd_num = (rrs->word0 >> RRS_RX_RFD_CNT_SHIFT) & + RRS_RX_RFD_CNT_MASK; + if (unlikely(rfd_num) != 1) + /* TODO support mul rfd*/ + if (netif_msg_rx_err(adapter)) + dev_warn(&pdev->dev, + "Multi rfd not support yet!\n"); + goto rrs_checked; + } else { + break; + } +rrs_checked: + atl1c_clean_rrd(rrd_ring, rrs, rfd_num); + if (rrs->word3 & (RRS_RX_ERR_SUM | RRS_802_3_LEN_ERR)) { + atl1c_clean_rfd(rfd_ring, rrs, rfd_num); + if (netif_msg_rx_err(adapter)) + dev_warn(&pdev->dev, + "wrong packet! rrs word3 is %x\n", + rrs->word3); + continue; + } + + length = le16_to_cpu((rrs->word3 >> RRS_PKT_SIZE_SHIFT) & + RRS_PKT_SIZE_MASK); + /* Good Receive */ + if (likely(rfd_num == 1)) { + rfd_index = (rrs->word0 >> RRS_RX_RFD_INDEX_SHIFT) & + RRS_RX_RFD_INDEX_MASK; + buffer_info = &rfd_ring->buffer_info[rfd_index]; + pci_unmap_single(pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_FROMDEVICE); + skb = buffer_info->skb; + } else { + /* TODO */ + if (netif_msg_rx_err(adapter)) + dev_warn(&pdev->dev, + "Multi rfd not support yet!\n"); + break; + } + atl1c_clean_rfd(rfd_ring, rrs, rfd_num); + skb_put(skb, length - ETH_FCS_LEN); + skb->protocol = eth_type_trans(skb, netdev); + skb->dev = netdev; + atl1c_rx_checksum(adapter, skb, rrs); + if (unlikely(adapter->vlgrp) && rrs->word3 & RRS_VLAN_INS) { + u16 vlan; + + AT_TAG_TO_VLAN(rrs->vlan_tag, vlan); + vlan = le16_to_cpu(vlan); + vlan_hwaccel_receive_skb(skb, adapter->vlgrp, vlan); + } else + netif_receive_skb(skb); + + netdev->last_rx = jiffies; + (*work_done)++; + count++; + } + if (count) + atl1c_alloc_rx_buffer(adapter, que); +} + +/* + * atl1c_clean - NAPI Rx polling callback + * @adapter: board private structure + */ +static int atl1c_clean(struct napi_struct *napi, int budget) +{ + struct atl1c_adapter *adapter = + container_of(napi, struct atl1c_adapter, napi); + int work_done = 0; + + /* Keep link state information with original netdev */ + if (!netif_carrier_ok(adapter->netdev)) + goto quit_polling; + /* just enable one RXQ */ + atl1c_clean_rx_irq(adapter, 0, &work_done, budget); + + if (work_done < budget) { +quit_polling: + napi_complete(napi); + adapter->hw.intr_mask |= ISR_RX_PKT; + AT_WRITE_REG(&adapter->hw, REG_IMR, adapter->hw.intr_mask); + } + return work_done; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER + +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void atl1c_netpoll(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + + disable_irq(adapter->pdev->irq); + atl1c_intr(adapter->pdev->irq, netdev); + enable_irq(adapter->pdev->irq); +} +#endif + +static inline u16 atl1c_tpd_avail(struct atl1c_adapter *adapter, enum atl1c_trans_queue type) +{ + struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; + u16 next_to_use = 0; + u16 next_to_clean = 0; + + next_to_clean = atomic_read(&tpd_ring->next_to_clean); + next_to_use = tpd_ring->next_to_use; + + return (u16)(next_to_clean > next_to_use) ? + (next_to_clean - next_to_use - 1) : + (tpd_ring->count + next_to_clean - next_to_use - 1); +} + +/* + * get next usable tpd + * Note: should call atl1c_tdp_avail to make sure + * there is enough tpd to use + */ +static struct atl1c_tpd_desc *atl1c_get_tpd(struct atl1c_adapter *adapter, + enum atl1c_trans_queue type) +{ + struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; + struct atl1c_tpd_desc *tpd_desc; + u16 next_to_use = 0; + + next_to_use = tpd_ring->next_to_use; + if (++tpd_ring->next_to_use == tpd_ring->count) + tpd_ring->next_to_use = 0; + tpd_desc = ATL1C_TPD_DESC(tpd_ring, next_to_use); + memset(tpd_desc, 0, sizeof(struct atl1c_tpd_desc)); + return tpd_desc; +} + +static struct atl1c_buffer * +atl1c_get_tx_buffer(struct atl1c_adapter *adapter, struct atl1c_tpd_desc *tpd) +{ + struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring; + + return &tpd_ring->buffer_info[tpd - + (struct atl1c_tpd_desc *)tpd_ring->desc]; +} + +/* Calculate the transmit packet descript needed*/ +static u16 atl1c_cal_tpd_req(const struct sk_buff *skb) +{ + u16 tpd_req; + u16 proto_hdr_len = 0; + + tpd_req = skb_shinfo(skb)->nr_frags + 1; + + if (skb_is_gso(skb)) { + proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + if (proto_hdr_len < skb_headlen(skb)) + tpd_req++; + if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) + tpd_req++; + } + return tpd_req; +} + +static int atl1c_tso_csum(struct atl1c_adapter *adapter, + struct sk_buff *skb, + struct atl1c_tpd_desc **tpd, + enum atl1c_trans_queue type) +{ + struct pci_dev *pdev = adapter->pdev; + u8 hdr_len; + u32 real_len; + unsigned short offload_type; + int err; + + if (skb_is_gso(skb)) { + if (skb_header_cloned(skb)) { + err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + if (unlikely(err)) + return -1; + } + offload_type = skb_shinfo(skb)->gso_type; + + if (offload_type & SKB_GSO_TCPV4) { + real_len = (((unsigned char *)ip_hdr(skb) - skb->data) + + ntohs(ip_hdr(skb)->tot_len)); + + if (real_len < skb->len) + pskb_trim(skb, real_len); + + hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); + if (unlikely(skb->len == hdr_len)) { + /* only xsum need */ + if (netif_msg_tx_queued(adapter)) + dev_warn(&pdev->dev, + "IPV4 tso with zero data??\n"); + goto check_sum; + } else { + ip_hdr(skb)->check = 0; + tcp_hdr(skb)->check = ~csum_tcpudp_magic( + ip_hdr(skb)->saddr, + ip_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0); + (*tpd)->word1 |= 1 << TPD_IPV4_PACKET_SHIFT; + } + } + + if (offload_type & SKB_GSO_TCPV6) { + struct atl1c_tpd_ext_desc *etpd = + *(struct atl1c_tpd_ext_desc **)(tpd); + + memset(etpd, 0, sizeof(struct atl1c_tpd_ext_desc)); + *tpd = atl1c_get_tpd(adapter, type); + ipv6_hdr(skb)->payload_len = 0; + /* check payload == 0 byte ? */ + hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); + if (unlikely(skb->len == hdr_len)) { + /* only xsum need */ + if (netif_msg_tx_queued(adapter)) + dev_warn(&pdev->dev, + "IPV6 tso with zero data??\n"); + goto check_sum; + } else + tcp_hdr(skb)->check = ~csum_ipv6_magic( + &ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0); + etpd->word1 |= 1 << TPD_LSO_EN_SHIFT; + etpd->word1 |= 1 << TPD_LSO_VER_SHIFT; + etpd->pkt_len = cpu_to_le32(skb->len); + (*tpd)->word1 |= 1 << TPD_LSO_VER_SHIFT; + } + + (*tpd)->word1 |= 1 << TPD_LSO_EN_SHIFT; + (*tpd)->word1 |= (skb_transport_offset(skb) & TPD_TCPHDR_OFFSET_MASK) << + TPD_TCPHDR_OFFSET_SHIFT; + (*tpd)->word1 |= (skb_shinfo(skb)->gso_size & TPD_MSS_MASK) << + TPD_MSS_SHIFT; + return 0; + } + +check_sum: + if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { + u8 css, cso; + cso = skb_transport_offset(skb); + + if (unlikely(cso & 0x1)) { + if (netif_msg_tx_err(adapter)) + dev_err(&adapter->pdev->dev, + "payload offset should not an event number\n"); + return -1; + } else { + css = cso + skb->csum_offset; + + (*tpd)->word1 |= ((cso >> 1) & TPD_PLOADOFFSET_MASK) << + TPD_PLOADOFFSET_SHIFT; + (*tpd)->word1 |= ((css >> 1) & TPD_CCSUM_OFFSET_MASK) << + TPD_CCSUM_OFFSET_SHIFT; + (*tpd)->word1 |= 1 << TPD_CCSUM_EN_SHIFT; + } + } + return 0; +} + +static void atl1c_tx_map(struct atl1c_adapter *adapter, + struct sk_buff *skb, struct atl1c_tpd_desc *tpd, + enum atl1c_trans_queue type) +{ + struct atl1c_tpd_desc *use_tpd = NULL; + struct atl1c_buffer *buffer_info = NULL; + u16 buf_len = skb_headlen(skb); + u16 map_len = 0; + u16 mapped_len = 0; + u16 hdr_len = 0; + u16 nr_frags; + u16 f; + int tso; + + nr_frags = skb_shinfo(skb)->nr_frags; + tso = (tpd->word1 >> TPD_LSO_EN_SHIFT) & TPD_LSO_EN_MASK; + if (tso) { + /* TSO */ + map_len = hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + use_tpd = tpd; + + buffer_info = atl1c_get_tx_buffer(adapter, use_tpd); + buffer_info->length = map_len; + buffer_info->dma = pci_map_single(adapter->pdev, + skb->data, hdr_len, PCI_DMA_TODEVICE); + buffer_info->state = ATL1_BUFFER_BUSY; + mapped_len += map_len; + use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma); + use_tpd->buffer_len = cpu_to_le16(buffer_info->length); + } + + if (mapped_len < buf_len) { + /* mapped_len == 0, means we should use the first tpd, + which is given by caller */ + if (mapped_len == 0) + use_tpd = tpd; + else { + use_tpd = atl1c_get_tpd(adapter, type); + memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc)); + use_tpd = atl1c_get_tpd(adapter, type); + memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc)); + } + buffer_info = atl1c_get_tx_buffer(adapter, use_tpd); + buffer_info->length = buf_len - mapped_len; + buffer_info->dma = + pci_map_single(adapter->pdev, skb->data + mapped_len, + buffer_info->length, PCI_DMA_TODEVICE); + buffer_info->state = ATL1_BUFFER_BUSY; + + use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma); + use_tpd->buffer_len = cpu_to_le16(buffer_info->length); + } + + for (f = 0; f < nr_frags; f++) { + struct skb_frag_struct *frag; + + frag = &skb_shinfo(skb)->frags[f]; + + use_tpd = atl1c_get_tpd(adapter, type); + memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc)); + + buffer_info = atl1c_get_tx_buffer(adapter, use_tpd); + buffer_info->length = frag->size; + buffer_info->dma = + pci_map_page(adapter->pdev, frag->page, + frag->page_offset, + buffer_info->length, + PCI_DMA_TODEVICE); + buffer_info->state = ATL1_BUFFER_BUSY; + + use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma); + use_tpd->buffer_len = cpu_to_le16(buffer_info->length); + } + + /* The last tpd */ + use_tpd->word1 |= 1 << TPD_EOP_SHIFT; + /* The last buffer info contain the skb address, + so it will be free after unmap */ + buffer_info->skb = skb; +} + +static void atl1c_tx_queue(struct atl1c_adapter *adapter, struct sk_buff *skb, + struct atl1c_tpd_desc *tpd, enum atl1c_trans_queue type) +{ + struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type]; + u32 prod_data; + + AT_READ_REG(&adapter->hw, REG_MB_PRIO_PROD_IDX, &prod_data); + switch (type) { + case atl1c_trans_high: + prod_data &= 0xFFFF0000; + prod_data |= tpd_ring->next_to_use & 0xFFFF; + break; + case atl1c_trans_normal: + prod_data &= 0x0000FFFF; + prod_data |= (tpd_ring->next_to_use & 0xFFFF) << 16; + break; + default: + break; + } + wmb(); + AT_WRITE_REG(&adapter->hw, REG_MB_PRIO_PROD_IDX, prod_data); +} + +static int atl1c_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + unsigned long flags; + u16 tpd_req = 1; + struct atl1c_tpd_desc *tpd; + enum atl1c_trans_queue type = atl1c_trans_normal; + + if (test_bit(__AT_DOWN, &adapter->flags)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + tpd_req = atl1c_cal_tpd_req(skb); + if (!spin_trylock_irqsave(&adapter->tx_lock, flags)) { + if (netif_msg_pktdata(adapter)) + dev_info(&adapter->pdev->dev, "tx locked\n"); + return NETDEV_TX_LOCKED; + } + if (skb->mark == 0x01) + type = atl1c_trans_high; + else + type = atl1c_trans_normal; + + if (atl1c_tpd_avail(adapter, type) < tpd_req) { + /* no enough descriptor, just stop queue */ + netif_stop_queue(netdev); + spin_unlock_irqrestore(&adapter->tx_lock, flags); + return NETDEV_TX_BUSY; + } + + tpd = atl1c_get_tpd(adapter, type); + + /* do TSO and check sum */ + if (atl1c_tso_csum(adapter, skb, &tpd, type) != 0) { + spin_unlock_irqrestore(&adapter->tx_lock, flags); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) { + u16 vlan = vlan_tx_tag_get(skb); + __le16 tag; + + vlan = cpu_to_le16(vlan); + AT_VLAN_TO_TAG(vlan, tag); + tpd->word1 |= 1 << TPD_INS_VTAG_SHIFT; + tpd->vlan_tag = tag; + } + + if (skb_network_offset(skb) != ETH_HLEN) + tpd->word1 |= 1 << TPD_ETH_TYPE_SHIFT; /* Ethernet frame */ + + atl1c_tx_map(adapter, skb, tpd, type); + atl1c_tx_queue(adapter, skb, tpd, type); + + netdev->trans_start = jiffies; + spin_unlock_irqrestore(&adapter->tx_lock, flags); + return NETDEV_TX_OK; +} + +static void atl1c_free_irq(struct atl1c_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + free_irq(adapter->pdev->irq, netdev); + + if (adapter->have_msi) + pci_disable_msi(adapter->pdev); +} + +static int atl1c_request_irq(struct atl1c_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct net_device *netdev = adapter->netdev; + int flags = 0; + int err = 0; + + adapter->have_msi = true; + err = pci_enable_msi(adapter->pdev); + if (err) { + if (netif_msg_ifup(adapter)) + dev_err(&pdev->dev, + "Unable to allocate MSI interrupt Error: %d\n", + err); + adapter->have_msi = false; + } else + netdev->irq = pdev->irq; + + if (!adapter->have_msi) + flags |= IRQF_SHARED; + err = request_irq(adapter->pdev->irq, &atl1c_intr, flags, + netdev->name, netdev); + if (err) { + if (netif_msg_ifup(adapter)) + dev_err(&pdev->dev, + "Unable to allocate interrupt Error: %d\n", + err); + if (adapter->have_msi) + pci_disable_msi(adapter->pdev); + return err; + } + if (netif_msg_ifup(adapter)) + dev_dbg(&pdev->dev, "atl1c_request_irq OK\n"); + return err; +} + +int atl1c_up(struct atl1c_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int num; + int err; + int i; + + netif_carrier_off(netdev); + atl1c_init_ring_ptrs(adapter); + atl1c_set_multi(netdev); + atl1c_restore_vlan(adapter); + + for (i = 0; i < adapter->num_rx_queues; i++) { + num = atl1c_alloc_rx_buffer(adapter, i); + if (unlikely(num == 0)) { + err = -ENOMEM; + goto err_alloc_rx; + } + } + + if (atl1c_configure(adapter)) { + err = -EIO; + goto err_up; + } + + err = atl1c_request_irq(adapter); + if (unlikely(err)) + goto err_up; + + clear_bit(__AT_DOWN, &adapter->flags); + napi_enable(&adapter->napi); + atl1c_irq_enable(adapter); + atl1c_check_link_status(adapter); + netif_start_queue(netdev); + return err; + +err_up: +err_alloc_rx: + atl1c_clean_rx_ring(adapter); + return err; +} + +void atl1c_down(struct atl1c_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + atl1c_del_timer(adapter); + atl1c_cancel_work(adapter); + + /* signal that we're down so the interrupt handler does not + * reschedule our watchdog timer */ + set_bit(__AT_DOWN, &adapter->flags); + netif_carrier_off(netdev); + napi_disable(&adapter->napi); + atl1c_irq_disable(adapter); + atl1c_free_irq(adapter); + AT_WRITE_REG(&adapter->hw, REG_ISR, ISR_DIS_INT); + /* reset MAC to disable all RX/TX */ + atl1c_reset_mac(&adapter->hw); + msleep(1); + + adapter->link_speed = SPEED_0; + adapter->link_duplex = -1; + atl1c_clean_tx_ring(adapter, atl1c_trans_normal); + atl1c_clean_tx_ring(adapter, atl1c_trans_high); + atl1c_clean_rx_ring(adapter); +} + +/* + * atl1c_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + */ +static int atl1c_open(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + int err; + + /* disallow open during test */ + if (test_bit(__AT_TESTING, &adapter->flags)) + return -EBUSY; + + /* allocate rx/tx dma buffer & descriptors */ + err = atl1c_setup_ring_resources(adapter); + if (unlikely(err)) + return err; + + err = atl1c_up(adapter); + if (unlikely(err)) + goto err_up; + + if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) { + u32 phy_data; + + AT_READ_REG(&adapter->hw, REG_MDIO_CTRL, &phy_data); + phy_data |= MDIO_AP_EN; + AT_WRITE_REG(&adapter->hw, REG_MDIO_CTRL, phy_data); + } + return 0; + +err_up: + atl1c_free_irq(adapter); + atl1c_free_ring_resources(adapter); + atl1c_reset_mac(&adapter->hw); + return err; +} + +/* + * atl1c_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + */ +static int atl1c_close(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + + WARN_ON(test_bit(__AT_RESETTING, &adapter->flags)); + atl1c_down(adapter); + atl1c_free_ring_resources(adapter); + return 0; +} + +static int atl1c_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct atl1c_hw *hw = &adapter->hw; + u32 ctrl; + u32 mac_ctrl_data; + u32 master_ctrl_data; + u32 wol_ctrl_data; + u16 mii_bmsr_data; + u16 save_autoneg_advertised; + u16 mii_intr_status_data; + u32 wufc = adapter->wol; + u32 i; + int retval = 0; + + if (netif_running(netdev)) { + WARN_ON(test_bit(__AT_RESETTING, &adapter->flags)); + atl1c_down(adapter); + } + netif_device_detach(netdev); + atl1c_disable_l0s_l1(hw); + retval = pci_save_state(pdev); + if (retval) + return retval; + if (wufc) { + AT_READ_REG(hw, REG_MASTER_CTRL, &master_ctrl_data); + master_ctrl_data &= ~MASTER_CTRL_CLK_SEL_DIS; + + /* get link status */ + atl1c_read_phy_reg(hw, MII_BMSR, (u16 *)&mii_bmsr_data); + atl1c_read_phy_reg(hw, MII_BMSR, (u16 *)&mii_bmsr_data); + save_autoneg_advertised = hw->autoneg_advertised; + hw->autoneg_advertised = ADVERTISED_10baseT_Half; + if (atl1c_restart_autoneg(hw) != 0) + if (netif_msg_link(adapter)) + dev_warn(&pdev->dev, "phy autoneg failed\n"); + hw->phy_configured = false; /* re-init PHY when resume */ + hw->autoneg_advertised = save_autoneg_advertised; + /* turn on magic packet wol */ + if (wufc & AT_WUFC_MAG) + wol_ctrl_data = WOL_MAGIC_EN | WOL_MAGIC_PME_EN; + + if (wufc & AT_WUFC_LNKC) { + for (i = 0; i < AT_SUSPEND_LINK_TIMEOUT; i++) { + msleep(100); + atl1c_read_phy_reg(hw, MII_BMSR, + (u16 *)&mii_bmsr_data); + if (mii_bmsr_data & BMSR_LSTATUS) + break; + } + if ((mii_bmsr_data & BMSR_LSTATUS) == 0) + if (netif_msg_link(adapter)) + dev_warn(&pdev->dev, + "%s: Link may change" + "when suspend\n", + atl1c_driver_name); + wol_ctrl_data |= WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN; + /* only link up can wake up */ + if (atl1c_write_phy_reg(hw, MII_IER, IER_LINK_UP) != 0) { + if (netif_msg_link(adapter)) + dev_err(&pdev->dev, + "%s: read write phy " + "register failed.\n", + atl1c_driver_name); + goto wol_dis; + } + } + /* clear phy interrupt */ + atl1c_read_phy_reg(hw, MII_ISR, &mii_intr_status_data); + /* Config MAC Ctrl register */ + mac_ctrl_data = MAC_CTRL_RX_EN; + /* set to 10/100M halt duplex */ + mac_ctrl_data |= atl1c_mac_speed_10_100 << MAC_CTRL_SPEED_SHIFT; + mac_ctrl_data |= (((u32)adapter->hw.preamble_len & + MAC_CTRL_PRMLEN_MASK) << + MAC_CTRL_PRMLEN_SHIFT); + + if (adapter->vlgrp) + mac_ctrl_data |= MAC_CTRL_RMV_VLAN; + + /* magic packet maybe Broadcast&multicast&Unicast frame */ + if (wufc & AT_WUFC_MAG) + mac_ctrl_data |= MAC_CTRL_BC_EN; + + if (netif_msg_hw(adapter)) + dev_dbg(&pdev->dev, + "%s: suspend MAC=0x%x\n", + atl1c_driver_name, mac_ctrl_data); + AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data); + AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data); + AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); + + /* pcie patch */ + AT_READ_REG(hw, REG_PCIE_PHYMISC, &ctrl); + ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; + AT_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl); + + pci_enable_wake(pdev, pci_choose_state(pdev, state), 1); + goto suspend_exit; + } +wol_dis: + + /* WOL disabled */ + AT_WRITE_REG(hw, REG_WOL_CTRL, 0); + + /* pcie patch */ + AT_READ_REG(hw, REG_PCIE_PHYMISC, &ctrl); + ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; + AT_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl); + + atl1c_phy_disable(hw); + hw->phy_configured = false; /* re-init PHY when resume */ + + pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); +suspend_exit: + + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static int atl1c_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1c_adapter *adapter = netdev_priv(netdev); + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0); + + atl1c_phy_reset(&adapter->hw); + atl1c_reset_mac(&adapter->hw); + netif_device_attach(netdev); + if (netif_running(netdev)) + atl1c_up(adapter); + + return 0; +} + +static void atl1c_shutdown(struct pci_dev *pdev) +{ + atl1c_suspend(pdev, PMSG_SUSPEND); +} + +static const struct net_device_ops atl1c_netdev_ops = { + .ndo_open = atl1c_open, + .ndo_stop = atl1c_close, + .ndo_validate_addr = eth_validate_addr, + .ndo_start_xmit = atl1c_xmit_frame, + .ndo_set_mac_address = atl1c_set_mac_addr, + .ndo_set_multicast_list = atl1c_set_multi, + .ndo_change_mtu = atl1c_change_mtu, + .ndo_do_ioctl = atl1c_ioctl, + .ndo_tx_timeout = atl1c_tx_timeout, + .ndo_get_stats = atl1c_get_stats, + .ndo_vlan_rx_register = atl1c_vlan_rx_register, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = atl1c_netpoll, +#endif +}; + +static int atl1c_init_netdev(struct net_device *netdev, struct pci_dev *pdev) +{ + SET_NETDEV_DEV(netdev, &pdev->dev); + pci_set_drvdata(pdev, netdev); + + netdev->irq = pdev->irq; + netdev->netdev_ops = &atl1c_netdev_ops; + netdev->watchdog_timeo = AT_TX_WATCHDOG; + atl1c_set_ethtool_ops(netdev); + + /* TODO: add when ready */ + netdev->features = NETIF_F_SG | + NETIF_F_HW_CSUM | + NETIF_F_HW_VLAN_TX | + NETIF_F_HW_VLAN_RX | + NETIF_F_TSO | + NETIF_F_TSO6; + return 0; +} + +/* + * atl1c_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in atl1c_pci_tbl + * + * Returns 0 on success, negative on failure + * + * atl1c_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + */ +static int __devinit atl1c_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *netdev; + struct atl1c_adapter *adapter; + static int cards_found; + + int err = 0; + + /* enable device (incl. PCI PM wakeup and hotplug setup) */ + err = pci_enable_device_mem(pdev); + if (err) { + dev_err(&pdev->dev, "cannot enable PCI device\n"); + return err; + } + + /* + * The atl1c chip can DMA to 64-bit addresses, but it uses a single + * shared register for the high 32 bits, so only a single, aligned, + * 4 GB physical address range can be used at a time. + * + * Supporting 64-bit DMA on this hardware is more trouble than it's + * worth. It is far easier to limit to 32-bit DMA than update + * various kernel subsystems to support the mechanics required by a + * fixed-high-32-bit system. + */ + if ((pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) || + (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) != 0)) { + dev_err(&pdev->dev, "No usable DMA configuration,aborting\n"); + goto err_dma; + } + + err = pci_request_regions(pdev, atl1c_driver_name); + if (err) { + dev_err(&pdev->dev, "cannot obtain PCI resources\n"); + goto err_pci_reg; + } + + pci_set_master(pdev); + + netdev = alloc_etherdev(sizeof(struct atl1c_adapter)); + if (netdev == NULL) { + err = -ENOMEM; + dev_err(&pdev->dev, "etherdev alloc failed\n"); + goto err_alloc_etherdev; + } + + err = atl1c_init_netdev(netdev, pdev); + if (err) { + dev_err(&pdev->dev, "init netdevice failed\n"); + goto err_init_netdev; + } + adapter = netdev_priv(netdev); + adapter->bd_number = cards_found; + adapter->netdev = netdev; + adapter->pdev = pdev; + adapter->hw.adapter = adapter; + adapter->msg_enable = netif_msg_init(-1, atl1c_default_msg); + adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); + if (!adapter->hw.hw_addr) { + err = -EIO; + dev_err(&pdev->dev, "cannot map device registers\n"); + goto err_ioremap; + } + netdev->base_addr = (unsigned long)adapter->hw.hw_addr; + + /* init mii data */ + adapter->mii.dev = netdev; + adapter->mii.mdio_read = atl1c_mdio_read; + adapter->mii.mdio_write = atl1c_mdio_write; + adapter->mii.phy_id_mask = 0x1f; + adapter->mii.reg_num_mask = MDIO_REG_ADDR_MASK; + netif_napi_add(netdev, &adapter->napi, atl1c_clean, 64); + setup_timer(&adapter->phy_config_timer, atl1c_phy_config, + (unsigned long)adapter); + /* setup the private structure */ + err = atl1c_sw_init(adapter); + if (err) { + dev_err(&pdev->dev, "net device private data init failed\n"); + goto err_sw_init; + } + atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE | + ATL1C_PCIE_PHY_RESET); + + /* Init GPHY as early as possible due to power saving issue */ + atl1c_phy_reset(&adapter->hw); + + err = atl1c_reset_mac(&adapter->hw); + if (err) { + err = -EIO; + goto err_reset; + } + + device_init_wakeup(&pdev->dev, 1); + /* reset the controller to + * put the device in a known good starting state */ + err = atl1c_phy_init(&adapter->hw); + if (err) { + err = -EIO; + goto err_reset; + } + if (atl1c_read_mac_addr(&adapter->hw) != 0) { + err = -EIO; + dev_err(&pdev->dev, "get mac address failed\n"); + goto err_eeprom; + } + memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); + memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len); + if (netif_msg_probe(adapter)) + dev_dbg(&pdev->dev, + "mac address : %02x-%02x-%02x-%02x-%02x-%02x\n", + adapter->hw.mac_addr[0], adapter->hw.mac_addr[1], + adapter->hw.mac_addr[2], adapter->hw.mac_addr[3], + adapter->hw.mac_addr[4], adapter->hw.mac_addr[5]); + + atl1c_hw_set_mac_addr(&adapter->hw); + INIT_WORK(&adapter->reset_task, atl1c_reset_task); + INIT_WORK(&adapter->link_chg_task, atl1c_link_chg_task); + err = register_netdev(netdev); + if (err) { + dev_err(&pdev->dev, "register netdevice failed\n"); + goto err_register; + } + + if (netif_msg_probe(adapter)) + dev_info(&pdev->dev, "version %s\n", ATL1C_DRV_VERSION); + cards_found++; + return 0; + +err_reset: +err_register: +err_sw_init: +err_eeprom: + iounmap(adapter->hw.hw_addr); +err_init_netdev: +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: + pci_release_regions(pdev); +err_pci_reg: +err_dma: + pci_disable_device(pdev); + return err; +} + +/* + * atl1c_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * atl1c_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + */ +static void __devexit atl1c_remove(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1c_adapter *adapter = netdev_priv(netdev); + + unregister_netdev(netdev); + atl1c_phy_disable(&adapter->hw); + + iounmap(adapter->hw.hw_addr); + + pci_release_regions(pdev); + pci_disable_device(pdev); + free_netdev(netdev); +} + +/* + * atl1c_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t atl1c_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1c_adapter *adapter = netdev_priv(netdev); + + netif_device_detach(netdev); + + if (netif_running(netdev)) + atl1c_down(adapter); + + pci_disable_device(pdev); + + /* Request a slot slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/* + * atl1c_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. Implementation + * resembles the first-half of the e1000_resume routine. + */ +static pci_ers_result_t atl1c_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1c_adapter *adapter = netdev_priv(netdev); + + if (pci_enable_device(pdev)) { + if (netif_msg_hw(adapter)) + dev_err(&pdev->dev, + "Cannot re-enable PCI device after reset\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + pci_set_master(pdev); + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + atl1c_reset_mac(&adapter->hw); + + return PCI_ERS_RESULT_RECOVERED; +} + +/* + * atl1c_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. Implementation resembles the + * second-half of the atl1c_resume routine. + */ +static void atl1c_io_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct atl1c_adapter *adapter = netdev_priv(netdev); + + if (netif_running(netdev)) { + if (atl1c_up(adapter)) { + if (netif_msg_hw(adapter)) + dev_err(&pdev->dev, + "Cannot bring device back up after reset\n"); + return; + } + } + + netif_device_attach(netdev); +} + +static struct pci_error_handlers atl1c_err_handler = { + .error_detected = atl1c_io_error_detected, + .slot_reset = atl1c_io_slot_reset, + .resume = atl1c_io_resume, +}; + +static struct pci_driver atl1c_driver = { + .name = atl1c_driver_name, + .id_table = atl1c_pci_tbl, + .probe = atl1c_probe, + .remove = __devexit_p(atl1c_remove), + /* Power Managment Hooks */ + .suspend = atl1c_suspend, + .resume = atl1c_resume, + .shutdown = atl1c_shutdown, + .err_handler = &atl1c_err_handler +}; + +/* + * atl1c_init_module - Driver Registration Routine + * + * atl1c_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. + */ +static int __init atl1c_init_module(void) +{ + return pci_register_driver(&atl1c_driver); +} + +/* + * atl1c_exit_module - Driver Exit Cleanup Routine + * + * atl1c_exit_module is called just before the driver is removed + * from memory. + */ +static void __exit atl1c_exit_module(void) +{ + pci_unregister_driver(&atl1c_driver); +} + +module_init(atl1c_init_module); +module_exit(atl1c_exit_module); diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 0f6062aaa2c6..c32f514c41a7 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -90,6 +90,7 @@ static const struct pci_device_id cxgb3_pci_tbl[] = { CH_DEVICE(0x30, 2), /* T3B10 */ CH_DEVICE(0x31, 3), /* T3B20 */ CH_DEVICE(0x32, 1), /* T3B02 */ + CH_DEVICE(0x35, 6), /* T3C20-derived T3C10 */ {0,} }; diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 2d1433077a8e..ac2a974dfe37 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -512,6 +512,13 @@ static const struct adapter_info t3_adap_info[] = { F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, { S_GPIO9, S_GPIO3 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI, &mi1_mdio_ext_ops, "Chelsio T320"}, + {}, + {}, + {1, 0, + F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO6_OEN | F_GPIO7_OEN | + F_GPIO10_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, + { S_GPIO9 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI, + &mi1_mdio_ext_ops, "Chelsio T310" }, }; /* diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 021308f9f0c7..8b7f8b77e5e0 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -6102,9 +6102,20 @@ static void nv_shutdown(struct pci_dev *pdev) if (netif_running(dev)) nv_close(dev); - nv_restore_mac_addr(pdev); + /* + * Restore the MAC so a kernel started by kexec won't get confused. + * If we really go for poweroff, we must not restore the MAC, + * otherwise the MAC for WOL will be reversed at least on some boards. + */ + if (system_state != SYSTEM_POWER_OFF) { + nv_restore_mac_addr(pdev); + } pci_disable_device(pdev); + /* + * Apparently it is not possible to reinitialise from D3 hot, + * only put the device into D3 if we really go for poweroff. + */ if (system_state == SYSTEM_POWER_OFF) { if (pci_enable_wake(pdev, PCI_D3cold, np->wolenabled)) pci_enable_wake(pdev, PCI_D3hot, np->wolenabled); diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index bb9693195242..56912add8b13 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1263,7 +1263,7 @@ static void mib_counters_update(struct mv643xx_eth_private *mp) { struct mib_counters *p = &mp->mib_counters; - spin_lock(&mp->mib_counters_lock); + spin_lock_bh(&mp->mib_counters_lock); p->good_octets_received += mib_read(mp, 0x00); p->good_octets_received += (u64)mib_read(mp, 0x04) << 32; p->bad_octets_received += mib_read(mp, 0x08); @@ -1296,7 +1296,7 @@ static void mib_counters_update(struct mv643xx_eth_private *mp) p->bad_crc_event += mib_read(mp, 0x74); p->collision += mib_read(mp, 0x78); p->late_collision += mib_read(mp, 0x7c); - spin_unlock(&mp->mib_counters_lock); + spin_unlock_bh(&mp->mib_counters_lock); mod_timer(&mp->mib_counters_timer, jiffies + 30 * HZ); } @@ -1831,7 +1831,7 @@ oom: return; } - mc_spec = kmalloc(0x200, GFP_KERNEL); + mc_spec = kmalloc(0x200, GFP_ATOMIC); if (mc_spec == NULL) goto oom; mc_other = mc_spec + (0x100 >> 2); @@ -2457,8 +2457,6 @@ static int mv643xx_eth_stop(struct net_device *dev) wrlp(mp, INT_MASK, 0x00000000); rdlp(mp, INT_MASK); - del_timer_sync(&mp->mib_counters_timer); - napi_disable(&mp->napi); del_timer_sync(&mp->rx_oom); @@ -2470,6 +2468,7 @@ static int mv643xx_eth_stop(struct net_device *dev) port_reset(mp); mv643xx_eth_get_stats(dev); mib_counters_update(mp); + del_timer_sync(&mp->mib_counters_timer); skb_queue_purge(&mp->rx_recycle); diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index 6e175e5555a1..dceae8a65809 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -1619,7 +1619,7 @@ static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op) do { msleep(1); e2cmd = smsc911x_reg_read(pdata, E2P_CMD); - } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (timeout--)); + } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout)); if (!timeout) { SMSC_TRACE(DRV, "TIMED OUT"); diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index da8b977a5357..17560dbcc7ad 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -341,7 +341,7 @@ static int smsc9420_eeprom_send_cmd(struct smsc9420_pdata *pd, u32 op) do { msleep(1); e2cmd = smsc9420_reg_read(pd, E2P_CMD); - } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (timeout--)); + } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout)); if (!timeout) { smsc_info(HW, "TIMED OUT"); @@ -413,6 +413,7 @@ static int smsc9420_ethtool_get_eeprom(struct net_device *dev, } memcpy(data, &eeprom_data[eeprom->offset], len); + eeprom->magic = SMSC9420_EEPROM_MAGIC; eeprom->len = len; return 0; } @@ -423,6 +424,9 @@ static int smsc9420_ethtool_set_eeprom(struct net_device *dev, struct smsc9420_pdata *pd = netdev_priv(dev); int ret; + if (eeprom->magic != SMSC9420_EEPROM_MAGIC) + return -EINVAL; + smsc9420_eeprom_enable_access(pd); smsc9420_eeprom_send_cmd(pd, E2P_CMD_EPC_CMD_EWEN_); ret = smsc9420_eeprom_write_location(pd, eeprom->offset, *data); diff --git a/drivers/net/smsc9420.h b/drivers/net/smsc9420.h index 69c351f93f86..e441402f77a2 100644 --- a/drivers/net/smsc9420.h +++ b/drivers/net/smsc9420.h @@ -44,6 +44,7 @@ #define LAN_REGISTER_EXTENT (0x400) #define SMSC9420_EEPROM_SIZE ((u32)11) +#define SMSC9420_EEPROM_MAGIC (0x9420) #define PKT_BUF_SZ (VLAN_ETH_FRAME_LEN + NET_IP_ALIGN + 4) diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index feaf0e0577d7..43695b76606f 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -909,7 +909,7 @@ static void check_duplex(struct net_device *dev) printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d " "negotiated capability %4.4x.\n", dev->name, duplex ? "full" : "half", np->phys[0], negotiated); - iowrite16(ioread16(ioaddr + MACCtrl0) | duplex ? 0x20 : 0, ioaddr + MACCtrl0); + iowrite16(ioread16(ioaddr + MACCtrl0) | (duplex ? 0x20 : 0), ioaddr + MACCtrl0); } } diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 5322bb79b2b5..c3e6aa137cdf 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -1157,7 +1157,7 @@ static void gem_pcs_reset(struct gem *gp) if (limit-- <= 0) break; } - if (limit <= 0) + if (limit < 0) printk(KERN_WARNING "%s: PCS reset bit would not clear.\n", gp->dev->name); } diff --git a/drivers/net/sunlance.c b/drivers/net/sunlance.c index 281373281756..16c528db7251 100644 --- a/drivers/net/sunlance.c +++ b/drivers/net/sunlance.c @@ -343,7 +343,7 @@ static void lance_init_ring_dvma(struct net_device *dev) ib->phys_addr [5] = dev->dev_addr [4]; /* Setup the Tx ring entries */ - for (i = 0; i <= TX_RING_SIZE; i++) { + for (i = 0; i < TX_RING_SIZE; i++) { leptr = LANCE_ADDR(aib + libbuff_offset(tx_buf, i)); ib->btx_ring [i].tmd0 = leptr; ib->btx_ring [i].tmd1_hadr = leptr >> 16; @@ -399,7 +399,7 @@ static void lance_init_ring_pio(struct net_device *dev) sbus_writeb(dev->dev_addr[4], &ib->phys_addr[5]); /* Setup the Tx ring entries */ - for (i = 0; i <= TX_RING_SIZE; i++) { + for (i = 0; i < TX_RING_SIZE; i++) { leptr = libbuff_offset(tx_buf, i); sbus_writew(leptr, &ib->btx_ring [i].tmd0); sbus_writeb(leptr >> 16,&ib->btx_ring [i].tmd1_hadr); diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 479a37f75f30..67630fb8272e 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -2237,8 +2237,8 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) phyid = phydev->drv->phy_id & phydev->drv->phy_id_mask; if (phyid != TG3_PHY_ID_BCMAC131) { phyid &= TG3_PHY_OUI_MASK; - if (phyid == TG3_PHY_OUI_1 && - phyid == TG3_PHY_OUI_2 && + if (phyid == TG3_PHY_OUI_1 || + phyid == TG3_PHY_OUI_2 || phyid == TG3_PHY_OUI_3) do_low_power = true; } diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 852d0e7c4e62..108bbbeacfb6 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -263,10 +263,11 @@ static void veth_dev_free(struct net_device *dev) } static const struct net_device_ops veth_netdev_ops = { - .ndo_init = veth_dev_init, - .ndo_open = veth_open, - .ndo_start_xmit = veth_xmit, - .ndo_get_stats = veth_get_stats, + .ndo_init = veth_dev_init, + .ndo_open = veth_open, + .ndo_start_xmit = veth_xmit, + .ndo_get_stats = veth_get_stats, + .ndo_set_mac_address = eth_mac_addr, }; static void veth_setup(struct net_device *dev) diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h index 236f19ea4c85..f9e55397ee88 100644 --- a/drivers/net/wimax/i2400m/i2400m.h +++ b/drivers/net/wimax/i2400m/i2400m.h @@ -157,7 +157,7 @@ enum { /* Firmware version we request when pulling the fw image file */ -#define I2400M_FW_VERSION "1.3" +#define I2400M_FW_VERSION "1.4" /** diff --git a/drivers/parport/parport_atari.c b/drivers/parport/parport_atari.c index ad4cdd256137..0b28fccec03f 100644 --- a/drivers/parport/parport_atari.c +++ b/drivers/parport/parport_atari.c @@ -84,7 +84,7 @@ parport_atari_frob_control(struct parport *p, unsigned char mask, static unsigned char parport_atari_read_status(struct parport *p) { - return ((mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) | + return ((st_mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) | PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR); } @@ -193,9 +193,9 @@ static int __init parport_atari_init(void) sound_ym.wd_data = sound_ym.rd_data_reg_sel | (1 << 5); local_irq_restore(flags); /* MFP port I0 as input. */ - mfp.data_dir &= ~1; + st_mfp.data_dir &= ~1; /* MFP port I0 interrupt on high->low edge. */ - mfp.active_edge &= ~1; + st_mfp.active_edge &= ~1; p = parport_register_port((unsigned long)&sound_ym.wd_data, IRQ_MFP_BUSY, PARPORT_DMA_NONE, &parport_atari_ops); diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index f4b7c79023ff..f3f686581a90 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -61,6 +61,8 @@ /* global iommu list, set NULL for ignored DMAR units */ static struct intel_iommu **g_iommus; +static int rwbf_quirk; + /* * 0: Present * 1-11: Reserved @@ -785,7 +787,7 @@ static void iommu_flush_write_buffer(struct intel_iommu *iommu) u32 val; unsigned long flag; - if (!cap_rwbf(iommu->cap)) + if (!rwbf_quirk && !cap_rwbf(iommu->cap)) return; val = iommu->gcmd | DMA_GCMD_WBF; @@ -3137,3 +3139,15 @@ static struct iommu_ops intel_iommu_ops = { .unmap = intel_iommu_unmap_range, .iova_to_phys = intel_iommu_iova_to_phys, }; + +static void __devinit quirk_iommu_rwbf(struct pci_dev *dev) +{ + /* + * Mobile 4 Series Chipset neglects to set RWBF capability, + * but needs it: + */ + printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n"); + rwbf_quirk = 1; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf); diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 44f15ff70c1d..baba2eb5367d 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -103,14 +103,12 @@ static void msix_set_enable(struct pci_dev *dev, int enable) } } -/* - * Essentially, this is ((1 << (1 << x)) - 1), but without the - * undefinedness of a << 32. - */ static inline __attribute_const__ u32 msi_mask(unsigned x) { - static const u32 mask[] = { 1, 2, 4, 0xf, 0xff, 0xffff, 0xffffffff }; - return mask[x]; + /* Don't shift by >= width of type */ + if (x >= 5) + return 0xffffffff; + return (1 << (1 << x)) - 1; } static void msix_flush_writes(struct irq_desc *desc) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e3efe6b19ee7..6d6120007af4 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1540,16 +1540,21 @@ void pci_release_region(struct pci_dev *pdev, int bar) } /** - * pci_request_region - Reserved PCI I/O and memory resource + * __pci_request_region - Reserved PCI I/O and memory resource * @pdev: PCI device whose resources are to be reserved * @bar: BAR to be reserved * @res_name: Name to be associated with resource. + * @exclusive: whether the region access is exclusive or not * * Mark the PCI region associated with PCI device @pdev BR @bar as * being reserved by owner @res_name. Do not access any * address inside the PCI regions unless this call returns * successfully. * + * If @exclusive is set, then the region is marked so that userspace + * is explicitly not allowed to map the resource via /dev/mem or + * sysfs MMIO access. + * * Returns 0 on success, or %EBUSY on error. A warning * message is also printed on failure. */ @@ -1588,12 +1593,12 @@ err_out: } /** - * pci_request_region - Reserved PCI I/O and memory resource + * pci_request_region - Reserve PCI I/O and memory resource * @pdev: PCI device whose resources are to be reserved * @bar: BAR to be reserved - * @res_name: Name to be associated with resource. + * @res_name: Name to be associated with resource * - * Mark the PCI region associated with PCI device @pdev BR @bar as + * Mark the PCI region associated with PCI device @pdev BAR @bar as * being reserved by owner @res_name. Do not access any * address inside the PCI regions unless this call returns * successfully. diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 26ddf78ac300..07c0aa5275e6 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -16,21 +16,21 @@ extern int pci_mmap_fits(struct pci_dev *pdev, int resno, #endif /** - * Firmware PM callbacks + * struct pci_platform_pm_ops - Firmware PM callbacks * - * @is_manageable - returns 'true' if given device is power manageable by the - * platform firmware + * @is_manageable: returns 'true' if given device is power manageable by the + * platform firmware * - * @set_state - invokes the platform firmware to set the device's power state + * @set_state: invokes the platform firmware to set the device's power state * - * @choose_state - returns PCI power state of given device preferred by the - * platform; to be used during system-wide transitions from a - * sleeping state to the working state and vice versa + * @choose_state: returns PCI power state of given device preferred by the + * platform; to be used during system-wide transitions from a + * sleeping state to the working state and vice versa * - * @can_wakeup - returns 'true' if given device is capable of waking up the - * system from a sleeping state + * @can_wakeup: returns 'true' if given device is capable of waking up the + * system from a sleeping state * - * @sleep_wake - enables/disables the system wake up capability of given device + * @sleep_wake: enables/disables the system wake up capability of given device * * If given platform is generally capable of power managing PCI devices, all of * these callbacks are mandatory. diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index 29cbe47f219f..36864a935d68 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -55,6 +55,7 @@ void pci_disable_rom(struct pci_dev *pdev) /** * pci_get_rom_size - obtain the actual size of the ROM image + * @pdev: target PCI device * @rom: kernel virtual pointer to image of ROM * @size: size of PCI window * return: size of actual ROM image diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 94363115a42a..b3866ad50227 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -62,6 +62,7 @@ config DELL_LAPTOP depends on EXPERIMENTAL depends on BACKLIGHT_CLASS_DEVICE depends on RFKILL + depends on POWER_SUPPLY default n ---help--- This driver adds support for rfkill and backlight control to Dell @@ -301,6 +302,7 @@ config INTEL_MENLOW config EEEPC_LAPTOP tristate "Eee PC Hotkey Driver (EXPERIMENTAL)" depends on ACPI + depends on INPUT depends on EXPERIMENTAL select BACKLIGHT_CLASS_DEVICE select HWMON diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index 65dc41540c62..45940f31fe9e 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -166,6 +166,7 @@ struct fujitsu_hotkey_t { struct platform_device *pf_device; struct kfifo *fifo; spinlock_t fifo_lock; + int rfkill_supported; int rfkill_state; int logolamp_registered; int kblamps_registered; @@ -526,7 +527,7 @@ static ssize_t show_lid_state(struct device *dev, struct device_attribute *attr, char *buf) { - if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD) + if (!(fujitsu_hotkey->rfkill_supported & 0x100)) return sprintf(buf, "unknown\n"); if (fujitsu_hotkey->rfkill_state & 0x100) return sprintf(buf, "open\n"); @@ -538,7 +539,7 @@ static ssize_t show_dock_state(struct device *dev, struct device_attribute *attr, char *buf) { - if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD) + if (!(fujitsu_hotkey->rfkill_supported & 0x200)) return sprintf(buf, "unknown\n"); if (fujitsu_hotkey->rfkill_state & 0x200) return sprintf(buf, "docked\n"); @@ -550,7 +551,7 @@ static ssize_t show_radios_state(struct device *dev, struct device_attribute *attr, char *buf) { - if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD) + if (!(fujitsu_hotkey->rfkill_supported & 0x20)) return sprintf(buf, "unknown\n"); if (fujitsu_hotkey->rfkill_state & 0x20) return sprintf(buf, "on\n"); @@ -928,8 +929,17 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) ; /* No action, result is discarded */ vdbg_printk(FUJLAPTOP_DBG_INFO, "Discarded %i ringbuffer entries\n", i); - fujitsu_hotkey->rfkill_state = - call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); + fujitsu_hotkey->rfkill_supported = + call_fext_func(FUNC_RFKILL, 0x0, 0x0, 0x0); + + /* Make sure our bitmask of supported functions is cleared if the + RFKILL function block is not implemented, like on the S7020. */ + if (fujitsu_hotkey->rfkill_supported == UNSUPPORTED_CMD) + fujitsu_hotkey->rfkill_supported = 0; + + if (fujitsu_hotkey->rfkill_supported) + fujitsu_hotkey->rfkill_state = + call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); /* Suspect this is a keymap of the application panel, print it */ printk(KERN_INFO "fujitsu-laptop: BTNI: [0x%x]\n", @@ -1005,8 +1015,9 @@ static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event, input = fujitsu_hotkey->input; - fujitsu_hotkey->rfkill_state = - call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); + if (fujitsu_hotkey->rfkill_supported) + fujitsu_hotkey->rfkill_state = + call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); switch (event) { case ACPI_FUJITSU_NOTIFY_CODE1: diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c index 1fd8f2193ed8..4377e93a43d7 100644 --- a/drivers/s390/char/sclp.c +++ b/drivers/s390/char/sclp.c @@ -280,8 +280,11 @@ sclp_dispatch_evbufs(struct sccb_header *sccb) rc = 0; for (offset = sizeof(struct sccb_header); offset < sccb->length; offset += evbuf->length) { - /* Search for event handler */ evbuf = (struct evbuf_header *) ((addr_t) sccb + offset); + /* Check for malformed hardware response */ + if (evbuf->length == 0) + break; + /* Search for event handler */ reg = NULL; list_for_each(l, &sclp_reg_list) { reg = list_entry(l, struct sclp_register, list); diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index 506390496416..77ab6e34a100 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -19,6 +19,7 @@ #include <linux/memory.h> #include <asm/chpid.h> #include <asm/sclp.h> +#include <asm/setup.h> #include "sclp.h" @@ -474,6 +475,10 @@ static void __init add_memory_merged(u16 rn) goto skip_add; if (start + size > VMEM_MAX_PHYS) size = VMEM_MAX_PHYS - start; + if (memory_end_set && (start >= memory_end)) + goto skip_add; + if (memory_end_set && (start + size > memory_end)) + size = memory_end - start; add_memory(0, start, size); skip_add: first_rn = rn; diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index a1a511bdec8c..ed1e728763a2 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -1573,9 +1573,6 @@ static int ibmvfc_queuecommand(struct scsi_cmnd *cmnd, vfc_cmd->resp_len = sizeof(vfc_cmd->rsp); vfc_cmd->cancel_key = (unsigned long)cmnd->device->hostdata; vfc_cmd->tgt_scsi_id = rport->port_id; - if ((rport->supported_classes & FC_COS_CLASS3) && - (fc_host_supported_classes(vhost->host) & FC_COS_CLASS3)) - vfc_cmd->flags = IBMVFC_CLASS_3_ERR; vfc_cmd->iu.xfer_len = scsi_bufflen(cmnd); int_to_scsilun(cmnd->device->lun, &vfc_cmd->iu.lun); memcpy(vfc_cmd->iu.cdb, cmnd->cmnd, cmnd->cmd_len); @@ -3266,6 +3263,7 @@ static int ibmvfc_alloc_target(struct ibmvfc_host *vhost, u64 scsi_id) return -ENOMEM; } + memset(tgt, 0, sizeof(*tgt)); tgt->scsi_id = scsi_id; tgt->new_scsi_id = scsi_id; tgt->vhost = vhost; @@ -3576,9 +3574,18 @@ static void ibmvfc_log_ae(struct ibmvfc_host *vhost, int events) static void ibmvfc_tgt_add_rport(struct ibmvfc_target *tgt) { struct ibmvfc_host *vhost = tgt->vhost; - struct fc_rport *rport; + struct fc_rport *rport = tgt->rport; unsigned long flags; + if (rport) { + tgt_dbg(tgt, "Setting rport roles\n"); + fc_remote_port_rolechg(rport, tgt->ids.roles); + spin_lock_irqsave(vhost->host->host_lock, flags); + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE); + spin_unlock_irqrestore(vhost->host->host_lock, flags); + return; + } + tgt_dbg(tgt, "Adding rport\n"); rport = fc_remote_port_add(vhost->host, 0, &tgt->ids); spin_lock_irqsave(vhost->host->host_lock, flags); diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h index 87dafd0f8d44..b21e071b9862 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.h +++ b/drivers/scsi/ibmvscsi/ibmvfc.h @@ -32,7 +32,7 @@ #define IBMVFC_DRIVER_VERSION "1.0.4" #define IBMVFC_DRIVER_DATE "(November 14, 2008)" -#define IBMVFC_DEFAULT_TIMEOUT 15 +#define IBMVFC_DEFAULT_TIMEOUT 60 #define IBMVFC_INIT_TIMEOUT 120 #define IBMVFC_MAX_REQUESTS_DEFAULT 100 diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 74d07d137dae..c9aa7611e408 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -432,6 +432,7 @@ static int map_sg_data(struct scsi_cmnd *cmd, sdev_printk(KERN_ERR, cmd->device, "Can't allocate memory " "for indirect table\n"); + scsi_dma_unmap(cmd); return 0; } } diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 257c24115de9..809d32d95c76 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1998,6 +1998,8 @@ int iscsi_host_add(struct Scsi_Host *shost, struct device *pdev) if (!shost->can_queue) shost->can_queue = ISCSI_DEF_XMIT_CMDS_MAX; + if (!shost->transportt->eh_timed_out) + shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out; return scsi_add_host(shost, pdev); } EXPORT_SYMBOL_GPL(iscsi_host_add); @@ -2020,7 +2022,6 @@ struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, shost = scsi_host_alloc(sht, sizeof(struct iscsi_host) + dd_data_size); if (!shost) return NULL; - shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out; if (qdepth > ISCSI_MAX_CMD_PER_LUN || qdepth < 1) { if (qdepth != 0) diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index a8f30bdaff69..a7302480bc4a 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -5258,6 +5258,7 @@ lpfc_send_els_event(struct lpfc_vport *vport, sizeof(struct lpfc_name)); break; default: + kfree(els_data); return; } memcpy(els_data->wwpn, &ndlp->nlp_portname, sizeof(struct lpfc_name)); diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 33a3c13fd893..f4c57227ec18 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1265,13 +1265,6 @@ qla24xx_vport_delete(struct fc_vport *fc_vport) test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags)) msleep(1000); - if (ha->mqenable) { - if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS) - qla_printk(KERN_WARNING, ha, - "Queue delete failed.\n"); - vha->req_ques[0] = ha->req_q_map[0]->id; - } - qla24xx_disable_vp(vha); fc_remove_host(vha->host); @@ -1293,6 +1286,12 @@ qla24xx_vport_delete(struct fc_vport *fc_vport) vha->host_no, vha->vp_idx, vha)); } + if (ha->mqenable) { + if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS) + qla_printk(KERN_WARNING, ha, + "Queue delete failed.\n"); + } + scsi_host_put(vha->host); qla_printk(KERN_INFO, ha, "vport %d deleted\n", id); return 0; diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 023ee77fb027..e0c5bb54b258 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2135,6 +2135,7 @@ struct qla_msix_entry { /* Work events. */ enum qla_work_type { QLA_EVT_AEN, + QLA_EVT_IDC_ACK, }; @@ -2149,6 +2150,10 @@ struct qla_work_evt { enum fc_host_event_code code; u32 data; } aen; + struct { +#define QLA_IDC_ACK_REGS 7 + uint16_t mb[QLA_IDC_ACK_REGS]; + } idc_ack; } u; }; diff --git a/drivers/scsi/qla2xxx/qla_devtbl.h b/drivers/scsi/qla2xxx/qla_devtbl.h index d78d35e681ab..d6ea69df7c5c 100644 --- a/drivers/scsi/qla2xxx/qla_devtbl.h +++ b/drivers/scsi/qla2xxx/qla_devtbl.h @@ -72,7 +72,7 @@ static char *qla2x00_model_name[QLA_MODEL_NAMES*2] = { "QLA2462", "Sun PCI-X 2.0 to 4Gb FC, Dual Channel", /* 0x141 */ "QLE2460", "Sun PCI-Express to 2Gb FC, Single Channel", /* 0x142 */ "QLE2462", "Sun PCI-Express to 4Gb FC, Single Channel", /* 0x143 */ - "QEM2462" "Server I/O Module 4Gb FC, Dual Channel", /* 0x144 */ + "QEM2462", "Server I/O Module 4Gb FC, Dual Channel", /* 0x144 */ "QLE2440", "PCI-Express to 4Gb FC, Single Channel", /* 0x145 */ "QLE2464", "PCI-Express to 4Gb FC, Quad Channel", /* 0x146 */ "QLA2440", "PCI-X 2.0 to 4Gb FC, Single Channel", /* 0x147 */ diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 7abb045a0410..ffff42554087 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -1402,6 +1402,8 @@ struct access_chip_rsp_84xx { #define MBA_IDC_NOTIFY 0x8101 #define MBA_IDC_TIME_EXT 0x8102 +#define MBC_IDC_ACK 0x101 + struct nvram_81xx { /* NVRAM header. */ uint8_t id[4]; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index a336b4bc81a7..6de283f8f111 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -72,6 +72,7 @@ extern int qla2x00_loop_reset(scsi_qla_host_t *); extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int); extern int qla2x00_post_aen_work(struct scsi_qla_host *, enum fc_host_event_code, u32); +extern int qla2x00_post_idc_ack_work(struct scsi_qla_host *, uint16_t *); extern void qla2x00_abort_fcport_cmds(fc_port_t *); extern struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *, @@ -266,6 +267,8 @@ qla2x00_set_idma_speed(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t *); extern int qla84xx_verify_chip(struct scsi_qla_host *, uint16_t *); +extern int qla81xx_idc_ack(scsi_qla_host_t *, uint16_t *); + /* * Global Function Prototypes in qla_isr.c source file. */ @@ -376,10 +379,8 @@ extern int qla2x00_dfs_remove(scsi_qla_host_t *); /* Globa function prototypes for multi-q */ extern int qla25xx_request_irq(struct rsp_que *); -extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *, - uint8_t); -extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *, - uint8_t); +extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *); +extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *); extern int qla25xx_create_req_que(struct qla_hw_data *, uint16_t, uint8_t, uint16_t, uint8_t, uint8_t); extern int qla25xx_create_rsp_que(struct qla_hw_data *, uint16_t, uint8_t, diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index f6368a1d3021..986501759ad4 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1226,9 +1226,8 @@ qla24xx_config_rings(struct scsi_qla_host *vha) icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_18); - icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_22); + icb->firmware_options_2 &= __constant_cpu_to_le32(~BIT_22); icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_23); - ha->rsp_q_map[0]->options = icb->firmware_options_2; WRT_REG_DWORD(®->isp25mq.req_q_in, 0); WRT_REG_DWORD(®->isp25mq.req_q_out, 0); @@ -3493,7 +3492,7 @@ qla25xx_init_queues(struct qla_hw_data *ha) rsp = ha->rsp_q_map[i]; if (rsp) { rsp->options &= ~BIT_0; - ret = qla25xx_init_rsp_que(base_vha, rsp, rsp->options); + ret = qla25xx_init_rsp_que(base_vha, rsp); if (ret != QLA_SUCCESS) DEBUG2_17(printk(KERN_WARNING "%s Rsp que:%d init failed\n", __func__, @@ -3507,7 +3506,7 @@ qla25xx_init_queues(struct qla_hw_data *ha) if (req) { /* Clear outstanding commands array. */ req->options &= ~BIT_0; - ret = qla25xx_init_req_que(base_vha, req, req->options); + ret = qla25xx_init_req_que(base_vha, req); if (ret != QLA_SUCCESS) DEBUG2_17(printk(KERN_WARNING "%s Req que:%d init failed\n", __func__, diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index e28ad81baf1e..f250e5b7897c 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -266,6 +266,40 @@ qla2x00_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0) } } +static void +qla81xx_idc_event(scsi_qla_host_t *vha, uint16_t aen, uint16_t descr) +{ + static char *event[] = + { "Complete", "Request Notification", "Time Extension" }; + int rval; + struct device_reg_24xx __iomem *reg24 = &vha->hw->iobase->isp24; + uint16_t __iomem *wptr; + uint16_t cnt, timeout, mb[QLA_IDC_ACK_REGS]; + + /* Seed data -- mailbox1 -> mailbox7. */ + wptr = (uint16_t __iomem *)®24->mailbox1; + for (cnt = 0; cnt < QLA_IDC_ACK_REGS; cnt++, wptr++) + mb[cnt] = RD_REG_WORD(wptr); + + DEBUG2(printk("scsi(%ld): Inter-Driver Commucation %s -- " + "%04x %04x %04x %04x %04x %04x %04x.\n", vha->host_no, + event[aen & 0xff], + mb[0], mb[1], mb[2], mb[3], mb[4], mb[5], mb[6])); + + /* Acknowledgement needed? [Notify && non-zero timeout]. */ + timeout = (descr >> 8) & 0xf; + if (aen != MBA_IDC_NOTIFY || !timeout) + return; + + DEBUG2(printk("scsi(%ld): Inter-Driver Commucation %s -- " + "ACK timeout=%d.\n", vha->host_no, event[aen & 0xff], timeout)); + + rval = qla2x00_post_idc_ack_work(vha, mb); + if (rval != QLA_SUCCESS) + qla_printk(KERN_WARNING, vha->hw, + "IDC failed to post ACK.\n"); +} + /** * qla2x00_async_event() - Process aynchronous events. * @ha: SCSI driver HA context @@ -714,21 +748,9 @@ skip_rio: "%04x %04x %04x\n", vha->host_no, mb[1], mb[2], mb[3])); break; case MBA_IDC_COMPLETE: - DEBUG2(printk("scsi(%ld): Inter-Driver Commucation " - "Complete -- %04x %04x %04x\n", vha->host_no, mb[1], mb[2], - mb[3])); - break; case MBA_IDC_NOTIFY: - DEBUG2(printk("scsi(%ld): Inter-Driver Commucation " - "Request Notification -- %04x %04x %04x\n", vha->host_no, - mb[1], mb[2], mb[3])); - /**** Mailbox registers 4 - 7 valid!!! */ - break; case MBA_IDC_TIME_EXT: - DEBUG2(printk("scsi(%ld): Inter-Driver Commucation " - "Time Extension -- %04x %04x %04x\n", vha->host_no, mb[1], - mb[2], mb[3])); - /**** Mailbox registers 4 - 7 valid!!! */ + qla81xx_idc_event(vha, mb[0], mb[1]); break; } @@ -1707,7 +1729,6 @@ qla25xx_msix_rsp_q(int irq, void *dev_id) struct qla_hw_data *ha; struct rsp_que *rsp; struct device_reg_24xx __iomem *reg; - uint16_t msix_disabled_hccr = 0; rsp = (struct rsp_que *) dev_id; if (!rsp) { @@ -1720,17 +1741,8 @@ qla25xx_msix_rsp_q(int irq, void *dev_id) spin_lock_irq(&ha->hardware_lock); - msix_disabled_hccr = rsp->options; - if (!rsp->id) - msix_disabled_hccr &= __constant_cpu_to_le32(BIT_22); - else - msix_disabled_hccr &= __constant_cpu_to_le32(BIT_6); - qla24xx_process_response_queue(rsp); - if (!msix_disabled_hccr) - WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); - spin_unlock_irq(&ha->hardware_lock); return IRQ_HANDLED; diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index f94ffbb98e95..4c7504cb3990 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -3090,8 +3090,7 @@ verify_done: } int -qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req, - uint8_t options) +qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req) { int rval; unsigned long flags; @@ -3101,7 +3100,7 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req, struct qla_hw_data *ha = vha->hw; mcp->mb[0] = MBC_INITIALIZE_MULTIQ; - mcp->mb[1] = options; + mcp->mb[1] = req->options; mcp->mb[2] = MSW(LSD(req->dma)); mcp->mb[3] = LSW(LSD(req->dma)); mcp->mb[6] = MSW(MSD(req->dma)); @@ -3128,7 +3127,7 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req, mcp->tov = 60; spin_lock_irqsave(&ha->hardware_lock, flags); - if (!(options & BIT_0)) { + if (!(req->options & BIT_0)) { WRT_REG_DWORD(®->req_q_in, 0); WRT_REG_DWORD(®->req_q_out, 0); } @@ -3142,8 +3141,7 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req, } int -qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp, - uint8_t options) +qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp) { int rval; unsigned long flags; @@ -3153,7 +3151,7 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp, struct qla_hw_data *ha = vha->hw; mcp->mb[0] = MBC_INITIALIZE_MULTIQ; - mcp->mb[1] = options; + mcp->mb[1] = rsp->options; mcp->mb[2] = MSW(LSD(rsp->dma)); mcp->mb[3] = LSW(LSD(rsp->dma)); mcp->mb[6] = MSW(MSD(rsp->dma)); @@ -3178,7 +3176,7 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp, mcp->tov = 60; spin_lock_irqsave(&ha->hardware_lock, flags); - if (!(options & BIT_0)) { + if (!(rsp->options & BIT_0)) { WRT_REG_DWORD(®->rsp_q_out, 0); WRT_REG_DWORD(®->rsp_q_in, 0); } @@ -3193,3 +3191,29 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp, return rval; } +int +qla81xx_idc_ack(scsi_qla_host_t *vha, uint16_t *mb) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); + + mcp->mb[0] = MBC_IDC_ACK; + memcpy(&mcp->mb[1], mb, QLA_IDC_ACK_REGS * sizeof(uint16_t)); + mcp->out_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; + mcp->in_mb = MBX_0; + mcp->tov = MBX_TOV_SECONDS; + mcp->flags = 0; + rval = qla2x00_mailbox_command(vha, mcp); + + if (rval != QLA_SUCCESS) { + DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__, + vha->host_no, rval, mcp->mb[0])); + } else { + DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); + } + + return rval; +} diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index f53179c46423..3f23932210c4 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -396,7 +396,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport) qla2x00_start_timer(vha, qla2x00_timer, WATCH_INTERVAL); - memset(vha->req_ques, 0, sizeof(vha->req_ques) * QLA_MAX_HOST_QUES); + memset(vha->req_ques, 0, sizeof(vha->req_ques)); vha->req_ques[0] = ha->req_q_map[0]->id; host->can_queue = ha->req_q_map[0]->length + 128; host->this_id = 255; @@ -471,7 +471,7 @@ qla25xx_delete_req_que(struct scsi_qla_host *vha, struct req_que *req) if (req) { req->options |= BIT_0; - ret = qla25xx_init_req_que(vha, req, req->options); + ret = qla25xx_init_req_que(vha, req); } if (ret == QLA_SUCCESS) qla25xx_free_req_que(vha, req); @@ -486,7 +486,7 @@ qla25xx_delete_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp) if (rsp) { rsp->options |= BIT_0; - ret = qla25xx_init_rsp_que(vha, rsp, rsp->options); + ret = qla25xx_init_rsp_que(vha, rsp); } if (ret == QLA_SUCCESS) qla25xx_free_rsp_que(vha, rsp); @@ -502,7 +502,7 @@ int qla25xx_update_req_que(struct scsi_qla_host *vha, uint8_t que, uint8_t qos) req->options |= BIT_3; req->qos = qos; - ret = qla25xx_init_req_que(vha, req, req->options); + ret = qla25xx_init_req_que(vha, req); if (ret != QLA_SUCCESS) DEBUG2_17(printk(KERN_WARNING "%s failed\n", __func__)); /* restore options bit */ @@ -632,7 +632,7 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options, req->max_q_depth = ha->req_q_map[0]->max_q_depth; mutex_unlock(&ha->vport_lock); - ret = qla25xx_init_req_que(base_vha, req, options); + ret = qla25xx_init_req_que(base_vha, req); if (ret != QLA_SUCCESS) { qla_printk(KERN_WARNING, ha, "%s failed\n", __func__); mutex_lock(&ha->vport_lock); @@ -710,7 +710,7 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options, if (ret) goto que_failed; - ret = qla25xx_init_rsp_que(base_vha, rsp, options); + ret = qla25xx_init_rsp_que(base_vha, rsp); if (ret != QLA_SUCCESS) { qla_printk(KERN_WARNING, ha, "%s failed\n", __func__); mutex_lock(&ha->vport_lock); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index c11f872d3e10..2f5f72531e23 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2522,6 +2522,19 @@ qla2x00_post_aen_work(struct scsi_qla_host *vha, enum fc_host_event_code code, return qla2x00_post_work(vha, e, 1); } +int +qla2x00_post_idc_ack_work(struct scsi_qla_host *vha, uint16_t *mb) +{ + struct qla_work_evt *e; + + e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK, 1); + if (!e) + return QLA_FUNCTION_FAILED; + + memcpy(e->u.idc_ack.mb, mb, QLA_IDC_ACK_REGS * sizeof(uint16_t)); + return qla2x00_post_work(vha, e, 1); +} + static void qla2x00_do_work(struct scsi_qla_host *vha) { @@ -2539,6 +2552,9 @@ qla2x00_do_work(struct scsi_qla_host *vha) fc_host_post_event(vha->host, fc_get_event_number(), e->u.aen.code, e->u.aen.data); break; + case QLA_EVT_IDC_ACK: + qla81xx_idc_ack(vha, e->u.idc_ack.mb); + break; } if (e->flags & QLA_EVT_FLAG_FREE) kfree(e); diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 9c3b694c049d..284827926eff 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -684,7 +684,7 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr) "end=0x%x size=0x%x.\n", le32_to_cpu(region->code), start, le32_to_cpu(region->end) >> 2, le32_to_cpu(region->size))); - switch (le32_to_cpu(region->code)) { + switch (le32_to_cpu(region->code) & 0xff) { case FLT_REG_FW: ha->flt_region_fw = start; break; diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index cfa4c11a4797..79f7053da99b 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.00-k2" +#define QLA2XXX_VERSION "8.03.00-k3" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 66505bb79410..8f4de20c9deb 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -317,6 +317,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, return sdev; out_device_destroy: + scsi_device_set_state(sdev, SDEV_DEL); transport_destroy_device(&sdev->sdev_gendev); put_device(&sdev->sdev_gendev); out: diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 8f0bd3f7a59f..516925d8b570 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1078,7 +1078,7 @@ sg_ioctl(struct inode *inode, struct file *filp, case BLKTRACESETUP: return blk_trace_setup(sdp->device->request_queue, sdp->disk->disk_name, - sdp->device->sdev_gendev.devt, + MKDEV(SCSI_GENERIC_MAJOR, sdp->index), (char *)arg); case BLKTRACESTART: return blk_trace_startstop(sdp->device->request_queue, 1); diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 0d934bfbdd9b..b4b39811b445 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2083,6 +2083,20 @@ static int serial8250_startup(struct uart_port *port) serial8250_set_mctrl(&up->port, up->port.mctrl); + /* Serial over Lan (SoL) hack: + Intel 8257x Gigabit ethernet chips have a + 16550 emulation, to be used for Serial Over Lan. + Those chips take a longer time than a normal + serial device to signalize that a transmission + data was queued. Due to that, the above test generally + fails. One solution would be to delay the reading of + iir. However, this is not reliable, since the timeout + is variable. So, let's just don't test if we receive + TX irq. This way, we'll never enable UART_BUG_TXEN. + */ + if (up->port.flags & UPF_NO_TXEN_TEST) + goto dont_test_tx_en; + /* * Do a quick test to see if we receive an * interrupt when we enable the TX irq. @@ -2102,6 +2116,7 @@ static int serial8250_startup(struct uart_port *port) up->bugs &= ~UART_BUG_TXEN; } +dont_test_tx_en: spin_unlock_irqrestore(&up->port.lock, flags); /* diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 536d8e510f66..533f82025adf 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -798,6 +798,21 @@ pci_default_setup(struct serial_private *priv, return setup_port(priv, port, bar, offset, board->reg_shift); } +static int skip_tx_en_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + port->flags |= UPF_NO_TXEN_TEST; + printk(KERN_DEBUG "serial8250: skipping TxEn test for device " + "[%04x:%04x] subsystem [%04x:%04x]\n", + priv->dev->vendor, + priv->dev->device, + priv->dev->subsystem_vendor, + priv->dev->subsystem_device); + + return pci_default_setup(priv, board, port, idx); +} + /* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B @@ -864,6 +879,27 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .init = pci_inteli960ni_init, .setup = pci_default_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_8257X_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573L_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573E_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, /* * ITE */ diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 89362d733d62..8f58f7ff0dd7 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -877,6 +877,10 @@ static int atmel_startup(struct uart_port *port) } } + /* Save current CSR for comparison in atmel_tasklet_func() */ + atmel_port->irq_status_prev = UART_GET_CSR(port); + atmel_port->irq_status = atmel_port->irq_status_prev; + /* * Finally, enable the serial port */ diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index 92187e28608a..ac79cbe4c2cf 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -84,6 +84,8 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) brd->pci_dev = pdev; if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM) brd->maxports = 4; + else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8) + brd->maxports = 8; else brd->maxports = 2; @@ -212,6 +214,7 @@ static struct pci_device_id jsm_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 }, { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 }, { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 }, { 0, } }; MODULE_DEVICE_TABLE(pci, jsm_pci_tbl); diff --git a/drivers/spi/spi_gpio.c b/drivers/spi/spi_gpio.c index 49698cabc30d..f5ed9721aabb 100644 --- a/drivers/spi/spi_gpio.c +++ b/drivers/spi/spi_gpio.c @@ -114,7 +114,7 @@ static inline void setmosi(const struct spi_device *spi, int is_on) static inline int getmiso(const struct spi_device *spi) { - return gpio_get_value(SPI_MISO_GPIO); + return !!gpio_get_value(SPI_MISO_GPIO); } #undef pdata diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index c54fc40458b1..a4301dc02d27 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -298,19 +298,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); /** - * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled - * @dev: USB Host Controller being resumed - * - * Store this function in the HCD's struct pci_driver as .resume_early. - */ -int usb_hcd_pci_resume_early(struct pci_dev *dev) -{ - pci_restore_state(dev); - return 0; -} -EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early); - -/** * usb_hcd_pci_resume - power management resume of a PCI-based HCD * @dev: USB Host Controller being resumed * @@ -333,6 +320,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev) } #endif + pci_restore_state(dev); + hcd = pci_get_drvdata(dev); if (hcd->state != HC_STATE_SUSPENDED) { dev_dbg(hcd->self.controller, diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 5b94a56bec23..f750eb1ab595 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev); #ifdef CONFIG_PM extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg); -extern int usb_hcd_pci_resume_early(struct pci_dev *dev); extern int usb_hcd_pci_resume(struct pci_dev *dev); #endif /* CONFIG_PM */ diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 9b36205c5759..0ce4e2819847 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -904,8 +904,8 @@ static void pxa25x_ep_fifo_flush(struct usb_ep *_ep) /* most IN status is the same, but ISO can't stall */ *ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR - | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) - ? 0 : UDCCS_BI_SST; + | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC + ? 0 : UDCCS_BI_SST); } diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index bb21fb0a4969..abb9a7706ec7 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif .shutdown = usb_hcd_pci_shutdown, diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 5d625c3fd423..f9961b4c0da3 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 944f7e0ca4df..cf5e4cf7ea42 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif /* PM */ }; diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index 2291c5f5af51..958751ccea43 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -227,13 +227,13 @@ void scan_async_work(struct work_struct *work) * Now that the ASL is updated, complete the removal of any * removed qsets. */ - spin_lock(&whc->lock); + spin_lock_irq(&whc->lock); list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) { qset_remove_complete(whc, qset); } - spin_unlock(&whc->lock); + spin_unlock_irq(&whc->lock); } /** diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index 7dc85a0bee7c..df8b85f07092 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -255,13 +255,13 @@ void scan_periodic_work(struct work_struct *work) * Now that the PZL is updated, complete the removal of any * removed qsets. */ - spin_lock(&whc->lock); + spin_lock_irq(&whc->lock); list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) { qset_remove_complete(whc, qset); } - spin_unlock(&whc->lock); + spin_unlock_irq(&whc->lock); } /** diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index bf0af660df8a..fb19803060cf 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1054,10 +1054,7 @@ config FB_RIVA_BACKLIGHT config FB_I810 tristate "Intel 810/815 support (EXPERIMENTAL)" - depends on EXPERIMENTAL && PCI && X86_32 - select AGP - select AGP_INTEL - select FB + depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -1120,10 +1117,7 @@ config FB_CARILLO_RANCH config FB_INTEL tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)" - depends on EXPERIMENTAL && PCI && X86 - select FB - select AGP - select AGP_INTEL + depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 8058572a7428..018850c116c6 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -841,7 +841,7 @@ static int tt_detect(void) tt_dmasnd.ctrl = DMASND_CTRL_OFF; udelay(20); /* wait a while for things to settle down */ } - mono_moni = (mfp.par_dt_reg & 0x80) == 0; + mono_moni = (st_mfp.par_dt_reg & 0x80) == 0; tt_get_par(&par); tt_encode_var(&atafb_predefined[0], &par); @@ -2035,7 +2035,7 @@ static int stste_detect(void) tt_dmasnd.ctrl = DMASND_CTRL_OFF; udelay(20); /* wait a while for things to settle down */ } - mono_moni = (mfp.par_dt_reg & 0x80) == 0; + mono_moni = (st_mfp.par_dt_reg & 0x80) == 0; stste_get_par(&par); stste_encode_var(&atafb_predefined[0], &par); @@ -2086,20 +2086,20 @@ static void st_ovsc_switch(void) return; local_irq_save(flags); - mfp.tim_ct_b = 0x10; - mfp.active_edge |= 8; - mfp.tim_ct_b = 0; - mfp.tim_dt_b = 0xf0; - mfp.tim_ct_b = 8; - while (mfp.tim_dt_b > 1) /* TOS does it this way, don't ask why */ + st_mfp.tim_ct_b = 0x10; + st_mfp.active_edge |= 8; + st_mfp.tim_ct_b = 0; + st_mfp.tim_dt_b = 0xf0; + st_mfp.tim_ct_b = 8; + while (st_mfp.tim_dt_b > 1) /* TOS does it this way, don't ask why */ ; - new = mfp.tim_dt_b; + new = st_mfp.tim_dt_b; do { udelay(LINE_DELAY); old = new; - new = mfp.tim_dt_b; + new = st_mfp.tim_dt_b; } while (old != new); - mfp.tim_ct_b = 0x10; + st_mfp.tim_ct_b = 0x10; udelay(SYNC_DELAY); if (atari_switches & ATARI_SWITCH_OVSC_IKBD) diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c index e6e299feb51b..2181ce4d7ebd 100644 --- a/drivers/video/aty/aty128fb.c +++ b/drivers/video/aty/aty128fb.c @@ -2365,7 +2365,6 @@ static void fbcon_aty128_bmove(struct display *p, int sy, int sx, int dy, int dx static void aty128_set_suspend(struct aty128fb_par *par, int suspend) { u32 pmgt; - u16 pwr_command; struct pci_dev *pdev = par->pdev; if (!par->pm_reg) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 09a3d5522b43..325c10ff6a2c 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -406,7 +406,7 @@ config ITCO_WDT ---help--- Hardware driver for the intel TCO timer based watchdog devices. These drivers are included in the Intel 82801 I/O Controller - Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB + Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB controller hub. The TCO (Total Cost of Ownership) timer is a watchdog timer diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index 5531691f46ea..e35d54589232 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -107,10 +107,10 @@ static int at91_wdt_close(struct inode *inode, struct file *file) static int at91_wdt_settimeout(int new_time) { /* - * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz + * All counting occurs at SLOW_CLOCK / 128 = 256 Hz * * Since WDV is a 16-bit counter, the maximum period is - * 65536 / 0.256 = 256 seconds. + * 65536 / 256 = 256 seconds. */ if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) return -EINVAL; diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c index b1da287f90ec..a56ac84381b1 100644 --- a/drivers/watchdog/at91sam9_wdt.c +++ b/drivers/watchdog/at91sam9_wdt.c @@ -18,6 +18,7 @@ #include <linux/errno.h> #include <linux/fs.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/kernel.h> #include <linux/miscdevice.h> #include <linux/module.h> diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c index 2474ebca88f6..d8264ad0be41 100644 --- a/drivers/watchdog/iTCO_vendor_support.c +++ b/drivers/watchdog/iTCO_vendor_support.c @@ -1,7 +1,7 @@ /* * intel TCO vendor specific watchdog driver support * - * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>. + * (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -19,7 +19,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_vendor_support" -#define DRV_VERSION "1.02" +#define DRV_VERSION "1.03" #define PFX DRV_NAME ": " /* Includes */ @@ -77,6 +77,26 @@ MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (n * 20.6 seconds. */ +static void supermicro_old_pre_start(unsigned long acpibase) +{ + unsigned long val32; + + /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ + val32 = inl(SMI_EN); + val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ + outl(val32, SMI_EN); /* Needed to activate watchdog */ +} + +static void supermicro_old_pre_stop(unsigned long acpibase) +{ + unsigned long val32; + + /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */ + val32 = inl(SMI_EN); + val32 |= 0x00002000; /* Turn on SMI clearing watchdog */ + outl(val32, SMI_EN); /* Needed to deactivate watchdog */ +} + static void supermicro_old_pre_keepalive(unsigned long acpibase) { /* Reload TCO Timer (done in iTCO_wdt_keepalive) + */ @@ -228,14 +248,18 @@ static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat) void iTCO_vendor_pre_start(unsigned long acpibase, unsigned int heartbeat) { - if (vendorsupport == SUPERMICRO_NEW_BOARD) + if (vendorsupport == SUPERMICRO_OLD_BOARD) + supermicro_old_pre_start(acpibase); + else if (vendorsupport == SUPERMICRO_NEW_BOARD) supermicro_new_pre_start(heartbeat); } EXPORT_SYMBOL(iTCO_vendor_pre_start); void iTCO_vendor_pre_stop(unsigned long acpibase) { - if (vendorsupport == SUPERMICRO_NEW_BOARD) + if (vendorsupport == SUPERMICRO_OLD_BOARD) + supermicro_old_pre_stop(acpibase); + else if (vendorsupport == SUPERMICRO_NEW_BOARD) supermicro_new_pre_stop(); } EXPORT_SYMBOL(iTCO_vendor_pre_stop); diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index 5b395a4ddfdf..352334947ea3 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -1,7 +1,7 @@ /* - * intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets) + * intel TCO Watchdog Driver (Used in i82801 and i63xxESB chipsets) * - * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>. + * (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -63,7 +63,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" -#define DRV_VERSION "1.04" +#define DRV_VERSION "1.05" #define PFX DRV_NAME ": " /* Includes */ @@ -236,16 +236,16 @@ MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); /* Address definitions for the TCO */ /* TCO base address */ -#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 +#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 /* SMI Control and Enable Register */ -#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 +#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 #define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Curr. Value */ #define TCOv1_TMR TCOBASE + 0x01 /* TCOv1 Timer Initial Value */ -#define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */ -#define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */ -#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ -#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */ +#define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */ +#define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */ +#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ +#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */ #define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */ #define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */ #define TCOv2_TMR TCOBASE + 0x12 /* TCOv2 Timer Initial Value */ @@ -338,7 +338,6 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void) static int iTCO_wdt_start(void) { unsigned int val; - unsigned long val32; spin_lock(&iTCO_wdt_private.io_lock); @@ -351,11 +350,6 @@ static int iTCO_wdt_start(void) return -EIO; } - /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ - val32 = inl(SMI_EN); - val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ - outl(val32, SMI_EN); - /* Force the timer to its reload value by writing to the TCO_RLD register */ if (iTCO_wdt_private.iTCO_version == 2) @@ -378,7 +372,6 @@ static int iTCO_wdt_start(void) static int iTCO_wdt_stop(void) { unsigned int val; - unsigned long val32; spin_lock(&iTCO_wdt_private.io_lock); @@ -390,11 +383,6 @@ static int iTCO_wdt_stop(void) outw(val, TCO1_CNT); val = inw(TCO1_CNT); - /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */ - val32 = inl(SMI_EN); - val32 |= 0x00002000; - outl(val32, SMI_EN); - /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ iTCO_wdt_set_NO_REBOOT_bit(); @@ -649,6 +637,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, int ret; u32 base_address; unsigned long RCBA; + unsigned long val32; /* * Find the ACPI/PM base I/O address which is the base @@ -695,6 +684,10 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, ret = -EIO; goto out; } + /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ + val32 = inl(SMI_EN); + val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ + outl(val32, SMI_EN); /* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */ diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index 9b91617b9582..56892a142ee2 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -45,6 +45,13 @@ static int xen_suspend(void *data) err); return err; } + err = sysdev_suspend(PMSG_SUSPEND); + if (err) { + printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n", + err); + device_power_up(PMSG_RESUME); + return err; + } xen_mm_pin_all(); gnttab_suspend(); @@ -61,6 +68,7 @@ static int xen_suspend(void *data) gnttab_resume(); xen_mm_unpin_all(); + sysdev_resume(); device_power_up(PMSG_RESUME); if (!*cancelled) { |