summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorAndrea Adami <andrea.adami@gmail.com>2014-06-02 23:38:35 +0200
committerBrian Norris <computersforpeace@gmail.com>2014-07-14 07:22:47 +0200
commit812c5fa82bae9f377f49000d7636c19a8b61735c (patch)
treeb76ab01d4047051cc21867e69e4138e270decce4 /drivers
parentmtd: nand: reduce the warning noise when the ECC is too weak (diff)
downloadlinux-812c5fa82bae9f377f49000d7636c19a8b61735c.tar.xz
linux-812c5fa82bae9f377f49000d7636c19a8b61735c.zip
mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR
This family of chips was long ago supported by the pre-cfi driver. CFI code tested on several Zaurus SL-5500 (Collie) 2x16 on 32 bit bus. Function is_LH28F640BF() mimics is_m29ew() from cmdset_0002.c Buffer write fixes as seen in 2007 patch c/o Anti Sullin <anti.sullin <at> artecdesign.ee> http://comments.gmane.org/gmane.linux.ports.arm.kernel/36733 [Brian: this patch is semi-urgent, because the following patch switches to using CFI detection for a chip which (until now) is unsupported by the CFI driver 9218310 ARM: 8084/1: sa1100: collie: revert back to cfi_probe ] Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0001.c43
1 files changed, 43 insertions, 0 deletions
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index e4ec355704a6..a7543ba3e190 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -52,6 +52,11 @@
/* Atmel chips */
#define AT49BV640D 0x02de
#define AT49BV640DT 0x02db
+/* Sharp chips */
+#define LH28F640BFHE_PTTL90 0x00b0
+#define LH28F640BFHE_PBTL90 0x00b1
+#define LH28F640BFHE_PTTL70A 0x00b2
+#define LH28F640BFHE_PBTL70A 0x00b3
static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -258,6 +263,36 @@ static void fixup_st_m28w320cb(struct mtd_info *mtd)
(cfi->cfiq->EraseRegionInfo[1] & 0xffff0000) | 0x3e;
};
+static int is_LH28F640BF(struct cfi_private *cfi)
+{
+ /* Sharp LH28F640BF Family */
+ if (cfi->mfr == CFI_MFR_SHARP && (
+ cfi->id == LH28F640BFHE_PTTL90 || cfi->id == LH28F640BFHE_PBTL90 ||
+ cfi->id == LH28F640BFHE_PTTL70A || cfi->id == LH28F640BFHE_PBTL70A))
+ return 1;
+ return 0;
+}
+
+static void fixup_LH28F640BF(struct mtd_info *mtd)
+{
+ struct map_info *map = mtd->priv;
+ struct cfi_private *cfi = map->fldrv_priv;
+ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
+
+ /* Reset the Partition Configuration Register on LH28F640BF
+ * to a single partition (PCR = 0x000): PCR is embedded into A0-A15. */
+ if (is_LH28F640BF(cfi)) {
+ printk(KERN_INFO "Reset Partition Config. Register: 1 Partition of 4 planes\n");
+ map_write(map, CMD(0x60), 0);
+ map_write(map, CMD(0x04), 0);
+
+ /* We have set one single partition thus
+ * Simultaneous Operations are not allowed */
+ printk(KERN_INFO "cfi_cmdset_0001: Simultaneous Operations disabled\n");
+ extp->FeatureSupport &= ~512;
+ }
+}
+
static void fixup_use_point(struct mtd_info *mtd)
{
struct map_info *map = mtd->priv;
@@ -309,6 +344,8 @@ static struct cfi_fixup cfi_fixup_table[] = {
{ CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct },
{ CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb },
{ CFI_MFR_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock },
+ { CFI_MFR_SHARP, CFI_ID_ANY, fixup_unlock_powerup_lock },
+ { CFI_MFR_SHARP, CFI_ID_ANY, fixup_LH28F640BF },
{ 0, 0, NULL }
};
@@ -1649,6 +1686,12 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
initial_adr = adr;
cmd_adr = adr & ~(wbufsize-1);
+ /* Sharp LH28F640BF chips need the first address for the
+ * Page Buffer Program command. See Table 5 of
+ * LH28F320BF, LH28F640BF, LH28F128BF Series (Appendix FUM00701) */
+ if (is_LH28F640BF(cfi))
+ cmd_adr = adr;
+
/* Let's determine this according to the interleave only once */
write_cmd = (cfi->cfiq->P_ID != P_ID_INTEL_PERFORMANCE) ? CMD(0xe8) : CMD(0xe9);