diff options
author | Rabin Vincent <rabin.vincent@stericsson.com> | 2010-05-19 11:39:02 +0200 |
---|---|---|
committer | Samuel Ortiz <sameo@linux.intel.com> | 2010-05-28 01:38:00 +0200 |
commit | 62579266cf9caca5b999560be2b5ceee42fc4d4d (patch) | |
tree | eda6066624c734ef3057a9dc568ebaf978499c1a /drivers | |
parent | gpio: Fix inverted rdc321x gpio data out registers (diff) | |
download | linux-62579266cf9caca5b999560be2b5ceee42fc4d4d.tar.xz linux-62579266cf9caca5b999560be2b5ceee42fc4d4d.zip |
mfd: New AB8500 driver
Add a new driver to support the AB8500 Power Management chip, replacing
the current AB4500. The new driver replaces the old one, instead of an
incremental modification, because this is a substantial overhaul
including:
- Split of the driver into -core and -spi portions, to allow another
interface layer to be added
- Addition of interrupt support
- Switch to MFD core API for handling subdevices
- Simplification of the APIs to remove a redundant block parameter
- Rename of the APIs and macros from ab4500_* to ab8500_*
- Rename of the files from ab4500* to ab8500*
- Change of the driver name from ab4500 to ab8500
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mfd/Kconfig | 9 | ||||
-rw-r--r-- | drivers/mfd/Makefile | 2 | ||||
-rw-r--r-- | drivers/mfd/ab4500-core.c | 209 | ||||
-rw-r--r-- | drivers/mfd/ab8500-core.c | 444 | ||||
-rw-r--r-- | drivers/mfd/ab8500-spi.c | 133 |
5 files changed, 583 insertions, 214 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b84b7078e909..9da0e504bbe9 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -420,11 +420,12 @@ config EZX_PCAP This enables the PCAP ASIC present on EZX Phones. This is needed for MMC, TouchScreen, Sound, USB, etc.. -config AB4500_CORE - tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip" - depends on SPI +config AB8500_CORE + bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" + depends on SPI=y && GENERIC_HARDIRQS + select MFD_CORE help - Select this option to enable access to AB4500 power management + Select this option to enable access to AB8500 power management chip. This connects to U8500 on the SSP/SPI bus and exports read/write functions for the devices to get access to this chip. This chip embeds various other multimedia funtionalities as well. diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index ca1517e948af..fb503e77dc60 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -64,8 +64,8 @@ obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o obj-$(CONFIG_ABX500_CORE) += abx500-core.o obj-$(CONFIG_AB3100_CORE) += ab3100-core.o obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o -obj-$(CONFIG_AB4500_CORE) += ab4500-core.o obj-$(CONFIG_AB3550_CORE) += ab3550-core.o +obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-spi.o obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o obj-$(CONFIG_PMIC_ADP5520) += adp5520.o obj-$(CONFIG_LPC_SCH) += lpc_sch.o diff --git a/drivers/mfd/ab4500-core.c b/drivers/mfd/ab4500-core.c deleted file mode 100644 index c275daa3ab1a..000000000000 --- a/drivers/mfd/ab4500-core.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation. - * - * AB4500 is a companion power management chip used with U8500. - * On this platform, this is interfaced with SSP0 controller - * which is a ARM primecell pl022. - * - * At the moment the module just exports read/write features. - * Interrupt management to be added - TODO. - */ -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/mfd/ab4500.h> - -/* just required if probe fails, we need to - * unregister the device - */ -static struct spi_driver ab4500_driver; - -/* - * This funtion writes to any AB4500 registers using - * SPI protocol & before it writes it packs the data - * in the below 24 bit frame format - * - * *|------------------------------------| - * *| 23|22...18|17.......10|9|8|7......0| - * *| r/w bank adr data | - * * ------------------------------------ - * - * This function shouldn't be called from interrupt - * context - */ -int ab4500_write(struct ab4500 *ab4500, unsigned char block, - unsigned long addr, unsigned char data) -{ - struct spi_transfer xfer; - struct spi_message msg; - int err; - unsigned long spi_data = - block << 18 | addr << 10 | data; - - mutex_lock(&ab4500->lock); - ab4500->tx_buf[0] = spi_data; - ab4500->rx_buf[0] = 0; - - xfer.tx_buf = ab4500->tx_buf; - xfer.rx_buf = NULL; - xfer.len = sizeof(unsigned long); - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - - err = spi_sync(ab4500->spi, &msg); - mutex_unlock(&ab4500->lock); - - return err; -} -EXPORT_SYMBOL(ab4500_write); - -int ab4500_read(struct ab4500 *ab4500, unsigned char block, - unsigned long addr) -{ - struct spi_transfer xfer; - struct spi_message msg; - unsigned long spi_data = - 1 << 23 | block << 18 | addr << 10; - - mutex_lock(&ab4500->lock); - ab4500->tx_buf[0] = spi_data; - ab4500->rx_buf[0] = 0; - - xfer.tx_buf = ab4500->tx_buf; - xfer.rx_buf = ab4500->rx_buf; - xfer.len = sizeof(unsigned long); - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - - spi_sync(ab4500->spi, &msg); - mutex_unlock(&ab4500->lock); - - return ab4500->rx_buf[0]; -} -EXPORT_SYMBOL(ab4500_read); - -/* ref: ab3100 core */ -#define AB4500_DEVICE(devname, devid) \ -static struct platform_device ab4500_##devname##_device = { \ - .name = devid, \ - .id = -1, \ -} - -/* list of childern devices of ab4500 - all are - * not populated here - TODO - */ -AB4500_DEVICE(charger, "ab4500-charger"); -AB4500_DEVICE(audio, "ab4500-audio"); -AB4500_DEVICE(usb, "ab4500-usb"); -AB4500_DEVICE(tvout, "ab4500-tvout"); -AB4500_DEVICE(sim, "ab4500-sim"); -AB4500_DEVICE(gpadc, "ab4500-gpadc"); -AB4500_DEVICE(clkmgt, "ab4500-clkmgt"); -AB4500_DEVICE(misc, "ab4500-misc"); - -static struct platform_device *ab4500_platform_devs[] = { - &ab4500_charger_device, - &ab4500_audio_device, - &ab4500_usb_device, - &ab4500_tvout_device, - &ab4500_sim_device, - &ab4500_gpadc_device, - &ab4500_clkmgt_device, - &ab4500_misc_device, -}; - -static int __init ab4500_probe(struct spi_device *spi) -{ - struct ab4500 *ab4500; - unsigned char revision; - int err = 0; - int i; - - ab4500 = kzalloc(sizeof *ab4500, GFP_KERNEL); - if (!ab4500) { - dev_err(&spi->dev, "could not allocate AB4500\n"); - err = -ENOMEM; - goto not_detect; - } - - ab4500->spi = spi; - spi_set_drvdata(spi, ab4500); - - mutex_init(&ab4500->lock); - - /* read the revision register */ - revision = ab4500_read(ab4500, AB4500_MISC, AB4500_REV_REG); - - /* revision id 0x0 is for early drop, 0x10 is for cut1.0 */ - if (revision == 0x0 || revision == 0x10) - dev_info(&spi->dev, "Detected chip: %s, revision = %x\n", - ab4500_driver.driver.name, revision); - else { - dev_err(&spi->dev, "unknown chip: 0x%x\n", revision); - goto not_detect; - } - - for (i = 0; i < ARRAY_SIZE(ab4500_platform_devs); i++) { - ab4500_platform_devs[i]->dev.parent = - &spi->dev; - platform_set_drvdata(ab4500_platform_devs[i], ab4500); - } - - /* register the ab4500 platform devices */ - platform_add_devices(ab4500_platform_devs, - ARRAY_SIZE(ab4500_platform_devs)); - - return err; - - not_detect: - spi_unregister_driver(&ab4500_driver); - kfree(ab4500); - return err; -} - -static int __devexit ab4500_remove(struct spi_device *spi) -{ - struct ab4500 *ab4500 = - spi_get_drvdata(spi); - - kfree(ab4500); - - return 0; -} - -static struct spi_driver ab4500_driver = { - .driver = { - .name = "ab4500", - .owner = THIS_MODULE, - }, - .probe = ab4500_probe, - .remove = __devexit_p(ab4500_remove) -}; - -static int __devinit ab4500_init(void) -{ - return spi_register_driver(&ab4500_driver); -} - -static void __exit ab4500_exit(void) -{ - spi_unregister_driver(&ab4500_driver); -} - -subsys_initcall(ab4500_init); -module_exit(ab4500_exit); - -MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com"); -MODULE_DESCRIPTION("AB4500 core driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c new file mode 100644 index 000000000000..f3d26fa9c34d --- /dev/null +++ b/drivers/mfd/ab8500-core.c @@ -0,0 +1,444 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> + * Author: Rabin Vincent <rabin.vincent@stericsson.com> + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/mfd/core.h> +#include <linux/mfd/ab8500.h> + +/* + * Interrupt register offsets + * Bank : 0x0E + */ +#define AB8500_IT_SOURCE1_REG 0x0E00 +#define AB8500_IT_SOURCE2_REG 0x0E01 +#define AB8500_IT_SOURCE3_REG 0x0E02 +#define AB8500_IT_SOURCE4_REG 0x0E03 +#define AB8500_IT_SOURCE5_REG 0x0E04 +#define AB8500_IT_SOURCE6_REG 0x0E05 +#define AB8500_IT_SOURCE7_REG 0x0E06 +#define AB8500_IT_SOURCE8_REG 0x0E07 +#define AB8500_IT_SOURCE19_REG 0x0E12 +#define AB8500_IT_SOURCE20_REG 0x0E13 +#define AB8500_IT_SOURCE21_REG 0x0E14 +#define AB8500_IT_SOURCE22_REG 0x0E15 +#define AB8500_IT_SOURCE23_REG 0x0E16 +#define AB8500_IT_SOURCE24_REG 0x0E17 + +/* + * latch registers + */ +#define AB8500_IT_LATCH1_REG 0x0E20 +#define AB8500_IT_LATCH2_REG 0x0E21 +#define AB8500_IT_LATCH3_REG 0x0E22 +#define AB8500_IT_LATCH4_REG 0x0E23 +#define AB8500_IT_LATCH5_REG 0x0E24 +#define AB8500_IT_LATCH6_REG 0x0E25 +#define AB8500_IT_LATCH7_REG 0x0E26 +#define AB8500_IT_LATCH8_REG 0x0E27 +#define AB8500_IT_LATCH9_REG 0x0E28 +#define AB8500_IT_LATCH10_REG 0x0E29 +#define AB8500_IT_LATCH19_REG 0x0E32 +#define AB8500_IT_LATCH20_REG 0x0E33 +#define AB8500_IT_LATCH21_REG 0x0E34 +#define AB8500_IT_LATCH22_REG 0x0E35 +#define AB8500_IT_LATCH23_REG 0x0E36 +#define AB8500_IT_LATCH24_REG 0x0E37 + +/* + * mask registers + */ + +#define AB8500_IT_MASK1_REG 0x0E40 +#define AB8500_IT_MASK2_REG 0x0E41 +#define AB8500_IT_MASK3_REG 0x0E42 +#define AB8500_IT_MASK4_REG 0x0E43 +#define AB8500_IT_MASK5_REG 0x0E44 +#define AB8500_IT_MASK6_REG 0x0E45 +#define AB8500_IT_MASK7_REG 0x0E46 +#define AB8500_IT_MASK8_REG 0x0E47 +#define AB8500_IT_MASK9_REG 0x0E48 +#define AB8500_IT_MASK10_REG 0x0E49 +#define AB8500_IT_MASK11_REG 0x0E4A +#define AB8500_IT_MASK12_REG 0x0E4B +#define AB8500_IT_MASK13_REG 0x0E4C +#define AB8500_IT_MASK14_REG 0x0E4D +#define AB8500_IT_MASK15_REG 0x0E4E +#define AB8500_IT_MASK16_REG 0x0E4F +#define AB8500_IT_MASK17_REG 0x0E50 +#define AB8500_IT_MASK18_REG 0x0E51 +#define AB8500_IT_MASK19_REG 0x0E52 +#define AB8500_IT_MASK20_REG 0x0E53 +#define AB8500_IT_MASK21_REG 0x0E54 +#define AB8500_IT_MASK22_REG 0x0E55 +#define AB8500_IT_MASK23_REG 0x0E56 +#define AB8500_IT_MASK24_REG 0x0E57 + +#define AB8500_REV_REG 0x1080 + +/* + * Map interrupt numbers to the LATCH and MASK register offsets, Interrupt + * numbers are indexed into this array with (num / 8). + * + * This is one off from the register names, i.e. AB8500_IT_MASK1_REG is at + * offset 0. + */ +static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = { + 0, 1, 2, 3, 4, 6, 7, 8, 9, 18, 19, 20, 21, +}; + +static int __ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data) +{ + int ret; + + dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data); + + ret = ab8500->write(ab8500, addr, data); + if (ret < 0) + dev_err(ab8500->dev, "failed to write reg %#x: %d\n", + addr, ret); + + return ret; +} + +/** + * ab8500_write() - write an AB8500 register + * @ab8500: device to write to + * @addr: address of the register + * @data: value to write + */ +int ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data) +{ + int ret; + + mutex_lock(&ab8500->lock); + ret = __ab8500_write(ab8500, addr, data); + mutex_unlock(&ab8500->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(ab8500_write); + +static int __ab8500_read(struct ab8500 *ab8500, u16 addr) +{ + int ret; + + ret = ab8500->read(ab8500, addr); + if (ret < 0) + dev_err(ab8500->dev, "failed to read reg %#x: %d\n", + addr, ret); + + dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret); + + return ret; +} + +/** + * ab8500_read() - read an AB8500 register + * @ab8500: device to read from + * @addr: address of the register + */ +int ab8500_read(struct ab8500 *ab8500, u16 addr) +{ + int ret; + + mutex_lock(&ab8500->lock); + ret = __ab8500_read(ab8500, addr); + mutex_unlock(&ab8500->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(ab8500_read); + +/** + * ab8500_set_bits() - set a bitfield in an AB8500 register + * @ab8500: device to read from + * @addr: address of the register + * @mask: mask of the bitfield to modify + * @data: value to set to the bitfield + */ +int ab8500_set_bits(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data) +{ + int ret; + + mutex_lock(&ab8500->lock); + + ret = __ab8500_read(ab8500, addr); + if (ret < 0) + goto out; + + ret &= ~mask; + ret |= data; + + ret = __ab8500_write(ab8500, addr, ret); + +out: + mutex_unlock(&ab8500->lock); + return ret; +} +EXPORT_SYMBOL_GPL(ab8500_set_bits); + +static void ab8500_irq_lock(unsigned int irq) +{ + struct ab8500 *ab8500 = get_irq_chip_data(irq); + + mutex_lock(&ab8500->irq_lock); +} + +static void ab8500_irq_sync_unlock(unsigned int irq) +{ + struct ab8500 *ab8500 = get_irq_chip_data(irq); + int i; + + for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { + u8 old = ab8500->oldmask[i]; + u8 new = ab8500->mask[i]; + int reg; + + if (new == old) + continue; + + ab8500->oldmask[i] = new; + + reg = AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i]; + ab8500_write(ab8500, reg, new); + } + + mutex_unlock(&ab8500->irq_lock); +} + +static void ab8500_irq_mask(unsigned int irq) +{ + struct ab8500 *ab8500 = get_irq_chip_data(irq); + int offset = irq - ab8500->irq_base; + int index = offset / 8; + int mask = 1 << (offset % 8); + + ab8500->mask[index] |= mask; +} + +static void ab8500_irq_unmask(unsigned int irq) +{ + struct ab8500 *ab8500 = get_irq_chip_data(irq); + int offset = irq - ab8500->irq_base; + int index = offset / 8; + int mask = 1 << (offset % 8); + + ab8500->mask[index] &= ~mask; +} + +static struct irq_chip ab8500_irq_chip = { + .name = "ab8500", + .bus_lock = ab8500_irq_lock, + .bus_sync_unlock = ab8500_irq_sync_unlock, + .mask = ab8500_irq_mask, + .unmask = ab8500_irq_unmask, +}; + +static irqreturn_t ab8500_irq(int irq, void *dev) +{ + struct ab8500 *ab8500 = dev; + int i; + + dev_vdbg(ab8500->dev, "interrupt\n"); + + for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { + int regoffset = ab8500_irq_regoffset[i]; + int status; + + status = ab8500_read(ab8500, AB8500_IT_LATCH1_REG + regoffset); + if (status <= 0) + continue; + + do { + int bit = __ffs(status); + int line = i * 8 + bit; + + handle_nested_irq(ab8500->irq_base + line); + status &= ~(1 << bit); + } while (status); + } + + return IRQ_HANDLED; +} + +static int ab8500_irq_init(struct ab8500 *ab8500) +{ + int base = ab8500->irq_base; + int irq; + + for (irq = base; irq < base + AB8500_NR_IRQS; irq++) { + set_irq_chip_data(irq, ab8500); + set_irq_chip_and_handler(irq, &ab8500_irq_chip, + handle_simple_irq); + set_irq_nested_thread(irq, 1); +#ifdef CONFIG_ARM + set_irq_flags(irq, IRQF_VALID); +#else + set_irq_noprobe(irq); +#endif + } + + return 0; +} + +static void ab8500_irq_remove(struct ab8500 *ab8500) +{ + int base = ab8500->irq_base; + int irq; + + for (irq = base; irq < base + AB8500_NR_IRQS; irq++) { +#ifdef CONFIG_ARM + set_irq_flags(irq, 0); +#endif + set_irq_chip_and_handler(irq, NULL, NULL); + set_irq_chip_data(irq, NULL); + } +} + +static struct resource ab8500_gpadc_resources[] = { + { + .name = "HW_CONV_END", + .start = AB8500_INT_GP_HW_ADC_CONV_END, + .end = AB8500_INT_GP_HW_ADC_CONV_END, + .flags = IORESOURCE_IRQ, + }, + { + .name = "SW_CONV_END", + .start = AB8500_INT_GP_SW_ADC_CONV_END, + .end = AB8500_INT_GP_SW_ADC_CONV_END, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource ab8500_rtc_resources[] = { + { + .name = "60S", + .start = AB8500_INT_RTC_60S, + .end = AB8500_INT_RTC_60S, + .flags = IORESOURCE_IRQ, + }, + { + .name = "ALARM", + .start = AB8500_INT_RTC_ALARM, + .end = AB8500_INT_RTC_ALARM, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell ab8500_devs[] = { + { + .name = "ab8500-gpadc", + .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), + .resources = ab8500_gpadc_resources, + }, + { + .name = "ab8500-rtc", + .num_resources = ARRAY_SIZE(ab8500_rtc_resources), + .resources = ab8500_rtc_resources, + }, + { .name = "ab8500-charger", }, + { .name = "ab8500-audio", }, + { .name = "ab8500-usb", }, + { .name = "ab8500-pwm", }, +}; + +int __devinit ab8500_init(struct ab8500 *ab8500) +{ + struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev); + int ret; + int i; + + if (plat) + ab8500->irq_base = plat->irq_base; + + mutex_init(&ab8500->lock); + mutex_init(&ab8500->irq_lock); + + ret = ab8500_read(ab8500, AB8500_REV_REG); + if (ret < 0) + return ret; + + /* + * 0x0 - Early Drop + * 0x10 - Cut 1.0 + * 0x11 - Cut 1.1 + */ + if (ret == 0x0 || ret == 0x10 || ret == 0x11) { + ab8500->revision = ret; + dev_info(ab8500->dev, "detected chip, revision: %#x\n", ret); + } else { + dev_err(ab8500->dev, "unknown chip, revision: %#x\n", ret); + return -EINVAL; + } + + if (plat && plat->init) + plat->init(ab8500); + + /* Clear and mask all interrupts */ + for (i = 0; i < 10; i++) { + ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i); + ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff); + } + + for (i = 18; i < 24; i++) { + ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i); + ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff); + } + + for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) + ab8500->mask[i] = ab8500->oldmask[i] = 0xff; + + if (ab8500->irq_base) { + ret = ab8500_irq_init(ab8500); + if (ret) + return ret; + + ret = request_threaded_irq(ab8500->irq, NULL, ab8500_irq, + IRQF_ONESHOT, "ab8500", ab8500); + if (ret) + goto out_removeirq; + } + + ret = mfd_add_devices(ab8500->dev, -1, ab8500_devs, + ARRAY_SIZE(ab8500_devs), NULL, + ab8500->irq_base); + if (ret) + goto out_freeirq; + + return ret; + +out_freeirq: + if (ab8500->irq_base) { + free_irq(ab8500->irq, ab8500); +out_removeirq: + ab8500_irq_remove(ab8500); + } + return ret; +} + +int __devexit ab8500_exit(struct ab8500 *ab8500) +{ + mfd_remove_devices(ab8500->dev); + if (ab8500->irq_base) { + free_irq(ab8500->irq, ab8500); + ab8500_irq_remove(ab8500); + } + + return 0; +} + +MODULE_AUTHOR("Srinidhi Kasagar, Rabin Vincent"); +MODULE_DESCRIPTION("AB8500 MFD core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/ab8500-spi.c b/drivers/mfd/ab8500-spi.c new file mode 100644 index 000000000000..b81d4f768ef6 --- /dev/null +++ b/drivers/mfd/ab8500-spi.c @@ -0,0 +1,133 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/mfd/ab8500.h> + +/* + * This funtion writes to any AB8500 registers using + * SPI protocol & before it writes it packs the data + * in the below 24 bit frame format + * + * *|------------------------------------| + * *| 23|22...18|17.......10|9|8|7......0| + * *| r/w bank adr data | + * * ------------------------------------ + * + * This function shouldn't be called from interrupt + * context + */ +static int ab8500_spi_write(struct ab8500 *ab8500, u16 addr, u8 data) +{ + struct spi_device *spi = container_of(ab8500->dev, struct spi_device, + dev); + unsigned long spi_data = addr << 10 | data; + struct spi_transfer xfer; + struct spi_message msg; + + ab8500->tx_buf[0] = spi_data; + ab8500->rx_buf[0] = 0; + + xfer.tx_buf = ab8500->tx_buf; + xfer.rx_buf = NULL; + xfer.len = sizeof(unsigned long); + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + return spi_sync(spi, &msg); +} + +static int ab8500_spi_read(struct ab8500 *ab8500, u16 addr) +{ + struct spi_device *spi = container_of(ab8500->dev, struct spi_device, + dev); + unsigned long spi_data = 1 << 23 | addr << 10; + struct spi_transfer xfer; + struct spi_message msg; + int ret; + + ab8500->tx_buf[0] = spi_data; + ab8500->rx_buf[0] = 0; + + xfer.tx_buf = ab8500->tx_buf; + xfer.rx_buf = ab8500->rx_buf; + xfer.len = sizeof(unsigned long); + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + ret = spi_sync(spi, &msg); + if (!ret) + ret = ab8500->rx_buf[0]; + + return ret; +} + +static int __devinit ab8500_spi_probe(struct spi_device *spi) +{ + struct ab8500 *ab8500; + int ret; + + ab8500 = kzalloc(sizeof *ab8500, GFP_KERNEL); + if (!ab8500) + return -ENOMEM; + + ab8500->dev = &spi->dev; + ab8500->irq = spi->irq; + + ab8500->read = ab8500_spi_read; + ab8500->write = ab8500_spi_write; + + spi_set_drvdata(spi, ab8500); + + ret = ab8500_init(ab8500); + if (ret) + kfree(ab8500); + + return ret; +} + +static int __devexit ab8500_spi_remove(struct spi_device *spi) +{ + struct ab8500 *ab8500 = spi_get_drvdata(spi); + + ab8500_exit(ab8500); + kfree(ab8500); + + return 0; +} + +static struct spi_driver ab8500_spi_driver = { + .driver = { + .name = "ab8500", + .owner = THIS_MODULE, + }, + .probe = ab8500_spi_probe, + .remove = __devexit_p(ab8500_spi_remove) +}; + +static int __init ab8500_spi_init(void) +{ + return spi_register_driver(&ab8500_spi_driver); +} +subsys_initcall(ab8500_spi_init); + +static void __exit ab8500_spi_exit(void) +{ + spi_unregister_driver(&ab8500_spi_driver); +} +module_exit(ab8500_spi_exit); + +MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com"); +MODULE_DESCRIPTION("AB8500 SPI"); +MODULE_LICENSE("GPL v2"); |