Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (62 commits)
  Input: atkbd - release previously reserved keycodes 248 - 254
  Input: add KEY_WPS_BUTTON definition
  Input: ads7846 - add regulator support
  Input: winbond-cir - fix suspend/resume
  Input: gamecon - use pr_err() and friends
  Input: gamecon - constify some of the setup structures
  Input: gamecon - simplify pad type handling
  Input: gamecon - simplify coordinate calculation for PSX
  Input: gamecon - fix some formatting issues
  Input: gamecon - add rumble support for N64 pads
  Input: wacom - add device type to device name string
  Input: s3c24xx_ts - report touch only when stylus is down
  Input: s3c24xx_ts - re-enable IRQ on resume
  Input: wacom - constify product features data
  Input: wacom - use per-device instance of wacom_features
  Input: sh_keysc - enable building on SH-Mobile ARM
  Input: wacom - get features from driver info
  Input: rotary-encoder - set gpio direction for each requested gpio
  Input: sh_keysc - update the driver with mode 6
  Input: sh_keysc - switch to using bitmaps
  ...

44 files changed, 3092 insertions, 1301 deletions

diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index f706b1dffdb3..ada25bb8941e 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -1185,11 +1185,6 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
 
 	rep = (down == 2);
 
-#ifdef CONFIG_MAC_EMUMOUSEBTN
-	if (mac_hid_mouse_emulate_buttons(1, keycode, down))
-		return;
-#endif /* CONFIG_MAC_EMUMOUSEBTN */
-
 	if ((raw_mode = (kbd->kbdmode == VC_RAW)) && !hw_raw)
 		if (emulate_raw(vc, keycode, !down << 7))
 			if (keycode < BTN_MISC && printk_ratelimit())
@@ -1328,6 +1323,21 @@ static void kbd_event(struct input_handle *handle, unsigned int event_type,
 	schedule_console_callback();
 }
 
+static bool kbd_match(struct input_handler *handler, struct input_dev *dev)
+{
+	int i;
+
+	if (test_bit(EV_SND, dev->evbit))
+		return true;
+
+	if (test_bit(EV_KEY, dev->evbit))
+		for (i = KEY_RESERVED; i < BTN_MISC; i++)
+			if (test_bit(i, dev->keybit))
+				return true;
+
+	return false;
+}
+
 /*
  * When a keyboard (or other input device) is found, the kbd_connect
  * function is called. The function then looks at the device, and if it
@@ -1339,14 +1349,6 @@ static int kbd_connect(struct input_handler *handler, struct input_dev *dev,
 {
 	struct input_handle *handle;
 	int error;
-	int i;
-
-	for (i = KEY_RESERVED; i < BTN_MISC; i++)
-		if (test_bit(i, dev->keybit))
-			break;
-
-	if (i == BTN_MISC && !test_bit(EV_SND, dev->evbit))
-		return -ENODEV;
 
 	handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL);
 	if (!handle)
@@ -1412,6 +1414,7 @@ MODULE_DEVICE_TABLE(input, kbd_ids);
 
 static struct input_handler kbd_handler = {
 	.event		= kbd_event,
+	.match		= kbd_match,
 	.connect	= kbd_connect,
 	.disconnect	= kbd_disconnect,
 	.start		= kbd_start,
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 258c639571b5..9f9816baeb97 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -278,6 +278,8 @@ static int evdev_open(struct inode *inode, struct file *file)
 		goto err_free_client;
 
 	file->private_data = client;
+	nonseekable_open(inode, file);
+
 	return 0;
 
  err_free_client:
diff --git a/drivers/input/gameport/emu10k1-gp.c b/drivers/input/gameport/emu10k1-gp.c
index b04930f7ea7d..7392992da424 100644
--- a/drivers/input/gameport/emu10k1-gp.c
+++ b/drivers/input/gameport/emu10k1-gp.c
@@ -46,7 +46,7 @@ struct emu {
 	int size;
 };
 
-static struct pci_device_id emu_tbl[] = {
+static const struct pci_device_id emu_tbl[] = {
 
 	{ 0x1102, 0x7002, PCI_ANY_ID, PCI_ANY_ID }, /* SB Live gameport */
 	{ 0x1102, 0x7003, PCI_ANY_ID, PCI_ANY_ID }, /* Audigy gameport */
diff --git a/drivers/input/gameport/fm801-gp.c b/drivers/input/gameport/fm801-gp.c
index 8a1810f88b9e..14d3f3e208a2 100644
--- a/drivers/input/gameport/fm801-gp.c
+++ b/drivers/input/gameport/fm801-gp.c
@@ -140,7 +140,7 @@ static void __devexit fm801_gp_remove(struct pci_dev *pci)
 	}
 }
 
-static struct pci_device_id fm801_gp_id_table[] = {
+static const struct pci_device_id fm801_gp_id_table[] = {
 	{ PCI_VENDOR_ID_FORTEMEDIA, PCI_DEVICE_ID_FM801_GP, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0  },
 	{ 0 }
 };
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index ac11be08585e..7e18bcf05a66 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -11,6 +11,8 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/stddef.h>
 #include <linux/module.h>
 #include <linux/ioport.h>
@@ -190,9 +192,8 @@ static int gameport_bind_driver(struct gameport *gameport, struct gameport_drive
 
 	error = device_bind_driver(&gameport->dev);
 	if (error) {
-		printk(KERN_WARNING
-			"gameport: device_bind_driver() failed "
-			"for %s (%s) and %s, error: %d\n",
+		dev_warn(&gameport->dev,
+			 "device_bind_driver() failed for %s (%s) and %s, error: %d\n",
 			gameport->phys, gameport->name,
 			drv->description, error);
 		drv->disconnect(gameport);
@@ -209,9 +210,9 @@ static void gameport_find_driver(struct gameport *gameport)
 
 	error = device_attach(&gameport->dev);
 	if (error < 0)
-		printk(KERN_WARNING
-			"gameport: device_attach() failed for %s (%s), error: %d\n",
-			gameport->phys, gameport->name, error);
+		dev_warn(&gameport->dev,
+			 "device_attach() failed for %s (%s), error: %d\n",
+			 gameport->phys, gameport->name, error);
 }
 
 
@@ -262,17 +263,14 @@ static int gameport_queue_event(void *object, struct module *owner,
 
 	event = kmalloc(sizeof(struct gameport_event), GFP_ATOMIC);
 	if (!event) {
-		printk(KERN_ERR
-			"gameport: Not enough memory to queue event %d\n",
-			event_type);
+		pr_err("Not enough memory to queue event %d\n", event_type);
 		retval = -ENOMEM;
 		goto out;
 	}
 
 	if (!try_module_get(owner)) {
-		printk(KERN_WARNING
-			"gameport: Can't get module reference, dropping event %d\n",
-			event_type);
+		pr_warning("Can't get module reference, dropping event %d\n",
+			   event_type);
 		kfree(event);
 		retval = -EINVAL;
 		goto out;
@@ -298,14 +296,12 @@ static void gameport_free_event(struct gameport_event *event)
 
 static void gameport_remove_duplicate_events(struct gameport_event *event)
 {
-	struct list_head *node, *next;
-	struct gameport_event *e;
+	struct gameport_event *e, *next;
 	unsigned long flags;
 
 	spin_lock_irqsave(&gameport_event_lock, flags);
 
-	list_for_each_safe(node, next, &gameport_event_list) {
-		e = list_entry(node, struct gameport_event, node);
+	list_for_each_entry_safe(e, next, &gameport_event_list, node) {
 		if (event->object == e->object) {
 			/*
 			 * If this event is of different type we should not
@@ -315,7 +311,7 @@ static void gameport_remove_duplicate_events(struct gameport_event *event)
 			if (event->type != e->type)
 				break;
 
-			list_del_init(node);
+			list_del_init(&e->node);
 			gameport_free_event(e);
 		}
 	}
@@ -325,23 +321,18 @@ static void gameport_remove_duplicate_events(struct gameport_event *event)
 
 static struct gameport_event *gameport_get_event(void)
 {
-	struct gameport_event *event;
-	struct list_head *node;
+	struct gameport_event *event = NULL;
 	unsigned long flags;
 
 	spin_lock_irqsave(&gameport_event_lock, flags);
 
-	if (list_empty(&gameport_event_list)) {
-		spin_unlock_irqrestore(&gameport_event_lock, flags);
-		return NULL;
+	if (!list_empty(&gameport_event_list)) {
+		event = list_first_entry(&gameport_event_list,
+					 struct gameport_event, node);
+		list_del_init(&event->node);
 	}
 
-	node = gameport_event_list.next;
-	event = list_entry(node, struct gameport_event, node);
-	list_del_init(node);
-
 	spin_unlock_irqrestore(&gameport_event_lock, flags);
-
 	return event;
 }
 
@@ -360,16 +351,14 @@ static void gameport_handle_event(void)
 	if ((event = gameport_get_event())) {
 
 		switch (event->type) {
-			case GAMEPORT_REGISTER_PORT:
-				gameport_add_port(event->object);
-				break;
 
-			case GAMEPORT_ATTACH_DRIVER:
-				gameport_attach_driver(event->object);
-				break;
+		case GAMEPORT_REGISTER_PORT:
+			gameport_add_port(event->object);
+			break;
 
-			default:
-				break;
+		case GAMEPORT_ATTACH_DRIVER:
+			gameport_attach_driver(event->object);
+			break;
 		}
 
 		gameport_remove_duplicate_events(event);
@@ -385,16 +374,14 @@ static void gameport_handle_event(void)
  */
 static void gameport_remove_pending_events(void *object)
 {
-	struct list_head *node, *next;
-	struct gameport_event *event;
+	struct gameport_event *event, *next;
 	unsigned long flags;
 
 	spin_lock_irqsave(&gameport_event_lock, flags);
 
-	list_for_each_safe(node, next, &gameport_event_list) {
-		event = list_entry(node, struct gameport_event, node);
+	list_for_each_entry_safe(event, next, &gameport_event_list, node) {
 		if (event->object == object) {
-			list_del_init(node);
+			list_del_init(&event->node);
 			gameport_free_event(event);
 		}
 	}
@@ -441,7 +428,6 @@ static int gameport_thread(void *nothing)
 			kthread_should_stop() || !list_empty(&gameport_event_list));
 	} while (!kthread_should_stop());
 
-	printk(KERN_DEBUG "gameport: kgameportd exiting\n");
 	return 0;
 }
 
@@ -453,6 +439,7 @@ static int gameport_thread(void *nothing)
 static ssize_t gameport_show_description(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct gameport *gameport = to_gameport_port(dev);
+
 	return sprintf(buf, "%s\n", gameport->name);
 }
 
@@ -521,7 +508,8 @@ static void gameport_init_port(struct gameport *gameport)
 
 	mutex_init(&gameport->drv_mutex);
 	device_initialize(&gameport->dev);
-	dev_set_name(&gameport->dev, "gameport%lu", (unsigned long)atomic_inc_return(&gameport_no) - 1);
+	dev_set_name(&gameport->dev, "gameport%lu",
+			(unsigned long)atomic_inc_return(&gameport_no) - 1);
 	gameport->dev.bus = &gameport_bus;
 	gameport->dev.release = gameport_release_port;
 	if (gameport->parent)
@@ -550,19 +538,17 @@ static void gameport_add_port(struct gameport *gameport)
 	list_add_tail(&gameport->node, &gameport_list);
 
 	if (gameport->io)
-		printk(KERN_INFO "gameport: %s is %s, io %#x, speed %dkHz\n",
-			gameport->name, gameport->phys, gameport->io, gameport->speed);
+		dev_info(&gameport->dev, "%s is %s, io %#x, speed %dkHz\n",
+			 gameport->name, gameport->phys, gameport->io, gameport->speed);
 	else
-		printk(KERN_INFO "gameport: %s is %s, speed %dkHz\n",
+		dev_info(&gameport->dev, "%s is %s, speed %dkHz\n",
 			gameport->name, gameport->phys, gameport->speed);
 
 	error = device_add(&gameport->dev);
 	if (error)
-		printk(KERN_ERR
-			"gameport: device_add() failed for %s (%s), error: %d\n",
+		dev_err(&gameport->dev,
+			"device_add() failed for %s (%s), error: %d\n",
 			gameport->phys, gameport->name, error);
-	else
-		gameport->registered = 1;
 }
 
 /*
@@ -584,10 +570,8 @@ static void gameport_destroy_port(struct gameport *gameport)
 		gameport->parent = NULL;
 	}
 
-	if (gameport->registered) {
+	if (device_is_registered(&gameport->dev))
 		device_del(&gameport->dev);
-		gameport->registered = 0;
-	}
 
 	list_del_init(&gameport->node);
 
@@ -705,8 +689,7 @@ static void gameport_attach_driver(struct gameport_driver *drv)
 
 	error = driver_attach(&drv->driver);
 	if (error)
-		printk(KERN_ERR
-			"gameport: driver_attach() failed for %s, error: %d\n",
+		pr_err("driver_attach() failed for %s, error: %d\n",
 			drv->driver.name, error);
 }
 
@@ -727,8 +710,7 @@ int __gameport_register_driver(struct gameport_driver *drv, struct module *owner
 
 	error = driver_register(&drv->driver);
 	if (error) {
-		printk(KERN_ERR
-			"gameport: driver_register() failed for %s, error: %d\n",
+		pr_err("driver_register() failed for %s, error: %d\n",
 			drv->driver.name, error);
 		return error;
 	}
@@ -828,7 +810,7 @@ static int __init gameport_init(void)
 
 	error = bus_register(&gameport_bus);
 	if (error) {
-		printk(KERN_ERR "gameport: failed to register gameport bus, error: %d\n", error);
+		pr_err("failed to register gameport bus, error: %d\n", error);
 		return error;
 	}
 
@@ -836,7 +818,7 @@ static int __init gameport_init(void)
 	if (IS_ERR(gameport_task)) {
 		bus_unregister(&gameport_bus);
 		error = PTR_ERR(gameport_task);
-		printk(KERN_ERR "gameport: Failed to start kgameportd, error: %d\n", error);
+		pr_err("Failed to start kgameportd, error: %d\n", error);
 		return error;
 	}
 
diff --git a/drivers/input/gameport/ns558.c b/drivers/input/gameport/ns558.c
index db556b71ddda..7c217848613e 100644
--- a/drivers/input/gameport/ns558.c
+++ b/drivers/input/gameport/ns558.c
@@ -166,7 +166,7 @@ static int ns558_isa_probe(int io)
 
 #ifdef CONFIG_PNP
 
-static struct pnp_device_id pnp_devids[] = {
+static const struct pnp_device_id pnp_devids[] = {
 	{ .id = "@P@0001", .driver_data = 0 }, /* ALS 100 */
 	{ .id = "@P@0020", .driver_data = 0 }, /* ALS 200 */
 	{ .id = "@P@1001", .driver_data = 0 }, /* ALS 100+ */
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 86cb2d2196ff..41168d5f8c17 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -87,12 +87,14 @@ static int input_defuzz_abs_event(int value, int old_val, int fuzz)
 }
 
 /*
- * Pass event through all open handles. This function is called with
+ * Pass event first through all filters and then, if event has not been
+ * filtered out, through all open handles. This function is called with
  * dev->event_lock held and interrupts disabled.
  */
 static void input_pass_event(struct input_dev *dev,
 			     unsigned int type, unsigned int code, int value)
 {
+	struct input_handler *handler;
 	struct input_handle *handle;
 
 	rcu_read_lock();
@@ -100,11 +102,25 @@ static void input_pass_event(struct input_dev *dev,
 	handle = rcu_dereference(dev->grab);
 	if (handle)
 		handle->handler->event(handle, type, code, value);
-	else
-		list_for_each_entry_rcu(handle, &dev->h_list, d_node)
-			if (handle->open)
-				handle->handler->event(handle,
-							type, code, value);
+	else {
+		bool filtered = false;
+
+		list_for_each_entry_rcu(handle, &dev->h_list, d_node) {
+			if (!handle->open)
+				continue;
+
+			handler = handle->handler;
+			if (!handler->filter) {
+				if (filtered)
+					break;
+
+				handler->event(handle, type, code, value);
+
+			} else if (handler->filter(handle, type, code, value))
+				filtered = true;
+		}
+	}
+
 	rcu_read_unlock();
 }
 
@@ -615,12 +631,12 @@ static int input_default_setkeycode(struct input_dev *dev,
 		}
 	}
 
-	clear_bit(old_keycode, dev->keybit);
-	set_bit(keycode, dev->keybit);
+	__clear_bit(old_keycode, dev->keybit);
+	__set_bit(keycode, dev->keybit);
 
 	for (i = 0; i < dev->keycodemax; i++) {
 		if (input_fetch_keycode(dev, i) == old_keycode) {
-			set_bit(old_keycode, dev->keybit);
+			__set_bit(old_keycode, dev->keybit);
 			break; /* Setting the bit twice is useless, so break */
 		}
 	}
@@ -678,6 +694,9 @@ int input_set_keycode(struct input_dev *dev, int scancode, int keycode)
 	if (retval)
 		goto out;
 
+	/* Make sure KEY_RESERVED did not get enabled. */
+	__clear_bit(KEY_RESERVED, dev->keybit);
+
 	/*
 	 * Simulate keyup event if keycode is not present
 	 * in the keymap anymore
@@ -705,12 +724,13 @@ EXPORT_SYMBOL(input_set_keycode);
 		if (i != BITS_TO_LONGS(max)) \
 			continue;
 
-static const struct input_device_id *input_match_device(const struct input_device_id *id,
+static const struct input_device_id *input_match_device(struct input_handler *handler,
 							struct input_dev *dev)
 {
+	const struct input_device_id *id;
 	int i;
 
-	for (; id->flags || id->driver_info; id++) {
+	for (id = handler->id_table; id->flags || id->driver_info; id++) {
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)
 			if (id->bustype != dev->id.bustype)
@@ -738,7 +758,8 @@ static const struct input_device_id *input_match_device(const struct input_devic
 		MATCH_BIT(ffbit,  FF_MAX);
 		MATCH_BIT(swbit,  SW_MAX);
 
-		return id;
+		if (!handler->match || handler->match(handler, dev))
+			return id;
 	}
 
 	return NULL;
@@ -749,10 +770,7 @@ static int input_attach_handler(struct input_dev *dev, struct input_handler *han
 	const struct input_device_id *id;
 	int error;
 
-	if (handler->blacklist && input_match_device(handler->blacklist, dev))
-		return -ENODEV;
-
-	id = input_match_device(handler->id_table, dev);
+	id = input_match_device(handler, dev);
 	if (!id)
 		return -ENODEV;
 
@@ -988,6 +1006,8 @@ static int input_handlers_seq_show(struct seq_file *seq, void *v)
 	union input_seq_state *state = (union input_seq_state *)&seq->private;
 
 	seq_printf(seq, "N: Number=%u Name=%s", state->pos, handler->name);
+	if (handler->filter)
+		seq_puts(seq, " (filter)");
 	if (handler->fops)
 		seq_printf(seq, " Minor=%d", handler->minor);
 	seq_putc(seq, '\n');
@@ -1551,6 +1571,25 @@ void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int
 }
 EXPORT_SYMBOL(input_set_capability);
 
+#define INPUT_CLEANSE_BITMASK(dev, type, bits)				\
+	do {								\
+		if (!test_bit(EV_##type, dev->evbit))			\
+			memset(dev->bits##bit, 0,			\
+				sizeof(dev->bits##bit));		\
+	} while (0)
+
+static void input_cleanse_bitmasks(struct input_dev *dev)
+{
+	INPUT_CLEANSE_BITMASK(dev, KEY, key);
+	INPUT_CLEANSE_BITMASK(dev, REL, rel);
+	INPUT_CLEANSE_BITMASK(dev, ABS, abs);
+	INPUT_CLEANSE_BITMASK(dev, MSC, msc);
+	INPUT_CLEANSE_BITMASK(dev, LED, led);
+	INPUT_CLEANSE_BITMASK(dev, SND, snd);
+	INPUT_CLEANSE_BITMASK(dev, FF, ff);
+	INPUT_CLEANSE_BITMASK(dev, SW, sw);
+}
+
 /**
  * input_register_device - register device with input core
  * @dev: device to be registered
@@ -1570,13 +1609,19 @@ int input_register_device(struct input_dev *dev)
 	const char *path;
 	int error;
 
+	/* Every input device generates EV_SYN/SYN_REPORT events. */
 	__set_bit(EV_SYN, dev->evbit);
 
+	/* KEY_RESERVED is not supposed to be transmitted to userspace. */
+	__clear_bit(KEY_RESERVED, dev->keybit);
+
+	/* Make sure that bitmasks not mentioned in dev->evbit are clean. */
+	input_cleanse_bitmasks(dev);
+
 	/*
 	 * If delay and period are pre-set by the driver, then autorepeating
 	 * is handled by the driver itself and we don't do it in input.c.
 	 */
-
 	init_timer(&dev->timer);
 	if (!dev->rep[REP_DELAY] && !dev->rep[REP_PERIOD]) {
 		dev->timer.data = (long) dev;
@@ -1776,7 +1821,16 @@ int input_register_handle(struct input_handle *handle)
 	error = mutex_lock_interruptible(&dev->mutex);
 	if (error)
 		return error;
-	list_add_tail_rcu(&handle->d_node, &dev->h_list);
+
+	/*
+	 * Filters go to the head of the list, normal handlers
+	 * to the tail.
+	 */
+	if (handler->filter)
+		list_add_rcu(&handle->d_node, &dev->h_list);
+	else
+		list_add_tail_rcu(&handle->d_node, &dev->h_list);
+
 	mutex_unlock(&dev->mutex);
 
 	/*
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index b1bd6dd32286..c52bec4d0530 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -286,6 +286,8 @@ static int joydev_open(struct inode *inode, struct file *file)
 		goto err_free_client;
 
 	file->private_data = client;
+	nonseekable_open(inode, file);
+
 	return 0;
 
  err_free_client:
@@ -775,6 +777,20 @@ static void joydev_cleanup(struct joydev *joydev)
 		input_close_device(handle);
 }
 
+
+static bool joydev_match(struct input_handler *handler, struct input_dev *dev)
+{
+	/* Avoid touchpads and touchscreens */
+	if (test_bit(EV_KEY, dev->evbit) && test_bit(BTN_TOUCH, dev->keybit))
+		return false;
+
+	/* Avoid tablets, digitisers and similar devices */
+	if (test_bit(EV_KEY, dev->evbit) && test_bit(BTN_DIGI, dev->keybit))
+		return false;
+
+	return true;
+}
+
 static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
 			  const struct input_device_id *id)
 {
@@ -894,22 +910,6 @@ static void joydev_disconnect(struct input_handle *handle)
 	put_device(&joydev->dev);
 }
 
-static const struct input_device_id joydev_blacklist[] = {
-	{
-		.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
-				INPUT_DEVICE_ID_MATCH_KEYBIT,
-		.evbit = { BIT_MASK(EV_KEY) },
-		.keybit = { [BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH) },
-	},	/* Avoid itouchpads and touchscreens */
-	{
-		.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
-				INPUT_DEVICE_ID_MATCH_KEYBIT,
-		.evbit = { BIT_MASK(EV_KEY) },
-		.keybit = { [BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_DIGI) },
-	},	/* Avoid tablets, digitisers and similar devices */
-	{ }	/* Terminating entry */
-};
-
 static const struct input_device_id joydev_ids[] = {
 	{
 		.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
@@ -936,13 +936,13 @@ MODULE_DEVICE_TABLE(input, joydev_ids);
 
 static struct input_handler joydev_handler = {
 	.event		= joydev_event,
+	.match		= joydev_match,
 	.connect	= joydev_connect,
 	.disconnect	= joydev_disconnect,
 	.fops		= &joydev_fops,
 	.minor		= JOYDEV_MINOR_BASE,
 	.name		= "joydev",
 	.id_table	= joydev_ids,
-	.blacklist	= joydev_blacklist,
 };
 
 static int __init joydev_init(void)
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index b11419590cfe..5b596165b571 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -221,6 +221,7 @@ config JOYSTICK_DB9
 config JOYSTICK_GAMECON
 	tristate "Multisystem, NES, SNES, N64, PSX joysticks and gamepads"
 	depends on PARPORT
+	select INPUT_FF_MEMLESS
 	---help---
 	  Say Y here if you have a Nintendo Entertainment System gamepad,
 	  Super Nintendo Entertainment System gamepad, Nintendo 64 gamepad,
diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index 07a32aff5a31..ae998d99a5ae 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -30,6 +30,8 @@
  * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/module.h>
@@ -61,48 +63,73 @@ MODULE_PARM_DESC(map3, "Describes third set of devices");
 
 /* see also gs_psx_delay parameter in PSX support section */
 
-#define GC_SNES		1
-#define GC_NES		2
-#define GC_NES4		3
-#define GC_MULTI	4
-#define GC_MULTI2	5
-#define GC_N64		6
-#define GC_PSX		7
-#define GC_DDR		8
-#define GC_SNESMOUSE	9
-
-#define GC_MAX		9
+enum gc_type {
+	GC_NONE = 0,
+	GC_SNES,
+	GC_NES,
+	GC_NES4,
+	GC_MULTI,
+	GC_MULTI2,
+	GC_N64,
+	GC_PSX,
+	GC_DDR,
+	GC_SNESMOUSE,
+	GC_MAX
+};
 
 #define GC_REFRESH_TIME	HZ/100
 
+struct gc_pad {
+	struct input_dev *dev;
+	enum gc_type type;
+	char phys[32];
+};
+
 struct gc {
 	struct pardevice *pd;
+	struct gc_pad pads[GC_MAX_DEVICES];
 	struct input_dev *dev[GC_MAX_DEVICES];
 	struct timer_list timer;
-	unsigned char pads[GC_MAX + 1];
+	int pad_count[GC_MAX];
 	int used;
 	struct mutex mutex;
-	char phys[GC_MAX_DEVICES][32];
+};
+
+struct gc_subdev {
+	unsigned int idx;
 };
 
 static struct gc *gc_base[3];
 
-static int gc_status_bit[] = { 0x40, 0x80, 0x20, 0x10, 0x08 };
+static const int gc_status_bit[] = { 0x40, 0x80, 0x20, 0x10, 0x08 };
+
+static const char *gc_names[] = {
+	NULL, "SNES pad", "NES pad", "NES FourPort", "Multisystem joystick",
+	"Multisystem 2-button joystick", "N64 controller", "PSX controller",
+	"PSX DDR controller", "SNES mouse"
+};
 
-static char *gc_names[] = { NULL, "SNES pad", "NES pad", "NES FourPort", "Multisystem joystick",
-				"Multisystem 2-button joystick", "N64 controller", "PSX controller",
-				"PSX DDR controller", "SNES mouse" };
 /*
  * N64 support.
  */
 
-static unsigned char gc_n64_bytes[] = { 0, 1, 13, 15, 14, 12, 10, 11, 2, 3 };
-static short gc_n64_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL, BTN_TR, BTN_TRIGGER, BTN_START };
+static const unsigned char gc_n64_bytes[] = { 0, 1, 13, 15, 14, 12, 10, 11, 2, 3 };
+static const short gc_n64_btn[] = {
+	BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z,
+	BTN_TL, BTN_TR, BTN_TRIGGER, BTN_START
+};
 
 #define GC_N64_LENGTH		32		/* N64 bit length, not including stop bit */
-#define GC_N64_REQUEST_LENGTH	37		/* transmit request sequence is 9 bits long */
+#define GC_N64_STOP_LENGTH	5		/* Length of encoded stop bit */
+#define GC_N64_CMD_00		0x11111111UL
+#define GC_N64_CMD_01		0xd1111111UL
+#define GC_N64_CMD_03		0xdd111111UL
+#define GC_N64_CMD_1b		0xdd1dd111UL
+#define GC_N64_CMD_c0		0x111111ddUL
+#define GC_N64_CMD_80		0x1111111dUL
+#define GC_N64_STOP_BIT		0x1d		/* Encoded stop bit */
+#define GC_N64_REQUEST_DATA	GC_N64_CMD_01	/* the request data command */
 #define GC_N64_DELAY		133		/* delay between transmit request, and response ready (us) */
-#define GC_N64_REQUEST		0x1dd1111111ULL /* the request data command (encoded for 000000011) */
 #define GC_N64_DWS		3		/* delay between write segments (required for sound playback because of ISA DMA) */
 						/* GC_N64_DWS > 24 is known to fail */
 #define GC_N64_POWER_W		0xe2		/* power during write (transmit request) */
@@ -114,8 +141,40 @@ static short gc_n64_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL,
 #define GC_N64_CLOCK		0x02		/* clock bits for read */
 
 /*
+ * Used for rumble code.
+ */
+
+/* Send encoded command */
+static void gc_n64_send_command(struct gc *gc, unsigned long cmd,
+				unsigned char target)
+{
+	struct parport *port = gc->pd->port;
+	int i;
+
+	for (i = 0; i < GC_N64_LENGTH; i++) {
+		unsigned char data = (cmd >> i) & 1 ? target : 0;
+		parport_write_data(port, GC_N64_POWER_W | data);
+		udelay(GC_N64_DWS);
+	}
+}
+
+/* Send stop bit */
+static void gc_n64_send_stop_bit(struct gc *gc, unsigned char target)
+{
+	struct parport *port = gc->pd->port;
+	int i;
+
+	for (i = 0; i < GC_N64_STOP_LENGTH; i++) {
+		unsigned char data = (GC_N64_STOP_BIT >> i) & 1 ? target : 0;
+		parport_write_data(port, GC_N64_POWER_W | data);
+		udelay(GC_N64_DWS);
+	}
+}
+
+/*
  * gc_n64_read_packet() reads an N64 packet.
- * Each pad uses one bit per byte. So all pads connected to this port are read in parallel.
+ * Each pad uses one bit per byte. So all pads connected to this port
+ * are read in parallel.
  */
 
 static void gc_n64_read_packet(struct gc *gc, unsigned char *data)
@@ -128,14 +187,13 @@ static void gc_n64_read_packet(struct gc *gc, unsigned char *data)
  */
 
 	local_irq_save(flags);
-	for (i = 0; i < GC_N64_REQUEST_LENGTH; i++) {
-		parport_write_data(gc->pd->port, GC_N64_POWER_W | ((GC_N64_REQUEST >> i) & 1 ? GC_N64_OUT : 0));
-		udelay(GC_N64_DWS);
-	}
+	gc_n64_send_command(gc, GC_N64_REQUEST_DATA, GC_N64_OUT);
+	gc_n64_send_stop_bit(gc, GC_N64_OUT);
 	local_irq_restore(flags);
 
 /*
- * Wait for the pad response to be loaded into the 33-bit register of the adapter
+ * Wait for the pad response to be loaded into the 33-bit register
+ * of the adapter.
  */
 
 	udelay(GC_N64_DELAY);
@@ -146,13 +204,15 @@ static void gc_n64_read_packet(struct gc *gc, unsigned char *data)
 
 	for (i = 0; i < GC_N64_LENGTH; i++) {
 		parport_write_data(gc->pd->port, GC_N64_POWER_R);
+		udelay(2);
 		data[i] = parport_read_status(gc->pd->port);
 		parport_write_data(gc->pd->port, GC_N64_POWER_R | GC_N64_CLOCK);
 	 }
 
 /*
- * We must wait 200 ms here for the controller to reinitialize before the next read request.
- * No worries as long as gc_read is polled less frequently than this.
+ * We must wait 200 ms here for the controller to reinitialize before
+ * the next read request. No worries as long as gc_read is polled less
+ * frequently than this.
  */
 
 }
@@ -160,45 +220,112 @@ static void gc_n64_read_packet(struct gc *gc, unsigned char *data)
 static void gc_n64_process_packet(struct gc *gc)
 {
 	unsigned char data[GC_N64_LENGTH];
-	signed char axes[2];
 	struct input_dev *dev;
 	int i, j, s;
+	signed char x, y;
 
 	gc_n64_read_packet(gc, data);
 
 	for (i = 0; i < GC_MAX_DEVICES; i++) {
 
-		dev = gc->dev[i];
-		if (!dev)
+		if (gc->pads[i].type != GC_N64)
 			continue;
 
+		dev = gc->pads[i].dev;
 		s = gc_status_bit[i];
 
-		if (s & gc->pads[GC_N64] & ~(data[8] | data[9])) {
+		if (s & ~(data[8] | data[9])) {
 
-			axes[0] = axes[1] = 0;
+			x = y = 0;
 
 			for (j = 0; j < 8; j++) {
 				if (data[23 - j] & s)
-					axes[0] |= 1 << j;
+					x |= 1 << j;
 				if (data[31 - j] & s)
-					axes[1] |= 1 << j;
+					y |= 1 << j;
 			}
 
-			input_report_abs(dev, ABS_X,  axes[0]);
-			input_report_abs(dev, ABS_Y, -axes[1]);
+			input_report_abs(dev, ABS_X,  x);
+			input_report_abs(dev, ABS_Y, -y);
 
-			input_report_abs(dev, ABS_HAT0X, !(s & data[6]) - !(s & data[7]));
-			input_report_abs(dev, ABS_HAT0Y, !(s & data[4]) - !(s & data[5]));
+			input_report_abs(dev, ABS_HAT0X,
+					 !(s & data[6]) - !(s & data[7]));
+			input_report_abs(dev, ABS_HAT0Y,
+					 !(s & data[4]) - !(s & data[5]));
 
 			for (j = 0; j < 10; j++)
-				input_report_key(dev, gc_n64_btn[j], s & data[gc_n64_bytes[j]]);
+				input_report_key(dev, gc_n64_btn[j],
+						 s & data[gc_n64_bytes[j]]);
 
 			input_sync(dev);
 		}
 	}
 }
 
+static int gc_n64_play_effect(struct input_dev *dev, void *data,
+			      struct ff_effect *effect)
+{
+	int i;
+	unsigned long flags;
+	struct gc *gc = input_get_drvdata(dev);
+	struct gc_subdev *sdev = data;
+	unsigned char target = 1 << sdev->idx; /* select desired pin */
+
+	if (effect->type == FF_RUMBLE) {
+		struct ff_rumble_effect *rumble = &effect->u.rumble;
+		unsigned int cmd =
+			rumble->strong_magnitude || rumble->weak_magnitude ?
+			GC_N64_CMD_01 : GC_N64_CMD_00;
+
+		local_irq_save(flags);
+
+		/* Init Rumble - 0x03, 0x80, 0x01, (34)0x80 */
+		gc_n64_send_command(gc, GC_N64_CMD_03, target);
+		gc_n64_send_command(gc, GC_N64_CMD_80, target);
+		gc_n64_send_command(gc, GC_N64_CMD_01, target);
+		for (i = 0; i < 32; i++)
+			gc_n64_send_command(gc, GC_N64_CMD_80, target);
+		gc_n64_send_stop_bit(gc, target);
+
+		udelay(GC_N64_DELAY);
+
+		/* Now start or stop it - 0x03, 0xc0, 0zx1b, (32)0x01/0x00 */
+		gc_n64_send_command(gc, GC_N64_CMD_03, target);
+		gc_n64_send_command(gc, GC_N64_CMD_c0, target);
+		gc_n64_send_command(gc, GC_N64_CMD_1b, target);
+		for (i = 0; i < 32; i++)
+			gc_n64_send_command(gc, cmd, target);
+		gc_n64_send_stop_bit(gc, target);
+
+		local_irq_restore(flags);
+
+	}
+
+	return 0;
+}
+
+static int __init gc_n64_init_ff(struct input_dev *dev, int i)
+{
+	struct gc_subdev *sdev;
+	int err;
+
+	sdev = kmalloc(sizeof(*sdev), GFP_KERNEL);
+	if (!sdev)
+		return -ENOMEM;
+
+	sdev->idx = i;
+
+	input_set_capability(dev, EV_FF, FF_RUMBLE);
+
+	err = input_ff_create_memless(dev, sdev, gc_n64_play_effect);
+	if (err) {
+		kfree(sdev);
+		return err;
+	}
+
+	return 0;
+}
+
 /*
  * NES/SNES support.
  */
@@ -214,9 +341,11 @@ static void gc_n64_process_packet(struct gc *gc)
 #define GC_NES_CLOCK	0x01
 #define GC_NES_LATCH	0x02
 
-static unsigned char gc_nes_bytes[] = { 0, 1, 2, 3 };
-static unsigned char gc_snes_bytes[] = { 8, 0, 2, 3, 9, 1, 10, 11 };
-static short gc_snes_btn[] = { BTN_A, BTN_B, BTN_SELECT, BTN_START, BTN_X, BTN_Y, BTN_TL, BTN_TR };
+static const unsigned char gc_nes_bytes[] = { 0, 1, 2, 3 };
+static const unsigned char gc_snes_bytes[] = { 8, 0, 2, 3, 9, 1, 10, 11 };
+static const short gc_snes_btn[] = {
+	BTN_A, BTN_B, BTN_SELECT, BTN_START, BTN_X, BTN_Y, BTN_TL, BTN_TR
+};
 
 /*
  * gc_nes_read_packet() reads a NES/SNES packet.
@@ -244,40 +373,51 @@ static void gc_nes_read_packet(struct gc *gc, int length, unsigned char *data)
 static void gc_nes_process_packet(struct gc *gc)
 {
 	unsigned char data[GC_SNESMOUSE_LENGTH];
+	struct gc_pad *pad;
 	struct input_dev *dev;
 	int i, j, s, len;
 	char x_rel, y_rel;
 
-	len = gc->pads[GC_SNESMOUSE] ? GC_SNESMOUSE_LENGTH :
-			(gc->pads[GC_SNES] ? GC_SNES_LENGTH : GC_NES_LENGTH);
+	len = gc->pad_count[GC_SNESMOUSE] ? GC_SNESMOUSE_LENGTH :
+			(gc->pad_count[GC_SNES] ? GC_SNES_LENGTH : GC_NES_LENGTH);
 
 	gc_nes_read_packet(gc, len, data);
 
 	for (i = 0; i < GC_MAX_DEVICES; i++) {
 
+		pad = &gc->pads[i];
 		dev = gc->dev[i];
-		if (!dev)
-			continue;
-
 		s = gc_status_bit[i];
 
-		if (s & (gc->pads[GC_NES] | gc->pads[GC_SNES])) {
+		switch (pad->type) {
+
+		case GC_NES:
+
 			input_report_abs(dev, ABS_X, !(s & data[6]) - !(s & data[7]));
 			input_report_abs(dev, ABS_Y, !(s & data[4]) - !(s & data[5]));
-		}
 
-		if (s & gc->pads[GC_NES])
 			for (j = 0; j < 4; j++)
-				input_report_key(dev, gc_snes_btn[j], s & data[gc_nes_bytes[j]]);
+				input_report_key(dev, gc_snes_btn[j],
+						 s & data[gc_nes_bytes[j]]);
+			input_sync(dev);
+			break;
+
+		case GC_SNES:
+
+			input_report_abs(dev, ABS_X, !(s & data[6]) - !(s & data[7]));
+			input_report_abs(dev, ABS_Y, !(s & data[4]) - !(s & data[5]));
 
-		if (s & gc->pads[GC_SNES])
 			for (j = 0; j < 8; j++)
-				input_report_key(dev, gc_snes_btn[j], s & data[gc_snes_bytes[j]]);
+				input_report_key(dev, gc_snes_btn[j],
+						 s & data[gc_snes_bytes[j]]);
+			input_sync(dev);
+			break;
 
-		if (s & gc->pads[GC_SNESMOUSE]) {
+		case GC_SNESMOUSE:
 			/*
-			 * The 4 unused bits from SNES controllers appear to be ID bits
-			 * so use them to make sure iwe are dealing with a mouse.
+			 * The 4 unused bits from SNES controllers appear
+			 * to be ID bits so use them to make sure we are
+			 * dealing with a mouse.
 			 * gamepad is connected. This is important since
 			 * my SNES gamepad sends 1's for bits 16-31, which
 			 * cause the mouse pointer to quickly move to the
@@ -310,9 +450,14 @@ static void gc_nes_process_packet(struct gc *gc)
 						y_rel = -y_rel;
 					input_report_rel(dev, REL_Y, y_rel);
 				}
+
+				input_sync(dev);
 			}
+			break;
+
+		default:
+			break;
 		}
-		input_sync(dev);
 	}
 }
 
@@ -340,29 +485,35 @@ static void gc_multi_read_packet(struct gc *gc, int length, unsigned char *data)
 static void gc_multi_process_packet(struct gc *gc)
 {
 	unsigned char data[GC_MULTI2_LENGTH];
+	int data_len = gc->pad_count[GC_MULTI2] ? GC_MULTI2_LENGTH : GC_MULTI_LENGTH;
+	struct gc_pad *pad;
 	struct input_dev *dev;
 	int i, s;
 
-	gc_multi_read_packet(gc, gc->pads[GC_MULTI2] ? GC_MULTI2_LENGTH : GC_MULTI_LENGTH, data);
+	gc_multi_read_packet(gc, data_len, data);
 
 	for (i = 0; i < GC_MAX_DEVICES; i++) {
-
-		dev = gc->dev[i];
-		if (!dev)
-			continue;
-
+		pad = &gc->pads[i];
+		dev = pad->dev;
 		s = gc_status_bit[i];
 
-		if (s & (gc->pads[GC_MULTI] | gc->pads[GC_MULTI2])) {
-			input_report_abs(dev, ABS_X,  !(s & data[2]) - !(s & data[3]));
-			input_report_abs(dev, ABS_Y,  !(s & data[0]) - !(s & data[1]));
-			input_report_key(dev, BTN_TRIGGER, s & data[4]);
-		}
-
-		if (s & gc->pads[GC_MULTI2])
+		switch (pad->type) {
+		case GC_MULTI2:
 			input_report_key(dev, BTN_THUMB, s & data[5]);
+			/* fall through */
 
-		input_sync(dev);
+		case GC_MULTI:
+			input_report_abs(dev, ABS_X,
+					 !(s & data[2]) - !(s & data[3]));
+			input_report_abs(dev, ABS_Y,
+					 !(s & data[0]) - !(s & data[1]));
+			input_report_key(dev, BTN_TRIGGER, s & data[4]);
+			input_sync(dev);
+			break;
+
+		default:
+			break;
+		}
 	}
 }
 
@@ -398,30 +549,41 @@ static int gc_psx_delay = GC_PSX_DELAY;
 module_param_named(psx_delay, gc_psx_delay, uint, 0);
 MODULE_PARM_DESC(psx_delay, "Delay when accessing Sony PSX controller (usecs)");
 
-static short gc_psx_abs[] = { ABS_X, ABS_Y, ABS_RX, ABS_RY, ABS_HAT0X, ABS_HAT0Y };
-static short gc_psx_btn[] = { BTN_TL, BTN_TR, BTN_TL2, BTN_TR2, BTN_A, BTN_B, BTN_X, BTN_Y,
-				BTN_START, BTN_SELECT, BTN_THUMBL, BTN_THUMBR };
-static short gc_psx_ddr_btn[] = { BTN_0, BTN_1, BTN_2, BTN_3 };
+static const short gc_psx_abs[] = {
+	ABS_X, ABS_Y, ABS_RX, ABS_RY, ABS_HAT0X, ABS_HAT0Y
+};
+static const short gc_psx_btn[] = {
+	BTN_TL, BTN_TR, BTN_TL2, BTN_TR2, BTN_A, BTN_B, BTN_X, BTN_Y,
+	BTN_START, BTN_SELECT, BTN_THUMBL, BTN_THUMBR
+};
+static const short gc_psx_ddr_btn[] = { BTN_0, BTN_1, BTN_2, BTN_3 };
 
 /*
  * gc_psx_command() writes 8bit command and reads 8bit data from
  * the psx pad.
  */
 
-static void gc_psx_command(struct gc *gc, int b, unsigned char data[GC_MAX_DEVICES])
+static void gc_psx_command(struct gc *gc, int b, unsigned char *data)
 {
+	struct parport *port = gc->pd->port;
 	int i, j, cmd, read;
 
-	for (i = 0; i < GC_MAX_DEVICES; i++)
-		data[i] = 0;
+	memset(data, 0, GC_MAX_DEVICES);
 
 	for (i = 0; i < GC_PSX_LENGTH; i++, b >>= 1) {
 		cmd = (b & 1) ? GC_PSX_COMMAND : 0;
-		parport_write_data(gc->pd->port, cmd | GC_PSX_POWER);
+		parport_write_data(port, cmd | GC_PSX_POWER);
 		udelay(gc_psx_delay);
-		read = parport_read_status(gc->pd->port) ^ 0x80;
-		for (j = 0; j < GC_MAX_DEVICES; j++)
-			data[j] |= (read & gc_status_bit[j] & (gc->pads[GC_PSX] | gc->pads[GC_DDR])) ? (1 << i) : 0;
+
+		read = parport_read_status(port) ^ 0x80;
+
+		for (j = 0; j < GC_MAX_DEVICES; j++) {
+			struct gc_pad *pad = &gc->pads[i];
+
+			if (pad->type == GC_PSX || pad->type == GC_DDR)
+				data[j] |= (read & gc_status_bit[j]) ? (1 << i) : 0;
+		}
+
 		parport_write_data(gc->pd->port, cmd | GC_PSX_CLOCK | GC_PSX_POWER);
 		udelay(gc_psx_delay);
 	}
@@ -432,31 +594,40 @@ static void gc_psx_command(struct gc *gc, int b, unsigned char data[GC_MAX_DEVIC
  * device identifier code.
  */
 
-static void gc_psx_read_packet(struct gc *gc, unsigned char data[GC_MAX_DEVICES][GC_PSX_BYTES],
+static void gc_psx_read_packet(struct gc *gc,
+			       unsigned char data[GC_MAX_DEVICES][GC_PSX_BYTES],
 			       unsigned char id[GC_MAX_DEVICES])
 {
 	int i, j, max_len = 0;
 	unsigned long flags;
 	unsigned char data2[GC_MAX_DEVICES];
 
-	parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_SELECT | GC_PSX_POWER);	/* Select pad */
+	/* Select pad */
+	parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_SELECT | GC_PSX_POWER);
 	udelay(gc_psx_delay);
-	parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_POWER);			/* Deselect, begin command */
+	/* Deselect, begin command */
+	parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_POWER);
 	udelay(gc_psx_delay);
 
 	local_irq_save(flags);
 
-	gc_psx_command(gc, 0x01, data2);						/* Access pad */
-	gc_psx_command(gc, 0x42, id);							/* Get device ids */
-	gc_psx_command(gc, 0, data2);							/* Dump status */
+	gc_psx_command(gc, 0x01, data2);	/* Access pad */
+	gc_psx_command(gc, 0x42, id);		/* Get device ids */
+	gc_psx_command(gc, 0, data2);		/* Dump status */
+
+	/* Find the longest pad */
+	for (i = 0; i < GC_MAX_DEVICES; i++) {
+		struct gc_pad *pad = &gc->pads[i];
 
-	for (i =0; i < GC_MAX_DEVICES; i++)								/* Find the longest pad */
-		if((gc_status_bit[i] & (gc->pads[GC_PSX] | gc->pads[GC_DDR]))
-			&& (GC_PSX_LEN(id[i]) > max_len)
-			&& (GC_PSX_LEN(id[i]) <= GC_PSX_BYTES))
+		if ((pad->type == GC_PSX || pad->type == GC_DDR) &&
+		    GC_PSX_LEN(id[i]) > max_len &&
+		    GC_PSX_LEN(id[i]) <= GC_PSX_BYTES) {
 			max_len = GC_PSX_LEN(id[i]);
+		}
+	}
 
-	for (i = 0; i < max_len; i++) {						/* Read in all the data */
+	/* Read in all the data */
+	for (i = 0; i < max_len; i++) {
 		gc_psx_command(gc, 0, data2);
 		for (j = 0; j < GC_MAX_DEVICES; j++)
 			data[j][i] = data2[j];
@@ -466,86 +637,104 @@ static void gc_psx_read_packet(struct gc *gc, unsigned char data[GC_MAX_DEVICES]
 
 	parport_write_data(gc->pd->port, GC_PSX_CLOCK | GC_PSX_SELECT | GC_PSX_POWER);
 
-	for(i = 0; i < GC_MAX_DEVICES; i++)								/* Set id's to the real value */
+	/* Set id's to the real value */
+	for (i = 0; i < GC_MAX_DEVICES; i++)
 		id[i] = GC_PSX_ID(id[i]);
 }
 
-static void gc_psx_process_packet(struct gc *gc)
+static void gc_psx_report_one(struct gc_pad *pad, unsigned char psx_type,
+			      unsigned char *data)
 {
-	unsigned char data[GC_MAX_DEVICES][GC_PSX_BYTES];
-	unsigned char id[GC_MAX_DEVICES];
-	struct input_dev *dev;
-	int i, j;
+	struct input_dev *dev = pad->dev;
+	int i;
 
-	gc_psx_read_packet(gc, data, id);
+	switch (psx_type) {
 
-	for (i = 0; i < GC_MAX_DEVICES; i++) {
+	case GC_PSX_RUMBLE:
 
-		dev = gc->dev[i];
-		if (!dev)
-			continue;
+		input_report_key(dev, BTN_THUMBL, ~data[0] & 0x04);
+		input_report_key(dev, BTN_THUMBR, ~data[0] & 0x02);
 
-		switch (id[i]) {
+	case GC_PSX_NEGCON:
+	case GC_PSX_ANALOG:
 
-			case GC_PSX_RUMBLE:
+		if (pad->type == GC_DDR) {
+			for (i = 0; i < 4; i++)
+				input_report_key(dev, gc_psx_ddr_btn[i],
+						 ~data[0] & (0x10 << i));
+		} else {
+			for (i = 0; i < 4; i++)
+				input_report_abs(dev, gc_psx_abs[i + 2],
+						 data[i + 2]);
 
-				input_report_key(dev, BTN_THUMBL, ~data[i][0] & 0x04);
-				input_report_key(dev, BTN_THUMBR, ~data[i][0] & 0x02);
+			input_report_abs(dev, ABS_X,
+				!!(data[0] & 0x80) * 128 + !(data[0] & 0x20) * 127);
+			input_report_abs(dev, ABS_Y,
+				!!(data[0] & 0x10) * 128 + !(data[0] & 0x40) * 127);
+		}
 
-			case GC_PSX_NEGCON:
-			case GC_PSX_ANALOG:
+		for (i = 0; i < 8; i++)
+			input_report_key(dev, gc_psx_btn[i], ~data[1] & (1 << i));
 
-				if (gc->pads[GC_DDR] & gc_status_bit[i]) {
-					for(j = 0; j < 4; j++)
-						input_report_key(dev, gc_psx_ddr_btn[j], ~data[i][0] & (0x10 << j));
-				} else {
-					for (j = 0; j < 4; j++)
-						input_report_abs(dev, gc_psx_abs[j + 2], data[i][j + 2]);
+		input_report_key(dev, BTN_START,  ~data[0] & 0x08);
+		input_report_key(dev, BTN_SELECT, ~data[0] & 0x01);
 
-					input_report_abs(dev, ABS_X, 128 + !(data[i][0] & 0x20) * 127 - !(data[i][0] & 0x80) * 128);
-					input_report_abs(dev, ABS_Y, 128 + !(data[i][0] & 0x40) * 127 - !(data[i][0] & 0x10) * 128);
-				}
+		input_sync(dev);
 
-				for (j = 0; j < 8; j++)
-					input_report_key(dev, gc_psx_btn[j], ~data[i][1] & (1 << j));
+		break;
 
-				input_report_key(dev, BTN_START,  ~data[i][0] & 0x08);
-				input_report_key(dev, BTN_SELECT, ~data[i][0] & 0x01);
+	case GC_PSX_NORMAL:
 
-				input_sync(dev);
+		if (pad->type == GC_DDR) {
+			for (i = 0; i < 4; i++)
+				input_report_key(dev, gc_psx_ddr_btn[i],
+						 ~data[0] & (0x10 << i));
+		} else {
+			input_report_abs(dev, ABS_X,
+				!!(data[0] & 0x80) * 128 + !(data[0] & 0x20) * 127);
+			input_report_abs(dev, ABS_Y,
+				!!(data[0] & 0x10) * 128 + !(data[0] & 0x40) * 127);
 
-				break;
-
-			case GC_PSX_NORMAL:
-				if (gc->pads[GC_DDR] & gc_status_bit[i]) {
-					for(j = 0; j < 4; j++)
-						input_report_key(dev, gc_psx_ddr_btn[j], ~data[i][0] & (0x10 << j));
-				} else {
-					input_report_abs(dev, ABS_X, 128 + !(data[i][0] & 0x20) * 127 - !(data[i][0] & 0x80) * 128);
-					input_report_abs(dev, ABS_Y, 128 + !(data[i][0] & 0x40) * 127 - !(data[i][0] & 0x10) * 128);
-
-					/* for some reason if the extra axes are left unset they drift */
-					/* for (j = 0; j < 4; j++)
-						input_report_abs(dev, gc_psx_abs[j + 2], 128);
-					 * This needs to be debugged properly,
-					 * maybe fuzz processing needs to be done in input_sync()
-					 *				 --vojtech
-					 */
-				}
+			/*
+			 * For some reason if the extra axes are left unset
+			 * they drift.
+			 * for (i = 0; i < 4; i++)
+				input_report_abs(dev, gc_psx_abs[i + 2], 128);
+			 * This needs to be debugged properly,
+			 * maybe fuzz processing needs to be done
+			 * in input_sync()
+			 *				 --vojtech
+			 */
+		}
 
-				for (j = 0; j < 8; j++)
-					input_report_key(dev, gc_psx_btn[j], ~data[i][1] & (1 << j));
+		for (i = 0; i < 8; i++)
+			input_report_key(dev, gc_psx_btn[i], ~data[1] & (1 << i));
 
-				input_report_key(dev, BTN_START,  ~data[i][0] & 0x08);
-				input_report_key(dev, BTN_SELECT, ~data[i][0] & 0x01);
+		input_report_key(dev, BTN_START,  ~data[0] & 0x08);
+		input_report_key(dev, BTN_SELECT, ~data[0] & 0x01);
 
-				input_sync(dev);
+		input_sync(dev);
 
-				break;
+		break;
 
-			case 0: /* not a pad, ignore */
-				break;
-		}
+	default: /* not a pad, ignore */
+		break;
+	}
+}
+
+static void gc_psx_process_packet(struct gc *gc)
+{
+	unsigned char data[GC_MAX_DEVICES][GC_PSX_BYTES];
+	unsigned char id[GC_MAX_DEVICES];
+	struct gc_pad *pad;
+	int i;
+
+	gc_psx_read_packet(gc, data, id);
+
+	for (i = 0; i < GC_MAX_DEVICES; i++) {
+		pad = &gc->pads[i];
+		if (pad->type == GC_PSX || pad->type == GC_DDR)
+			gc_psx_report_one(pad, id[i], data[i]);
 	}
 }
 
@@ -561,28 +750,31 @@ static void gc_timer(unsigned long private)
  * N64 pads - must be read first, any read confuses them for 200 us
  */
 
-	if (gc->pads[GC_N64])
+	if (gc->pad_count[GC_N64])
 		gc_n64_process_packet(gc);
 
 /*
  * NES and SNES pads or mouse
  */
 
-	if (gc->pads[GC_NES] || gc->pads[GC_SNES] || gc->pads[GC_SNESMOUSE])
+	if (gc->pad_count[GC_NES] ||
+	    gc->pad_count[GC_SNES] ||
+	    gc->pad_count[GC_SNESMOUSE]) {
 		gc_nes_process_packet(gc);
+	}
 
 /*
  * Multi and Multi2 joysticks
  */
 
-	if (gc->pads[GC_MULTI] || gc->pads[GC_MULTI2])
+	if (gc->pad_count[GC_MULTI] || gc->pad_count[GC_MULTI2])
 		gc_multi_process_packet(gc);
 
 /*
  * PSX controllers
  */
 
-	if (gc->pads[GC_PSX] || gc->pads[GC_DDR])
+	if (gc->pad_count[GC_PSX] || gc->pad_count[GC_DDR])
 		gc_psx_process_packet(gc);
 
 	mod_timer(&gc->timer, jiffies + GC_REFRESH_TIME);
@@ -622,25 +814,29 @@ static void gc_close(struct input_dev *dev)
 
 static int __init gc_setup_pad(struct gc *gc, int idx, int pad_type)
 {
+	struct gc_pad *pad = &gc->pads[idx];
 	struct input_dev *input_dev;
 	int i;
-
-	if (!pad_type)
-		return 0;
+	int err;
 
 	if (pad_type < 1 || pad_type > GC_MAX) {
-		printk(KERN_WARNING "gamecon.c: Pad type %d unknown\n", pad_type);
+		pr_err("Pad type %d unknown\n", pad_type);
 		return -EINVAL;
 	}
 
-	gc->dev[idx] = input_dev = input_allocate_device();
+	pad->dev = input_dev = input_allocate_device();
 	if (!input_dev) {
-		printk(KERN_ERR "gamecon.c: Not enough memory for input device\n");
+		pr_err("Not enough memory for input device\n");
 		return -ENOMEM;
 	}
 
+	pad->type = pad_type;
+
+	snprintf(pad->phys, sizeof(pad->phys),
+		 "%s/input%d", gc->pd->port->name, idx);
+
 	input_dev->name = gc_names[pad_type];
-	input_dev->phys = gc->phys[idx];
+	input_dev->phys = pad->phys;
 	input_dev->id.bustype = BUS_PARPORT;
 	input_dev->id.vendor = 0x0001;
 	input_dev->id.product = pad_type;
@@ -659,61 +855,76 @@ static int __init gc_setup_pad(struct gc *gc, int idx, int pad_type)
 	} else
 		input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
 
-	gc->pads[0] |= gc_status_bit[idx];
-	gc->pads[pad_type] |= gc_status_bit[idx];
+	gc->pad_count[pad_type]++;
 
 	switch (pad_type) {
 
-		case GC_N64:
-			for (i = 0; i < 10; i++)
-				set_bit(gc_n64_btn[i], input_dev->keybit);
-
-			for (i = 0; i < 2; i++) {
-				input_set_abs_params(input_dev, ABS_X + i, -127, 126, 0, 2);
-				input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0);
-			}
-
-			break;
-
-		case GC_SNESMOUSE:
-			set_bit(BTN_LEFT, input_dev->keybit);
-			set_bit(BTN_RIGHT, input_dev->keybit);
-			set_bit(REL_X, input_dev->relbit);
-			set_bit(REL_Y, input_dev->relbit);
-			break;
-
-		case GC_SNES:
-			for (i = 4; i < 8; i++)
-				set_bit(gc_snes_btn[i], input_dev->keybit);
-		case GC_NES:
-			for (i = 0; i < 4; i++)
-				set_bit(gc_snes_btn[i], input_dev->keybit);
-			break;
-
-		case GC_MULTI2:
-			set_bit(BTN_THUMB, input_dev->keybit);
-		case GC_MULTI:
-			set_bit(BTN_TRIGGER, input_dev->keybit);
-			break;
-
-		case GC_PSX:
-			for (i = 0; i < 6; i++)
-				input_set_abs_params(input_dev, gc_psx_abs[i], 4, 252, 0, 2);
-			for (i = 0; i < 12; i++)
-				set_bit(gc_psx_btn[i], input_dev->keybit);
+	case GC_N64:
+		for (i = 0; i < 10; i++)
+			__set_bit(gc_n64_btn[i], input_dev->keybit);
 
-			break;
+		for (i = 0; i < 2; i++) {
+			input_set_abs_params(input_dev, ABS_X + i, -127, 126, 0, 2);
+			input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0);
+		}
 
-		case GC_DDR:
-			for (i = 0; i < 4; i++)
-				set_bit(gc_psx_ddr_btn[i], input_dev->keybit);
-			for (i = 0; i < 12; i++)
-				set_bit(gc_psx_btn[i], input_dev->keybit);
+		err = gc_n64_init_ff(input_dev, idx);
+		if (err) {
+			pr_warning("Failed to initiate rumble for N64 device %d\n", idx);
+			goto err_free_dev;
+		}
 
-			break;
+		break;
+
+	case GC_SNESMOUSE:
+		__set_bit(BTN_LEFT, input_dev->keybit);
+		__set_bit(BTN_RIGHT, input_dev->keybit);
+		__set_bit(REL_X, input_dev->relbit);
+		__set_bit(REL_Y, input_dev->relbit);
+		break;
+
+	case GC_SNES:
+		for (i = 4; i < 8; i++)
+			__set_bit(gc_snes_btn[i], input_dev->keybit);
+	case GC_NES:
+		for (i = 0; i < 4; i++)
+			__set_bit(gc_snes_btn[i], input_dev->keybit);
+		break;
+
+	case GC_MULTI2:
+		__set_bit(BTN_THUMB, input_dev->keybit);
+	case GC_MULTI:
+		__set_bit(BTN_TRIGGER, input_dev->keybit);
+		break;
+
+	case GC_PSX:
+		for (i = 0; i < 6; i++)
+			input_set_abs_params(input_dev,
+					     gc_psx_abs[i], 4, 252, 0, 2);
+		for (i = 0; i < 12; i++)
+			__set_bit(gc_psx_btn[i], input_dev->keybit);
+
+		break;
+
+	case GC_DDR:
+		for (i = 0; i < 4; i++)
+			__set_bit(gc_psx_ddr_btn[i], input_dev->keybit);
+		for (i = 0; i < 12; i++)
+			__set_bit(gc_psx_btn[i], input_dev->keybit);
+
+		break;
 	}
 
+	err = input_register_device(pad->dev);
+	if (err)
+		goto err_free_dev;
+
 	return 0;
+
+err_free_dev:
+	input_free_device(pad->dev);
+	pad->dev = NULL;
+	return err;
 }
 
 static struct gc __init *gc_probe(int parport, int *pads, int n_pads)
@@ -722,52 +933,47 @@ static struct gc __init *gc_probe(int parport, int *pads, int n_pads)
 	struct parport *pp;
 	struct pardevice *pd;
 	int i;
+	int count = 0;
 	int err;
 
 	pp = parport_find_number(parport);
 	if (!pp) {
-		printk(KERN_ERR "gamecon.c: no such parport\n");
+		pr_err("no such parport %d\n", parport);
 		err = -EINVAL;
 		goto err_out;
 	}
 
 	pd = parport_register_device(pp, "gamecon", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
 	if (!pd) {
-		printk(KERN_ERR "gamecon.c: parport busy already - lp.o loaded?\n");
+		pr_err("parport busy already - lp.o loaded?\n");
 		err = -EBUSY;
 		goto err_put_pp;
 	}
 
 	gc = kzalloc(sizeof(struct gc), GFP_KERNEL);
 	if (!gc) {
-		printk(KERN_ERR "gamecon.c: Not enough memory\n");
+		pr_err("Not enough memory\n");
 		err = -ENOMEM;
 		goto err_unreg_pardev;
 	}
 
 	mutex_init(&gc->mutex);
 	gc->pd = pd;
-	init_timer(&gc->timer);
-	gc->timer.data = (long) gc;
-	gc->timer.function = gc_timer;
+	setup_timer(&gc->timer, gc_timer, (long) gc);
 
 	for (i = 0; i < n_pads && i < GC_MAX_DEVICES; i++) {
 		if (!pads[i])
 			continue;
 
-		snprintf(gc->phys[i], sizeof(gc->phys[i]),
-			 "%s/input%d", gc->pd->port->name, i);
 		err = gc_setup_pad(gc, i, pads[i]);
 		if (err)
 			goto err_unreg_devs;
 
-		err = input_register_device(gc->dev[i]);
-		if (err)
-			goto err_free_dev;
+		count++;
 	}
 
-	if (!gc->pads[0]) {
-		printk(KERN_ERR "gamecon.c: No valid devices specified\n");
+	if (count == 0) {
+		pr_err("No valid devices specified\n");
 		err = -EINVAL;
 		goto err_free_gc;
 	}
@@ -775,12 +981,10 @@ static struct gc __init *gc_probe(int parport, int *pads, int n_pads)
 	parport_put_port(pp);
 	return gc;
 
- err_free_dev:
-	input_free_device(gc->dev[i]);
  err_unreg_devs:
 	while (--i >= 0)
-		if (gc->dev[i])
-			input_unregister_device(gc->dev[i]);
+		if (gc->pads[i].dev)
+			input_unregister_device(gc->pads[i].dev);
  err_free_gc:
 	kfree(gc);
  err_unreg_pardev:
@@ -796,8 +1000,8 @@ static void gc_remove(struct gc *gc)
 	int i;
 
 	for (i = 0; i < GC_MAX_DEVICES; i++)
-		if (gc->dev[i])
-			input_unregister_device(gc->dev[i]);
+		if (gc->pads[i].dev)
+			input_unregister_device(gc->pads[i].dev);
 	parport_unregister_device(gc->pd);
 	kfree(gc);
 }
@@ -813,7 +1017,7 @@ static int __init gc_init(void)
 			continue;
 
 		if (gc_cfg[i].nargs < 2) {
-			printk(KERN_ERR "gamecon.c: at least one device must be specified\n");
+			pr_err("at least one device must be specified\n");
 			err = -EINVAL;
 			break;
 		}
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 8a28fb7846dc..9b3353b404da 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -86,9 +86,8 @@
 
 /* xbox d-pads should map to buttons, as is required for DDR pads
    but we map them to axes when possible to simplify things */
-#define MAP_DPAD_TO_BUTTONS    0
-#define MAP_DPAD_TO_AXES       1
-#define MAP_DPAD_UNKNOWN       2
+#define MAP_DPAD_TO_BUTTONS		(1 << 0)
+#define MAP_TRIGGERS_TO_BUTTONS		(1 << 1)
 
 #define XTYPE_XBOX        0
 #define XTYPE_XBOX360     1
@@ -99,57 +98,61 @@ static int dpad_to_buttons;
 module_param(dpad_to_buttons, bool, S_IRUGO);
 MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads");
 
+static int triggers_to_buttons;
+module_param(triggers_to_buttons, bool, S_IRUGO);
+MODULE_PARM_DESC(triggers_to_buttons, "Map triggers to buttons rather than axes for unknown pads");
+
 static const struct xpad_device {
 	u16 idVendor;
 	u16 idProduct;
 	char *name;
-	u8 dpad_mapping;
+	u8 mapping;
 	u8 xtype;
 } xpad_device[] = {
-	{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX },
+	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
+	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX },
+	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
 	{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
 	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
-	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x046d, 0xc242, "Logitech Chillstream Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
-	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
+	{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
+	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
+	{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", 0, XTYPE_XBOX },
+	{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", 0, XTYPE_XBOX },
+	{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", 0, XTYPE_XBOX },
+	{ 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX },
+	{ 0x0738, 0x4522, "Mad Catz LumiCON", 0, XTYPE_XBOX },
+	{ 0x0738, 0x4526, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
+	{ 0x0738, 0x4536, "Mad Catz MicroCON", 0, XTYPE_XBOX },
 	{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
-	{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
-	{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
+	{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX },
+	{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
-	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0e6f, 0x0006, "Pelican 'TSZ' Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
-	{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
+	{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
+	{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
+	{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX },
+	{ 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX },
+	{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX },
+	{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX },
+	{ 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX },
+	{ 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX },
+	{ 0x0e6f, 0x0006, "Pelican 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX },
+	{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
+	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
+	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
 	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
-	{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
+	{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 },
 	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
-	{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
-	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
+	{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
-	{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
-	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN, XTYPE_UNKNOWN }
+	{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
+	{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
 };
 
 /* buttons shared with xbox and xbox360 */
@@ -165,13 +168,20 @@ static const signed short xpad_btn[] = {
 	-1			/* terminating entry */
 };
 
-/* only used if MAP_DPAD_TO_BUTTONS */
+/* used when dpad is mapped to nuttons */
 static const signed short xpad_btn_pad[] = {
 	BTN_LEFT, BTN_RIGHT,		/* d-pad left, right */
 	BTN_0, BTN_1,			/* d-pad up, down (XXX names??) */
 	-1				/* terminating entry */
 };
 
+/* used when triggers are mapped to buttons */
+static const signed short xpad_btn_triggers[] = {
+	BTN_TL2, BTN_TR2,		/* triggers left/right */
+	-1
+};
+
+
 static const signed short xpad360_btn[] = {  /* buttons for x360 controller */
 	BTN_TL, BTN_TR,		/* Button LB/RB */
 	BTN_MODE,		/* The big X button */
@@ -181,16 +191,21 @@ static const signed short xpad360_btn[] = {  /* buttons for x360 controller */
 static const signed short xpad_abs[] = {
 	ABS_X, ABS_Y,		/* left stick */
 	ABS_RX, ABS_RY,		/* right stick */
-	ABS_Z, ABS_RZ,		/* triggers left/right */
 	-1			/* terminating entry */
 };
 
-/* only used if MAP_DPAD_TO_AXES */
+/* used when dpad is mapped to axes */
 static const signed short xpad_abs_pad[] = {
 	ABS_HAT0X, ABS_HAT0Y,	/* d-pad axes */
 	-1			/* terminating entry */
 };
 
+/* used when triggers are mapped to axes */
+static const signed short xpad_abs_triggers[] = {
+	ABS_Z, ABS_RZ,		/* triggers left/right */
+	-1
+};
+
 /* Xbox 360 has a vendor-specific class, so we cannot match it with only
  * USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we
  * match against vendor id as well. Wired Xbox 360 devices have protocol 1,
@@ -246,7 +261,7 @@ struct usb_xpad {
 
 	char phys[64];			/* physical device path */
 
-	int dpad_mapping;		/* map d-pad to buttons or to axes */
+	int mapping;			/* map d-pad to buttons or to axes */
 	int xtype;			/* type of xbox device */
 };
 
@@ -277,20 +292,25 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
 			 ~(__s16) le16_to_cpup((__le16 *)(data + 18)));
 
 	/* triggers left/right */
-	input_report_abs(dev, ABS_Z, data[10]);
-	input_report_abs(dev, ABS_RZ, data[11]);
+	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
+		input_report_key(dev, BTN_TL2, data[10]);
+		input_report_key(dev, BTN_TR2, data[11]);
+	} else {
+		input_report_abs(dev, ABS_Z, data[10]);
+		input_report_abs(dev, ABS_RZ, data[11]);
+	}
 
 	/* digital pad */
-	if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) {
-		input_report_abs(dev, ABS_HAT0X,
-				 !!(data[2] & 0x08) - !!(data[2] & 0x04));
-		input_report_abs(dev, ABS_HAT0Y,
-				 !!(data[2] & 0x02) - !!(data[2] & 0x01));
-	} else /* xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS */ {
+	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
 		input_report_key(dev, BTN_LEFT,  data[2] & 0x04);
 		input_report_key(dev, BTN_RIGHT, data[2] & 0x08);
 		input_report_key(dev, BTN_0,     data[2] & 0x01); /* up */
 		input_report_key(dev, BTN_1,     data[2] & 0x02); /* down */
+	} else {
+		input_report_abs(dev, ABS_HAT0X,
+				 !!(data[2] & 0x08) - !!(data[2] & 0x04));
+		input_report_abs(dev, ABS_HAT0Y,
+				 !!(data[2] & 0x02) - !!(data[2] & 0x01));
 	}
 
 	/* start/back buttons and stick press left/right */
@@ -328,17 +348,17 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
 	struct input_dev *dev = xpad->dev;
 
 	/* digital pad */
-	if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) {
-		input_report_abs(dev, ABS_HAT0X,
-				 !!(data[2] & 0x08) - !!(data[2] & 0x04));
-		input_report_abs(dev, ABS_HAT0Y,
-				 !!(data[2] & 0x02) - !!(data[2] & 0x01));
-	} else if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS) {
+	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
 		/* dpad as buttons (right, left, down, up) */
 		input_report_key(dev, BTN_LEFT, data[2] & 0x04);
 		input_report_key(dev, BTN_RIGHT, data[2] & 0x08);
 		input_report_key(dev, BTN_0, data[2] & 0x01);	/* up */
 		input_report_key(dev, BTN_1, data[2] & 0x02);	/* down */
+	} else {
+		input_report_abs(dev, ABS_HAT0X,
+				 !!(data[2] & 0x08) - !!(data[2] & 0x04));
+		input_report_abs(dev, ABS_HAT0Y,
+				 !!(data[2] & 0x02) - !!(data[2] & 0x01));
 	}
 
 	/* start/back buttons */
@@ -371,8 +391,13 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
 			 ~(__s16) le16_to_cpup((__le16 *)(data + 12)));
 
 	/* triggers left/right */
-	input_report_abs(dev, ABS_Z, data[4]);
-	input_report_abs(dev, ABS_RZ, data[5]);
+	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
+		input_report_key(dev, BTN_TL2, data[4]);
+		input_report_key(dev, BTN_TR2, data[5]);
+	} else {
+		input_report_abs(dev, ABS_Z, data[4]);
+		input_report_abs(dev, ABS_RZ, data[5]);
+	}
 
 	input_sync(dev);
 }
@@ -505,7 +530,7 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 	struct usb_endpoint_descriptor *ep_irq_out;
 	int error = -ENOMEM;
 
-	if (xpad->xtype != XTYPE_XBOX360)
+	if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX)
 		return 0;
 
 	xpad->odata = usb_buffer_alloc(xpad->udev, XPAD_PKT_LEN,
@@ -535,13 +560,13 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 
 static void xpad_stop_output(struct usb_xpad *xpad)
 {
-	if (xpad->xtype == XTYPE_XBOX360)
+	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX)
 		usb_kill_urb(xpad->irq_out);
 }
 
 static void xpad_deinit_output(struct usb_xpad *xpad)
 {
-	if (xpad->xtype == XTYPE_XBOX360) {
+	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX) {
 		usb_free_urb(xpad->irq_out);
 		usb_buffer_free(xpad->udev, XPAD_PKT_LEN,
 				xpad->odata, xpad->odata_dma);
@@ -554,24 +579,45 @@ static void xpad_stop_output(struct usb_xpad *xpad) {}
 #endif
 
 #ifdef CONFIG_JOYSTICK_XPAD_FF
-static int xpad_play_effect(struct input_dev *dev, void *data,
-			    struct ff_effect *effect)
+static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect)
 {
 	struct usb_xpad *xpad = input_get_drvdata(dev);
 
 	if (effect->type == FF_RUMBLE) {
 		__u16 strong = effect->u.rumble.strong_magnitude;
 		__u16 weak = effect->u.rumble.weak_magnitude;
-		xpad->odata[0] = 0x00;
-		xpad->odata[1] = 0x08;
-		xpad->odata[2] = 0x00;
-		xpad->odata[3] = strong / 256;
-		xpad->odata[4] = weak / 256;
-		xpad->odata[5] = 0x00;
-		xpad->odata[6] = 0x00;
-		xpad->odata[7] = 0x00;
-		xpad->irq_out->transfer_buffer_length = 8;
-		usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
+
+		switch (xpad->xtype) {
+
+		case XTYPE_XBOX:
+			xpad->odata[0] = 0x00;
+			xpad->odata[1] = 0x06;
+			xpad->odata[2] = 0x00;
+			xpad->odata[3] = strong / 256;	/* left actuator */
+			xpad->odata[4] = 0x00;
+			xpad->odata[5] = weak / 256;	/* right actuator */
+			xpad->irq_out->transfer_buffer_length = 6;
+
+			return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
+
+		case XTYPE_XBOX360:
+			xpad->odata[0] = 0x00;
+			xpad->odata[1] = 0x08;
+			xpad->odata[2] = 0x00;
+			xpad->odata[3] = strong / 256;  /* left actuator? */
+			xpad->odata[4] = weak / 256;	/* right actuator? */
+			xpad->odata[5] = 0x00;
+			xpad->odata[6] = 0x00;
+			xpad->odata[7] = 0x00;
+			xpad->irq_out->transfer_buffer_length = 8;
+
+			return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
+
+		default:
+			dbg("%s - rumble command sent to unsupported xpad type: %d",
+				__func__, xpad->xtype);
+			return -1;
+		}
 	}
 
 	return 0;
@@ -579,7 +625,7 @@ static int xpad_play_effect(struct input_dev *dev, void *data,
 
 static int xpad_init_ff(struct usb_xpad *xpad)
 {
-	if (xpad->xtype != XTYPE_XBOX360)
+	if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX)
 		return 0;
 
 	input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);
@@ -712,11 +758,11 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
 		input_set_abs_params(input_dev, abs, -32768, 32767, 16, 128);
 		break;
 	case ABS_Z:
-	case ABS_RZ:	/* the triggers */
+	case ABS_RZ:	/* the triggers (if mapped to axes) */
 		input_set_abs_params(input_dev, abs, 0, 255, 0, 0);
 		break;
 	case ABS_HAT0X:
-	case ABS_HAT0Y:	/* the d-pad (only if MAP_DPAD_TO_AXES) */
+	case ABS_HAT0Y:	/* the d-pad (only if dpad is mapped to axes */
 		input_set_abs_params(input_dev, abs, -1, 1, 0, 0);
 		break;
 	}
@@ -752,10 +798,9 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 		goto fail2;
 
 	xpad->udev = udev;
-	xpad->dpad_mapping = xpad_device[i].dpad_mapping;
+	xpad->mapping = xpad_device[i].mapping;
 	xpad->xtype = xpad_device[i].xtype;
-	if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN)
-		xpad->dpad_mapping = !dpad_to_buttons;
+
 	if (xpad->xtype == XTYPE_UNKNOWN) {
 		if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
 			if (intf->cur_altsetting->desc.bInterfaceProtocol == 129)
@@ -764,7 +809,13 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 				xpad->xtype = XTYPE_XBOX360;
 		} else
 			xpad->xtype = XTYPE_XBOX;
+
+		if (dpad_to_buttons)
+			xpad->mapping |= MAP_DPAD_TO_BUTTONS;
+		if (triggers_to_buttons)
+			xpad->mapping |= MAP_TRIGGERS_TO_BUTTONS;
 	}
+
 	xpad->dev = input_dev;
 	usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
 	strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
@@ -781,25 +832,37 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 
-	/* set up buttons */
+	/* set up standard buttons and axes */
 	for (i = 0; xpad_common_btn[i] >= 0; i++)
-		set_bit(xpad_common_btn[i], input_dev->keybit);
-	if ((xpad->xtype == XTYPE_XBOX360) || (xpad->xtype == XTYPE_XBOX360W))
-		for (i = 0; xpad360_btn[i] >= 0; i++)
-			set_bit(xpad360_btn[i], input_dev->keybit);
-	else
-		for (i = 0; xpad_btn[i] >= 0; i++)
-			set_bit(xpad_btn[i], input_dev->keybit);
-	if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS)
-		for (i = 0; xpad_btn_pad[i] >= 0; i++)
-			set_bit(xpad_btn_pad[i], input_dev->keybit);
+		__set_bit(xpad_common_btn[i], input_dev->keybit);
 
-	/* set up axes */
 	for (i = 0; xpad_abs[i] >= 0; i++)
 		xpad_set_up_abs(input_dev, xpad_abs[i]);
-	if (xpad->dpad_mapping == MAP_DPAD_TO_AXES)
+
+	/* Now set up model-specific ones */
+	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W) {
+		for (i = 0; xpad360_btn[i] >= 0; i++)
+			__set_bit(xpad360_btn[i], input_dev->keybit);
+	} else {
+		for (i = 0; xpad_btn[i] >= 0; i++)
+			__set_bit(xpad_btn[i], input_dev->keybit);
+	}
+
+	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
+		for (i = 0; xpad_btn_pad[i] >= 0; i++)
+			__set_bit(xpad_btn_pad[i], input_dev->keybit);
+	} else {
 		for (i = 0; xpad_abs_pad[i] >= 0; i++)
 		    xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+	}
+
+	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
+		for (i = 0; xpad_btn_triggers[i] >= 0; i++)
+			__set_bit(xpad_btn_triggers[i], input_dev->keybit);
+	} else {
+		for (i = 0; xpad_abs_triggers[i] >= 0; i++)
+			xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
+	}
 
 	error = xpad_init_output(intf, xpad);
 	if (error)
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 02c836e11813..64c102355f53 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -35,10 +35,10 @@ config KEYBOARD_ADP5520
 	  be called adp5520-keys.
 
 config KEYBOARD_ADP5588
-	tristate "ADP5588 I2C QWERTY Keypad and IO Expander"
+	tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
 	depends on I2C
 	help
-	  Say Y here if you want to use a ADP5588 attached to your
+	  Say Y here if you want to use a ADP5588/87 attached to your
 	  system I2C bus.
 
 	  To compile this driver as a module, choose M here: the
@@ -144,13 +144,15 @@ config KEYBOARD_BFIN
 	  module will be called bf54x-keys.
 
 config KEYBOARD_CORGI
-	tristate "Corgi keyboard"
+	tristate "Corgi keyboard (deprecated)"
 	depends on PXA_SHARPSL
-	default y
 	help
 	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
 	  series of PDAs.
 
+	  This driver is now deprecated, use generic GPIO based matrix
+	  keyboard driver instead.
+
 	  To compile this driver as a module, choose M here: the
 	  module will be called corgikbd.
 
@@ -292,6 +294,15 @@ config KEYBOARD_MAX7359
 	  To compile this driver as a module, choose M here: the
 	  module will be called max7359_keypad.
 
+config KEYBOARD_IMX
+	tristate "IMX keypad support"
+	depends on ARCH_MXC
+	help
+	  Enable support for IMX keypad port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called imx_keypad.
+
 config KEYBOARD_NEWTON
 	tristate "Newton keyboard"
 	select SERIO
@@ -329,13 +340,15 @@ config KEYBOARD_PXA930_ROTARY
 	  module will be called pxa930_rotary.
 
 config KEYBOARD_SPITZ
-	tristate "Spitz keyboard"
+	tristate "Spitz keyboard (deprecated)"
 	depends on PXA_SHARPSL
-	default y
 	help
 	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
 	  SL-C3000 and Sl-C3100 series of PDAs.
 
+	  This driver is now deprecated, use generic GPIO based matrix
+	  keyboard driver instead.
+
 	  To compile this driver as a module, choose M here: the
 	  module will be called spitzkbd.
 
@@ -363,7 +376,7 @@ config KEYBOARD_SUNKBD
 
 config KEYBOARD_SH_KEYSC
 	tristate "SuperH KEYSC keypad support"
-	depends on SUPERH
+	depends on SUPERH || ARCH_SHMOBILE
 	help
 	  Say Y here if you want to use a keypad attached to the KEYSC block
 	  on SuperH processors such as sh7722 and sh7343.
@@ -402,12 +415,14 @@ config KEYBOARD_TWL4030
 	  module will be called twl4030_keypad.
 
 config KEYBOARD_TOSA
-	tristate "Tosa keyboard"
+	tristate "Tosa keyboard (deprecated)"
 	depends on MACH_TOSA
-	default y
 	help
 	  Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
 
+	  This driver is now deprecated, use generic GPIO based matrix
+	  keyboard driver instead.
+
 	  To compile this driver as a module, choose M here: the
 	  module will be called tosakbd.
 
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 78654ef65206..706c6b5ed5f4 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
 obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
+obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
 obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
 obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
 obj-$(CONFIG_KEYBOARD_LKKBD)		+= lkkbd.o
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 1edb596d927b..b5142d2d5112 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -1,6 +1,7 @@
 /*
  * File: drivers/input/keyboard/adp5588_keys.c
- * Description:  keypad driver for ADP5588 I2C QWERTY Keypad and IO Expander
+ * Description:  keypad driver for ADP5588 and ADP5587
+ *		 I2C QWERTY Keypad and IO Expander
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
  * Copyright (C) 2008-2009 Analog Devices Inc.
@@ -327,6 +328,7 @@ static const struct dev_pm_ops adp5588_dev_pm_ops = {
 
 static const struct i2c_device_id adp5588_id[] = {
 	{ KBUILD_MODNAME, 0 },
+	{ "adp5587-keys", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, adp5588_id);
@@ -357,5 +359,5 @@ module_exit(adp5588_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
-MODULE_DESCRIPTION("ADP5588 Keypad driver");
+MODULE_DESCRIPTION("ADP5588/87 Keypad driver");
 MODULE_ALIAS("platform:adp5588-keys");
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 7b4056292eaf..d358ef8623f4 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -40,26 +40,26 @@ module_param_named(set, atkbd_set, int, 0);
 MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3 = PS/2 native)");
 
 #if defined(__i386__) || defined(__x86_64__) || defined(__hppa__)
-static int atkbd_reset;
+static bool atkbd_reset;
 #else
-static int atkbd_reset = 1;
+static bool atkbd_reset = true;
 #endif
 module_param_named(reset, atkbd_reset, bool, 0);
 MODULE_PARM_DESC(reset, "Reset keyboard during initialization");
 
-static int atkbd_softrepeat;
+static bool atkbd_softrepeat;
 module_param_named(softrepeat, atkbd_softrepeat, bool, 0);
 MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat");
 
-static int atkbd_softraw = 1;
+static bool atkbd_softraw = true;
 module_param_named(softraw, atkbd_softraw, bool, 0);
 MODULE_PARM_DESC(softraw, "Use software generated rawmode");
 
-static int atkbd_scroll;
+static bool atkbd_scroll;
 module_param_named(scroll, atkbd_scroll, bool, 0);
 MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards");
 
-static int atkbd_extra;
+static bool atkbd_extra;
 module_param_named(extra, atkbd_extra, bool, 0);
 MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
 
@@ -153,16 +153,16 @@ static const unsigned short atkbd_unxlate_table[128] = {
 #define ATKBD_RET_HANGEUL	0xf2
 #define ATKBD_RET_ERR		0xff
 
-#define ATKBD_KEY_UNKNOWN	  0
+#define ATKBD_KEY_UNKNOWN	0
 #define ATKBD_KEY_NULL		255
 
-#define ATKBD_SCR_1		254
-#define ATKBD_SCR_2		253
-#define ATKBD_SCR_4		252
-#define ATKBD_SCR_8		251
-#define ATKBD_SCR_CLICK		250
-#define ATKBD_SCR_LEFT		249
-#define ATKBD_SCR_RIGHT		248
+#define ATKBD_SCR_1		0xfffe
+#define ATKBD_SCR_2		0xfffd
+#define ATKBD_SCR_4		0xfffc
+#define ATKBD_SCR_8		0xfffb
+#define ATKBD_SCR_CLICK		0xfffa
+#define ATKBD_SCR_LEFT		0xfff9
+#define ATKBD_SCR_RIGHT		0xfff8
 
 #define ATKBD_SPECIAL		ATKBD_SCR_RIGHT
 
@@ -177,7 +177,7 @@ static const unsigned short atkbd_unxlate_table[128] = {
 #define ATKBD_XL_HANJA		0x20
 
 static const struct {
-	unsigned char keycode;
+	unsigned short keycode;
 	unsigned char set2;
 } atkbd_scroll_keys[] = {
 	{ ATKBD_SCR_1,     0xc5 },
@@ -206,18 +206,18 @@ struct atkbd {
 	unsigned short keycode[ATKBD_KEYMAP_SIZE];
 	DECLARE_BITMAP(force_release_mask, ATKBD_KEYMAP_SIZE);
 	unsigned char set;
-	unsigned char translated;
-	unsigned char extra;
-	unsigned char write;
-	unsigned char softrepeat;
-	unsigned char softraw;
-	unsigned char scroll;
-	unsigned char enabled;
+	bool translated;
+	bool extra;
+	bool write;
+	bool softrepeat;
+	bool softraw;
+	bool scroll;
+	bool enabled;
 
 	/* Accessed only from interrupt */
 	unsigned char emul;
-	unsigned char resend;
-	unsigned char release;
+	bool resend;
+	bool release;
 	unsigned long xl_bit;
 	unsigned int last;
 	unsigned long time;
@@ -301,18 +301,18 @@ static const unsigned int xl_table[] = {
  * Checks if we should mangle the scancode to extract 'release' bit
  * in translated mode.
  */
-static int atkbd_need_xlate(unsigned long xl_bit, unsigned char code)
+static bool atkbd_need_xlate(unsigned long xl_bit, unsigned char code)
 {
 	int i;
 
 	if (code == ATKBD_RET_EMUL0 || code == ATKBD_RET_EMUL1)
-		return 0;
+		return false;
 
 	for (i = 0; i < ARRAY_SIZE(xl_table); i++)
 		if (code == xl_table[i])
 			return test_bit(i, &xl_bit);
 
-	return 1;
+	return true;
 }
 
 /*
@@ -359,7 +359,7 @@ static unsigned int atkbd_compat_scancode(struct atkbd *atkbd, unsigned int code
  */
 
 static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
-			unsigned int flags)
+				   unsigned int flags)
 {
 	struct atkbd *atkbd = serio_get_drvdata(serio);
 	struct input_dev *dev = atkbd->dev;
@@ -368,20 +368,18 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 	int value;
 	unsigned short keycode;
 
-#ifdef ATKBD_DEBUG
-	printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
-#endif
+	dev_dbg(&serio->dev, "Received %02x flags %02x\n", data, flags);
 
 #if !defined(__i386__) && !defined (__x86_64__)
 	if ((flags & (SERIO_FRAME | SERIO_PARITY)) && (~flags & SERIO_TIMEOUT) && !atkbd->resend && atkbd->write) {
-		printk(KERN_WARNING "atkbd.c: frame/parity error: %02x\n", flags);
+		dev_warn(&serio->dev, "Frame/parity error: %02x\n", flags);
 		serio_write(serio, ATKBD_CMD_RESEND);
-		atkbd->resend = 1;
+		atkbd->resend = true;
 		goto out;
 	}
 
 	if (!flags && data == ATKBD_RET_ACK)
-		atkbd->resend = 0;
+		atkbd->resend = false;
 #endif
 
 	if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_ACK))
@@ -412,32 +410,32 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 	}
 
 	switch (code) {
-		case ATKBD_RET_BAT:
-			atkbd->enabled = 0;
-			serio_reconnect(atkbd->ps2dev.serio);
-			goto out;
-		case ATKBD_RET_EMUL0:
-			atkbd->emul = 1;
-			goto out;
-		case ATKBD_RET_EMUL1:
-			atkbd->emul = 2;
-			goto out;
-		case ATKBD_RET_RELEASE:
-			atkbd->release = 1;
-			goto out;
-		case ATKBD_RET_ACK:
-		case ATKBD_RET_NAK:
-			if (printk_ratelimit())
-				printk(KERN_WARNING "atkbd.c: Spurious %s on %s. "
-				       "Some program might be trying access hardware directly.\n",
-				       data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
-			goto out;
-		case ATKBD_RET_ERR:
-			atkbd->err_count++;
-#ifdef ATKBD_DEBUG
-			printk(KERN_DEBUG "atkbd.c: Keyboard on %s reports too many keys pressed.\n", serio->phys);
-#endif
-			goto out;
+	case ATKBD_RET_BAT:
+		atkbd->enabled = false;
+		serio_reconnect(atkbd->ps2dev.serio);
+		goto out;
+	case ATKBD_RET_EMUL0:
+		atkbd->emul = 1;
+		goto out;
+	case ATKBD_RET_EMUL1:
+		atkbd->emul = 2;
+		goto out;
+	case ATKBD_RET_RELEASE:
+		atkbd->release = true;
+		goto out;
+	case ATKBD_RET_ACK:
+	case ATKBD_RET_NAK:
+		if (printk_ratelimit())
+			dev_warn(&serio->dev,
+				 "Spurious %s on %s. "
+				 "Some program might be trying access hardware directly.\n",
+				 data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
+		goto out;
+	case ATKBD_RET_ERR:
+		atkbd->err_count++;
+		dev_dbg(&serio->dev, "Keyboard on %s reports too many keys pressed.\n",
+			serio->phys);
+		goto out;
 	}
 
 	code = atkbd_compat_scancode(atkbd, code);
@@ -451,71 +449,72 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 		input_event(dev, EV_MSC, MSC_SCAN, code);
 
 	switch (keycode) {
-		case ATKBD_KEY_NULL:
-			break;
-		case ATKBD_KEY_UNKNOWN:
-			printk(KERN_WARNING
-			       "atkbd.c: Unknown key %s (%s set %d, code %#x on %s).\n",
-			       atkbd->release ? "released" : "pressed",
-			       atkbd->translated ? "translated" : "raw",
-			       atkbd->set, code, serio->phys);
-			printk(KERN_WARNING
-			       "atkbd.c: Use 'setkeycodes %s%02x <keycode>' to make it known.\n",
-			       code & 0x80 ? "e0" : "", code & 0x7f);
-			input_sync(dev);
-			break;
-		case ATKBD_SCR_1:
-			scroll = 1 - atkbd->release * 2;
-			break;
-		case ATKBD_SCR_2:
-			scroll = 2 - atkbd->release * 4;
-			break;
-		case ATKBD_SCR_4:
-			scroll = 4 - atkbd->release * 8;
-			break;
-		case ATKBD_SCR_8:
-			scroll = 8 - atkbd->release * 16;
-			break;
-		case ATKBD_SCR_CLICK:
-			click = !atkbd->release;
-			break;
-		case ATKBD_SCR_LEFT:
-			hscroll = -1;
-			break;
-		case ATKBD_SCR_RIGHT:
-			hscroll = 1;
-			break;
-		default:
-			if (atkbd->release) {
-				value = 0;
-				atkbd->last = 0;
-			} else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) {
-				/* Workaround Toshiba laptop multiple keypress */
-				value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2;
-			} else {
-				value = 1;
-				atkbd->last = code;
-				atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2;
-			}
-
-			input_event(dev, EV_KEY, keycode, value);
-			input_sync(dev);
+	case ATKBD_KEY_NULL:
+		break;
+	case ATKBD_KEY_UNKNOWN:
+		dev_warn(&serio->dev,
+			 "Unknown key %s (%s set %d, code %#x on %s).\n",
+			 atkbd->release ? "released" : "pressed",
+			 atkbd->translated ? "translated" : "raw",
+			 atkbd->set, code, serio->phys);
+		dev_warn(&serio->dev,
+			 "Use 'setkeycodes %s%02x <keycode>' to make it known.\n",
+			 code & 0x80 ? "e0" : "", code & 0x7f);
+		input_sync(dev);
+		break;
+	case ATKBD_SCR_1:
+		scroll = 1;
+		break;
+	case ATKBD_SCR_2:
+		scroll = 2;
+		break;
+	case ATKBD_SCR_4:
+		scroll = 4;
+		break;
+	case ATKBD_SCR_8:
+		scroll = 8;
+		break;
+	case ATKBD_SCR_CLICK:
+		click = !atkbd->release;
+		break;
+	case ATKBD_SCR_LEFT:
+		hscroll = -1;
+		break;
+	case ATKBD_SCR_RIGHT:
+		hscroll = 1;
+		break;
+	default:
+		if (atkbd->release) {
+			value = 0;
+			atkbd->last = 0;
+		} else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) {
+			/* Workaround Toshiba laptop multiple keypress */
+			value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2;
+		} else {
+			value = 1;
+			atkbd->last = code;
+			atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2;
+		}
+
+		input_event(dev, EV_KEY, keycode, value);
+		input_sync(dev);
 
-			if (value && test_bit(code, atkbd->force_release_mask)) {
-				input_report_key(dev, keycode, 0);
-				input_sync(dev);
-			}
+		if (value && test_bit(code, atkbd->force_release_mask)) {
+			input_report_key(dev, keycode, 0);
+			input_sync(dev);
+		}
 	}
 
 	if (atkbd->scroll) {
 		if (click != -1)
 			input_report_key(dev, BTN_MIDDLE, click);
-		input_report_rel(dev, REL_WHEEL, scroll);
+		input_report_rel(dev, REL_WHEEL,
+				 atkbd->release ? -scroll : scroll);
 		input_report_rel(dev, REL_HWHEEL, hscroll);
 		input_sync(dev);
 	}
 
-	atkbd->release = 0;
+	atkbd->release = false;
 out:
 	return IRQ_HANDLED;
 }
@@ -634,17 +633,18 @@ static int atkbd_event(struct input_dev *dev,
 
 	switch (type) {
 
-		case EV_LED:
-			atkbd_schedule_event_work(atkbd, ATKBD_LED_EVENT_BIT);
-			return 0;
+	case EV_LED:
+		atkbd_schedule_event_work(atkbd, ATKBD_LED_EVENT_BIT);
+		return 0;
 
-		case EV_REP:
-			if (!atkbd->softrepeat)
-				atkbd_schedule_event_work(atkbd, ATKBD_REP_EVENT_BIT);
-			return 0;
-	}
+	case EV_REP:
+		if (!atkbd->softrepeat)
+			atkbd_schedule_event_work(atkbd, ATKBD_REP_EVENT_BIT);
+		return 0;
 
-	return -1;
+	default:
+		return -1;
+	}
 }
 
 /*
@@ -655,7 +655,7 @@ static int atkbd_event(struct input_dev *dev,
 static inline void atkbd_enable(struct atkbd *atkbd)
 {
 	serio_pause_rx(atkbd->ps2dev.serio);
-	atkbd->enabled = 1;
+	atkbd->enabled = true;
 	serio_continue_rx(atkbd->ps2dev.serio);
 }
 
@@ -667,7 +667,7 @@ static inline void atkbd_enable(struct atkbd *atkbd)
 static inline void atkbd_disable(struct atkbd *atkbd)
 {
 	serio_pause_rx(atkbd->ps2dev.serio);
-	atkbd->enabled = 0;
+	atkbd->enabled = false;
 	serio_continue_rx(atkbd->ps2dev.serio);
 }
 
@@ -688,7 +688,9 @@ static int atkbd_probe(struct atkbd *atkbd)
 
 	if (atkbd_reset)
 		if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_BAT))
-			printk(KERN_WARNING "atkbd.c: keyboard reset failed on %s\n", ps2dev->serio->phys);
+			dev_warn(&ps2dev->serio->dev,
+				 "keyboard reset failed on %s\n",
+				 ps2dev->serio->phys);
 
 /*
  * Then we check the keyboard ID. We should get 0xab83 under normal conditions.
@@ -718,8 +720,9 @@ static int atkbd_probe(struct atkbd *atkbd)
 	atkbd->id = (param[0] << 8) | param[1];
 
 	if (atkbd->id == 0xaca1 && atkbd->translated) {
-		printk(KERN_ERR "atkbd.c: NCD terminal keyboards are only supported on non-translating\n");
-		printk(KERN_ERR "atkbd.c: controllers. Use i8042.direct=1 to disable translation.\n");
+		dev_err(&ps2dev->serio->dev,
+			"NCD terminal keyboards are only supported on non-translating controlelrs. "
+			"Use i8042.direct=1 to disable translation.\n");
 		return -1;
 	}
 
@@ -737,7 +740,7 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra
 	struct ps2dev *ps2dev = &atkbd->ps2dev;
 	unsigned char param[2];
 
-	atkbd->extra = 0;
+	atkbd->extra = false;
 /*
  * For known special keyboards we can go ahead and set the correct set.
  * We check for NCD PS/2 Sun, NorthGate OmniKey 101 and
@@ -756,7 +759,7 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra
 	if (allow_extra) {
 		param[0] = 0x71;
 		if (!ps2_command(ps2dev, param, ATKBD_CMD_EX_ENABLE)) {
-			atkbd->extra = 1;
+			atkbd->extra = true;
 			return 2;
 		}
 	}
@@ -821,7 +824,8 @@ static int atkbd_activate(struct atkbd *atkbd)
  */
 
 	if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) {
-		printk(KERN_ERR "atkbd.c: Failed to enable keyboard on %s\n",
+		dev_err(&ps2dev->serio->dev,
+			"Failed to enable keyboard on %s\n",
 			ps2dev->serio->phys);
 		return -1;
 	}
@@ -1070,9 +1074,13 @@ static void atkbd_set_device_attrs(struct atkbd *atkbd)
 	input_dev->keycodesize = sizeof(unsigned short);
 	input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
 
-	for (i = 0; i < ATKBD_KEYMAP_SIZE; i++)
-		if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
+	for (i = 0; i < ATKBD_KEYMAP_SIZE; i++) {
+		if (atkbd->keycode[i] != KEY_RESERVED &&
+		    atkbd->keycode[i] != ATKBD_KEY_NULL &&
+		    atkbd->keycode[i] < ATKBD_SPECIAL) {
 			__set_bit(atkbd->keycode[i], input_dev->keybit);
+		}
+	}
 }
 
 /*
@@ -1100,12 +1108,14 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
 
 	switch (serio->id.type) {
 
-		case SERIO_8042_XL:
-			atkbd->translated = 1;
-		case SERIO_8042:
-			if (serio->write)
-				atkbd->write = 1;
-			break;
+	case SERIO_8042_XL:
+		atkbd->translated = true;
+		/* Fall through */
+
+	case SERIO_8042:
+		if (serio->write)
+			atkbd->write = true;
+		break;
 	}
 
 	atkbd->softraw = atkbd_softraw;
@@ -1113,7 +1123,7 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
 	atkbd->scroll = atkbd_scroll;
 
 	if (atkbd->softrepeat)
-		atkbd->softraw = 1;
+		atkbd->softraw = true;
 
 	serio_set_drvdata(serio, atkbd);
 
@@ -1172,7 +1182,8 @@ static int atkbd_reconnect(struct serio *serio)
 	int retval = -1;
 
 	if (!atkbd || !drv) {
-		printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
+		dev_dbg(&serio->dev,
+			"reconnect request, but serio is disconnected, ignoring...\n");
 		return -1;
 	}
 
@@ -1286,7 +1297,8 @@ static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t coun
 	struct input_dev *old_dev, *new_dev;
 	unsigned long value;
 	int err;
-	unsigned char old_extra, old_set;
+	bool old_extra;
+	unsigned char old_set;
 
 	if (!atkbd->write)
 		return -EIO;
@@ -1369,7 +1381,7 @@ static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t cou
 	struct input_dev *old_dev, *new_dev;
 	unsigned long value;
 	int err;
-	unsigned char old_scroll;
+	bool old_scroll;
 
 	if (strict_strtoul(buf, 10, &value) || value > 1)
 		return -EINVAL;
@@ -1413,7 +1425,8 @@ static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count)
 	struct input_dev *old_dev, *new_dev;
 	unsigned long value;
 	int err;
-	unsigned char old_set, old_extra;
+	unsigned char old_set;
+	bool old_extra;
 
 	if (!atkbd->write)
 		return -EIO;
@@ -1463,7 +1476,7 @@ static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t
 	struct input_dev *old_dev, *new_dev;
 	unsigned long value;
 	int err;
-	unsigned char old_softrepeat, old_softraw;
+	bool old_softrepeat, old_softraw;
 
 	if (!atkbd->write)
 		return -EIO;
@@ -1483,7 +1496,7 @@ static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t
 		atkbd->dev = new_dev;
 		atkbd->softrepeat = value;
 		if (atkbd->softrepeat)
-			atkbd->softraw = 1;
+			atkbd->softraw = true;
 		atkbd_set_device_attrs(atkbd);
 
 		err = input_register_device(atkbd->dev);
@@ -1513,7 +1526,7 @@ static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t co
 	struct input_dev *old_dev, *new_dev;
 	unsigned long value;
 	int err;
-	unsigned char old_softraw;
+	bool old_softraw;
 
 	if (strict_strtoul(buf, 10, &value) || value > 1)
 		return -EINVAL;
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
index e45740429f7e..bd25a3af1664 100644
--- a/drivers/input/keyboard/ep93xx_keypad.c
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -69,7 +69,7 @@ struct ep93xx_keypad {
 
 	void __iomem *mmio_base;
 
-	unsigned int matrix_keycodes[EP93XX_MATRIX_SIZE];
+	unsigned short keycodes[EP93XX_MATRIX_SIZE];
 
 	int key1;
 	int key2;
@@ -79,24 +79,6 @@ struct ep93xx_keypad {
 	bool enabled;
 };
 
-static void ep93xx_keypad_build_keycode(struct ep93xx_keypad *keypad)
-{
-	struct ep93xx_keypad_platform_data *pdata = keypad->pdata;
-	struct input_dev *input_dev = keypad->input_dev;
-	unsigned int *key;
-	int i;
-
-	key = &pdata->matrix_key_map[0];
-	for (i = 0; i < pdata->matrix_key_map_size; i++, key++) {
-		int row = KEY_ROW(*key);
-		int col = KEY_COL(*key);
-		int code = KEY_VAL(*key);
-
-		keypad->matrix_keycodes[(row << 3) + col] = code;
-		__set_bit(code, input_dev->keybit);
-	}
-}
-
 static irqreturn_t ep93xx_keypad_irq_handler(int irq, void *dev_id)
 {
 	struct ep93xx_keypad *keypad = dev_id;
@@ -107,10 +89,10 @@ static irqreturn_t ep93xx_keypad_irq_handler(int irq, void *dev_id)
 	status = __raw_readl(keypad->mmio_base + KEY_REG);
 
 	keycode = (status & KEY_REG_KEY1_MASK) >> KEY_REG_KEY1_SHIFT;
-	key1 = keypad->matrix_keycodes[keycode];
+	key1 = keypad->keycodes[keycode];
 
 	keycode = (status & KEY_REG_KEY2_MASK) >> KEY_REG_KEY2_SHIFT;
-	key2 = keypad->matrix_keycodes[keycode];
+	key2 = keypad->keycodes[keycode];
 
 	if (status & KEY_REG_2KEYS) {
 		if (keypad->key1 && key1 != keypad->key1 && key2 != keypad->key1)
@@ -256,6 +238,7 @@ static int ep93xx_keypad_resume(struct platform_device *pdev)
 static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
 {
 	struct ep93xx_keypad *keypad;
+	const struct matrix_keymap_data *keymap_data;
 	struct input_dev *input_dev;
 	struct resource *res;
 	int err;
@@ -270,6 +253,12 @@ static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
 		goto failed_free;
 	}
 
+	keymap_data = keypad->pdata->keymap_data;
+	if (!keymap_data) {
+		err = -EINVAL;
+		goto failed_free;
+	}
+
 	keypad->irq = platform_get_irq(pdev, 0);
 	if (!keypad->irq) {
 		err = -ENXIO;
@@ -317,9 +306,9 @@ static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
 	input_dev->open = ep93xx_keypad_open;
 	input_dev->close = ep93xx_keypad_close;
 	input_dev->dev.parent = &pdev->dev;
-	input_dev->keycode = keypad->matrix_keycodes;
-	input_dev->keycodesize = sizeof(keypad->matrix_keycodes[0]);
-	input_dev->keycodemax = ARRAY_SIZE(keypad->matrix_keycodes);
+	input_dev->keycode = keypad->keycodes;
+	input_dev->keycodesize = sizeof(keypad->keycodes[0]);
+	input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
 
 	input_set_drvdata(input_dev, keypad);
 
@@ -327,7 +316,8 @@ static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
 	if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT)
 		input_dev->evbit[0] |= BIT_MASK(EV_REP);
 
-	ep93xx_keypad_build_keycode(keypad);
+	matrix_keypad_build_keymap(keymap_data, 3,
+				   input_dev->keycode, input_dev->keybit);
 	platform_set_drvdata(pdev, keypad);
 
 	err = request_irq(keypad->irq, ep93xx_keypad_irq_handler,
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 1aff3b76effd..2b708aa85553 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -30,13 +30,289 @@ struct gpio_button_data {
 	struct input_dev *input;
 	struct timer_list timer;
 	struct work_struct work;
+	bool disabled;
 };
 
 struct gpio_keys_drvdata {
 	struct input_dev *input;
+	struct mutex disable_lock;
+	unsigned int n_buttons;
 	struct gpio_button_data data[0];
 };
 
+/*
+ * SYSFS interface for enabling/disabling keys and switches:
+ *
+ * There are 4 attributes under /sys/devices/platform/gpio-keys/
+ *	keys [ro]              - bitmap of keys (EV_KEY) which can be
+ *	                         disabled
+ *	switches [ro]          - bitmap of switches (EV_SW) which can be
+ *	                         disabled
+ *	disabled_keys [rw]     - bitmap of keys currently disabled
+ *	disabled_switches [rw] - bitmap of switches currently disabled
+ *
+ * Userland can change these values and hence disable event generation
+ * for each key (or switch). Disabling a key means its interrupt line
+ * is disabled.
+ *
+ * For example, if we have following switches set up as gpio-keys:
+ *	SW_DOCK = 5
+ *	SW_CAMERA_LENS_COVER = 9
+ *	SW_KEYPAD_SLIDE = 10
+ *	SW_FRONT_PROXIMITY = 11
+ * This is read from switches:
+ *	11-9,5
+ * Next we want to disable proximity (11) and dock (5), we write:
+ *	11,5
+ * to file disabled_switches. Now proximity and dock IRQs are disabled.
+ * This can be verified by reading the file disabled_switches:
+ *	11,5
+ * If we now want to enable proximity (11) switch we write:
+ *	5
+ * to disabled_switches.
+ *
+ * We can disable only those keys which don't allow sharing the irq.
+ */
+
+/**
+ * get_n_events_by_type() - returns maximum number of events per @type
+ * @type: type of button (%EV_KEY, %EV_SW)
+ *
+ * Return value of this function can be used to allocate bitmap
+ * large enough to hold all bits for given type.
+ */
+static inline int get_n_events_by_type(int type)
+{
+	BUG_ON(type != EV_SW && type != EV_KEY);
+
+	return (type == EV_KEY) ? KEY_CNT : SW_CNT;
+}
+
+/**
+ * gpio_keys_disable_button() - disables given GPIO button
+ * @bdata: button data for button to be disabled
+ *
+ * Disables button pointed by @bdata. This is done by masking
+ * IRQ line. After this function is called, button won't generate
+ * input events anymore. Note that one can only disable buttons
+ * that don't share IRQs.
+ *
+ * Make sure that @bdata->disable_lock is locked when entering
+ * this function to avoid races when concurrent threads are
+ * disabling buttons at the same time.
+ */
+static void gpio_keys_disable_button(struct gpio_button_data *bdata)
+{
+	if (!bdata->disabled) {
+		/*
+		 * Disable IRQ and possible debouncing timer.
+		 */
+		disable_irq(gpio_to_irq(bdata->button->gpio));
+		if (bdata->button->debounce_interval)
+			del_timer_sync(&bdata->timer);
+
+		bdata->disabled = true;
+	}
+}
+
+/**
+ * gpio_keys_enable_button() - enables given GPIO button
+ * @bdata: button data for button to be disabled
+ *
+ * Enables given button pointed by @bdata.
+ *
+ * Make sure that @bdata->disable_lock is locked when entering
+ * this function to avoid races with concurrent threads trying
+ * to enable the same button at the same time.
+ */
+static void gpio_keys_enable_button(struct gpio_button_data *bdata)
+{
+	if (bdata->disabled) {
+		enable_irq(gpio_to_irq(bdata->button->gpio));
+		bdata->disabled = false;
+	}
+}
+
+/**
+ * gpio_keys_attr_show_helper() - fill in stringified bitmap of buttons
+ * @ddata: pointer to drvdata
+ * @buf: buffer where stringified bitmap is written
+ * @type: button type (%EV_KEY, %EV_SW)
+ * @only_disabled: does caller want only those buttons that are
+ *                 currently disabled or all buttons that can be
+ *                 disabled
+ *
+ * This function writes buttons that can be disabled to @buf. If
+ * @only_disabled is true, then @buf contains only those buttons
+ * that are currently disabled. Returns 0 on success or negative
+ * errno on failure.
+ */
+static ssize_t gpio_keys_attr_show_helper(struct gpio_keys_drvdata *ddata,
+					  char *buf, unsigned int type,
+					  bool only_disabled)
+{
+	int n_events = get_n_events_by_type(type);
+	unsigned long *bits;
+	ssize_t ret;
+	int i;
+
+	bits = kcalloc(BITS_TO_LONGS(n_events), sizeof(*bits), GFP_KERNEL);
+	if (!bits)
+		return -ENOMEM;
+
+	for (i = 0; i < ddata->n_buttons; i++) {
+		struct gpio_button_data *bdata = &ddata->data[i];
+
+		if (bdata->button->type != type)
+			continue;
+
+		if (only_disabled && !bdata->disabled)
+			continue;
+
+		__set_bit(bdata->button->code, bits);
+	}
+
+	ret = bitmap_scnlistprintf(buf, PAGE_SIZE - 2, bits, n_events);
+	buf[ret++] = '\n';
+	buf[ret] = '\0';
+
+	kfree(bits);
+
+	return ret;
+}
+
+/**
+ * gpio_keys_attr_store_helper() - enable/disable buttons based on given bitmap
+ * @ddata: pointer to drvdata
+ * @buf: buffer from userspace that contains stringified bitmap
+ * @type: button type (%EV_KEY, %EV_SW)
+ *
+ * This function parses stringified bitmap from @buf and disables/enables
+ * GPIO buttons accordinly. Returns 0 on success and negative error
+ * on failure.
+ */
+static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata,
+					   const char *buf, unsigned int type)
+{
+	int n_events = get_n_events_by_type(type);
+	unsigned long *bits;
+	ssize_t error;
+	int i;
+
+	bits = kcalloc(BITS_TO_LONGS(n_events), sizeof(*bits), GFP_KERNEL);
+	if (!bits)
+		return -ENOMEM;
+
+	error = bitmap_parselist(buf, bits, n_events);
+	if (error)
+		goto out;
+
+	/* First validate */
+	for (i = 0; i < ddata->n_buttons; i++) {
+		struct gpio_button_data *bdata = &ddata->data[i];
+
+		if (bdata->button->type != type)
+			continue;
+
+		if (test_bit(bdata->button->code, bits) &&
+		    !bdata->button->can_disable) {
+			error = -EINVAL;
+			goto out;
+		}
+	}
+
+	mutex_lock(&ddata->disable_lock);
+
+	for (i = 0; i < ddata->n_buttons; i++) {
+		struct gpio_button_data *bdata = &ddata->data[i];
+
+		if (bdata->button->type != type)
+			continue;
+
+		if (test_bit(bdata->button->code, bits))
+			gpio_keys_disable_button(bdata);
+		else
+			gpio_keys_enable_button(bdata);
+	}
+
+	mutex_unlock(&ddata->disable_lock);
+
+out:
+	kfree(bits);
+	return error;
+}
+
+#define ATTR_SHOW_FN(name, type, only_disabled)				\
+static ssize_t gpio_keys_show_##name(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     char *buf)				\
+{									\
+	struct platform_device *pdev = to_platform_device(dev);		\
+	struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);	\
+									\
+	return gpio_keys_attr_show_helper(ddata, buf,			\
+					  type, only_disabled);		\
+}
+
+ATTR_SHOW_FN(keys, EV_KEY, false);
+ATTR_SHOW_FN(switches, EV_SW, false);
+ATTR_SHOW_FN(disabled_keys, EV_KEY, true);
+ATTR_SHOW_FN(disabled_switches, EV_SW, true);
+
+/*
+ * ATTRIBUTES:
+ *
+ * /sys/devices/platform/gpio-keys/keys [ro]
+ * /sys/devices/platform/gpio-keys/switches [ro]
+ */
+static DEVICE_ATTR(keys, S_IRUGO, gpio_keys_show_keys, NULL);
+static DEVICE_ATTR(switches, S_IRUGO, gpio_keys_show_switches, NULL);
+
+#define ATTR_STORE_FN(name, type)					\
+static ssize_t gpio_keys_store_##name(struct device *dev,		\
+				      struct device_attribute *attr,	\
+				      const char *buf,			\
+				      size_t count)			\
+{									\
+	struct platform_device *pdev = to_platform_device(dev);		\
+	struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);	\
+	ssize_t error;							\
+									\
+	error = gpio_keys_attr_store_helper(ddata, buf, type);		\
+	if (error)							\
+		return error;						\
+									\
+	return count;							\
+}
+
+ATTR_STORE_FN(disabled_keys, EV_KEY);
+ATTR_STORE_FN(disabled_switches, EV_SW);
+
+/*
+ * ATTRIBUTES:
+ *
+ * /sys/devices/platform/gpio-keys/disabled_keys [rw]
+ * /sys/devices/platform/gpio-keys/disables_switches [rw]
+ */
+static DEVICE_ATTR(disabled_keys, S_IWUSR | S_IRUGO,
+		   gpio_keys_show_disabled_keys,
+		   gpio_keys_store_disabled_keys);
+static DEVICE_ATTR(disabled_switches, S_IWUSR | S_IRUGO,
+		   gpio_keys_show_disabled_switches,
+		   gpio_keys_store_disabled_switches);
+
+static struct attribute *gpio_keys_attrs[] = {
+	&dev_attr_keys.attr,
+	&dev_attr_switches.attr,
+	&dev_attr_disabled_keys.attr,
+	&dev_attr_disabled_switches.attr,
+	NULL,
+};
+
+static struct attribute_group gpio_keys_attr_group = {
+	.attrs = gpio_keys_attrs,
+};
+
 static void gpio_keys_report_event(struct gpio_button_data *bdata)
 {
 	struct gpio_keys_button *button = bdata->button;
@@ -79,11 +355,13 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int __devinit gpio_keys_setup_key(struct device *dev,
+static int __devinit gpio_keys_setup_key(struct platform_device *pdev,
 					 struct gpio_button_data *bdata,
 					 struct gpio_keys_button *button)
 {
 	char *desc = button->desc ? button->desc : "gpio_keys";
+	struct device *dev = &pdev->dev;
+	unsigned long irqflags;
 	int irq, error;
 
 	setup_timer(&bdata->timer, gpio_keys_timer, (unsigned long)bdata);
@@ -112,10 +390,15 @@ static int __devinit gpio_keys_setup_key(struct device *dev,
 		goto fail3;
 	}
 
-	error = request_irq(irq, gpio_keys_isr,
-			    IRQF_SHARED |
-			    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			    desc, bdata);
+	irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
+	/*
+	 * If platform has specified that the button can be disabled,
+	 * we don't want it to share the interrupt line.
+	 */
+	if (!button->can_disable)
+		irqflags |= IRQF_SHARED;
+
+	error = request_irq(irq, gpio_keys_isr, irqflags, desc, bdata);
 	if (error) {
 		dev_err(dev, "Unable to claim irq %d; error %d\n",
 			irq, error);
@@ -149,6 +432,10 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 		goto fail1;
 	}
 
+	ddata->input = input;
+	ddata->n_buttons = pdata->nbuttons;
+	mutex_init(&ddata->disable_lock);
+
 	platform_set_drvdata(pdev, ddata);
 
 	input->name = pdev->name;
@@ -164,8 +451,6 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 	if (pdata->rep)
 		__set_bit(EV_REP, input->evbit);
 
-	ddata->input = input;
-
 	for (i = 0; i < pdata->nbuttons; i++) {
 		struct gpio_keys_button *button = &pdata->buttons[i];
 		struct gpio_button_data *bdata = &ddata->data[i];
@@ -174,7 +459,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 		bdata->input = input;
 		bdata->button = button;
 
-		error = gpio_keys_setup_key(dev, bdata, button);
+		error = gpio_keys_setup_key(pdev, bdata, button);
 		if (error)
 			goto fail2;
 
@@ -184,13 +469,20 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 		input_set_capability(input, type, button->code);
 	}
 
-	error = input_register_device(input);
+	error = sysfs_create_group(&pdev->dev.kobj, &gpio_keys_attr_group);
 	if (error) {
-		dev_err(dev, "Unable to register input device, "
-			"error: %d\n", error);
+		dev_err(dev, "Unable to export keys/switches, error: %d\n",
+			error);
 		goto fail2;
 	}
 
+	error = input_register_device(input);
+	if (error) {
+		dev_err(dev, "Unable to register input device, error: %d\n",
+			error);
+		goto fail3;
+	}
+
 	/* get current state of buttons */
 	for (i = 0; i < pdata->nbuttons; i++)
 		gpio_keys_report_event(&ddata->data[i]);
@@ -200,6 +492,8 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 
 	return 0;
 
+ fail3:
+	sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
  fail2:
 	while (--i >= 0) {
 		free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]);
@@ -224,6 +518,8 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev)
 	struct input_dev *input = ddata->input;
 	int i;
 
+	sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
+
 	device_init_wakeup(&pdev->dev, 0);
 
 	for (i = 0; i < pdata->nbuttons; i++) {
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
new file mode 100644
index 000000000000..2ee5b798024d
--- /dev/null
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -0,0 +1,594 @@
+/*
+ * Driver for the IMX keypad port.
+ * Copyright (C) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * <<Power management needs to be implemented>>.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/timer.h>
+
+/*
+ * Keypad Controller registers (halfword)
+ */
+#define KPCR		0x00 /* Keypad Control Register */
+
+#define KPSR		0x02 /* Keypad Status Register */
+#define KBD_STAT_KPKD	(0x1 << 0) /* Key Press Interrupt Status bit (w1c) */
+#define KBD_STAT_KPKR	(0x1 << 1) /* Key Release Interrupt Status bit (w1c) */
+#define KBD_STAT_KDSC	(0x1 << 2) /* Key Depress Synch Chain Status bit (w1c)*/
+#define KBD_STAT_KRSS	(0x1 << 3) /* Key Release Synch Status bit (w1c)*/
+#define KBD_STAT_KDIE	(0x1 << 8) /* Key Depress Interrupt Enable Status bit */
+#define KBD_STAT_KRIE	(0x1 << 9) /* Key Release Interrupt Enable */
+#define KBD_STAT_KPPEN	(0x1 << 10) /* Keypad Clock Enable */
+
+#define KDDR		0x04 /* Keypad Data Direction Register */
+#define KPDR		0x06 /* Keypad Data Register */
+
+#define MAX_MATRIX_KEY_ROWS	8
+#define MAX_MATRIX_KEY_COLS	8
+#define MATRIX_ROW_SHIFT	3
+
+#define MAX_MATRIX_KEY_NUM	(MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS)
+
+struct imx_keypad {
+
+	struct clk *clk;
+	struct input_dev *input_dev;
+	void __iomem *mmio_base;
+
+	int			irq;
+	struct timer_list	check_matrix_timer;
+
+	/*
+	 * The matrix is stable only if no changes are detected after
+	 * IMX_KEYPAD_SCANS_FOR_STABILITY scans
+	 */
+#define IMX_KEYPAD_SCANS_FOR_STABILITY 3
+	int			stable_count;
+
+	bool			enabled;
+
+	/* Masks for enabled rows/cols */
+	unsigned short		rows_en_mask;
+	unsigned short		cols_en_mask;
+
+	unsigned short		keycodes[MAX_MATRIX_KEY_NUM];
+
+	/*
+	 * Matrix states:
+	 * -stable: achieved after a complete debounce process.
+	 * -unstable: used in the debouncing process.
+	 */
+	unsigned short		matrix_stable_state[MAX_MATRIX_KEY_COLS];
+	unsigned short		matrix_unstable_state[MAX_MATRIX_KEY_COLS];
+};
+
+/* Scan the matrix and return the new state in *matrix_volatile_state. */
+static void imx_keypad_scan_matrix(struct imx_keypad *keypad,
+				  unsigned short *matrix_volatile_state)
+{
+	int col;
+	unsigned short reg_val;
+
+	for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
+		if ((keypad->cols_en_mask & (1 << col)) == 0)
+			continue;
+		/*
+		 * Discharge keypad capacitance:
+		 * 2. write 1s on column data.
+		 * 3. configure columns as totem-pole to discharge capacitance.
+		 * 4. configure columns as open-drain.
+		 */
+		reg_val = readw(keypad->mmio_base + KPDR);
+		reg_val |= 0xff00;
+		writew(reg_val, keypad->mmio_base + KPDR);
+
+		reg_val = readw(keypad->mmio_base + KPCR);
+		reg_val &= ~((keypad->cols_en_mask & 0xff) << 8);
+		writew(reg_val, keypad->mmio_base + KPCR);
+
+		udelay(2);
+
+		reg_val = readw(keypad->mmio_base + KPCR);
+		reg_val |= (keypad->cols_en_mask & 0xff) << 8;
+		writew(reg_val, keypad->mmio_base + KPCR);
+
+		/*
+		 * 5. Write a single column to 0, others to 1.
+		 * 6. Sample row inputs and save data.
+		 * 7. Repeat steps 2 - 6 for remaining columns.
+		 */
+		reg_val = readw(keypad->mmio_base + KPDR);
+		reg_val &= ~(1 << (8 + col));
+		writew(reg_val, keypad->mmio_base + KPDR);
+
+		/*
+		 * Delay added to avoid propagating the 0 from column to row
+		 * when scanning.
+		 */
+		udelay(5);
+
+		/*
+		 * 1s in matrix_volatile_state[col] means key pressures
+		 * throw data from non enabled rows.
+		 */
+		reg_val = readw(keypad->mmio_base + KPDR);
+		matrix_volatile_state[col] = (~reg_val) & keypad->rows_en_mask;
+	}
+
+	/*
+	 * Return in standby mode:
+	 * 9. write 0s to columns
+	 */
+	reg_val = readw(keypad->mmio_base + KPDR);
+	reg_val &= 0x00ff;
+	writew(reg_val, keypad->mmio_base + KPDR);
+}
+
+/*
+ * Compare the new matrix state (volatile) with the stable one stored in
+ * keypad->matrix_stable_state and fire events if changes are detected.
+ */
+static void imx_keypad_fire_events(struct imx_keypad *keypad,
+				   unsigned short *matrix_volatile_state)
+{
+	struct input_dev *input_dev = keypad->input_dev;
+	int row, col;
+
+	for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
+		unsigned short bits_changed;
+		int code;
+
+		if ((keypad->cols_en_mask & (1 << col)) == 0)
+			continue; /* Column is not enabled */
+
+		bits_changed = keypad->matrix_stable_state[col] ^
+						matrix_volatile_state[col];
+
+		if (bits_changed == 0)
+			continue; /* Column does not contain changes */
+
+		for (row = 0; row < MAX_MATRIX_KEY_ROWS; row++) {
+			if ((keypad->rows_en_mask & (1 << row)) == 0)
+				continue; /* Row is not enabled */
+			if ((bits_changed & (1 << row)) == 0)
+				continue; /* Row does not contain changes */
+
+			code = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT);
+			input_event(input_dev, EV_MSC, MSC_SCAN, code);
+			input_report_key(input_dev, keypad->keycodes[code],
+				matrix_volatile_state[col] & (1 << row));
+			dev_dbg(&input_dev->dev, "Event code: %d, val: %d",
+				keypad->keycodes[code],
+				matrix_volatile_state[col] & (1 << row));
+		}
+	}
+	input_sync(input_dev);
+}
+
+/*
+ * imx_keypad_check_for_events is the timer handler.
+ */
+static void imx_keypad_check_for_events(unsigned long data)
+{
+	struct imx_keypad *keypad = (struct imx_keypad *) data;
+	unsigned short matrix_volatile_state[MAX_MATRIX_KEY_COLS];
+	unsigned short reg_val;
+	bool state_changed, is_zero_matrix;
+	int i;
+
+	memset(matrix_volatile_state, 0, sizeof(matrix_volatile_state));
+
+	imx_keypad_scan_matrix(keypad, matrix_volatile_state);
+
+	state_changed = false;
+	for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) {
+		if ((keypad->cols_en_mask & (1 << i)) == 0)
+			continue;
+
+		if (keypad->matrix_unstable_state[i] ^ matrix_volatile_state[i]) {
+			state_changed = true;
+			break;
+		}
+	}
+
+	/*
+	 * If the matrix state is changed from the previous scan
+	 *   (Re)Begin the debouncing process, saving the new state in
+	 *    keypad->matrix_unstable_state.
+	 * else
+	 *   Increase the count of number of scans with a stable state.
+	 */
+	if (state_changed) {
+		memcpy(keypad->matrix_unstable_state, matrix_volatile_state,
+			sizeof(matrix_volatile_state));
+		keypad->stable_count = 0;
+	} else
+		keypad->stable_count++;
+
+	/*
+	 * If the matrix is not as stable as we want reschedule scan
+	 * in the near future.
+	 */
+	if (keypad->stable_count < IMX_KEYPAD_SCANS_FOR_STABILITY) {
+		mod_timer(&keypad->check_matrix_timer,
+			  jiffies + msecs_to_jiffies(10));
+		return;
+	}
+
+	/*
+	 * If the matrix state is stable, fire the events and save the new
+	 * stable state. Note, if the matrix is kept stable for longer
+	 * (keypad->stable_count > IMX_KEYPAD_SCANS_FOR_STABILITY) all
+	 * events have already been generated.
+	 */
+	if (keypad->stable_count == IMX_KEYPAD_SCANS_FOR_STABILITY) {
+		imx_keypad_fire_events(keypad, matrix_volatile_state);
+
+		memcpy(keypad->matrix_stable_state, matrix_volatile_state,
+			sizeof(matrix_volatile_state));
+	}
+
+	is_zero_matrix = true;
+	for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) {
+		if (matrix_volatile_state[i] != 0) {
+			is_zero_matrix = false;
+			break;
+		}
+	}
+
+
+	if (is_zero_matrix) {
+		/*
+		 * All keys have been released. Enable only the KDI
+		 * interrupt for future key presses (clear the KDI
+		 * status bit and its sync chain before that).
+		 */
+		reg_val = readw(keypad->mmio_base + KPSR);
+		reg_val |= KBD_STAT_KPKD | KBD_STAT_KDSC;
+		writew(reg_val, keypad->mmio_base + KPSR);
+
+		reg_val = readw(keypad->mmio_base + KPSR);
+		reg_val |= KBD_STAT_KDIE;
+		reg_val &= ~KBD_STAT_KRIE;
+		writew(reg_val, keypad->mmio_base + KPSR);
+	} else {
+		/*
+		 * Some keys are still pressed. Schedule a rescan in
+		 * attempt to detect multiple key presses and enable
+		 * the KRI interrupt to react quickly to key release
+		 * event.
+		 */
+		mod_timer(&keypad->check_matrix_timer,
+			  jiffies + msecs_to_jiffies(60));
+
+		reg_val = readw(keypad->mmio_base + KPSR);
+		reg_val |= KBD_STAT_KPKR | KBD_STAT_KRSS;
+		writew(reg_val, keypad->mmio_base + KPSR);
+
+		reg_val = readw(keypad->mmio_base + KPSR);
+		reg_val |= KBD_STAT_KRIE;
+		reg_val &= ~KBD_STAT_KDIE;
+		writew(reg_val, keypad->mmio_base + KPSR);
+	}
+}
+
+static irqreturn_t imx_keypad_irq_handler(int irq, void *dev_id)
+{
+	struct imx_keypad *keypad = dev_id;
+	unsigned short reg_val;
+
+	reg_val = readw(keypad->mmio_base + KPSR);
+
+	/* Disable both interrupt types */
+	reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE);
+	/* Clear interrupts status bits */
+	reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD;
+	writew(reg_val, keypad->mmio_base + KPSR);
+
+	if (keypad->enabled) {
+		/* The matrix is supposed to be changed */
+		keypad->stable_count = 0;
+
+		/* Schedule the scanning procedure near in the future */
+		mod_timer(&keypad->check_matrix_timer,
+			  jiffies + msecs_to_jiffies(2));
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void imx_keypad_config(struct imx_keypad *keypad)
+{
+	unsigned short reg_val;
+
+	/*
+	 * Include enabled rows in interrupt generation (KPCR[7:0])
+	 * Configure keypad columns as open-drain (KPCR[15:8])
+	 */
+	reg_val = readw(keypad->mmio_base + KPCR);
+	reg_val |= keypad->rows_en_mask & 0xff;		/* rows */
+	reg_val |= (keypad->cols_en_mask & 0xff) << 8;	/* cols */
+	writew(reg_val, keypad->mmio_base + KPCR);
+
+	/* Write 0's to KPDR[15:8] (Colums) */
+	reg_val = readw(keypad->mmio_base + KPDR);
+	reg_val &= 0x00ff;
+	writew(reg_val, keypad->mmio_base + KPDR);
+
+	/* Configure columns as output, rows as input (KDDR[15:0]) */
+	writew(0xff00, keypad->mmio_base + KDDR);
+
+	/*
+	 * Clear Key Depress and Key Release status bit.
+	 * Clear both synchronizer chain.
+	 */
+	reg_val = readw(keypad->mmio_base + KPSR);
+	reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD |
+		   KBD_STAT_KDSC | KBD_STAT_KRSS;
+	writew(reg_val, keypad->mmio_base + KPSR);
+
+	/* Enable KDI and disable KRI (avoid false release events). */
+	reg_val |= KBD_STAT_KDIE;
+	reg_val &= ~KBD_STAT_KRIE;
+	writew(reg_val, keypad->mmio_base + KPSR);
+}
+
+static void imx_keypad_inhibit(struct imx_keypad *keypad)
+{
+	unsigned short reg_val;
+
+	/* Inhibit KDI and KRI interrupts. */
+	reg_val = readw(keypad->mmio_base + KPSR);
+	reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE);
+	writew(reg_val, keypad->mmio_base + KPSR);
+
+	/* Colums as open drain and disable all rows */
+	writew(0xff00, keypad->mmio_base + KPCR);
+}
+
+static void imx_keypad_close(struct input_dev *dev)
+{
+	struct imx_keypad *keypad = input_get_drvdata(dev);
+
+	dev_dbg(&dev->dev, ">%s\n", __func__);
+
+	/* Mark keypad as being inactive */
+	keypad->enabled = false;
+	synchronize_irq(keypad->irq);
+	del_timer_sync(&keypad->check_matrix_timer);
+
+	imx_keypad_inhibit(keypad);
+
+	/* Disable clock unit */
+	clk_disable(keypad->clk);
+}
+
+static int imx_keypad_open(struct input_dev *dev)
+{
+	struct imx_keypad *keypad = input_get_drvdata(dev);
+
+	dev_dbg(&dev->dev, ">%s\n", __func__);
+
+	/* We became active from now */
+	keypad->enabled = true;
+
+	/* Enable the kpp clock */
+	clk_enable(keypad->clk);
+	imx_keypad_config(keypad);
+
+	/* Sanity control, not all the rows must be actived now. */
+	if ((readw(keypad->mmio_base + KPDR) & keypad->rows_en_mask) == 0) {
+		dev_err(&dev->dev,
+			"too many keys pressed, control pins initialisation\n");
+		goto open_err;
+	}
+
+	return 0;
+
+open_err:
+	imx_keypad_close(dev);
+	return -EIO;
+}
+
+static int __devinit imx_keypad_probe(struct platform_device *pdev)
+{
+	const struct matrix_keymap_data *keymap_data = pdev->dev.platform_data;
+	struct imx_keypad *keypad;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int irq, error, i;
+
+	if (keymap_data == NULL) {
+		dev_err(&pdev->dev, "no keymap defined\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no irq defined in platform data\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no I/O memory defined in platform data\n");
+		return -EINVAL;
+	}
+
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to request I/O memory\n");
+		return -EBUSY;
+	}
+
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		dev_err(&pdev->dev, "failed to allocate the input device\n");
+		error = -ENOMEM;
+		goto failed_rel_mem;
+	}
+
+	keypad = kzalloc(sizeof(struct imx_keypad), GFP_KERNEL);
+	if (!keypad) {
+		dev_err(&pdev->dev, "not enough memory for driver data\n");
+		error = -ENOMEM;
+		goto failed_free_input;
+	}
+
+	keypad->input_dev = input_dev;
+	keypad->irq = irq;
+	keypad->stable_count = 0;
+
+	setup_timer(&keypad->check_matrix_timer,
+		    imx_keypad_check_for_events, (unsigned long) keypad);
+
+	keypad->mmio_base = ioremap(res->start, resource_size(res));
+	if (keypad->mmio_base == NULL) {
+		dev_err(&pdev->dev, "failed to remap I/O memory\n");
+		error = -ENOMEM;
+		goto failed_free_priv;
+	}
+
+	keypad->clk = clk_get(&pdev->dev, "kpp");
+	if (IS_ERR(keypad->clk)) {
+		dev_err(&pdev->dev, "failed to get keypad clock\n");
+		error = PTR_ERR(keypad->clk);
+		goto failed_unmap;
+	}
+
+	/* Search for rows and cols enabled */
+	for (i = 0; i < keymap_data->keymap_size; i++) {
+		keypad->rows_en_mask |= 1 << KEY_ROW(keymap_data->keymap[i]);
+		keypad->cols_en_mask |= 1 << KEY_COL(keymap_data->keymap[i]);
+	}
+
+	if (keypad->rows_en_mask > ((1 << MAX_MATRIX_KEY_ROWS) - 1) ||
+	   keypad->cols_en_mask > ((1 << MAX_MATRIX_KEY_COLS) - 1)) {
+		dev_err(&pdev->dev,
+			"invalid key data (too many rows or colums)\n");
+		error = -EINVAL;
+		goto failed_clock_put;
+	}
+	dev_dbg(&pdev->dev, "enabled rows mask: %x\n", keypad->rows_en_mask);
+	dev_dbg(&pdev->dev, "enabled cols mask: %x\n", keypad->cols_en_mask);
+
+	/* Init the Input device */
+	input_dev->name = pdev->name;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->open = imx_keypad_open;
+	input_dev->close = imx_keypad_close;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_dev->keycode = keypad->keycodes;
+	input_dev->keycodesize = sizeof(keypad->keycodes[0]);
+	input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
+
+	matrix_keypad_build_keymap(keymap_data, MATRIX_ROW_SHIFT,
+				keypad->keycodes, input_dev->keybit);
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(input_dev, keypad);
+
+	/* Ensure that the keypad will stay dormant until opened */
+	imx_keypad_inhibit(keypad);
+
+	error = request_irq(irq, imx_keypad_irq_handler, IRQF_DISABLED,
+			    pdev->name, keypad);
+	if (error) {
+		dev_err(&pdev->dev, "failed to request IRQ\n");
+		goto failed_clock_put;
+	}
+
+	/* Register the input device */
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		goto failed_free_irq;
+	}
+
+	platform_set_drvdata(pdev, keypad);
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+
+failed_free_irq:
+	free_irq(irq, pdev);
+failed_clock_put:
+	clk_put(keypad->clk);
+failed_unmap:
+	iounmap(keypad->mmio_base);
+failed_free_priv:
+	kfree(keypad);
+failed_free_input:
+	input_free_device(input_dev);
+failed_rel_mem:
+	release_mem_region(res->start, resource_size(res));
+	return error;
+}
+
+static int __devexit imx_keypad_remove(struct platform_device *pdev)
+{
+	struct imx_keypad *keypad = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	dev_dbg(&pdev->dev, ">%s\n", __func__);
+
+	platform_set_drvdata(pdev, NULL);
+
+	input_unregister_device(keypad->input_dev);
+
+	free_irq(keypad->irq, keypad);
+	clk_put(keypad->clk);
+
+	iounmap(keypad->mmio_base);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	kfree(keypad);
+
+	return 0;
+}
+
+static struct platform_driver imx_keypad_driver = {
+	.driver		= {
+		.name	= "imx-keypad",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= imx_keypad_probe,
+	.remove		= __devexit_p(imx_keypad_remove),
+};
+
+static int __init imx_keypad_init(void)
+{
+	return platform_driver_register(&imx_keypad_driver);
+}
+
+static void __exit imx_keypad_exit(void)
+{
+	platform_driver_unregister(&imx_keypad_driver);
+}
+
+module_init(imx_keypad_init);
+module_exit(imx_keypad_exit);
+
+MODULE_AUTHOR("Alberto Panizzo <maramaopercheseimorto@gmail.com>");
+MODULE_DESCRIPTION("IMX Keypad Port Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:imx-keypad");
diff --git a/drivers/input/keyboard/qt2160.c b/drivers/input/keyboard/qt2160.c
index 191cc51d6cf8..31f30087b591 100644
--- a/drivers/input/keyboard/qt2160.c
+++ b/drivers/input/keyboard/qt2160.c
@@ -362,7 +362,7 @@ static int __devexit qt2160_remove(struct i2c_client *client)
 	return 0;
 }
 
-static struct i2c_device_id qt2160_idtable[] = {
+static const struct i2c_device_id qt2160_idtable[] = {
 	{ "qt2160", 0, },
 	{ }
 };
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
index 8e9380bfed40..854e2035cd6e 100644
--- a/drivers/input/keyboard/sh_keysc.c
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -19,101 +19,141 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
+#include <linux/bitmap.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#define KYCR1_OFFS   0x00
-#define KYCR2_OFFS   0x04
-#define KYINDR_OFFS  0x08
-#define KYOUTDR_OFFS 0x0c
-
-#define KYCR2_IRQ_LEVEL    0x10
-#define KYCR2_IRQ_DISABLED 0x00
-
 static const struct {
 	unsigned char kymd, keyout, keyin;
 } sh_keysc_mode[] = {
 	[SH_KEYSC_MODE_1] = { 0, 6, 5 },
 	[SH_KEYSC_MODE_2] = { 1, 5, 6 },
 	[SH_KEYSC_MODE_3] = { 2, 4, 7 },
+	[SH_KEYSC_MODE_4] = { 3, 6, 6 },
+	[SH_KEYSC_MODE_5] = { 4, 6, 7 },
+	[SH_KEYSC_MODE_6] = { 5, 7, 7 },
 };
 
 struct sh_keysc_priv {
 	void __iomem *iomem_base;
 	struct clk *clk;
-	unsigned long last_keys;
+	DECLARE_BITMAP(last_keys, SH_KEYSC_MAXKEYS);
 	struct input_dev *input;
 	struct sh_keysc_info pdata;
 };
 
+#define KYCR1 0
+#define KYCR2 1
+#define KYINDR 2
+#define KYOUTDR 3
+
+#define KYCR2_IRQ_LEVEL    0x10
+#define KYCR2_IRQ_DISABLED 0x00
+
+static unsigned long sh_keysc_read(struct sh_keysc_priv *p, int reg_nr)
+{
+	return ioread16(p->iomem_base + (reg_nr << 2));
+}
+
+static void sh_keysc_write(struct sh_keysc_priv *p, int reg_nr,
+			   unsigned long value)
+{
+	iowrite16(value, p->iomem_base + (reg_nr << 2));
+}
+
+static void sh_keysc_level_mode(struct sh_keysc_priv *p,
+				unsigned long keys_set)
+{
+	struct sh_keysc_info *pdata = &p->pdata;
+
+	sh_keysc_write(p, KYOUTDR, 0);
+	sh_keysc_write(p, KYCR2, KYCR2_IRQ_LEVEL | (keys_set << 8));
+
+	if (pdata->kycr2_delay)
+		udelay(pdata->kycr2_delay);
+}
+
+static void sh_keysc_map_dbg(struct device *dev, unsigned long *map,
+			     const char *str)
+{
+	int k;
+
+	for (k = 0; k < BITS_TO_LONGS(SH_KEYSC_MAXKEYS); k++)
+		dev_dbg(dev, "%s[%d] 0x%lx\n", str, k, map[k]);
+}
+
 static irqreturn_t sh_keysc_isr(int irq, void *dev_id)
 {
 	struct platform_device *pdev = dev_id;
 	struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
 	struct sh_keysc_info *pdata = &priv->pdata;
-	unsigned long keys, keys1, keys0, mask;
+	int keyout_nr = sh_keysc_mode[pdata->mode].keyout;
+	int keyin_nr = sh_keysc_mode[pdata->mode].keyin;
+	DECLARE_BITMAP(keys, SH_KEYSC_MAXKEYS);
+	DECLARE_BITMAP(keys0, SH_KEYSC_MAXKEYS);
+	DECLARE_BITMAP(keys1, SH_KEYSC_MAXKEYS);
 	unsigned char keyin_set, tmp;
-	int i, k;
+	int i, k, n;
 
 	dev_dbg(&pdev->dev, "isr!\n");
 
-	keys1 = ~0;
-	keys0 = 0;
+	bitmap_fill(keys1, SH_KEYSC_MAXKEYS);
+	bitmap_zero(keys0, SH_KEYSC_MAXKEYS);
 
 	do {
-		keys = 0;
+		bitmap_zero(keys, SH_KEYSC_MAXKEYS);
 		keyin_set = 0;
 
-		iowrite16(KYCR2_IRQ_DISABLED, priv->iomem_base + KYCR2_OFFS);
+		sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
+
+		for (i = 0; i < keyout_nr; i++) {
+			n = keyin_nr * i;
 
-		for (i = 0; i < sh_keysc_mode[pdata->mode].keyout; i++) {
-			iowrite16(0xfff ^ (3 << (i * 2)),
-				  priv->iomem_base + KYOUTDR_OFFS);
+			/* drive one KEYOUT pin low, read KEYIN pins */
+			sh_keysc_write(priv, KYOUTDR, 0xffff ^ (3 << (i * 2)));
 			udelay(pdata->delay);
-			tmp = ioread16(priv->iomem_base + KYINDR_OFFS);
-			keys |= tmp << (sh_keysc_mode[pdata->mode].keyin * i);
-			tmp ^= (1 << sh_keysc_mode[pdata->mode].keyin) - 1;
-			keyin_set |= tmp;
-		}
+			tmp = sh_keysc_read(priv, KYINDR);
 
-		iowrite16(0, priv->iomem_base + KYOUTDR_OFFS);
-		iowrite16(KYCR2_IRQ_LEVEL | (keyin_set << 8),
-			  priv->iomem_base + KYCR2_OFFS);
+			/* set bit if key press has been detected */
+			for (k = 0; k < keyin_nr; k++) {
+				if (tmp & (1 << k))
+					__set_bit(n + k, keys);
+			}
 
-		if (pdata->kycr2_delay)
-			udelay(pdata->kycr2_delay);
+			/* keep track of which KEYIN bits that have been set */
+			keyin_set |= tmp ^ ((1 << keyin_nr) - 1);
+		}
 
-		keys ^= ~0;
-		keys &= (1 << (sh_keysc_mode[pdata->mode].keyin *
-			       sh_keysc_mode[pdata->mode].keyout)) - 1;
-		keys1 &= keys;
-		keys0 |= keys;
+		sh_keysc_level_mode(priv, keyin_set);
 
-		dev_dbg(&pdev->dev, "keys 0x%08lx\n", keys);
+		bitmap_complement(keys, keys, SH_KEYSC_MAXKEYS);
+		bitmap_and(keys1, keys1, keys, SH_KEYSC_MAXKEYS);
+		bitmap_or(keys0, keys0, keys, SH_KEYSC_MAXKEYS);
 
-	} while (ioread16(priv->iomem_base + KYCR2_OFFS) & 0x01);
+		sh_keysc_map_dbg(&pdev->dev, keys, "keys");
 
-	dev_dbg(&pdev->dev, "last_keys 0x%08lx keys0 0x%08lx keys1 0x%08lx\n",
-		priv->last_keys, keys0, keys1);
+	} while (sh_keysc_read(priv, KYCR2) & 0x01);
+
+	sh_keysc_map_dbg(&pdev->dev, priv->last_keys, "last_keys");
+	sh_keysc_map_dbg(&pdev->dev, keys0, "keys0");
+	sh_keysc_map_dbg(&pdev->dev, keys1, "keys1");
 
 	for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
 		k = pdata->keycodes[i];
 		if (!k)
 			continue;
 
-		mask = 1 << i;
-
-		if (!((priv->last_keys ^ keys0) & mask))
+		if (test_bit(i, keys0) == test_bit(i, priv->last_keys))
 			continue;
 
-		if ((keys1 | keys0) & mask) {
+		if (test_bit(i, keys1) || test_bit(i, keys0)) {
 			input_event(priv->input, EV_KEY, k, 1);
-			priv->last_keys |= mask;
+			__set_bit(i, priv->last_keys);
 		}
 
-		if (!(keys1 & mask)) {
+		if (!test_bit(i, keys1)) {
 			input_event(priv->input, EV_KEY, k, 0);
-			priv->last_keys &= ~mask;
+			__clear_bit(i, priv->last_keys);
 		}
 
 	}
@@ -122,8 +162,6 @@ static irqreturn_t sh_keysc_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-#define res_size(res) ((res)->end - (res)->start + 1)
-
 static int __devinit sh_keysc_probe(struct platform_device *pdev)
 {
 	struct sh_keysc_priv *priv;
@@ -164,7 +202,7 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
 	memcpy(&priv->pdata, pdev->dev.platform_data, sizeof(priv->pdata));
 	pdata = &priv->pdata;
 
-	priv->iomem_base = ioremap_nocache(res->start, res_size(res));
+	priv->iomem_base = ioremap_nocache(res->start, resource_size(res));
 	if (priv->iomem_base == NULL) {
 		dev_err(&pdev->dev, "failed to remap I/O memory\n");
 		error = -ENXIO;
@@ -220,10 +258,9 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev)
 
 	clk_enable(priv->clk);
 
-	iowrite16((sh_keysc_mode[pdata->mode].kymd << 8) |
-		  pdata->scan_timing, priv->iomem_base + KYCR1_OFFS);
-	iowrite16(0, priv->iomem_base + KYOUTDR_OFFS);
-	iowrite16(KYCR2_IRQ_LEVEL, priv->iomem_base + KYCR2_OFFS);
+	sh_keysc_write(priv, KYCR1, (sh_keysc_mode[pdata->mode].kymd << 8) |
+		       pdata->scan_timing);
+	sh_keysc_level_mode(priv, 0);
 
 	device_init_wakeup(&pdev->dev, 1);
 
@@ -248,7 +285,7 @@ static int __devexit sh_keysc_remove(struct platform_device *pdev)
 {
 	struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
 
-	iowrite16(KYCR2_IRQ_DISABLED, priv->iomem_base + KYCR2_OFFS);
+	sh_keysc_write(priv, KYCR2, KYCR2_IRQ_DISABLED);
 
 	input_unregister_device(priv->input);
 	free_irq(platform_get_irq(pdev, 0), pdev);
@@ -270,7 +307,7 @@ static int sh_keysc_suspend(struct device *dev)
 	int irq = platform_get_irq(pdev, 0);
 	unsigned short value;
 
-	value = ioread16(priv->iomem_base + KYCR1_OFFS);
+	value = sh_keysc_read(priv, KYCR1);
 
 	if (device_may_wakeup(dev)) {
 		value |= 0x80;
@@ -279,7 +316,7 @@ static int sh_keysc_suspend(struct device *dev)
 		value &= ~0x80;
 	}
 
-	iowrite16(value, priv->iomem_base + KYCR1_OFFS);
+	sh_keysc_write(priv, KYCR1, value);
 
 	return 0;
 }
diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c
index 71b82434264d..a8d2b8db4e35 100644
--- a/drivers/input/misc/apanel.c
+++ b/drivers/input/misc/apanel.c
@@ -149,7 +149,7 @@ static void apanel_shutdown(struct i2c_client *client)
 	apanel_remove(client);
 }
 
-static struct i2c_device_id apanel_id[] = {
+static const struct i2c_device_id apanel_id[] = {
 	{ "fujitsu_apanel", 0 },
 	{ }
 };
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
index 3b9f588fc747..4ae07935985e 100644
--- a/drivers/input/misc/rotary_encoder.c
+++ b/drivers/input/misc/rotary_encoder.c
@@ -152,6 +152,13 @@ static int __devinit rotary_encoder_probe(struct platform_device *pdev)
 		goto exit_unregister_input;
 	}
 
+	err = gpio_direction_input(pdata->gpio_a);
+	if (err) {
+		dev_err(&pdev->dev, "unable to set GPIO %d for input\n",
+			pdata->gpio_a);
+		goto exit_unregister_input;
+	}
+
 	err = gpio_request(pdata->gpio_b, DRV_NAME);
 	if (err) {
 		dev_err(&pdev->dev, "unable to request GPIO %d\n",
@@ -159,6 +166,13 @@ static int __devinit rotary_encoder_probe(struct platform_device *pdev)
 		goto exit_free_gpio_a;
 	}
 
+	err = gpio_direction_input(pdata->gpio_b);
+	if (err) {
+		dev_err(&pdev->dev, "unable to set GPIO %d for input\n",
+			pdata->gpio_b);
+		goto exit_free_gpio_a;
+	}
+
 	/* request the IRQs */
 	err = request_irq(encoder->irq_a, &rotary_encoder_irq,
 			  IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index d3f57245420a..1477466076ad 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -34,7 +34,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <linux/fs.h>
 #include <linux/miscdevice.h>
 #include <linux/uinput.h>
@@ -284,7 +283,6 @@ static int uinput_open(struct inode *inode, struct file *file)
 	if (!newdev)
 		return -ENOMEM;
 
-	lock_kernel();
 	mutex_init(&newdev->mutex);
 	spin_lock_init(&newdev->requests_lock);
 	init_waitqueue_head(&newdev->requests_waitq);
@@ -292,7 +290,7 @@ static int uinput_open(struct inode *inode, struct file *file)
 	newdev->state = UIST_NEW_DEVICE;
 
 	file->private_data = newdev;
-	unlock_kernel();
+	nonseekable_open(inode, file);
 
 	return 0;
 }
diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c
index c8f5a9a3fa14..cbec3dfdd42b 100644
--- a/drivers/input/misc/winbond-cir.c
+++ b/drivers/input/misc/winbond-cir.c
@@ -538,6 +538,7 @@ wbcir_reset_irdata(struct wbcir_data *data)
 	data->irdata_count = 0;
 	data->irdata_off = 0;
 	data->irdata_error = 0;
+	data->idle_count = 0;
 }
 
 /* Adds one bit of irdata */
@@ -1006,7 +1007,6 @@ wbcir_irq_handler(int irqno, void *cookie)
 		}
 
 		wbcir_reset_irdata(data);
-		data->idle_count = 0;
 	}
 
 out:
@@ -1018,7 +1018,7 @@ out:
 
 /*****************************************************************************
  *
- * SUSPEND/RESUME FUNCTIONS
+ * SETUP/INIT/SUSPEND/RESUME FUNCTIONS
  *
  *****************************************************************************/
 
@@ -1197,7 +1197,16 @@ finish:
 	}
 
 	/* Disable interrupts */
+	wbcir_select_bank(data, WBCIR_BANK_0);
 	outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
+
+	/*
+	 * ACPI will set the HW disable bit for SP3 which means that the
+	 * output signals are left in an undefined state which may cause
+	 * spurious interrupts which we need to ignore until the hardware
+	 * is reinitialized.
+	 */
+	disable_irq(data->irq);
 }
 
 static int
@@ -1207,37 +1216,15 @@ wbcir_suspend(struct pnp_dev *device, pm_message_t state)
 	return 0;
 }
 
-static int
-wbcir_resume(struct pnp_dev *device)
-{
-	struct wbcir_data *data = pnp_get_drvdata(device);
-
-	/* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */
-	wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
-
-	/* Clear CEIR_EN */
-	wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
-
-	/* Enable interrupts */
-	wbcir_reset_irdata(data);
-	outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
-
-	return 0;
-}
-
-
-
-/*****************************************************************************
- *
- * SETUP/INIT FUNCTIONS
- *
- *****************************************************************************/
-
 static void
-wbcir_cfg_ceir(struct wbcir_data *data)
+wbcir_init_hw(struct wbcir_data *data)
 {
 	u8 tmp;
 
+	/* Disable interrupts */
+	wbcir_select_bank(data, WBCIR_BANK_0);
+	outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
+
 	/* Set PROT_SEL, RX_INV, Clear CEIR_EN (needed for the led) */
 	tmp = protocol << 4;
 	if (invert)
@@ -1264,6 +1251,93 @@ wbcir_cfg_ceir(struct wbcir_data *data)
 	 * set SP3_IRRX_SW to binary 01, helpfully not documented
 	 */
 	outb(0x10, data->ebase + WBCIR_REG_ECEIR_CTS);
+
+	/* Enable extended mode */
+	wbcir_select_bank(data, WBCIR_BANK_2);
+	outb(WBCIR_EXT_ENABLE, data->sbase + WBCIR_REG_SP3_EXCR1);
+
+	/*
+	 * Configure baud generator, IR data will be sampled at
+	 * a bitrate of: (24Mhz * prescaler) / (divisor * 16).
+	 *
+	 * The ECIR registers include a flag to change the
+	 * 24Mhz clock freq to 48Mhz.
+	 *
+	 * It's not documented in the specs, but fifo levels
+	 * other than 16 seems to be unsupported.
+	 */
+
+	/* prescaler 1.0, tx/rx fifo lvl 16 */
+	outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2);
+
+	/* Set baud divisor to generate one byte per bit/cell */
+	switch (protocol) {
+	case IR_PROTOCOL_RC5:
+		outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL);
+		break;
+	case IR_PROTOCOL_RC6:
+		outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL);
+		break;
+	case IR_PROTOCOL_NEC:
+		outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL);
+		break;
+	}
+	outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
+
+	/* Set CEIR mode */
+	wbcir_select_bank(data, WBCIR_BANK_0);
+	outb(0xC0, data->sbase + WBCIR_REG_SP3_MCR);
+	inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
+	inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
+
+	/* Disable RX demod, run-length encoding/decoding, set freq span */
+	wbcir_select_bank(data, WBCIR_BANK_7);
+	outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG);
+
+	/* Disable timer */
+	wbcir_select_bank(data, WBCIR_BANK_4);
+	outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR1);
+
+	/* Enable MSR interrupt, Clear AUX_IRX */
+	wbcir_select_bank(data, WBCIR_BANK_5);
+	outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR2);
+
+	/* Disable CRC */
+	wbcir_select_bank(data, WBCIR_BANK_6);
+	outb(0x20, data->sbase + WBCIR_REG_SP3_IRCR3);
+
+	/* Set RX/TX (de)modulation freq, not really used */
+	wbcir_select_bank(data, WBCIR_BANK_7);
+	outb(0xF2, data->sbase + WBCIR_REG_SP3_IRRXDC);
+	outb(0x69, data->sbase + WBCIR_REG_SP3_IRTXMC);
+
+	/* Set invert and pin direction */
+	if (invert)
+		outb(0x10, data->sbase + WBCIR_REG_SP3_IRCFG4);
+	else
+		outb(0x00, data->sbase + WBCIR_REG_SP3_IRCFG4);
+
+	/* Set FIFO thresholds (RX = 8, TX = 3), reset RX/TX */
+	wbcir_select_bank(data, WBCIR_BANK_0);
+	outb(0x97, data->sbase + WBCIR_REG_SP3_FCR);
+
+	/* Clear AUX status bits */
+	outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR);
+
+	/* Enable interrupts */
+	wbcir_reset_irdata(data);
+	outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
+}
+
+static int
+wbcir_resume(struct pnp_dev *device)
+{
+	struct wbcir_data *data = pnp_get_drvdata(device);
+
+	wbcir_init_hw(data);
+	enable_irq(data->irq);
+
+	return 0;
 }
 
 static int __devinit
@@ -1393,86 +1467,7 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
 
 	device_init_wakeup(&device->dev, 1);
 
-	wbcir_cfg_ceir(data);
-
-	/* Disable interrupts */
-	wbcir_select_bank(data, WBCIR_BANK_0);
-	outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
-
-	/* Enable extended mode */
-	wbcir_select_bank(data, WBCIR_BANK_2);
-	outb(WBCIR_EXT_ENABLE, data->sbase + WBCIR_REG_SP3_EXCR1);
-
-	/*
-	 * Configure baud generator, IR data will be sampled at
-	 * a bitrate of: (24Mhz * prescaler) / (divisor * 16).
-	 *
-	 * The ECIR registers include a flag to change the
-	 * 24Mhz clock freq to 48Mhz.
-	 *
-	 * It's not documented in the specs, but fifo levels
-	 * other than 16 seems to be unsupported.
-	 */
-
-	/* prescaler 1.0, tx/rx fifo lvl 16 */
-	outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2);
-
-	/* Set baud divisor to generate one byte per bit/cell */
-	switch (protocol) {
-	case IR_PROTOCOL_RC5:
-		outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL);
-		break;
-	case IR_PROTOCOL_RC6:
-		outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL);
-		break;
-	case IR_PROTOCOL_NEC:
-		outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL);
-		break;
-	}
-	outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
-
-	/* Set CEIR mode */
-	wbcir_select_bank(data, WBCIR_BANK_0);
-	outb(0xC0, data->sbase + WBCIR_REG_SP3_MCR);
-	inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
-	inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
-
-	/* Disable RX demod, run-length encoding/decoding, set freq span */
-	wbcir_select_bank(data, WBCIR_BANK_7);
-	outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG);
-
-	/* Disable timer */
-	wbcir_select_bank(data, WBCIR_BANK_4);
-	outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR1);
-
-	/* Enable MSR interrupt, Clear AUX_IRX */
-	wbcir_select_bank(data, WBCIR_BANK_5);
-	outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR2);
-
-	/* Disable CRC */
-	wbcir_select_bank(data, WBCIR_BANK_6);
-	outb(0x20, data->sbase + WBCIR_REG_SP3_IRCR3);
-
-	/* Set RX/TX (de)modulation freq, not really used */
-	wbcir_select_bank(data, WBCIR_BANK_7);
-	outb(0xF2, data->sbase + WBCIR_REG_SP3_IRRXDC);
-	outb(0x69, data->sbase + WBCIR_REG_SP3_IRTXMC);
-
-	/* Set invert and pin direction */
-	if (invert)
-		outb(0x10, data->sbase + WBCIR_REG_SP3_IRCFG4);
-	else
-		outb(0x00, data->sbase + WBCIR_REG_SP3_IRCFG4);
-
-	/* Set FIFO thresholds (RX = 8, TX = 3), reset RX/TX */
-	wbcir_select_bank(data, WBCIR_BANK_0);
-	outb(0x97, data->sbase + WBCIR_REG_SP3_FCR);
-
-	/* Clear AUX status bits */
-	outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR);
-
-	/* Enable interrupts */
-	outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
+	wbcir_init_hw(data);
 
 	return 0;
 
diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c
index 90be30e93556..9169d1591c1f 100644
--- a/drivers/input/mouse/hgpk.c
+++ b/drivers/input/mouse/hgpk.c
@@ -68,10 +68,6 @@ module_param(post_interrupt_delay, int, 0644);
 MODULE_PARM_DESC(post_interrupt_delay,
 	"delay (ms) before recal after recal interrupt detected");
 
-static int autorecal = 1;
-module_param(autorecal, int, 0644);
-MODULE_PARM_DESC(autorecal, "enable recalibration in the driver");
-
 /*
  * When the touchpad gets ultra-sensitive, one can keep their finger 1/2"
  * above the pad and still have it send packets.  This causes a jump cursor
diff --git a/drivers/input/serio/pcips2.c b/drivers/input/serio/pcips2.c
index 1dacbe0d9348..797314be7af2 100644
--- a/drivers/input/serio/pcips2.c
+++ b/drivers/input/serio/pcips2.c
@@ -186,7 +186,7 @@ static void __devexit pcips2_remove(struct pci_dev *dev)
 	pci_disable_device(dev);
 }
 
-static struct pci_device_id pcips2_ids[] = {
+static const struct pci_device_id pcips2_ids[] = {
 	{
 		.vendor		= 0x14f2,	/* MOBILITY */
 		.device		= 0x0123,	/* Keyboard */
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index e0f30186d513..c3b626e9eae7 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -26,6 +26,8 @@
  * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/stddef.h>
 #include <linux/module.h>
 #include <linux/serio.h>
@@ -119,11 +121,10 @@ static int serio_bind_driver(struct serio *serio, struct serio_driver *drv)
 
 		error = device_bind_driver(&serio->dev);
 		if (error) {
-			printk(KERN_WARNING
-				"serio: device_bind_driver() failed "
-				"for %s (%s) and %s, error: %d\n",
-				serio->phys, serio->name,
-				drv->description, error);
+			dev_warn(&serio->dev,
+				 "device_bind_driver() failed for %s (%s) and %s, error: %d\n",
+				 serio->phys, serio->name,
+				 drv->description, error);
 			serio_disconnect_driver(serio);
 			serio->dev.driver = NULL;
 			return error;
@@ -138,9 +139,9 @@ static void serio_find_driver(struct serio *serio)
 
 	error = device_attach(&serio->dev);
 	if (error < 0)
-		printk(KERN_WARNING
-			"serio: device_attach() failed for %s (%s), error: %d\n",
-			serio->phys, serio->name, error);
+		dev_warn(&serio->dev,
+			 "device_attach() failed for %s (%s), error: %d\n",
+			 serio->phys, serio->name, error);
 }
 
 
@@ -194,17 +195,14 @@ static int serio_queue_event(void *object, struct module *owner,
 
 	event = kmalloc(sizeof(struct serio_event), GFP_ATOMIC);
 	if (!event) {
-		printk(KERN_ERR
-			"serio: Not enough memory to queue event %d\n",
-			event_type);
+		pr_err("Not enough memory to queue event %d\n", event_type);
 		retval = -ENOMEM;
 		goto out;
 	}
 
 	if (!try_module_get(owner)) {
-		printk(KERN_WARNING
-			"serio: Can't get module reference, dropping event %d\n",
-			event_type);
+		pr_warning("Can't get module reference, dropping event %d\n",
+			   event_type);
 		kfree(event);
 		retval = -EINVAL;
 		goto out;
@@ -230,14 +228,12 @@ static void serio_free_event(struct serio_event *event)
 
 static void serio_remove_duplicate_events(struct serio_event *event)
 {
-	struct list_head *node, *next;
-	struct serio_event *e;
+	struct serio_event *e, *next;
 	unsigned long flags;
 
 	spin_lock_irqsave(&serio_event_lock, flags);
 
-	list_for_each_safe(node, next, &serio_event_list) {
-		e = list_entry(node, struct serio_event, node);
+	list_for_each_entry_safe(e, next, &serio_event_list, node) {
 		if (event->object == e->object) {
 			/*
 			 * If this event is of different type we should not
@@ -247,7 +243,7 @@ static void serio_remove_duplicate_events(struct serio_event *event)
 			if (event->type != e->type)
 				break;
 
-			list_del_init(node);
+			list_del_init(&e->node);
 			serio_free_event(e);
 		}
 	}
@@ -258,23 +254,18 @@ static void serio_remove_duplicate_events(struct serio_event *event)
 
 static struct serio_event *serio_get_event(void)
 {
-	struct serio_event *event;
-	struct list_head *node;
+	struct serio_event *event = NULL;
 	unsigned long flags;
 
 	spin_lock_irqsave(&serio_event_lock, flags);
 
-	if (list_empty(&serio_event_list)) {
-		spin_unlock_irqrestore(&serio_event_lock, flags);
-		return NULL;
+	if (!list_empty(&serio_event_list)) {
+		event = list_first_entry(&serio_event_list,
+					 struct serio_event, node);
+		list_del_init(&event->node);
 	}
 
-	node = serio_event_list.next;
-	event = list_entry(node, struct serio_event, node);
-	list_del_init(node);
-
 	spin_unlock_irqrestore(&serio_event_lock, flags);
-
 	return event;
 }
 
@@ -287,29 +278,27 @@ static void serio_handle_event(void)
 	while ((event = serio_get_event())) {
 
 		switch (event->type) {
-			case SERIO_REGISTER_PORT:
-				serio_add_port(event->object);
-				break;
 
-			case SERIO_RECONNECT_PORT:
-				serio_reconnect_port(event->object);
-				break;
+		case SERIO_REGISTER_PORT:
+			serio_add_port(event->object);
+			break;
 
-			case SERIO_RESCAN_PORT:
-				serio_disconnect_port(event->object);
-				serio_find_driver(event->object);
-				break;
+		case SERIO_RECONNECT_PORT:
+			serio_reconnect_port(event->object);
+			break;
 
-			case SERIO_RECONNECT_CHAIN:
-				serio_reconnect_chain(event->object);
-				break;
+		case SERIO_RESCAN_PORT:
+			serio_disconnect_port(event->object);
+			serio_find_driver(event->object);
+			break;
 
-			case SERIO_ATTACH_DRIVER:
-				serio_attach_driver(event->object);
-				break;
+		case SERIO_RECONNECT_CHAIN:
+			serio_reconnect_chain(event->object);
+			break;
 
-			default:
-				break;
+		case SERIO_ATTACH_DRIVER:
+			serio_attach_driver(event->object);
+			break;
 		}
 
 		serio_remove_duplicate_events(event);
@@ -325,16 +314,14 @@ static void serio_handle_event(void)
  */
 static void serio_remove_pending_events(void *object)
 {
-	struct list_head *node, *next;
-	struct serio_event *event;
+	struct serio_event *event, *next;
 	unsigned long flags;
 
 	spin_lock_irqsave(&serio_event_lock, flags);
 
-	list_for_each_safe(node, next, &serio_event_list) {
-		event = list_entry(node, struct serio_event, node);
+	list_for_each_entry_safe(event, next, &serio_event_list, node) {
 		if (event->object == object) {
-			list_del_init(node);
+			list_del_init(&event->node);
 			serio_free_event(event);
 		}
 	}
@@ -380,7 +367,6 @@ static int serio_thread(void *nothing)
 			kthread_should_stop() || !list_empty(&serio_event_list));
 	} while (!kthread_should_stop());
 
-	printk(KERN_DEBUG "serio: kseriod exiting\n");
 	return 0;
 }
 
@@ -445,6 +431,11 @@ static struct attribute_group serio_id_attr_group = {
 	.attrs	= serio_device_id_attrs,
 };
 
+static const struct attribute_group *serio_device_attr_groups[] = {
+	&serio_id_attr_group,
+	NULL
+};
+
 static ssize_t serio_rebind_driver(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct serio *serio = to_serio_port(dev);
@@ -532,6 +523,7 @@ static void serio_init_port(struct serio *serio)
 			(long)atomic_inc_return(&serio_no) - 1);
 	serio->dev.bus = &serio_bus;
 	serio->dev.release = serio_release_port;
+	serio->dev.groups = serio_device_attr_groups;
 	if (serio->parent) {
 		serio->dev.parent = &serio->parent->dev;
 		serio->depth = serio->parent->depth + 1;
@@ -555,21 +547,15 @@ static void serio_add_port(struct serio *serio)
 	}
 
 	list_add_tail(&serio->node, &serio_list);
+
 	if (serio->start)
 		serio->start(serio);
+
 	error = device_add(&serio->dev);
 	if (error)
-		printk(KERN_ERR
-			"serio: device_add() failed for %s (%s), error: %d\n",
+		dev_err(&serio->dev,
+			"device_add() failed for %s (%s), error: %d\n",
 			serio->phys, serio->name, error);
-	else {
-		serio->registered = true;
-		error = sysfs_create_group(&serio->dev.kobj, &serio_id_attr_group);
-		if (error)
-			printk(KERN_ERR
-				"serio: sysfs_create_group() failed for %s (%s), error: %d\n",
-				serio->phys, serio->name, error);
-	}
 }
 
 /*
@@ -596,11 +582,8 @@ static void serio_destroy_port(struct serio *serio)
 		serio->parent = NULL;
 	}
 
-	if (serio->registered) {
-		sysfs_remove_group(&serio->dev.kobj, &serio_id_attr_group);
+	if (device_is_registered(&serio->dev))
 		device_del(&serio->dev);
-		serio->registered = false;
-	}
 
 	list_del_init(&serio->node);
 	serio_remove_pending_events(serio);
@@ -798,9 +781,8 @@ static void serio_attach_driver(struct serio_driver *drv)
 
 	error = driver_attach(&drv->driver);
 	if (error)
-		printk(KERN_WARNING
-			"serio: driver_attach() failed for %s with error %d\n",
-			drv->driver.name, error);
+		pr_warning("driver_attach() failed for %s with error %d\n",
+			   drv->driver.name, error);
 }
 
 int __serio_register_driver(struct serio_driver *drv, struct module *owner, const char *mod_name)
@@ -820,8 +802,7 @@ int __serio_register_driver(struct serio_driver *drv, struct module *owner, cons
 
 	error = driver_register(&drv->driver);
 	if (error) {
-		printk(KERN_ERR
-			"serio: driver_register() failed for %s, error: %d\n",
+		pr_err("driver_register() failed for %s, error: %d\n",
 			drv->driver.name, error);
 		return error;
 	}
@@ -987,7 +968,7 @@ irqreturn_t serio_interrupt(struct serio *serio,
 
         if (likely(serio->drv)) {
                 ret = serio->drv->interrupt(serio, data, dfl);
-	} else if (!dfl && serio->registered) {
+	} else if (!dfl && device_is_registered(&serio->dev)) {
 		serio_rescan(serio);
 		ret = IRQ_HANDLED;
 	}
@@ -1018,7 +999,7 @@ static int __init serio_init(void)
 
 	error = bus_register(&serio_bus);
 	if (error) {
-		printk(KERN_ERR "serio: failed to register serio bus, error: %d\n", error);
+		pr_err("Failed to register serio bus, error: %d\n", error);
 		return error;
 	}
 
@@ -1026,7 +1007,7 @@ static int __init serio_init(void)
 	if (IS_ERR(serio_task)) {
 		bus_unregister(&serio_bus);
 		error = PTR_ERR(serio_task);
-		printk(KERN_ERR "serio: Failed to start kseriod, error: %d\n", error);
+		pr_err("Failed to start kseriod, error: %d\n", error);
 		return error;
 	}
 
diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
index ebb22f88c842..8298e1f68234 100644
--- a/drivers/input/serio/xilinx_ps2.c
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -270,7 +270,7 @@ static int __devinit xps2_of_probe(struct of_device *ofdev,
 	drvdata->irq = r_irq.start;
 
 	phys_addr = r_mem.start;
-	remap_size = r_mem.end - r_mem.start + 1;
+	remap_size = resource_size(&r_mem);
 	if (!request_mem_region(phys_addr, remap_size, DRIVER_NAME)) {
 		dev_err(dev, "Couldn't lock memory region at 0x%08llX\n",
 			(unsigned long long)phys_addr);
@@ -344,7 +344,7 @@ static int __devexit xps2_of_remove(struct of_device *of_dev)
 	if (of_address_to_resource(of_dev->node, 0, &r_mem))
 		dev_err(dev, "invalid address\n");
 	else
-		release_mem_region(r_mem.start, r_mem.end - r_mem.start + 1);
+		release_mem_region(r_mem.start, resource_size(&r_mem));
 
 	kfree(drvdata);
 
@@ -354,7 +354,7 @@ static int __devexit xps2_of_remove(struct of_device *of_dev)
 }
 
 /* Match table for of_platform binding */
-static struct of_device_id xps2_of_match[] __devinitdata = {
+static const struct of_device_id xps2_of_match[] __devinitconst = {
 	{ .compatible = "xlnx,xps-ps2-1.00.a", },
 	{ /* end of list */ },
 };
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index 3d32d3f4e486..866a9ee1af1a 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -92,7 +92,7 @@ Scott Hill shill@gtcocalcomp.com
 /* DATA STRUCTURES */
 
 /* Device table */
-static struct usb_device_id gtco_usbid_table [] = {
+static const struct usb_device_id gtco_usbid_table[] = {
 	{ USB_DEVICE(VENDOR_ID_GTCO, PID_400) },
 	{ USB_DEVICE(VENDOR_ID_GTCO, PID_401) },
 	{ USB_DEVICE(VENDOR_ID_GTCO, PID_1000) },
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index 16310f368dab..8fef1b689c69 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -85,6 +85,7 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/init.h>
 #include <linux/usb/input.h>
 #include <asm/unaligned.h>
@@ -120,6 +121,8 @@ struct wacom_combo {
 	struct urb *urb;
 };
 
+extern const struct usb_device_id wacom_ids[];
+
 extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
 extern void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data);
 extern void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data);
@@ -142,7 +145,5 @@ extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wa
 extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
 extern __u16 wacom_le16_to_cpu(unsigned char *data);
 extern __u16 wacom_be16_to_cpu(unsigned char *data);
-extern struct wacom_features *get_wacom_feature(const struct usb_device_id *id);
-extern const struct usb_device_id *get_device_table(void);
 
 #endif
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 072f33b3b2b0..a1770e6feeec 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -211,7 +211,8 @@ void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
 		BIT_MASK(BTN_TOOL_PEN) | BIT_MASK(BTN_STYLUS) |
 		BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2);
-	input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0);
+	input_set_abs_params(input_dev, ABS_DISTANCE,
+			     0, wacom_wac->features.distance_max, 0, 0);
 }
 
 void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
@@ -261,7 +262,8 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 		BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_TOOL_BRUSH) |
 		BIT_MASK(BTN_TOOL_PENCIL) | BIT_MASK(BTN_TOOL_AIRBRUSH) |
 		BIT_MASK(BTN_TOOL_LENS) | BIT_MASK(BTN_STYLUS2);
-	input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0);
+	input_set_abs_params(input_dev, ABS_DISTANCE,
+			     0, wacom_wac->features.distance_max, 0, 0);
 	input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
 	input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
 	input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
@@ -282,17 +284,19 @@ void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 
 void input_dev_tpc(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
-	if (wacom_wac->features->device_type == BTN_TOOL_DOUBLETAP ||
-	    wacom_wac->features->device_type == BTN_TOOL_TRIPLETAP) {
-		input_set_abs_params(input_dev, ABS_RX, 0, wacom_wac->features->x_phy, 0, 0);
-		input_set_abs_params(input_dev, ABS_RY, 0, wacom_wac->features->y_phy, 0, 0);
-		input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP);
+	struct wacom_features *features = &wacom_wac->features;
+
+	if (features->device_type == BTN_TOOL_DOUBLETAP ||
+	    features->device_type == BTN_TOOL_TRIPLETAP) {
+		input_set_abs_params(input_dev, ABS_RX, 0, features->x_phy, 0, 0);
+		input_set_abs_params(input_dev, ABS_RY, 0, features->y_phy, 0, 0);
+		__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
 	}
 }
 
 void input_dev_tpc2fg(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
-	if (wacom_wac->features->device_type == BTN_TOOL_TRIPLETAP) {
+	if (wacom_wac->features.device_type == BTN_TOOL_TRIPLETAP) {
 		input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_TRIPLETAP);
 		input_dev->evbit[0] |= BIT_MASK(EV_MSC);
 		input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
@@ -532,21 +536,38 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	struct wacom_wac *wacom_wac;
 	struct wacom_features *features;
 	struct input_dev *input_dev;
-	int error = -ENOMEM;
+	int error;
+
+	if (!id->driver_info)
+		return -EINVAL;
 
 	wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
 	wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
 	input_dev = input_allocate_device();
-	if (!wacom || !input_dev || !wacom_wac)
+	if (!wacom || !input_dev || !wacom_wac) {
+		error = -ENOMEM;
 		goto fail1;
+	}
 
-	wacom_wac->data = usb_buffer_alloc(dev, WACOM_PKGLEN_MAX, GFP_KERNEL, &wacom->data_dma);
-	if (!wacom_wac->data)
+	wacom_wac->features = *((struct wacom_features *)id->driver_info);
+	features = &wacom_wac->features;
+	if (features->pktlen > WACOM_PKGLEN_MAX) {
+		error = -EINVAL;
 		goto fail1;
+	}
+
+	wacom_wac->data = usb_buffer_alloc(dev, WACOM_PKGLEN_MAX,
+					   GFP_KERNEL, &wacom->data_dma);
+	if (!wacom_wac->data) {
+		error = -ENOMEM;
+		goto fail1;
+	}
 
 	wacom->irq = usb_alloc_urb(0, GFP_KERNEL);
-	if (!wacom->irq)
+	if (!wacom->irq) {
+		error = -ENOMEM;
 		goto fail2;
+	}
 
 	wacom->usbdev = dev;
 	wacom->dev = input_dev;
@@ -555,11 +576,6 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
 	strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
 
-	wacom_wac->features = features = get_wacom_feature(id);
-	BUG_ON(features->pktlen > WACOM_PKGLEN_MAX);
-
-	input_dev->name = wacom_wac->features->name;
-	wacom->wacom_wac = wacom_wac;
 	usb_to_input_id(dev, &input_dev->id);
 
 	input_dev->dev.parent = &intf->dev;
@@ -576,6 +592,19 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	if (error)
 		goto fail2;
 
+	strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name));
+
+	if (features->type == TABLETPC || features->type == TABLETPC2FG) {
+		/* Append the device type to the name */
+		strlcat(wacom_wac->name,
+			features->device_type == BTN_TOOL_PEN ?
+				" Pen" : " Finger",
+			sizeof(wacom_wac->name));
+	}
+
+	input_dev->name = wacom_wac->name;
+	wacom->wacom_wac = wacom_wac;
+
 	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOUCH);
 
@@ -640,7 +669,7 @@ static int wacom_suspend(struct usb_interface *intf, pm_message_t message)
 static int wacom_resume(struct usb_interface *intf)
 {
 	struct wacom *wacom = usb_get_intfdata(intf);
-	struct wacom_features *features = wacom->wacom_wac->features;
+	struct wacom_features *features = &wacom->wacom_wac->features;
 	int rv;
 
 	mutex_lock(&wacom->lock);
@@ -663,6 +692,7 @@ static int wacom_reset_resume(struct usb_interface *intf)
 
 static struct usb_driver wacom_driver = {
 	.name =		"wacom",
+	.id_table =	wacom_ids,
 	.probe =	wacom_probe,
 	.disconnect =	wacom_disconnect,
 	.suspend =	wacom_suspend,
@@ -674,7 +704,7 @@ static struct usb_driver wacom_driver = {
 static int __init wacom_init(void)
 {
 	int result;
-	wacom_driver.id_table = get_device_table();
+
 	result = usb_register(&wacom_driver);
 	if (result == 0)
 		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 1056f149fe31..3d81443e683a 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -55,6 +55,7 @@ static int wacom_penpartner_irq(struct wacom_wac *wacom, void *wcombo)
 
 static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo)
 {
+	struct wacom_features *features = &wacom->features;
 	unsigned char *data = wacom->data;
 	int prox, pressure;
 
@@ -68,9 +69,9 @@ static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo)
 	if (prox) {
 		wacom->id[0] = ERASER_DEVICE_ID;
 		pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
-		if (wacom->features->pressure_max > 255)
+		if (features->pressure_max > 255)
 			pressure = (pressure << 1) | ((data[4] >> 6) & 1);
-		pressure += (wacom->features->pressure_max + 1) / 2;
+		pressure += (features->pressure_max + 1) / 2;
 
 		/*
 		 * if going from out of proximity into proximity select between the eraser
@@ -152,6 +153,7 @@ static int wacom_ptu_irq(struct wacom_wac *wacom, void *wcombo)
 
 static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 {
+	struct wacom_features *features = &wacom->features;
 	unsigned char *data = wacom->data;
 	int x, y, rw;
 	static int penData = 0;
@@ -179,8 +181,7 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 
 			case 2: /* Mouse with wheel */
 				wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04);
-				if (wacom->features->type == WACOM_G4 ||
-						wacom->features->type == WACOM_MO) {
+				if (features->type == WACOM_G4 || features->type == WACOM_MO) {
 					rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
 					wacom_report_rel(wcombo, REL_WHEEL, -rw);
 				} else
@@ -192,8 +193,7 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 				wacom->id[0] = CURSOR_DEVICE_ID;
 				wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
 				wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
-				if (wacom->features->type == WACOM_G4 ||
-						wacom->features->type == WACOM_MO)
+				if (features->type == WACOM_G4 || features->type == WACOM_MO)
 					wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f);
 				else
 					wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
@@ -230,7 +230,7 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 	}
 
 	/* send pad data */
-	switch (wacom->features->type) {
+	switch (features->type) {
 	    case WACOM_G4:
 		if (data[7] & 0xf8) {
 			if (penData) {
@@ -300,11 +300,12 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 
 static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
 {
+	struct wacom_features *features = &wacom->features;
 	unsigned char *data = wacom->data;
 	int idx = 0;
 
 	/* tool number */
-	if (wacom->features->type == INTUOS)
+	if (features->type == INTUOS)
 		idx = data[1] & 0x01;
 
 	/* Enter report */
@@ -402,7 +403,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
 			wacom_report_key(wcombo, BTN_STYLUS2, 0);
 			wacom_report_key(wcombo, BTN_TOUCH, 0);
 			wacom_report_abs(wcombo, ABS_WHEEL, 0);
-			if (wacom->features->type >= INTUOS3S)
+			if (features->type >= INTUOS3S)
 				wacom_report_abs(wcombo, ABS_Z, 0);
 		}
 		wacom_report_key(wcombo, wacom->tool[idx], 0);
@@ -416,13 +417,14 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
 
 static void wacom_intuos_general(struct wacom_wac *wacom, void *wcombo)
 {
+	struct wacom_features *features = &wacom->features;
 	unsigned char *data = wacom->data;
 	unsigned int t;
 
 	/* general pen packet */
 	if ((data[1] & 0xb8) == 0xa0) {
 		t = (data[6] << 2) | ((data[7] >> 6) & 3);
-		if (wacom->features->type >= INTUOS4S && wacom->features->type <= INTUOS4L)
+		if (features->type >= INTUOS4S && features->type <= INTUOS4L)
 			t = (t << 1) | (data[1] & 1);
 		wacom_report_abs(wcombo, ABS_PRESSURE, t);
 		wacom_report_abs(wcombo, ABS_TILT_X,
@@ -446,6 +448,7 @@ static void wacom_intuos_general(struct wacom_wac *wacom, void *wcombo)
 
 static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 {
+	struct wacom_features *features = &wacom->features;
 	unsigned char *data = wacom->data;
 	unsigned int t;
 	int idx = 0, result;
@@ -457,7 +460,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 	}
 
 	/* tool number */
-	if (wacom->features->type == INTUOS)
+	if (features->type == INTUOS)
 		idx = data[1] & 0x01;
 
 	/* pad packets. Works as a second tool and is always in prox */
@@ -466,7 +469,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 		if (wacom->tool[1] != BTN_TOOL_FINGER)
 			wacom->tool[1] = BTN_TOOL_FINGER;
 
-		if (wacom->features->type >= INTUOS4S && wacom->features->type <= INTUOS4L) {
+		if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
 			wacom_report_key(wcombo, BTN_0, (data[2] & 0x01));
 			wacom_report_key(wcombo, BTN_1, (data[3] & 0x01));
 			wacom_report_key(wcombo, BTN_2, (data[3] & 0x02));
@@ -480,7 +483,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 				/* Out of proximity, clear wheel value. */
 				wacom_report_abs(wcombo, ABS_WHEEL, 0);
 			}
-			if (wacom->features->type != INTUOS4S) {
+			if (features->type != INTUOS4S) {
 				wacom_report_key(wcombo, BTN_7, (data[3] & 0x40));
 				wacom_report_key(wcombo, BTN_8, (data[3] & 0x80));
 			}
@@ -528,18 +531,20 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 		return 0;
 
 	/* Only large Intuos support Lense Cursor */
-	if ((wacom->tool[idx] == BTN_TOOL_LENS)
-			&& ((wacom->features->type == INTUOS3)
-			|| (wacom->features->type == INTUOS3S)
-			|| (wacom->features->type == INTUOS4)
-			|| (wacom->features->type == INTUOS4S)))
+	if (wacom->tool[idx] == BTN_TOOL_LENS &&
+	    (features->type == INTUOS3 ||
+	     features->type == INTUOS3S ||
+	     features->type == INTUOS4 ||
+	     features->type == INTUOS4S)) {
+
 		return 0;
+	}
 
 	/* Cintiq doesn't send data when RDY bit isn't set */
-	if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
+	if (features->type == CINTIQ && !(data[1] & 0x40))
                  return 0;
 
-	if (wacom->features->type >= INTUOS3S) {
+	if (features->type >= INTUOS3S) {
 		wacom_report_abs(wcombo, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
 		wacom_report_abs(wcombo, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
 		wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
@@ -557,7 +562,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 
 		if (data[1] & 0x02) {
 			/* Rotation packet */
-			if (wacom->features->type >= INTUOS3S) {
+			if (features->type >= INTUOS3S) {
 				/* I3 marker pen rotation */
 				t = (data[6] << 3) | ((data[7] >> 5) & 7);
 				t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
@@ -570,7 +575,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 					((t - 1) / 2) : -t / 2);
 			}
 
-		} else if (!(data[1] & 0x10) && wacom->features->type < INTUOS3S) {
+		} else if (!(data[1] & 0x10) && features->type < INTUOS3S) {
 			/* 4D mouse packet */
 			wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x01);
 			wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02);
@@ -583,7 +588,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 
 		} else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
 			/* I4 mouse */
-			if (wacom->features->type >= INTUOS4S && wacom->features->type <= INTUOS4L) {
+			if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
 				wacom_report_key(wcombo, BTN_LEFT,   data[6] & 0x01);
 				wacom_report_key(wcombo, BTN_MIDDLE, data[6] & 0x02);
 				wacom_report_key(wcombo, BTN_RIGHT,  data[6] & 0x04);
@@ -604,13 +609,13 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 						 - ((data[8] & 0x02) >> 1));
 
 				/* I3 2D mouse side buttons */
-				if (wacom->features->type >= INTUOS3S && wacom->features->type <= INTUOS3L) {
+				if (features->type >= INTUOS3S && features->type <= INTUOS3L) {
 					wacom_report_key(wcombo, BTN_SIDE,   data[8] & 0x40);
 					wacom_report_key(wcombo, BTN_EXTRA,  data[8] & 0x20);
 				}
 			}
-		} else if ((wacom->features->type < INTUOS3S || wacom->features->type == INTUOS3L ||
-				wacom->features->type == INTUOS4L) &&
+		} else if ((features->type < INTUOS3S || features->type == INTUOS3L ||
+				features->type == INTUOS4L) &&
 			   wacom->tool[idx] == BTN_TOOL_LENS) {
 			/* Lens cursor packets */
 			wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x01);
@@ -718,6 +723,7 @@ static void wacom_tpc_touch_in(struct wacom_wac *wacom, void *wcombo)
 
 static int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
 {
+	struct wacom_features *features = &wacom->features;
 	char *data = wacom->data;
 	int prox = 0, pressure, idx = -1;
 	static int stylusInProx, touchInProx = 1, touchOut;
@@ -791,7 +797,7 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
 			wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
 			pressure = ((data[7] & 0x01) << 8) | data[6];
 			if (pressure < 0)
-				pressure = wacom->features->pressure_max + pressure + 1;
+				pressure = features->pressure_max + pressure + 1;
 			wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
 			wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x05);
 		} else {
@@ -815,7 +821,7 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
 
 int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
 {
-	switch (wacom_wac->features->type) {
+	switch (wacom_wac->features.type) {
 		case PENPARTNER:
 			return wacom_penpartner_irq(wacom_wac, wcombo);
 
@@ -853,7 +859,7 @@ int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
 
 void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
-	switch (wacom_wac->features->type) {
+	switch (wacom_wac->features.type) {
 		case WACOM_MO:
 			input_dev_mo(input_dev, wacom_wac);
 		case WACOM_G4:
@@ -888,7 +894,7 @@ void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_w
 			/* fall through */
 		case TABLETPC:
 			input_dev_tpc(input_dev, wacom_wac);
-			if (wacom_wac->features->device_type != BTN_TOOL_PEN)
+			if (wacom_wac->features.device_type != BTN_TOOL_PEN)
 				break;  /* no need to process stylus stuff */
 
 			/* fall through */
@@ -903,153 +909,201 @@ void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_w
 	return;
 }
 
-static struct wacom_features wacom_features[] = {
-	{ "Wacom Penpartner",     WACOM_PKGLEN_PENPRTN,    5040,  3780,  255,  0, PENPARTNER },
-	{ "Wacom Graphire",       WACOM_PKGLEN_GRAPHIRE,  10206,  7422,  511, 63, GRAPHIRE },
-	{ "Wacom Graphire2 4x5",  WACOM_PKGLEN_GRAPHIRE,  10206,  7422,  511, 63, GRAPHIRE },
-	{ "Wacom Graphire2 5x7",  WACOM_PKGLEN_GRAPHIRE,  13918, 10206,  511, 63, GRAPHIRE },
-	{ "Wacom Graphire3",      WACOM_PKGLEN_GRAPHIRE,  10208,  7424,  511, 63, GRAPHIRE },
-	{ "Wacom Graphire3 6x8",  WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511, 63, GRAPHIRE },
-	{ "Wacom Graphire4 4x5",  WACOM_PKGLEN_GRAPHIRE,  10208,  7424,  511, 63, WACOM_G4 },
-	{ "Wacom Graphire4 6x8",  WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511, 63, WACOM_G4 },
-	{ "Wacom BambooFun 4x5",  WACOM_PKGLEN_BBFUN,     14760,  9225,  511, 63, WACOM_MO },
-	{ "Wacom BambooFun 6x8",  WACOM_PKGLEN_BBFUN,     21648, 13530,  511, 63, WACOM_MO },
-	{ "Wacom Bamboo1 Medium", WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511, 63, GRAPHIRE },
-	{ "Wacom Volito",         WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511, 63, GRAPHIRE },
-	{ "Wacom PenStation2",    WACOM_PKGLEN_GRAPHIRE,   3250,  2320,  255, 63, GRAPHIRE },
-	{ "Wacom Volito2 4x5",    WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511, 63, GRAPHIRE },
-	{ "Wacom Volito2 2x3",    WACOM_PKGLEN_GRAPHIRE,   3248,  2320,  511, 63, GRAPHIRE },
-	{ "Wacom PenPartner2",    WACOM_PKGLEN_GRAPHIRE,   3250,  2320,  511, 63, GRAPHIRE },
-	{ "Wacom Bamboo",         WACOM_PKGLEN_BBFUN,     14760,  9225,  511, 63, WACOM_MO },
-	{ "Wacom Bamboo1",        WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511, 63, GRAPHIRE },
-	{ "Wacom Intuos 4x5",     WACOM_PKGLEN_INTUOS,    12700, 10600, 1023, 31, INTUOS },
-	{ "Wacom Intuos 6x8",     WACOM_PKGLEN_INTUOS,    20320, 16240, 1023, 31, INTUOS },
-	{ "Wacom Intuos 9x12",    WACOM_PKGLEN_INTUOS,    30480, 24060, 1023, 31, INTUOS },
-	{ "Wacom Intuos 12x12",   WACOM_PKGLEN_INTUOS,    30480, 31680, 1023, 31, INTUOS },
-	{ "Wacom Intuos 12x18",   WACOM_PKGLEN_INTUOS,    45720, 31680, 1023, 31, INTUOS },
-	{ "Wacom PL400",          WACOM_PKGLEN_GRAPHIRE,   5408,  4056,  255,  0, PL },
-	{ "Wacom PL500",          WACOM_PKGLEN_GRAPHIRE,   6144,  4608,  255,  0, PL },
-	{ "Wacom PL600",          WACOM_PKGLEN_GRAPHIRE,   6126,  4604,  255,  0, PL },
-	{ "Wacom PL600SX",        WACOM_PKGLEN_GRAPHIRE,   6260,  5016,  255,  0, PL },
-	{ "Wacom PL550",          WACOM_PKGLEN_GRAPHIRE,   6144,  4608,  511,  0, PL },
-	{ "Wacom PL800",          WACOM_PKGLEN_GRAPHIRE,   7220,  5780,  511,  0, PL },
-	{ "Wacom PL700",          WACOM_PKGLEN_GRAPHIRE,   6758,  5406,  511,  0, PL },
-	{ "Wacom PL510",          WACOM_PKGLEN_GRAPHIRE,   6282,  4762,  511,  0, PL },
-	{ "Wacom DTU710",         WACOM_PKGLEN_GRAPHIRE,  34080, 27660,  511,  0, PL },
-	{ "Wacom DTF521",         WACOM_PKGLEN_GRAPHIRE,   6282,  4762,  511,  0, PL },
-	{ "Wacom DTF720",         WACOM_PKGLEN_GRAPHIRE,   6858,  5506,  511,  0, PL },
-	{ "Wacom DTF720a",        WACOM_PKGLEN_GRAPHIRE,   6858,  5506,  511,  0, PL },
-	{ "Wacom Cintiq Partner", WACOM_PKGLEN_GRAPHIRE,  20480, 15360,  511,  0, PTU },
-	{ "Wacom Intuos2 4x5",    WACOM_PKGLEN_INTUOS,    12700, 10600, 1023, 31, INTUOS },
-	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023, 31, INTUOS },
-	{ "Wacom Intuos2 9x12",   WACOM_PKGLEN_INTUOS,    30480, 24060, 1023, 31, INTUOS },
-	{ "Wacom Intuos2 12x12",  WACOM_PKGLEN_INTUOS,    30480, 31680, 1023, 31, INTUOS },
-	{ "Wacom Intuos2 12x18",  WACOM_PKGLEN_INTUOS,    45720, 31680, 1023, 31, INTUOS },
-	{ "Wacom Intuos3 4x5",    WACOM_PKGLEN_INTUOS,    25400, 20320, 1023, 63, INTUOS3S },
-	{ "Wacom Intuos3 6x8",    WACOM_PKGLEN_INTUOS,    40640, 30480, 1023, 63, INTUOS3 },
-	{ "Wacom Intuos3 9x12",   WACOM_PKGLEN_INTUOS,    60960, 45720, 1023, 63, INTUOS3 },
-	{ "Wacom Intuos3 12x12",  WACOM_PKGLEN_INTUOS,    60960, 60960, 1023, 63, INTUOS3L },
-	{ "Wacom Intuos3 12x19",  WACOM_PKGLEN_INTUOS,    97536, 60960, 1023, 63, INTUOS3L },
-	{ "Wacom Intuos3 6x11",   WACOM_PKGLEN_INTUOS,    54204, 31750, 1023, 63, INTUOS3 },
-	{ "Wacom Intuos3 4x6",    WACOM_PKGLEN_INTUOS,    31496, 19685, 1023, 63, INTUOS3S },
-	{ "Wacom Intuos4 4x6",    WACOM_PKGLEN_INTUOS,    31496, 19685, 2047, 63, INTUOS4S },
-	{ "Wacom Intuos4 6x9",    WACOM_PKGLEN_INTUOS,    44704, 27940, 2047, 63, INTUOS4 },
-	{ "Wacom Intuos4 8x13",   WACOM_PKGLEN_INTUOS,    65024, 40640, 2047, 63, INTUOS4L },
-	{ "Wacom Intuos4 12x19",  WACOM_PKGLEN_INTUOS,    97536, 60960, 2047, 63, INTUOS4L },
-	{ "Wacom Cintiq 21UX",    WACOM_PKGLEN_INTUOS,    87200, 65600, 1023, 63, CINTIQ },
-	{ "Wacom Cintiq 20WSX",   WACOM_PKGLEN_INTUOS,    86680, 54180, 1023, 63, WACOM_BEE },
-	{ "Wacom Cintiq 12WX",    WACOM_PKGLEN_INTUOS,    53020, 33440, 1023, 63, WACOM_BEE },
-	{ "Wacom DTU1931",        WACOM_PKGLEN_GRAPHIRE,  37832, 30305,  511,  0, PL },
-	{ "Wacom ISDv4 90",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC },
-	{ "Wacom ISDv4 93",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC },
-	{ "Wacom ISDv4 9A",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC },
-	{ "Wacom ISDv4 9F",       WACOM_PKGLEN_PENABLED,  26202, 16325,  255,  0, TABLETPC },
-	{ "Wacom ISDv4 E2",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,  0, TABLETPC2FG },
-	{ "Wacom ISDv4 E3",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,  0, TABLETPC2FG },
-	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023, 31, INTUOS },
+static const struct wacom_features wacom_features_0x00 =
+	{ "Wacom Penpartner",     WACOM_PKGLEN_PENPRTN,    5040,  3780,  255,  0, PENPARTNER };
+static const struct wacom_features wacom_features_0x10 =
+	{ "Wacom Graphire",       WACOM_PKGLEN_GRAPHIRE,  10206,  7422,  511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x11 =
+	{ "Wacom Graphire2 4x5",  WACOM_PKGLEN_GRAPHIRE,  10206,  7422,  511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x12 =
+	{ "Wacom Graphire2 5x7",  WACOM_PKGLEN_GRAPHIRE,  13918, 10206,  511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x13 =
+	{ "Wacom Graphire3",      WACOM_PKGLEN_GRAPHIRE,  10208,  7424,  511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x14 =
+	{ "Wacom Graphire3 6x8",  WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x15 =
+	{ "Wacom Graphire4 4x5",  WACOM_PKGLEN_GRAPHIRE,  10208,  7424,  511, 63, WACOM_G4 };
+static const struct wacom_features wacom_features_0x16 =
+	{ "Wacom Graphire4 6x8",  WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511, 63, WACOM_G4 };
+static const struct wacom_features wacom_features_0x17 =
+	{ "Wacom BambooFun 4x5",  WACOM_PKGLEN_BBFUN,     14760,  9225,  511, 63, WACOM_MO };
+static const struct wacom_features wacom_features_0x18 =
+	{ "Wacom BambooFun 6x8",  WACOM_PKGLEN_BBFUN,     21648, 13530,  511, 63, WACOM_MO };
+static const struct wacom_features wacom_features_0x19 =
+	{ "Wacom Bamboo1 Medium", WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x60 =
+	{ "Wacom Volito",         WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x61 =
+	{ "Wacom PenStation2",    WACOM_PKGLEN_GRAPHIRE,   3250,  2320,  255, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x62 =
+	{ "Wacom Volito2 4x5",    WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x63 =
+	{ "Wacom Volito2 2x3",    WACOM_PKGLEN_GRAPHIRE,   3248,  2320,  511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x64 =
+	{ "Wacom PenPartner2",    WACOM_PKGLEN_GRAPHIRE,   3250,  2320,  511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x65 =
+	{ "Wacom Bamboo",         WACOM_PKGLEN_BBFUN,     14760,  9225,  511, 63, WACOM_MO };
+static const struct wacom_features wacom_features_0x69 =
+	{ "Wacom Bamboo1",        WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511, 63, GRAPHIRE };
+static const struct wacom_features wacom_features_0x20 =
+	{ "Wacom Intuos 4x5",     WACOM_PKGLEN_INTUOS,    12700, 10600, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x21 =
+	{ "Wacom Intuos 6x8",     WACOM_PKGLEN_INTUOS,    20320, 16240, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x22 =
+	{ "Wacom Intuos 9x12",    WACOM_PKGLEN_INTUOS,    30480, 24060, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x23 =
+	{ "Wacom Intuos 12x12",   WACOM_PKGLEN_INTUOS,    30480, 31680, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x24 =
+	{ "Wacom Intuos 12x18",   WACOM_PKGLEN_INTUOS,    45720, 31680, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x30 =
+	{ "Wacom PL400",          WACOM_PKGLEN_GRAPHIRE,   5408,  4056,  255,  0, PL };
+static const struct wacom_features wacom_features_0x31 =
+	{ "Wacom PL500",          WACOM_PKGLEN_GRAPHIRE,   6144,  4608,  255,  0, PL };
+static const struct wacom_features wacom_features_0x32 =
+	{ "Wacom PL600",          WACOM_PKGLEN_GRAPHIRE,   6126,  4604,  255,  0, PL };
+static const struct wacom_features wacom_features_0x33 =
+	{ "Wacom PL600SX",        WACOM_PKGLEN_GRAPHIRE,   6260,  5016,  255,  0, PL };
+static const struct wacom_features wacom_features_0x34 =
+	{ "Wacom PL550",          WACOM_PKGLEN_GRAPHIRE,   6144,  4608,  511,  0, PL };
+static const struct wacom_features wacom_features_0x35 =
+	{ "Wacom PL800",          WACOM_PKGLEN_GRAPHIRE,   7220,  5780,  511,  0, PL };
+static const struct wacom_features wacom_features_0x37 =
+	{ "Wacom PL700",          WACOM_PKGLEN_GRAPHIRE,   6758,  5406,  511,  0, PL };
+static const struct wacom_features wacom_features_0x38 =
+	{ "Wacom PL510",          WACOM_PKGLEN_GRAPHIRE,   6282,  4762,  511,  0, PL };
+static const struct wacom_features wacom_features_0x39 =
+	{ "Wacom DTU710",         WACOM_PKGLEN_GRAPHIRE,  34080, 27660,  511,  0, PL };
+static const struct wacom_features wacom_features_0xC4 =
+	{ "Wacom DTF521",         WACOM_PKGLEN_GRAPHIRE,   6282,  4762,  511,  0, PL };
+static const struct wacom_features wacom_features_0xC0 =
+	{ "Wacom DTF720",         WACOM_PKGLEN_GRAPHIRE,   6858,  5506,  511,  0, PL };
+static const struct wacom_features wacom_features_0xC2 =
+	{ "Wacom DTF720a",        WACOM_PKGLEN_GRAPHIRE,   6858,  5506,  511,  0, PL };
+static const struct wacom_features wacom_features_0x03 =
+	{ "Wacom Cintiq Partner", WACOM_PKGLEN_GRAPHIRE,  20480, 15360,  511,  0, PTU };
+static const struct wacom_features wacom_features_0x41 =
+	{ "Wacom Intuos2 4x5",    WACOM_PKGLEN_INTUOS,    12700, 10600, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x42 =
+	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x43 =
+	{ "Wacom Intuos2 9x12",   WACOM_PKGLEN_INTUOS,    30480, 24060, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x44 =
+	{ "Wacom Intuos2 12x12",  WACOM_PKGLEN_INTUOS,    30480, 31680, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0x45 =
+	{ "Wacom Intuos2 12x18",  WACOM_PKGLEN_INTUOS,    45720, 31680, 1023, 31, INTUOS };
+static const struct wacom_features wacom_features_0xB0 =
+	{ "Wacom Intuos3 4x5",    WACOM_PKGLEN_INTUOS,    25400, 20320, 1023, 63, INTUOS3S };
+static const struct wacom_features wacom_features_0xB1 =
+	{ "Wacom Intuos3 6x8",    WACOM_PKGLEN_INTUOS,    40640, 30480, 1023, 63, INTUOS3 };
+static const struct wacom_features wacom_features_0xB2 =
+	{ "Wacom Intuos3 9x12",   WACOM_PKGLEN_INTUOS,    60960, 45720, 1023, 63, INTUOS3 };
+static const struct wacom_features wacom_features_0xB3 =
+	{ "Wacom Intuos3 12x12",  WACOM_PKGLEN_INTUOS,    60960, 60960, 1023, 63, INTUOS3L };
+static const struct wacom_features wacom_features_0xB4 =
+	{ "Wacom Intuos3 12x19",  WACOM_PKGLEN_INTUOS,    97536, 60960, 1023, 63, INTUOS3L };
+static const struct wacom_features wacom_features_0xB5 =
+	{ "Wacom Intuos3 6x11",   WACOM_PKGLEN_INTUOS,    54204, 31750, 1023, 63, INTUOS3 };
+static const struct wacom_features wacom_features_0xB7 =
+	{ "Wacom Intuos3 4x6",    WACOM_PKGLEN_INTUOS,    31496, 19685, 1023, 63, INTUOS3S };
+static const struct wacom_features wacom_features_0xB8 =
+	{ "Wacom Intuos4 4x6",    WACOM_PKGLEN_INTUOS,    31496, 19685, 2047, 63, INTUOS4S };
+static const struct wacom_features wacom_features_0xB9 =
+	{ "Wacom Intuos4 6x9",    WACOM_PKGLEN_INTUOS,    44704, 27940, 2047, 63, INTUOS4 };
+static const struct wacom_features wacom_features_0xBA =
+	{ "Wacom Intuos4 8x13",   WACOM_PKGLEN_INTUOS,    65024, 40640, 2047, 63, INTUOS4L };
+static const struct wacom_features wacom_features_0xBB =
+	{ "Wacom Intuos4 12x19",  WACOM_PKGLEN_INTUOS,    97536, 60960, 2047, 63, INTUOS4L };
+static const struct wacom_features wacom_features_0x3F =
+	{ "Wacom Cintiq 21UX",    WACOM_PKGLEN_INTUOS,    87200, 65600, 1023, 63, CINTIQ };
+static const struct wacom_features wacom_features_0xC5 =
+	{ "Wacom Cintiq 20WSX",   WACOM_PKGLEN_INTUOS,    86680, 54180, 1023, 63, WACOM_BEE };
+static const struct wacom_features wacom_features_0xC6 =
+	{ "Wacom Cintiq 12WX",    WACOM_PKGLEN_INTUOS,    53020, 33440, 1023, 63, WACOM_BEE };
+static const struct wacom_features wacom_features_0xC7 =
+	{ "Wacom DTU1931",        WACOM_PKGLEN_GRAPHIRE,  37832, 30305,  511,  0, PL };
+static const struct wacom_features wacom_features_0x90 =
+	{ "Wacom ISDv4 90",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
+static const struct wacom_features wacom_features_0x93 =
+	{ "Wacom ISDv4 93",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
+static const struct wacom_features wacom_features_0x9A =
+	{ "Wacom ISDv4 9A",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,  0, TABLETPC };
+static const struct wacom_features wacom_features_0x9F =
+	{ "Wacom ISDv4 9F",       WACOM_PKGLEN_PENABLED,  26202, 16325,  255,  0, TABLETPC };
+static const struct wacom_features wacom_features_0xE2 =
+	{ "Wacom ISDv4 E2",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,  0, TABLETPC2FG };
+static const struct wacom_features wacom_features_0xE3 =
+	{ "Wacom ISDv4 E3",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,  0, TABLETPC2FG };
+static const struct wacom_features wacom_features_0x47 =
+	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023, 31, INTUOS };
+
+#define USB_DEVICE_WACOM(prod)					\
+	USB_DEVICE(USB_VENDOR_ID_WACOM, prod),			\
+	.driver_info = (kernel_ulong_t)&wacom_features_##prod
+
+const struct usb_device_id wacom_ids[] = {
+	{ USB_DEVICE_WACOM(0x00) },
+	{ USB_DEVICE_WACOM(0x10) },
+	{ USB_DEVICE_WACOM(0x11) },
+	{ USB_DEVICE_WACOM(0x12) },
+	{ USB_DEVICE_WACOM(0x13) },
+	{ USB_DEVICE_WACOM(0x14) },
+	{ USB_DEVICE_WACOM(0x15) },
+	{ USB_DEVICE_WACOM(0x16) },
+	{ USB_DEVICE_WACOM(0x17) },
+	{ USB_DEVICE_WACOM(0x18) },
+	{ USB_DEVICE_WACOM(0x19) },
+	{ USB_DEVICE_WACOM(0x60) },
+	{ USB_DEVICE_WACOM(0x61) },
+	{ USB_DEVICE_WACOM(0x62) },
+	{ USB_DEVICE_WACOM(0x63) },
+	{ USB_DEVICE_WACOM(0x64) },
+	{ USB_DEVICE_WACOM(0x65) },
+	{ USB_DEVICE_WACOM(0x69) },
+	{ USB_DEVICE_WACOM(0x20) },
+	{ USB_DEVICE_WACOM(0x21) },
+	{ USB_DEVICE_WACOM(0x22) },
+	{ USB_DEVICE_WACOM(0x23) },
+	{ USB_DEVICE_WACOM(0x24) },
+	{ USB_DEVICE_WACOM(0x30) },
+	{ USB_DEVICE_WACOM(0x31) },
+	{ USB_DEVICE_WACOM(0x32) },
+	{ USB_DEVICE_WACOM(0x33) },
+	{ USB_DEVICE_WACOM(0x34) },
+	{ USB_DEVICE_WACOM(0x35) },
+	{ USB_DEVICE_WACOM(0x37) },
+	{ USB_DEVICE_WACOM(0x38) },
+	{ USB_DEVICE_WACOM(0x39) },
+	{ USB_DEVICE_WACOM(0xC4) },
+	{ USB_DEVICE_WACOM(0xC0) },
+	{ USB_DEVICE_WACOM(0xC2) },
+	{ USB_DEVICE_WACOM(0x03) },
+	{ USB_DEVICE_WACOM(0x41) },
+	{ USB_DEVICE_WACOM(0x42) },
+	{ USB_DEVICE_WACOM(0x43) },
+	{ USB_DEVICE_WACOM(0x44) },
+	{ USB_DEVICE_WACOM(0x45) },
+	{ USB_DEVICE_WACOM(0xB0) },
+	{ USB_DEVICE_WACOM(0xB1) },
+	{ USB_DEVICE_WACOM(0xB2) },
+	{ USB_DEVICE_WACOM(0xB3) },
+	{ USB_DEVICE_WACOM(0xB4) },
+	{ USB_DEVICE_WACOM(0xB5) },
+	{ USB_DEVICE_WACOM(0xB7) },
+	{ USB_DEVICE_WACOM(0xB8) },
+	{ USB_DEVICE_WACOM(0xB9) },
+	{ USB_DEVICE_WACOM(0xBA) },
+	{ USB_DEVICE_WACOM(0xBB) },
+	{ USB_DEVICE_WACOM(0x3F) },
+	{ USB_DEVICE_WACOM(0xC5) },
+	{ USB_DEVICE_WACOM(0xC6) },
+	{ USB_DEVICE_WACOM(0xC7) },
+	{ USB_DEVICE_WACOM(0x90) },
+	{ USB_DEVICE_WACOM(0x93) },
+	{ USB_DEVICE_WACOM(0x9A) },
+	{ USB_DEVICE_WACOM(0x9F) },
+	{ USB_DEVICE_WACOM(0xE2) },
+	{ USB_DEVICE_WACOM(0xE3) },
+	{ USB_DEVICE_WACOM(0x47) },
 	{ }
 };
-
-static struct usb_device_id wacom_ids[] = {
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x00) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x10) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x11) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x19) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x65) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x69) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x23) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x24) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x30) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x31) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x32) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC2) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB3) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB4) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB7) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB8) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB9) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xBA) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xBB) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC7) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x90) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x93) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9A) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9F) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xE2) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xE3) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
-	{ }
-};
-
-const struct usb_device_id *get_device_table(void)
-{
-        const struct usb_device_id *id_table = wacom_ids;
-
-        return id_table;
-}
-
-struct wacom_features * get_wacom_feature(const struct usb_device_id *id)
-{
-        int index = id - wacom_ids;
-        struct wacom_features *wf = &wacom_features[index];
-
-        return wf;
-}
-
 MODULE_DEVICE_TABLE(usb, wacom_ids);
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index ee01e1902785..8590b1e8ec37 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -15,11 +15,11 @@
 /* packet length for individual models */
 #define WACOM_PKGLEN_PENPRTN	 7
 #define WACOM_PKGLEN_GRAPHIRE	 8
-#define WACOM_PKGLEN_BBFUN 	 9
-#define WACOM_PKGLEN_INTUOS 	10
+#define WACOM_PKGLEN_BBFUN	 9
+#define WACOM_PKGLEN_INTUOS	10
 #define WACOM_PKGLEN_PENABLED	 8
 #define WACOM_PKGLEN_TPC1FG	 5
-#define WACOM_PKGLEN_TPC2FG 	14
+#define WACOM_PKGLEN_TPC2FG	14
 
 /* device IDs */
 #define STYLUS_DEVICE_ID	0x02
@@ -58,7 +58,7 @@ enum {
 };
 
 struct wacom_features {
-	char *name;
+	const char *name;
 	int pktlen;
 	int x_max;
 	int y_max;
@@ -73,11 +73,12 @@ struct wacom_features {
 };
 
 struct wacom_wac {
+	char name[64];
 	unsigned char *data;
-        int tool[2];
-        int id[2];
-        __u32 serial[2];
-	struct wacom_features *features;
+	int tool[2];
+	int id[2];
+	__u32 serial[2];
+	struct wacom_features features;
 };
 
 #endif
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index dfafc76da4fb..6457e060ae49 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -90,7 +90,6 @@ config TOUCHSCREEN_CORGI
 	tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
 	depends on PXA_SHARPSL
 	select CORGI_SSP_DEPRECATED
-	default y
 	help
 	  Say Y here to enable the driver for the touchscreen on the
 	  Sharp SL-C7xx and SL-Cxx00 series of PDAs.
@@ -537,6 +536,11 @@ config TOUCHSCREEN_USB_ETT_TC5UH
 	bool "ET&T TC5UH touchscreen controler support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
+config TOUCHSCREEN_USB_NEXIO
+	default y
+	bool "NEXIO/iNexio device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
 config TOUCHSCREEN_TOUCHIT213
 	tristate "Sahara TouchIT-213 touchscreen"
 	select SERIO
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 52d2ca147d8f..8b05d8e97543 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -27,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/regulator/consumer.h>
 #include <asm/irq.h>
 
 /*
@@ -85,6 +86,7 @@ struct ads7846 {
 	char			name[32];
 
 	struct spi_device	*spi;
+	struct regulator	*reg;
 
 #if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
 	struct attribute_group	*attr_group;
@@ -788,6 +790,8 @@ static void ads7846_disable(struct ads7846 *ts)
 		}
 	}
 
+	regulator_disable(ts->reg);
+
 	/* we know the chip's in lowpower mode since we always
 	 * leave it that way after every request
 	 */
@@ -799,6 +803,8 @@ static void ads7846_enable(struct ads7846 *ts)
 	if (!ts->disabled)
 		return;
 
+	regulator_enable(ts->reg);
+
 	ts->disabled = 0;
 	ts->irq_disabled = 0;
 	enable_irq(ts->spi->irq);
@@ -1139,6 +1145,19 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
 	ts->last_msg = m;
 
+	ts->reg = regulator_get(&spi->dev, "vcc");
+	if (IS_ERR(ts->reg)) {
+		dev_err(&spi->dev, "unable to get regulator: %ld\n",
+			PTR_ERR(ts->reg));
+		goto err_free_gpio;
+	}
+
+	err = regulator_enable(ts->reg);
+	if (err) {
+		dev_err(&spi->dev, "unable to enable regulator: %d\n", err);
+		goto err_put_regulator;
+	}
+
 	if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING,
 			spi->dev.driver->name, ts)) {
 		dev_info(&spi->dev,
@@ -1148,7 +1167,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 				  spi->dev.driver->name, ts);
 		if (err) {
 			dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
-			goto err_free_gpio;
+			goto err_disable_regulator;
 		}
 	}
 
@@ -1180,6 +1199,10 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	ads784x_hwmon_unregister(spi, ts);
  err_free_irq:
 	free_irq(spi->irq, ts);
+ err_disable_regulator:
+	regulator_disable(ts->reg);
+ err_put_regulator:
+	regulator_put(ts->reg);
  err_free_gpio:
 	if (ts->gpio_pendown != -1)
 		gpio_free(ts->gpio_pendown);
@@ -1208,6 +1231,9 @@ static int __devexit ads7846_remove(struct spi_device *spi)
 	/* suspend left the IRQ disabled */
 	enable_irq(ts->spi->irq);
 
+	regulator_disable(ts->reg);
+	regulator_put(ts->reg);
+
 	if (ts->gpio_pendown != -1)
 		gpio_free(ts->gpio_pendown);
 
diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
index 8f38c5e55ce6..486d31ba9c09 100644
--- a/drivers/input/touchscreen/elo.c
+++ b/drivers/input/touchscreen/elo.c
@@ -72,45 +72,49 @@ static void elo_process_data_10(struct elo *elo, unsigned char data)
 	struct input_dev *dev = elo->dev;
 
 	elo->data[elo->idx] = data;
-	switch (elo->idx++) {
-		case 0:
-			elo->csum = 0xaa;
-			if (data != ELO10_LEAD_BYTE) {
-				pr_debug("elo: unsynchronized data: 0x%02x\n", data);
-				elo->idx = 0;
-			}
-			break;
 
-		case 9:
+	switch (elo->idx++) {
+	case 0:
+		elo->csum = 0xaa;
+		if (data != ELO10_LEAD_BYTE) {
+			dev_dbg(&elo->serio->dev,
+				"unsynchronized data: 0x%02x\n", data);
 			elo->idx = 0;
-			if (data != elo->csum) {
-				pr_debug("elo: bad checksum: 0x%02x, expected 0x%02x\n",
-					 data, elo->csum);
-				break;
-			}
-			if (elo->data[1] != elo->expected_packet) {
-				if (elo->data[1] != ELO10_TOUCH_PACKET)
-					pr_debug("elo: unexpected packet: 0x%02x\n",
-						 elo->data[1]);
-				break;
-			}
-			if (likely(elo->data[1] == ELO10_TOUCH_PACKET)) {
-				input_report_abs(dev, ABS_X, (elo->data[4] << 8) | elo->data[3]);
-				input_report_abs(dev, ABS_Y, (elo->data[6] << 8) | elo->data[5]);
-				if (elo->data[2] & ELO10_PRESSURE)
-					input_report_abs(dev, ABS_PRESSURE,
-							(elo->data[8] << 8) | elo->data[7]);
-				input_report_key(dev, BTN_TOUCH, elo->data[2] & ELO10_TOUCH);
-				input_sync(dev);
-			} else if (elo->data[1] == ELO10_ACK_PACKET) {
-				if (elo->data[2] == '0')
-					elo->expected_packet = ELO10_TOUCH_PACKET;
-				complete(&elo->cmd_done);
-			} else {
-				memcpy(elo->response, &elo->data[1], ELO10_PACKET_LEN);
-				elo->expected_packet = ELO10_ACK_PACKET;
-			}
+		}
+		break;
+
+	case 9:
+		elo->idx = 0;
+		if (data != elo->csum) {
+			dev_dbg(&elo->serio->dev,
+				"bad checksum: 0x%02x, expected 0x%02x\n",
+				 data, elo->csum);
+			break;
+		}
+		if (elo->data[1] != elo->expected_packet) {
+			if (elo->data[1] != ELO10_TOUCH_PACKET)
+				dev_dbg(&elo->serio->dev,
+					"unexpected packet: 0x%02x\n",
+					 elo->data[1]);
 			break;
+		}
+		if (likely(elo->data[1] == ELO10_TOUCH_PACKET)) {
+			input_report_abs(dev, ABS_X, (elo->data[4] << 8) | elo->data[3]);
+			input_report_abs(dev, ABS_Y, (elo->data[6] << 8) | elo->data[5]);
+			if (elo->data[2] & ELO10_PRESSURE)
+				input_report_abs(dev, ABS_PRESSURE,
+						(elo->data[8] << 8) | elo->data[7]);
+			input_report_key(dev, BTN_TOUCH, elo->data[2] & ELO10_TOUCH);
+			input_sync(dev);
+		} else if (elo->data[1] == ELO10_ACK_PACKET) {
+			if (elo->data[2] == '0')
+				elo->expected_packet = ELO10_TOUCH_PACKET;
+			complete(&elo->cmd_done);
+		} else {
+			memcpy(elo->response, &elo->data[1], ELO10_PACKET_LEN);
+			elo->expected_packet = ELO10_ACK_PACKET;
+		}
+		break;
 	}
 	elo->csum += data;
 }
@@ -123,42 +127,53 @@ static void elo_process_data_6(struct elo *elo, unsigned char data)
 
 	switch (elo->idx++) {
 
-		case 0: if ((data & 0xc0) != 0xc0) elo->idx = 0; break;
-		case 1: if ((data & 0xc0) != 0x80) elo->idx = 0; break;
-		case 2: if ((data & 0xc0) != 0x40) elo->idx = 0; break;
-
-		case 3:
-			if (data & 0xc0) {
-				elo->idx = 0;
-				break;
-			}
+	case 0:
+		if ((data & 0xc0) != 0xc0)
+			elo->idx = 0;
+		break;
 
-			input_report_abs(dev, ABS_X, ((elo->data[0] & 0x3f) << 6) | (elo->data[1] & 0x3f));
-			input_report_abs(dev, ABS_Y, ((elo->data[2] & 0x3f) << 6) | (elo->data[3] & 0x3f));
+	case 1:
+		if ((data & 0xc0) != 0x80)
+			elo->idx = 0;
+		break;
 
-			if (elo->id == 2) {
-				input_report_key(dev, BTN_TOUCH, 1);
-				input_sync(dev);
-				elo->idx = 0;
-			}
+	case 2:
+		if ((data & 0xc0) != 0x40)
+			elo->idx = 0;
+		break;
 
+	case 3:
+		if (data & 0xc0) {
+			elo->idx = 0;
 			break;
+		}
 
-		case 4:
-			if (data) {
-				input_sync(dev);
-				elo->idx = 0;
-			}
-			break;
+		input_report_abs(dev, ABS_X, ((elo->data[0] & 0x3f) << 6) | (elo->data[1] & 0x3f));
+		input_report_abs(dev, ABS_Y, ((elo->data[2] & 0x3f) << 6) | (elo->data[3] & 0x3f));
 
-		case 5:
-			if ((data & 0xf0) == 0) {
-				input_report_abs(dev, ABS_PRESSURE, elo->data[5]);
-				input_report_key(dev, BTN_TOUCH, !!elo->data[5]);
-			}
+		if (elo->id == 2) {
+			input_report_key(dev, BTN_TOUCH, 1);
 			input_sync(dev);
 			elo->idx = 0;
-			break;
+		}
+
+		break;
+
+	case 4:
+		if (data) {
+			input_sync(dev);
+			elo->idx = 0;
+		}
+		break;
+
+	case 5:
+		if ((data & 0xf0) == 0) {
+			input_report_abs(dev, ABS_PRESSURE, elo->data[5]);
+			input_report_key(dev, BTN_TOUCH, !!elo->data[5]);
+		}
+		input_sync(dev);
+		elo->idx = 0;
+		break;
 	}
 }
 
@@ -170,17 +185,17 @@ static void elo_process_data_3(struct elo *elo, unsigned char data)
 
 	switch (elo->idx++) {
 
-		case 0:
-			if ((data & 0x7f) != 0x01)
-				elo->idx = 0;
-			break;
-		case 2:
-			input_report_key(dev, BTN_TOUCH, !(elo->data[1] & 0x80));
-			input_report_abs(dev, ABS_X, elo->data[1]);
-			input_report_abs(dev, ABS_Y, elo->data[2]);
-			input_sync(dev);
+	case 0:
+		if ((data & 0x7f) != 0x01)
 			elo->idx = 0;
-			break;
+		break;
+	case 2:
+		input_report_key(dev, BTN_TOUCH, !(elo->data[1] & 0x80));
+		input_report_abs(dev, ABS_X, elo->data[1]);
+		input_report_abs(dev, ABS_Y, elo->data[2]);
+		input_sync(dev);
+		elo->idx = 0;
+		break;
 	}
 }
 
@@ -189,19 +204,19 @@ static irqreturn_t elo_interrupt(struct serio *serio,
 {
 	struct elo *elo = serio_get_drvdata(serio);
 
-	switch(elo->id) {
-		case 0:
-			elo_process_data_10(elo, data);
-			break;
-
-		case 1:
-		case 2:
-			elo_process_data_6(elo, data);
-			break;
-
-		case 3:
-			elo_process_data_3(elo, data);
-			break;
+	switch (elo->id) {
+	case 0:
+		elo_process_data_10(elo, data);
+		break;
+
+	case 1:
+	case 2:
+		elo_process_data_6(elo, data);
+		break;
+
+	case 3:
+		elo_process_data_3(elo, data);
+		break;
 	}
 
 	return IRQ_HANDLED;
@@ -261,10 +276,10 @@ static int elo_setup_10(struct elo *elo)
 	if (packet[3] & ELO10_PRESSURE)
 		input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
 
-	printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, "
-		"features: 0x%02x, controller: 0x%02x\n",
-		elo_types[(packet[1] -'0') & 0x03],
-		packet[5], packet[4], packet[3], packet[7]);
+	dev_info(&elo->serio->dev,
+		 "%sTouch touchscreen, fw: %02x.%02x, features: 0x%02x, controller: 0x%02x\n",
+		 elo_types[(packet[1] -'0') & 0x03],
+		 packet[5], packet[4], packet[3], packet[7]);
 
 	return 0;
 }
@@ -330,24 +345,24 @@ static int elo_connect(struct serio *serio, struct serio_driver *drv)
 
 	switch (elo->id) {
 
-		case 0: /* 10-byte protocol */
-			if (elo_setup_10(elo))
-				goto fail3;
+	case 0: /* 10-byte protocol */
+		if (elo_setup_10(elo))
+			goto fail3;
 
-			break;
+		break;
 
-		case 1: /* 6-byte protocol */
-			input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15, 0, 0);
+	case 1: /* 6-byte protocol */
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15, 0, 0);
 
-		case 2: /* 4-byte protocol */
-			input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0);
-			input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0);
-			break;
+	case 2: /* 4-byte protocol */
+		input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0);
+		input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0);
+		break;
 
-		case 3: /* 3-byte protocol */
-			input_set_abs_params(input_dev, ABS_X, 0, 255, 0, 0);
-			input_set_abs_params(input_dev, ABS_Y, 0, 255, 0, 0);
-			break;
+	case 3: /* 3-byte protocol */
+		input_set_abs_params(input_dev, ABS_X, 0, 255, 0, 0);
+		input_set_abs_params(input_dev, ABS_Y, 0, 255, 0, 0);
+		break;
 	}
 
 	err = input_register_device(elo->dev);
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index 6cdcf2a6e036..b6b8b1c7ecea 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -153,6 +153,9 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm)
 		if (pressure)
 			p = MODR;
 
+		dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n",
+			x, y, p);
+
 		/* are samples valid */
 		if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X ||
 		    (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y ||
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index 6386b441ef85..3755a47d053c 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -128,27 +128,29 @@ static void touch_timer_fire(unsigned long data)
 
 	down = get_down(data0, data1);
 
-	if (ts.count == (1 << ts.shift)) {
-		ts.xp >>= ts.shift;
-		ts.yp >>= ts.shift;
+	if (down) {
+		if (ts.count == (1 << ts.shift)) {
+			ts.xp >>= ts.shift;
+			ts.yp >>= ts.shift;
 
-		dev_dbg(ts.dev, "%s: X=%lu, Y=%lu, count=%d\n",
-			__func__, ts.xp, ts.yp, ts.count);
+			dev_dbg(ts.dev, "%s: X=%lu, Y=%lu, count=%d\n",
+				__func__, ts.xp, ts.yp, ts.count);
 
-		input_report_abs(ts.input, ABS_X, ts.xp);
-		input_report_abs(ts.input, ABS_Y, ts.yp);
+			input_report_abs(ts.input, ABS_X, ts.xp);
+			input_report_abs(ts.input, ABS_Y, ts.yp);
 
-		input_report_key(ts.input, BTN_TOUCH, 1);
-		input_sync(ts.input);
+			input_report_key(ts.input, BTN_TOUCH, 1);
+			input_sync(ts.input);
 
-		ts.xp = 0;
-		ts.yp = 0;
-		ts.count = 0;
-	}
+			ts.xp = 0;
+			ts.yp = 0;
+			ts.count = 0;
+		}
 
-	if (down) {
 		s3c_adc_start(ts.client, 0, 1 << ts.shift);
 	} else {
+		ts.xp = 0;
+		ts.yp = 0;
 		ts.count = 0;
 
 		input_report_key(ts.input, BTN_TOUCH, 0);
@@ -401,6 +403,7 @@ static int s3c2410ts_resume(struct device *dev)
 	struct s3c2410_ts_mach_info *info = pdev->dev.platform_data;
 
 	clk_enable(ts.clock);
+	enable_irq(ts.irq_tc);
 
 	/* Initialise registers */
 	if ((info->delay & 0xffff) > 0)
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 7ef0d1420d3c..be23780e8a3e 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -358,7 +358,7 @@ static int __devexit tsc2007_remove(struct i2c_client *client)
 	return 0;
 }
 
-static struct i2c_device_id tsc2007_idtable[] = {
+static const struct i2c_device_id tsc2007_idtable[] = {
 	{ "tsc2007", 0 },
 	{ }
 };
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 5256123a5228..99330bbdbac7 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -15,6 +15,7 @@
  *  - GoTop Super_Q2/GogoPen/PenPower tablets
  *  - JASTEC USB touch controller/DigiTech DTR-02U
  *  - Zytronic capacitive touchscreen
+ *  - NEXIO/iNexio
  *
  * Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch>
  * Copyright (C) by Todd E. Johnson (mtouchusb.c)
@@ -95,6 +96,7 @@ struct usbtouch_device_info {
 
 	int  (*read_data)   (struct usbtouch_usb *usbtouch, unsigned char *pkt);
 	int  (*init)        (struct usbtouch_usb *usbtouch);
+	void (*exit)	    (struct usbtouch_usb *usbtouch);
 };
 
 /* a usbtouch device */
@@ -104,11 +106,12 @@ struct usbtouch_usb {
 	unsigned char *buffer;
 	int buf_len;
 	struct urb *irq;
-	struct usb_device *udev;
+	struct usb_interface *interface;
 	struct input_dev *input;
 	struct usbtouch_device_info *type;
 	char name[128];
 	char phys[64];
+	void *priv;
 
 	int x, y;
 	int touch, press;
@@ -133,6 +136,7 @@ enum {
 	DEVTYPE_E2I,
 	DEVTYPE_ZYTRONIC,
 	DEVTYPE_TC5UH,
+	DEVTYPE_NEXIO,
 };
 
 #define USB_DEVICE_HID_CLASS(vend, prod) \
@@ -144,7 +148,7 @@ enum {
 	.bInterfaceClass = USB_INTERFACE_CLASS_HID, \
 	.bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE
 
-static struct usb_device_id usbtouch_devices[] = {
+static const struct usb_device_id usbtouch_devices[] = {
 #ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
 	/* ignore the HID capable devices, handled by usbhid */
 	{USB_DEVICE_HID_CLASS(0x0eef, 0x0001), .driver_info = DEVTYPE_IGNORE},
@@ -222,6 +226,14 @@ static struct usb_device_id usbtouch_devices[] = {
 	{USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC5UH},
 #endif
 
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+	/* data interface only */
+	{USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x0a, 0x00, 0x00),
+		.driver_info = DEVTYPE_NEXIO},
+	{USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x0a, 0x00, 0x00),
+		.driver_info = DEVTYPE_NEXIO},
+#endif
+
 	{}
 };
 
@@ -234,8 +246,9 @@ static struct usb_device_id usbtouch_devices[] = {
 static int e2i_init(struct usbtouch_usb *usbtouch)
 {
 	int ret;
+	struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
 
-	ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 	                      0x01, 0x02, 0x0000, 0x0081,
 	                      NULL, 0, USB_CTRL_SET_TIMEOUT);
 
@@ -344,8 +357,9 @@ static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 static int mtouch_init(struct usbtouch_usb *usbtouch)
 {
 	int ret, i;
+	struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
 
-	ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 	                      MTOUCHUSB_RESET,
 	                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 	                      1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
@@ -356,7 +370,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
 	msleep(150);
 
 	for (i = 0; i < 3; i++) {
-		ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+		ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				      MTOUCHUSB_ASYNC_REPORT,
 				      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				      1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
@@ -489,7 +503,7 @@ static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 
 static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
 {
-	struct usb_device *dev = usbtouch->udev;
+	struct usb_device *dev = interface_to_usbdev(usbtouch->interface);
 	int ret = -ENOMEM;
 	unsigned char *buf;
 
@@ -690,6 +704,229 @@ static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 #endif
 
 /*****************************************************************************
+ * NEXIO Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+
+#define NEXIO_TIMEOUT	5000
+#define NEXIO_BUFSIZE	1024
+#define NEXIO_THRESHOLD	50
+
+struct nexio_priv {
+	struct urb *ack;
+	unsigned char *ack_buf;
+};
+
+struct nexio_touch_packet {
+	u8	flags;		/* 0xe1 = touch, 0xe1 = release */
+	__be16	data_len;	/* total bytes of touch data */
+	__be16	x_len;		/* bytes for X axis */
+	__be16	y_len;		/* bytes for Y axis */
+	u8	data[];
+} __attribute__ ((packed));
+
+static unsigned char nexio_ack_pkt[2] = { 0xaa, 0x02 };
+static unsigned char nexio_init_pkt[4] = { 0x82, 0x04, 0x0a, 0x0f };
+
+static void nexio_ack_complete(struct urb *urb)
+{
+}
+
+static int nexio_init(struct usbtouch_usb *usbtouch)
+{
+	struct usb_device *dev = interface_to_usbdev(usbtouch->interface);
+	struct usb_host_interface *interface = usbtouch->interface->cur_altsetting;
+	struct nexio_priv *priv;
+	int ret = -ENOMEM;
+	int actual_len, i;
+	unsigned char *buf;
+	char *firmware_ver = NULL, *device_name = NULL;
+	int input_ep = 0, output_ep = 0;
+
+	/* find first input and output endpoint */
+	for (i = 0; i < interface->desc.bNumEndpoints; i++) {
+		if (!input_ep &&
+		    usb_endpoint_dir_in(&interface->endpoint[i].desc))
+			input_ep = interface->endpoint[i].desc.bEndpointAddress;
+		if (!output_ep &&
+		    usb_endpoint_dir_out(&interface->endpoint[i].desc))
+			output_ep = interface->endpoint[i].desc.bEndpointAddress;
+	}
+	if (!input_ep || !output_ep)
+		return -ENXIO;
+
+	buf = kmalloc(NEXIO_BUFSIZE, GFP_KERNEL);
+	if (!buf)
+		goto out_buf;
+
+	/* two empty reads */
+	for (i = 0; i < 2; i++) {
+		ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep),
+				   buf, NEXIO_BUFSIZE, &actual_len,
+				   NEXIO_TIMEOUT);
+		if (ret < 0)
+			goto out_buf;
+	}
+
+	/* send init command */
+	memcpy(buf, nexio_init_pkt, sizeof(nexio_init_pkt));
+	ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, output_ep),
+			   buf, sizeof(nexio_init_pkt), &actual_len,
+			   NEXIO_TIMEOUT);
+	if (ret < 0)
+		goto out_buf;
+
+	/* read replies */
+	for (i = 0; i < 3; i++) {
+		memset(buf, 0, NEXIO_BUFSIZE);
+		ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep),
+				   buf, NEXIO_BUFSIZE, &actual_len,
+				   NEXIO_TIMEOUT);
+		if (ret < 0 || actual_len < 1 || buf[1] != actual_len)
+			continue;
+		switch (buf[0]) {
+		case 0x83:	/* firmware version */
+			if (!firmware_ver)
+				firmware_ver = kstrdup(&buf[2], GFP_KERNEL);
+			break;
+		case 0x84:	/* device name */
+			if (!device_name)
+				device_name = kstrdup(&buf[2], GFP_KERNEL);
+			break;
+		}
+	}
+
+	printk(KERN_INFO "Nexio device: %s, firmware version: %s\n",
+	       device_name, firmware_ver);
+
+	kfree(firmware_ver);
+	kfree(device_name);
+
+	/* prepare ACK URB */
+	ret = -ENOMEM;
+
+	usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL);
+	if (!usbtouch->priv)
+		goto out_buf;
+
+	priv = usbtouch->priv;
+
+	priv->ack_buf = kmalloc(sizeof(nexio_ack_pkt), GFP_KERNEL);
+	if (!priv->ack_buf)
+		goto err_priv;
+
+	memcpy(priv->ack_buf, nexio_ack_pkt, sizeof(nexio_ack_pkt));
+
+	priv->ack = usb_alloc_urb(0, GFP_KERNEL);
+	if (!priv->ack) {
+		dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__);
+		goto err_ack_buf;
+	}
+
+	usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep),
+			  priv->ack_buf, sizeof(nexio_ack_pkt),
+			  nexio_ack_complete, usbtouch);
+	ret = 0;
+	goto out_buf;
+
+err_ack_buf:
+	kfree(priv->ack_buf);
+err_priv:
+	kfree(priv);
+out_buf:
+	kfree(buf);
+	return ret;
+}
+
+static void nexio_exit(struct usbtouch_usb *usbtouch)
+{
+	struct nexio_priv *priv = usbtouch->priv;
+
+	usb_kill_urb(priv->ack);
+	usb_free_urb(priv->ack);
+	kfree(priv->ack_buf);
+	kfree(priv);
+}
+
+static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt)
+{
+	int x, y, begin_x, begin_y, end_x, end_y, w, h, ret;
+	struct nexio_touch_packet *packet = (void *) pkt;
+	struct nexio_priv *priv = usbtouch->priv;
+
+	/* got touch data? */
+	if ((pkt[0] & 0xe0) != 0xe0)
+		return 0;
+
+	/* send ACK */
+	ret = usb_submit_urb(priv->ack, GFP_ATOMIC);
+
+	if (!usbtouch->type->max_xc) {
+		usbtouch->type->max_xc = 2 * be16_to_cpu(packet->x_len);
+		input_set_abs_params(usbtouch->input, ABS_X, 0,
+				     2 * be16_to_cpu(packet->x_len), 0, 0);
+		usbtouch->type->max_yc = 2 * be16_to_cpu(packet->y_len);
+		input_set_abs_params(usbtouch->input, ABS_Y, 0,
+				     2 * be16_to_cpu(packet->y_len), 0, 0);
+	}
+	/*
+	 * The device reports state of IR sensors on X and Y axes.
+	 * Each byte represents "darkness" percentage (0-100) of one element.
+	 * 17" touchscreen reports only 64 x 52 bytes so the resolution is low.
+	 * This also means that there's a limited multi-touch capability but
+	 * it's disabled (and untested) here as there's no X driver for that.
+	 */
+	begin_x = end_x = begin_y = end_y = -1;
+	for (x = 0; x < be16_to_cpu(packet->x_len); x++) {
+		if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) {
+			begin_x = x;
+			continue;
+		}
+		if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) {
+			end_x = x - 1;
+			for (y = be16_to_cpu(packet->x_len);
+			     y < be16_to_cpu(packet->data_len); y++) {
+				if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) {
+					begin_y = y - be16_to_cpu(packet->x_len);
+					continue;
+				}
+				if (end_y == -1 &&
+				    begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) {
+					end_y = y - 1 - be16_to_cpu(packet->x_len);
+					w = end_x - begin_x;
+					h = end_y - begin_y;
+#if 0
+					/* multi-touch */
+					input_report_abs(usbtouch->input,
+						    ABS_MT_TOUCH_MAJOR, max(w,h));
+					input_report_abs(usbtouch->input,
+						    ABS_MT_TOUCH_MINOR, min(x,h));
+					input_report_abs(usbtouch->input,
+						    ABS_MT_POSITION_X, 2*begin_x+w);
+					input_report_abs(usbtouch->input,
+						    ABS_MT_POSITION_Y, 2*begin_y+h);
+					input_report_abs(usbtouch->input,
+						    ABS_MT_ORIENTATION, w > h);
+					input_mt_sync(usbtouch->input);
+#endif
+					/* single touch */
+					usbtouch->x = 2 * begin_x + w;
+					usbtouch->y = 2 * begin_y + h;
+					usbtouch->touch = packet->flags & 0x01;
+					begin_y = end_y = -1;
+					return 1;
+				}
+			}
+			begin_x = end_x = -1;
+		}
+
+	}
+	return 0;
+}
+#endif
+
+
+/*****************************************************************************
  * the different device descriptors
  */
 #ifdef MULTI_PACKET
@@ -873,6 +1110,16 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 		.read_data	= tc5uh_read_data,
 	},
 #endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+	[DEVTYPE_NEXIO] = {
+		.rept_size	= 128,
+		.irq_always	= true,
+		.read_data	= nexio_read_data,
+		.init		= nexio_init,
+		.exit		= nexio_exit,
+	},
+#endif
 };
 
 
@@ -998,6 +1245,7 @@ static void usbtouch_irq(struct urb *urb)
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
+	case -EPIPE:
 		/* this urb is terminated, clean up */
 		dbg("%s - urb shutting down with status: %d",
 		    __func__, urb->status);
@@ -1021,7 +1269,7 @@ static int usbtouch_open(struct input_dev *input)
 {
 	struct usbtouch_usb *usbtouch = input_get_drvdata(input);
 
-	usbtouch->irq->dev = usbtouch->udev;
+	usbtouch->irq->dev = interface_to_usbdev(usbtouch->interface);
 
 	if (!usbtouch->type->irq_always) {
 		if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
@@ -1048,13 +1296,23 @@ static void usbtouch_free_buffers(struct usb_device *udev,
 	kfree(usbtouch->buffer);
 }
 
+static struct usb_endpoint_descriptor *
+usbtouch_get_input_endpoint(struct usb_host_interface *interface)
+{
+	int i;
+
+	for (i = 0; i < interface->desc.bNumEndpoints; i++)
+		if (usb_endpoint_dir_in(&interface->endpoint[i].desc))
+			return &interface->endpoint[i].desc;
+
+	return NULL;
+}
 
 static int usbtouch_probe(struct usb_interface *intf,
 			  const struct usb_device_id *id)
 {
 	struct usbtouch_usb *usbtouch;
 	struct input_dev *input_dev;
-	struct usb_host_interface *interface;
 	struct usb_endpoint_descriptor *endpoint;
 	struct usb_device *udev = interface_to_usbdev(intf);
 	struct usbtouch_device_info *type;
@@ -1064,8 +1322,9 @@ static int usbtouch_probe(struct usb_interface *intf,
 	if (id->driver_info == DEVTYPE_IGNORE)
 		return -ENODEV;
 
-	interface = intf->cur_altsetting;
-	endpoint = &interface->endpoint[0].desc;
+	endpoint = usbtouch_get_input_endpoint(intf->cur_altsetting);
+	if (!endpoint)
+		return -ENXIO;
 
 	usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL);
 	input_dev = input_allocate_device();
@@ -1094,7 +1353,7 @@ static int usbtouch_probe(struct usb_interface *intf,
 		goto out_free_buffers;
 	}
 
-	usbtouch->udev = udev;
+	usbtouch->interface = intf;
 	usbtouch->input = input_dev;
 
 	if (udev->manufacturer)
@@ -1133,12 +1392,18 @@ static int usbtouch_probe(struct usb_interface *intf,
 		input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press,
 		                     type->max_press, 0, 0);
 
-	usb_fill_int_urb(usbtouch->irq, usbtouch->udev,
-			 usb_rcvintpipe(usbtouch->udev, endpoint->bEndpointAddress),
+	if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT)
+		usb_fill_int_urb(usbtouch->irq, udev,
+			 usb_rcvintpipe(udev, endpoint->bEndpointAddress),
 			 usbtouch->data, type->rept_size,
 			 usbtouch_irq, usbtouch, endpoint->bInterval);
+	else
+		usb_fill_bulk_urb(usbtouch->irq, udev,
+			 usb_rcvbulkpipe(udev, endpoint->bEndpointAddress),
+			 usbtouch->data, type->rept_size,
+			 usbtouch_irq, usbtouch);
 
-	usbtouch->irq->dev = usbtouch->udev;
+	usbtouch->irq->dev = udev;
 	usbtouch->irq->transfer_dma = usbtouch->data_dma;
 	usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
@@ -1147,23 +1412,37 @@ static int usbtouch_probe(struct usb_interface *intf,
 		err = type->init(usbtouch);
 		if (err) {
 			dbg("%s - type->init() failed, err: %d", __func__, err);
-			goto out_free_buffers;
+			goto out_free_urb;
 		}
 	}
 
 	err = input_register_device(usbtouch->input);
 	if (err) {
 		dbg("%s - input_register_device failed, err: %d", __func__, err);
-		goto out_free_buffers;
+		goto out_do_exit;
 	}
 
 	usb_set_intfdata(intf, usbtouch);
 
-	if (usbtouch->type->irq_always)
-		usb_submit_urb(usbtouch->irq, GFP_KERNEL);
+	if (usbtouch->type->irq_always) {
+		err = usb_submit_urb(usbtouch->irq, GFP_KERNEL);
+		if (err) {
+			err("%s - usb_submit_urb failed with result: %d",
+			    __func__, err);
+			goto out_unregister_input;
+		}
+	}
 
 	return 0;
 
+out_unregister_input:
+	input_unregister_device(input_dev);
+	input_dev = NULL;
+out_do_exit:
+	if (type->exit)
+		type->exit(usbtouch);
+out_free_urb:
+	usb_free_urb(usbtouch->irq);
 out_free_buffers:
 	usbtouch_free_buffers(udev, usbtouch);
 out_free:
@@ -1186,6 +1465,8 @@ static void usbtouch_disconnect(struct usb_interface *intf)
 	/* this will stop IO via close */
 	input_unregister_device(usbtouch->input);
 	usb_free_urb(usbtouch->irq);
+	if (usbtouch->type->exit)
+		usbtouch->type->exit(usbtouch);
 	usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
 	kfree(usbtouch);
 }
diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c
index eca54dbdf493..048849867643 100644
--- a/drivers/input/touchscreen/zylonite-wm97xx.c
+++ b/drivers/input/touchscreen/zylonite-wm97xx.c
@@ -118,6 +118,9 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm)
 		if (pressure)
 			p = MODR;
 
+		dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n",
+			x, y, p);
+
 		/* are samples valid */
 		if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X ||
 		    (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y ||
diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c
index c721c0a23eb8..d30436fee476 100644
--- a/drivers/input/xen-kbdfront.c
+++ b/drivers/input/xen-kbdfront.c
@@ -321,7 +321,7 @@ InitWait:
 	}
 }
 
-static struct xenbus_device_id xenkbd_ids[] = {
+static const struct xenbus_device_id xenkbd_ids[] = {
 	{ "vkbd" },
 	{ "" }
 };
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 3d906833948d..fd85bde283a0 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -171,8 +171,8 @@ config INPUT_ADBHID
 	  If unsure, say Y.
 
 config MAC_EMUMOUSEBTN
-	bool "Support for mouse button 2+3 emulation"
-	select INPUT
+	tristate "Support for mouse button 2+3 emulation"
+	depends on SYSCTL && INPUT
 	help
 	  This provides generic support for emulating the 2nd and 3rd mouse
 	  button with keypresses.  If you say Y here, the emulation is still
@@ -184,6 +184,9 @@ config MAC_EMUMOUSEBTN
 
 	  If you have an Apple machine with a 1-button mouse, say Y here.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called mac_hid.
+
 config THERM_WINDTUNNEL
 	tristate "Support for thermal management on Windtunnel G4s"
 	depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c
index 7b4ef5bb556b..e943d2a29253 100644
--- a/drivers/macintosh/mac_hid.c
+++ b/drivers/macintosh/mac_hid.c
@@ -13,17 +13,197 @@
 #include <linux/sysctl.h>
 #include <linux/input.h>
 #include <linux/module.h>
-#include <linux/kbd_kern.h>
 
+MODULE_LICENSE("GPL");
 
-static struct input_dev *emumousebtn;
-static int emumousebtn_input_register(void);
 static int mouse_emulate_buttons;
 static int mouse_button2_keycode = KEY_RIGHTCTRL;	/* right control key */
 static int mouse_button3_keycode = KEY_RIGHTALT;	/* right option key */
-static int mouse_last_keycode;
 
-#if defined(CONFIG_SYSCTL)
+static struct input_dev *mac_hid_emumouse_dev;
+
+static int mac_hid_create_emumouse(void)
+{
+	static struct lock_class_key mac_hid_emumouse_dev_event_class;
+	static struct lock_class_key mac_hid_emumouse_dev_mutex_class;
+	int err;
+
+	mac_hid_emumouse_dev = input_allocate_device();
+	if (!mac_hid_emumouse_dev)
+		return -ENOMEM;
+
+	lockdep_set_class(&mac_hid_emumouse_dev->event_lock,
+			  &mac_hid_emumouse_dev_event_class);
+	lockdep_set_class(&mac_hid_emumouse_dev->mutex,
+			  &mac_hid_emumouse_dev_mutex_class);
+
+	mac_hid_emumouse_dev->name = "Macintosh mouse button emulation";
+	mac_hid_emumouse_dev->id.bustype = BUS_ADB;
+	mac_hid_emumouse_dev->id.vendor = 0x0001;
+	mac_hid_emumouse_dev->id.product = 0x0001;
+	mac_hid_emumouse_dev->id.version = 0x0100;
+
+	mac_hid_emumouse_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
+	mac_hid_emumouse_dev->keybit[BIT_WORD(BTN_MOUSE)] =
+		BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
+	mac_hid_emumouse_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
+
+	err = input_register_device(mac_hid_emumouse_dev);
+	if (err) {
+		input_free_device(mac_hid_emumouse_dev);
+		mac_hid_emumouse_dev = NULL;
+		return err;
+	}
+
+	return 0;
+}
+
+static void mac_hid_destroy_emumouse(void)
+{
+	input_unregister_device(mac_hid_emumouse_dev);
+	mac_hid_emumouse_dev = NULL;
+}
+
+static bool mac_hid_emumouse_filter(struct input_handle *handle,
+				    unsigned int type, unsigned int code,
+				    int value)
+{
+	unsigned int btn;
+
+	if (type != EV_KEY)
+		return false;
+
+	if (code == mouse_button2_keycode)
+		btn = BTN_MIDDLE;
+	else if (code == mouse_button3_keycode)
+		btn = BTN_RIGHT;
+	else
+		return false;
+
+	input_report_key(mac_hid_emumouse_dev, btn, value);
+	input_sync(mac_hid_emumouse_dev);
+
+	return true;
+}
+
+static int mac_hid_emumouse_connect(struct input_handler *handler,
+				    struct input_dev *dev,
+				    const struct input_device_id *id)
+{
+	struct input_handle *handle;
+	int error;
+
+	/* Don't bind to ourselves */
+	if (dev == mac_hid_emumouse_dev)
+		return -ENODEV;
+
+	handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL);
+	if (!handle)
+		return -ENOMEM;
+
+	handle->dev = dev;
+	handle->handler = handler;
+	handle->name = "mac-button-emul";
+
+	error = input_register_handle(handle);
+	if (error) {
+		printk(KERN_ERR
+			"mac_hid: Failed to register button emulation handle, "
+			"error %d\n", error);
+		goto err_free;
+	}
+
+	error = input_open_device(handle);
+	if (error) {
+		printk(KERN_ERR
+			"mac_hid: Failed to open input device, error %d\n",
+			error);
+		goto err_unregister;
+	}
+
+	return 0;
+
+ err_unregister:
+	input_unregister_handle(handle);
+ err_free:
+	kfree(handle);
+	return error;
+}
+
+static void mac_hid_emumouse_disconnect(struct input_handle *handle)
+{
+	input_close_device(handle);
+	input_unregister_handle(handle);
+	kfree(handle);
+}
+
+static const struct input_device_id mac_hid_emumouse_ids[] = {
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+	},
+	{ },
+};
+
+MODULE_DEVICE_TABLE(input, mac_hid_emumouse_ids);
+
+static struct input_handler mac_hid_emumouse_handler = {
+	.filter		= mac_hid_emumouse_filter,
+	.connect	= mac_hid_emumouse_connect,
+	.disconnect	= mac_hid_emumouse_disconnect,
+	.name		= "mac-button-emul",
+	.id_table	= mac_hid_emumouse_ids,
+};
+
+static int mac_hid_start_emulation(void)
+{
+	int err;
+
+	err = mac_hid_create_emumouse();
+	if (err)
+		return err;
+
+	err = input_register_handler(&mac_hid_emumouse_handler);
+	if (err) {
+		mac_hid_destroy_emumouse();
+		return err;
+	}
+
+	return 0;
+}
+
+static void mac_hid_stop_emulation(void)
+{
+	input_unregister_handler(&mac_hid_emumouse_handler);
+	mac_hid_destroy_emumouse();
+}
+
+static int mac_hid_toggle_emumouse(ctl_table *table, int write,
+				   void __user *buffer, size_t *lenp,
+				   loff_t *ppos)
+{
+	int *valp = table->data;
+	int old_val = *valp;
+	int rc;
+
+	rc = proc_dointvec(table, write, buffer, lenp, ppos);
+
+	if (rc == 0 && write && *valp != old_val) {
+		if (*valp == 1)
+			rc = mac_hid_start_emulation();
+		else if (*valp == 0)
+			mac_hid_stop_emulation();
+		else
+			rc = -EINVAL;
+	}
+
+	/* Restore the old value in case of error */
+	if (rc)
+		*valp = old_val;
+
+	return rc;
+}
+
 /* file(s) in /proc/sys/dev/mac_hid */
 static ctl_table mac_hid_files[] = {
 	{
@@ -31,7 +211,7 @@ static ctl_table mac_hid_files[] = {
 		.data		= &mouse_emulate_buttons,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
+		.proc_handler	= mac_hid_toggle_emumouse,
 	},
 	{
 		.procname	= "mouse_button2_keycode",
@@ -74,75 +254,21 @@ static ctl_table mac_hid_root_dir[] = {
 
 static struct ctl_table_header *mac_hid_sysctl_header;
 
-#endif /* endif CONFIG_SYSCTL */
-
-int mac_hid_mouse_emulate_buttons(int caller, unsigned int keycode, int down)
-{
-	switch (caller) {
-	case 1:
-		/* Called from keyboard.c */
-		if (mouse_emulate_buttons
-		    && (keycode == mouse_button2_keycode
-			|| keycode == mouse_button3_keycode)) {
-			if (mouse_emulate_buttons == 1) {
-				input_report_key(emumousebtn,
-						 keycode == mouse_button2_keycode ? BTN_MIDDLE : BTN_RIGHT,
-						 down);
-				input_sync(emumousebtn);
-				return 1;
-			}
-			mouse_last_keycode = down ? keycode : 0;
-		}
-		break;
-	}
-	return 0;
-}
-
-static struct lock_class_key emumousebtn_event_class;
-static struct lock_class_key emumousebtn_mutex_class;
-
-static int emumousebtn_input_register(void)
+static int __init mac_hid_init(void)
 {
-	int ret;
-
-	emumousebtn = input_allocate_device();
-	if (!emumousebtn)
+	mac_hid_sysctl_header = register_sysctl_table(mac_hid_root_dir);
+	if (!mac_hid_sysctl_header)
 		return -ENOMEM;
 
-	lockdep_set_class(&emumousebtn->event_lock, &emumousebtn_event_class);
-	lockdep_set_class(&emumousebtn->mutex, &emumousebtn_mutex_class);
-
-	emumousebtn->name = "Macintosh mouse button emulation";
-	emumousebtn->id.bustype = BUS_ADB;
-	emumousebtn->id.vendor = 0x0001;
-	emumousebtn->id.product = 0x0001;
-	emumousebtn->id.version = 0x0100;
-
-	emumousebtn->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
-	emumousebtn->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
-		BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
-	emumousebtn->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
-
-	ret = input_register_device(emumousebtn);
-	if (ret)
-		input_free_device(emumousebtn);
-
-	return ret;
+	return 0;
 }
+module_init(mac_hid_init);
 
-static int __init mac_hid_init(void)
+static void __exit mac_hid_exit(void)
 {
-	int err;
-
-	err = emumousebtn_input_register();
-	if (err)
-		return err;
-
-#if defined(CONFIG_SYSCTL)
-	mac_hid_sysctl_header = register_sysctl_table(mac_hid_root_dir);
-#endif /* CONFIG_SYSCTL */
+	unregister_sysctl_table(mac_hid_sysctl_header);
 
-	return 0;
+	if (mouse_emulate_buttons)
+		mac_hid_stop_emulation();
 }
-
-device_initcall(mac_hid_init);
+module_exit(mac_hid_exit);